[PATCH][krogoth 1/2] libgcrypt: fix CVE-2017-7526

[PATCH][krogoth 1/2] libgcrypt: fix CVE-2017-7526

[Ross Burton]

Fixes CVE-2017-7526, 'flush+reload side-channel attack on RSA secret keys dubbed
"Sliding right into disaster"'.

Signed-off-by: Ross Burton <ross.burton@intel.com>
---
 .../libgcrypt/files/CVE-2017-7526.patch            | 455 +++++++++++++++++++++
 meta/recipes-support/libgcrypt/libgcrypt.inc       |   1 +
 2 files changed, 456 insertions(+)
 create mode 100644 meta/recipes-support/libgcrypt/files/CVE-2017-7526.patch

diff --git a/meta/recipes-support/libgcrypt/files/CVE-2017-7526.patch b/meta/recipes-support/libgcrypt/files/CVE-2017-7526.patch
new file mode 100644
index 00000000000..c9541d44f3f
--- /dev/null
+++ b/meta/recipes-support/libgcrypt/files/CVE-2017-7526.patch
@@ -0,0 +1,455 @@
+Flush+reload side-channel attack on RSA secret keys dubbed "Sliding right
+into disaster".
+
+CVE: CVE-2017-7526
+Upstream-Status: Backport
+Signed-off-by: Ross Burton <ross.burton@intel.com>
+
+From 8ae178108eb3c64b40dcb4d1c1943205a86db724 Mon Sep 17 00:00:00 2001
+From: NIIBE Yutaka <gniibe@fsij.org>
+Date: Tue, 4 Apr 2017 17:38:05 +0900
+Subject: [PATCH 1/5] mpi: Simplify mpi_powm.
+
+* mpi/mpi-pow.c (_gcry_mpi_powm): Simplify the loop.
+
+--
+
+This fix is not a solution for the problem reported (yet).  The
+problem is that the current algorithm of _gcry_mpi_powm depends on
+exponent and some information leaks is possible.
+
+Reported-by: Andreas Zankl <andreas.zankl@aisec.fraunhofer.de>
+Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
+
+(backport from master commit:
+719468e53133d3bdf12156c5bfdea2bf15f9f6f1)
+
+Signed-off-by: Ross Burton <ross.burton@intel.com>
+---
+ mpi/mpi-pow.c | 105 +++++++++++++++++-----------------------------------------
+ 1 file changed, 30 insertions(+), 75 deletions(-)
+
+diff --git a/mpi/mpi-pow.c b/mpi/mpi-pow.c
+index 70bf9e84..c00cfed3 100644
+--- a/mpi/mpi-pow.c
++++ b/mpi/mpi-pow.c
+@@ -613,12 +613,8 @@ _gcry_mpi_powm (gcry_mpi_t res,
+       if (e == 0)
+         {
+           j += c;
+-          i--;
+-          if ( i < 0 )
+-            {
+-              c = 0;
+-              break;
+-            }
++          if ( --i < 0 )
++            break;
+ 
+           e = ep[i];
+           c = BITS_PER_MPI_LIMB;
+@@ -633,38 +629,33 @@ _gcry_mpi_powm (gcry_mpi_t res,
+           c -= c0;
+           j += c0;
+ 
++          e0 = (e >> (BITS_PER_MPI_LIMB - W));
+           if (c >= W)
+-            {
+-              e0 = (e >> (BITS_PER_MPI_LIMB - W));
+-              e = (e << W);
+-              c -= W;
+-            }
++            c0 = 0;
+           else
+             {
+-              i--;
+-              if ( i < 0 )
++              if ( --i < 0 )
+                 {
+-                  e = (e >> (BITS_PER_MPI_LIMB - c));
+-                  break;
++                  e0 = (e >> (BITS_PER_MPI_LIMB - c));
++                  j += c - W;
++                  goto last_step;
++                }
++              else
++                {
++                  c0 = c;
++                  e = ep[i];
++                  c = BITS_PER_MPI_LIMB;
++                  e0 |= (e >> (BITS_PER_MPI_LIMB - (W - c0)));
+                 }
+-
+-              c0 = c;
+-              e0 = (e >> (BITS_PER_MPI_LIMB - W))
+-                | (ep[i] >> (BITS_PER_MPI_LIMB - W + c0));
+-              e = (ep[i] << (W - c0));
+-              c = BITS_PER_MPI_LIMB - W + c0;
+             }
+ 
++          e = e << (W - c0);
++          c -= (W - c0);
++
++        last_step:
+           count_trailing_zeros (c0, e0);
+           e0 = (e0 >> c0) >> 1;
+ 
+-          for (j += W - c0; j; j--)
+-            {
+-              mul_mod (xp, &xsize, rp, rsize, rp, rsize, mp, msize, &karactx);
+-              tp = rp; rp = xp; xp = tp;
+-              rsize = xsize;
+-            }
+-
+           /*
+            *  base_u <= precomp[e0]
+            *  base_u_size <= precomp_size[e0]
+@@ -681,25 +672,23 @@ _gcry_mpi_powm (gcry_mpi_t res,
+               u.d = precomp[k];
+ 
+               mpi_set_cond (&w, &u, k == e0);
+-              base_u_size |= (precomp_size[k] & ((mpi_size_t)0 - (k == e0)) );
++              base_u_size |= ( precomp_size[k] & ((mpi_size_t)0 - (k == e0)) );
+             }
+ 
+-          mul_mod (xp, &xsize, rp, rsize, base_u, base_u_size,
+-                   mp, msize, &karactx);
+-          tp = rp; rp = xp; xp = tp;
+-          rsize = xsize;
++          for (j += W - c0; j >= 0; j--)
++            {
++              mul_mod (xp, &xsize, rp, rsize,
++                       j == 0 ? base_u : rp, j == 0 ? base_u_size : rsize,
++                       mp, msize, &karactx);
++              tp = rp; rp = xp; xp = tp;
++              rsize = xsize;
++            }
+ 
+           j = c0;
++          if ( i < 0 )
++            break;
+         }
+ 
+-    if (c != 0)
+-      {
+-        j += c;
+-        count_trailing_zeros (c, e);
+-        e = (e >> c);
+-        j -= c;
+-      }
+-
+     while (j--)
+       {
+         mul_mod (xp, &xsize, rp, rsize, rp, rsize, mp, msize, &karactx);
+@@ -707,40 +696,6 @@ _gcry_mpi_powm (gcry_mpi_t res,
+         rsize = xsize;
+       }
+ 
+-    if (e != 0)
+-      {
+-        /*
+-         * base_u <= precomp[(e>>1)]
+-         * base_u_size <= precomp_size[(e>>1)]
+-         */
+-        base_u_size = 0;
+-        for (k = 0; k < (1<< (W - 1)); k++)
+-          {
+-            struct gcry_mpi w, u;
+-            w.alloced = w.nlimbs = precomp_size[k];
+-            u.alloced = u.nlimbs = precomp_size[k];
+-            w.sign = u.sign = 0;
+-            w.flags = u.flags = 0;
+-            w.d = base_u;
+-            u.d = precomp[k];
+-
+-            mpi_set_cond (&w, &u, k == (e>>1));
+-            base_u_size |= (precomp_size[k] & ((mpi_size_t)0 - (k == (e>>1))) );
+-          }
+-
+-        mul_mod (xp, &xsize, rp, rsize, base_u, base_u_size,
+-                 mp, msize, &karactx);
+-        tp = rp; rp = xp; xp = tp;
+-        rsize = xsize;
+-
+-        for (; c; c--)
+-          {
+-            mul_mod (xp, &xsize, rp, rsize, rp, rsize, mp, msize, &karactx);
+-            tp = rp; rp = xp; xp = tp;
+-            rsize = xsize;
+-          }
+-      }
+-
+     /* We shifted MOD, the modulo reduction argument, left
+        MOD_SHIFT_CNT steps.  Adjust the result by reducing it with the
+        original MOD.
+-- 
+2.11.0
+
+
+From ab6d34849f33d16e1da2b09e3d938bcb0f48f682 Mon Sep 17 00:00:00 2001
+From: NIIBE Yutaka <gniibe@fsij.org>
+Date: Sat, 24 Jun 2017 20:46:20 +0900
+Subject: [PATCH 2/5] Same computation for square and multiply.
+
+* mpi/mpi-pow.c (_gcry_mpi_powm): Compare msize for max_u_size.  Move
+the assignment to base_u into the loop.  Copy content refered by RP to
+BASE_U except the last of the loop.
+
+--
+
+Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
+(backport from master commit:
+78130828e9a140a9de4dafadbc844dbb64cb709a)
+
+Signed-off-by: Ross Burton <ross.burton@intel.com>
+---
+ mpi/mpi-pow.c | 50 +++++++++++++++++++++++++++++---------------------
+ 1 file changed, 29 insertions(+), 21 deletions(-)
+
+diff --git a/mpi/mpi-pow.c b/mpi/mpi-pow.c
+index c00cfed3..0d74f28c 100644
+--- a/mpi/mpi-pow.c
++++ b/mpi/mpi-pow.c
+@@ -577,6 +577,8 @@ _gcry_mpi_powm (gcry_mpi_t res,
+         MPN_COPY (precomp[i], rp, rsize);
+       }
+ 
++    if (msize > max_u_size)
++      max_u_size = msize;
+     base_u = mpi_alloc_limb_space (max_u_size, esec);
+     MPN_ZERO (base_u, max_u_size);
+ 
+@@ -623,6 +625,10 @@ _gcry_mpi_powm (gcry_mpi_t res,
+         {
+           int c0;
+           mpi_limb_t e0;
++          struct gcry_mpi w, u;
++          w.sign = u.sign = 0;
++          w.flags = u.flags = 0;
++          w.d = base_u;
+ 
+           count_leading_zeros (c0, e);
+           e = (e << c0);
+@@ -656,29 +662,31 @@ _gcry_mpi_powm (gcry_mpi_t res,
+           count_trailing_zeros (c0, e0);
+           e0 = (e0 >> c0) >> 1;
+ 
+-          /*
+-           *  base_u <= precomp[e0]
+-           *  base_u_size <= precomp_size[e0]
+-           */
+-          base_u_size = 0;
+-          for (k = 0; k < (1<< (W - 1)); k++)
+-            {
+-              struct gcry_mpi w, u;
+-              w.alloced = w.nlimbs = precomp_size[k];
+-              u.alloced = u.nlimbs = precomp_size[k];
+-              w.sign = u.sign = 0;
+-              w.flags = u.flags = 0;
+-              w.d = base_u;
+-              u.d = precomp[k];
+-
+-              mpi_set_cond (&w, &u, k == e0);
+-              base_u_size |= ( precomp_size[k] & ((mpi_size_t)0 - (k == e0)) );
+-            }
+-
+           for (j += W - c0; j >= 0; j--)
+             {
+-              mul_mod (xp, &xsize, rp, rsize,
+-                       j == 0 ? base_u : rp, j == 0 ? base_u_size : rsize,
++
++              /*
++               *  base_u <= precomp[e0]
++               *  base_u_size <= precomp_size[e0]
++               */
++              base_u_size = 0;
++              for (k = 0; k < (1<< (W - 1)); k++)
++                {
++                  w.alloced = w.nlimbs = precomp_size[k];
++                  u.alloced = u.nlimbs = precomp_size[k];
++                  u.d = precomp[k];
++
++                  mpi_set_cond (&w, &u, k == e0);
++                  base_u_size |= ( precomp_size[k] & (0UL - (k == e0)) );
++                }
++
++              w.alloced = w.nlimbs = rsize;
++              u.alloced = u.nlimbs = rsize;
++              u.d = rp;
++              mpi_set_cond (&w, &u, j != 0);
++              base_u_size ^= ((base_u_size ^ rsize)  & (0UL - (j != 0)));
++
++              mul_mod (xp, &xsize, rp, rsize, base_u, base_u_size,
+                        mp, msize, &karactx);
+               tp = rp; rp = xp; xp = tp;
+               rsize = xsize;
+-- 
+2.11.0
+
+
+From b5370d527612d2c453a366729f07892974b28ba8 Mon Sep 17 00:00:00 2001
+From: NIIBE Yutaka <gniibe@fsij.org>
+Date: Thu, 29 Jun 2017 11:48:44 +0900
+Subject: [PATCH 3/5] rsa: Add exponent blinding.
+
+* cipher/rsa.c (secret): Blind secret D with randomized nonce R for
+mpi_powm computation.
+
+--
+
+Co-authored-by: Werner Koch <wk@gnupg.org>
+Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
+
+The paper describing attack: https://eprint.iacr.org/2017/627
+
+Sliding right into disaster: Left-to-right sliding windows leak
+by Daniel J. Bernstein and Joachim Breitner and Daniel Genkin and
+Leon Groot Bruinderink and Nadia Heninger and Tanja Lange and
+Christine van Vredendaal and Yuval Yarom
+
+  It is well known that constant-time implementations of modular
+  exponentiation cannot use sliding windows. However, software
+  libraries such as Libgcrypt, used by GnuPG, continue to use sliding
+  windows. It is widely believed that, even if the complete pattern of
+  squarings and multiplications is observed through a side-channel
+  attack, the number of exponent bits leaked is not sufficient to
+  carry out a full key-recovery attack against RSA. Specifically,
+  4-bit sliding windows leak only 40% of the bits, and 5-bit sliding
+  windows leak only 33% of the bits.
+
+  In this paper we demonstrate a complete break of RSA-1024 as
+  implemented in Libgcrypt. Our attack makes essential use of the fact
+  that Libgcrypt uses the left-to-right method for computing the
+  sliding-window expansion. We show for the first time that the
+  direction of the encoding matters: the pattern of squarings and
+  multiplications in left-to-right sliding windows leaks significantly
+  more information about exponent bits than for right-to-left. We show
+  how to incorporate this additional information into the
+  Heninger-Shacham algorithm for partial key reconstruction, and use
+  it to obtain very efficient full key recovery for RSA-1024. We also
+  provide strong evidence that the same attack works for RSA-2048 with
+  only moderately more computation.
+
+Exponent blinding is a kind of workaround to add noise.  Signal (leak)
+is still there for non-constant-time implementation.
+
+(backported from master commit:
+8725c99ffa41778f382ca97233183bcd687bb0ce)
+
+Signed-off-by: Ross Burton <ross.burton@intel.com>
+---
+ cipher/rsa.c | 32 +++++++++++++++++++++++++-------
+ 1 file changed, 25 insertions(+), 7 deletions(-)
+
+diff --git a/cipher/rsa.c b/cipher/rsa.c
+index 0b98b6a8..d8658476 100644
+--- a/cipher/rsa.c
++++ b/cipher/rsa.c
+@@ -724,15 +724,33 @@ secret (gcry_mpi_t output, gcry_mpi_t input, RSA_secret_key *skey )
+       gcry_mpi_t m1 = mpi_alloc_secure( mpi_get_nlimbs(skey->n)+1 );
+       gcry_mpi_t m2 = mpi_alloc_secure( mpi_get_nlimbs(skey->n)+1 );
+       gcry_mpi_t h  = mpi_alloc_secure( mpi_get_nlimbs(skey->n)+1 );
+-
+-      /* m1 = c ^ (d mod (p-1)) mod p */
++      gcry_mpi_t D_blind = mpi_alloc_secure ( mpi_get_nlimbs(skey->n) + 1 );
++      gcry_mpi_t r;
++      unsigned int r_nbits;
++
++      r_nbits = mpi_get_nbits (skey->p) / 4;
++      if (r_nbits < 96)
++        r_nbits = 96;
++      r = mpi_alloc_secure ((r_nbits + BITS_PER_MPI_LIMB-1)/BITS_PER_MPI_LIMB);
++
++      /* d_blind = (d mod (p-1)) + (p-1) * r */
++      /* m1 = c ^ d_blind mod p */
++      _gcry_mpi_randomize (r, r_nbits, GCRY_WEAK_RANDOM);
++      mpi_set_highbit (r, r_nbits - 1);
+       mpi_sub_ui( h, skey->p, 1  );
+-      mpi_fdiv_r( h, skey->d, h );
+-      mpi_powm( m1, input, h, skey->p );
+-      /* m2 = c ^ (d mod (q-1)) mod q */
++      mpi_mul ( D_blind, h, r );
++      mpi_fdiv_r ( h, skey->d, h );
++      mpi_add ( D_blind, D_blind, h );
++      mpi_powm( m1, input, D_blind, skey->p );
++      /* d_blind = (d mod (q-1)) + (q-1) * r */
++      /* m2 = c ^ d_blind mod q */
++      _gcry_mpi_randomize (r, r_nbits, GCRY_WEAK_RANDOM);
++      mpi_set_highbit (r, r_nbits - 1);
+       mpi_sub_ui( h, skey->q, 1  );
+-      mpi_fdiv_r( h, skey->d, h );
+-      mpi_powm( m2, input, h, skey->q );
++      mpi_mul ( D_blind, h, r );
++      mpi_fdiv_r ( h, skey->d, h );
++      mpi_add ( D_blind, D_blind, h );
++      mpi_powm( m2, input, D_blind, skey->q );
+       /* h = u * ( m2 - m1 ) mod q */
+       mpi_sub( h, m2, m1 );
+       if ( mpi_has_sign ( h ) )
+-- 
+2.11.0
+
+
+From b7c572550b8759f2b0e45ee72df0494700b26da1 Mon Sep 17 00:00:00 2001
+From: NIIBE Yutaka <gniibe@fsij.org>
+Date: Thu, 29 Jun 2017 12:36:27 +0900
+Subject: [PATCH 4/5] rsa: Fix exponent blinding.
+
+* cipher/rsa.c (secret): Free D_BLIND.
+
+--
+
+Fixes-commit: a9f612def801c8145d551d995475e5d51a4c988c
+Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
+Signed-off-by: Ross Burton <ross.burton@intel.com>
+---
+ cipher/rsa.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/cipher/rsa.c b/cipher/rsa.c
+index d8658476..9474fe89 100644
+--- a/cipher/rsa.c
++++ b/cipher/rsa.c
+@@ -760,6 +760,7 @@ secret (gcry_mpi_t output, gcry_mpi_t input, RSA_secret_key *skey )
+       mpi_mul ( h, h, skey->p );
+       mpi_add ( output, m1, h );
+ 
++      mpi_free ( D_blind );
+       mpi_free ( h );
+       mpi_free ( m1 );
+       mpi_free ( m2 );
+-- 
+2.11.0
+
+
+From e5a5f14bdd8d6265f85264575a1f3c3307306849 Mon Sep 17 00:00:00 2001
+From: NIIBE Yutaka <gniibe@fsij.org>
+Date: Thu, 29 Jun 2017 12:40:19 +0900
+Subject: [PATCH 5/5] rsa: More fix.
+
+* cipher/rsa.c (secret): Free R.
+
+--
+
+Fixes-commit: a9f612def801c8145d551d995475e5d51a4c988c
+Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
+Signed-off-by: Ross Burton <ross.burton@intel.com>
+---
+ cipher/rsa.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/cipher/rsa.c b/cipher/rsa.c
+index 9474fe89..b151b39f 100644
+--- a/cipher/rsa.c
++++ b/cipher/rsa.c
+@@ -760,6 +760,7 @@ secret (gcry_mpi_t output, gcry_mpi_t input, RSA_secret_key *skey )
+       mpi_mul ( h, h, skey->p );
+       mpi_add ( output, m1, h );
+ 
++      mpi_free ( r );
+       mpi_free ( D_blind );
+       mpi_free ( h );
+       mpi_free ( m1 );
+-- 
+2.11.0
+
diff --git a/meta/recipes-support/libgcrypt/libgcrypt.inc b/meta/recipes-support/libgcrypt/libgcrypt.inc
index 5478253e068..404f870db03 100644
--- a/meta/recipes-support/libgcrypt/libgcrypt.inc
+++ b/meta/recipes-support/libgcrypt/libgcrypt.inc
@@ -18,6 +18,7 @@ SRC_URI = "ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-${PV}.tar.gz \
            file://add-pkgconfig-support.patch \
            file://libgcrypt-fix-building-error-with-O2-in-sysroot-path.patch \
            file://fix-ICE-failure-on-mips-with-option-O-and-g.patch \
+           file://CVE-2017-7526.patch \
 "
 
 BINCONFIG = "${bindir}/libgcrypt-config"
-- 
2.11.0

[PATCH][krogoth 2/2] libgcrypt: fix CVE-2017-9526

[Ross Burton]

In libgcrypt before 1.7.7, an attacker who learns the EdDSA session key (from
side-channel observation during the signing process) can easily recover the
long-term secret key. 1.7.7 makes a cipher/ecc-eddsa.c change to store this
session key in secure memory, to ensure that constant-time point operations are
used in the MPI library.

Signed-off-by: Ross Burton <ross.burton@intel.com>
---
 ...-Store-EdDSA-session-key-in-secure-memory.patch | 39 ++++++++++++++++++++++
 meta/recipes-support/libgcrypt/libgcrypt.inc       |  1 +
 2 files changed, 40 insertions(+)
 create mode 100644 meta/recipes-support/libgcrypt/files/0001-ecc-Store-EdDSA-session-key-in-secure-memory.patch

diff --git a/meta/recipes-support/libgcrypt/files/0001-ecc-Store-EdDSA-session-key-in-secure-memory.patch b/meta/recipes-support/libgcrypt/files/0001-ecc-Store-EdDSA-session-key-in-secure-memory.patch
new file mode 100644
index 00000000000..f6c4ca76f33
--- /dev/null
+++ b/meta/recipes-support/libgcrypt/files/0001-ecc-Store-EdDSA-session-key-in-secure-memory.patch
@@ -0,0 +1,39 @@
+CVE: CVE-2017-9526
+Upstream-Status: Backport
+Signed-off-by: Ross Burton <ross.burton@intel.com>
+
+From b3cab278eb9c2ceda79f980bc26460d97f260041 Mon Sep 17 00:00:00 2001
+From: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
+Date: Thu, 19 Jan 2017 17:00:15 +0100
+Subject: [PATCH] ecc: Store EdDSA session key in secure memory.
+
+* cipher/ecc-eddsa.c (_gcry_ecc_eddsa_sign): use mpi_snew to allocate
+session key.
+--
+
+An attacker who learns the EdDSA session key from side-channel
+observation during the signing process, can easily revover the long-
+term secret key. Storing the session key in secure memory ensures that
+constant time point operations are used in the MPI library.
+
+Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
+---
+ cipher/ecc-eddsa.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/cipher/ecc-eddsa.c b/cipher/ecc-eddsa.c
+index f91f8489..813e030d 100644
+--- a/cipher/ecc-eddsa.c
++++ b/cipher/ecc-eddsa.c
+@@ -603,7 +603,7 @@ _gcry_ecc_eddsa_sign (gcry_mpi_t input, ECC_secret_key *skey,
+   a = mpi_snew (0);
+   x = mpi_new (0);
+   y = mpi_new (0);
+-  r = mpi_new (0);
++  r = mpi_snew (0);
+   ctx = _gcry_mpi_ec_p_internal_new (skey->E.model, skey->E.dialect, 0,
+                                      skey->E.p, skey->E.a, skey->E.b);
+   b = (ctx->nbits+7)/8;
+-- 
+2.11.0
+
diff --git a/meta/recipes-support/libgcrypt/libgcrypt.inc b/meta/recipes-support/libgcrypt/libgcrypt.inc
index 404f870db03..8e7a38f8940 100644
--- a/meta/recipes-support/libgcrypt/libgcrypt.inc
+++ b/meta/recipes-support/libgcrypt/libgcrypt.inc
@@ -18,6 +18,7 @@ SRC_URI = "ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-${PV}.tar.gz \
            file://add-pkgconfig-support.patch \
            file://libgcrypt-fix-building-error-with-O2-in-sysroot-path.patch \
            file://fix-ICE-failure-on-mips-with-option-O-and-g.patch \
+           file://0001-ecc-Store-EdDSA-session-key-in-secure-memory.patch \
            file://CVE-2017-7526.patch \
 "
 
-- 
2.11.0

✗ patchtest: failure for "[krogoth] libgcrypt: fix CVE-2..." and 1 more

[Patchwork]

== Series Details ==

Series: "[krogoth] libgcrypt: fix CVE-2..." and 1 more
Revision: 1
URL   : https://patchwork.openembedded.org/series/7813/
State : failure

== Summary ==


Thank you for submitting this patch series to OpenEmbedded Core. This is
an automated response. Several tests have been executed on the proposed
series by patchtest resulting in the following failures:



* Patch            [krogoth,2/2] libgcrypt: fix CVE-2017-9526
 Issue             Missing or incorrectly formatted CVE tag in commit message [test_cve_presence_in_commit_message] 
  Suggested fix    Include a "CVE-xxxx-xxxx" tag in the commit message



If you believe any of these test results are incorrect, please reply to the
mailing list (openembedded-core@lists.openembedded.org) raising your concerns.
Otherwise we would appreciate you correcting the issues and submitting a new
version of the patchset if applicable. Please ensure you add/increment the
version number when sending the new version (i.e. [PATCH] -> [PATCH v2] ->
[PATCH v3] -> ...).

---
Test framework: http://git.yoctoproject.org/cgit/cgit.cgi/patchtest
Test suite:     http://git.yoctoproject.org/cgit/cgit.cgi/patchtest-oe