* [PATCH 1/1] uboot-sign.bbclass: fix signature and deployment
2018-11-30 2:26 [PATCH 0/1 V2] uboot-sign.bbclass: fix signature and deployment Robert Yang
@ 2018-11-30 2:26 ` Robert Yang
2018-11-30 2:33 ` ✗ patchtest: failure for uboot-sign.bbclass: fix signature and deployment (rev2) Patchwork
1 sibling, 0 replies; 4+ messages in thread
From: Robert Yang @ 2018-11-30 2:26 UTC (permalink / raw)
To: openembedded-core
Fixed:
MACHINE = "beaglebone-yocto"
KERNEL_CLASSES += "kernel-fitimage"
KERNEL_IMAGETYPE_beaglebone-yocto = "fitImage"
UBOOT_MACHINE_beaglebone-yocto = "am335x_boneblack_vboot_config"
UBOOT_MKIMAGE_DTCOPTS = "-I dts -O dtb -p 2000"
UBOOT_SIGN_KEYDIR = "${TOPDIR}/conf"
UBOOT_SIGN_KEYNAME = "dev"
UBOOT_SIGN_ENABLE = "1"
IMAGE_INSTALL_remove = "kernel-image-zimage"
$ cd conf
$ openssl genrsa -F4 -out dev.key 2048
$ openssl req -batch -new -x509 -key dev.key -out dev.crt
$ cd ../
$ bitbake u-boot linux-yocto
$ grep signature tmp/deploy/images/beaglebone-yocto/*.dtb
Binary file tmp/deploy/images/beaglebone-yocto/u-boot-beaglebone-yocto-2018.07-r0.dtb matches
Binary file tmp/deploy/images/beaglebone-yocto/u-boot-beaglebone-yocto.dtb matches
Binary file tmp/deploy/images/beaglebone-yocto/u-boot.dtb matches
And there would be no signature info when rebuild from sstate:
$ bitbake u-boot linux-yocto -cclean
$ bitbake u-boot linux-yocto
$ grep signature tmp/deploy/images/beaglebone-yocto/*.dtb
No result
This s because kernel directly edit ${DEPLOY_DIR_IMAGE}/u-boot.dtb, (Note, it
is global ${DEPLOY_DIR_IMAGE}, not recipe's DEPLOYDIR), so that the modified
info is not in sstate, and would be lost when rebuild from sstate.
There are other problems in previouse code:
- The u-boot.dtb is provided by u-boot, but edited by kernel during signing, so
it should be deployed by kernel rather than u-boot.
- The u-boot.do_concat_dtb directly install files to global ${DEPLOY_DIR_IMAGE},
this is incorrect, the ${DEPLOY_DIR_IMAGE} should be installed by do_deploy.
- It seems that it assumes do_deploy depends on do_install according the comments,
but they have no relationships:
# do_concat_dtb is scheduled _before_ do_install as it overwrite the
# u-boot.bin in both DEPLOYDIR and DEPLOY_IMAGE_DIR.
- The do_concat_dtb should be run after do_compile, but it doesn't have this
dependency.
Make u-boot install u-boot.dtb to ${datadir}, kernel copies u-boot.dtb from
${STAGING_DATADIR} to ${B} and deploy it can fix the problem.
[YOCTO #12112]
Reported-by: Christian Andersen <c.andersen@kostal.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
---
meta/classes/kernel-fitimage.bbclass | 17 ++++++-
meta/classes/uboot-sign.bbclass | 95 ++++++++++++++++++++----------------
meta/recipes-bsp/u-boot/u-boot.inc | 2 +-
3 files changed, 69 insertions(+), 45 deletions(-)
diff --git a/meta/classes/kernel-fitimage.bbclass b/meta/classes/kernel-fitimage.bbclass
index 328bef4..5f6380f 100644
--- a/meta/classes/kernel-fitimage.bbclass
+++ b/meta/classes/kernel-fitimage.bbclass
@@ -35,7 +35,7 @@ python __anonymous () {
# the fitImage:
if d.getVar('UBOOT_SIGN_ENABLE') == "1":
uboot_pn = d.getVar('PREFERRED_PROVIDER_u-boot') or 'u-boot'
- d.appendVarFlag('do_assemble_fitimage', 'depends', ' %s:do_deploy' % uboot_pn)
+ d.appendVarFlag('do_assemble_fitimage', 'depends', ' %s:do_populate_sysroot' % uboot_pn)
}
# Options for the device tree compiler passed to mkimage '-D' feature:
@@ -456,10 +456,17 @@ fitimage_assemble() {
# Step 7: Sign the image and add public key to U-Boot dtb
#
if [ "x${UBOOT_SIGN_ENABLE}" = "x1" ] ; then
+ add_key_to_u_boot=""
+ if [ -n "${UBOOT_DTB_BINARY}" ]; then
+ # The u-boot.dtb is a symlink to UBOOT_DTB_IMAGE, so we need copy
+ # both of them, and don't dereference the symlink.
+ cp -P ${STAGING_DATADIR}/u-boot*.dtb ${B}
+ add_key_to_u_boot="-K ${B}/${UBOOT_DTB_BINARY}"
+ fi
uboot-mkimage \
${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \
-F -k "${UBOOT_SIGN_KEYDIR}" \
- ${@'-K "${DEPLOY_DIR_IMAGE}/${UBOOT_DTB_BINARY}"' if len('${UBOOT_DTB_BINARY}') else ''} \
+ $add_key_to_u_boot \
-r arch/${ARCH}/boot/${2}
fi
}
@@ -505,5 +512,11 @@ kernel_do_deploy_append() {
install -m 0644 ${B}/arch/${ARCH}/boot/fitImage-${INITRAMFS_IMAGE} ${DEPLOYDIR}/fitImage-${INITRAMFS_IMAGE_NAME}-${KERNEL_FIT_NAME}.bin
ln -snf fitImage-${INITRAMFS_IMAGE_NAME}-${KERNEL_FIT_NAME}.bin ${DEPLOYDIR}/fitImage-${INITRAMFS_IMAGE_NAME}-${KERNEL_FIT_LINK_NAME}
fi
+ if [ "${UBOOT_SIGN_ENABLE}" = "1" -a -n "${UBOOT_DTB_BINARY}" ] ; then
+ # UBOOT_DTB_IMAGE is a realfile, but we can't use
+ # ${UBOOT_DTB_IMAGE} since it contains ${PV} which is aimed
+ # for u-boot, but we are in kernel env now.
+ install -m 0644 ${B}/u-boot-${MACHINE}*.dtb ${DEPLOYDIR}/
+ fi
fi
}
diff --git a/meta/classes/uboot-sign.bbclass b/meta/classes/uboot-sign.bbclass
index afaf46f..03100b8 100644
--- a/meta/classes/uboot-sign.bbclass
+++ b/meta/classes/uboot-sign.bbclass
@@ -19,11 +19,15 @@
# The tasks sequence is set as below, using DEPLOY_IMAGE_DIR as common place to
# treat the device tree blob:
#
-# u-boot:do_deploy_dtb
-# u-boot:do_deploy
-# virtual/kernel:do_assemble_fitimage
-# u-boot:do_concat_dtb
-# u-boot:do_install
+# * u-boot:do_install_append
+# Install UBOOT_DTB_BINARY to datadir, so that kernel can use it for
+# signing, and kernel will deploy UBOOT_DTB_BINARY after signs it.
+#
+# * virtual/kernel:do_assemble_fitimage
+# Sign the image
+#
+# * u-boot:do_deploy[postfuncs]
+# Deploy files like UBOOT_DTB_IMAGE, UBOOT_DTB_SYMLINK and others.
#
# For more details on signature process, please refer to U-Boot documentation.
@@ -38,58 +42,65 @@ UBOOT_NODTB_IMAGE ?= "u-boot-nodtb-${MACHINE}-${PV}-${PR}.${UBOOT_SUFFIX}"
UBOOT_NODTB_BINARY ?= "u-boot-nodtb.${UBOOT_SUFFIX}"
UBOOT_NODTB_SYMLINK ?= "u-boot-nodtb-${MACHINE}.${UBOOT_SUFFIX}"
-#
-# Following is relevant only for u-boot recipes:
-#
+# Functions in this bbclass is for u-boot only
+UBOOT_PN = "${@d.getVar('PREFERRED_PROVIDER_u-boot') or 'u-boot'}"
-do_deploy_dtb () {
- mkdir -p ${DEPLOYDIR}
- cd ${DEPLOYDIR}
+concat_dtb() {
+ if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${PN}" = "${UBOOT_PN}" ]; then
+ mkdir -p ${DEPLOYDIR}
+ if [ -e ${B}/${UBOOT_DTB_BINARY} ]; then
+ ln -sf ${UBOOT_DTB_IMAGE} ${DEPLOYDIR}/${UBOOT_DTB_BINARY}
+ ln -sf ${UBOOT_DTB_IMAGE} ${DEPLOYDIR}/${UBOOT_DTB_SYMLINK}
+ fi
- if [ -f ${B}/${UBOOT_DTB_BINARY} ]; then
- install ${B}/${UBOOT_DTB_BINARY} ${DEPLOYDIR}/${UBOOT_DTB_IMAGE}
- rm -f ${UBOOT_DTB_BINARY} ${UBOOT_DTB_SYMLINK}
- ln -sf ${UBOOT_DTB_IMAGE} ${UBOOT_DTB_SYMLINK}
- ln -sf ${UBOOT_DTB_IMAGE} ${UBOOT_DTB_BINARY}
- fi
- if [ -f ${B}/${UBOOT_NODTB_BINARY} ]; then
- install ${B}/${UBOOT_NODTB_BINARY} ${DEPLOYDIR}/${UBOOT_NODTB_IMAGE}
- rm -f ${UBOOT_NODTB_BINARY} ${UBOOT_NODTB_SYMLINK}
- ln -sf ${UBOOT_NODTB_IMAGE} ${UBOOT_NODTB_SYMLINK}
- ln -sf ${UBOOT_NODTB_IMAGE} ${UBOOT_NODTB_BINARY}
- fi
-}
+ if [ -f ${B}/${UBOOT_NODTB_BINARY} ]; then
+ install ${B}/${UBOOT_NODTB_BINARY} ${DEPLOYDIR}/${UBOOT_NODTB_IMAGE}
+ ln -sf ${UBOOT_NODTB_IMAGE} ${UBOOT_NODTB_SYMLINK}
+ ln -sf ${UBOOT_NODTB_IMAGE} ${UBOOT_NODTB_BINARY}
+ fi
-do_concat_dtb () {
- # Concatenate U-Boot w/o DTB & DTB with public key
- # (cf. kernel-fitimage.bbclass for more details)
- if [ "x${UBOOT_SIGN_ENABLE}" = "x1" ]; then
+ # Concatenate U-Boot w/o DTB & DTB with public key
+ # (cf. kernel-fitimage.bbclass for more details)
+ deployed_uboot_dtb_binary='${DEPLOY_DIR_IMAGE}/${UBOOT_DTB_IMAGE}'
if [ "x${UBOOT_SUFFIX}" = "ximg" -o "x${UBOOT_SUFFIX}" = "xrom" ] && \
- [ -e "${DEPLOYDIR}/${UBOOT_DTB_IMAGE}" ]; then
+ [ -e "$deployed_uboot_dtb_binary" ]; then
cd ${B}
- oe_runmake EXT_DTB=${DEPLOYDIR}/${UBOOT_DTB_IMAGE}
+ oe_runmake EXT_DTB=$deployed_uboot_dtb_binary
install ${B}/${UBOOT_BINARY} ${DEPLOYDIR}/${UBOOT_IMAGE}
- install ${B}/${UBOOT_BINARY} ${DEPLOY_DIR_IMAGE}/${UBOOT_IMAGE}
- elif [ -e "${DEPLOYDIR}/${UBOOT_NODTB_IMAGE}" -a -e "${DEPLOYDIR}/${UBOOT_DTB_IMAGE}" ]; then
+ elif [ -e "${DEPLOYDIR}/${UBOOT_NODTB_IMAGE}" -a -e "$deployed_uboot_dtb_binary" ]; then
cd ${DEPLOYDIR}
- cat ${UBOOT_NODTB_IMAGE} ${UBOOT_DTB_IMAGE} | tee ${B}/${UBOOT_BINARY} > ${UBOOT_IMAGE}
+ cat ${UBOOT_NODTB_IMAGE} $deployed_uboot_dtb_binary | tee ${B}/${UBOOT_BINARY} > ${UBOOT_IMAGE}
else
bbwarn "Failure while adding public key to u-boot binary. Verified boot won't be available."
fi
fi
}
+# Install UBOOT_DTB_BINARY to datadir, so that kernel can use it for
+# signing, and kernel will deploy UBOOT_DTB_BINARY after signs it.
+do_install_append() {
+ if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${PN}" = "${UBOOT_PN}" ]; then
+ if [ -f ${B}/${UBOOT_DTB_BINARY} ]; then
+ install -d ${D}${datadir}
+ # UBOOT_DTB_BINARY is a symlink to UBOOT_DTB_IMAGE, so we
+ # need both of them.
+ install ${B}/${UBOOT_DTB_BINARY} ${D}${datadir}/${UBOOT_DTB_IMAGE}
+ ln -sf ${UBOOT_DTB_IMAGE} ${D}${datadir}/${UBOOT_DTB_BINARY}
+ else
+ bbwarn "${B}/${UBOOT_DTB_BINARY} not found"
+ fi
+ fi
+}
+
python () {
- uboot_pn = d.getVar('PREFERRED_PROVIDER_u-boot') or 'u-boot'
- if d.getVar('UBOOT_SIGN_ENABLE') == '1' and d.getVar('PN') == uboot_pn:
+ if d.getVar('UBOOT_SIGN_ENABLE') == '1' and d.getVar('PN') == d.getVar('UBOOT_PN'):
kernel_pn = d.getVar('PREFERRED_PROVIDER_virtual/kernel')
- # u-boot.dtb and u-boot-nodtb.bin are deployed _before_ do_deploy
- # Thus, do_deploy_setscene will also populate them in DEPLOY_IMAGE_DIR
- bb.build.addtask('do_deploy_dtb', 'do_deploy', 'do_compile', d)
+ # Make "bitbake u-boot -cdeploy" deploys the signed u-boot.dtb
+ d.appendVarFlag('do_deploy', 'depends', ' %s:do_deploy' % kernel_pn)
- # do_concat_dtb is scheduled _before_ do_install as it overwrite the
- # u-boot.bin in both DEPLOYDIR and DEPLOY_IMAGE_DIR.
- bb.build.addtask('do_concat_dtb', 'do_install', None, d)
- d.appendVarFlag('do_concat_dtb', 'depends', ' %s:do_assemble_fitimage' % kernel_pn)
+ # kernerl's do_deploy is a litle special, so we can't use
+ # do_deploy_append, otherwise it would override
+ # kernel_do_deploy.
+ d.appendVarFlag('do_deploy', 'prefuncs', ' concat_dtb')
}
diff --git a/meta/recipes-bsp/u-boot/u-boot.inc b/meta/recipes-bsp/u-boot/u-boot.inc
index 48fbc57..bbdbc25 100644
--- a/meta/recipes-bsp/u-boot/u-boot.inc
+++ b/meta/recipes-bsp/u-boot/u-boot.inc
@@ -201,7 +201,7 @@ do_install () {
}
-FILES_${PN} = "/boot ${sysconfdir}"
+FILES_${PN} = "/boot ${sysconfdir} ${datadir}"
do_deploy () {
if [ -n "${UBOOT_CONFIG}" ]
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread