* Re: [PATCH 08/11] lrzsz: remove the recipe
2019-11-25 12:07 ` Ross Burton
@ 2019-11-26 11:59 ` Phil Blundell
2019-11-26 12:06 ` Phil Blundell
2019-11-27 14:32 ` Ross Burton
0 siblings, 2 replies; 35+ messages in thread
From: Phil Blundell @ 2019-11-26 11:59 UTC (permalink / raw)
To: Ross Burton; +Cc: OE-core, Adrian Bunk
[-- Attachment #1: Type: text/plain, Size: 364 bytes --]
On Mon, Nov 25, 2019 at 12:07:25PM +0000, Ross Burton wrote:
> If you can send a patch sooner rather than later for lrzsz to fix the build
> with modern gettext then that would be *awesome*, as this recipe is the sole
> blocker.
This works for me and should resolve your immediate issue. We can think about
a better long-term solution separately.
p.
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 0001-lrzsz-Update-autotools-infrastructure-and-make-it-wo.patch --]
[-- Type: text/x-diff; charset=utf-8, Size: 2002623 bytes --]
From 3e0ebb6f0b5bbea515fea49fdda78b2916f54a39 Mon Sep 17 00:00:00 2001
From: Phil Blundell <philb@brightsign.biz>
Date: Tue, 26 Nov 2019 11:55:59 +0000
Subject: [PATCH] lrzsz: Update autotools infrastructure and make it work with
new gettext
Run gettextize and autoreconf and fix up the resulting problem so that
it builds more-or-less cleanly and "make dist" works. Some of the
existing patches that contained particular point fixes are now rolled
into a single big patch.
Signed-off-by: Phil Blundell <pb@pbcl.net>
---
.../lrzsz/lrzsz-0.12.20/acdefine.patch | 19 -
.../lrzsz-0.12.20/autotools-update.patch | 36701 ++++++++++++++++
.../lrzsz/lrzsz-0.12.20/gettext.patch | 21884 ---------
.../lrzsz_fix_for_automake-1.12.patch | 49 -
meta/recipes-bsp/lrzsz/lrzsz_0.12.20.bb | 4 +-
5 files changed, 36702 insertions(+), 21955 deletions(-)
delete mode 100644 meta/recipes-bsp/lrzsz/lrzsz-0.12.20/acdefine.patch
create mode 100644 meta/recipes-bsp/lrzsz/lrzsz-0.12.20/autotools-update.patch
delete mode 100644 meta/recipes-bsp/lrzsz/lrzsz-0.12.20/gettext.patch
delete mode 100644 meta/recipes-bsp/lrzsz/lrzsz-0.12.20/lrzsz_fix_for_automake-1.12.patch
diff --git a/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/acdefine.patch b/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/acdefine.patch
deleted file mode 100644
index 682cf416e2..0000000000
--- a/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/acdefine.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-Add a description to the AC_DEFINE for LOCALEDIR so that it appears in config.h
-and silences a fatal warning.
-
-Upstream-Status:Pending
-Signed-off-by: Ross Burton <ross.burton@intel.com>
-
-diff --git a/configure.in b/configure.in
-index c10460c..aa20263 100644
---- a/configure.in
-+++ b/configure.in
-@@ -258,7 +258,7 @@ AC_SUBST(LIBS)
-
- AM_GNU_GETTEXT
-
--AC_DEFINE_UNQUOTED(LOCALEDIR,"$prefix/$DATADIRNAME")
-+AC_DEFINE_UNQUOTED(LOCALEDIR,"$prefix/$DATADIRNAME",[locale directory])
-
- AC_OUTPUT([Makefile intl/Makefile lib/Makefile testsuite/Makefile m4/Makefile \
- man/Makefile po/Makefile.in src/Makefile debian/rules Specfile systype \
diff --git a/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/autotools-update.patch b/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/autotools-update.patch
new file mode 100644
index 0000000000..fa78599f38
--- /dev/null
+++ b/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/autotools-update.patch
@@ -0,0 +1,36701 @@
+Update autotools infrastructure (including gettext) to modern versions.
+
+Upstream-Status: Pending
+Signed-off-by: Phil Blundell <pb@pbcl.net>
+
+diff -uprN clean/lrzsz-0.12.20/ABOUT-NLS lrzsz-0.12.20/ABOUT-NLS
+--- clean/lrzsz-0.12.20/ABOUT-NLS 1998-04-26 14:22:30.000000000 +0100
++++ lrzsz-0.12.20/ABOUT-NLS 2019-11-25 18:21:17.000000000 +0000
+@@ -1,225 +1 @@
+-Notes on the Free Translation Project
+-*************************************
+-
+- Free software is going international! The Free Translation Project
+-is a way to get maintainers of free software, translators, and users all
+-together, so that will gradually become able to speak many languages.
+-A few packages already provide translations for their messages.
+-
+- If you found this `ABOUT-NLS' file inside a distribution, you may
+-assume that the distributed package does use GNU `gettext' internally,
+-itself available at your nearest GNU archive site. But you do *not*
+-need to install GNU `gettext' prior to configuring, installing or using
+-this package with messages translated.
+-
+- Installers will find here some useful hints. These notes also
+-explain how users should proceed for getting the programs to use the
+-available translations. They tell how people wanting to contribute and
+-work at translations should contact the appropriate team.
+-
+- When reporting bugs in the `intl/' directory or bugs which may be
+-related to internationalization, you should tell about the version of
+-`gettext' which is used. The information can be found in the
+-`intl/VERSION' file, in internationalized packages.
+-
+-One advise in advance
+-=====================
+-
+- If you want to exploit the full power of internationalization, you
+-should configure it using
+-
+- ./configure --with-included-gettext
+-
+-to force usage of internationalizing routines provided within this
+-package, despite the existence of internationalizing capabilities in the
+-operating system where this package is being installed. So far, only
+-the `gettext' implementation in the GNU C library version 2 provides as
+-many features (such as locale alias or message inheritance) as the
+-implementation here. It is also not possible to offer this additional
+-functionality on top of a `catgets' implementation. Future versions of
+-GNU `gettext' will very likely convey even more functionality. So it
+-might be a good idea to change to GNU `gettext' as soon as possible.
+-
+- So you need not provide this option if you are using GNU libc 2 or
+-you have installed a recent copy of the GNU gettext package with the
+-included `libintl'.
+-
+-INSTALL Matters
+-===============
+-
+- Some packages are "localizable" when properly installed; the
+-programs they contain can be made to speak your own native language.
+-Most such packages use GNU `gettext'. Other packages have their own
+-ways to internationalization, predating GNU `gettext'.
+-
+- By default, this package will be installed to allow translation of
+-messages. It will automatically detect whether the system provides
+-usable `catgets' (if using this is selected by the installer) or
+-`gettext' functions. If neither is available, the GNU `gettext' own
+-library will be used. This library is wholly contained within this
+-package, usually in the `intl/' subdirectory, so prior installation of
+-the GNU `gettext' package is *not* required. Installers may use
+-special options at configuration time for changing the default
+-behaviour. The commands:
+-
+- ./configure --with-included-gettext
+- ./configure --with-catgets
+- ./configure --disable-nls
+-
+-will respectively bypass any pre-existing `catgets' or `gettext' to use
+-the internationalizing routines provided within this package, enable
+-the use of the `catgets' functions (if found on the locale system), or
+-else, *totally* disable translation of messages.
+-
+- When you already have GNU `gettext' installed on your system and run
+-configure without an option for your new package, `configure' will
+-probably detect the previously built and installed `libintl.a' file and
+-will decide to use this. This might be not what is desirable. You
+-should use the more recent version of the GNU `gettext' library. I.e.
+-if the file `intl/VERSION' shows that the library which comes with this
+-package is more recent, you should use
+-
+- ./configure --with-included-gettext
+-
+-to prevent auto-detection.
+-
+- By default the configuration process will not test for the `catgets'
+-function and therefore they will not be used. The reasons are already
+-given above: the emulation on top of `catgets' cannot provide all the
+-extensions provided by the GNU `gettext' library. If you nevertheless
+-want to use the `catgets' functions use
+-
+- ./configure --with-catgets
+-
+-to enable the test for `catgets' (this causes no harm if `catgets' is
+-not available on your system). If you really select this option we
+-would like to hear about the reasons because we cannot think of any
+-good one ourself.
+-
+- Internationalized packages have usually many `po/LL.po' files, where
+-LL gives an ISO 639 two-letter code identifying the language. Unless
+-translations have been forbidden at `configure' time by using the
+-`--disable-nls' switch, all available translations are installed
+-together with the package. However, the environment variable `LINGUAS'
+-may be set, prior to configuration, to limit the installed set.
+-`LINGUAS' should then contain a space separated list of two-letter
+-codes, stating which languages are allowed.
+-
+-Using This Package
+-==================
+-
+- As a user, if your language has been installed for this package, you
+-only have to set the `LANG' environment variable to the appropriate
+-ISO 639 `LL' two-letter code prior to using the programs in the
+-package. For example, let's suppose that you speak German. At the
+-shell prompt, merely execute `setenv LANG de' (in `csh'),
+-`export LANG; LANG=de' (in `sh') or `export LANG=de' (in `bash'). This
+-can be done from your `.login' or `.profile' file, once and for all.
+-
+- An operating system might already offer message localization for
+-many of its programs, while other programs have been installed locally
+-with the full capabilities of GNU `gettext'. Just using `gettext'
+-extended syntax for `LANG' would break proper localization of already
+-available operating system programs. In this case, users should set
+-both `LANGUAGE' and `LANG' variables in their environment, as programs
+-using GNU `gettext' give preference to `LANGUAGE'. For example, some
+-Swedish users would rather read translations in German than English for
+-when Swedish is not available. This is easily accomplished by setting
+-`LANGUAGE' to `sv:de' while leaving `LANG' to `sv'.
+-
+-Translating Teams
+-=================
+-
+- For the Free Translation Project to be a success, we need interested
+-people who like their own language and write it well, and who are also
+-able to synergize with other translators speaking the same language.
+-Each translation team has its own mailing list, courtesy of Linux
+-International. You may reach your translation team at the address
+-`LL@li.org', replacing LL by the two-letter ISO 639 code for your
+-language. Language codes are *not* the same as the country codes given
+-in ISO 3166. The following translation teams exist, as of August 1997:
+-
+- Chinese `zh', Czech `cs', Danish `da', Dutch `nl', English `en',
+- Esperanto `eo', Finnish `fi', French `fr', German `de', Hungarian
+- `hu', Irish `ga', Italian `it', Indonesian `id', Japanese `ja',
+- Korean `ko', Latin `la', Norwegian `no', Persian `fa', Polish
+- `pl', Portuguese `pt', Russian `ru', Slovenian `sl', Spanish `es',
+- Swedish `sv', and Turkish `tr'.
+-
+-For example, you may reach the Chinese translation team by writing to
+-`zh@li.org'.
+-
+- If you'd like to volunteer to *work* at translating messages, you
+-should become a member of the translating team for your own language.
+-The subscribing address is *not* the same as the list itself, it has
+-`-request' appended. For example, speakers of Swedish can send a
+-message to `sv-request@li.org', having this message body:
+-
+- subscribe
+-
+- Keep in mind that team members are expected to participate
+-*actively* in translations, or at solving translational difficulties,
+-rather than merely lurking around. If your team does not exist yet and
+-you want to start one, or if you are unsure about what to do or how to
+-get started, please write to `translation@iro.umontreal.ca' to reach the
+-coordinator for all translator teams.
+-
+- The English team is special. It works at improving and uniformizing
+-the terminology in use. Proven linguistic skill are praised more than
+-programming skill, here.
+-
+-Available Packages
+-==================
+-
+- Languages are not equally supported in all packages. The following
+-matrix shows the current state of internationalization, as of August
+-1997. The matrix shows, in regard of each package, for which languages
+-PO files have been submitted to translation coordination.
+-
+- Ready PO files cs da de en es fi fr it ja ko nl no pl pt sl sv
+- .-------------------------------------------------.
+- bash | [] [] [] | 3
+- bison | [] [] [] | 3
+- clisp | [] [] [] [] | 4
+- cpio | [] [] [] [] [] | 5
+- diffutils | [] [] [] [] [] | 5
+- enscript | [] [] [] [] [] [] | 6
+- fileutils | [] [] [] [] [] [] [] [] [] [] | 10
+- findutils | [] [] [] [] [] [] [] [] | 8
+- flex | [] [] [] [] | 4
+- gcal | [] [] [] [] [] | 5
+- gettext | [] [] [] [] [] [] [] [] [] [] | 11
+- grep | [] [] [] [] [] [] [] [] [] | 9
+- hello | [] [] [] [] [] [] [] [] [] [] | 10
+- id-utils | [] [] [] | 3
+- indent | [] [] [] [] | 4
+- libc | [] [] [] [] [] [] [] | 7
+- m4 | [] [] [] [] [] | 5
+- make | [] [] [] [] [] [] | 6
+- music | [] [] | 2
+- ptx | [] [] [] [] [] [] [] [] | 8
+- recode | [] [] [] [] [] [] [] [] [] | 9
+- sh-utils | [] [] [] [] [] [] [] | 7
+- sharutils | [] [] [] [] [] | 5
+- tar | [] [] [] [] [] [] [] [] [] [] | 10
+- texinfo | [] | 1
+- textutils | [] [] [] [] [] [] [] [] [] | 9
+- wdiff | [] [] [] [] [] [] [] [] | 8
+- `-------------------------------------------------'
+- 16 languages cs da de en es fi fr it ja ko nl no pl pt sl sv
+- 27 packages 3 2 24 1 17 1 26 2 1 11 20 9 19 7 7 17 167
+-
+- Some counters in the preceding matrix are higher than the number of
+-visible blocks let us expect. This is because a few extra PO files are
+-used for implementing regional variants of languages, or language
+-dialects.
+-
+- For a PO file in the matrix above to be effective, the package to
+-which it applies should also have been internationalized and
+-distributed as such by its maintainer. There might be an observable
+-lag between the mere existence a PO file and its wide availability in a
+-distribution.
+-
+- If August 1997 seems to be old, you may fetch a more recent copy of
+-this `ABOUT-NLS' file on most GNU archive sites.
+-
++<https://www.gnu.org/software/gettext/manual/html_node/Users.html>
+diff -uprN clean/lrzsz-0.12.20/aclocal.m4 lrzsz-0.12.20/aclocal.m4
+--- clean/lrzsz-0.12.20/aclocal.m4 1998-12-30 07:50:12.000000000 +0000
++++ lrzsz-0.12.20/aclocal.m4 2019-11-26 11:37:44.000000000 +0000
+@@ -1,699 +1,1120 @@
+-dnl aclocal.m4 generated automatically by aclocal 1.3
++# generated automatically by aclocal 1.16.1 -*- Autoconf -*-
+
+-dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+-dnl This Makefile.in is free software; the Free Software Foundation
+-dnl gives unlimited permission to copy and/or distribute it,
+-dnl with or without modifications, as long as this notice is preserved.
+-
+-dnl This program is distributed in the hope that it will be useful,
+-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+-dnl PARTICULAR PURPOSE.
+-
+-dnl AC_REPLACE_GNU_GETOPT
+-AC_DEFUN(AC_REPLACE_GNU_GETOPT,
+-[AC_CHECK_FUNC(getopt_long, , [LIBOBJS="$LIBOBJS getopt1.o getopt.o"])
+-AC_SUBST(LIBOBJS)dnl
+-])
++# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+
+-dnl
+-dnl taken from taylor uucp
+-AC_DEFUN(LRZSZ_ERRNO_DECL,[
+-AC_MSG_CHECKING(for errno declaration)
+-AC_CACHE_VAL(lrzsz_cv_decl_errno,
+-[AC_TRY_COMPILE([#include <errno.h>], [int i = errno; errno = 1;],
+-lrzsz_cv_decl_errno=yes, lrzsz_cv_decl_errno=no)])
+-AC_MSG_RESULT($lrzsz_cv_decl_errno)
+-if test $lrzsz_cv_decl_errno = yes; then
+- AC_DEFINE([HAVE_ERRNO_DECLARATION])
+-fi
+-])
+-
+-dnl for ease of use
+-AC_DEFUN([LRZSZ_HEADERS_TERM_IO],[
+-AC_CHECK_HEADERS(termios.h sys/termios.h termio.h sys/termio.h sgtty.h)dnl
+-])
+-
+-dnl LRZSZ_TYPE_SPEED_T
+-AC_DEFUN(LRZSZ_TYPE_SPEED_T,[
+-AC_REQUIRE([AC_HEADER_STDC])dnl
+-AC_REQUIRE([LRZSZ_HEADERS_TERM_IO])dnl
+-AC_MSG_CHECKING(for speed_t)
+-AC_CACHE_VAL(ac_cv_type_speed_t,
+-[AC_EGREP_CPP(speed_t, [#include <sys/types.h>
+-#if STDC_HEADERS
+-#include <stdlib.h>
+-#include <stddef.h>
+-#endif
+-#ifdef HAVE_TERMIOS_H
+-#include <termios.h>
+-#else
+-#if defined(HAVE_SYS_TERMIOS_H)
+-#include <sys/termios.h>
+-#else
+-#if defined(HAVE_TERMIO_H)
+-#include <termio.h>
+-#else
+-#if defined(HAVE_SYS_TERMIO_H)
+-#include <sys/termio.h>
+-#else
+-#if defined(HAVE_SGTTY_H)
+-#include <sgtty.h>
+-#else
+-#error neither termio.h nor sgtty.h found. Cannot continue. */
+-#endif
+-#endif
+-#endif
+-#endif
+-#endif
+-], ac_cv_type_speed_t=yes, ac_cv_type_speed_t=no)])dnl
+-AC_MSG_RESULT($ac_cv_type_speed_t)
+-if test $ac_cv_type_speed_t = no; then
+- AC_DEFINE([speed_t],long)
+-fi
+-])
+-
+-AC_DEFUN(lrzsz_HEADER_SYS_SELECT,
+-[AC_CACHE_CHECK([whether sys/time.h and sys/select.h may both be included],
+- lrzsz_cv_header_sys_select,
+-[AC_TRY_COMPILE([#include <sys/types.h>
+-#include <sys/time.h>
+-#include <sys/select.h>],
+-[struct tm *tp;], lrzsz_cv_header_sys_select=yes, lrzsz_cv_header_sys_select=no)])
+-if test $lrzsz_cv_header_sys_select = no; then
+- AC_DEFINE(SYS_TIME_WITHOUT_SYS_SELECT)
+-fi
+-])
+-
+-
+-# Do all the work for Automake. This macro actually does too much --
+-# some checks are only needed if your package does certain things.
+-# But this isn't really a big deal.
+-
+-# serial 1
+-
+-dnl Usage:
+-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+-
+-AC_DEFUN(AM_INIT_AUTOMAKE,
+-[AC_REQUIRE([AM_PROG_INSTALL])
+-PACKAGE=[$1]
+-AC_SUBST(PACKAGE)
+-VERSION=[$2]
+-AC_SUBST(VERSION)
+-dnl test to see if srcdir already configured
+-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+-fi
+-ifelse([$3],,
+-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
+-AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
+-AC_REQUIRE([AM_SANITY_CHECK])
+-AC_REQUIRE([AC_ARG_PROGRAM])
+-dnl FIXME This is truly gross.
+-missing_dir=`cd $ac_aux_dir && pwd`
+-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
+-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
+-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+-AC_REQUIRE([AC_PROG_MAKE_SET])])
+-
+-
+-# serial 1
+-
+-AC_DEFUN(AM_PROG_INSTALL,
+-[AC_REQUIRE([AC_PROG_INSTALL])
+-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+-AC_SUBST(INSTALL_SCRIPT)dnl
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
++# PARTICULAR PURPOSE.
++
++m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
++m4_ifndef([AC_AUTOCONF_VERSION],
++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
++m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
++[m4_warning([this file was generated for autoconf 2.69.
++You have another version of autoconf. It may work, but is not guaranteed to.
++If you have problems, you may need to regenerate the build system entirely.
++To do so, use the procedure documented by the package, typically 'autoreconf'.])])
++
++# Copyright (C) 2002-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_AUTOMAKE_VERSION(VERSION)
++# ----------------------------
++# Automake X.Y traces this macro to ensure aclocal.m4 has been
++# generated from the m4 files accompanying Automake X.Y.
++# (This private macro should not be called outside this file.)
++AC_DEFUN([AM_AUTOMAKE_VERSION],
++[am__api_version='1.16'
++dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
++dnl require some minimum version. Point them to the right macro.
++m4_if([$1], [1.16.1], [],
++ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+ ])
+
++# _AM_AUTOCONF_VERSION(VERSION)
++# -----------------------------
++# aclocal traces this macro to find the Autoconf version.
++# This is a private macro too. Using m4_define simplifies
++# the logic in aclocal, which can simply ignore this definition.
++m4_define([_AM_AUTOCONF_VERSION], [])
++
++# AM_SET_CURRENT_AUTOMAKE_VERSION
++# -------------------------------
++# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
++# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
++[AM_AUTOMAKE_VERSION([1.16.1])dnl
++m4_ifndef([AC_AUTOCONF_VERSION],
++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
++_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
++
++# AM_AUX_DIR_EXPAND -*- Autoconf -*-
++
++# Copyright (C) 2001-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
++# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
++# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
++#
++# Of course, Automake must honor this variable whenever it calls a
++# tool from the auxiliary directory. The problem is that $srcdir (and
++# therefore $ac_aux_dir as well) can be either absolute or relative,
++# depending on how configure is run. This is pretty annoying, since
++# it makes $ac_aux_dir quite unusable in subdirectories: in the top
++# source directory, any form will work fine, but in subdirectories a
++# relative path needs to be adjusted first.
+ #
+-# Check to make sure that the build environment is sane.
++# $ac_aux_dir/missing
++# fails when called from a subdirectory if $ac_aux_dir is relative
++# $top_srcdir/$ac_aux_dir/missing
++# fails if $ac_aux_dir is absolute,
++# fails when called from a subdirectory in a VPATH build with
++# a relative $ac_aux_dir
+ #
++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
++# are both prefixed by $srcdir. In an in-source build this is usually
++# harmless because $srcdir is '.', but things will broke when you
++# start a VPATH build or use an absolute $srcdir.
++#
++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
++# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
++# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
++# and then we would define $MISSING as
++# MISSING="\${SHELL} $am_aux_dir/missing"
++# This will work as long as MISSING is not called from configure, because
++# unfortunately $(top_srcdir) has no meaning in configure.
++# However there are other variables, like CC, which are often used in
++# configure, and could therefore not use this "fixed" $ac_aux_dir.
++#
++# Another solution, used here, is to always expand $ac_aux_dir to an
++# absolute PATH. The drawback is that using absolute paths prevent a
++# configured tree to be moved without reconfiguration.
++
++AC_DEFUN([AM_AUX_DIR_EXPAND],
++[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
++# Expand $ac_aux_dir to an absolute path.
++am_aux_dir=`cd "$ac_aux_dir" && pwd`
++])
+
+-AC_DEFUN(AM_SANITY_CHECK,
+-[AC_MSG_CHECKING([whether build environment is sane])
+-# Just in case
+-sleep 1
+-echo timestamp > conftestfile
+-# Do `set' in a subshell so we don't clobber the current shell's
+-# arguments. Must try -L first in case configure is actually a
+-# symlink; some systems play weird games with the mod time of symlinks
+-# (eg FreeBSD returns the mod time of the symlink's containing
+-# directory).
+-if (
+- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+- if test "[$]*" = "X"; then
+- # -L didn't work.
+- set X `ls -t $srcdir/configure conftestfile`
+- fi
+- if test "[$]*" != "X $srcdir/configure conftestfile" \
+- && test "[$]*" != "X conftestfile $srcdir/configure"; then
+-
+- # If neither matched, then we have a broken ls. This can happen
+- # if, for instance, CONFIG_SHELL is bash and it inherits a
+- # broken ls alias from the environment. This has actually
+- # happened. Such a system could not be considered "sane".
+- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+-alias in your environment])
+- fi
+-
+- test "[$]2" = conftestfile
+- )
+-then
+- # Ok.
+- :
++# AM_CONDITIONAL -*- Autoconf -*-
++
++# Copyright (C) 1997-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_CONDITIONAL(NAME, SHELL-CONDITION)
++# -------------------------------------
++# Define a conditional.
++AC_DEFUN([AM_CONDITIONAL],
++[AC_PREREQ([2.52])dnl
++ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
++AC_SUBST([$1_TRUE])dnl
++AC_SUBST([$1_FALSE])dnl
++_AM_SUBST_NOTMAKE([$1_TRUE])dnl
++_AM_SUBST_NOTMAKE([$1_FALSE])dnl
++m4_define([_AM_COND_VALUE_$1], [$2])dnl
++if $2; then
++ $1_TRUE=
++ $1_FALSE='#'
+ else
+- AC_MSG_ERROR([newly created file is older than distributed files!
+-Check your system clock])
++ $1_TRUE='#'
++ $1_FALSE=
+ fi
+-rm -f conftest*
+-AC_MSG_RESULT(yes)])
++AC_CONFIG_COMMANDS_PRE(
++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
++ AC_MSG_ERROR([[conditional "$1" was never defined.
++Usually this means the macro was only invoked conditionally.]])
++fi])])
+
+-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+-dnl The program must properly implement --version.
+-AC_DEFUN(AM_MISSING_PROG,
+-[AC_MSG_CHECKING(for working $2)
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if ($2 --version) < /dev/null > /dev/null 2>&1; then
+- $1=$2
+- AC_MSG_RESULT(found)
++# Copyright (C) 1999-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++
++# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
++# written in clear, in which case automake, when reading aclocal.m4,
++# will think it sees a *use*, and therefore will trigger all it's
++# C support machinery. Also note that it means that autoscan, seeing
++# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
++
++
++# _AM_DEPENDENCIES(NAME)
++# ----------------------
++# See how the compiler implements dependency checking.
++# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
++# We try a few techniques and use that to set a single cache variable.
++#
++# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
++# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
++# dependency, and given that the user is not expected to run this macro,
++# just rely on AC_PROG_CC.
++AC_DEFUN([_AM_DEPENDENCIES],
++[AC_REQUIRE([AM_SET_DEPDIR])dnl
++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
++AC_REQUIRE([AM_MAKE_INCLUDE])dnl
++AC_REQUIRE([AM_DEP_TRACK])dnl
++
++m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
++ [$1], [CXX], [depcc="$CXX" am_compiler_list=],
++ [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
++ [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
++ [$1], [UPC], [depcc="$UPC" am_compiler_list=],
++ [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
++ [depcc="$$1" am_compiler_list=])
++
++AC_CACHE_CHECK([dependency style of $depcc],
++ [am_cv_$1_dependencies_compiler_type],
++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++ # We make a subdir and do the tests there. Otherwise we can end up
++ # making bogus files that we don't know about and never remove. For
++ # instance it was reported that on HP-UX the gcc test will end up
++ # making a dummy file named 'D' -- because '-MD' means "put the output
++ # in D".
++ rm -rf conftest.dir
++ mkdir conftest.dir
++ # Copy depcomp to subdir because otherwise we won't find it if we're
++ # using a relative directory.
++ cp "$am_depcomp" conftest.dir
++ cd conftest.dir
++ # We will build objects and dependencies in a subdirectory because
++ # it helps to detect inapplicable dependency modes. For instance
++ # both Tru64's cc and ICC support -MD to output dependencies as a
++ # side effect of compilation, but ICC will put the dependencies in
++ # the current directory while Tru64 will put them in the object
++ # directory.
++ mkdir sub
++
++ am_cv_$1_dependencies_compiler_type=none
++ if test "$am_compiler_list" = ""; then
++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
++ fi
++ am__universal=false
++ m4_case([$1], [CC],
++ [case " $depcc " in #(
++ *\ -arch\ *\ -arch\ *) am__universal=true ;;
++ esac],
++ [CXX],
++ [case " $depcc " in #(
++ *\ -arch\ *\ -arch\ *) am__universal=true ;;
++ esac])
++
++ for depmode in $am_compiler_list; do
++ # Setup a source with many dependencies, because some compilers
++ # like to wrap large dependency lists on column 80 (with \), and
++ # we should not choose a depcomp mode which is confused by this.
++ #
++ # We need to recreate these files for each test, as the compiler may
++ # overwrite some of them when testing with obscure command lines.
++ # This happens at least with the AIX C compiler.
++ : > sub/conftest.c
++ for i in 1 2 3 4 5 6; do
++ echo '#include "conftst'$i'.h"' >> sub/conftest.c
++ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
++ # Solaris 10 /bin/sh.
++ echo '/* dummy */' > sub/conftst$i.h
++ done
++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
++
++ # We check with '-c' and '-o' for the sake of the "dashmstdout"
++ # mode. It turns out that the SunPro C++ compiler does not properly
++ # handle '-M -o', and we need to detect this. Also, some Intel
++ # versions had trouble with output in subdirs.
++ am__obj=sub/conftest.${OBJEXT-o}
++ am__minus_obj="-o $am__obj"
++ case $depmode in
++ gcc)
++ # This depmode causes a compiler race in universal mode.
++ test "$am__universal" = false || continue
++ ;;
++ nosideeffect)
++ # After this tag, mechanisms are not by side-effect, so they'll
++ # only be used when explicitly requested.
++ if test "x$enable_dependency_tracking" = xyes; then
++ continue
++ else
++ break
++ fi
++ ;;
++ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
++ # This compiler won't grok '-c -o', but also, the minuso test has
++ # not run yet. These depmodes are late enough in the game, and
++ # so weak that their functioning should not be impacted.
++ am__obj=conftest.${OBJEXT-o}
++ am__minus_obj=
++ ;;
++ none) break ;;
++ esac
++ if depmode=$depmode \
++ source=sub/conftest.c object=$am__obj \
++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
++ >/dev/null 2>conftest.err &&
++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++ # icc doesn't choke on unknown options, it will just issue warnings
++ # or remarks (even with -Werror). So we grep stderr for any message
++ # that says an option was ignored or not supported.
++ # When given -MP, icc 7.0 and 7.1 complain thusly:
++ # icc: Command line warning: ignoring option '-M'; no argument required
++ # The diagnosis changed in icc 8.0:
++ # icc: Command line remark: option '-MP' not supported
++ if (grep 'ignoring option' conftest.err ||
++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++ am_cv_$1_dependencies_compiler_type=$depmode
++ break
++ fi
++ fi
++ done
++
++ cd ..
++ rm -rf conftest.dir
+ else
+- $1="$3/missing $2"
+- AC_MSG_RESULT(missing)
++ am_cv_$1_dependencies_compiler_type=none
+ fi
+-AC_SUBST($1)])
++])
++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
++AM_CONDITIONAL([am__fastdep$1], [
++ test "x$enable_dependency_tracking" != xno \
++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
++])
++
+
+-# Like AC_CONFIG_HEADER, but automatically create stamp file.
++# AM_SET_DEPDIR
++# -------------
++# Choose a directory name for dependency files.
++# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
++AC_DEFUN([AM_SET_DEPDIR],
++[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
++])
+
+-AC_DEFUN(AM_CONFIG_HEADER,
+-[AC_PREREQ([2.12])
+-AC_CONFIG_HEADER([$1])
+-dnl When config.status generates a header, we must update the stamp-h file.
+-dnl This file resides in the same directory as the config header
+-dnl that is generated. We must strip everything past the first ":",
+-dnl and everything past the last "/".
+-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
+-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
+-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
+-<<am_indx=1
+-for am_file in <<$1>>; do
+- case " <<$>>CONFIG_HEADERS " in
+- *" <<$>>am_file "*<<)>>
+- echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
+- ;;
++
++# AM_DEP_TRACK
++# ------------
++AC_DEFUN([AM_DEP_TRACK],
++[AC_ARG_ENABLE([dependency-tracking], [dnl
++AS_HELP_STRING(
++ [--enable-dependency-tracking],
++ [do not reject slow dependency extractors])
++AS_HELP_STRING(
++ [--disable-dependency-tracking],
++ [speeds up one-time build])])
++if test "x$enable_dependency_tracking" != xno; then
++ am_depcomp="$ac_aux_dir/depcomp"
++ AMDEPBACKSLASH='\'
++ am__nodep='_no'
++fi
++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
++AC_SUBST([AMDEPBACKSLASH])dnl
++_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
++AC_SUBST([am__nodep])dnl
++_AM_SUBST_NOTMAKE([am__nodep])dnl
++])
++
++# Generate code to set up dependency tracking. -*- Autoconf -*-
++
++# Copyright (C) 1999-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# _AM_OUTPUT_DEPENDENCY_COMMANDS
++# ------------------------------
++AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
++[{
++ # Older Autoconf quotes --file arguments for eval, but not when files
++ # are listed without --file. Let's play safe and only enable the eval
++ # if we detect the quoting.
++ # TODO: see whether this extra hack can be removed once we start
++ # requiring Autoconf 2.70 or later.
++ AS_CASE([$CONFIG_FILES],
++ [*\'*], [eval set x "$CONFIG_FILES"],
++ [*], [set x $CONFIG_FILES])
++ shift
++ # Used to flag and report bootstrapping failures.
++ am_rc=0
++ for am_mf
++ do
++ # Strip MF so we end up with the name of the file.
++ am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
++ # Check whether this is an Automake generated Makefile which includes
++ # dependency-tracking related rules and includes.
++ # Grep'ing the whole file directly is not great: AIX grep has a line
++ # limit of 2048, but all sed's we know have understand at least 4000.
++ sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
++ || continue
++ am_dirpart=`AS_DIRNAME(["$am_mf"])`
++ am_filepart=`AS_BASENAME(["$am_mf"])`
++ AM_RUN_LOG([cd "$am_dirpart" \
++ && sed -e '/# am--include-marker/d' "$am_filepart" \
++ | $MAKE -f - am--depfiles]) || am_rc=$?
++ done
++ if test $am_rc -ne 0; then
++ AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments
++ for automatic dependency tracking. Try re-running configure with the
++ '--disable-dependency-tracking' option to at least be able to build
++ the package (albeit without support for automatic dependency tracking).])
++ fi
++ AS_UNSET([am_dirpart])
++ AS_UNSET([am_filepart])
++ AS_UNSET([am_mf])
++ AS_UNSET([am_rc])
++ rm -f conftest-deps.mk
++}
++])# _AM_OUTPUT_DEPENDENCY_COMMANDS
++
++
++# AM_OUTPUT_DEPENDENCY_COMMANDS
++# -----------------------------
++# This macro should only be invoked once -- use via AC_REQUIRE.
++#
++# This code is only required when automatic dependency tracking is enabled.
++# This creates each '.Po' and '.Plo' makefile fragment that we'll need in
++# order to bootstrap the dependency handling code.
++AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
++[AC_CONFIG_COMMANDS([depfiles],
++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
++ [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])])
++
++# Do all the work for Automake. -*- Autoconf -*-
++
++# Copyright (C) 1996-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# This macro actually does too much. Some checks are only needed if
++# your package does certain things. But this isn't really a big deal.
++
++dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
++m4_define([AC_PROG_CC],
++m4_defn([AC_PROG_CC])
++[_AM_PROG_CC_C_O
++])
++
++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
++# AM_INIT_AUTOMAKE([OPTIONS])
++# -----------------------------------------------
++# The call with PACKAGE and VERSION arguments is the old style
++# call (pre autoconf-2.50), which is being phased out. PACKAGE
++# and VERSION should now be passed to AC_INIT and removed from
++# the call to AM_INIT_AUTOMAKE.
++# We support both call styles for the transition. After
++# the next Automake release, Autoconf can make the AC_INIT
++# arguments mandatory, and then we can depend on a new Autoconf
++# release and drop the old call support.
++AC_DEFUN([AM_INIT_AUTOMAKE],
++[AC_PREREQ([2.65])dnl
++dnl Autoconf wants to disallow AM_ names. We explicitly allow
++dnl the ones we care about.
++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
++AC_REQUIRE([AC_PROG_INSTALL])dnl
++if test "`cd $srcdir && pwd`" != "`pwd`"; then
++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
++ # is not polluted with repeated "-I."
++ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
++ # test to see if srcdir already configured
++ if test -f $srcdir/config.status; then
++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
++ fi
++fi
++
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++ if (cygpath --version) >/dev/null 2>/dev/null; then
++ CYGPATH_W='cygpath -w'
++ else
++ CYGPATH_W=echo
++ fi
++fi
++AC_SUBST([CYGPATH_W])
++
++# Define the identity of the package.
++dnl Distinguish between old-style and new-style calls.
++m4_ifval([$2],
++[AC_DIAGNOSE([obsolete],
++ [$0: two- and three-arguments forms are deprecated.])
++m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
++ AC_SUBST([PACKAGE], [$1])dnl
++ AC_SUBST([VERSION], [$2])],
++[_AM_SET_OPTIONS([$1])dnl
++dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
++m4_if(
++ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
++ [ok:ok],,
++ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
++
++_AM_IF_OPTION([no-define],,
++[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
++ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
++
++# Some tools Automake needs.
++AC_REQUIRE([AM_SANITY_CHECK])dnl
++AC_REQUIRE([AC_ARG_PROGRAM])dnl
++AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
++AM_MISSING_PROG([AUTOCONF], [autoconf])
++AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
++AM_MISSING_PROG([AUTOHEADER], [autoheader])
++AM_MISSING_PROG([MAKEINFO], [makeinfo])
++AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
++AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
++AC_REQUIRE([AC_PROG_MKDIR_P])dnl
++# For better backward compatibility. To be removed once Automake 1.9.x
++# dies out for good. For more background, see:
++# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
++# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
++AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
++# We need awk for the "check" target (and possibly the TAP driver). The
++# system "awk" is bad on some platforms.
++AC_REQUIRE([AC_PROG_AWK])dnl
++AC_REQUIRE([AC_PROG_MAKE_SET])dnl
++AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
++ [_AM_PROG_TAR([v7])])])
++_AM_IF_OPTION([no-dependencies],,
++[AC_PROVIDE_IFELSE([AC_PROG_CC],
++ [_AM_DEPENDENCIES([CC])],
++ [m4_define([AC_PROG_CC],
++ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_CXX],
++ [_AM_DEPENDENCIES([CXX])],
++ [m4_define([AC_PROG_CXX],
++ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_OBJC],
++ [_AM_DEPENDENCIES([OBJC])],
++ [m4_define([AC_PROG_OBJC],
++ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
++ [_AM_DEPENDENCIES([OBJCXX])],
++ [m4_define([AC_PROG_OBJCXX],
++ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
++])
++AC_REQUIRE([AM_SILENT_RULES])dnl
++dnl The testsuite driver may need to know about EXEEXT, so add the
++dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
++dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
++AC_CONFIG_COMMANDS_PRE(dnl
++[m4_provide_if([_AM_COMPILER_EXEEXT],
++ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
++
++# POSIX will say in a future version that running "rm -f" with no argument
++# is OK; and we want to be able to make that assumption in our Makefile
++# recipes. So use an aggressive probe to check that the usage we want is
++# actually supported "in the wild" to an acceptable degree.
++# See automake bug#10828.
++# To make any issue more visible, cause the running configure to be aborted
++# by default if the 'rm' program in use doesn't match our expectations; the
++# user can still override this though.
++if rm -f && rm -fr && rm -rf; then : OK; else
++ cat >&2 <<'END'
++Oops!
++
++Your 'rm' program seems unable to run without file operands specified
++on the command line, even when the '-f' option is present. This is contrary
++to the behaviour of most rm programs out there, and not conforming with
++the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
++
++Please tell bug-automake@gnu.org about your system, including the value
++of your $PATH and any error possibly output before this message. This
++can help us improve future automake versions.
++
++END
++ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
++ echo 'Configuration will proceed anyway, since you have set the' >&2
++ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
++ echo >&2
++ else
++ cat >&2 <<'END'
++Aborting the configuration process, to ensure you take notice of the issue.
++
++You can download and install GNU coreutils to get an 'rm' implementation
++that behaves properly: <https://www.gnu.org/software/coreutils/>.
++
++If you want to complete the configuration process using your problematic
++'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
++to "yes", and re-run configure.
++
++END
++ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
++ fi
++fi
++dnl The trailing newline in this macro's definition is deliberate, for
++dnl backward compatibility and to allow trailing 'dnl'-style comments
++dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
++])
++
++dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
++dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
++dnl mangled by Autoconf and run in a shell conditional statement.
++m4_define([_AC_COMPILER_EXEEXT],
++m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
++
++# When config.status generates a header, we must update the stamp-h file.
++# This file resides in the same directory as the config header
++# that is generated. The stamp files are numbered to have different names.
++
++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
++# loop where config.status creates the headers, so we can generate
++# our stamp files there.
++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
++[# Compute $1's index in $config_headers.
++_am_arg=$1
++_am_stamp_count=1
++for _am_header in $config_headers :; do
++ case $_am_header in
++ $_am_arg | $_am_arg:* )
++ break ;;
++ * )
++ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+- am_indx=`expr "<<$>>am_indx" + 1`
+-done<<>>dnl>>)
+-changequote([,]))])
++done
++echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
++# Copyright (C) 2001-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_PROG_INSTALL_SH
++# ------------------
++# Define $install_sh.
++AC_DEFUN([AM_PROG_INSTALL_SH],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++if test x"${install_sh+set}" != xset; then
++ case $am_aux_dir in
++ *\ * | *\ *)
++ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
++ *)
++ install_sh="\${SHELL} $am_aux_dir/install-sh"
++ esac
++fi
++AC_SUBST([install_sh])])
+
+-# serial 1
+-
+-AC_DEFUN(AM_C_PROTOTYPES,
+-[AC_REQUIRE([AM_PROG_CC_STDC])
+-AC_REQUIRE([AC_PROG_CPP])
+-AC_MSG_CHECKING([for function prototypes])
+-if test "$am_cv_prog_cc_stdc" != no; then
+- AC_MSG_RESULT(yes)
+- AC_DEFINE(PROTOTYPES)
+- U= ANSI2KNR=
++# Copyright (C) 2003-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# Check whether the underlying file-system supports filenames
++# with a leading dot. For instance MS-DOS doesn't.
++AC_DEFUN([AM_SET_LEADING_DOT],
++[rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++ am__leading_dot=.
+ else
+- AC_MSG_RESULT(no)
+- U=_ ANSI2KNR=./ansi2knr
+- # Ensure some checks needed by ansi2knr itself.
+- AC_HEADER_STDC
+- AC_CHECK_HEADERS(string.h)
+-fi
+-AC_SUBST(U)dnl
+-AC_SUBST(ANSI2KNR)dnl
+-])
+-
+-
+-# serial 1
+-
+-# @defmac AC_PROG_CC_STDC
+-# @maindex PROG_CC_STDC
+-# @ovindex CC
+-# If the C compiler in not in ANSI C mode by default, try to add an option
+-# to output variable @code{CC} to make it so. This macro tries various
+-# options that select ANSI C on some system or another. It considers the
+-# compiler to be in ANSI C mode if it handles function prototypes correctly.
+-#
+-# If you use this macro, you should check after calling it whether the C
+-# compiler has been set to accept ANSI C; if not, the shell variable
+-# @code{am_cv_prog_cc_stdc} is set to @samp{no}. If you wrote your source
+-# code in ANSI C, you can make an un-ANSIfied copy of it by using the
+-# program @code{ansi2knr}, which comes with Ghostscript.
+-# @end defmac
+-
+-AC_DEFUN(AM_PROG_CC_STDC,
+-[AC_REQUIRE([AC_PROG_CC])
+-AC_BEFORE([$0], [AC_C_INLINE])
+-AC_BEFORE([$0], [AC_C_CONST])
+-dnl Force this before AC_PROG_CPP. Some cpp's, eg on HPUX, require
+-dnl a magic option to avoid problems with ANSI preprocessor commands
+-dnl like #elif.
+-dnl FIXME: can't do this because then AC_AIX won't work due to a
+-dnl circular dependency.
+-dnl AC_BEFORE([$0], [AC_PROG_CPP])
+-AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C)
+-AC_CACHE_VAL(am_cv_prog_cc_stdc,
+-[am_cv_prog_cc_stdc=no
+-ac_save_CC="$CC"
+-# Don't try gcc -ansi; that turns off useful extensions and
+-# breaks some systems' header files.
+-# AIX -qlanglvl=ansi
+-# Ultrix and OSF/1 -std1
+-# HP-UX -Aa -D_HPUX_SOURCE
+-# SVR4 -Xc -D__EXTENSIONS__
+-for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+-do
+- CC="$ac_save_CC $ac_arg"
+- AC_TRY_COMPILE(
+-[#include <stdarg.h>
+-#include <stdio.h>
+-#include <sys/types.h>
+-#include <sys/stat.h>
+-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+-struct buf { int x; };
+-FILE * (*rcsopen) (struct buf *, struct stat *, int);
+-static char *e (p, i)
+- char **p;
+- int i;
+-{
+- return p[i];
+-}
+-static char *f (char * (*g) (char **, int), char **p, ...)
+-{
+- char *s;
+- va_list v;
+- va_start (v,p);
+- s = g (p, va_arg (v,int));
+- va_end (v);
+- return s;
+-}
+-int test (int i, double x);
+-struct s1 {int (*f) (int a);};
+-struct s2 {int (*f) (double a);};
+-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+-int argc;
+-char **argv;
+-], [
+-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+-],
+-[am_cv_prog_cc_stdc="$ac_arg"; break])
++ am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
++AC_SUBST([am__leading_dot])])
++
++# Check to see how 'make' treats includes. -*- Autoconf -*-
++
++# Copyright (C) 2001-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_MAKE_INCLUDE()
++# -----------------
++# Check whether make has an 'include' directive that can support all
++# the idioms we need for our automatic dependency tracking code.
++AC_DEFUN([AM_MAKE_INCLUDE],
++[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive])
++cat > confinc.mk << 'END'
++am__doit:
++ @echo this is the am__doit target >confinc.out
++.PHONY: am__doit
++END
++am__include="#"
++am__quote=
++# BSD make does it like this.
++echo '.include "confinc.mk" # ignored' > confmf.BSD
++# Other make implementations (GNU, Solaris 10, AIX) do it like this.
++echo 'include confinc.mk # ignored' > confmf.GNU
++_am_result=no
++for s in GNU BSD; do
++ AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out])
++ AS_CASE([$?:`cat confinc.out 2>/dev/null`],
++ ['0:this is the am__doit target'],
++ [AS_CASE([$s],
++ [BSD], [am__include='.include' am__quote='"'],
++ [am__include='include' am__quote=''])])
++ if test "$am__include" != "#"; then
++ _am_result="yes ($s style)"
++ break
++ fi
+ done
+-CC="$ac_save_CC"
+-])
+-if test -z "$am_cv_prog_cc_stdc"; then
+- AC_MSG_RESULT([none needed])
++rm -f confinc.* confmf.*
++AC_MSG_RESULT([${_am_result}])
++AC_SUBST([am__include])])
++AC_SUBST([am__quote])])
++
++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
++
++# Copyright (C) 1997-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_MISSING_PROG(NAME, PROGRAM)
++# ------------------------------
++AC_DEFUN([AM_MISSING_PROG],
++[AC_REQUIRE([AM_MISSING_HAS_RUN])
++$1=${$1-"${am_missing_run}$2"}
++AC_SUBST($1)])
++
++# AM_MISSING_HAS_RUN
++# ------------------
++# Define MISSING if not defined so far and test if it is modern enough.
++# If it is, set am_missing_run to use it, otherwise, to nothing.
++AC_DEFUN([AM_MISSING_HAS_RUN],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++AC_REQUIRE_AUX_FILE([missing])dnl
++if test x"${MISSING+set}" != xset; then
++ case $am_aux_dir in
++ *\ * | *\ *)
++ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
++ *)
++ MISSING="\${SHELL} $am_aux_dir/missing" ;;
++ esac
++fi
++# Use eval to expand $SHELL
++if eval "$MISSING --is-lightweight"; then
++ am_missing_run="$MISSING "
+ else
+- AC_MSG_RESULT($am_cv_prog_cc_stdc)
++ am_missing_run=
++ AC_MSG_WARN(['missing' script is too old or missing])
+ fi
+-case "x$am_cv_prog_cc_stdc" in
+- x|xno) ;;
+- *) CC="$CC $am_cv_prog_cc_stdc" ;;
+-esac
+ ])
+
+-# Macro to add for using GNU gettext.
+-# Ulrich Drepper <drepper@cygnus.com>, 1995.
++# -*- Autoconf -*-
++# Obsolete and "removed" macros, that must however still report explicit
++# error messages when used, to smooth transition.
+ #
+-# This file file be copied and used freely without restrictions. It can
+-# be used in projects which are not available under the GNU Public License
+-# but which still want to provide support for the GNU gettext functionality.
+-# Please note that the actual code is *not* freely available.
+-
+-# serial 3
+-
+-AC_DEFUN(AM_WITH_NLS,
+- [AC_MSG_CHECKING([whether NLS is requested])
+- dnl Default is enabled NLS
+- AC_ARG_ENABLE(nls,
+- [ --disable-nls do not use Native Language Support],
+- USE_NLS=$enableval, USE_NLS=yes)
+- AC_MSG_RESULT($USE_NLS)
+- AC_SUBST(USE_NLS)
+-
+- USE_INCLUDED_LIBINTL=no
+-
+- dnl If we use NLS figure out what method
+- if test "$USE_NLS" = "yes"; then
+- AC_DEFINE(ENABLE_NLS)
+- AC_MSG_CHECKING([whether included gettext is requested])
+- AC_ARG_WITH(included-gettext,
+- [ --with-included-gettext use the GNU gettext library included here],
+- nls_cv_force_use_gnu_gettext=$withval,
+- nls_cv_force_use_gnu_gettext=no)
+- AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+-
+- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+- dnl User does not insist on using GNU NLS library. Figure out what
+- dnl to use. If gettext or catgets are available (in this order) we
+- dnl use this. Else we have to fall back to GNU NLS library.
+- dnl catgets is only used if permitted by option --with-catgets.
+- nls_cv_header_intl=
+- nls_cv_header_libgt=
+- CATOBJEXT=NONE
+-
+- AC_CHECK_HEADER(libintl.h,
+- [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
+- [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
+- gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
+-
+- if test "$gt_cv_func_gettext_libc" != "yes"; then
+- AC_CHECK_LIB(intl, bindtextdomain,
+- [AC_CACHE_CHECK([for gettext in libintl],
+- gt_cv_func_gettext_libintl,
+- [AC_TRY_LINK([], [return (int) gettext ("")],
+- gt_cv_func_gettext_libintl=yes,
+- gt_cv_func_gettext_libintl=no)])])
+- fi
+-
+- if test "$gt_cv_func_gettext_libc" = "yes" \
+- || test "$gt_cv_func_gettext_libintl" = "yes"; then
+- AC_DEFINE(HAVE_GETTEXT)
+- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
+- if test "$MSGFMT" != "no"; then
+- AC_CHECK_FUNCS(dcgettext)
+- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
+- return _nl_msg_cat_cntr],
+- [CATOBJEXT=.gmo
+- DATADIRNAME=share],
+- [CATOBJEXT=.mo
+- DATADIRNAME=lib])
+- INSTOBJEXT=.mo
+- fi
+- fi
+- ])
+-
+- if test "$CATOBJEXT" = "NONE"; then
+- AC_MSG_CHECKING([whether catgets can be used])
+- AC_ARG_WITH(catgets,
+- [ --with-catgets use catgets functions if available],
+- nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
+- AC_MSG_RESULT($nls_cv_use_catgets)
+-
+- if test "$nls_cv_use_catgets" = "yes"; then
+- dnl No gettext in C library. Try catgets next.
+- AC_CHECK_LIB(i, main)
+- AC_CHECK_FUNC(catgets,
+- [AC_DEFINE(HAVE_CATGETS)
+- INTLOBJS="\$(CATOBJS)"
+- AC_PATH_PROG(GENCAT, gencat, no)dnl
+- if test "$GENCAT" != "no"; then
+- AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
+- if test "$GMSGFMT" = "no"; then
+- AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
+- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
+- fi
+- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+- USE_INCLUDED_LIBINTL=yes
+- CATOBJEXT=.cat
+- INSTOBJEXT=.cat
+- DATADIRNAME=lib
+- INTLDEPS='$(top_builddir)/intl/libintl.a'
+- INTLLIBS=$INTLDEPS
+- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+- nls_cv_header_intl=intl/libintl.h
+- nls_cv_header_libgt=intl/libgettext.h
+- fi])
+- fi
+- fi
+-
+- if test "$CATOBJEXT" = "NONE"; then
+- dnl Neither gettext nor catgets in included in the C library.
+- dnl Fall back on GNU gettext library.
+- nls_cv_use_gnu_gettext=yes
+- fi
+- fi
++# Copyright (C) 1996-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++AC_DEFUN([AM_CONFIG_HEADER],
++[AC_DIAGNOSE([obsolete],
++['$0': this macro is obsolete.
++You should use the 'AC][_CONFIG_HEADERS' macro instead.])dnl
++AC_CONFIG_HEADERS($@)])
++
++AC_DEFUN([AM_PROG_CC_STDC],
++[AC_PROG_CC
++am_cv_prog_cc_stdc=$ac_cv_prog_cc_stdc
++AC_DIAGNOSE([obsolete],
++['$0': this macro is obsolete.
++You should simply use the 'AC][_PROG_CC' macro instead.
++Also, your code should no longer depend upon 'am_cv_prog_cc_stdc',
++but upon 'ac_cv_prog_cc_stdc'.])])
++
++AC_DEFUN([AM_C_PROTOTYPES],
++ [AC_FATAL([automatic de-ANSI-fication support has been removed])])
++AU_DEFUN([fp_C_PROTOTYPES], [AM_C_PROTOTYPES])
+
+- if test "$nls_cv_use_gnu_gettext" = "yes"; then
+- dnl Mark actions used to generate GNU NLS library.
+- INTLOBJS="\$(GETTOBJS)"
+- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
+- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+- AC_SUBST(MSGFMT)
+- USE_INCLUDED_LIBINTL=yes
+- CATOBJEXT=.gmo
+- INSTOBJEXT=.mo
+- DATADIRNAME=share
+- INTLDEPS='$(top_builddir)/intl/libintl.a'
+- INTLLIBS=$INTLDEPS
+- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+- nls_cv_header_intl=intl/libintl.h
+- nls_cv_header_libgt=intl/libgettext.h
+- fi
++# Helper functions for option handling. -*- Autoconf -*-
+
+- dnl Test whether we really found GNU xgettext.
+- if test "$XGETTEXT" != ":"; then
+- dnl If it is no GNU xgettext we define it as : so that the
+- dnl Makefiles still can work.
+- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+- : ;
+- else
+- AC_MSG_RESULT(
+- [found xgettext programs is not GNU xgettext; ignore it])
+- XGETTEXT=":"
+- fi
+- fi
++# Copyright (C) 2001-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# _AM_MANGLE_OPTION(NAME)
++# -----------------------
++AC_DEFUN([_AM_MANGLE_OPTION],
++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
++
++# _AM_SET_OPTION(NAME)
++# --------------------
++# Set option NAME. Presently that only means defining a flag for this option.
++AC_DEFUN([_AM_SET_OPTION],
++[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
++
++# _AM_SET_OPTIONS(OPTIONS)
++# ------------------------
++# OPTIONS is a space-separated list of Automake options.
++AC_DEFUN([_AM_SET_OPTIONS],
++[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
++
++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
++# -------------------------------------------
++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
++AC_DEFUN([_AM_IF_OPTION],
++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+- # We need to process the po/ directory.
+- POSUB=po
++# Copyright (C) 1999-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# _AM_PROG_CC_C_O
++# ---------------
++# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
++# to automatically call this.
++AC_DEFUN([_AM_PROG_CC_C_O],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++AC_REQUIRE_AUX_FILE([compile])dnl
++AC_LANG_PUSH([C])dnl
++AC_CACHE_CHECK(
++ [whether $CC understands -c and -o together],
++ [am_cv_prog_cc_c_o],
++ [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
++ # Make sure it works both with $CC and with simple cc.
++ # Following AC_PROG_CC_C_O, we do the test twice because some
++ # compilers refuse to overwrite an existing .o file with -o,
++ # though they will create one.
++ am_cv_prog_cc_c_o=yes
++ for am_i in 1 2; do
++ if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
++ && test -f conftest2.$ac_objext; then
++ : OK
+ else
+- DATADIRNAME=share
+- nls_cv_header_intl=intl/libintl.h
+- nls_cv_header_libgt=intl/libgettext.h
++ am_cv_prog_cc_c_o=no
++ break
+ fi
++ done
++ rm -f core conftest*
++ unset am_i])
++if test "$am_cv_prog_cc_c_o" != yes; then
++ # Losing compiler, so override with the script.
++ # FIXME: It is wrong to rewrite CC.
++ # But if we don't then we get into trouble of one sort or another.
++ # A longer-term fix would be to have automake use am__CC in this case,
++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
++ CC="$am_aux_dir/compile $CC"
++fi
++AC_LANG_POP([C])])
+
+- # If this is used in GNU gettext we have to set USE_NLS to `yes'
+- # because some of the sources are only built for this goal.
+- if test "$PACKAGE" = gettext; then
+- USE_NLS=yes
+- USE_INCLUDED_LIBINTL=yes
+- fi
++# For backward compatibility.
++AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+- dnl These rules are solely for the distribution goal. While doing this
+- dnl we only have to keep exactly one list of the available catalogs
+- dnl in configure.in.
+- for lang in $ALL_LINGUAS; do
+- GMOFILES="$GMOFILES $lang.gmo"
+- POFILES="$POFILES $lang.po"
+- done
++# Copyright (C) 2001-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_RUN_LOG(COMMAND)
++# -------------------
++# Run COMMAND, save the exit status in ac_status, and log it.
++# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
++AC_DEFUN([AM_RUN_LOG],
++[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
++ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ (exit $ac_status); }])
+
+- dnl Make all variables we use known to autoconf.
+- AC_SUBST(USE_INCLUDED_LIBINTL)
+- AC_SUBST(CATALOGS)
+- AC_SUBST(CATOBJEXT)
+- AC_SUBST(DATADIRNAME)
+- AC_SUBST(GMOFILES)
+- AC_SUBST(INSTOBJEXT)
+- AC_SUBST(INTLDEPS)
+- AC_SUBST(INTLLIBS)
+- AC_SUBST(INTLOBJS)
+- AC_SUBST(POFILES)
+- AC_SUBST(POSUB)
+- ])
+-
+-AC_DEFUN(AM_GNU_GETTEXT,
+- [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+- AC_REQUIRE([AC_PROG_CC])dnl
+- AC_REQUIRE([AC_PROG_RANLIB])dnl
+- AC_REQUIRE([AC_ISC_POSIX])dnl
+- AC_REQUIRE([AC_HEADER_STDC])dnl
+- AC_REQUIRE([AC_C_CONST])dnl
+- AC_REQUIRE([AC_C_INLINE])dnl
+- AC_REQUIRE([AC_TYPE_OFF_T])dnl
+- AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+- AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+- AC_REQUIRE([AC_FUNC_MMAP])dnl
+-
+- AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
+-unistd.h values.h sys/param.h])
+- AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
+-__argz_count __argz_stringify __argz_next])
+-
+- if test "${ac_cv_func_stpcpy+set}" != "set"; then
+- AC_CHECK_FUNCS(stpcpy)
+- fi
+- if test "${ac_cv_func_stpcpy}" = "yes"; then
+- AC_DEFINE(HAVE_STPCPY)
+- fi
+-
+- AM_LC_MESSAGES
+- AM_WITH_NLS
+-
+- if test "x$CATOBJEXT" != "x"; then
+- if test "x$ALL_LINGUAS" = "x"; then
+- LINGUAS=
+- else
+- AC_MSG_CHECKING(for catalogs to be installed)
+- NEW_LINGUAS=
+- for lang in ${LINGUAS=$ALL_LINGUAS}; do
+- case "$ALL_LINGUAS" in
+- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+- esac
+- done
+- LINGUAS=$NEW_LINGUAS
+- AC_MSG_RESULT($LINGUAS)
+- fi
+-
+- dnl Construct list of names of catalog files to be constructed.
+- if test -n "$LINGUAS"; then
+- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+- fi
+- fi
+-
+- dnl The reference to <locale.h> in the installed <libintl.h> file
+- dnl must be resolved because we cannot expect the users of this
+- dnl to define HAVE_LOCALE_H.
+- if test $ac_cv_header_locale_h = yes; then
+- INCLUDE_LOCALE_H="#include <locale.h>"
+- else
+- INCLUDE_LOCALE_H="\
+-/* The system does not provide the header <locale.h>. Take care yourself. */"
+- fi
+- AC_SUBST(INCLUDE_LOCALE_H)
+-
+- dnl Determine which catalog format we have (if any is needed)
+- dnl For now we know about two different formats:
+- dnl Linux libc-5 and the normal X/Open format
+- test -d intl || mkdir intl
+- if test "$CATOBJEXT" = ".cat"; then
+- AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
+-
+- dnl Transform the SED scripts while copying because some dumb SEDs
+- dnl cannot handle comments.
+- sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
+- fi
+- dnl po2tbl.sed is always needed.
+- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+- $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
+-
+- dnl In the intl/Makefile.in we have a special dependency which makes
+- dnl only sense for gettext. We comment this out for non-gettext
+- dnl packages.
+- if test "$PACKAGE" = "gettext"; then
+- GT_NO="#NO#"
+- GT_YES=
+- else
+- GT_NO=
+- GT_YES="#YES#"
+- fi
+- AC_SUBST(GT_NO)
+- AC_SUBST(GT_YES)
+-
+- dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
+- dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
+- dnl Try to locate is.
+- MKINSTALLDIRS=
+- if test -n "$ac_aux_dir"; then
+- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
+- fi
+- if test -z "$MKINSTALLDIRS"; then
+- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+- fi
+- AC_SUBST(MKINSTALLDIRS)
+-
+- dnl *** For now the libtool support in intl/Makefile is not for real.
+- l=
+- AC_SUBST(l)
+-
+- dnl Generate list of files to be processed by xgettext which will
+- dnl be included in po/Makefile.
+- test -d po || mkdir po
+- if test "x$srcdir" != "x."; then
+- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+- posrcprefix="$srcdir/"
+- else
+- posrcprefix="../$srcdir/"
+- fi
+- else
+- posrcprefix="../"
+- fi
+- rm -f po/POTFILES
+- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+- < $srcdir/po/POTFILES.in > po/POTFILES
+- ])
+-
+-# Search path for a program which passes the given test.
+-# Ulrich Drepper <drepper@cygnus.com>, 1996.
+-#
+-# This file file be copied and used freely without restrictions. It can
+-# be used in projects which are not available under the GNU Public License
+-# but which still want to provide support for the GNU gettext functionality.
+-# Please note that the actual code is *not* freely available.
+-
+-# serial 1
+-
+-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+-AC_DEFUN(AM_PATH_PROG_WITH_TEST,
+-[# Extract the first word of "$2", so it can be a program name with args.
+-set dummy $2; ac_word=[$]2
+-AC_MSG_CHECKING([for $ac_word])
+-AC_CACHE_VAL(ac_cv_path_$1,
+-[case "[$]$1" in
+- /*)
+- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+- ;;
+- *)
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+- for ac_dir in ifelse([$5], , $PATH, [$5]); do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- if [$3]; then
+- ac_cv_path_$1="$ac_dir/$ac_word"
+- break
+- fi
+- fi
+- done
+- IFS="$ac_save_ifs"
+-dnl If no 4th arg is given, leave the cache variable unset,
+-dnl so AC_PATH_PROGS will keep looking.
+-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+-])dnl
+- ;;
+-esac])dnl
+-$1="$ac_cv_path_$1"
+-if test -n "[$]$1"; then
+- AC_MSG_RESULT([$]$1)
++# Check to make sure that the build environment is sane. -*- Autoconf -*-
++
++# Copyright (C) 1996-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_SANITY_CHECK
++# ---------------
++AC_DEFUN([AM_SANITY_CHECK],
++[AC_MSG_CHECKING([whether build environment is sane])
++# Reject unsafe characters in $srcdir or the absolute working directory
++# name. Accept space and tab only in the latter.
++am_lf='
++'
++case `pwd` in
++ *[[\\\"\#\$\&\'\`$am_lf]]*)
++ AC_MSG_ERROR([unsafe absolute working directory name]);;
++esac
++case $srcdir in
++ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
++ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
++esac
++
++AC_MSG_RESULT([yes])
++])
++
++# Copyright (C) 2009-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_SILENT_RULES([DEFAULT])
++# --------------------------
++# Enable less verbose build rules; with the default set to DEFAULT
++# ("yes" being less verbose, "no" or empty being verbose).
++AC_DEFUN([AM_SILENT_RULES],
++[AC_ARG_ENABLE([silent-rules], [dnl
++AS_HELP_STRING(
++ [--enable-silent-rules],
++ [less verbose build output (undo: "make V=1")])
++AS_HELP_STRING(
++ [--disable-silent-rules],
++ [verbose build output (undo: "make V=0")])dnl
++])
++case $enable_silent_rules in @%:@ (((
++ yes) AM_DEFAULT_VERBOSITY=0;;
++ no) AM_DEFAULT_VERBOSITY=1;;
++ *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
++esac
++dnl
++dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
++dnl do not support nested variable expansions.
++dnl See automake bug#9928 and bug#10237.
++am_make=${MAKE-make}
++AC_CACHE_CHECK([whether $am_make supports nested variables],
++ [am_cv_make_support_nested_variables],
++ [if AS_ECHO([['TRUE=$(BAR$(V))
++BAR0=false
++BAR1=true
++V=1
++am__doit:
++ @$(TRUE)
++.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
++ am_cv_make_support_nested_variables=yes
++else
++ am_cv_make_support_nested_variables=no
++fi])
++if test $am_cv_make_support_nested_variables = yes; then
++ dnl Using '$V' instead of '$(V)' breaks IRIX make.
++ AM_V='$(V)'
++ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+ else
+- AC_MSG_RESULT(no)
++ AM_V=$AM_DEFAULT_VERBOSITY
++ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+ fi
+-AC_SUBST($1)dnl
++AC_SUBST([AM_V])dnl
++AM_SUBST_NOTMAKE([AM_V])dnl
++AC_SUBST([AM_DEFAULT_V])dnl
++AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
++AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
++AM_BACKSLASH='\'
++AC_SUBST([AM_BACKSLASH])dnl
++_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+ ])
+
+-# Check whether LC_MESSAGES is available in <locale.h>.
+-# Ulrich Drepper <drepper@cygnus.com>, 1995.
++# Copyright (C) 2001-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_PROG_INSTALL_STRIP
++# ---------------------
++# One issue with vendor 'install' (even GNU) is that you can't
++# specify the program used to strip binaries. This is especially
++# annoying in cross-compiling environments, where the build's strip
++# is unlikely to handle the host's binaries.
++# Fortunately install-sh will honor a STRIPPROG variable, so we
++# always use install-sh in "make install-strip", and initialize
++# STRIPPROG with the value of the STRIP variable (set by the user).
++AC_DEFUN([AM_PROG_INSTALL_STRIP],
++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
++# Installed binaries are usually stripped using 'strip' when the user
++# run "make install-strip". However 'strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the 'STRIP' environment variable to overrule this program.
++dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
++if test "$cross_compiling" != no; then
++ AC_CHECK_TOOL([STRIP], [strip], :)
++fi
++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
++AC_SUBST([INSTALL_STRIP_PROGRAM])])
++
++# Copyright (C) 2006-2018 Free Software Foundation, Inc.
+ #
+-# This file file be copied and used freely without restrictions. It can
+-# be used in projects which are not available under the GNU Public License
+-# but which still want to provide support for the GNU gettext functionality.
+-# Please note that the actual code is *not* freely available.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# _AM_SUBST_NOTMAKE(VARIABLE)
++# ---------------------------
++# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
++# This macro is traced by Automake.
++AC_DEFUN([_AM_SUBST_NOTMAKE])
++
++# AM_SUBST_NOTMAKE(VARIABLE)
++# --------------------------
++# Public sister of _AM_SUBST_NOTMAKE.
++AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+-# serial 1
++# Check how to create a tarball. -*- Autoconf -*-
+
+-AC_DEFUN(AM_LC_MESSAGES,
+- [if test $ac_cv_header_locale_h = yes; then
+- AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+- [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+- am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+- if test $am_cv_val_LC_MESSAGES = yes; then
+- AC_DEFINE(HAVE_LC_MESSAGES)
++# Copyright (C) 2004-2018 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# _AM_PROG_TAR(FORMAT)
++# --------------------
++# Check how to create a tarball in format FORMAT.
++# FORMAT should be one of 'v7', 'ustar', or 'pax'.
++#
++# Substitute a variable $(am__tar) that is a command
++# writing to stdout a FORMAT-tarball containing the directory
++# $tardir.
++# tardir=directory && $(am__tar) > result.tar
++#
++# Substitute a variable $(am__untar) that extract such
++# a tarball read from stdin.
++# $(am__untar) < result.tar
++#
++AC_DEFUN([_AM_PROG_TAR],
++[# Always define AMTAR for backward compatibility. Yes, it's still used
++# in the wild :-( We should find a proper way to deprecate it ...
++AC_SUBST([AMTAR], ['$${TAR-tar}'])
++
++# We'll loop over all known methods to create a tar archive until one works.
++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
++
++m4_if([$1], [v7],
++ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
++
++ [m4_case([$1],
++ [ustar],
++ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
++ # There is notably a 21 bits limit for the UID and the GID. In fact,
++ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
++ # and bug#13588).
++ am_max_uid=2097151 # 2^21 - 1
++ am_max_gid=$am_max_uid
++ # The $UID and $GID variables are not portable, so we need to resort
++ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
++ # below are definitely unexpected, so allow the users to see them
++ # (that is, avoid stderr redirection).
++ am_uid=`id -u || echo unknown`
++ am_gid=`id -g || echo unknown`
++ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
++ if test $am_uid -le $am_max_uid; then
++ AC_MSG_RESULT([yes])
++ else
++ AC_MSG_RESULT([no])
++ _am_tools=none
++ fi
++ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
++ if test $am_gid -le $am_max_gid; then
++ AC_MSG_RESULT([yes])
++ else
++ AC_MSG_RESULT([no])
++ _am_tools=none
++ fi],
++
++ [pax],
++ [],
++
++ [m4_fatal([Unknown tar format])])
++
++ AC_MSG_CHECKING([how to create a $1 tar archive])
++
++ # Go ahead even if we have the value already cached. We do so because we
++ # need to set the values for the 'am__tar' and 'am__untar' variables.
++ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
++
++ for _am_tool in $_am_tools; do
++ case $_am_tool in
++ gnutar)
++ for _am_tar in tar gnutar gtar; do
++ AM_RUN_LOG([$_am_tar --version]) && break
++ done
++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
++ am__untar="$_am_tar -xf -"
++ ;;
++ plaintar)
++ # Must skip GNU tar: if it does not support --format= it doesn't create
++ # ustar tarball either.
++ (tar --version) >/dev/null 2>&1 && continue
++ am__tar='tar chf - "$$tardir"'
++ am__tar_='tar chf - "$tardir"'
++ am__untar='tar xf -'
++ ;;
++ pax)
++ am__tar='pax -L -x $1 -w "$$tardir"'
++ am__tar_='pax -L -x $1 -w "$tardir"'
++ am__untar='pax -r'
++ ;;
++ cpio)
++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
++ am__untar='cpio -i -H $1 -d'
++ ;;
++ none)
++ am__tar=false
++ am__tar_=false
++ am__untar=false
++ ;;
++ esac
++
++ # If the value was cached, stop now. We just wanted to have am__tar
++ # and am__untar set.
++ test -n "${am_cv_prog_tar_$1}" && break
++
++ # tar/untar a dummy directory, and stop if the command works.
++ rm -rf conftest.dir
++ mkdir conftest.dir
++ echo GrepMe > conftest.dir/file
++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
++ rm -rf conftest.dir
++ if test -s conftest.tar; then
++ AM_RUN_LOG([$am__untar <conftest.tar])
++ AM_RUN_LOG([cat conftest.dir/file])
++ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+- fi])
++ done
++ rm -rf conftest.dir
++
++ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
++ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
++AC_SUBST([am__tar])
++AC_SUBST([am__untar])
++]) # _AM_PROG_TAR
++
++m4_include([m4/gettext.m4])
++m4_include([m4/host-cpu-c-abi.m4])
++m4_include([m4/iconv.m4])
++m4_include([m4/intlmacosx.m4])
++m4_include([m4/lib-ld.m4])
++m4_include([m4/lib-link.m4])
++m4_include([m4/lib-prefix.m4])
++m4_include([m4/nls.m4])
++m4_include([m4/po.m4])
++m4_include([m4/progtest.m4])
++m4_include([acinclude.m4])
+diff -uprN clean/lrzsz-0.12.20/ChangeLog lrzsz-0.12.20/ChangeLog
+--- clean/lrzsz-0.12.20/ChangeLog 1998-12-29 22:49:56.000000000 +0000
++++ lrzsz-0.12.20/ChangeLog 2019-11-25 18:11:54.000000000 +0000
+@@ -1,3 +1,9 @@
++2019-11-25 gettextize <bug-gnu-gettext@gnu.org>
++
++ * Makefile.am (SUBDIRS): Remove intl.
++ (ACLOCAL_AMFLAGS): New variable.
++ (EXTRA_DIST): Add config.rpath, m4/ChangeLog.
++
+ 1998-12-29 Uwe Ohse <uwe@ohse.de>
+
+ * src/lrz.c: removed stpcpy call.
+diff -uprN clean/lrzsz-0.12.20/compile lrzsz-0.12.20/compile
+--- clean/lrzsz-0.12.20/compile 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/compile 2019-09-30 10:52:39.000000000 +0100
+@@ -0,0 +1,348 @@
++#! /bin/sh
++# Wrapper for compilers which do not understand '-c -o'.
++
++scriptversion=2016-01-11.22; # UTC
++
++# Copyright (C) 1999-2017 Free Software Foundation, Inc.
++# Written by Tom Tromey <tromey@cygnus.com>.
++#
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program. If not, see <http://www.gnu.org/licenses/>.
++
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++# This file is maintained in Automake, please report
++# bugs to <bug-automake@gnu.org> or send patches to
++# <automake-patches@gnu.org>.
++
++nl='
++'
++
++# We need space, tab and new line, in precisely that order. Quoting is
++# there to prevent tools from complaining about whitespace usage.
++IFS=" "" $nl"
++
++file_conv=
++
++# func_file_conv build_file lazy
++# Convert a $build file to $host form and store it in $file
++# Currently only supports Windows hosts. If the determined conversion
++# type is listed in (the comma separated) LAZY, no conversion will
++# take place.
++func_file_conv ()
++{
++ file=$1
++ case $file in
++ / | /[!/]*) # absolute file, and not a UNC file
++ if test -z "$file_conv"; then
++ # lazily determine how to convert abs files
++ case `uname -s` in
++ MINGW*)
++ file_conv=mingw
++ ;;
++ CYGWIN*)
++ file_conv=cygwin
++ ;;
++ *)
++ file_conv=wine
++ ;;
++ esac
++ fi
++ case $file_conv/,$2, in
++ *,$file_conv,*)
++ ;;
++ mingw/*)
++ file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
++ ;;
++ cygwin/*)
++ file=`cygpath -m "$file" || echo "$file"`
++ ;;
++ wine/*)
++ file=`winepath -w "$file" || echo "$file"`
++ ;;
++ esac
++ ;;
++ esac
++}
++
++# func_cl_dashL linkdir
++# Make cl look for libraries in LINKDIR
++func_cl_dashL ()
++{
++ func_file_conv "$1"
++ if test -z "$lib_path"; then
++ lib_path=$file
++ else
++ lib_path="$lib_path;$file"
++ fi
++ linker_opts="$linker_opts -LIBPATH:$file"
++}
++
++# func_cl_dashl library
++# Do a library search-path lookup for cl
++func_cl_dashl ()
++{
++ lib=$1
++ found=no
++ save_IFS=$IFS
++ IFS=';'
++ for dir in $lib_path $LIB
++ do
++ IFS=$save_IFS
++ if $shared && test -f "$dir/$lib.dll.lib"; then
++ found=yes
++ lib=$dir/$lib.dll.lib
++ break
++ fi
++ if test -f "$dir/$lib.lib"; then
++ found=yes
++ lib=$dir/$lib.lib
++ break
++ fi
++ if test -f "$dir/lib$lib.a"; then
++ found=yes
++ lib=$dir/lib$lib.a
++ break
++ fi
++ done
++ IFS=$save_IFS
++
++ if test "$found" != yes; then
++ lib=$lib.lib
++ fi
++}
++
++# func_cl_wrapper cl arg...
++# Adjust compile command to suit cl
++func_cl_wrapper ()
++{
++ # Assume a capable shell
++ lib_path=
++ shared=:
++ linker_opts=
++ for arg
++ do
++ if test -n "$eat"; then
++ eat=
++ else
++ case $1 in
++ -o)
++ # configure might choose to run compile as 'compile cc -o foo foo.c'.
++ eat=1
++ case $2 in
++ *.o | *.[oO][bB][jJ])
++ func_file_conv "$2"
++ set x "$@" -Fo"$file"
++ shift
++ ;;
++ *)
++ func_file_conv "$2"
++ set x "$@" -Fe"$file"
++ shift
++ ;;
++ esac
++ ;;
++ -I)
++ eat=1
++ func_file_conv "$2" mingw
++ set x "$@" -I"$file"
++ shift
++ ;;
++ -I*)
++ func_file_conv "${1#-I}" mingw
++ set x "$@" -I"$file"
++ shift
++ ;;
++ -l)
++ eat=1
++ func_cl_dashl "$2"
++ set x "$@" "$lib"
++ shift
++ ;;
++ -l*)
++ func_cl_dashl "${1#-l}"
++ set x "$@" "$lib"
++ shift
++ ;;
++ -L)
++ eat=1
++ func_cl_dashL "$2"
++ ;;
++ -L*)
++ func_cl_dashL "${1#-L}"
++ ;;
++ -static)
++ shared=false
++ ;;
++ -Wl,*)
++ arg=${1#-Wl,}
++ save_ifs="$IFS"; IFS=','
++ for flag in $arg; do
++ IFS="$save_ifs"
++ linker_opts="$linker_opts $flag"
++ done
++ IFS="$save_ifs"
++ ;;
++ -Xlinker)
++ eat=1
++ linker_opts="$linker_opts $2"
++ ;;
++ -*)
++ set x "$@" "$1"
++ shift
++ ;;
++ *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
++ func_file_conv "$1"
++ set x "$@" -Tp"$file"
++ shift
++ ;;
++ *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
++ func_file_conv "$1" mingw
++ set x "$@" "$file"
++ shift
++ ;;
++ *)
++ set x "$@" "$1"
++ shift
++ ;;
++ esac
++ fi
++ shift
++ done
++ if test -n "$linker_opts"; then
++ linker_opts="-link$linker_opts"
++ fi
++ exec "$@" $linker_opts
++ exit 1
++}
++
++eat=
++
++case $1 in
++ '')
++ echo "$0: No command. Try '$0 --help' for more information." 1>&2
++ exit 1;
++ ;;
++ -h | --h*)
++ cat <<\EOF
++Usage: compile [--help] [--version] PROGRAM [ARGS]
++
++Wrapper for compilers which do not understand '-c -o'.
++Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
++arguments, and rename the output as expected.
++
++If you are trying to build a whole package this is not the
++right script to run: please start by reading the file 'INSTALL'.
++
++Report bugs to <bug-automake@gnu.org>.
++EOF
++ exit $?
++ ;;
++ -v | --v*)
++ echo "compile $scriptversion"
++ exit $?
++ ;;
++ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
++ icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
++ func_cl_wrapper "$@" # Doesn't return...
++ ;;
++esac
++
++ofile=
++cfile=
++
++for arg
++do
++ if test -n "$eat"; then
++ eat=
++ else
++ case $1 in
++ -o)
++ # configure might choose to run compile as 'compile cc -o foo foo.c'.
++ # So we strip '-o arg' only if arg is an object.
++ eat=1
++ case $2 in
++ *.o | *.obj)
++ ofile=$2
++ ;;
++ *)
++ set x "$@" -o "$2"
++ shift
++ ;;
++ esac
++ ;;
++ *.c)
++ cfile=$1
++ set x "$@" "$1"
++ shift
++ ;;
++ *)
++ set x "$@" "$1"
++ shift
++ ;;
++ esac
++ fi
++ shift
++done
++
++if test -z "$ofile" || test -z "$cfile"; then
++ # If no '-o' option was seen then we might have been invoked from a
++ # pattern rule where we don't need one. That is ok -- this is a
++ # normal compilation that the losing compiler can handle. If no
++ # '.c' file was seen then we are probably linking. That is also
++ # ok.
++ exec "$@"
++fi
++
++# Name of file we expect compiler to create.
++cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
++
++# Create the lock directory.
++# Note: use '[/\\:.-]' here to ensure that we don't use the same name
++# that we are using for the .o file. Also, base the name on the expected
++# object file name, since that is what matters with a parallel build.
++lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
++while true; do
++ if mkdir "$lockdir" >/dev/null 2>&1; then
++ break
++ fi
++ sleep 1
++done
++# FIXME: race condition here if user kills between mkdir and trap.
++trap "rmdir '$lockdir'; exit 1" 1 2 15
++
++# Run the compile.
++"$@"
++ret=$?
++
++if test -f "$cofile"; then
++ test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
++elif test -f "${cofile}bj"; then
++ test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
++fi
++
++rmdir "$lockdir"
++exit $ret
++
++# Local Variables:
++# mode: shell-script
++# sh-indentation: 2
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-time-zone: "UTC0"
++# time-stamp-end: "; # UTC"
++# End:
+diff -uprN clean/lrzsz-0.12.20/config.guess lrzsz-0.12.20/config.guess
+--- clean/lrzsz-0.12.20/config.guess 1998-04-26 14:20:59.000000000 +0100
++++ lrzsz-0.12.20/config.guess 2019-11-26 11:37:46.000000000 +0000
+@@ -1,10 +1,12 @@
+ #! /bin/sh
+ # Attempt to guess a canonical system name.
+-# Copyright (C) 1992, 93, 94, 95, 1996 Free Software Foundation, Inc.
+-#
++# Copyright 1992-2019 Free Software Foundation, Inc.
++
++timestamp='2019-04-28'
++
+ # This file is free software; you can redistribute it and/or modify it
+ # under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2 of the License, or
++# the Free Software Foundation; either version 3 of the License, or
+ # (at your option) any later version.
+ #
+ # This program is distributed in the hope that it will be useful, but
+@@ -13,82 +15,403 @@
+ # General Public License for more details.
+ #
+ # You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++# along with this program; if not, see <https://www.gnu.org/licenses/>.
+ #
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+-# the same distribution terms that you use for the rest of that program.
+-
+-# Written by Per Bothner <bothner@cygnus.com>.
+-# The master version of this file is at the FSF in /home/gd/gnu/lib.
++# the same distribution terms that you use for the rest of that
++# program. This Exception is an additional permission under section 7
++# of the GNU General Public License, version 3 ("GPLv3").
+ #
+-# This script attempts to guess a canonical system name similar to
+-# config.sub. If it succeeds, it prints the system name on stdout, and
+-# exits with 0. Otherwise, it exits with 1.
++# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
+ #
+-# The plan is that this can be called by configure scripts if you
+-# don't specify an explicit system type (host/target name).
+-#
+-# Only a few systems have been added to this list; please add others
+-# (but try to keep the structure clean).
++# You can get the latest version of this script from:
++# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+ #
++# Please send patches to <config-patches@gnu.org>.
++
++
++me=`echo "$0" | sed -e 's,.*/,,'`
++
++usage="\
++Usage: $0 [OPTION]
++
++Output the configuration name of the system \`$me' is run on.
++
++Options:
++ -h, --help print this help, then exit
++ -t, --time-stamp print date of last modification, then exit
++ -v, --version print version number, then exit
++
++Report bugs and patches to <config-patches@gnu.org>."
++
++version="\
++GNU config.guess ($timestamp)
++
++Originally written by Per Bothner.
++Copyright 1992-2019 Free Software Foundation, Inc.
++
++This is free software; see the source for copying conditions. There is NO
++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++
++help="
++Try \`$me --help' for more information."
++
++# Parse command line
++while test $# -gt 0 ; do
++ case $1 in
++ --time-stamp | --time* | -t )
++ echo "$timestamp" ; exit ;;
++ --version | -v )
++ echo "$version" ; exit ;;
++ --help | --h* | -h )
++ echo "$usage"; exit ;;
++ -- ) # Stop option processing
++ shift; break ;;
++ - ) # Use stdin as input.
++ break ;;
++ -* )
++ echo "$me: invalid option $1$help" >&2
++ exit 1 ;;
++ * )
++ break ;;
++ esac
++done
++
++if test $# != 0; then
++ echo "$me: too many arguments$help" >&2
++ exit 1
++fi
++
++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
++# compiler to aid in system detection is discouraged as it requires
++# temporary files to be created and, as you can see below, it is a
++# headache to deal with in a portable fashion.
++
++# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
++# use `HOST_CC' if defined, but it is deprecated.
++
++# Portable tmp directory creation inspired by the Autoconf team.
++
++tmp=
++# shellcheck disable=SC2172
++trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15
++
++set_cc_for_build() {
++ : "${TMPDIR=/tmp}"
++ # shellcheck disable=SC2039
++ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } ||
++ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } ||
++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; }
++ dummy=$tmp/dummy
++ case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in
++ ,,) echo "int x;" > "$dummy.c"
++ for driver in cc gcc c89 c99 ; do
++ if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
++ CC_FOR_BUILD="$driver"
++ break
++ fi
++ done
++ if test x"$CC_FOR_BUILD" = x ; then
++ CC_FOR_BUILD=no_compiler_found
++ fi
++ ;;
++ ,,*) CC_FOR_BUILD=$CC ;;
++ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
++ esac
++}
+
+ # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+-# (ghazi@noc.rutgers.edu 8/24/94.)
+-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
++# (ghazi@noc.rutgers.edu 1994-08-24)
++if test -f /.attbin/uname ; then
+ PATH=$PATH:/.attbin ; export PATH
+ fi
+
+ UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
++UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+ UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+-trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
++case "$UNAME_SYSTEM" in
++Linux|GNU|GNU/*)
++ # If the system lacks a compiler, then just pick glibc.
++ # We could probably try harder.
++ LIBC=gnu
++
++ set_cc_for_build
++ cat <<-EOF > "$dummy.c"
++ #include <features.h>
++ #if defined(__UCLIBC__)
++ LIBC=uclibc
++ #elif defined(__dietlibc__)
++ LIBC=dietlibc
++ #else
++ LIBC=gnu
++ #endif
++ EOF
++ eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`"
++
++ # If ldd exists, use it to detect musl libc.
++ if command -v ldd >/dev/null && \
++ ldd --version 2>&1 | grep -q ^musl
++ then
++ LIBC=musl
++ fi
++ ;;
++esac
+
+ # Note: order is significant - the case branches are not exclusive.
+
+-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
++case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in
++ *:NetBSD:*:*)
++ # NetBSD (nbsd) targets should (where applicable) match one or
++ # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
++ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
++ # switched to ELF, *-*-netbsd* would select the old
++ # object file format. This provides both forward
++ # compatibility and a consistent mechanism for selecting the
++ # object file format.
++ #
++ # Note: NetBSD doesn't particularly care about the vendor
++ # portion of the name. We always set it to "unknown".
++ sysctl="sysctl -n hw.machine_arch"
++ UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
++ "/sbin/$sysctl" 2>/dev/null || \
++ "/usr/sbin/$sysctl" 2>/dev/null || \
++ echo unknown)`
++ case "$UNAME_MACHINE_ARCH" in
++ armeb) machine=armeb-unknown ;;
++ arm*) machine=arm-unknown ;;
++ sh3el) machine=shl-unknown ;;
++ sh3eb) machine=sh-unknown ;;
++ sh5el) machine=sh5le-unknown ;;
++ earmv*)
++ arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
++ endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'`
++ machine="${arch}${endian}"-unknown
++ ;;
++ *) machine="$UNAME_MACHINE_ARCH"-unknown ;;
++ esac
++ # The Operating System including object format, if it has switched
++ # to ELF recently (or will in the future) and ABI.
++ case "$UNAME_MACHINE_ARCH" in
++ earm*)
++ os=netbsdelf
++ ;;
++ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
++ set_cc_for_build
++ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
++ | grep -q __ELF__
++ then
++ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
++ # Return netbsd for either. FIX?
++ os=netbsd
++ else
++ os=netbsdelf
++ fi
++ ;;
++ *)
++ os=netbsd
++ ;;
++ esac
++ # Determine ABI tags.
++ case "$UNAME_MACHINE_ARCH" in
++ earm*)
++ expr='s/^earmv[0-9]/-eabi/;s/eb$//'
++ abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"`
++ ;;
++ esac
++ # The OS release
++ # Debian GNU/NetBSD machines have a different userland, and
++ # thus, need a distinct triplet. However, they do not need
++ # kernel version information, so it can be replaced with a
++ # suitable tag, in the style of linux-gnu.
++ case "$UNAME_VERSION" in
++ Debian*)
++ release='-gnu'
++ ;;
++ *)
++ release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2`
++ ;;
++ esac
++ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
++ # contains redundant information, the shorter form:
++ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
++ echo "$machine-${os}${release}${abi-}"
++ exit ;;
++ *:Bitrig:*:*)
++ UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
++ echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE"
++ exit ;;
++ *:OpenBSD:*:*)
++ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
++ echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE"
++ exit ;;
++ *:LibertyBSD:*:*)
++ UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
++ echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE"
++ exit ;;
++ *:MidnightBSD:*:*)
++ echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE"
++ exit ;;
++ *:ekkoBSD:*:*)
++ echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE"
++ exit ;;
++ *:SolidBSD:*:*)
++ echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE"
++ exit ;;
++ macppc:MirBSD:*:*)
++ echo powerpc-unknown-mirbsd"$UNAME_RELEASE"
++ exit ;;
++ *:MirBSD:*:*)
++ echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE"
++ exit ;;
++ *:Sortix:*:*)
++ echo "$UNAME_MACHINE"-unknown-sortix
++ exit ;;
++ *:Redox:*:*)
++ echo "$UNAME_MACHINE"-unknown-redox
++ exit ;;
++ mips:OSF1:*.*)
++ echo mips-dec-osf1
++ exit ;;
+ alpha:OSF1:*:*)
++ case $UNAME_RELEASE in
++ *4.0)
++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
++ ;;
++ *5.*)
++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
++ ;;
++ esac
++ # According to Compaq, /usr/sbin/psrinfo has been available on
++ # OSF/1 and Tru64 systems produced since 1995. I hope that
++ # covers most systems running today. This code pipes the CPU
++ # types through head -n 1, so we only detect the type of CPU 0.
++ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
++ case "$ALPHA_CPU_TYPE" in
++ "EV4 (21064)")
++ UNAME_MACHINE=alpha ;;
++ "EV4.5 (21064)")
++ UNAME_MACHINE=alpha ;;
++ "LCA4 (21066/21068)")
++ UNAME_MACHINE=alpha ;;
++ "EV5 (21164)")
++ UNAME_MACHINE=alphaev5 ;;
++ "EV5.6 (21164A)")
++ UNAME_MACHINE=alphaev56 ;;
++ "EV5.6 (21164PC)")
++ UNAME_MACHINE=alphapca56 ;;
++ "EV5.7 (21164PC)")
++ UNAME_MACHINE=alphapca57 ;;
++ "EV6 (21264)")
++ UNAME_MACHINE=alphaev6 ;;
++ "EV6.7 (21264A)")
++ UNAME_MACHINE=alphaev67 ;;
++ "EV6.8CB (21264C)")
++ UNAME_MACHINE=alphaev68 ;;
++ "EV6.8AL (21264B)")
++ UNAME_MACHINE=alphaev68 ;;
++ "EV6.8CX (21264D)")
++ UNAME_MACHINE=alphaev68 ;;
++ "EV6.9A (21264/EV69A)")
++ UNAME_MACHINE=alphaev69 ;;
++ "EV7 (21364)")
++ UNAME_MACHINE=alphaev7 ;;
++ "EV7.9 (21364A)")
++ UNAME_MACHINE=alphaev79 ;;
++ esac
++ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+- echo alpha-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//'`
+- exit 0 ;;
+- 21064:Windows_NT:50:3)
+- echo alpha-dec-winnt3.5
+- exit 0 ;;
++ echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`"
++ # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
++ exitcode=$?
++ trap '' 0
++ exit $exitcode ;;
+ Amiga*:UNIX_System_V:4.0:*)
+- echo m68k-cbm-sysv4
+- exit 0;;
+- amiga:NetBSD:*:*)
+- echo m68k-cbm-netbsd${UNAME_RELEASE}
+- exit 0 ;;
++ echo m68k-unknown-sysv4
++ exit ;;
++ *:[Aa]miga[Oo][Ss]:*:*)
++ echo "$UNAME_MACHINE"-unknown-amigaos
++ exit ;;
++ *:[Mm]orph[Oo][Ss]:*:*)
++ echo "$UNAME_MACHINE"-unknown-morphos
++ exit ;;
++ *:OS/390:*:*)
++ echo i370-ibm-openedition
++ exit ;;
++ *:z/VM:*:*)
++ echo s390-ibm-zvmoe
++ exit ;;
++ *:OS400:*:*)
++ echo powerpc-ibm-os400
++ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+- echo arm-acorn-riscix${UNAME_RELEASE}
+- exit 0;;
+- Pyramid*:OSx*:*:*)
++ echo arm-acorn-riscix"$UNAME_RELEASE"
++ exit ;;
++ arm*:riscos:*:*|arm*:RISCOS:*:*)
++ echo arm-unknown-riscos
++ exit ;;
++ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
++ echo hppa1.1-hitachi-hiuxmpp
++ exit ;;
++ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
++ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+- exit 0 ;;
+- sun4*:SunOS:5.*:*)
+- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
+- i86pc:SunOS:5.*:*)
+- echo i386-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ exit ;;
++ NILE*:*:*:dcosx)
++ echo pyramid-pyramid-svr4
++ exit ;;
++ DRS?6000:unix:4.0:6*)
++ echo sparc-icl-nx6
++ exit ;;
++ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
++ case `/usr/bin/uname -p` in
++ sparc) echo sparc-icl-nx7; exit ;;
++ esac ;;
++ s390x:SunOS:*:*)
++ echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
++ exit ;;
++ sun4H:SunOS:5.*:*)
++ echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
++ exit ;;
++ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
++ echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
++ exit ;;
++ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
++ echo i386-pc-auroraux"$UNAME_RELEASE"
++ exit ;;
++ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
++ set_cc_for_build
++ SUN_ARCH=i386
++ # If there is a compiler, see if it is configured for 64-bit objects.
++ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
++ # This test works for both compilers.
++ if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
++ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
++ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
++ grep IS_64BIT_ARCH >/dev/null
++ then
++ SUN_ARCH=x86_64
++ fi
++ fi
++ echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
++ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
++ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+@@ -96,82 +419,170 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+- exit 0 ;;
++ echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`"
++ exit ;;
+ sun3*:SunOS:*:*)
+- echo m68k-sun-sunos${UNAME_RELEASE}
+- exit 0 ;;
+- atari*:NetBSD:*:*)
+- echo m68k-atari-netbsd${UNAME_RELEASE}
+- exit 0 ;;
+- sun3*:NetBSD:*:*)
+- echo m68k-sun-netbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mac68k:NetBSD:*:*)
+- echo m68k-apple-netbsd${UNAME_RELEASE}
+- exit 0 ;;
++ echo m68k-sun-sunos"$UNAME_RELEASE"
++ exit ;;
++ sun*:*:4.2BSD:*)
++ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
++ test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
++ case "`/bin/arch`" in
++ sun3)
++ echo m68k-sun-sunos"$UNAME_RELEASE"
++ ;;
++ sun4)
++ echo sparc-sun-sunos"$UNAME_RELEASE"
++ ;;
++ esac
++ exit ;;
++ aushp:SunOS:*:*)
++ echo sparc-auspex-sunos"$UNAME_RELEASE"
++ exit ;;
++ # The situation for MiNT is a little confusing. The machine name
++ # can be virtually everything (everything which is not
++ # "atarist" or "atariste" at least should have a processor
++ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
++ # to the lowercase version "mint" (or "freemint"). Finally
++ # the system name "TOS" denotes a system which is actually not
++ # MiNT. But MiNT is downward compatible to TOS, so this should
++ # be no problem.
++ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
++ echo m68k-atari-mint"$UNAME_RELEASE"
++ exit ;;
++ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
++ echo m68k-atari-mint"$UNAME_RELEASE"
++ exit ;;
++ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
++ echo m68k-atari-mint"$UNAME_RELEASE"
++ exit ;;
++ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
++ echo m68k-milan-mint"$UNAME_RELEASE"
++ exit ;;
++ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
++ echo m68k-hades-mint"$UNAME_RELEASE"
++ exit ;;
++ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
++ echo m68k-unknown-mint"$UNAME_RELEASE"
++ exit ;;
++ m68k:machten:*:*)
++ echo m68k-apple-machten"$UNAME_RELEASE"
++ exit ;;
++ powerpc:machten:*:*)
++ echo powerpc-apple-machten"$UNAME_RELEASE"
++ exit ;;
++ RISC*:Mach:*:*)
++ echo mips-dec-mach_bsd4.3
++ exit ;;
+ RISC*:ULTRIX:*:*)
+- echo mips-dec-ultrix${UNAME_RELEASE}
+- exit 0 ;;
++ echo mips-dec-ultrix"$UNAME_RELEASE"
++ exit ;;
+ VAX*:ULTRIX*:*:*)
+- echo vax-dec-ultrix${UNAME_RELEASE}
+- exit 0 ;;
+- mips:*:4*:UMIPS)
+- echo mips-mips-riscos4sysv
+- exit 0 ;;
+- mips:*:5*:RISCos)
+- echo mips-mips-riscos${UNAME_RELEASE}
+- exit 0 ;;
++ echo vax-dec-ultrix"$UNAME_RELEASE"
++ exit ;;
++ 2020:CLIX:*:* | 2430:CLIX:*:*)
++ echo clipper-intergraph-clix"$UNAME_RELEASE"
++ exit ;;
++ mips:*:*:UMIPS | mips:*:*:RISCos)
++ set_cc_for_build
++ sed 's/^ //' << EOF > "$dummy.c"
++#ifdef __cplusplus
++#include <stdio.h> /* for printf() prototype */
++ int main (int argc, char *argv[]) {
++#else
++ int main (argc, argv) int argc; char *argv[]; {
++#endif
++ #if defined (host_mips) && defined (MIPSEB)
++ #if defined (SYSTYPE_SYSV)
++ printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0);
++ #endif
++ #if defined (SYSTYPE_SVR4)
++ printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0);
++ #endif
++ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
++ printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0);
++ #endif
++ #endif
++ exit (-1);
++ }
++EOF
++ $CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
++ dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` &&
++ SYSTEM_NAME=`"$dummy" "$dummyarg"` &&
++ { echo "$SYSTEM_NAME"; exit; }
++ echo mips-mips-riscos"$UNAME_RELEASE"
++ exit ;;
++ Motorola:PowerMAX_OS:*:*)
++ echo powerpc-motorola-powermax
++ exit ;;
++ Motorola:*:4.3:PL8-*)
++ echo powerpc-harris-powermax
++ exit ;;
++ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
++ echo powerpc-harris-powermax
++ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+- exit 0 ;;
++ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+- exit 0 ;;
++ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+- exit 0 ;;
++ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+- exit 0 ;;
++ exit ;;
+ AViiON:dgux:*:*)
+- # DG/UX returns AViiON for all architectures
+- UNAME_PROCESSOR=`/usr/bin/uname -p`
+- if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88100 ] ; then
+- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
+- -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
+- echo m88k-dg-dgux${UNAME_RELEASE}
+- else
+- echo m88k-dg-dguxbcs${UNAME_RELEASE}
+- fi
+- else echo i586-dg-dgux${UNAME_RELEASE}
+- fi
+- exit 0 ;;
++ # DG/UX returns AViiON for all architectures
++ UNAME_PROCESSOR=`/usr/bin/uname -p`
++ if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ]
++ then
++ if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \
++ [ "$TARGET_BINARY_INTERFACE"x = x ]
++ then
++ echo m88k-dg-dgux"$UNAME_RELEASE"
++ else
++ echo m88k-dg-dguxbcs"$UNAME_RELEASE"
++ fi
++ else
++ echo i586-dg-dgux"$UNAME_RELEASE"
++ fi
++ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+- exit 0 ;;
++ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+- exit 0 ;;
++ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+- exit 0 ;;
++ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+- exit 0 ;;
++ exit ;;
+ *:IRIX*:*:*)
+- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+- exit 0 ;;
+- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+- i[34]86:AIX:*:*)
++ echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`"
++ exit ;;
++ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
++ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
++ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
++ i*86:AIX:*:*)
+ echo i386-ibm-aix
+- exit 0 ;;
++ exit ;;
++ ia64:AIX:*:*)
++ if [ -x /usr/bin/oslevel ] ; then
++ IBM_REV=`/usr/bin/oslevel`
++ else
++ IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
++ fi
++ echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV"
++ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+- sed 's/^ //' << EOF >dummy.c
++ set_cc_for_build
++ sed 's/^ //' << EOF > "$dummy.c"
+ #include <sys/systemcfg.h>
+
+ main()
+@@ -182,61 +593,143 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$
+ exit(0);
+ }
+ EOF
+- ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
+- rm -f dummy.c dummy
+- echo rs6000-ibm-aix3.2.5
++ if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"`
++ then
++ echo "$SYSTEM_NAME"
++ else
++ echo rs6000-ibm-aix3.2.5
++ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+- exit 0 ;;
+- *:AIX:*:4)
+- if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
++ exit ;;
++ *:AIX:*:[4567])
++ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
++ if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+- if [ -x /usr/bin/oslevel ] ; then
+- IBM_REV=`/usr/bin/oslevel`
++ if [ -x /usr/bin/lslpp ] ; then
++ IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
++ awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
+ else
+- IBM_REV=4.${UNAME_RELEASE}
++ IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
+ fi
+- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+- exit 0 ;;
++ echo "$IBM_ARCH"-ibm-aix"$IBM_REV"
++ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+- exit 0 ;;
+- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
++ exit ;;
++ ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*)
+ echo romp-ibm-bsd4.4
+- exit 0 ;;
+- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and
+- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+- exit 0 ;; # report: romp-ibm BSD 4.3
++ exit ;;
++ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
++ echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to
++ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+- exit 0 ;;
++ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+- exit 0 ;;
++ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+- exit 0 ;;
++ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+- exit 0 ;;
+- 9000/[3478]??:HP-UX:*:*)
+- case "${UNAME_MACHINE}" in
+- 9000/31? ) HP_ARCH=m68000 ;;
+- 9000/[34]?? ) HP_ARCH=m68k ;;
+- 9000/7?? | 9000/8?[679] ) HP_ARCH=hppa1.1 ;;
+- 9000/8?? ) HP_ARCH=hppa1.0 ;;
+- esac
+- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+- exit 0 ;;
++ exit ;;
++ 9000/[34678]??:HP-UX:*:*)
++ HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
++ case "$UNAME_MACHINE" in
++ 9000/31?) HP_ARCH=m68000 ;;
++ 9000/[34]??) HP_ARCH=m68k ;;
++ 9000/[678][0-9][0-9])
++ if [ -x /usr/bin/getconf ]; then
++ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
++ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
++ case "$sc_cpu_version" in
++ 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
++ 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
++ 532) # CPU_PA_RISC2_0
++ case "$sc_kernel_bits" in
++ 32) HP_ARCH=hppa2.0n ;;
++ 64) HP_ARCH=hppa2.0w ;;
++ '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20
++ esac ;;
++ esac
++ fi
++ if [ "$HP_ARCH" = "" ]; then
++ set_cc_for_build
++ sed 's/^ //' << EOF > "$dummy.c"
++
++ #define _HPUX_SOURCE
++ #include <stdlib.h>
++ #include <unistd.h>
++
++ int main ()
++ {
++ #if defined(_SC_KERNEL_BITS)
++ long bits = sysconf(_SC_KERNEL_BITS);
++ #endif
++ long cpu = sysconf (_SC_CPU_VERSION);
++
++ switch (cpu)
++ {
++ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
++ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
++ case CPU_PA_RISC2_0:
++ #if defined(_SC_KERNEL_BITS)
++ switch (bits)
++ {
++ case 64: puts ("hppa2.0w"); break;
++ case 32: puts ("hppa2.0n"); break;
++ default: puts ("hppa2.0"); break;
++ } break;
++ #else /* !defined(_SC_KERNEL_BITS) */
++ puts ("hppa2.0"); break;
++ #endif
++ default: puts ("hppa1.0"); break;
++ }
++ exit (0);
++ }
++EOF
++ (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"`
++ test -z "$HP_ARCH" && HP_ARCH=hppa
++ fi ;;
++ esac
++ if [ "$HP_ARCH" = hppa2.0w ]
++ then
++ set_cc_for_build
++
++ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
++ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
++ # generating 64-bit code. GNU and HP use different nomenclature:
++ #
++ # $ CC_FOR_BUILD=cc ./config.guess
++ # => hppa2.0w-hp-hpux11.23
++ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
++ # => hppa64-hp-hpux11.23
++
++ if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
++ grep -q __LP64__
++ then
++ HP_ARCH=hppa2.0w
++ else
++ HP_ARCH=hppa64
++ fi
++ fi
++ echo "$HP_ARCH"-hp-hpux"$HPUX_REV"
++ exit ;;
++ ia64:HP-UX:*:*)
++ HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
++ echo ia64-hp-hpux"$HPUX_REV"
++ exit ;;
+ 3050*:HI-UX:*:*)
+- sed 's/^ //' << EOF >dummy.c
++ set_cc_for_build
++ sed 's/^ //' << EOF > "$dummy.c"
+ #include <unistd.h>
+ int
+ main ()
+@@ -261,213 +754,727 @@ EOF
+ exit (0);
+ }
+ EOF
+- ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
+- rm -f dummy.c dummy
++ $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` &&
++ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+- exit 0 ;;
+- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
++ exit ;;
++ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*)
+ echo hppa1.1-hp-bsd
+- exit 0 ;;
++ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+- exit 0 ;;
+- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
++ exit ;;
++ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
++ echo hppa1.0-hp-mpeix
++ exit ;;
++ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*)
+ echo hppa1.1-hp-osf
+- exit 0 ;;
++ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+- exit 0 ;;
++ exit ;;
++ i*86:OSF1:*:*)
++ if [ -x /usr/sbin/sysversion ] ; then
++ echo "$UNAME_MACHINE"-unknown-osf1mk
++ else
++ echo "$UNAME_MACHINE"-unknown-osf1
++ fi
++ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+- exit 0 ;;
++ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+- exit 0 ;;
++ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+- exit 0 ;;
++ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+- exit 0 ;;
++ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+- exit 0 ;;
++ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+- exit 0 ;;
+- CRAY*X-MP:*:*:*)
+- echo xmp-cray-unicos
+- exit 0 ;;
++ exit ;;
+ CRAY*Y-MP:*:*:*)
+- echo ymp-cray-unicos${UNAME_RELEASE}
+- exit 0 ;;
+- CRAY*C90:*:*:*)
+- echo c90-cray-unicos${UNAME_RELEASE}
+- exit 0 ;;
+- CRAY-2:*:*:*)
+- echo cray2-cray-unicos
+- exit 0 ;;
+- hp3[0-9][05]:NetBSD:*:*)
+- echo m68k-hp-netbsd${UNAME_RELEASE}
+- exit 0 ;;
+- i[34]86:BSD/386:*:* | *:BSD/OS:*:*)
+- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+- exit 0 ;;
++ echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ CRAY*[A-Z]90:*:*:*)
++ echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \
++ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
++ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
++ -e 's/\.[^.]*$/.X/'
++ exit ;;
++ CRAY*TS:*:*:*)
++ echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ CRAY*T3E:*:*:*)
++ echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ CRAY*SV1:*:*:*)
++ echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ *:UNICOS/mp:*:*)
++ echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
++ FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
++ FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
++ FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'`
++ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++ exit ;;
++ 5000:UNIX_System_V:4.*:*)
++ FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
++ FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
++ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++ exit ;;
++ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
++ echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE"
++ exit ;;
++ sparc*:BSD/OS:*:*)
++ echo sparc-unknown-bsdi"$UNAME_RELEASE"
++ exit ;;
++ *:BSD/OS:*:*)
++ echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE"
++ exit ;;
++ arm:FreeBSD:*:*)
++ UNAME_PROCESSOR=`uname -p`
++ set_cc_for_build
++ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
++ | grep -q __ARM_PCS_VFP
++ then
++ echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabi
++ else
++ echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabihf
++ fi
++ exit ;;
+ *:FreeBSD:*:*)
+- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+- exit 0 ;;
+- *:NetBSD:*:*)
+- echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+- exit 0 ;;
++ UNAME_PROCESSOR=`/usr/bin/uname -p`
++ case "$UNAME_PROCESSOR" in
++ amd64)
++ UNAME_PROCESSOR=x86_64 ;;
++ i386)
++ UNAME_PROCESSOR=i586 ;;
++ esac
++ echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
++ exit ;;
+ i*:CYGWIN*:*)
+- echo i386-unknown-cygwin32
+- exit 0 ;;
+- p*:CYGWIN*:*)
+- echo powerpcle-unknown-cygwin32
+- exit 0 ;;
++ echo "$UNAME_MACHINE"-pc-cygwin
++ exit ;;
++ *:MINGW64*:*)
++ echo "$UNAME_MACHINE"-pc-mingw64
++ exit ;;
++ *:MINGW*:*)
++ echo "$UNAME_MACHINE"-pc-mingw32
++ exit ;;
++ *:MSYS*:*)
++ echo "$UNAME_MACHINE"-pc-msys
++ exit ;;
++ i*:PW*:*)
++ echo "$UNAME_MACHINE"-pc-pw32
++ exit ;;
++ *:Interix*:*)
++ case "$UNAME_MACHINE" in
++ x86)
++ echo i586-pc-interix"$UNAME_RELEASE"
++ exit ;;
++ authenticamd | genuineintel | EM64T)
++ echo x86_64-unknown-interix"$UNAME_RELEASE"
++ exit ;;
++ IA64)
++ echo ia64-unknown-interix"$UNAME_RELEASE"
++ exit ;;
++ esac ;;
++ i*:UWIN*:*)
++ echo "$UNAME_MACHINE"-pc-uwin
++ exit ;;
++ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
++ echo x86_64-pc-cygwin
++ exit ;;
+ prep*:SunOS:5.*:*)
+- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
++ exit ;;
+ *:GNU:*:*)
+- echo `echo ${UNAME_MACHINE}|sed -e 's,/.*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+- exit 0 ;;
+- *:Linux:*:*)
+- # The BFD linker knows what the default object file format is, so
+- # first see if it will tell us.
+- ld_help_string=`ld --help 2>&1`
+- if echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: elf_i[345]86"; then
+- echo "${UNAME_MACHINE}-unknown-linux" ; exit 0
+- elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i[345]86linux"; then
+- echo "${UNAME_MACHINE}-unknown-linuxaout" ; exit 0
+- elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i[345]86coff"; then
+- echo "${UNAME_MACHINE}-unknown-linuxcoff" ; exit 0
+- elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68kelf"; then
+- echo "${UNAME_MACHINE}-unknown-linux" ; exit 0
+- elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68klinux"; then
+- echo "${UNAME_MACHINE}-unknown-linuxaout" ; exit 0
+- elif test "${UNAME_MACHINE}" = "alpha" ; then
+- echo alpha-unknown-linux ; exit 0
+- else
+- # Either a pre-BFD a.out linker (linuxoldld) or one that does not give us
+- # useful --help. Gcc wants to distinguish between linuxoldld and linuxaout.
+- test ! -d /usr/lib/ldscripts/. \
+- && echo "${UNAME_MACHINE}-unknown-linuxoldld" && exit 0
+- # Determine whether the default compiler is a.out or elf
+- cat >dummy.c <<EOF
+-main(argc, argv)
+-int argc;
+-char *argv[];
+-{
+-#ifdef __ELF__
+- printf ("%s-unknown-linux\n", argv[1]);
+-#else
+- printf ("%s-unknown-linuxaout\n", argv[1]);
+-#endif
+- return 0;
+-}
++ # the GNU system
++ echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`"
++ exit ;;
++ *:GNU/*:*:*)
++ # other systems with GNU libc and userland
++ echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC"
++ exit ;;
++ *:Minix:*:*)
++ echo "$UNAME_MACHINE"-unknown-minix
++ exit ;;
++ aarch64:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ aarch64_be:Linux:*:*)
++ UNAME_MACHINE=aarch64_be
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ alpha:Linux:*:*)
++ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
++ EV5) UNAME_MACHINE=alphaev5 ;;
++ EV56) UNAME_MACHINE=alphaev56 ;;
++ PCA56) UNAME_MACHINE=alphapca56 ;;
++ PCA57) UNAME_MACHINE=alphapca56 ;;
++ EV6) UNAME_MACHINE=alphaev6 ;;
++ EV67) UNAME_MACHINE=alphaev67 ;;
++ EV68*) UNAME_MACHINE=alphaev68 ;;
++ esac
++ objdump --private-headers /bin/sh | grep -q ld.so.1
++ if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ arc:Linux:*:* | arceb:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ arm*:Linux:*:*)
++ set_cc_for_build
++ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
++ | grep -q __ARM_EABI__
++ then
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ else
++ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
++ | grep -q __ARM_PCS_VFP
++ then
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi
++ else
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf
++ fi
++ fi
++ exit ;;
++ avr32*:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ cris:Linux:*:*)
++ echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
++ exit ;;
++ crisv32:Linux:*:*)
++ echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
++ exit ;;
++ e2k:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ frv:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ hexagon:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ i*86:Linux:*:*)
++ echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
++ exit ;;
++ ia64:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ k1om:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ m32r*:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ m68*:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ mips:Linux:*:* | mips64:Linux:*:*)
++ set_cc_for_build
++ IS_GLIBC=0
++ test x"${LIBC}" = xgnu && IS_GLIBC=1
++ sed 's/^ //' << EOF > "$dummy.c"
++ #undef CPU
++ #undef mips
++ #undef mipsel
++ #undef mips64
++ #undef mips64el
++ #if ${IS_GLIBC} && defined(_ABI64)
++ LIBCABI=gnuabi64
++ #else
++ #if ${IS_GLIBC} && defined(_ABIN32)
++ LIBCABI=gnuabin32
++ #else
++ LIBCABI=${LIBC}
++ #endif
++ #endif
++
++ #if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
++ CPU=mipsisa64r6
++ #else
++ #if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
++ CPU=mipsisa32r6
++ #else
++ #if defined(__mips64)
++ CPU=mips64
++ #else
++ CPU=mips
++ #endif
++ #endif
++ #endif
++
++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++ MIPS_ENDIAN=el
++ #else
++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++ MIPS_ENDIAN=
++ #else
++ MIPS_ENDIAN=
++ #endif
++ #endif
+ EOF
+- ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
+- rm -f dummy.c dummy
+- fi ;;
+-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
+-# are messed up and put the nodename in both sysname and nodename.
+- i[34]86:DYNIX/ptx:4*:*)
++ eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'`"
++ test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; }
++ ;;
++ mips64el:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ openrisc*:Linux:*:*)
++ echo or1k-unknown-linux-"$LIBC"
++ exit ;;
++ or32:Linux:*:* | or1k*:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ padre:Linux:*:*)
++ echo sparc-unknown-linux-"$LIBC"
++ exit ;;
++ parisc64:Linux:*:* | hppa64:Linux:*:*)
++ echo hppa64-unknown-linux-"$LIBC"
++ exit ;;
++ parisc:Linux:*:* | hppa:Linux:*:*)
++ # Look for CPU level
++ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
++ PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;;
++ PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;;
++ *) echo hppa-unknown-linux-"$LIBC" ;;
++ esac
++ exit ;;
++ ppc64:Linux:*:*)
++ echo powerpc64-unknown-linux-"$LIBC"
++ exit ;;
++ ppc:Linux:*:*)
++ echo powerpc-unknown-linux-"$LIBC"
++ exit ;;
++ ppc64le:Linux:*:*)
++ echo powerpc64le-unknown-linux-"$LIBC"
++ exit ;;
++ ppcle:Linux:*:*)
++ echo powerpcle-unknown-linux-"$LIBC"
++ exit ;;
++ riscv32:Linux:*:* | riscv64:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ s390:Linux:*:* | s390x:Linux:*:*)
++ echo "$UNAME_MACHINE"-ibm-linux-"$LIBC"
++ exit ;;
++ sh64*:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ sh*:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ sparc:Linux:*:* | sparc64:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ tile*:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ vax:Linux:*:*)
++ echo "$UNAME_MACHINE"-dec-linux-"$LIBC"
++ exit ;;
++ x86_64:Linux:*:*)
++ echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
++ exit ;;
++ xtensa*:Linux:*:*)
++ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
++ exit ;;
++ i*86:DYNIX/ptx:4*:*)
++ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
++ # earlier versions are messed up and put the nodename in both
++ # sysname and nodename.
+ echo i386-sequent-sysv4
+- exit 0 ;;
+- i[34]86:*:4.*:* | i[34]86:SYSTEM_V:4.*:*)
++ exit ;;
++ i*86:UNIX_SV:4.2MP:2.*)
++ # Unixware is an offshoot of SVR4, but it has its own version
++ # number series starting with 2...
++ # I am not positive that other SVR4 systems won't match this,
++ # I just have to hope. -- rms.
++ # Use sysv4.2uw... so that sysv4* matches it.
++ echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION"
++ exit ;;
++ i*86:OS/2:*:*)
++ # If we were able to find `uname', then EMX Unix compatibility
++ # is probably installed.
++ echo "$UNAME_MACHINE"-pc-os2-emx
++ exit ;;
++ i*86:XTS-300:*:STOP)
++ echo "$UNAME_MACHINE"-unknown-stop
++ exit ;;
++ i*86:atheos:*:*)
++ echo "$UNAME_MACHINE"-unknown-atheos
++ exit ;;
++ i*86:syllable:*:*)
++ echo "$UNAME_MACHINE"-pc-syllable
++ exit ;;
++ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
++ echo i386-unknown-lynxos"$UNAME_RELEASE"
++ exit ;;
++ i*86:*DOS:*:*)
++ echo "$UNAME_MACHINE"-pc-msdosdjgpp
++ exit ;;
++ i*86:*:4.*:*)
++ UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+- echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
++ echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL"
+ else
+- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}
++ echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL"
+ fi
+- exit 0 ;;
+- i[34]86:*:3.2:*)
++ exit ;;
++ i*86:*:5:[678]*)
++ # UnixWare 7.x, OpenUNIX and OpenServer 6.
++ case `/bin/uname -X | grep "^Machine"` in
++ *486*) UNAME_MACHINE=i486 ;;
++ *Pentium) UNAME_MACHINE=i586 ;;
++ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
++ esac
++ echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}"
++ exit ;;
++ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+- echo ${UNAME_MACHINE}-unknown-isc$UNAME_REL
++ echo "$UNAME_MACHINE"-pc-isc"$UNAME_REL"
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
++ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
++ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
++ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+- echo ${UNAME_MACHINE}-unknown-sco$UNAME_REL
++ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
++ && UNAME_MACHINE=i686
++ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
++ && UNAME_MACHINE=i686
++ echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL"
+ else
+- echo ${UNAME_MACHINE}-unknown-sysv32
++ echo "$UNAME_MACHINE"-pc-sysv32
+ fi
+- exit 0 ;;
++ exit ;;
++ pc:*:*:*)
++ # Left here for compatibility:
++ # uname -m prints for DJGPP always 'pc', but it prints nothing about
++ # the processor, so we play safe by assuming i586.
++ # Note: whatever this is, it MUST be the same as what config.sub
++ # prints for the "djgpp" host, or else GDB configure will decide that
++ # this is a cross-build.
++ echo i586-pc-msdosdjgpp
++ exit ;;
+ Intel:Mach:3*:*)
+- echo i386-unknown-mach3
+- exit 0 ;;
++ echo i386-pc-mach3
++ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+- exit 0 ;;
++ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
++ echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
++ echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4
+ fi
+- exit 0 ;;
++ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+- exit 0 ;;
+- M680[234]0:*:R3V[567]*:*)
+- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+- 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0)
+- uname -p 2>/dev/null | grep 86 >/dev/null \
+- && echo i486-ncr-sysv4.3 && exit 0 ;;
++ exit ;;
++ mc68k:UNIX:SYSTEM5:3.51m)
++ echo m68k-convergent-sysv
++ exit ;;
++ M680?0:D-NIX:5.3:*)
++ echo m68k-diab-dnix
++ exit ;;
++ M68*:*:R3V[5678]*:*)
++ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
++ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
++ OS_REL=''
++ test -r /etc/.relid \
++ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
++ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
++ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+- uname -p 2>/dev/null | grep 86 >/dev/null \
+- && echo i486-ncr-sysv4 && exit 0 ;;
+- m680[234]0:LynxOS:2.[23]*:*)
+- echo m68k-lynx-lynxos${UNAME_RELEASE}
+- exit 0 ;;
++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++ && { echo i486-ncr-sysv4; exit; } ;;
++ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
++ OS_REL='.3'
++ test -r /etc/.relid \
++ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
++ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
++ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; }
++ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
++ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
++ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
++ echo m68k-unknown-lynxos"$UNAME_RELEASE"
++ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+- exit 0 ;;
+- i[34]86:LynxOS:2.[23]*:*)
+- echo i386-lynx-lynxos${UNAME_RELEASE}
+- exit 0 ;;
+- TSUNAMI:LynxOS:2.[23]*:*)
+- echo sparc-lynx-lynxos${UNAME_RELEASE}
+- exit 0 ;;
+- rs6000:LynxOS:2.[23]*:*)
+- echo rs6000-lynx-lynxos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
++ TSUNAMI:LynxOS:2.*:*)
++ echo sparc-unknown-lynxos"$UNAME_RELEASE"
++ exit ;;
++ rs6000:LynxOS:2.*:*)
++ echo rs6000-unknown-lynxos"$UNAME_RELEASE"
++ exit ;;
++ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
++ echo powerpc-unknown-lynxos"$UNAME_RELEASE"
++ exit ;;
++ SM[BE]S:UNIX_SV:*:*)
++ echo mips-dde-sysv"$UNAME_RELEASE"
++ exit ;;
++ RM*:ReliantUNIX-*:*:*)
++ echo mips-sni-sysv4
++ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+- exit 0 ;;
++ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+- echo ${UNAME_MACHINE}-sni-sysv4
++ echo "$UNAME_MACHINE"-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+- exit 0 ;;
++ exit ;;
++ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
++ # says <Richard.M.Bartel@ccMail.Census.GOV>
++ echo i586-unisys-sysv4
++ exit ;;
++ *:UNIX_System_V:4*:FTX*)
++ # From Gerald Hewes <hewes@openmarket.com>.
++ # How about differentiating between stratus architectures? -djm
++ echo hppa1.1-stratus-sysv4
++ exit ;;
++ *:*:*:FTX*)
++ # From seanf@swdc.stratus.com.
++ echo i860-stratus-sysv4
++ exit ;;
++ i*86:VOS:*:*)
++ # From Paul.Green@stratus.com.
++ echo "$UNAME_MACHINE"-stratus-vos
++ exit ;;
++ *:VOS:*:*)
++ # From Paul.Green@stratus.com.
++ echo hppa1.1-stratus-vos
++ exit ;;
+ mc68*:A/UX:*:*)
+- echo m68k-apple-aux${UNAME_RELEASE}
+- exit 0 ;;
+- R3000:*System_V*:*:*)
++ echo m68k-apple-aux"$UNAME_RELEASE"
++ exit ;;
++ news*:NEWS-OS:6*:*)
++ echo mips-sony-newsos6
++ exit ;;
++ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+- echo mips-nec-sysv${UNAME_RELEASE}
++ echo mips-nec-sysv"$UNAME_RELEASE"
+ else
+- echo mips-unknown-sysv${UNAME_RELEASE}
++ echo mips-unknown-sysv"$UNAME_RELEASE"
++ fi
++ exit ;;
++ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
++ echo powerpc-be-beos
++ exit ;;
++ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
++ echo powerpc-apple-beos
++ exit ;;
++ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
++ echo i586-pc-beos
++ exit ;;
++ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
++ echo i586-pc-haiku
++ exit ;;
++ x86_64:Haiku:*:*)
++ echo x86_64-unknown-haiku
++ exit ;;
++ SX-4:SUPER-UX:*:*)
++ echo sx4-nec-superux"$UNAME_RELEASE"
++ exit ;;
++ SX-5:SUPER-UX:*:*)
++ echo sx5-nec-superux"$UNAME_RELEASE"
++ exit ;;
++ SX-6:SUPER-UX:*:*)
++ echo sx6-nec-superux"$UNAME_RELEASE"
++ exit ;;
++ SX-7:SUPER-UX:*:*)
++ echo sx7-nec-superux"$UNAME_RELEASE"
++ exit ;;
++ SX-8:SUPER-UX:*:*)
++ echo sx8-nec-superux"$UNAME_RELEASE"
++ exit ;;
++ SX-8R:SUPER-UX:*:*)
++ echo sx8r-nec-superux"$UNAME_RELEASE"
++ exit ;;
++ SX-ACE:SUPER-UX:*:*)
++ echo sxace-nec-superux"$UNAME_RELEASE"
++ exit ;;
++ Power*:Rhapsody:*:*)
++ echo powerpc-apple-rhapsody"$UNAME_RELEASE"
++ exit ;;
++ *:Rhapsody:*:*)
++ echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE"
++ exit ;;
++ *:Darwin:*:*)
++ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
++ set_cc_for_build
++ if test "$UNAME_PROCESSOR" = unknown ; then
++ UNAME_PROCESSOR=powerpc
+ fi
+- exit 0 ;;
++ if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then
++ if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
++ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
++ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
++ grep IS_64BIT_ARCH >/dev/null
++ then
++ case $UNAME_PROCESSOR in
++ i386) UNAME_PROCESSOR=x86_64 ;;
++ powerpc) UNAME_PROCESSOR=powerpc64 ;;
++ esac
++ fi
++ # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
++ if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
++ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
++ grep IS_PPC >/dev/null
++ then
++ UNAME_PROCESSOR=powerpc
++ fi
++ fi
++ elif test "$UNAME_PROCESSOR" = i386 ; then
++ # Avoid executing cc on OS X 10.9, as it ships with a stub
++ # that puts up a graphical alert prompting to install
++ # developer tools. Any system running Mac OS X 10.7 or
++ # later (Darwin 11 and later) is required to have a 64-bit
++ # processor. This is not true of the ARM version of Darwin
++ # that Apple uses in portable devices.
++ UNAME_PROCESSOR=x86_64
++ fi
++ echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE"
++ exit ;;
++ *:procnto*:*:* | *:QNX:[0123456789]*:*)
++ UNAME_PROCESSOR=`uname -p`
++ if test "$UNAME_PROCESSOR" = x86; then
++ UNAME_PROCESSOR=i386
++ UNAME_MACHINE=pc
++ fi
++ echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE"
++ exit ;;
++ *:QNX:*:4*)
++ echo i386-pc-qnx
++ exit ;;
++ NEO-*:NONSTOP_KERNEL:*:*)
++ echo neo-tandem-nsk"$UNAME_RELEASE"
++ exit ;;
++ NSE-*:NONSTOP_KERNEL:*:*)
++ echo nse-tandem-nsk"$UNAME_RELEASE"
++ exit ;;
++ NSR-*:NONSTOP_KERNEL:*:*)
++ echo nsr-tandem-nsk"$UNAME_RELEASE"
++ exit ;;
++ NSV-*:NONSTOP_KERNEL:*:*)
++ echo nsv-tandem-nsk"$UNAME_RELEASE"
++ exit ;;
++ NSX-*:NONSTOP_KERNEL:*:*)
++ echo nsx-tandem-nsk"$UNAME_RELEASE"
++ exit ;;
++ *:NonStop-UX:*:*)
++ echo mips-compaq-nonstopux
++ exit ;;
++ BS2000:POSIX*:*:*)
++ echo bs2000-siemens-sysv
++ exit ;;
++ DS/*:UNIX_System_V:*:*)
++ echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE"
++ exit ;;
++ *:Plan9:*:*)
++ # "uname -m" is not consistent, so use $cputype instead. 386
++ # is converted to i386 for consistency with other x86
++ # operating systems.
++ # shellcheck disable=SC2154
++ if test "$cputype" = 386; then
++ UNAME_MACHINE=i386
++ else
++ UNAME_MACHINE="$cputype"
++ fi
++ echo "$UNAME_MACHINE"-unknown-plan9
++ exit ;;
++ *:TOPS-10:*:*)
++ echo pdp10-unknown-tops10
++ exit ;;
++ *:TENEX:*:*)
++ echo pdp10-unknown-tenex
++ exit ;;
++ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
++ echo pdp10-dec-tops20
++ exit ;;
++ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
++ echo pdp10-xkl-tops20
++ exit ;;
++ *:TOPS-20:*:*)
++ echo pdp10-unknown-tops20
++ exit ;;
++ *:ITS:*:*)
++ echo pdp10-unknown-its
++ exit ;;
++ SEI:*:*:SEIUX)
++ echo mips-sei-seiux"$UNAME_RELEASE"
++ exit ;;
++ *:DragonFly:*:*)
++ echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
++ exit ;;
++ *:*VMS:*:*)
++ UNAME_MACHINE=`(uname -p) 2>/dev/null`
++ case "$UNAME_MACHINE" in
++ A*) echo alpha-dec-vms ; exit ;;
++ I*) echo ia64-dec-vms ; exit ;;
++ V*) echo vax-dec-vms ; exit ;;
++ esac ;;
++ *:XENIX:*:SysV)
++ echo i386-pc-xenix
++ exit ;;
++ i*86:skyos:*:*)
++ echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`"
++ exit ;;
++ i*86:rdos:*:*)
++ echo "$UNAME_MACHINE"-pc-rdos
++ exit ;;
++ i*86:AROS:*:*)
++ echo "$UNAME_MACHINE"-pc-aros
++ exit ;;
++ x86_64:VMkernel:*:*)
++ echo "$UNAME_MACHINE"-unknown-esx
++ exit ;;
++ amd64:Isilon\ OneFS:*:*)
++ echo x86_64-unknown-onefs
++ exit ;;
++ *:Unleashed:*:*)
++ echo "$UNAME_MACHINE"-unknown-unleashed"$UNAME_RELEASE"
++ exit ;;
+ esac
+
+-#echo '(No uname command or uname output not recognized.)' 1>&2
+-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+-
+-cat >dummy.c <<EOF
++# No uname command or uname output not recognized.
++set_cc_for_build
++cat > "$dummy.c" <<EOF
+ #ifdef _SEQUENT_
+-# include <sys/types.h>
+-# include <sys/utsname.h>
++#include <sys/types.h>
++#include <sys/utsname.h>
++#endif
++#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
++#if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
++#include <signal.h>
++#if defined(_SIZE_T_) || defined(SIGLOST)
++#include <sys/utsname.h>
++#endif
++#endif
+ #endif
+ main ()
+ {
+@@ -480,20 +1487,12 @@ main ()
+ #include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+ #ifdef NEWSOS4
+- "4"
++ "4"
+ #else
+- ""
+-#endif
+- ); exit (0);
++ ""
+ #endif
++ ); exit (0);
+ #endif
+-
+-#if defined (__arm) && defined (__acorn) && defined (__unix)
+- printf ("arm-acorn-riscix"); exit (0);
+-#endif
+-
+-#if defined (hp300) && !defined (hpux)
+- printf ("m68k-hp-bsd\n"); exit (0);
+ #endif
+
+ #if defined (NeXT)
+@@ -502,7 +1501,10 @@ main ()
+ #endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+- printf ("%s-next-nextstep%s\n", __ARCHITECTURE__, version==2 ? "2" : "3");
++ if (version < 4)
++ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
++ else
++ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+ #endif
+
+@@ -519,7 +1521,7 @@ main ()
+ #endif
+
+ #if defined (__386BSD__)
+- printf ("i386-unknown-bsd\n"); exit (0);
++ printf ("i386-pc-bsd\n"); exit (0);
+ #endif
+
+ #if defined (sequent)
+@@ -532,27 +1534,55 @@ main ()
+ #endif
+
+ #if defined (_SEQUENT_)
+- struct utsname un;
+-
+- uname(&un);
+-
+- if (strncmp(un.version, "V2", 2) == 0) {
+- printf ("i386-sequent-ptx2\n"); exit (0);
+- }
+- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+- printf ("i386-sequent-ptx1\n"); exit (0);
+- }
+- printf ("i386-sequent-ptx\n"); exit (0);
++ struct utsname un;
+
++ uname(&un);
++ if (strncmp(un.version, "V2", 2) == 0) {
++ printf ("i386-sequent-ptx2\n"); exit (0);
++ }
++ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
++ printf ("i386-sequent-ptx1\n"); exit (0);
++ }
++ printf ("i386-sequent-ptx\n"); exit (0);
+ #endif
+
+ #if defined (vax)
+ #if !defined (ultrix)
++#include <sys/param.h>
++#if defined (BSD)
++#if BSD == 43
++ printf ("vax-dec-bsd4.3\n"); exit (0);
++#else
++#if BSD == 199006
++ printf ("vax-dec-bsd4.3reno\n"); exit (0);
++#else
++ printf ("vax-dec-bsd\n"); exit (0);
++#endif
++#endif
++#else
+ printf ("vax-dec-bsd\n"); exit (0);
++#endif
++#else
++#if defined(_SIZE_T_) || defined(SIGLOST)
++ struct utsname un;
++ uname (&un);
++ printf ("vax-dec-ultrix%s\n", un.release); exit (0);
+ #else
+ printf ("vax-dec-ultrix\n"); exit (0);
+ #endif
+ #endif
++#endif
++#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
++#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
++#if defined(_SIZE_T_) || defined(SIGLOST)
++ struct utsname *un;
++ uname (&un);
++ printf ("mips-dec-ultrix%s\n", un.release); exit (0);
++#else
++ printf ("mips-dec-ultrix\n"); exit (0);
++#endif
++#endif
++#endif
+
+ #if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+@@ -562,39 +1592,67 @@ main ()
+ }
+ EOF
+
+-${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
+-rm -f dummy.c dummy
++$CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=`$dummy` &&
++ { echo "$SYSTEM_NAME"; exit; }
+
+ # Apollos put the system type in the environment.
++test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; }
+
+-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
++echo "$0: unable to guess system type" >&2
+
+-# Convex versions that predate uname can use getsysinfo(1)
++case "$UNAME_MACHINE:$UNAME_SYSTEM" in
++ mips:Linux | mips64:Linux)
++ # If we got here on MIPS GNU/Linux, output extra information.
++ cat >&2 <<EOF
+
+-if [ -x /usr/convex/getsysinfo ]
+-then
+- case `getsysinfo -f cpu_type` in
+- c1*)
+- echo c1-convex-bsd
+- exit 0 ;;
+- c2*)
+- if getsysinfo -f scalar_acc
+- then echo c32-convex-bsd
+- else echo c2-convex-bsd
+- fi
+- exit 0 ;;
+- c34*)
+- echo c34-convex-bsd
+- exit 0 ;;
+- c38*)
+- echo c38-convex-bsd
+- exit 0 ;;
+- c4*)
+- echo c4-convex-bsd
+- exit 0 ;;
+- esac
+-fi
++NOTE: MIPS GNU/Linux systems require a C compiler to fully recognize
++the system type. Please install a C compiler and try again.
++EOF
++ ;;
++esac
+
+-#echo '(Unable to guess system type)' 1>&2
++cat >&2 <<EOF
++
++This script (version $timestamp), has failed to recognize the
++operating system you are using. If your script is old, overwrite *all*
++copies of config.guess and config.sub with the latest versions from:
++
++ https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
++and
++ https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
++
++If $0 has already been updated, send the following data and any
++information you think might be pertinent to config-patches@gnu.org to
++provide the necessary information to handle your system.
++
++config.guess timestamp = $timestamp
++
++uname -m = `(uname -m) 2>/dev/null || echo unknown`
++uname -r = `(uname -r) 2>/dev/null || echo unknown`
++uname -s = `(uname -s) 2>/dev/null || echo unknown`
++uname -v = `(uname -v) 2>/dev/null || echo unknown`
++
++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
++/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
++
++hostinfo = `(hostinfo) 2>/dev/null`
++/bin/universe = `(/bin/universe) 2>/dev/null`
++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
++/bin/arch = `(/bin/arch) 2>/dev/null`
++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
++
++UNAME_MACHINE = "$UNAME_MACHINE"
++UNAME_RELEASE = "$UNAME_RELEASE"
++UNAME_SYSTEM = "$UNAME_SYSTEM"
++UNAME_VERSION = "$UNAME_VERSION"
++EOF
+
+ exit 1
++
++# Local variables:
++# eval: (add-hook 'before-save-hook 'time-stamp)
++# time-stamp-start: "timestamp='"
++# time-stamp-format: "%:y-%02m-%02d"
++# time-stamp-end: "'"
++# End:
+diff -uprN clean/lrzsz-0.12.20/config.h.in lrzsz-0.12.20/config.h.in
+--- clean/lrzsz-0.12.20/config.h.in 1998-12-30 00:37:27.000000000 +0000
++++ lrzsz-0.12.20/config.h.in 2019-11-26 11:37:45.000000000 +0000
+@@ -1,82 +1,4 @@
+-/* config.h.in. Generated automatically from configure.in by autoheader. */
+-
+-/* Define if on AIX 3.
+- System headers sometimes define this.
+- We just want to avoid a redefinition error message. */
+-#ifndef _ALL_SOURCE
+-#undef _ALL_SOURCE
+-#endif
+-
+-/* Define if using alloca.c. */
+-#undef C_ALLOCA
+-
+-/* Define to empty if the keyword does not work. */
+-#undef const
+-
+-/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
+- This function is required for alloca.c support on those systems. */
+-#undef CRAY_STACKSEG_END
+-
+-/* Define if you have alloca, as a function or macro. */
+-#undef HAVE_ALLOCA
+-
+-/* Define if you have <alloca.h> and it should be used (not on Ultrix). */
+-#undef HAVE_ALLOCA_H
+-
+-/* Define if you have a working `mmap' system call. */
+-#undef HAVE_MMAP
+-
+-/* Define if your struct stat has st_rdev. */
+-#undef HAVE_ST_RDEV
+-
+-/* Define as __inline if that's what the C compiler calls it. */
+-#undef inline
+-
+-/* Define if on MINIX. */
+-#undef _MINIX
+-
+-/* Define to `int' if <sys/types.h> doesn't define. */
+-#undef mode_t
+-
+-/* Define to `long' if <sys/types.h> doesn't define. */
+-#undef off_t
+-
+-/* Define if the system does not provide POSIX.1 features except
+- with this defined. */
+-#undef _POSIX_1_SOURCE
+-
+-/* Define if you need to in order for stat and other things to work. */
+-#undef _POSIX_SOURCE
+-
+-/* Define as the return type of signal handlers (int or void). */
+-#undef RETSIGTYPE
+-
+-/* Define if the setvbuf function takes the buffering type as its second
+- argument and the buffer pointer as the third, as on System V
+- before release 3. */
+-#undef SETVBUF_REVERSED
+-
+-/* Define to `unsigned' if <sys/types.h> doesn't define. */
+-#undef size_t
+-
+-/* If using the C implementation of alloca, define if you know the
+- direction of stack growth for your system; otherwise it will be
+- automatically deduced at run-time.
+- STACK_DIRECTION > 0 => grows toward higher addresses
+- STACK_DIRECTION < 0 => grows toward lower addresses
+- STACK_DIRECTION = 0 => direction of growth unknown
+- */
+-#undef STACK_DIRECTION
+-
+-/* Define if you have the ANSI C header files. */
+-#undef STDC_HEADERS
+-
+-/* Define if you can safely include both <sys/time.h> and <time.h>. */
+-#undef TIME_WITH_SYS_TIME
+-
+-/* Define if your <sys/time.h> declares struct tm. */
+-#undef TM_IN_SYS_TIME
+-
++/* config.h.in. Generated from configure.in by autoheader. */
+ /* define this if you have a reliable ftime function */
+ #undef HAVE_FTIME
+
+@@ -150,188 +72,303 @@
+ /* define this if you headers conflict */
+ #undef SYS_TIME_WITHOUT_SYS_SELECT
+
+-/* Define if you have the __argz_count function. */
+-#undef HAVE___ARGZ_COUNT
++/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
++ systems. This function is required for `alloca.c' support on those systems.
++ */
++#undef CRAY_STACKSEG_END
+
+-/* Define if you have the __argz_next function. */
+-#undef HAVE___ARGZ_NEXT
++/* Define to 1 if using `alloca.c'. */
++#undef C_ALLOCA
+
+-/* Define if you have the __argz_stringify function. */
+-#undef HAVE___ARGZ_STRINGIFY
++/* Define to 1 if translation of program messages to the user's native
++ language is requested. */
++#undef ENABLE_NLS
+
+-/* Define if you have the dcgettext function. */
++/* Define to 1 if you have `alloca', as a function or macro. */
++#undef HAVE_ALLOCA
++
++/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
++ */
++#undef HAVE_ALLOCA_H
++
++/* Define to 1 if you have the <arpa/inet.h> header file. */
++#undef HAVE_ARPA_INET_H
++
++/* Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the
++ CoreFoundation framework. */
++#undef HAVE_CFLOCALECOPYCURRENT
++
++/* Define to 1 if you have the Mac OS X function
++ CFLocaleCopyPreferredLanguages in the CoreFoundation framework. */
++#undef HAVE_CFLOCALECOPYPREFERREDLANGUAGES
++
++/* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in
++ the CoreFoundation framework. */
++#undef HAVE_CFPREFERENCESCOPYAPPVALUE
++
++/* Define if the GNU dcgettext() function is already present or preinstalled.
++ */
+ #undef HAVE_DCGETTEXT
+
+-/* Define if you have the getcwd function. */
+-#undef HAVE_GETCWD
++/* Define to 1 if you have the <fcntl.h> header file. */
++#undef HAVE_FCNTL_H
+
+-/* Define if you have the getpagesize function. */
++/* Define to 1 if you have the `getpagesize' function. */
+ #undef HAVE_GETPAGESIZE
+
+-/* Define if you have the gettimeofday function. */
++/* Define if the GNU gettext() function is already present or preinstalled. */
++#undef HAVE_GETTEXT
++
++/* Define to 1 if you have the `gettimeofday' function. */
+ #undef HAVE_GETTIMEOFDAY
+
+-/* Define if you have the memcpy function. */
++/* Define if you have the iconv() function and it works. */
++#undef HAVE_ICONV
++
++/* Define to 1 if you have the <inttypes.h> header file. */
++#undef HAVE_INTTYPES_H
++
++/* Define to 1 if you have the `be' library (-lbe). */
++#undef HAVE_LIBBE
++
++/* Define to 1 if you have the `nsl' library (-lnsl). */
++#undef HAVE_LIBNSL
++
++/* Define to 1 if you have the `socket' library (-lsocket). */
++#undef HAVE_LIBSOCKET
++
++/* Define to 1 if you have the <limits.h> header file. */
++#undef HAVE_LIMITS_H
++
++/* Define to 1 if you have the `memcpy' function. */
+ #undef HAVE_MEMCPY
+
+-/* Define if you have the mkdir function. */
++/* Define to 1 if you have the <memory.h> header file. */
++#undef HAVE_MEMORY_H
++
++/* Define to 1 if you have the `mkdir' function. */
+ #undef HAVE_MKDIR
+
+-/* Define if you have the mktime function. */
++/* Define to 1 if you have the `mktime' function. */
+ #undef HAVE_MKTIME
+
+-/* Define if you have the munmap function. */
+-#undef HAVE_MUNMAP
+-
+-/* Define if you have the putenv function. */
+-#undef HAVE_PUTENV
++/* Define to 1 if you have a working `mmap' system call. */
++#undef HAVE_MMAP
+
+-/* Define if you have the rdchk function. */
++/* Define to 1 if you have the `rdchk' function. */
+ #undef HAVE_RDCHK
+
+-/* Define if you have the select function. */
++/* Define to 1 if you have the `select' function. */
+ #undef HAVE_SELECT
+
+-/* Define if you have the setenv function. */
+-#undef HAVE_SETENV
+-
+-/* Define if you have the setlocale function. */
+-#undef HAVE_SETLOCALE
+-
+-/* Define if you have the settimeofday function. */
++/* Define to 1 if you have the `settimeofday' function. */
+ #undef HAVE_SETTIMEOFDAY
+
+-/* Define if you have the siginterrupt function. */
++/* Define to 1 if you have the <sgtty.h> header file. */
++#undef HAVE_SGTTY_H
++
++/* Define to 1 if you have the `siginterrupt' function. */
+ #undef HAVE_SIGINTERRUPT
+
+-/* Define if you have the stpcpy function. */
+-#undef HAVE_STPCPY
++/* Define to 1 if you have the <stdint.h> header file. */
++#undef HAVE_STDINT_H
+
+-/* Define if you have the strcasecmp function. */
+-#undef HAVE_STRCASECMP
++/* Define to 1 if you have the <stdlib.h> header file. */
++#undef HAVE_STDLIB_H
++
++/* Define to 1 if you have the `stpcpy' function. */
++#undef HAVE_STPCPY
+
+-/* Define if you have the strchr function. */
++/* Define to 1 if you have the `strchr' function. */
+ #undef HAVE_STRCHR
+
+-/* Define if you have the strdup function. */
++/* Define to 1 if you have the `strdup' function. */
+ #undef HAVE_STRDUP
+
+-/* Define if you have the strerror function. */
++/* Define to 1 if you have the `strerror' function. */
+ #undef HAVE_STRERROR
+
+-/* Define if you have the strftime function. */
++/* Define to 1 if you have the `strftime' function. */
+ #undef HAVE_STRFTIME
+
+-/* Define if you have the strpbrk function. */
++/* Define to 1 if you have the <strings.h> header file. */
++#undef HAVE_STRINGS_H
++
++/* Define to 1 if you have the <string.h> header file. */
++#undef HAVE_STRING_H
++
++/* Define to 1 if you have the `strpbrk' function. */
+ #undef HAVE_STRPBRK
+
+-/* Define if you have the strstr function. */
++/* Define to 1 if you have the `strstr' function. */
+ #undef HAVE_STRSTR
+
+-/* Define if you have the strtol function. */
++/* Define to 1 if you have the `strtol' function. */
+ #undef HAVE_STRTOL
+
+-/* Define if you have the strtoul function. */
++/* Define to 1 if you have the `strtoul' function. */
+ #undef HAVE_STRTOUL
+
+-/* Define if you have the syslog function. */
++/* Define to 1 if `st_rdev' is a member of `struct stat'. */
++#undef HAVE_STRUCT_STAT_ST_RDEV
++
++/* Define to 1 if your `struct stat' has `st_rdev'. Deprecated, use
++ `HAVE_STRUCT_STAT_ST_RDEV' instead. */
++#undef HAVE_ST_RDEV
++
++/* Define to 1 if you have the `syslog' function. */
+ #undef HAVE_SYSLOG
+
+-/* Define if you have the times function. */
+-#undef HAVE_TIMES
++/* Define to 1 if you have the <syslog.h> header file. */
++#undef HAVE_SYSLOG_H
+
+-/* Define if you have the utime function. */
+-#undef HAVE_UTIME
++/* Define to 1 if you have the <sys/ioctl.h> header file. */
++#undef HAVE_SYS_IOCTL_H
+
+-/* Define if you have the vasprintf function. */
+-#undef HAVE_VASPRINTF
++/* Define to 1 if you have the <sys/mman.h> header file. */
++#undef HAVE_SYS_MMAN_H
+
+-/* Define if you have the vprintf function. */
+-#undef HAVE_VPRINTF
++/* Define to 1 if you have the <sys/param.h> header file. */
++#undef HAVE_SYS_PARAM_H
+
+-/* Define if you have the <argz.h> header file. */
+-#undef HAVE_ARGZ_H
++/* Define to 1 if you have the <sys/select.h> header file. */
++#undef HAVE_SYS_SELECT_H
+
+-/* Define if you have the <arpa/inet.h> header file. */
+-#undef HAVE_ARPA_INET_H
++/* Define to 1 if you have the <sys/stat.h> header file. */
++#undef HAVE_SYS_STAT_H
+
+-/* Define if you have the <fcntl.h> header file. */
+-#undef HAVE_FCNTL_H
++/* Define to 1 if you have the <sys/syslog.h> header file. */
++#undef HAVE_SYS_SYSLOG_H
+
+-/* Define if you have the <limits.h> header file. */
+-#undef HAVE_LIMITS_H
++/* Define to 1 if you have the <sys/termios.h> header file. */
++#undef HAVE_SYS_TERMIOS_H
+
+-/* Define if you have the <locale.h> header file. */
+-#undef HAVE_LOCALE_H
++/* Define to 1 if you have the <sys/termio.h> header file. */
++#undef HAVE_SYS_TERMIO_H
+
+-/* Define if you have the <malloc.h> header file. */
+-#undef HAVE_MALLOC_H
++/* Define to 1 if you have the <sys/times.h> header file. */
++#undef HAVE_SYS_TIMES_H
+
+-/* Define if you have the <nl_types.h> header file. */
+-#undef HAVE_NL_TYPES_H
++/* Define to 1 if you have the <sys/time.h> header file. */
++#undef HAVE_SYS_TIME_H
+
+-/* Define if you have the <sgtty.h> header file. */
+-#undef HAVE_SGTTY_H
++/* Define to 1 if you have the <sys/types.h> header file. */
++#undef HAVE_SYS_TYPES_H
+
+-/* Define if you have the <string.h> header file. */
+-#undef HAVE_STRING_H
++/* Define to 1 if you have the <termios.h> header file. */
++#undef HAVE_TERMIOS_H
+
+-/* Define if you have the <strings.h> header file. */
+-#undef HAVE_STRINGS_H
++/* Define to 1 if you have the <termio.h> header file. */
++#undef HAVE_TERMIO_H
+
+-/* Define if you have the <sys/ioctl.h> header file. */
+-#undef HAVE_SYS_IOCTL_H
++/* Define to 1 if you have the `times' function. */
++#undef HAVE_TIMES
+
+-/* Define if you have the <sys/mman.h> header file. */
+-#undef HAVE_SYS_MMAN_H
++/* Define to 1 if you have the <unistd.h> header file. */
++#undef HAVE_UNISTD_H
+
+-/* Define if you have the <sys/param.h> header file. */
+-#undef HAVE_SYS_PARAM_H
++/* Define to 1 if you have the `utime' function. */
++#undef HAVE_UTIME
+
+-/* Define if you have the <sys/select.h> header file. */
+-#undef HAVE_SYS_SELECT_H
++/* Define to 1 if you have the <utime.h> header file. */
++#undef HAVE_UTIME_H
+
+-/* Define if you have the <sys/syslog.h> header file. */
+-#undef HAVE_SYS_SYSLOG_H
++/* Define to 1 if you have the `vasprintf' function. */
++#undef HAVE_VASPRINTF
+
+-/* Define if you have the <sys/termio.h> header file. */
+-#undef HAVE_SYS_TERMIO_H
++/* Define to 1 if you have the `vprintf' function. */
++#undef HAVE_VPRINTF
+
+-/* Define if you have the <sys/termios.h> header file. */
+-#undef HAVE_SYS_TERMIOS_H
++/* Name of package */
++#undef PACKAGE
+
+-/* Define if you have the <sys/time.h> header file. */
+-#undef HAVE_SYS_TIME_H
++/* Define to the address where bug reports for this package should be sent. */
++#undef PACKAGE_BUGREPORT
+
+-/* Define if you have the <sys/times.h> header file. */
+-#undef HAVE_SYS_TIMES_H
++/* Define to the full name of this package. */
++#undef PACKAGE_NAME
+
+-/* Define if you have the <syslog.h> header file. */
+-#undef HAVE_SYSLOG_H
++/* Define to the full name and version of this package. */
++#undef PACKAGE_STRING
+
+-/* Define if you have the <termio.h> header file. */
+-#undef HAVE_TERMIO_H
++/* Define to the one symbol short name of this package. */
++#undef PACKAGE_TARNAME
+
+-/* Define if you have the <termios.h> header file. */
+-#undef HAVE_TERMIOS_H
++/* Define to the home page for this package. */
++#undef PACKAGE_URL
+
+-/* Define if you have the <unistd.h> header file. */
+-#undef HAVE_UNISTD_H
++/* Define to the version of this package. */
++#undef PACKAGE_VERSION
+
+-/* Define if you have the <utime.h> header file. */
+-#undef HAVE_UTIME_H
++/* Define as the return type of signal handlers (`int' or `void'). */
++#undef RETSIGTYPE
+
+-/* Define if you have the <values.h> header file. */
+-#undef HAVE_VALUES_H
++/* If using the C implementation of alloca, define if you know the
++ direction of stack growth for your system; otherwise it will be
++ automatically deduced at runtime.
++ STACK_DIRECTION > 0 => grows toward higher addresses
++ STACK_DIRECTION < 0 => grows toward lower addresses
++ STACK_DIRECTION = 0 => direction of growth unknown */
++#undef STACK_DIRECTION
+
+-/* Define if you have the be library (-lbe). */
+-#undef HAVE_LIBBE
++/* Define to 1 if you have the ANSI C header files. */
++#undef STDC_HEADERS
+
+-/* Define if you have the i library (-li). */
+-#undef HAVE_LIBI
++/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
++#undef TIME_WITH_SYS_TIME
+
+-/* Define if you have the nsl library (-lnsl). */
+-#undef HAVE_LIBNSL
++/* Define to 1 if your <sys/time.h> declares `struct tm'. */
++#undef TM_IN_SYS_TIME
+
+-/* Define if you have the socket library (-lsocket). */
+-#undef HAVE_LIBSOCKET
++/* Enable extensions on AIX 3, Interix. */
++#ifndef _ALL_SOURCE
++# undef _ALL_SOURCE
++#endif
++/* Enable GNU extensions on systems that have them. */
++#ifndef _GNU_SOURCE
++# undef _GNU_SOURCE
++#endif
++/* Enable threading extensions on Solaris. */
++#ifndef _POSIX_PTHREAD_SEMANTICS
++# undef _POSIX_PTHREAD_SEMANTICS
++#endif
++/* Enable extensions on HP NonStop. */
++#ifndef _TANDEM_SOURCE
++# undef _TANDEM_SOURCE
++#endif
++/* Enable general extensions on Solaris. */
++#ifndef __EXTENSIONS__
++# undef __EXTENSIONS__
++#endif
++
++
++/* Version number of package */
++#undef VERSION
++
++/* Define to 1 if on MINIX. */
++#undef _MINIX
++
++/* Define to 2 if the system does not provide POSIX.1 features except with
++ this defined. */
++#undef _POSIX_1_SOURCE
++
++/* Define to 1 if you need to in order for `stat' and other things to work. */
++#undef _POSIX_SOURCE
++
++/* Define to empty if `const' does not conform to ANSI C. */
++#undef const
++
++/* Define to `__inline__' or `__inline' if that's what the C compiler
++ calls it, or to nothing if 'inline' is not supported under any name. */
++#ifndef __cplusplus
++#undef inline
++#endif
++
++/* Define to `int' if <sys/types.h> does not define. */
++#undef mode_t
++
++/* Define to `long int' if <sys/types.h> does not define. */
++#undef off_t
++
++/* Define to `unsigned int' if <sys/types.h> does not define. */
++#undef size_t
+diff -uprN clean/lrzsz-0.12.20/config.rpath lrzsz-0.12.20/config.rpath
+--- clean/lrzsz-0.12.20/config.rpath 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/config.rpath 2019-11-25 18:21:17.000000000 +0000
+@@ -0,0 +1,684 @@
++#! /bin/sh
++# Output a system dependent set of variables, describing how to set the
++# run time search path of shared libraries in an executable.
++#
++# Copyright 1996-2019 Free Software Foundation, Inc.
++# Taken from GNU libtool, 2001
++# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++#
++# The first argument passed to this file is the canonical host specification,
++# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
++# or
++# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
++# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
++# should be set by the caller.
++#
++# The set of defined variables is at the end of this script.
++
++# Known limitations:
++# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
++# than 256 bytes, otherwise the compiler driver will dump core. The only
++# known workaround is to choose shorter directory names for the build
++# directory and/or the installation directory.
++
++# All known linkers require a '.a' archive for static linking (except MSVC,
++# which needs '.lib').
++libext=a
++shrext=.so
++
++host="$1"
++host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
++host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
++host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
++
++# Code taken from libtool.m4's _LT_CC_BASENAME.
++
++for cc_temp in $CC""; do
++ case $cc_temp in
++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
++ \-*) ;;
++ *) break;;
++ esac
++done
++cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
++
++# Code taken from libtool.m4's _LT_COMPILER_PIC.
++
++wl=
++if test "$GCC" = yes; then
++ wl='-Wl,'
++else
++ case "$host_os" in
++ aix*)
++ wl='-Wl,'
++ ;;
++ mingw* | cygwin* | pw32* | os2* | cegcc*)
++ ;;
++ hpux9* | hpux10* | hpux11*)
++ wl='-Wl,'
++ ;;
++ irix5* | irix6* | nonstopux*)
++ wl='-Wl,'
++ ;;
++ linux* | k*bsd*-gnu | kopensolaris*-gnu)
++ case $cc_basename in
++ ecc*)
++ wl='-Wl,'
++ ;;
++ icc* | ifort*)
++ wl='-Wl,'
++ ;;
++ lf95*)
++ wl='-Wl,'
++ ;;
++ nagfor*)
++ wl='-Wl,-Wl,,'
++ ;;
++ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
++ wl='-Wl,'
++ ;;
++ ccc*)
++ wl='-Wl,'
++ ;;
++ xl* | bgxl* | bgf* | mpixl*)
++ wl='-Wl,'
++ ;;
++ como)
++ wl='-lopt='
++ ;;
++ *)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ F* | *Sun*Fortran*)
++ wl=
++ ;;
++ *Sun\ C*)
++ wl='-Wl,'
++ ;;
++ esac
++ ;;
++ esac
++ ;;
++ newsos6)
++ ;;
++ *nto* | *qnx*)
++ ;;
++ osf3* | osf4* | osf5*)
++ wl='-Wl,'
++ ;;
++ rdos*)
++ ;;
++ solaris*)
++ case $cc_basename in
++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
++ wl='-Qoption ld '
++ ;;
++ *)
++ wl='-Wl,'
++ ;;
++ esac
++ ;;
++ sunos4*)
++ wl='-Qoption ld '
++ ;;
++ sysv4 | sysv4.2uw2* | sysv4.3*)
++ wl='-Wl,'
++ ;;
++ sysv4*MP*)
++ ;;
++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++ wl='-Wl,'
++ ;;
++ unicos*)
++ wl='-Wl,'
++ ;;
++ uts4*)
++ ;;
++ esac
++fi
++
++# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
++
++hardcode_libdir_flag_spec=
++hardcode_libdir_separator=
++hardcode_direct=no
++hardcode_minus_L=no
++
++case "$host_os" in
++ cygwin* | mingw* | pw32* | cegcc*)
++ # FIXME: the MSVC++ port hasn't been tested in a loooong time
++ # When not using gcc, we currently assume that we are using
++ # Microsoft Visual C++.
++ if test "$GCC" != yes; then
++ with_gnu_ld=no
++ fi
++ ;;
++ interix*)
++ # we just hope/assume this is gcc and not c89 (= MSVC++)
++ with_gnu_ld=yes
++ ;;
++ openbsd*)
++ with_gnu_ld=no
++ ;;
++esac
++
++ld_shlibs=yes
++if test "$with_gnu_ld" = yes; then
++ # Set some defaults for GNU ld with shared library support. These
++ # are reset later if shared libraries are not supported. Putting them
++ # here allows them to be overridden if necessary.
++ # Unlike libtool, we use -rpath here, not --rpath, since the documented
++ # option of GNU ld is called -rpath, not --rpath.
++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++ case "$host_os" in
++ aix[3-9]*)
++ # On AIX/PPC, the GNU linker is very broken
++ if test "$host_cpu" != ia64; then
++ ld_shlibs=no
++ fi
++ ;;
++ amigaos*)
++ case "$host_cpu" in
++ powerpc)
++ ;;
++ m68k)
++ hardcode_libdir_flag_spec='-L$libdir'
++ hardcode_minus_L=yes
++ ;;
++ esac
++ ;;
++ beos*)
++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ :
++ else
++ ld_shlibs=no
++ fi
++ ;;
++ cygwin* | mingw* | pw32* | cegcc*)
++ # hardcode_libdir_flag_spec is actually meaningless, as there is
++ # no search path for DLLs.
++ hardcode_libdir_flag_spec='-L$libdir'
++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
++ :
++ else
++ ld_shlibs=no
++ fi
++ ;;
++ haiku*)
++ ;;
++ interix[3-9]*)
++ hardcode_direct=no
++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++ ;;
++ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ :
++ else
++ ld_shlibs=no
++ fi
++ ;;
++ netbsd*)
++ ;;
++ solaris*)
++ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
++ ld_shlibs=no
++ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ :
++ else
++ ld_shlibs=no
++ fi
++ ;;
++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
++ case `$LD -v 2>&1` in
++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
++ ld_shlibs=no
++ ;;
++ *)
++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
++ else
++ ld_shlibs=no
++ fi
++ ;;
++ esac
++ ;;
++ sunos4*)
++ hardcode_direct=yes
++ ;;
++ *)
++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ :
++ else
++ ld_shlibs=no
++ fi
++ ;;
++ esac
++ if test "$ld_shlibs" = no; then
++ hardcode_libdir_flag_spec=
++ fi
++else
++ case "$host_os" in
++ aix3*)
++ # Note: this linker hardcodes the directories in LIBPATH if there
++ # are no directories specified by -L.
++ hardcode_minus_L=yes
++ if test "$GCC" = yes; then
++ # Neither direct hardcoding nor static linking is supported with a
++ # broken collect2.
++ hardcode_direct=unsupported
++ fi
++ ;;
++ aix[4-9]*)
++ if test "$host_cpu" = ia64; then
++ # On IA64, the linker does run time linking by default, so we don't
++ # have to do anything special.
++ aix_use_runtimelinking=no
++ else
++ aix_use_runtimelinking=no
++ # Test if we are trying to use run time linking or normal
++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++ # need to do runtime linking.
++ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
++ for ld_flag in $LDFLAGS; do
++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
++ aix_use_runtimelinking=yes
++ break
++ fi
++ done
++ ;;
++ esac
++ fi
++ hardcode_direct=yes
++ hardcode_libdir_separator=':'
++ if test "$GCC" = yes; then
++ case $host_os in aix4.[012]|aix4.[012].*)
++ collect2name=`${CC} -print-prog-name=collect2`
++ if test -f "$collect2name" && \
++ strings "$collect2name" | grep resolve_lib_name >/dev/null
++ then
++ # We have reworked collect2
++ :
++ else
++ # We have old collect2
++ hardcode_direct=unsupported
++ hardcode_minus_L=yes
++ hardcode_libdir_flag_spec='-L$libdir'
++ hardcode_libdir_separator=
++ fi
++ ;;
++ esac
++ fi
++ # Begin _LT_AC_SYS_LIBPATH_AIX.
++ echo 'int main () { return 0; }' > conftest.c
++ ${CC} ${LDFLAGS} conftest.c -o conftest
++ aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
++}'`
++ if test -z "$aix_libpath"; then
++ aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
++}'`
++ fi
++ if test -z "$aix_libpath"; then
++ aix_libpath="/usr/lib:/lib"
++ fi
++ rm -f conftest.c conftest
++ # End _LT_AC_SYS_LIBPATH_AIX.
++ if test "$aix_use_runtimelinking" = yes; then
++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
++ else
++ if test "$host_cpu" = ia64; then
++ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
++ else
++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
++ fi
++ fi
++ ;;
++ amigaos*)
++ case "$host_cpu" in
++ powerpc)
++ ;;
++ m68k)
++ hardcode_libdir_flag_spec='-L$libdir'
++ hardcode_minus_L=yes
++ ;;
++ esac
++ ;;
++ bsdi[45]*)
++ ;;
++ cygwin* | mingw* | pw32* | cegcc*)
++ # When not using gcc, we currently assume that we are using
++ # Microsoft Visual C++.
++ # hardcode_libdir_flag_spec is actually meaningless, as there is
++ # no search path for DLLs.
++ hardcode_libdir_flag_spec=' '
++ libext=lib
++ ;;
++ darwin* | rhapsody*)
++ hardcode_direct=no
++ if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then
++ :
++ else
++ ld_shlibs=no
++ fi
++ ;;
++ dgux*)
++ hardcode_libdir_flag_spec='-L$libdir'
++ ;;
++ freebsd2.[01]*)
++ hardcode_direct=yes
++ hardcode_minus_L=yes
++ ;;
++ freebsd* | dragonfly*)
++ hardcode_libdir_flag_spec='-R$libdir'
++ hardcode_direct=yes
++ ;;
++ hpux9*)
++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
++ hardcode_libdir_separator=:
++ hardcode_direct=yes
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ hardcode_minus_L=yes
++ ;;
++ hpux10*)
++ if test "$with_gnu_ld" = no; then
++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
++ hardcode_libdir_separator=:
++ hardcode_direct=yes
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ hardcode_minus_L=yes
++ fi
++ ;;
++ hpux11*)
++ if test "$with_gnu_ld" = no; then
++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
++ hardcode_libdir_separator=:
++ case $host_cpu in
++ hppa*64*|ia64*)
++ hardcode_direct=no
++ ;;
++ *)
++ hardcode_direct=yes
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ hardcode_minus_L=yes
++ ;;
++ esac
++ fi
++ ;;
++ irix5* | irix6* | nonstopux*)
++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++ hardcode_libdir_separator=:
++ ;;
++ netbsd*)
++ hardcode_libdir_flag_spec='-R$libdir'
++ hardcode_direct=yes
++ ;;
++ newsos6)
++ hardcode_direct=yes
++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++ hardcode_libdir_separator=:
++ ;;
++ *nto* | *qnx*)
++ ;;
++ openbsd*)
++ if test -f /usr/libexec/ld.so; then
++ hardcode_direct=yes
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++ else
++ case "$host_os" in
++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
++ hardcode_libdir_flag_spec='-R$libdir'
++ ;;
++ *)
++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++ ;;
++ esac
++ fi
++ else
++ ld_shlibs=no
++ fi
++ ;;
++ os2*)
++ hardcode_libdir_flag_spec='-L$libdir'
++ hardcode_minus_L=yes
++ ;;
++ osf3*)
++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++ hardcode_libdir_separator=:
++ ;;
++ osf4* | osf5*)
++ if test "$GCC" = yes; then
++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++ else
++ # Both cc and cxx compiler support -rpath directly
++ hardcode_libdir_flag_spec='-rpath $libdir'
++ fi
++ hardcode_libdir_separator=:
++ ;;
++ solaris*)
++ hardcode_libdir_flag_spec='-R$libdir'
++ ;;
++ sunos4*)
++ hardcode_libdir_flag_spec='-L$libdir'
++ hardcode_direct=yes
++ hardcode_minus_L=yes
++ ;;
++ sysv4)
++ case $host_vendor in
++ sni)
++ hardcode_direct=yes # is this really true???
++ ;;
++ siemens)
++ hardcode_direct=no
++ ;;
++ motorola)
++ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
++ ;;
++ esac
++ ;;
++ sysv4.3*)
++ ;;
++ sysv4*MP*)
++ if test -d /usr/nec; then
++ ld_shlibs=yes
++ fi
++ ;;
++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
++ ;;
++ sysv5* | sco3.2v5* | sco5v6*)
++ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
++ hardcode_libdir_separator=':'
++ ;;
++ uts4*)
++ hardcode_libdir_flag_spec='-L$libdir'
++ ;;
++ *)
++ ld_shlibs=no
++ ;;
++ esac
++fi
++
++# Check dynamic linker characteristics
++# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
++# Unlike libtool.m4, here we don't care about _all_ names of the library, but
++# only about the one the linker finds when passed -lNAME. This is the last
++# element of library_names_spec in libtool.m4, or possibly two of them if the
++# linker has special search rules.
++library_names_spec= # the last element of library_names_spec in libtool.m4
++libname_spec='lib$name'
++case "$host_os" in
++ aix3*)
++ library_names_spec='$libname.a'
++ ;;
++ aix[4-9]*)
++ library_names_spec='$libname$shrext'
++ ;;
++ amigaos*)
++ case "$host_cpu" in
++ powerpc*)
++ library_names_spec='$libname$shrext' ;;
++ m68k)
++ library_names_spec='$libname.a' ;;
++ esac
++ ;;
++ beos*)
++ library_names_spec='$libname$shrext'
++ ;;
++ bsdi[45]*)
++ library_names_spec='$libname$shrext'
++ ;;
++ cygwin* | mingw* | pw32* | cegcc*)
++ shrext=.dll
++ library_names_spec='$libname.dll.a $libname.lib'
++ ;;
++ darwin* | rhapsody*)
++ shrext=.dylib
++ library_names_spec='$libname$shrext'
++ ;;
++ dgux*)
++ library_names_spec='$libname$shrext'
++ ;;
++ freebsd[23].*)
++ library_names_spec='$libname$shrext$versuffix'
++ ;;
++ freebsd* | dragonfly*)
++ library_names_spec='$libname$shrext'
++ ;;
++ gnu*)
++ library_names_spec='$libname$shrext'
++ ;;
++ haiku*)
++ library_names_spec='$libname$shrext'
++ ;;
++ hpux9* | hpux10* | hpux11*)
++ case $host_cpu in
++ ia64*)
++ shrext=.so
++ ;;
++ hppa*64*)
++ shrext=.sl
++ ;;
++ *)
++ shrext=.sl
++ ;;
++ esac
++ library_names_spec='$libname$shrext'
++ ;;
++ interix[3-9]*)
++ library_names_spec='$libname$shrext'
++ ;;
++ irix5* | irix6* | nonstopux*)
++ library_names_spec='$libname$shrext'
++ case "$host_os" in
++ irix5* | nonstopux*)
++ libsuff= shlibsuff=
++ ;;
++ *)
++ case $LD in
++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
++ *) libsuff= shlibsuff= ;;
++ esac
++ ;;
++ esac
++ ;;
++ linux*oldld* | linux*aout* | linux*coff*)
++ ;;
++ linux* | k*bsd*-gnu | kopensolaris*-gnu)
++ library_names_spec='$libname$shrext'
++ ;;
++ knetbsd*-gnu)
++ library_names_spec='$libname$shrext'
++ ;;
++ netbsd*)
++ library_names_spec='$libname$shrext'
++ ;;
++ newsos6)
++ library_names_spec='$libname$shrext'
++ ;;
++ *nto* | *qnx*)
++ library_names_spec='$libname$shrext'
++ ;;
++ openbsd*)
++ library_names_spec='$libname$shrext$versuffix'
++ ;;
++ os2*)
++ libname_spec='$name'
++ shrext=.dll
++ library_names_spec='$libname.a'
++ ;;
++ osf3* | osf4* | osf5*)
++ library_names_spec='$libname$shrext'
++ ;;
++ rdos*)
++ ;;
++ solaris*)
++ library_names_spec='$libname$shrext'
++ ;;
++ sunos4*)
++ library_names_spec='$libname$shrext$versuffix'
++ ;;
++ sysv4 | sysv4.3*)
++ library_names_spec='$libname$shrext'
++ ;;
++ sysv4*MP*)
++ library_names_spec='$libname$shrext'
++ ;;
++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++ library_names_spec='$libname$shrext'
++ ;;
++ tpf*)
++ library_names_spec='$libname$shrext'
++ ;;
++ uts4*)
++ library_names_spec='$libname$shrext'
++ ;;
++esac
++
++sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
++escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
++shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
++escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
++escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
++escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
++
++LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
++
++# How to pass a linker flag through the compiler.
++wl="$escaped_wl"
++
++# Static library suffix (normally "a").
++libext="$libext"
++
++# Shared library suffix (normally "so").
++shlibext="$shlibext"
++
++# Format of library name prefix.
++libname_spec="$escaped_libname_spec"
++
++# Library names that the linker finds when passed -lNAME.
++library_names_spec="$escaped_library_names_spec"
++
++# Flag to hardcode \$libdir into a binary during linking.
++# This must work even if \$libdir does not exist.
++hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
++
++# Whether we need a single -rpath flag with a separated argument.
++hardcode_libdir_separator="$hardcode_libdir_separator"
++
++# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
++# resulting binary.
++hardcode_direct="$hardcode_direct"
++
++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
++# resulting binary.
++hardcode_minus_L="$hardcode_minus_L"
++
++EOF
+diff -uprN clean/lrzsz-0.12.20/config.sub lrzsz-0.12.20/config.sub
+--- clean/lrzsz-0.12.20/config.sub 1998-04-26 14:20:59.000000000 +0100
++++ lrzsz-0.12.20/config.sub 2019-11-26 11:37:46.000000000 +0000
+@@ -1,35 +1,40 @@
+ #! /bin/sh
+-# Configuration validation subroutine script, version 1.1.
+-# Copyright (C) 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+-# This file is (in principle) common to ALL GNU software.
+-# The presence of a machine in this file suggests that SOME GNU software
+-# can handle that machine. It does not imply ALL GNU software can.
+-#
+-# This file is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2 of the License, or
++# Configuration validation subroutine script.
++# Copyright 1992-2019 Free Software Foundation, Inc.
++
++timestamp='2019-01-05'
++
++# This file is free software; you can redistribute it and/or modify it
++# under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 3 of the License, or
+ # (at your option) any later version.
+ #
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++# General Public License for more details.
+ #
+ # You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330,
+-# Boston, MA 02111-1307, USA.
+-
++# along with this program; if not, see <https://www.gnu.org/licenses/>.
++#
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+-# the same distribution terms that you use for the rest of that program.
++# the same distribution terms that you use for the rest of that
++# program. This Exception is an additional permission under section 7
++# of the GNU General Public License, version 3 ("GPLv3").
++
+
++# Please send patches to <config-patches@gnu.org>.
++#
+ # Configuration subroutine to validate and canonicalize a configuration type.
+ # Supply the specified configuration type as an argument.
+ # If it is invalid, we print an error message on stderr and exit with code 1.
+ # Otherwise, we print the canonical config type on stdout and succeed.
+
++# You can get the latest version of this script from:
++# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
++
+ # This file is supposed to be the same for all GNU packages
+ # and recognize all the CPU types, system types and aliases
+ # that are meaningful with *any* GNU software.
+@@ -41,570 +46,1231 @@
+ # The goal of this file is to map all the various variations of a given
+ # machine specification into a single specification in the form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
++# or in some cases, the newer four-part form:
++# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+ # It is wrong to echo any other type of specification.
+
+-if [ x$1 = x ]
+-then
+- echo Configuration name missing. 1>&2
+- echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
+- echo "or $0 ALIAS" 1>&2
+- echo where ALIAS is a recognized configuration type. 1>&2
+- exit 1
+-fi
++me=`echo "$0" | sed -e 's,.*/,,'`
+
+-# First pass through any local machine types.
+-case $1 in
+- *local*)
+- echo $1
+- exit 0
+- ;;
+- *)
+- ;;
++usage="\
++Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
++
++Canonicalize a configuration name.
++
++Options:
++ -h, --help print this help, then exit
++ -t, --time-stamp print date of last modification, then exit
++ -v, --version print version number, then exit
++
++Report bugs and patches to <config-patches@gnu.org>."
++
++version="\
++GNU config.sub ($timestamp)
++
++Copyright 1992-2019 Free Software Foundation, Inc.
++
++This is free software; see the source for copying conditions. There is NO
++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++
++help="
++Try \`$me --help' for more information."
++
++# Parse command line
++while test $# -gt 0 ; do
++ case $1 in
++ --time-stamp | --time* | -t )
++ echo "$timestamp" ; exit ;;
++ --version | -v )
++ echo "$version" ; exit ;;
++ --help | --h* | -h )
++ echo "$usage"; exit ;;
++ -- ) # Stop option processing
++ shift; break ;;
++ - ) # Use stdin as input.
++ break ;;
++ -* )
++ echo "$me: invalid option $1$help" >&2
++ exit 1 ;;
++
++ *local*)
++ # First pass through any local machine types.
++ echo "$1"
++ exit ;;
++
++ * )
++ break ;;
++ esac
++done
++
++case $# in
++ 0) echo "$me: missing argument$help" >&2
++ exit 1;;
++ 1) ;;
++ *) echo "$me: too many arguments$help" >&2
++ exit 1;;
+ esac
+
+-# Separate what the user gave into CPU-COMPANY and OS (if any).
+-basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+-if [ $basic_machine != $1 ]
+-then os=`echo $1 | sed 's/.*-/-/'`
+-else os=; fi
+-
+-### Let's recognize common machines as not being operating systems so
+-### that things like config.sub decstation-3100 work. We also
+-### recognize some manufacturers as not being operating systems, so we
+-### can provide default operating systems below.
+-case $os in
+- -sun*os*)
+- # Prevent following clause from handling this invalid input.
+- ;;
+- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp )
+- os=
+- basic_machine=$1
+- ;;
+- -hiux*)
+- os=-hiuxwe2
+- ;;
+- -sco4)
+- os=-sco3.2v4
+- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+- ;;
+- -sco3.2.[4-9]*)
+- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+- ;;
+- -sco3.2v[4-9]*)
+- # Don't forget version if it is 3.2v4 or newer.
+- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+- ;;
+- -sco*)
+- os=-sco3.2v2
+- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+- ;;
+- -isc)
+- os=-isc2.2
+- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+- ;;
+- -clix*)
+- basic_machine=clipper-intergraph
++# Split fields of configuration type
++# shellcheck disable=SC2162
++IFS="-" read field1 field2 field3 field4 <<EOF
++$1
++EOF
++
++# Separate into logical components for further validation
++case $1 in
++ *-*-*-*-*)
++ echo Invalid configuration \`"$1"\': more than four components >&2
++ exit 1
+ ;;
+- -isc*)
+- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
++ *-*-*-*)
++ basic_machine=$field1-$field2
++ os=$field3-$field4
+ ;;
+- -lynx*)
+- os=-lynxos
++ *-*-*)
++ # Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two
++ # parts
++ maybe_os=$field2-$field3
++ case $maybe_os in
++ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc \
++ | linux-newlib* | linux-musl* | linux-uclibc* | uclinux-uclibc* \
++ | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \
++ | netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \
++ | storm-chaos* | os2-emx* | rtmk-nova*)
++ basic_machine=$field1
++ os=$maybe_os
++ ;;
++ android-linux)
++ basic_machine=$field1-unknown
++ os=linux-android
++ ;;
++ *)
++ basic_machine=$field1-$field2
++ os=$field3
++ ;;
++ esac
+ ;;
+- -ptx*)
+- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
++ *-*)
++ # A lone config we happen to match not fitting any pattern
++ case $field1-$field2 in
++ decstation-3100)
++ basic_machine=mips-dec
++ os=
++ ;;
++ *-*)
++ # Second component is usually, but not always the OS
++ case $field2 in
++ # Prevent following clause from handling this valid os
++ sun*os*)
++ basic_machine=$field1
++ os=$field2
++ ;;
++ # Manufacturers
++ dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \
++ | att* | 7300* | 3300* | delta* | motorola* | sun[234]* \
++ | unicom* | ibm* | next | hp | isi* | apollo | altos* \
++ | convergent* | ncr* | news | 32* | 3600* | 3100* \
++ | hitachi* | c[123]* | convex* | sun | crds | omron* | dg \
++ | ultra | tti* | harris | dolphin | highlevel | gould \
++ | cbm | ns | masscomp | apple | axis | knuth | cray \
++ | microblaze* | sim | cisco \
++ | oki | wec | wrs | winbond)
++ basic_machine=$field1-$field2
++ os=
++ ;;
++ *)
++ basic_machine=$field1
++ os=$field2
++ ;;
++ esac
++ ;;
++ esac
+ ;;
+- -windowsnt*)
+- os=`echo $os | sed -e 's/windowsnt/winnt/'`
++ *)
++ # Convert single-component short-hands not valid as part of
++ # multi-component configurations.
++ case $field1 in
++ 386bsd)
++ basic_machine=i386-pc
++ os=bsd
++ ;;
++ a29khif)
++ basic_machine=a29k-amd
++ os=udi
++ ;;
++ adobe68k)
++ basic_machine=m68010-adobe
++ os=scout
++ ;;
++ alliant)
++ basic_machine=fx80-alliant
++ os=
++ ;;
++ altos | altos3068)
++ basic_machine=m68k-altos
++ os=
++ ;;
++ am29k)
++ basic_machine=a29k-none
++ os=bsd
++ ;;
++ amdahl)
++ basic_machine=580-amdahl
++ os=sysv
++ ;;
++ amiga)
++ basic_machine=m68k-unknown
++ os=
++ ;;
++ amigaos | amigados)
++ basic_machine=m68k-unknown
++ os=amigaos
++ ;;
++ amigaunix | amix)
++ basic_machine=m68k-unknown
++ os=sysv4
++ ;;
++ apollo68)
++ basic_machine=m68k-apollo
++ os=sysv
++ ;;
++ apollo68bsd)
++ basic_machine=m68k-apollo
++ os=bsd
++ ;;
++ aros)
++ basic_machine=i386-pc
++ os=aros
++ ;;
++ aux)
++ basic_machine=m68k-apple
++ os=aux
++ ;;
++ balance)
++ basic_machine=ns32k-sequent
++ os=dynix
++ ;;
++ blackfin)
++ basic_machine=bfin-unknown
++ os=linux
++ ;;
++ cegcc)
++ basic_machine=arm-unknown
++ os=cegcc
++ ;;
++ convex-c1)
++ basic_machine=c1-convex
++ os=bsd
++ ;;
++ convex-c2)
++ basic_machine=c2-convex
++ os=bsd
++ ;;
++ convex-c32)
++ basic_machine=c32-convex
++ os=bsd
++ ;;
++ convex-c34)
++ basic_machine=c34-convex
++ os=bsd
++ ;;
++ convex-c38)
++ basic_machine=c38-convex
++ os=bsd
++ ;;
++ cray)
++ basic_machine=j90-cray
++ os=unicos
++ ;;
++ crds | unos)
++ basic_machine=m68k-crds
++ os=
++ ;;
++ da30)
++ basic_machine=m68k-da30
++ os=
++ ;;
++ decstation | pmax | pmin | dec3100 | decstatn)
++ basic_machine=mips-dec
++ os=
++ ;;
++ delta88)
++ basic_machine=m88k-motorola
++ os=sysv3
++ ;;
++ dicos)
++ basic_machine=i686-pc
++ os=dicos
++ ;;
++ djgpp)
++ basic_machine=i586-pc
++ os=msdosdjgpp
++ ;;
++ ebmon29k)
++ basic_machine=a29k-amd
++ os=ebmon
++ ;;
++ es1800 | OSE68k | ose68k | ose | OSE)
++ basic_machine=m68k-ericsson
++ os=ose
++ ;;
++ gmicro)
++ basic_machine=tron-gmicro
++ os=sysv
++ ;;
++ go32)
++ basic_machine=i386-pc
++ os=go32
++ ;;
++ h8300hms)
++ basic_machine=h8300-hitachi
++ os=hms
++ ;;
++ h8300xray)
++ basic_machine=h8300-hitachi
++ os=xray
++ ;;
++ h8500hms)
++ basic_machine=h8500-hitachi
++ os=hms
++ ;;
++ harris)
++ basic_machine=m88k-harris
++ os=sysv3
++ ;;
++ hp300)
++ basic_machine=m68k-hp
++ ;;
++ hp300bsd)
++ basic_machine=m68k-hp
++ os=bsd
++ ;;
++ hp300hpux)
++ basic_machine=m68k-hp
++ os=hpux
++ ;;
++ hppaosf)
++ basic_machine=hppa1.1-hp
++ os=osf
++ ;;
++ hppro)
++ basic_machine=hppa1.1-hp
++ os=proelf
++ ;;
++ i386mach)
++ basic_machine=i386-mach
++ os=mach
++ ;;
++ vsta)
++ basic_machine=i386-pc
++ os=vsta
++ ;;
++ isi68 | isi)
++ basic_machine=m68k-isi
++ os=sysv
++ ;;
++ m68knommu)
++ basic_machine=m68k-unknown
++ os=linux
++ ;;
++ magnum | m3230)
++ basic_machine=mips-mips
++ os=sysv
++ ;;
++ merlin)
++ basic_machine=ns32k-utek
++ os=sysv
++ ;;
++ mingw64)
++ basic_machine=x86_64-pc
++ os=mingw64
++ ;;
++ mingw32)
++ basic_machine=i686-pc
++ os=mingw32
++ ;;
++ mingw32ce)
++ basic_machine=arm-unknown
++ os=mingw32ce
++ ;;
++ monitor)
++ basic_machine=m68k-rom68k
++ os=coff
++ ;;
++ morphos)
++ basic_machine=powerpc-unknown
++ os=morphos
++ ;;
++ moxiebox)
++ basic_machine=moxie-unknown
++ os=moxiebox
++ ;;
++ msdos)
++ basic_machine=i386-pc
++ os=msdos
++ ;;
++ msys)
++ basic_machine=i686-pc
++ os=msys
++ ;;
++ mvs)
++ basic_machine=i370-ibm
++ os=mvs
++ ;;
++ nacl)
++ basic_machine=le32-unknown
++ os=nacl
++ ;;
++ ncr3000)
++ basic_machine=i486-ncr
++ os=sysv4
++ ;;
++ netbsd386)
++ basic_machine=i386-pc
++ os=netbsd
++ ;;
++ netwinder)
++ basic_machine=armv4l-rebel
++ os=linux
++ ;;
++ news | news700 | news800 | news900)
++ basic_machine=m68k-sony
++ os=newsos
++ ;;
++ news1000)
++ basic_machine=m68030-sony
++ os=newsos
++ ;;
++ necv70)
++ basic_machine=v70-nec
++ os=sysv
++ ;;
++ nh3000)
++ basic_machine=m68k-harris
++ os=cxux
++ ;;
++ nh[45]000)
++ basic_machine=m88k-harris
++ os=cxux
++ ;;
++ nindy960)
++ basic_machine=i960-intel
++ os=nindy
++ ;;
++ mon960)
++ basic_machine=i960-intel
++ os=mon960
++ ;;
++ nonstopux)
++ basic_machine=mips-compaq
++ os=nonstopux
++ ;;
++ os400)
++ basic_machine=powerpc-ibm
++ os=os400
++ ;;
++ OSE68000 | ose68000)
++ basic_machine=m68000-ericsson
++ os=ose
++ ;;
++ os68k)
++ basic_machine=m68k-none
++ os=os68k
++ ;;
++ paragon)
++ basic_machine=i860-intel
++ os=osf
++ ;;
++ parisc)
++ basic_machine=hppa-unknown
++ os=linux
++ ;;
++ pw32)
++ basic_machine=i586-unknown
++ os=pw32
++ ;;
++ rdos | rdos64)
++ basic_machine=x86_64-pc
++ os=rdos
++ ;;
++ rdos32)
++ basic_machine=i386-pc
++ os=rdos
++ ;;
++ rom68k)
++ basic_machine=m68k-rom68k
++ os=coff
++ ;;
++ sa29200)
++ basic_machine=a29k-amd
++ os=udi
++ ;;
++ sei)
++ basic_machine=mips-sei
++ os=seiux
++ ;;
++ sequent)
++ basic_machine=i386-sequent
++ os=
++ ;;
++ sps7)
++ basic_machine=m68k-bull
++ os=sysv2
++ ;;
++ st2000)
++ basic_machine=m68k-tandem
++ os=
++ ;;
++ stratus)
++ basic_machine=i860-stratus
++ os=sysv4
++ ;;
++ sun2)
++ basic_machine=m68000-sun
++ os=
++ ;;
++ sun2os3)
++ basic_machine=m68000-sun
++ os=sunos3
++ ;;
++ sun2os4)
++ basic_machine=m68000-sun
++ os=sunos4
++ ;;
++ sun3)
++ basic_machine=m68k-sun
++ os=
++ ;;
++ sun3os3)
++ basic_machine=m68k-sun
++ os=sunos3
++ ;;
++ sun3os4)
++ basic_machine=m68k-sun
++ os=sunos4
++ ;;
++ sun4)
++ basic_machine=sparc-sun
++ os=
++ ;;
++ sun4os3)
++ basic_machine=sparc-sun
++ os=sunos3
++ ;;
++ sun4os4)
++ basic_machine=sparc-sun
++ os=sunos4
++ ;;
++ sun4sol2)
++ basic_machine=sparc-sun
++ os=solaris2
++ ;;
++ sun386 | sun386i | roadrunner)
++ basic_machine=i386-sun
++ os=
++ ;;
++ sv1)
++ basic_machine=sv1-cray
++ os=unicos
++ ;;
++ symmetry)
++ basic_machine=i386-sequent
++ os=dynix
++ ;;
++ t3e)
++ basic_machine=alphaev5-cray
++ os=unicos
++ ;;
++ t90)
++ basic_machine=t90-cray
++ os=unicos
++ ;;
++ toad1)
++ basic_machine=pdp10-xkl
++ os=tops20
++ ;;
++ tpf)
++ basic_machine=s390x-ibm
++ os=tpf
++ ;;
++ udi29k)
++ basic_machine=a29k-amd
++ os=udi
++ ;;
++ ultra3)
++ basic_machine=a29k-nyu
++ os=sym1
++ ;;
++ v810 | necv810)
++ basic_machine=v810-nec
++ os=none
++ ;;
++ vaxv)
++ basic_machine=vax-dec
++ os=sysv
++ ;;
++ vms)
++ basic_machine=vax-dec
++ os=vms
++ ;;
++ vxworks960)
++ basic_machine=i960-wrs
++ os=vxworks
++ ;;
++ vxworks68)
++ basic_machine=m68k-wrs
++ os=vxworks
++ ;;
++ vxworks29k)
++ basic_machine=a29k-wrs
++ os=vxworks
++ ;;
++ xbox)
++ basic_machine=i686-pc
++ os=mingw32
++ ;;
++ ymp)
++ basic_machine=ymp-cray
++ os=unicos
++ ;;
++ *)
++ basic_machine=$1
++ os=
++ ;;
++ esac
+ ;;
+ esac
+
+-# Decode aliases for certain CPU-COMPANY combinations.
++# Decode 1-component or ad-hoc basic machines
+ case $basic_machine in
+- # Recognize the basic CPU types without company name.
+- # Some are omitted here because they have special meanings below.
+- tahoe | i[345]86 | i860 | m68k | m68000 | m88k | ns32k | arm \
+- | arme[lb] | pyramid \
+- | tron | a29k | 580 | i960 | h8300 | hppa1.0 | hppa1.1 \
+- | alpha | we32k | ns16k | clipper | sparclite | i370 | sh \
+- | powerpc | powerpcle | sparc64 | 1750a | dsp16xx | mips64 | mipsel \
+- | pdp11 | mips64el | mips64orion | mips64orionel \
+- | sparc)
+- basic_machine=$basic_machine-unknown
++ # Here we handle the default manufacturer of certain CPU types. It is in
++ # some cases the only manufacturer, in others, it is the most popular.
++ w89k)
++ cpu=hppa1.1
++ vendor=winbond
++ ;;
++ op50n)
++ cpu=hppa1.1
++ vendor=oki
++ ;;
++ op60c)
++ cpu=hppa1.1
++ vendor=oki
++ ;;
++ ibm*)
++ cpu=i370
++ vendor=ibm
+ ;;
+- # Object if more than one company name word.
+- *-*-*)
+- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+- exit 1
++ orion105)
++ cpu=clipper
++ vendor=highlevel
+ ;;
+- # Recognize the basic CPU types with company name.
+- vax-* | tahoe-* | i[345]86-* | i860-* | m68k-* | m68000-* | m88k-* \
+- | sparc-* | ns32k-* | fx80-* | arm-* | c[123]* \
+- | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* | power-* \
+- | none-* | 580-* | cray2-* | h8300-* | i960-* | xmp-* | ymp-* \
+- | hppa1.0-* | hppa1.1-* | alpha-* | we32k-* | cydra-* | ns16k-* \
+- | pn-* | np1-* | xps100-* | clipper-* | orion-* | sparclite-* \
+- | pdp11-* | sh-* | powerpc-* | powerpcle-* | sparc64-* | mips64-* | mipsel-* \
+- | mips64el-* | mips64orion-* | mips64orionel-*)
++ mac | mpw | mac-mpw)
++ cpu=m68k
++ vendor=apple
++ ;;
++ pmac | pmac-mpw)
++ cpu=powerpc
++ vendor=apple
+ ;;
++
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+- basic_machine=m68000-att
++ cpu=m68000
++ vendor=att
+ ;;
+ 3b*)
+- basic_machine=we32k-att
+- ;;
+- alliant | fx80)
+- basic_machine=fx80-alliant
+- ;;
+- altos | altos3068)
+- basic_machine=m68k-altos
+- ;;
+- am29k)
+- basic_machine=a29k-none
+- os=-bsd
+- ;;
+- amdahl)
+- basic_machine=580-amdahl
+- os=-sysv
+- ;;
+- amiga | amiga-*)
+- basic_machine=m68k-cbm
+- ;;
+- amigados)
+- basic_machine=m68k-cbm
+- os=-amigados
+- ;;
+- amigaunix | amix)
+- basic_machine=m68k-cbm
+- os=-sysv4
+- ;;
+- apollo68)
+- basic_machine=m68k-apollo
+- os=-sysv
+- ;;
+- balance)
+- basic_machine=ns32k-sequent
+- os=-dynix
++ cpu=we32k
++ vendor=att
+ ;;
+- convex-c1)
+- basic_machine=c1-convex
+- os=-bsd
+- ;;
+- convex-c2)
+- basic_machine=c2-convex
+- os=-bsd
+- ;;
+- convex-c32)
+- basic_machine=c32-convex
+- os=-bsd
+- ;;
+- convex-c34)
+- basic_machine=c34-convex
+- os=-bsd
+- ;;
+- convex-c38)
+- basic_machine=c38-convex
+- os=-bsd
+- ;;
+- cray | ymp)
+- basic_machine=ymp-cray
+- os=-unicos
+- ;;
+- cray2)
+- basic_machine=cray2-cray
+- os=-unicos
+- ;;
+- crds | unos)
+- basic_machine=m68k-crds
+- ;;
+- da30 | da30-*)
+- basic_machine=m68k-da30
+- ;;
+- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+- basic_machine=mips-dec
++ bluegene*)
++ cpu=powerpc
++ vendor=ibm
++ os=cnk
++ ;;
++ decsystem10* | dec10*)
++ cpu=pdp10
++ vendor=dec
++ os=tops10
++ ;;
++ decsystem20* | dec20*)
++ cpu=pdp10
++ vendor=dec
++ os=tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+- basic_machine=m68k-motorola
++ cpu=m68k
++ vendor=motorola
+ ;;
+- delta88)
+- basic_machine=m88k-motorola
+- os=-sysv3
+- ;;
+- dpx20 | dpx20-*)
+- basic_machine=rs6000-bull
+- os=-bosx
+- ;;
+- dpx2* | dpx2*-bull)
+- basic_machine=m68k-bull
+- os=-sysv3
+- ;;
+- ebmon29k)
+- basic_machine=a29k-amd
+- os=-ebmon
+- ;;
+- elxsi)
+- basic_machine=elxsi-elxsi
+- os=-bsd
++ dpx2*)
++ cpu=m68k
++ vendor=bull
++ os=sysv3
+ ;;
+ encore | umax | mmax)
+- basic_machine=ns32k-encore
++ cpu=ns32k
++ vendor=encore
++ ;;
++ elxsi)
++ cpu=elxsi
++ vendor=elxsi
++ os=${os:-bsd}
+ ;;
+ fx2800)
+- basic_machine=i860-alliant
++ cpu=i860
++ vendor=alliant
+ ;;
+ genix)
+- basic_machine=ns32k-ns
+- ;;
+- gmicro)
+- basic_machine=tron-gmicro
+- os=-sysv
++ cpu=ns32k
++ vendor=ns
+ ;;
+ h3050r* | hiux*)
+- basic_machine=hppa1.1-hitachi
+- os=-hiuxwe2
+- ;;
+- h8300hms)
+- basic_machine=h8300-hitachi
+- os=-hms
+- ;;
+- harris)
+- basic_machine=m88k-harris
+- os=-sysv3
+- ;;
+- hp300-*)
+- basic_machine=m68k-hp
+- ;;
+- hp300bsd)
+- basic_machine=m68k-hp
+- os=-bsd
+- ;;
+- hp300hpux)
+- basic_machine=m68k-hp
+- os=-hpux
++ cpu=hppa1.1
++ vendor=hitachi
++ os=hiuxwe2
++ ;;
++ hp3k9[0-9][0-9] | hp9[0-9][0-9])
++ cpu=hppa1.0
++ vendor=hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+- basic_machine=m68000-hp
++ cpu=m68000
++ vendor=hp
+ ;;
+ hp9k3[2-9][0-9])
+- basic_machine=m68k-hp
++ cpu=m68k
++ vendor=hp
+ ;;
+- hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7)
+- basic_machine=hppa1.1-hp
++ hp9k6[0-9][0-9] | hp6[0-9][0-9])
++ cpu=hppa1.0
++ vendor=hp
++ ;;
++ hp9k7[0-79][0-9] | hp7[0-79][0-9])
++ cpu=hppa1.1
++ vendor=hp
++ ;;
++ hp9k78[0-9] | hp78[0-9])
++ # FIXME: really hppa2.0-hp
++ cpu=hppa1.1
++ vendor=hp
++ ;;
++ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
++ # FIXME: really hppa2.0-hp
++ cpu=hppa1.1
++ vendor=hp
++ ;;
++ hp9k8[0-9][13679] | hp8[0-9][13679])
++ cpu=hppa1.1
++ vendor=hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+- basic_machine=hppa1.0-hp
++ cpu=hppa1.0
++ vendor=hp
+ ;;
+- i370-ibm* | ibm*)
+- basic_machine=i370-ibm
+- os=-mvs
+- ;;
+-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
+- i[345]86v32)
+- basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'`
+- os=-sysv32
+- ;;
+- i[345]86v4*)
+- basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'`
+- os=-sysv4
+- ;;
+- i[345]86v)
+- basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'`
+- os=-sysv
+- ;;
+- i[345]86sol2)
+- basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'`
+- os=-solaris2
++ i*86v32)
++ cpu=`echo "$1" | sed -e 's/86.*/86/'`
++ vendor=pc
++ os=sysv32
++ ;;
++ i*86v4*)
++ cpu=`echo "$1" | sed -e 's/86.*/86/'`
++ vendor=pc
++ os=sysv4
++ ;;
++ i*86v)
++ cpu=`echo "$1" | sed -e 's/86.*/86/'`
++ vendor=pc
++ os=sysv
++ ;;
++ i*86sol2)
++ cpu=`echo "$1" | sed -e 's/86.*/86/'`
++ vendor=pc
++ os=solaris2
++ ;;
++ j90 | j90-cray)
++ cpu=j90
++ vendor=cray
++ os=${os:-unicos}
+ ;;
+ iris | iris4d)
+- basic_machine=mips-sgi
++ cpu=mips
++ vendor=sgi
+ case $os in
+- -irix*)
++ irix*)
+ ;;
+ *)
+- os=-irix4
++ os=irix4
+ ;;
+ esac
+ ;;
+- isi68 | isi)
+- basic_machine=m68k-isi
+- os=-sysv
+- ;;
+- m88k-omron*)
+- basic_machine=m88k-omron
+- ;;
+- magnum | m3230)
+- basic_machine=mips-mips
+- os=-sysv
+- ;;
+- merlin)
+- basic_machine=ns32k-utek
+- os=-sysv
+- ;;
+ miniframe)
+- basic_machine=m68000-convergent
+- ;;
+- mips3*-*)
+- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+- ;;
+- mips3*)
+- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
++ cpu=m68000
++ vendor=convergent
+ ;;
+- ncr3000)
+- basic_machine=i486-ncr
+- os=-sysv4
+- ;;
+- news | news700 | news800 | news900)
+- basic_machine=m68k-sony
+- os=-newsos
+- ;;
+- news1000)
+- basic_machine=m68030-sony
+- os=-newsos
++ *mint | mint[0-9]* | *MiNT | *MiNT[0-9]*)
++ cpu=m68k
++ vendor=atari
++ os=mint
+ ;;
+ news-3600 | risc-news)
+- basic_machine=mips-sony
+- os=-newsos
+- ;;
+- next | m*-next )
+- basic_machine=m68k-next
++ cpu=mips
++ vendor=sony
++ os=newsos
++ ;;
++ next | m*-next)
++ cpu=m68k
++ vendor=next
+ case $os in
+- -nextstep* )
++ openstep*)
++ ;;
++ nextstep*)
+ ;;
+- -ns2*)
+- os=-nextstep2
++ ns2*)
++ os=nextstep2
+ ;;
+ *)
+- os=-nextstep3
++ os=nextstep3
+ ;;
+ esac
+ ;;
+- nh3000)
+- basic_machine=m68k-harris
+- os=-cxux
+- ;;
+- nh[45]000)
+- basic_machine=m88k-harris
+- os=-cxux
+- ;;
+- nindy960)
+- basic_machine=i960-intel
+- os=-nindy
+- ;;
+ np1)
+- basic_machine=np1-gould
++ cpu=np1
++ vendor=gould
+ ;;
+- pa-hitachi)
+- basic_machine=hppa1.1-hitachi
+- os=-hiuxwe2
++ op50n-* | op60c-*)
++ cpu=hppa1.1
++ vendor=oki
++ os=proelf
+ ;;
+- paragon)
+- basic_machine=i860-intel
+- os=-osf
++ pa-hitachi)
++ cpu=hppa1.1
++ vendor=hitachi
++ os=hiuxwe2
+ ;;
+ pbd)
+- basic_machine=sparc-tti
++ cpu=sparc
++ vendor=tti
+ ;;
+ pbb)
+- basic_machine=m68k-tti
+- ;;
+- pc532 | pc532-*)
+- basic_machine=ns32k-pc532
++ cpu=m68k
++ vendor=tti
+ ;;
+- pentium | p5 | p6)
+- # We don't have specific support for the Intel Pentium (p6) followon yet, so just call it a Pentium
+- basic_machine=i586-intel
+- ;;
+- pentium-* | p5-* | p6-*)
+- # We don't have specific support for the Intel Pentium (p6) followon yet, so just call it a Pentium
+- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+- ;;
+- k5)
+- # We don't have specific support for AMD's K5 yet, so just call it a Pentium
+- basic_machine=i586-amd
+- ;;
+- nexen)
+- # We don't have specific support for Nexgen yet, so just call it a Pentium
+- basic_machine=i586-nexgen
++ pc532)
++ cpu=ns32k
++ vendor=pc532
+ ;;
+ pn)
+- basic_machine=pn-gould
+- ;;
+- power) basic_machine=rs6000-ibm
++ cpu=pn
++ vendor=gould
+ ;;
+- ppc) basic_machine=powerpc-unknown
+- ;;
+- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+- ;;
+- ppcle | powerpclittle | ppc-le | powerpc-little)
+- basic_machine=powerpcle-unknown
+- ;;
+- ppcle-* | powerpclittle-*)
+- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
++ power)
++ cpu=power
++ vendor=ibm
+ ;;
+ ps2)
+- basic_machine=i386-ibm
++ cpu=i386
++ vendor=ibm
+ ;;
+ rm[46]00)
+- basic_machine=mips-siemens
++ cpu=mips
++ vendor=siemens
+ ;;
+ rtpc | rtpc-*)
+- basic_machine=romp-ibm
++ cpu=romp
++ vendor=ibm
+ ;;
+- sequent)
+- basic_machine=i386-sequent
++ sde)
++ cpu=mipsisa32
++ vendor=sde
++ os=${os:-elf}
++ ;;
++ simso-wrs)
++ cpu=sparclite
++ vendor=wrs
++ os=vxworks
+ ;;
+- sh)
+- basic_machine=sh-hitachi
+- os=-hms
++ tower | tower-32)
++ cpu=m68k
++ vendor=ncr
+ ;;
+- sps7)
+- basic_machine=m68k-bull
+- os=-sysv2
++ vpp*|vx|vx-*)
++ cpu=f301
++ vendor=fujitsu
++ ;;
++ w65)
++ cpu=w65
++ vendor=wdc
++ ;;
++ w89k-*)
++ cpu=hppa1.1
++ vendor=winbond
++ os=proelf
+ ;;
+- spur)
+- basic_machine=spur-unknown
++ none)
++ cpu=none
++ vendor=none
+ ;;
+- sun2)
+- basic_machine=m68000-sun
++ leon|leon[3-9])
++ cpu=sparc
++ vendor=$basic_machine
++ ;;
++ leon-*|leon[3-9]-*)
++ cpu=sparc
++ vendor=`echo "$basic_machine" | sed 's/-.*//'`
+ ;;
+- sun2os3)
+- basic_machine=m68000-sun
+- os=-sunos3
++
++ *-*)
++ # shellcheck disable=SC2162
++ IFS="-" read cpu vendor <<EOF
++$basic_machine
++EOF
++ ;;
++ # We use `pc' rather than `unknown'
++ # because (1) that's what they normally are, and
++ # (2) the word "unknown" tends to confuse beginning users.
++ i*86 | x86_64)
++ cpu=$basic_machine
++ vendor=pc
++ ;;
++ # These rules are duplicated from below for sake of the special case above;
++ # i.e. things that normalized to x86 arches should also default to "pc"
++ pc98)
++ cpu=i386
++ vendor=pc
++ ;;
++ x64 | amd64)
++ cpu=x86_64
++ vendor=pc
+ ;;
+- sun2os4)
+- basic_machine=m68000-sun
+- os=-sunos4
++ # Recognize the basic CPU types without company name.
++ *)
++ cpu=$basic_machine
++ vendor=unknown
++ ;;
++esac
++
++unset -v basic_machine
++
++# Decode basic machines in the full and proper CPU-Company form.
++case $cpu-$vendor in
++ # Here we handle the default manufacturer of certain CPU types in canonical form. It is in
++ # some cases the only manufacturer, in others, it is the most popular.
++ craynv-unknown)
++ vendor=cray
++ os=${os:-unicosmp}
+ ;;
+- sun3os3)
+- basic_machine=m68k-sun
+- os=-sunos3
++ c90-unknown | c90-cray)
++ vendor=cray
++ os=${os:-unicos}
+ ;;
+- sun3os4)
+- basic_machine=m68k-sun
+- os=-sunos4
++ fx80-unknown)
++ vendor=alliant
+ ;;
+- sun4os3)
+- basic_machine=sparc-sun
+- os=-sunos3
++ romp-unknown)
++ vendor=ibm
+ ;;
+- sun4os4)
+- basic_machine=sparc-sun
+- os=-sunos4
++ mmix-unknown)
++ vendor=knuth
+ ;;
+- sun4sol2)
+- basic_machine=sparc-sun
+- os=-solaris2
++ microblaze-unknown | microblazeel-unknown)
++ vendor=xilinx
+ ;;
+- sun3 | sun3-*)
+- basic_machine=m68k-sun
++ rs6000-unknown)
++ vendor=ibm
+ ;;
+- sun4)
+- basic_machine=sparc-sun
++ vax-unknown)
++ vendor=dec
+ ;;
+- sun386 | sun386i | roadrunner)
+- basic_machine=i386-sun
++ pdp11-unknown)
++ vendor=dec
+ ;;
+- symmetry)
+- basic_machine=i386-sequent
+- os=-dynix
++ we32k-unknown)
++ vendor=att
+ ;;
+- tower | tower-32)
+- basic_machine=m68k-ncr
++ cydra-unknown)
++ vendor=cydrome
+ ;;
+- udi29k)
+- basic_machine=a29k-amd
+- os=-udi
+- ;;
+- ultra3)
+- basic_machine=a29k-nyu
+- os=-sym1
+- ;;
+- vaxv)
+- basic_machine=vax-dec
+- os=-sysv
+- ;;
+- vms)
+- basic_machine=vax-dec
+- os=-vms
+- ;;
+- vxworks960)
+- basic_machine=i960-wrs
+- os=-vxworks
+- ;;
+- vxworks68)
+- basic_machine=m68k-wrs
+- os=-vxworks
+- ;;
+- vxworks29k)
+- basic_machine=a29k-wrs
+- os=-vxworks
+- ;;
+- xmp)
+- basic_machine=xmp-cray
+- os=-unicos
++ i370-ibm*)
++ vendor=ibm
+ ;;
+- xps | xps100)
+- basic_machine=xps100-honeywell
++ orion-unknown)
++ vendor=highlevel
+ ;;
+- none)
+- basic_machine=none-none
+- os=-none
++ xps-unknown | xps100-unknown)
++ cpu=xps100
++ vendor=honeywell
++ ;;
++
++ # Here we normalize CPU types with a missing or matching vendor
++ dpx20-unknown | dpx20-bull)
++ cpu=rs6000
++ vendor=bull
++ os=${os:-bosx}
+ ;;
+
+-# Here we handle the default manufacturer of certain CPU types. It is in
+-# some cases the only manufacturer, in others, it is the most popular.
+- mips)
+- basic_machine=mips-mips
++ # Here we normalize CPU types irrespective of the vendor
++ amd64-*)
++ cpu=x86_64
++ ;;
++ blackfin-*)
++ cpu=bfin
++ os=linux
++ ;;
++ c54x-*)
++ cpu=tic54x
++ ;;
++ c55x-*)
++ cpu=tic55x
++ ;;
++ c6x-*)
++ cpu=tic6x
++ ;;
++ e500v[12]-*)
++ cpu=powerpc
++ os=$os"spe"
+ ;;
+- romp)
+- basic_machine=romp-ibm
++ mips3*-*)
++ cpu=mips64
+ ;;
+- rs6000)
+- basic_machine=rs6000-ibm
++ ms1-*)
++ cpu=mt
+ ;;
+- vax)
+- basic_machine=vax-dec
++ m68knommu-*)
++ cpu=m68k
++ os=linux
+ ;;
+- pdp11)
+- basic_machine=pdp11-dec
++ m9s12z-* | m68hcs12z-* | hcs12z-* | s12z-*)
++ cpu=s12z
+ ;;
+- we32k)
+- basic_machine=we32k-att
++ openrisc-*)
++ cpu=or32
+ ;;
+- sparc)
+- basic_machine=sparc-sun
++ parisc-*)
++ cpu=hppa
++ os=linux
+ ;;
+- cydra)
+- basic_machine=cydra-cydrome
++ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
++ cpu=i586
+ ;;
+- orion)
+- basic_machine=orion-highlevel
++ pentiumpro-* | p6-* | 6x86-* | athlon-* | athalon_*-*)
++ cpu=i686
+ ;;
+- orion105)
+- basic_machine=clipper-highlevel
++ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
++ cpu=i686
++ ;;
++ pentium4-*)
++ cpu=i786
++ ;;
++ pc98-*)
++ cpu=i386
++ ;;
++ ppc-* | ppcbe-*)
++ cpu=powerpc
++ ;;
++ ppcle-* | powerpclittle-*)
++ cpu=powerpcle
++ ;;
++ ppc64-*)
++ cpu=powerpc64
++ ;;
++ ppc64le-* | powerpc64little-*)
++ cpu=powerpc64le
++ ;;
++ sb1-*)
++ cpu=mipsisa64sb1
++ ;;
++ sb1el-*)
++ cpu=mipsisa64sb1el
+ ;;
++ sh5e[lb]-*)
++ cpu=`echo "$cpu" | sed 's/^\(sh.\)e\(.\)$/\1\2e/'`
++ ;;
++ spur-*)
++ cpu=spur
++ ;;
++ strongarm-* | thumb-*)
++ cpu=arm
++ ;;
++ tx39-*)
++ cpu=mipstx39
++ ;;
++ tx39el-*)
++ cpu=mipstx39el
++ ;;
++ x64-*)
++ cpu=x86_64
++ ;;
++ xscale-* | xscalee[bl]-*)
++ cpu=`echo "$cpu" | sed 's/^xscale/arm/'`
++ ;;
++
++ # Recognize the canonical CPU Types that limit and/or modify the
++ # company names they are paired with.
++ cr16-*)
++ os=${os:-elf}
++ ;;
++ crisv32-* | etraxfs*-*)
++ cpu=crisv32
++ vendor=axis
++ ;;
++ cris-* | etrax*-*)
++ cpu=cris
++ vendor=axis
++ ;;
++ crx-*)
++ os=${os:-elf}
++ ;;
++ neo-tandem)
++ cpu=neo
++ vendor=tandem
++ ;;
++ nse-tandem)
++ cpu=nse
++ vendor=tandem
++ ;;
++ nsr-tandem)
++ cpu=nsr
++ vendor=tandem
++ ;;
++ nsv-tandem)
++ cpu=nsv
++ vendor=tandem
++ ;;
++ nsx-tandem)
++ cpu=nsx
++ vendor=tandem
++ ;;
++ s390-*)
++ cpu=s390
++ vendor=ibm
++ ;;
++ s390x-*)
++ cpu=s390x
++ vendor=ibm
++ ;;
++ tile*-*)
++ os=${os:-linux-gnu}
++ ;;
++
+ *)
+- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+- exit 1
++ # Recognize the canonical CPU types that are allowed with any
++ # company name.
++ case $cpu in
++ 1750a | 580 \
++ | a29k \
++ | aarch64 | aarch64_be \
++ | abacus \
++ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] \
++ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] \
++ | alphapca5[67] | alpha64pca5[67] \
++ | am33_2.0 \
++ | amdgcn \
++ | arc | arceb \
++ | arm | arm[lb]e | arme[lb] | armv* \
++ | avr | avr32 \
++ | asmjs \
++ | ba \
++ | be32 | be64 \
++ | bfin | bs2000 \
++ | c[123]* | c30 | [cjt]90 | c4x \
++ | c8051 | clipper | craynv | csky | cydra \
++ | d10v | d30v | dlx | dsp16xx \
++ | e2k | elxsi | epiphany \
++ | f30[01] | f700 | fido | fr30 | frv | ft32 | fx80 \
++ | h8300 | h8500 \
++ | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
++ | hexagon \
++ | i370 | i*86 | i860 | i960 | ia16 | ia64 \
++ | ip2k | iq2000 \
++ | k1om \
++ | le32 | le64 \
++ | lm32 \
++ | m32c | m32r | m32rle \
++ | m5200 | m68000 | m680[012346]0 | m68360 | m683?2 | m68k \
++ | m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x \
++ | m88110 | m88k | maxq | mb | mcore | mep | metag \
++ | microblaze | microblazeel \
++ | mips | mipsbe | mipseb | mipsel | mipsle \
++ | mips16 \
++ | mips64 | mips64eb | mips64el \
++ | mips64octeon | mips64octeonel \
++ | mips64orion | mips64orionel \
++ | mips64r5900 | mips64r5900el \
++ | mips64vr | mips64vrel \
++ | mips64vr4100 | mips64vr4100el \
++ | mips64vr4300 | mips64vr4300el \
++ | mips64vr5000 | mips64vr5000el \
++ | mips64vr5900 | mips64vr5900el \
++ | mipsisa32 | mipsisa32el \
++ | mipsisa32r2 | mipsisa32r2el \
++ | mipsisa32r6 | mipsisa32r6el \
++ | mipsisa64 | mipsisa64el \
++ | mipsisa64r2 | mipsisa64r2el \
++ | mipsisa64r6 | mipsisa64r6el \
++ | mipsisa64sb1 | mipsisa64sb1el \
++ | mipsisa64sr71k | mipsisa64sr71kel \
++ | mipsr5900 | mipsr5900el \
++ | mipstx39 | mipstx39el \
++ | mmix \
++ | mn10200 | mn10300 \
++ | moxie \
++ | mt \
++ | msp430 \
++ | nds32 | nds32le | nds32be \
++ | nfp \
++ | nios | nios2 | nios2eb | nios2el \
++ | none | np1 | ns16k | ns32k | nvptx \
++ | open8 \
++ | or1k* \
++ | or32 \
++ | orion \
++ | picochip \
++ | pdp10 | pdp11 | pj | pjl | pn | power \
++ | powerpc | powerpc64 | powerpc64le | powerpcle | powerpcspe \
++ | pru \
++ | pyramid \
++ | riscv | riscv32 | riscv64 \
++ | rl78 | romp | rs6000 | rx \
++ | score \
++ | sh | shl \
++ | sh[1234] | sh[24]a | sh[24]ae[lb] | sh[23]e | she[lb] | sh[lb]e \
++ | sh[1234]e[lb] | sh[12345][lb]e | sh[23]ele | sh64 | sh64le \
++ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet \
++ | sparclite \
++ | sparcv8 | sparcv9 | sparcv9b | sparcv9v | sv1 | sx* \
++ | spu \
++ | tahoe \
++ | tic30 | tic4x | tic54x | tic55x | tic6x | tic80 \
++ | tron \
++ | ubicom32 \
++ | v70 | v850 | v850e | v850e1 | v850es | v850e2 | v850e2v3 \
++ | vax \
++ | visium \
++ | w65 \
++ | wasm32 | wasm64 \
++ | we32k \
++ | x86 | x86_64 | xc16x | xgate | xps100 \
++ | xstormy16 | xtensa* \
++ | ymp \
++ | z8k | z80)
++ ;;
++
++ *)
++ echo Invalid configuration \`"$1"\': machine \`"$cpu-$vendor"\' not recognized 1>&2
++ exit 1
++ ;;
++ esac
+ ;;
+ esac
+
+ # Here we canonicalize certain aliases for manufacturers.
+-case $basic_machine in
+- *-digital*)
+- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
++case $vendor in
++ digital*)
++ vendor=dec
+ ;;
+- *-commodore*)
+- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
++ commodore*)
++ vendor=cbm
+ ;;
+ *)
+ ;;
+@@ -612,96 +1278,246 @@ esac
+
+ # Decode manufacturer-specific aliases for certain operating systems.
+
+-if [ x"$os" != x"" ]
++if [ x$os != x ]
+ then
+ case $os in
+- # -solaris* is a basic system type, with this one exception.
+- -solaris1 | -solaris1.*)
++ # First match some system type aliases that might get confused
++ # with valid system types.
++ # solaris* is a basic system type, with this one exception.
++ auroraux)
++ os=auroraux
++ ;;
++ bluegene*)
++ os=cnk
++ ;;
++ solaris1 | solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+- -solaris)
+- os=-solaris2
++ solaris)
++ os=solaris2
++ ;;
++ unixware*)
++ os=sysv4.2uw
++ ;;
++ gnu/linux*)
++ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
++ ;;
++ # es1800 is here to avoid being matched by es* (a different OS)
++ es1800*)
++ os=ose
++ ;;
++ # Some version numbers need modification
++ chorusos*)
++ os=chorusos
++ ;;
++ isc)
++ os=isc2.2
++ ;;
++ sco6)
++ os=sco5v6
++ ;;
++ sco5)
++ os=sco3.2v5
++ ;;
++ sco4)
++ os=sco3.2v4
++ ;;
++ sco3.2.[4-9]*)
++ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
++ ;;
++ sco3.2v[4-9]* | sco5v6*)
++ # Don't forget version if it is 3.2v4 or newer.
++ ;;
++ scout)
++ # Don't match below
+ ;;
+- -unixware* | svr4*)
+- os=-sysv4
++ sco*)
++ os=sco3.2v2
+ ;;
+- -gnu/linux*)
+- os=`echo $os | sed -e 's|gnu/linux|linux|'`
++ psos*)
++ os=psos
+ ;;
+- # First accept the basic system types.
++ # Now accept the basic system types.
+ # The portable systems comes first.
+- # Each alternative MUST END IN A *, to match a version number.
+- # -sysv* is not here because it comes later, after sysvr4.
+- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+- | -vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[345]* \
+- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+- | -amigados* | -msdos* | -newsos* | -unicos* | -aos* \
+- | -nindy* | -vxworks* | -ebmon* | -hms* | -mvs* | -clix* \
+- | -riscos* | -linux* | -uniplus* | -iris* | -rtu* | -xenix* \
+- | -hiux* | -386bsd* | -netbsd* | -freebsd* | -riscix* \
+- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \
+- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+- | -udi* | -eabi* | -lites* )
++ # Each alternative MUST end in a * to match a version number.
++ # sysv* is not here because it comes later, after sysvr4.
++ gnu* | bsd* | mach* | minix* | genix* | ultrix* | irix* \
++ | *vms* | esix* | aix* | cnk* | sunos | sunos[34]*\
++ | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \
++ | sym* | kopensolaris* | plan9* \
++ | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \
++ | aos* | aros* | cloudabi* | sortix* \
++ | nindy* | vxsim* | vxworks* | ebmon* | hms* | mvs* \
++ | clix* | riscos* | uniplus* | iris* | isc* | rtu* | xenix* \
++ | knetbsd* | mirbsd* | netbsd* \
++ | bitrig* | openbsd* | solidbsd* | libertybsd* \
++ | ekkobsd* | kfreebsd* | freebsd* | riscix* | lynxos* \
++ | bosx* | nextstep* | cxux* | aout* | elf* | oabi* \
++ | ptx* | coff* | ecoff* | winnt* | domain* | vsta* \
++ | udi* | eabi* | lites* | ieee* | go32* | aux* | hcos* \
++ | chorusrdb* | cegcc* | glidix* \
++ | cygwin* | msys* | pe* | moss* | proelf* | rtems* \
++ | midipix* | mingw32* | mingw64* | linux-gnu* | linux-android* \
++ | linux-newlib* | linux-musl* | linux-uclibc* \
++ | uxpv* | beos* | mpeix* | udk* | moxiebox* \
++ | interix* | uwin* | mks* | rhapsody* | darwin* \
++ | openstep* | oskit* | conix* | pw32* | nonstopux* \
++ | storm-chaos* | tops10* | tenex* | tops20* | its* \
++ | os2* | vos* | palmos* | uclinux* | nucleus* \
++ | morphos* | superux* | rtmk* | windiss* \
++ | powermax* | dnix* | nx6 | nx7 | sei* | dragonfly* \
++ | skyos* | haiku* | rdos* | toppers* | drops* | es* \
++ | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \
++ | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+- -sunos5*)
+- os=`echo $os | sed -e 's|sunos5|solaris2|'`
++ qnx*)
++ case $cpu in
++ x86 | i*86)
++ ;;
++ *)
++ os=nto-$os
++ ;;
++ esac
++ ;;
++ hiux*)
++ os=hiuxwe2
++ ;;
++ nto-qnx*)
++ ;;
++ nto*)
++ os=`echo $os | sed -e 's|nto|nto-qnx|'`
++ ;;
++ sim | xray | os68k* | v88r* \
++ | windows* | osx | abug | netware* | os9* \
++ | macos* | mpw* | magic* | mmixware* | mon960* | lnews*)
++ ;;
++ linux-dietlibc)
++ os=linux-dietlibc
++ ;;
++ linux*)
++ os=`echo $os | sed -e 's|linux|linux-gnu|'`
++ ;;
++ lynx*178)
++ os=lynxos178
++ ;;
++ lynx*5)
++ os=lynxos5
++ ;;
++ lynx*)
++ os=lynxos
++ ;;
++ mac*)
++ os=`echo "$os" | sed -e 's|mac|macos|'`
++ ;;
++ opened*)
++ os=openedition
++ ;;
++ os400*)
++ os=os400
++ ;;
++ sunos5*)
++ os=`echo "$os" | sed -e 's|sunos5|solaris2|'`
++ ;;
++ sunos6*)
++ os=`echo "$os" | sed -e 's|sunos6|solaris3|'`
++ ;;
++ wince*)
++ os=wince
++ ;;
++ utek*)
++ os=bsd
++ ;;
++ dynix*)
++ os=bsd
++ ;;
++ acis*)
++ os=aos
+ ;;
+- -sunos6*)
+- os=`echo $os | sed -e 's|sunos6|solaris3|'`
++ atheos*)
++ os=atheos
+ ;;
+- -osfrose*)
+- os=-osfrose
++ syllable*)
++ os=syllable
+ ;;
+- -osf*)
+- os=-osf
++ 386bsd)
++ os=bsd
+ ;;
+- -utek*)
+- os=-bsd
++ ctix* | uts*)
++ os=sysv
+ ;;
+- -dynix*)
+- os=-bsd
++ nova*)
++ os=rtmk-nova
+ ;;
+- -acis*)
+- os=-aos
++ ns2)
++ os=nextstep2
+ ;;
+- -ctix* | -uts*)
+- os=-sysv
++ nsk*)
++ os=nsk
+ ;;
+ # Preserve the version number of sinix5.
+- -sinix5.*)
++ sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+- -sinix*)
+- os=-sysv4
++ sinix*)
++ os=sysv4
+ ;;
+- -triton*)
+- os=-sysv3
++ tpf*)
++ os=tpf
+ ;;
+- -oss*)
+- os=-sysv3
++ triton*)
++ os=sysv3
+ ;;
+- -svr4)
+- os=-sysv4
++ oss*)
++ os=sysv3
+ ;;
+- -svr3)
+- os=-sysv3
++ svr4*)
++ os=sysv4
+ ;;
+- -sysvr4)
+- os=-sysv4
++ svr3)
++ os=sysv3
+ ;;
+- # This must come after -sysvr4.
+- -sysv*)
++ sysvr4)
++ os=sysv4
+ ;;
+- -xenix)
+- os=-xenix
++ # This must come after sysvr4.
++ sysv*)
+ ;;
+- -none)
++ ose*)
++ os=ose
++ ;;
++ *mint | mint[0-9]* | *MiNT | MiNT[0-9]*)
++ os=mint
++ ;;
++ zvmoe)
++ os=zvmoe
++ ;;
++ dicos*)
++ os=dicos
++ ;;
++ pikeos*)
++ # Until real need of OS specific support for
++ # particular features comes up, bare metal
++ # configurations are quite functional.
++ case $cpu in
++ arm*)
++ os=eabi
++ ;;
++ *)
++ os=elf
++ ;;
++ esac
++ ;;
++ nacl*)
++ ;;
++ ios)
++ ;;
++ none)
++ ;;
++ *-eabi)
+ ;;
+ *)
+- # Get rid of the `-' at the beginning of $os.
+- os=`echo $os | sed 's/[^-]*-//'`
+- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
++ echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2
+ exit 1
+ ;;
+ esac
+@@ -717,151 +1533,266 @@ else
+ # will signal an error saying that MANUFACTURER isn't an operating
+ # system, and we'll never get to this point.
+
+-case $basic_machine in
++case $cpu-$vendor in
++ score-*)
++ os=elf
++ ;;
++ spu-*)
++ os=elf
++ ;;
+ *-acorn)
+- os=-riscix1.2
++ os=riscix1.2
++ ;;
++ arm*-rebel)
++ os=linux
+ ;;
+ arm*-semi)
+- os=-aout
++ os=aout
++ ;;
++ c4x-* | tic4x-*)
++ os=coff
++ ;;
++ c8051-*)
++ os=elf
++ ;;
++ clipper-intergraph)
++ os=clix
++ ;;
++ hexagon-*)
++ os=elf
+ ;;
+- pdp11-*)
+- os=-none
++ tic54x-*)
++ os=coff
++ ;;
++ tic55x-*)
++ os=coff
++ ;;
++ tic6x-*)
++ os=coff
++ ;;
++ # This must come before the *-dec entry.
++ pdp10-*)
++ os=tops20
++ ;;
++ pdp11-*)
++ os=none
+ ;;
+ *-dec | vax-*)
+- os=-ultrix4.2
++ os=ultrix4.2
+ ;;
+ m68*-apollo)
+- os=-domain
++ os=domain
+ ;;
+ i386-sun)
+- os=-sunos4.0.2
++ os=sunos4.0.2
+ ;;
+ m68000-sun)
+- os=-sunos3
+- # This also exists in the configure program, but was not the
+- # default.
+- # os=-sunos4
++ os=sunos3
++ ;;
++ m68*-cisco)
++ os=aout
++ ;;
++ mep-*)
++ os=elf
++ ;;
++ mips*-cisco)
++ os=elf
++ ;;
++ mips*-*)
++ os=elf
++ ;;
++ or32-*)
++ os=coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+- os=-sysv3
++ os=sysv3
+ ;;
+ sparc-* | *-sun)
+- os=-sunos4.1.1
++ os=sunos4.1.1
++ ;;
++ pru-*)
++ os=elf
++ ;;
++ *-be)
++ os=beos
+ ;;
+ *-ibm)
+- os=-aix
++ os=aix
++ ;;
++ *-knuth)
++ os=mmixware
++ ;;
++ *-wec)
++ os=proelf
++ ;;
++ *-winbond)
++ os=proelf
++ ;;
++ *-oki)
++ os=proelf
+ ;;
+ *-hp)
+- os=-hpux
++ os=hpux
+ ;;
+ *-hitachi)
+- os=-hiux
++ os=hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+- os=-sysv
++ os=sysv
+ ;;
+ *-cbm)
+- os=-amigados
++ os=amigaos
+ ;;
+ *-dg)
+- os=-dgux
++ os=dgux
+ ;;
+ *-dolphin)
+- os=-sysv3
++ os=sysv3
+ ;;
+ m68k-ccur)
+- os=-rtu
++ os=rtu
+ ;;
+ m88k-omron*)
+- os=-luna
++ os=luna
++ ;;
++ *-next)
++ os=nextstep
+ ;;
+ *-sequent)
+- os=-ptx
++ os=ptx
+ ;;
+ *-crds)
+- os=-unos
++ os=unos
+ ;;
+ *-ns)
+- os=-genix
++ os=genix
+ ;;
+ i370-*)
+- os=-mvs
+- ;;
+- *-next)
+- os=-nextstep3
++ os=mvs
+ ;;
+- *-gould)
+- os=-sysv
++ *-gould)
++ os=sysv
+ ;;
+- *-highlevel)
+- os=-bsd
++ *-highlevel)
++ os=bsd
+ ;;
+ *-encore)
+- os=-bsd
++ os=bsd
+ ;;
+- *-sgi)
+- os=-irix
++ *-sgi)
++ os=irix
+ ;;
+- *-siemens)
+- os=-sysv4
++ *-siemens)
++ os=sysv4
+ ;;
+ *-masscomp)
+- os=-rtu
++ os=rtu
++ ;;
++ f30[01]-fujitsu | f700-fujitsu)
++ os=uxpv
++ ;;
++ *-rom68k)
++ os=coff
++ ;;
++ *-*bug)
++ os=coff
++ ;;
++ *-apple)
++ os=macos
++ ;;
++ *-atari*)
++ os=mint
++ ;;
++ *-wrs)
++ os=vxworks
+ ;;
+ *)
+- os=-none
++ os=none
+ ;;
+ esac
+ fi
+
+ # Here we handle the case where we know the os, and the CPU type, but not the
+ # manufacturer. We pick the logical manufacturer.
+-vendor=unknown
+-case $basic_machine in
+- *-unknown)
++case $vendor in
++ unknown)
+ case $os in
+- -riscix*)
++ riscix*)
+ vendor=acorn
+ ;;
+- -sunos*)
++ sunos*)
+ vendor=sun
+ ;;
+- -lynxos*)
+- vendor=lynx
+- ;;
+- -aix*)
++ cnk*|-aix*)
+ vendor=ibm
+ ;;
+- -hpux*)
++ beos*)
++ vendor=be
++ ;;
++ hpux*)
++ vendor=hp
++ ;;
++ mpeix*)
+ vendor=hp
+ ;;
+- -hiux*)
++ hiux*)
+ vendor=hitachi
+ ;;
+- -unos*)
++ unos*)
+ vendor=crds
+ ;;
+- -dgux*)
++ dgux*)
+ vendor=dg
+ ;;
+- -luna*)
++ luna*)
+ vendor=omron
+ ;;
+- -genix*)
++ genix*)
+ vendor=ns
+ ;;
+- -mvs*)
++ clix*)
++ vendor=intergraph
++ ;;
++ mvs* | opened*)
+ vendor=ibm
+ ;;
+- -ptx*)
++ os400*)
++ vendor=ibm
++ ;;
++ ptx*)
+ vendor=sequent
+ ;;
+- -vxworks*)
++ tpf*)
++ vendor=ibm
++ ;;
++ vxsim* | vxworks* | windiss*)
+ vendor=wrs
+ ;;
++ aux*)
++ vendor=apple
++ ;;
++ hms*)
++ vendor=hitachi
++ ;;
++ mpw* | macos*)
++ vendor=apple
++ ;;
++ *mint | mint[0-9]* | *MiNT | MiNT[0-9]*)
++ vendor=atari
++ ;;
++ vos*)
++ vendor=stratus
++ ;;
+ esac
+- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+ esac
+
+-echo $basic_machine$os
++echo "$cpu-$vendor-$os"
++exit
++
++# Local variables:
++# eval: (add-hook 'before-save-hook 'time-stamp)
++# time-stamp-start: "timestamp='"
++# time-stamp-format: "%:y-%02m-%02d"
++# time-stamp-end: "'"
++# End:
+diff -uprN clean/lrzsz-0.12.20/configure lrzsz-0.12.20/configure
+--- clean/lrzsz-0.12.20/configure 1998-12-30 07:50:18.000000000 +0000
++++ lrzsz-0.12.20/configure 2019-11-26 11:37:45.000000000 +0000
+@@ -1,40 +1,749 @@
+ #! /bin/sh
+-
+ # Guess values for system-dependent variables and create Makefiles.
+-# Generated automatically using autoconf version 2.12
+-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
++# Generated by GNU Autoconf 2.69.
++#
++#
++# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
++#
+ #
+ # This configure script is free software; the Free Software Foundation
+ # gives unlimited permission to copy, distribute and modify it.
++## -------------------- ##
++## M4sh Initialization. ##
++## -------------------- ##
++
++# Be more Bourne compatible
++DUALCASE=1; export DUALCASE # for MKS sh
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
++ emulate sh
++ NULLCMD=:
++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
++ setopt NO_GLOB_SUBST
++else
++ case `(set -o) 2>/dev/null` in #(
++ *posix*) :
++ set -o posix ;; #(
++ *) :
++ ;;
++esac
++fi
++
++
++as_nl='
++'
++export as_nl
++as_echo='printf %s\n'
++as_echo_n='printf %s'
++
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ PATH_SEPARATOR=:
++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
++ PATH_SEPARATOR=';'
++ }
++fi
++
++
++# IFS
++# We need space, tab and new line, in precisely that order. Quoting is
++# there to prevent editors from complaining about space-tab.
++# (If _AS_PATH_WALK were called with IFS unset, it would disable word
++# splitting by setting IFS to empty value.)
++IFS=" "" $as_nl"
++
++# Find who we are. Look in the path if we contain no directory separator.
++as_myself=
++case $0 in #((
++ *[\\/]* ) as_myself=$0 ;;
++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
++ done
++IFS=$as_save_IFS
++
++ ;;
++esac
++# We did not find ourselves, most probably we were run as `sh COMMAND'
++# in which case we are not to be found in the path.
++if test "x$as_myself" = x; then
++ as_myself=$0
++fi
++if test ! -f "$as_myself"; then
++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
++ exit 1
++fi
++
++# Unset variables that we do not need and which cause bugs (e.g. in
++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
++# suppresses any "Segmentation fault" message there. '((' could
++# trigger a bug in pdksh 5.2.14.
++for as_var in BASH_ENV ENV MAIL MAILPATH
++do eval test x\${$as_var+set} = xset \
++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
++done
++PS1='$ '
++PS2='> '
++PS4='+ '
++
++# NLS nuisances.
++LC_ALL=C
++export LC_ALL
++LANGUAGE=C
++export LANGUAGE
++
++# CDPATH.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++# Use a proper internal environment variable to ensure we don't fall
++ # into an infinite loop, continuously re-executing ourselves.
++ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
++ _as_can_reexec=no; export _as_can_reexec;
++ # We cannot yet assume a decent shell, so we have to provide a
++# neutralization value for shells without unset; and this also
++# works around shells that cannot unset nonexistent variables.
++# Preserve -v and -x to the replacement shell.
++BASH_ENV=/dev/null
++ENV=/dev/null
++(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
++case $- in # ((((
++ *v*x* | *x*v* ) as_opts=-vx ;;
++ *v* ) as_opts=-v ;;
++ *x* ) as_opts=-x ;;
++ * ) as_opts= ;;
++esac
++exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
++# Admittedly, this is quite paranoid, since all the known shells bail
++# out after a failed `exec'.
++$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
++as_fn_exit 255
++ fi
++ # We don't want this to propagate to other subprocesses.
++ { _as_can_reexec=; unset _as_can_reexec;}
++if test "x$CONFIG_SHELL" = x; then
++ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
++ emulate sh
++ NULLCMD=:
++ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '\${1+\"\$@\"}'='\"\$@\"'
++ setopt NO_GLOB_SUBST
++else
++ case \`(set -o) 2>/dev/null\` in #(
++ *posix*) :
++ set -o posix ;; #(
++ *) :
++ ;;
++esac
++fi
++"
++ as_required="as_fn_return () { (exit \$1); }
++as_fn_success () { as_fn_return 0; }
++as_fn_failure () { as_fn_return 1; }
++as_fn_ret_success () { return 0; }
++as_fn_ret_failure () { return 1; }
++
++exitcode=0
++as_fn_success || { exitcode=1; echo as_fn_success failed.; }
++as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
++as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
++as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
++if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
++
++else
++ exitcode=1; echo positional parameters were not saved.
++fi
++test x\$exitcode = x0 || exit 1
++test -x / || exit 1"
++ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
++ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
++ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
++ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
++test \$(( 1 + 1 )) = 2 || exit 1"
++ if (eval "$as_required") 2>/dev/null; then :
++ as_have_required=yes
++else
++ as_have_required=no
++fi
++ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
++
++else
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++as_found=false
++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ as_found=:
++ case $as_dir in #(
++ /*)
++ for as_base in bash sh ksh sh5; do
++ # Try only shells that exist, to save several forks.
++ as_shell=$as_dir/$as_base
++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
++ CONFIG_SHELL=$as_shell as_have_required=yes
++ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
++ break 2
++fi
++fi
++ done;;
++ esac
++ as_found=false
++done
++$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
++ CONFIG_SHELL=$SHELL as_have_required=yes
++fi; }
++IFS=$as_save_IFS
++
++
++ if test "x$CONFIG_SHELL" != x; then :
++ export CONFIG_SHELL
++ # We cannot yet assume a decent shell, so we have to provide a
++# neutralization value for shells without unset; and this also
++# works around shells that cannot unset nonexistent variables.
++# Preserve -v and -x to the replacement shell.
++BASH_ENV=/dev/null
++ENV=/dev/null
++(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
++case $- in # ((((
++ *v*x* | *x*v* ) as_opts=-vx ;;
++ *v* ) as_opts=-v ;;
++ *x* ) as_opts=-x ;;
++ * ) as_opts= ;;
++esac
++exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
++# Admittedly, this is quite paranoid, since all the known shells bail
++# out after a failed `exec'.
++$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
++exit 255
++fi
++
++ if test x$as_have_required = xno; then :
++ $as_echo "$0: This script requires a shell more modern than all"
++ $as_echo "$0: the shells that I found on your system."
++ if test x${ZSH_VERSION+set} = xset ; then
++ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
++ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
++ else
++ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
++$0: including any error possibly output before this
++$0: message. Then install a modern shell, or manually run
++$0: the script under such a shell if you do have one."
++ fi
++ exit 1
++fi
++fi
++fi
++SHELL=${CONFIG_SHELL-/bin/sh}
++export SHELL
++# Unset more variables known to interfere with behavior of common tools.
++CLICOLOR_FORCE= GREP_OPTIONS=
++unset CLICOLOR_FORCE GREP_OPTIONS
++
++## --------------------- ##
++## M4sh Shell Functions. ##
++## --------------------- ##
++# as_fn_unset VAR
++# ---------------
++# Portably unset VAR.
++as_fn_unset ()
++{
++ { eval $1=; unset $1;}
++}
++as_unset=as_fn_unset
+
+-# Defaults:
+-ac_help=
++# as_fn_set_status STATUS
++# -----------------------
++# Set $? to STATUS, without forking.
++as_fn_set_status ()
++{
++ return $1
++} # as_fn_set_status
++
++# as_fn_exit STATUS
++# -----------------
++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
++as_fn_exit ()
++{
++ set +e
++ as_fn_set_status $1
++ exit $1
++} # as_fn_exit
++
++# as_fn_mkdir_p
++# -------------
++# Create "$as_dir" as a directory, including parents if necessary.
++as_fn_mkdir_p ()
++{
++
++ case $as_dir in #(
++ -*) as_dir=./$as_dir;;
++ esac
++ test -d "$as_dir" || eval $as_mkdir_p || {
++ as_dirs=
++ while :; do
++ case $as_dir in #(
++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
++ *) as_qdir=$as_dir;;
++ esac
++ as_dirs="'$as_qdir' $as_dirs"
++ as_dir=`$as_dirname -- "$as_dir" ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_dir" : 'X\(//\)[^/]' \| \
++ X"$as_dir" : 'X\(//\)$' \| \
++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$as_dir" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ test -d "$as_dir" && break
++ done
++ test -z "$as_dirs" || eval "mkdir $as_dirs"
++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
++
++
++} # as_fn_mkdir_p
++
++# as_fn_executable_p FILE
++# -----------------------
++# Test if FILE is an executable regular file.
++as_fn_executable_p ()
++{
++ test -f "$1" && test -x "$1"
++} # as_fn_executable_p
++# as_fn_append VAR VALUE
++# ----------------------
++# Append the text in VALUE to the end of the definition contained in VAR. Take
++# advantage of any shell optimizations that allow amortized linear growth over
++# repeated appends, instead of the typical quadratic growth present in naive
++# implementations.
++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
++ eval 'as_fn_append ()
++ {
++ eval $1+=\$2
++ }'
++else
++ as_fn_append ()
++ {
++ eval $1=\$$1\$2
++ }
++fi # as_fn_append
++
++# as_fn_arith ARG...
++# ------------------
++# Perform arithmetic evaluation on the ARGs, and store the result in the
++# global $as_val. Take advantage of shells that can avoid forks. The arguments
++# must be portable across $(()) and expr.
++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
++ eval 'as_fn_arith ()
++ {
++ as_val=$(( $* ))
++ }'
++else
++ as_fn_arith ()
++ {
++ as_val=`expr "$@" || test $? -eq 1`
++ }
++fi # as_fn_arith
++
++
++# as_fn_error STATUS ERROR [LINENO LOG_FD]
++# ----------------------------------------
++# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
++# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
++# script with STATUS, using 1 if that was 0.
++as_fn_error ()
++{
++ as_status=$1; test $as_status -eq 0 && as_status=1
++ if test "$4"; then
++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
++ fi
++ $as_echo "$as_me: error: $2" >&2
++ as_fn_exit $as_status
++} # as_fn_error
++
++if expr a : '\(a\)' >/dev/null 2>&1 &&
++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
++ as_basename=basename
++else
++ as_basename=false
++fi
++
++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
++ as_dirname=dirname
++else
++ as_dirname=false
++fi
++
++as_me=`$as_basename -- "$0" ||
++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X/"$0" |
++ sed '/^.*\/\([^/][^/]*\)\/*$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++
++# Avoid depending upon Character Ranges.
++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
++as_cr_digits='0123456789'
++as_cr_alnum=$as_cr_Letters$as_cr_digits
++
++
++ as_lineno_1=$LINENO as_lineno_1a=$LINENO
++ as_lineno_2=$LINENO as_lineno_2a=$LINENO
++ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
++ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
++ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
++ sed -n '
++ p
++ /[$]LINENO/=
++ ' <$as_myself |
++ sed '
++ s/[$]LINENO.*/&-/
++ t lineno
++ b
++ :lineno
++ N
++ :loop
++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
++ t loop
++ s/-\n.*//
++ ' >$as_me.lineno &&
++ chmod +x "$as_me.lineno" ||
++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
++
++ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
++ # already done that, so ensure we don't try to do so again and fall
++ # in an infinite loop. This has already happened in practice.
++ _as_can_reexec=no; export _as_can_reexec
++ # Don't try to exec as it changes $[0], causing all sort of problems
++ # (the dirname of $[0] is not the place where we might find the
++ # original and so on. Autoconf is especially sensitive to this).
++ . "./$as_me.lineno"
++ # Exit status is that of the last command.
++ exit
++}
++
++ECHO_C= ECHO_N= ECHO_T=
++case `echo -n x` in #(((((
++-n*)
++ case `echo 'xy\c'` in
++ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
++ xy) ECHO_C='\c';;
++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
++ ECHO_T=' ';;
++ esac;;
++*)
++ ECHO_N='-n';;
++esac
++
++rm -f conf$$ conf$$.exe conf$$.file
++if test -d conf$$.dir; then
++ rm -f conf$$.dir/conf$$.file
++else
++ rm -f conf$$.dir
++ mkdir conf$$.dir 2>/dev/null
++fi
++if (echo >conf$$.file) 2>/dev/null; then
++ if ln -s conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s='ln -s'
++ # ... but there are two gotchas:
++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
++ # In both cases, we have to default to `cp -pR'.
++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
++ as_ln_s='cp -pR'
++ elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
++ else
++ as_ln_s='cp -pR'
++ fi
++else
++ as_ln_s='cp -pR'
++fi
++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
++rmdir conf$$.dir 2>/dev/null
++
++if mkdir -p . 2>/dev/null; then
++ as_mkdir_p='mkdir -p "$as_dir"'
++else
++ test -d ./-p && rmdir ./-p
++ as_mkdir_p=false
++fi
++
++as_test_x='test -x'
++as_executable_p=as_fn_executable_p
++
++# Sed expression to map a string onto a valid CPP name.
++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
++
++# Sed expression to map a string onto a valid variable name.
++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
++
++
++test -n "$DJDIR" || exec 7<&0 </dev/null
++exec 6>&1
++
++# Name of the host.
++# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
++# so uname gets run too.
++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
++
++#
++# Initializations.
++#
+ ac_default_prefix=/usr/local
+-# Any additions from configure.in:
+-ac_help="$ac_help
+---disable-timesync exclude support for timesync protocol"
+-ac_help="$ac_help
+---enable-pubdir=/path include support for a public writeable directory"
+-ac_help="$ac_help
+---disable-mkdir disable support for creating directories (lrz)"
+-ac_help="$ac_help
+---enable-syslog=FACILITY,{force,default,optional} include syslogsupport"
+-ac_help="$ac_help
+- --disable-nls do not use Native Language Support"
+-ac_help="$ac_help
+- --with-included-gettext use the GNU gettext library included here"
+-ac_help="$ac_help
+- --with-catgets use catgets functions if available"
++ac_clean_files=
++ac_config_libobj_dir=.
++LIBOBJS=
++cross_compiling=no
++subdirs=
++MFLAGS=
++MAKEFLAGS=
++
++# Identity of this package.
++PACKAGE_NAME=
++PACKAGE_TARNAME=
++PACKAGE_VERSION=
++PACKAGE_STRING=
++PACKAGE_BUGREPORT=
++PACKAGE_URL=
++
++ac_unique_file="src/crctab.c"
++# Factoring default headers for most tests.
++ac_includes_default="\
++#include <stdio.h>
++#ifdef HAVE_SYS_TYPES_H
++# include <sys/types.h>
++#endif
++#ifdef HAVE_SYS_STAT_H
++# include <sys/stat.h>
++#endif
++#ifdef STDC_HEADERS
++# include <stdlib.h>
++# include <stddef.h>
++#else
++# ifdef HAVE_STDLIB_H
++# include <stdlib.h>
++# endif
++#endif
++#ifdef HAVE_STRING_H
++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
++# include <memory.h>
++# endif
++# include <string.h>
++#endif
++#ifdef HAVE_STRINGS_H
++# include <strings.h>
++#endif
++#ifdef HAVE_INTTYPES_H
++# include <inttypes.h>
++#endif
++#ifdef HAVE_STDINT_H
++# include <stdint.h>
++#endif
++#ifdef HAVE_UNISTD_H
++# include <unistd.h>
++#endif"
++
++ac_header_list=
++gt_needs=
++ac_subst_vars='am__EXEEXT_FALSE
++am__EXEEXT_TRUE
++LTLIBOBJS
++POSUB
++LTLIBINTL
++LIBINTL
++INTLLIBS
++LTLIBICONV
++LIBICONV
++INTL_MACOSX_LIBS
++host_os
++host_vendor
++host_cpu
++host
++build_os
++build_vendor
++build_cpu
++build
++XGETTEXT_EXTRA_OPTIONS
++MSGMERGE_FOR_MSGFMT_OPTION
++MSGMERGE
++XGETTEXT_015
++XGETTEXT
++GMSGFMT_015
++GMSGFMT
++MSGFMT
++GETTEXT_MACRO_VERSION
++USE_NLS
++SED
++LIBOBJS
++LIBOBJS
++ALLOCA
++RANLIB
++EGREP
++GREP
++CPP
++am__fastdepCC_FALSE
++am__fastdepCC_TRUE
++CCDEPMODE
++am__nodep
++AMDEPBACKSLASH
++AMDEP_FALSE
++AMDEP_TRUE
++am__include
++DEPDIR
++OBJEXT
++EXEEXT
++ac_ct_CC
++CPPFLAGS
++LDFLAGS
++CFLAGS
++CC
++ENABLE_TIMESYNC
++AM_BACKSLASH
++AM_DEFAULT_VERBOSITY
++AM_DEFAULT_V
++AM_V
++am__untar
++am__tar
++AMTAR
++am__leading_dot
++SET_MAKE
++AWK
++mkdir_p
++MKDIR_P
++INSTALL_STRIP_PROGRAM
++STRIP
++install_sh
++MAKEINFO
++AUTOHEADER
++AUTOMAKE
++AUTOCONF
++ACLOCAL
++VERSION
++PACKAGE
++CYGPATH_W
++am__isrc
++INSTALL_DATA
++INSTALL_SCRIPT
++INSTALL_PROGRAM
++target_alias
++host_alias
++build_alias
++LIBS
++ECHO_T
++ECHO_N
++ECHO_C
++DEFS
++mandir
++localedir
++libdir
++psdir
++pdfdir
++dvidir
++htmldir
++infodir
++docdir
++oldincludedir
++includedir
++localstatedir
++sharedstatedir
++sysconfdir
++datadir
++datarootdir
++libexecdir
++sbindir
++bindir
++program_transform_name
++prefix
++exec_prefix
++PACKAGE_URL
++PACKAGE_BUGREPORT
++PACKAGE_STRING
++PACKAGE_VERSION
++PACKAGE_TARNAME
++PACKAGE_NAME
++PATH_SEPARATOR
++SHELL
++am__quote'
++ac_subst_files=''
++ac_user_opts='
++enable_option_checking
++enable_silent_rules
++enable_timesync
++enable_pubdir
++enable_mkdir
++enable_syslog
++enable_dependency_tracking
++enable_nls
++with_gnu_ld
++enable_rpath
++with_libiconv_prefix
++with_libintl_prefix
++'
++ ac_precious_vars='build_alias
++host_alias
++target_alias
++CC
++CFLAGS
++LDFLAGS
++LIBS
++CPPFLAGS
++CPP'
++
+
+ # Initialize some variables set by options.
++ac_init_help=
++ac_init_version=false
++ac_unrecognized_opts=
++ac_unrecognized_sep=
+ # The variables have the same names as the options, with
+ # dashes changed to underlines.
+-build=NONE
+-cache_file=./config.cache
++cache_file=/dev/null
+ exec_prefix=NONE
+-host=NONE
+ no_create=
+-nonopt=NONE
+ no_recursion=
+ prefix=NONE
+ program_prefix=NONE
+@@ -43,93 +752,132 @@ program_transform_name=s,x,x,
+ silent=
+ site=
+ srcdir=
+-target=NONE
+ verbose=
+ x_includes=NONE
+ x_libraries=NONE
++
++# Installation directory options.
++# These are left unexpanded so users can "make install exec_prefix=/foo"
++# and all the variables that are supposed to be based on exec_prefix
++# by default will actually change.
++# Use braces instead of parens because sh, perl, etc. also accept them.
++# (The list follows the same order as the GNU Coding Standards.)
+ bindir='${exec_prefix}/bin'
+ sbindir='${exec_prefix}/sbin'
+ libexecdir='${exec_prefix}/libexec'
+-datadir='${prefix}/share'
++datarootdir='${prefix}/share'
++datadir='${datarootdir}'
+ sysconfdir='${prefix}/etc'
+ sharedstatedir='${prefix}/com'
+ localstatedir='${prefix}/var'
+-libdir='${exec_prefix}/lib'
+ includedir='${prefix}/include'
+ oldincludedir='/usr/include'
+-infodir='${prefix}/info'
+-mandir='${prefix}/man'
+-
+-# Initialize some other variables.
+-subdirs=
+-MFLAGS= MAKEFLAGS=
+-# Maximum number of lines to put in a shell here document.
+-ac_max_here_lines=12
++docdir='${datarootdir}/doc/${PACKAGE}'
++infodir='${datarootdir}/info'
++htmldir='${docdir}'
++dvidir='${docdir}'
++pdfdir='${docdir}'
++psdir='${docdir}'
++libdir='${exec_prefix}/lib'
++localedir='${datarootdir}/locale'
++mandir='${datarootdir}/man'
+
+ ac_prev=
++ac_dashdash=
+ for ac_option
+ do
+-
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+- eval "$ac_prev=\$ac_option"
++ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+- case "$ac_option" in
+- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+- *) ac_optarg= ;;
++ case $ac_option in
++ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
++ *=) ac_optarg= ;;
++ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+- case "$ac_option" in
++ case $ac_dashdash$ac_option in
++ --)
++ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+- bindir="$ac_optarg" ;;
++ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+- ac_prev=build ;;
++ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+- build="$ac_optarg" ;;
++ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+- cache_file="$ac_optarg" ;;
++ cache_file=$ac_optarg ;;
++
++ --config-cache | -C)
++ cache_file=config.cache ;;
+
+- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
++ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+- | --da=*)
+- datadir="$ac_optarg" ;;
++ -datadir=* | --datadir=* | --datadi=* | --datad=*)
++ datadir=$ac_optarg ;;
++
++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
++ | --dataroo | --dataro | --datar)
++ ac_prev=datarootdir ;;
++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
++ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
++ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+- fi
+- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+- eval "enable_${ac_feature}=no" ;;
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ as_fn_error $? "invalid feature name: $ac_useropt"
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"enable_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
++ esac
++ eval enable_$ac_useropt=no ;;
++
++ -docdir | --docdir | --docdi | --doc | --do)
++ ac_prev=docdir ;;
++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
++ docdir=$ac_optarg ;;
++
++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
++ ac_prev=dvidir ;;
++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
++ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
++ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+- fi
+- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+- case "$ac_option" in
+- *=*) ;;
+- *) ac_optarg=yes ;;
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ as_fn_error $? "invalid feature name: $ac_useropt"
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"enable_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
+ esac
+- eval "enable_${ac_feature}='$ac_optarg'" ;;
++ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+@@ -138,116 +886,77 @@ do
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+- exec_prefix="$ac_optarg" ;;
++ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+- -help | --help | --hel | --he)
+- # Omit some internal or obsolete options to make the list less imposing.
+- # This message is too long to be a string in the A/UX 3.1 sh.
+- cat << EOF
+-Usage: configure [options] [host]
+-Options: [defaults in brackets after descriptions]
+-Configuration:
+- --cache-file=FILE cache test results in FILE
+- --help print this message
+- --no-create do not create output files
+- --quiet, --silent do not print \`checking...' messages
+- --version print the version of autoconf that created configure
+-Directory and file names:
+- --prefix=PREFIX install architecture-independent files in PREFIX
+- [$ac_default_prefix]
+- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+- [same as prefix]
+- --bindir=DIR user executables in DIR [EPREFIX/bin]
+- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
+- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
+- --datadir=DIR read-only architecture-independent data in DIR
+- [PREFIX/share]
+- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
+- --sharedstatedir=DIR modifiable architecture-independent data in DIR
+- [PREFIX/com]
+- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
+- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
+- --includedir=DIR C header files in DIR [PREFIX/include]
+- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
+- --infodir=DIR info documentation in DIR [PREFIX/info]
+- --mandir=DIR man documentation in DIR [PREFIX/man]
+- --srcdir=DIR find the sources in DIR [configure dir or ..]
+- --program-prefix=PREFIX prepend PREFIX to installed program names
+- --program-suffix=SUFFIX append SUFFIX to installed program names
+- --program-transform-name=PROGRAM
+- run sed PROGRAM on installed program names
+-EOF
+- cat << EOF
+-Host type:
+- --build=BUILD configure for building on BUILD [BUILD=HOST]
+- --host=HOST configure for HOST [guessed]
+- --target=TARGET configure for TARGET [TARGET=HOST]
+-Features and packages:
+- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+- --x-includes=DIR X include files are in DIR
+- --x-libraries=DIR X library files are in DIR
+-EOF
+- if test -n "$ac_help"; then
+- echo "--enable and --with options recognized:$ac_help"
+- fi
+- exit 0 ;;
++ -help | --help | --hel | --he | -h)
++ ac_init_help=long ;;
++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
++ ac_init_help=recursive ;;
++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
++ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+- ac_prev=host ;;
++ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+- host="$ac_optarg" ;;
++ host_alias=$ac_optarg ;;
++
++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
++ ac_prev=htmldir ;;
++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
++ | --ht=*)
++ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+- includedir="$ac_optarg" ;;
++ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+- infodir="$ac_optarg" ;;
++ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+- libdir="$ac_optarg" ;;
++ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+- libexecdir="$ac_optarg" ;;
++ libexecdir=$ac_optarg ;;
++
++ -localedir | --localedir | --localedi | --localed | --locale)
++ ac_prev=localedir ;;
++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
++ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+- | --localstate | --localstat | --localsta | --localst \
+- | --locals | --local | --loca | --loc | --lo)
++ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+- localstatedir="$ac_optarg" ;;
++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
++ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+- mandir="$ac_optarg" ;;
++ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+- | --no-cr | --no-c)
++ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+@@ -261,26 +970,26 @@ EOF
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+- oldincludedir="$ac_optarg" ;;
++ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+- prefix="$ac_optarg" ;;
++ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+- program_prefix="$ac_optarg" ;;
++ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+- program_suffix="$ac_optarg" ;;
++ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+@@ -297,7 +1006,17 @@ EOF
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+- program_transform_name="$ac_optarg" ;;
++ program_transform_name=$ac_optarg ;;
++
++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
++ ac_prev=pdfdir ;;
++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
++ pdfdir=$ac_optarg ;;
++
++ -psdir | --psdir | --psdi | --psd | --ps)
++ ac_prev=psdir ;;
++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
++ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+@@ -307,7 +1026,7 @@ EOF
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+- sbindir="$ac_optarg" ;;
++ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+@@ -318,58 +1037,67 @@ EOF
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+- sharedstatedir="$ac_optarg" ;;
++ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+- site="$ac_optarg" ;;
++ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+- srcdir="$ac_optarg" ;;
++ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+- sysconfdir="$ac_optarg" ;;
++ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+- ac_prev=target ;;
++ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+- target="$ac_optarg" ;;
++ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+- -version | --version | --versio | --versi | --vers)
+- echo "configure generated by autoconf version 2.12"
+- exit 0 ;;
++ -version | --version | --versio | --versi | --vers | -V)
++ ac_init_version=: ;;
+
+ -with-* | --with-*)
+- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
++ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+- fi
+- ac_package=`echo $ac_package| sed 's/-/_/g'`
+- case "$ac_option" in
+- *=*) ;;
+- *) ac_optarg=yes ;;
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ as_fn_error $? "invalid package name: $ac_useropt"
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"with_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
+ esac
+- eval "with_${ac_package}='$ac_optarg'" ;;
++ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
++ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+- fi
+- ac_package=`echo $ac_package| sed 's/-/_/g'`
+- eval "with_${ac_package}=no" ;;
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ as_fn_error $? "invalid package name: $ac_useropt"
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"with_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
++ esac
++ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+@@ -380,176 +1108,1195 @@ EOF
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+- x_includes="$ac_optarg" ;;
++ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+- x_libraries="$ac_optarg" ;;
++ x_libraries=$ac_optarg ;;
+
+- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
++ -*) as_fn_error $? "unrecognized option: \`$ac_option'
++Try \`$0 --help' for more information"
+ ;;
+
++ *=*)
++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
++ # Reject names that are not valid shell variable names.
++ case $ac_envvar in #(
++ '' | [0-9]* | *[!_$as_cr_alnum]* )
++ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
++ esac
++ eval $ac_envvar=\$ac_optarg
++ export $ac_envvar ;;
++
+ *)
+- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+- echo "configure: warning: $ac_option: invalid host type" 1>&2
+- fi
+- if test "x$nonopt" != xNONE; then
+- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+- fi
+- nonopt="$ac_option"
++ # FIXME: should be removed in autoconf 3.0.
++ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
++ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
++ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+ ;;
+
+ esac
+ done
+
+ if test -n "$ac_prev"; then
+- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
++ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
++ as_fn_error $? "missing argument to $ac_option"
+ fi
+
+-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+-
+-# File descriptor usage:
+-# 0 standard input
+-# 1 file creation
+-# 2 errors and warnings
+-# 3 some systems may open it to /dev/tty
+-# 4 used on the Kubota Titan
+-# 6 checking for... messages and results
+-# 5 compiler messages saved in config.log
+-if test "$silent" = yes; then
+- exec 6>/dev/null
+-else
+- exec 6>&1
++if test -n "$ac_unrecognized_opts"; then
++ case $enable_option_checking in
++ no) ;;
++ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
++ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
++ esac
+ fi
+-exec 5>./config.log
+
+-echo "\
+-This file contains any messages produced by compilers while
+-running configure, to aid debugging if configure makes a mistake.
+-" 1>&5
+-
+-# Strip out --no-create and --no-recursion so they do not pile up.
+-# Also quote any args containing shell metacharacters.
+-ac_configure_args=
+-for ac_arg
++# Check all directory arguments for consistency.
++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
++ datadir sysconfdir sharedstatedir localstatedir includedir \
++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
++ libdir localedir mandir
+ do
+- case "$ac_arg" in
+- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+- | --no-cr | --no-c) ;;
+- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
++ eval ac_val=\$$ac_var
++ # Remove trailing slashes.
++ case $ac_val in
++ */ )
++ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
++ eval $ac_var=\$ac_val;;
++ esac
++ # Be sure to have absolute directory names.
++ case $ac_val in
++ [\\/$]* | ?:[\\/]* ) continue;;
++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
++ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+ done
+
+-# NLS nuisances.
+-# Only set these to C if already set. These must not be set unconditionally
+-# because not all systems understand e.g. LANG=C (notably SCO).
+-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+-# Non-C LC_CTYPE values break the ctype check.
+-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
++# There might be people who depend on the old broken behavior: `$host'
++# used to hold the argument of --host etc.
++# FIXME: To remove some day.
++build=$build_alias
++host=$host_alias
++target=$target_alias
++
++# FIXME: To remove some day.
++if test "x$host_alias" != x; then
++ if test "x$build_alias" = x; then
++ cross_compiling=maybe
++ elif test "x$build_alias" != "x$host_alias"; then
++ cross_compiling=yes
++ fi
++fi
++
++ac_tool_prefix=
++test -n "$host_alias" && ac_tool_prefix=$host_alias-
++
++test "$silent" = yes && exec 6>/dev/null
++
++
++ac_pwd=`pwd` && test -n "$ac_pwd" &&
++ac_ls_di=`ls -di .` &&
++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
++ as_fn_error $? "working directory cannot be determined"
++test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
++ as_fn_error $? "pwd does not report name of working directory"
+
+-# confdefs.h avoids OS command line length limits that DEFS can exceed.
+-rm -rf conftest* confdefs.h
+-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+-echo > confdefs.h
+-
+-# A filename unique to this package, relative to the directory that
+-# configure is in, which we can look for to find out if srcdir is correct.
+-ac_unique_file=src/crctab.c
+
+ # Find the source files, if location was not specified.
+ if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+- # Try the directory containing this script, then its parent.
+- ac_prog=$0
+- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
++ # Try the directory containing this script, then the parent directory.
++ ac_confdir=`$as_dirname -- "$as_myself" ||
++$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_myself" : 'X\(//\)[^/]' \| \
++ X"$as_myself" : 'X\(//\)$' \| \
++ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$as_myself" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
+ srcdir=$ac_confdir
+- if test ! -r $srcdir/$ac_unique_file; then
++ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+ else
+ ac_srcdir_defaulted=no
+ fi
+-if test ! -r $srcdir/$ac_unique_file; then
+- if test "$ac_srcdir_defaulted" = yes; then
+- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+- else
+- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+- fi
++if test ! -r "$srcdir/$ac_unique_file"; then
++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
++ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
++fi
++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
++ac_abs_confdir=`(
++ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
++ pwd)`
++# When building in place, set srcdir=.
++if test "$ac_abs_confdir" = "$ac_pwd"; then
++ srcdir=.
++fi
++# Remove unnecessary trailing slashes from srcdir.
++# Double slashes in file names in object file debugging info
++# mess up M-x gdb in Emacs.
++case $srcdir in
++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
++esac
++for ac_var in $ac_precious_vars; do
++ eval ac_env_${ac_var}_set=\${${ac_var}+set}
++ eval ac_env_${ac_var}_value=\$${ac_var}
++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
++ eval ac_cv_env_${ac_var}_value=\$${ac_var}
++done
++
++#
++# Report the --help message.
++#
++if test "$ac_init_help" = "long"; then
++ # Omit some internal or obsolete options to make the list less imposing.
++ # This message is too long to be a string in the A/UX 3.1 sh.
++ cat <<_ACEOF
++\`configure' configures this package to adapt to many kinds of systems.
++
++Usage: $0 [OPTION]... [VAR=VALUE]...
++
++To assign environment variables (e.g., CC, CFLAGS...), specify them as
++VAR=VALUE. See below for descriptions of some of the useful variables.
++
++Defaults for the options are specified in brackets.
++
++Configuration:
++ -h, --help display this help and exit
++ --help=short display options specific to this package
++ --help=recursive display the short help of all the included packages
++ -V, --version display version information and exit
++ -q, --quiet, --silent do not print \`checking ...' messages
++ --cache-file=FILE cache test results in FILE [disabled]
++ -C, --config-cache alias for \`--cache-file=config.cache'
++ -n, --no-create do not create output files
++ --srcdir=DIR find the sources in DIR [configure dir or \`..']
++
++Installation directories:
++ --prefix=PREFIX install architecture-independent files in PREFIX
++ [$ac_default_prefix]
++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
++ [PREFIX]
++
++By default, \`make install' will install all the files in
++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
++an installation prefix other than \`$ac_default_prefix' using \`--prefix',
++for instance \`--prefix=\$HOME'.
++
++For better control, use the options below.
++
++Fine tuning of the installation directories:
++ --bindir=DIR user executables [EPREFIX/bin]
++ --sbindir=DIR system admin executables [EPREFIX/sbin]
++ --libexecdir=DIR program executables [EPREFIX/libexec]
++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
++ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
++ --libdir=DIR object code libraries [EPREFIX/lib]
++ --includedir=DIR C header files [PREFIX/include]
++ --oldincludedir=DIR C header files for non-gcc [/usr/include]
++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
++ --infodir=DIR info documentation [DATAROOTDIR/info]
++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
++ --mandir=DIR man documentation [DATAROOTDIR/man]
++ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
++ --htmldir=DIR html documentation [DOCDIR]
++ --dvidir=DIR dvi documentation [DOCDIR]
++ --pdfdir=DIR pdf documentation [DOCDIR]
++ --psdir=DIR ps documentation [DOCDIR]
++_ACEOF
++
++ cat <<\_ACEOF
++
++Program names:
++ --program-prefix=PREFIX prepend PREFIX to installed program names
++ --program-suffix=SUFFIX append SUFFIX to installed program names
++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
++
++System types:
++ --build=BUILD configure for building on BUILD [guessed]
++ --host=HOST cross-compile to build programs to run on HOST [BUILD]
++_ACEOF
+ fi
+-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+-# Prefer explicitly selected file to automatically selected ones.
+-if test -z "$CONFIG_SITE"; then
+- if test "x$prefix" != xNONE; then
+- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+- else
+- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
++if test -n "$ac_init_help"; then
++
++ cat <<\_ACEOF
++
++Optional Features:
++ --disable-option-checking ignore unrecognized --enable/--with options
++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
++ --enable-silent-rules less verbose build output (undo: "make V=1")
++ --disable-silent-rules verbose build output (undo: "make V=0")
++--disable-timesync exclude support for timesync protocol
++--enable-pubdir=/path include support for a public writeable directory
++--disable-mkdir disable support for creating directories (lrz)
++--enable-syslog=FACILITY,{force,default,optional} include syslogsupport
++ --enable-dependency-tracking
++ do not reject slow dependency extractors
++ --disable-dependency-tracking
++ speeds up one-time build
++ --disable-nls do not use Native Language Support
++ --disable-rpath do not hardcode runtime library paths
++
++Optional Packages:
++ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
++ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
++ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
++ --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
++ --without-libiconv-prefix don't search for libiconv in includedir and libdir
++ --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib
++ --without-libintl-prefix don't search for libintl in includedir and libdir
++
++Some influential environment variables:
++ CC C compiler command
++ CFLAGS C compiler flags
++ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
++ nonstandard directory <lib dir>
++ LIBS libraries to pass to the linker, e.g. -l<library>
++ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
++ you have headers in a nonstandard directory <include dir>
++ CPP C preprocessor
++
++Use these variables to override the choices made by `configure' or to help
++it to find libraries and programs with nonstandard names/locations.
++
++Report bugs to the package provider.
++_ACEOF
++ac_status=$?
++fi
++
++if test "$ac_init_help" = "recursive"; then
++ # If there are subdirs, report their specific --help.
++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
++ test -d "$ac_dir" ||
++ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
++ continue
++ ac_builddir=.
++
++case "$ac_dir" in
++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
++*)
++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
++ # A ".." for each directory in $ac_dir_suffix.
++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
++ case $ac_top_builddir_sub in
++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
++ esac ;;
++esac
++ac_abs_top_builddir=$ac_pwd
++ac_abs_builddir=$ac_pwd$ac_dir_suffix
++# for backward compatibility:
++ac_top_builddir=$ac_top_build_prefix
++
++case $srcdir in
++ .) # We are building in place.
++ ac_srcdir=.
++ ac_top_srcdir=$ac_top_builddir_sub
++ ac_abs_top_srcdir=$ac_pwd ;;
++ [\\/]* | ?:[\\/]* ) # Absolute name.
++ ac_srcdir=$srcdir$ac_dir_suffix;
++ ac_top_srcdir=$srcdir
++ ac_abs_top_srcdir=$srcdir ;;
++ *) # Relative name.
++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
++ ac_top_srcdir=$ac_top_build_prefix$srcdir
++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
++esac
++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
++
++ cd "$ac_dir" || { ac_status=$?; continue; }
++ # Check for guested configure.
++ if test -f "$ac_srcdir/configure.gnu"; then
++ echo &&
++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
++ elif test -f "$ac_srcdir/configure"; then
++ echo &&
++ $SHELL "$ac_srcdir/configure" --help=recursive
++ else
++ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
++ fi || ac_status=$?
++ cd "$ac_pwd" || { ac_status=$?; break; }
++ done
++fi
++
++test -n "$ac_init_help" && exit $ac_status
++if $ac_init_version; then
++ cat <<\_ACEOF
++configure
++generated by GNU Autoconf 2.69
++
++Copyright (C) 2012 Free Software Foundation, Inc.
++This configure script is free software; the Free Software Foundation
++gives unlimited permission to copy, distribute and modify it.
++_ACEOF
++ exit
++fi
++
++## ------------------------ ##
++## Autoconf initialization. ##
++## ------------------------ ##
++
++# ac_fn_c_try_compile LINENO
++# --------------------------
++# Try to compile conftest.$ac_ext, and return whether this succeeded.
++ac_fn_c_try_compile ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ rm -f conftest.$ac_objext
++ if { { ac_try="$ac_compile"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_compile") 2>conftest.err
++ ac_status=$?
++ if test -s conftest.err; then
++ grep -v '^ *+' conftest.err >conftest.er1
++ cat conftest.er1 >&5
++ mv -f conftest.er1 conftest.err
+ fi
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && {
++ test -z "$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ } && test -s conftest.$ac_objext; then :
++ ac_retval=0
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ ac_retval=1
++fi
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++ as_fn_set_status $ac_retval
++
++} # ac_fn_c_try_compile
++
++# ac_fn_c_try_cpp LINENO
++# ----------------------
++# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
++ac_fn_c_try_cpp ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ if { { ac_try="$ac_cpp conftest.$ac_ext"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
++ ac_status=$?
++ if test -s conftest.err; then
++ grep -v '^ *+' conftest.err >conftest.er1
++ cat conftest.er1 >&5
++ mv -f conftest.er1 conftest.err
++ fi
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } > conftest.i && {
++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ }; then :
++ ac_retval=0
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ ac_retval=1
++fi
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++ as_fn_set_status $ac_retval
++
++} # ac_fn_c_try_cpp
++
++# ac_fn_c_try_link LINENO
++# -----------------------
++# Try to link conftest.$ac_ext, and return whether this succeeded.
++ac_fn_c_try_link ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ rm -f conftest.$ac_objext conftest$ac_exeext
++ if { { ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_link") 2>conftest.err
++ ac_status=$?
++ if test -s conftest.err; then
++ grep -v '^ *+' conftest.err >conftest.er1
++ cat conftest.er1 >&5
++ mv -f conftest.er1 conftest.err
++ fi
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && {
++ test -z "$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ test -x conftest$ac_exeext
++ }; then :
++ ac_retval=0
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ ac_retval=1
++fi
++ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
++ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
++ # interfere with the next link command; also delete a directory that is
++ # left behind by Apple's compiler. We do this before executing the actions.
++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++ as_fn_set_status $ac_retval
++
++} # ac_fn_c_try_link
++
++# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
++# -------------------------------------------------------
++# Tests whether HEADER exists, giving a warning if it cannot be compiled using
++# the include files in INCLUDES and setting the cache variable VAR
++# accordingly.
++ac_fn_c_check_header_mongrel ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ if eval \${$3+:} false; then :
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if eval \${$3+:} false; then :
++ $as_echo_n "(cached) " >&6
++fi
++eval ac_res=\$$3
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++else
++ # Is the header compilable?
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
++$as_echo_n "checking $2 usability... " >&6; }
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++#include <$2>
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_header_compiler=yes
++else
++ ac_header_compiler=no
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
++$as_echo "$ac_header_compiler" >&6; }
++
++# Is the header present?
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
++$as_echo_n "checking $2 presence... " >&6; }
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <$2>
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
++ ac_header_preproc=yes
++else
++ ac_header_preproc=no
++fi
++rm -f conftest.err conftest.i conftest.$ac_ext
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
++$as_echo "$ac_header_preproc" >&6; }
++
++# So? What about this header?
++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
++ yes:no: )
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
++$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
++ ;;
++ no:yes:* )
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
++$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
++$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
++$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
++$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
++ ;;
++esac
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if eval \${$3+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ eval "$3=\$ac_header_compiler"
++fi
++eval ac_res=\$$3
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++fi
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++
++} # ac_fn_c_check_header_mongrel
++
++# ac_fn_c_try_run LINENO
++# ----------------------
++# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
++# that executables *can* be run.
++ac_fn_c_try_run ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ if { { ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_link") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
++ { { case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_try") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; }; then :
++ ac_retval=0
++else
++ $as_echo "$as_me: program exited with status $ac_status" >&5
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ ac_retval=$ac_status
++fi
++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++ as_fn_set_status $ac_retval
++
++} # ac_fn_c_try_run
++
++# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
++# -------------------------------------------------------
++# Tests whether HEADER exists and can be compiled using the include files in
++# INCLUDES, setting the cache variable VAR accordingly.
++ac_fn_c_check_header_compile ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if eval \${$3+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++#include <$2>
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ eval "$3=yes"
++else
++ eval "$3=no"
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++eval ac_res=\$$3
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++
++} # ac_fn_c_check_header_compile
++
++# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
++# -------------------------------------------
++# Tests whether TYPE exists after having included INCLUDES, setting cache
++# variable VAR accordingly.
++ac_fn_c_check_type ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if eval \${$3+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ eval "$3=no"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++int
++main ()
++{
++if (sizeof ($2))
++ return 0;
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++int
++main ()
++{
++if (sizeof (($2)))
++ return 0;
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++
++else
++ eval "$3=yes"
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++eval ac_res=\$$3
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++
++} # ac_fn_c_check_type
++
++# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES
++# ----------------------------------------------------
++# Tries to find if the field MEMBER exists in type AGGR, after including
++# INCLUDES, setting cache variable VAR accordingly.
++ac_fn_c_check_member ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
++$as_echo_n "checking for $2.$3... " >&6; }
++if eval \${$4+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$5
++int
++main ()
++{
++static $2 ac_aggr;
++if (ac_aggr.$3)
++return 0;
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ eval "$4=yes"
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$5
++int
++main ()
++{
++static $2 ac_aggr;
++if (sizeof ac_aggr.$3)
++return 0;
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ eval "$4=yes"
++else
++ eval "$4=no"
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+-for ac_site_file in $CONFIG_SITE; do
+- if test -r "$ac_site_file"; then
+- echo "loading site script $ac_site_file"
+- . "$ac_site_file"
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++eval ac_res=\$$4
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++
++} # ac_fn_c_check_member
++
++# ac_fn_c_check_func LINENO FUNC VAR
++# ----------------------------------
++# Tests whether FUNC exists, setting the cache variable VAR accordingly
++ac_fn_c_check_func ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if eval \${$3+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
++ For example, HP-UX 11i <limits.h> declares gettimeofday. */
++#define $2 innocuous_$2
++
++/* System header to define __stub macros and hopefully few prototypes,
++ which can conflict with char $2 (); below.
++ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ <limits.h> exists even on freestanding compilers. */
++
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++
++#undef $2
++
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char $2 ();
++/* The GNU C library defines this for functions which it implements
++ to always fail with ENOSYS. Some functions are actually named
++ something starting with __ and the normal name is an alias. */
++#if defined __stub_$2 || defined __stub___$2
++choke me
++#endif
++
++int
++main ()
++{
++return $2 ();
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ eval "$3=yes"
++else
++ eval "$3=no"
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++fi
++eval ac_res=\$$3
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++
++} # ac_fn_c_check_func
++cat >config.log <<_ACEOF
++This file contains any messages produced by compilers while
++running configure, to aid debugging if configure makes a mistake.
++
++It was created by $as_me, which was
++generated by GNU Autoconf 2.69. Invocation command line was
++
++ $ $0 $@
++
++_ACEOF
++exec 5>>config.log
++{
++cat <<_ASUNAME
++## --------- ##
++## Platform. ##
++## --------- ##
++
++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
++uname -m = `(uname -m) 2>/dev/null || echo unknown`
++uname -r = `(uname -r) 2>/dev/null || echo unknown`
++uname -s = `(uname -s) 2>/dev/null || echo unknown`
++uname -v = `(uname -v) 2>/dev/null || echo unknown`
++
++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
++
++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
++
++_ASUNAME
++
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ $as_echo "PATH: $as_dir"
++ done
++IFS=$as_save_IFS
++
++} >&5
++
++cat >&5 <<_ACEOF
++
++
++## ----------- ##
++## Core tests. ##
++## ----------- ##
++
++_ACEOF
++
++
++# Keep a trace of the command line.
++# Strip out --no-create and --no-recursion so they do not pile up.
++# Strip out --silent because we don't want to record it for future runs.
++# Also quote any args containing shell meta-characters.
++# Make two passes to allow for proper duplicate-argument suppression.
++ac_configure_args=
++ac_configure_args0=
++ac_configure_args1=
++ac_must_keep_next=false
++for ac_pass in 1 2
++do
++ for ac_arg
++ do
++ case $ac_arg in
++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil)
++ continue ;;
++ *\'*)
++ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ esac
++ case $ac_pass in
++ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
++ 2)
++ as_fn_append ac_configure_args1 " '$ac_arg'"
++ if test $ac_must_keep_next = true; then
++ ac_must_keep_next=false # Got value, back to normal.
++ else
++ case $ac_arg in
++ *=* | --config-cache | -C | -disable-* | --disable-* \
++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
++ | -with-* | --with-* | -without-* | --without-* | --x)
++ case "$ac_configure_args0 " in
++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
++ esac
++ ;;
++ -* ) ac_must_keep_next=true ;;
++ esac
++ fi
++ as_fn_append ac_configure_args " '$ac_arg'"
++ ;;
++ esac
++ done
++done
++{ ac_configure_args0=; unset ac_configure_args0;}
++{ ac_configure_args1=; unset ac_configure_args1;}
++
++# When interrupted or exit'd, cleanup temporary files, and complete
++# config.log. We remove comments because anyway the quotes in there
++# would cause problems or look ugly.
++# WARNING: Use '\'' to represent an apostrophe within the trap.
++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
++trap 'exit_status=$?
++ # Save into config.log some information that might help in debugging.
++ {
++ echo
++
++ $as_echo "## ---------------- ##
++## Cache variables. ##
++## ---------------- ##"
++ echo
++ # The following way of writing the cache mishandles newlines in values,
++(
++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
++ eval ac_val=\$$ac_var
++ case $ac_val in #(
++ *${as_nl}*)
++ case $ac_var in #(
++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
++ esac
++ case $ac_var in #(
++ _ | IFS | as_nl) ;; #(
++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
++ *) { eval $ac_var=; unset $ac_var;} ;;
++ esac ;;
++ esac
++ done
++ (set) 2>&1 |
++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
++ *${as_nl}ac_space=\ *)
++ sed -n \
++ "s/'\''/'\''\\\\'\'''\''/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
++ ;; #(
++ *)
++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
++ ;;
++ esac |
++ sort
++)
++ echo
++
++ $as_echo "## ----------------- ##
++## Output variables. ##
++## ----------------- ##"
++ echo
++ for ac_var in $ac_subst_vars
++ do
++ eval ac_val=\$$ac_var
++ case $ac_val in
++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
++ esac
++ $as_echo "$ac_var='\''$ac_val'\''"
++ done | sort
++ echo
++
++ if test -n "$ac_subst_files"; then
++ $as_echo "## ------------------- ##
++## File substitutions. ##
++## ------------------- ##"
++ echo
++ for ac_var in $ac_subst_files
++ do
++ eval ac_val=\$$ac_var
++ case $ac_val in
++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
++ esac
++ $as_echo "$ac_var='\''$ac_val'\''"
++ done | sort
++ echo
++ fi
++
++ if test -s confdefs.h; then
++ $as_echo "## ----------- ##
++## confdefs.h. ##
++## ----------- ##"
++ echo
++ cat confdefs.h
++ echo
++ fi
++ test "$ac_signal" != 0 &&
++ $as_echo "$as_me: caught signal $ac_signal"
++ $as_echo "$as_me: exit $exit_status"
++ } >&5
++ rm -f core *.core core.conftest.* &&
++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
++ exit $exit_status
++' 0
++for ac_signal in 1 2 13 15; do
++ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
++done
++ac_signal=0
++
++# confdefs.h avoids OS command line length limits that DEFS can exceed.
++rm -f -r conftest* confdefs.h
++
++$as_echo "/* confdefs.h */" > confdefs.h
++
++# Predefined preprocessor variables.
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_NAME "$PACKAGE_NAME"
++_ACEOF
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
++_ACEOF
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_VERSION "$PACKAGE_VERSION"
++_ACEOF
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_STRING "$PACKAGE_STRING"
++_ACEOF
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
++_ACEOF
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_URL "$PACKAGE_URL"
++_ACEOF
++
++
++# Let the site file select an alternate cache file if it wants to.
++# Prefer an explicitly selected file to automatically selected ones.
++ac_site_file1=NONE
++if test -n "$CONFIG_SITE"; then
++ # We do not want a PATH search for config.site.
++ case $CONFIG_SITE in #((
++ -*) ac_site_file1=./$CONFIG_SITE;;
++ */*) ac_site_file1=$CONFIG_SITE;;
++ *) ac_site_file1=./$CONFIG_SITE;;
++ esac
++fi
++for ac_site_file in $ac_site_file1
++do
++ test "x$ac_site_file" = xNONE && continue
++ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
++$as_echo "$as_me: loading site script $ac_site_file" >&6;}
++ sed 's/^/| /' "$ac_site_file" >&5
++ . "$ac_site_file" \
++ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "failed to load site script $ac_site_file
++See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ done
+
+ if test -r "$cache_file"; then
+- echo "loading cache $cache_file"
+- . $cache_file
++ # Some versions of bash will fail to source /dev/null (special files
++ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
++ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
++$as_echo "$as_me: loading cache $cache_file" >&6;}
++ case $cache_file in
++ [\\/]* | ?:[\\/]* ) . "$cache_file";;
++ *) . "./$cache_file";;
++ esac
++ fi
+ else
+- echo "creating cache $cache_file"
+- > $cache_file
+-fi
++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
++$as_echo "$as_me: creating cache $cache_file" >&6;}
++ >$cache_file
++fi
++
++as_fn_append ac_header_list " stdlib.h"
++as_fn_append ac_header_list " unistd.h"
++as_fn_append ac_header_list " sys/param.h"
++gt_needs="$gt_needs "
++# Check that the precious variables saved in the cache have kept the same
++# value.
++ac_cache_corrupted=false
++for ac_var in $ac_precious_vars; do
++ eval ac_old_set=\$ac_cv_env_${ac_var}_set
++ eval ac_new_set=\$ac_env_${ac_var}_set
++ eval ac_old_val=\$ac_cv_env_${ac_var}_value
++ eval ac_new_val=\$ac_env_${ac_var}_value
++ case $ac_old_set,$ac_new_set in
++ set,)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
++$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
++ ac_cache_corrupted=: ;;
++ ,set)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
++$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
++ ac_cache_corrupted=: ;;
++ ,);;
++ *)
++ if test "x$ac_old_val" != "x$ac_new_val"; then
++ # differences in whitespace do not lead to failure.
++ ac_old_val_w=`echo x $ac_old_val`
++ ac_new_val_w=`echo x $ac_new_val`
++ if test "$ac_old_val_w" != "$ac_new_val_w"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
++$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
++ ac_cache_corrupted=:
++ else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
++$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
++ eval $ac_var=\$ac_old_val
++ fi
++ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
++$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
++$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
++ fi;;
++ esac
++ # Pass precious variables to config.status.
++ if test "$ac_new_set" = set; then
++ case $ac_new_val in
++ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
++ *) ac_arg=$ac_var=$ac_new_val ;;
++ esac
++ case " $ac_configure_args " in
++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
++ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
++ esac
++ fi
++done
++if $ac_cache_corrupted; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
++$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
++ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
++fi
++## -------------------- ##
++## Main body of script. ##
++## -------------------- ##
+
+ ac_ext=c
+-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+-cross_compiling=$ac_cv_prog_cc_cross
+-
+-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+- ac_n= ac_c='
+-' ac_t=' '
+- else
+- ac_n=-n ac_c= ac_t=
+- fi
+-else
+- ac_n= ac_c='\c' ac_t=
+-fi
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
++am__api_version='1.16'
++
+ ac_aux_dir=
+-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+- if test -f $ac_dir/install-sh; then
++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
++ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+- elif test -f $ac_dir/install.sh; then
++ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
++ elif test -f "$ac_dir/shtool"; then
++ ac_aux_dir=$ac_dir
++ ac_install_sh="$ac_aux_dir/shtool install -c"
++ break
+ fi
+ done
+ if test -z "$ac_aux_dir"; then
+- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
++ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+ fi
+-ac_config_guess=$ac_aux_dir/config.guess
+-ac_config_sub=$ac_aux_dir/config.sub
+-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
++
++# These three variables are undocumented and unsupported,
++# and are intended to be withdrawn in a future Autoconf release.
++# They can cause serious problems if a builder's source tree is in a directory
++# whose full name contains unusual characters.
++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
++
+
+ # Find a good install program. We prefer a C program (faster),
+ # so one script is as good as another. But avoid the broken or
+@@ -558,250 +2305,546 @@ ac_configure=$ac_aux_dir/configure # Thi
+ # SunOS /usr/etc/install
+ # IRIX /sbin/install
+ # AIX /bin/install
++# AmigaOS /C/install, which installs bootblocks on floppy discs
++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+ # AFS /usr/afsws/bin/install, which mishandles nonexistent args
+ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
++# OS/2's system install, which has a completely different semantic
+ # ./install, which can be erroneously created by make from ./install.sh.
+-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+-echo "configure:566: checking for a BSD compatible install" >&5
++# Reject install programs that cannot install multiple files.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
++$as_echo_n "checking for a BSD-compatible install... " >&6; }
+ if test -z "$INSTALL"; then
+-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++if ${ac_cv_path_install+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+- for ac_dir in $PATH; do
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+- case "$ac_dir/" in
+- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+- *)
+- # OSF1 and SCO ODT 3.0 have their own names for install.
+- for ac_prog in ginstall installbsd scoinst install; do
+- if test -f $ac_dir/$ac_prog; then
++case $as_dir/ in #((
++ ./ | .// | /[cC]/* | \
++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
++ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
++ /usr/ucb/* ) ;;
++ *)
++ # OSF1 and SCO ODT 3.0 have their own names for install.
++ # Don't use installbsd from OSF since it installs stuff as root
++ # by default.
++ for ac_prog in ginstall scoinst install; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+- # OSF/1 installbsd also uses dspmsg, but is usable.
++ :
++ elif test $ac_prog = install &&
++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+- ac_cv_path_install="$ac_dir/$ac_prog -c"
+- break 2
++ rm -rf conftest.one conftest.two conftest.dir
++ echo one > conftest.one
++ echo two > conftest.two
++ mkdir conftest.dir
++ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
++ test -s conftest.one && test -s conftest.two &&
++ test -s conftest.dir/conftest.one &&
++ test -s conftest.dir/conftest.two
++ then
++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
++ break 3
++ fi
+ fi
+ fi
+ done
+- ;;
+- esac
++ done
++ ;;
++esac
++
+ done
+- IFS="$ac_save_IFS"
++IFS=$as_save_IFS
++
++rm -rf conftest.one conftest.two conftest.dir
+
+ fi
+ if test "${ac_cv_path_install+set}" = set; then
+- INSTALL="$ac_cv_path_install"
++ INSTALL=$ac_cv_path_install
+ else
+- # As a last resort, use the slow shell script. We don't cache a
+- # path for INSTALL within a source directory, because that will
++ # As a last resort, use the slow shell script. Don't cache a
++ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+- # removed, or if the path is relative.
+- INSTALL="$ac_install_sh"
++ # removed, or if the value is a relative name.
++ INSTALL=$ac_install_sh
+ fi
+ fi
+-echo "$ac_t""$INSTALL" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
++$as_echo "$INSTALL" >&6; }
+
+ # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+ # It thinks the first close brace ends the variable substitution.
+ test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
++
+ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
++$as_echo_n "checking whether build environment is sane... " >&6; }
++# Reject unsafe characters in $srcdir or the absolute working directory
++# name. Accept space and tab only in the latter.
++am_lf='
++'
++case `pwd` in
++ *[\\\"\#\$\&\'\`$am_lf]*)
++ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
++esac
++case $srcdir in
++ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
++ as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
++esac
+
+-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
+
+-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+-echo "configure:619: checking whether build environment is sane" >&5
+-# Just in case
+-sleep 1
+-echo timestamp > conftestfile
+-# Do `set' in a subshell so we don't clobber the current shell's
+-# arguments. Must try -L first in case configure is actually a
+-# symlink; some systems play weird games with the mod time of symlinks
+-# (eg FreeBSD returns the mod time of the symlink's containing
+-# directory).
+-if (
+- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+- if test "$*" = "X"; then
+- # -L didn't work.
+- set X `ls -t $srcdir/configure conftestfile`
+- fi
+- if test "$*" != "X $srcdir/configure conftestfile" \
+- && test "$*" != "X conftestfile $srcdir/configure"; then
++test "$program_prefix" != NONE &&
++ program_transform_name="s&^&$program_prefix&;$program_transform_name"
++# Use a double $ so make ignores it.
++test "$program_suffix" != NONE &&
++ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
++# Double any \ or $.
++# By default was `s,x,x', remove it if useless.
++ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
++program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
++
++# Expand $ac_aux_dir to an absolute path.
++am_aux_dir=`cd "$ac_aux_dir" && pwd`
++
++if test x"${MISSING+set}" != xset; then
++ case $am_aux_dir in
++ *\ * | *\ *)
++ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
++ *)
++ MISSING="\${SHELL} $am_aux_dir/missing" ;;
++ esac
++fi
++# Use eval to expand $SHELL
++if eval "$MISSING --is-lightweight"; then
++ am_missing_run="$MISSING "
++else
++ am_missing_run=
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
++$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
++fi
+
+- # If neither matched, then we have a broken ls. This can happen
+- # if, for instance, CONFIG_SHELL is bash and it inherits a
+- # broken ls alias from the environment. This has actually
+- # happened. Such a system could not be considered "sane".
+- { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
+-alias in your environment" 1>&2; exit 1; }
+- fi
++if test x"${install_sh+set}" != xset; then
++ case $am_aux_dir in
++ *\ * | *\ *)
++ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
++ *)
++ install_sh="\${SHELL} $am_aux_dir/install-sh"
++ esac
++fi
++
++# Installed binaries are usually stripped using 'strip' when the user
++# run "make install-strip". However 'strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the 'STRIP' environment variable to overrule this program.
++if test "$cross_compiling" != no; then
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
++set dummy ${ac_tool_prefix}strip; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_STRIP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$STRIP"; then
++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
+
+- test "$2" = conftestfile
+- )
+-then
+- # Ok.
+- :
++fi
++fi
++STRIP=$ac_cv_prog_STRIP
++if test -n "$STRIP"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
++$as_echo "$STRIP" >&6; }
+ else
+- { echo "configure: error: newly created file is older than distributed files!
+-Check your system clock" 1>&2; exit 1; }
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+-rm -f conftest*
+-echo "$ac_t""yes" 1>&6
+-if test "$program_transform_name" = s,x,x,; then
+- program_transform_name=
+-else
+- # Double any \ or $. echo might interpret backslashes.
+- cat <<\EOF_SED > conftestsed
+-s,\\,\\\\,g; s,\$,$$,g
+-EOF_SED
+- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+- rm -f conftestsed
++
++
+ fi
+-test "$program_prefix" != NONE &&
+- program_transform_name="s,^,${program_prefix},; $program_transform_name"
+-# Use a double $ so make ignores it.
+-test "$program_suffix" != NONE &&
+- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
++if test -z "$ac_cv_prog_STRIP"; then
++ ac_ct_STRIP=$STRIP
++ # Extract the first word of "strip", so it can be a program name with args.
++set dummy strip; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_STRIP"; then
++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_ac_ct_STRIP="strip"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
+
+-# sed with no file args requires a program.
+-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
++fi
++fi
++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
++if test -n "$ac_ct_STRIP"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
++$as_echo "$ac_ct_STRIP" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
+
+-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+-echo "configure:676: checking whether ${MAKE-make} sets \${MAKE}" >&5
+-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ if test "x$ac_ct_STRIP" = x; then
++ STRIP=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ STRIP=$ac_ct_STRIP
++ fi
+ else
+- cat > conftestmake <<\EOF
+-all:
+- @echo 'ac_maketemp="${MAKE}"'
+-EOF
+-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+-if test -n "$ac_maketemp"; then
+- eval ac_cv_prog_make_${ac_make}_set=yes
++ STRIP="$ac_cv_prog_STRIP"
++fi
++
++fi
++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
++$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
++if test -z "$MKDIR_P"; then
++ if ${ac_cv_path_mkdir+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_prog in mkdir gmkdir; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
++ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
++ 'mkdir (GNU coreutils) '* | \
++ 'mkdir (coreutils) '* | \
++ 'mkdir (fileutils) '4.1*)
++ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
++ break 3;;
++ esac
++ done
++ done
++ done
++IFS=$as_save_IFS
++
++fi
++
++ test -d ./--version && rmdir ./--version
++ if test "${ac_cv_path_mkdir+set}" = set; then
++ MKDIR_P="$ac_cv_path_mkdir -p"
++ else
++ # As a last resort, use the slow shell script. Don't cache a
++ # value for MKDIR_P within a source directory, because that will
++ # break other packages using the cache if that directory is
++ # removed, or if the value is a relative name.
++ MKDIR_P="$ac_install_sh -d"
++ fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
++$as_echo "$MKDIR_P" >&6; }
++
++for ac_prog in gawk mawk nawk awk
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_AWK+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$AWK"; then
++ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+ else
+- eval ac_cv_prog_make_${ac_make}_set=no
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_AWK="$ac_prog"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
+ fi
+-rm -f conftestmake
++AWK=$ac_cv_prog_AWK
++if test -n "$AWK"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
++$as_echo "$AWK" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
++
++
++ test -n "$AWK" && break
++done
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
++$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
++set x ${MAKE-make}
++ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
++if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat >conftest.make <<\_ACEOF
++SHELL = /bin/sh
++all:
++ @echo '@@@%%%=$(MAKE)=@@@%%%'
++_ACEOF
++# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
++case `${MAKE-make} -f conftest.make 2>/dev/null` in
++ *@@@%%%=?*=@@@%%%*)
++ eval ac_cv_prog_make_${ac_make}_set=yes;;
++ *)
++ eval ac_cv_prog_make_${ac_make}_set=no;;
++esac
++rm -f conftest.make
++fi
++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
+ SET_MAKE=
+ else
+- echo "$ac_t""no" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+ fi
+
++rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++ am__leading_dot=.
++else
++ am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
+
+-PACKAGE=lrzsz
++# Check whether --enable-silent-rules was given.
++if test "${enable_silent_rules+set}" = set; then :
++ enableval=$enable_silent_rules;
++fi
+
+-VERSION=0.12.20
++case $enable_silent_rules in # (((
++ yes) AM_DEFAULT_VERBOSITY=0;;
++ no) AM_DEFAULT_VERBOSITY=1;;
++ *) AM_DEFAULT_VERBOSITY=1;;
++esac
++am_make=${MAKE-make}
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
++$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
++if ${am_cv_make_support_nested_variables+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if $as_echo 'TRUE=$(BAR$(V))
++BAR0=false
++BAR1=true
++V=1
++am__doit:
++ @$(TRUE)
++.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
++ am_cv_make_support_nested_variables=yes
++else
++ am_cv_make_support_nested_variables=no
++fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
++$as_echo "$am_cv_make_support_nested_variables" >&6; }
++if test $am_cv_make_support_nested_variables = yes; then
++ AM_V='$(V)'
++ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
++else
++ AM_V=$AM_DEFAULT_VERBOSITY
++ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
++fi
++AM_BACKSLASH='\'
++
++if test "`cd $srcdir && pwd`" != "`pwd`"; then
++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
++ # is not polluted with repeated "-I."
++ am__isrc=' -I$(srcdir)'
++ # test to see if srcdir already configured
++ if test -f $srcdir/config.status; then
++ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
++ fi
++fi
+
+-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++ if (cygpath --version) >/dev/null 2>/dev/null; then
++ CYGPATH_W='cygpath -w'
++ else
++ CYGPATH_W=echo
++ fi
+ fi
+-cat >> confdefs.h <<EOF
++
++
++# Define the identity of the package.
++
++ PACKAGE=lrzsz
++ VERSION=0.12.20
++
++
++cat >>confdefs.h <<_ACEOF
+ #define PACKAGE "$PACKAGE"
+-EOF
++_ACEOF
+
+-cat >> confdefs.h <<EOF
++
++cat >>confdefs.h <<_ACEOF
+ #define VERSION "$VERSION"
+-EOF
++_ACEOF
+
++# Some tools Automake needs.
+
++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+-missing_dir=`cd $ac_aux_dir && pwd`
+-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+-echo "configure:722: checking for working aclocal" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+- ACLOCAL=aclocal
+- echo "$ac_t""found" 1>&6
+-else
+- ACLOCAL="$missing_dir/missing aclocal"
+- echo "$ac_t""missing" 1>&6
+-fi
+-
+-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+-echo "configure:735: checking for working autoconf" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+- AUTOCONF=autoconf
+- echo "$ac_t""found" 1>&6
+-else
+- AUTOCONF="$missing_dir/missing autoconf"
+- echo "$ac_t""missing" 1>&6
+-fi
+-
+-echo $ac_n "checking for working automake""... $ac_c" 1>&6
+-echo "configure:748: checking for working automake" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (automake --version) < /dev/null > /dev/null 2>&1; then
+- AUTOMAKE=automake
+- echo "$ac_t""found" 1>&6
+-else
+- AUTOMAKE="$missing_dir/missing automake"
+- echo "$ac_t""missing" 1>&6
+-fi
+-
+-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+-echo "configure:761: checking for working autoheader" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+- AUTOHEADER=autoheader
+- echo "$ac_t""found" 1>&6
+-else
+- AUTOHEADER="$missing_dir/missing autoheader"
+- echo "$ac_t""missing" 1>&6
+-fi
+-
+-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+-echo "configure:774: checking for working makeinfo" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+- MAKEINFO=makeinfo
+- echo "$ac_t""found" 1>&6
+-else
+- MAKEINFO="$missing_dir/missing makeinfo"
+- echo "$ac_t""missing" 1>&6
+-fi
++
++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
++
++
++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
++
++
++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
++
++
++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
++
++# For better backward compatibility. To be removed once Automake 1.9.x
++# dies out for good. For more background, see:
++# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
++# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
++mkdir_p='$(MKDIR_P)'
++
++# We need awk for the "check" target (and possibly the TAP driver). The
++# system "awk" is bad on some platforms.
++# Always define AMTAR for backward compatibility. Yes, it's still used
++# in the wild :-( We should find a proper way to deprecate it ...
++AMTAR='$${TAR-tar}'
+
+
++# We'll loop over all known methods to create a tar archive until one works.
++_am_tools='gnutar pax cpio none'
+
++am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+
++# POSIX will say in a future version that running "rm -f" with no argument
++# is OK; and we want to be able to make that assumption in our Makefile
++# recipes. So use an aggressive probe to check that the usage we want is
++# actually supported "in the wild" to an acceptable degree.
++# See automake bug#10828.
++# To make any issue more visible, cause the running configure to be aborted
++# by default if the 'rm' program in use doesn't match our expectations; the
++# user can still override this though.
++if rm -f && rm -fr && rm -rf; then : OK; else
++ cat >&2 <<'END'
++Oops!
++
++Your 'rm' program seems unable to run without file operands specified
++on the command line, even when the '-f' option is present. This is contrary
++to the behaviour of most rm programs out there, and not conforming with
++the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
++
++Please tell bug-automake@gnu.org about your system, including the value
++of your $PATH and any error possibly output before this message. This
++can help us improve future automake versions.
++
++END
++ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
++ echo 'Configuration will proceed anyway, since you have set the' >&2
++ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
++ echo >&2
++ else
++ cat >&2 <<'END'
++Aborting the configuration process, to ensure you take notice of the issue.
++
++You can download and install GNU coreutils to get an 'rm' implementation
++that behaves properly: <https://www.gnu.org/software/coreutils/>.
++
++If you want to complete the configuration process using your problematic
++'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
++to "yes", and re-run configure.
++
++END
++ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
++ fi
++fi
++
++ac_config_headers="$ac_config_headers config.h"
++
++
++
++
++
+ PACKAGE_VERSION="$PACKAGE-$VERSION"
+-cat >> confdefs.h <<EOF
++cat >>confdefs.h <<_ACEOF
+ #define PACKAGE "$PACKAGE"
+-EOF
++_ACEOF
+
+-cat >> confdefs.h <<EOF
++cat >>confdefs.h <<_ACEOF
+ #define VERSION "$VERSION"
+-EOF
++_ACEOF
+
+-cat >> confdefs.h <<EOF
++cat >>confdefs.h <<_ACEOF
+ #define PACKAGE_VERSION "$PACKAGE_VERSION"
+-EOF
++_ACEOF
+
+
+
+@@ -818,70 +2861,58 @@ case $VERSION in
+ esac
+
+
+-# Check whether --enable-timesync or --disable-timesync was given.
+-if test "${enable_timesync+set}" = set; then
+- enableval="$enable_timesync"
+- if test "$enableval" = "no" ; then
++# Check whether --enable-timesync was given.
++if test "${enable_timesync+set}" = set; then :
++ enableval=$enable_timesync; if test "$enableval" = "no" ; then
+ :
+ else
+- cat >> confdefs.h <<\EOF
+-#define ENABLE_TIMESYNC 1
+-EOF
++ $as_echo "#define ENABLE_TIMESYNC 1" >>confdefs.h
+
+ fi
+ else
+- cat >> confdefs.h <<\EOF
+-#define ENABLE_TIMESYNC 1
+-EOF
++ $as_echo "#define ENABLE_TIMESYNC 1" >>confdefs.h
+
+ fi
+
+
+-# Check whether --enable-pubdir or --disable-pubdir was given.
+-if test "${enable_pubdir+set}" = set; then
+- enableval="$enable_pubdir"
+- if test "$enableval" = "no" ; then
+- :
+- else
+- cat >> confdefs.h <<EOF
++# Check whether --enable-pubdir was given.
++if test "${enable_pubdir+set}" = set; then :
++ enableval=$enable_pubdir; if test "$enableval" = "no" ; then
++ :
++ else
++ cat >>confdefs.h <<_ACEOF
+ #define PUBDIR "$enableval"
+-EOF
++_ACEOF
+
+ fi
+ fi
+
+-# Check whether --enable-mkdir or --disable-mkdir was given.
+-if test "${enable_mkdir+set}" = set; then
+- enableval="$enable_mkdir"
+- if test "$enableval" = "no" ; then
++# Check whether --enable-mkdir was given.
++if test "${enable_mkdir+set}" = set; then :
++ enableval=$enable_mkdir; if test "$enableval" = "no" ; then
+ :
+ else
+- cat >> confdefs.h <<\EOF
+-#define ENABLE_MKDIR 1
+-EOF
++ $as_echo "#define ENABLE_MKDIR 1" >>confdefs.h
+
+ fi
+ else
+- cat >> confdefs.h <<\EOF
+-#define ENABLE_MKDIR 1
+-EOF
++ $as_echo "#define ENABLE_MKDIR 1" >>confdefs.h
+
+ fi
+
+-# Check whether --enable-syslog or --disable-syslog was given.
+-if test "${enable_syslog+set}" = set; then
+- enableval="$enable_syslog"
+-
+- if test "$enableval" = "no" ; then
++# Check whether --enable-syslog was given.
++if test "${enable_syslog+set}" = set; then :
++ enableval=$enable_syslog;
++ if test "$enableval" = "no" ; then
+ :
+ else
+ case "$enableval" in
+ *,*)
+ level=`echo $enableval|sed -e 's/^.*,//'`
+ fac=`echo $enableval|sed -e 's/,.*$//'`
+- cat >> confdefs.h <<EOF
++ cat >>confdefs.h <<_ACEOF
+ #define ENABLE_SYSLOG $fac
+-EOF
++_ACEOF
+
+ ;;
+ *)
+@@ -890,568 +2921,1562 @@ EOF
+ ;;
+ esac
+ if test "$level" = "force" ; then
+- cat >> confdefs.h <<\EOF
+-#define ENABLE_SYSLOG_FORCE 1
+-EOF
++ $as_echo "#define ENABLE_SYSLOG_FORCE 1" >>confdefs.h
+
+- else
++ else
+ if test "$level" = "optional" ; then
+ :
+ else
+- cat >> confdefs.h <<\EOF
+-#define ENABLE_SYSLOG_DEFAULT 1
+-EOF
++ $as_echo "#define ENABLE_SYSLOG_DEFAULT 1" >>confdefs.h
+
+ fi
+ fi
+ fi
+ else
+-
+- cat >> confdefs.h <<\EOF
+-#define ENABLE_SYSLOG_DEFAULT 1
+-EOF
++
++ $as_echo "#define ENABLE_SYSLOG_DEFAULT 1" >>confdefs.h
+
+ lookup_facility=LOG_UUCP
+-
++
+ fi
+
+
+-# Extract the first word of "gcc", so it can be a program name with args.
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
++set dummy ${ac_tool_prefix}gcc; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_CC+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$CC"; then
++ ac_cv_prog_CC="$CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_CC="${ac_tool_prefix}gcc"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
++$as_echo "$CC" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_CC"; then
++ ac_ct_CC=$CC
++ # Extract the first word of "gcc", so it can be a program name with args.
+ set dummy gcc; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:923: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_CC+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_CC"; then
++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_ac_ct_CC="gcc"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
++$as_echo "$ac_ct_CC" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_CC" = x; then
++ CC=""
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ CC=$ac_ct_CC
++ fi
++else
++ CC="$ac_cv_prog_CC"
++fi
++
++if test -z "$CC"; then
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
++set dummy ${ac_tool_prefix}cc; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_CC+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+- for ac_dir in $PATH; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_CC="gcc"
+- break
+- fi
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_CC="${ac_tool_prefix}cc"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
+ done
+- IFS="$ac_save_ifs"
++IFS=$as_save_IFS
++
+ fi
+ fi
+-CC="$ac_cv_prog_CC"
++CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- echo "$ac_t""$CC" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
++$as_echo "$CC" >&6; }
+ else
+- echo "$ac_t""no" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
++
++ fi
++fi
+ if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+ set dummy cc; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:952: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_CC+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ ac_prog_rejected=no
+- for ac_dir in $PATH; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+- ac_prog_rejected=yes
+- continue
+- fi
+- ac_cv_prog_CC="cc"
+- break
+- fi
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
++ ac_prog_rejected=yes
++ continue
++ fi
++ ac_cv_prog_CC="cc"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
+ done
+- IFS="$ac_save_ifs"
++IFS=$as_save_IFS
++
+ if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+- if test $# -gt 0; then
++ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+- set dummy "$ac_dir/$ac_word" "$@"
+- shift
+- ac_cv_prog_CC="$@"
++ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+ fi
+ fi
+ fi
+-CC="$ac_cv_prog_CC"
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
++$as_echo "$CC" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$CC"; then
++ if test -n "$ac_tool_prefix"; then
++ for ac_prog in cl.exe
++ do
++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_CC+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$CC"; then
++ ac_cv_prog_CC="$CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- echo "$ac_t""$CC" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
++$as_echo "$CC" >&6; }
+ else
+- echo "$ac_t""no" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
++
++ test -n "$CC" && break
++ done
++fi
++if test -z "$CC"; then
++ ac_ct_CC=$CC
++ for ac_prog in cl.exe
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_CC+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_CC"; then
++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_ac_ct_CC="$ac_prog"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
++$as_echo "$ac_ct_CC" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+-echo "configure:1000: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+-ac_ext=c
+-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+-ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+-cross_compiling=$ac_cv_prog_cc_cross
+-
+-cat > conftest.$ac_ext <<EOF
+-#line 1010 "configure"
+-#include "confdefs.h"
+-main(){return(0);}
+-EOF
+-if { (eval echo configure:1014: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- ac_cv_prog_cc_works=yes
+- # If we can't run a trivial program, we are probably using a cross compiler.
+- if (./conftest; exit) 2>/dev/null; then
+- ac_cv_prog_cc_cross=no
++ test -n "$ac_ct_CC" && break
++done
++
++ if test "x$ac_ct_CC" = x; then
++ CC=""
+ else
+- ac_cv_prog_cc_cross=yes
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ CC=$ac_ct_CC
+ fi
++fi
++
++fi
++
++
++test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "no acceptable C compiler found in \$PATH
++See \`config.log' for more details" "$LINENO" 5; }
++
++# Provide some information about the compiler.
++$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
++set X $ac_compile
++ac_compiler=$2
++for ac_option in --version -v -V -qversion; do
++ { { ac_try="$ac_compiler $ac_option >&5"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
++ ac_status=$?
++ if test -s conftest.err; then
++ sed '10a\
++... rest of stderr output deleted ...
++ 10q' conftest.err >conftest.er1
++ cat conftest.er1 >&5
++ fi
++ rm -f conftest.er1 conftest.err
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++done
++
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++ac_clean_files_save=$ac_clean_files
++ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
++# Try to create an executable without -o first, disregard a.out.
++# It will help us diagnose broken compilers, and finding out an intuition
++# of exeext.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
++$as_echo_n "checking whether the C compiler works... " >&6; }
++ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
++
++# The possible output files:
++ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
++
++ac_rmfiles=
++for ac_file in $ac_files
++do
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
++ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
++ esac
++done
++rm -f $ac_rmfiles
++
++if { { ac_try="$ac_link_default"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_link_default") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then :
++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
++# in a Makefile. We should not override ac_cv_exeext if it was cached,
++# so that the user can short-circuit this test for compilers unknown to
++# Autoconf.
++for ac_file in $ac_files ''
++do
++ test -f "$ac_file" || continue
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
++ ;;
++ [ab].out )
++ # We found the default executable, but exeext='' is most
++ # certainly right.
++ break;;
++ *.* )
++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
++ then :; else
++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
++ fi
++ # We set ac_cv_exeext here because the later test for it is not
++ # safe: cross compilers may not add the suffix if given an `-o'
++ # argument, so we may need to know it at that point already.
++ # Even if this section looks crufty: it has the advantage of
++ # actually working.
++ break;;
++ * )
++ break;;
++ esac
++done
++test "$ac_cv_exeext" = no && ac_cv_exeext=
++
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- ac_cv_prog_cc_works=no
++ ac_file=''
+ fi
+-rm -fr conftest*
++if test -z "$ac_file"; then :
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++$as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error 77 "C compiler cannot create executables
++See \`config.log' for more details" "$LINENO" 5; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
++$as_echo_n "checking for C compiler default output file name... " >&6; }
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
++$as_echo "$ac_file" >&6; }
++ac_exeext=$ac_cv_exeext
++
++rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
++ac_clean_files=$ac_clean_files_save
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
++$as_echo_n "checking for suffix of executables... " >&6; }
++if { { ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_link") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then :
++ # If both `conftest.exe' and `conftest' are `present' (well, observable)
++# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
++# work properly (i.e., refer to `conftest.exe'), while it won't with
++# `rm'.
++for ac_file in conftest.exe conftest conftest.*; do
++ test -f "$ac_file" || continue
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
++ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
++ break;;
++ * ) break;;
++ esac
++done
++else
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "cannot compute suffix of executables: cannot compile and link
++See \`config.log' for more details" "$LINENO" 5; }
++fi
++rm -f conftest conftest$ac_cv_exeext
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
++$as_echo "$ac_cv_exeext" >&6; }
++
++rm -f conftest.$ac_ext
++EXEEXT=$ac_cv_exeext
++ac_exeext=$EXEEXT
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <stdio.h>
++int
++main ()
++{
++FILE *f = fopen ("conftest.out", "w");
++ return ferror (f) || fclose (f) != 0;
+
+-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+-if test $ac_cv_prog_cc_works = no; then
+- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
++ ;
++ return 0;
++}
++_ACEOF
++ac_clean_files="$ac_clean_files conftest.out"
++# Check that the compiler produces executables we can run. If not, either
++# the compiler is broken, or we cross compile.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
++$as_echo_n "checking whether we are cross compiling... " >&6; }
++if test "$cross_compiling" != yes; then
++ { { ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_link") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++ if { ac_try='./conftest$ac_cv_exeext'
++ { { case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_try") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; }; then
++ cross_compiling=no
++ else
++ if test "$cross_compiling" = maybe; then
++ cross_compiling=yes
++ else
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "cannot run C compiled programs.
++If you meant to cross compile, use \`--host'.
++See \`config.log' for more details" "$LINENO" 5; }
++ fi
++ fi
+ fi
+-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+-echo "configure:1034: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+-cross_compiling=$ac_cv_prog_cc_cross
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
++$as_echo "$cross_compiling" >&6; }
+
+-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+-echo "configure:1039: checking whether we are using GNU C" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
++ac_clean_files=$ac_clean_files_save
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
++$as_echo_n "checking for suffix of object files... " >&6; }
++if ${ac_cv_objext+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- cat > conftest.c <<EOF
+-#ifdef __GNUC__
+- yes;
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.o conftest.obj
++if { { ac_try="$ac_compile"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_compile") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then :
++ for ac_file in conftest.o conftest.obj conftest.*; do
++ test -f "$ac_file" || continue;
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
++ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
++ break;;
++ esac
++done
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "cannot compute suffix of object files: cannot compile
++See \`config.log' for more details" "$LINENO" 5; }
++fi
++rm -f conftest.$ac_cv_objext conftest.$ac_ext
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
++$as_echo "$ac_cv_objext" >&6; }
++OBJEXT=$ac_cv_objext
++ac_objext=$OBJEXT
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
++$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
++if ${ac_cv_c_compiler_gnu+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++#ifndef __GNUC__
++ choke me
+ #endif
+-EOF
+-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1048: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+- ac_cv_prog_gcc=yes
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_compiler_gnu=yes
+ else
+- ac_cv_prog_gcc=no
+-fi
++ ac_compiler_gnu=no
+ fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+-
+-if test $ac_cv_prog_gcc = yes; then
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
++$as_echo "$ac_cv_c_compiler_gnu" >&6; }
++if test $ac_compiler_gnu = yes; then
+ GCC=yes
+- ac_test_CFLAGS="${CFLAGS+set}"
+- ac_save_CFLAGS="$CFLAGS"
+- CFLAGS=
+- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+-echo "configure:1063: checking whether ${CC-cc} accepts -g" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+ else
+- echo 'void f(){}' > conftest.c
+-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
++ GCC=
++fi
++ac_test_CFLAGS=${CFLAGS+set}
++ac_save_CFLAGS=$CFLAGS
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
++$as_echo_n "checking whether $CC accepts -g... " >&6; }
++if ${ac_cv_prog_cc_g+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_save_c_werror_flag=$ac_c_werror_flag
++ ac_c_werror_flag=yes
++ ac_cv_prog_cc_g=no
++ CFLAGS="-g"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+ else
+- ac_cv_prog_cc_g=no
+-fi
+-rm -f conftest*
++ CFLAGS=""
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+
+-fi
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++
++else
++ ac_c_werror_flag=$ac_save_c_werror_flag
++ CFLAGS="-g"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+
+-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+- if test "$ac_test_CFLAGS" = set; then
+- CFLAGS="$ac_save_CFLAGS"
+- elif test $ac_cv_prog_cc_g = yes; then
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_prog_cc_g=yes
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ac_c_werror_flag=$ac_save_c_werror_flag
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
++$as_echo "$ac_cv_prog_cc_g" >&6; }
++if test "$ac_test_CFLAGS" = set; then
++ CFLAGS=$ac_save_CFLAGS
++elif test $ac_cv_prog_cc_g = yes; then
++ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
++ CFLAGS="-g"
++ fi
++else
++ if test "$GCC" = yes; then
+ CFLAGS="-O2"
++ else
++ CFLAGS=
++ fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
++$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
++if ${ac_cv_prog_cc_c89+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_cv_prog_cc_c89=no
++ac_save_CC=$CC
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <stdarg.h>
++#include <stdio.h>
++struct stat;
++/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
++struct buf { int x; };
++FILE * (*rcsopen) (struct buf *, struct stat *, int);
++static char *e (p, i)
++ char **p;
++ int i;
++{
++ return p[i];
++}
++static char *f (char * (*g) (char **, int), char **p, ...)
++{
++ char *s;
++ va_list v;
++ va_start (v,p);
++ s = g (p, va_arg (v,int));
++ va_end (v);
++ return s;
++}
++
++/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
++ function prototypes and stuff, but not '\xHH' hex character constants.
++ These don't provoke an error unfortunately, instead are silently treated
++ as 'x'. The following induces an error, until -std is added to get
++ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
++ array size at least. It's necessary to write '\x00'==0 to get something
++ that's true only with -std. */
++int osf4_cc_array ['\x00' == 0 ? 1 : -1];
++
++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
++ inside strings and character constants. */
++#define FOO(x) 'x'
++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
++
++int test (int i, double x);
++struct s1 {int (*f) (int a);};
++struct s2 {int (*f) (double a);};
++int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
++int argc;
++char **argv;
++int
++main ()
++{
++return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
++ ;
++ return 0;
++}
++_ACEOF
++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
++do
++ CC="$ac_save_CC $ac_arg"
++ if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_prog_cc_c89=$ac_arg
++fi
++rm -f core conftest.err conftest.$ac_objext
++ test "x$ac_cv_prog_cc_c89" != "xno" && break
++done
++rm -f conftest.$ac_ext
++CC=$ac_save_CC
++
++fi
++# AC_CACHE_VAL
++case "x$ac_cv_prog_cc_c89" in
++ x)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
++$as_echo "none needed" >&6; } ;;
++ xno)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
++$as_echo "unsupported" >&6; } ;;
++ *)
++ CC="$CC $ac_cv_prog_cc_c89"
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
++$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
++esac
++if test "x$ac_cv_prog_cc_c89" != xno; then :
++
++fi
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
++$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
++if ${am_cv_prog_cc_c_o+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++ # Make sure it works both with $CC and with simple cc.
++ # Following AC_PROG_CC_C_O, we do the test twice because some
++ # compilers refuse to overwrite an existing .o file with -o,
++ # though they will create one.
++ am_cv_prog_cc_c_o=yes
++ for am_i in 1 2; do
++ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
++ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } \
++ && test -f conftest2.$ac_objext; then
++ : OK
++ else
++ am_cv_prog_cc_c_o=no
++ break
++ fi
++ done
++ rm -f core conftest*
++ unset am_i
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
++$as_echo "$am_cv_prog_cc_c_o" >&6; }
++if test "$am_cv_prog_cc_c_o" != yes; then
++ # Losing compiler, so override with the script.
++ # FIXME: It is wrong to rewrite CC.
++ # But if we don't then we get into trouble of one sort or another.
++ # A longer-term fix would be to have automake use am__CC in this case,
++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
++ CC="$am_aux_dir/compile $CC"
++fi
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++DEPDIR="${am__leading_dot}deps"
++
++ac_config_commands="$ac_config_commands depfiles"
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5
++$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; }
++cat > confinc.mk << 'END'
++am__doit:
++ @echo this is the am__doit target >confinc.out
++.PHONY: am__doit
++END
++am__include="#"
++am__quote=
++# BSD make does it like this.
++echo '.include "confinc.mk" # ignored' > confmf.BSD
++# Other make implementations (GNU, Solaris 10, AIX) do it like this.
++echo 'include confinc.mk # ignored' > confmf.GNU
++_am_result=no
++for s in GNU BSD; do
++ { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5
++ (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }
++ case $?:`cat confinc.out 2>/dev/null` in #(
++ '0:this is the am__doit target') :
++ case $s in #(
++ BSD) :
++ am__include='.include' am__quote='"' ;; #(
++ *) :
++ am__include='include' am__quote='' ;;
++esac ;; #(
++ *) :
++ ;;
++esac
++ if test "$am__include" != "#"; then
++ _am_result="yes ($s style)"
++ break
+ fi
++done
++rm -f confinc.* confmf.*
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5
++$as_echo "${_am_result}" >&6; }
++
++# Check whether --enable-dependency-tracking was given.
++if test "${enable_dependency_tracking+set}" = set; then :
++ enableval=$enable_dependency_tracking;
++fi
++
++if test "x$enable_dependency_tracking" != xno; then
++ am_depcomp="$ac_aux_dir/depcomp"
++ AMDEPBACKSLASH='\'
++ am__nodep='_no'
++fi
++ if test "x$enable_dependency_tracking" != xno; then
++ AMDEP_TRUE=
++ AMDEP_FALSE='#'
++else
++ AMDEP_TRUE='#'
++ AMDEP_FALSE=
++fi
++
++
++
++depcc="$CC" am_compiler_list=
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
++$as_echo_n "checking dependency style of $depcc... " >&6; }
++if ${am_cv_CC_dependencies_compiler_type+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++ # We make a subdir and do the tests there. Otherwise we can end up
++ # making bogus files that we don't know about and never remove. For
++ # instance it was reported that on HP-UX the gcc test will end up
++ # making a dummy file named 'D' -- because '-MD' means "put the output
++ # in D".
++ rm -rf conftest.dir
++ mkdir conftest.dir
++ # Copy depcomp to subdir because otherwise we won't find it if we're
++ # using a relative directory.
++ cp "$am_depcomp" conftest.dir
++ cd conftest.dir
++ # We will build objects and dependencies in a subdirectory because
++ # it helps to detect inapplicable dependency modes. For instance
++ # both Tru64's cc and ICC support -MD to output dependencies as a
++ # side effect of compilation, but ICC will put the dependencies in
++ # the current directory while Tru64 will put them in the object
++ # directory.
++ mkdir sub
++
++ am_cv_CC_dependencies_compiler_type=none
++ if test "$am_compiler_list" = ""; then
++ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
++ fi
++ am__universal=false
++ case " $depcc " in #(
++ *\ -arch\ *\ -arch\ *) am__universal=true ;;
++ esac
++
++ for depmode in $am_compiler_list; do
++ # Setup a source with many dependencies, because some compilers
++ # like to wrap large dependency lists on column 80 (with \), and
++ # we should not choose a depcomp mode which is confused by this.
++ #
++ # We need to recreate these files for each test, as the compiler may
++ # overwrite some of them when testing with obscure command lines.
++ # This happens at least with the AIX C compiler.
++ : > sub/conftest.c
++ for i in 1 2 3 4 5 6; do
++ echo '#include "conftst'$i'.h"' >> sub/conftest.c
++ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
++ # Solaris 10 /bin/sh.
++ echo '/* dummy */' > sub/conftst$i.h
++ done
++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
++
++ # We check with '-c' and '-o' for the sake of the "dashmstdout"
++ # mode. It turns out that the SunPro C++ compiler does not properly
++ # handle '-M -o', and we need to detect this. Also, some Intel
++ # versions had trouble with output in subdirs.
++ am__obj=sub/conftest.${OBJEXT-o}
++ am__minus_obj="-o $am__obj"
++ case $depmode in
++ gcc)
++ # This depmode causes a compiler race in universal mode.
++ test "$am__universal" = false || continue
++ ;;
++ nosideeffect)
++ # After this tag, mechanisms are not by side-effect, so they'll
++ # only be used when explicitly requested.
++ if test "x$enable_dependency_tracking" = xyes; then
++ continue
++ else
++ break
++ fi
++ ;;
++ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
++ # This compiler won't grok '-c -o', but also, the minuso test has
++ # not run yet. These depmodes are late enough in the game, and
++ # so weak that their functioning should not be impacted.
++ am__obj=conftest.${OBJEXT-o}
++ am__minus_obj=
++ ;;
++ none) break ;;
++ esac
++ if depmode=$depmode \
++ source=sub/conftest.c object=$am__obj \
++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
++ >/dev/null 2>conftest.err &&
++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++ # icc doesn't choke on unknown options, it will just issue warnings
++ # or remarks (even with -Werror). So we grep stderr for any message
++ # that says an option was ignored or not supported.
++ # When given -MP, icc 7.0 and 7.1 complain thusly:
++ # icc: Command line warning: ignoring option '-M'; no argument required
++ # The diagnosis changed in icc 8.0:
++ # icc: Command line remark: option '-MP' not supported
++ if (grep 'ignoring option' conftest.err ||
++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++ am_cv_CC_dependencies_compiler_type=$depmode
++ break
++ fi
++ fi
++ done
++
++ cd ..
++ rm -rf conftest.dir
+ else
+- GCC=
+- test "${CFLAGS+set}" = set || CFLAGS="-g"
++ am_cv_CC_dependencies_compiler_type=none
++fi
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
++$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
++
++ if
++ test "x$enable_dependency_tracking" != xno \
++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
++ am__fastdepCC_TRUE=
++ am__fastdepCC_FALSE='#'
++else
++ am__fastdepCC_TRUE='#'
++ am__fastdepCC_FALSE=
+ fi
+
+-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+-echo "configure:1091: checking how to run the C preprocessor" >&5
++
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
++$as_echo_n "checking how to run the C preprocessor... " >&6; }
+ # On Suns, sometimes $CPP names a directory.
+ if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+ fi
+ if test -z "$CPP"; then
+-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ if ${ac_cv_prog_CPP+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- # This must be in double quotes, not single quotes, because CPP may get
+- # substituted into the Makefile and "${CC-cc}" will confuse make.
+- CPP="${CC-cc} -E"
++ # Double quotes because CPP needs to be expanded
++ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
++ do
++ ac_preproc_ok=false
++for ac_c_preproc_warn_flag in '' yes
++do
++ # Use a header file that comes with gcc, so configuring glibc
++ # with a fresh cross-compiler works.
++ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+- # not just through cpp.
+- cat > conftest.$ac_ext <<EOF
+-#line 1106 "configure"
+-#include "confdefs.h"
+-#include <assert.h>
+-Syntax Error
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:1112: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- :
++ # not just through cpp. "Syntax error" is here to catch this case.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++ Syntax error
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
++
++else
++ # Broken: fails on valid input.
++continue
++fi
++rm -f conftest.err conftest.i conftest.$ac_ext
++
++ # OK, works on sane cases. Now check whether nonexistent headers
++ # can be detected and how.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <ac_nonexistent.h>
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
++ # Broken: success on invalid input.
++continue
++else
++ # Passes both tests.
++ac_preproc_ok=:
++break
++fi
++rm -f conftest.err conftest.i conftest.$ac_ext
++
++done
++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
++rm -f conftest.i conftest.err conftest.$ac_ext
++if $ac_preproc_ok; then :
++ break
++fi
++
++ done
++ ac_cv_prog_CPP=$CPP
++
++fi
++ CPP=$ac_cv_prog_CPP
+ else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- CPP="${CC-cc} -E -traditional-cpp"
+- cat > conftest.$ac_ext <<EOF
+-#line 1123 "configure"
+-#include "confdefs.h"
+-#include <assert.h>
+-Syntax Error
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:1129: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- :
++ ac_cv_prog_CPP=$CPP
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
++$as_echo "$CPP" >&6; }
++ac_preproc_ok=false
++for ac_c_preproc_warn_flag in '' yes
++do
++ # Use a header file that comes with gcc, so configuring glibc
++ # with a fresh cross-compiler works.
++ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ # <limits.h> exists even on freestanding compilers.
++ # On the NeXT, cc -E runs the code through the compiler's parser,
++ # not just through cpp. "Syntax error" is here to catch this case.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++ Syntax error
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
++
++else
++ # Broken: fails on valid input.
++continue
++fi
++rm -f conftest.err conftest.i conftest.$ac_ext
++
++ # OK, works on sane cases. Now check whether nonexistent headers
++ # can be detected and how.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <ac_nonexistent.h>
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
++ # Broken: success on invalid input.
++continue
++else
++ # Passes both tests.
++ac_preproc_ok=:
++break
++fi
++rm -f conftest.err conftest.i conftest.$ac_ext
++
++done
++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
++rm -f conftest.i conftest.err conftest.$ac_ext
++if $ac_preproc_ok; then :
++
+ else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- CPP=/lib/cpp
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
++See \`config.log' for more details" "$LINENO" 5; }
+ fi
+-rm -f conftest*
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
++$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
++if ${ac_cv_path_GREP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -z "$GREP"; then
++ ac_path_GREP_found=false
++ # Loop through the user's path and test for each of PROGNAME-LIST
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_prog in grep ggrep; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
++ as_fn_executable_p "$ac_path_GREP" || continue
++# Check for GNU ac_path_GREP and select it if it is found.
++ # Check for GNU $ac_path_GREP
++case `"$ac_path_GREP" --version 2>&1` in
++*GNU*)
++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
++*)
++ ac_count=0
++ $as_echo_n 0123456789 >"conftest.in"
++ while :
++ do
++ cat "conftest.in" "conftest.in" >"conftest.tmp"
++ mv "conftest.tmp" "conftest.in"
++ cp "conftest.in" "conftest.nl"
++ $as_echo 'GREP' >> "conftest.nl"
++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
++ as_fn_arith $ac_count + 1 && ac_count=$as_val
++ if test $ac_count -gt ${ac_path_GREP_max-0}; then
++ # Best one so far, save it but keep looking for a better one
++ ac_cv_path_GREP="$ac_path_GREP"
++ ac_path_GREP_max=$ac_count
++ fi
++ # 10*(2^10) chars as input seems more than enough
++ test $ac_count -gt 10 && break
++ done
++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
++esac
++
++ $ac_path_GREP_found && break 3
++ done
++ done
++ done
++IFS=$as_save_IFS
++ if test -z "$ac_cv_path_GREP"; then
++ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
++ fi
++else
++ ac_cv_path_GREP=$GREP
+ fi
+-rm -f conftest*
+- ac_cv_prog_CPP="$CPP"
++
+ fi
+- CPP="$ac_cv_prog_CPP"
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
++$as_echo "$ac_cv_path_GREP" >&6; }
++ GREP="$ac_cv_path_GREP"
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
++$as_echo_n "checking for egrep... " >&6; }
++if ${ac_cv_path_EGREP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
++ then ac_cv_path_EGREP="$GREP -E"
++ else
++ if test -z "$EGREP"; then
++ ac_path_EGREP_found=false
++ # Loop through the user's path and test for each of PROGNAME-LIST
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_prog in egrep; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
++ as_fn_executable_p "$ac_path_EGREP" || continue
++# Check for GNU ac_path_EGREP and select it if it is found.
++ # Check for GNU $ac_path_EGREP
++case `"$ac_path_EGREP" --version 2>&1` in
++*GNU*)
++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
++*)
++ ac_count=0
++ $as_echo_n 0123456789 >"conftest.in"
++ while :
++ do
++ cat "conftest.in" "conftest.in" >"conftest.tmp"
++ mv "conftest.tmp" "conftest.in"
++ cp "conftest.in" "conftest.nl"
++ $as_echo 'EGREP' >> "conftest.nl"
++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
++ as_fn_arith $ac_count + 1 && ac_count=$as_val
++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
++ # Best one so far, save it but keep looking for a better one
++ ac_cv_path_EGREP="$ac_path_EGREP"
++ ac_path_EGREP_max=$ac_count
++ fi
++ # 10*(2^10) chars as input seems more than enough
++ test $ac_count -gt 10 && break
++ done
++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
++esac
++
++ $ac_path_EGREP_found && break 3
++ done
++ done
++ done
++IFS=$as_save_IFS
++ if test -z "$ac_cv_path_EGREP"; then
++ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
++ fi
+ else
+- ac_cv_prog_CPP="$CPP"
++ ac_cv_path_EGREP=$EGREP
+ fi
+-echo "$ac_t""$CPP" 1>&6
+
+-if test $ac_cv_prog_gcc = yes; then
+- echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
+-echo "configure:1153: checking whether ${CC-cc} needs -traditional" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
++$as_echo "$ac_cv_path_EGREP" >&6; }
++ EGREP="$ac_cv_path_EGREP"
++
++
++if test $ac_cv_c_compiler_gnu = yes; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5
++$as_echo_n "checking whether $CC needs -traditional... " >&6; }
++if ${ac_cv_prog_gcc_traditional+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+ ac_pattern="Autoconf.*'x'"
+- cat > conftest.$ac_ext <<EOF
+-#line 1159 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <sgtty.h>
+ Autoconf TIOCGETP
+-EOF
++_ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "$ac_pattern" >/dev/null 2>&1; then
+- rm -rf conftest*
++ $EGREP "$ac_pattern" >/dev/null 2>&1; then :
+ ac_cv_prog_gcc_traditional=yes
+ else
+- rm -rf conftest*
+ ac_cv_prog_gcc_traditional=no
+ fi
+ rm -f conftest*
+
+
+ if test $ac_cv_prog_gcc_traditional = no; then
+- cat > conftest.$ac_ext <<EOF
+-#line 1177 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <termio.h>
+ Autoconf TCGETA
+-EOF
++_ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "$ac_pattern" >/dev/null 2>&1; then
+- rm -rf conftest*
++ $EGREP "$ac_pattern" >/dev/null 2>&1; then :
+ ac_cv_prog_gcc_traditional=yes
+ fi
+ rm -f conftest*
+
+ fi
+ fi
+-
+-echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5
++$as_echo "$ac_cv_prog_gcc_traditional" >&6; }
+ if test $ac_cv_prog_gcc_traditional = yes; then
+ CC="$CC -traditional"
+ fi
+ fi
+
+-# Extract the first word of "ranlib", so it can be a program name with args.
+-set dummy ranlib; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:1201: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
++set dummy ${ac_tool_prefix}ranlib; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_RANLIB+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+- for ac_dir in $PATH; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_RANLIB="ranlib"
+- break
+- fi
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
+ done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
++IFS=$as_save_IFS
++
+ fi
+ fi
+-RANLIB="$ac_cv_prog_RANLIB"
++RANLIB=$ac_cv_prog_RANLIB
+ if test -n "$RANLIB"; then
+- echo "$ac_t""$RANLIB" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
++$as_echo "$RANLIB" >&6; }
+ else
+- echo "$ac_t""no" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+-echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
+-echo "configure:1228: checking for POSIXized ISC" >&5
+-if test -d /etc/conf/kconfig.d &&
+- grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
+-then
+- echo "$ac_t""yes" 1>&6
+- ISC=yes # If later tests want to check for ISC.
+- cat >> confdefs.h <<\EOF
+-#define _POSIX_SOURCE 1
+-EOF
+
+- if test "$GCC" = yes; then
+- CC="$CC -posix"
+- else
+- CC="$CC -Xp"
+- fi
+-else
+- echo "$ac_t""no" 1>&6
+- ISC=
+ fi
+-
+-echo $ac_n "checking for AIX""... $ac_c" 1>&6
+-echo "configure:1249: checking for AIX" >&5
+-cat > conftest.$ac_ext <<EOF
+-#line 1251 "configure"
+-#include "confdefs.h"
+-#ifdef _AIX
+- yes
+-#endif
+-
+-EOF
+-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "yes" >/dev/null 2>&1; then
+- rm -rf conftest*
+- echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF
+-#define _ALL_SOURCE 1
+-EOF
+-
++if test -z "$ac_cv_prog_RANLIB"; then
++ ac_ct_RANLIB=$RANLIB
++ # Extract the first word of "ranlib", so it can be a program name with args.
++set dummy ranlib; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- rm -rf conftest*
+- echo "$ac_t""no" 1>&6
+-fi
+-rm -f conftest*
+-
++ if test -n "$ac_ct_RANLIB"; then
++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_ac_ct_RANLIB="ranlib"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
+
+-ac_safe=`echo "minix/config.h" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for minix/config.h""... $ac_c" 1>&6
+-echo "configure:1274: checking for minix/config.h" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 1279 "configure"
+-#include "confdefs.h"
+-#include <minix/config.h>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:1284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
+-else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
+ fi
+-rm -f conftest*
+ fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- MINIX=yes
++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
++if test -n "$ac_ct_RANLIB"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
++$as_echo "$ac_ct_RANLIB" >&6; }
+ else
+- echo "$ac_t""no" 1>&6
+-MINIX=
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+-if test "$MINIX" = yes; then
+- cat >> confdefs.h <<\EOF
+-#define _POSIX_SOURCE 1
+-EOF
+-
+- cat >> confdefs.h <<\EOF
+-#define _POSIX_1_SOURCE 2
+-EOF
+-
+- cat >> confdefs.h <<\EOF
+-#define _MINIX 1
+-EOF
+-
++ if test "x$ac_ct_RANLIB" = x; then
++ RANLIB=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ RANLIB=$ac_ct_RANLIB
++ fi
++else
++ RANLIB="$ac_cv_prog_RANLIB"
+ fi
+
+-
+-
+-
+-echo $ac_n "checking for ${CC-cc} option to accept ANSI C""... $ac_c" 1>&6
+-echo "configure:1325: checking for ${CC-cc} option to accept ANSI C" >&5
+-if eval "test \"`echo '$''{'am_cv_prog_cc_stdc'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5
++$as_echo_n "checking for library containing strerror... " >&6; }
++if ${ac_cv_search_strerror+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- am_cv_prog_cc_stdc=no
+-ac_save_CC="$CC"
+-# Don't try gcc -ansi; that turns off useful extensions and
+-# breaks some systems' header files.
+-# AIX -qlanglvl=ansi
+-# Ultrix and OSF/1 -std1
+-# HP-UX -Aa -D_HPUX_SOURCE
+-# SVR4 -Xc -D__EXTENSIONS__
+-for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+-do
+- CC="$ac_save_CC $ac_arg"
+- cat > conftest.$ac_ext <<EOF
+-#line 1341 "configure"
+-#include "confdefs.h"
+-#include <stdarg.h>
+-#include <stdio.h>
+-#include <sys/types.h>
+-#include <sys/stat.h>
+-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+-struct buf { int x; };
+-FILE * (*rcsopen) (struct buf *, struct stat *, int);
+-static char *e (p, i)
+- char **p;
+- int i;
++ ac_func_search_save_LIBS=$LIBS
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char strerror ();
++int
++main ()
+ {
+- return p[i];
++return strerror ();
++ ;
++ return 0;
+ }
+-static char *f (char * (*g) (char **, int), char **p, ...)
+-{
+- char *s;
+- va_list v;
+- va_start (v,p);
+- s = g (p, va_arg (v,int));
+- va_end (v);
+- return s;
+-}
+-int test (int i, double x);
+-struct s1 {int (*f) (int a);};
+-struct s2 {int (*f) (double a);};
+-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+-int argc;
+-char **argv;
+-
+-int main() {
+-
+-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+-
+-; return 0; }
+-EOF
+-if { (eval echo configure:1378: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
+- am_cv_prog_cc_stdc="$ac_arg"; break
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++_ACEOF
++for ac_lib in '' cposix; do
++ if test -z "$ac_lib"; then
++ ac_res="none required"
++ else
++ ac_res=-l$ac_lib
++ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
++ fi
++ if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_search_strerror=$ac_res
+ fi
+-rm -f conftest*
+-done
+-CC="$ac_save_CC"
+-
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext
++ if ${ac_cv_search_strerror+:} false; then :
++ break
+ fi
++done
++if ${ac_cv_search_strerror+:} false; then :
+
+-if test -z "$am_cv_prog_cc_stdc"; then
+- echo "$ac_t""none needed" 1>&6
+ else
+- echo "$ac_t""$am_cv_prog_cc_stdc" 1>&6
++ ac_cv_search_strerror=no
+ fi
+-case "x$am_cv_prog_cc_stdc" in
+- x|xno) ;;
+- *) CC="$CC $am_cv_prog_cc_stdc" ;;
+-esac
+-
+-
++rm conftest.$ac_ext
++LIBS=$ac_func_search_save_LIBS
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5
++$as_echo "$ac_cv_search_strerror" >&6; }
++ac_res=$ac_cv_search_strerror
++if test "$ac_res" != no; then :
++ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+-echo $ac_n "checking for function prototypes""... $ac_c" 1>&6
+-echo "configure:1404: checking for function prototypes" >&5
+-if test "$am_cv_prog_cc_stdc" != no; then
+- echo "$ac_t""yes" 1>&6
+- cat >> confdefs.h <<\EOF
+-#define PROTOTYPES 1
+-EOF
++fi
+
+- U= ANSI2KNR=
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
++$as_echo_n "checking for ANSI C header files... " >&6; }
++if ${ac_cv_header_stdc+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- echo "$ac_t""no" 1>&6
+- U=_ ANSI2KNR=./ansi2knr
+- # Ensure some checks needed by ansi2knr itself.
+- echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+-echo "configure:1417: checking for ANSI C header files" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 1422 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <stdlib.h>
+ #include <stdarg.h>
+ #include <string.h>
+ #include <float.h>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:1430: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+ else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+ ac_cv_header_stdc=no
+ fi
+-rm -f conftest*
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+ if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+-cat > conftest.$ac_ext <<EOF
+-#line 1447 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <string.h>
+-EOF
++
++_ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "memchr" >/dev/null 2>&1; then
+- :
++ $EGREP "memchr" >/dev/null 2>&1; then :
++
+ else
+- rm -rf conftest*
+ ac_cv_header_stdc=no
+ fi
+ rm -f conftest*
+@@ -1460,16 +4485,15 @@ fi
+
+ if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+-cat > conftest.$ac_ext <<EOF
+-#line 1465 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <stdlib.h>
+-EOF
++
++_ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "free" >/dev/null 2>&1; then
+- :
++ $EGREP "free" >/dev/null 2>&1; then :
++
+ else
+- rm -rf conftest*
+ ac_cv_header_stdc=no
+ fi
+ rm -f conftest*
+@@ -1478,206 +4502,263 @@ fi
+
+ if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+-if test "$cross_compiling" = yes; then
++ if test "$cross_compiling" = yes; then :
+ :
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 1486 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <ctype.h>
+-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
++#include <stdlib.h>
++#if ((' ' & 0x0FF) == 0x020)
++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
++#else
++# define ISLOWER(c) \
++ (('a' <= (c) && (c) <= 'i') \
++ || ('j' <= (c) && (c) <= 'r') \
++ || ('s' <= (c) && (c) <= 'z'))
++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
++#endif
++
+ #define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+-int main () { int i; for (i = 0; i < 256; i++)
+-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+-exit (0); }
+-
+-EOF
+-if { (eval echo configure:1497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+-then
+- :
++int
++main ()
++{
++ int i;
++ for (i = 0; i < 256; i++)
++ if (XOR (islower (i), ISLOWER (i))
++ || toupper (i) != TOUPPER (i))
++ return 2;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_run "$LINENO"; then :
++
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -fr conftest*
+ ac_cv_header_stdc=no
+ fi
+-rm -fr conftest*
++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
++ conftest.$ac_objext conftest.beam conftest.$ac_ext
+ fi
+
+ fi
+ fi
+-
+-echo "$ac_t""$ac_cv_header_stdc" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
++$as_echo "$ac_cv_header_stdc" >&6; }
+ if test $ac_cv_header_stdc = yes; then
+- cat >> confdefs.h <<\EOF
+-#define STDC_HEADERS 1
+-EOF
+
+-fi
++$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+- for ac_hdr in string.h
+-do
+-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+-echo "configure:1524: checking for $ac_hdr" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 1529 "configure"
+-#include "confdefs.h"
+-#include <$ac_hdr>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:1534: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
+-else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
+-fi
+-rm -f conftest*
+ fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_hdr 1
+-EOF
+-
+-else
+- echo "$ac_t""no" 1>&6
++
++# On IRIX 5.3, sys/types and inttypes.h are conflicting.
++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
++ inttypes.h stdint.h unistd.h
++do :
++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
++"
++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
++ cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
+ fi
++
+ done
+
++
++
++ ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
++if test "x$ac_cv_header_minix_config_h" = xyes; then :
++ MINIX=yes
++else
++ MINIX=
++fi
++
++
++ if test "$MINIX" = yes; then
++
++$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
++
++
++$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
++
++
++$as_echo "#define _MINIX 1" >>confdefs.h
++
++ fi
++
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
++$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
++if ${ac_cv_safe_to_define___extensions__+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++# define __EXTENSIONS__ 1
++ $ac_includes_default
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_safe_to_define___extensions__=yes
++else
++ ac_cv_safe_to_define___extensions__=no
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
++$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
++ test $ac_cv_safe_to_define___extensions__ = yes &&
++ $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
+
+-echo $ac_n "checking for working const""... $ac_c" 1>&6
+-echo "configure:1563: checking for working const" >&5
+-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 1568 "configure"
+-#include "confdefs.h"
+-
+-int main() {
+-
+-/* Ultrix mips cc rejects this. */
+-typedef int charset[2]; const charset x;
+-/* SunOS 4.1.1 cc rejects this. */
+-char const *const *ccp;
+-char **p;
+-/* NEC SVR4.0.2 mips cc rejects this. */
+-struct point {int x, y;};
+-static struct point const zero = {0,0};
+-/* AIX XL C 1.02.0.0 rejects this.
+- It does not let you subtract one const X* pointer from another in an arm
+- of an if-expression whose if-part is not a constant expression */
+-const char *g = "string";
+-ccp = &g + (g ? g-g : 0);
+-/* HPUX 7.0 cc rejects these. */
+-++ccp;
+-p = (char**) ccp;
+-ccp = (char const *const *) p;
+-{ /* SCO 3.2v4 cc rejects this. */
+- char *t;
+- char const *s = 0 ? (char *) 0 : (char const *) 0;
+-
+- *t++ = 0;
+-}
+-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+- int x[] = {25, 17};
+- const int *foo = &x[0];
+- ++foo;
+-}
+-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+- typedef const int *iptr;
+- iptr p = 0;
+- ++p;
+-}
+-{ /* AIX XL C 1.02.0.0 rejects this saying
+- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+- struct s { int j; const int *ap[3]; };
+- struct s *b; b->j = 5;
+-}
+-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+- const int foo = 10;
+-}
+-
+-; return 0; }
+-EOF
+-if { (eval echo configure:1617: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
++ $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
++
++ $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
++
++ $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
++
++ $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
++$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
++if ${ac_cv_c_const+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++#ifndef __cplusplus
++ /* Ultrix mips cc rejects this sort of thing. */
++ typedef int charset[2];
++ const charset cs = { 0, 0 };
++ /* SunOS 4.1.1 cc rejects this. */
++ char const *const *pcpcc;
++ char **ppc;
++ /* NEC SVR4.0.2 mips cc rejects this. */
++ struct point {int x, y;};
++ static struct point const zero = {0,0};
++ /* AIX XL C 1.02.0.0 rejects this.
++ It does not let you subtract one const X* pointer from another in
++ an arm of an if-expression whose if-part is not a constant
++ expression */
++ const char *g = "string";
++ pcpcc = &g + (g ? g-g : 0);
++ /* HPUX 7.0 cc rejects these. */
++ ++pcpcc;
++ ppc = (char**) pcpcc;
++ pcpcc = (char const *const *) ppc;
++ { /* SCO 3.2v4 cc rejects this sort of thing. */
++ char tx;
++ char *t = &tx;
++ char const *s = 0 ? (char *) 0 : (char const *) 0;
++
++ *t++ = 0;
++ if (s) return 0;
++ }
++ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
++ int x[] = {25, 17};
++ const int *foo = &x[0];
++ ++foo;
++ }
++ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
++ typedef const int *iptr;
++ iptr p = 0;
++ ++p;
++ }
++ { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
++ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
++ struct s { int j; const int *ap[3]; } bx;
++ struct s *b = &bx; b->j = 5;
++ }
++ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
++ const int foo = 10;
++ if (!foo) return 0;
++ }
++ return !cs[0] && !zero.x;
++#endif
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_const=yes
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+ ac_cv_c_const=no
+ fi
+-rm -f conftest*
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+-
+-echo "$ac_t""$ac_cv_c_const" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
++$as_echo "$ac_cv_c_const" >&6; }
+ if test $ac_cv_c_const = no; then
+- cat >> confdefs.h <<\EOF
+-#define const
+-EOF
++
++$as_echo "#define const /**/" >>confdefs.h
+
+ fi
+
+-echo $ac_n "checking for inline""... $ac_c" 1>&6
+-echo "configure:1638: checking for inline" >&5
+-if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
++$as_echo_n "checking for inline... " >&6; }
++if ${ac_cv_c_inline+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+ ac_cv_c_inline=no
+ for ac_kw in inline __inline__ __inline; do
+- cat > conftest.$ac_ext <<EOF
+-#line 1645 "configure"
+-#include "confdefs.h"
+-
+-int main() {
+-} $ac_kw foo() {
+-; return 0; }
+-EOF
+-if { (eval echo configure:1652: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
+- ac_cv_c_inline=$ac_kw; break
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#ifndef __cplusplus
++typedef int foo_t;
++static $ac_kw foo_t static_foo () {return 0; }
++$ac_kw foo_t foo () {return 0; }
++#endif
++
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_c_inline=$ac_kw
+ fi
+-rm -f conftest*
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ test "$ac_cv_c_inline" != no && break
+ done
+
+ fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
++$as_echo "$ac_cv_c_inline" >&6; }
+
+-echo "$ac_t""$ac_cv_c_inline" 1>&6
+-case "$ac_cv_c_inline" in
++case $ac_cv_c_inline in
+ inline | yes) ;;
+- no) cat >> confdefs.h <<\EOF
+-#define inline
+-EOF
+- ;;
+- *) cat >> confdefs.h <<EOF
+-#define inline $ac_cv_c_inline
+-EOF
+- ;;
++ *)
++ case $ac_cv_c_inline in
++ no) ac_val=;;
++ *) ac_val=$ac_cv_c_inline;;
++ esac
++ cat >>confdefs.h <<_ACEOF
++#ifndef __cplusplus
++#define inline $ac_val
++#endif
++_ACEOF
++ ;;
+ esac
+
+
+ if test `hostname` = tirka.ohse.de -a "$cross_compiling" = no ; then
+ test $prefix = NONE && prefix=/usr
+- if test -z "$CFLAGS" ; then
+- case "$CC" in
++ if test -z "$CFLAGS" ; then
++ case "$CC" in
+ *gcc*)
+ CFLAGS="-Wall -Wstrict-prototypes -Wmissing-prototypes"
+ # -Wnested_externs entfernt wegen dcgettext()
+@@ -1691,195 +4772,185 @@ if test `hostname` = tirka.ohse.de -a "$
+ fi
+ case "$CFLAGS" in
+ *-Wstrict-prototypes*)
+- cat >> confdefs.h <<\EOF
+-#define STRICT_PROTOTYPES 1
+-EOF
++ $as_echo "#define STRICT_PROTOTYPES 1" >>confdefs.h
+
+ ;;
+ esac
+
+-echo $ac_n "checking for syslog in -lsocket""... $ac_c" 1>&6
+-echo "configure:1703: checking for syslog in -lsocket" >&5
+-ac_lib_var=`echo socket'_'syslog | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for syslog in -lsocket" >&5
++$as_echo_n "checking for syslog in -lsocket... " >&6; }
++if ${ac_cv_lib_socket_syslog+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- ac_save_LIBS="$LIBS"
++ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lsocket $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 1711 "configure"
+-#include "confdefs.h"
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char syslog();
+-
+-int main() {
+-syslog()
+-; return 0; }
+-EOF
+-if { (eval echo configure:1722: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_lib 1
+-EOF
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char syslog ();
++int
++main ()
++{
++return syslog ();
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_lib_socket_syslog=yes
++else
++ ac_cv_lib_socket_syslog=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_syslog" >&5
++$as_echo "$ac_cv_lib_socket_syslog" >&6; }
++if test "x$ac_cv_lib_socket_syslog" = xyes; then :
++ cat >>confdefs.h <<_ACEOF
++#define HAVE_LIBSOCKET 1
++_ACEOF
+
+ LIBS="-lsocket $LIBS"
+
+-else
+- echo "$ac_t""no" 1>&6
+ fi
+
+-echo $ac_n "checking for syslog in -lbe""... $ac_c" 1>&6
+-echo "configure:1750: checking for syslog in -lbe" >&5
+-ac_lib_var=`echo be'_'syslog | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for syslog in -lbe" >&5
++$as_echo_n "checking for syslog in -lbe... " >&6; }
++if ${ac_cv_lib_be_syslog+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- ac_save_LIBS="$LIBS"
++ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lbe $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 1758 "configure"
+-#include "confdefs.h"
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char syslog();
+-
+-int main() {
+-syslog()
+-; return 0; }
+-EOF
+-if { (eval echo configure:1769: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_lib=HAVE_LIB`echo be | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_lib 1
+-EOF
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char syslog ();
++int
++main ()
++{
++return syslog ();
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_lib_be_syslog=yes
++else
++ ac_cv_lib_be_syslog=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_be_syslog" >&5
++$as_echo "$ac_cv_lib_be_syslog" >&6; }
++if test "x$ac_cv_lib_be_syslog" = xyes; then :
++ cat >>confdefs.h <<_ACEOF
++#define HAVE_LIBBE 1
++_ACEOF
+
+ LIBS="-lbe $LIBS"
+
+-else
+- echo "$ac_t""no" 1>&6
+ fi
+
+-echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
+-echo "configure:1797: checking for gethostbyname in -lnsl" >&5
+-ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5
++$as_echo_n "checking for gethostbyname in -lnsl... " >&6; }
++if ${ac_cv_lib_nsl_gethostbyname+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- ac_save_LIBS="$LIBS"
++ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lnsl $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 1805 "configure"
+-#include "confdefs.h"
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char gethostbyname();
+-
+-int main() {
+-gethostbyname()
+-; return 0; }
+-EOF
+-if { (eval echo configure:1816: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_lib 1
+-EOF
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char gethostbyname ();
++int
++main ()
++{
++return gethostbyname ();
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_lib_nsl_gethostbyname=yes
++else
++ ac_cv_lib_nsl_gethostbyname=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5
++$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; }
++if test "x$ac_cv_lib_nsl_gethostbyname" = xyes; then :
++ cat >>confdefs.h <<_ACEOF
++#define HAVE_LIBNSL 1
++_ACEOF
+
+ LIBS="-lnsl $LIBS"
+
+-else
+- echo "$ac_t""no" 1>&6
+ fi
+
+
+-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+-echo "configure:1845: checking for ANSI C header files" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
++$as_echo_n "checking for ANSI C header files... " >&6; }
++if ${ac_cv_header_stdc+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 1850 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <stdlib.h>
+ #include <stdarg.h>
+ #include <string.h>
+ #include <float.h>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:1858: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+ else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+ ac_cv_header_stdc=no
+ fi
+-rm -f conftest*
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+ if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+-cat > conftest.$ac_ext <<EOF
+-#line 1875 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <string.h>
+-EOF
++
++_ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "memchr" >/dev/null 2>&1; then
+- :
++ $EGREP "memchr" >/dev/null 2>&1; then :
++
+ else
+- rm -rf conftest*
+ ac_cv_header_stdc=no
+ fi
+ rm -f conftest*
+@@ -1888,16 +4959,15 @@ fi
+
+ if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+-cat > conftest.$ac_ext <<EOF
+-#line 1893 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <stdlib.h>
+-EOF
++
++_ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "free" >/dev/null 2>&1; then
+- :
++ $EGREP "free" >/dev/null 2>&1; then :
++
+ else
+- rm -rf conftest*
+ ac_cv_header_stdc=no
+ fi
+ rm -f conftest*
+@@ -1906,354 +4976,163 @@ fi
+
+ if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+-if test "$cross_compiling" = yes; then
++ if test "$cross_compiling" = yes; then :
+ :
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 1914 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <ctype.h>
+-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
++#include <stdlib.h>
++#if ((' ' & 0x0FF) == 0x020)
++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
++#else
++# define ISLOWER(c) \
++ (('a' <= (c) && (c) <= 'i') \
++ || ('j' <= (c) && (c) <= 'r') \
++ || ('s' <= (c) && (c) <= 'z'))
++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
++#endif
++
+ #define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+-int main () { int i; for (i = 0; i < 256; i++)
+-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+-exit (0); }
+-
+-EOF
+-if { (eval echo configure:1925: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+-then
+- :
++int
++main ()
++{
++ int i;
++ for (i = 0; i < 256; i++)
++ if (XOR (islower (i), ISLOWER (i))
++ || toupper (i) != TOUPPER (i))
++ return 2;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_run "$LINENO"; then :
++
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -fr conftest*
+ ac_cv_header_stdc=no
+ fi
+-rm -fr conftest*
++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
++ conftest.$ac_objext conftest.beam conftest.$ac_ext
+ fi
+
+ fi
+ fi
+-
+-echo "$ac_t""$ac_cv_header_stdc" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
++$as_echo "$ac_cv_header_stdc" >&6; }
+ if test $ac_cv_header_stdc = yes; then
+- cat >> confdefs.h <<\EOF
+-#define STDC_HEADERS 1
+-EOF
+
+-fi
++$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+-for ac_hdr in fcntl.h limits.h sys/ioctl.h sys/time.h unistd.h sys/times.h
+-do
+-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+-echo "configure:1952: checking for $ac_hdr" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 1957 "configure"
+-#include "confdefs.h"
+-#include <$ac_hdr>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:1962: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
+-else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
+-fi
+-rm -f conftest*
+ fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_hdr 1
+-EOF
+-
+-else
+- echo "$ac_t""no" 1>&6
++
++for ac_header in fcntl.h limits.h sys/ioctl.h sys/time.h unistd.h sys/times.h
++do :
++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
++ cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
+ fi
++
+ done
+
+
+-for ac_hdr in termios.h sys/termios.h termio.h sys/termio.h sgtty.h
+-do
+-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+-echo "configure:1993: checking for $ac_hdr" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 1998 "configure"
+-#include "confdefs.h"
+-#include <$ac_hdr>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:2003: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
+-else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
+-fi
+-rm -f conftest*
+-fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_hdr 1
+-EOF
+-
+-else
+- echo "$ac_t""no" 1>&6
++for ac_header in termios.h sys/termios.h termio.h sys/termio.h sgtty.h
++do :
++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
++ cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
+ fi
++
+ done
+
+-for ac_hdr in termios.h sys/termios.h termio.h sys/termio.h sgtty.h
+-do
+-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+-echo "configure:2033: checking for $ac_hdr" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2038 "configure"
+-#include "confdefs.h"
+-#include <$ac_hdr>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:2043: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
+-else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
+-fi
+-rm -f conftest*
+-fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_hdr 1
+-EOF
+-
+-else
+- echo "$ac_t""no" 1>&6
++for ac_header in termios.h sys/termios.h termio.h sys/termio.h sgtty.h
++do :
++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
++ cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
+ fi
++
+ done
+
+-for ac_hdr in sys/mman.h utime.h syslog.h sys/syslog.h sys/param.h
+-do
+-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+-echo "configure:2073: checking for $ac_hdr" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2078 "configure"
+-#include "confdefs.h"
+-#include <$ac_hdr>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:2083: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
+-else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
+-fi
+-rm -f conftest*
+-fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_hdr 1
+-EOF
+-
+-else
+- echo "$ac_t""no" 1>&6
++for ac_header in sys/mman.h utime.h syslog.h sys/syslog.h sys/param.h
++do :
++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
++ cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
+ fi
++
+ done
+
+-for ac_hdr in sys/select.h strings.h arpa/inet.h
+-do
+-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+-echo "configure:2113: checking for $ac_hdr" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2118 "configure"
+-#include "confdefs.h"
+-#include <$ac_hdr>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:2123: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
+-else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
+-fi
+-rm -f conftest*
+-fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_hdr 1
+-EOF
+-
+-else
+- echo "$ac_t""no" 1>&6
++for ac_header in sys/select.h strings.h arpa/inet.h
++do :
++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
++ cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
+ fi
++
+ done
+
+
+-echo $ac_n "checking for size_t""... $ac_c" 1>&6
+-echo "configure:2151: checking for size_t" >&5
+-if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2156 "configure"
+-#include "confdefs.h"
+-#include <sys/types.h>
+-#if STDC_HEADERS
+-#include <stdlib.h>
+-#include <stddef.h>
+-#endif
+-EOF
+-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+- rm -rf conftest*
+- ac_cv_type_size_t=yes
++ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
++if test "x$ac_cv_type_size_t" = xyes; then :
++
+ else
+- rm -rf conftest*
+- ac_cv_type_size_t=no
+-fi
+-rm -f conftest*
+
+-fi
+-echo "$ac_t""$ac_cv_type_size_t" 1>&6
+-if test $ac_cv_type_size_t = no; then
+- cat >> confdefs.h <<\EOF
+-#define size_t unsigned
+-EOF
++cat >>confdefs.h <<_ACEOF
++#define size_t unsigned int
++_ACEOF
+
+ fi
+
+-echo $ac_n "checking for mode_t""... $ac_c" 1>&6
+-echo "configure:2184: checking for mode_t" >&5
+-if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2189 "configure"
+-#include "confdefs.h"
+-#include <sys/types.h>
+-#if STDC_HEADERS
+-#include <stdlib.h>
+-#include <stddef.h>
+-#endif
+-EOF
+-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "mode_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+- rm -rf conftest*
+- ac_cv_type_mode_t=yes
++ac_fn_c_check_type "$LINENO" "mode_t" "ac_cv_type_mode_t" "$ac_includes_default"
++if test "x$ac_cv_type_mode_t" = xyes; then :
++
+ else
+- rm -rf conftest*
+- ac_cv_type_mode_t=no
+-fi
+-rm -f conftest*
+
+-fi
+-echo "$ac_t""$ac_cv_type_mode_t" 1>&6
+-if test $ac_cv_type_mode_t = no; then
+- cat >> confdefs.h <<\EOF
++cat >>confdefs.h <<_ACEOF
+ #define mode_t int
+-EOF
++_ACEOF
+
+ fi
+
+-echo $ac_n "checking for off_t""... $ac_c" 1>&6
+-echo "configure:2217: checking for off_t" >&5
+-if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2222 "configure"
+-#include "confdefs.h"
+-#include <sys/types.h>
+-#if STDC_HEADERS
+-#include <stdlib.h>
+-#include <stddef.h>
+-#endif
+-EOF
+-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+- rm -rf conftest*
+- ac_cv_type_off_t=yes
++ac_fn_c_check_type "$LINENO" "off_t" "ac_cv_type_off_t" "$ac_includes_default"
++if test "x$ac_cv_type_off_t" = xyes; then :
++
+ else
+- rm -rf conftest*
+- ac_cv_type_off_t=no
+-fi
+-rm -f conftest*
+
+-fi
+-echo "$ac_t""$ac_cv_type_off_t" 1>&6
+-if test $ac_cv_type_off_t = no; then
+- cat >> confdefs.h <<\EOF
+-#define off_t long
+-EOF
++cat >>confdefs.h <<_ACEOF
++#define off_t long int
++_ACEOF
+
+ fi
+
+
+-echo $ac_n "checking for speed_t""... $ac_c" 1>&6
+-echo "configure:2251: checking for speed_t" >&5
+-if eval "test \"`echo '$''{'ac_cv_type_speed_t'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for speed_t" >&5
++$as_echo_n "checking for speed_t... " >&6; }
++if ${ac_cv_type_speed_t+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 2256 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <sys/types.h>
+ #if STDC_HEADERS
+ #include <stdlib.h>
+@@ -2281,394 +5160,261 @@ else
+ #endif
+ #endif
+
+-EOF
++_ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "speed_t" >/dev/null 2>&1; then
+- rm -rf conftest*
++ $EGREP "speed_t" >/dev/null 2>&1; then :
+ ac_cv_type_speed_t=yes
+ else
+- rm -rf conftest*
+ ac_cv_type_speed_t=no
+ fi
+ rm -f conftest*
+
+ fi
+-echo "$ac_t""$ac_cv_type_speed_t" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_speed_t" >&5
++$as_echo "$ac_cv_type_speed_t" >&6; }
+ if test $ac_cv_type_speed_t = no; then
+- cat >> confdefs.h <<\EOF
+-#define speed_t long
+-EOF
++ $as_echo "#define speed_t long" >>confdefs.h
+
+ fi
+
+-echo $ac_n "checking for st_rdev in struct stat""... $ac_c" 1>&6
+-echo "configure:2306: checking for st_rdev in struct stat" >&5
+-if eval "test \"`echo '$''{'ac_cv_struct_st_rdev'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2311 "configure"
+-#include "confdefs.h"
+-#include <sys/types.h>
+-#include <sys/stat.h>
+-int main() {
+-struct stat s; s.st_rdev;
+-; return 0; }
+-EOF
+-if { (eval echo configure:2319: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
+- ac_cv_struct_st_rdev=yes
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- ac_cv_struct_st_rdev=no
+-fi
+-rm -f conftest*
+-fi
++ac_fn_c_check_member "$LINENO" "struct stat" "st_rdev" "ac_cv_member_struct_stat_st_rdev" "$ac_includes_default"
++if test "x$ac_cv_member_struct_stat_st_rdev" = xyes; then :
++
++cat >>confdefs.h <<_ACEOF
++#define HAVE_STRUCT_STAT_ST_RDEV 1
++_ACEOF
++
+
+-echo "$ac_t""$ac_cv_struct_st_rdev" 1>&6
+-if test $ac_cv_struct_st_rdev = yes; then
+- cat >> confdefs.h <<\EOF
+-#define HAVE_ST_RDEV 1
+-EOF
++$as_echo "#define HAVE_ST_RDEV 1" >>confdefs.h
+
+ fi
+
+-echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
+-echo "configure:2340: checking whether time.h and sys/time.h may both be included" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2345 "configure"
+-#include "confdefs.h"
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5
++$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; }
++if ${ac_cv_header_time+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <sys/types.h>
+ #include <sys/time.h>
+ #include <time.h>
+-int main() {
+-struct tm *tp;
+-; return 0; }
+-EOF
+-if { (eval echo configure:2354: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
++
++int
++main ()
++{
++if ((struct tm *) 0)
++return 0;
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_time=yes
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+ ac_cv_header_time=no
+ fi
+-rm -f conftest*
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+-
+-echo "$ac_t""$ac_cv_header_time" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5
++$as_echo "$ac_cv_header_time" >&6; }
+ if test $ac_cv_header_time = yes; then
+- cat >> confdefs.h <<\EOF
+-#define TIME_WITH_SYS_TIME 1
+-EOF
++
++$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h
+
+ fi
+
+-echo $ac_n "checking whether sys/time.h and sys/select.h may both be included""... $ac_c" 1>&6
+-echo "configure:2375: checking whether sys/time.h and sys/select.h may both be included" >&5
+-if eval "test \"`echo '$''{'lrzsz_cv_header_sys_select'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether sys/time.h and sys/select.h may both be included" >&5
++$as_echo_n "checking whether sys/time.h and sys/select.h may both be included... " >&6; }
++if ${lrzsz_cv_header_sys_select+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 2380 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <sys/types.h>
+ #include <sys/time.h>
+ #include <sys/select.h>
+-int main() {
++int
++main ()
++{
+ struct tm *tp;
+-; return 0; }
+-EOF
+-if { (eval echo configure:2389: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
+ lrzsz_cv_header_sys_select=yes
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+ lrzsz_cv_header_sys_select=no
+ fi
+-rm -f conftest*
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+-
+-echo "$ac_t""$lrzsz_cv_header_sys_select" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lrzsz_cv_header_sys_select" >&5
++$as_echo "$lrzsz_cv_header_sys_select" >&6; }
+ if test $lrzsz_cv_header_sys_select = no; then
+- cat >> confdefs.h <<\EOF
+-#define SYS_TIME_WITHOUT_SYS_SELECT 1
+-EOF
++ $as_echo "#define SYS_TIME_WITHOUT_SYS_SELECT 1" >>confdefs.h
+
+ fi
+
+-echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
+-echo "configure:2410: checking whether struct tm is in sys/time.h or time.h" >&5
+-if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5
++$as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; }
++if ${ac_cv_struct_tm+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 2415 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <sys/types.h>
+ #include <time.h>
+-int main() {
+-struct tm *tp; tp->tm_sec;
+-; return 0; }
+-EOF
+-if { (eval echo configure:2423: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
++
++int
++main ()
++{
++struct tm tm;
++ int *p = &tm.tm_sec;
++ return !p;
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_struct_tm=time.h
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+ ac_cv_struct_tm=sys/time.h
+ fi
+-rm -f conftest*
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+-
+-echo "$ac_t""$ac_cv_struct_tm" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5
++$as_echo "$ac_cv_struct_tm" >&6; }
+ if test $ac_cv_struct_tm = sys/time.h; then
+- cat >> confdefs.h <<\EOF
+-#define TM_IN_SYS_TIME 1
+-EOF
++
++$as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h
+
+ fi
+
+
+-echo $ac_n "checking for errno declaration""... $ac_c" 1>&6
+-echo "configure:2445: checking for errno declaration" >&5
+-if eval "test \"`echo '$''{'lrzsz_cv_decl_errno'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for errno declaration" >&5
++$as_echo_n "checking for errno declaration... " >&6; }
++if ${lrzsz_cv_decl_errno+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 2450 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <errno.h>
+-int main() {
++int
++main ()
++{
+ int i = errno; errno = 1;
+-; return 0; }
+-EOF
+-if { (eval echo configure:2457: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
+ lrzsz_cv_decl_errno=yes
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+ lrzsz_cv_decl_errno=no
+ fi
+-rm -f conftest*
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+
+-echo "$ac_t""$lrzsz_cv_decl_errno" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lrzsz_cv_decl_errno" >&5
++$as_echo "$lrzsz_cv_decl_errno" >&6; }
+ if test $lrzsz_cv_decl_errno = yes; then
+- cat >> confdefs.h <<\EOF
+-#define HAVE_ERRNO_DECLARATION 1
+-EOF
++ $as_echo "#define HAVE_ERRNO_DECLARATION 1" >>confdefs.h
+
+ fi
+
+
+ if test $cross_compiling = no ; then
+- echo $ac_n "checking whether setvbuf arguments are reversed""... $ac_c" 1>&6
+-echo "configure:2480: checking whether setvbuf arguments are reversed" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_setvbuf_reversed'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- if test "$cross_compiling" = yes; then
+- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2488 "configure"
+-#include "confdefs.h"
+-#include <stdio.h>
+-/* If setvbuf has the reversed format, exit 0. */
+-main () {
+- /* This call has the arguments reversed.
+- A reversed system may check and see that the address of main
+- is not _IOLBF, _IONBF, or _IOFBF, and return nonzero. */
+- if (setvbuf(stdout, _IOLBF, (char *) main, BUFSIZ) != 0)
+- exit(1);
+- putc('\r', stdout);
+- exit(0); /* Non-reversed systems segv here. */
+-}
+-EOF
+-if { (eval echo configure:2502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+-then
+- ac_cv_func_setvbuf_reversed=yes
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -fr conftest*
++ if ${ac_cv_func_setvbuf_reversed+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
+ ac_cv_func_setvbuf_reversed=no
+ fi
+-rm -fr conftest*
+-fi
+
+-rm -f core core.* *.core
+-fi
+-
+-echo "$ac_t""$ac_cv_func_setvbuf_reversed" 1>&6
+-if test $ac_cv_func_setvbuf_reversed = yes; then
+- cat >> confdefs.h <<\EOF
+-#define SETVBUF_REVERSED 1
+-EOF
+-
+-fi
+
+ fi
+-echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
+-echo "configure:2527: checking return type of signal handlers" >&5
+-if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5
++$as_echo_n "checking return type of signal handlers... " >&6; }
++if ${ac_cv_type_signal+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 2532 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <sys/types.h>
+ #include <signal.h>
+-#ifdef signal
+-#undef signal
+-#endif
+-#ifdef __cplusplus
+-extern "C" void (*signal (int, void (*)(int)))(int);
+-#else
+-void (*signal ()) ();
+-#endif
+
+-int main() {
+-int i;
+-; return 0; }
+-EOF
+-if { (eval echo configure:2549: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
+- ac_cv_type_signal=void
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
++int
++main ()
++{
++return *(signal (0, 0)) (0) == 1;
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_type_signal=int
++else
++ ac_cv_type_signal=void
+ fi
+-rm -f conftest*
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5
++$as_echo "$ac_cv_type_signal" >&6; }
+
+-echo "$ac_t""$ac_cv_type_signal" 1>&6
+-cat >> confdefs.h <<EOF
++cat >>confdefs.h <<_ACEOF
+ #define RETSIGTYPE $ac_cv_type_signal
+-EOF
++_ACEOF
+
+
+-for ac_hdr in unistd.h
+-do
+-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+-echo "configure:2571: checking for $ac_hdr" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2576 "configure"
+-#include "confdefs.h"
+-#include <$ac_hdr>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:2581: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
+-else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
+-fi
+-rm -f conftest*
+-fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_hdr 1
+-EOF
+-
+-else
+- echo "$ac_t""no" 1>&6
++
++
++
++ for ac_header in $ac_header_list
++do :
++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
++"
++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
++ cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
+ fi
++
+ done
+
+-for ac_func in getpagesize
+-do
+-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+-echo "configure:2610: checking for $ac_func" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2615 "configure"
+-#include "confdefs.h"
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char $ac_func(); below. */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char $ac_func();
+
+-int main() {
+
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+-choke me
+-#else
+-$ac_func();
+-#endif
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:2638: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=no"
+-fi
+-rm -f conftest*
+-fi
+
+-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_func 1
+-EOF
+-
+-else
+- echo "$ac_t""no" 1>&6
++
++
++
++for ac_func in getpagesize
++do :
++ ac_fn_c_check_func "$LINENO" "getpagesize" "ac_cv_func_getpagesize"
++if test "x$ac_cv_func_getpagesize" = xyes; then :
++ cat >>confdefs.h <<_ACEOF
++#define HAVE_GETPAGESIZE 1
++_ACEOF
++
+ fi
+ done
+
+-echo $ac_n "checking for working mmap""... $ac_c" 1>&6
+-echo "configure:2663: checking for working mmap" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working mmap" >&5
++$as_echo_n "checking for working mmap... " >&6; }
++if ${ac_cv_func_mmap_fixed_mapped+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- if test "$cross_compiling" = yes; then
++ if test "$cross_compiling" = yes; then :
+ ac_cv_func_mmap_fixed_mapped=no
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 2671 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$ac_includes_default
++/* malloc might have been renamed as rpl_malloc. */
++#undef malloc
+
+ /* Thanks to Mike Haertel and Jim Avera for this test.
+ Here is a matrix of mmap possibilities:
+@@ -2682,30 +5428,25 @@ else
+ back from the file, nor mmap's back from the file at a different
+ address. (There have been systems where private was not correctly
+ implemented like the infamous i386 svr4.0, and systems where the
+- VM page cache was not coherent with the filesystem buffer cache
++ VM page cache was not coherent with the file system buffer cache
+ like early versions of FreeBSD and possibly contemporary NetBSD.)
+ For shared mappings, we should conversely verify that changes get
+- propogated back to all the places they're supposed to be.
++ propagated back to all the places they're supposed to be.
+
+ Grep wants private fixed already mapped.
+ The main things grep needs to know about mmap are:
+ * does it exist and is it safe to write into the mmap'd area
+ * how to use it (BSD variants) */
+-#include <sys/types.h>
++
+ #include <fcntl.h>
+ #include <sys/mman.h>
+
++#if !defined STDC_HEADERS && !defined HAVE_STDLIB_H
++char *malloc ();
++#endif
++
+ /* This mess was copied from the GNU getpagesize.h. */
+ #ifndef HAVE_GETPAGESIZE
+-# ifdef HAVE_UNISTD_H
+-# include <unistd.h>
+-# endif
+-
+-/* Assume that all systems that can run configure have sys/param.h. */
+-# ifndef HAVE_SYS_PARAM_H
+-# define HAVE_SYS_PARAM_H 1
+-# endif
+-
+ # ifdef _SC_PAGESIZE
+ # define getpagesize() sysconf(_SC_PAGESIZE)
+ # else /* no _SC_PAGESIZE */
+@@ -2736,736 +5477,504 @@ else
+
+ #endif /* no HAVE_GETPAGESIZE */
+
+-#ifdef __cplusplus
+-extern "C" { void *malloc(unsigned); }
+-#else
+-char *malloc();
+-#endif
+-
+ int
+-main()
++main ()
+ {
+- char *data, *data2, *data3;
+- int i, pagesize;
+- int fd;
+-
+- pagesize = getpagesize();
+-
+- /*
+- * First, make a file with some known garbage in it.
+- */
+- data = malloc(pagesize);
+- if (!data)
+- exit(1);
+- for (i = 0; i < pagesize; ++i)
+- *(data + i) = rand();
+- umask(0);
+- fd = creat("conftestmmap", 0600);
+- if (fd < 0)
+- exit(1);
+- if (write(fd, data, pagesize) != pagesize)
+- exit(1);
+- close(fd);
+-
+- /*
+- * Next, try to mmap the file at a fixed address which
+- * already has something else allocated at it. If we can,
+- * also make sure that we see the same garbage.
+- */
+- fd = open("conftestmmap", O_RDWR);
+- if (fd < 0)
+- exit(1);
+- data2 = malloc(2 * pagesize);
+- if (!data2)
+- exit(1);
+- data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
+- if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
+- MAP_PRIVATE | MAP_FIXED, fd, 0L))
+- exit(1);
+- for (i = 0; i < pagesize; ++i)
+- if (*(data + i) != *(data2 + i))
+- exit(1);
+-
+- /*
+- * Finally, make sure that changes to the mapped area
+- * do not percolate back to the file as seen by read().
+- * (This is a bug on some variants of i386 svr4.0.)
+- */
+- for (i = 0; i < pagesize; ++i)
+- *(data2 + i) = *(data2 + i) + 1;
+- data3 = malloc(pagesize);
+- if (!data3)
+- exit(1);
+- if (read(fd, data3, pagesize) != pagesize)
+- exit(1);
+- for (i = 0; i < pagesize; ++i)
+- if (*(data + i) != *(data3 + i))
+- exit(1);
+- close(fd);
+- unlink("conftestmmap");
+- exit(0);
+-}
+-
+-EOF
+-if { (eval echo configure:2811: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+-then
++ char *data, *data2, *data3;
++ const char *cdata2;
++ int i, pagesize;
++ int fd, fd2;
++
++ pagesize = getpagesize ();
++
++ /* First, make a file with some known garbage in it. */
++ data = (char *) malloc (pagesize);
++ if (!data)
++ return 1;
++ for (i = 0; i < pagesize; ++i)
++ *(data + i) = rand ();
++ umask (0);
++ fd = creat ("conftest.mmap", 0600);
++ if (fd < 0)
++ return 2;
++ if (write (fd, data, pagesize) != pagesize)
++ return 3;
++ close (fd);
++
++ /* Next, check that the tail of a page is zero-filled. File must have
++ non-zero length, otherwise we risk SIGBUS for entire page. */
++ fd2 = open ("conftest.txt", O_RDWR | O_CREAT | O_TRUNC, 0600);
++ if (fd2 < 0)
++ return 4;
++ cdata2 = "";
++ if (write (fd2, cdata2, 1) != 1)
++ return 5;
++ data2 = (char *) mmap (0, pagesize, PROT_READ | PROT_WRITE, MAP_SHARED, fd2, 0L);
++ if (data2 == MAP_FAILED)
++ return 6;
++ for (i = 0; i < pagesize; ++i)
++ if (*(data2 + i))
++ return 7;
++ close (fd2);
++ if (munmap (data2, pagesize))
++ return 8;
++
++ /* Next, try to mmap the file at a fixed address which already has
++ something else allocated at it. If we can, also make sure that
++ we see the same garbage. */
++ fd = open ("conftest.mmap", O_RDWR);
++ if (fd < 0)
++ return 9;
++ if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE,
++ MAP_PRIVATE | MAP_FIXED, fd, 0L))
++ return 10;
++ for (i = 0; i < pagesize; ++i)
++ if (*(data + i) != *(data2 + i))
++ return 11;
++
++ /* Finally, make sure that changes to the mapped area do not
++ percolate back to the file as seen by read(). (This is a bug on
++ some variants of i386 svr4.0.) */
++ for (i = 0; i < pagesize; ++i)
++ *(data2 + i) = *(data2 + i) + 1;
++ data3 = (char *) malloc (pagesize);
++ if (!data3)
++ return 12;
++ if (read (fd, data3, pagesize) != pagesize)
++ return 13;
++ for (i = 0; i < pagesize; ++i)
++ if (*(data + i) != *(data3 + i))
++ return 14;
++ close (fd);
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_func_mmap_fixed_mapped=yes
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -fr conftest*
+ ac_cv_func_mmap_fixed_mapped=no
+ fi
+-rm -fr conftest*
++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
++ conftest.$ac_objext conftest.beam conftest.$ac_ext
+ fi
+
+ fi
+-
+-echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mmap_fixed_mapped" >&5
++$as_echo "$ac_cv_func_mmap_fixed_mapped" >&6; }
+ if test $ac_cv_func_mmap_fixed_mapped = yes; then
+- cat >> confdefs.h <<\EOF
+-#define HAVE_MMAP 1
+-EOF
++
++$as_echo "#define HAVE_MMAP 1" >>confdefs.h
+
+ fi
++rm -f conftest.mmap conftest.txt
+
+ # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+ # for constant arguments. Useless!
+-echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
+-echo "configure:2836: checking for working alloca.h" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2841 "configure"
+-#include "confdefs.h"
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
++$as_echo_n "checking for working alloca.h... " >&6; }
++if ${ac_cv_working_alloca_h+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <alloca.h>
+-int main() {
+-char *p = alloca(2 * sizeof(int));
+-; return 0; }
+-EOF
+-if { (eval echo configure:2848: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- ac_cv_header_alloca_h=yes
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- ac_cv_header_alloca_h=no
++int
++main ()
++{
++char *p = (char *) alloca (2 * sizeof (int));
++ if (p) return 0;
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_working_alloca_h=yes
++else
++ ac_cv_working_alloca_h=no
+ fi
+-rm -f conftest*
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_working_alloca_h" >&5
++$as_echo "$ac_cv_working_alloca_h" >&6; }
++if test $ac_cv_working_alloca_h = yes; then
+
+-echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
+-if test $ac_cv_header_alloca_h = yes; then
+- cat >> confdefs.h <<\EOF
+-#define HAVE_ALLOCA_H 1
+-EOF
++$as_echo "#define HAVE_ALLOCA_H 1" >>confdefs.h
+
+ fi
+
+-echo $ac_n "checking for alloca""... $ac_c" 1>&6
+-echo "configure:2869: checking for alloca" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2874 "configure"
+-#include "confdefs.h"
+-
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
++$as_echo_n "checking for alloca... " >&6; }
++if ${ac_cv_func_alloca_works+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #ifdef __GNUC__
+ # define alloca __builtin_alloca
+ #else
+-# if HAVE_ALLOCA_H
+-# include <alloca.h>
++# ifdef _MSC_VER
++# include <malloc.h>
++# define alloca _alloca
+ # else
+-# ifdef _AIX
+- #pragma alloca
++# ifdef HAVE_ALLOCA_H
++# include <alloca.h>
+ # else
+-# ifndef alloca /* predefined by HP cc +Olibcalls */
+-char *alloca ();
++# ifdef _AIX
++ #pragma alloca
++# else
++# ifndef alloca /* predefined by HP cc +Olibcalls */
++void *alloca (size_t);
++# endif
+ # endif
+ # endif
+ # endif
+ #endif
+
+-int main() {
+-char *p = (char *) alloca(1);
+-; return 0; }
+-EOF
+-if { (eval echo configure:2897: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
++int
++main ()
++{
++char *p = (char *) alloca (1);
++ if (p) return 0;
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_func_alloca_works=yes
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+ ac_cv_func_alloca_works=no
+ fi
+-rm -f conftest*
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_alloca_works" >&5
++$as_echo "$ac_cv_func_alloca_works" >&6; }
+
+-echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
+ if test $ac_cv_func_alloca_works = yes; then
+- cat >> confdefs.h <<\EOF
+-#define HAVE_ALLOCA 1
+-EOF
+
+-fi
++$as_echo "#define HAVE_ALLOCA 1" >>confdefs.h
+
+-if test $ac_cv_func_alloca_works = no; then
++else
+ # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+- # that cause trouble. Some versions do not even contain alloca or
+- # contain a buggy version. If you still want to use their alloca,
+- # use ar to extract alloca.o from them instead of compiling alloca.c.
+- ALLOCA=alloca.o
+- cat >> confdefs.h <<\EOF
+-#define C_ALLOCA 1
+-EOF
+-
+-
+-echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
+-echo "configure:2929: checking whether alloca needs Cray hooks" >&5
+-if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2934 "configure"
+-#include "confdefs.h"
+-#if defined(CRAY) && ! defined(CRAY2)
++# that cause trouble. Some versions do not even contain alloca or
++# contain a buggy version. If you still want to use their alloca,
++# use ar to extract alloca.o from them instead of compiling alloca.c.
++
++ALLOCA=\${LIBOBJDIR}alloca.$ac_objext
++
++$as_echo "#define C_ALLOCA 1" >>confdefs.h
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5
++$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
++if ${ac_cv_os_cray+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#if defined CRAY && ! defined CRAY2
+ webecray
+ #else
+ wenotbecray
+ #endif
+
+-EOF
++_ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "webecray" >/dev/null 2>&1; then
+- rm -rf conftest*
++ $EGREP "webecray" >/dev/null 2>&1; then :
+ ac_cv_os_cray=yes
+ else
+- rm -rf conftest*
+ ac_cv_os_cray=no
+ fi
+ rm -f conftest*
+
+ fi
+-
+-echo "$ac_t""$ac_cv_os_cray" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5
++$as_echo "$ac_cv_os_cray" >&6; }
+ if test $ac_cv_os_cray = yes; then
+-for ac_func in _getb67 GETB67 getb67; do
+- echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+-echo "configure:2959: checking for $ac_func" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 2964 "configure"
+-#include "confdefs.h"
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char $ac_func(); below. */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char $ac_func();
+-
+-int main() {
++ for ac_func in _getb67 GETB67 getb67; do
++ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
++ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
++if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+-choke me
+-#else
+-$ac_func();
+-#endif
+-
+-; return 0; }
+-EOF
+-if { (eval echo configure:2987: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=no"
+-fi
+-rm -f conftest*
+-fi
+-
+-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- cat >> confdefs.h <<EOF
++cat >>confdefs.h <<_ACEOF
+ #define CRAY_STACKSEG_END $ac_func
+-EOF
++_ACEOF
+
+- break
+-else
+- echo "$ac_t""no" 1>&6
++ break
+ fi
+
+-done
++ done
+ fi
+
+-echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
+-echo "configure:3014: checking stack direction for C alloca" >&5
+-if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
++$as_echo_n "checking stack direction for C alloca... " >&6; }
++if ${ac_cv_c_stack_direction+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- if test "$cross_compiling" = yes; then
++ if test "$cross_compiling" = yes; then :
+ ac_cv_c_stack_direction=0
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 3022 "configure"
+-#include "confdefs.h"
+-find_stack_direction ()
+-{
+- static char *addr = 0;
+- auto char dummy;
+- if (addr == 0)
+- {
+- addr = &dummy;
+- return find_stack_direction ();
+- }
+- else
+- return (&dummy > addr) ? 1 : -1;
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$ac_includes_default
++int
++find_stack_direction (int *addr, int depth)
++{
++ int dir, dummy = 0;
++ if (! addr)
++ addr = &dummy;
++ *addr = addr < &dummy ? 1 : addr == &dummy ? 0 : -1;
++ dir = depth ? find_stack_direction (addr, depth - 1) : 0;
++ return dir + dummy;
+ }
+-main ()
++
++int
++main (int argc, char **argv)
+ {
+- exit (find_stack_direction() < 0);
++ return find_stack_direction (0, argc + !argv + 20) < 0;
+ }
+-EOF
+-if { (eval echo configure:3041: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+-then
++_ACEOF
++if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_c_stack_direction=1
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -fr conftest*
+ ac_cv_c_stack_direction=-1
+ fi
+-rm -fr conftest*
++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
++ conftest.$ac_objext conftest.beam conftest.$ac_ext
+ fi
+
+ fi
+-
+-echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
+-cat >> confdefs.h <<EOF
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5
++$as_echo "$ac_cv_c_stack_direction" >&6; }
++cat >>confdefs.h <<_ACEOF
+ #define STACK_DIRECTION $ac_cv_c_stack_direction
+-EOF
++_ACEOF
++
+
+ fi
+
+-cat > conftest.$ac_ext <<EOF
+-#line 3063 "configure"
+-#include "confdefs.h"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <utime.h>
+-EOF
++
++_ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "struct.*utimbuf" >/dev/null 2>&1; then
+- rm -rf conftest*
+- cat >> confdefs.h <<\EOF
+-#define HAVE_STRUCT_UTIMBUF 1
+-EOF
++ $EGREP "struct.*utimbuf" >/dev/null 2>&1; then :
++ $as_echo "#define HAVE_STRUCT_UTIMBUF 1" >>confdefs.h
+
+ fi
+ rm -f conftest*
+
+
+ for ac_func in gettimeofday settimeofday
+-do
+-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+-echo "configure:3081: checking for $ac_func" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 3086 "configure"
+-#include "confdefs.h"
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char $ac_func(); below. */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char $ac_func();
+-
+-int main() {
+-
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+-choke me
+-#else
+-$ac_func();
+-#endif
++do :
++ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
++ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
++if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
++ cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
++_ACEOF
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:3109: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=no"
+-fi
+-rm -f conftest*
+-fi
+-
+-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_func 1
+-EOF
+-
+-else
+- echo "$ac_t""no" 1>&6
+ fi
+ done
+
+ for ac_func in strchr memcpy select vprintf
+-do
+-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+-echo "configure:3136: checking for $ac_func" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 3141 "configure"
+-#include "confdefs.h"
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char $ac_func(); below. */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char $ac_func();
++do :
++ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
++ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
++if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
++ cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
++_ACEOF
+
+-int main() {
++fi
++done
+
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+-choke me
+-#else
+-$ac_func();
+-#endif
++for ac_func in times rdchk utime syslog siginterrupt
++do :
++ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
++ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
++if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
++ cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
++_ACEOF
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:3164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=no"
+-fi
+-rm -f conftest*
+ fi
++done
++
++ac_fn_c_check_func "$LINENO" "mkdir" "ac_cv_func_mkdir"
++if test "x$ac_cv_func_mkdir" = xyes; then :
++ $as_echo "#define HAVE_MKDIR 1" >>confdefs.h
+
+-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_func 1
+-EOF
+-
+ else
+- echo "$ac_t""no" 1>&6
+-fi
+-done
++ case " $LIBOBJS " in
++ *" mkdir.$ac_objext "* ) ;;
++ *) LIBOBJS="$LIBOBJS mkdir.$ac_objext"
++ ;;
++esac
+
+-for ac_func in times rdchk utime syslog siginterrupt
+-do
+-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+-echo "configure:3191: checking for $ac_func" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 3196 "configure"
+-#include "confdefs.h"
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char $ac_func(); below. */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char $ac_func();
++fi
+
+-int main() {
++ac_fn_c_check_func "$LINENO" "mktime" "ac_cv_func_mktime"
++if test "x$ac_cv_func_mktime" = xyes; then :
++ $as_echo "#define HAVE_MKTIME 1" >>confdefs.h
+
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+-choke me
+-#else
+-$ac_func();
+-#endif
++else
++ case " $LIBOBJS " in
++ *" mktime.$ac_objext "* ) ;;
++ *) LIBOBJS="$LIBOBJS mktime.$ac_objext"
++ ;;
++esac
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:3219: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=no"
+-fi
+-rm -f conftest*
+ fi
+
+-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_func 1
+-EOF
+-
++ac_fn_c_check_func "$LINENO" "strerror" "ac_cv_func_strerror"
++if test "x$ac_cv_func_strerror" = xyes; then :
++ $as_echo "#define HAVE_STRERROR 1" >>confdefs.h
++
+ else
+- echo "$ac_t""no" 1>&6
+-fi
+-done
++ case " $LIBOBJS " in
++ *" strerror.$ac_objext "* ) ;;
++ *) LIBOBJS="$LIBOBJS strerror.$ac_objext"
++ ;;
++esac
+
+-for ac_func in mkdir mktime strerror strstr strdup strtoul strtol strpbrk
+-do
+-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+-echo "configure:3246: checking for $ac_func" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 3251 "configure"
+-#include "confdefs.h"
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char $ac_func(); below. */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char $ac_func();
++fi
+
+-int main() {
++ac_fn_c_check_func "$LINENO" "strstr" "ac_cv_func_strstr"
++if test "x$ac_cv_func_strstr" = xyes; then :
++ $as_echo "#define HAVE_STRSTR 1" >>confdefs.h
+
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+-choke me
+-#else
+-$ac_func();
+-#endif
++else
++ case " $LIBOBJS " in
++ *" strstr.$ac_objext "* ) ;;
++ *) LIBOBJS="$LIBOBJS strstr.$ac_objext"
++ ;;
++esac
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:3274: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=no"
+-fi
+-rm -f conftest*
+ fi
+
+-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_func 1
+-EOF
+-
++ac_fn_c_check_func "$LINENO" "strdup" "ac_cv_func_strdup"
++if test "x$ac_cv_func_strdup" = xyes; then :
++ $as_echo "#define HAVE_STRDUP 1" >>confdefs.h
++
+ else
+- echo "$ac_t""no" 1>&6
+-LIBOBJS="$LIBOBJS ${ac_func}.o"
++ case " $LIBOBJS " in
++ *" strdup.$ac_objext "* ) ;;
++ *) LIBOBJS="$LIBOBJS strdup.$ac_objext"
++ ;;
++esac
++
+ fi
+-done
+
++ac_fn_c_check_func "$LINENO" "strtoul" "ac_cv_func_strtoul"
++if test "x$ac_cv_func_strtoul" = xyes; then :
++ $as_echo "#define HAVE_STRTOUL 1" >>confdefs.h
+
+-for ac_func in stpcpy strftime vasprintf
+-do
+-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+-echo "configure:3303: checking for $ac_func" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 3308 "configure"
+-#include "confdefs.h"
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char $ac_func(); below. */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char $ac_func();
++else
++ case " $LIBOBJS " in
++ *" strtoul.$ac_objext "* ) ;;
++ *) LIBOBJS="$LIBOBJS strtoul.$ac_objext"
++ ;;
++esac
+
+-int main() {
++fi
+
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+-choke me
+-#else
+-$ac_func();
+-#endif
++ac_fn_c_check_func "$LINENO" "strtol" "ac_cv_func_strtol"
++if test "x$ac_cv_func_strtol" = xyes; then :
++ $as_echo "#define HAVE_STRTOL 1" >>confdefs.h
++
++else
++ case " $LIBOBJS " in
++ *" strtol.$ac_objext "* ) ;;
++ *) LIBOBJS="$LIBOBJS strtol.$ac_objext"
++ ;;
++esac
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:3331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=no"
+-fi
+-rm -f conftest*
+ fi
+
+-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_func 1
+-EOF
+-
++ac_fn_c_check_func "$LINENO" "strpbrk" "ac_cv_func_strpbrk"
++if test "x$ac_cv_func_strpbrk" = xyes; then :
++ $as_echo "#define HAVE_STRPBRK 1" >>confdefs.h
++
+ else
+- echo "$ac_t""no" 1>&6
+-LIBOBJS="$LIBOBJS ${ac_func}.o"
++ case " $LIBOBJS " in
++ *" strpbrk.$ac_objext "* ) ;;
++ *) LIBOBJS="$LIBOBJS strpbrk.$ac_objext"
++ ;;
++esac
++
+ fi
+-done
+
+
++ac_fn_c_check_func "$LINENO" "stpcpy" "ac_cv_func_stpcpy"
++if test "x$ac_cv_func_stpcpy" = xyes; then :
++ $as_echo "#define HAVE_STPCPY 1" >>confdefs.h
+
+-echo $ac_n "checking for getopt_long""... $ac_c" 1>&6
+-echo "configure:3359: checking for getopt_long" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_getopt_long'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 3364 "configure"
+-#include "confdefs.h"
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char getopt_long(); below. */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char getopt_long();
++ case " $LIBOBJS " in
++ *" stpcpy.$ac_objext "* ) ;;
++ *) LIBOBJS="$LIBOBJS stpcpy.$ac_objext"
++ ;;
++esac
+
+-int main() {
++fi
+
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined (__stub_getopt_long) || defined (__stub___getopt_long)
+-choke me
+-#else
+-getopt_long();
+-#endif
++ac_fn_c_check_func "$LINENO" "strftime" "ac_cv_func_strftime"
++if test "x$ac_cv_func_strftime" = xyes; then :
++ $as_echo "#define HAVE_STRFTIME 1" >>confdefs.h
++
++else
++ case " $LIBOBJS " in
++ *" strftime.$ac_objext "* ) ;;
++ *) LIBOBJS="$LIBOBJS strftime.$ac_objext"
++ ;;
++esac
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:3387: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_func_getopt_long=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_getopt_long=no"
+-fi
+-rm -f conftest*
+ fi
+
+-if eval "test \"`echo '$ac_cv_func_'getopt_long`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- :
++ac_fn_c_check_func "$LINENO" "vasprintf" "ac_cv_func_vasprintf"
++if test "x$ac_cv_func_vasprintf" = xyes; then :
++ $as_echo "#define HAVE_VASPRINTF 1" >>confdefs.h
++
+ else
+- echo "$ac_t""no" 1>&6
+-LIBOBJS="$LIBOBJS getopt1.o getopt.o"
++ case " $LIBOBJS " in
++ *" vasprintf.$ac_objext "* ) ;;
++ *) LIBOBJS="$LIBOBJS vasprintf.$ac_objext"
++ ;;
++esac
++
+ fi
+
+
+
+-cat >> confdefs.h <<\EOF
+-#define HAVE_STRERROR 1
+-EOF
++ac_fn_c_check_func "$LINENO" "getopt_long" "ac_cv_func_getopt_long"
++if test "x$ac_cv_func_getopt_long" = xyes; then :
+
++else
++ LIBOBJS="$LIBOBJS getopt1.o getopt.o"
++fi
+
+
+
+-echo $ac_n "checking for ftime""... $ac_c" 1>&6
+-echo "configure:3417: checking for ftime" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_ftime'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 3422 "configure"
+-#include "confdefs.h"
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char ftime(); below. */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char ftime();
++$as_echo "#define HAVE_STRERROR 1" >>confdefs.h
+
+-int main() {
+
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined (__stub_ftime) || defined (__stub___ftime)
+-choke me
+-#else
+-ftime();
+-#endif
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:3445: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_func_ftime=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_ftime=no"
+-fi
+-rm -f conftest*
+-fi
+
+-if eval "test \"`echo '$ac_cv_func_'ftime`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- echo $ac_n "checking that ftime works correctly""... $ac_c" 1>&6
+-echo "configure:3460: checking that ftime works correctly" >&5
+-if eval "test \"`echo '$''{'lrzsz_cv_sys_ftime_ok'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ac_fn_c_check_func "$LINENO" "ftime" "ac_cv_func_ftime"
++if test "x$ac_cv_func_ftime" = xyes; then :
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking that ftime works correctly" >&5
++$as_echo_n "checking that ftime works correctly... " >&6; }
++if ${lrzsz_cv_sys_ftime_ok+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- if test "$cross_compiling" = yes; then
++ if test "$cross_compiling" = yes; then :
+ lrzsz_cv_sys_ftime_ok=runtime
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 3468 "configure"
+-#include "confdefs.h"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+
+ #include <sys/types.h>
+ #include <sys/timeb.h>
+@@ -3492,88 +6001,82 @@ main ()
+ exit (0);
+ }
+
+-EOF
+-if { (eval echo configure:3497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+-then
++_ACEOF
++if ac_fn_c_try_run "$LINENO"; then :
+ lrzsz_cv_sys_ftime_ok=yes
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -fr conftest*
+ lrzsz_cv_sys_ftime_ok=no
+ fi
+-rm -fr conftest*
++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
++ conftest.$ac_objext conftest.beam conftest.$ac_ext
+ fi
+
+ fi
+
+ case $lrzsz_cv_sys_ftime_ok in
+-yes) cat >> confdefs.h <<\EOF
+-#define HAVE_FTIME 1
+-EOF
+- echo "$ac_t""yes" 1>&6 ;;
+-no) echo "$ac_t""no" 1>&6
+- echo "configure: warning: ftime seems to be buggy" 1>&2 ;;
+-runtime) cat >> confdefs.h <<\EOF
+-#define HAVE_FTIME 1
+-EOF
++yes) $as_echo "#define HAVE_FTIME 1" >>confdefs.h
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; } ;;
++no) { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ftime seems to be buggy" >&5
++$as_echo "$as_me: WARNING: ftime seems to be buggy" >&2;} ;;
++runtime) $as_echo "#define HAVE_FTIME 1" >>confdefs.h
+
+- echo "$ac_t""will check at run time" 1>&6 ;;
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: will check at run time" >&5
++$as_echo "will check at run time" >&6; } ;;
+ esac
+
+-else
+- echo "$ac_t""no" 1>&6
+ fi
+
+
+-echo $ac_n "checking for timezone variable""... $ac_c" 1>&6
+-echo "configure:3531: checking for timezone variable" >&5
+-if eval "test \"`echo '$''{'libquark_cv_var_timezone'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for timezone variable" >&5
++$as_echo_n "checking for timezone variable... " >&6; }
++if ${libquark_cv_var_timezone+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+-
+-cat > conftest.$ac_ext <<EOF
+-#line 3537 "configure"
+-#include "confdefs.h"
++
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+ #include <time.h>
+-int main() {
++int
++main ()
++{
+ return(int)(timezone/2);
+-; return 0; }
+-EOF
+-if { (eval echo configure:3544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
+ libquark_cv_var_timezone=yes
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+ libquark_cv_var_timezone=no
+ fi
+-rm -f conftest*
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+
+ fi
+
+ if test $libquark_cv_var_timezone = yes ; then
+- echo "$ac_t""yes" 1>&6
+- cat >> confdefs.h <<\EOF
+-#define HAVE_TIMEZONE_VAR 1
+-EOF
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++ $as_echo "#define HAVE_TIMEZONE_VAR 1" >>confdefs.h
+
+ else
+- echo "$ac_t""no" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+ if test "x$lookup_facility" = x ; then
+ :
+ else
+- echo $ac_n "checking for $lookup_facility""... $ac_c" 1>&6
+-echo "configure:3570: checking for $lookup_facility" >&5
+- if eval "test \"`echo '$''{'lrzsz_cv_lookup_facility'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+-
+- cat > conftest.$ac_ext <<EOF
+-#line 3576 "configure"
+-#include "confdefs.h"
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $lookup_facility" >&5
++$as_echo_n "checking for $lookup_facility... " >&6; }
++ if ${lrzsz_cv_lookup_facility+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+
+ #ifdef HAVE_SYSLOG_H
+ #include <syslog.h>
+@@ -3583,1562 +6086,4174 @@ else
+ #ifdef $lookup_facility
+ ihave$lookup_facility
+ #endif
+-
+-EOF
++
++_ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "ihave$lookup_facility" >/dev/null 2>&1; then
+- rm -rf conftest*
++ $EGREP "ihave$lookup_facility" >/dev/null 2>&1; then :
+ lrzsz_cv_lookup_facility=yes
+ else
+- rm -rf conftest*
+ lrzsz_cv_lookup_facility=no
+ fi
+ rm -f conftest*
+
+-
++
+ fi
+
+ if test $lrzsz_cv_lookup_facility = yes ; then
+- echo "$ac_t""yes" 1>&6
+- cat >> confdefs.h <<EOF
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++ cat >>confdefs.h <<_ACEOF
+ #define ENABLE_SYSLOG $lookup_facility
+-EOF
++_ACEOF
+
+ else
+- cat >> confdefs.h <<\EOF
+-#define ENABLE_SYSLOG LOG_USER
+-EOF
++ $as_echo "#define ENABLE_SYSLOG LOG_USER" >>confdefs.h
+
+- echo "$ac_t""no" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+ fi
+
+
+
+
+-
+-
+-
+- for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \
+-unistd.h values.h sys/param.h
+-do
+-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+-echo "configure:3628: checking for $ac_hdr" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 3633 "configure"
+-#include "confdefs.h"
+-#include <$ac_hdr>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:3638: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
+-else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
+-fi
+-rm -f conftest*
+-fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_hdr 1
+-EOF
+-
+-else
+- echo "$ac_t""no" 1>&6
+-fi
+-done
+-
+- for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \
+-__argz_count __argz_stringify __argz_next
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
++$as_echo_n "checking for a sed that does not truncate output... " >&6; }
++if ${ac_cv_path_SED+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
++ for ac_i in 1 2 3 4 5 6 7; do
++ ac_script="$ac_script$as_nl$ac_script"
++ done
++ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
++ { ac_script=; unset ac_script;}
++ if test -z "$SED"; then
++ ac_path_SED_found=false
++ # Loop through the user's path and test for each of PROGNAME-LIST
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
+ do
+-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+-echo "configure:3668: checking for $ac_func" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 3673 "configure"
+-#include "confdefs.h"
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char $ac_func(); below. */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char $ac_func();
+-
+-int main() {
+-
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+-choke me
+-#else
+-$ac_func();
+-#endif
+-
+-; return 0; }
+-EOF
+-if { (eval echo configure:3696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=no"
+-fi
+-rm -f conftest*
+-fi
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_prog in sed gsed; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
++ as_fn_executable_p "$ac_path_SED" || continue
++# Check for GNU ac_path_SED and select it if it is found.
++ # Check for GNU $ac_path_SED
++case `"$ac_path_SED" --version 2>&1` in
++*GNU*)
++ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
++*)
++ ac_count=0
++ $as_echo_n 0123456789 >"conftest.in"
++ while :
++ do
++ cat "conftest.in" "conftest.in" >"conftest.tmp"
++ mv "conftest.tmp" "conftest.in"
++ cp "conftest.in" "conftest.nl"
++ $as_echo '' >> "conftest.nl"
++ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
++ as_fn_arith $ac_count + 1 && ac_count=$as_val
++ if test $ac_count -gt ${ac_path_SED_max-0}; then
++ # Best one so far, save it but keep looking for a better one
++ ac_cv_path_SED="$ac_path_SED"
++ ac_path_SED_max=$ac_count
++ fi
++ # 10*(2^10) chars as input seems more than enough
++ test $ac_count -gt 10 && break
++ done
++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
++esac
+
+-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_func 1
+-EOF
+-
++ $ac_path_SED_found && break 3
++ done
++ done
++ done
++IFS=$as_save_IFS
++ if test -z "$ac_cv_path_SED"; then
++ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
++ fi
+ else
+- echo "$ac_t""no" 1>&6
++ ac_cv_path_SED=$SED
+ fi
+-done
+-
+
+- if test "${ac_cv_func_stpcpy+set}" != "set"; then
+- for ac_func in stpcpy
+-do
+-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+-echo "configure:3725: checking for $ac_func" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 3730 "configure"
+-#include "confdefs.h"
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char $ac_func(); below. */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char $ac_func();
+-
+-int main() {
+-
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+-choke me
+-#else
+-$ac_func();
+-#endif
+-
+-; return 0; }
+-EOF
+-if { (eval echo configure:3753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=no"
+-fi
+-rm -f conftest*
+ fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
++$as_echo "$ac_cv_path_SED" >&6; }
++ SED="$ac_cv_path_SED"
++ rm -f conftest.sed
++
+
+-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_func 1
+-EOF
+-
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
++$as_echo_n "checking whether NLS is requested... " >&6; }
++ # Check whether --enable-nls was given.
++if test "${enable_nls+set}" = set; then :
++ enableval=$enable_nls; USE_NLS=$enableval
+ else
+- echo "$ac_t""no" 1>&6
++ USE_NLS=yes
+ fi
+-done
+-
+- fi
+- if test "${ac_cv_func_stpcpy}" = "yes"; then
+- cat >> confdefs.h <<\EOF
+-#define HAVE_STPCPY 1
+-EOF
+
+- fi
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
++$as_echo "$USE_NLS" >&6; }
+
+- if test $ac_cv_header_locale_h = yes; then
+- echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
+-echo "configure:3787: checking for LC_MESSAGES" >&5
+-if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 3792 "configure"
+-#include "confdefs.h"
+-#include <locale.h>
+-int main() {
+-return LC_MESSAGES
+-; return 0; }
+-EOF
+-if { (eval echo configure:3799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- am_cv_val_LC_MESSAGES=yes
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- am_cv_val_LC_MESSAGES=no
+-fi
+-rm -f conftest*
+-fi
+
+-echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6
+- if test $am_cv_val_LC_MESSAGES = yes; then
+- cat >> confdefs.h <<\EOF
+-#define HAVE_LC_MESSAGES 1
+-EOF
+
+- fi
+- fi
+- echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
+-echo "configure:3820: checking whether NLS is requested" >&5
+- # Check whether --enable-nls or --disable-nls was given.
+-if test "${enable_nls+set}" = set; then
+- enableval="$enable_nls"
+- USE_NLS=$enableval
+-else
+- USE_NLS=yes
+-fi
+
+- echo "$ac_t""$USE_NLS" 1>&6
+-
++ GETTEXT_MACRO_VERSION=0.20
+
+- USE_INCLUDED_LIBINTL=no
+
+- if test "$USE_NLS" = "yes"; then
+- cat >> confdefs.h <<\EOF
+-#define ENABLE_NLS 1
+-EOF
+-
+- echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
+-echo "configure:3840: checking whether included gettext is requested" >&5
+- # Check whether --with-included-gettext or --without-included-gettext was given.
+-if test "${with_included_gettext+set}" = set; then
+- withval="$with_included_gettext"
+- nls_cv_force_use_gnu_gettext=$withval
+-else
+- nls_cv_force_use_gnu_gettext=no
+-fi
+-
+- echo "$ac_t""$nls_cv_force_use_gnu_gettext" 1>&6
+-
+- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+- nls_cv_header_intl=
+- nls_cv_header_libgt=
+- CATOBJEXT=NONE
+-
+- ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
+-echo "configure:3859: checking for libintl.h" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 3864 "configure"
+-#include "confdefs.h"
+-#include <libintl.h>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:3869: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
+-else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
+-fi
+-rm -f conftest*
+-fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
+-echo "configure:3886: checking for gettext in libc" >&5
+-if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 3891 "configure"
+-#include "confdefs.h"
+-#include <libintl.h>
+-int main() {
+-return (int) gettext ("")
+-; return 0; }
+-EOF
+-if { (eval echo configure:3898: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- gt_cv_func_gettext_libc=yes
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- gt_cv_func_gettext_libc=no
+-fi
+-rm -f conftest*
+-fi
+
+-echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
+
+- if test "$gt_cv_func_gettext_libc" != "yes"; then
+- echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
+-echo "configure:3914: checking for bindtextdomain in -lintl" >&5
+-ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- ac_save_LIBS="$LIBS"
+-LIBS="-lintl $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 3922 "configure"
+-#include "confdefs.h"
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char bindtextdomain();
+-
+-int main() {
+-bindtextdomain()
+-; return 0; }
+-EOF
+-if { (eval echo configure:3933: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
+-
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
+-echo "configure:3949: checking for gettext in libintl" >&5
+-if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 3954 "configure"
+-#include "confdefs.h"
+-
+-int main() {
+-return (int) gettext ("")
+-; return 0; }
+-EOF
+-if { (eval echo configure:3961: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- gt_cv_func_gettext_libintl=yes
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- gt_cv_func_gettext_libintl=no
+-fi
+-rm -f conftest*
++# Prepare PATH_SEPARATOR.
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
++ # contains only /bin. Note that ksh looks also at the FPATH variable,
++ # so we have to set that as well for the test.
++ PATH_SEPARATOR=:
++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
++ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
++ || PATH_SEPARATOR=';'
++ }
+ fi
+
+-echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6
++# Find out how to test for executable files. Don't use a zero-byte file,
++# as systems may use methods other than mode bits to determine executability.
++cat >conf$$.file <<_ASEOF
++#! /bin/sh
++exit 0
++_ASEOF
++chmod +x conf$$.file
++if test -x conf$$.file >/dev/null 2>&1; then
++ ac_executable_p="test -x"
+ else
+- echo "$ac_t""no" 1>&6
++ ac_executable_p="test -f"
+ fi
++rm -f conf$$.file
+
+- fi
+-
+- if test "$gt_cv_func_gettext_libc" = "yes" \
+- || test "$gt_cv_func_gettext_libintl" = "yes"; then
+- cat >> confdefs.h <<\EOF
+-#define HAVE_GETTEXT 1
+-EOF
+-
+- # Extract the first word of "msgfmt", so it can be a program name with args.
++# Extract the first word of "msgfmt", so it can be a program name with args.
+ set dummy msgfmt; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:3989: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_path_MSGFMT+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+ case "$MSGFMT" in
+- /*)
+- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+- ;;
++ [\\/]* | ?:[\\/]*)
++ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
++ ;;
+ *)
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+- for ac_dir in $PATH; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+- ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+- break
+- fi
+- fi
+- done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
+- ;;
++ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
++ for ac_dir in $PATH; do
++ IFS="$ac_save_IFS"
++ test -z "$ac_dir" && ac_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
++ echo "$as_me: trying $ac_dir/$ac_word..." >&5
++ if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
++ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
++ ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
++ break 2
++ fi
++ fi
++ done
++ done
++ IFS="$ac_save_IFS"
++ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
++ ;;
+ esac
+ fi
+ MSGFMT="$ac_cv_path_MSGFMT"
+-if test -n "$MSGFMT"; then
+- echo "$ac_t""$MSGFMT" 1>&6
++if test "$MSGFMT" != ":"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
++$as_echo "$MSGFMT" >&6; }
+ else
+- echo "$ac_t""no" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+- if test "$MSGFMT" != "no"; then
+- for ac_func in dcgettext
+-do
+-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+-echo "configure:4023: checking for $ac_func" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 4028 "configure"
+-#include "confdefs.h"
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char $ac_func(); below. */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char $ac_func();
+
+-int main() {
+-
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+-choke me
+-#else
+-$ac_func();
+-#endif
+-
+-; return 0; }
+-EOF
+-if { (eval echo configure:4051: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_$ac_func=no"
+-fi
+-rm -f conftest*
+-fi
+-
+-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_func 1
+-EOF
+-
+-else
+- echo "$ac_t""no" 1>&6
+-fi
+-done
+-
+- # Extract the first word of "gmsgfmt", so it can be a program name with args.
++ # Extract the first word of "gmsgfmt", so it can be a program name with args.
+ set dummy gmsgfmt; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:4078: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_path_GMSGFMT+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- case "$GMSGFMT" in
+- /*)
++ case $GMSGFMT in
++ [\\/]* | ?:[\\/]*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+- for ac_dir in $PATH; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+- break
+- fi
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
+ done
+- IFS="$ac_save_ifs"
++IFS=$as_save_IFS
++
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
+ esac
+ fi
+-GMSGFMT="$ac_cv_path_GMSGFMT"
++GMSGFMT=$ac_cv_path_GMSGFMT
+ if test -n "$GMSGFMT"; then
+- echo "$ac_t""$GMSGFMT" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
++$as_echo "$GMSGFMT" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++
++ case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
++ *) GMSGFMT_015=$GMSGFMT ;;
++ esac
++
++
++
++# Prepare PATH_SEPARATOR.
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
++ # contains only /bin. Note that ksh looks also at the FPATH variable,
++ # so we have to set that as well for the test.
++ PATH_SEPARATOR=:
++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
++ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
++ || PATH_SEPARATOR=';'
++ }
++fi
++
++# Find out how to test for executable files. Don't use a zero-byte file,
++# as systems may use methods other than mode bits to determine executability.
++cat >conf$$.file <<_ASEOF
++#! /bin/sh
++exit 0
++_ASEOF
++chmod +x conf$$.file
++if test -x conf$$.file >/dev/null 2>&1; then
++ ac_executable_p="test -x"
+ else
+- echo "$ac_t""no" 1>&6
++ ac_executable_p="test -f"
+ fi
++rm -f conf$$.file
+
+- # Extract the first word of "xgettext", so it can be a program name with args.
++# Extract the first word of "xgettext", so it can be a program name with args.
+ set dummy xgettext; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:4110: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_path_XGETTEXT+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+ case "$XGETTEXT" in
+- /*)
+- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+- ;;
++ [\\/]* | ?:[\\/]*)
++ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
++ ;;
+ *)
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+- for ac_dir in $PATH; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+- break
+- fi
+- fi
+- done
+- IFS="$ac_save_ifs"
++ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
++ for ac_dir in $PATH; do
++ IFS="$ac_save_IFS"
++ test -z "$ac_dir" && ac_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
++ echo "$as_me: trying $ac_dir/$ac_word..." >&5
++ if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
++ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
++ ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
++ break 2
++ fi
++ fi
++ done
++ done
++ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+- ;;
++ ;;
+ esac
+ fi
+ XGETTEXT="$ac_cv_path_XGETTEXT"
+-if test -n "$XGETTEXT"; then
+- echo "$ac_t""$XGETTEXT" 1>&6
++if test "$XGETTEXT" != ":"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
++$as_echo "$XGETTEXT" >&6; }
+ else
+- echo "$ac_t""no" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+- cat > conftest.$ac_ext <<EOF
+-#line 4142 "configure"
+-#include "confdefs.h"
++ rm -f messages.po
+
+-int main() {
+-extern int _nl_msg_cat_cntr;
+- return _nl_msg_cat_cntr
+-; return 0; }
+-EOF
+-if { (eval echo configure:4150: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- CATOBJEXT=.gmo
+- DATADIRNAME=share
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- CATOBJEXT=.mo
+- DATADIRNAME=lib
++ case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
++ *) XGETTEXT_015=$XGETTEXT ;;
++ esac
++
++
++
++# Prepare PATH_SEPARATOR.
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
++ # contains only /bin. Note that ksh looks also at the FPATH variable,
++ # so we have to set that as well for the test.
++ PATH_SEPARATOR=:
++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
++ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
++ || PATH_SEPARATOR=';'
++ }
++fi
++
++# Find out how to test for executable files. Don't use a zero-byte file,
++# as systems may use methods other than mode bits to determine executability.
++cat >conf$$.file <<_ASEOF
++#! /bin/sh
++exit 0
++_ASEOF
++chmod +x conf$$.file
++if test -x conf$$.file >/dev/null 2>&1; then
++ ac_executable_p="test -x"
++else
++ ac_executable_p="test -f"
++fi
++rm -f conf$$.file
++
++# Extract the first word of "msgmerge", so it can be a program name with args.
++set dummy msgmerge; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_path_MSGMERGE+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ case "$MSGMERGE" in
++ [\\/]* | ?:[\\/]*)
++ ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
++ ;;
++ *)
++ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
++ for ac_dir in $PATH; do
++ IFS="$ac_save_IFS"
++ test -z "$ac_dir" && ac_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
++ echo "$as_me: trying $ac_dir/$ac_word..." >&5
++ if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then
++ ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
++ break 2
++ fi
++ fi
++ done
++ done
++ IFS="$ac_save_IFS"
++ test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
++ ;;
++esac
+ fi
+-rm -f conftest*
+- INSTOBJEXT=.mo
+- fi
+- fi
+-
++MSGMERGE="$ac_cv_path_MSGMERGE"
++if test "$MSGMERGE" != ":"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
++$as_echo "$MSGMERGE" >&6; }
+ else
+- echo "$ac_t""no" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+
+- if test "$CATOBJEXT" = "NONE"; then
+- echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
+-echo "configure:4173: checking whether catgets can be used" >&5
+- # Check whether --with-catgets or --without-catgets was given.
+-if test "${with_catgets+set}" = set; then
+- withval="$with_catgets"
+- nls_cv_use_catgets=$withval
+-else
+- nls_cv_use_catgets=no
+-fi
+-
+- echo "$ac_t""$nls_cv_use_catgets" 1>&6
+-
+- if test "$nls_cv_use_catgets" = "yes"; then
+- echo $ac_n "checking for main in -li""... $ac_c" 1>&6
+-echo "configure:4186: checking for main in -li" >&5
+-ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- ac_save_LIBS="$LIBS"
+-LIBS="-li $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 4194 "configure"
+-#include "confdefs.h"
+-
+-int main() {
+-main()
+-; return 0; }
+-EOF
+-if { (eval echo configure:4201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=no"
++ if LC_ALL=C $MSGMERGE --help | grep ' --for-msgfmt ' >/dev/null; then
++ MSGMERGE_FOR_MSGFMT_OPTION='--for-msgfmt'
++ else
++ if LC_ALL=C $MSGMERGE --help | grep ' --no-fuzzy-matching ' >/dev/null; then
++ MSGMERGE_FOR_MSGFMT_OPTION='--no-fuzzy-matching --no-location --quiet'
++ else
++ MSGMERGE_FOR_MSGFMT_OPTION='--no-location --quiet'
++ fi
++ fi
++
++
++ test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
++
++
++ ac_config_commands="$ac_config_commands po-directories"
++
++
++
++ if test "X$prefix" = "XNONE"; then
++ acl_final_prefix="$ac_default_prefix"
++ else
++ acl_final_prefix="$prefix"
++ fi
++ if test "X$exec_prefix" = "XNONE"; then
++ acl_final_exec_prefix='${prefix}'
++ else
++ acl_final_exec_prefix="$exec_prefix"
++ fi
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
++ prefix="$acl_save_prefix"
++
++# Make sure we can run config.sub.
++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
++ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
++$as_echo_n "checking build system type... " >&6; }
++if ${ac_cv_build+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_build_alias=$build_alias
++test "x$ac_build_alias" = x &&
++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
++test "x$ac_build_alias" = x &&
++ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
++ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
++$as_echo "$ac_cv_build" >&6; }
++case $ac_cv_build in
++*-*-*) ;;
++*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
++esac
++build=$ac_cv_build
++ac_save_IFS=$IFS; IFS='-'
++set x $ac_cv_build
++shift
++build_cpu=$1
++build_vendor=$2
++shift; shift
++# Remember, the first character of IFS is used to create $*,
++# except with old shells:
++build_os=$*
++IFS=$ac_save_IFS
++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
++$as_echo_n "checking host system type... " >&6; }
++if ${ac_cv_host+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test "x$host_alias" = x; then
++ ac_cv_host=$ac_cv_build
++else
++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
++ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+ fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
+
+ fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_lib=HAVE_LIB`echo i | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_lib 1
+-EOF
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
++$as_echo "$ac_cv_host" >&6; }
++case $ac_cv_host in
++*-*-*) ;;
++*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
++esac
++host=$ac_cv_host
++ac_save_IFS=$IFS; IFS='-'
++set x $ac_cv_host
++shift
++host_cpu=$1
++host_vendor=$2
++shift; shift
++# Remember, the first character of IFS is used to create $*,
++# except with old shells:
++host_os=$*
++IFS=$ac_save_IFS
++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
++
++
+
+- LIBS="-li $LIBS"
+
++# Check whether --with-gnu-ld was given.
++if test "${with_gnu_ld+set}" = set; then :
++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
++else
++ with_gnu_ld=no
++fi
++
++# Prepare PATH_SEPARATOR.
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
++ # contains only /bin. Note that ksh looks also at the FPATH variable,
++ # so we have to set that as well for the test.
++ PATH_SEPARATOR=:
++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
++ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
++ || PATH_SEPARATOR=';'
++ }
++fi
++
++if test -n "$LD"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld" >&5
++$as_echo_n "checking for ld... " >&6; }
++elif test "$GCC" = yes; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
++$as_echo_n "checking for ld used by $CC... " >&6; }
++elif test "$with_gnu_ld" = yes; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
++$as_echo_n "checking for GNU ld... " >&6; }
+ else
+- echo "$ac_t""no" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
++$as_echo_n "checking for non-GNU ld... " >&6; }
+ fi
+-
+- echo $ac_n "checking for catgets""... $ac_c" 1>&6
+-echo "configure:4229: checking for catgets" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++if test -n "$LD"; then
++ # Let the user override the test with a path.
++ :
++else
++ if ${acl_cv_path_LD+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 4234 "configure"
+-#include "confdefs.h"
+-/* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char catgets(); below. */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char catgets();
+-
+-int main() {
+
+-/* The GNU C library defines this for functions which it implements
+- to always fail with ENOSYS. Some functions are actually named
+- something starting with __ and the normal name is an alias. */
+-#if defined (__stub_catgets) || defined (__stub___catgets)
+-choke me
+-#else
+-catgets();
+-#endif
++ acl_cv_path_LD= # Final result of this test
++ ac_prog=ld # Program to search in $PATH
++ if test "$GCC" = yes; then
++ # Check if gcc -print-prog-name=ld gives a path.
++ case $host in
++ *-*-mingw*)
++ # gcc leaves a trailing carriage return which upsets mingw
++ acl_output=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
++ *)
++ acl_output=`($CC -print-prog-name=ld) 2>&5` ;;
++ esac
++ case $acl_output in
++ # Accept absolute paths.
++ [\\/]* | ?:[\\/]*)
++ re_direlt='/[^/][^/]*/\.\./'
++ # Canonicalize the pathname of ld
++ acl_output=`echo "$acl_output" | sed 's%\\\\%/%g'`
++ while echo "$acl_output" | grep "$re_direlt" > /dev/null 2>&1; do
++ acl_output=`echo $acl_output | sed "s%$re_direlt%/%"`
++ done
++ # Got the pathname. No search in PATH is needed.
++ acl_cv_path_LD="$acl_output"
++ ac_prog=
++ ;;
++ "")
++ # If it fails, then pretend we aren't using GCC.
++ ;;
++ *)
++ # If it is relative, then search for the first ld in PATH.
++ with_gnu_ld=unknown
++ ;;
++ esac
++ fi
++ if test -n "$ac_prog"; then
++ # Search for $ac_prog in $PATH.
++ acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++ for ac_dir in $PATH; do
++ IFS="$acl_save_ifs"
++ test -z "$ac_dir" && ac_dir=.
++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
++ acl_cv_path_LD="$ac_dir/$ac_prog"
++ # Check to see if the program is GNU ld. I'd rather use --version,
++ # but apparently some variants of GNU ld only accept -v.
++ # Break only if it was the GNU/non-GNU ld that we prefer.
++ case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in
++ *GNU* | *'with BFD'*)
++ test "$with_gnu_ld" != no && break
++ ;;
++ *)
++ test "$with_gnu_ld" != yes && break
++ ;;
++ esac
++ fi
++ done
++ IFS="$acl_save_ifs"
++ fi
++ case $host in
++ *-*-aix*)
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#if defined __powerpc64__ || defined _ARCH_PPC64
++ int ok;
++ #else
++ error fail
++ #endif
++
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ # The compiler produces 64-bit code. Add option '-b64' so that the
++ # linker groks 64-bit object files.
++ case "$acl_cv_path_LD " in
++ *" -b64 "*) ;;
++ *) acl_cv_path_LD="$acl_cv_path_LD -b64" ;;
++ esac
++
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ;;
++ sparc64-*-netbsd*)
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#if defined __sparcv9 || defined __arch64__
++ int ok;
++ #else
++ error fail
++ #endif
++
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++
++else
++ # The compiler produces 32-bit code. Add option '-m elf32_sparc'
++ # so that the linker groks 32-bit object files.
++ case "$acl_cv_path_LD " in
++ *" -m elf32_sparc "*) ;;
++ *) acl_cv_path_LD="$acl_cv_path_LD -m elf32_sparc" ;;
++ esac
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:4257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+- rm -rf conftest*
+- eval "ac_cv_func_catgets=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_catgets=no"
+ fi
+-rm -f conftest*
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ;;
++ esac
++
+ fi
+
+-if eval "test \"`echo '$ac_cv_func_'catgets`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- cat >> confdefs.h <<\EOF
+-#define HAVE_CATGETS 1
+-EOF
+-
+- INTLOBJS="\$(CATOBJS)"
+- # Extract the first word of "gencat", so it can be a program name with args.
+-set dummy gencat; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:4279: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- case "$GENCAT" in
+- /*)
+- ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a path.
++ LD="$acl_cv_path_LD"
++fi
++if test -n "$LD"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
++$as_echo "$LD" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++ as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
++$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
++if ${acl_cv_prog_gnu_ld+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ # I'd rather use --version here, but apparently some GNU lds only accept -v.
++case `$LD -v 2>&1 </dev/null` in
++*GNU* | *'with BFD'*)
++ acl_cv_prog_gnu_ld=yes
+ ;;
+- *)
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+- for ac_dir in $PATH; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_path_GENCAT="$ac_dir/$ac_word"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_path_GENCAT" && ac_cv_path_GENCAT="no"
++*)
++ acl_cv_prog_gnu_ld=no
+ ;;
+ esac
+ fi
+-GENCAT="$ac_cv_path_GENCAT"
+-if test -n "$GENCAT"; then
+- echo "$ac_t""$GENCAT" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
++$as_echo "$acl_cv_prog_gnu_ld" >&6; }
++with_gnu_ld=$acl_cv_prog_gnu_ld
++
++
++
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
++$as_echo_n "checking for shared library run path origin... " >&6; }
++if ${acl_cv_rpath+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- echo "$ac_t""no" 1>&6
++
++ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
++ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
++ . ./conftest.sh
++ rm -f ./conftest.sh
++ acl_cv_rpath=done
++
+ fi
+- if test "$GENCAT" != "no"; then
+- # Extract the first word of "gmsgfmt", so it can be a program name with args.
+-set dummy gmsgfmt; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:4311: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
++$as_echo "$acl_cv_rpath" >&6; }
++ wl="$acl_cv_wl"
++ acl_libext="$acl_cv_libext"
++ acl_shlibext="$acl_cv_shlibext"
++ acl_libname_spec="$acl_cv_libname_spec"
++ acl_library_names_spec="$acl_cv_library_names_spec"
++ acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
++ acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
++ acl_hardcode_direct="$acl_cv_hardcode_direct"
++ acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
++ # Check whether --enable-rpath was given.
++if test "${enable_rpath+set}" = set; then :
++ enableval=$enable_rpath; :
+ else
+- case "$GMSGFMT" in
+- /*)
+- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+- ;;
+- *)
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+- for ac_dir in $PATH; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no"
+- ;;
+-esac
++ enable_rpath=yes
+ fi
+-GMSGFMT="$ac_cv_path_GMSGFMT"
+-if test -n "$GMSGFMT"; then
+- echo "$ac_t""$GMSGFMT" 1>&6
++
++
++
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking 32-bit host C ABI" >&5
++$as_echo_n "checking 32-bit host C ABI... " >&6; }
++if ${gl_cv_host_cpu_c_abi_32bit+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- echo "$ac_t""no" 1>&6
++ if test -n "$gl_cv_host_cpu_c_abi"; then
++ case "$gl_cv_host_cpu_c_abi" in
++ i386 | x86_64-x32 | arm | armhf | arm64-ilp32 | hppa | ia64-ilp32 | mips | mipsn32 | powerpc | riscv*-ilp32* | s390 | sparc)
++ gl_cv_host_cpu_c_abi_32bit=yes ;;
++ *)
++ gl_cv_host_cpu_c_abi_32bit=no ;;
++ esac
++ else
++ case "$host_cpu" in
++
++ i[4567]86 )
++ gl_cv_host_cpu_c_abi_32bit=yes
++ ;;
++
++ x86_64 )
++ # On x86_64 systems, the C compiler may be generating code in one of
++ # these ABIs:
++ # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64.
++ # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64
++ # with native Windows (mingw, MSVC).
++ # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32.
++ # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#if (defined __x86_64__ || defined __amd64__ \
++ || defined _M_X64 || defined _M_AMD64) \
++ && !(defined __ILP32__ || defined _ILP32)
++ int ok;
++ #else
++ error fail
++ #endif
++
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ gl_cv_host_cpu_c_abi_32bit=no
++else
++ gl_cv_host_cpu_c_abi_32bit=yes
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ;;
++
++ arm* | aarch64 )
++ # Assume arm with EABI.
++ # On arm64 systems, the C compiler may be generating code in one of
++ # these ABIs:
++ # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64.
++ # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32.
++ # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#if defined __aarch64__ && !(defined __ILP32__ || defined _ILP32)
++ int ok;
++ #else
++ error fail
++ #endif
++
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ gl_cv_host_cpu_c_abi_32bit=no
++else
++ gl_cv_host_cpu_c_abi_32bit=yes
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ;;
++
++ hppa1.0 | hppa1.1 | hppa2.0* | hppa64 )
++ # On hppa, the C compiler may be generating 32-bit code or 64-bit
++ # code. In the latter case, it defines _LP64 and __LP64__.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#ifdef __LP64__
++ int ok;
++ #else
++ error fail
++ #endif
++
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ gl_cv_host_cpu_c_abi_32bit=no
++else
++ gl_cv_host_cpu_c_abi_32bit=yes
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ;;
++
++ ia64* )
++ # On ia64 on HP-UX, the C compiler may be generating 64-bit code or
++ # 32-bit code. In the latter case, it defines _ILP32.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#ifdef _ILP32
++ int ok;
++ #else
++ error fail
++ #endif
++
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ gl_cv_host_cpu_c_abi_32bit=yes
++else
++ gl_cv_host_cpu_c_abi_32bit=no
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ;;
++
++ mips* )
++ # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this
++ # at 32.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64)
++ int ok;
++ #else
++ error fail
++ #endif
++
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ gl_cv_host_cpu_c_abi_32bit=no
++else
++ gl_cv_host_cpu_c_abi_32bit=yes
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ;;
++
++ powerpc* )
++ # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD.
++ # No need to distinguish them here; the caller may distinguish
++ # them based on the OS.
++ # On powerpc64 systems, the C compiler may still be generating
++ # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may
++ # be generating 64-bit code.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#if defined __powerpc64__ || defined _ARCH_PPC64
++ int ok;
++ #else
++ error fail
++ #endif
++
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ gl_cv_host_cpu_c_abi_32bit=no
++else
++ gl_cv_host_cpu_c_abi_32bit=yes
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ;;
++
++ rs6000 )
++ gl_cv_host_cpu_c_abi_32bit=yes
++ ;;
++
++ riscv32 | riscv64 )
++ # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d.
++ # Size of 'long' and 'void *':
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#if defined __LP64__
++ int ok;
++ #else
++ error fail
++ #endif
++
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ gl_cv_host_cpu_c_abi_32bit=no
++else
++ gl_cv_host_cpu_c_abi_32bit=yes
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ;;
++
++ s390* )
++ # On s390x, the C compiler may be generating 64-bit (= s390x) code
++ # or 31-bit (= s390) code.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#if defined __LP64__ || defined __s390x__
++ int ok;
++ #else
++ error fail
++ #endif
++
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ gl_cv_host_cpu_c_abi_32bit=no
++else
++ gl_cv_host_cpu_c_abi_32bit=yes
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ;;
++
++ sparc | sparc64 )
++ # UltraSPARCs running Linux have `uname -m` = "sparc64", but the
++ # C compiler still generates 32-bit code.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#if defined __sparcv9 || defined __arch64__
++ int ok;
++ #else
++ error fail
++ #endif
++
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ gl_cv_host_cpu_c_abi_32bit=no
++else
++ gl_cv_host_cpu_c_abi_32bit=yes
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ;;
++
++ *)
++ gl_cv_host_cpu_c_abi_32bit=no
++ ;;
++ esac
++ fi
++
+ fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_host_cpu_c_abi_32bit" >&5
++$as_echo "$gl_cv_host_cpu_c_abi_32bit" >&6; }
+
+- if test "$GMSGFMT" = "no"; then
+- # Extract the first word of "msgfmt", so it can be a program name with args.
+-set dummy msgfmt; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:4344: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ HOST_CPU_C_ABI_32BIT="$gl_cv_host_cpu_c_abi_32bit"
++
++
++
++
++
++ case "$host_os" in
++ solaris*)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5
++$as_echo_n "checking for 64-bit host... " >&6; }
++if ${gl_cv_solaris_64bit+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- case "$GMSGFMT" in
+- /*)
+- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+- ;;
+- *)
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+- for ac_dir in $PATH; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+- break
+- fi
+- fi
+- done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no"
+- ;;
+-esac
+-fi
+-GMSGFMT="$ac_cv_path_GMSGFMT"
+-if test -n "$GMSGFMT"; then
+- echo "$ac_t""$GMSGFMT" 1>&6
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#ifdef _LP64
++ int ok;
++ #else
++ error fail
++ #endif
++
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ gl_cv_solaris_64bit=yes
+ else
+- echo "$ac_t""no" 1>&6
++ gl_cv_solaris_64bit=no
+ fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+- fi
+- # Extract the first word of "xgettext", so it can be a program name with args.
+-set dummy xgettext; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:4379: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- case "$XGETTEXT" in
+- /*)
+- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+- ;;
+- *)
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+- for ac_dir in $PATH; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+- break
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5
++$as_echo "$gl_cv_solaris_64bit" >&6; };;
++ esac
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the common suffixes of directories in the library search path" >&5
++$as_echo_n "checking for the common suffixes of directories in the library search path... " >&6; }
++if ${acl_cv_libdirstems+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ acl_libdirstem=lib
++ acl_libdirstem2=
++ case "$host_os" in
++ solaris*)
++ if test $gl_cv_solaris_64bit = yes; then
++ acl_libdirstem=lib/64
++ case "$host_cpu" in
++ sparc*) acl_libdirstem2=lib/sparcv9 ;;
++ i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
++ esac
++ fi
++ ;;
++ *)
++ if test "$HOST_CPU_C_ABI_32BIT" != yes; then
++ searchpath=`(if test -f /usr/bin/gcc \
++ && LC_ALL=C /usr/bin/gcc -print-search-dirs >/dev/null 2>/dev/null; then \
++ LC_ALL=C /usr/bin/gcc -print-search-dirs; \
++ else \
++ LC_ALL=C $CC -print-search-dirs; \
++ fi) 2>/dev/null \
++ | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
++ if test -n "$searchpath"; then
++ acl_save_IFS="${IFS= }"; IFS=":"
++ for searchdir in $searchpath; do
++ if test -d "$searchdir"; then
++ case "$searchdir" in
++ */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
++ */../ | */.. )
++ # Better ignore directories of this form. They are misleading.
++ ;;
++ *) searchdir=`cd "$searchdir" && pwd`
++ case "$searchdir" in
++ */lib64 ) acl_libdirstem=lib64 ;;
++ esac ;;
++ esac
++ fi
++ done
++ IFS="$acl_save_IFS"
++ fi
++ fi
++ ;;
++ esac
++ test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
++ acl_cv_libdirstems="$acl_libdirstem,$acl_libdirstem2"
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_libdirstems" >&5
++$as_echo "$acl_cv_libdirstems" >&6; }
++ # Decompose acl_cv_libdirstems into acl_libdirstem and acl_libdirstem2.
++ acl_libdirstem=`echo "$acl_cv_libdirstems" | sed -e 's/,.*//'`
++ acl_libdirstem2=`echo "$acl_cv_libdirstems" | sed -e '/,/s/.*,//'`
++
++
++
++
++
++
++
++
++
++
++
++ use_additional=yes
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++
++ eval additional_includedir=\"$includedir\"
++ eval additional_libdir=\"$libdir\"
++
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++
++# Check whether --with-libiconv-prefix was given.
++if test "${with_libiconv_prefix+set}" = set; then :
++ withval=$with_libiconv_prefix;
++ if test "X$withval" = "Xno"; then
++ use_additional=no
++ else
++ if test "X$withval" = "X"; then
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++
++ eval additional_includedir=\"$includedir\"
++ eval additional_libdir=\"$libdir\"
++
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++ else
++ additional_includedir="$withval/include"
++ additional_libdir="$withval/$acl_libdirstem"
++ if test "$acl_libdirstem2" != "$acl_libdirstem" \
++ && test ! -d "$withval/$acl_libdirstem"; then
++ additional_libdir="$withval/$acl_libdirstem2"
++ fi
+ fi
+ fi
++
++fi
++
++ LIBICONV=
++ LTLIBICONV=
++ INCICONV=
++ LIBICONV_PREFIX=
++ HAVE_LIBICONV=
++ rpathdirs=
++ ltrpathdirs=
++ names_already_handled=
++ names_next_round='iconv '
++ while test -n "$names_next_round"; do
++ names_this_round="$names_next_round"
++ names_next_round=
++ for name in $names_this_round; do
++ already_handled=
++ for n in $names_already_handled; do
++ if test "$n" = "$name"; then
++ already_handled=yes
++ break
++ fi
++ done
++ if test -z "$already_handled"; then
++ names_already_handled="$names_already_handled $name"
++ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
++ eval value=\"\$HAVE_LIB$uppername\"
++ if test -n "$value"; then
++ if test "$value" = yes; then
++ eval value=\"\$LIB$uppername\"
++ test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
++ eval value=\"\$LTLIB$uppername\"
++ test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
++ else
++ :
++ fi
++ else
++ found_dir=
++ found_la=
++ found_so=
++ found_a=
++ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
++ if test -n "$acl_shlibext"; then
++ shrext=".$acl_shlibext" # typically: shrext=.so
++ else
++ shrext=
++ fi
++ if test $use_additional = yes; then
++ dir="$additional_libdir"
++ if test -n "$acl_shlibext"; then
++ if test -f "$dir/$libname$shrext"; then
++ found_dir="$dir"
++ found_so="$dir/$libname$shrext"
++ else
++ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
++ ver=`(cd "$dir" && \
++ for f in "$libname$shrext".*; do echo "$f"; done \
++ | sed -e "s,^$libname$shrext\\\\.,," \
++ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
++ | sed 1q ) 2>/dev/null`
++ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
++ found_dir="$dir"
++ found_so="$dir/$libname$shrext.$ver"
++ fi
++ else
++ eval library_names=\"$acl_library_names_spec\"
++ for f in $library_names; do
++ if test -f "$dir/$f"; then
++ found_dir="$dir"
++ found_so="$dir/$f"
++ break
++ fi
++ done
++ fi
++ fi
++ fi
++ if test "X$found_dir" = "X"; then
++ if test -f "$dir/$libname.$acl_libext"; then
++ found_dir="$dir"
++ found_a="$dir/$libname.$acl_libext"
++ fi
++ fi
++ if test "X$found_dir" != "X"; then
++ if test -f "$dir/$libname.la"; then
++ found_la="$dir/$libname.la"
++ fi
++ fi
++ fi
++ if test "X$found_dir" = "X"; then
++ for x in $LDFLAGS $LTLIBICONV; do
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++ eval x=\"$x\"
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++ case "$x" in
++ -L*)
++ dir=`echo "X$x" | sed -e 's/^X-L//'`
++ if test -n "$acl_shlibext"; then
++ if test -f "$dir/$libname$shrext"; then
++ found_dir="$dir"
++ found_so="$dir/$libname$shrext"
++ else
++ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
++ ver=`(cd "$dir" && \
++ for f in "$libname$shrext".*; do echo "$f"; done \
++ | sed -e "s,^$libname$shrext\\\\.,," \
++ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
++ | sed 1q ) 2>/dev/null`
++ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
++ found_dir="$dir"
++ found_so="$dir/$libname$shrext.$ver"
++ fi
++ else
++ eval library_names=\"$acl_library_names_spec\"
++ for f in $library_names; do
++ if test -f "$dir/$f"; then
++ found_dir="$dir"
++ found_so="$dir/$f"
++ break
++ fi
++ done
++ fi
++ fi
++ fi
++ if test "X$found_dir" = "X"; then
++ if test -f "$dir/$libname.$acl_libext"; then
++ found_dir="$dir"
++ found_a="$dir/$libname.$acl_libext"
++ fi
++ fi
++ if test "X$found_dir" != "X"; then
++ if test -f "$dir/$libname.la"; then
++ found_la="$dir/$libname.la"
++ fi
++ fi
++ ;;
++ esac
++ if test "X$found_dir" != "X"; then
++ break
++ fi
++ done
++ fi
++ if test "X$found_dir" != "X"; then
++ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
++ if test "X$found_so" != "X"; then
++ if test "$enable_rpath" = no \
++ || test "X$found_dir" = "X/usr/$acl_libdirstem" \
++ || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
++ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
++ else
++ haveit=
++ for x in $ltrpathdirs; do
++ if test "X$x" = "X$found_dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ ltrpathdirs="$ltrpathdirs $found_dir"
++ fi
++ if test "$acl_hardcode_direct" = yes; then
++ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
++ else
++ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
++ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
++ haveit=
++ for x in $rpathdirs; do
++ if test "X$x" = "X$found_dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ rpathdirs="$rpathdirs $found_dir"
++ fi
++ else
++ haveit=
++ for x in $LDFLAGS $LIBICONV; do
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++ eval x=\"$x\"
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++ if test "X$x" = "X-L$found_dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
++ fi
++ if test "$acl_hardcode_minus_L" != no; then
++ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
++ else
++ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
++ fi
++ fi
++ fi
++ fi
++ else
++ if test "X$found_a" != "X"; then
++ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
++ else
++ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
++ fi
++ fi
++ additional_includedir=
++ case "$found_dir" in
++ */$acl_libdirstem | */$acl_libdirstem/)
++ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
++ if test "$name" = 'iconv'; then
++ LIBICONV_PREFIX="$basedir"
++ fi
++ additional_includedir="$basedir/include"
++ ;;
++ */$acl_libdirstem2 | */$acl_libdirstem2/)
++ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
++ if test "$name" = 'iconv'; then
++ LIBICONV_PREFIX="$basedir"
++ fi
++ additional_includedir="$basedir/include"
++ ;;
++ esac
++ if test "X$additional_includedir" != "X"; then
++ if test "X$additional_includedir" != "X/usr/include"; then
++ haveit=
++ if test "X$additional_includedir" = "X/usr/local/include"; then
++ if test -n "$GCC"; then
++ case $host_os in
++ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
++ esac
++ fi
++ fi
++ if test -z "$haveit"; then
++ for x in $CPPFLAGS $INCICONV; do
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++ eval x=\"$x\"
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++ if test "X$x" = "X-I$additional_includedir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ if test -d "$additional_includedir"; then
++ INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
++ fi
++ fi
++ fi
++ fi
++ fi
++ if test -n "$found_la"; then
++ save_libdir="$libdir"
++ case "$found_la" in
++ */* | *\\*) . "$found_la" ;;
++ *) . "./$found_la" ;;
++ esac
++ libdir="$save_libdir"
++ for dep in $dependency_libs; do
++ case "$dep" in
++ -L*)
++ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
++ if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
++ && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
++ haveit=
++ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
++ || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
++ if test -n "$GCC"; then
++ case $host_os in
++ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
++ esac
++ fi
++ fi
++ if test -z "$haveit"; then
++ haveit=
++ for x in $LDFLAGS $LIBICONV; do
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++ eval x=\"$x\"
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++ if test "X$x" = "X-L$additional_libdir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ if test -d "$additional_libdir"; then
++ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
++ fi
++ fi
++ haveit=
++ for x in $LDFLAGS $LTLIBICONV; do
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++ eval x=\"$x\"
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++ if test "X$x" = "X-L$additional_libdir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ if test -d "$additional_libdir"; then
++ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
++ fi
++ fi
++ fi
++ fi
++ ;;
++ -R*)
++ dir=`echo "X$dep" | sed -e 's/^X-R//'`
++ if test "$enable_rpath" != no; then
++ haveit=
++ for x in $rpathdirs; do
++ if test "X$x" = "X$dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ rpathdirs="$rpathdirs $dir"
++ fi
++ haveit=
++ for x in $ltrpathdirs; do
++ if test "X$x" = "X$dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ ltrpathdirs="$ltrpathdirs $dir"
++ fi
++ fi
++ ;;
++ -l*)
++ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
++ ;;
++ *.la)
++ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
++ ;;
++ *)
++ LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
++ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
++ ;;
++ esac
++ done
++ fi
++ else
++ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
++ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
++ fi
++ fi
++ fi
++ done
+ done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+- ;;
+-esac
++ if test "X$rpathdirs" != "X"; then
++ if test -n "$acl_hardcode_libdir_separator"; then
++ alldirs=
++ for found_dir in $rpathdirs; do
++ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
++ done
++ acl_save_libdir="$libdir"
++ libdir="$alldirs"
++ eval flag=\"$acl_hardcode_libdir_flag_spec\"
++ libdir="$acl_save_libdir"
++ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
++ else
++ for found_dir in $rpathdirs; do
++ acl_save_libdir="$libdir"
++ libdir="$found_dir"
++ eval flag=\"$acl_hardcode_libdir_flag_spec\"
++ libdir="$acl_save_libdir"
++ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
++ done
++ fi
++ fi
++ if test "X$ltrpathdirs" != "X"; then
++ for found_dir in $ltrpathdirs; do
++ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
++ done
++ fi
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
++$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
++if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ gt_save_LIBS="$LIBS"
++ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <CoreFoundation/CFPreferences.h>
++int
++main ()
++{
++CFPreferencesCopyAppValue(NULL, NULL)
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ gt_cv_func_CFPreferencesCopyAppValue=yes
++else
++ gt_cv_func_CFPreferencesCopyAppValue=no
+ fi
+-XGETTEXT="$ac_cv_path_XGETTEXT"
+-if test -n "$XGETTEXT"; then
+- echo "$ac_t""$XGETTEXT" 1>&6
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ LIBS="$gt_save_LIBS"
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
++$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
++ if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
++
++$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h
++
++ fi
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5
++$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
++if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ gt_save_LIBS="$LIBS"
++ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <CoreFoundation/CFLocale.h>
++int
++main ()
++{
++CFLocaleCopyCurrent();
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ gt_cv_func_CFLocaleCopyCurrent=yes
+ else
+- echo "$ac_t""no" 1>&6
++ gt_cv_func_CFLocaleCopyCurrent=no
+ fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ LIBS="$gt_save_LIBS"
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
++$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
++ if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
++
++$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h
+
+- USE_INCLUDED_LIBINTL=yes
+- CATOBJEXT=.cat
+- INSTOBJEXT=.cat
+- DATADIRNAME=lib
+- INTLDEPS='$(top_builddir)/intl/libintl.a'
+- INTLLIBS=$INTLDEPS
+- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+- nls_cv_header_intl=intl/libintl.h
+- nls_cv_header_libgt=intl/libgettext.h
+- fi
++ fi
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyPreferredLanguages" >&5
++$as_echo_n "checking for CFLocaleCopyPreferredLanguages... " >&6; }
++if ${gt_cv_func_CFLocaleCopyPreferredLanguages+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ gt_save_LIBS="$LIBS"
++ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <CoreFoundation/CFLocale.h>
++int
++main ()
++{
++CFLocaleCopyPreferredLanguages();
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ gt_cv_func_CFLocaleCopyPreferredLanguages=yes
+ else
+- echo "$ac_t""no" 1>&6
++ gt_cv_func_CFLocaleCopyPreferredLanguages=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ LIBS="$gt_save_LIBS"
+ fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyPreferredLanguages" >&5
++$as_echo "$gt_cv_func_CFLocaleCopyPreferredLanguages" >&6; }
++ if test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
+
+- fi
+- fi
++$as_echo "#define HAVE_CFLOCALECOPYPREFERREDLANGUAGES 1" >>confdefs.h
+
+- if test "$CATOBJEXT" = "NONE"; then
+- nls_cv_use_gnu_gettext=yes
++ fi
++ INTL_MACOSX_LIBS=
++ if test $gt_cv_func_CFPreferencesCopyAppValue = yes \
++ || test $gt_cv_func_CFLocaleCopyCurrent = yes \
++ || test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
++ INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
++ fi
++
++
++
++
++
++
++ LIBINTL=
++ LTLIBINTL=
++ POSUB=
++
++ case " $gt_needs " in
++ *" need-formatstring-macros "*) gt_api_version=3 ;;
++ *" need-ngettext "*) gt_api_version=2 ;;
++ *) gt_api_version=1 ;;
++ esac
++ gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
++ gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
++
++ if test "$USE_NLS" = "yes"; then
++ gt_use_preinstalled_gnugettext=no
++
++
++ if test $gt_api_version -ge 3; then
++ gt_revision_test_code='
++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
++#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
++#endif
++typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
++'
++ else
++ gt_revision_test_code=
++ fi
++ if test $gt_api_version -ge 2; then
++ gt_expression_test_code=' + * ngettext ("", "", 0)'
++ else
++ gt_expression_test_code=
+ fi
+- fi
+
+- if test "$nls_cv_use_gnu_gettext" = "yes"; then
+- INTLOBJS="\$(GETTOBJS)"
+- # Extract the first word of "msgfmt", so it can be a program name with args.
+-set dummy msgfmt; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:4437: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5
++$as_echo_n "checking for GNU gettext in libc... " >&6; }
++if eval \${$gt_func_gnugettext_libc+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- case "$MSGFMT" in
+- /*)
+- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+- ;;
+- *)
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+- for ac_dir in $PATH; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+- ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+- break
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++#include <libintl.h>
++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
++extern int _nl_msg_cat_cntr;
++extern int *_nl_domain_bindings;
++#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings)
++#else
++#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
++#endif
++$gt_revision_test_code
++
++int
++main ()
++{
++
++bindtextdomain ("", "");
++return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ eval "$gt_func_gnugettext_libc=yes"
++else
++ eval "$gt_func_gnugettext_libc=no"
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++fi
++eval ac_res=\$$gt_func_gnugettext_libc
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++
++ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
++
++
++
++
++
++ am_save_CPPFLAGS="$CPPFLAGS"
++
++ for element in $INCICONV; do
++ haveit=
++ for x in $CPPFLAGS; do
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++ eval x=\"$x\"
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++ if test "X$x" = "X$element"; then
++ haveit=yes
++ break
+ fi
++ done
++ if test -z "$haveit"; then
++ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt"
+- ;;
+-esac
+-fi
+-MSGFMT="$ac_cv_path_MSGFMT"
+-if test -n "$MSGFMT"; then
+- echo "$ac_t""$MSGFMT" 1>&6
+-else
+- echo "$ac_t""no" 1>&6
+-fi
+
+- # Extract the first word of "gmsgfmt", so it can be a program name with args.
+-set dummy gmsgfmt; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:4471: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
++$as_echo_n "checking for iconv... " >&6; }
++if ${am_cv_func_iconv+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- case "$GMSGFMT" in
+- /*)
+- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+- ;;
+- *)
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+- for ac_dir in $PATH; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+- break
++
++ am_cv_func_iconv="no, consider installing GNU libiconv"
++ am_cv_lib_iconv=no
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++#include <stdlib.h>
++#include <iconv.h>
++
++int
++main ()
++{
++iconv_t cd = iconv_open("","");
++ iconv(cd,NULL,NULL,NULL,NULL);
++ iconv_close(cd);
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ am_cv_func_iconv=yes
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ if test "$am_cv_func_iconv" != yes; then
++ am_save_LIBS="$LIBS"
++ LIBS="$LIBS $LIBICONV"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++#include <stdlib.h>
++#include <iconv.h>
++
++int
++main ()
++{
++iconv_t cd = iconv_open("","");
++ iconv(cd,NULL,NULL,NULL,NULL);
++ iconv_close(cd);
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ am_cv_lib_iconv=yes
++ am_cv_func_iconv=yes
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ LIBS="$am_save_LIBS"
+ fi
+- done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+- ;;
+-esac
++
+ fi
+-GMSGFMT="$ac_cv_path_GMSGFMT"
+-if test -n "$GMSGFMT"; then
+- echo "$ac_t""$GMSGFMT" 1>&6
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
++$as_echo "$am_cv_func_iconv" >&6; }
++ if test "$am_cv_func_iconv" = yes; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5
++$as_echo_n "checking for working iconv... " >&6; }
++if ${am_cv_func_iconv_works+:} false; then :
++ $as_echo_n "(cached) " >&6
+ else
+- echo "$ac_t""no" 1>&6
+-fi
+
+- # Extract the first word of "xgettext", so it can be a program name with args.
+-set dummy xgettext; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:4503: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ am_save_LIBS="$LIBS"
++ if test $am_cv_lib_iconv = yes; then
++ LIBS="$LIBS $LIBICONV"
++ fi
++ am_cv_func_iconv_works=no
++ for ac_iconv_const in '' 'const'; do
++ if test "$cross_compiling" = yes; then :
++ case "$host_os" in
++ aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
++ *) am_cv_func_iconv_works="guessing yes" ;;
++ esac
+ else
+- case "$XGETTEXT" in
+- /*)
+- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+- ;;
+- *)
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+- for ac_dir in $PATH; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+- break
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++#include <iconv.h>
++#include <string.h>
++
++#ifndef ICONV_CONST
++# define ICONV_CONST $ac_iconv_const
++#endif
++
++int
++main ()
++{
++int result = 0;
++ /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
++ returns. */
++ {
++ iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
++ if (cd_utf8_to_88591 != (iconv_t)(-1))
++ {
++ static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */
++ char buf[10];
++ ICONV_CONST char *inptr = input;
++ size_t inbytesleft = strlen (input);
++ char *outptr = buf;
++ size_t outbytesleft = sizeof (buf);
++ size_t res = iconv (cd_utf8_to_88591,
++ &inptr, &inbytesleft,
++ &outptr, &outbytesleft);
++ if (res == 0)
++ result |= 1;
++ iconv_close (cd_utf8_to_88591);
++ }
++ }
++ /* Test against Solaris 10 bug: Failures are not distinguishable from
++ successful returns. */
++ {
++ iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
++ if (cd_ascii_to_88591 != (iconv_t)(-1))
++ {
++ static ICONV_CONST char input[] = "\263";
++ char buf[10];
++ ICONV_CONST char *inptr = input;
++ size_t inbytesleft = strlen (input);
++ char *outptr = buf;
++ size_t outbytesleft = sizeof (buf);
++ size_t res = iconv (cd_ascii_to_88591,
++ &inptr, &inbytesleft,
++ &outptr, &outbytesleft);
++ if (res == 0)
++ result |= 2;
++ iconv_close (cd_ascii_to_88591);
++ }
++ }
++ /* Test against AIX 6.1..7.1 bug: Buffer overrun. */
++ {
++ iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1");
++ if (cd_88591_to_utf8 != (iconv_t)(-1))
++ {
++ static ICONV_CONST char input[] = "\304";
++ static char buf[2] = { (char)0xDE, (char)0xAD };
++ ICONV_CONST char *inptr = input;
++ size_t inbytesleft = 1;
++ char *outptr = buf;
++ size_t outbytesleft = 1;
++ size_t res = iconv (cd_88591_to_utf8,
++ &inptr, &inbytesleft,
++ &outptr, &outbytesleft);
++ if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD)
++ result |= 4;
++ iconv_close (cd_88591_to_utf8);
++ }
++ }
++#if 0 /* This bug could be worked around by the caller. */
++ /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
++ {
++ iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
++ if (cd_88591_to_utf8 != (iconv_t)(-1))
++ {
++ static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
++ char buf[50];
++ ICONV_CONST char *inptr = input;
++ size_t inbytesleft = strlen (input);
++ char *outptr = buf;
++ size_t outbytesleft = sizeof (buf);
++ size_t res = iconv (cd_88591_to_utf8,
++ &inptr, &inbytesleft,
++ &outptr, &outbytesleft);
++ if ((int)res > 0)
++ result |= 8;
++ iconv_close (cd_88591_to_utf8);
++ }
++ }
++#endif
++ /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
++ provided. */
++ {
++ /* Try standardized names. */
++ iconv_t cd1 = iconv_open ("UTF-8", "EUC-JP");
++ /* Try IRIX, OSF/1 names. */
++ iconv_t cd2 = iconv_open ("UTF-8", "eucJP");
++ /* Try AIX names. */
++ iconv_t cd3 = iconv_open ("UTF-8", "IBM-eucJP");
++ /* Try HP-UX names. */
++ iconv_t cd4 = iconv_open ("utf8", "eucJP");
++ if (cd1 == (iconv_t)(-1) && cd2 == (iconv_t)(-1)
++ && cd3 == (iconv_t)(-1) && cd4 == (iconv_t)(-1))
++ result |= 16;
++ if (cd1 != (iconv_t)(-1))
++ iconv_close (cd1);
++ if (cd2 != (iconv_t)(-1))
++ iconv_close (cd2);
++ if (cd3 != (iconv_t)(-1))
++ iconv_close (cd3);
++ if (cd4 != (iconv_t)(-1))
++ iconv_close (cd4);
++ }
++ return result;
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_run "$LINENO"; then :
++ am_cv_func_iconv_works=yes
++fi
++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
++ conftest.$ac_objext conftest.beam conftest.$ac_ext
++fi
++
++ test "$am_cv_func_iconv_works" = no || break
++ done
++ LIBS="$am_save_LIBS"
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5
++$as_echo "$am_cv_func_iconv_works" >&6; }
++ case "$am_cv_func_iconv_works" in
++ *no) am_func_iconv=no am_cv_lib_iconv=no ;;
++ *) am_func_iconv=yes ;;
++ esac
++ else
++ am_func_iconv=no am_cv_lib_iconv=no
++ fi
++ if test "$am_func_iconv" = yes; then
++
++$as_echo "#define HAVE_ICONV 1" >>confdefs.h
++
++ fi
++ if test "$am_cv_lib_iconv" = yes; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
++$as_echo_n "checking how to link with libiconv... " >&6; }
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
++$as_echo "$LIBICONV" >&6; }
++ else
++ CPPFLAGS="$am_save_CPPFLAGS"
++ LIBICONV=
++ LTLIBICONV=
++ fi
++
++
++
++
++
++
++
++
++
++
++ use_additional=yes
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++
++ eval additional_includedir=\"$includedir\"
++ eval additional_libdir=\"$libdir\"
++
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++
++# Check whether --with-libintl-prefix was given.
++if test "${with_libintl_prefix+set}" = set; then :
++ withval=$with_libintl_prefix;
++ if test "X$withval" = "Xno"; then
++ use_additional=no
++ else
++ if test "X$withval" = "X"; then
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++
++ eval additional_includedir=\"$includedir\"
++ eval additional_libdir=\"$libdir\"
++
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++ else
++ additional_includedir="$withval/include"
++ additional_libdir="$withval/$acl_libdirstem"
++ if test "$acl_libdirstem2" != "$acl_libdirstem" \
++ && test ! -d "$withval/$acl_libdirstem"; then
++ additional_libdir="$withval/$acl_libdirstem2"
++ fi
+ fi
+ fi
+- done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+- ;;
+-esac
+-fi
+-XGETTEXT="$ac_cv_path_XGETTEXT"
+-if test -n "$XGETTEXT"; then
+- echo "$ac_t""$XGETTEXT" 1>&6
+-else
+- echo "$ac_t""no" 1>&6
++
+ fi
+
+-
+- USE_INCLUDED_LIBINTL=yes
+- CATOBJEXT=.gmo
+- INSTOBJEXT=.mo
+- DATADIRNAME=share
+- INTLDEPS='$(top_builddir)/intl/libintl.a'
+- INTLLIBS=$INTLDEPS
+- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+- nls_cv_header_intl=intl/libintl.h
+- nls_cv_header_libgt=intl/libgettext.h
++ LIBINTL=
++ LTLIBINTL=
++ INCINTL=
++ LIBINTL_PREFIX=
++ HAVE_LIBINTL=
++ rpathdirs=
++ ltrpathdirs=
++ names_already_handled=
++ names_next_round='intl '
++ while test -n "$names_next_round"; do
++ names_this_round="$names_next_round"
++ names_next_round=
++ for name in $names_this_round; do
++ already_handled=
++ for n in $names_already_handled; do
++ if test "$n" = "$name"; then
++ already_handled=yes
++ break
++ fi
++ done
++ if test -z "$already_handled"; then
++ names_already_handled="$names_already_handled $name"
++ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
++ eval value=\"\$HAVE_LIB$uppername\"
++ if test -n "$value"; then
++ if test "$value" = yes; then
++ eval value=\"\$LIB$uppername\"
++ test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
++ eval value=\"\$LTLIB$uppername\"
++ test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
++ else
++ :
++ fi
++ else
++ found_dir=
++ found_la=
++ found_so=
++ found_a=
++ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
++ if test -n "$acl_shlibext"; then
++ shrext=".$acl_shlibext" # typically: shrext=.so
++ else
++ shrext=
++ fi
++ if test $use_additional = yes; then
++ dir="$additional_libdir"
++ if test -n "$acl_shlibext"; then
++ if test -f "$dir/$libname$shrext"; then
++ found_dir="$dir"
++ found_so="$dir/$libname$shrext"
++ else
++ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
++ ver=`(cd "$dir" && \
++ for f in "$libname$shrext".*; do echo "$f"; done \
++ | sed -e "s,^$libname$shrext\\\\.,," \
++ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
++ | sed 1q ) 2>/dev/null`
++ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
++ found_dir="$dir"
++ found_so="$dir/$libname$shrext.$ver"
++ fi
++ else
++ eval library_names=\"$acl_library_names_spec\"
++ for f in $library_names; do
++ if test -f "$dir/$f"; then
++ found_dir="$dir"
++ found_so="$dir/$f"
++ break
++ fi
++ done
++ fi
++ fi
++ fi
++ if test "X$found_dir" = "X"; then
++ if test -f "$dir/$libname.$acl_libext"; then
++ found_dir="$dir"
++ found_a="$dir/$libname.$acl_libext"
++ fi
++ fi
++ if test "X$found_dir" != "X"; then
++ if test -f "$dir/$libname.la"; then
++ found_la="$dir/$libname.la"
++ fi
++ fi
++ fi
++ if test "X$found_dir" = "X"; then
++ for x in $LDFLAGS $LTLIBINTL; do
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++ eval x=\"$x\"
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++ case "$x" in
++ -L*)
++ dir=`echo "X$x" | sed -e 's/^X-L//'`
++ if test -n "$acl_shlibext"; then
++ if test -f "$dir/$libname$shrext"; then
++ found_dir="$dir"
++ found_so="$dir/$libname$shrext"
++ else
++ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
++ ver=`(cd "$dir" && \
++ for f in "$libname$shrext".*; do echo "$f"; done \
++ | sed -e "s,^$libname$shrext\\\\.,," \
++ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
++ | sed 1q ) 2>/dev/null`
++ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
++ found_dir="$dir"
++ found_so="$dir/$libname$shrext.$ver"
++ fi
++ else
++ eval library_names=\"$acl_library_names_spec\"
++ for f in $library_names; do
++ if test -f "$dir/$f"; then
++ found_dir="$dir"
++ found_so="$dir/$f"
++ break
++ fi
++ done
++ fi
++ fi
++ fi
++ if test "X$found_dir" = "X"; then
++ if test -f "$dir/$libname.$acl_libext"; then
++ found_dir="$dir"
++ found_a="$dir/$libname.$acl_libext"
++ fi
++ fi
++ if test "X$found_dir" != "X"; then
++ if test -f "$dir/$libname.la"; then
++ found_la="$dir/$libname.la"
++ fi
++ fi
++ ;;
++ esac
++ if test "X$found_dir" != "X"; then
++ break
++ fi
++ done
++ fi
++ if test "X$found_dir" != "X"; then
++ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
++ if test "X$found_so" != "X"; then
++ if test "$enable_rpath" = no \
++ || test "X$found_dir" = "X/usr/$acl_libdirstem" \
++ || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
++ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
++ else
++ haveit=
++ for x in $ltrpathdirs; do
++ if test "X$x" = "X$found_dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ ltrpathdirs="$ltrpathdirs $found_dir"
++ fi
++ if test "$acl_hardcode_direct" = yes; then
++ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
++ else
++ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
++ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
++ haveit=
++ for x in $rpathdirs; do
++ if test "X$x" = "X$found_dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ rpathdirs="$rpathdirs $found_dir"
++ fi
++ else
++ haveit=
++ for x in $LDFLAGS $LIBINTL; do
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++ eval x=\"$x\"
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++ if test "X$x" = "X-L$found_dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
++ fi
++ if test "$acl_hardcode_minus_L" != no; then
++ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
++ else
++ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
++ fi
++ fi
++ fi
++ fi
++ else
++ if test "X$found_a" != "X"; then
++ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
++ else
++ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
++ fi
++ fi
++ additional_includedir=
++ case "$found_dir" in
++ */$acl_libdirstem | */$acl_libdirstem/)
++ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
++ if test "$name" = 'intl'; then
++ LIBINTL_PREFIX="$basedir"
++ fi
++ additional_includedir="$basedir/include"
++ ;;
++ */$acl_libdirstem2 | */$acl_libdirstem2/)
++ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
++ if test "$name" = 'intl'; then
++ LIBINTL_PREFIX="$basedir"
++ fi
++ additional_includedir="$basedir/include"
++ ;;
++ esac
++ if test "X$additional_includedir" != "X"; then
++ if test "X$additional_includedir" != "X/usr/include"; then
++ haveit=
++ if test "X$additional_includedir" = "X/usr/local/include"; then
++ if test -n "$GCC"; then
++ case $host_os in
++ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
++ esac
++ fi
++ fi
++ if test -z "$haveit"; then
++ for x in $CPPFLAGS $INCINTL; do
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++ eval x=\"$x\"
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++ if test "X$x" = "X-I$additional_includedir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ if test -d "$additional_includedir"; then
++ INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
++ fi
++ fi
++ fi
++ fi
++ fi
++ if test -n "$found_la"; then
++ save_libdir="$libdir"
++ case "$found_la" in
++ */* | *\\*) . "$found_la" ;;
++ *) . "./$found_la" ;;
++ esac
++ libdir="$save_libdir"
++ for dep in $dependency_libs; do
++ case "$dep" in
++ -L*)
++ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
++ if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
++ && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
++ haveit=
++ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
++ || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
++ if test -n "$GCC"; then
++ case $host_os in
++ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
++ esac
++ fi
++ fi
++ if test -z "$haveit"; then
++ haveit=
++ for x in $LDFLAGS $LIBINTL; do
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++ eval x=\"$x\"
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++ if test "X$x" = "X-L$additional_libdir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ if test -d "$additional_libdir"; then
++ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
++ fi
++ fi
++ haveit=
++ for x in $LDFLAGS $LTLIBINTL; do
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++ eval x=\"$x\"
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++ if test "X$x" = "X-L$additional_libdir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ if test -d "$additional_libdir"; then
++ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
++ fi
++ fi
++ fi
++ fi
++ ;;
++ -R*)
++ dir=`echo "X$dep" | sed -e 's/^X-R//'`
++ if test "$enable_rpath" != no; then
++ haveit=
++ for x in $rpathdirs; do
++ if test "X$x" = "X$dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ rpathdirs="$rpathdirs $dir"
++ fi
++ haveit=
++ for x in $ltrpathdirs; do
++ if test "X$x" = "X$dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ ltrpathdirs="$ltrpathdirs $dir"
++ fi
++ fi
++ ;;
++ -l*)
++ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
++ ;;
++ *.la)
++ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
++ ;;
++ *)
++ LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
++ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
++ ;;
++ esac
++ done
++ fi
++ else
++ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
++ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
++ fi
++ fi
+ fi
++ done
++ done
++ if test "X$rpathdirs" != "X"; then
++ if test -n "$acl_hardcode_libdir_separator"; then
++ alldirs=
++ for found_dir in $rpathdirs; do
++ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
++ done
++ acl_save_libdir="$libdir"
++ libdir="$alldirs"
++ eval flag=\"$acl_hardcode_libdir_flag_spec\"
++ libdir="$acl_save_libdir"
++ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
++ else
++ for found_dir in $rpathdirs; do
++ acl_save_libdir="$libdir"
++ libdir="$found_dir"
++ eval flag=\"$acl_hardcode_libdir_flag_spec\"
++ libdir="$acl_save_libdir"
++ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
++ done
++ fi
++ fi
++ if test "X$ltrpathdirs" != "X"; then
++ for found_dir in $ltrpathdirs; do
++ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
++ done
++ fi
+
+- if test "$XGETTEXT" != ":"; then
+- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+- : ;
+- else
+- echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6
+- XGETTEXT=":"
+- fi
++
++
++
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5
++$as_echo_n "checking for GNU gettext in libintl... " >&6; }
++if eval \${$gt_func_gnugettext_libintl+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ gt_save_CPPFLAGS="$CPPFLAGS"
++ CPPFLAGS="$CPPFLAGS $INCINTL"
++ gt_save_LIBS="$LIBS"
++ LIBS="$LIBS $LIBINTL"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++#include <libintl.h>
++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
++extern int _nl_msg_cat_cntr;
++extern
++#ifdef __cplusplus
++"C"
++#endif
++const char *_nl_expand_alias (const char *);
++#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias (""))
++#else
++#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
++#endif
++$gt_revision_test_code
++
++int
++main ()
++{
++
++bindtextdomain ("", "");
++return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ eval "$gt_func_gnugettext_libintl=yes"
++else
++ eval "$gt_func_gnugettext_libintl=no"
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
++ LIBS="$LIBS $LIBICONV"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++#include <libintl.h>
++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
++extern int _nl_msg_cat_cntr;
++extern
++#ifdef __cplusplus
++"C"
++#endif
++const char *_nl_expand_alias (const char *);
++#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias (""))
++#else
++#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
++#endif
++$gt_revision_test_code
++
++int
++main ()
++{
++
++bindtextdomain ("", "");
++return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ LIBINTL="$LIBINTL $LIBICONV"
++ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
++ eval "$gt_func_gnugettext_libintl=yes"
++
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ fi
++ CPPFLAGS="$gt_save_CPPFLAGS"
++ LIBS="$gt_save_LIBS"
++fi
++eval ac_res=\$$gt_func_gnugettext_libintl
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++ fi
++
++ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
++ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
++ && test "$PACKAGE" != gettext-runtime \
++ && test "$PACKAGE" != gettext-tools; }; then
++ gt_use_preinstalled_gnugettext=yes
++ else
++ LIBINTL=
++ LTLIBINTL=
++ INCINTL=
++ fi
++
++
++
++ if test -n "$INTL_MACOSX_LIBS"; then
++ if test "$gt_use_preinstalled_gnugettext" = "yes" \
++ || test "$nls_cv_use_gnu_gettext" = "yes"; then
++ LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
++ LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+ fi
++ fi
++
++ if test "$gt_use_preinstalled_gnugettext" = "yes" \
++ || test "$nls_cv_use_gnu_gettext" = "yes"; then
++
++$as_echo "#define ENABLE_NLS 1" >>confdefs.h
+
+- # We need to process the po/ directory.
+- POSUB=po
+ else
+- DATADIRNAME=share
+- nls_cv_header_intl=intl/libintl.h
+- nls_cv_header_libgt=intl/libgettext.h
++ USE_NLS=no
+ fi
++ fi
+
+- # If this is used in GNU gettext we have to set USE_NLS to `yes'
+- # because some of the sources are only built for this goal.
+- if test "$PACKAGE" = gettext; then
+- USE_NLS=yes
+- USE_INCLUDED_LIBINTL=yes
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5
++$as_echo_n "checking whether to use NLS... " >&6; }
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
++$as_echo "$USE_NLS" >&6; }
++ if test "$USE_NLS" = "yes"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5
++$as_echo_n "checking where the gettext function comes from... " >&6; }
++ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
++ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
++ gt_source="external libintl"
++ else
++ gt_source="libc"
++ fi
++ else
++ gt_source="included intl directory"
+ fi
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5
++$as_echo "$gt_source" >&6; }
++ fi
++
++ if test "$USE_NLS" = "yes"; then
+
+- for lang in $ALL_LINGUAS; do
+- GMOFILES="$GMOFILES $lang.gmo"
+- POFILES="$POFILES $lang.po"
++ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
++ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5
++$as_echo_n "checking how to link with libintl... " >&6; }
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5
++$as_echo "$LIBINTL" >&6; }
++
++ for element in $INCINTL; do
++ haveit=
++ for x in $CPPFLAGS; do
++
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++ eval x=\"$x\"
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++
++ if test "X$x" = "X$element"; then
++ haveit=yes
++ break
++ fi
+ done
++ if test -z "$haveit"; then
++ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
++ fi
++ done
+
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+- if test "x$CATOBJEXT" != "x"; then
+- if test "x$ALL_LINGUAS" = "x"; then
+- LINGUAS=
+- else
+- echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
+-echo "configure:4593: checking for catalogs to be installed" >&5
+- NEW_LINGUAS=
+- for lang in ${LINGUAS=$ALL_LINGUAS}; do
+- case "$ALL_LINGUAS" in
+- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+- esac
+- done
+- LINGUAS=$NEW_LINGUAS
+- echo "$ac_t""$LINGUAS" 1>&6
+- fi
++ fi
+
+- if test -n "$LINGUAS"; then
+- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+- fi
+- fi
+
+- if test $ac_cv_header_locale_h = yes; then
+- INCLUDE_LOCALE_H="#include <locale.h>"
+- else
+- INCLUDE_LOCALE_H="\
+-/* The system does not provide the header <locale.h>. Take care yourself. */"
+- fi
+-
++$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h
+
+- test -d intl || mkdir intl
+- if test "$CATOBJEXT" = ".cat"; then
+- ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
+-echo "configure:4621: checking for linux/version.h" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 4626 "configure"
+-#include "confdefs.h"
+-#include <linux/version.h>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:4631: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
+-else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
+-fi
+-rm -f conftest*
+-fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- msgformat=linux
+-else
+- echo "$ac_t""no" 1>&6
+-msgformat=xopen
+-fi
+
++$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h
+
+- sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
+- fi
+- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+- $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
++ fi
+
+- if test "$PACKAGE" = "gettext"; then
+- GT_NO="#NO#"
+- GT_YES=
+- else
+- GT_NO=
+- GT_YES="#YES#"
+- fi
+-
+-
++ POSUB=po
++ fi
+
+- MKINSTALLDIRS=
+- if test -n "$ac_aux_dir"; then
+- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
+- fi
+- if test -z "$MKINSTALLDIRS"; then
+- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+- fi
+-
+
+- l=
+-
+
+- test -d po || mkdir po
+- if test "x$srcdir" != "x."; then
+- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+- posrcprefix="$srcdir/"
+- else
+- posrcprefix="../$srcdir/"
+- fi
+- else
+- posrcprefix="../"
+- fi
+- rm -f po/POTFILES
+- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+- < $srcdir/po/POTFILES.in > po/POTFILES
+-
++ INTLLIBS="$LIBINTL"
++
++
+
+-cat >> confdefs.h <<EOF
+-#define LOCALEDIR "$prefix/$DATADIRNAME"
+-EOF
+
+
+
+-trap '' 1 2 15
+-cat > confcache <<\EOF
++
++ac_config_files="$ac_config_files Makefile lib/Makefile testsuite/Makefile man/Makefile po/Makefile.in src/Makefile debian/rules Specfile systype src/lrzszbug"
++
++ac_config_commands="$ac_config_commands default"
++
++cat >confcache <<\_ACEOF
+ # This file is a shell script that caches the results of configure
+ # tests run on this system so they can be shared between configure
+-# scripts and configure runs. It is not useful on other systems.
+-# If it contains results you don't want to keep, you may remove or edit it.
++# scripts and configure runs, see configure's option --config-cache.
++# It is not useful on other systems. If it contains results you don't
++# want to keep, you may remove or edit it.
+ #
+-# By default, configure uses ./config.cache as the cache file,
+-# creating it if it does not exist already. You can give configure
+-# the --cache-file=FILE option to use a different cache file; that is
+-# what configure does when it calls configure scripts in
+-# subdirectories, so they share the cache.
+-# Giving --cache-file=/dev/null disables caching, for debugging configure.
+-# config.status only pays attention to the cache file if you give it the
+-# --recheck option to rerun configure.
++# config.status only pays attention to the cache file if you give it
++# the --recheck option to rerun configure.
+ #
+-EOF
++# `ac_cv_env_foo' variables (set or unset) will be overridden when
++# loading this file, other *unset* `ac_cv_foo' will be assigned the
++# following values.
++
++_ACEOF
++
+ # The following way of writing the cache mishandles newlines in values,
+ # but we know of no workaround that is simple, portable, and efficient.
+-# So, don't put newlines in cache variables' values.
++# So, we kill variables containing newlines.
+ # Ultrix sh set writes to stderr and can't be redirected directly,
+ # and sets the high bit in the cache file unless we assign to the vars.
+-(set) 2>&1 |
+- case `(ac_space=' '; set) 2>&1` in
+- *ac_space=\ *)
+- # `set' does not quote correctly, so add quotes (double-quote substitution
+- # turns \\\\ into \\, and sed turns \\ into \).
+- sed -n \
+- -e "s/'/'\\\\''/g" \
+- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+- ;;
+- *)
+- # `set' quotes correctly as required by POSIX, so do not add quotes.
+- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+- ;;
+- esac >> confcache
+-if cmp -s $cache_file confcache; then
+- :
+-else
+- if test -w $cache_file; then
+- echo "updating cache $cache_file"
+- cat confcache > $cache_file
++(
++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
++ eval ac_val=\$$ac_var
++ case $ac_val in #(
++ *${as_nl}*)
++ case $ac_var in #(
++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
++ esac
++ case $ac_var in #(
++ _ | IFS | as_nl) ;; #(
++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
++ *) { eval $ac_var=; unset $ac_var;} ;;
++ esac ;;
++ esac
++ done
++
++ (set) 2>&1 |
++ case $as_nl`(ac_space=' '; set) 2>&1` in #(
++ *${as_nl}ac_space=\ *)
++ # `set' does not quote correctly, so add quotes: double-quote
++ # substitution turns \\\\ into \\, and sed turns \\ into \.
++ sed -n \
++ "s/'/'\\\\''/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
++ ;; #(
++ *)
++ # `set' quotes correctly as required by POSIX, so do not add quotes.
++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
++ ;;
++ esac |
++ sort
++) |
++ sed '
++ /^ac_cv_env_/b end
++ t clear
++ :clear
++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
++ t end
++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
++ :end' >>confcache
++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
++ if test -w "$cache_file"; then
++ if test "x$cache_file" != "x/dev/null"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
++$as_echo "$as_me: updating cache $cache_file" >&6;}
++ if test ! -f "$cache_file" || test -h "$cache_file"; then
++ cat confcache >"$cache_file"
++ else
++ case $cache_file in #(
++ */* | ?:*)
++ mv -f confcache "$cache_file"$$ &&
++ mv -f "$cache_file"$$ "$cache_file" ;; #(
++ *)
++ mv -f confcache "$cache_file" ;;
++ esac
++ fi
++ fi
+ else
+- echo "not updating unwritable cache $cache_file"
++ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
++$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+ fi
+ rm -f confcache
+
+-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+-
+ test "x$prefix" = xNONE && prefix=$ac_default_prefix
+ # Let make expand exec_prefix.
+ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+-# Any assignment to VPATH causes Sun make to only execute
+-# the first set of double-colon rules, so remove it if not needed.
+-# If there is a colon in the path, we need to keep it.
+-if test "x$srcdir" = x.; then
+- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
+-fi
++DEFS=-DHAVE_CONFIG_H
+
+-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
++ac_libobjs=
++ac_ltlibobjs=
++for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
++ # 1. Remove the extension, and $U if already installed.
++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
++ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
++ # will be set to the directory where LIBOBJS objects are built.
++ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
++ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
++done
++LIBOBJS=$ac_libobjs
+
+-DEFS=-DHAVE_CONFIG_H
++LTLIBOBJS=$ac_ltlibobjs
+
+-# Without the "./", some shells look in PATH for config.status.
+-: ${CONFIG_STATUS=./config.status}
+
+-echo creating $CONFIG_STATUS
+-rm -f $CONFIG_STATUS
+-cat > $CONFIG_STATUS <<EOF
+-#! /bin/sh
+-# Generated automatically by configure.
++ if test -n "$EXEEXT"; then
++ am__EXEEXT_TRUE=
++ am__EXEEXT_FALSE='#'
++else
++ am__EXEEXT_TRUE='#'
++ am__EXEEXT_FALSE=
++fi
++
++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
++ as_fn_error $? "conditional \"AMDEP\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
++fi
++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
++ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
++fi
++
++: "${CONFIG_STATUS=./config.status}"
++ac_write_fail=0
++ac_clean_files_save=$ac_clean_files
++ac_clean_files="$ac_clean_files $CONFIG_STATUS"
++{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
++$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
++as_write_fail=0
++cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
++#! $SHELL
++# Generated by $as_me.
+ # Run this file to recreate the current configuration.
+-# This directory was configured as follows,
+-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+-#
+-# $0 $ac_configure_args
+-#
+ # Compiler output produced by configure, useful for debugging
+-# configure, is in ./config.log if it exists.
++# configure, is in config.log if it exists.
+
+-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+-for ac_option
++debug=false
++ac_cs_recheck=false
++ac_cs_silent=false
++
++SHELL=\${CONFIG_SHELL-$SHELL}
++export SHELL
++_ASEOF
++cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
++## -------------------- ##
++## M4sh Initialization. ##
++## -------------------- ##
++
++# Be more Bourne compatible
++DUALCASE=1; export DUALCASE # for MKS sh
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
++ emulate sh
++ NULLCMD=:
++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
++ setopt NO_GLOB_SUBST
++else
++ case `(set -o) 2>/dev/null` in #(
++ *posix*) :
++ set -o posix ;; #(
++ *) :
++ ;;
++esac
++fi
++
++
++as_nl='
++'
++export as_nl
++as_echo='printf %s\n'
++as_echo_n='printf %s'
++
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ PATH_SEPARATOR=:
++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
++ PATH_SEPARATOR=';'
++ }
++fi
++
++
++# IFS
++# We need space, tab and new line, in precisely that order. Quoting is
++# there to prevent editors from complaining about space-tab.
++# (If _AS_PATH_WALK were called with IFS unset, it would disable word
++# splitting by setting IFS to empty value.)
++IFS=" "" $as_nl"
++
++# Find who we are. Look in the path if we contain no directory separator.
++as_myself=
++case $0 in #((
++ *[\\/]* ) as_myself=$0 ;;
++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
+ do
+- case "\$ac_option" in
+- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+- echo "$CONFIG_STATUS generated by autoconf version 2.12"
+- exit 0 ;;
+- -help | --help | --hel | --he | --h)
+- echo "\$ac_cs_usage"; exit 0 ;;
+- *) echo "\$ac_cs_usage"; exit 1 ;;
+- esac
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
++ done
++IFS=$as_save_IFS
++
++ ;;
++esac
++# We did not find ourselves, most probably we were run as `sh COMMAND'
++# in which case we are not to be found in the path.
++if test "x$as_myself" = x; then
++ as_myself=$0
++fi
++if test ! -f "$as_myself"; then
++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
++ exit 1
++fi
++
++# Unset variables that we do not need and which cause bugs (e.g. in
++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
++# suppresses any "Segmentation fault" message there. '((' could
++# trigger a bug in pdksh 5.2.14.
++for as_var in BASH_ENV ENV MAIL MAILPATH
++do eval test x\${$as_var+set} = xset \
++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+ done
++PS1='$ '
++PS2='> '
++PS4='+ '
+
+-ac_given_srcdir=$srcdir
+-ac_given_INSTALL="$INSTALL"
++# NLS nuisances.
++LC_ALL=C
++export LC_ALL
++LANGUAGE=C
++export LANGUAGE
++
++# CDPATH.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+-trap 'rm -fr `echo "Makefile intl/Makefile lib/Makefile testsuite/Makefile \
+-man/Makefile po/Makefile.in src/Makefile debian/rules Specfile systype \
+-src/lrzszbug config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+-EOF
+-cat >> $CONFIG_STATUS <<EOF
+-
+-# Protect against being on the right side of a sed subst in config.status.
+-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+-$ac_vpsub
+-$extrasub
+-s%@CFLAGS@%$CFLAGS%g
+-s%@CPPFLAGS@%$CPPFLAGS%g
+-s%@CXXFLAGS@%$CXXFLAGS%g
+-s%@DEFS@%$DEFS%g
+-s%@LDFLAGS@%$LDFLAGS%g
+-s%@LIBS@%$LIBS%g
+-s%@exec_prefix@%$exec_prefix%g
+-s%@prefix@%$prefix%g
+-s%@program_transform_name@%$program_transform_name%g
+-s%@bindir@%$bindir%g
+-s%@sbindir@%$sbindir%g
+-s%@libexecdir@%$libexecdir%g
+-s%@datadir@%$datadir%g
+-s%@sysconfdir@%$sysconfdir%g
+-s%@sharedstatedir@%$sharedstatedir%g
+-s%@localstatedir@%$localstatedir%g
+-s%@libdir@%$libdir%g
+-s%@includedir@%$includedir%g
+-s%@oldincludedir@%$oldincludedir%g
+-s%@infodir@%$infodir%g
+-s%@mandir@%$mandir%g
+-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+-s%@INSTALL_DATA@%$INSTALL_DATA%g
+-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+-s%@PACKAGE@%$PACKAGE%g
+-s%@VERSION@%$VERSION%g
+-s%@ACLOCAL@%$ACLOCAL%g
+-s%@AUTOCONF@%$AUTOCONF%g
+-s%@AUTOMAKE@%$AUTOMAKE%g
+-s%@AUTOHEADER@%$AUTOHEADER%g
+-s%@MAKEINFO@%$MAKEINFO%g
+-s%@SET_MAKE@%$SET_MAKE%g
+-s%@PACKAGE_VERSION@%$PACKAGE_VERSION%g
+-s%@ENABLE_TIMESYNC@%$ENABLE_TIMESYNC%g
+-s%@CC@%$CC%g
+-s%@CPP@%$CPP%g
+-s%@RANLIB@%$RANLIB%g
+-s%@U@%$U%g
+-s%@ANSI2KNR@%$ANSI2KNR%g
+-s%@ALLOCA@%$ALLOCA%g
+-s%@LIBOBJS@%$LIBOBJS%g
+-s%@USE_NLS@%$USE_NLS%g
+-s%@MSGFMT@%$MSGFMT%g
+-s%@GMSGFMT@%$GMSGFMT%g
+-s%@XGETTEXT@%$XGETTEXT%g
+-s%@GENCAT@%$GENCAT%g
+-s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g
+-s%@CATALOGS@%$CATALOGS%g
+-s%@CATOBJEXT@%$CATOBJEXT%g
+-s%@DATADIRNAME@%$DATADIRNAME%g
+-s%@GMOFILES@%$GMOFILES%g
+-s%@INSTOBJEXT@%$INSTOBJEXT%g
+-s%@INTLDEPS@%$INTLDEPS%g
+-s%@INTLLIBS@%$INTLLIBS%g
+-s%@INTLOBJS@%$INTLOBJS%g
+-s%@POFILES@%$POFILES%g
+-s%@POSUB@%$POSUB%g
+-s%@INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g
+-s%@GT_NO@%$GT_NO%g
+-s%@GT_YES@%$GT_YES%g
+-s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
+-s%@l@%$l%g
+-
+-CEOF
+-EOF
+-
+-cat >> $CONFIG_STATUS <<\EOF
+-
+-# Split the substitutions into bite-sized pieces for seds with
+-# small command number limits, like on Digital OSF/1 and HP-UX.
+-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+-ac_file=1 # Number of current file.
+-ac_beg=1 # First line for current file.
+-ac_end=$ac_max_sed_cmds # Line after last line for current file.
+-ac_more_lines=:
+-ac_sed_cmds=""
+-while $ac_more_lines; do
+- if test $ac_beg -gt 1; then
+- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+- else
+- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
++
++# as_fn_error STATUS ERROR [LINENO LOG_FD]
++# ----------------------------------------
++# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
++# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
++# script with STATUS, using 1 if that was 0.
++as_fn_error ()
++{
++ as_status=$1; test $as_status -eq 0 && as_status=1
++ if test "$4"; then
++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+- if test ! -s conftest.s$ac_file; then
+- ac_more_lines=false
+- rm -f conftest.s$ac_file
+- else
+- if test -z "$ac_sed_cmds"; then
+- ac_sed_cmds="sed -f conftest.s$ac_file"
+- else
+- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+- fi
+- ac_file=`expr $ac_file + 1`
+- ac_beg=$ac_end
+- ac_end=`expr $ac_end + $ac_max_sed_cmds`
+- fi
+-done
+-if test -z "$ac_sed_cmds"; then
+- ac_sed_cmds=cat
+-fi
+-EOF
+-
+-cat >> $CONFIG_STATUS <<EOF
+-
+-CONFIG_FILES=\${CONFIG_FILES-"Makefile intl/Makefile lib/Makefile testsuite/Makefile \
+-man/Makefile po/Makefile.in src/Makefile debian/rules Specfile systype \
+-src/lrzszbug"}
+-EOF
+-cat >> $CONFIG_STATUS <<\EOF
+-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+- case "$ac_file" in
+- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+- *) ac_file_in="${ac_file}.in" ;;
+- esac
++ $as_echo "$as_me: error: $2" >&2
++ as_fn_exit $as_status
++} # as_fn_error
++
++
++# as_fn_set_status STATUS
++# -----------------------
++# Set $? to STATUS, without forking.
++as_fn_set_status ()
++{
++ return $1
++} # as_fn_set_status
+
+- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
++# as_fn_exit STATUS
++# -----------------
++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
++as_fn_exit ()
++{
++ set +e
++ as_fn_set_status $1
++ exit $1
++} # as_fn_exit
++
++# as_fn_unset VAR
++# ---------------
++# Portably unset VAR.
++as_fn_unset ()
++{
++ { eval $1=; unset $1;}
++}
++as_unset=as_fn_unset
++# as_fn_append VAR VALUE
++# ----------------------
++# Append the text in VALUE to the end of the definition contained in VAR. Take
++# advantage of any shell optimizations that allow amortized linear growth over
++# repeated appends, instead of the typical quadratic growth present in naive
++# implementations.
++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
++ eval 'as_fn_append ()
++ {
++ eval $1+=\$2
++ }'
++else
++ as_fn_append ()
++ {
++ eval $1=\$$1\$2
++ }
++fi # as_fn_append
++
++# as_fn_arith ARG...
++# ------------------
++# Perform arithmetic evaluation on the ARGs, and store the result in the
++# global $as_val. Take advantage of shells that can avoid forks. The arguments
++# must be portable across $(()) and expr.
++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
++ eval 'as_fn_arith ()
++ {
++ as_val=$(( $* ))
++ }'
++else
++ as_fn_arith ()
++ {
++ as_val=`expr "$@" || test $? -eq 1`
++ }
++fi # as_fn_arith
++
++
++if expr a : '\(a\)' >/dev/null 2>&1 &&
++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
++ as_basename=basename
++else
++ as_basename=false
++fi
++
++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
++ as_dirname=dirname
++else
++ as_dirname=false
++fi
++
++as_me=`$as_basename -- "$0" ||
++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X/"$0" |
++ sed '/^.*\/\([^/][^/]*\)\/*$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++
++# Avoid depending upon Character Ranges.
++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
++as_cr_digits='0123456789'
++as_cr_alnum=$as_cr_Letters$as_cr_digits
++
++ECHO_C= ECHO_N= ECHO_T=
++case `echo -n x` in #(((((
++-n*)
++ case `echo 'xy\c'` in
++ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
++ xy) ECHO_C='\c';;
++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
++ ECHO_T=' ';;
++ esac;;
++*)
++ ECHO_N='-n';;
++esac
+
+- # Remove last slash and all that follows it. Not all systems have dirname.
+- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+- # The file is in a subdirectory.
+- test ! -d "$ac_dir" && mkdir "$ac_dir"
+- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+- # A "../" for each directory in $ac_dir_suffix.
+- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
++rm -f conf$$ conf$$.exe conf$$.file
++if test -d conf$$.dir; then
++ rm -f conf$$.dir/conf$$.file
++else
++ rm -f conf$$.dir
++ mkdir conf$$.dir 2>/dev/null
++fi
++if (echo >conf$$.file) 2>/dev/null; then
++ if ln -s conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s='ln -s'
++ # ... but there are two gotchas:
++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
++ # In both cases, we have to default to `cp -pR'.
++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
++ as_ln_s='cp -pR'
++ elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
+ else
+- ac_dir_suffix= ac_dots=
++ as_ln_s='cp -pR'
+ fi
++else
++ as_ln_s='cp -pR'
++fi
++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
++rmdir conf$$.dir 2>/dev/null
++
++
++# as_fn_mkdir_p
++# -------------
++# Create "$as_dir" as a directory, including parents if necessary.
++as_fn_mkdir_p ()
++{
+
+- case "$ac_given_srcdir" in
+- .) srcdir=.
+- if test -z "$ac_dots"; then top_srcdir=.
+- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+- *) # Relative path.
+- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+- top_srcdir="$ac_dots$ac_given_srcdir" ;;
++ case $as_dir in #(
++ -*) as_dir=./$as_dir;;
+ esac
++ test -d "$as_dir" || eval $as_mkdir_p || {
++ as_dirs=
++ while :; do
++ case $as_dir in #(
++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
++ *) as_qdir=$as_dir;;
++ esac
++ as_dirs="'$as_qdir' $as_dirs"
++ as_dir=`$as_dirname -- "$as_dir" ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_dir" : 'X\(//\)[^/]' \| \
++ X"$as_dir" : 'X\(//\)$' \| \
++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$as_dir" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ test -d "$as_dir" && break
++ done
++ test -z "$as_dirs" || eval "mkdir $as_dirs"
++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
++
++
++} # as_fn_mkdir_p
++if mkdir -p . 2>/dev/null; then
++ as_mkdir_p='mkdir -p "$as_dir"'
++else
++ test -d ./-p && rmdir ./-p
++ as_mkdir_p=false
++fi
++
++
++# as_fn_executable_p FILE
++# -----------------------
++# Test if FILE is an executable regular file.
++as_fn_executable_p ()
++{
++ test -f "$1" && test -x "$1"
++} # as_fn_executable_p
++as_test_x='test -x'
++as_executable_p=as_fn_executable_p
++
++# Sed expression to map a string onto a valid CPP name.
++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
++
++# Sed expression to map a string onto a valid variable name.
++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
++
++
++exec 6>&1
++## ----------------------------------- ##
++## Main body of $CONFIG_STATUS script. ##
++## ----------------------------------- ##
++_ASEOF
++test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++# Save the log message, to keep $0 and so on meaningful, and to
++# report actual input values of CONFIG_FILES etc. instead of their
++# values after options handling.
++ac_log="
++This file was extended by $as_me, which was
++generated by GNU Autoconf 2.69. Invocation command line was
++
++ CONFIG_FILES = $CONFIG_FILES
++ CONFIG_HEADERS = $CONFIG_HEADERS
++ CONFIG_LINKS = $CONFIG_LINKS
++ CONFIG_COMMANDS = $CONFIG_COMMANDS
++ $ $0 $@
+
+- case "$ac_given_INSTALL" in
+- [/$]*) INSTALL="$ac_given_INSTALL" ;;
+- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
++on `(hostname || uname -n) 2>/dev/null | sed 1q`
++"
++
++_ACEOF
++
++case $ac_config_files in *"
++"*) set x $ac_config_files; shift; ac_config_files=$*;;
++esac
++
++case $ac_config_headers in *"
++"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
++esac
++
++
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++# Files that config.status was made for.
++config_files="$ac_config_files"
++config_headers="$ac_config_headers"
++config_commands="$ac_config_commands"
++
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++ac_cs_usage="\
++\`$as_me' instantiates files and other configuration actions
++from templates according to the current configuration. Unless the files
++and actions are specified as TAGs, all are instantiated by default.
++
++Usage: $0 [OPTION]... [TAG]...
++
++ -h, --help print this help, then exit
++ -V, --version print version number and configuration settings, then exit
++ --config print configuration, then exit
++ -q, --quiet, --silent
++ do not print progress messages
++ -d, --debug don't remove temporary files
++ --recheck update $as_me by reconfiguring in the same conditions
++ --file=FILE[:TEMPLATE]
++ instantiate the configuration file FILE
++ --header=FILE[:TEMPLATE]
++ instantiate the configuration header FILE
++
++Configuration files:
++$config_files
++
++Configuration headers:
++$config_headers
++
++Configuration commands:
++$config_commands
++
++Report bugs to the package provider."
++
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
++ac_cs_version="\\
++config.status
++configured by $0, generated by GNU Autoconf 2.69,
++ with options \\"\$ac_cs_config\\"
++
++Copyright (C) 2012 Free Software Foundation, Inc.
++This config.status script is free software; the Free Software Foundation
++gives unlimited permission to copy, distribute and modify it."
++
++ac_pwd='$ac_pwd'
++srcdir='$srcdir'
++INSTALL='$INSTALL'
++MKDIR_P='$MKDIR_P'
++AWK='$AWK'
++test -n "\$AWK" || AWK=awk
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++# The default lists apply if the user does not specify any file.
++ac_need_defaults=:
++while test $# != 0
++do
++ case $1 in
++ --*=?*)
++ ac_option=`expr "X$1" : 'X\([^=]*\)='`
++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
++ ac_shift=:
++ ;;
++ --*=)
++ ac_option=`expr "X$1" : 'X\([^=]*\)='`
++ ac_optarg=
++ ac_shift=:
++ ;;
++ *)
++ ac_option=$1
++ ac_optarg=$2
++ ac_shift=shift
++ ;;
+ esac
+
+- echo creating "$ac_file"
+- rm -f "$ac_file"
+- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+- case "$ac_file" in
+- *Makefile*) ac_comsub="1i\\
+-# $configure_input" ;;
+- *) ac_comsub= ;;
++ case $ac_option in
++ # Handling of the options.
++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
++ ac_cs_recheck=: ;;
++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
++ $as_echo "$ac_cs_version"; exit ;;
++ --config | --confi | --conf | --con | --co | --c )
++ $as_echo "$ac_cs_config"; exit ;;
++ --debug | --debu | --deb | --de | --d | -d )
++ debug=: ;;
++ --file | --fil | --fi | --f )
++ $ac_shift
++ case $ac_optarg in
++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ '') as_fn_error $? "missing file argument" ;;
++ esac
++ as_fn_append CONFIG_FILES " '$ac_optarg'"
++ ac_need_defaults=false;;
++ --header | --heade | --head | --hea )
++ $ac_shift
++ case $ac_optarg in
++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ esac
++ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
++ ac_need_defaults=false;;
++ --he | --h)
++ # Conflict between --help and --header
++ as_fn_error $? "ambiguous option: \`$1'
++Try \`$0 --help' for more information.";;
++ --help | --hel | -h )
++ $as_echo "$ac_cs_usage"; exit ;;
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil | --si | --s)
++ ac_cs_silent=: ;;
++
++ # This is an error.
++ -*) as_fn_error $? "unrecognized option: \`$1'
++Try \`$0 --help' for more information." ;;
++
++ *) as_fn_append ac_config_targets " $1"
++ ac_need_defaults=false ;;
++
+ esac
++ shift
++done
+
+- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+- sed -e "$ac_comsub
+-s%@configure_input@%$configure_input%g
+-s%@srcdir@%$srcdir%g
+-s%@top_srcdir@%$top_srcdir%g
+-s%@INSTALL@%$INSTALL%g
+-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+-fi; done
+-rm -f conftest.s*
++ac_configure_extra_args=
+
+-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+-# NAME is the cpp macro being defined and VALUE is the value it is being given.
++if $ac_cs_silent; then
++ exec 6>/dev/null
++ ac_configure_extra_args="$ac_configure_extra_args --silent"
++fi
++
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++if \$ac_cs_recheck; then
++ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
++ shift
++ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
++ CONFIG_SHELL='$SHELL'
++ export CONFIG_SHELL
++ exec "\$@"
++fi
++
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++exec 5>>config.log
++{
++ echo
++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
++## Running $as_me. ##
++_ASBOX
++ $as_echo "$ac_log"
++} >&5
++
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ #
+-# ac_d sets the value in "#define NAME VALUE" lines.
+-ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
+-ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
+-ac_dC='\3'
+-ac_dD='%g'
+-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
+-ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+-ac_uB='\([ ]\)%\1#\2define\3'
+-ac_uC=' '
+-ac_uD='\4%g'
+-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+-ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+-ac_eB='$%\1#\2define\3'
+-ac_eC=' '
+-ac_eD='%g'
+-
+-if test "${CONFIG_HEADERS+set}" != set; then
+-EOF
+-cat >> $CONFIG_STATUS <<EOF
+- CONFIG_HEADERS="config.h"
+-EOF
+-cat >> $CONFIG_STATUS <<\EOF
+-fi
+-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
+- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+- case "$ac_file" in
+- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+- *) ac_file_in="${ac_file}.in" ;;
+- esac
++# INIT-COMMANDS
++#
++AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"
++# Capture the value of obsolete ALL_LINGUAS because we need it to compute
++ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS.
++ OBSOLETE_ALL_LINGUAS="$ALL_LINGUAS"
++ # Capture the value of LINGUAS because we need it to compute CATALOGS.
++ LINGUAS="${LINGUAS-%UNSET%}"
+
+- echo creating $ac_file
+
+- rm -f conftest.frag conftest.in conftest.out
+- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+- cat $ac_file_inputs > conftest.in
+-
+-EOF
+-
+-# Transform confdefs.h into a sed script conftest.vals that substitutes
+-# the proper values into config.h.in to produce config.h. And first:
+-# Protect against being on the right side of a sed subst in config.status.
+-# Protect against being in an unquoted here document in config.status.
+-rm -f conftest.vals
+-cat > conftest.hdr <<\EOF
+-s/[\\&%]/\\&/g
+-s%[\\$`]%\\&%g
+-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+-s%ac_d%ac_u%gp
+-s%ac_u%ac_e%gp
+-EOF
+-sed -n -f conftest.hdr confdefs.h > conftest.vals
+-rm -f conftest.hdr
+-
+-# This sed command replaces #undef with comments. This is necessary, for
+-# example, in the case of _POSIX_SOURCE, which is predefined and required
+-# on some systems where configure will not decide to define it.
+-cat >> conftest.vals <<\EOF
+-s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
+-EOF
++_ACEOF
+
+-# Break up conftest.vals because some shells have a limit on
+-# the size of here documents, and old seds have small limits too.
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+-rm -f conftest.tail
+-while :
++# Handling of arguments.
++for ac_config_target in $ac_config_targets
+ do
+- ac_lines=`grep -c . conftest.vals`
+- # grep -c gives empty output for an empty file on some AIX systems.
+- if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
+- # Write a limited-size here document to conftest.frag.
+- echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
+- sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
+- echo 'CEOF
+- sed -f conftest.frag conftest.in > conftest.out
+- rm -f conftest.in
+- mv conftest.out conftest.in
+-' >> $CONFIG_STATUS
+- sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
+- rm -f conftest.vals
+- mv conftest.tail conftest.vals
+-done
+-rm -f conftest.vals
+-
+-cat >> $CONFIG_STATUS <<\EOF
+- rm -f conftest.frag conftest.h
+- echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
+- cat conftest.in >> conftest.h
+- rm -f conftest.in
+- if cmp -s $ac_file conftest.h 2>/dev/null; then
+- echo "$ac_file is unchanged"
+- rm -f conftest.h
++ case $ac_config_target in
++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
++ "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
++ "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
++ "testsuite/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/Makefile" ;;
++ "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
++ "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
++ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
++ "debian/rules") CONFIG_FILES="$CONFIG_FILES debian/rules" ;;
++ "Specfile") CONFIG_FILES="$CONFIG_FILES Specfile" ;;
++ "systype") CONFIG_FILES="$CONFIG_FILES systype" ;;
++ "src/lrzszbug") CONFIG_FILES="$CONFIG_FILES src/lrzszbug" ;;
++ "default") CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
++
++ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
++ esac
++done
++
++
++# If the user did not use the arguments to specify the items to instantiate,
++# then the envvar interface is used. Set only those that are not.
++# We use the long form for the default assignment because of an extremely
++# bizarre bug on SunOS 4.1.3.
++if $ac_need_defaults; then
++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
++ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
++fi
++
++# Have a temporary directory for convenience. Make it in the build tree
++# simply because there is no reason against having it here, and in addition,
++# creating and moving files from /tmp can sometimes cause problems.
++# Hook for its removal unless debugging.
++# Note that there is a small window in which the directory will not be cleaned:
++# after its creation but before its name has been assigned to `$tmp'.
++$debug ||
++{
++ tmp= ac_tmp=
++ trap 'exit_status=$?
++ : "${ac_tmp:=$tmp}"
++ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
++' 0
++ trap 'as_fn_exit 1' 1 2 13 15
++}
++# Create a (secure) tmp directory for tmp files.
++
++{
++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
++ test -d "$tmp"
++} ||
++{
++ tmp=./conf$$-$RANDOM
++ (umask 077 && mkdir "$tmp")
++} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
++ac_tmp=$tmp
++
++# Set up the scripts for CONFIG_FILES section.
++# No need to generate them if there are no CONFIG_FILES.
++# This happens for instance with `./config.status config.h'.
++if test -n "$CONFIG_FILES"; then
++
++
++ac_cr=`echo X | tr X '\015'`
++# On cygwin, bash can eat \r inside `` if the user requested igncr.
++# But we know of no other shell where ac_cr would be empty at this
++# point, so we can use a bashism as a fallback.
++if test "x$ac_cr" = x; then
++ eval ac_cr=\$\'\\r\'
++fi
++ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
++if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
++ ac_cs_awk_cr='\\r'
++else
++ ac_cs_awk_cr=$ac_cr
++fi
++
++echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
++_ACEOF
++
++
++{
++ echo "cat >conf$$subs.awk <<_ACEOF" &&
++ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
++ echo "_ACEOF"
++} >conf$$subs.sh ||
++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
++ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
++ac_delim='%!_!# '
++for ac_last_try in false false false false false :; do
++ . ./conf$$subs.sh ||
++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
++
++ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
++ if test $ac_delim_n = $ac_delim_num; then
++ break
++ elif $ac_last_try; then
++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+- # Remove last slash and all that follows it. Not all systems have dirname.
+- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+- # The file is in a subdirectory.
+- test ! -d "$ac_dir" && mkdir "$ac_dir"
+- fi
+- rm -f $ac_file
+- mv conftest.h $ac_file
++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+-fi; done
++done
++rm -f conf$$subs.sh
+
+-EOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
++_ACEOF
++sed -n '
++h
++s/^/S["/; s/!.*/"]=/
++p
++g
++s/^[^!]*!//
++:repl
++t repl
++s/'"$ac_delim"'$//
++t delim
++:nl
++h
++s/\(.\{148\}\)..*/\1/
++t more1
++s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
++p
++n
++b repl
++:more1
++s/["\\]/\\&/g; s/^/"/; s/$/"\\/
++p
++g
++s/.\{148\}//
++t nl
++:delim
++h
++s/\(.\{148\}\)..*/\1/
++t more2
++s/["\\]/\\&/g; s/^/"/; s/$/"/
++p
++b
++:more2
++s/["\\]/\\&/g; s/^/"/; s/$/"\\/
++p
++g
++s/.\{148\}//
++t delim
++' <conf$$subs.awk | sed '
++/^[^""]/{
++ N
++ s/\n//
++}
++' >>$CONFIG_STATUS || ac_write_fail=1
++rm -f conf$$subs.awk
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++_ACAWK
++cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
++ for (key in S) S_is_set[key] = 1
++ FS = "\a"
+
+-cat >> $CONFIG_STATUS <<EOF
+-ac_sources="$nls_cv_header_libgt"
+-ac_dests="$nls_cv_header_intl"
+-EOF
+-
+-cat >> $CONFIG_STATUS <<\EOF
+-srcdir=$ac_given_srcdir
+-while test -n "$ac_sources"; do
+- set $ac_dests; ac_dest=$1; shift; ac_dests=$*
+- set $ac_sources; ac_source=$1; shift; ac_sources=$*
+-
+- echo "linking $srcdir/$ac_source to $ac_dest"
+-
+- if test ! -r $srcdir/$ac_source; then
+- { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
+- fi
+- rm -f $ac_dest
+-
+- # Make relative symlinks.
+- # Remove last slash and all that follows it. Not all systems have dirname.
+- ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
+- if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
+- # The dest file is in a subdirectory.
+- test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
+- ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
+- # A "../" for each directory in $ac_dest_dir_suffix.
+- ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
++}
++{
++ line = $ 0
++ nfields = split(line, field, "@")
++ substed = 0
++ len = length(field[1])
++ for (i = 2; i < nfields; i++) {
++ key = field[i]
++ keylen = length(key)
++ if (S_is_set[key]) {
++ value = S[key]
++ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
++ len += length(value) + length(field[++i])
++ substed = 1
++ } else
++ len += 1 + keylen
++ }
++
++ print line
++}
++
++_ACAWK
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
++ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
++else
++ cat
++fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
++ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
++_ACEOF
++
++# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
++# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
++# trailing colons and then remove the whole line if VPATH becomes empty
++# (actually we leave an empty line to preserve line numbers).
++if test "x$srcdir" = x.; then
++ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
++h
++s///
++s/^/:/
++s/[ ]*$/:/
++s/:\$(srcdir):/:/g
++s/:\${srcdir}:/:/g
++s/:@srcdir@:/:/g
++s/^:*//
++s/:*$//
++x
++s/\(=[ ]*\).*/\1/
++G
++s/\n//
++s/^[^=]*=[ ]*$//
++}'
++fi
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++fi # test -n "$CONFIG_FILES"
++
++# Set up the scripts for CONFIG_HEADERS section.
++# No need to generate them if there are no CONFIG_HEADERS.
++# This happens for instance with `./config.status Makefile'.
++if test -n "$CONFIG_HEADERS"; then
++cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
++BEGIN {
++_ACEOF
++
++# Transform confdefs.h into an awk script `defines.awk', embedded as
++# here-document in config.status, that substitutes the proper values into
++# config.h.in to produce config.h.
++
++# Create a delimiter string that does not exist in confdefs.h, to ease
++# handling of long lines.
++ac_delim='%!_!# '
++for ac_last_try in false false :; do
++ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
++ if test -z "$ac_tt"; then
++ break
++ elif $ac_last_try; then
++ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+- ac_dest_dir_suffix= ac_dots=
++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
++done
++
++# For the awk script, D is an array of macro values keyed by name,
++# likewise P contains macro parameters if any. Preserve backslash
++# newline sequences.
++
++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
++sed -n '
++s/.\{148\}/&'"$ac_delim"'/g
++t rset
++:rset
++s/^[ ]*#[ ]*define[ ][ ]*/ /
++t def
++d
++:def
++s/\\$//
++t bsnl
++s/["\\]/\\&/g
++s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
++D["\1"]=" \3"/p
++s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
++d
++:bsnl
++s/["\\]/\\&/g
++s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
++D["\1"]=" \3\\\\\\n"\\/p
++t cont
++s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
++t cont
++d
++:cont
++n
++s/.\{148\}/&'"$ac_delim"'/g
++t clear
++:clear
++s/\\$//
++t bsnlc
++s/["\\]/\\&/g; s/^/"/; s/$/"/p
++d
++:bsnlc
++s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
++b cont
++' <confdefs.h | sed '
++s/'"$ac_delim"'/"\\\
++"/g' >>$CONFIG_STATUS || ac_write_fail=1
++
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++ for (key in D) D_is_set[key] = 1
++ FS = "\a"
++}
++/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
++ line = \$ 0
++ split(line, arg, " ")
++ if (arg[1] == "#") {
++ defundef = arg[2]
++ mac1 = arg[3]
++ } else {
++ defundef = substr(arg[1], 2)
++ mac1 = arg[2]
++ }
++ split(mac1, mac2, "(") #)
++ macro = mac2[1]
++ prefix = substr(line, 1, index(line, defundef) - 1)
++ if (D_is_set[macro]) {
++ # Preserve the white space surrounding the "#".
++ print prefix "define", macro P[macro] D[macro]
++ next
++ } else {
++ # Replace #undef with comments. This is necessary, for example,
++ # in the case of _POSIX_SOURCE, which is predefined and required
++ # on some systems where configure will not decide to define it.
++ if (defundef == "undef") {
++ print "/*", prefix defundef, macro, "*/"
++ next
++ }
++ }
++}
++{ print }
++_ACAWK
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
++fi # test -n "$CONFIG_HEADERS"
++
++
++eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
++shift
++for ac_tag
++do
++ case $ac_tag in
++ :[FHLC]) ac_mode=$ac_tag; continue;;
++ esac
++ case $ac_mode$ac_tag in
++ :[FHL]*:*);;
++ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
++ :[FH]-) ac_tag=-:-;;
++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
++ esac
++ ac_save_IFS=$IFS
++ IFS=:
++ set x $ac_tag
++ IFS=$ac_save_IFS
++ shift
++ ac_file=$1
++ shift
++
++ case $ac_mode in
++ :L) ac_source=$1;;
++ :[FH])
++ ac_file_inputs=
++ for ac_f
++ do
++ case $ac_f in
++ -) ac_f="$ac_tmp/stdin";;
++ *) # Look for the file first in the build tree, then in the source tree
++ # (if the path is not absolute). The absolute path cannot be DOS-style,
++ # because $ac_f cannot contain `:'.
++ test -f "$ac_f" ||
++ case $ac_f in
++ [\\/$]*) false;;
++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
++ esac ||
++ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
++ esac
++ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
++ as_fn_append ac_file_inputs " '$ac_f'"
++ done
++
++ # Let's still pretend it is `configure' which instantiates (i.e., don't
++ # use $as_me), people would be surprised to read:
++ # /* config.h. Generated by config.status. */
++ configure_input='Generated from '`
++ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
++ `' by configure.'
++ if test x"$ac_file" != x-; then
++ configure_input="$ac_file. $configure_input"
++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
++$as_echo "$as_me: creating $ac_file" >&6;}
++ fi
++ # Neutralize special characters interpreted by sed in replacement strings.
++ case $configure_input in #(
++ *\&* | *\|* | *\\* )
++ ac_sed_conf_input=`$as_echo "$configure_input" |
++ sed 's/[\\\\&|]/\\\\&/g'`;; #(
++ *) ac_sed_conf_input=$configure_input;;
++ esac
++
++ case $ac_tag in
++ *:-:* | *:-) cat >"$ac_tmp/stdin" \
++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
++ esac
++ ;;
++ esac
++
++ ac_dir=`$as_dirname -- "$ac_file" ||
++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$ac_file" : 'X\(//\)[^/]' \| \
++ X"$ac_file" : 'X\(//\)$' \| \
++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$ac_file" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ as_dir="$ac_dir"; as_fn_mkdir_p
++ ac_builddir=.
++
++case "$ac_dir" in
++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
++*)
++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
++ # A ".." for each directory in $ac_dir_suffix.
++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
++ case $ac_top_builddir_sub in
++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
++ esac ;;
++esac
++ac_abs_top_builddir=$ac_pwd
++ac_abs_builddir=$ac_pwd$ac_dir_suffix
++# for backward compatibility:
++ac_top_builddir=$ac_top_build_prefix
++
++case $srcdir in
++ .) # We are building in place.
++ ac_srcdir=.
++ ac_top_srcdir=$ac_top_builddir_sub
++ ac_abs_top_srcdir=$ac_pwd ;;
++ [\\/]* | ?:[\\/]* ) # Absolute name.
++ ac_srcdir=$srcdir$ac_dir_suffix;
++ ac_top_srcdir=$srcdir
++ ac_abs_top_srcdir=$srcdir ;;
++ *) # Relative name.
++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
++ ac_top_srcdir=$ac_top_build_prefix$srcdir
++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
++esac
++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+- case "$srcdir" in
+- [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
+- *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
++
++ case $ac_mode in
++ :F)
++ #
++ # CONFIG_FILE
++ #
++
++ case $INSTALL in
++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
++ esac
++ ac_MKDIR_P=$MKDIR_P
++ case $MKDIR_P in
++ [\\/$]* | ?:[\\/]* ) ;;
++ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
++_ACEOF
+
+- # Make a symlink if possible; otherwise try a hard link.
+- if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
+- ln $srcdir/$ac_source $ac_dest; then :
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++# If the template does not know about datarootdir, expand it.
++# FIXME: This hack should be removed a few years after 2.60.
++ac_datarootdir_hack=; ac_datarootdir_seen=
++ac_sed_dataroot='
++/datarootdir/ {
++ p
++ q
++}
++/@datadir@/p
++/@docdir@/p
++/@infodir@/p
++/@localedir@/p
++/@mandir@/p'
++case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
++*datarootdir*) ac_datarootdir_seen=yes;;
++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
++$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++ ac_datarootdir_hack='
++ s&@datadir@&$datadir&g
++ s&@docdir@&$docdir&g
++ s&@infodir@&$infodir&g
++ s&@localedir@&$localedir&g
++ s&@mandir@&$mandir&g
++ s&\\\${datarootdir}&$datarootdir&g' ;;
++esac
++_ACEOF
++
++# Neutralize VPATH when `$srcdir' = `.'.
++# Shell code in configure.ac might set extrasub.
++# FIXME: do we really want to maintain this feature?
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++ac_sed_extra="$ac_vpsub
++$extrasub
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++:t
++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
++s|@configure_input@|$ac_sed_conf_input|;t t
++s&@top_builddir@&$ac_top_builddir_sub&;t t
++s&@top_build_prefix@&$ac_top_build_prefix&;t t
++s&@srcdir@&$ac_srcdir&;t t
++s&@abs_srcdir@&$ac_abs_srcdir&;t t
++s&@top_srcdir@&$ac_top_srcdir&;t t
++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
++s&@builddir@&$ac_builddir&;t t
++s&@abs_builddir@&$ac_abs_builddir&;t t
++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
++s&@INSTALL@&$ac_INSTALL&;t t
++s&@MKDIR_P@&$ac_MKDIR_P&;t t
++$ac_datarootdir_hack
++"
++eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
++ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
++
++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
++ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
++ "$ac_tmp/out"`; test -z "$ac_out"; } &&
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
++which seems to be undefined. Please make sure it is defined" >&5
++$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
++which seems to be undefined. Please make sure it is defined" >&2;}
++
++ rm -f "$ac_tmp/stdin"
++ case $ac_file in
++ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
++ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
++ esac \
++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
++ ;;
++ :H)
++ #
++ # CONFIG_HEADER
++ #
++ if test x"$ac_file" != x-; then
++ {
++ $as_echo "/* $configure_input */" \
++ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
++ } >"$ac_tmp/config.h" \
++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
++ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
++$as_echo "$as_me: $ac_file is unchanged" >&6;}
++ else
++ rm -f "$ac_file"
++ mv "$ac_tmp/config.h" "$ac_file" \
++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
++ fi
+ else
+- { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
++ $as_echo "/* $configure_input */" \
++ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
++ || as_fn_error $? "could not create -" "$LINENO" 5
+ fi
++# Compute "$ac_file"'s index in $config_headers.
++_am_arg="$ac_file"
++_am_stamp_count=1
++for _am_header in $config_headers :; do
++ case $_am_header in
++ $_am_arg | $_am_arg:* )
++ break ;;
++ * )
++ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
++ esac
+ done
+-EOF
+-cat >> $CONFIG_STATUS <<EOF
++echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
++$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$_am_arg" : 'X\(//\)[^/]' \| \
++ X"$_am_arg" : 'X\(//\)$' \| \
++ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$_am_arg" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`/stamp-h$_am_stamp_count
++ ;;
+
++ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
++$as_echo "$as_me: executing $ac_file commands" >&6;}
++ ;;
++ esac
+
+-EOF
+-cat >> $CONFIG_STATUS <<\EOF
+-test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
+-sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile;
++
++ case $ac_file$ac_mode in
++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
++ # Older Autoconf quotes --file arguments for eval, but not when files
++ # are listed without --file. Let's play safe and only enable the eval
++ # if we detect the quoting.
++ # TODO: see whether this extra hack can be removed once we start
++ # requiring Autoconf 2.70 or later.
++ case $CONFIG_FILES in #(
++ *\'*) :
++ eval set x "$CONFIG_FILES" ;; #(
++ *) :
++ set x $CONFIG_FILES ;; #(
++ *) :
++ ;;
++esac
++ shift
++ # Used to flag and report bootstrapping failures.
++ am_rc=0
++ for am_mf
++ do
++ # Strip MF so we end up with the name of the file.
++ am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'`
++ # Check whether this is an Automake generated Makefile which includes
++ # dependency-tracking related rules and includes.
++ # Grep'ing the whole file directly is not great: AIX grep has a line
++ # limit of 2048, but all sed's we know have understand at least 4000.
++ sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
++ || continue
++ am_dirpart=`$as_dirname -- "$am_mf" ||
++$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$am_mf" : 'X\(//\)[^/]' \| \
++ X"$am_mf" : 'X\(//\)$' \| \
++ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$am_mf" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ am_filepart=`$as_basename -- "$am_mf" ||
++$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \
++ X"$am_mf" : 'X\(//\)$' \| \
++ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X/"$am_mf" |
++ sed '/^.*\/\([^/][^/]*\)\/*$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ { echo "$as_me:$LINENO: cd "$am_dirpart" \
++ && sed -e '/# am--include-marker/d' "$am_filepart" \
++ | $MAKE -f - am--depfiles" >&5
++ (cd "$am_dirpart" \
++ && sed -e '/# am--include-marker/d' "$am_filepart" \
++ | $MAKE -f - am--depfiles) >&5 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } || am_rc=$?
++ done
++ if test $am_rc -ne 0; then
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "Something went wrong bootstrapping makefile fragments
++ for automatic dependency tracking. Try re-running configure with the
++ '--disable-dependency-tracking' option to at least be able to build
++ the package (albeit without support for automatic dependency tracking).
++See \`config.log' for more details" "$LINENO" 5; }
++ fi
++ { am_dirpart=; unset am_dirpart;}
++ { am_filepart=; unset am_filepart;}
++ { am_mf=; unset am_mf;}
++ { am_rc=; unset am_rc;}
++ rm -f conftest-deps.mk
++}
++ ;;
++ "po-directories":C)
++ for ac_file in $CONFIG_FILES; do
++ # Support "outfile[:infile[:infile...]]"
++ case "$ac_file" in
++ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
++ esac
++ # PO directories have a Makefile.in generated from Makefile.in.in.
++ case "$ac_file" in */Makefile.in)
++ # Adjust a relative srcdir.
++ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
++ ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
++ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
++ # In autoconf-2.13 it is called $ac_given_srcdir.
++ # In autoconf-2.50 it is called $srcdir.
++ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
++ case "$ac_given_srcdir" in
++ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
++ /*) top_srcdir="$ac_given_srcdir" ;;
++ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
++ esac
++ # Treat a directory as a PO directory if and only if it has a
++ # POTFILES.in file. This allows packages to have multiple PO
++ # directories under different names or in different locations.
++ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
++ rm -f "$ac_dir/POTFILES"
++ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
++ gt_tab=`printf '\t'`
++ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
++ POMAKEFILEDEPS="POTFILES.in"
++ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
++ # on $ac_dir but don't depend on user-specified configuration
++ # parameters.
++ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
++ # The LINGUAS file contains the set of available languages.
++ if test -n "$OBSOLETE_ALL_LINGUAS"; then
++ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
++ fi
++ ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
++ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
++ else
++ # The set of available languages was given in configure.in.
++ ALL_LINGUAS=$OBSOLETE_ALL_LINGUAS
++ fi
++ # Compute POFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
++ # Compute UPDATEPOFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
++ # Compute DUMMYPOFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
++ # Compute GMOFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
++ case "$ac_given_srcdir" in
++ .) srcdirpre= ;;
++ *) srcdirpre='$(srcdir)/' ;;
++ esac
++ POFILES=
++ UPDATEPOFILES=
++ DUMMYPOFILES=
++ GMOFILES=
++ for lang in $ALL_LINGUAS; do
++ POFILES="$POFILES $srcdirpre$lang.po"
++ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
++ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
++ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
++ done
++ # CATALOGS depends on both $ac_dir and the user's LINGUAS
++ # environment variable.
++ INST_LINGUAS=
++ if test -n "$ALL_LINGUAS"; then
++ for presentlang in $ALL_LINGUAS; do
++ useit=no
++ if test "%UNSET%" != "$LINGUAS"; then
++ desiredlanguages="$LINGUAS"
++ else
++ desiredlanguages="$ALL_LINGUAS"
++ fi
++ for desiredlang in $desiredlanguages; do
++ # Use the presentlang catalog if desiredlang is
++ # a. equal to presentlang, or
++ # b. a variant of presentlang (because in this case,
++ # presentlang can be used as a fallback for messages
++ # which are not translated in the desiredlang catalog).
++ case "$desiredlang" in
++ "$presentlang"*) useit=yes;;
++ esac
++ done
++ if test $useit = yes; then
++ INST_LINGUAS="$INST_LINGUAS $presentlang"
++ fi
++ done
++ fi
++ CATALOGS=
++ if test -n "$INST_LINGUAS"; then
++ for lang in $INST_LINGUAS; do
++ CATALOGS="$CATALOGS $lang.gmo"
++ done
++ fi
++ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
++ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
++ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
++ if test -f "$f"; then
++ case "$f" in
++ *.orig | *.bak | *~) ;;
++ *) cat "$f" >> "$ac_dir/Makefile" ;;
++ esac
++ fi
++ done
++ fi
++ ;;
++ esac
++ done ;;
++ "default":C)
+ chmod +x debian/rules;
+-test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
+-exit 0
+-EOF
+-chmod +x $CONFIG_STATUS
+-rm -fr confdefs* $ac_clean_files
+-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
++test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h ;;
++
++ esac
++done # for ac_tag
++
++
++as_fn_exit 0
++_ACEOF
++ac_clean_files=$ac_clean_files_save
++
++test $ac_write_fail = 0 ||
++ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
++
++
++# configure is writing to config.log, and then calls config.status.
++# config.status does its own redirection, appending to config.log.
++# Unfortunately, on DOS this fails, as config.log is still kept open
++# by configure, so config.status won't be able to write to it; its
++# output is simply discarded. So we exec the FD to /dev/null,
++# effectively closing config.log, so it can be properly (re)opened and
++# appended to by config.status. When coming back to configure, we
++# need to make the FD available again.
++if test "$no_create" != yes; then
++ ac_cs_success=:
++ ac_config_status_args=
++ test "$silent" = yes &&
++ ac_config_status_args="$ac_config_status_args --quiet"
++ exec 5>/dev/null
++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
++ exec 5>>config.log
++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
++ # would make configure fail if this is the last instruction.
++ $ac_cs_success || as_fn_exit 1
++fi
++if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
++$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
++fi
+
+diff -uprN clean/lrzsz-0.12.20/configure.in lrzsz-0.12.20/configure.in
+--- clean/lrzsz-0.12.20/configure.in 1998-12-30 07:50:07.000000000 +0000
++++ lrzsz-0.12.20/configure.in 2019-11-25 16:22:37.000000000 +0000
+@@ -92,7 +92,6 @@ AC_PROG_RANLIB
+ AC_ISC_POSIX
+ AC_AIX
+ AC_MINIX
+-AM_C_PROTOTYPES
+ AC_C_CONST
+ AC_C_INLINE
+
+@@ -253,18 +252,13 @@ ihave$lookup_facility
+ fi
+
+
+-AC_SUBST(CFLAGS)
+-AC_SUBST(LDFLAGS)
+ AC_SUBST(LIBS)
+
+-AM_GNU_GETTEXT
++AM_GNU_GETTEXT([external])
+
+-AC_DEFINE_UNQUOTED(LOCALEDIR,"$prefix/$DATADIRNAME")
+-AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
+-
+-AC_OUTPUT([Makefile intl/Makefile lib/Makefile testsuite/Makefile \
++AC_OUTPUT([Makefile lib/Makefile testsuite/Makefile \
+ man/Makefile po/Makefile.in src/Makefile debian/rules Specfile systype \
+ src/lrzszbug],
+-[sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile;
++[
+ chmod +x debian/rules;
+ test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h])
+diff -uprN clean/lrzsz-0.12.20/depcomp lrzsz-0.12.20/depcomp
+--- clean/lrzsz-0.12.20/depcomp 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/depcomp 2019-09-30 10:52:39.000000000 +0100
+@@ -0,0 +1,791 @@
++#! /bin/sh
++# depcomp - compile a program generating dependencies as side-effects
++
++scriptversion=2016-01-11.22; # UTC
++
++# Copyright (C) 1999-2017 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program. If not, see <http://www.gnu.org/licenses/>.
++
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
++
++case $1 in
++ '')
++ echo "$0: No command. Try '$0 --help' for more information." 1>&2
++ exit 1;
++ ;;
++ -h | --h*)
++ cat <<\EOF
++Usage: depcomp [--help] [--version] PROGRAM [ARGS]
++
++Run PROGRAMS ARGS to compile a file, generating dependencies
++as side-effects.
++
++Environment variables:
++ depmode Dependency tracking mode.
++ source Source file read by 'PROGRAMS ARGS'.
++ object Object file output by 'PROGRAMS ARGS'.
++ DEPDIR directory where to store dependencies.
++ depfile Dependency file to output.
++ tmpdepfile Temporary file to use when outputting dependencies.
++ libtool Whether libtool is used (yes/no).
++
++Report bugs to <bug-automake@gnu.org>.
++EOF
++ exit $?
++ ;;
++ -v | --v*)
++ echo "depcomp $scriptversion"
++ exit $?
++ ;;
++esac
++
++# Get the directory component of the given path, and save it in the
++# global variables '$dir'. Note that this directory component will
++# be either empty or ending with a '/' character. This is deliberate.
++set_dir_from ()
++{
++ case $1 in
++ */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
++ *) dir=;;
++ esac
++}
++
++# Get the suffix-stripped basename of the given path, and save it the
++# global variable '$base'.
++set_base_from ()
++{
++ base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
++}
++
++# If no dependency file was actually created by the compiler invocation,
++# we still have to create a dummy depfile, to avoid errors with the
++# Makefile "include basename.Plo" scheme.
++make_dummy_depfile ()
++{
++ echo "#dummy" > "$depfile"
++}
++
++# Factor out some common post-processing of the generated depfile.
++# Requires the auxiliary global variable '$tmpdepfile' to be set.
++aix_post_process_depfile ()
++{
++ # If the compiler actually managed to produce a dependency file,
++ # post-process it.
++ if test -f "$tmpdepfile"; then
++ # Each line is of the form 'foo.o: dependency.h'.
++ # Do two passes, one to just change these to
++ # $object: dependency.h
++ # and one to simply output
++ # dependency.h:
++ # which is needed to avoid the deleted-header problem.
++ { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
++ sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
++ } > "$depfile"
++ rm -f "$tmpdepfile"
++ else
++ make_dummy_depfile
++ fi
++}
++
++# A tabulation character.
++tab=' '
++# A newline character.
++nl='
++'
++# Character ranges might be problematic outside the C locale.
++# These definitions help.
++upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
++lower=abcdefghijklmnopqrstuvwxyz
++digits=0123456789
++alpha=${upper}${lower}
++
++if test -z "$depmode" || test -z "$source" || test -z "$object"; then
++ echo "depcomp: Variables source, object and depmode must be set" 1>&2
++ exit 1
++fi
++
++# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
++depfile=${depfile-`echo "$object" |
++ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
++tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
++
++rm -f "$tmpdepfile"
++
++# Avoid interferences from the environment.
++gccflag= dashmflag=
++
++# Some modes work just like other modes, but use different flags. We
++# parameterize here, but still list the modes in the big case below,
++# to make depend.m4 easier to write. Note that we *cannot* use a case
++# here, because this file can only contain one case statement.
++if test "$depmode" = hp; then
++ # HP compiler uses -M and no extra arg.
++ gccflag=-M
++ depmode=gcc
++fi
++
++if test "$depmode" = dashXmstdout; then
++ # This is just like dashmstdout with a different argument.
++ dashmflag=-xM
++ depmode=dashmstdout
++fi
++
++cygpath_u="cygpath -u -f -"
++if test "$depmode" = msvcmsys; then
++ # This is just like msvisualcpp but w/o cygpath translation.
++ # Just convert the backslash-escaped backslashes to single forward
++ # slashes to satisfy depend.m4
++ cygpath_u='sed s,\\\\,/,g'
++ depmode=msvisualcpp
++fi
++
++if test "$depmode" = msvc7msys; then
++ # This is just like msvc7 but w/o cygpath translation.
++ # Just convert the backslash-escaped backslashes to single forward
++ # slashes to satisfy depend.m4
++ cygpath_u='sed s,\\\\,/,g'
++ depmode=msvc7
++fi
++
++if test "$depmode" = xlc; then
++ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
++ gccflag=-qmakedep=gcc,-MF
++ depmode=gcc
++fi
++
++case "$depmode" in
++gcc3)
++## gcc 3 implements dependency tracking that does exactly what
++## we want. Yay! Note: for some reason libtool 1.4 doesn't like
++## it if -MD -MP comes after the -MF stuff. Hmm.
++## Unfortunately, FreeBSD c89 acceptance of flags depends upon
++## the command line argument order; so add the flags where they
++## appear in depend2.am. Note that the slowdown incurred here
++## affects only configure: in makefiles, %FASTDEP% shortcuts this.
++ for arg
++ do
++ case $arg in
++ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
++ *) set fnord "$@" "$arg" ;;
++ esac
++ shift # fnord
++ shift # $arg
++ done
++ "$@"
++ stat=$?
++ if test $stat -ne 0; then
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ mv "$tmpdepfile" "$depfile"
++ ;;
++
++gcc)
++## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
++## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
++## (see the conditional assignment to $gccflag above).
++## There are various ways to get dependency output from gcc. Here's
++## why we pick this rather obscure method:
++## - Don't want to use -MD because we'd like the dependencies to end
++## up in a subdir. Having to rename by hand is ugly.
++## (We might end up doing this anyway to support other compilers.)
++## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
++## -MM, not -M (despite what the docs say). Also, it might not be
++## supported by the other compilers which use the 'gcc' depmode.
++## - Using -M directly means running the compiler twice (even worse
++## than renaming).
++ if test -z "$gccflag"; then
++ gccflag=-MD,
++ fi
++ "$@" -Wp,"$gccflag$tmpdepfile"
++ stat=$?
++ if test $stat -ne 0; then
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ rm -f "$depfile"
++ echo "$object : \\" > "$depfile"
++ # The second -e expression handles DOS-style file names with drive
++ # letters.
++ sed -e 's/^[^:]*: / /' \
++ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
++## This next piece of magic avoids the "deleted header file" problem.
++## The problem is that when a header file which appears in a .P file
++## is deleted, the dependency causes make to die (because there is
++## typically no way to rebuild the header). We avoid this by adding
++## dummy dependencies for each header file. Too bad gcc doesn't do
++## this for us directly.
++## Some versions of gcc put a space before the ':'. On the theory
++## that the space means something, we add a space to the output as
++## well. hp depmode also adds that space, but also prefixes the VPATH
++## to the object. Take care to not repeat it in the output.
++## Some versions of the HPUX 10.20 sed can't process this invocation
++## correctly. Breaking it into two sed invocations is a workaround.
++ tr ' ' "$nl" < "$tmpdepfile" \
++ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
++ | sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++hp)
++ # This case exists only to let depend.m4 do its work. It works by
++ # looking at the text of this script. This case will never be run,
++ # since it is checked for above.
++ exit 1
++ ;;
++
++sgi)
++ if test "$libtool" = yes; then
++ "$@" "-Wp,-MDupdate,$tmpdepfile"
++ else
++ "$@" -MDupdate "$tmpdepfile"
++ fi
++ stat=$?
++ if test $stat -ne 0; then
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ rm -f "$depfile"
++
++ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
++ echo "$object : \\" > "$depfile"
++ # Clip off the initial element (the dependent). Don't try to be
++ # clever and replace this with sed code, as IRIX sed won't handle
++ # lines with more than a fixed number of characters (4096 in
++ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
++ # the IRIX cc adds comments like '#:fec' to the end of the
++ # dependency line.
++ tr ' ' "$nl" < "$tmpdepfile" \
++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
++ | tr "$nl" ' ' >> "$depfile"
++ echo >> "$depfile"
++ # The second pass generates a dummy entry for each header file.
++ tr ' ' "$nl" < "$tmpdepfile" \
++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
++ >> "$depfile"
++ else
++ make_dummy_depfile
++ fi
++ rm -f "$tmpdepfile"
++ ;;
++
++xlc)
++ # This case exists only to let depend.m4 do its work. It works by
++ # looking at the text of this script. This case will never be run,
++ # since it is checked for above.
++ exit 1
++ ;;
++
++aix)
++ # The C for AIX Compiler uses -M and outputs the dependencies
++ # in a .u file. In older versions, this file always lives in the
++ # current directory. Also, the AIX compiler puts '$object:' at the
++ # start of each line; $object doesn't have directory information.
++ # Version 6 uses the directory in both cases.
++ set_dir_from "$object"
++ set_base_from "$object"
++ if test "$libtool" = yes; then
++ tmpdepfile1=$dir$base.u
++ tmpdepfile2=$base.u
++ tmpdepfile3=$dir.libs/$base.u
++ "$@" -Wc,-M
++ else
++ tmpdepfile1=$dir$base.u
++ tmpdepfile2=$dir$base.u
++ tmpdepfile3=$dir$base.u
++ "$@" -M
++ fi
++ stat=$?
++ if test $stat -ne 0; then
++ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
++ exit $stat
++ fi
++
++ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
++ do
++ test -f "$tmpdepfile" && break
++ done
++ aix_post_process_depfile
++ ;;
++
++tcc)
++ # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
++ # FIXME: That version still under development at the moment of writing.
++ # Make that this statement remains true also for stable, released
++ # versions.
++ # It will wrap lines (doesn't matter whether long or short) with a
++ # trailing '\', as in:
++ #
++ # foo.o : \
++ # foo.c \
++ # foo.h \
++ #
++ # It will put a trailing '\' even on the last line, and will use leading
++ # spaces rather than leading tabs (at least since its commit 0394caf7
++ # "Emit spaces for -MD").
++ "$@" -MD -MF "$tmpdepfile"
++ stat=$?
++ if test $stat -ne 0; then
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ rm -f "$depfile"
++ # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
++ # We have to change lines of the first kind to '$object: \'.
++ sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
++ # And for each line of the second kind, we have to emit a 'dep.h:'
++ # dummy dependency, to avoid the deleted-header problem.
++ sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++## The order of this option in the case statement is important, since the
++## shell code in configure will try each of these formats in the order
++## listed in this file. A plain '-MD' option would be understood by many
++## compilers, so we must ensure this comes after the gcc and icc options.
++pgcc)
++ # Portland's C compiler understands '-MD'.
++ # Will always output deps to 'file.d' where file is the root name of the
++ # source file under compilation, even if file resides in a subdirectory.
++ # The object file name does not affect the name of the '.d' file.
++ # pgcc 10.2 will output
++ # foo.o: sub/foo.c sub/foo.h
++ # and will wrap long lines using '\' :
++ # foo.o: sub/foo.c ... \
++ # sub/foo.h ... \
++ # ...
++ set_dir_from "$object"
++ # Use the source, not the object, to determine the base name, since
++ # that's sadly what pgcc will do too.
++ set_base_from "$source"
++ tmpdepfile=$base.d
++
++ # For projects that build the same source file twice into different object
++ # files, the pgcc approach of using the *source* file root name can cause
++ # problems in parallel builds. Use a locking strategy to avoid stomping on
++ # the same $tmpdepfile.
++ lockdir=$base.d-lock
++ trap "
++ echo '$0: caught signal, cleaning up...' >&2
++ rmdir '$lockdir'
++ exit 1
++ " 1 2 13 15
++ numtries=100
++ i=$numtries
++ while test $i -gt 0; do
++ # mkdir is a portable test-and-set.
++ if mkdir "$lockdir" 2>/dev/null; then
++ # This process acquired the lock.
++ "$@" -MD
++ stat=$?
++ # Release the lock.
++ rmdir "$lockdir"
++ break
++ else
++ # If the lock is being held by a different process, wait
++ # until the winning process is done or we timeout.
++ while test -d "$lockdir" && test $i -gt 0; do
++ sleep 1
++ i=`expr $i - 1`
++ done
++ fi
++ i=`expr $i - 1`
++ done
++ trap - 1 2 13 15
++ if test $i -le 0; then
++ echo "$0: failed to acquire lock after $numtries attempts" >&2
++ echo "$0: check lockdir '$lockdir'" >&2
++ exit 1
++ fi
++
++ if test $stat -ne 0; then
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ rm -f "$depfile"
++ # Each line is of the form `foo.o: dependent.h',
++ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
++ # Do two passes, one to just change these to
++ # `$object: dependent.h' and one to simply `dependent.h:'.
++ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
++ # Some versions of the HPUX 10.20 sed can't process this invocation
++ # correctly. Breaking it into two sed invocations is a workaround.
++ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
++ | sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++hp2)
++ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
++ # compilers, which have integrated preprocessors. The correct option
++ # to use with these is +Maked; it writes dependencies to a file named
++ # 'foo.d', which lands next to the object file, wherever that
++ # happens to be.
++ # Much of this is similar to the tru64 case; see comments there.
++ set_dir_from "$object"
++ set_base_from "$object"
++ if test "$libtool" = yes; then
++ tmpdepfile1=$dir$base.d
++ tmpdepfile2=$dir.libs/$base.d
++ "$@" -Wc,+Maked
++ else
++ tmpdepfile1=$dir$base.d
++ tmpdepfile2=$dir$base.d
++ "$@" +Maked
++ fi
++ stat=$?
++ if test $stat -ne 0; then
++ rm -f "$tmpdepfile1" "$tmpdepfile2"
++ exit $stat
++ fi
++
++ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
++ do
++ test -f "$tmpdepfile" && break
++ done
++ if test -f "$tmpdepfile"; then
++ sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
++ # Add 'dependent.h:' lines.
++ sed -ne '2,${
++ s/^ *//
++ s/ \\*$//
++ s/$/:/
++ p
++ }' "$tmpdepfile" >> "$depfile"
++ else
++ make_dummy_depfile
++ fi
++ rm -f "$tmpdepfile" "$tmpdepfile2"
++ ;;
++
++tru64)
++ # The Tru64 compiler uses -MD to generate dependencies as a side
++ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
++ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
++ # dependencies in 'foo.d' instead, so we check for that too.
++ # Subdirectories are respected.
++ set_dir_from "$object"
++ set_base_from "$object"
++
++ if test "$libtool" = yes; then
++ # Libtool generates 2 separate objects for the 2 libraries. These
++ # two compilations output dependencies in $dir.libs/$base.o.d and
++ # in $dir$base.o.d. We have to check for both files, because
++ # one of the two compilations can be disabled. We should prefer
++ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
++ # automatically cleaned when .libs/ is deleted, while ignoring
++ # the former would cause a distcleancheck panic.
++ tmpdepfile1=$dir$base.o.d # libtool 1.5
++ tmpdepfile2=$dir.libs/$base.o.d # Likewise.
++ tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
++ "$@" -Wc,-MD
++ else
++ tmpdepfile1=$dir$base.d
++ tmpdepfile2=$dir$base.d
++ tmpdepfile3=$dir$base.d
++ "$@" -MD
++ fi
++
++ stat=$?
++ if test $stat -ne 0; then
++ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
++ exit $stat
++ fi
++
++ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
++ do
++ test -f "$tmpdepfile" && break
++ done
++ # Same post-processing that is required for AIX mode.
++ aix_post_process_depfile
++ ;;
++
++msvc7)
++ if test "$libtool" = yes; then
++ showIncludes=-Wc,-showIncludes
++ else
++ showIncludes=-showIncludes
++ fi
++ "$@" $showIncludes > "$tmpdepfile"
++ stat=$?
++ grep -v '^Note: including file: ' "$tmpdepfile"
++ if test $stat -ne 0; then
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ rm -f "$depfile"
++ echo "$object : \\" > "$depfile"
++ # The first sed program below extracts the file names and escapes
++ # backslashes for cygpath. The second sed program outputs the file
++ # name when reading, but also accumulates all include files in the
++ # hold buffer in order to output them again at the end. This only
++ # works with sed implementations that can handle large buffers.
++ sed < "$tmpdepfile" -n '
++/^Note: including file: *\(.*\)/ {
++ s//\1/
++ s/\\/\\\\/g
++ p
++}' | $cygpath_u | sort -u | sed -n '
++s/ /\\ /g
++s/\(.*\)/'"$tab"'\1 \\/p
++s/.\(.*\) \\/\1:/
++H
++$ {
++ s/.*/'"$tab"'/
++ G
++ p
++}' >> "$depfile"
++ echo >> "$depfile" # make sure the fragment doesn't end with a backslash
++ rm -f "$tmpdepfile"
++ ;;
++
++msvc7msys)
++ # This case exists only to let depend.m4 do its work. It works by
++ # looking at the text of this script. This case will never be run,
++ # since it is checked for above.
++ exit 1
++ ;;
++
++#nosideeffect)
++ # This comment above is used by automake to tell side-effect
++ # dependency tracking mechanisms from slower ones.
++
++dashmstdout)
++ # Important note: in order to support this mode, a compiler *must*
++ # always write the preprocessed file to stdout, regardless of -o.
++ "$@" || exit $?
++
++ # Remove the call to Libtool.
++ if test "$libtool" = yes; then
++ while test "X$1" != 'X--mode=compile'; do
++ shift
++ done
++ shift
++ fi
++
++ # Remove '-o $object'.
++ IFS=" "
++ for arg
++ do
++ case $arg in
++ -o)
++ shift
++ ;;
++ $object)
++ shift
++ ;;
++ *)
++ set fnord "$@" "$arg"
++ shift # fnord
++ shift # $arg
++ ;;
++ esac
++ done
++
++ test -z "$dashmflag" && dashmflag=-M
++ # Require at least two characters before searching for ':'
++ # in the target name. This is to cope with DOS-style filenames:
++ # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
++ "$@" $dashmflag |
++ sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
++ rm -f "$depfile"
++ cat < "$tmpdepfile" > "$depfile"
++ # Some versions of the HPUX 10.20 sed can't process this sed invocation
++ # correctly. Breaking it into two sed invocations is a workaround.
++ tr ' ' "$nl" < "$tmpdepfile" \
++ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
++ | sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++dashXmstdout)
++ # This case only exists to satisfy depend.m4. It is never actually
++ # run, as this mode is specially recognized in the preamble.
++ exit 1
++ ;;
++
++makedepend)
++ "$@" || exit $?
++ # Remove any Libtool call
++ if test "$libtool" = yes; then
++ while test "X$1" != 'X--mode=compile'; do
++ shift
++ done
++ shift
++ fi
++ # X makedepend
++ shift
++ cleared=no eat=no
++ for arg
++ do
++ case $cleared in
++ no)
++ set ""; shift
++ cleared=yes ;;
++ esac
++ if test $eat = yes; then
++ eat=no
++ continue
++ fi
++ case "$arg" in
++ -D*|-I*)
++ set fnord "$@" "$arg"; shift ;;
++ # Strip any option that makedepend may not understand. Remove
++ # the object too, otherwise makedepend will parse it as a source file.
++ -arch)
++ eat=yes ;;
++ -*|$object)
++ ;;
++ *)
++ set fnord "$@" "$arg"; shift ;;
++ esac
++ done
++ obj_suffix=`echo "$object" | sed 's/^.*\././'`
++ touch "$tmpdepfile"
++ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
++ rm -f "$depfile"
++ # makedepend may prepend the VPATH from the source file name to the object.
++ # No need to regex-escape $object, excess matching of '.' is harmless.
++ sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
++ # Some versions of the HPUX 10.20 sed can't process the last invocation
++ # correctly. Breaking it into two sed invocations is a workaround.
++ sed '1,2d' "$tmpdepfile" \
++ | tr ' ' "$nl" \
++ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
++ | sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile" "$tmpdepfile".bak
++ ;;
++
++cpp)
++ # Important note: in order to support this mode, a compiler *must*
++ # always write the preprocessed file to stdout.
++ "$@" || exit $?
++
++ # Remove the call to Libtool.
++ if test "$libtool" = yes; then
++ while test "X$1" != 'X--mode=compile'; do
++ shift
++ done
++ shift
++ fi
++
++ # Remove '-o $object'.
++ IFS=" "
++ for arg
++ do
++ case $arg in
++ -o)
++ shift
++ ;;
++ $object)
++ shift
++ ;;
++ *)
++ set fnord "$@" "$arg"
++ shift # fnord
++ shift # $arg
++ ;;
++ esac
++ done
++
++ "$@" -E \
++ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
++ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
++ | sed '$ s: \\$::' > "$tmpdepfile"
++ rm -f "$depfile"
++ echo "$object : \\" > "$depfile"
++ cat < "$tmpdepfile" >> "$depfile"
++ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++msvisualcpp)
++ # Important note: in order to support this mode, a compiler *must*
++ # always write the preprocessed file to stdout.
++ "$@" || exit $?
++
++ # Remove the call to Libtool.
++ if test "$libtool" = yes; then
++ while test "X$1" != 'X--mode=compile'; do
++ shift
++ done
++ shift
++ fi
++
++ IFS=" "
++ for arg
++ do
++ case "$arg" in
++ -o)
++ shift
++ ;;
++ $object)
++ shift
++ ;;
++ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
++ set fnord "$@"
++ shift
++ shift
++ ;;
++ *)
++ set fnord "$@" "$arg"
++ shift
++ shift
++ ;;
++ esac
++ done
++ "$@" -E 2>/dev/null |
++ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
++ rm -f "$depfile"
++ echo "$object : \\" > "$depfile"
++ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
++ echo "$tab" >> "$depfile"
++ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++msvcmsys)
++ # This case exists only to let depend.m4 do its work. It works by
++ # looking at the text of this script. This case will never be run,
++ # since it is checked for above.
++ exit 1
++ ;;
++
++none)
++ exec "$@"
++ ;;
++
++*)
++ echo "Unknown depmode $depmode" 1>&2
++ exit 1
++ ;;
++esac
++
++exit 0
++
++# Local Variables:
++# mode: shell-script
++# sh-indentation: 2
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-time-zone: "UTC0"
++# time-stamp-end: "; # UTC"
++# End:
+diff -uprN clean/lrzsz-0.12.20/intl/bindtextdom.c lrzsz-0.12.20/intl/bindtextdom.c
+--- clean/lrzsz-0.12.20/intl/bindtextdom.c 1998-04-26 14:22:36.000000000 +0100
++++ lrzsz-0.12.20/intl/bindtextdom.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,199 +0,0 @@
+-/* Implementation of the bindtextdomain(3) function
+- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software Foundation,
+- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+-
+-#ifdef HAVE_CONFIG_H
+-# include <config.h>
+-#endif
+-
+-#if defined STDC_HEADERS || defined _LIBC
+-# include <stdlib.h>
+-#else
+-# ifdef HAVE_MALLOC_H
+-# include <malloc.h>
+-# else
+-void free ();
+-# endif
+-#endif
+-
+-#if defined HAVE_STRING_H || defined _LIBC
+-# include <string.h>
+-#else
+-# include <strings.h>
+-# ifndef memcpy
+-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
+-# endif
+-#endif
+-
+-#ifdef _LIBC
+-# include <libintl.h>
+-#else
+-# include "libgettext.h"
+-#endif
+-#include "gettext.h"
+-#include "gettextP.h"
+-
+-/* @@ end of prolog @@ */
+-
+-/* Contains the default location of the message catalogs. */
+-extern const char _nl_default_dirname[];
+-
+-/* List with bindings of specific domains. */
+-extern struct binding *_nl_domain_bindings;
+-
+-
+-/* Names for the libintl functions are a problem. They must not clash
+- with existing names and they should follow ANSI C. But this source
+- code is also used in GNU C Library where the names have a __
+- prefix. So we have to make a difference here. */
+-#ifdef _LIBC
+-# define BINDTEXTDOMAIN __bindtextdomain
+-# define strdup(str) __strdup (str)
+-#else
+-# define BINDTEXTDOMAIN bindtextdomain__
+-#endif
+-
+-/* Specify that the DOMAINNAME message catalog will be found
+- in DIRNAME rather than in the system locale data base. */
+-char *
+-BINDTEXTDOMAIN (domainname, dirname)
+- const char *domainname;
+- const char *dirname;
+-{
+- struct binding *binding;
+-
+- /* Some sanity checks. */
+- if (domainname == NULL || domainname[0] == '\0')
+- return NULL;
+-
+- for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
+- {
+- int compare = strcmp (domainname, binding->domainname);
+- if (compare == 0)
+- /* We found it! */
+- break;
+- if (compare < 0)
+- {
+- /* It is not in the list. */
+- binding = NULL;
+- break;
+- }
+- }
+-
+- if (dirname == NULL)
+- /* The current binding has be to returned. */
+- return binding == NULL ? (char *) _nl_default_dirname : binding->dirname;
+-
+- if (binding != NULL)
+- {
+- /* The domain is already bound. If the new value and the old
+- one are equal we simply do nothing. Otherwise replace the
+- old binding. */
+- if (strcmp (dirname, binding->dirname) != 0)
+- {
+- char *new_dirname;
+-
+- if (strcmp (dirname, _nl_default_dirname) == 0)
+- new_dirname = (char *) _nl_default_dirname;
+- else
+- {
+-#if defined _LIBC || defined HAVE_STRDUP
+- new_dirname = strdup (dirname);
+- if (new_dirname == NULL)
+- return NULL;
+-#else
+- size_t len = strlen (dirname) + 1;
+- new_dirname = (char *) malloc (len);
+- if (new_dirname == NULL)
+- return NULL;
+-
+- memcpy (new_dirname, dirname, len);
+-#endif
+- }
+-
+- if (binding->dirname != _nl_default_dirname)
+- free (binding->dirname);
+-
+- binding->dirname = new_dirname;
+- }
+- }
+- else
+- {
+- /* We have to create a new binding. */
+- size_t len;
+- struct binding *new_binding =
+- (struct binding *) malloc (sizeof (*new_binding));
+-
+- if (new_binding == NULL)
+- return NULL;
+-
+-#if defined _LIBC || defined HAVE_STRDUP
+- new_binding->domainname = strdup (domainname);
+- if (new_binding->domainname == NULL)
+- return NULL;
+-#else
+- len = strlen (domainname) + 1;
+- new_binding->domainname = (char *) malloc (len);
+- if (new_binding->domainname == NULL)
+- return NULL;
+- memcpy (new_binding->domainname, domainname, len);
+-#endif
+-
+- if (strcmp (dirname, _nl_default_dirname) == 0)
+- new_binding->dirname = (char *) _nl_default_dirname;
+- else
+- {
+-#if defined _LIBC || defined HAVE_STRDUP
+- new_binding->dirname = strdup (dirname);
+- if (new_binding->dirname == NULL)
+- return NULL;
+-#else
+- len = strlen (dirname) + 1;
+- new_binding->dirname = (char *) malloc (len);
+- if (new_binding->dirname == NULL)
+- return NULL;
+- memcpy (new_binding->dirname, dirname, len);
+-#endif
+- }
+-
+- /* Now enqueue it. */
+- if (_nl_domain_bindings == NULL
+- || strcmp (domainname, _nl_domain_bindings->domainname) < 0)
+- {
+- new_binding->next = _nl_domain_bindings;
+- _nl_domain_bindings = new_binding;
+- }
+- else
+- {
+- binding = _nl_domain_bindings;
+- while (binding->next != NULL
+- && strcmp (domainname, binding->next->domainname) > 0)
+- binding = binding->next;
+-
+- new_binding->next = binding->next;
+- binding->next = new_binding;
+- }
+-
+- binding = new_binding;
+- }
+-
+- return binding->dirname;
+-}
+-
+-#ifdef _LIBC
+-/* Alias for function name in GNU C Library. */
+-weak_alias (__bindtextdomain, bindtextdomain);
+-#endif
+diff -uprN clean/lrzsz-0.12.20/intl/cat-compat.c lrzsz-0.12.20/intl/cat-compat.c
+--- clean/lrzsz-0.12.20/intl/cat-compat.c 1998-04-26 14:22:37.000000000 +0100
++++ lrzsz-0.12.20/intl/cat-compat.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,262 +0,0 @@
+-/* Compatibility code for gettext-using-catgets interface.
+- Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software Foundation,
+- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+-
+-#ifdef HAVE_CONFIG_H
+-# include <config.h>
+-#endif
+-
+-#include <stdio.h>
+-
+-#ifdef STDC_HEADERS
+-# include <stdlib.h>
+-# include <string.h>
+-#else
+-char *getenv ();
+-# ifdef HAVE_MALLOC_H
+-# include <malloc.h>
+-# endif
+-#endif
+-
+-#ifdef HAVE_NL_TYPES_H
+-# include <nl_types.h>
+-#endif
+-
+-#include "libgettext.h"
+-
+-/* @@ end of prolog @@ */
+-
+-/* XPG3 defines the result of `setlocale (category, NULL)' as:
+- ``Directs `setlocale()' to query `category' and return the current
+- setting of `local'.''
+- However it does not specify the exact format. And even worse: POSIX
+- defines this not at all. So we can use this feature only on selected
+- system (e.g. those using GNU C Library). */
+-#ifdef _LIBC
+-# define HAVE_LOCALE_NULL
+-#endif
+-
+-/* The catalog descriptor. */
+-static nl_catd catalog = (nl_catd) -1;
+-
+-/* Name of the default catalog. */
+-static const char default_catalog_name[] = "messages";
+-
+-/* Name of currently used catalog. */
+-static const char *catalog_name = default_catalog_name;
+-
+-/* Get ID for given string. If not found return -1. */
+-static int msg_to_cat_id PARAMS ((const char *msg));
+-
+-/* Substitution for systems lacking this function in their C library. */
+-#if !_LIBC && !HAVE_STPCPY
+-static char *stpcpy PARAMS ((char *dest, const char *src));
+-#endif
+-
+-
+-/* Set currently used domain/catalog. */
+-char *
+-textdomain (domainname)
+- const char *domainname;
+-{
+- nl_catd new_catalog;
+- char *new_name;
+- size_t new_name_len;
+- char *lang;
+-
+-#if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES \
+- && defined HAVE_LOCALE_NULL
+- lang = setlocale (LC_MESSAGES, NULL);
+-#else
+- lang = getenv ("LC_ALL");
+- if (lang == NULL || lang[0] == '\0')
+- {
+- lang = getenv ("LC_MESSAGES");
+- if (lang == NULL || lang[0] == '\0')
+- lang = getenv ("LANG");
+- }
+-#endif
+- if (lang == NULL || lang[0] == '\0')
+- lang = "C";
+-
+- /* See whether name of currently used domain is asked. */
+- if (domainname == NULL)
+- return (char *) catalog_name;
+-
+- if (domainname[0] == '\0')
+- domainname = default_catalog_name;
+-
+- /* Compute length of added path element. */
+- new_name_len = sizeof (LOCALEDIR) - 1 + 1 + strlen (lang)
+- + sizeof ("/LC_MESSAGES/") - 1 + sizeof (PACKAGE) - 1
+- + sizeof (".cat");
+-
+- new_name = (char *) malloc (new_name_len);
+- if (new_name == NULL)
+- return NULL;
+-
+- strcpy (new_name, PACKAGE);
+- new_catalog = catopen (new_name, 0);
+-
+- if (new_catalog == (nl_catd) -1)
+- {
+- /* NLSPATH search didn't work, try absolute path */
+- sprintf (new_name, "%s/%s/LC_MESSAGES/%s.cat", LOCALEDIR, lang,
+- PACKAGE);
+- new_catalog = catopen (new_name, 0);
+-
+- if (new_catalog == (nl_catd) -1)
+- {
+- free (new_name);
+- return (char *) catalog_name;
+- }
+- }
+-
+- /* Close old catalog. */
+- if (catalog != (nl_catd) -1)
+- catclose (catalog);
+- if (catalog_name != default_catalog_name)
+- free ((char *) catalog_name);
+-
+- catalog = new_catalog;
+- catalog_name = new_name;
+-
+- return (char *) catalog_name;
+-}
+-
+-char *
+-bindtextdomain (domainname, dirname)
+- const char *domainname;
+- const char *dirname;
+-{
+-#if HAVE_SETENV || HAVE_PUTENV
+- char *old_val, *new_val, *cp;
+- size_t new_val_len;
+-
+- /* This does not make much sense here but to be compatible do it. */
+- if (domainname == NULL)
+- return NULL;
+-
+- /* Compute length of added path element. If we use setenv we don't need
+- the first byts for NLSPATH=, but why complicate the code for this
+- peanuts. */
+- new_val_len = sizeof ("NLSPATH=") - 1 + strlen (dirname)
+- + sizeof ("/%L/LC_MESSAGES/%N.cat");
+-
+- old_val = getenv ("NLSPATH");
+- if (old_val == NULL || old_val[0] == '\0')
+- {
+- old_val = NULL;
+- new_val_len += 1 + sizeof (LOCALEDIR) - 1
+- + sizeof ("/%L/LC_MESSAGES/%N.cat");
+- }
+- else
+- new_val_len += strlen (old_val);
+-
+- new_val = (char *) malloc (new_val_len);
+- if (new_val == NULL)
+- return NULL;
+-
+-# if HAVE_SETENV
+- cp = new_val;
+-# else
+- cp = stpcpy (new_val, "NLSPATH=");
+-# endif
+-
+- cp = stpcpy (cp, dirname);
+- cp = stpcpy (cp, "/%L/LC_MESSAGES/%N.cat:");
+-
+- if (old_val == NULL)
+- {
+-# if __STDC__
+- stpcpy (cp, LOCALEDIR "/%L/LC_MESSAGES/%N.cat");
+-# else
+-
+- cp = stpcpy (cp, LOCALEDIR);
+- stpcpy (cp, "/%L/LC_MESSAGES/%N.cat");
+-# endif
+- }
+- else
+- stpcpy (cp, old_val);
+-
+-# if HAVE_SETENV
+- setenv ("NLSPATH", new_val, 1);
+- free (new_val);
+-# else
+- putenv (new_val);
+- /* Do *not* free the environment entry we just entered. It is used
+- from now on. */
+-# endif
+-
+-#endif
+-
+- return (char *) domainname;
+-}
+-
+-#undef gettext
+-char *
+-gettext (msg)
+- const char *msg;
+-{
+- int msgid;
+-
+- if (msg == NULL || catalog == (nl_catd) -1)
+- return (char *) msg;
+-
+- /* Get the message from the catalog. We always use set number 1.
+- The message ID is computed by the function `msg_to_cat_id'
+- which works on the table generated by `po-to-tbl'. */
+- msgid = msg_to_cat_id (msg);
+- if (msgid == -1)
+- return (char *) msg;
+-
+- return catgets (catalog, 1, msgid, (char *) msg);
+-}
+-
+-/* Look through the table `_msg_tbl' which has `_msg_tbl_length' entries
+- for the one equal to msg. If it is found return the ID. In case when
+- the string is not found return -1. */
+-static int
+-msg_to_cat_id (msg)
+- const char *msg;
+-{
+- int cnt;
+-
+- for (cnt = 0; cnt < _msg_tbl_length; ++cnt)
+- if (strcmp (msg, _msg_tbl[cnt]._msg) == 0)
+- return _msg_tbl[cnt]._msg_number;
+-
+- return -1;
+-}
+-
+-
+-/* @@ begin of epilog @@ */
+-
+-/* We don't want libintl.a to depend on any other library. So we
+- avoid the non-standard function stpcpy. In GNU C Library this
+- function is available, though. Also allow the symbol HAVE_STPCPY
+- to be defined. */
+-#if !_LIBC && !HAVE_STPCPY
+-static char *
+-stpcpy (dest, src)
+- char *dest;
+- const char *src;
+-{
+- while ((*dest++ = *src++) != '\0')
+- /* Do nothing. */ ;
+- return dest - 1;
+-}
+-#endif
+diff -uprN clean/lrzsz-0.12.20/intl/ChangeLog lrzsz-0.12.20/intl/ChangeLog
+--- clean/lrzsz-0.12.20/intl/ChangeLog 1998-04-26 14:22:35.000000000 +0100
++++ lrzsz-0.12.20/intl/ChangeLog 1970-01-01 01:00:00.000000000 +0100
+@@ -1,1022 +0,0 @@
+-1997-09-06 02:10 Ulrich Drepper <drepper@cygnus.com>
+-
+- * intlh.inst.in: Reformat copyright.
+-
+-1997-08-19 15:22 Ulrich Drepper <drepper@cygnus.com>
+-
+- * dcgettext.c (DCGETTEXT): Remove wrong comment.
+-
+-1997-08-16 00:13 Ulrich Drepper <drepper@cygnus.com>
+-
+- * Makefile.in (install-data): Don't change directory to install.
+-
+-1997-08-01 14:30 Ulrich Drepper <drepper@cygnus.com>
+-
+- * cat-compat.c: Fix copyright.
+-
+- * localealias.c: Don't define strchr unless !HAVE_STRCHR.
+-
+- * loadmsgcat.c: Update copyright. Fix typos.
+-
+- * l10nflist.c: Don't define strchr unless !HAVE_STRCHR.
+- (_nl_make_l10nflist): Handle sponsor and revision correctly.
+-
+- * gettext.c: Update copyright.
+- * gettext.h: Likewise.
+- * hash-string.h: Likewise.
+-
+- * finddomain.c: Remoave dead code. Define strchr only if
+- !HAVE_STRCHR.
+-
+- * explodename.c: Include <sys/types.h>.
+-
+- * explodename.c: Reformat copyright text.
+- (_nl_explode_name): Fix typo.
+-
+- * dcgettext.c: Define and use __set_errno.
+- (guess_category_value): Don't use setlocale if HAVE_LC_MESSAGES is
+- not defined.
+-
+- * bindtextdom.c: Pretty printing.
+-
+-1997-05-01 02:25 Ulrich Drepper <drepper@cygnus.com>
+-
+- * dcgettext.c (guess_category_value): Don't depend on
+- HAVE_LC_MESSAGES. We don't need the macro here.
+- Patch by Bruno Haible <haible@ilog.fr>.
+-
+- * cat-compat.c (textdomain): DoN't refer to HAVE_SETLOCALE_NULL
+- macro. Instead use HAVE_LOCALE_NULL and define it when using
+- glibc, as in dcgettext.c.
+- Patch by Bruno Haible <haible@ilog.fr>.
+-
+- * Makefile.in (CPPFLAGS): New variable. Reported by Franc,ois
+- Pinard.
+-
+-Mon Mar 10 06:51:17 1997 Ulrich Drepper <drepper@cygnus.com>
+-
+- * Makefile.in: Implement handling of libtool.
+-
+- * gettextP.h: Change data structures for use of generic lowlevel
+- i18n file handling.
+-
+-Wed Dec 4 20:21:18 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * textdomain.c: Put parentheses around arguments of memcpy macro
+- definition.
+- * localealias.c: Likewise.
+- * l10nflist.c: Likewise.
+- * finddomain.c: Likewise.
+- * bindtextdom.c: Likewise.
+- Reported by Thomas Esken.
+-
+-Mon Nov 25 22:57:51 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * textdomain.c: Move definition of `memcpy` macro to right
+- position.
+-
+-Fri Nov 22 04:01:58 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * finddomain.c [!HAVE_STRING_H && !_LIBC]: Define memcpy using
+- bcopy if not already defined. Reported by Thomas Esken.
+- * bindtextdom.c: Likewise.
+- * l10nflist.c: Likewise.
+- * localealias.c: Likewise.
+- * textdomain.c: Likewise.
+-
+-Tue Oct 29 11:10:27 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * Makefile.in (libdir): Change to use exec_prefix instead of
+- prefix. Reported by Knut-HåvardAksnes <etokna@eto.ericsson.se>.
+-
+-Sat Aug 31 03:07:09 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * l10nflist.c (_nl_normalize_codeset): We convert to lower case,
+- so don't prepend uppercase `ISO' for only numeric arg.
+-
+-Fri Jul 19 00:15:46 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * l10nflist.c: Move inclusion of argz.h, ctype.h, stdlib.h after
+- definition of _GNU_SOURCE. Patch by Roland McGrath.
+-
+- * Makefile.in (uninstall): Fix another bug with `for' loop and
+- empty arguments. Patch by Jim Meyering. Correct name os
+- uninstalled files: no intl- prefix anymore.
+-
+- * Makefile.in (install-data): Again work around shells which
+- cannot handle mpty for list. Reported by Jim Meyering.
+-
+-Sat Jul 13 18:11:35 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * Makefile.in (install): Split goal. Now depend on install-exec
+- and install-data.
+- (install-exec, install-data): New goals. Created from former
+- install goal.
+- Reported by Karl Berry.
+-
+-Sat Jun 22 04:58:14 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * Makefile.in (MKINSTALLDIRS): New variable. Path to
+- mkinstalldirs script.
+- (install): use MKINSTALLDIRS variable or if the script is not present
+- try to find it in the $top_scrdir).
+-
+-Wed Jun 19 02:56:56 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * l10nflist.c: Linux libc *partly* includes the argz_* functions.
+- Grr. Work around by renaming the static version and use macros
+- for renaming.
+-
+-Tue Jun 18 20:11:17 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * l10nflist.c: Correct presence test macros of __argz_* functions.
+-
+- * l10nflist.c: Include <argz.h> based on test of it instead when
+- __argz_* functions are available.
+- Reported by Andreas Schwab.
+-
+-Thu Jun 13 15:17:44 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * explodename.c, l10nflist.c: Define NULL for dumb systems.
+-
+-Tue Jun 11 17:05:13 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * intlh.inst.in, libgettext.h (dcgettext): Rename local variable
+- result to __result to prevent name clash.
+-
+- * l10nflist.c, localealias.c, dcgettext.c: Define _GNU_SOURCE to
+- get prototype for stpcpy and strcasecmp.
+-
+- * intlh.inst.in, libgettext.h: Move declaration of
+- `_nl_msg_cat_cntr' outside __extension__ block to prevent warning
+- from gcc's -Wnested-extern option.
+-
+-Fri Jun 7 01:58:00 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * Makefile.in (install): Remove comment.
+-
+-Thu Jun 6 17:28:17 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * Makefile.in (install): Work around for another Buglix stupidity.
+- Always use an `else' close for `if's. Reported by Nelson Beebe.
+-
+- * Makefile.in (intlh.inst): Correct typo in phony rule.
+- Reported by Nelson Beebe.
+-
+-Thu Jun 6 01:49:52 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * dcgettext.c (read_alias_file): Rename variable alloca_list to
+- block_list as the macro calls assume.
+- Patch by Eric Backus.
+-
+- * localealias.c [!HAVE_ALLOCA]: Define alloca as macro using
+- malloc.
+- (read_alias_file): Rename varriabe alloca_list to block_list as the
+- macro calls assume.
+- Patch by Eric Backus.
+-
+- * l10nflist.c: Correct conditional for <argz.h> inclusion.
+- Reported by Roland McGrath.
+-
+- * Makefile.in (all): Depend on all-@USE_INCLUDED_LIBINTL@, not
+- all-@USE_NLS@.
+-
+- * Makefile.in (install): intlh.inst comes from local dir, not
+- $(srcdir).
+-
+- * Makefile.in (intlh.inst): Special handling of this goal. If
+- used in gettext, this is really a rul to construct this file. If
+- used in any other package it is defined as a .PHONY rule with
+- empty body.
+-
+- * finddomain.c: Extract locale file information handling into
+- l10nfile.c. Rename local stpcpy__ function to stpcpy.
+-
+- * dcgettext.c (stpcpy): Add local definition.
+-
+- * l10nflist.c: Solve some portability problems. Patches partly by
+- Thomas Esken. Add local definition of stpcpy.
+-
+-Tue Jun 4 02:47:49 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * intlh.inst.in: Don't depend including <locale.h> on
+- HAVE_LOCALE_H. Instead configure must rewrite this fiile
+- depending on the result of the configure run.
+-
+- * Makefile.in (install): libintl.inst is now called intlh.inst.
+- Add rules for updating intlh.inst from intlh.inst.in.
+-
+- * libintl.inst: Renamed to intlh.inst.in.
+-
+- * localealias.c, dcgettext.c [__GNUC__]: Define HAVE_ALLOCA to 1
+- because gcc has __buitlin_alloca.
+- Reported by Roland McGrath.
+-
+-Mon Jun 3 00:32:16 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * Makefile.in (installcheck): New goal to fulfill needs of
+- automake's distcheck.
+-
+- * Makefile.in (install): Reorder commands so that VERSION is
+- found.
+-
+- * Makefile.in (gettextsrcdir): Now use subdirectory intl/ in
+- @datadir@/gettext.
+- (COMSRCS): Add l10nfile.c.
+- (OBJECTS): Add l10nfile.o.
+- (DISTFILES): Rename to DISTFILE.normal. Remove $(DISTFILES.common).
+- (DISTFILE.gettext): Remove $(DISTFILES.common).
+- (all-gettext): Remove goal.
+- (install): If $(PACKAGE) = gettext install, otherwose do nothing. No
+- package but gettext itself should install libintl.h + headers.
+- (dist): Extend goal to work for gettext, too.
+- (dist-gettext): Remove goal.
+-
+- * dcgettext.c [!HAVE_ALLOCA]: Define macro alloca by using malloc.
+-
+-Sun Jun 2 17:33:06 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * loadmsgcat.c (_nl_load_domain): Parameter is now comes from
+- find_l10nfile.
+-
+-Sat Jun 1 02:23:03 1996 Ulrich Drepper <drepper@cygnus.com>
+-
+- * l10nflist.c (__argz_next): Add definition.
+-
+- * dcgettext.c [!HAVE_ALLOCA]: Add code for handling missing alloca
+- code. Use new l10nfile handling.
+-
+- * localealias.c [!HAVE_ALLOCA]: Add code for handling missing
+- alloca code.
+-
+- * l10nflist.c: Initial revision.
+-
+-Tue Apr 2 18:51:18 1996 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (all-gettext): New goal. Same as all-yes.
+-
+-Thu Mar 28 23:01:22 1996 Karl Eichwalder <ke@ke.central.de>
+-
+- * Makefile.in (gettextsrcdir): Define using @datadir@.
+-
+-Tue Mar 26 12:39:14 1996 Ulrich Drepper <drepper@myware>
+-
+- * finddomain.c: Include <ctype.h>. Reported by Roland McGrath.
+-
+-Sat Mar 23 02:00:35 1996 Ulrich Drepper <drepper@myware>
+-
+- * finddomain.c (stpcpy): Rename to stpcpy__ to prevent clashing
+- with external declaration.
+-
+-Sat Mar 2 00:47:09 1996 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (all-no): Rename from all_no.
+-
+-Sat Feb 17 00:25:59 1996 Ulrich Drepper <drepper@myware>
+-
+- * gettextP.h [loaded_domain]: Array `successor' must now contain up
+- to 63 elements (because of codeset name normalization).
+-
+- * finddomain.c: Implement codeset name normalization.
+-
+-Thu Feb 15 04:39:09 1996 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (all): Define to `all-@USE_NLS@'.
+- (all-yes, all_no): New goals. `all-no' is noop, `all-yes'
+- is former all.
+-
+-Mon Jan 15 21:46:01 1996 Howard Gayle <howard@hal.com>
+-
+- * localealias.c (alias_compare): Increment string pointers in loop
+- of strcasecmp replacement.
+-
+-Fri Dec 29 21:16:34 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (install-src): Who commented this goal out ? :-)
+-
+-Fri Dec 29 15:08:16 1995 Ulrich Drepper <drepper@myware>
+-
+- * dcgettext.c (DCGETTEXT): Save `errno'. Failing system calls
+- should not effect it because a missing catalog is no error.
+- Reported by Harald K<o:>nig <koenig@tat.physik.uni-tuebingen.de>.
+-
+-Tue Dec 19 22:09:13 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (Makefile): Explicitly use $(SHELL) for running
+- shell scripts.
+-
+-Fri Dec 15 17:34:59 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
+-
+- * Makefile.in (install-src): Only install library and header when
+- we use the own implementation. Don't do it when using the
+- system's gettext or catgets functions.
+-
+- * dcgettext.c (find_msg): Must not swap domain->hash_size here.
+-
+-Sat Dec 9 16:24:37 1995 Ulrich Drepper <drepper@myware>
+-
+- * localealias.c, libintl.inst, libgettext.h, hash-string.h,
+- gettextP.h, finddomain.c, dcgettext.c, cat-compat.c:
+- Use PARAMS instead of __P. Suggested by Roland McGrath.
+-
+-Tue Dec 5 11:39:14 1995 Larry Schwimmer <rosebud@cyclone.stanford.edu>
+-
+- * libgettext.h: Use `#if !defined (_LIBINTL_H)' instead of `#if
+- !_LIBINTL_H' because Solaris defines _LIBINTL_H as empty.
+-
+-Mon Dec 4 15:42:07 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (install-src):
+- Install libintl.inst instead of libintl.h.install.
+-
+-Sat Dec 2 22:51:38 1995 Marcus Daniels <marcus@sysc.pdx.edu>
+-
+- * cat-compat.c (textdomain):
+- Reverse order in which files are tried you load. First
+- try local file, when this failed absolute path.
+-
+-Wed Nov 29 02:03:53 1995 Nelson H. F. Beebe <beebe@math.utah.edu>
+-
+- * cat-compat.c (bindtextdomain): Add missing { }.
+-
+-Sun Nov 26 18:21:41 1995 Ulrich Drepper <drepper@myware>
+-
+- * libintl.inst: Add missing __P definition. Reported by Nelson Beebe.
+-
+- * Makefile.in:
+- Add dummy `all' and `dvi' goals. Reported by Tom Tromey.
+-
+-Sat Nov 25 16:12:01 1995 Franc,ois Pinard <pinard@iro.umontreal.ca>
+-
+- * hash-string.h: Capitalize arguments of macros.
+-
+-Sat Nov 25 12:01:36 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (DISTFILES): Prevent files names longer than 13
+- characters. libintl.h.glibc->libintl.glibc,
+- libintl.h.install->libintl.inst. Reported by Joshua R. Poulson.
+-
+-Sat Nov 25 11:31:12 1995 Eric Backus <ericb@lsid.hp.com>
+-
+- * dcgettext.c: Fix bug in preprocessor conditionals.
+-
+-Sat Nov 25 02:35:27 1995 Nelson H. F. Beebe <beebe@math.utah.edu>
+-
+- * libgettext.h: Solaris cc does not understand
+- #if !SYMBOL1 && !SYMBOL2. Sad but true.
+-
+-Thu Nov 23 16:22:14 1995 Ulrich Drepper <drepper@myware>
+-
+- * hash-string.h (hash_string):
+- Fix for machine with >32 bit `unsigned long's.
+-
+- * dcgettext.c (DCGETTEXT):
+- Fix horrible bug in loop for alternative translation.
+-
+-Thu Nov 23 01:45:29 1995 Ulrich Drepper <drepper@myware>
+-
+- * po2tbl.sed.in, linux-msg.sed, xopen-msg.sed:
+- Some further simplifications in message number generation.
+-
+-Mon Nov 20 21:08:43 1995 Ulrich Drepper <drepper@myware>
+-
+- * libintl.h.glibc: Use __const instead of const in prototypes.
+-
+- * Makefile.in (install-src):
+- Install libintl.h.install instead of libintl.h. This
+- is a stripped-down version. Suggested by Peter Miller.
+-
+- * libintl.h.install, libintl.h.glibc: Initial revision.
+-
+- * localealias.c (_nl_expand_alias, read_alias_file):
+- Protect prototypes in type casts by __P.
+-
+-Tue Nov 14 16:43:58 1995 Ulrich Drepper <drepper@myware>
+-
+- * hash-string.h: Correct prototype for hash_string.
+-
+-Sun Nov 12 12:42:30 1995 Ulrich Drepper <drepper@myware>
+-
+- * hash-string.h (hash_string): Add prototype.
+-
+- * gettextP.h: Fix copyright.
+- (SWAP): Add prototype.
+-
+-Wed Nov 8 22:56:33 1995 Ulrich Drepper <drepper@myware>
+-
+- * localealias.c (read_alias_file): Forgot sizeof.
+- Avoid calling *printf function. This introduces a big overhead.
+- Patch by Roland McGrath.
+-
+-Tue Nov 7 14:21:08 1995 Ulrich Drepper <drepper@myware>
+-
+- * finddomain.c, cat-compat.c: Wrong indentation in #if for stpcpy.
+-
+- * finddomain.c (stpcpy):
+- Define substitution function local. The macro was to flaky.
+-
+- * cat-compat.c: Fix typo.
+-
+- * xopen-msg.sed, linux-msg.sed:
+- While bringing message number to right place only accept digits.
+-
+- * linux-msg.sed, xopen-msg.sed: Now that the counter does not have
+- leading 0s we don't need to remove them. Reported by Marcus
+- Daniels.
+-
+- * Makefile.in (../po/cat-id-tbl.o): Use $(top_srdir) in
+- dependency. Reported by Marcus Daniels.
+-
+- * cat-compat.c: (stpcpy) [!_LIBC && !HAVE_STPCPY]: Define replacement.
+- Generally cleanup using #if instead of #ifndef.
+-
+- * Makefile.in: Correct typos in comment. By Franc,ois Pinard.
+-
+-Mon Nov 6 00:27:02 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (install-src): Don't install libintl.h and libintl.a
+- if we use an available gettext implementation.
+-
+-Sun Nov 5 22:02:08 1995 Ulrich Drepper <drepper@myware>
+-
+- * libgettext.h: Fix typo: HAVE_CATGETTS -> HAVE_CATGETS. Reported
+- by Franc,ois Pinard.
+-
+- * libgettext.h: Use #if instead of #ifdef/#ifndef.
+-
+- * finddomain.c:
+- Comments describing what has to be done should start with FIXME.
+-
+-Sun Nov 5 19:38:01 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (DISTFILES): Split. Use DISTFILES with normal meaning.
+- DISTFILES.common names the files common to both dist goals.
+- DISTFILES.gettext are the files only distributed in GNU gettext.
+-
+-Sun Nov 5 17:32:54 1995 Ulrich Drepper <drepper@myware>
+-
+- * dcgettext.c (DCGETTEXT): Correct searching in derived locales.
+- This was necessary since a change in _nl_find_msg several weeks
+- ago. I really don't know this is still not fixed.
+-
+-Sun Nov 5 12:43:12 1995 Ulrich Drepper <drepper@myware>
+-
+- * loadmsgcat.c (_nl_load_domain): Test for FILENAME == NULL. This
+- might mark a special condition.
+-
+- * finddomain.c (make_entry_rec): Don't make illegal entry as decided.
+-
+- * Makefile.in (dist): Suppress error message when ln failed.
+- Get files from $(srcdir) explicitly.
+-
+- * libgettext.h (gettext_const): Rename to gettext_noop.
+-
+-Fri Nov 3 07:36:50 1995 Ulrich Drepper <drepper@myware>
+-
+- * finddomain.c (make_entry_rec):
+- Protect against wrong locale names by testing mask.
+-
+- * libgettext.h (gettext_const): Add macro definition.
+- Capitalize macro arguments.
+-
+-Thu Nov 2 23:15:51 1995 Ulrich Drepper <drepper@myware>
+-
+- * finddomain.c (_nl_find_domain):
+- Test for pointer != NULL before accessing value.
+- Reported by Tom Tromey.
+-
+- * gettext.c (NULL):
+- Define as (void*)0 instad of 0. Reported by Franc,ois Pinard.
+-
+-Mon Oct 30 21:28:52 1995 Ulrich Drepper <drepper@myware>
+-
+- * po2tbl.sed.in: Serious typo bug fixed by Jim Meyering.
+-
+-Sat Oct 28 23:20:47 1995 Ulrich Drepper <drepper@myware>
+-
+- * libgettext.h: Disable dcgettext optimization for Solaris 2.3.
+-
+- * localealias.c (alias_compare):
+- Peter Miller reported that tolower in some systems is
+- even dumber than I thought. Protect call by `isupper'.
+-
+-Fri Oct 27 22:22:51 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (libdir, includedir): New variables.
+- (install-src): Install libintl.a and libintl.h in correct dirs.
+-
+-Fri Oct 27 22:07:29 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (SOURCES): Fix typo: intrl.compat.c -> intl-compat.c.
+-
+- * po2tbl.sed.in: Patch for buggy SEDs by Christian von Roques.
+-
+- * localealias.c:
+- Fix typo and superflous test. Reported by Christian von Roques.
+-
+-Fri Oct 6 11:52:05 1995 Ulrich Drepper <drepper@myware>
+-
+- * finddomain.c (_nl_find_domain):
+- Correct some remainder from the pre-CEN syntax. Now
+- we don't have a constant number of successors anymore.
+-
+-Wed Sep 27 21:41:13 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (DISTFILES): Add libintl.h.glibc.
+-
+- * Makefile.in (dist-libc): Add goal for packing sources for glibc.
+- (COMSRCS, COMHDRS): Splitted to separate sources shared with glibc.
+-
+- * loadmsgcat.c: Forget to continue #if line.
+-
+- * localealias.c:
+- [_LIBC]: Rename strcasecmp to __strcasecmp to keep ANSI C name
+- space clean.
+-
+- * dcgettext.c, finddomain.c: Better comment to last change.
+-
+- * loadmsgcat.c:
+- [_LIBC]: Rename fstat, open, close, read, mmap, and munmap to
+- __fstat, __open, __close, __read, __mmap, and __munmap resp
+- to keep ANSI C name space clean.
+-
+- * finddomain.c:
+- [_LIBC]: Rename stpcpy to __stpcpy to keep ANSI C name space clean.
+-
+- * dcgettext.c:
+- [_LIBC]: Rename getced and stpcpy to __getcwd and __stpcpy resp to
+- keep ANSI C name space clean.
+-
+- * libgettext.h:
+- Include sys/types.h for those old SysV systems out there.
+- Reported by Francesco Potorti`.
+-
+- * loadmsgcat.c (use_mmap): Define if compiled for glibc.
+-
+- * bindtextdom.c: Include all those standard headers
+- unconditionally if _LIBC is defined.
+-
+- * finddomain.c: Fix 2 times defiend -> defined.
+-
+- * textdomain.c: Include libintl.h instead of libgettext.h when
+- compiling for glibc. Include all those standard headers
+- unconditionally if _LIBC is defined.
+-
+- * localealias.c, loadmsgcat.c: Prepare to be compiled in glibc.
+-
+- * gettext.c:
+- Include libintl.h instead of libgettext.h when compiling for glibc.
+- Get NULL from stddef.h if we compile for glibc.
+-
+- * finddomain.c: Include libintl.h instead of libgettext.h when
+- compiling for glibc. Include all those standard headers
+- unconditionally if _LIBC is defined.
+-
+- * dcgettext.c: Include all those standard headers unconditionally
+- if _LIBC is defined.
+-
+- * dgettext.c: If compiled in glibc include libintl.h instead of
+- libgettext.h.
+- (locale.h): Don't rely on HAVE_LOCALE_H when compiling for glibc.
+-
+- * dcgettext.c: If compiled in glibc include libintl.h instead of
+- libgettext.h.
+- (getcwd): Don't rely on HAVE_GETCWD when compiling for glibc.
+-
+- * bindtextdom.c:
+- If compiled in glibc include libintl.h instead of libgettext.h.
+-
+-Mon Sep 25 22:23:06 1995 Ulrich Drepper <drepper@myware>
+-
+- * localealias.c (_nl_expand_alias): Don't call bsearch if NMAP <= 0.
+- Reported by Marcus Daniels.
+-
+- * cat-compat.c (bindtextdomain):
+- String used in putenv must not be recycled.
+- Reported by Marcus Daniels.
+-
+- * libgettext.h (__USE_GNU_GETTEXT):
+- Additional symbol to signal that we use GNU gettext
+- library.
+-
+- * cat-compat.c (bindtextdomain):
+- Fix bug with the strange stpcpy replacement.
+- Reported by Nelson Beebe.
+-
+-Sat Sep 23 08:23:51 1995 Ulrich Drepper <drepper@myware>
+-
+- * cat-compat.c: Include <string.h> for stpcpy prototype.
+-
+- * localealias.c (read_alias_file):
+- While expand strdup code temporary variable `cp' hided
+- higher level variable with same name. Rename to `tp'.
+-
+- * textdomain.c (textdomain):
+- Avoid warning by using temporary variable in strdup code.
+-
+- * finddomain.c (_nl_find_domain): Remove unused variable `application'.
+-
+-Thu Sep 21 15:51:44 1995 Ulrich Drepper <drepper@myware>
+-
+- * localealias.c (alias_compare):
+- Use strcasecmp() only if available. Else use
+- implementation in place.
+-
+- * intl-compat.c:
+- Wrapper functions now call *__ functions instead of __*.
+-
+- * libgettext.h: Declare prototypes for *__ functions instead for __*.
+-
+- * cat-compat.c, loadmsgcat.c:
+- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part
+- of the standard libc and so prevent libintl.a from being used
+- standalone.
+-
+- * bindtextdom.c:
+- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part
+- of the standard libc and so prevent libintl.a from being used
+- standalone.
+- Rename to bindtextdomain__ if not used in GNU C Library.
+-
+- * dgettext.c:
+- Rename function to dgettext__ if not used in GNU C Library.
+-
+- * gettext.c:
+- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part
+- of the standard libc and so prevent libintl.a from being used
+- standalone.
+- Functions now called gettext__ if not used in GNU C Library.
+-
+- * dcgettext.c, localealias.c, textdomain.c, finddomain.c:
+- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part
+- of the standard libc and so prevent libintl.a from being used
+- standalone.
+-
+-Sun Sep 17 23:14:49 1995 Ulrich Drepper <drepper@myware>
+-
+- * finddomain.c: Correct some bugs in handling of CEN standard
+- locale definitions.
+-
+-Thu Sep 7 01:49:28 1995 Ulrich Drepper <drepper@myware>
+-
+- * finddomain.c: Implement CEN syntax.
+-
+- * gettextP.h (loaded_domain): Extend number of successors to 31.
+-
+-Sat Aug 19 19:25:29 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (aliaspath): Remove path to X11 locale dir.
+-
+- * Makefile.in: Make install-src depend on install. This helps
+- gettext to install the sources and other packages can use the
+- install goal.
+-
+-Sat Aug 19 15:19:33 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (uninstall): Remove stuff installed by install-src.
+-
+-Tue Aug 15 13:13:53 1995 Ulrich Drepper <drepper@myware>
+-
+- * VERSION.in: Initial revision.
+-
+- * Makefile.in (DISTFILES):
+- Add VERSION file. This is not necessary for gettext, but
+- for other packages using this library.
+-
+-Tue Aug 15 06:16:44 1995 Ulrich Drepper <drepper@myware>
+-
+- * gettextP.h (_nl_find_domain):
+- New prototype after changing search strategy.
+-
+- * finddomain.c (_nl_find_domain):
+- We now try only to find a specified catalog. Fall back to other
+- catalogs listed in the locale list is now done in __dcgettext.
+-
+- * dcgettext.c (__dcgettext):
+- Now we provide message fall back even to different languages.
+- I.e. if a message is not available in one language all the other
+- in the locale list a tried. Formerly fall back was only possible
+- within one language. Implemented by moving one loop from
+- _nl_find_domain to here.
+-
+-Mon Aug 14 23:45:50 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (gettextsrcdir):
+- Directory where source of GNU gettext library are made
+- available.
+- (INSTALL, INSTALL_DATA): Programs used for installing sources.
+- (gettext-src): New. Rule to install GNU gettext sources for use in
+- gettextize shell script.
+-
+-Sun Aug 13 14:40:48 1995 Ulrich Drepper <drepper@myware>
+-
+- * loadmsgcat.c (_nl_load_domain):
+- Use mmap for loading only when munmap function is
+- also available.
+-
+- * Makefile.in (install): Depend on `all' goal.
+-
+-Wed Aug 9 11:04:33 1995 Ulrich Drepper <drepper@myware>
+-
+- * localealias.c (read_alias_file):
+- Do not overwrite '\n' when terminating alias value string.
+-
+- * localealias.c (read_alias_file):
+- Handle long lines. Ignore the rest not fitting in
+- the buffer after the initial `fgets' call.
+-
+-Wed Aug 9 00:54:29 1995 Ulrich Drepper <drepper@myware>
+-
+- * gettextP.h (_nl_load_domain):
+- Add prototype, replacing prototype for _nl_load_msg_cat.
+-
+- * finddomain.c (_nl_find_domain):
+- Remove unneeded variable filename and filename_len.
+- (expand_alias): Remove prototype because functions does not
+- exist anymore.
+-
+- * localealias.c (read_alias_file):
+- Change type of fname_len parameter to int.
+- (xmalloc): Add prototype.
+-
+- * loadmsgcat.c: Better prototypes for xmalloc.
+-
+-Tue Aug 8 22:30:39 1995 Ulrich Drepper <drepper@myware>
+-
+- * finddomain.c (_nl_find_domain):
+- Allow alias name to be constructed from the four components.
+-
+- * Makefile.in (aliaspath): New variable. Set to preliminary value.
+- (SOURCES): Add localealias.c.
+- (OBJECTS): Add localealias.o.
+-
+- * gettextP.h: Add prototype for _nl_expand_alias.
+-
+- * finddomain.c: Aliasing handled in intl/localealias.c.
+-
+- * localealias.c: Aliasing for locale names.
+-
+- * bindtextdom.c: Better prototypes for xmalloc and xstrdup.
+-
+-Mon Aug 7 23:47:42 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (DISTFILES): gettext.perl is now found in misc/.
+-
+- * cat-compat.c (bindtextdomain):
+- Correct implementation. dirname parameter was not used.
+- Reported by Marcus Daniels.
+-
+- * gettextP.h (loaded_domain):
+- New fields `successor' and `decided' for oo, lazy
+- message handling implementation.
+-
+- * dcgettext.c:
+- Adopt for oo, lazy message handliing.
+- Now we can inherit translations from less specific locales.
+- (find_msg): New function.
+-
+- * loadmsgcat.c, finddomain.c:
+- Complete rewrite. Implement oo, lazy message handling :-).
+- We now have an additional environment variable `LANGUAGE' with
+- a higher priority than LC_ALL for the LC_MESSAGE locale.
+- Here we can set a colon separated list of specifications each
+- of the form `language[_territory[.codeset]][@modifier]'.
+-
+-Sat Aug 5 09:55:42 1995 Ulrich Drepper <drepper@myware>
+-
+- * finddomain.c (unistd.h):
+- Include to get _PC_PATH_MAX defined on system having it.
+-
+-Fri Aug 4 22:42:00 1995 Ulrich Drepper <drepper@myware>
+-
+- * finddomain.c (stpcpy): Include prototype.
+-
+- * Makefile.in (dist): Remove `copying instead' message.
+-
+-Wed Aug 2 18:52:03 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (ID, TAGS): Do not use $^.
+-
+-Tue Aug 1 20:07:11 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (TAGS, ID): Use $^ as command argument.
+- (TAGS): Give etags -o option t write to current directory,
+- not $(srcdir).
+- (ID): Use $(srcdir) instead os $(top_srcdir)/src.
+- (distclean): Remove ID.
+-
+-Sun Jul 30 11:51:46 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (gnulocaledir):
+- New variable, always using share/ for data directory.
+- (DEFS): Add GNULOCALEDIR, used in finddomain.c.
+-
+- * finddomain.c (_nl_default_dirname):
+- Set to GNULOCALEDIR, because it always has to point
+- to the directory where GNU gettext Library writes it to.
+-
+- * intl-compat.c (textdomain, bindtextdomain):
+- Undefine macros before function definition.
+-
+-Sat Jul 22 01:10:02 1995 Ulrich Drepper <drepper@myware>
+-
+- * libgettext.h (_LIBINTL_H):
+- Protect definition in case where this file is included as
+- libgettext.h on Solaris machines. Add comment about this.
+-
+-Wed Jul 19 02:36:42 1995 Ulrich Drepper <drepper@myware>
+-
+- * intl-compat.c (textdomain): Correct typo.
+-
+-Wed Jul 19 01:51:35 1995 Ulrich Drepper <drepper@myware>
+-
+- * dcgettext.c (dcgettext): Function now called __dcgettext.
+-
+- * dgettext.c (dgettext): Now called __dgettext and calls
+- __dcgettext.
+-
+- * gettext.c (gettext):
+- Function now called __gettext and calls __dgettext.
+-
+- * textdomain.c (textdomain): Function now called __textdomain.
+-
+- * bindtextdom.c (bindtextdomain): Function now called
+- __bindtextdomain.
+-
+- * intl-compat.c: Initial revision.
+-
+- * Makefile.in (SOURCES): Add intl-compat.c.
+- (OBJECTS): We always compile the GNU gettext library functions.
+- OBJECTS contains all objects but cat-compat.o, ../po/cat-if-tbl.o,
+- and intl-compat.o.
+- (GETTOBJS): Contains now only intl-compat.o.
+-
+- * libgettext.h:
+- Re-include protection matches dualistic character of libgettext.h.
+- For all functions in GNU gettext library define __ counter part.
+-
+- * finddomain.c (strchr): Define as index if not found in C library.
+- (_nl_find_domain): For relative paths paste / in between.
+-
+-Tue Jul 18 16:37:45 1995 Ulrich Drepper <drepper@myware>
+-
+- * loadmsgcat.c, finddomain.c: Add inclusion of sys/types.h.
+-
+- * xopen-msg.sed: Fix bug with `msgstr ""' lines.
+- A little bit better comments.
+-
+-Tue Jul 18 01:18:27 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in:
+- po-mode.el, makelinks, combine-sh are now found in ../misc.
+-
+- * po-mode.el, makelinks, combine-sh, elisp-comp:
+- Moved to ../misc/.
+-
+- * libgettext.h, gettextP.h, gettext.h: Uniform test for __STDC__.
+-
+-Sun Jul 16 22:33:02 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (INSTALL, INSTALL_DATA): New variables.
+- (install-data, uninstall): Install/uninstall .elc file.
+-
+- * po-mode.el (Installation comment):
+- Add .pox as possible extension of .po files.
+-
+-Sun Jul 16 13:23:27 1995 Ulrich Drepper <drepper@myware>
+-
+- * elisp-comp: Complete new version by Franc,ois: This does not
+- fail when not compiling in the source directory.
+-
+-Sun Jul 16 00:12:17 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (../po/cat-id-tbl.o):
+- Use $(MAKE) instead of make for recursive make.
+-
+- * Makefile.in (.el.elc): Use $(SHELL) instead of /bin/sh.
+- (install-exec): Add missing dummy goal.
+- (install-data, uninstall): @ in multi-line shell command at
+- beginning, not in front of echo. Reported by Eric Backus.
+-
+-Sat Jul 15 00:21:28 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (DISTFILES):
+- Rename libgettext.perl to gettext.perl to fit in 14 chars
+- file systems.
+-
+- * gettext.perl:
+- Rename to gettext.perl to fit in 14 chars file systems.
+-
+-Thu Jul 13 23:17:20 1995 Ulrich Drepper <drepper@myware>
+-
+- * cat-compat.c: If !STDC_HEADERS try to include malloc.h.
+-
+-Thu Jul 13 20:55:02 1995 Ulrich Drepper <drepper@myware>
+-
+- * po2tbl.sed.in: Pretty printing.
+-
+- * linux-msg.sed, xopen-msg.sed:
+- Correct bugs with handling substitute flags in branches.
+-
+- * hash-string.h (hash_string):
+- Old K&R compilers don't under stand `unsigned char'.
+-
+- * gettext.h (nls_uint32):
+- Some old K&R compilers (eg HP) don't understand `unsigned int'.
+-
+- * cat-compat.c (msg_to_cat_id): De-ANSI-fy prototypes.
+-
+-Thu Jul 13 01:34:33 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (ELCFILES): New variable.
+- (DISTFILES): Add elisp-comp.
+- Add implicit rule for .el -> .elc compilation.
+- (install-data): install $ELCFILES
+- (clean): renamed po-to-tbl and po-to-msg to po2tbl and po2msg resp.
+-
+- * elisp-comp: Initial revision
+-
+-Wed Jul 12 16:14:52 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in:
+- cat-id-tbl.c is now found in po/. This enables us to use an identical
+- intl/ directory in all packages.
+-
+- * dcgettext.c (dcgettext): hashing does not work for table size <= 2.
+-
+- * textdomain.c: fix typo (#if def -> #if defined)
+-
+-Tue Jul 11 18:44:43 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in (stamp-cat-id): use top_srcdir to address source files
+- (DISTFILES,distclean): move tupdate.perl to src/
+-
+- * po-to-tbl.sed.in:
+- add additional jump to clear change flag to recognize multiline strings
+-
+-Tue Jul 11 01:32:50 1995 Ulrich Drepper <drepper@myware>
+-
+- * textdomain.c: Protect inclusion of stdlib.h and string.h.
+-
+- * loadmsgcat.c: Protect inclusion of stdlib.h.
+-
+- * libgettext.h: Protect inclusion of locale.h.
+- Allow use in C++ programs.
+- Define NULL is not happened already.
+-
+- * Makefile.in (DISTFILES): ship po-to-tbl.sed.in instead of
+- po-to-tbl.sed.
+- (distclean): remove po-to-tbl.sed and tupdate.perl.
+-
+- * tupdate.perl.in: Substitute Perl path even in exec line.
+- Don't include entries without translation from old .po file.
+-
+-Tue Jul 4 00:41:51 1995 Ulrich Drepper <drepper@myware>
+-
+- * tupdate.perl.in: use "Updated: " in msgid "".
+-
+- * cat-compat.c: Fix typo (LOCALDIR -> LOCALEDIR).
+- Define getenv if !__STDC__.
+-
+- * bindtextdom.c: Protect stdlib.h and string.h inclusion.
+- Define free if !__STDC__.
+-
+- * finddomain.c: Change DEF_MSG_DOM_DIR to LOCALEDIR.
+- Define free if !__STDC__.
+-
+- * cat-compat.c: Change DEF_MSG_DOM_DIR to LOCALEDIR.
+-
+-Mon Jul 3 23:56:30 1995 Ulrich Drepper <drepper@myware>
+-
+- * Makefile.in: Use LOCALEDIR instead of DEF_MSG_DOM_DIR.
+- Remove unneeded $(srcdir) from Makefile.in dependency.
+-
+- * makelinks: Add copyright and short description.
+-
+- * po-mode.el: Last version for 0.7.
+-
+- * tupdate.perl.in: Fix die message.
+-
+- * dcgettext.c: Protect include of string.h.
+-
+- * gettext.c: Protect include of stdlib.h and further tries to get NULL.
+-
+- * finddomain.c: Some corrections in includes.
+-
+- * Makefile.in (INCLUDES): Prune list correct path to Makefile.in.
+-
+- * po-to-tbl.sed: Adopt for new .po file format.
+-
+- * linux-msg.sed, xopen-msg.sed: Adopt for new .po file format.
+-
+-Sun Jul 2 23:55:03 1995 Ulrich Drepper <drepper@myware>
+-
+- * tupdate.perl.in: Complete rewrite for new .po file format.
+-
+-Sun Jul 2 02:06:50 1995 Ulrich Drepper <drepper@myware>
+-
+- * First official release. This directory contains all the code
+- needed to internationalize own packages. It provides functions
+- which allow to use the X/Open catgets function with an interface
+- like the Uniforum gettext function. For system which does not
+- have neither of those a complete implementation is provided.
+diff -uprN clean/lrzsz-0.12.20/intl/dcgettext.c lrzsz-0.12.20/intl/dcgettext.c
+--- clean/lrzsz-0.12.20/intl/dcgettext.c 1998-04-26 14:22:36.000000000 +0100
++++ lrzsz-0.12.20/intl/dcgettext.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,593 +0,0 @@
+-/* Implementation of the dcgettext(3) function
+- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software Foundation,
+- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+-
+-#ifdef HAVE_CONFIG_H
+-# include <config.h>
+-#endif
+-
+-#include <sys/types.h>
+-
+-#ifdef __GNUC__
+-# define alloca __builtin_alloca
+-# define HAVE_ALLOCA 1
+-#else
+-# if defined HAVE_ALLOCA_H || defined _LIBC
+-# include <alloca.h>
+-# else
+-# ifdef _AIX
+- #pragma alloca
+-# else
+-# ifndef alloca
+-char *alloca ();
+-# endif
+-# endif
+-# endif
+-#endif
+-
+-#include <errno.h>
+-#ifndef errno
+-extern int errno;
+-#endif
+-#ifndef __set_errno
+-# define __set_errno(val) errno = (val)
+-#endif
+-
+-#if defined STDC_HEADERS || defined _LIBC
+-# include <stdlib.h>
+-#else
+-char *getenv ();
+-# ifdef HAVE_MALLOC_H
+-# include <malloc.h>
+-# else
+-void free ();
+-# endif
+-#endif
+-
+-#if defined HAVE_STRING_H || defined _LIBC
+-# ifndef _GNU_SOURCE
+-# define _GNU_SOURCE 1
+-# endif
+-# include <string.h>
+-#else
+-# include <strings.h>
+-#endif
+-#if !HAVE_STRCHR && !defined _LIBC
+-# ifndef strchr
+-# define strchr index
+-# endif
+-#endif
+-
+-#if defined HAVE_UNISTD_H || defined _LIBC
+-# include <unistd.h>
+-#endif
+-
+-#include "gettext.h"
+-#include "gettextP.h"
+-#ifdef _LIBC
+-# include <libintl.h>
+-#else
+-# include "libgettext.h"
+-#endif
+-#include "hash-string.h"
+-
+-/* @@ end of prolog @@ */
+-
+-#ifdef _LIBC
+-/* Rename the non ANSI C functions. This is required by the standard
+- because some ANSI C functions will require linking with this object
+- file and the name space must not be polluted. */
+-# define getcwd __getcwd
+-# define stpcpy __stpcpy
+-#else
+-# if !defined HAVE_GETCWD
+-char *getwd ();
+-# define getcwd(buf, max) getwd (buf)
+-# else
+-char *getcwd ();
+-# endif
+-# ifndef HAVE_STPCPY
+-static char *stpcpy PARAMS ((char *dest, const char *src));
+-# endif
+-#endif
+-
+-/* Amount to increase buffer size by in each try. */
+-#define PATH_INCR 32
+-
+-/* The following is from pathmax.h. */
+-/* Non-POSIX BSD systems might have gcc's limits.h, which doesn't define
+- PATH_MAX but might cause redefinition warnings when sys/param.h is
+- later included (as on MORE/BSD 4.3). */
+-#if defined(_POSIX_VERSION) || (defined(HAVE_LIMITS_H) && !defined(__GNUC__))
+-# include <limits.h>
+-#endif
+-
+-#ifndef _POSIX_PATH_MAX
+-# define _POSIX_PATH_MAX 255
+-#endif
+-
+-#if !defined(PATH_MAX) && defined(_PC_PATH_MAX)
+-# define PATH_MAX (pathconf ("/", _PC_PATH_MAX) < 1 ? 1024 : pathconf ("/", _PC_PATH_MAX))
+-#endif
+-
+-/* Don't include sys/param.h if it already has been. */
+-#if defined(HAVE_SYS_PARAM_H) && !defined(PATH_MAX) && !defined(MAXPATHLEN)
+-# include <sys/param.h>
+-#endif
+-
+-#if !defined(PATH_MAX) && defined(MAXPATHLEN)
+-# define PATH_MAX MAXPATHLEN
+-#endif
+-
+-#ifndef PATH_MAX
+-# define PATH_MAX _POSIX_PATH_MAX
+-#endif
+-
+-/* XPG3 defines the result of `setlocale (category, NULL)' as:
+- ``Directs `setlocale()' to query `category' and return the current
+- setting of `local'.''
+- However it does not specify the exact format. And even worse: POSIX
+- defines this not at all. So we can use this feature only on selected
+- system (e.g. those using GNU C Library). */
+-#ifdef _LIBC
+-# define HAVE_LOCALE_NULL
+-#endif
+-
+-/* Name of the default domain used for gettext(3) prior any call to
+- textdomain(3). The default value for this is "messages". */
+-const char _nl_default_default_domain[] = "messages";
+-
+-/* Value used as the default domain for gettext(3). */
+-const char *_nl_current_default_domain = _nl_default_default_domain;
+-
+-/* Contains the default location of the message catalogs. */
+-const char _nl_default_dirname[] = GNULOCALEDIR;
+-
+-/* List with bindings of specific domains created by bindtextdomain()
+- calls. */
+-struct binding *_nl_domain_bindings;
+-
+-/* Prototypes for local functions. */
+-static char *find_msg PARAMS ((struct loaded_l10nfile *domain_file,
+- const char *msgid));
+-static const char *category_to_name PARAMS ((int category));
+-static const char *guess_category_value PARAMS ((int category,
+- const char *categoryname));
+-
+-
+-/* For those loosing systems which don't have `alloca' we have to add
+- some additional code emulating it. */
+-#ifdef HAVE_ALLOCA
+-/* Nothing has to be done. */
+-# define ADD_BLOCK(list, address) /* nothing */
+-# define FREE_BLOCKS(list) /* nothing */
+-#else
+-struct block_list
+-{
+- void *address;
+- struct block_list *next;
+-};
+-# define ADD_BLOCK(list, addr) \
+- do { \
+- struct block_list *newp = (struct block_list *) malloc (sizeof (*newp)); \
+- /* If we cannot get a free block we cannot add the new element to \
+- the list. */ \
+- if (newp != NULL) { \
+- newp->address = (addr); \
+- newp->next = (list); \
+- (list) = newp; \
+- } \
+- } while (0)
+-# define FREE_BLOCKS(list) \
+- do { \
+- while (list != NULL) { \
+- struct block_list *old = list; \
+- list = list->next; \
+- free (old); \
+- } \
+- } while (0)
+-# undef alloca
+-# define alloca(size) (malloc (size))
+-#endif /* have alloca */
+-
+-
+-/* Names for the libintl functions are a problem. They must not clash
+- with existing names and they should follow ANSI C. But this source
+- code is also used in GNU C Library where the names have a __
+- prefix. So we have to make a difference here. */
+-#ifdef _LIBC
+-# define DCGETTEXT __dcgettext
+-#else
+-# define DCGETTEXT dcgettext__
+-#endif
+-
+-/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
+- locale. */
+-char *
+-DCGETTEXT (domainname, msgid, category)
+- const char *domainname;
+- const char *msgid;
+- int category;
+-{
+-#ifndef HAVE_ALLOCA
+- struct block_list *block_list = NULL;
+-#endif
+- struct loaded_l10nfile *domain;
+- struct binding *binding;
+- const char *categoryname;
+- const char *categoryvalue;
+- char *dirname, *xdomainname;
+- char *single_locale;
+- char *retval;
+- int saved_errno = errno;
+-
+- /* If no real MSGID is given return NULL. */
+- if (msgid == NULL)
+- return NULL;
+-
+- /* If DOMAINNAME is NULL, we are interested in the default domain. If
+- CATEGORY is not LC_MESSAGES this might not make much sense but the
+- defintion left this undefined. */
+- if (domainname == NULL)
+- domainname = _nl_current_default_domain;
+-
+- /* First find matching binding. */
+- for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
+- {
+- int compare = strcmp (domainname, binding->domainname);
+- if (compare == 0)
+- /* We found it! */
+- break;
+- if (compare < 0)
+- {
+- /* It is not in the list. */
+- binding = NULL;
+- break;
+- }
+- }
+-
+- if (binding == NULL)
+- dirname = (char *) _nl_default_dirname;
+- else if (binding->dirname[0] == '/')
+- dirname = binding->dirname;
+- else
+- {
+- /* We have a relative path. Make it absolute now. */
+- size_t dirname_len = strlen (binding->dirname) + 1;
+- size_t path_max;
+- char *ret;
+-
+- path_max = (unsigned) PATH_MAX;
+- path_max += 2; /* The getcwd docs say to do this. */
+-
+- dirname = (char *) alloca (path_max + dirname_len);
+- ADD_BLOCK (block_list, dirname);
+-
+- __set_errno (0);
+- while ((ret = getcwd (dirname, path_max)) == NULL && errno == ERANGE)
+- {
+- path_max += PATH_INCR;
+- dirname = (char *) alloca (path_max + dirname_len);
+- ADD_BLOCK (block_list, dirname);
+- __set_errno (0);
+- }
+-
+- if (ret == NULL)
+- {
+- /* We cannot get the current working directory. Don't signal an
+- error but simply return the default string. */
+- FREE_BLOCKS (block_list);
+- __set_errno (saved_errno);
+- return (char *) msgid;
+- }
+-
+- stpcpy (stpcpy (strchr (dirname, '\0'), "/"), binding->dirname);
+- }
+-
+- /* Now determine the symbolic name of CATEGORY and its value. */
+- categoryname = category_to_name (category);
+- categoryvalue = guess_category_value (category, categoryname);
+-
+- xdomainname = (char *) alloca (strlen (categoryname)
+- + strlen (domainname) + 5);
+- ADD_BLOCK (block_list, xdomainname);
+-
+- stpcpy (stpcpy (stpcpy (stpcpy (xdomainname, categoryname), "/"),
+- domainname),
+- ".mo");
+-
+- /* Creating working area. */
+- single_locale = (char *) alloca (strlen (categoryvalue) + 1);
+- ADD_BLOCK (block_list, single_locale);
+-
+-
+- /* Search for the given string. This is a loop because we perhaps
+- got an ordered list of languages to consider for th translation. */
+- while (1)
+- {
+- /* Make CATEGORYVALUE point to the next element of the list. */
+- while (categoryvalue[0] != '\0' && categoryvalue[0] == ':')
+- ++categoryvalue;
+- if (categoryvalue[0] == '\0')
+- {
+- /* The whole contents of CATEGORYVALUE has been searched but
+- no valid entry has been found. We solve this situation
+- by implicitly appending a "C" entry, i.e. no translation
+- will take place. */
+- single_locale[0] = 'C';
+- single_locale[1] = '\0';
+- }
+- else
+- {
+- char *cp = single_locale;
+- while (categoryvalue[0] != '\0' && categoryvalue[0] != ':')
+- *cp++ = *categoryvalue++;
+- *cp = '\0';
+- }
+-
+- /* If the current locale value is C (or POSIX) we don't load a
+- domain. Return the MSGID. */
+- if (strcmp (single_locale, "C") == 0
+- || strcmp (single_locale, "POSIX") == 0)
+- {
+- FREE_BLOCKS (block_list);
+- __set_errno (saved_errno);
+- return (char *) msgid;
+- }
+-
+-
+- /* Find structure describing the message catalog matching the
+- DOMAINNAME and CATEGORY. */
+- domain = _nl_find_domain (dirname, single_locale, xdomainname);
+-
+- if (domain != NULL)
+- {
+- retval = find_msg (domain, msgid);
+-
+- if (retval == NULL)
+- {
+- int cnt;
+-
+- for (cnt = 0; domain->successor[cnt] != NULL; ++cnt)
+- {
+- retval = find_msg (domain->successor[cnt], msgid);
+-
+- if (retval != NULL)
+- break;
+- }
+- }
+-
+- if (retval != NULL)
+- {
+- FREE_BLOCKS (block_list);
+- __set_errno (saved_errno);
+- return retval;
+- }
+- }
+- }
+- /* NOTREACHED */
+-}
+-
+-#ifdef _LIBC
+-/* Alias for function name in GNU C Library. */
+-weak_alias (__dcgettext, dcgettext);
+-#endif
+-
+-
+-static char *
+-find_msg (domain_file, msgid)
+- struct loaded_l10nfile *domain_file;
+- const char *msgid;
+-{
+- size_t top, act, bottom;
+- struct loaded_domain *domain;
+-
+- if (domain_file->decided == 0)
+- _nl_load_domain (domain_file);
+-
+- if (domain_file->data == NULL)
+- return NULL;
+-
+- domain = (struct loaded_domain *) domain_file->data;
+-
+- /* Locate the MSGID and its translation. */
+- if (domain->hash_size > 2 && domain->hash_tab != NULL)
+- {
+- /* Use the hashing table. */
+- nls_uint32 len = strlen (msgid);
+- nls_uint32 hash_val = hash_string (msgid);
+- nls_uint32 idx = hash_val % domain->hash_size;
+- nls_uint32 incr = 1 + (hash_val % (domain->hash_size - 2));
+- nls_uint32 nstr = W (domain->must_swap, domain->hash_tab[idx]);
+-
+- if (nstr == 0)
+- /* Hash table entry is empty. */
+- return NULL;
+-
+- if (W (domain->must_swap, domain->orig_tab[nstr - 1].length) == len
+- && strcmp (msgid,
+- domain->data + W (domain->must_swap,
+- domain->orig_tab[nstr - 1].offset)) == 0)
+- return (char *) domain->data + W (domain->must_swap,
+- domain->trans_tab[nstr - 1].offset);
+-
+- while (1)
+- {
+- if (idx >= domain->hash_size - incr)
+- idx -= domain->hash_size - incr;
+- else
+- idx += incr;
+-
+- nstr = W (domain->must_swap, domain->hash_tab[idx]);
+- if (nstr == 0)
+- /* Hash table entry is empty. */
+- return NULL;
+-
+- if (W (domain->must_swap, domain->orig_tab[nstr - 1].length) == len
+- && strcmp (msgid,
+- domain->data + W (domain->must_swap,
+- domain->orig_tab[nstr - 1].offset))
+- == 0)
+- return (char *) domain->data
+- + W (domain->must_swap, domain->trans_tab[nstr - 1].offset);
+- }
+- /* NOTREACHED */
+- }
+-
+- /* Now we try the default method: binary search in the sorted
+- array of messages. */
+- bottom = 0;
+- top = domain->nstrings;
+- while (bottom < top)
+- {
+- int cmp_val;
+-
+- act = (bottom + top) / 2;
+- cmp_val = strcmp (msgid, domain->data
+- + W (domain->must_swap,
+- domain->orig_tab[act].offset));
+- if (cmp_val < 0)
+- top = act;
+- else if (cmp_val > 0)
+- bottom = act + 1;
+- else
+- break;
+- }
+-
+- /* If an translation is found return this. */
+- return bottom >= top ? NULL : (char *) domain->data
+- + W (domain->must_swap,
+- domain->trans_tab[act].offset);
+-}
+-
+-
+-/* Return string representation of locale CATEGORY. */
+-static const char *
+-category_to_name (category)
+- int category;
+-{
+- const char *retval;
+-
+- switch (category)
+- {
+-#ifdef LC_COLLATE
+- case LC_COLLATE:
+- retval = "LC_COLLATE";
+- break;
+-#endif
+-#ifdef LC_CTYPE
+- case LC_CTYPE:
+- retval = "LC_CTYPE";
+- break;
+-#endif
+-#ifdef LC_MONETARY
+- case LC_MONETARY:
+- retval = "LC_MONETARY";
+- break;
+-#endif
+-#ifdef LC_NUMERIC
+- case LC_NUMERIC:
+- retval = "LC_NUMERIC";
+- break;
+-#endif
+-#ifdef LC_TIME
+- case LC_TIME:
+- retval = "LC_TIME";
+- break;
+-#endif
+-#ifdef LC_MESSAGES
+- case LC_MESSAGES:
+- retval = "LC_MESSAGES";
+- break;
+-#endif
+-#ifdef LC_RESPONSE
+- case LC_RESPONSE:
+- retval = "LC_RESPONSE";
+- break;
+-#endif
+-#ifdef LC_ALL
+- case LC_ALL:
+- /* This might not make sense but is perhaps better than any other
+- value. */
+- retval = "LC_ALL";
+- break;
+-#endif
+- default:
+- /* If you have a better idea for a default value let me know. */
+- retval = "LC_XXX";
+- }
+-
+- return retval;
+-}
+-
+-/* Guess value of current locale from value of the environment variables. */
+-static const char *
+-guess_category_value (category, categoryname)
+- int category;
+- const char *categoryname;
+-{
+- const char *retval;
+-
+- /* The highest priority value is the `LANGUAGE' environment
+- variable. This is a GNU extension. */
+- retval = getenv ("LANGUAGE");
+- if (retval != NULL && retval[0] != '\0')
+- return retval;
+-
+- /* `LANGUAGE' is not set. So we have to proceed with the POSIX
+- methods of looking to `LC_ALL', `LC_xxx', and `LANG'. On some
+- systems this can be done by the `setlocale' function itself. */
+-#if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES && defined HAVE_LOCALE_NULL
+- return setlocale (category, NULL);
+-#else
+- /* Setting of LC_ALL overwrites all other. */
+- retval = getenv ("LC_ALL");
+- if (retval != NULL && retval[0] != '\0')
+- return retval;
+-
+- /* Next comes the name of the desired category. */
+- retval = getenv (categoryname);
+- if (retval != NULL && retval[0] != '\0')
+- return retval;
+-
+- /* Last possibility is the LANG environment variable. */
+- retval = getenv ("LANG");
+- if (retval != NULL && retval[0] != '\0')
+- return retval;
+-
+- /* We use C as the default domain. POSIX says this is implementation
+- defined. */
+- return "C";
+-#endif
+-}
+-
+-/* @@ begin of epilog @@ */
+-
+-/* We don't want libintl.a to depend on any other library. So we
+- avoid the non-standard function stpcpy. In GNU C Library this
+- function is available, though. Also allow the symbol HAVE_STPCPY
+- to be defined. */
+-#if !_LIBC && !HAVE_STPCPY
+-static char *
+-stpcpy (dest, src)
+- char *dest;
+- const char *src;
+-{
+- while ((*dest++ = *src++) != '\0')
+- /* Do nothing. */ ;
+- return dest - 1;
+-}
+-#endif
+diff -uprN clean/lrzsz-0.12.20/intl/dgettext.c lrzsz-0.12.20/intl/dgettext.c
+--- clean/lrzsz-0.12.20/intl/dgettext.c 1998-04-26 14:20:52.000000000 +0100
++++ lrzsz-0.12.20/intl/dgettext.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,59 +0,0 @@
+-/* dgettext.c -- implementation of the dgettext(3) function
+- Copyright (C) 1995 Software Foundation, Inc.
+-
+-This program is free software; you can redistribute it and/or modify
+-it under the terms of the GNU General Public License as published by
+-the Free Software Foundation; either version 2, or (at your option)
+-any later version.
+-
+-This program is distributed in the hope that it will be useful,
+-but WITHOUT ANY WARRANTY; without even the implied warranty of
+-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-GNU General Public License for more details.
+-
+-You should have received a copy of the GNU General Public License
+-along with this program; if not, write to the Free Software
+-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+-
+-#ifdef HAVE_CONFIG_H
+-# include <config.h>
+-#endif
+-
+-#if defined HAVE_LOCALE_H || defined _LIBC
+-# include <locale.h>
+-#endif
+-
+-#ifdef _LIBC
+-# include <libintl.h>
+-#else
+-# include "libgettext.h"
+-#endif
+-
+-/* @@ end of prolog @@ */
+-
+-/* Names for the libintl functions are a problem. They must not clash
+- with existing names and they should follow ANSI C. But this source
+- code is also used in GNU C Library where the names have a __
+- prefix. So we have to make a difference here. */
+-#ifdef _LIBC
+-# define DGETTEXT __dgettext
+-# define DCGETTEXT __dcgettext
+-#else
+-# define DGETTEXT dgettext__
+-# define DCGETTEXT dcgettext__
+-#endif
+-
+-/* Look up MSGID in the DOMAINNAME message catalog of the current
+- LC_MESSAGES locale. */
+-char *
+-DGETTEXT (domainname, msgid)
+- const char *domainname;
+- const char *msgid;
+-{
+- return DCGETTEXT (domainname, msgid, LC_MESSAGES);
+-}
+-
+-#ifdef _LIBC
+-/* Alias for function name in GNU C Library. */
+-weak_alias (__dgettext, dgettext);
+-#endif
+diff -uprN clean/lrzsz-0.12.20/intl/explodename.c lrzsz-0.12.20/intl/explodename.c
+--- clean/lrzsz-0.12.20/intl/explodename.c 1998-04-26 14:22:37.000000000 +0100
++++ lrzsz-0.12.20/intl/explodename.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,181 +0,0 @@
+-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+- Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software Foundation,
+- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+-
+-#ifdef HAVE_CONFIG_H
+-# include <config.h>
+-#endif
+-
+-#include <stdlib.h>
+-#include <string.h>
+-#include <sys/types.h>
+-
+-#include "loadinfo.h"
+-
+-/* On some strange systems still no definition of NULL is found. Sigh! */
+-#ifndef NULL
+-# if defined __STDC__ && __STDC__
+-# define NULL ((void *) 0)
+-# else
+-# define NULL 0
+-# endif
+-#endif
+-
+-/* @@ end of prolog @@ */
+-
+-int
+-_nl_explode_name (name, language, modifier, territory, codeset,
+- normalized_codeset, special, sponsor, revision)
+- char *name;
+- const char **language;
+- const char **modifier;
+- const char **territory;
+- const char **codeset;
+- const char **normalized_codeset;
+- const char **special;
+- const char **sponsor;
+- const char **revision;
+-{
+- enum { undecided, xpg, cen } syntax;
+- char *cp;
+- int mask;
+-
+- *modifier = NULL;
+- *territory = NULL;
+- *codeset = NULL;
+- *normalized_codeset = NULL;
+- *special = NULL;
+- *sponsor = NULL;
+- *revision = NULL;
+-
+- /* Now we determine the single parts of the locale name. First
+- look for the language. Termination symbols are `_' and `@' if
+- we use XPG4 style, and `_', `+', and `,' if we use CEN syntax. */
+- mask = 0;
+- syntax = undecided;
+- *language = cp = name;
+- while (cp[0] != '\0' && cp[0] != '_' && cp[0] != '@'
+- && cp[0] != '+' && cp[0] != ',')
+- ++cp;
+-
+- if (*language == cp)
+- /* This does not make sense: language has to be specified. Use
+- this entry as it is without exploding. Perhaps it is an alias. */
+- cp = strchr (*language, '\0');
+- else if (cp[0] == '_')
+- {
+- /* Next is the territory. */
+- cp[0] = '\0';
+- *territory = ++cp;
+-
+- while (cp[0] != '\0' && cp[0] != '.' && cp[0] != '@'
+- && cp[0] != '+' && cp[0] != ',' && cp[0] != '_')
+- ++cp;
+-
+- mask |= TERRITORY;
+-
+- if (cp[0] == '.')
+- {
+- /* Next is the codeset. */
+- syntax = xpg;
+- cp[0] = '\0';
+- *codeset = ++cp;
+-
+- while (cp[0] != '\0' && cp[0] != '@')
+- ++cp;
+-
+- mask |= XPG_CODESET;
+-
+- if (*codeset != cp && (*codeset)[0] != '\0')
+- {
+- *normalized_codeset = _nl_normalize_codeset (*codeset,
+- cp - *codeset);
+- if (strcmp (*codeset, *normalized_codeset) == 0)
+- free ((char *) *normalized_codeset);
+- else
+- mask |= XPG_NORM_CODESET;
+- }
+- }
+- }
+-
+- if (cp[0] == '@' || (syntax != xpg && cp[0] == '+'))
+- {
+- /* Next is the modifier. */
+- syntax = cp[0] == '@' ? xpg : cen;
+- cp[0] = '\0';
+- *modifier = ++cp;
+-
+- while (syntax == cen && cp[0] != '\0' && cp[0] != '+'
+- && cp[0] != ',' && cp[0] != '_')
+- ++cp;
+-
+- mask |= XPG_MODIFIER | CEN_AUDIENCE;
+- }
+-
+- if (syntax != xpg && (cp[0] == '+' || cp[0] == ',' || cp[0] == '_'))
+- {
+- syntax = cen;
+-
+- if (cp[0] == '+')
+- {
+- /* Next is special application (CEN syntax). */
+- cp[0] = '\0';
+- *special = ++cp;
+-
+- while (cp[0] != '\0' && cp[0] != ',' && cp[0] != '_')
+- ++cp;
+-
+- mask |= CEN_SPECIAL;
+- }
+-
+- if (cp[0] == ',')
+- {
+- /* Next is sponsor (CEN syntax). */
+- cp[0] = '\0';
+- *sponsor = ++cp;
+-
+- while (cp[0] != '\0' && cp[0] != '_')
+- ++cp;
+-
+- mask |= CEN_SPONSOR;
+- }
+-
+- if (cp[0] == '_')
+- {
+- /* Next is revision (CEN syntax). */
+- cp[0] = '\0';
+- *revision = ++cp;
+-
+- mask |= CEN_REVISION;
+- }
+- }
+-
+- /* For CEN syntax values it might be important to have the
+- separator character in the file name, not for XPG syntax. */
+- if (syntax == xpg)
+- {
+- if (*territory != NULL && (*territory)[0] == '\0')
+- mask &= ~TERRITORY;
+-
+- if (*codeset != NULL && (*codeset)[0] == '\0')
+- mask &= ~XPG_CODESET;
+-
+- if (*modifier != NULL && (*modifier)[0] == '\0')
+- mask &= ~XPG_MODIFIER;
+- }
+-
+- return mask;
+-}
+diff -uprN clean/lrzsz-0.12.20/intl/finddomain.c lrzsz-0.12.20/intl/finddomain.c
+--- clean/lrzsz-0.12.20/intl/finddomain.c 1998-04-26 14:22:36.000000000 +0100
++++ lrzsz-0.12.20/intl/finddomain.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,189 +0,0 @@
+-/* Handle list of needed message catalogs
+- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+- Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software Foundation,
+- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+-
+-#ifdef HAVE_CONFIG_H
+-# include <config.h>
+-#endif
+-
+-#include <ctype.h>
+-#include <errno.h>
+-#include <stdio.h>
+-#include <sys/types.h>
+-
+-#if defined STDC_HEADERS || defined _LIBC
+-# include <stdlib.h>
+-#else
+-# ifdef HAVE_MALLOC_H
+-# include <malloc.h>
+-# else
+-void free ();
+-# endif
+-#endif
+-
+-#if defined HAVE_STRING_H || defined _LIBC
+-# include <string.h>
+-#else
+-# include <strings.h>
+-# ifndef memcpy
+-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
+-# endif
+-#endif
+-#if !HAVE_STRCHR && !defined _LIBC
+-# ifndef strchr
+-# define strchr index
+-# endif
+-#endif
+-
+-#if defined HAVE_UNISTD_H || defined _LIBC
+-# include <unistd.h>
+-#endif
+-
+-#include "gettext.h"
+-#include "gettextP.h"
+-#ifdef _LIBC
+-# include <libintl.h>
+-#else
+-# include "libgettext.h"
+-#endif
+-
+-/* @@ end of prolog @@ */
+-/* List of already loaded domains. */
+-static struct loaded_l10nfile *_nl_loaded_domains;
+-
+-
+-/* Return a data structure describing the message catalog described by
+- the DOMAINNAME and CATEGORY parameters with respect to the currently
+- established bindings. */
+-struct loaded_l10nfile *
+-_nl_find_domain (dirname, locale, domainname)
+- const char *dirname;
+- char *locale;
+- const char *domainname;
+-{
+- struct loaded_l10nfile *retval;
+- const char *language;
+- const char *modifier;
+- const char *territory;
+- const char *codeset;
+- const char *normalized_codeset;
+- const char *special;
+- const char *sponsor;
+- const char *revision;
+- const char *alias_value;
+- int mask;
+-
+- /* LOCALE can consist of up to four recognized parts for the XPG syntax:
+-
+- language[_territory[.codeset]][@modifier]
+-
+- and six parts for the CEN syntax:
+-
+- language[_territory][+audience][+special][,[sponsor][_revision]]
+-
+- Beside the first all of them are allowed to be missing. If the
+- full specified locale is not found, the less specific one are
+- looked for. The various part will be stripped of according to
+- the following order:
+- (1) revision
+- (2) sponsor
+- (3) special
+- (4) codeset
+- (5) normalized codeset
+- (6) territory
+- (7) audience/modifier
+- */
+-
+- /* If we have already tested for this locale entry there has to
+- be one data set in the list of loaded domains. */
+- retval = _nl_make_l10nflist (&_nl_loaded_domains, dirname,
+- strlen (dirname) + 1, 0, locale, NULL, NULL,
+- NULL, NULL, NULL, NULL, NULL, domainname, 0);
+- if (retval != NULL)
+- {
+- /* We know something about this locale. */
+- int cnt;
+-
+- if (retval->decided == 0)
+- _nl_load_domain (retval);
+-
+- if (retval->data != NULL)
+- return retval;
+-
+- for (cnt = 0; retval->successor[cnt] != NULL; ++cnt)
+- {
+- if (retval->successor[cnt]->decided == 0)
+- _nl_load_domain (retval->successor[cnt]);
+-
+- if (retval->successor[cnt]->data != NULL)
+- break;
+- }
+- return cnt >= 0 ? retval : NULL;
+- /* NOTREACHED */
+- }
+-
+- /* See whether the locale value is an alias. If yes its value
+- *overwrites* the alias name. No test for the original value is
+- done. */
+- alias_value = _nl_expand_alias (locale);
+- if (alias_value != NULL)
+- {
+- size_t len = strlen (alias_value) + 1;
+- locale = (char *) malloc (len);
+- if (locale == NULL)
+- return NULL;
+-
+- memcpy (locale, alias_value, len);
+- }
+-
+- /* Now we determine the single parts of the locale name. First
+- look for the language. Termination symbols are `_' and `@' if
+- we use XPG4 style, and `_', `+', and `,' if we use CEN syntax. */
+- mask = _nl_explode_name (locale, &language, &modifier, &territory,
+- &codeset, &normalized_codeset, &special,
+- &sponsor, &revision);
+-
+- /* Create all possible locale entries which might be interested in
+- generalization. */
+- retval = _nl_make_l10nflist (&_nl_loaded_domains, dirname,
+- strlen (dirname) + 1, mask, language, territory,
+- codeset, normalized_codeset, modifier, special,
+- sponsor, revision, domainname, 1);
+- if (retval == NULL)
+- /* This means we are out of core. */
+- return NULL;
+-
+- if (retval->decided == 0)
+- _nl_load_domain (retval);
+- if (retval->data == NULL)
+- {
+- int cnt;
+- for (cnt = 0; retval->successor[cnt] != NULL; ++cnt)
+- {
+- if (retval->successor[cnt]->decided == 0)
+- _nl_load_domain (retval->successor[cnt]);
+- if (retval->successor[cnt]->data != NULL)
+- break;
+- }
+- }
+-
+- /* The room for an alias was dynamically allocated. Free it now. */
+- if (alias_value != NULL)
+- free (locale);
+-
+- return retval;
+-}
+diff -uprN clean/lrzsz-0.12.20/intl/gettext.c lrzsz-0.12.20/intl/gettext.c
+--- clean/lrzsz-0.12.20/intl/gettext.c 1998-04-26 14:22:36.000000000 +0100
++++ lrzsz-0.12.20/intl/gettext.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,70 +0,0 @@
+-/* Implementation of gettext(3) function
+- Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software Foundation,
+- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+-
+-#ifdef HAVE_CONFIG_H
+-# include <config.h>
+-#endif
+-
+-#ifdef _LIBC
+-# define __need_NULL
+-# include <stddef.h>
+-#else
+-# ifdef STDC_HEADERS
+-# include <stdlib.h> /* Just for NULL. */
+-# else
+-# ifdef HAVE_STRING_H
+-# include <string.h>
+-# else
+-# define NULL ((void *) 0)
+-# endif
+-# endif
+-#endif
+-
+-#ifdef _LIBC
+-# include <libintl.h>
+-#else
+-# include "libgettext.h"
+-#endif
+-
+-/* @@ end of prolog @@ */
+-
+-/* Names for the libintl functions are a problem. They must not clash
+- with existing names and they should follow ANSI C. But this source
+- code is also used in GNU C Library where the names have a __
+- prefix. So we have to make a difference here. */
+-#ifdef _LIBC
+-# define GETTEXT __gettext
+-# define DGETTEXT __dgettext
+-#else
+-# define GETTEXT gettext__
+-# define DGETTEXT dgettext__
+-#endif
+-
+-/* Look up MSGID in the current default message catalog for the current
+- LC_MESSAGES locale. If not found, returns MSGID itself (the default
+- text). */
+-char *
+-GETTEXT (msgid)
+- const char *msgid;
+-{
+- return DGETTEXT (NULL, msgid);
+-}
+-
+-#ifdef _LIBC
+-/* Alias for function name in GNU C Library. */
+-weak_alias (__gettext, gettext);
+-#endif
+diff -uprN clean/lrzsz-0.12.20/intl/gettext.h lrzsz-0.12.20/intl/gettext.h
+--- clean/lrzsz-0.12.20/intl/gettext.h 1998-04-26 14:22:35.000000000 +0100
++++ lrzsz-0.12.20/intl/gettext.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,105 +0,0 @@
+-/* Internal header for GNU gettext internationalization functions
+- Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU Library General Public
+- License along with the GNU C Library; see the file COPYING.LIB. If not,
+- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+- Boston, MA 02111-1307, USA. */
+-
+-#ifndef _GETTEXT_H
+-#define _GETTEXT_H 1
+-
+-#include <stdio.h>
+-
+-#if HAVE_LIMITS_H || _LIBC
+-# include <limits.h>
+-#endif
+-
+-/* @@ end of prolog @@ */
+-
+-/* The magic number of the GNU message catalog format. */
+-#define _MAGIC 0x950412de
+-#define _MAGIC_SWAPPED 0xde120495
+-
+-/* Revision number of the currently used .mo (binary) file format. */
+-#define MO_REVISION_NUMBER 0
+-
+-/* The following contortions are an attempt to use the C preprocessor
+- to determine an unsigned integral type that is 32 bits wide. An
+- alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but
+- doing that would require that the configure script compile and *run*
+- the resulting executable. Locally running cross-compiled executables
+- is usually not possible. */
+-
+-#if __STDC__
+-# define UINT_MAX_32_BITS 4294967295U
+-#else
+-# define UINT_MAX_32_BITS 0xFFFFFFFF
+-#endif
+-
+-/* If UINT_MAX isn't defined, assume it's a 32-bit type.
+- This should be valid for all systems GNU cares about because
+- that doesn't include 16-bit systems, and only modern systems
+- (that certainly have <limits.h>) have 64+-bit integral types. */
+-
+-#ifndef UINT_MAX
+-# define UINT_MAX UINT_MAX_32_BITS
+-#endif
+-
+-#if UINT_MAX == UINT_MAX_32_BITS
+-typedef unsigned nls_uint32;
+-#else
+-# if USHRT_MAX == UINT_MAX_32_BITS
+-typedef unsigned short nls_uint32;
+-# else
+-# if ULONG_MAX == UINT_MAX_32_BITS
+-typedef unsigned long nls_uint32;
+-# else
+- /* The following line is intended to throw an error. Using #error is
+- not portable enough. */
+- "Cannot determine unsigned 32-bit data type."
+-# endif
+-# endif
+-#endif
+-
+-
+-/* Header for binary .mo file format. */
+-struct mo_file_header
+-{
+- /* The magic number. */
+- nls_uint32 magic;
+- /* The revision number of the file format. */
+- nls_uint32 revision;
+- /* The number of strings pairs. */
+- nls_uint32 nstrings;
+- /* Offset of table with start offsets of original strings. */
+- nls_uint32 orig_tab_offset;
+- /* Offset of table with start offsets of translation strings. */
+- nls_uint32 trans_tab_offset;
+- /* Size of hashing table. */
+- nls_uint32 hash_tab_size;
+- /* Offset of first hashing entry. */
+- nls_uint32 hash_tab_offset;
+-};
+-
+-struct string_desc
+-{
+- /* Length of addressed string. */
+- nls_uint32 length;
+- /* Offset of string in file. */
+- nls_uint32 offset;
+-};
+-
+-/* @@ begin of epilog @@ */
+-
+-#endif /* gettext.h */
+diff -uprN clean/lrzsz-0.12.20/intl/gettextP.h lrzsz-0.12.20/intl/gettextP.h
+--- clean/lrzsz-0.12.20/intl/gettextP.h 1998-04-26 14:22:35.000000000 +0100
++++ lrzsz-0.12.20/intl/gettextP.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,73 +0,0 @@
+-/* Header describing internals of gettext library
+- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software Foundation,
+- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+-
+-#ifndef _GETTEXTP_H
+-#define _GETTEXTP_H
+-
+-#include "loadinfo.h"
+-
+-/* @@ end of prolog @@ */
+-
+-#ifndef PARAMS
+-# if __STDC__
+-# define PARAMS(args) args
+-# else
+-# define PARAMS(args) ()
+-# endif
+-#endif
+-
+-#ifndef W
+-# define W(flag, data) ((flag) ? SWAP (data) : (data))
+-#endif
+-
+-
+-static nls_uint32 SWAP PARAMS ((nls_uint32 i));
+-
+-static inline nls_uint32
+-SWAP (i)
+- nls_uint32 i;
+-{
+- return (i << 24) | ((i & 0xff00) << 8) | ((i >> 8) & 0xff00) | (i >> 24);
+-}
+-
+-
+-struct loaded_domain
+-{
+- const char *data;
+- int must_swap;
+- nls_uint32 nstrings;
+- struct string_desc *orig_tab;
+- struct string_desc *trans_tab;
+- nls_uint32 hash_size;
+- nls_uint32 *hash_tab;
+-};
+-
+-struct binding
+-{
+- struct binding *next;
+- char *domainname;
+- char *dirname;
+-};
+-
+-struct loaded_l10nfile *_nl_find_domain PARAMS ((const char *__dirname,
+- char *__locale,
+- const char *__domainname));
+-void _nl_load_domain PARAMS ((struct loaded_l10nfile *__domain));
+-
+-/* @@ begin of epilog @@ */
+-
+-#endif /* gettextP.h */
+diff -uprN clean/lrzsz-0.12.20/intl/hash-string.h lrzsz-0.12.20/intl/hash-string.h
+--- clean/lrzsz-0.12.20/intl/hash-string.h 1998-04-26 14:22:36.000000000 +0100
++++ lrzsz-0.12.20/intl/hash-string.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,63 +0,0 @@
+-/* Implements a string hashing function.
+- Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU Library General Public
+- License along with the GNU C Library; see the file COPYING.LIB. If not,
+- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+- Boston, MA 02111-1307, USA. */
+-
+-#ifdef HAVE_VALUES_H
+-# include <values.h>
+-#endif
+-
+-/* @@ end of prolog @@ */
+-
+-#ifndef PARAMS
+-# if __STDC__
+-# define PARAMS(Args) Args
+-# else
+-# define PARAMS(Args) ()
+-# endif
+-#endif
+-
+-/* We assume to have `unsigned long int' value with at least 32 bits. */
+-#define HASHWORDBITS 32
+-
+-
+-/* Defines the so called `hashpjw' function by P.J. Weinberger
+- [see Aho/Sethi/Ullman, COMPILERS: Principles, Techniques and Tools,
+- 1986, 1987 Bell Telephone Laboratories, Inc.] */
+-static unsigned long hash_string PARAMS ((const char *__str_param));
+-
+-static inline unsigned long
+-hash_string (str_param)
+- const char *str_param;
+-{
+- unsigned long int hval, g;
+- const char *str = str_param;
+-
+- /* Compute the hash value for the given string. */
+- hval = 0;
+- while (*str != '\0')
+- {
+- hval <<= 4;
+- hval += (unsigned long) *str++;
+- g = hval & ((unsigned long) 0xf << (HASHWORDBITS - 4));
+- if (g != 0)
+- {
+- hval ^= g >> (HASHWORDBITS - 8);
+- hval ^= g;
+- }
+- }
+- return hval;
+-}
+diff -uprN clean/lrzsz-0.12.20/intl/intl-compat.c lrzsz-0.12.20/intl/intl-compat.c
+--- clean/lrzsz-0.12.20/intl/intl-compat.c 1998-04-26 14:20:52.000000000 +0100
++++ lrzsz-0.12.20/intl/intl-compat.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,76 +0,0 @@
+-/* intl-compat.c - Stub functions to call gettext functions from GNU gettext
+- Library.
+- Copyright (C) 1995 Software Foundation, Inc.
+-
+-This program is free software; you can redistribute it and/or modify
+-it under the terms of the GNU General Public License as published by
+-the Free Software Foundation; either version 2, or (at your option)
+-any later version.
+-
+-This program is distributed in the hope that it will be useful,
+-but WITHOUT ANY WARRANTY; without even the implied warranty of
+-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-GNU General Public License for more details.
+-
+-You should have received a copy of the GNU General Public License
+-along with this program; if not, write to the Free Software
+-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+-
+-#ifdef HAVE_CONFIG_H
+-# include <config.h>
+-#endif
+-
+-#include "libgettext.h"
+-
+-/* @@ end of prolog @@ */
+-
+-
+-#undef gettext
+-#undef dgettext
+-#undef dcgettext
+-#undef textdomain
+-#undef bindtextdomain
+-
+-
+-char *
+-bindtextdomain (domainname, dirname)
+- const char *domainname;
+- const char *dirname;
+-{
+- return bindtextdomain__ (domainname, dirname);
+-}
+-
+-
+-char *
+-dcgettext (domainname, msgid, category)
+- const char *domainname;
+- const char *msgid;
+- int category;
+-{
+- return dcgettext__ (domainname, msgid, category);
+-}
+-
+-
+-char *
+-dgettext (domainname, msgid)
+- const char *domainname;
+- const char *msgid;
+-{
+- return dgettext__ (domainname, msgid);
+-}
+-
+-
+-char *
+-gettext (msgid)
+- const char *msgid;
+-{
+- return gettext__ (msgid);
+-}
+-
+-
+-char *
+-textdomain (domainname)
+- const char *domainname;
+-{
+- return textdomain__ (domainname);
+-}
+diff -uprN clean/lrzsz-0.12.20/intl/l10nflist.c lrzsz-0.12.20/intl/l10nflist.c
+--- clean/lrzsz-0.12.20/intl/l10nflist.c 1998-04-26 14:22:37.000000000 +0100
++++ lrzsz-0.12.20/intl/l10nflist.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,409 +0,0 @@
+-/* Handle list of needed message catalogs
+- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+- Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software Foundation,
+- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+-
+-#ifdef HAVE_CONFIG_H
+-# include <config.h>
+-#endif
+-
+-
+-#if defined HAVE_STRING_H || defined _LIBC
+-# ifndef _GNU_SOURCE
+-# define _GNU_SOURCE 1
+-# endif
+-# include <string.h>
+-#else
+-# include <strings.h>
+-# ifndef memcpy
+-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
+-# endif
+-#endif
+-#if !HAVE_STRCHR && !defined _LIBC
+-# ifndef strchr
+-# define strchr index
+-# endif
+-#endif
+-
+-#if defined _LIBC || defined HAVE_ARGZ_H
+-# include <argz.h>
+-#endif
+-#include <ctype.h>
+-#include <sys/types.h>
+-
+-#if defined STDC_HEADERS || defined _LIBC
+-# include <stdlib.h>
+-#endif
+-
+-#include "loadinfo.h"
+-
+-/* On some strange systems still no definition of NULL is found. Sigh! */
+-#ifndef NULL
+-# if defined __STDC__ && __STDC__
+-# define NULL ((void *) 0)
+-# else
+-# define NULL 0
+-# endif
+-#endif
+-
+-/* @@ end of prolog @@ */
+-
+-#ifdef _LIBC
+-/* Rename the non ANSI C functions. This is required by the standard
+- because some ANSI C functions will require linking with this object
+- file and the name space must not be polluted. */
+-# define stpcpy(dest, src) __stpcpy(dest, src)
+-#else
+-# ifndef HAVE_STPCPY
+-static char *stpcpy PARAMS ((char *dest, const char *src));
+-# endif
+-#endif
+-
+-/* Define function which are usually not available. */
+-
+-#if !defined _LIBC && !defined HAVE___ARGZ_COUNT
+-/* Returns the number of strings in ARGZ. */
+-static size_t argz_count__ PARAMS ((const char *argz, size_t len));
+-
+-static size_t
+-argz_count__ (argz, len)
+- const char *argz;
+- size_t len;
+-{
+- size_t count = 0;
+- while (len > 0)
+- {
+- size_t part_len = strlen (argz);
+- argz += part_len + 1;
+- len -= part_len + 1;
+- count++;
+- }
+- return count;
+-}
+-# undef __argz_count
+-# define __argz_count(argz, len) argz_count__ (argz, len)
+-#endif /* !_LIBC && !HAVE___ARGZ_COUNT */
+-
+-#if !defined _LIBC && !defined HAVE___ARGZ_STRINGIFY
+-/* Make '\0' separated arg vector ARGZ printable by converting all the '\0's
+- except the last into the character SEP. */
+-static void argz_stringify__ PARAMS ((char *argz, size_t len, int sep));
+-
+-static void
+-argz_stringify__ (argz, len, sep)
+- char *argz;
+- size_t len;
+- int sep;
+-{
+- while (len > 0)
+- {
+- size_t part_len = strlen (argz);
+- argz += part_len;
+- len -= part_len + 1;
+- if (len > 0)
+- *argz++ = sep;
+- }
+-}
+-# undef __argz_stringify
+-# define __argz_stringify(argz, len, sep) argz_stringify__ (argz, len, sep)
+-#endif /* !_LIBC && !HAVE___ARGZ_STRINGIFY */
+-
+-#if !defined _LIBC && !defined HAVE___ARGZ_NEXT
+-static char *argz_next__ PARAMS ((char *argz, size_t argz_len,
+- const char *entry));
+-
+-static char *
+-argz_next__ (argz, argz_len, entry)
+- char *argz;
+- size_t argz_len;
+- const char *entry;
+-{
+- if (entry)
+- {
+- if (entry < argz + argz_len)
+- entry = strchr (entry, '\0') + 1;
+-
+- return entry >= argz + argz_len ? NULL : (char *) entry;
+- }
+- else
+- if (argz_len > 0)
+- return argz;
+- else
+- return 0;
+-}
+-# undef __argz_next
+-# define __argz_next(argz, len, entry) argz_next__ (argz, len, entry)
+-#endif /* !_LIBC && !HAVE___ARGZ_NEXT */
+-
+-
+-/* Return number of bits set in X. */
+-static int pop PARAMS ((int x));
+-
+-static inline int
+-pop (x)
+- int x;
+-{
+- /* We assume that no more than 16 bits are used. */
+- x = ((x & ~0x5555) >> 1) + (x & 0x5555);
+- x = ((x & ~0x3333) >> 2) + (x & 0x3333);
+- x = ((x >> 4) + x) & 0x0f0f;
+- x = ((x >> 8) + x) & 0xff;
+-
+- return x;
+-}
+-
+-\f
+-struct loaded_l10nfile *
+-_nl_make_l10nflist (l10nfile_list, dirlist, dirlist_len, mask, language,
+- territory, codeset, normalized_codeset, modifier, special,
+- sponsor, revision, filename, do_allocate)
+- struct loaded_l10nfile **l10nfile_list;
+- const char *dirlist;
+- size_t dirlist_len;
+- int mask;
+- const char *language;
+- const char *territory;
+- const char *codeset;
+- const char *normalized_codeset;
+- const char *modifier;
+- const char *special;
+- const char *sponsor;
+- const char *revision;
+- const char *filename;
+- int do_allocate;
+-{
+- char *abs_filename;
+- struct loaded_l10nfile *last = NULL;
+- struct loaded_l10nfile *retval;
+- char *cp;
+- size_t entries;
+- int cnt;
+-
+- /* Allocate room for the full file name. */
+- abs_filename = (char *) malloc (dirlist_len
+- + strlen (language)
+- + ((mask & TERRITORY) != 0
+- ? strlen (territory) + 1 : 0)
+- + ((mask & XPG_CODESET) != 0
+- ? strlen (codeset) + 1 : 0)
+- + ((mask & XPG_NORM_CODESET) != 0
+- ? strlen (normalized_codeset) + 1 : 0)
+- + (((mask & XPG_MODIFIER) != 0
+- || (mask & CEN_AUDIENCE) != 0)
+- ? strlen (modifier) + 1 : 0)
+- + ((mask & CEN_SPECIAL) != 0
+- ? strlen (special) + 1 : 0)
+- + (((mask & CEN_SPONSOR) != 0
+- || (mask & CEN_REVISION) != 0)
+- ? (1 + ((mask & CEN_SPONSOR) != 0
+- ? strlen (sponsor) + 1 : 0)
+- + ((mask & CEN_REVISION) != 0
+- ? strlen (revision) + 1 : 0)) : 0)
+- + 1 + strlen (filename) + 1);
+-
+- if (abs_filename == NULL)
+- return NULL;
+-
+- retval = NULL;
+- last = NULL;
+-
+- /* Construct file name. */
+- memcpy (abs_filename, dirlist, dirlist_len);
+- __argz_stringify (abs_filename, dirlist_len, ':');
+- cp = abs_filename + (dirlist_len - 1);
+- *cp++ = '/';
+- cp = stpcpy (cp, language);
+-
+- if ((mask & TERRITORY) != 0)
+- {
+- *cp++ = '_';
+- cp = stpcpy (cp, territory);
+- }
+- if ((mask & XPG_CODESET) != 0)
+- {
+- *cp++ = '.';
+- cp = stpcpy (cp, codeset);
+- }
+- if ((mask & XPG_NORM_CODESET) != 0)
+- {
+- *cp++ = '.';
+- cp = stpcpy (cp, normalized_codeset);
+- }
+- if ((mask & (XPG_MODIFIER | CEN_AUDIENCE)) != 0)
+- {
+- /* This component can be part of both syntaces but has different
+- leading characters. For CEN we use `+', else `@'. */
+- *cp++ = (mask & CEN_AUDIENCE) != 0 ? '+' : '@';
+- cp = stpcpy (cp, modifier);
+- }
+- if ((mask & CEN_SPECIAL) != 0)
+- {
+- *cp++ = '+';
+- cp = stpcpy (cp, special);
+- }
+- if ((mask & (CEN_SPONSOR | CEN_REVISION)) != 0)
+- {
+- *cp++ = ',';
+- if ((mask & CEN_SPONSOR) != 0)
+- cp = stpcpy (cp, sponsor);
+- if ((mask & CEN_REVISION) != 0)
+- {
+- *cp++ = '_';
+- cp = stpcpy (cp, revision);
+- }
+- }
+-
+- *cp++ = '/';
+- stpcpy (cp, filename);
+-
+- /* Look in list of already loaded domains whether it is already
+- available. */
+- last = NULL;
+- for (retval = *l10nfile_list; retval != NULL; retval = retval->next)
+- if (retval->filename != NULL)
+- {
+- int compare = strcmp (retval->filename, abs_filename);
+- if (compare == 0)
+- /* We found it! */
+- break;
+- if (compare < 0)
+- {
+- /* It's not in the list. */
+- retval = NULL;
+- break;
+- }
+-
+- last = retval;
+- }
+-
+- if (retval != NULL || do_allocate == 0)
+- {
+- free (abs_filename);
+- return retval;
+- }
+-
+- retval = (struct loaded_l10nfile *)
+- malloc (sizeof (*retval) + (__argz_count (dirlist, dirlist_len)
+- * (1 << pop (mask))
+- * sizeof (struct loaded_l10nfile *)));
+- if (retval == NULL)
+- return NULL;
+-
+- retval->filename = abs_filename;
+- retval->decided = (__argz_count (dirlist, dirlist_len) != 1
+- || ((mask & XPG_CODESET) != 0
+- && (mask & XPG_NORM_CODESET) != 0));
+- retval->data = NULL;
+-
+- if (last == NULL)
+- {
+- retval->next = *l10nfile_list;
+- *l10nfile_list = retval;
+- }
+- else
+- {
+- retval->next = last->next;
+- last->next = retval;
+- }
+-
+- entries = 0;
+- /* If the DIRLIST is a real list the RETVAL entry corresponds not to
+- a real file. So we have to use the DIRLIST separation mechanism
+- of the inner loop. */
+- cnt = __argz_count (dirlist, dirlist_len) == 1 ? mask - 1 : mask;
+- for (; cnt >= 0; --cnt)
+- if ((cnt & ~mask) == 0
+- && ((cnt & CEN_SPECIFIC) == 0 || (cnt & XPG_SPECIFIC) == 0)
+- && ((cnt & XPG_CODESET) == 0 || (cnt & XPG_NORM_CODESET) == 0))
+- {
+- /* Iterate over all elements of the DIRLIST. */
+- char *dir = NULL;
+-
+- while ((dir = __argz_next ((char *) dirlist, dirlist_len, dir))
+- != NULL)
+- retval->successor[entries++]
+- = _nl_make_l10nflist (l10nfile_list, dir, strlen (dir) + 1, cnt,
+- language, territory, codeset,
+- normalized_codeset, modifier, special,
+- sponsor, revision, filename, 1);
+- }
+- retval->successor[entries] = NULL;
+-
+- return retval;
+-}
+-\f
+-/* Normalize codeset name. There is no standard for the codeset
+- names. Normalization allows the user to use any of the common
+- names. */
+-const char *
+-_nl_normalize_codeset (codeset, name_len)
+- const char *codeset;
+- size_t name_len;
+-{
+- int len = 0;
+- int only_digit = 1;
+- char *retval;
+- char *wp;
+- size_t cnt;
+-
+- for (cnt = 0; cnt < name_len; ++cnt)
+- if (isalnum (codeset[cnt]))
+- {
+- ++len;
+-
+- if (isalpha (codeset[cnt]))
+- only_digit = 0;
+- }
+-
+- retval = (char *) malloc ((only_digit ? 3 : 0) + len + 1);
+-
+- if (retval != NULL)
+- {
+- if (only_digit)
+- wp = stpcpy (retval, "iso");
+- else
+- wp = retval;
+-
+- for (cnt = 0; cnt < name_len; ++cnt)
+- if (isalpha (codeset[cnt]))
+- *wp++ = tolower (codeset[cnt]);
+- else if (isdigit (codeset[cnt]))
+- *wp++ = codeset[cnt];
+-
+- *wp = '\0';
+- }
+-
+- return (const char *) retval;
+-}
+-
+-
+-/* @@ begin of epilog @@ */
+-
+-/* We don't want libintl.a to depend on any other library. So we
+- avoid the non-standard function stpcpy. In GNU C Library this
+- function is available, though. Also allow the symbol HAVE_STPCPY
+- to be defined. */
+-#if !_LIBC && !HAVE_STPCPY
+-static char *
+-stpcpy (dest, src)
+- char *dest;
+- const char *src;
+-{
+- while ((*dest++ = *src++) != '\0')
+- /* Do nothing. */ ;
+- return dest - 1;
+-}
+-#endif
+diff -uprN clean/lrzsz-0.12.20/intl/libgettext.h lrzsz-0.12.20/intl/libgettext.h
+--- clean/lrzsz-0.12.20/intl/libgettext.h 1998-04-26 14:22:36.000000000 +0100
++++ lrzsz-0.12.20/intl/libgettext.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,182 +0,0 @@
+-/* Message catalogs for internationalization.
+- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software Foundation,
+- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+-
+-/* Because on some systems (e.g. Solaris) we sometimes have to include
+- the systems libintl.h as well as this file we have more complex
+- include protection above. But the systems header might perhaps also
+- define _LIBINTL_H and therefore we have to protect the definition here. */
+-
+-#if !defined (_LIBINTL_H) || !defined (_LIBGETTEXT_H)
+-#if !defined (_LIBINTL_H)
+-# define _LIBINTL_H 1
+-#endif
+-#define _LIBGETTEXT_H 1
+-
+-/* We define an additional symbol to signal that we use the GNU
+- implementation of gettext. */
+-#define __USE_GNU_GETTEXT 1
+-
+-#include <sys/types.h>
+-
+-#if HAVE_LOCALE_H
+-# include <locale.h>
+-#endif
+-
+-
+-#ifdef __cplusplus
+-extern "C" {
+-#endif
+-
+-/* @@ end of prolog @@ */
+-
+-#ifndef PARAMS
+-# if __STDC__
+-# define PARAMS(args) args
+-# else
+-# define PARAMS(args) ()
+-# endif
+-#endif
+-
+-#ifndef NULL
+-# if !defined __cplusplus || defined __GNUC__
+-# define NULL ((void *) 0)
+-# else
+-# define NULL (0)
+-# endif
+-#endif
+-
+-#if !HAVE_LC_MESSAGES
+-/* This value determines the behaviour of the gettext() and dgettext()
+- function. But some system does not have this defined. Define it
+- to a default value. */
+-# define LC_MESSAGES (-1)
+-#endif
+-
+-
+-/* Declarations for gettext-using-catgets interface. Derived from
+- Jim Meyering's libintl.h. */
+-struct _msg_ent
+-{
+- const char *_msg;
+- int _msg_number;
+-};
+-
+-
+-#if HAVE_CATGETS
+-/* These two variables are defined in the automatically by po-to-tbl.sed
+- generated file `cat-id-tbl.c'. */
+-extern const struct _msg_ent _msg_tbl[];
+-extern int _msg_tbl_length;
+-#endif
+-
+-
+-/* For automatical extraction of messages sometimes no real
+- translation is needed. Instead the string itself is the result. */
+-#define gettext_noop(Str) (Str)
+-
+-/* Look up MSGID in the current default message catalog for the current
+- LC_MESSAGES locale. If not found, returns MSGID itself (the default
+- text). */
+-extern char *gettext PARAMS ((const char *__msgid));
+-extern char *gettext__ PARAMS ((const char *__msgid));
+-
+-/* Look up MSGID in the DOMAINNAME message catalog for the current
+- LC_MESSAGES locale. */
+-extern char *dgettext PARAMS ((const char *__domainname, const char *__msgid));
+-extern char *dgettext__ PARAMS ((const char *__domainname,
+- const char *__msgid));
+-
+-/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
+- locale. */
+-extern char *dcgettext PARAMS ((const char *__domainname, const char *__msgid,
+- int __category));
+-extern char *dcgettext__ PARAMS ((const char *__domainname,
+- const char *__msgid, int __category));
+-
+-
+-/* Set the current default message catalog to DOMAINNAME.
+- If DOMAINNAME is null, return the current default.
+- If DOMAINNAME is "", reset to the default of "messages". */
+-extern char *textdomain PARAMS ((const char *__domainname));
+-extern char *textdomain__ PARAMS ((const char *__domainname));
+-
+-/* Specify that the DOMAINNAME message catalog will be found
+- in DIRNAME rather than in the system locale data base. */
+-extern char *bindtextdomain PARAMS ((const char *__domainname,
+- const char *__dirname));
+-extern char *bindtextdomain__ PARAMS ((const char *__domainname,
+- const char *__dirname));
+-
+-#if ENABLE_NLS
+-
+-/* Solaris 2.3 has the gettext function but dcgettext is missing.
+- So we omit this optimization for Solaris 2.3. BTW, Solaris 2.4
+- has dcgettext. */
+-# if !HAVE_CATGETS && (!HAVE_GETTEXT || HAVE_DCGETTEXT)
+-
+-# define gettext(Msgid) \
+- dgettext (NULL, Msgid)
+-
+-# define dgettext(Domainname, Msgid) \
+- dcgettext (Domainname, Msgid, LC_MESSAGES)
+-
+-# if defined __GNUC__ && __GNUC__ == 2 && __GNUC_MINOR__ >= 7
+-/* This global variable is defined in loadmsgcat.c. We need a sign,
+- whether a new catalog was loaded, which can be associated with all
+- translations. */
+-extern int _nl_msg_cat_cntr;
+-
+-# define dcgettext(Domainname, Msgid, Category) \
+- (__extension__ \
+- ({ \
+- char *__result; \
+- if (__builtin_constant_p (Msgid)) \
+- { \
+- static char *__translation__; \
+- static int __catalog_counter__; \
+- if (! __translation__ || __catalog_counter__ != _nl_msg_cat_cntr) \
+- { \
+- __translation__ = \
+- dcgettext__ (Domainname, Msgid, Category); \
+- __catalog_counter__ = _nl_msg_cat_cntr; \
+- } \
+- __result = __translation__; \
+- } \
+- else \
+- __result = dcgettext__ (Domainname, Msgid, Category); \
+- __result; \
+- }))
+-# endif
+-# endif
+-
+-#else
+-
+-# define gettext(Msgid) (Msgid)
+-# define dgettext(Domainname, Msgid) (Msgid)
+-# define dcgettext(Domainname, Msgid, Category) (Msgid)
+-# define textdomain(Domainname) while (0) /* nothing */
+-# define bindtextdomain(Domainname, Dirname) while (0) /* nothing */
+-
+-#endif
+-
+-/* @@ begin of epilog @@ */
+-
+-#ifdef __cplusplus
+-}
+-#endif
+-
+-#endif
+diff -uprN clean/lrzsz-0.12.20/intl/linux-msg.sed lrzsz-0.12.20/intl/linux-msg.sed
+--- clean/lrzsz-0.12.20/intl/linux-msg.sed 1998-04-26 14:20:52.000000000 +0100
++++ lrzsz-0.12.20/intl/linux-msg.sed 1970-01-01 01:00:00.000000000 +0100
+@@ -1,100 +0,0 @@
+-# po2msg.sed - Convert Uniforum style .po file to Linux style .msg file
+-# Copyright (C) 1995 Free Software Foundation, Inc.
+-# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+-#
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-#
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-#
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+-#
+-#
+-# The first directive in the .msg should be the definition of the
+-# message set number. We use always set number 1.
+-#
+-1 {
+- i\
+-$set 1 # Automatically created by po2msg.sed
+- h
+- s/.*/0/
+- x
+-}
+-#
+-# Mitch's old catalog format does not allow comments.
+-#
+-# We copy the original message as a comment into the .msg file.
+-#
+-/^msgid/ {
+- s/msgid[ ]*"//
+-#
+-# This does not work now with the new format.
+-# /"$/! {
+-# s/\\$//
+-# s/$/ ... (more lines following)"/
+-# }
+- x
+-# The following nice solution is by
+-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
+- td
+-# Increment a decimal number in pattern space.
+-# First hide trailing `9' digits.
+- :d
+- s/9\(_*\)$/_\1/
+- td
+-# Assure at least one digit is available.
+- s/^\(_*\)$/0\1/
+-# Increment the last digit.
+- s/8\(_*\)$/9\1/
+- s/7\(_*\)$/8\1/
+- s/6\(_*\)$/7\1/
+- s/5\(_*\)$/6\1/
+- s/4\(_*\)$/5\1/
+- s/3\(_*\)$/4\1/
+- s/2\(_*\)$/3\1/
+- s/1\(_*\)$/2\1/
+- s/0\(_*\)$/1\1/
+-# Convert the hidden `9' digits to `0's.
+- s/_/0/g
+- x
+- G
+- s/\(.*\)"\n\([0-9]*\)/$ #\2 Original Message:(\1)/p
+-}
+-#
+-# The .msg file contains, other then the .po file, only the translations
+-# but each given a unique ID. Starting from 1 and incrementing by 1 for
+-# each message we assign them to the messages.
+-# It is important that the .po file used to generate the cat-id-tbl.c file
+-# (with po-to-tbl) is the same as the one used here. (At least the order
+-# of declarations must not be changed.)
+-#
+-/^msgstr/ {
+- s/msgstr[ ]*"\(.*\)"/# \1/
+-# Clear substitution flag.
+- tb
+-# Append the next line.
+- :b
+- N
+-# Look whether second part is continuation line.
+- s/\(.*\n\)"\(.*\)"/\1\2/
+-# Yes, then branch.
+- ta
+- P
+- D
+-# Note that D includes a jump to the start!!
+-# We found a continuation line. But before printing insert '\'.
+- :a
+- s/\(.*\)\(\n.*\)/\1\\\2/
+- P
+-# We cannot use D here.
+- s/.*\n\(.*\)/\1/
+- tb
+-}
+-d
+diff -uprN clean/lrzsz-0.12.20/intl/loadinfo.h lrzsz-0.12.20/intl/loadinfo.h
+--- clean/lrzsz-0.12.20/intl/loadinfo.h 1998-04-26 14:20:52.000000000 +0100
++++ lrzsz-0.12.20/intl/loadinfo.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,58 +0,0 @@
+-#ifndef PARAMS
+-# if __STDC__
+-# define PARAMS(args) args
+-# else
+-# define PARAMS(args) ()
+-# endif
+-#endif
+-
+-/* Encoding of locale name parts. */
+-#define CEN_REVISION 1
+-#define CEN_SPONSOR 2
+-#define CEN_SPECIAL 4
+-#define XPG_NORM_CODESET 8
+-#define XPG_CODESET 16
+-#define TERRITORY 32
+-#define CEN_AUDIENCE 64
+-#define XPG_MODIFIER 128
+-
+-#define CEN_SPECIFIC (CEN_REVISION|CEN_SPONSOR|CEN_SPECIAL|CEN_AUDIENCE)
+-#define XPG_SPECIFIC (XPG_CODESET|XPG_NORM_CODESET|XPG_MODIFIER)
+-
+-
+-struct loaded_l10nfile
+-{
+- const char *filename;
+- int decided;
+-
+- const void *data;
+-
+- struct loaded_l10nfile *next;
+- struct loaded_l10nfile *successor[1];
+-};
+-
+-
+-extern const char *_nl_normalize_codeset PARAMS ((const char *codeset,
+- size_t name_len));
+-
+-extern struct loaded_l10nfile *
+-_nl_make_l10nflist PARAMS ((struct loaded_l10nfile **l10nfile_list,
+- const char *dirlist, size_t dirlist_len, int mask,
+- const char *language, const char *territory,
+- const char *codeset,
+- const char *normalized_codeset,
+- const char *modifier, const char *special,
+- const char *sponsor, const char *revision,
+- const char *filename, int do_allocate));
+-
+-
+-extern const char *_nl_expand_alias PARAMS ((const char *name));
+-
+-extern int _nl_explode_name PARAMS ((char *name, const char **language,
+- const char **modifier,
+- const char **territory,
+- const char **codeset,
+- const char **normalized_codeset,
+- const char **special,
+- const char **sponsor,
+- const char **revision));
+diff -uprN clean/lrzsz-0.12.20/intl/loadmsgcat.c lrzsz-0.12.20/intl/loadmsgcat.c
+--- clean/lrzsz-0.12.20/intl/loadmsgcat.c 1998-04-26 14:22:37.000000000 +0100
++++ lrzsz-0.12.20/intl/loadmsgcat.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,199 +0,0 @@
+-/* Load needed message catalogs
+- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software Foundation,
+- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+-
+-#ifdef HAVE_CONFIG_H
+-# include <config.h>
+-#endif
+-
+-#include <fcntl.h>
+-#include <sys/types.h>
+-#include <sys/stat.h>
+-
+-#if defined STDC_HEADERS || defined _LIBC
+-# include <stdlib.h>
+-#endif
+-
+-#if defined HAVE_UNISTD_H || defined _LIBC
+-# include <unistd.h>
+-#endif
+-
+-#if (defined HAVE_MMAP && defined HAVE_MUNMAP) || defined _LIBC
+-# include <sys/mman.h>
+-#endif
+-
+-#include "gettext.h"
+-#include "gettextP.h"
+-
+-/* @@ end of prolog @@ */
+-
+-#ifdef _LIBC
+-/* Rename the non ISO C functions. This is required by the standard
+- because some ISO C functions will require linking with this object
+- file and the name space must not be polluted. */
+-# define fstat __fstat
+-# define open __open
+-# define close __close
+-# define read __read
+-# define mmap __mmap
+-# define munmap __munmap
+-#endif
+-
+-/* We need a sign, whether a new catalog was loaded, which can be associated
+- with all translations. This is important if the translations are
+- cached by one of GCC's features. */
+-int _nl_msg_cat_cntr = 0;
+-
+-
+-/* Load the message catalogs specified by FILENAME. If it is no valid
+- message catalog do nothing. */
+-void
+-_nl_load_domain (domain_file)
+- struct loaded_l10nfile *domain_file;
+-{
+- int fd;
+- struct stat st;
+- struct mo_file_header *data = (struct mo_file_header *) -1;
+-#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
+- || defined _LIBC
+- int use_mmap = 0;
+-#endif
+- struct loaded_domain *domain;
+-
+- domain_file->decided = 1;
+- domain_file->data = NULL;
+-
+- /* If the record does not represent a valid locale the FILENAME
+- might be NULL. This can happen when according to the given
+- specification the locale file name is different for XPG and CEN
+- syntax. */
+- if (domain_file->filename == NULL)
+- return;
+-
+- /* Try to open the addressed file. */
+- fd = open (domain_file->filename, O_RDONLY);
+- if (fd == -1)
+- return;
+-
+- /* We must know about the size of the file. */
+- if (fstat (fd, &st) != 0
+- && st.st_size < (off_t) sizeof (struct mo_file_header))
+- {
+- /* Something went wrong. */
+- close (fd);
+- return;
+- }
+-
+-#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
+- || defined _LIBC
+- /* Now we are ready to load the file. If mmap() is available we try
+- this first. If not available or it failed we try to load it. */
+- data = (struct mo_file_header *) mmap (NULL, st.st_size, PROT_READ,
+- MAP_PRIVATE, fd, 0);
+-
+- if (data != (struct mo_file_header *) -1)
+- {
+- /* mmap() call was successful. */
+- close (fd);
+- use_mmap = 1;
+- }
+-#endif
+-
+- /* If the data is not yet available (i.e. mmap'ed) we try to load
+- it manually. */
+- if (data == (struct mo_file_header *) -1)
+- {
+- off_t to_read;
+- char *read_ptr;
+-
+- data = (struct mo_file_header *) malloc (st.st_size);
+- if (data == NULL)
+- return;
+-
+- to_read = st.st_size;
+- read_ptr = (char *) data;
+- do
+- {
+- long int nb = (long int) read (fd, read_ptr, to_read);
+- if (nb == -1)
+- {
+- close (fd);
+- return;
+- }
+-
+- read_ptr += nb;
+- to_read -= nb;
+- }
+- while (to_read > 0);
+-
+- close (fd);
+- }
+-
+- /* Using the magic number we can test whether it really is a message
+- catalog file. */
+- if (data->magic != _MAGIC && data->magic != _MAGIC_SWAPPED)
+- {
+- /* The magic number is wrong: not a message catalog file. */
+-#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
+- || defined _LIBC
+- if (use_mmap)
+- munmap ((caddr_t) data, st.st_size);
+- else
+-#endif
+- free (data);
+- return;
+- }
+-
+- domain_file->data
+- = (struct loaded_domain *) malloc (sizeof (struct loaded_domain));
+- if (domain_file->data == NULL)
+- return;
+-
+- domain = (struct loaded_domain *) domain_file->data;
+- domain->data = (char *) data;
+- domain->must_swap = data->magic != _MAGIC;
+-
+- /* Fill in the information about the available tables. */
+- switch (W (domain->must_swap, data->revision))
+- {
+- case 0:
+- domain->nstrings = W (domain->must_swap, data->nstrings);
+- domain->orig_tab = (struct string_desc *)
+- ((char *) data + W (domain->must_swap, data->orig_tab_offset));
+- domain->trans_tab = (struct string_desc *)
+- ((char *) data + W (domain->must_swap, data->trans_tab_offset));
+- domain->hash_size = W (domain->must_swap, data->hash_tab_size);
+- domain->hash_tab = (nls_uint32 *)
+- ((char *) data + W (domain->must_swap, data->hash_tab_offset));
+- break;
+- default:
+- /* This is an illegal revision. */
+-#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
+- || defined _LIBC
+- if (use_mmap)
+- munmap ((caddr_t) data, st.st_size);
+- else
+-#endif
+- free (data);
+- free (domain);
+- domain_file->data = NULL;
+- return;
+- }
+-
+- /* Show that one domain is changed. This might make some cached
+- translations invalid. */
+- ++_nl_msg_cat_cntr;
+-}
+diff -uprN clean/lrzsz-0.12.20/intl/localealias.c lrzsz-0.12.20/intl/localealias.c
+--- clean/lrzsz-0.12.20/intl/localealias.c 1998-04-26 14:22:37.000000000 +0100
++++ lrzsz-0.12.20/intl/localealias.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,378 +0,0 @@
+-/* Handle aliases for locale names
+- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+- Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software Foundation,
+- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+-
+-#ifdef HAVE_CONFIG_H
+-# include <config.h>
+-#endif
+-
+-#include <ctype.h>
+-#include <stdio.h>
+-#include <sys/types.h>
+-
+-#ifdef __GNUC__
+-# define alloca __builtin_alloca
+-# define HAVE_ALLOCA 1
+-#else
+-# if defined HAVE_ALLOCA_H || defined _LIBC
+-# include <alloca.h>
+-# else
+-# ifdef _AIX
+- #pragma alloca
+-# else
+-# ifndef alloca
+-char *alloca ();
+-# endif
+-# endif
+-# endif
+-#endif
+-
+-#if defined STDC_HEADERS || defined _LIBC
+-# include <stdlib.h>
+-#else
+-char *getenv ();
+-# ifdef HAVE_MALLOC_H
+-# include <malloc.h>
+-# else
+-void free ();
+-# endif
+-#endif
+-
+-#if defined HAVE_STRING_H || defined _LIBC
+-# ifndef _GNU_SOURCE
+-# define _GNU_SOURCE 1
+-# endif
+-# include <string.h>
+-#else
+-# include <strings.h>
+-# ifndef memcpy
+-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
+-# endif
+-#endif
+-#if !HAVE_STRCHR && !defined _LIBC
+-# ifndef strchr
+-# define strchr index
+-# endif
+-#endif
+-
+-#include "gettext.h"
+-#include "gettextP.h"
+-
+-/* @@ end of prolog @@ */
+-
+-#ifdef _LIBC
+-/* Rename the non ANSI C functions. This is required by the standard
+- because some ANSI C functions will require linking with this object
+- file and the name space must not be polluted. */
+-# define strcasecmp __strcasecmp
+-#endif
+-
+-
+-/* For those loosing systems which don't have `alloca' we have to add
+- some additional code emulating it. */
+-#ifdef HAVE_ALLOCA
+-/* Nothing has to be done. */
+-# define ADD_BLOCK(list, address) /* nothing */
+-# define FREE_BLOCKS(list) /* nothing */
+-#else
+-struct block_list
+-{
+- void *address;
+- struct block_list *next;
+-};
+-# define ADD_BLOCK(list, addr) \
+- do { \
+- struct block_list *newp = (struct block_list *) malloc (sizeof (*newp)); \
+- /* If we cannot get a free block we cannot add the new element to \
+- the list. */ \
+- if (newp != NULL) { \
+- newp->address = (addr); \
+- newp->next = (list); \
+- (list) = newp; \
+- } \
+- } while (0)
+-# define FREE_BLOCKS(list) \
+- do { \
+- while (list != NULL) { \
+- struct block_list *old = list; \
+- list = list->next; \
+- free (old); \
+- } \
+- } while (0)
+-# undef alloca
+-# define alloca(size) (malloc (size))
+-#endif /* have alloca */
+-
+-
+-struct alias_map
+-{
+- const char *alias;
+- const char *value;
+-};
+-
+-
+-static struct alias_map *map;
+-static size_t nmap = 0;
+-static size_t maxmap = 0;
+-
+-
+-/* Prototypes for local functions. */
+-static size_t read_alias_file PARAMS ((const char *fname, int fname_len));
+-static void extend_alias_table PARAMS ((void));
+-static int alias_compare PARAMS ((const struct alias_map *map1,
+- const struct alias_map *map2));
+-
+-
+-const char *
+-_nl_expand_alias (name)
+- const char *name;
+-{
+- static const char *locale_alias_path = LOCALE_ALIAS_PATH;
+- struct alias_map *retval;
+- size_t added;
+-
+- do
+- {
+- struct alias_map item;
+-
+- item.alias = name;
+-
+- if (nmap > 0)
+- retval = (struct alias_map *) bsearch (&item, map, nmap,
+- sizeof (struct alias_map),
+- (int (*) PARAMS ((const void *,
+- const void *))
+- ) alias_compare);
+- else
+- retval = NULL;
+-
+- /* We really found an alias. Return the value. */
+- if (retval != NULL)
+- return retval->value;
+-
+- /* Perhaps we can find another alias file. */
+- added = 0;
+- while (added == 0 && locale_alias_path[0] != '\0')
+- {
+- const char *start;
+-
+- while (locale_alias_path[0] == ':')
+- ++locale_alias_path;
+- start = locale_alias_path;
+-
+- while (locale_alias_path[0] != '\0' && locale_alias_path[0] != ':')
+- ++locale_alias_path;
+-
+- if (start < locale_alias_path)
+- added = read_alias_file (start, locale_alias_path - start);
+- }
+- }
+- while (added != 0);
+-
+- return NULL;
+-}
+-
+-
+-static size_t
+-read_alias_file (fname, fname_len)
+- const char *fname;
+- int fname_len;
+-{
+-#ifndef HAVE_ALLOCA
+- struct block_list *block_list = NULL;
+-#endif
+- FILE *fp;
+- char *full_fname;
+- size_t added;
+- static const char aliasfile[] = "/locale.alias";
+-
+- full_fname = (char *) alloca (fname_len + sizeof aliasfile);
+- ADD_BLOCK (block_list, full_fname);
+- memcpy (full_fname, fname, fname_len);
+- memcpy (&full_fname[fname_len], aliasfile, sizeof aliasfile);
+-
+- fp = fopen (full_fname, "r");
+- if (fp == NULL)
+- {
+- FREE_BLOCKS (block_list);
+- return 0;
+- }
+-
+- added = 0;
+- while (!feof (fp))
+- {
+- /* It is a reasonable approach to use a fix buffer here because
+- a) we are only interested in the first two fields
+- b) these fields must be usable as file names and so must not
+- be that long
+- */
+- char buf[BUFSIZ];
+- char *alias;
+- char *value;
+- char *cp;
+-
+- if (fgets (buf, BUFSIZ, fp) == NULL)
+- /* EOF reached. */
+- break;
+-
+- cp = buf;
+- /* Ignore leading white space. */
+- while (isspace (cp[0]))
+- ++cp;
+-
+- /* A leading '#' signals a comment line. */
+- if (cp[0] != '\0' && cp[0] != '#')
+- {
+- alias = cp++;
+- while (cp[0] != '\0' && !isspace (cp[0]))
+- ++cp;
+- /* Terminate alias name. */
+- if (cp[0] != '\0')
+- *cp++ = '\0';
+-
+- /* Now look for the beginning of the value. */
+- while (isspace (cp[0]))
+- ++cp;
+-
+- if (cp[0] != '\0')
+- {
+- char *tp;
+- size_t len;
+-
+- value = cp++;
+- while (cp[0] != '\0' && !isspace (cp[0]))
+- ++cp;
+- /* Terminate value. */
+- if (cp[0] == '\n')
+- {
+- /* This has to be done to make the following test
+- for the end of line possible. We are looking for
+- the terminating '\n' which do not overwrite here. */
+- *cp++ = '\0';
+- *cp = '\n';
+- }
+- else if (cp[0] != '\0')
+- *cp++ = '\0';
+-
+- if (nmap >= maxmap)
+- extend_alias_table ();
+-
+- /* We cannot depend on strdup available in the libc. Sigh! */
+- len = strlen (alias) + 1;
+- tp = (char *) malloc (len);
+- if (tp == NULL)
+- {
+- FREE_BLOCKS (block_list);
+- return added;
+- }
+- memcpy (tp, alias, len);
+- map[nmap].alias = tp;
+-
+- len = strlen (value) + 1;
+- tp = (char *) malloc (len);
+- if (tp == NULL)
+- {
+- FREE_BLOCKS (block_list);
+- return added;
+- }
+- memcpy (tp, value, len);
+- map[nmap].value = tp;
+-
+- ++nmap;
+- ++added;
+- }
+- }
+-
+- /* Possibly not the whole line fits into the buffer. Ignore
+- the rest of the line. */
+- while (strchr (cp, '\n') == NULL)
+- {
+- cp = buf;
+- if (fgets (buf, BUFSIZ, fp) == NULL)
+- /* Make sure the inner loop will be left. The outer loop
+- will exit at the `feof' test. */
+- *cp = '\n';
+- }
+- }
+-
+- /* Should we test for ferror()? I think we have to silently ignore
+- errors. --drepper */
+- fclose (fp);
+-
+- if (added > 0)
+- qsort (map, nmap, sizeof (struct alias_map),
+- (int (*) PARAMS ((const void *, const void *))) alias_compare);
+-
+- FREE_BLOCKS (block_list);
+- return added;
+-}
+-
+-
+-static void
+-extend_alias_table ()
+-{
+- size_t new_size;
+- struct alias_map *new_map;
+-
+- new_size = maxmap == 0 ? 100 : 2 * maxmap;
+- new_map = (struct alias_map *) malloc (new_size
+- * sizeof (struct alias_map));
+- if (new_map == NULL)
+- /* Simply don't extend: we don't have any more core. */
+- return;
+-
+- memcpy (new_map, map, nmap * sizeof (struct alias_map));
+-
+- if (maxmap != 0)
+- free (map);
+-
+- map = new_map;
+- maxmap = new_size;
+-}
+-
+-
+-static int
+-alias_compare (map1, map2)
+- const struct alias_map *map1;
+- const struct alias_map *map2;
+-{
+-#if defined _LIBC || defined HAVE_STRCASECMP
+- return strcasecmp (map1->alias, map2->alias);
+-#else
+- const unsigned char *p1 = (const unsigned char *) map1->alias;
+- const unsigned char *p2 = (const unsigned char *) map2->alias;
+- unsigned char c1, c2;
+-
+- if (p1 == p2)
+- return 0;
+-
+- do
+- {
+- /* I know this seems to be odd but the tolower() function in
+- some systems libc cannot handle nonalpha characters. */
+- c1 = isupper (*p1) ? tolower (*p1) : *p1;
+- c2 = isupper (*p2) ? tolower (*p2) : *p2;
+- if (c1 == '\0')
+- break;
+- ++p1;
+- ++p2;
+- }
+- while (c1 == c2);
+-
+- return c1 - c2;
+-#endif
+-}
+diff -uprN clean/lrzsz-0.12.20/intl/Makefile.in lrzsz-0.12.20/intl/Makefile.in
+--- clean/lrzsz-0.12.20/intl/Makefile.in 1998-04-26 14:22:35.000000000 +0100
++++ lrzsz-0.12.20/intl/Makefile.in 1970-01-01 01:00:00.000000000 +0100
+@@ -1,214 +0,0 @@
+-# Makefile for directory with message catalog handling in GNU NLS Utilities.
+-# Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+-#
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-#
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-#
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+-
+-PACKAGE = @PACKAGE@
+-VERSION = @VERSION@
+-
+-SHELL = /bin/sh
+-
+-srcdir = @srcdir@
+-top_srcdir = @top_srcdir@
+-top_builddir = ..
+-VPATH = @srcdir@
+-
+-prefix = @prefix@
+-exec_prefix = @exec_prefix@
+-transform = @program_transform_name@
+-libdir = $(exec_prefix)/lib
+-includedir = $(prefix)/include
+-datadir = $(prefix)/@DATADIRNAME@
+-localedir = $(datadir)/locale
+-gnulocaledir = $(prefix)/share/locale
+-gettextsrcdir = @datadir@/gettext/intl
+-aliaspath = $(localedir):.
+-subdir = intl
+-
+-INSTALL = @INSTALL@
+-INSTALL_DATA = @INSTALL_DATA@
+-MKINSTALLDIRS = @MKINSTALLDIRS@
+-
+-l = @l@
+-
+-AR = ar
+-CC = @CC@
+-LIBTOOL = @LIBTOOL@
+-RANLIB = @RANLIB@
+-
+-DEFS = -DLOCALEDIR=\"$(localedir)\" -DGNULOCALEDIR=\"$(gnulocaledir)\" \
+--DLOCALE_ALIAS_PATH=\"$(aliaspath)\" @DEFS@
+-CPPFLAGS = @CPPFLAGS@
+-CFLAGS = @CFLAGS@
+-LDFLAGS = @LDFLAGS@
+-
+-COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS)
+-
+-HEADERS = $(COMHDRS) libgettext.h loadinfo.h
+-COMHDRS = gettext.h gettextP.h hash-string.h
+-SOURCES = $(COMSRCS) intl-compat.c cat-compat.c
+-COMSRCS = bindtextdom.c dcgettext.c dgettext.c gettext.c \
+-finddomain.c loadmsgcat.c localealias.c textdomain.c l10nflist.c \
+-explodename.c
+-OBJECTS = @INTLOBJS@ bindtextdom.$lo dcgettext.$lo dgettext.$lo gettext.$lo \
+-finddomain.$lo loadmsgcat.$lo localealias.$lo textdomain.$lo l10nflist.$lo \
+-explodename.$lo
+-CATOBJS = cat-compat.$lo ../po/cat-id-tbl.$lo
+-GETTOBJS = intl-compat.$lo
+-DISTFILES.common = ChangeLog Makefile.in linux-msg.sed po2tbl.sed.in \
+-xopen-msg.sed $(HEADERS) $(SOURCES)
+-DISTFILES.normal = VERSION
+-DISTFILES.gettext = libintl.glibc intlh.inst.in
+-
+-.SUFFIXES:
+-.SUFFIXES: .c .o .lo
+-.c.o:
+- $(COMPILE) $<
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) $<
+-
+-INCLUDES = -I.. -I. -I$(top_srcdir)/intl -I$(top_srcdir)/lib
+-
+-all: all-@USE_INCLUDED_LIBINTL@
+-
+-all-yes: libintl.$la intlh.inst
+-all-no:
+-
+-libintl.a: $(OBJECTS)
+- rm -f $@
+- $(AR) cru $@ $(OBJECTS)
+- $(RANLIB) $@
+-
+-libintl.la: $(OBJECTS)
+- $(LIBTOOL) --mode=link $(CC) $(LDFLAGS) -o $@ $(OBJECTS) \
+- -version-info 1:0 -rpath $(libdir)
+-
+-../po/cat-id-tbl.$lo: ../po/cat-id-tbl.c $(top_srcdir)/po/$(PACKAGE).pot
+- cd ../po && $(MAKE) cat-id-tbl.$lo
+-
+-check: all
+-
+-# This installation goal is only used in GNU gettext. Packages which
+-# only use the library should use install instead.
+-
+-# We must not install the libintl.h/libintl.a files if we are on a
+-# system which has the gettext() function in its C library or in a
+-# separate library or use the catgets interface. A special case is
+-# where configure found a previously installed GNU gettext library.
+-# If you want to use the one which comes with this version of the
+-# package, you have to use `configure --with-included-gettext'.
+-install: install-exec install-data
+-install-exec: all
+- if test "$(PACKAGE)" = "gettext" \
+- && test '@INTLOBJS@' = '$(GETTOBJS)'; then \
+- if test -r $(MKINSTALLDIRS); then \
+- $(MKINSTALLDIRS) $(libdir) $(includedir); \
+- else \
+- $(top_srcdir)/mkinstalldirs $(libdir) $(includedir); \
+- fi; \
+- $(INSTALL_DATA) intlh.inst $(includedir)/libintl.h; \
+- $(INSTALL_DATA) libintl.a $(libdir)/libintl.a; \
+- else \
+- : ; \
+- fi
+-install-data: all
+- if test "$(PACKAGE)" = "gettext"; then \
+- if test -r $(MKINSTALLDIRS); then \
+- $(MKINSTALLDIRS) $(gettextsrcdir); \
+- else \
+- $(top_srcdir)/mkinstalldirs $(gettextsrcdir); \
+- fi; \
+- $(INSTALL_DATA) VERSION $(gettextsrcdir)/VERSION; \
+- dists="$(DISTFILES.common)"; \
+- for file in $$dists; do \
+- $(INSTALL_DATA) $(srcdir)/$$file $(gettextsrcdir)/$$file; \
+- done; \
+- else \
+- : ; \
+- fi
+-
+-# Define this as empty until I found a useful application.
+-installcheck:
+-
+-uninstall:
+- dists="$(DISTFILES.common)"; \
+- for file in $$dists; do \
+- rm -f $(gettextsrcdir)/$$file; \
+- done
+-
+-info dvi:
+-
+-$(OBJECTS): ../config.h libgettext.h
+-bindtextdom.$lo finddomain.$lo loadmsgcat.$lo: gettextP.h gettext.h loadinfo.h
+-dcgettext.$lo: gettextP.h gettext.h hash-string.h loadinfo.h
+-
+-tags: TAGS
+-
+-TAGS: $(HEADERS) $(SOURCES)
+- here=`pwd`; cd $(srcdir) && etags -o $$here/TAGS $(HEADERS) $(SOURCES)
+-
+-id: ID
+-
+-ID: $(HEADERS) $(SOURCES)
+- here=`pwd`; cd $(srcdir) && mkid -f$$here/ID $(HEADERS) $(SOURCES)
+-
+-
+-mostlyclean:
+- rm -f *.a *.o *.lo core core.*
+-
+-clean: mostlyclean
+-
+-distclean: clean
+- rm -f Makefile ID TAGS po2msg.sed po2tbl.sed libintl.h
+-
+-maintainer-clean: distclean
+- @echo "This command is intended for maintainers to use;"
+- @echo "it deletes files that may require special tools to rebuild."
+-
+-
+-# GNU gettext needs not contain the file `VERSION' but contains some
+-# other files which should not be distributed in other packages.
+-distdir = ../$(PACKAGE)-$(VERSION)/$(subdir)
+-dist distdir: Makefile $(DISTFILES)
+- if test "$(PACKAGE)" = gettext; then \
+- additional="$(DISTFILES.gettext)"; \
+- else \
+- additional="$(DISTFILES.normal)"; \
+- fi; \
+- for file in $(DISTFILES.common) $$additional; do \
+- ln $(srcdir)/$$file $(distdir) 2> /dev/null \
+- || cp -p $(srcdir)/$$file $(distdir); \
+- done
+-
+-dist-libc:
+- tar zcvf intl-glibc.tar.gz $(COMSRCS) $(COMHDRS) libintl.h.glibc
+-
+-Makefile: Makefile.in ../config.status
+- cd .. \
+- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+-
+-# The dependency for intlh.inst is different in gettext and all other
+-# packages. Because we cannot you GNU make features we have to solve
+-# the problem while rewriting Makefile.in.
+-@GT_YES@intlh.inst: intlh.inst.in ../config.status
+-@GT_YES@ cd .. \
+-@GT_YES@ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= \
+-@GT_YES@ $(SHELL) ./config.status
+-@GT_NO@.PHONY: intlh.inst
+-@GT_NO@intlh.inst:
+-
+-# Tell versions [3.59,3.63) of GNU make not to export all variables.
+-# Otherwise a system limit (for SysV at least) may be exceeded.
+-.NOEXPORT:
+diff -uprN clean/lrzsz-0.12.20/intl/po2tbl.sed.in lrzsz-0.12.20/intl/po2tbl.sed.in
+--- clean/lrzsz-0.12.20/intl/po2tbl.sed.in 1998-04-26 14:20:52.000000000 +0100
++++ lrzsz-0.12.20/intl/po2tbl.sed.in 1970-01-01 01:00:00.000000000 +0100
+@@ -1,102 +0,0 @@
+-# po2tbl.sed - Convert Uniforum style .po file to lookup table for catgets
+-# Copyright (C) 1995 Free Software Foundation, Inc.
+-# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+-#
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-#
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-#
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+-#
+-1 {
+- i\
+-/* Automatically generated by po2tbl.sed from @PACKAGE NAME@.pot. */\
+-\
+-#if HAVE_CONFIG_H\
+-# include <config.h>\
+-#endif\
+-\
+-#include "libgettext.h"\
+-\
+-const struct _msg_ent _msg_tbl[] = {
+- h
+- s/.*/0/
+- x
+-}
+-#
+-# Write msgid entries in C array form.
+-#
+-/^msgid/ {
+- s/msgid[ ]*\(".*"\)/ {\1/
+- tb
+-# Append the next line
+- :b
+- N
+-# Look whether second part is continuation line.
+- s/\(.*\)"\(\n\)"\(.*"\)/\1\2\3/
+-# Yes, then branch.
+- ta
+-# Because we assume that the input file correctly formed the line
+-# just read cannot be again be a msgid line. So it's safe to ignore
+-# it.
+- s/\(.*\)\n.*/\1/
+- bc
+-# We found a continuation line. But before printing insert '\'.
+- :a
+- s/\(.*\)\(\n.*\)/\1\\\2/
+- P
+-# We cannot use D here.
+- s/.*\n\(.*\)/\1/
+-# Some buggy seds do not clear the `successful substitution since last ``t'''
+-# flag on `N', so we do a `t' here to clear it.
+- tb
+-# Not reached
+- :c
+- x
+-# The following nice solution is by
+-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
+- td
+-# Increment a decimal number in pattern space.
+-# First hide trailing `9' digits.
+- :d
+- s/9\(_*\)$/_\1/
+- td
+-# Assure at least one digit is available.
+- s/^\(_*\)$/0\1/
+-# Increment the last digit.
+- s/8\(_*\)$/9\1/
+- s/7\(_*\)$/8\1/
+- s/6\(_*\)$/7\1/
+- s/5\(_*\)$/6\1/
+- s/4\(_*\)$/5\1/
+- s/3\(_*\)$/4\1/
+- s/2\(_*\)$/3\1/
+- s/1\(_*\)$/2\1/
+- s/0\(_*\)$/1\1/
+-# Convert the hidden `9' digits to `0's.
+- s/_/0/g
+- x
+- G
+- s/\(.*\)\n\([0-9]*\)/\1, \2},/
+- s/\(.*\)"$/\1/
+- p
+-}
+-#
+-# Last line.
+-#
+-$ {
+- i\
+-};\
+-
+- g
+- s/0*\(.*\)/int _msg_tbl_length = \1;/p
+-}
+-d
+diff -uprN clean/lrzsz-0.12.20/intl/textdomain.c lrzsz-0.12.20/intl/textdomain.c
+--- clean/lrzsz-0.12.20/intl/textdomain.c 1998-04-26 14:22:37.000000000 +0100
++++ lrzsz-0.12.20/intl/textdomain.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,106 +0,0 @@
+-/* Implementation of the textdomain(3) function
+- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+- Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software Foundation,
+- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+-
+-#ifdef HAVE_CONFIG_H
+-# include <config.h>
+-#endif
+-
+-#if defined STDC_HEADERS || defined _LIBC
+-# include <stdlib.h>
+-#endif
+-
+-#if defined STDC_HEADERS || defined HAVE_STRING_H || defined _LIBC
+-# include <string.h>
+-#else
+-# include <strings.h>
+-# ifndef memcpy
+-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
+-# endif
+-#endif
+-
+-#ifdef _LIBC
+-# include <libintl.h>
+-#else
+-# include "libgettext.h"
+-#endif
+-
+-/* @@ end of prolog @@ */
+-
+-/* Name of the default text domain. */
+-extern const char _nl_default_default_domain[];
+-
+-/* Default text domain in which entries for gettext(3) are to be found. */
+-extern const char *_nl_current_default_domain;
+-
+-
+-/* Names for the libintl functions are a problem. They must not clash
+- with existing names and they should follow ANSI C. But this source
+- code is also used in GNU C Library where the names have a __
+- prefix. So we have to make a difference here. */
+-#ifdef _LIBC
+-# define TEXTDOMAIN __textdomain
+-# define strdup(str) __strdup (str)
+-#else
+-# define TEXTDOMAIN textdomain__
+-#endif
+-
+-/* Set the current default message catalog to DOMAINNAME.
+- If DOMAINNAME is null, return the current default.
+- If DOMAINNAME is "", reset to the default of "messages". */
+-char *
+-TEXTDOMAIN (domainname)
+- const char *domainname;
+-{
+- char *old;
+-
+- /* A NULL pointer requests the current setting. */
+- if (domainname == NULL)
+- return (char *) _nl_current_default_domain;
+-
+- old = (char *) _nl_current_default_domain;
+-
+- /* If domain name is the null string set to default domain "messages". */
+- if (domainname[0] == '\0'
+- || strcmp (domainname, _nl_default_default_domain) == 0)
+- _nl_current_default_domain = _nl_default_default_domain;
+- else
+- {
+- /* If the following malloc fails `_nl_current_default_domain'
+- will be NULL. This value will be returned and so signals we
+- are out of core. */
+-#if defined _LIBC || defined HAVE_STRDUP
+- _nl_current_default_domain = strdup (domainname);
+-#else
+- size_t len = strlen (domainname) + 1;
+- char *cp = (char *) malloc (len);
+- if (cp != NULL)
+- memcpy (cp, domainname, len);
+- _nl_current_default_domain = cp;
+-#endif
+- }
+-
+- if (old != _nl_default_default_domain)
+- free (old);
+-
+- return (char *) _nl_current_default_domain;
+-}
+-
+-#ifdef _LIBC
+-/* Alias for function name in GNU C Library. */
+-weak_alias (__textdomain, textdomain);
+-#endif
+diff -uprN clean/lrzsz-0.12.20/intl/VERSION lrzsz-0.12.20/intl/VERSION
+--- clean/lrzsz-0.12.20/intl/VERSION 1998-04-26 14:22:37.000000000 +0100
++++ lrzsz-0.12.20/intl/VERSION 1970-01-01 01:00:00.000000000 +0100
+@@ -1 +0,0 @@
+-GNU gettext library from gettext-0.10.32
+diff -uprN clean/lrzsz-0.12.20/intl/xopen-msg.sed lrzsz-0.12.20/intl/xopen-msg.sed
+--- clean/lrzsz-0.12.20/intl/xopen-msg.sed 1998-04-26 14:20:52.000000000 +0100
++++ lrzsz-0.12.20/intl/xopen-msg.sed 1970-01-01 01:00:00.000000000 +0100
+@@ -1,104 +0,0 @@
+-# po2msg.sed - Convert Uniforum style .po file to X/Open style .msg file
+-# Copyright (C) 1995 Free Software Foundation, Inc.
+-# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+-#
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-#
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-#
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+-#
+-#
+-# The first directive in the .msg should be the definition of the
+-# message set number. We use always set number 1.
+-#
+-1 {
+- i\
+-$set 1 # Automatically created by po2msg.sed
+- h
+- s/.*/0/
+- x
+-}
+-#
+-# We copy all comments into the .msg file. Perhaps they can help.
+-#
+-/^#/ s/^#[ ]*/$ /p
+-#
+-# We copy the original message as a comment into the .msg file.
+-#
+-/^msgid/ {
+-# Does not work now
+-# /"$/! {
+-# s/\\$//
+-# s/$/ ... (more lines following)"/
+-# }
+- s/^msgid[ ]*"\(.*\)"$/$ Original Message: \1/
+- p
+-}
+-#
+-# The .msg file contains, other then the .po file, only the translations
+-# but each given a unique ID. Starting from 1 and incrementing by 1 for
+-# each message we assign them to the messages.
+-# It is important that the .po file used to generate the cat-id-tbl.c file
+-# (with po-to-tbl) is the same as the one used here. (At least the order
+-# of declarations must not be changed.)
+-#
+-/^msgstr/ {
+- s/msgstr[ ]*"\(.*\)"/\1/
+- x
+-# The following nice solution is by
+-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
+- td
+-# Increment a decimal number in pattern space.
+-# First hide trailing `9' digits.
+- :d
+- s/9\(_*\)$/_\1/
+- td
+-# Assure at least one digit is available.
+- s/^\(_*\)$/0\1/
+-# Increment the last digit.
+- s/8\(_*\)$/9\1/
+- s/7\(_*\)$/8\1/
+- s/6\(_*\)$/7\1/
+- s/5\(_*\)$/6\1/
+- s/4\(_*\)$/5\1/
+- s/3\(_*\)$/4\1/
+- s/2\(_*\)$/3\1/
+- s/1\(_*\)$/2\1/
+- s/0\(_*\)$/1\1/
+-# Convert the hidden `9' digits to `0's.
+- s/_/0/g
+- x
+-# Bring the line in the format `<number> <message>'
+- G
+- s/^[^\n]*$/& /
+- s/\(.*\)\n\([0-9]*\)/\2 \1/
+-# Clear flag from last substitution.
+- tb
+-# Append the next line.
+- :b
+- N
+-# Look whether second part is a continuation line.
+- s/\(.*\n\)"\(.*\)"/\1\2/
+-# Yes, then branch.
+- ta
+- P
+- D
+-# Note that `D' includes a jump to the start!!
+-# We found a continuation line. But before printing insert '\'.
+- :a
+- s/\(.*\)\(\n.*\)/\1\\\2/
+- P
+-# We cannot use the sed command `D' here
+- s/.*\n\(.*\)/\1/
+- tb
+-}
+-d
+diff -uprN clean/lrzsz-0.12.20/lib/Makefile.am lrzsz-0.12.20/lib/Makefile.am
+--- clean/lrzsz-0.12.20/lib/Makefile.am 1998-12-27 16:25:26.000000000 +0000
++++ lrzsz-0.12.20/lib/Makefile.am 2019-11-25 16:22:34.000000000 +0000
+@@ -1,6 +1,4 @@
+ noinst_LIBRARIES=libzmodem.a
+-CFLAGS=@CFLAGS@
+-AUTOMAKE_OPTIONS=ansi2knr
+
+ EXTRA_DIST = alloca.c ansi2knr.1 ansi2knr.c \
+ getopt.c getopt1.c mkdir.c mktime.c \
+diff -uprN clean/lrzsz-0.12.20/lib/Makefile.in lrzsz-0.12.20/lib/Makefile.in
+--- clean/lrzsz-0.12.20/lib/Makefile.in 1998-12-30 16:31:43.000000000 +0000
++++ lrzsz-0.12.20/lib/Makefile.in 2019-11-26 11:37:46.000000000 +0000
+@@ -1,6 +1,8 @@
+-# Makefile.in generated automatically by automake 1.3 from Makefile.am
++# Makefile.in generated by automake 1.16.1 from Makefile.am.
++# @configure_input@
++
++# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -10,340 +12,623 @@
+ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+
++@SET_MAKE@
+
+-SHELL = /bin/sh
+
+-srcdir = @srcdir@
+-top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+-prefix = @prefix@
+-exec_prefix = @exec_prefix@
+-
+-bindir = @bindir@
+-sbindir = @sbindir@
+-libexecdir = @libexecdir@
+-datadir = @datadir@
+-sysconfdir = @sysconfdir@
+-sharedstatedir = @sharedstatedir@
+-localstatedir = @localstatedir@
+-libdir = @libdir@
+-infodir = @infodir@
+-mandir = @mandir@
+-includedir = @includedir@
+-oldincludedir = /usr/include
+-
+-DISTDIR =
+-
++am__is_gnu_make = { \
++ if test -z '$(MAKELEVEL)'; then \
++ false; \
++ elif test -n '$(MAKE_HOST)'; then \
++ true; \
++ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
++ true; \
++ else \
++ false; \
++ fi; \
++}
++am__make_running_with_option = \
++ case $${target_option-} in \
++ ?) ;; \
++ *) echo "am__make_running_with_option: internal error: invalid" \
++ "target option '$${target_option-}' specified" >&2; \
++ exit 1;; \
++ esac; \
++ has_opt=no; \
++ sane_makeflags=$$MAKEFLAGS; \
++ if $(am__is_gnu_make); then \
++ sane_makeflags=$$MFLAGS; \
++ else \
++ case $$MAKEFLAGS in \
++ *\\[\ \ ]*) \
++ bs=\\; \
++ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
++ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
++ esac; \
++ fi; \
++ skip_next=no; \
++ strip_trailopt () \
++ { \
++ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
++ }; \
++ for flg in $$sane_makeflags; do \
++ test $$skip_next = yes && { skip_next=no; continue; }; \
++ case $$flg in \
++ *=*|--*) continue;; \
++ -*I) strip_trailopt 'I'; skip_next=yes;; \
++ -*I?*) strip_trailopt 'I';; \
++ -*O) strip_trailopt 'O'; skip_next=yes;; \
++ -*O?*) strip_trailopt 'O';; \
++ -*l) strip_trailopt 'l'; skip_next=yes;; \
++ -*l?*) strip_trailopt 'l';; \
++ -[dEDm]) skip_next=yes;; \
++ -[JT]) skip_next=yes;; \
++ esac; \
++ case $$flg in \
++ *$$target_option*) has_opt=yes; break;; \
++ esac; \
++ done; \
++ test $$has_opt = yes
++am__make_dryrun = (target_option=n; $(am__make_running_with_option))
++am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+ pkgdatadir = $(datadir)/@PACKAGE@
+-pkglibdir = $(libdir)/@PACKAGE@
+ pkgincludedir = $(includedir)/@PACKAGE@
+-
+-top_builddir = ..
+-
+-ACLOCAL = @ACLOCAL@
+-AUTOCONF = @AUTOCONF@
+-AUTOMAKE = @AUTOMAKE@
+-AUTOHEADER = @AUTOHEADER@
+-
+-INSTALL = @INSTALL@
+-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+-INSTALL_DATA = @INSTALL_DATA@
+-INSTALL_SCRIPT = @INSTALL_SCRIPT@
+-transform = @program_transform_name@
+-
++pkglibdir = $(libdir)/@PACKAGE@
++pkglibexecdir = $(libexecdir)/@PACKAGE@
++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
++install_sh_DATA = $(install_sh) -c -m 644
++install_sh_PROGRAM = $(install_sh) -c
++install_sh_SCRIPT = $(install_sh) -c
++INSTALL_HEADER = $(INSTALL_DATA)
++transform = $(program_transform_name)
+ NORMAL_INSTALL = :
+ PRE_INSTALL = :
+ POST_INSTALL = :
+ NORMAL_UNINSTALL = :
+ PRE_UNINSTALL = :
+ POST_UNINSTALL = :
+-CATALOGS = @CATALOGS@
+-CATOBJEXT = @CATOBJEXT@
++build_triplet = @build@
++host_triplet = @host@
++subdir = lib
++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
++am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
++ $(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
++ $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
++ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
++ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
++ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
++ $(top_srcdir)/configure.in
++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
++ $(ACLOCAL_M4)
++DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \
++ $(am__DIST_COMMON)
++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
++CONFIG_HEADER = $(top_builddir)/config.h
++CONFIG_CLEAN_FILES =
++CONFIG_CLEAN_VPATH_FILES =
++LIBRARIES = $(noinst_LIBRARIES)
++AR = ar
++ARFLAGS = cru
++AM_V_AR = $(am__v_AR_@AM_V@)
++am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
++am__v_AR_0 = @echo " AR " $@;
++am__v_AR_1 =
++libzmodem_a_AR = $(AR) $(ARFLAGS)
++am_libzmodem_a_OBJECTS = long-options.$(OBJEXT) xstrtol.$(OBJEXT) \
++ xstrtoul.$(OBJEXT) error.$(OBJEXT)
++libzmodem_a_OBJECTS = $(am_libzmodem_a_OBJECTS)
++AM_V_P = $(am__v_P_@AM_V@)
++am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
++am__v_P_0 = false
++am__v_P_1 = :
++AM_V_GEN = $(am__v_GEN_@AM_V@)
++am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
++am__v_GEN_0 = @echo " GEN " $@;
++am__v_GEN_1 =
++AM_V_at = $(am__v_at_@AM_V@)
++am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
++am__v_at_0 = @
++am__v_at_1 =
++DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
++depcomp = $(SHELL) $(top_srcdir)/depcomp
++am__maybe_remake_depfiles = depfiles
++am__depfiles_remade = $(DEPDIR)/mkdir.Po $(DEPDIR)/mktime.Po \
++ $(DEPDIR)/stpcpy.Po $(DEPDIR)/strdup.Po $(DEPDIR)/strerror.Po \
++ $(DEPDIR)/strftime.Po $(DEPDIR)/strpbrk.Po $(DEPDIR)/strstr.Po \
++ $(DEPDIR)/strtol.Po $(DEPDIR)/strtoul.Po \
++ $(DEPDIR)/vasprintf.Po ./$(DEPDIR)/alloca.Po \
++ ./$(DEPDIR)/error.Po ./$(DEPDIR)/long-options.Po \
++ ./$(DEPDIR)/xstrtol.Po ./$(DEPDIR)/xstrtoul.Po
++am__mv = mv -f
++COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
++ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
++AM_V_CC = $(am__v_CC_@AM_V@)
++am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
++am__v_CC_0 = @echo " CC " $@;
++am__v_CC_1 =
++CCLD = $(CC)
++LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
++AM_V_CCLD = $(am__v_CCLD_@AM_V@)
++am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
++am__v_CCLD_0 = @echo " CCLD " $@;
++am__v_CCLD_1 =
++SOURCES = $(libzmodem_a_SOURCES)
++DIST_SOURCES = $(libzmodem_a_SOURCES)
++am__can_run_installinfo = \
++ case $$AM_UPDATE_INFO_DIR in \
++ n|no|NO) false;; \
++ *) (install-info --version) >/dev/null 2>&1;; \
++ esac
++HEADERS = $(noinst_HEADERS)
++am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
++# Read a list of newline-separated strings from the standard input,
++# and print each of them once, without duplicates. Input order is
++# *not* preserved.
++am__uniquify_input = $(AWK) '\
++ BEGIN { nonempty = 0; } \
++ { items[$$0] = 1; nonempty = 1; } \
++ END { if (nonempty) { for (i in items) print i; }; } \
++'
++# Make sure the list of sources is unique. This is necessary because,
++# e.g., the same source file might be shared among _SOURCES variables
++# for different programs/libraries.
++am__define_uniq_tagged_files = \
++ list='$(am__tagged_files)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | $(am__uniquify_input)`
++ETAGS = etags
++CTAGS = ctags
++am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp \
++ $(top_srcdir)/mkinstalldirs alloca.c mkdir.c mktime.c stpcpy.c \
++ strdup.c strerror.c strftime.c strpbrk.c strstr.c strtol.c \
++ strtoul.c vasprintf.c
++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
++ACLOCAL = @ACLOCAL@
++ALLOCA = @ALLOCA@
++AMTAR = @AMTAR@
++AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
++AUTOCONF = @AUTOCONF@
++AUTOHEADER = @AUTOHEADER@
++AUTOMAKE = @AUTOMAKE@
++AWK = @AWK@
+ CC = @CC@
++CCDEPMODE = @CCDEPMODE@
++CFLAGS = @CFLAGS@
+ CPP = @CPP@
+-DATADIRNAME = @DATADIRNAME@
++CPPFLAGS = @CPPFLAGS@
++CYGPATH_W = @CYGPATH_W@
++DEFS = @DEFS@
++DEPDIR = @DEPDIR@
++ECHO_C = @ECHO_C@
++ECHO_N = @ECHO_N@
++ECHO_T = @ECHO_T@
++EGREP = @EGREP@
+ ENABLE_TIMESYNC = @ENABLE_TIMESYNC@
+-GENCAT = @GENCAT@
+-GMOFILES = @GMOFILES@
++EXEEXT = @EXEEXT@
++GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+ GMSGFMT = @GMSGFMT@
+-GT_NO = @GT_NO@
+-GT_YES = @GT_YES@
+-INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
+-INSTOBJEXT = @INSTOBJEXT@
+-INTLDEPS = @INTLDEPS@
++GMSGFMT_015 = @GMSGFMT_015@
++GREP = @GREP@
++INSTALL = @INSTALL@
++INSTALL_DATA = @INSTALL_DATA@
++INSTALL_PROGRAM = @INSTALL_PROGRAM@
++INSTALL_SCRIPT = @INSTALL_SCRIPT@
++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+ INTLLIBS = @INTLLIBS@
+-INTLOBJS = @INTLOBJS@
++INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+ LDFLAGS = @LDFLAGS@
++LIBICONV = @LIBICONV@
++LIBINTL = @LIBINTL@
+ LIBOBJS = @LIBOBJS@
+ LIBS = @LIBS@
++LTLIBICONV = @LTLIBICONV@
++LTLIBINTL = @LTLIBINTL@
++LTLIBOBJS = @LTLIBOBJS@
+ MAKEINFO = @MAKEINFO@
+-MKINSTALLDIRS = @MKINSTALLDIRS@
++MKDIR_P = @MKDIR_P@
+ MSGFMT = @MSGFMT@
++MSGMERGE = @MSGMERGE@
++MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
++OBJEXT = @OBJEXT@
+ PACKAGE = @PACKAGE@
++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
++PACKAGE_NAME = @PACKAGE_NAME@
++PACKAGE_STRING = @PACKAGE_STRING@
++PACKAGE_TARNAME = @PACKAGE_TARNAME@
++PACKAGE_URL = @PACKAGE_URL@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
+-POFILES = @POFILES@
++PATH_SEPARATOR = @PATH_SEPARATOR@
+ POSUB = @POSUB@
+ RANLIB = @RANLIB@
+-U = @U@
+-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
++SED = @SED@
++SET_MAKE = @SET_MAKE@
++SHELL = @SHELL@
++STRIP = @STRIP@
+ USE_NLS = @USE_NLS@
+ VERSION = @VERSION@
+-l = @l@
+-
+-noinst_LIBRARIES=libzmodem.a
+-CFLAGS=@CFLAGS@
+-AUTOMAKE_OPTIONS=ansi2knr
+-
++XGETTEXT = @XGETTEXT@
++XGETTEXT_015 = @XGETTEXT_015@
++XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
++abs_builddir = @abs_builddir@
++abs_srcdir = @abs_srcdir@
++abs_top_builddir = @abs_top_builddir@
++abs_top_srcdir = @abs_top_srcdir@
++ac_ct_CC = @ac_ct_CC@
++am__include = @am__include@
++am__leading_dot = @am__leading_dot@
++am__quote = @am__quote@
++am__tar = @am__tar@
++am__untar = @am__untar@
++bindir = @bindir@
++build = @build@
++build_alias = @build_alias@
++build_cpu = @build_cpu@
++build_os = @build_os@
++build_vendor = @build_vendor@
++builddir = @builddir@
++datadir = @datadir@
++datarootdir = @datarootdir@
++docdir = @docdir@
++dvidir = @dvidir@
++exec_prefix = @exec_prefix@
++host = @host@
++host_alias = @host_alias@
++host_cpu = @host_cpu@
++host_os = @host_os@
++host_vendor = @host_vendor@
++htmldir = @htmldir@
++includedir = @includedir@
++infodir = @infodir@
++install_sh = @install_sh@
++libdir = @libdir@
++libexecdir = @libexecdir@
++localedir = @localedir@
++localstatedir = @localstatedir@
++mandir = @mandir@
++mkdir_p = @mkdir_p@
++oldincludedir = @oldincludedir@
++pdfdir = @pdfdir@
++prefix = @prefix@
++program_transform_name = @program_transform_name@
++psdir = @psdir@
++sbindir = @sbindir@
++sharedstatedir = @sharedstatedir@
++srcdir = @srcdir@
++sysconfdir = @sysconfdir@
++target_alias = @target_alias@
++top_build_prefix = @top_build_prefix@
++top_builddir = @top_builddir@
++top_srcdir = @top_srcdir@
++noinst_LIBRARIES = libzmodem.a
+ EXTRA_DIST = alloca.c ansi2knr.1 ansi2knr.c \
+ getopt.c getopt1.c mkdir.c mktime.c \
+ strdup.c strerror.c strstr.c strpbrk.c strtol.c strtoul.c stpcpy.c \
+ strftime.c vasprintf.c
+
+ libzmodem_a_SOURCES = long-options.c xstrtol.c xstrtoul.c error.c
+-libzmodem_a_LIBADD = @LIBOBJS@ @ALLOCA@
+-libzmodem_a_DEPENDENCIES = @ALLOCA@ @LIBOBJS@
+-
++libzmodem_a_LIBADD = @LIBOBJS@ @ALLOCA@
++libzmodem_a_DEPENDENCIES = @ALLOCA@ @LIBOBJS@
+ noinst_HEADERS = getopt.h long-options.h xstrtol.h xstrtoul.h error.h
+-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+-CONFIG_HEADER = ../config.h
+-CONFIG_CLEAN_FILES =
+-LIBRARIES = $(noinst_LIBRARIES)
++all: all-am
+
++.SUFFIXES:
++.SUFFIXES: .c .o .obj
++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
++ @for dep in $?; do \
++ case '$(am__configure_deps)' in \
++ *$$dep*) \
++ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
++ && { if test -f $@; then exit 0; else break; fi; }; \
++ exit 1;; \
++ esac; \
++ done; \
++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \
++ $(am__cd) $(top_srcdir) && \
++ $(AUTOMAKE) --gnu lib/Makefile
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++ @case '$?' in \
++ *config.status*) \
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
++ *) \
++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
++ esac;
++
++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
++
++$(top_srcdir)/configure: $(am__configure_deps)
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
++$(ACLOCAL_M4): $(am__aclocal_m4_deps)
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
++$(am__aclocal_m4_deps):
+
+-DEFS = @DEFS@ -I. -I$(srcdir) -I..
+-CPPFLAGS = @CPPFLAGS@
+-ANSI2KNR = @ANSI2KNR@
+-libzmodem_a_OBJECTS = long-options$U.o xstrtol$U.o xstrtoul$U.o \
+-error$U.o
+-AR = ar
+-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+-LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+-HEADERS = $(noinst_HEADERS)
++clean-noinstLIBRARIES:
++ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+
+-DIST_COMMON = Makefile.am Makefile.in alloca.c ansi2knr.1 ansi2knr.c \
+-getopt.c getopt1.c mkdir.c mktime.c stpcpy.c strdup.c strerror.c \
+-strftime.c strpbrk.c strstr.c strtol.c strtoul.c vasprintf.c
++libzmodem.a: $(libzmodem_a_OBJECTS) $(libzmodem_a_DEPENDENCIES) $(EXTRA_libzmodem_a_DEPENDENCIES)
++ $(AM_V_at)-rm -f libzmodem.a
++ $(AM_V_AR)$(libzmodem_a_AR) libzmodem.a $(libzmodem_a_OBJECTS) $(libzmodem_a_LIBADD)
++ $(AM_V_at)$(RANLIB) libzmodem.a
+
++mostlyclean-compile:
++ -rm -f *.$(OBJEXT)
+
+-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
++distclean-compile:
++ -rm -f *.tab.c
+
+-TAR = tar
+-GZIP = --best
+-SOURCES = $(libzmodem_a_SOURCES)
+-OBJECTS = $(libzmodem_a_OBJECTS)
++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/mkdir.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/mktime.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/stpcpy.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strdup.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strerror.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strftime.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strpbrk.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strstr.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strtol.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strtoul.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/vasprintf.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloca.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/error.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/long-options.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xstrtol.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xstrtoul.Po@am__quote@ # am--include-marker
++
++$(am__depfiles_remade):
++ @$(MKDIR_P) $(@D)
++ @echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+-all: Makefile $(ANSI2KNR) $(LIBRARIES) $(HEADERS)
++am--depfiles: $(am__depfiles_remade)
+
+-.SUFFIXES:
+-.SUFFIXES: .S .c .o .s
+-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps lib/Makefile
++.c.o:
++@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
++@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
++
++.c.obj:
++@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
++@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
++
++ID: $(am__tagged_files)
++ $(am__define_uniq_tagged_files); mkid -fID $$unique
++tags: tags-am
++TAGS: tags
++
++tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
++ set x; \
++ here=`pwd`; \
++ $(am__define_uniq_tagged_files); \
++ shift; \
++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
++ test -n "$$unique" || unique=$$empty_fix; \
++ if test $$# -gt 0; then \
++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++ "$$@" $$unique; \
++ else \
++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++ $$unique; \
++ fi; \
++ fi
++ctags: ctags-am
++
++CTAGS: ctags
++ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
++ $(am__define_uniq_tagged_files); \
++ test -z "$(CTAGS_ARGS)$$unique" \
++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
++ $$unique
++
++GTAGS:
++ here=`$(am__cd) $(top_builddir) && pwd` \
++ && $(am__cd) $(top_srcdir) \
++ && gtags -i $(GTAGS_ARGS) "$$here"
++cscopelist: cscopelist-am
++
++cscopelist-am: $(am__tagged_files)
++ list='$(am__tagged_files)'; \
++ case "$(srcdir)" in \
++ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
++ *) sdir=$(subdir)/$(srcdir) ;; \
++ esac; \
++ for i in $$list; do \
++ if test -f "$$i"; then \
++ echo "$(subdir)/$$i"; \
++ else \
++ echo "$$sdir/$$i"; \
++ fi; \
++ done >> $(top_builddir)/cscope.files
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+- cd $(top_builddir) \
+- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
++distclean-tags:
++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
++distdir: $(BUILT_SOURCES)
++ $(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+-mostlyclean-noinstLIBRARIES:
++distdir-am: $(DISTFILES)
++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ list='$(DISTFILES)'; \
++ dist_files=`for file in $$list; do echo $$file; done | \
++ sed -e "s|^$$srcdirstrip/||;t" \
++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
++ case $$dist_files in \
++ */*) $(MKDIR_P) `echo "$$dist_files" | \
++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
++ sort -u` ;; \
++ esac; \
++ for file in $$dist_files; do \
++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
++ if test -d $$d/$$file; then \
++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
++ if test -d "$(distdir)/$$file"; then \
++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++ fi; \
++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++ fi; \
++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
++ else \
++ test -f "$(distdir)/$$file" \
++ || cp -p $$d/$$file "$(distdir)/$$file" \
++ || exit 1; \
++ fi; \
++ done
++check-am: all-am
++check: check-am
++all-am: Makefile $(LIBRARIES) $(HEADERS)
++installdirs:
++install: install-am
++install-exec: install-exec-am
++install-data: install-data-am
++uninstall: uninstall-am
+
+-clean-noinstLIBRARIES:
+- -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
++install-am: all-am
++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
++
++installcheck: installcheck-am
++install-strip:
++ if test -z '$(STRIP)'; then \
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ install; \
++ else \
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
++ fi
++mostlyclean-generic:
+
+-distclean-noinstLIBRARIES:
++clean-generic:
+
+-maintainer-clean-noinstLIBRARIES:
++distclean-generic:
++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+-.c.o:
+- $(COMPILE) -c $<
++maintainer-clean-generic:
++ @echo "This command is intended for maintainers to use"
++ @echo "it deletes files that may require special tools to rebuild."
++clean: clean-am
+
+-.s.o:
+- $(COMPILE) -c $<
++clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
+
+-.S.o:
+- $(COMPILE) -c $<
++distclean: distclean-am
++ -rm -f $(DEPDIR)/mkdir.Po
++ -rm -f $(DEPDIR)/mktime.Po
++ -rm -f $(DEPDIR)/stpcpy.Po
++ -rm -f $(DEPDIR)/strdup.Po
++ -rm -f $(DEPDIR)/strerror.Po
++ -rm -f $(DEPDIR)/strftime.Po
++ -rm -f $(DEPDIR)/strpbrk.Po
++ -rm -f $(DEPDIR)/strstr.Po
++ -rm -f $(DEPDIR)/strtol.Po
++ -rm -f $(DEPDIR)/strtoul.Po
++ -rm -f $(DEPDIR)/vasprintf.Po
++ -rm -f ./$(DEPDIR)/alloca.Po
++ -rm -f ./$(DEPDIR)/error.Po
++ -rm -f ./$(DEPDIR)/long-options.Po
++ -rm -f ./$(DEPDIR)/xstrtol.Po
++ -rm -f ./$(DEPDIR)/xstrtoul.Po
++ -rm -f Makefile
++distclean-am: clean-am distclean-compile distclean-generic \
++ distclean-tags
+
+-mostlyclean-compile:
+- -rm -f *.o core *.core
++dvi: dvi-am
+
+-clean-compile:
++dvi-am:
+
+-distclean-compile:
+- -rm -f *.tab.c
++html: html-am
+
+-maintainer-clean-compile:
++html-am:
+
+-mostlyclean-krextra:
++info: info-am
+
+-clean-krextra:
+- -rm -f ansi2knr
++info-am:
+
+-distclean-krextra:
++install-data-am:
+
+-maintainer-clean-krextra:
+-ansi2knr: ansi2knr.o
+- $(LINK) ansi2knr.o $(LIBS)
+-ansi2knr.o: $(CONFIG_HEADER)
+-
+-
+-mostlyclean-kr:
+- -rm -f *_.c
+-
+-clean-kr:
+-
+-distclean-kr:
+-
+-maintainer-clean-kr:
+-
+-libzmodem.a: $(libzmodem_a_OBJECTS) $(libzmodem_a_DEPENDENCIES)
+- -rm -f libzmodem.a
+- $(AR) cru libzmodem.a $(libzmodem_a_OBJECTS) $(libzmodem_a_LIBADD)
+- $(RANLIB) libzmodem.a
+-alloca_.c: alloca.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/alloca.c; then echo $(srcdir)/alloca.c; else echo alloca.c; fi` | $(ANSI2KNR) alloca_.c
+-error_.c: error.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/error.c; then echo $(srcdir)/error.c; else echo error.c; fi` | $(ANSI2KNR) error_.c
+-getopt_.c: getopt.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/getopt.c; then echo $(srcdir)/getopt.c; else echo getopt.c; fi` | $(ANSI2KNR) getopt_.c
+-getopt1_.c: getopt1.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/getopt1.c; then echo $(srcdir)/getopt1.c; else echo getopt1.c; fi` | $(ANSI2KNR) getopt1_.c
+-long-options_.c: long-options.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/long-options.c; then echo $(srcdir)/long-options.c; else echo long-options.c; fi` | $(ANSI2KNR) long-options_.c
+-mkdir_.c: mkdir.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/mkdir.c; then echo $(srcdir)/mkdir.c; else echo mkdir.c; fi` | $(ANSI2KNR) mkdir_.c
+-mktime_.c: mktime.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/mktime.c; then echo $(srcdir)/mktime.c; else echo mktime.c; fi` | $(ANSI2KNR) mktime_.c
+-stpcpy_.c: stpcpy.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/stpcpy.c; then echo $(srcdir)/stpcpy.c; else echo stpcpy.c; fi` | $(ANSI2KNR) stpcpy_.c
+-strdup_.c: strdup.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/strdup.c; then echo $(srcdir)/strdup.c; else echo strdup.c; fi` | $(ANSI2KNR) strdup_.c
+-strerror_.c: strerror.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/strerror.c; then echo $(srcdir)/strerror.c; else echo strerror.c; fi` | $(ANSI2KNR) strerror_.c
+-strftime_.c: strftime.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/strftime.c; then echo $(srcdir)/strftime.c; else echo strftime.c; fi` | $(ANSI2KNR) strftime_.c
+-strpbrk_.c: strpbrk.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/strpbrk.c; then echo $(srcdir)/strpbrk.c; else echo strpbrk.c; fi` | $(ANSI2KNR) strpbrk_.c
+-strstr_.c: strstr.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/strstr.c; then echo $(srcdir)/strstr.c; else echo strstr.c; fi` | $(ANSI2KNR) strstr_.c
+-strtol_.c: strtol.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/strtol.c; then echo $(srcdir)/strtol.c; else echo strtol.c; fi` | $(ANSI2KNR) strtol_.c
+-strtoul_.c: strtoul.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/strtoul.c; then echo $(srcdir)/strtoul.c; else echo strtoul.c; fi` | $(ANSI2KNR) strtoul_.c
+-vasprintf_.c: vasprintf.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/vasprintf.c; then echo $(srcdir)/vasprintf.c; else echo vasprintf.c; fi` | $(ANSI2KNR) vasprintf_.c
+-xstrtol_.c: xstrtol.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/xstrtol.c; then echo $(srcdir)/xstrtol.c; else echo xstrtol.c; fi` | $(ANSI2KNR) xstrtol_.c
+-xstrtoul_.c: xstrtoul.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/xstrtoul.c; then echo $(srcdir)/xstrtoul.c; else echo xstrtoul.c; fi` | $(ANSI2KNR) xstrtoul_.c
+-alloca_.o error_.o getopt_.o getopt1_.o long-options_.o mkdir_.o \
+-mktime_.o stpcpy_.o strdup_.o strerror_.o strftime_.o strpbrk_.o \
+-strstr_.o strtol_.o strtoul_.o vasprintf_.o xstrtol_.o xstrtoul_.o : \
+-$(ANSI2KNR)
+-
+-tags: TAGS
+-
+-ID: $(HEADERS) $(SOURCES) $(LISP)
+- here=`pwd` && cd $(srcdir) \
+- && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP)
++install-dvi: install-dvi-am
+
+-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+- tags=; \
+- here=`pwd`; \
+- list='$(SOURCES) $(HEADERS)'; \
+- unique=`for i in $$list; do echo $$i; done | \
+- awk ' { files[$$0] = 1; } \
+- END { for (i in files) print i; }'`; \
+- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++install-dvi-am:
+
+-mostlyclean-tags:
++install-exec-am:
+
+-clean-tags:
++install-html: install-html-am
+
+-distclean-tags:
+- -rm -f TAGS ID
++install-html-am:
+
+-maintainer-clean-tags:
++install-info: install-info-am
+
+-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
++install-info-am:
+
+-subdir = lib
++install-man:
+
+-distdir: $(DISTFILES)
+- @for file in $(DISTFILES); do \
+- d=$(srcdir); \
+- test -f $(distdir)/$$file \
+- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+- || cp -p $$d/$$file $(distdir)/$$file; \
+- done
+-error.o: error.c ../config.h
+-long-options.o: long-options.c ../config.h getopt.h long-options.h
+-xstrtol.o: xstrtol.c ../config.h xstrtol.h
+-xstrtoul.o: xstrtoul.c xstrtol.c ../config.h xstrtol.h
+-
+-info:
+-dvi:
+-check: all
+- $(MAKE)
+-installcheck:
+-install-exec:
+- @$(NORMAL_INSTALL)
++install-pdf: install-pdf-am
+
+-install-data:
+- @$(NORMAL_INSTALL)
++install-pdf-am:
+
+-install: install-exec install-data all
+- @:
++install-ps: install-ps-am
+
+-uninstall:
++install-ps-am:
+
+-install-strip:
+- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+-installdirs:
++installcheck-am:
+
++maintainer-clean: maintainer-clean-am
++ -rm -f $(DEPDIR)/mkdir.Po
++ -rm -f $(DEPDIR)/mktime.Po
++ -rm -f $(DEPDIR)/stpcpy.Po
++ -rm -f $(DEPDIR)/strdup.Po
++ -rm -f $(DEPDIR)/strerror.Po
++ -rm -f $(DEPDIR)/strftime.Po
++ -rm -f $(DEPDIR)/strpbrk.Po
++ -rm -f $(DEPDIR)/strstr.Po
++ -rm -f $(DEPDIR)/strtol.Po
++ -rm -f $(DEPDIR)/strtoul.Po
++ -rm -f $(DEPDIR)/vasprintf.Po
++ -rm -f ./$(DEPDIR)/alloca.Po
++ -rm -f ./$(DEPDIR)/error.Po
++ -rm -f ./$(DEPDIR)/long-options.Po
++ -rm -f ./$(DEPDIR)/xstrtol.Po
++ -rm -f ./$(DEPDIR)/xstrtoul.Po
++ -rm -f Makefile
++maintainer-clean-am: distclean-am maintainer-clean-generic
+
+-mostlyclean-generic:
+- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
++mostlyclean: mostlyclean-am
+
+-clean-generic:
+- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
++mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+-distclean-generic:
+- -rm -f Makefile $(DISTCLEANFILES)
+- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
++pdf: pdf-am
+
+-maintainer-clean-generic:
+- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+-mostlyclean: mostlyclean-noinstLIBRARIES mostlyclean-compile \
+- mostlyclean-krextra mostlyclean-kr mostlyclean-tags \
+- mostlyclean-generic
+-
+-clean: clean-noinstLIBRARIES clean-compile clean-krextra clean-kr \
+- clean-tags clean-generic mostlyclean
+-
+-distclean: distclean-noinstLIBRARIES distclean-compile \
+- distclean-krextra distclean-kr distclean-tags \
+- distclean-generic clean
+- -rm -f config.status
+-
+-maintainer-clean: maintainer-clean-noinstLIBRARIES \
+- maintainer-clean-compile maintainer-clean-krextra \
+- maintainer-clean-kr maintainer-clean-tags \
+- maintainer-clean-generic distclean
+- @echo "This command is intended for maintainers to use;"
+- @echo "it deletes files that may require special tools to rebuild."
++pdf-am:
++
++ps: ps-am
++
++ps-am:
++
++uninstall-am:
++
++.MAKE: install-am install-strip
++
++.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
++ clean-generic clean-noinstLIBRARIES cscopelist-am ctags \
++ ctags-am distclean distclean-compile distclean-generic \
++ distclean-tags distdir dvi dvi-am html html-am info info-am \
++ install install-am install-data install-data-am install-dvi \
++ install-dvi-am install-exec install-exec-am install-html \
++ install-html-am install-info install-info-am install-man \
++ install-pdf install-pdf-am install-ps install-ps-am \
++ install-strip installcheck installcheck-am installdirs \
++ maintainer-clean maintainer-clean-generic mostlyclean \
++ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
++ tags tags-am uninstall uninstall-am
+
+-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
+-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
+-mostlyclean-compile distclean-compile clean-compile \
+-maintainer-clean-compile mostlyclean-krextra distclean-krextra \
+-clean-krextra maintainer-clean-krextra mostlyclean-kr distclean-kr \
+-clean-kr maintainer-clean-kr tags mostlyclean-tags distclean-tags \
+-clean-tags maintainer-clean-tags distdir info dvi installcheck \
+-install-exec install-data install uninstall all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++.PRECIOUS: Makefile
+
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+diff -uprN clean/lrzsz-0.12.20/m4/ChangeLog lrzsz-0.12.20/m4/ChangeLog
+--- clean/lrzsz-0.12.20/m4/ChangeLog 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/m4/ChangeLog 2019-11-25 18:21:04.000000000 +0000
+@@ -0,0 +1,24 @@
++2019-11-25 gettextize <bug-gnu-gettext@gnu.org>
++
++ * gettext.m4: Upgrade to gettext-0.20.1.
++ * host-cpu-c-abi.m4: New file, from gettext-0.20.1.
++ * iconv.m4: Upgrade to gettext-0.20.1.
++ * intlmacosx.m4: New file, from gettext-0.20.1.
++ * lib-ld.m4: Upgrade to gettext-0.20.1.
++ * lib-link.m4: Upgrade to gettext-0.20.1.
++ * lib-prefix.m4: Upgrade to gettext-0.20.1.
++ * nls.m4: Upgrade to gettext-0.20.1.
++ * po.m4: Upgrade to gettext-0.20.1.
++ * progtest.m4: Upgrade to gettext-0.20.1.
++
++2019-11-25 gettextize <bug-gnu-gettext@gnu.org>
++
++ * gettext.m4: New file, from gettext-0.19.8.1.
++ * iconv.m4: New file, from gettext-0.19.8.1.
++ * lib-ld.m4: New file, from gettext-0.19.8.1.
++ * lib-link.m4: New file, from gettext-0.19.8.1.
++ * lib-prefix.m4: New file, from gettext-0.19.8.1.
++ * nls.m4: New file, from gettext-0.19.8.1.
++ * po.m4: New file, from gettext-0.19.8.1.
++ * progtest.m4: New file, from gettext-0.19.8.1.
++
+diff -uprN clean/lrzsz-0.12.20/m4/gettext.m4 lrzsz-0.12.20/m4/gettext.m4
+--- clean/lrzsz-0.12.20/m4/gettext.m4 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/m4/gettext.m4 2019-11-25 18:21:18.000000000 +0000
+@@ -0,0 +1,386 @@
++# gettext.m4 serial 70 (gettext-0.20)
++dnl Copyright (C) 1995-2014, 2016, 2018 Free Software Foundation, Inc.
++dnl This file is free software; the Free Software Foundation
++dnl gives unlimited permission to copy and/or distribute it,
++dnl with or without modifications, as long as this notice is preserved.
++dnl
++dnl This file can be used in projects which are not available under
++dnl the GNU General Public License or the GNU Library General Public
++dnl License but which still want to provide support for the GNU gettext
++dnl functionality.
++dnl Please note that the actual code of the GNU gettext library is covered
++dnl by the GNU Library General Public License, and the rest of the GNU
++dnl gettext package is covered by the GNU General Public License.
++dnl They are *not* in the public domain.
++
++dnl Authors:
++dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
++dnl Bruno Haible <haible@clisp.cons.org>, 2000-2006, 2008-2010.
++
++dnl Macro to add for using GNU gettext.
++
++dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
++dnl INTLSYMBOL must be one of 'external', 'use-libtool'.
++dnl INTLSYMBOL should be 'external' for packages other than GNU gettext, and
++dnl 'use-libtool' for the packages 'gettext-runtime' and 'gettext-tools'.
++dnl If INTLSYMBOL is 'use-libtool', then a libtool library
++dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
++dnl depending on --{enable,disable}-{shared,static} and on the presence of
++dnl AM-DISABLE-SHARED).
++dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
++dnl implementations (in libc or libintl) without the ngettext() function
++dnl will be ignored. If NEEDSYMBOL is specified and is
++dnl 'need-formatstring-macros', then GNU gettext implementations that don't
++dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
++dnl INTLDIR is used to find the intl libraries. If empty,
++dnl the value '$(top_builddir)/intl/' is used.
++dnl
++dnl The result of the configuration is one of three cases:
++dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
++dnl and used.
++dnl Catalog format: GNU --> install in $(datadir)
++dnl Catalog extension: .mo after installation, .gmo in source tree
++dnl 2) GNU gettext has been found in the system's C library.
++dnl Catalog format: GNU --> install in $(datadir)
++dnl Catalog extension: .mo after installation, .gmo in source tree
++dnl 3) No internationalization, always use English msgid.
++dnl Catalog format: none
++dnl Catalog extension: none
++dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
++dnl The use of .gmo is historical (it was needed to avoid overwriting the
++dnl GNU format catalogs when building on a platform with an X/Open gettext),
++dnl but we keep it in order not to force irrelevant filename changes on the
++dnl maintainers.
++dnl
++AC_DEFUN([AM_GNU_GETTEXT],
++[
++ dnl Argument checking.
++ ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [use-libtool], ,
++ [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
++])])])])
++ ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old],
++ [errprint([ERROR: Use of AM_GNU_GETTEXT without [external] argument is no longer supported.
++])])
++ ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
++ [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
++])])])])
++ define([gt_included_intl],
++ ifelse([$1], [external], [no], [yes]))
++ gt_NEEDS_INIT
++ AM_GNU_GETTEXT_NEED([$2])
++
++ AC_REQUIRE([AM_PO_SUBDIRS])dnl
++ ifelse(gt_included_intl, yes, [
++ AC_REQUIRE([AM_INTL_SUBDIR])dnl
++ ])
++
++ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
++ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
++ AC_REQUIRE([AC_LIB_RPATH])
++
++ dnl Sometimes libintl requires libiconv, so first search for libiconv.
++ dnl Ideally we would do this search only after the
++ dnl if test "$USE_NLS" = "yes"; then
++ dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
++ dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
++ dnl the configure script would need to contain the same shell code
++ dnl again, outside any 'if'. There are two solutions:
++ dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
++ dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
++ dnl Since AC_PROVIDE_IFELSE is not documented, we avoid it.
++ ifelse(gt_included_intl, yes, , [
++ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
++ ])
++
++ dnl Sometimes, on Mac OS X, libintl requires linking with CoreFoundation.
++ gt_INTL_MACOSX
++
++ dnl Set USE_NLS.
++ AC_REQUIRE([AM_NLS])
++
++ ifelse(gt_included_intl, yes, [
++ BUILD_INCLUDED_LIBINTL=no
++ USE_INCLUDED_LIBINTL=no
++ ])
++ LIBINTL=
++ LTLIBINTL=
++ POSUB=
++
++ dnl Add a version number to the cache macros.
++ case " $gt_needs " in
++ *" need-formatstring-macros "*) gt_api_version=3 ;;
++ *" need-ngettext "*) gt_api_version=2 ;;
++ *) gt_api_version=1 ;;
++ esac
++ gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
++ gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
++
++ dnl If we use NLS figure out what method
++ if test "$USE_NLS" = "yes"; then
++ gt_use_preinstalled_gnugettext=no
++ ifelse(gt_included_intl, yes, [
++ AC_MSG_CHECKING([whether included gettext is requested])
++ AC_ARG_WITH([included-gettext],
++ [ --with-included-gettext use the GNU gettext library included here],
++ nls_cv_force_use_gnu_gettext=$withval,
++ nls_cv_force_use_gnu_gettext=no)
++ AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext])
++
++ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
++ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
++ ])
++ dnl User does not insist on using GNU NLS library. Figure out what
++ dnl to use. If GNU gettext is available we use this. Else we have
++ dnl to fall back to GNU NLS library.
++
++ if test $gt_api_version -ge 3; then
++ gt_revision_test_code='
++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
++#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
++#endif
++changequote(,)dnl
++typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
++changequote([,])dnl
++'
++ else
++ gt_revision_test_code=
++ fi
++ if test $gt_api_version -ge 2; then
++ gt_expression_test_code=' + * ngettext ("", "", 0)'
++ else
++ gt_expression_test_code=
++ fi
++
++ AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc],
++ [AC_LINK_IFELSE(
++ [AC_LANG_PROGRAM(
++ [[
++#include <libintl.h>
++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
++extern int _nl_msg_cat_cntr;
++extern int *_nl_domain_bindings;
++#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings)
++#else
++#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
++#endif
++$gt_revision_test_code
++ ]],
++ [[
++bindtextdomain ("", "");
++return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
++ ]])],
++ [eval "$gt_func_gnugettext_libc=yes"],
++ [eval "$gt_func_gnugettext_libc=no"])])
++
++ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
++ dnl Sometimes libintl requires libiconv, so first search for libiconv.
++ ifelse(gt_included_intl, yes, , [
++ AM_ICONV_LINK
++ ])
++ dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
++ dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
++ dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
++ dnl even if libiconv doesn't exist.
++ AC_LIB_LINKFLAGS_BODY([intl])
++ AC_CACHE_CHECK([for GNU gettext in libintl],
++ [$gt_func_gnugettext_libintl],
++ [gt_save_CPPFLAGS="$CPPFLAGS"
++ CPPFLAGS="$CPPFLAGS $INCINTL"
++ gt_save_LIBS="$LIBS"
++ LIBS="$LIBS $LIBINTL"
++ dnl Now see whether libintl exists and does not depend on libiconv.
++ AC_LINK_IFELSE(
++ [AC_LANG_PROGRAM(
++ [[
++#include <libintl.h>
++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
++extern int _nl_msg_cat_cntr;
++extern
++#ifdef __cplusplus
++"C"
++#endif
++const char *_nl_expand_alias (const char *);
++#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias (""))
++#else
++#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
++#endif
++$gt_revision_test_code
++ ]],
++ [[
++bindtextdomain ("", "");
++return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
++ ]])],
++ [eval "$gt_func_gnugettext_libintl=yes"],
++ [eval "$gt_func_gnugettext_libintl=no"])
++ dnl Now see whether libintl exists and depends on libiconv.
++ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
++ LIBS="$LIBS $LIBICONV"
++ AC_LINK_IFELSE(
++ [AC_LANG_PROGRAM(
++ [[
++#include <libintl.h>
++#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
++extern int _nl_msg_cat_cntr;
++extern
++#ifdef __cplusplus
++"C"
++#endif
++const char *_nl_expand_alias (const char *);
++#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias (""))
++#else
++#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
++#endif
++$gt_revision_test_code
++ ]],
++ [[
++bindtextdomain ("", "");
++return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
++ ]])],
++ [LIBINTL="$LIBINTL $LIBICONV"
++ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
++ eval "$gt_func_gnugettext_libintl=yes"
++ ])
++ fi
++ CPPFLAGS="$gt_save_CPPFLAGS"
++ LIBS="$gt_save_LIBS"])
++ fi
++
++ dnl If an already present or preinstalled GNU gettext() is found,
++ dnl use it. But if this macro is used in GNU gettext, and GNU
++ dnl gettext is already preinstalled in libintl, we update this
++ dnl libintl. (Cf. the install rule in intl/Makefile.in.)
++ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
++ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
++ && test "$PACKAGE" != gettext-runtime \
++ && test "$PACKAGE" != gettext-tools; }; then
++ gt_use_preinstalled_gnugettext=yes
++ else
++ dnl Reset the values set by searching for libintl.
++ LIBINTL=
++ LTLIBINTL=
++ INCINTL=
++ fi
++
++ ifelse(gt_included_intl, yes, [
++ if test "$gt_use_preinstalled_gnugettext" != "yes"; then
++ dnl GNU gettext is not found in the C library.
++ dnl Fall back on included GNU gettext library.
++ nls_cv_use_gnu_gettext=yes
++ fi
++ fi
++
++ if test "$nls_cv_use_gnu_gettext" = "yes"; then
++ dnl Mark actions used to generate GNU NLS library.
++ BUILD_INCLUDED_LIBINTL=yes
++ USE_INCLUDED_LIBINTL=yes
++ LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.la $LIBICONV $LIBTHREAD"
++ LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.la $LTLIBICONV $LTLIBTHREAD"
++ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
++ fi
++
++ CATOBJEXT=
++ if test "$gt_use_preinstalled_gnugettext" = "yes" \
++ || test "$nls_cv_use_gnu_gettext" = "yes"; then
++ dnl Mark actions to use GNU gettext tools.
++ CATOBJEXT=.gmo
++ fi
++ ])
++
++ if test -n "$INTL_MACOSX_LIBS"; then
++ if test "$gt_use_preinstalled_gnugettext" = "yes" \
++ || test "$nls_cv_use_gnu_gettext" = "yes"; then
++ dnl Some extra flags are needed during linking.
++ LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
++ LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
++ fi
++ fi
++
++ if test "$gt_use_preinstalled_gnugettext" = "yes" \
++ || test "$nls_cv_use_gnu_gettext" = "yes"; then
++ AC_DEFINE([ENABLE_NLS], [1],
++ [Define to 1 if translation of program messages to the user's native language
++ is requested.])
++ else
++ USE_NLS=no
++ fi
++ fi
++
++ AC_MSG_CHECKING([whether to use NLS])
++ AC_MSG_RESULT([$USE_NLS])
++ if test "$USE_NLS" = "yes"; then
++ AC_MSG_CHECKING([where the gettext function comes from])
++ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
++ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
++ gt_source="external libintl"
++ else
++ gt_source="libc"
++ fi
++ else
++ gt_source="included intl directory"
++ fi
++ AC_MSG_RESULT([$gt_source])
++ fi
++
++ if test "$USE_NLS" = "yes"; then
++
++ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
++ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
++ AC_MSG_CHECKING([how to link with libintl])
++ AC_MSG_RESULT([$LIBINTL])
++ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
++ fi
++
++ dnl For backward compatibility. Some packages may be using this.
++ AC_DEFINE([HAVE_GETTEXT], [1],
++ [Define if the GNU gettext() function is already present or preinstalled.])
++ AC_DEFINE([HAVE_DCGETTEXT], [1],
++ [Define if the GNU dcgettext() function is already present or preinstalled.])
++ fi
++
++ dnl We need to process the po/ directory.
++ POSUB=po
++ fi
++
++ ifelse(gt_included_intl, yes, [
++ dnl In GNU gettext we have to set BUILD_INCLUDED_LIBINTL to 'yes'
++ dnl because some of the testsuite requires it.
++ BUILD_INCLUDED_LIBINTL=yes
++
++ dnl Make all variables we use known to autoconf.
++ AC_SUBST([BUILD_INCLUDED_LIBINTL])
++ AC_SUBST([USE_INCLUDED_LIBINTL])
++ AC_SUBST([CATOBJEXT])
++ ])
++
++ dnl For backward compatibility. Some Makefiles may be using this.
++ INTLLIBS="$LIBINTL"
++ AC_SUBST([INTLLIBS])
++
++ dnl Make all documented variables known to autoconf.
++ AC_SUBST([LIBINTL])
++ AC_SUBST([LTLIBINTL])
++ AC_SUBST([POSUB])
++])
++
++
++dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized.
++m4_define([gt_NEEDS_INIT],
++[
++ m4_divert_text([DEFAULTS], [gt_needs=])
++ m4_define([gt_NEEDS_INIT], [])
++])
++
++
++dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL])
++AC_DEFUN([AM_GNU_GETTEXT_NEED],
++[
++ m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"])
++])
++
++
++dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
++AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
++
++
++dnl Usage: AM_GNU_GETTEXT_REQUIRE_VERSION([gettext-version])
++AC_DEFUN([AM_GNU_GETTEXT_REQUIRE_VERSION], [])
+diff -uprN clean/lrzsz-0.12.20/m4/host-cpu-c-abi.m4 lrzsz-0.12.20/m4/host-cpu-c-abi.m4
+--- clean/lrzsz-0.12.20/m4/host-cpu-c-abi.m4 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/m4/host-cpu-c-abi.m4 2019-11-25 18:21:18.000000000 +0000
+@@ -0,0 +1,644 @@
++# host-cpu-c-abi.m4 serial 11
++dnl Copyright (C) 2002-2019 Free Software Foundation, Inc.
++dnl This file is free software; the Free Software Foundation
++dnl gives unlimited permission to copy and/or distribute it,
++dnl with or without modifications, as long as this notice is preserved.
++
++dnl From Bruno Haible and Sam Steingold.
++
++dnl Sets the HOST_CPU variable to the canonical name of the CPU.
++dnl Sets the HOST_CPU_C_ABI variable to the canonical name of the CPU with its
++dnl C language ABI (application binary interface).
++dnl Also defines __${HOST_CPU}__ and __${HOST_CPU_C_ABI}__ as C macros in
++dnl config.h.
++dnl
++dnl This canonical name can be used to select a particular assembly language
++dnl source file that will interoperate with C code on the given host.
++dnl
++dnl For example:
++dnl * 'i386' and 'sparc' are different canonical names, because code for i386
++dnl will not run on SPARC CPUs and vice versa. They have different
++dnl instruction sets.
++dnl * 'sparc' and 'sparc64' are different canonical names, because code for
++dnl 'sparc' and code for 'sparc64' cannot be linked together: 'sparc' code
++dnl contains 32-bit instructions, whereas 'sparc64' code contains 64-bit
++dnl instructions. A process on a SPARC CPU can be in 32-bit mode or in 64-bit
++dnl mode, but not both.
++dnl * 'mips' and 'mipsn32' are different canonical names, because they use
++dnl different argument passing and return conventions for C functions, and
++dnl although the instruction set of 'mips' is a large subset of the
++dnl instruction set of 'mipsn32'.
++dnl * 'mipsn32' and 'mips64' are different canonical names, because they use
++dnl different sizes for the C types like 'int' and 'void *', and although
++dnl the instruction sets of 'mipsn32' and 'mips64' are the same.
++dnl * The same canonical name is used for different endiannesses. You can
++dnl determine the endianness through preprocessor symbols:
++dnl - 'arm': test __ARMEL__.
++dnl - 'mips', 'mipsn32', 'mips64': test _MIPSEB vs. _MIPSEL.
++dnl - 'powerpc64': test _BIG_ENDIAN vs. _LITTLE_ENDIAN.
++dnl * The same name 'i386' is used for CPUs of type i386, i486, i586
++dnl (Pentium), AMD K7, Pentium II, Pentium IV, etc., because
++dnl - Instructions that do not exist on all of these CPUs (cmpxchg,
++dnl MMX, SSE, SSE2, 3DNow! etc.) are not frequently used. If your
++dnl assembly language source files use such instructions, you will
++dnl need to make the distinction.
++dnl - Speed of execution of the common instruction set is reasonable across
++dnl the entire family of CPUs. If you have assembly language source files
++dnl that are optimized for particular CPU types (like GNU gmp has), you
++dnl will need to make the distinction.
++dnl See <https://en.wikipedia.org/wiki/X86_instruction_listings>.
++AC_DEFUN([gl_HOST_CPU_C_ABI],
++[
++ AC_REQUIRE([AC_CANONICAL_HOST])
++ AC_REQUIRE([gl_C_ASM])
++ AC_CACHE_CHECK([host CPU and C ABI], [gl_cv_host_cpu_c_abi],
++ [case "$host_cpu" in
++
++changequote(,)dnl
++ i[4567]86 )
++changequote([,])dnl
++ gl_cv_host_cpu_c_abi=i386
++ ;;
++
++ x86_64 )
++ # On x86_64 systems, the C compiler may be generating code in one of
++ # these ABIs:
++ # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64.
++ # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64
++ # with native Windows (mingw, MSVC).
++ # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32.
++ # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if (defined __x86_64__ || defined __amd64__ \
++ || defined _M_X64 || defined _M_AMD64)
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __ILP32__ || defined _ILP32
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi=x86_64-x32],
++ [gl_cv_host_cpu_c_abi=x86_64])],
++ [gl_cv_host_cpu_c_abi=i386])
++ ;;
++
++changequote(,)dnl
++ alphaev[4-8] | alphaev56 | alphapca5[67] | alphaev6[78] )
++changequote([,])dnl
++ gl_cv_host_cpu_c_abi=alpha
++ ;;
++
++ arm* | aarch64 )
++ # Assume arm with EABI.
++ # On arm64 systems, the C compiler may be generating code in one of
++ # these ABIs:
++ # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64.
++ # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32.
++ # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#ifdef __aarch64__
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __ILP32__ || defined _ILP32
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi=arm64-ilp32],
++ [gl_cv_host_cpu_c_abi=arm64])],
++ [# Don't distinguish little-endian and big-endian arm, since they
++ # don't require different machine code for simple operations and
++ # since the user can distinguish them through the preprocessor
++ # defines __ARMEL__ vs. __ARMEB__.
++ # But distinguish arm which passes floating-point arguments and
++ # return values in integer registers (r0, r1, ...) - this is
++ # gcc -mfloat-abi=soft or gcc -mfloat-abi=softfp - from arm which
++ # passes them in float registers (s0, s1, ...) and double registers
++ # (d0, d1, ...) - this is gcc -mfloat-abi=hard. GCC 4.6 or newer
++ # sets the preprocessor defines __ARM_PCS (for the first case) and
++ # __ARM_PCS_VFP (for the second case), but older GCC does not.
++ echo 'double ddd; void func (double dd) { ddd = dd; }' > conftest.c
++ # Look for a reference to the register d0 in the .s file.
++ AC_TRY_COMMAND(${CC-cc} $CFLAGS $CPPFLAGS $gl_c_asm_opt conftest.c) >/dev/null 2>&1
++ if LC_ALL=C grep 'd0,' conftest.$gl_asmext >/dev/null; then
++ gl_cv_host_cpu_c_abi=armhf
++ else
++ gl_cv_host_cpu_c_abi=arm
++ fi
++ rm -f conftest*
++ ])
++ ;;
++
++ hppa1.0 | hppa1.1 | hppa2.0* | hppa64 )
++ # On hppa, the C compiler may be generating 32-bit code or 64-bit
++ # code. In the latter case, it defines _LP64 and __LP64__.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#ifdef __LP64__
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi=hppa64],
++ [gl_cv_host_cpu_c_abi=hppa])
++ ;;
++
++ ia64* )
++ # On ia64 on HP-UX, the C compiler may be generating 64-bit code or
++ # 32-bit code. In the latter case, it defines _ILP32.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#ifdef _ILP32
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi=ia64-ilp32],
++ [gl_cv_host_cpu_c_abi=ia64])
++ ;;
++
++ mips* )
++ # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this
++ # at 32.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64)
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi=mips64],
++ [# In the n32 ABI, _ABIN32 is defined, _ABIO32 is not defined (but
++ # may later get defined by <sgidefs.h>), and _MIPS_SIM == _ABIN32.
++ # In the 32 ABI, _ABIO32 is defined, _ABIN32 is not defined (but
++ # may later get defined by <sgidefs.h>), and _MIPS_SIM == _ABIO32.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if (_MIPS_SIM == _ABIN32)
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi=mipsn32],
++ [gl_cv_host_cpu_c_abi=mips])])
++ ;;
++
++ powerpc* )
++ # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD.
++ # No need to distinguish them here; the caller may distinguish
++ # them based on the OS.
++ # On powerpc64 systems, the C compiler may still be generating
++ # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may
++ # be generating 64-bit code.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __powerpc64__ || defined _ARCH_PPC64
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [# On powerpc64, there are two ABIs on Linux: The AIX compatible
++ # one and the ELFv2 one. The latter defines _CALL_ELF=2.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined _CALL_ELF && _CALL_ELF == 2
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi=powerpc64-elfv2],
++ [gl_cv_host_cpu_c_abi=powerpc64])
++ ],
++ [gl_cv_host_cpu_c_abi=powerpc])
++ ;;
++
++ rs6000 )
++ gl_cv_host_cpu_c_abi=powerpc
++ ;;
++
++ riscv32 | riscv64 )
++ # There are 2 architectures (with variants): rv32* and rv64*.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if __riscv_xlen == 64
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [cpu=riscv64],
++ [cpu=riscv32])
++ # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d.
++ # Size of 'long' and 'void *':
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __LP64__
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [main_abi=lp64],
++ [main_abi=ilp32])
++ # Float ABIs:
++ # __riscv_float_abi_double:
++ # 'float' and 'double' are passed in floating-point registers.
++ # __riscv_float_abi_single:
++ # 'float' are passed in floating-point registers.
++ # __riscv_float_abi_soft:
++ # No values are passed in floating-point registers.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __riscv_float_abi_double
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [float_abi=d],
++ [AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __riscv_float_abi_single
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [float_abi=f],
++ [float_abi=''])
++ ])
++ gl_cv_host_cpu_c_abi="${cpu}-${main_abi}${float_abi}"
++ ;;
++
++ s390* )
++ # On s390x, the C compiler may be generating 64-bit (= s390x) code
++ # or 31-bit (= s390) code.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __LP64__ || defined __s390x__
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi=s390x],
++ [gl_cv_host_cpu_c_abi=s390])
++ ;;
++
++ sparc | sparc64 )
++ # UltraSPARCs running Linux have `uname -m` = "sparc64", but the
++ # C compiler still generates 32-bit code.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __sparcv9 || defined __arch64__
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi=sparc64],
++ [gl_cv_host_cpu_c_abi=sparc])
++ ;;
++
++ *)
++ gl_cv_host_cpu_c_abi="$host_cpu"
++ ;;
++ esac
++ ])
++
++ dnl In most cases, $HOST_CPU and $HOST_CPU_C_ABI are the same.
++ HOST_CPU=`echo "$gl_cv_host_cpu_c_abi" | sed -e 's/-.*//'`
++ HOST_CPU_C_ABI="$gl_cv_host_cpu_c_abi"
++ AC_SUBST([HOST_CPU])
++ AC_SUBST([HOST_CPU_C_ABI])
++
++ # This was
++ # AC_DEFINE_UNQUOTED([__${HOST_CPU}__])
++ # AC_DEFINE_UNQUOTED([__${HOST_CPU_C_ABI}__])
++ # earlier, but KAI C++ 3.2d doesn't like this.
++ sed -e 's/-/_/g' >> confdefs.h <<EOF
++#ifndef __${HOST_CPU}__
++#define __${HOST_CPU}__ 1
++#endif
++#ifndef __${HOST_CPU_C_ABI}__
++#define __${HOST_CPU_C_ABI}__ 1
++#endif
++EOF
++ AH_TOP([/* CPU and C ABI indicator */
++#ifndef __i386__
++#undef __i386__
++#endif
++#ifndef __x86_64_x32__
++#undef __x86_64_x32__
++#endif
++#ifndef __x86_64__
++#undef __x86_64__
++#endif
++#ifndef __alpha__
++#undef __alpha__
++#endif
++#ifndef __arm__
++#undef __arm__
++#endif
++#ifndef __armhf__
++#undef __armhf__
++#endif
++#ifndef __arm64_ilp32__
++#undef __arm64_ilp32__
++#endif
++#ifndef __arm64__
++#undef __arm64__
++#endif
++#ifndef __hppa__
++#undef __hppa__
++#endif
++#ifndef __hppa64__
++#undef __hppa64__
++#endif
++#ifndef __ia64_ilp32__
++#undef __ia64_ilp32__
++#endif
++#ifndef __ia64__
++#undef __ia64__
++#endif
++#ifndef __m68k__
++#undef __m68k__
++#endif
++#ifndef __mips__
++#undef __mips__
++#endif
++#ifndef __mipsn32__
++#undef __mipsn32__
++#endif
++#ifndef __mips64__
++#undef __mips64__
++#endif
++#ifndef __powerpc__
++#undef __powerpc__
++#endif
++#ifndef __powerpc64__
++#undef __powerpc64__
++#endif
++#ifndef __powerpc64_elfv2__
++#undef __powerpc64_elfv2__
++#endif
++#ifndef __riscv32__
++#undef __riscv32__
++#endif
++#ifndef __riscv64__
++#undef __riscv64__
++#endif
++#ifndef __riscv32_ilp32__
++#undef __riscv32_ilp32__
++#endif
++#ifndef __riscv32_ilp32f__
++#undef __riscv32_ilp32f__
++#endif
++#ifndef __riscv32_ilp32d__
++#undef __riscv32_ilp32d__
++#endif
++#ifndef __riscv64_ilp32__
++#undef __riscv64_ilp32__
++#endif
++#ifndef __riscv64_ilp32f__
++#undef __riscv64_ilp32f__
++#endif
++#ifndef __riscv64_ilp32d__
++#undef __riscv64_ilp32d__
++#endif
++#ifndef __riscv64_lp64__
++#undef __riscv64_lp64__
++#endif
++#ifndef __riscv64_lp64f__
++#undef __riscv64_lp64f__
++#endif
++#ifndef __riscv64_lp64d__
++#undef __riscv64_lp64d__
++#endif
++#ifndef __s390__
++#undef __s390__
++#endif
++#ifndef __s390x__
++#undef __s390x__
++#endif
++#ifndef __sh__
++#undef __sh__
++#endif
++#ifndef __sparc__
++#undef __sparc__
++#endif
++#ifndef __sparc64__
++#undef __sparc64__
++#endif
++])
++
++])
++
++
++dnl Sets the HOST_CPU_C_ABI_32BIT variable to 'yes' if the C language ABI
++dnl (application binary interface) is a 32-bit one, or to 'no' otherwise.
++dnl This is a simplified variant of gl_HOST_CPU_C_ABI.
++AC_DEFUN([gl_HOST_CPU_C_ABI_32BIT],
++[
++ AC_REQUIRE([AC_CANONICAL_HOST])
++ AC_CACHE_CHECK([32-bit host C ABI], [gl_cv_host_cpu_c_abi_32bit],
++ [if test -n "$gl_cv_host_cpu_c_abi"; then
++ case "$gl_cv_host_cpu_c_abi" in
++ i386 | x86_64-x32 | arm | armhf | arm64-ilp32 | hppa | ia64-ilp32 | mips | mipsn32 | powerpc | riscv*-ilp32* | s390 | sparc)
++ gl_cv_host_cpu_c_abi_32bit=yes ;;
++ *)
++ gl_cv_host_cpu_c_abi_32bit=no ;;
++ esac
++ else
++ case "$host_cpu" in
++
++changequote(,)dnl
++ i[4567]86 )
++changequote([,])dnl
++ gl_cv_host_cpu_c_abi_32bit=yes
++ ;;
++
++ x86_64 )
++ # On x86_64 systems, the C compiler may be generating code in one of
++ # these ABIs:
++ # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64.
++ # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64
++ # with native Windows (mingw, MSVC).
++ # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32.
++ # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if (defined __x86_64__ || defined __amd64__ \
++ || defined _M_X64 || defined _M_AMD64) \
++ && !(defined __ILP32__ || defined _ILP32)
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi_32bit=no],
++ [gl_cv_host_cpu_c_abi_32bit=yes])
++ ;;
++
++ arm* | aarch64 )
++ # Assume arm with EABI.
++ # On arm64 systems, the C compiler may be generating code in one of
++ # these ABIs:
++ # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64.
++ # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32.
++ # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __aarch64__ && !(defined __ILP32__ || defined _ILP32)
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi_32bit=no],
++ [gl_cv_host_cpu_c_abi_32bit=yes])
++ ;;
++
++ hppa1.0 | hppa1.1 | hppa2.0* | hppa64 )
++ # On hppa, the C compiler may be generating 32-bit code or 64-bit
++ # code. In the latter case, it defines _LP64 and __LP64__.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#ifdef __LP64__
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi_32bit=no],
++ [gl_cv_host_cpu_c_abi_32bit=yes])
++ ;;
++
++ ia64* )
++ # On ia64 on HP-UX, the C compiler may be generating 64-bit code or
++ # 32-bit code. In the latter case, it defines _ILP32.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#ifdef _ILP32
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi_32bit=yes],
++ [gl_cv_host_cpu_c_abi_32bit=no])
++ ;;
++
++ mips* )
++ # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this
++ # at 32.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64)
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi_32bit=no],
++ [gl_cv_host_cpu_c_abi_32bit=yes])
++ ;;
++
++ powerpc* )
++ # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD.
++ # No need to distinguish them here; the caller may distinguish
++ # them based on the OS.
++ # On powerpc64 systems, the C compiler may still be generating
++ # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may
++ # be generating 64-bit code.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __powerpc64__ || defined _ARCH_PPC64
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi_32bit=no],
++ [gl_cv_host_cpu_c_abi_32bit=yes])
++ ;;
++
++ rs6000 )
++ gl_cv_host_cpu_c_abi_32bit=yes
++ ;;
++
++ riscv32 | riscv64 )
++ # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d.
++ # Size of 'long' and 'void *':
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __LP64__
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi_32bit=no],
++ [gl_cv_host_cpu_c_abi_32bit=yes])
++ ;;
++
++ s390* )
++ # On s390x, the C compiler may be generating 64-bit (= s390x) code
++ # or 31-bit (= s390) code.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __LP64__ || defined __s390x__
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi_32bit=no],
++ [gl_cv_host_cpu_c_abi_32bit=yes])
++ ;;
++
++ sparc | sparc64 )
++ # UltraSPARCs running Linux have `uname -m` = "sparc64", but the
++ # C compiler still generates 32-bit code.
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __sparcv9 || defined __arch64__
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_host_cpu_c_abi_32bit=no],
++ [gl_cv_host_cpu_c_abi_32bit=yes])
++ ;;
++
++ *)
++ gl_cv_host_cpu_c_abi_32bit=no
++ ;;
++ esac
++ fi
++ ])
++
++ HOST_CPU_C_ABI_32BIT="$gl_cv_host_cpu_c_abi_32bit"
++])
+diff -uprN clean/lrzsz-0.12.20/m4/iconv.m4 lrzsz-0.12.20/m4/iconv.m4
+--- clean/lrzsz-0.12.20/m4/iconv.m4 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/m4/iconv.m4 2019-11-25 18:21:18.000000000 +0000
+@@ -0,0 +1,288 @@
++# iconv.m4 serial 21
++dnl Copyright (C) 2000-2002, 2007-2014, 2016-2019 Free Software Foundation,
++dnl Inc.
++dnl This file is free software; the Free Software Foundation
++dnl gives unlimited permission to copy and/or distribute it,
++dnl with or without modifications, as long as this notice is preserved.
++
++dnl From Bruno Haible.
++
++AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
++[
++ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
++ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
++ AC_REQUIRE([AC_LIB_RPATH])
++
++ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
++ dnl accordingly.
++ AC_LIB_LINKFLAGS_BODY([iconv])
++])
++
++AC_DEFUN([AM_ICONV_LINK],
++[
++ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
++ dnl those with the standalone portable GNU libiconv installed).
++ AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
++
++ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
++ dnl accordingly.
++ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
++
++ dnl Add $INCICONV to CPPFLAGS before performing the following checks,
++ dnl because if the user has installed libiconv and not disabled its use
++ dnl via --without-libiconv-prefix, he wants to use it. The first
++ dnl AC_LINK_IFELSE will then fail, the second AC_LINK_IFELSE will succeed.
++ am_save_CPPFLAGS="$CPPFLAGS"
++ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
++
++ AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [
++ am_cv_func_iconv="no, consider installing GNU libiconv"
++ am_cv_lib_iconv=no
++ AC_LINK_IFELSE(
++ [AC_LANG_PROGRAM(
++ [[
++#include <stdlib.h>
++#include <iconv.h>
++ ]],
++ [[iconv_t cd = iconv_open("","");
++ iconv(cd,NULL,NULL,NULL,NULL);
++ iconv_close(cd);]])],
++ [am_cv_func_iconv=yes])
++ if test "$am_cv_func_iconv" != yes; then
++ am_save_LIBS="$LIBS"
++ LIBS="$LIBS $LIBICONV"
++ AC_LINK_IFELSE(
++ [AC_LANG_PROGRAM(
++ [[
++#include <stdlib.h>
++#include <iconv.h>
++ ]],
++ [[iconv_t cd = iconv_open("","");
++ iconv(cd,NULL,NULL,NULL,NULL);
++ iconv_close(cd);]])],
++ [am_cv_lib_iconv=yes]
++ [am_cv_func_iconv=yes])
++ LIBS="$am_save_LIBS"
++ fi
++ ])
++ if test "$am_cv_func_iconv" = yes; then
++ AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [
++ dnl This tests against bugs in AIX 5.1, AIX 6.1..7.1, HP-UX 11.11,
++ dnl Solaris 10.
++ am_save_LIBS="$LIBS"
++ if test $am_cv_lib_iconv = yes; then
++ LIBS="$LIBS $LIBICONV"
++ fi
++ am_cv_func_iconv_works=no
++ for ac_iconv_const in '' 'const'; do
++ AC_RUN_IFELSE(
++ [AC_LANG_PROGRAM(
++ [[
++#include <iconv.h>
++#include <string.h>
++
++#ifndef ICONV_CONST
++# define ICONV_CONST $ac_iconv_const
++#endif
++ ]],
++ [[int result = 0;
++ /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
++ returns. */
++ {
++ iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
++ if (cd_utf8_to_88591 != (iconv_t)(-1))
++ {
++ static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */
++ char buf[10];
++ ICONV_CONST char *inptr = input;
++ size_t inbytesleft = strlen (input);
++ char *outptr = buf;
++ size_t outbytesleft = sizeof (buf);
++ size_t res = iconv (cd_utf8_to_88591,
++ &inptr, &inbytesleft,
++ &outptr, &outbytesleft);
++ if (res == 0)
++ result |= 1;
++ iconv_close (cd_utf8_to_88591);
++ }
++ }
++ /* Test against Solaris 10 bug: Failures are not distinguishable from
++ successful returns. */
++ {
++ iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
++ if (cd_ascii_to_88591 != (iconv_t)(-1))
++ {
++ static ICONV_CONST char input[] = "\263";
++ char buf[10];
++ ICONV_CONST char *inptr = input;
++ size_t inbytesleft = strlen (input);
++ char *outptr = buf;
++ size_t outbytesleft = sizeof (buf);
++ size_t res = iconv (cd_ascii_to_88591,
++ &inptr, &inbytesleft,
++ &outptr, &outbytesleft);
++ if (res == 0)
++ result |= 2;
++ iconv_close (cd_ascii_to_88591);
++ }
++ }
++ /* Test against AIX 6.1..7.1 bug: Buffer overrun. */
++ {
++ iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1");
++ if (cd_88591_to_utf8 != (iconv_t)(-1))
++ {
++ static ICONV_CONST char input[] = "\304";
++ static char buf[2] = { (char)0xDE, (char)0xAD };
++ ICONV_CONST char *inptr = input;
++ size_t inbytesleft = 1;
++ char *outptr = buf;
++ size_t outbytesleft = 1;
++ size_t res = iconv (cd_88591_to_utf8,
++ &inptr, &inbytesleft,
++ &outptr, &outbytesleft);
++ if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD)
++ result |= 4;
++ iconv_close (cd_88591_to_utf8);
++ }
++ }
++#if 0 /* This bug could be worked around by the caller. */
++ /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
++ {
++ iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
++ if (cd_88591_to_utf8 != (iconv_t)(-1))
++ {
++ static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
++ char buf[50];
++ ICONV_CONST char *inptr = input;
++ size_t inbytesleft = strlen (input);
++ char *outptr = buf;
++ size_t outbytesleft = sizeof (buf);
++ size_t res = iconv (cd_88591_to_utf8,
++ &inptr, &inbytesleft,
++ &outptr, &outbytesleft);
++ if ((int)res > 0)
++ result |= 8;
++ iconv_close (cd_88591_to_utf8);
++ }
++ }
++#endif
++ /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
++ provided. */
++ {
++ /* Try standardized names. */
++ iconv_t cd1 = iconv_open ("UTF-8", "EUC-JP");
++ /* Try IRIX, OSF/1 names. */
++ iconv_t cd2 = iconv_open ("UTF-8", "eucJP");
++ /* Try AIX names. */
++ iconv_t cd3 = iconv_open ("UTF-8", "IBM-eucJP");
++ /* Try HP-UX names. */
++ iconv_t cd4 = iconv_open ("utf8", "eucJP");
++ if (cd1 == (iconv_t)(-1) && cd2 == (iconv_t)(-1)
++ && cd3 == (iconv_t)(-1) && cd4 == (iconv_t)(-1))
++ result |= 16;
++ if (cd1 != (iconv_t)(-1))
++ iconv_close (cd1);
++ if (cd2 != (iconv_t)(-1))
++ iconv_close (cd2);
++ if (cd3 != (iconv_t)(-1))
++ iconv_close (cd3);
++ if (cd4 != (iconv_t)(-1))
++ iconv_close (cd4);
++ }
++ return result;
++]])],
++ [am_cv_func_iconv_works=yes], ,
++ [case "$host_os" in
++ aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
++ *) am_cv_func_iconv_works="guessing yes" ;;
++ esac])
++ test "$am_cv_func_iconv_works" = no || break
++ done
++ LIBS="$am_save_LIBS"
++ ])
++ case "$am_cv_func_iconv_works" in
++ *no) am_func_iconv=no am_cv_lib_iconv=no ;;
++ *) am_func_iconv=yes ;;
++ esac
++ else
++ am_func_iconv=no am_cv_lib_iconv=no
++ fi
++ if test "$am_func_iconv" = yes; then
++ AC_DEFINE([HAVE_ICONV], [1],
++ [Define if you have the iconv() function and it works.])
++ fi
++ if test "$am_cv_lib_iconv" = yes; then
++ AC_MSG_CHECKING([how to link with libiconv])
++ AC_MSG_RESULT([$LIBICONV])
++ else
++ dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
++ dnl either.
++ CPPFLAGS="$am_save_CPPFLAGS"
++ LIBICONV=
++ LTLIBICONV=
++ fi
++ AC_SUBST([LIBICONV])
++ AC_SUBST([LTLIBICONV])
++])
++
++dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to
++dnl avoid warnings like
++dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required".
++dnl This is tricky because of the way 'aclocal' is implemented:
++dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN.
++dnl Otherwise aclocal's initial scan pass would miss the macro definition.
++dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions.
++dnl Otherwise aclocal would emit many "Use of uninitialized value $1"
++dnl warnings.
++m4_define([gl_iconv_AC_DEFUN],
++ m4_version_prereq([2.64],
++ [[AC_DEFUN_ONCE(
++ [$1], [$2])]],
++ [m4_ifdef([gl_00GNULIB],
++ [[AC_DEFUN_ONCE(
++ [$1], [$2])]],
++ [[AC_DEFUN(
++ [$1], [$2])]])]))
++gl_iconv_AC_DEFUN([AM_ICONV],
++[
++ AM_ICONV_LINK
++ if test "$am_cv_func_iconv" = yes; then
++ AC_MSG_CHECKING([for iconv declaration])
++ AC_CACHE_VAL([am_cv_proto_iconv], [
++ AC_COMPILE_IFELSE(
++ [AC_LANG_PROGRAM(
++ [[
++#include <stdlib.h>
++#include <iconv.h>
++extern
++#ifdef __cplusplus
++"C"
++#endif
++#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus)
++size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
++#else
++size_t iconv();
++#endif
++ ]],
++ [[]])],
++ [am_cv_proto_iconv_arg1=""],
++ [am_cv_proto_iconv_arg1="const"])
++ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
++ am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
++ AC_MSG_RESULT([
++ $am_cv_proto_iconv])
++ else
++ dnl When compiling GNU libiconv on a system that does not have iconv yet,
++ dnl pick the POSIX compliant declaration without 'const'.
++ am_cv_proto_iconv_arg1=""
++ fi
++ AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1],
++ [Define as const if the declaration of iconv() needs const.])
++ dnl Also substitute ICONV_CONST in the gnulib generated <iconv.h>.
++ m4_ifdef([gl_ICONV_H_DEFAULTS],
++ [AC_REQUIRE([gl_ICONV_H_DEFAULTS])
++ if test -n "$am_cv_proto_iconv_arg1"; then
++ ICONV_CONST="const"
++ fi
++ ])
++])
+diff -uprN clean/lrzsz-0.12.20/m4/intlmacosx.m4 lrzsz-0.12.20/m4/intlmacosx.m4
+--- clean/lrzsz-0.12.20/m4/intlmacosx.m4 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/m4/intlmacosx.m4 2019-11-25 18:21:18.000000000 +0000
+@@ -0,0 +1,72 @@
++# intlmacosx.m4 serial 6 (gettext-0.20)
++dnl Copyright (C) 2004-2014, 2016, 2019 Free Software Foundation, Inc.
++dnl This file is free software; the Free Software Foundation
++dnl gives unlimited permission to copy and/or distribute it,
++dnl with or without modifications, as long as this notice is preserved.
++dnl
++dnl This file can be used in projects which are not available under
++dnl the GNU General Public License or the GNU Library General Public
++dnl License but which still want to provide support for the GNU gettext
++dnl functionality.
++dnl Please note that the actual code of the GNU gettext library is covered
++dnl by the GNU Library General Public License, and the rest of the GNU
++dnl gettext package is covered by the GNU General Public License.
++dnl They are *not* in the public domain.
++
++dnl Checks for special options needed on Mac OS X.
++dnl Defines INTL_MACOSX_LIBS.
++AC_DEFUN([gt_INTL_MACOSX],
++[
++ dnl Check for API introduced in Mac OS X 10.4.
++ AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
++ [gt_cv_func_CFPreferencesCopyAppValue],
++ [gt_save_LIBS="$LIBS"
++ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
++ AC_LINK_IFELSE(
++ [AC_LANG_PROGRAM(
++ [[#include <CoreFoundation/CFPreferences.h>]],
++ [[CFPreferencesCopyAppValue(NULL, NULL)]])],
++ [gt_cv_func_CFPreferencesCopyAppValue=yes],
++ [gt_cv_func_CFPreferencesCopyAppValue=no])
++ LIBS="$gt_save_LIBS"])
++ if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
++ AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1],
++ [Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
++ fi
++ dnl Check for API introduced in Mac OS X 10.5.
++ AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent],
++ [gt_save_LIBS="$LIBS"
++ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
++ AC_LINK_IFELSE(
++ [AC_LANG_PROGRAM(
++ [[#include <CoreFoundation/CFLocale.h>]],
++ [[CFLocaleCopyCurrent();]])],
++ [gt_cv_func_CFLocaleCopyCurrent=yes],
++ [gt_cv_func_CFLocaleCopyCurrent=no])
++ LIBS="$gt_save_LIBS"])
++ if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
++ AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1],
++ [Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the CoreFoundation framework.])
++ fi
++ AC_CACHE_CHECK([for CFLocaleCopyPreferredLanguages], [gt_cv_func_CFLocaleCopyPreferredLanguages],
++ [gt_save_LIBS="$LIBS"
++ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
++ AC_LINK_IFELSE(
++ [AC_LANG_PROGRAM(
++ [[#include <CoreFoundation/CFLocale.h>]],
++ [[CFLocaleCopyPreferredLanguages();]])],
++ [gt_cv_func_CFLocaleCopyPreferredLanguages=yes],
++ [gt_cv_func_CFLocaleCopyPreferredLanguages=no])
++ LIBS="$gt_save_LIBS"])
++ if test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
++ AC_DEFINE([HAVE_CFLOCALECOPYPREFERREDLANGUAGES], [1],
++ [Define to 1 if you have the Mac OS X function CFLocaleCopyPreferredLanguages in the CoreFoundation framework.])
++ fi
++ INTL_MACOSX_LIBS=
++ if test $gt_cv_func_CFPreferencesCopyAppValue = yes \
++ || test $gt_cv_func_CFLocaleCopyCurrent = yes \
++ || test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
++ INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
++ fi
++ AC_SUBST([INTL_MACOSX_LIBS])
++])
+diff -uprN clean/lrzsz-0.12.20/m4/lib-ld.m4 lrzsz-0.12.20/m4/lib-ld.m4
+--- clean/lrzsz-0.12.20/m4/lib-ld.m4 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/m4/lib-ld.m4 2019-11-25 18:21:18.000000000 +0000
+@@ -0,0 +1,168 @@
++# lib-ld.m4 serial 9
++dnl Copyright (C) 1996-2003, 2009-2019 Free Software Foundation, Inc.
++dnl This file is free software; the Free Software Foundation
++dnl gives unlimited permission to copy and/or distribute it,
++dnl with or without modifications, as long as this notice is preserved.
++
++dnl Subroutines of libtool.m4,
++dnl with replacements s/_*LT_PATH/AC_LIB_PROG/ and s/lt_/acl_/ to avoid
++dnl collision with libtool.m4.
++
++dnl From libtool-2.4. Sets the variable with_gnu_ld to yes or no.
++AC_DEFUN([AC_LIB_PROG_LD_GNU],
++[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld],
++[# I'd rather use --version here, but apparently some GNU lds only accept -v.
++case `$LD -v 2>&1 </dev/null` in
++*GNU* | *'with BFD'*)
++ acl_cv_prog_gnu_ld=yes
++ ;;
++*)
++ acl_cv_prog_gnu_ld=no
++ ;;
++esac])
++with_gnu_ld=$acl_cv_prog_gnu_ld
++])
++
++dnl From libtool-2.4. Sets the variable LD.
++AC_DEFUN([AC_LIB_PROG_LD],
++[AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_CANONICAL_HOST])dnl
++
++AC_ARG_WITH([gnu-ld],
++ [AS_HELP_STRING([--with-gnu-ld],
++ [assume the C compiler uses GNU ld [default=no]])],
++ [test "$withval" = no || with_gnu_ld=yes],
++ [with_gnu_ld=no])dnl
++
++# Prepare PATH_SEPARATOR.
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
++ # contains only /bin. Note that ksh looks also at the FPATH variable,
++ # so we have to set that as well for the test.
++ PATH_SEPARATOR=:
++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
++ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
++ || PATH_SEPARATOR=';'
++ }
++fi
++
++if test -n "$LD"; then
++ AC_MSG_CHECKING([for ld])
++elif test "$GCC" = yes; then
++ AC_MSG_CHECKING([for ld used by $CC])
++elif test "$with_gnu_ld" = yes; then
++ AC_MSG_CHECKING([for GNU ld])
++else
++ AC_MSG_CHECKING([for non-GNU ld])
++fi
++if test -n "$LD"; then
++ # Let the user override the test with a path.
++ :
++else
++ AC_CACHE_VAL([acl_cv_path_LD],
++ [
++ acl_cv_path_LD= # Final result of this test
++ ac_prog=ld # Program to search in $PATH
++ if test "$GCC" = yes; then
++ # Check if gcc -print-prog-name=ld gives a path.
++ case $host in
++ *-*-mingw*)
++ # gcc leaves a trailing carriage return which upsets mingw
++ acl_output=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
++ *)
++ acl_output=`($CC -print-prog-name=ld) 2>&5` ;;
++ esac
++ case $acl_output in
++ # Accept absolute paths.
++ [[\\/]]* | ?:[[\\/]]*)
++ re_direlt='/[[^/]][[^/]]*/\.\./'
++ # Canonicalize the pathname of ld
++ acl_output=`echo "$acl_output" | sed 's%\\\\%/%g'`
++ while echo "$acl_output" | grep "$re_direlt" > /dev/null 2>&1; do
++ acl_output=`echo $acl_output | sed "s%$re_direlt%/%"`
++ done
++ # Got the pathname. No search in PATH is needed.
++ acl_cv_path_LD="$acl_output"
++ ac_prog=
++ ;;
++ "")
++ # If it fails, then pretend we aren't using GCC.
++ ;;
++ *)
++ # If it is relative, then search for the first ld in PATH.
++ with_gnu_ld=unknown
++ ;;
++ esac
++ fi
++ if test -n "$ac_prog"; then
++ # Search for $ac_prog in $PATH.
++ acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++ for ac_dir in $PATH; do
++ IFS="$acl_save_ifs"
++ test -z "$ac_dir" && ac_dir=.
++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
++ acl_cv_path_LD="$ac_dir/$ac_prog"
++ # Check to see if the program is GNU ld. I'd rather use --version,
++ # but apparently some variants of GNU ld only accept -v.
++ # Break only if it was the GNU/non-GNU ld that we prefer.
++ case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in
++ *GNU* | *'with BFD'*)
++ test "$with_gnu_ld" != no && break
++ ;;
++ *)
++ test "$with_gnu_ld" != yes && break
++ ;;
++ esac
++ fi
++ done
++ IFS="$acl_save_ifs"
++ fi
++ case $host in
++ *-*-aix*)
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __powerpc64__ || defined _ARCH_PPC64
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [# The compiler produces 64-bit code. Add option '-b64' so that the
++ # linker groks 64-bit object files.
++ case "$acl_cv_path_LD " in
++ *" -b64 "*) ;;
++ *) acl_cv_path_LD="$acl_cv_path_LD -b64" ;;
++ esac
++ ], [])
++ ;;
++ sparc64-*-netbsd*)
++ AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#if defined __sparcv9 || defined __arch64__
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [],
++ [# The compiler produces 32-bit code. Add option '-m elf32_sparc'
++ # so that the linker groks 32-bit object files.
++ case "$acl_cv_path_LD " in
++ *" -m elf32_sparc "*) ;;
++ *) acl_cv_path_LD="$acl_cv_path_LD -m elf32_sparc" ;;
++ esac
++ ])
++ ;;
++ esac
++ ])
++ LD="$acl_cv_path_LD"
++fi
++if test -n "$LD"; then
++ AC_MSG_RESULT([$LD])
++else
++ AC_MSG_RESULT([no])
++ AC_MSG_ERROR([no acceptable ld found in \$PATH])
++fi
++AC_LIB_PROG_LD_GNU
++])
+diff -uprN clean/lrzsz-0.12.20/m4/lib-link.m4 lrzsz-0.12.20/m4/lib-link.m4
+--- clean/lrzsz-0.12.20/m4/lib-link.m4 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/m4/lib-link.m4 2019-11-25 18:21:18.000000000 +0000
+@@ -0,0 +1,774 @@
++# lib-link.m4 serial 28
++dnl Copyright (C) 2001-2019 Free Software Foundation, Inc.
++dnl This file is free software; the Free Software Foundation
++dnl gives unlimited permission to copy and/or distribute it,
++dnl with or without modifications, as long as this notice is preserved.
++
++dnl From Bruno Haible.
++
++AC_PREREQ([2.61])
++
++dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
++dnl the libraries corresponding to explicit and implicit dependencies.
++dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
++dnl augments the CPPFLAGS variable.
++dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
++dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
++AC_DEFUN([AC_LIB_LINKFLAGS],
++[
++ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
++ AC_REQUIRE([AC_LIB_RPATH])
++ pushdef([Name],[m4_translit([$1],[./+-], [____])])
++ pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
++ AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
++ AC_LIB_LINKFLAGS_BODY([$1], [$2])
++ ac_cv_lib[]Name[]_libs="$LIB[]NAME"
++ ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
++ ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
++ ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
++ ])
++ LIB[]NAME="$ac_cv_lib[]Name[]_libs"
++ LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
++ INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
++ LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
++ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
++ AC_SUBST([LIB]NAME)
++ AC_SUBST([LTLIB]NAME)
++ AC_SUBST([LIB]NAME[_PREFIX])
++ dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
++ dnl results of this search when this library appears as a dependency.
++ HAVE_LIB[]NAME=yes
++ popdef([NAME])
++ popdef([Name])
++])
++
++dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message])
++dnl searches for libname and the libraries corresponding to explicit and
++dnl implicit dependencies, together with the specified include files and
++dnl the ability to compile and link the specified testcode. The missing-message
++dnl defaults to 'no' and may contain additional hints for the user.
++dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME}
++dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and
++dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
++dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
++dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
++dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
++AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
++[
++ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
++ AC_REQUIRE([AC_LIB_RPATH])
++ pushdef([Name],[m4_translit([$1],[./+-], [____])])
++ pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
++
++ dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
++ dnl accordingly.
++ AC_LIB_LINKFLAGS_BODY([$1], [$2])
++
++ dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
++ dnl because if the user has installed lib[]Name and not disabled its use
++ dnl via --without-lib[]Name-prefix, he wants to use it.
++ ac_save_CPPFLAGS="$CPPFLAGS"
++ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
++
++ AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
++ ac_save_LIBS="$LIBS"
++ dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS,
++ dnl because these -l options might require -L options that are present in
++ dnl LIBS. -l options benefit only from the -L options listed before it.
++ dnl Otherwise, add it to the front of LIBS, because it may be a static
++ dnl library that depends on another static library that is present in LIBS.
++ dnl Static libraries benefit only from the static libraries listed after
++ dnl it.
++ case " $LIB[]NAME" in
++ *" -l"*) LIBS="$LIBS $LIB[]NAME" ;;
++ *) LIBS="$LIB[]NAME $LIBS" ;;
++ esac
++ AC_LINK_IFELSE(
++ [AC_LANG_PROGRAM([[$3]], [[$4]])],
++ [ac_cv_lib[]Name=yes],
++ [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])'])
++ LIBS="$ac_save_LIBS"
++ ])
++ if test "$ac_cv_lib[]Name" = yes; then
++ HAVE_LIB[]NAME=yes
++ AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.])
++ AC_MSG_CHECKING([how to link with lib[]$1])
++ AC_MSG_RESULT([$LIB[]NAME])
++ else
++ HAVE_LIB[]NAME=no
++ dnl If $LIB[]NAME didn't lead to a usable library, we don't need
++ dnl $INC[]NAME either.
++ CPPFLAGS="$ac_save_CPPFLAGS"
++ LIB[]NAME=
++ LTLIB[]NAME=
++ LIB[]NAME[]_PREFIX=
++ fi
++ AC_SUBST([HAVE_LIB]NAME)
++ AC_SUBST([LIB]NAME)
++ AC_SUBST([LTLIB]NAME)
++ AC_SUBST([LIB]NAME[_PREFIX])
++ popdef([NAME])
++ popdef([Name])
++])
++
++dnl Determine the platform dependent parameters needed to use rpath:
++dnl acl_libext,
++dnl acl_shlibext,
++dnl acl_libname_spec,
++dnl acl_library_names_spec,
++dnl acl_hardcode_libdir_flag_spec,
++dnl acl_hardcode_libdir_separator,
++dnl acl_hardcode_direct,
++dnl acl_hardcode_minus_L.
++AC_DEFUN([AC_LIB_RPATH],
++[
++ dnl Complain if config.rpath is missing.
++ AC_REQUIRE_AUX_FILE([config.rpath])
++ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
++ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
++ AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
++ AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
++ AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [
++ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
++ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
++ . ./conftest.sh
++ rm -f ./conftest.sh
++ acl_cv_rpath=done
++ ])
++ wl="$acl_cv_wl"
++ acl_libext="$acl_cv_libext"
++ acl_shlibext="$acl_cv_shlibext"
++ acl_libname_spec="$acl_cv_libname_spec"
++ acl_library_names_spec="$acl_cv_library_names_spec"
++ acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
++ acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
++ acl_hardcode_direct="$acl_cv_hardcode_direct"
++ acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
++ dnl Determine whether the user wants rpath handling at all.
++ AC_ARG_ENABLE([rpath],
++ [ --disable-rpath do not hardcode runtime library paths],
++ :, enable_rpath=yes)
++])
++
++dnl AC_LIB_FROMPACKAGE(name, package)
++dnl declares that libname comes from the given package. The configure file
++dnl will then not have a --with-libname-prefix option but a
++dnl --with-package-prefix option. Several libraries can come from the same
++dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar
++dnl macro call that searches for libname.
++AC_DEFUN([AC_LIB_FROMPACKAGE],
++[
++ pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
++ define([acl_frompackage_]NAME, [$2])
++ popdef([NAME])
++ pushdef([PACK],[$2])
++ pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-],
++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
++ define([acl_libsinpackage_]PACKUP,
++ m4_ifdef([acl_libsinpackage_]PACKUP, [m4_defn([acl_libsinpackage_]PACKUP)[, ]],)[lib$1])
++ popdef([PACKUP])
++ popdef([PACK])
++])
++
++dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
++dnl the libraries corresponding to explicit and implicit dependencies.
++dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
++dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
++dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
++AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
++[
++ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
++ pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
++ pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])])
++ pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-],
++ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
++ pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])])
++ dnl By default, look in $includedir and $libdir.
++ use_additional=yes
++ AC_LIB_WITH_FINAL_PREFIX([
++ eval additional_includedir=\"$includedir\"
++ eval additional_libdir=\"$libdir\"
++ ])
++ AC_ARG_WITH(PACK[-prefix],
++[[ --with-]]PACK[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib
++ --without-]]PACK[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]],
++[
++ if test "X$withval" = "Xno"; then
++ use_additional=no
++ else
++ if test "X$withval" = "X"; then
++ AC_LIB_WITH_FINAL_PREFIX([
++ eval additional_includedir=\"$includedir\"
++ eval additional_libdir=\"$libdir\"
++ ])
++ else
++ additional_includedir="$withval/include"
++ additional_libdir="$withval/$acl_libdirstem"
++ if test "$acl_libdirstem2" != "$acl_libdirstem" \
++ && test ! -d "$withval/$acl_libdirstem"; then
++ additional_libdir="$withval/$acl_libdirstem2"
++ fi
++ fi
++ fi
++])
++ dnl Search the library and its dependencies in $additional_libdir and
++ dnl $LDFLAGS. Using breadth-first-seach.
++ LIB[]NAME=
++ LTLIB[]NAME=
++ INC[]NAME=
++ LIB[]NAME[]_PREFIX=
++ dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been
++ dnl computed. So it has to be reset here.
++ HAVE_LIB[]NAME=
++ rpathdirs=
++ ltrpathdirs=
++ names_already_handled=
++ names_next_round='$1 $2'
++ while test -n "$names_next_round"; do
++ names_this_round="$names_next_round"
++ names_next_round=
++ for name in $names_this_round; do
++ already_handled=
++ for n in $names_already_handled; do
++ if test "$n" = "$name"; then
++ already_handled=yes
++ break
++ fi
++ done
++ if test -z "$already_handled"; then
++ names_already_handled="$names_already_handled $name"
++ dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
++ dnl or AC_LIB_HAVE_LINKFLAGS call.
++ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
++ eval value=\"\$HAVE_LIB$uppername\"
++ if test -n "$value"; then
++ if test "$value" = yes; then
++ eval value=\"\$LIB$uppername\"
++ test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
++ eval value=\"\$LTLIB$uppername\"
++ test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
++ else
++ dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
++ dnl that this library doesn't exist. So just drop it.
++ :
++ fi
++ else
++ dnl Search the library lib$name in $additional_libdir and $LDFLAGS
++ dnl and the already constructed $LIBNAME/$LTLIBNAME.
++ found_dir=
++ found_la=
++ found_so=
++ found_a=
++ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
++ if test -n "$acl_shlibext"; then
++ shrext=".$acl_shlibext" # typically: shrext=.so
++ else
++ shrext=
++ fi
++ if test $use_additional = yes; then
++ dir="$additional_libdir"
++ dnl The same code as in the loop below:
++ dnl First look for a shared library.
++ if test -n "$acl_shlibext"; then
++ if test -f "$dir/$libname$shrext"; then
++ found_dir="$dir"
++ found_so="$dir/$libname$shrext"
++ else
++ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
++ ver=`(cd "$dir" && \
++ for f in "$libname$shrext".*; do echo "$f"; done \
++ | sed -e "s,^$libname$shrext\\\\.,," \
++ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
++ | sed 1q ) 2>/dev/null`
++ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
++ found_dir="$dir"
++ found_so="$dir/$libname$shrext.$ver"
++ fi
++ else
++ eval library_names=\"$acl_library_names_spec\"
++ for f in $library_names; do
++ if test -f "$dir/$f"; then
++ found_dir="$dir"
++ found_so="$dir/$f"
++ break
++ fi
++ done
++ fi
++ fi
++ fi
++ dnl Then look for a static library.
++ if test "X$found_dir" = "X"; then
++ if test -f "$dir/$libname.$acl_libext"; then
++ found_dir="$dir"
++ found_a="$dir/$libname.$acl_libext"
++ fi
++ fi
++ if test "X$found_dir" != "X"; then
++ if test -f "$dir/$libname.la"; then
++ found_la="$dir/$libname.la"
++ fi
++ fi
++ fi
++ if test "X$found_dir" = "X"; then
++ for x in $LDFLAGS $LTLIB[]NAME; do
++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
++ case "$x" in
++ -L*)
++ dir=`echo "X$x" | sed -e 's/^X-L//'`
++ dnl First look for a shared library.
++ if test -n "$acl_shlibext"; then
++ if test -f "$dir/$libname$shrext"; then
++ found_dir="$dir"
++ found_so="$dir/$libname$shrext"
++ else
++ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
++ ver=`(cd "$dir" && \
++ for f in "$libname$shrext".*; do echo "$f"; done \
++ | sed -e "s,^$libname$shrext\\\\.,," \
++ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
++ | sed 1q ) 2>/dev/null`
++ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
++ found_dir="$dir"
++ found_so="$dir/$libname$shrext.$ver"
++ fi
++ else
++ eval library_names=\"$acl_library_names_spec\"
++ for f in $library_names; do
++ if test -f "$dir/$f"; then
++ found_dir="$dir"
++ found_so="$dir/$f"
++ break
++ fi
++ done
++ fi
++ fi
++ fi
++ dnl Then look for a static library.
++ if test "X$found_dir" = "X"; then
++ if test -f "$dir/$libname.$acl_libext"; then
++ found_dir="$dir"
++ found_a="$dir/$libname.$acl_libext"
++ fi
++ fi
++ if test "X$found_dir" != "X"; then
++ if test -f "$dir/$libname.la"; then
++ found_la="$dir/$libname.la"
++ fi
++ fi
++ ;;
++ esac
++ if test "X$found_dir" != "X"; then
++ break
++ fi
++ done
++ fi
++ if test "X$found_dir" != "X"; then
++ dnl Found the library.
++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
++ if test "X$found_so" != "X"; then
++ dnl Linking with a shared library. We attempt to hardcode its
++ dnl directory into the executable's runpath, unless it's the
++ dnl standard /usr/lib.
++ if test "$enable_rpath" = no \
++ || test "X$found_dir" = "X/usr/$acl_libdirstem" \
++ || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
++ dnl No hardcoding is needed.
++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
++ else
++ dnl Use an explicit option to hardcode DIR into the resulting
++ dnl binary.
++ dnl Potentially add DIR to ltrpathdirs.
++ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
++ haveit=
++ for x in $ltrpathdirs; do
++ if test "X$x" = "X$found_dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ ltrpathdirs="$ltrpathdirs $found_dir"
++ fi
++ dnl The hardcoding into $LIBNAME is system dependent.
++ if test "$acl_hardcode_direct" = yes; then
++ dnl Using DIR/libNAME.so during linking hardcodes DIR into the
++ dnl resulting binary.
++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
++ else
++ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
++ dnl Use an explicit option to hardcode DIR into the resulting
++ dnl binary.
++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
++ dnl Potentially add DIR to rpathdirs.
++ dnl The rpathdirs will be appended to $LIBNAME at the end.
++ haveit=
++ for x in $rpathdirs; do
++ if test "X$x" = "X$found_dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ rpathdirs="$rpathdirs $found_dir"
++ fi
++ else
++ dnl Rely on "-L$found_dir".
++ dnl But don't add it if it's already contained in the LDFLAGS
++ dnl or the already constructed $LIBNAME
++ haveit=
++ for x in $LDFLAGS $LIB[]NAME; do
++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
++ if test "X$x" = "X-L$found_dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
++ fi
++ if test "$acl_hardcode_minus_L" != no; then
++ dnl FIXME: Not sure whether we should use
++ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
++ dnl here.
++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
++ else
++ dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
++ dnl here, because this doesn't fit in flags passed to the
++ dnl compiler. So give up. No hardcoding. This affects only
++ dnl very old systems.
++ dnl FIXME: Not sure whether we should use
++ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
++ dnl here.
++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
++ fi
++ fi
++ fi
++ fi
++ else
++ if test "X$found_a" != "X"; then
++ dnl Linking with a static library.
++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
++ else
++ dnl We shouldn't come here, but anyway it's good to have a
++ dnl fallback.
++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
++ fi
++ fi
++ dnl Assume the include files are nearby.
++ additional_includedir=
++ case "$found_dir" in
++ */$acl_libdirstem | */$acl_libdirstem/)
++ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
++ if test "$name" = '$1'; then
++ LIB[]NAME[]_PREFIX="$basedir"
++ fi
++ additional_includedir="$basedir/include"
++ ;;
++ */$acl_libdirstem2 | */$acl_libdirstem2/)
++ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
++ if test "$name" = '$1'; then
++ LIB[]NAME[]_PREFIX="$basedir"
++ fi
++ additional_includedir="$basedir/include"
++ ;;
++ esac
++ if test "X$additional_includedir" != "X"; then
++ dnl Potentially add $additional_includedir to $INCNAME.
++ dnl But don't add it
++ dnl 1. if it's the standard /usr/include,
++ dnl 2. if it's /usr/local/include and we are using GCC on Linux,
++ dnl 3. if it's already present in $CPPFLAGS or the already
++ dnl constructed $INCNAME,
++ dnl 4. if it doesn't exist as a directory.
++ if test "X$additional_includedir" != "X/usr/include"; then
++ haveit=
++ if test "X$additional_includedir" = "X/usr/local/include"; then
++ if test -n "$GCC"; then
++ case $host_os in
++ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
++ esac
++ fi
++ fi
++ if test -z "$haveit"; then
++ for x in $CPPFLAGS $INC[]NAME; do
++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
++ if test "X$x" = "X-I$additional_includedir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ if test -d "$additional_includedir"; then
++ dnl Really add $additional_includedir to $INCNAME.
++ INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
++ fi
++ fi
++ fi
++ fi
++ fi
++ dnl Look for dependencies.
++ if test -n "$found_la"; then
++ dnl Read the .la file. It defines the variables
++ dnl dlname, library_names, old_library, dependency_libs, current,
++ dnl age, revision, installed, dlopen, dlpreopen, libdir.
++ save_libdir="$libdir"
++ case "$found_la" in
++ */* | *\\*) . "$found_la" ;;
++ *) . "./$found_la" ;;
++ esac
++ libdir="$save_libdir"
++ dnl We use only dependency_libs.
++ for dep in $dependency_libs; do
++ case "$dep" in
++ -L*)
++ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
++ dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
++ dnl But don't add it
++ dnl 1. if it's the standard /usr/lib,
++ dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
++ dnl 3. if it's already present in $LDFLAGS or the already
++ dnl constructed $LIBNAME,
++ dnl 4. if it doesn't exist as a directory.
++ if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
++ && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
++ haveit=
++ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
++ || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
++ if test -n "$GCC"; then
++ case $host_os in
++ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
++ esac
++ fi
++ fi
++ if test -z "$haveit"; then
++ haveit=
++ for x in $LDFLAGS $LIB[]NAME; do
++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
++ if test "X$x" = "X-L$additional_libdir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ if test -d "$additional_libdir"; then
++ dnl Really add $additional_libdir to $LIBNAME.
++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
++ fi
++ fi
++ haveit=
++ for x in $LDFLAGS $LTLIB[]NAME; do
++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
++ if test "X$x" = "X-L$additional_libdir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ if test -d "$additional_libdir"; then
++ dnl Really add $additional_libdir to $LTLIBNAME.
++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
++ fi
++ fi
++ fi
++ fi
++ ;;
++ -R*)
++ dir=`echo "X$dep" | sed -e 's/^X-R//'`
++ if test "$enable_rpath" != no; then
++ dnl Potentially add DIR to rpathdirs.
++ dnl The rpathdirs will be appended to $LIBNAME at the end.
++ haveit=
++ for x in $rpathdirs; do
++ if test "X$x" = "X$dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ rpathdirs="$rpathdirs $dir"
++ fi
++ dnl Potentially add DIR to ltrpathdirs.
++ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
++ haveit=
++ for x in $ltrpathdirs; do
++ if test "X$x" = "X$dir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ ltrpathdirs="$ltrpathdirs $dir"
++ fi
++ fi
++ ;;
++ -l*)
++ dnl Handle this in the next round.
++ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
++ ;;
++ *.la)
++ dnl Handle this in the next round. Throw away the .la's
++ dnl directory; it is already contained in a preceding -L
++ dnl option.
++ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
++ ;;
++ *)
++ dnl Most likely an immediate library name.
++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
++ ;;
++ esac
++ done
++ fi
++ else
++ dnl Didn't find the library; assume it is in the system directories
++ dnl known to the linker and runtime loader. (All the system
++ dnl directories known to the linker should also be known to the
++ dnl runtime loader, otherwise the system is severely misconfigured.)
++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
++ fi
++ fi
++ fi
++ done
++ done
++ if test "X$rpathdirs" != "X"; then
++ if test -n "$acl_hardcode_libdir_separator"; then
++ dnl Weird platform: only the last -rpath option counts, the user must
++ dnl pass all path elements in one option. We can arrange that for a
++ dnl single library, but not when more than one $LIBNAMEs are used.
++ alldirs=
++ for found_dir in $rpathdirs; do
++ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
++ done
++ dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
++ acl_save_libdir="$libdir"
++ libdir="$alldirs"
++ eval flag=\"$acl_hardcode_libdir_flag_spec\"
++ libdir="$acl_save_libdir"
++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
++ else
++ dnl The -rpath options are cumulative.
++ for found_dir in $rpathdirs; do
++ acl_save_libdir="$libdir"
++ libdir="$found_dir"
++ eval flag=\"$acl_hardcode_libdir_flag_spec\"
++ libdir="$acl_save_libdir"
++ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
++ done
++ fi
++ fi
++ if test "X$ltrpathdirs" != "X"; then
++ dnl When using libtool, the option that works for both libraries and
++ dnl executables is -R. The -R options are cumulative.
++ for found_dir in $ltrpathdirs; do
++ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
++ done
++ fi
++ popdef([PACKLIBS])
++ popdef([PACKUP])
++ popdef([PACK])
++ popdef([NAME])
++])
++
++dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
++dnl unless already present in VAR.
++dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
++dnl contains two or three consecutive elements that belong together.
++AC_DEFUN([AC_LIB_APPENDTOVAR],
++[
++ for element in [$2]; do
++ haveit=
++ for x in $[$1]; do
++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
++ if test "X$x" = "X$element"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ [$1]="${[$1]}${[$1]:+ }$element"
++ fi
++ done
++])
++
++dnl For those cases where a variable contains several -L and -l options
++dnl referring to unknown libraries and directories, this macro determines the
++dnl necessary additional linker options for the runtime path.
++dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
++dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
++dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
++dnl otherwise linking without libtool is assumed.
++AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
++[
++ AC_REQUIRE([AC_LIB_RPATH])
++ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
++ $1=
++ if test "$enable_rpath" != no; then
++ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
++ dnl Use an explicit option to hardcode directories into the resulting
++ dnl binary.
++ rpathdirs=
++ next=
++ for opt in $2; do
++ if test -n "$next"; then
++ dir="$next"
++ dnl No need to hardcode the standard /usr/lib.
++ if test "X$dir" != "X/usr/$acl_libdirstem" \
++ && test "X$dir" != "X/usr/$acl_libdirstem2"; then
++ rpathdirs="$rpathdirs $dir"
++ fi
++ next=
++ else
++ case $opt in
++ -L) next=yes ;;
++ -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
++ dnl No need to hardcode the standard /usr/lib.
++ if test "X$dir" != "X/usr/$acl_libdirstem" \
++ && test "X$dir" != "X/usr/$acl_libdirstem2"; then
++ rpathdirs="$rpathdirs $dir"
++ fi
++ next= ;;
++ *) next= ;;
++ esac
++ fi
++ done
++ if test "X$rpathdirs" != "X"; then
++ if test -n ""$3""; then
++ dnl libtool is used for linking. Use -R options.
++ for dir in $rpathdirs; do
++ $1="${$1}${$1:+ }-R$dir"
++ done
++ else
++ dnl The linker is used for linking directly.
++ if test -n "$acl_hardcode_libdir_separator"; then
++ dnl Weird platform: only the last -rpath option counts, the user
++ dnl must pass all path elements in one option.
++ alldirs=
++ for dir in $rpathdirs; do
++ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
++ done
++ acl_save_libdir="$libdir"
++ libdir="$alldirs"
++ eval flag=\"$acl_hardcode_libdir_flag_spec\"
++ libdir="$acl_save_libdir"
++ $1="$flag"
++ else
++ dnl The -rpath options are cumulative.
++ for dir in $rpathdirs; do
++ acl_save_libdir="$libdir"
++ libdir="$dir"
++ eval flag=\"$acl_hardcode_libdir_flag_spec\"
++ libdir="$acl_save_libdir"
++ $1="${$1}${$1:+ }$flag"
++ done
++ fi
++ fi
++ fi
++ fi
++ fi
++ AC_SUBST([$1])
++])
+diff -uprN clean/lrzsz-0.12.20/m4/lib-prefix.m4 lrzsz-0.12.20/m4/lib-prefix.m4
+--- clean/lrzsz-0.12.20/m4/lib-prefix.m4 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/m4/lib-prefix.m4 2019-11-25 18:21:18.000000000 +0000
+@@ -0,0 +1,249 @@
++# lib-prefix.m4 serial 14
++dnl Copyright (C) 2001-2005, 2008-2019 Free Software Foundation, Inc.
++dnl This file is free software; the Free Software Foundation
++dnl gives unlimited permission to copy and/or distribute it,
++dnl with or without modifications, as long as this notice is preserved.
++
++dnl From Bruno Haible.
++
++dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
++dnl to access previously installed libraries. The basic assumption is that
++dnl a user will want packages to use other packages he previously installed
++dnl with the same --prefix option.
++dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
++dnl libraries, but is otherwise very convenient.
++AC_DEFUN([AC_LIB_PREFIX],
++[
++ AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
++ AC_REQUIRE([AC_PROG_CC])
++ AC_REQUIRE([AC_CANONICAL_HOST])
++ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
++ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
++ dnl By default, look in $includedir and $libdir.
++ use_additional=yes
++ AC_LIB_WITH_FINAL_PREFIX([
++ eval additional_includedir=\"$includedir\"
++ eval additional_libdir=\"$libdir\"
++ ])
++ AC_ARG_WITH([lib-prefix],
++[[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
++ --without-lib-prefix don't search for libraries in includedir and libdir]],
++[
++ if test "X$withval" = "Xno"; then
++ use_additional=no
++ else
++ if test "X$withval" = "X"; then
++ AC_LIB_WITH_FINAL_PREFIX([
++ eval additional_includedir=\"$includedir\"
++ eval additional_libdir=\"$libdir\"
++ ])
++ else
++ additional_includedir="$withval/include"
++ additional_libdir="$withval/$acl_libdirstem"
++ fi
++ fi
++])
++ if test $use_additional = yes; then
++ dnl Potentially add $additional_includedir to $CPPFLAGS.
++ dnl But don't add it
++ dnl 1. if it's the standard /usr/include,
++ dnl 2. if it's already present in $CPPFLAGS,
++ dnl 3. if it's /usr/local/include and we are using GCC on Linux,
++ dnl 4. if it doesn't exist as a directory.
++ if test "X$additional_includedir" != "X/usr/include"; then
++ haveit=
++ for x in $CPPFLAGS; do
++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
++ if test "X$x" = "X-I$additional_includedir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ if test "X$additional_includedir" = "X/usr/local/include"; then
++ if test -n "$GCC"; then
++ case $host_os in
++ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
++ esac
++ fi
++ fi
++ if test -z "$haveit"; then
++ if test -d "$additional_includedir"; then
++ dnl Really add $additional_includedir to $CPPFLAGS.
++ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
++ fi
++ fi
++ fi
++ fi
++ dnl Potentially add $additional_libdir to $LDFLAGS.
++ dnl But don't add it
++ dnl 1. if it's the standard /usr/lib,
++ dnl 2. if it's already present in $LDFLAGS,
++ dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
++ dnl 4. if it doesn't exist as a directory.
++ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
++ haveit=
++ for x in $LDFLAGS; do
++ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
++ if test "X$x" = "X-L$additional_libdir"; then
++ haveit=yes
++ break
++ fi
++ done
++ if test -z "$haveit"; then
++ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
++ if test -n "$GCC"; then
++ case $host_os in
++ linux*) haveit=yes;;
++ esac
++ fi
++ fi
++ if test -z "$haveit"; then
++ if test -d "$additional_libdir"; then
++ dnl Really add $additional_libdir to $LDFLAGS.
++ LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
++ fi
++ fi
++ fi
++ fi
++ fi
++])
++
++dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
++dnl acl_final_exec_prefix, containing the values to which $prefix and
++dnl $exec_prefix will expand at the end of the configure script.
++AC_DEFUN([AC_LIB_PREPARE_PREFIX],
++[
++ dnl Unfortunately, prefix and exec_prefix get only finally determined
++ dnl at the end of configure.
++ if test "X$prefix" = "XNONE"; then
++ acl_final_prefix="$ac_default_prefix"
++ else
++ acl_final_prefix="$prefix"
++ fi
++ if test "X$exec_prefix" = "XNONE"; then
++ acl_final_exec_prefix='${prefix}'
++ else
++ acl_final_exec_prefix="$exec_prefix"
++ fi
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
++ prefix="$acl_save_prefix"
++])
++
++dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
++dnl variables prefix and exec_prefix bound to the values they will have
++dnl at the end of the configure script.
++AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
++[
++ acl_save_prefix="$prefix"
++ prefix="$acl_final_prefix"
++ acl_save_exec_prefix="$exec_prefix"
++ exec_prefix="$acl_final_exec_prefix"
++ $1
++ exec_prefix="$acl_save_exec_prefix"
++ prefix="$acl_save_prefix"
++])
++
++dnl AC_LIB_PREPARE_MULTILIB creates
++dnl - a variable acl_libdirstem, containing the basename of the libdir, either
++dnl "lib" or "lib64" or "lib/64",
++dnl - a variable acl_libdirstem2, as a secondary possible value for
++dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or
++dnl "lib/amd64".
++AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
++[
++ dnl There is no formal standard regarding lib and lib64.
++ dnl On glibc systems, the current practice is that on a system supporting
++ dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
++ dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine
++ dnl the compiler's default mode by looking at the compiler's library search
++ dnl path. If at least one of its elements ends in /lib64 or points to a
++ dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI.
++ dnl Otherwise we use the default, namely "lib".
++ dnl On Solaris systems, the current practice is that on a system supporting
++ dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
++ dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or
++ dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib.
++ AC_REQUIRE([AC_CANONICAL_HOST])
++ AC_REQUIRE([gl_HOST_CPU_C_ABI_32BIT])
++
++ case "$host_os" in
++ solaris*)
++ AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit],
++ [AC_COMPILE_IFELSE(
++ [AC_LANG_SOURCE(
++ [[#ifdef _LP64
++ int ok;
++ #else
++ error fail
++ #endif
++ ]])],
++ [gl_cv_solaris_64bit=yes],
++ [gl_cv_solaris_64bit=no])
++ ]);;
++ esac
++
++ dnl Allow the user to override the result by setting acl_cv_libdirstems.
++ AC_CACHE_CHECK([for the common suffixes of directories in the library search path],
++ [acl_cv_libdirstems],
++ [acl_libdirstem=lib
++ acl_libdirstem2=
++ case "$host_os" in
++ solaris*)
++ dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment
++ dnl <https://docs.oracle.com/cd/E19253-01/816-5138/dev-env/index.html>.
++ dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link."
++ dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the
++ dnl symlink is missing, so we set acl_libdirstem2 too.
++ if test $gl_cv_solaris_64bit = yes; then
++ acl_libdirstem=lib/64
++ case "$host_cpu" in
++ sparc*) acl_libdirstem2=lib/sparcv9 ;;
++ i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
++ esac
++ fi
++ ;;
++ *)
++ dnl If $CC generates code for a 32-bit ABI, the libraries are
++ dnl surely under $prefix/lib, not $prefix/lib64.
++ if test "$HOST_CPU_C_ABI_32BIT" != yes; then
++ dnl The result is a property of the system. However, non-system
++ dnl compilers sometimes have odd library search paths. Therefore
++ dnl prefer asking /usr/bin/gcc, if available, rather than $CC.
++ searchpath=`(if test -f /usr/bin/gcc \
++ && LC_ALL=C /usr/bin/gcc -print-search-dirs >/dev/null 2>/dev/null; then \
++ LC_ALL=C /usr/bin/gcc -print-search-dirs; \
++ else \
++ LC_ALL=C $CC -print-search-dirs; \
++ fi) 2>/dev/null \
++ | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
++ if test -n "$searchpath"; then
++ acl_save_IFS="${IFS= }"; IFS=":"
++ for searchdir in $searchpath; do
++ if test -d "$searchdir"; then
++ case "$searchdir" in
++ */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
++ */../ | */.. )
++ # Better ignore directories of this form. They are misleading.
++ ;;
++ *) searchdir=`cd "$searchdir" && pwd`
++ case "$searchdir" in
++ */lib64 ) acl_libdirstem=lib64 ;;
++ esac ;;
++ esac
++ fi
++ done
++ IFS="$acl_save_IFS"
++ fi
++ fi
++ ;;
++ esac
++ test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
++ acl_cv_libdirstems="$acl_libdirstem,$acl_libdirstem2"
++ ])
++ # Decompose acl_cv_libdirstems into acl_libdirstem and acl_libdirstem2.
++ acl_libdirstem=`echo "$acl_cv_libdirstems" | sed -e 's/,.*//'`
++ acl_libdirstem2=`echo "$acl_cv_libdirstems" | sed -e '/,/s/.*,//'`
++])
+diff -uprN clean/lrzsz-0.12.20/m4/nls.m4 lrzsz-0.12.20/m4/nls.m4
+--- clean/lrzsz-0.12.20/m4/nls.m4 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/m4/nls.m4 2019-11-25 18:21:18.000000000 +0000
+@@ -0,0 +1,32 @@
++# nls.m4 serial 5 (gettext-0.18)
++dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014, 2016, 2019 Free Software
++dnl Foundation, Inc.
++dnl This file is free software; the Free Software Foundation
++dnl gives unlimited permission to copy and/or distribute it,
++dnl with or without modifications, as long as this notice is preserved.
++dnl
++dnl This file can be used in projects which are not available under
++dnl the GNU General Public License or the GNU Library General Public
++dnl License but which still want to provide support for the GNU gettext
++dnl functionality.
++dnl Please note that the actual code of the GNU gettext library is covered
++dnl by the GNU Library General Public License, and the rest of the GNU
++dnl gettext package is covered by the GNU General Public License.
++dnl They are *not* in the public domain.
++
++dnl Authors:
++dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
++dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
++
++AC_PREREQ([2.50])
++
++AC_DEFUN([AM_NLS],
++[
++ AC_MSG_CHECKING([whether NLS is requested])
++ dnl Default is enabled NLS
++ AC_ARG_ENABLE([nls],
++ [ --disable-nls do not use Native Language Support],
++ USE_NLS=$enableval, USE_NLS=yes)
++ AC_MSG_RESULT([$USE_NLS])
++ AC_SUBST([USE_NLS])
++])
+diff -uprN clean/lrzsz-0.12.20/m4/po.m4 lrzsz-0.12.20/m4/po.m4
+--- clean/lrzsz-0.12.20/m4/po.m4 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/m4/po.m4 2019-11-25 18:21:18.000000000 +0000
+@@ -0,0 +1,450 @@
++# po.m4 serial 30 (gettext-0.20)
++dnl Copyright (C) 1995-2014, 2016, 2018-2019 Free Software Foundation, Inc.
++dnl This file is free software; the Free Software Foundation
++dnl gives unlimited permission to copy and/or distribute it,
++dnl with or without modifications, as long as this notice is preserved.
++dnl
++dnl This file can be used in projects which are not available under
++dnl the GNU General Public License or the GNU Library General Public
++dnl License but which still want to provide support for the GNU gettext
++dnl functionality.
++dnl Please note that the actual code of the GNU gettext library is covered
++dnl by the GNU Library General Public License, and the rest of the GNU
++dnl gettext package is covered by the GNU General Public License.
++dnl They are *not* in the public domain.
++
++dnl Authors:
++dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
++dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
++
++AC_PREREQ([2.60])
++
++dnl Checks for all prerequisites of the po subdirectory.
++AC_DEFUN([AM_PO_SUBDIRS],
++[
++ AC_REQUIRE([AC_PROG_MAKE_SET])dnl
++ AC_REQUIRE([AC_PROG_INSTALL])dnl
++ AC_REQUIRE([AC_PROG_MKDIR_P])dnl
++ AC_REQUIRE([AC_PROG_SED])dnl
++ AC_REQUIRE([AM_NLS])dnl
++
++ dnl Release version of the gettext macros. This is used to ensure that
++ dnl the gettext macros and po/Makefile.in.in are in sync.
++ AC_SUBST([GETTEXT_MACRO_VERSION], [0.20])
++
++ dnl Perform the following tests also if --disable-nls has been given,
++ dnl because they are needed for "make dist" to work.
++
++ dnl Search for GNU msgfmt in the PATH.
++ dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
++ dnl The second test excludes FreeBSD msgfmt.
++ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
++ [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
++ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
++ :)
++ AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
++
++ dnl Test whether it is GNU msgfmt >= 0.15.
++changequote(,)dnl
++ case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
++ *) GMSGFMT_015=$GMSGFMT ;;
++ esac
++changequote([,])dnl
++ AC_SUBST([GMSGFMT_015])
++
++ dnl Search for GNU xgettext 0.12 or newer in the PATH.
++ dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
++ dnl The second test excludes FreeBSD xgettext.
++ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
++ [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
++ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
++ :)
++ dnl Remove leftover from FreeBSD xgettext call.
++ rm -f messages.po
++
++ dnl Test whether it is GNU xgettext >= 0.15.
++changequote(,)dnl
++ case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
++ *) XGETTEXT_015=$XGETTEXT ;;
++ esac
++changequote([,])dnl
++ AC_SUBST([XGETTEXT_015])
++
++ dnl Search for GNU msgmerge 0.11 or newer in the PATH.
++ AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
++ [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
++
++ dnl Test whether it is GNU msgmerge >= 0.20.
++ if LC_ALL=C $MSGMERGE --help | grep ' --for-msgfmt ' >/dev/null; then
++ MSGMERGE_FOR_MSGFMT_OPTION='--for-msgfmt'
++ else
++ dnl Test whether it is GNU msgmerge >= 0.12.
++ if LC_ALL=C $MSGMERGE --help | grep ' --no-fuzzy-matching ' >/dev/null; then
++ MSGMERGE_FOR_MSGFMT_OPTION='--no-fuzzy-matching --no-location --quiet'
++ else
++ dnl With these old versions, $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) is
++ dnl slow. But this is not a big problem, as such old gettext versions are
++ dnl hardly in use any more.
++ MSGMERGE_FOR_MSGFMT_OPTION='--no-location --quiet'
++ fi
++ fi
++ AC_SUBST([MSGMERGE_FOR_MSGFMT_OPTION])
++
++ dnl Support for AM_XGETTEXT_OPTION.
++ test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
++ AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
++
++ AC_CONFIG_COMMANDS([po-directories], [[
++ for ac_file in $CONFIG_FILES; do
++ # Support "outfile[:infile[:infile...]]"
++ case "$ac_file" in
++ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
++ esac
++ # PO directories have a Makefile.in generated from Makefile.in.in.
++ case "$ac_file" in */Makefile.in)
++ # Adjust a relative srcdir.
++ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
++ ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
++ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
++ # In autoconf-2.13 it is called $ac_given_srcdir.
++ # In autoconf-2.50 it is called $srcdir.
++ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
++ case "$ac_given_srcdir" in
++ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
++ /*) top_srcdir="$ac_given_srcdir" ;;
++ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
++ esac
++ # Treat a directory as a PO directory if and only if it has a
++ # POTFILES.in file. This allows packages to have multiple PO
++ # directories under different names or in different locations.
++ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
++ rm -f "$ac_dir/POTFILES"
++ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
++ gt_tab=`printf '\t'`
++ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
++ POMAKEFILEDEPS="POTFILES.in"
++ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
++ # on $ac_dir but don't depend on user-specified configuration
++ # parameters.
++ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
++ # The LINGUAS file contains the set of available languages.
++ if test -n "$OBSOLETE_ALL_LINGUAS"; then
++ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
++ fi
++ ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
++ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
++ else
++ # The set of available languages was given in configure.in.
++ ALL_LINGUAS=$OBSOLETE_ALL_LINGUAS
++ fi
++ # Compute POFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
++ # Compute UPDATEPOFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
++ # Compute DUMMYPOFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
++ # Compute GMOFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
++ case "$ac_given_srcdir" in
++ .) srcdirpre= ;;
++ *) srcdirpre='$(srcdir)/' ;;
++ esac
++ POFILES=
++ UPDATEPOFILES=
++ DUMMYPOFILES=
++ GMOFILES=
++ for lang in $ALL_LINGUAS; do
++ POFILES="$POFILES $srcdirpre$lang.po"
++ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
++ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
++ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
++ done
++ # CATALOGS depends on both $ac_dir and the user's LINGUAS
++ # environment variable.
++ INST_LINGUAS=
++ if test -n "$ALL_LINGUAS"; then
++ for presentlang in $ALL_LINGUAS; do
++ useit=no
++ if test "%UNSET%" != "$LINGUAS"; then
++ desiredlanguages="$LINGUAS"
++ else
++ desiredlanguages="$ALL_LINGUAS"
++ fi
++ for desiredlang in $desiredlanguages; do
++ # Use the presentlang catalog if desiredlang is
++ # a. equal to presentlang, or
++ # b. a variant of presentlang (because in this case,
++ # presentlang can be used as a fallback for messages
++ # which are not translated in the desiredlang catalog).
++ case "$desiredlang" in
++ "$presentlang"*) useit=yes;;
++ esac
++ done
++ if test $useit = yes; then
++ INST_LINGUAS="$INST_LINGUAS $presentlang"
++ fi
++ done
++ fi
++ CATALOGS=
++ if test -n "$INST_LINGUAS"; then
++ for lang in $INST_LINGUAS; do
++ CATALOGS="$CATALOGS $lang.gmo"
++ done
++ fi
++ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
++ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
++ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
++ if test -f "$f"; then
++ case "$f" in
++ *.orig | *.bak | *~) ;;
++ *) cat "$f" >> "$ac_dir/Makefile" ;;
++ esac
++ fi
++ done
++ fi
++ ;;
++ esac
++ done]],
++ [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
++ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS.
++ OBSOLETE_ALL_LINGUAS="$ALL_LINGUAS"
++ # Capture the value of LINGUAS because we need it to compute CATALOGS.
++ LINGUAS="${LINGUAS-%UNSET%}"
++ ])
++])
++
++dnl Postprocesses a Makefile in a directory containing PO files.
++AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
++[
++ # When this code is run, in config.status, two variables have already been
++ # set:
++ # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
++ # - LINGUAS is the value of the environment variable LINGUAS at configure
++ # time.
++
++changequote(,)dnl
++ # Adjust a relative srcdir.
++ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
++ ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
++ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
++ # In autoconf-2.13 it is called $ac_given_srcdir.
++ # In autoconf-2.50 it is called $srcdir.
++ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
++ case "$ac_given_srcdir" in
++ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
++ /*) top_srcdir="$ac_given_srcdir" ;;
++ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
++ esac
++
++ # Find a way to echo strings without interpreting backslash.
++ if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
++ gt_echo='echo'
++ else
++ if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
++ gt_echo='printf %s\n'
++ else
++ echo_func () {
++ cat <<EOT
++$*
++EOT
++ }
++ gt_echo='echo_func'
++ fi
++ fi
++
++ # A sed script that extracts the value of VARIABLE from a Makefile.
++ tab=`printf '\t'`
++ sed_x_variable='
++# Test if the hold space is empty.
++x
++s/P/P/
++x
++ta
++# Yes it was empty. Look if we have the expected variable definition.
++/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=/{
++ # Seen the first line of the variable definition.
++ s/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=//
++ ba
++}
++bd
++:a
++# Here we are processing a line from the variable definition.
++# Remove comment, more precisely replace it with a space.
++s/#.*$/ /
++# See if the line ends in a backslash.
++tb
++:b
++s/\\$//
++# Print the line, without the trailing backslash.
++p
++tc
++# There was no trailing backslash. The end of the variable definition is
++# reached. Clear the hold space.
++s/^.*$//
++x
++bd
++:c
++# A trailing backslash means that the variable definition continues in the
++# next line. Put a nonempty string into the hold space to indicate this.
++s/^.*$/P/
++x
++:d
++'
++changequote([,])dnl
++
++ # Set POTFILES to the value of the Makefile variable POTFILES.
++ sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
++ POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
++ # Compute POTFILES_DEPS as
++ # $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
++ POTFILES_DEPS=
++ for file in $POTFILES; do
++ POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
++ done
++ POMAKEFILEDEPS=""
++
++ if test -n "$OBSOLETE_ALL_LINGUAS"; then
++ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
++ fi
++ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
++ # The LINGUAS file contains the set of available languages.
++ ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
++ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
++ else
++ # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
++ sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
++ ALL_LINGUAS=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
++ fi
++ # Compute POFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
++ # Compute UPDATEPOFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
++ # Compute DUMMYPOFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
++ # Compute GMOFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
++ # Compute PROPERTIESFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(DOMAIN)_$(lang).properties)
++ # Compute CLASSFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(DOMAIN)_$(lang).class)
++ # Compute QMFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
++ # Compute MSGFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
++ # Compute RESOURCESDLLFILES
++ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
++ case "$ac_given_srcdir" in
++ .) srcdirpre= ;;
++ *) srcdirpre='$(srcdir)/' ;;
++ esac
++ POFILES=
++ UPDATEPOFILES=
++ DUMMYPOFILES=
++ GMOFILES=
++ PROPERTIESFILES=
++ CLASSFILES=
++ QMFILES=
++ MSGFILES=
++ RESOURCESDLLFILES=
++ for lang in $ALL_LINGUAS; do
++ POFILES="$POFILES $srcdirpre$lang.po"
++ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
++ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
++ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
++ PROPERTIESFILES="$PROPERTIESFILES \$(srcdir)/\$(DOMAIN)_$lang.properties"
++ CLASSFILES="$CLASSFILES \$(srcdir)/\$(DOMAIN)_$lang.class"
++ QMFILES="$QMFILES $srcdirpre$lang.qm"
++ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
++ MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
++ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
++ RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
++ done
++ # CATALOGS depends on both $ac_dir and the user's LINGUAS
++ # environment variable.
++ INST_LINGUAS=
++ if test -n "$ALL_LINGUAS"; then
++ for presentlang in $ALL_LINGUAS; do
++ useit=no
++ if test "%UNSET%" != "$LINGUAS"; then
++ desiredlanguages="$LINGUAS"
++ else
++ desiredlanguages="$ALL_LINGUAS"
++ fi
++ for desiredlang in $desiredlanguages; do
++ # Use the presentlang catalog if desiredlang is
++ # a. equal to presentlang, or
++ # b. a variant of presentlang (because in this case,
++ # presentlang can be used as a fallback for messages
++ # which are not translated in the desiredlang catalog).
++ case "$desiredlang" in
++ "$presentlang"*) useit=yes;;
++ esac
++ done
++ if test $useit = yes; then
++ INST_LINGUAS="$INST_LINGUAS $presentlang"
++ fi
++ done
++ fi
++ CATALOGS=
++ JAVACATALOGS=
++ QTCATALOGS=
++ TCLCATALOGS=
++ CSHARPCATALOGS=
++ if test -n "$INST_LINGUAS"; then
++ for lang in $INST_LINGUAS; do
++ CATALOGS="$CATALOGS $lang.gmo"
++ JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
++ QTCATALOGS="$QTCATALOGS $lang.qm"
++ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
++ TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
++ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
++ CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
++ done
++ fi
++
++ sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
++ tab=`printf '\t'`
++ if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
++ # Add dependencies that cannot be formulated as a simple suffix rule.
++ for lang in $ALL_LINGUAS; do
++ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
++ cat >> "$ac_file.tmp" <<EOF
++$frobbedlang.msg: $lang.po
++${tab}@echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
++${tab}\$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
++EOF
++ done
++ fi
++ if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
++ # Add dependencies that cannot be formulated as a simple suffix rule.
++ for lang in $ALL_LINGUAS; do
++ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
++ cat >> "$ac_file.tmp" <<EOF
++$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
++${tab}@echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
++${tab}\$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
++EOF
++ done
++ fi
++ if test -n "$POMAKEFILEDEPS"; then
++ cat >> "$ac_file.tmp" <<EOF
++Makefile: $POMAKEFILEDEPS
++EOF
++ fi
++ mv "$ac_file.tmp" "$ac_file"
++])
++
++dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
++AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
++[
++ XGETTEXT_EXTRA_OPTIONS=
++])
++
++dnl Registers an option to be passed to xgettext in the po subdirectory.
++AC_DEFUN([AM_XGETTEXT_OPTION],
++[
++ AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
++ XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
++])
+diff -uprN clean/lrzsz-0.12.20/m4/progtest.m4 lrzsz-0.12.20/m4/progtest.m4
+--- clean/lrzsz-0.12.20/m4/progtest.m4 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/m4/progtest.m4 2019-11-25 18:21:18.000000000 +0000
+@@ -0,0 +1,91 @@
++# progtest.m4 serial 7 (gettext-0.18.2)
++dnl Copyright (C) 1996-2003, 2005, 2008-2019 Free Software Foundation, Inc.
++dnl This file is free software; the Free Software Foundation
++dnl gives unlimited permission to copy and/or distribute it,
++dnl with or without modifications, as long as this notice is preserved.
++dnl
++dnl This file can be used in projects which are not available under
++dnl the GNU General Public License or the GNU Library General Public
++dnl License but which still want to provide support for the GNU gettext
++dnl functionality.
++dnl Please note that the actual code of the GNU gettext library is covered
++dnl by the GNU Library General Public License, and the rest of the GNU
++dnl gettext package is covered by the GNU General Public License.
++dnl They are *not* in the public domain.
++
++dnl Authors:
++dnl Ulrich Drepper <drepper@cygnus.com>, 1996.
++
++AC_PREREQ([2.50])
++
++# Search path for a program which passes the given test.
++
++dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
++dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
++AC_DEFUN([AM_PATH_PROG_WITH_TEST],
++[
++# Prepare PATH_SEPARATOR.
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
++ # contains only /bin. Note that ksh looks also at the FPATH variable,
++ # so we have to set that as well for the test.
++ PATH_SEPARATOR=:
++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
++ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
++ || PATH_SEPARATOR=';'
++ }
++fi
++
++# Find out how to test for executable files. Don't use a zero-byte file,
++# as systems may use methods other than mode bits to determine executability.
++cat >conf$$.file <<_ASEOF
++#! /bin/sh
++exit 0
++_ASEOF
++chmod +x conf$$.file
++if test -x conf$$.file >/dev/null 2>&1; then
++ ac_executable_p="test -x"
++else
++ ac_executable_p="test -f"
++fi
++rm -f conf$$.file
++
++# Extract the first word of "$2", so it can be a program name with args.
++set dummy $2; ac_word=[$]2
++AC_MSG_CHECKING([for $ac_word])
++AC_CACHE_VAL([ac_cv_path_$1],
++[case "[$]$1" in
++ [[\\/]]* | ?:[[\\/]]*)
++ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
++ ;;
++ *)
++ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
++ for ac_dir in ifelse([$5], , $PATH, [$5]); do
++ IFS="$ac_save_IFS"
++ test -z "$ac_dir" && ac_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
++ echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
++ if [$3]; then
++ ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
++ break 2
++ fi
++ fi
++ done
++ done
++ IFS="$ac_save_IFS"
++dnl If no 4th arg is given, leave the cache variable unset,
++dnl so AC_PATH_PROGS will keep looking.
++ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
++])dnl
++ ;;
++esac])dnl
++$1="$ac_cv_path_$1"
++if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
++ AC_MSG_RESULT([$][$1])
++else
++ AC_MSG_RESULT([no])
++fi
++AC_SUBST([$1])dnl
++])
+diff -uprN clean/lrzsz-0.12.20/Makefile.am lrzsz-0.12.20/Makefile.am
+--- clean/lrzsz-0.12.20/Makefile.am 1998-12-30 11:19:40.000000000 +0000
++++ lrzsz-0.12.20/Makefile.am 2019-11-26 11:47:29.000000000 +0000
+@@ -1,5 +1,5 @@
+-SUBDIRS = lib intl src po man testsuite
+-EXTRA_DIST = check.lrzsz COMPATABILITY README.cvs README.isdn4linux \
++SUBDIRS = lib src po man testsuite
++EXTRA_DIST = config.rpath m4/ChangeLog check.lrzsz COMPATABILITY README.cvs README.isdn4linux \
+ README.gettext rpmrc buildrpm systype.in fastcheck.sh README.tests \
+ beos-runpiped.c fastcheck.beos
+ noinst_SCRIPTS=systype
+@@ -7,7 +7,6 @@ PR=@PACKAGE@-@VERSION@
+ CLEAN_FILES=fastcheck.done
+
+ dist-hook:
+- mkdir $(distdir)/debian
+ cp -fa $(srcdir)/debian/changelog $(distdir)/debian/
+ cp -fa $(srcdir)/debian/control $(distdir)/debian/
+ cp -fa $(srcdir)/debian/copyright $(distdir)/debian/
+@@ -83,3 +82,5 @@ cvs-dist:
+ rpm: $(PR).tar.gz Specfile
+ $(srcdir)/buildrpm $(srcdir)
+
++
++ACLOCAL_AMFLAGS = -I m4
+diff -uprN clean/lrzsz-0.12.20/Makefile.in lrzsz-0.12.20/Makefile.in
+--- clean/lrzsz-0.12.20/Makefile.in 1998-12-30 16:31:40.000000000 +0000
++++ lrzsz-0.12.20/Makefile.in 2019-11-26 11:47:49.000000000 +0000
+@@ -1,6 +1,8 @@
+-# Makefile.in generated automatically by automake 1.3 from Makefile.am
++# Makefile.in generated by automake 1.16.1 from Makefile.am.
++# @configure_input@
++
++# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -10,345 +12,817 @@
+ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+
++@SET_MAKE@
+
+-SHELL = /bin/sh
+-
+-srcdir = @srcdir@
+-top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+-prefix = @prefix@
+-exec_prefix = @exec_prefix@
+-
+-bindir = @bindir@
+-sbindir = @sbindir@
+-libexecdir = @libexecdir@
+-datadir = @datadir@
+-sysconfdir = @sysconfdir@
+-sharedstatedir = @sharedstatedir@
+-localstatedir = @localstatedir@
+-libdir = @libdir@
+-infodir = @infodir@
+-mandir = @mandir@
+-includedir = @includedir@
+-oldincludedir = /usr/include
+-
+-DISTDIR =
+-
++am__is_gnu_make = { \
++ if test -z '$(MAKELEVEL)'; then \
++ false; \
++ elif test -n '$(MAKE_HOST)'; then \
++ true; \
++ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
++ true; \
++ else \
++ false; \
++ fi; \
++}
++am__make_running_with_option = \
++ case $${target_option-} in \
++ ?) ;; \
++ *) echo "am__make_running_with_option: internal error: invalid" \
++ "target option '$${target_option-}' specified" >&2; \
++ exit 1;; \
++ esac; \
++ has_opt=no; \
++ sane_makeflags=$$MAKEFLAGS; \
++ if $(am__is_gnu_make); then \
++ sane_makeflags=$$MFLAGS; \
++ else \
++ case $$MAKEFLAGS in \
++ *\\[\ \ ]*) \
++ bs=\\; \
++ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
++ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
++ esac; \
++ fi; \
++ skip_next=no; \
++ strip_trailopt () \
++ { \
++ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
++ }; \
++ for flg in $$sane_makeflags; do \
++ test $$skip_next = yes && { skip_next=no; continue; }; \
++ case $$flg in \
++ *=*|--*) continue;; \
++ -*I) strip_trailopt 'I'; skip_next=yes;; \
++ -*I?*) strip_trailopt 'I';; \
++ -*O) strip_trailopt 'O'; skip_next=yes;; \
++ -*O?*) strip_trailopt 'O';; \
++ -*l) strip_trailopt 'l'; skip_next=yes;; \
++ -*l?*) strip_trailopt 'l';; \
++ -[dEDm]) skip_next=yes;; \
++ -[JT]) skip_next=yes;; \
++ esac; \
++ case $$flg in \
++ *$$target_option*) has_opt=yes; break;; \
++ esac; \
++ done; \
++ test $$has_opt = yes
++am__make_dryrun = (target_option=n; $(am__make_running_with_option))
++am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+ pkgdatadir = $(datadir)/@PACKAGE@
+-pkglibdir = $(libdir)/@PACKAGE@
+ pkgincludedir = $(includedir)/@PACKAGE@
+-
+-top_builddir = .
+-
+-ACLOCAL = @ACLOCAL@
+-AUTOCONF = @AUTOCONF@
+-AUTOMAKE = @AUTOMAKE@
+-AUTOHEADER = @AUTOHEADER@
+-
+-INSTALL = @INSTALL@
+-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+-INSTALL_DATA = @INSTALL_DATA@
+-INSTALL_SCRIPT = @INSTALL_SCRIPT@
+-transform = @program_transform_name@
+-
++pkglibdir = $(libdir)/@PACKAGE@
++pkglibexecdir = $(libexecdir)/@PACKAGE@
++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
++install_sh_DATA = $(install_sh) -c -m 644
++install_sh_PROGRAM = $(install_sh) -c
++install_sh_SCRIPT = $(install_sh) -c
++INSTALL_HEADER = $(INSTALL_DATA)
++transform = $(program_transform_name)
+ NORMAL_INSTALL = :
+ PRE_INSTALL = :
+ POST_INSTALL = :
+ NORMAL_UNINSTALL = :
+ PRE_UNINSTALL = :
+ POST_UNINSTALL = :
+-CATALOGS = @CATALOGS@
+-CATOBJEXT = @CATOBJEXT@
++build_triplet = @build@
++host_triplet = @host@
++subdir = .
++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
++am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
++ $(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
++ $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
++ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
++ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
++ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
++ $(top_srcdir)/configure.in
++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
++ $(ACLOCAL_M4)
++DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
++ $(am__configure_deps) $(am__DIST_COMMON)
++am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
++ configure.lineno config.status.lineno
++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
++CONFIG_HEADER = config.h
++CONFIG_CLEAN_FILES = debian/rules Specfile systype
++CONFIG_CLEAN_VPATH_FILES =
++SCRIPTS = $(noinst_SCRIPTS)
++AM_V_P = $(am__v_P_@AM_V@)
++am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
++am__v_P_0 = false
++am__v_P_1 = :
++AM_V_GEN = $(am__v_GEN_@AM_V@)
++am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
++am__v_GEN_0 = @echo " GEN " $@;
++am__v_GEN_1 =
++AM_V_at = $(am__v_at_@AM_V@)
++am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
++am__v_at_0 = @
++am__v_at_1 =
++SOURCES =
++DIST_SOURCES =
++RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
++ ctags-recursive dvi-recursive html-recursive info-recursive \
++ install-data-recursive install-dvi-recursive \
++ install-exec-recursive install-html-recursive \
++ install-info-recursive install-pdf-recursive \
++ install-ps-recursive install-recursive installcheck-recursive \
++ installdirs-recursive pdf-recursive ps-recursive \
++ tags-recursive uninstall-recursive
++am__can_run_installinfo = \
++ case $$AM_UPDATE_INFO_DIR in \
++ n|no|NO) false;; \
++ *) (install-info --version) >/dev/null 2>&1;; \
++ esac
++RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
++ distclean-recursive maintainer-clean-recursive
++am__recursive_targets = \
++ $(RECURSIVE_TARGETS) \
++ $(RECURSIVE_CLEAN_TARGETS) \
++ $(am__extra_recursive_targets)
++AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
++ cscope distdir distdir-am dist dist-all distcheck
++am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
++ $(LISP)config.h.in
++# Read a list of newline-separated strings from the standard input,
++# and print each of them once, without duplicates. Input order is
++# *not* preserved.
++am__uniquify_input = $(AWK) '\
++ BEGIN { nonempty = 0; } \
++ { items[$$0] = 1; nonempty = 1; } \
++ END { if (nonempty) { for (i in items) print i; }; } \
++'
++# Make sure the list of sources is unique. This is necessary because,
++# e.g., the same source file might be shared among _SOURCES variables
++# for different programs/libraries.
++am__define_uniq_tagged_files = \
++ list='$(am__tagged_files)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | $(am__uniquify_input)`
++ETAGS = etags
++CTAGS = ctags
++CSCOPE = cscope
++DIST_SUBDIRS = $(SUBDIRS)
++am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Specfile.in \
++ $(srcdir)/config.h.in $(srcdir)/systype.in \
++ $(top_srcdir)/debian/rules.in ABOUT-NLS AUTHORS COPYING \
++ ChangeLog INSTALL NEWS README THANKS TODO acconfig.h compile \
++ config.guess config.rpath config.sub depcomp install-sh \
++ missing mkinstalldirs
++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
++distdir = $(PACKAGE)-$(VERSION)
++top_distdir = $(distdir)
++am__remove_distdir = \
++ if test -d "$(distdir)"; then \
++ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
++ && rm -rf "$(distdir)" \
++ || { sleep 5 && rm -rf "$(distdir)"; }; \
++ else :; fi
++am__post_remove_distdir = $(am__remove_distdir)
++am__relativize = \
++ dir0=`pwd`; \
++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
++ sed_rest='s,^[^/]*/*,,'; \
++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
++ sed_butlast='s,/*[^/]*$$,,'; \
++ while test -n "$$dir1"; do \
++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
++ if test "$$first" != "."; then \
++ if test "$$first" = ".."; then \
++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
++ else \
++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
++ if test "$$first2" = "$$first"; then \
++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
++ else \
++ dir2="../$$dir2"; \
++ fi; \
++ dir0="$$dir0"/"$$first"; \
++ fi; \
++ fi; \
++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
++ done; \
++ reldir="$$dir2"
++DIST_ARCHIVES = $(distdir).tar.gz
++GZIP_ENV = --best
++DIST_TARGETS = dist-gzip
++distuninstallcheck_listfiles = find . -type f -print
++am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
++ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
++distcleancheck_listfiles = find . -type f -print
++ACLOCAL = @ACLOCAL@
++ALLOCA = @ALLOCA@
++AMTAR = @AMTAR@
++AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
++AUTOCONF = @AUTOCONF@
++AUTOHEADER = @AUTOHEADER@
++AUTOMAKE = @AUTOMAKE@
++AWK = @AWK@
+ CC = @CC@
++CCDEPMODE = @CCDEPMODE@
+ CFLAGS = @CFLAGS@
+ CPP = @CPP@
+-DATADIRNAME = @DATADIRNAME@
++CPPFLAGS = @CPPFLAGS@
++CYGPATH_W = @CYGPATH_W@
++DEFS = @DEFS@
++DEPDIR = @DEPDIR@
++ECHO_C = @ECHO_C@
++ECHO_N = @ECHO_N@
++ECHO_T = @ECHO_T@
++EGREP = @EGREP@
+ ENABLE_TIMESYNC = @ENABLE_TIMESYNC@
+-GENCAT = @GENCAT@
+-GMOFILES = @GMOFILES@
++EXEEXT = @EXEEXT@
++GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+ GMSGFMT = @GMSGFMT@
+-GT_NO = @GT_NO@
+-GT_YES = @GT_YES@
+-INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
+-INSTOBJEXT = @INSTOBJEXT@
+-INTLDEPS = @INTLDEPS@
++GMSGFMT_015 = @GMSGFMT_015@
++GREP = @GREP@
++INSTALL = @INSTALL@
++INSTALL_DATA = @INSTALL_DATA@
++INSTALL_PROGRAM = @INSTALL_PROGRAM@
++INSTALL_SCRIPT = @INSTALL_SCRIPT@
++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+ INTLLIBS = @INTLLIBS@
+-INTLOBJS = @INTLOBJS@
++INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+ LDFLAGS = @LDFLAGS@
++LIBICONV = @LIBICONV@
++LIBINTL = @LIBINTL@
+ LIBOBJS = @LIBOBJS@
+ LIBS = @LIBS@
++LTLIBICONV = @LTLIBICONV@
++LTLIBINTL = @LTLIBINTL@
++LTLIBOBJS = @LTLIBOBJS@
+ MAKEINFO = @MAKEINFO@
+-MKINSTALLDIRS = @MKINSTALLDIRS@
++MKDIR_P = @MKDIR_P@
+ MSGFMT = @MSGFMT@
++MSGMERGE = @MSGMERGE@
++MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
++OBJEXT = @OBJEXT@
+ PACKAGE = @PACKAGE@
++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
++PACKAGE_NAME = @PACKAGE_NAME@
++PACKAGE_STRING = @PACKAGE_STRING@
++PACKAGE_TARNAME = @PACKAGE_TARNAME@
++PACKAGE_URL = @PACKAGE_URL@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
+-POFILES = @POFILES@
++PATH_SEPARATOR = @PATH_SEPARATOR@
+ POSUB = @POSUB@
+ RANLIB = @RANLIB@
+-U = @U@
+-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
++SED = @SED@
++SET_MAKE = @SET_MAKE@
++SHELL = @SHELL@
++STRIP = @STRIP@
+ USE_NLS = @USE_NLS@
+ VERSION = @VERSION@
+-l = @l@
+-
+-SUBDIRS = lib intl src po man testsuite
+-EXTRA_DIST = check.lrzsz COMPATABILITY README.cvs README.isdn4linux \
++XGETTEXT = @XGETTEXT@
++XGETTEXT_015 = @XGETTEXT_015@
++XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
++abs_builddir = @abs_builddir@
++abs_srcdir = @abs_srcdir@
++abs_top_builddir = @abs_top_builddir@
++abs_top_srcdir = @abs_top_srcdir@
++ac_ct_CC = @ac_ct_CC@
++am__include = @am__include@
++am__leading_dot = @am__leading_dot@
++am__quote = @am__quote@
++am__tar = @am__tar@
++am__untar = @am__untar@
++bindir = @bindir@
++build = @build@
++build_alias = @build_alias@
++build_cpu = @build_cpu@
++build_os = @build_os@
++build_vendor = @build_vendor@
++builddir = @builddir@
++datadir = @datadir@
++datarootdir = @datarootdir@
++docdir = @docdir@
++dvidir = @dvidir@
++exec_prefix = @exec_prefix@
++host = @host@
++host_alias = @host_alias@
++host_cpu = @host_cpu@
++host_os = @host_os@
++host_vendor = @host_vendor@
++htmldir = @htmldir@
++includedir = @includedir@
++infodir = @infodir@
++install_sh = @install_sh@
++libdir = @libdir@
++libexecdir = @libexecdir@
++localedir = @localedir@
++localstatedir = @localstatedir@
++mandir = @mandir@
++mkdir_p = @mkdir_p@
++oldincludedir = @oldincludedir@
++pdfdir = @pdfdir@
++prefix = @prefix@
++program_transform_name = @program_transform_name@
++psdir = @psdir@
++sbindir = @sbindir@
++sharedstatedir = @sharedstatedir@
++srcdir = @srcdir@
++sysconfdir = @sysconfdir@
++target_alias = @target_alias@
++top_build_prefix = @top_build_prefix@
++top_builddir = @top_builddir@
++top_srcdir = @top_srcdir@
++SUBDIRS = lib src po man testsuite
++EXTRA_DIST = config.rpath m4/ChangeLog check.lrzsz COMPATABILITY README.cvs README.isdn4linux \
+ README.gettext rpmrc buildrpm systype.in fastcheck.sh README.tests \
+ beos-runpiped.c fastcheck.beos
+-noinst_SCRIPTS=systype
+-PR=@PACKAGE@-@VERSION@
+-CLEAN_FILES=fastcheck.done
+-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+-CONFIG_HEADER = config.h
+-CONFIG_CLEAN_FILES = Specfile systype
+-SCRIPTS = $(noinst_SCRIPTS)
+-
+-DIST_COMMON = README ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL \
+-Makefile.am Makefile.in NEWS Specfile.in THANKS TODO acconfig.h \
+-acinclude.m4 aclocal.m4 config.guess config.h.in config.sub configure \
+-configure.in install-sh missing mkinstalldirs stamp-h.in systype.in
+
+-
+-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+-
+-TAR = tar
+-GZIP = --best
+-all: all-recursive-am all-am
++noinst_SCRIPTS = systype
++PR = @PACKAGE@-@VERSION@
++CLEAN_FILES = fastcheck.done
++ACLOCAL_AMFLAGS = -I m4
++all: config.h
++ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+ .SUFFIXES:
+-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
+-
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+- cd $(top_builddir) \
+- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+-
+-$(ACLOCAL_M4): configure.in acinclude.m4
+- cd $(srcdir) && $(ACLOCAL)
+-
+-config.status: $(srcdir)/configure
+- $(SHELL) ./config.status --recheck
+-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+- cd $(srcdir) && $(AUTOCONF)
+-
+-config.h: stamp-h
++am--refresh: Makefile
+ @:
+-stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
+- cd $(top_builddir) \
+- && CONFIG_FILES= CONFIG_HEADERS=config.h \
+- $(SHELL) ./config.status
+- @echo timestamp > stamp-h
+-$(srcdir)/config.h.in: $(srcdir)/stamp-h.in
+-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
+- cd $(top_srcdir) && $(AUTOHEADER)
+- @echo timestamp > $(srcdir)/stamp-h.in
++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
++ @for dep in $?; do \
++ case '$(am__configure_deps)' in \
++ *$$dep*) \
++ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
++ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
++ && exit 0; \
++ exit 1;; \
++ esac; \
++ done; \
++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
++ $(am__cd) $(top_srcdir) && \
++ $(AUTOMAKE) --gnu Makefile
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++ @case '$?' in \
++ *config.status*) \
++ echo ' $(SHELL) ./config.status'; \
++ $(SHELL) ./config.status;; \
++ *) \
++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
++ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
++ esac;
+
+-mostlyclean-hdr:
++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
++ $(SHELL) ./config.status --recheck
+
+-clean-hdr:
++$(top_srcdir)/configure: $(am__configure_deps)
++ $(am__cd) $(srcdir) && $(AUTOCONF)
++$(ACLOCAL_M4): $(am__aclocal_m4_deps)
++ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
++$(am__aclocal_m4_deps):
++
++config.h: stamp-h1
++ @test -f $@ || rm -f stamp-h1
++ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
++
++stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
++ @rm -f stamp-h1
++ cd $(top_builddir) && $(SHELL) ./config.status config.h
++$(srcdir)/config.h.in: $(am__configure_deps) $(top_srcdir)/acconfig.h
++ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
++ rm -f stamp-h1
++ touch $@
+
+ distclean-hdr:
+- -rm -f config.h
+-
+-maintainer-clean-hdr:
+-Specfile: $(top_builddir)/config.status Specfile.in
+- cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status
+-systype: $(top_builddir)/config.status systype.in
+- cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status
++ -rm -f config.h stamp-h1
++debian/rules: $(top_builddir)/config.status $(top_srcdir)/debian/rules.in
++ cd $(top_builddir) && $(SHELL) ./config.status $@
++Specfile: $(top_builddir)/config.status $(srcdir)/Specfile.in
++ cd $(top_builddir) && $(SHELL) ./config.status $@
++systype: $(top_builddir)/config.status $(srcdir)/systype.in
++ cd $(top_builddir) && $(SHELL) ./config.status $@
+
+ # This directory's subdirectories are mostly independent; you can cd
+-# into them and run `make' without going through this Makefile.
+-# To change the values of `make' variables: instead of editing Makefiles,
+-# (1) if the variable is set in `config.status', edit `config.status'
+-# (which will cause the Makefiles to be regenerated when you run `make');
+-# (2) otherwise, pass the desired values on the `make' command line.
+-
+-@SET_MAKE@
+-
+-all-recursive install-data-recursive install-exec-recursive \
+-installdirs-recursive install-recursive uninstall-recursive \
+-check-recursive installcheck-recursive info-recursive dvi-recursive:
+- @set fnord $(MAKEFLAGS); amf=$$2; \
+- list='$(SUBDIRS)'; for subdir in $$list; do \
+- target=`echo $@ | sed s/-recursive//`; \
++# into them and run 'make' without going through this Makefile.
++# To change the values of 'make' variables: instead of editing Makefiles,
++# (1) if the variable is set in 'config.status', edit 'config.status'
++# (which will cause the Makefiles to be regenerated when you run 'make');
++# (2) otherwise, pass the desired values on the 'make' command line.
++$(am__recursive_targets):
++ @fail=; \
++ if $(am__make_keepgoing); then \
++ failcom='fail=yes'; \
++ else \
++ failcom='exit 1'; \
++ fi; \
++ dot_seen=no; \
++ target=`echo $@ | sed s/-recursive//`; \
++ case "$@" in \
++ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
++ *) list='$(SUBDIRS)' ;; \
++ esac; \
++ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+- (cd $$subdir && $(MAKE) $$target) \
+- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+- done && test -z "$$fail"
+-
+-mostlyclean-recursive clean-recursive distclean-recursive \
+-maintainer-clean-recursive:
+- @set fnord $(MAKEFLAGS); amf=$$2; \
+- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+- rev="$$subdir $$rev"; \
++ if test "$$subdir" = "."; then \
++ dot_seen=yes; \
++ local_target="$$target-am"; \
++ else \
++ local_target="$$target"; \
++ fi; \
++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
++ || eval $$failcom; \
+ done; \
+- for subdir in $$rev; do \
+- target=`echo $@ | sed s/-recursive//`; \
+- echo "Making $$target in $$subdir"; \
+- (cd $$subdir && $(MAKE) $$target) \
+- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+- done && test -z "$$fail"
+-tags-recursive:
+- list='$(SUBDIRS)'; for subdir in $$list; do \
+- (cd $$subdir && $(MAKE) tags); \
+- done
+-
+-tags: TAGS
++ if test "$$dot_seen" = "no"; then \
++ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
++ fi; test -z "$$fail"
++
++ID: $(am__tagged_files)
++ $(am__define_uniq_tagged_files); mkid -fID $$unique
++tags: tags-recursive
++TAGS: tags
+
+-ID: $(HEADERS) $(SOURCES) $(LISP)
+- here=`pwd` && cd $(srcdir) \
+- && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP)
+-
+-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
+- tags=; \
++tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
++ set x; \
+ here=`pwd`; \
++ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
++ include_option=--etags-include; \
++ empty_fix=.; \
++ else \
++ include_option=--include; \
++ empty_fix=; \
++ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
++ if test "$$subdir" = .; then :; else \
++ test ! -f $$subdir/TAGS || \
++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
++ fi; \
+ done; \
+- list='$(SOURCES) $(HEADERS)'; \
+- unique=`for i in $$list; do echo $$i; done | \
+- awk ' { files[$$0] = 1; } \
+- END { for (i in files) print i; }'`; \
+- test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
+-
+-mostlyclean-tags:
+-
+-clean-tags:
++ $(am__define_uniq_tagged_files); \
++ shift; \
++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
++ test -n "$$unique" || unique=$$empty_fix; \
++ if test $$# -gt 0; then \
++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++ "$$@" $$unique; \
++ else \
++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++ $$unique; \
++ fi; \
++ fi
++ctags: ctags-recursive
++
++CTAGS: ctags
++ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
++ $(am__define_uniq_tagged_files); \
++ test -z "$(CTAGS_ARGS)$$unique" \
++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
++ $$unique
++
++GTAGS:
++ here=`$(am__cd) $(top_builddir) && pwd` \
++ && $(am__cd) $(top_srcdir) \
++ && gtags -i $(GTAGS_ARGS) "$$here"
++cscope: cscope.files
++ test ! -s cscope.files \
++ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
++clean-cscope:
++ -rm -f cscope.files
++cscope.files: clean-cscope cscopelist
++cscopelist: cscopelist-recursive
++
++cscopelist-am: $(am__tagged_files)
++ list='$(am__tagged_files)'; \
++ case "$(srcdir)" in \
++ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
++ *) sdir=$(subdir)/$(srcdir) ;; \
++ esac; \
++ for i in $$list; do \
++ if test -f "$$i"; then \
++ echo "$(subdir)/$$i"; \
++ else \
++ echo "$$sdir/$$i"; \
++ fi; \
++ done >> $(top_builddir)/cscope.files
+
+ distclean-tags:
+- -rm -f TAGS ID
++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
++ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+-maintainer-clean-tags:
++distdir: $(BUILT_SOURCES)
++ $(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+-distdir = $(PACKAGE)-$(VERSION)
+-top_distdir = $(distdir)
++distdir-am: $(DISTFILES)
++ $(am__remove_distdir)
++ test -d "$(distdir)" || mkdir "$(distdir)"
++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ list='$(DISTFILES)'; \
++ dist_files=`for file in $$list; do echo $$file; done | \
++ sed -e "s|^$$srcdirstrip/||;t" \
++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
++ case $$dist_files in \
++ */*) $(MKDIR_P) `echo "$$dist_files" | \
++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
++ sort -u` ;; \
++ esac; \
++ for file in $$dist_files; do \
++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
++ if test -d $$d/$$file; then \
++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
++ if test -d "$(distdir)/$$file"; then \
++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++ fi; \
++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++ fi; \
++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
++ else \
++ test -f "$(distdir)/$$file" \
++ || cp -p $$d/$$file "$(distdir)/$$file" \
++ || exit 1; \
++ fi; \
++ done
++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
++ if test "$$subdir" = .; then :; else \
++ $(am__make_dryrun) \
++ || test -d "$(distdir)/$$subdir" \
++ || $(MKDIR_P) "$(distdir)/$$subdir" \
++ || exit 1; \
++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
++ $(am__relativize); \
++ new_distdir=$$reldir; \
++ dir1=$$subdir; dir2="$(top_distdir)"; \
++ $(am__relativize); \
++ new_top_distdir=$$reldir; \
++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
++ ($(am__cd) $$subdir && \
++ $(MAKE) $(AM_MAKEFLAGS) \
++ top_distdir="$$new_top_distdir" \
++ distdir="$$new_distdir" \
++ am__remove_distdir=: \
++ am__skip_length_check=: \
++ am__skip_mode_fix=: \
++ distdir) \
++ || exit 1; \
++ fi; \
++ done
++ $(MAKE) $(AM_MAKEFLAGS) \
++ top_distdir="$(top_distdir)" distdir="$(distdir)" \
++ dist-hook
++ -test -n "$(am__skip_mode_fix)" \
++ || find "$(distdir)" -type d ! -perm -755 \
++ -exec chmod u+rwx,go+rx {} \; -o \
++ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
++ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
++ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
++ || chmod -R a+r "$(distdir)"
++dist-gzip: distdir
++ tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
++ $(am__post_remove_distdir)
++
++dist-bzip2: distdir
++ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
++ $(am__post_remove_distdir)
++
++dist-lzip: distdir
++ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
++ $(am__post_remove_distdir)
++
++dist-xz: distdir
++ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
++ $(am__post_remove_distdir)
++
++dist-tarZ: distdir
++ @echo WARNING: "Support for distribution archives compressed with" \
++ "legacy program 'compress' is deprecated." >&2
++ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
++ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
++ $(am__post_remove_distdir)
++
++dist-shar: distdir
++ @echo WARNING: "Support for shar distribution archives is" \
++ "deprecated." >&2
++ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
++ shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
++ $(am__post_remove_distdir)
++
++dist-zip: distdir
++ -rm -f $(distdir).zip
++ zip -rq $(distdir).zip $(distdir)
++ $(am__post_remove_distdir)
++
++dist dist-all:
++ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
++ $(am__post_remove_distdir)
+
+ # This target untars the dist file and tries a VPATH configuration. Then
+ # it guarantees that the distribution is self-contained by making another
+ # tarfile.
+ distcheck: dist
+- -rm -rf $(distdir)
+- GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
+- mkdir $(distdir)/=build
+- mkdir $(distdir)/=inst
+- dc_install_base=`cd $(distdir)/=inst && pwd`; \
+- cd $(distdir)/=build \
+- && ../configure --with-included-gettext --srcdir=.. --prefix=$$dc_install_base \
+- && $(MAKE) \
+- && $(MAKE) dvi \
+- && $(MAKE) check \
+- && $(MAKE) install \
+- && $(MAKE) installcheck \
+- && $(MAKE) dist
+- -rm -rf $(distdir)
+- @echo "========================"; \
+- echo "$(distdir).tar.gz is ready for distribution"; \
+- echo "========================"
+-dist: distdir
+- -chmod -R a+r $(distdir)
+- GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+- -rm -rf $(distdir)
+-dist-all: distdir
+- -chmod -R a+r $(distdir)
+- GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+- -rm -rf $(distdir)
+-distdir: $(DISTFILES)
+- -rm -rf $(distdir)
+- mkdir $(distdir)
+- -chmod 777 $(distdir)
+- @for file in $(DISTFILES); do \
+- d=$(srcdir); \
+- test -f $(distdir)/$$file \
+- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+- || cp -p $$d/$$file $(distdir)/$$file; \
+- done
+- for subdir in $(SUBDIRS); do \
+- test -d $(distdir)/$$subdir \
+- || mkdir $(distdir)/$$subdir \
+- || exit 1; \
+- chmod 777 $(distdir)/$$subdir; \
+- (cd $$subdir && $(MAKE) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+- || exit 1; \
+- done
+- $(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
+-info: info-recursive
+-dvi: dvi-recursive
+-check: all-am
+- $(MAKE) check-recursive
+-installcheck: installcheck-recursive
+-all-recursive-am: config.h
+- $(MAKE) all-recursive
+-
++ case '$(DIST_ARCHIVES)' in \
++ *.tar.gz*) \
++ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
++ *.tar.bz2*) \
++ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
++ *.tar.lz*) \
++ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
++ *.tar.xz*) \
++ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
++ *.tar.Z*) \
++ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
++ *.shar.gz*) \
++ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
++ *.zip*) \
++ unzip $(distdir).zip ;;\
++ esac
++ chmod -R a-w $(distdir)
++ chmod u+w $(distdir)
++ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
++ chmod a-w $(distdir)
++ test -d $(distdir)/_build || exit 0; \
++ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
++ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
++ && am__cwd=`pwd` \
++ && $(am__cd) $(distdir)/_build/sub \
++ && ../../configure \
++ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
++ $(DISTCHECK_CONFIGURE_FLAGS) \
++ --srcdir=../.. --prefix="$$dc_install_base" \
++ && $(MAKE) $(AM_MAKEFLAGS) \
++ && $(MAKE) $(AM_MAKEFLAGS) dvi \
++ && $(MAKE) $(AM_MAKEFLAGS) check \
++ && $(MAKE) $(AM_MAKEFLAGS) install \
++ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
++ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
++ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
++ distuninstallcheck \
++ && chmod -R a-w "$$dc_install_base" \
++ && ({ \
++ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
++ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
++ } || { rm -rf "$$dc_destdir"; exit 1; }) \
++ && rm -rf "$$dc_destdir" \
++ && $(MAKE) $(AM_MAKEFLAGS) dist \
++ && rm -rf $(DIST_ARCHIVES) \
++ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
++ && cd "$$am__cwd" \
++ || exit 1
++ $(am__post_remove_distdir)
++ @(echo "$(distdir) archives ready for distribution: "; \
++ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
++ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
++distuninstallcheck:
++ @test -n '$(distuninstallcheck_dir)' || { \
++ echo 'ERROR: trying to run $@ with an empty' \
++ '$$(distuninstallcheck_dir)' >&2; \
++ exit 1; \
++ }; \
++ $(am__cd) '$(distuninstallcheck_dir)' || { \
++ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
++ exit 1; \
++ }; \
++ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
++ || { echo "ERROR: files left after uninstall:" ; \
++ if test -n "$(DESTDIR)"; then \
++ echo " (check DESTDIR support)"; \
++ fi ; \
++ $(distuninstallcheck_listfiles) ; \
++ exit 1; } >&2
++distcleancheck: distclean
++ @if test '$(srcdir)' = . ; then \
++ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
++ exit 1 ; \
++ fi
++ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
++ || { echo "ERROR: files left in build directory after distclean:" ; \
++ $(distcleancheck_listfiles) ; \
++ exit 1; } >&2
++check-am: all-am
++check: check-recursive
+ all-am: Makefile $(SCRIPTS) config.h
+-
++installdirs: installdirs-recursive
++installdirs-am:
++install: install-recursive
+ install-exec: install-exec-recursive
+- @$(NORMAL_INSTALL)
+-
+ install-data: install-data-recursive
+- @$(NORMAL_INSTALL)
+-
+-install: install-recursive
+- @:
+-
+ uninstall: uninstall-recursive
+
+-install-strip:
+- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+-installdirs: installdirs-recursive
+-
++install-am: all-am
++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
++installcheck: installcheck-recursive
++install-strip:
++ if test -z '$(STRIP)'; then \
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ install; \
++ else \
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
++ fi
+ mostlyclean-generic:
+- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+ clean-generic:
+- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+ distclean-generic:
+- -rm -f Makefile $(DISTCLEANFILES)
+- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+ maintainer-clean-generic:
+- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+-mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic
++ @echo "This command is intended for maintainers to use"
++ @echo "it deletes files that may require special tools to rebuild."
++clean: clean-recursive
+
+-clean-am: clean-hdr clean-tags clean-generic mostlyclean-am
++clean-am: clean-generic mostlyclean-am
+
+-distclean-am: distclean-hdr distclean-tags distclean-generic clean-am
++distclean: distclean-recursive
++ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
++ -rm -f Makefile
++distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+
+-maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \
+- maintainer-clean-generic distclean-am
++dvi: dvi-recursive
+
+-mostlyclean: mostlyclean-recursive mostlyclean-am
++dvi-am:
+
+-clean: clean-recursive clean-am
++html: html-recursive
+
+-distclean: distclean-recursive distclean-am
+- -rm -f config.status
++html-am:
+
+-maintainer-clean: maintainer-clean-recursive maintainer-clean-am
+- @echo "This command is intended for maintainers to use;"
+- @echo "it deletes files that may require special tools to rebuild."
+- -rm -f config.status
++info: info-recursive
++
++info-am:
++
++install-data-am:
++
++install-dvi: install-dvi-recursive
++
++install-dvi-am:
++
++install-exec-am:
++
++install-html: install-html-recursive
++
++install-html-am:
++
++install-info: install-info-recursive
++
++install-info-am:
++
++install-man:
++
++install-pdf: install-pdf-recursive
++
++install-pdf-am:
++
++install-ps: install-ps-recursive
++
++install-ps-am:
++
++installcheck-am:
++
++maintainer-clean: maintainer-clean-recursive
++ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
++ -rm -rf $(top_srcdir)/autom4te.cache
++ -rm -f Makefile
++maintainer-clean-am: distclean-am maintainer-clean-generic
++
++mostlyclean: mostlyclean-recursive
++
++mostlyclean-am: mostlyclean-generic
++
++pdf: pdf-recursive
++
++pdf-am:
++
++ps: ps-recursive
++
++ps-am:
++
++uninstall-am:
++
++.MAKE: $(am__recursive_targets) all install-am install-strip
++
++.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
++ am--refresh check check-am clean clean-cscope clean-generic \
++ cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
++ dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
++ dist-zip distcheck distclean distclean-generic distclean-hdr \
++ distclean-tags distcleancheck distdir distuninstallcheck dvi \
++ dvi-am html html-am info info-am install install-am \
++ install-data install-data-am install-dvi install-dvi-am \
++ install-exec install-exec-am install-html install-html-am \
++ install-info install-info-am install-man install-pdf \
++ install-pdf-am install-ps install-ps-am install-strip \
++ installcheck installcheck-am installdirs installdirs-am \
++ maintainer-clean maintainer-clean-generic mostlyclean \
++ mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
++ uninstall-am
+
+-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
+-install-data-recursive uninstall-data-recursive install-exec-recursive \
+-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
+-all-recursive check-recursive installcheck-recursive info-recursive \
+-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
+-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info dvi \
+-installcheck all-recursive-am all-am install-exec install-data install \
+-uninstall all installdirs mostlyclean-generic distclean-generic \
+-clean-generic maintainer-clean-generic clean mostlyclean distclean \
+-maintainer-clean
++.PRECIOUS: Makefile
+
+
+ dist-hook:
+- mkdir $(distdir)/debian
+ cp -fa $(srcdir)/debian/changelog $(distdir)/debian/
+ cp -fa $(srcdir)/debian/control $(distdir)/debian/
+ cp -fa $(srcdir)/debian/copyright $(distdir)/debian/
+diff -uprN clean/lrzsz-0.12.20/man/Makefile.in lrzsz-0.12.20/man/Makefile.in
+--- clean/lrzsz-0.12.20/man/Makefile.in 1998-12-30 16:31:48.000000000 +0000
++++ lrzsz-0.12.20/man/Makefile.in 2019-11-26 11:37:46.000000000 +0000
+@@ -1,6 +1,8 @@
+-# Makefile.in generated automatically by automake 1.3 from Makefile.am
++# Makefile.in generated by automake 1.16.1 from Makefile.am.
++# @configure_input@
++
++# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -10,219 +12,503 @@
+ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+
+-
+-SHELL = /bin/sh
+-
+-srcdir = @srcdir@
+-top_srcdir = @top_srcdir@
++@SET_MAKE@
+ VPATH = @srcdir@
+-prefix = @prefix@
+-exec_prefix = @exec_prefix@
+-
+-bindir = @bindir@
+-sbindir = @sbindir@
+-libexecdir = @libexecdir@
+-datadir = @datadir@
+-sysconfdir = @sysconfdir@
+-sharedstatedir = @sharedstatedir@
+-localstatedir = @localstatedir@
+-libdir = @libdir@
+-infodir = @infodir@
+-mandir = @mandir@
+-includedir = @includedir@
+-oldincludedir = /usr/include
+-
+-DISTDIR =
+-
++am__is_gnu_make = { \
++ if test -z '$(MAKELEVEL)'; then \
++ false; \
++ elif test -n '$(MAKE_HOST)'; then \
++ true; \
++ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
++ true; \
++ else \
++ false; \
++ fi; \
++}
++am__make_running_with_option = \
++ case $${target_option-} in \
++ ?) ;; \
++ *) echo "am__make_running_with_option: internal error: invalid" \
++ "target option '$${target_option-}' specified" >&2; \
++ exit 1;; \
++ esac; \
++ has_opt=no; \
++ sane_makeflags=$$MAKEFLAGS; \
++ if $(am__is_gnu_make); then \
++ sane_makeflags=$$MFLAGS; \
++ else \
++ case $$MAKEFLAGS in \
++ *\\[\ \ ]*) \
++ bs=\\; \
++ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
++ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
++ esac; \
++ fi; \
++ skip_next=no; \
++ strip_trailopt () \
++ { \
++ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
++ }; \
++ for flg in $$sane_makeflags; do \
++ test $$skip_next = yes && { skip_next=no; continue; }; \
++ case $$flg in \
++ *=*|--*) continue;; \
++ -*I) strip_trailopt 'I'; skip_next=yes;; \
++ -*I?*) strip_trailopt 'I';; \
++ -*O) strip_trailopt 'O'; skip_next=yes;; \
++ -*O?*) strip_trailopt 'O';; \
++ -*l) strip_trailopt 'l'; skip_next=yes;; \
++ -*l?*) strip_trailopt 'l';; \
++ -[dEDm]) skip_next=yes;; \
++ -[JT]) skip_next=yes;; \
++ esac; \
++ case $$flg in \
++ *$$target_option*) has_opt=yes; break;; \
++ esac; \
++ done; \
++ test $$has_opt = yes
++am__make_dryrun = (target_option=n; $(am__make_running_with_option))
++am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+ pkgdatadir = $(datadir)/@PACKAGE@
+-pkglibdir = $(libdir)/@PACKAGE@
+ pkgincludedir = $(includedir)/@PACKAGE@
+-
+-top_builddir = ..
+-
+-ACLOCAL = @ACLOCAL@
+-AUTOCONF = @AUTOCONF@
+-AUTOMAKE = @AUTOMAKE@
+-AUTOHEADER = @AUTOHEADER@
+-
+-INSTALL = @INSTALL@
+-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+-INSTALL_DATA = @INSTALL_DATA@
+-INSTALL_SCRIPT = @INSTALL_SCRIPT@
+-transform = @program_transform_name@
+-
++pkglibdir = $(libdir)/@PACKAGE@
++pkglibexecdir = $(libexecdir)/@PACKAGE@
++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
++install_sh_DATA = $(install_sh) -c -m 644
++install_sh_PROGRAM = $(install_sh) -c
++install_sh_SCRIPT = $(install_sh) -c
++INSTALL_HEADER = $(INSTALL_DATA)
++transform = $(program_transform_name)
+ NORMAL_INSTALL = :
+ PRE_INSTALL = :
+ POST_INSTALL = :
+ NORMAL_UNINSTALL = :
+ PRE_UNINSTALL = :
+ POST_UNINSTALL = :
+-CATALOGS = @CATALOGS@
+-CATOBJEXT = @CATOBJEXT@
++build_triplet = @build@
++host_triplet = @host@
++subdir = man
++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
++am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
++ $(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
++ $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
++ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
++ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
++ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
++ $(top_srcdir)/configure.in
++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
++ $(ACLOCAL_M4)
++DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
++CONFIG_HEADER = $(top_builddir)/config.h
++CONFIG_CLEAN_FILES =
++CONFIG_CLEAN_VPATH_FILES =
++AM_V_P = $(am__v_P_@AM_V@)
++am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
++am__v_P_0 = false
++am__v_P_1 = :
++AM_V_GEN = $(am__v_GEN_@AM_V@)
++am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
++am__v_GEN_0 = @echo " GEN " $@;
++am__v_GEN_1 =
++AM_V_at = $(am__v_at_@AM_V@)
++am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
++am__v_at_0 = @
++am__v_at_1 =
++SOURCES =
++DIST_SOURCES =
++am__can_run_installinfo = \
++ case $$AM_UPDATE_INFO_DIR in \
++ n|no|NO) false;; \
++ *) (install-info --version) >/dev/null 2>&1;; \
++ esac
++am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
++am__vpath_adj = case $$p in \
++ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
++ *) f=$$p;; \
++ esac;
++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
++am__install_max = 40
++am__nobase_strip_setup = \
++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
++am__nobase_strip = \
++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
++am__nobase_list = $(am__nobase_strip_setup); \
++ for p in $$list; do echo "$$p $$p"; done | \
++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
++ if (++n[$$2] == $(am__install_max)) \
++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
++ END { for (dir in files) print dir, files[dir] }'
++am__base_list = \
++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
++am__uninstall_files_from_dir = { \
++ test -z "$$files" \
++ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
++ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
++ $(am__cd) "$$dir" && rm -f $$files; }; \
++ }
++man1dir = $(mandir)/man1
++am__installdirs = "$(DESTDIR)$(man1dir)"
++NROFF = nroff
++MANS = $(man_MANS)
++am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
++am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/mkinstalldirs
++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
++ACLOCAL = @ACLOCAL@
++ALLOCA = @ALLOCA@
++AMTAR = @AMTAR@
++AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
++AUTOCONF = @AUTOCONF@
++AUTOHEADER = @AUTOHEADER@
++AUTOMAKE = @AUTOMAKE@
++AWK = @AWK@
+ CC = @CC@
++CCDEPMODE = @CCDEPMODE@
+ CFLAGS = @CFLAGS@
+ CPP = @CPP@
+-DATADIRNAME = @DATADIRNAME@
++CPPFLAGS = @CPPFLAGS@
++CYGPATH_W = @CYGPATH_W@
++DEFS = @DEFS@
++DEPDIR = @DEPDIR@
++ECHO_C = @ECHO_C@
++ECHO_N = @ECHO_N@
++ECHO_T = @ECHO_T@
++EGREP = @EGREP@
+ ENABLE_TIMESYNC = @ENABLE_TIMESYNC@
+-GENCAT = @GENCAT@
+-GMOFILES = @GMOFILES@
++EXEEXT = @EXEEXT@
++GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+ GMSGFMT = @GMSGFMT@
+-GT_NO = @GT_NO@
+-GT_YES = @GT_YES@
+-INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
+-INSTOBJEXT = @INSTOBJEXT@
+-INTLDEPS = @INTLDEPS@
++GMSGFMT_015 = @GMSGFMT_015@
++GREP = @GREP@
++INSTALL = @INSTALL@
++INSTALL_DATA = @INSTALL_DATA@
++INSTALL_PROGRAM = @INSTALL_PROGRAM@
++INSTALL_SCRIPT = @INSTALL_SCRIPT@
++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+ INTLLIBS = @INTLLIBS@
+-INTLOBJS = @INTLOBJS@
++INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+ LDFLAGS = @LDFLAGS@
++LIBICONV = @LIBICONV@
++LIBINTL = @LIBINTL@
+ LIBOBJS = @LIBOBJS@
+ LIBS = @LIBS@
++LTLIBICONV = @LTLIBICONV@
++LTLIBINTL = @LTLIBINTL@
++LTLIBOBJS = @LTLIBOBJS@
+ MAKEINFO = @MAKEINFO@
+-MKINSTALLDIRS = @MKINSTALLDIRS@
++MKDIR_P = @MKDIR_P@
+ MSGFMT = @MSGFMT@
++MSGMERGE = @MSGMERGE@
++MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
++OBJEXT = @OBJEXT@
+ PACKAGE = @PACKAGE@
++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
++PACKAGE_NAME = @PACKAGE_NAME@
++PACKAGE_STRING = @PACKAGE_STRING@
++PACKAGE_TARNAME = @PACKAGE_TARNAME@
++PACKAGE_URL = @PACKAGE_URL@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
+-POFILES = @POFILES@
++PATH_SEPARATOR = @PATH_SEPARATOR@
+ POSUB = @POSUB@
+ RANLIB = @RANLIB@
+-U = @U@
+-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
++SED = @SED@
++SET_MAKE = @SET_MAKE@
++SHELL = @SHELL@
++STRIP = @STRIP@
+ USE_NLS = @USE_NLS@
+ VERSION = @VERSION@
+-l = @l@
+-
++XGETTEXT = @XGETTEXT@
++XGETTEXT_015 = @XGETTEXT_015@
++XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
++abs_builddir = @abs_builddir@
++abs_srcdir = @abs_srcdir@
++abs_top_builddir = @abs_top_builddir@
++abs_top_srcdir = @abs_top_srcdir@
++ac_ct_CC = @ac_ct_CC@
++am__include = @am__include@
++am__leading_dot = @am__leading_dot@
++am__quote = @am__quote@
++am__tar = @am__tar@
++am__untar = @am__untar@
++bindir = @bindir@
++build = @build@
++build_alias = @build_alias@
++build_cpu = @build_cpu@
++build_os = @build_os@
++build_vendor = @build_vendor@
++builddir = @builddir@
++datadir = @datadir@
++datarootdir = @datarootdir@
++docdir = @docdir@
++dvidir = @dvidir@
++exec_prefix = @exec_prefix@
++host = @host@
++host_alias = @host_alias@
++host_cpu = @host_cpu@
++host_os = @host_os@
++host_vendor = @host_vendor@
++htmldir = @htmldir@
++includedir = @includedir@
++infodir = @infodir@
++install_sh = @install_sh@
++libdir = @libdir@
++libexecdir = @libexecdir@
++localedir = @localedir@
++localstatedir = @localstatedir@
++mandir = @mandir@
++mkdir_p = @mkdir_p@
++oldincludedir = @oldincludedir@
++pdfdir = @pdfdir@
++prefix = @prefix@
++program_transform_name = @program_transform_name@
++psdir = @psdir@
++sbindir = @sbindir@
++sharedstatedir = @sharedstatedir@
++srcdir = @srcdir@
++sysconfdir = @sysconfdir@
++target_alias = @target_alias@
++top_build_prefix = @top_build_prefix@
++top_builddir = @top_builddir@
++top_srcdir = @top_srcdir@
+ man_MANS = lrz.1 lsz.1
+ EXTRA_DIST = lrz.1 lsz.1
+-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+-CONFIG_HEADER = ../config.h
+-CONFIG_CLEAN_FILES =
+-man1dir = $(mandir)/man1
+-MANS = $(man_MANS)
++all: all-am
+
+-NROFF = nroff
+-DIST_COMMON = Makefile.am Makefile.in
++.SUFFIXES:
++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
++ @for dep in $?; do \
++ case '$(am__configure_deps)' in \
++ *$$dep*) \
++ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
++ && { if test -f $@; then exit 0; else break; fi; }; \
++ exit 1;; \
++ esac; \
++ done; \
++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \
++ $(am__cd) $(top_srcdir) && \
++ $(AUTOMAKE) --gnu man/Makefile
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++ @case '$?' in \
++ *config.status*) \
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
++ *) \
++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
++ esac;
++
++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
++
++$(top_srcdir)/configure: $(am__configure_deps)
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
++$(ACLOCAL_M4): $(am__aclocal_m4_deps)
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
++$(am__aclocal_m4_deps):
++install-man1: $(man_MANS)
++ @$(NORMAL_INSTALL)
++ @list1=''; \
++ list2='$(man_MANS)'; \
++ test -n "$(man1dir)" \
++ && test -n "`echo $$list1$$list2`" \
++ || exit 0; \
++ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
++ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
++ { for i in $$list1; do echo "$$i"; done; \
++ if test -n "$$list2"; then \
++ for i in $$list2; do echo "$$i"; done \
++ | sed -n '/\.1[a-z]*$$/p'; \
++ fi; \
++ } | while read p; do \
++ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
++ echo "$$d$$p"; echo "$$p"; \
++ done | \
++ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
++ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
++ sed 'N;N;s,\n, ,g' | { \
++ list=; while read file base inst; do \
++ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
++ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
++ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
++ fi; \
++ done; \
++ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
++ while read files; do \
++ test -z "$$files" || { \
++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
++ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
++ done; }
+
++uninstall-man1:
++ @$(NORMAL_UNINSTALL)
++ @list=''; test -n "$(man1dir)" || exit 0; \
++ files=`{ for i in $$list; do echo "$$i"; done; \
++ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
++ sed -n '/\.1[a-z]*$$/p'; \
++ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
++ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
++ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
++tags TAGS:
++
++ctags CTAGS:
++
++cscope cscopelist:
++
++
++distdir: $(BUILT_SOURCES)
++ $(MAKE) $(AM_MAKEFLAGS) distdir-am
++
++distdir-am: $(DISTFILES)
++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ list='$(DISTFILES)'; \
++ dist_files=`for file in $$list; do echo $$file; done | \
++ sed -e "s|^$$srcdirstrip/||;t" \
++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
++ case $$dist_files in \
++ */*) $(MKDIR_P) `echo "$$dist_files" | \
++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
++ sort -u` ;; \
++ esac; \
++ for file in $$dist_files; do \
++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
++ if test -d $$d/$$file; then \
++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
++ if test -d "$(distdir)/$$file"; then \
++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++ fi; \
++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++ fi; \
++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
++ else \
++ test -f "$(distdir)/$$file" \
++ || cp -p $$d/$$file "$(distdir)/$$file" \
++ || exit 1; \
++ fi; \
++ done
++check-am: all-am
++check: check-am
++all-am: Makefile $(MANS)
++installdirs:
++ for dir in "$(DESTDIR)$(man1dir)"; do \
++ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
++ done
++install: install-am
++install-exec: install-exec-am
++install-data: install-data-am
++uninstall: uninstall-am
+
+-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
++install-am: all-am
++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+-TAR = tar
+-GZIP = --best
+-all: Makefile $(MANS)
++installcheck: installcheck-am
++install-strip:
++ if test -z '$(STRIP)'; then \
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ install; \
++ else \
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
++ fi
++mostlyclean-generic:
+
+-.SUFFIXES:
+-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps man/Makefile
++clean-generic:
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+- cd $(top_builddir) \
+- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
++distclean-generic:
++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
++maintainer-clean-generic:
++ @echo "This command is intended for maintainers to use"
++ @echo "it deletes files that may require special tools to rebuild."
++clean: clean-am
+
+-install-man1:
+- $(mkinstalldirs) $(DESTDIR)$(man1dir)
+- @list='$(man1_MANS)'; \
+- l2='$(man_MANS)'; for i in $$l2; do \
+- case "$$i" in \
+- *.1*) list="$$list $$i" ;; \
+- esac; \
+- done; \
+- for i in $$list; do \
+- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+- else file=$$i; fi; \
+- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+- echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
+- $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
+- done
++clean-am: clean-generic mostlyclean-am
+
+-uninstall-man1:
+- @list='$(man1_MANS)'; \
+- l2='$(man_MANS)'; for i in $$l2; do \
+- case "$$i" in \
+- *.1*) list="$$list $$i" ;; \
+- esac; \
+- done; \
+- for i in $$list; do \
+- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+- echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
+- rm -f $(DESTDIR)$(man1dir)/$$inst; \
+- done
+-install-man: $(MANS)
+- @$(NORMAL_INSTALL)
+- $(MAKE) install-man1
+-uninstall-man:
+- @$(NORMAL_UNINSTALL)
+- $(MAKE) uninstall-man1
+-tags: TAGS
+-TAGS:
++distclean: distclean-am
++ -rm -f Makefile
++distclean-am: clean-am distclean-generic
+
++dvi: dvi-am
+
+-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
++dvi-am:
+
+-subdir = man
++html: html-am
+
+-distdir: $(DISTFILES)
+- @for file in $(DISTFILES); do \
+- d=$(srcdir); \
+- test -f $(distdir)/$$file \
+- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+- || cp -p $$d/$$file $(distdir)/$$file; \
+- done
+-info:
+-dvi:
+-check: all
+- $(MAKE)
+-installcheck:
+-install-exec:
+- @$(NORMAL_INSTALL)
++html-am:
+
+-install-data: install-man
+- @$(NORMAL_INSTALL)
++info: info-am
+
+-install: install-exec install-data all
+- @:
++info-am:
+
+-uninstall: uninstall-man
++install-data-am: install-man
+
+-install-strip:
+- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+-installdirs:
+- $(mkinstalldirs) $(DESTDIR)$(mandir)/man1
++install-dvi: install-dvi-am
+
++install-dvi-am:
+
+-mostlyclean-generic:
+- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
++install-exec-am:
+
+-clean-generic:
+- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
++install-html: install-html-am
+
+-distclean-generic:
+- -rm -f Makefile $(DISTCLEANFILES)
+- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
++install-html-am:
+
+-maintainer-clean-generic:
+- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+-mostlyclean: mostlyclean-generic
++install-info: install-info-am
+
+-clean: clean-generic mostlyclean
++install-info-am:
+
+-distclean: distclean-generic clean
+- -rm -f config.status
++install-man: install-man1
+
+-maintainer-clean: maintainer-clean-generic distclean
+- @echo "This command is intended for maintainers to use;"
+- @echo "it deletes files that may require special tools to rebuild."
++install-pdf: install-pdf-am
++
++install-pdf-am:
++
++install-ps: install-ps-am
++
++install-ps-am:
++
++installcheck-am:
++
++maintainer-clean: maintainer-clean-am
++ -rm -f Makefile
++maintainer-clean-am: distclean-am maintainer-clean-generic
++
++mostlyclean: mostlyclean-am
++
++mostlyclean-am: mostlyclean-generic
++
++pdf: pdf-am
++
++pdf-am:
++
++ps: ps-am
++
++ps-am:
++
++uninstall-am: uninstall-man
++
++uninstall-man: uninstall-man1
++
++.MAKE: install-am install-strip
++
++.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
++ ctags-am distclean distclean-generic distdir dvi dvi-am html \
++ html-am info info-am install install-am install-data \
++ install-data-am install-dvi install-dvi-am install-exec \
++ install-exec-am install-html install-html-am install-info \
++ install-info-am install-man install-man1 install-pdf \
++ install-pdf-am install-ps install-ps-am install-strip \
++ installcheck installcheck-am installdirs maintainer-clean \
++ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
++ pdf-am ps ps-am tags-am uninstall uninstall-am uninstall-man \
++ uninstall-man1
+
+-.PHONY: install-man1 uninstall-man1 install-man uninstall-man tags \
+-distdir info dvi installcheck install-exec install-data install \
+-uninstall all installdirs mostlyclean-generic distclean-generic \
+-clean-generic maintainer-clean-generic clean mostlyclean distclean \
+-maintainer-clean
++.PRECIOUS: Makefile
+
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+diff -uprN clean/lrzsz-0.12.20/po/boldquot.sed lrzsz-0.12.20/po/boldquot.sed
+--- clean/lrzsz-0.12.20/po/boldquot.sed 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/po/boldquot.sed 2019-11-25 18:21:17.000000000 +0000
+@@ -0,0 +1,10 @@
++s/"\([^"]*\)"/“\1â€/g
++s/`\([^`']*\)'/‘\1’/g
++s/ '\([^`']*\)' / ‘\1’ /g
++s/ '\([^`']*\)'$/ ‘\1’/g
++s/^'\([^`']*\)' /‘\1’ /g
++s/“â€/""/g
++s/“/“^[[1m/g
++s/â€/^[[0mâ€/g
++s/‘/‘^[[1m/g
++s/’/^[[0m’/g
+diff -uprN clean/lrzsz-0.12.20/po/cat-id-tbl.c lrzsz-0.12.20/po/cat-id-tbl.c
+--- clean/lrzsz-0.12.20/po/cat-id-tbl.c 1998-12-29 09:24:24.000000000 +0000
++++ lrzsz-0.12.20/po/cat-id-tbl.c 1970-01-01 01:00:00.000000000 +0100
+@@ -1,234 +0,0 @@
+-/* Automatically generated by po2tbl.sed from lrzsz.pot. */
+-
+-#if HAVE_CONFIG_H
+-# include <config.h>
+-#endif
+-
+-#include "libgettext.h"
+-
+-const struct _msg_ent _msg_tbl[] = {
+- {"", 1},
+- {"io_mode(,2) in rbsb.c not implemented\n", 2},
+- {"caught signal %d; exiting", 3},
+- {"command tries", 4},
+- {"packetlength", 5},
+- {"packetlength out of range 24..%ld", 6},
+- {"framelength", 7},
+- {"framelength out of range 32..%ld", 8},
+- {"min_bps", 9},
+- {"min_bps must be >= 0", 10},
+- {"min_bps_time", 11},
+- {"min_bps_time must be > 1", 12},
+- {"hour to large (0..23)", 13},
+- {"unparsable stop time\n", 14},
+- {"minute to large (0..59)", 15},
+- {"stop time to small", 16},
+- {"stop-at", 17},
+- {"timeout", 18},
+- {"timeout out of range 10..1000", 19},
+- {"security violation: can't do that under restricted shell\n", 20},
+- {"window size", 21},
+- {"cannot turnoff syslog", 22},
+- {"startup delay", 23},
+- {"out of memory", 24},
+- {"this program was never intended to be used setuid\n", 25},
+- {"need at least one file to send", 26},
+- {"Can't send command in restricted mode\n", 27},
+- {"hostname too long\n", 28},
+- {"illegal server address\n", 29},
+- {"can read only one file from stdin", 30},
+- {"Transfer incomplete\n", 31},
+- {"Transfer complete\n", 32},
+- {"send_pseudo %s: cannot open tmpfile %s: %s", 33},
+- {"send_pseudo %s: cannot lstat tmpfile %s: %s", 34},
+- {"send_pseudo %s: avoiding symlink trap", 35},
+- {"send_pseudo %s: cannot write to tmpfile %s: %s", 36},
+- {"send_pseudo %s: failed", 37},
+- {"send_pseudo %s: ok", 38},
+- {"tcp protocol init failed\n", 39},
+- {"Answering TIMESYNC at %s", 40},
+- {"timezone", 41},
+- {"timezone unknown", 42},
+- {"Can't open any requested files.", 43},
+- {"security violation: not allowed to upload from %s", 44},
+- {"cannot open %s", 45},
+- {"is not a file: %s", 46},
+- {"%s/%s: error occured", 47},
+- {"skipped: %s", 48},
+- {"%s/%s: skipped", 49},
+- {"Bytes Sent:%7ld BPS:%-8ld \n", 50},
+- {"Sending %s, %ld blocks: ", 51},
+- {"Give your local XMODEM receive command now.", 52},
+- {"Sending: %s\n", 53},
+- {"Timeout on pathname", 54},
+- {"Receiver Cancelled", 55},
+- {"No ACK on EOT", 56},
+- {"Xmodem sectors/kbytes sent: %3d/%2dk", 57},
+- {"Ymodem sectors/kbytes sent: %3d/%2dk", 58},
+- {"Cancelled", 59},
+- {"Timeout on sector ACK", 60},
+- {"NAK on sector", 61},
+- {"Got burst for sector ACK", 62},
+- {"Got %02x for sector ACK", 63},
+- {"Retry Count Exceeded", 64},
+- {"Try `%s --help' for more information.\n", 65},
+- {"%s version %s\n", 66},
+- {"Usage: %s [options] file ...\n", 67},
+- {" or: %s [options] -{c|i} COMMAND\n", 68},
+- {"Send file(s) with ZMODEM/YMODEM/XMODEM protocol\n", 69},
+- {"\
+- (X) = option applies to XMODEM only\n\
+- (Y) = option applies to YMODEM only\n\
+- (Z) = option applies to ZMODEM only\n", 70},
+- {"\
+- -+, --append append to existing destination file (Z)\n\
+- -2, --twostop use 2 stop bits\n\
+- -4, --try-4k go up to 4K blocksize\n\
+- --start-4k start with 4K blocksize (doesn't try 8)\n\
+- -8, --try-8k go up to 8K blocksize\n\
+- --start-8k start with 8K blocksize\n\
+- -a, --ascii ASCII transfer (change CR/LF to LF)\n\
+- -b, --binary binary transfer\n\
+- -B, --bufsize N buffer N bytes (N==auto: buffer whole file)\n\
+- -c, --command COMMAND execute remote command COMMAND (Z)\n\
+- -C, --command-tries N try N times to execute a command (Z)\n\
+- -d, --dot-to-slash change '.' to '/' in pathnames (Y/Z)\n\
+- --delay-startup N sleep N seconds before doing anything\n\
+- -e, --escape escape all control characters (Z)\n\
+- -E, --rename force receiver to rename files it already has\n\
+- -f, --full-path send full pathname (Y/Z)\n\
+- -i, --immediate-command CMD send remote CMD, return immediately (Z)\n\
+- -h, --help print this usage message\n\
+- -k, --1k send 1024 byte packets (X)\n\
+- -L, --packetlen N limit subpacket length to N bytes (Z)\n\
+- -l, --framelen N limit frame length to N bytes (l>=L) (Z)\n\
+- -m, --min-bps N stop transmission if BPS below N\n\
+- -M, --min-bps-time N for at least N seconds (default: 120)\n", 71},
+- {"\
+- -n, --newer send file if source newer (Z)\n\
+- -N, --newer-or-longer send file if source newer or longer (Z)\n\
+- -o, --16-bit-crc use 16 bit CRC instead of 32 bit CRC (Z)\n\
+- -O, --disable-timeouts disable timeout code, wait forever\n\
+- -p, --protect protect existing destination file (Z)\n\
+- -r, --resume resume interrupted file transfer (Z)\n\
+- -R, --restricted restricted, more secure mode\n\
+- -q, --quiet quiet (no progress reports)\n\
+- -s, --stop-at {HH:MM|+N} stop transmission at HH:MM or in N seconds\n\
+- --tcp build a TCP connection to transmit files\n\
+- --tcp-server open socket, wait for connection\n\
+- -u, --unlink unlink file after transmission\n\
+- -U, --unrestrict turn off restricted mode (if allowed to)\n\
+- -v, --verbose be verbose, provide debugging information\n\
+- -w, --windowsize N Window is N bytes (Z)\n\
+- -X, --xmodem use XMODEM protocol\n\
+- -y, --overwrite overwrite existing files\n\
+- -Y, --overwrite-or-skip overwrite existing files, else skip\n\
+- --ymodem use YMODEM protocol\n\
+- -Z, --zmodem use ZMODEM protocol\n\
+-\n\
+-short options use the same arguments as the long ones\n", 72},
+- {"got ZRQINIT", 73},
+- {"got ZCAN", 74},
+- {"blklen now %d\n", 75},
+- {"zsendfdata: bps rate %ld below min %ld", 76},
+- {"zsendfdata: reached stop time", 77},
+- {"Bytes Sent:%7ld/%7ld BPS:%-8ld ETA %02d:%02d ", 78},
+- {"calc_blklen: reduced to %d due to error\n", 79},
+- {"calc_blklen: returned old value %d due to low bpe diff\n", 80},
+- {"calc_blklen: old %ld, new %ld, d %ld\n", 81},
+- {"calc_blklen: calc total_bytes=%ld, bpe=%ld, ec=%ld\n", 82},
+- {"calc_blklen: blklen %d, ok %ld, failed %ld -> %lu\n", 83},
+- {"calc_blklen: returned %d as best\n", 84},
+- {"\
+-\n\
+-countem: Total %d %ld\n", 85},
+- {"Bad escape sequence %x", 86},
+- {"Sender Canceled", 87},
+- {"TIMEOUT", 88},
+- {"Bad data subpacket", 89},
+- {"Data subpacket too long", 90},
+- {"Garbage count exceeded", 91},
+- {"Got %s", 92},
+- {"Retry %d: ", 93},
+- {"don't have settimeofday, will not set time\n", 94},
+- {"not running as root (this is good!), can not set time\n", 95},
+- {"bytes_per_error", 96},
+- {"bytes-per-error should be >100", 97},
+- {"O_SYNC not supported by the kernel", 98},
+- {"garbage on commandline", 99},
+- {"Usage: %s [options] [filename.if.xmodem]\n", 100},
+- {"Receive files with ZMODEM/YMODEM/XMODEM protocol\n", 101},
+- {"\
+- -+, --append append to existing files\n\
+- -a, --ascii ASCII transfer (change CR/LF to LF)\n\
+- -b, --binary binary transfer\n\
+- -B, --bufsize N buffer N bytes (N==auto: buffer whole file)\n\
+- -c, --with-crc Use 16 bit CRC (X)\n\
+- -C, --allow-remote-commands allow execution of remote commands (Z)\n\
+- -D, --null write all received data to /dev/null\n\
+- --delay-startup N sleep N seconds before doing anything\n\
+- -e, --escape Escape control characters (Z)\n\
+- -E, --rename rename any files already existing\n\
+- --errors N generate CRC error every N bytes (debugging)\n\
+- -h, --help Help, print this usage message\n\
+- -m, --min-bps N stop transmission if BPS below N\n\
+- -M, --min-bps-time N for at least N seconds (default: 120)\n\
+- -O, --disable-timeouts disable timeout code, wait forever for data\n\
+- --o-sync open output file(s) in synchronous write mode\n\
+- -p, --protect protect existing files\n\
+- -q, --quiet quiet, no progress reports\n\
+- -r, --resume try to resume interrupted file transfer (Z)\n\
+- -R, --restricted restricted, more secure mode\n\
+- -s, --stop-at {HH:MM|+N} stop transmission at HH:MM or in N seconds\n\
+- -S, --timesync request remote time (twice: set local time)\n\
+- --syslog[=off] turn syslog on or off, if possible\n\
+- -t, --timeout N set timeout to N tenths of a second\n\
+- -u, --keep-uppercase keep upper case filenames\n\
+- -U, --unrestrict disable restricted mode (if allowed to)\n\
+- -v, --verbose be verbose, provide debugging information\n\
+- -w, --windowsize N Window is N bytes (Z)\n\
+- -X --xmodem use XMODEM protocol\n\
+- -y, --overwrite Yes, clobber existing file if any\n\
+- --ymodem use YMODEM protocol\n\
+- -Z, --zmodem use ZMODEM protocol\n\
+-\n\
+-short options use the same arguments as the long ones\n", 102},
+- {"%s waiting to receive.", 103},
+- {"\rBytes received: %7ld/%7ld BPS:%-6ld \r\n", 104},
+- {"%s: ready to receive %s", 105},
+- {"\rBytes received: %7ld BPS:%-6ld \r\n", 106},
+- {"\
+-\r\n\
+-%s: %s removed.\r\n", 107},
+- {"Pathname fetch returned EOT", 108},
+- {"Received dup Sector", 109},
+- {"Sync Error", 110},
+- {"CRC", 111},
+- {"Checksum", 112},
+- {"Sector number garbled", 113},
+- {"Sender Cancelled", 114},
+- {"Got 0%o sector header", 115},
+- {"file name ends with a /, skipped: %s\n", 116},
+- {"zmanag=%d, Lzmanag=%d\n", 117},
+- {"zconv=%d\n", 118},
+- {"file exists, skipped: %s\n", 119},
+- {"TIMESYNC: here %ld, remote %ld, diff %ld seconds\n", 120},
+- {"TIMESYNC: cannot set time: %s\n", 121},
+- {"cannot tmpfile() for tcp protocol synchronization", 122},
+- {"Topipe", 123},
+- {"Receiving: %s\n", 124},
+- {"Blocks received: %d", 125},
+- {"%s: %s exists\n", 126},
+- {"%s:\tSecurity Violation", 127},
+- {"remote command execution requested", 128},
+- {"not executed", 129},
+- {"got ZRINIT", 130},
+- {"Skipped", 131},
+- {"rzfile: bps rate %ld below min %ld", 132},
+- {"rzfile: reached stop time", 133},
+- {"\rBytes received: %7ld/%7ld BPS:%-6ld ETA %02d:%02d ", 134},
+- {"fgets for tcp protocol synchronization failed: ", 135},
+- {"file close error", 136},
+-};
+-
+-int _msg_tbl_length = 136;
+diff -uprN clean/lrzsz-0.12.20/po/ChangeLog lrzsz-0.12.20/po/ChangeLog
+--- clean/lrzsz-0.12.20/po/ChangeLog 1998-04-26 14:20:52.000000000 +0100
++++ lrzsz-0.12.20/po/ChangeLog 2019-11-25 18:21:03.000000000 +0000
+@@ -1,3 +1,25 @@
++2019-11-25 gettextize <bug-gnu-gettext@gnu.org>
++
++ * Makefile.in.in: Upgrade to gettext-0.20.1.
++ * en@boldquot.header: Upgrade to gettext-0.20.1.
++ * en@quot.header: Upgrade to gettext-0.20.1.
++ * insert-header.sin: Upgrade to gettext-0.20.1.
++ * remove-potcdate.sin: Upgrade to gettext-0.20.1.
++ * Rules-quot: Upgrade to gettext-0.20.1.
++
++2019-11-25 gettextize <bug-gnu-gettext@gnu.org>
++
++ * Makefile.in.in: Upgrade to gettext-0.19.8.1.
++ * boldquot.sed: New file, from gettext-0.19.8.1.
++ * en@boldquot.header: New file, from gettext-0.19.8.1.
++ * en@quot.header: New file, from gettext-0.19.8.1.
++ * insert-header.sin: New file, from gettext-0.19.8.1.
++ * quot.sed: New file, from gettext-0.19.8.1.
++ * remove-potcdate.sin: New file, from gettext-0.19.8.1.
++ * Rules-quot: New file, from gettext-0.19.8.1.
++ * cat-id-tbl.c: Remove file.
++ * stamp-cat-id: Remove file.
++
+ /* Automatically generated by po2tbl.sed from lrzsz.pot. */
+
+ #if HAVE_CONFIG_H
+Binary files clean/lrzsz-0.12.20/po/de.gmo and lrzsz-0.12.20/po/de.gmo differ
+diff -uprN clean/lrzsz-0.12.20/po/de.po lrzsz-0.12.20/po/de.po
+--- clean/lrzsz-0.12.20/po/de.po 1998-12-30 16:31:46.000000000 +0000
++++ lrzsz-0.12.20/po/de.po 2019-11-26 11:42:07.000000000 +0000
+@@ -6,10 +6,12 @@
+ msgid ""
+ msgstr ""
+ "Project-Id-Version: PACKAGE VERSION\n"
+-"POT-Creation-Date: 1998-12-30 08:49+0100\n"
++"Report-Msgid-Bugs-To: \n"
++"POT-Creation-Date: 2019-11-26 11:39+0000\n"
+ "PO-Revision-Date: 1997-06-01 19:00+0200\n"
+ "Last-Translator: FULL NAME <uwe@ohse.de>\n"
+ "Language-Team: none. try <uwe@ohse.de>\n"
++"Language: de\n"
+ "MIME-Version: 1.0\n"
+ "Content-Type: text/plain; charset=iso-8859-1\n"
+ "Content-Transfer-Encoding: 8bit\n"
+@@ -18,7 +20,7 @@ msgstr ""
+ msgid "io_mode(,2) in rbsb.c not implemented\n"
+ msgstr "io_mode(2) in rbsb.c nicht implementiert\n"
+
+-#: src/lrz.c:201 src/lsz.c:230
++#: src/lsz.c:230 src/lrz.c:201
+ #, c-format
+ msgid "caught signal %d; exiting"
+ msgstr "erhielt Signal %d; Programmabbruch"
+@@ -45,7 +47,7 @@ msgstr "Framelänge"
+ msgid "framelength out of range 32..%ld"
+ msgstr "Argument der Option l außerhalb des Bereichs 32..%ld"
+
+-#: src/lrz.c:323 src/lsz.c:450
++#: src/lsz.c:450 src/lrz.c:323
+ msgid "min_bps"
+ msgstr "minimale BPS-Rate"
+
+@@ -53,65 +55,65 @@ msgstr "minimale BPS-Rate"
+ msgid "min_bps must be >= 0"
+ msgstr "minimale BPS-Rate muß >= 0 sein"
+
+-#: src/lrz.c:329 src/lsz.c:458
++#: src/lsz.c:458 src/lrz.c:329
+ msgid "min_bps_time"
+ msgstr ""
+
+-#: src/lrz.c:331 src/lsz.c:460
++#: src/lsz.c:460 src/lrz.c:331
+ msgid "min_bps_time must be > 1"
+ msgstr "Zeitfenster für minimale BPS-Rate muß > 1 Sekunde sein"
+
+-#: src/lrz.c:347 src/lsz.c:484
++#: src/lsz.c:484 src/lrz.c:347
+ msgid "hour to large (0..23)"
+ msgstr "Stunde zu gross (0..23)"
+
+-#: src/lrz.c:349 src/lsz.c:486
++#: src/lsz.c:486 src/lrz.c:349
+ msgid "unparsable stop time\n"
+ msgstr "unparsbare Endzeit\n"
+
+-#: src/lrz.c:353 src/lsz.c:490
++#: src/lsz.c:490 src/lrz.c:353
+ msgid "minute to large (0..59)"
+ msgstr "Minute zu groß (0..59)"
+
+-#: src/lrz.c:363 src/lrz.c:370 src/lsz.c:500 src/lsz.c:507
++#: src/lsz.c:500 src/lsz.c:507 src/lrz.c:363 src/lrz.c:370
+ msgid "stop time to small"
+ msgstr "Stopzeit zu kurz"
+
+-#: src/lrz.c:368 src/lsz.c:505
++#: src/lsz.c:505 src/lrz.c:368
+ msgid "stop-at"
+ msgstr ""
+
+-#: src/lrz.c:399 src/lsz.c:516
++#: src/lsz.c:516 src/lrz.c:399
+ msgid "timeout"
+ msgstr "Timeout"
+
+-#: src/lrz.c:401 src/lsz.c:518
++#: src/lsz.c:518 src/lrz.c:401
+ msgid "timeout out of range 10..1000"
+ msgstr "Argument der Option t außerhalb des Bereichs 10..1000"
+
+-#: src/lrz.c:417 src/lsz.c:526
++#: src/lsz.c:526 src/lrz.c:417
+ msgid "security violation: can't do that under restricted shell\n"
+ msgstr "Sicherheitsverstoß: Ausführung unter eingeschränkter Shell verboten\n"
+
+-#: src/lrz.c:407 src/lsz.c:533
++#: src/lsz.c:533 src/lrz.c:407
+ msgid "window size"
+ msgstr "Fenstergröße"
+
+-#: src/lrz.c:432 src/lrz.c:439 src/lsz.c:556 src/lsz.c:563
++#: src/lsz.c:556 src/lsz.c:563 src/lrz.c:432 src/lrz.c:439
+ msgid "cannot turnoff syslog"
+ msgstr "kann syslogging nicht abschalten"
+
+-#: src/lrz.c:454 src/lsz.c:571
++#: src/lsz.c:571 src/lrz.c:454
+ msgid "startup delay"
+ msgstr "Startverzögerung"
+
++#: src/lsz.c:583 src/lsz.c:692 src/lsz.c:831 src/lsz.c:1080 src/zreadline.c:127
+ #: src/lrz.c:470 src/lrz.c:755 src/lrz.c:1117 src/lrz.c:1243 src/lrz.c:1300
+-#: src/lrz.c:1317 src/lrz.c:1332 src/lrz.c:1431 src/lsz.c:583 src/lsz.c:692
+-#: src/lsz.c:831 src/lsz.c:1080 src/zreadline.c:127
++#: src/lrz.c:1317 src/lrz.c:1332 src/lrz.c:1431
+ msgid "out of memory"
+ msgstr "Kein Speicher mehr frei"
+
+-#: src/lrz.c:480 src/lsz.c:595
++#: src/lsz.c:595 src/lrz.c:480
+ msgid "this program was never intended to be used setuid\n"
+ msgstr "dieses Programm darf nicht setuid laufen\n"
+
+@@ -120,14 +122,15 @@ msgid "need at least one file to send"
+ msgstr "es muß mindestens ein Name einer zu sendenden Datei angegeben werden"
+
+ #: src/lsz.c:628
++#, c-format
+ msgid "Can't send command in restricted mode\n"
+ msgstr "Im eingeschränkten Modus ist das Senden von Kommandos verboten\n"
+
+-#: src/lrz.c:524 src/lsz.c:655
++#: src/lsz.c:655 src/lrz.c:524
+ msgid "hostname too long\n"
+ msgstr "Hostname zu lang\n"
+
+-#: src/lrz.c:539 src/lsz.c:670
++#: src/lsz.c:670 src/lrz.c:539
+ msgid "illegal server address\n"
+ msgstr "Illegale Serveraddresse\n"
+
+@@ -135,11 +138,11 @@ msgstr "Illegale Serveraddresse\n"
+ msgid "can read only one file from stdin"
+ msgstr "kann nur eine Datei von der Standardeingabe lesen"
+
+-#: src/lrz.c:571 src/lsz.c:806
++#: src/lsz.c:806 src/lrz.c:571
+ msgid "Transfer incomplete\n"
+ msgstr "Übertragung nicht abgeschlossen\n"
+
+-#: src/lrz.c:573 src/lsz.c:808
++#: src/lsz.c:808 src/lrz.c:573
+ msgid "Transfer complete\n"
+ msgstr "Übertragung abgeschlossen\n"
+
+@@ -197,9 +200,9 @@ msgstr "Kann keine der angeforderten Dat
+ #: src/lsz.c:1028
+ #, c-format
+ msgid "security violation: not allowed to upload from %s"
+-msgstr "Sicherheitsverstoß: Ausführung unter eingeschränkter Shell verboten"
++msgstr "Sicherheitsverstoß: Ausführung unter %s verboten"
+
+-#: src/lrz.c:1392 src/lsz.c:1046
++#: src/lsz.c:1046 src/lrz.c:1392
+ #, c-format
+ msgid "cannot open %s"
+ msgstr "kann %s nicht öffnen"
+@@ -290,12 +293,12 @@ msgstr "Erhielt %02x als Sektorbestätigu
+ msgid "Retry Count Exceeded"
+ msgstr "Maximale Wiederholungsanzahl überschritten"
+
+-#: src/lrz.c:593 src/lsz.c:1521
++#: src/lsz.c:1521 src/lrz.c:593
+ #, c-format
+ msgid "Try `%s --help' for more information.\n"
+ msgstr "`%s --help' gibt weitere Informationen.\n"
+
+-#: src/lrz.c:598 src/lsz.c:1526
++#: src/lsz.c:1526 src/lrz.c:598
+ #, c-format
+ msgid "%s version %s\n"
+ msgstr "%s Version %s\n"
+@@ -315,7 +318,7 @@ msgid "Send file(s) with ZMODEM/YMODEM/X
+ msgstr "Dateien mit ZMODEM/YMODEM/XMODEM übertragen\n"
+
+ # src/lrz.c:475 src/lsz.c:1330 xx
+-#: src/lrz.c:604 src/lsz.c:1534
++#: src/lsz.c:1534 src/lrz.c:604
+ msgid ""
+ " (X) = option applies to XMODEM only\n"
+ " (Y) = option applies to YMODEM only\n"
+@@ -431,7 +434,7 @@ msgstr ""
+ msgid "got ZRQINIT"
+ msgstr "erhielt ZRQINIT"
+
+-#: src/lrz.c:1074 src/lrz.c:1787 src/lsz.c:1792
++#: src/lsz.c:1792 src/lrz.c:1074 src/lrz.c:1787
+ msgid "got ZCAN"
+ msgstr "erhielt ZCAN"
+
+@@ -472,7 +475,7 @@ msgstr "calc_blklen: alt %ld, neu %ld, D
+ #: src/lsz.c:2272
+ #, c-format
+ msgid "calc_blklen: calc total_bytes=%ld, bpe=%ld, ec=%ld\n"
+-msgstr "calc_blklen: kalkuliere gesamt_bytes=%ld, bpe=%le, ec=%ld\n"
++msgstr "calc_blklen: kalkuliere gesamt_bytes=%ld, bpe=%ld, ec=%ld\n"
+
+ #: src/lsz.c:2283
+ #, c-format
+@@ -493,6 +496,10 @@ msgstr ""
+ "\n"
+ "countem: Gesamt %d %ld\n"
+
++#: src/zm.c:91
++msgid "Bad CRC"
++msgstr ""
++
+ #: src/zm.c:244
+ #, c-format
+ msgid "Bad escape sequence %x"
+@@ -502,7 +509,7 @@ msgstr "Falsche Escapesequenz %x"
+ msgid "Sender Canceled"
+ msgstr "Sender brach ab"
+
+-#: src/lrz.c:997 src/zm.c:585 src/zm.c:644
++#: src/zm.c:585 src/zm.c:644 src/lrz.c:997
+ msgid "TIMEOUT"
+ msgstr "TIMEOUT"
+
+@@ -772,13 +779,11 @@ msgstr "Erhielt unerwartetes ZRINIT"
+ msgid "Skipped"
+ msgstr "Übersprungen"
+
+-#. too bad
+ #: src/lrz.c:2064
+ #, c-format
+ msgid "rzfile: bps rate %ld below min %ld"
+ msgstr "rzfile: BPS-Rate %ld unter Minimum %ld"
+
+-#. too bad
+ #: src/lrz.c:2079
+ msgid "rzfile: reached stop time"
+ msgstr "rzfile: Abbruchzeit erreicht"
+diff -uprN clean/lrzsz-0.12.20/po/en@boldquot.header lrzsz-0.12.20/po/en@boldquot.header
+--- clean/lrzsz-0.12.20/po/en@boldquot.header 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/po/en@boldquot.header 2019-11-25 18:21:17.000000000 +0000
+@@ -0,0 +1,25 @@
++# All this catalog "translates" are quotation characters.
++# The msgids must be ASCII and therefore cannot contain real quotation
++# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
++# and double quote (0x22). These substitutes look strange; see
++# https://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
++#
++# This catalog translates grave accent (0x60) and apostrophe (0x27) to
++# left single quotation mark (U+2018) and right single quotation mark (U+2019).
++# It also translates pairs of apostrophe (0x27) to
++# left single quotation mark (U+2018) and right single quotation mark (U+2019)
++# and pairs of quotation mark (0x22) to
++# left double quotation mark (U+201C) and right double quotation mark (U+201D).
++#
++# When output to an UTF-8 terminal, the quotation characters appear perfectly.
++# When output to an ISO-8859-1 terminal, the single quotation marks are
++# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
++# grave/acute accent (by libiconv), and the double quotation marks are
++# transliterated to 0x22.
++# When output to an ASCII terminal, the single quotation marks are
++# transliterated to apostrophes, and the double quotation marks are
++# transliterated to 0x22.
++#
++# This catalog furthermore displays the text between the quotation marks in
++# bold face, assuming the VT100/XTerm escape sequences.
++#
+diff -uprN clean/lrzsz-0.12.20/po/en@quot.header lrzsz-0.12.20/po/en@quot.header
+--- clean/lrzsz-0.12.20/po/en@quot.header 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/po/en@quot.header 2019-11-25 18:21:17.000000000 +0000
+@@ -0,0 +1,22 @@
++# All this catalog "translates" are quotation characters.
++# The msgids must be ASCII and therefore cannot contain real quotation
++# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
++# and double quote (0x22). These substitutes look strange; see
++# https://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
++#
++# This catalog translates grave accent (0x60) and apostrophe (0x27) to
++# left single quotation mark (U+2018) and right single quotation mark (U+2019).
++# It also translates pairs of apostrophe (0x27) to
++# left single quotation mark (U+2018) and right single quotation mark (U+2019)
++# and pairs of quotation mark (0x22) to
++# left double quotation mark (U+201C) and right double quotation mark (U+201D).
++#
++# When output to an UTF-8 terminal, the quotation characters appear perfectly.
++# When output to an ISO-8859-1 terminal, the single quotation marks are
++# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
++# grave/acute accent (by libiconv), and the double quotation marks are
++# transliterated to 0x22.
++# When output to an ASCII terminal, the single quotation marks are
++# transliterated to apostrophes, and the double quotation marks are
++# transliterated to 0x22.
++#
+diff -uprN clean/lrzsz-0.12.20/po/insert-header.sin lrzsz-0.12.20/po/insert-header.sin
+--- clean/lrzsz-0.12.20/po/insert-header.sin 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/po/insert-header.sin 2019-11-25 18:21:17.000000000 +0000
+@@ -0,0 +1,28 @@
++# Sed script that inserts the file called HEADER before the header entry.
++#
++# Copyright (C) 2001 Free Software Foundation, Inc.
++# Written by Bruno Haible <bruno@clisp.org>, 2001.
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to use, copy, distribute, and modify it.
++#
++# At each occurrence of a line starting with "msgid ", we execute the following
++# commands. At the first occurrence, insert the file. At the following
++# occurrences, do nothing. The distinction between the first and the following
++# occurrences is achieved by looking at the hold space.
++/^msgid /{
++x
++# Test if the hold space is empty.
++s/m/m/
++ta
++# Yes it was empty. First occurrence. Read the file.
++r HEADER
++# Output the file's contents by reading the next line. But don't lose the
++# current line while doing this.
++g
++N
++bb
++:a
++# The hold space was nonempty. Following occurrences. Do nothing.
++x
++:b
++}
+diff -uprN clean/lrzsz-0.12.20/po/lrzsz.pot lrzsz-0.12.20/po/lrzsz.pot
+--- clean/lrzsz-0.12.20/po/lrzsz.pot 1998-12-30 07:50:00.000000000 +0000
++++ lrzsz-0.12.20/po/lrzsz.pot 2019-11-26 11:39:12.000000000 +0000
+@@ -1,24 +1,27 @@
+ # SOME DESCRIPTIVE TITLE.
+ # Copyright (C) YEAR Free Software Foundation, Inc.
++# This file is distributed under the same license as the lrzsz package.
+ # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+ #
+ #, fuzzy
+ msgid ""
+ msgstr ""
+-"Project-Id-Version: PACKAGE VERSION\n"
+-"POT-Creation-Date: 1998-12-30 08:49+0100\n"
++"Project-Id-Version: lrzsz 0.12.20\n"
++"Report-Msgid-Bugs-To: \n"
++"POT-Creation-Date: 2019-11-26 11:39+0000\n"
+ "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+ "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+ "Language-Team: LANGUAGE <LL@li.org>\n"
++"Language: \n"
+ "MIME-Version: 1.0\n"
+ "Content-Type: text/plain; charset=CHARSET\n"
+-"Content-Transfer-Encoding: ENCODING\n"
++"Content-Transfer-Encoding: 8bit\n"
+
+ #: src/lsz.c:228
+ msgid "io_mode(,2) in rbsb.c not implemented\n"
+ msgstr ""
+
+-#: src/lrz.c:201 src/lsz.c:230
++#: src/lsz.c:230 src/lrz.c:201
+ #, c-format
+ msgid "caught signal %d; exiting"
+ msgstr ""
+@@ -45,7 +48,7 @@ msgstr ""
+ msgid "framelength out of range 32..%ld"
+ msgstr ""
+
+-#: src/lrz.c:323 src/lsz.c:450
++#: src/lsz.c:450 src/lrz.c:323
+ msgid "min_bps"
+ msgstr ""
+
+@@ -53,65 +56,65 @@ msgstr ""
+ msgid "min_bps must be >= 0"
+ msgstr ""
+
+-#: src/lrz.c:329 src/lsz.c:458
++#: src/lsz.c:458 src/lrz.c:329
+ msgid "min_bps_time"
+ msgstr ""
+
+-#: src/lrz.c:331 src/lsz.c:460
++#: src/lsz.c:460 src/lrz.c:331
+ msgid "min_bps_time must be > 1"
+ msgstr ""
+
+-#: src/lrz.c:347 src/lsz.c:484
++#: src/lsz.c:484 src/lrz.c:347
+ msgid "hour to large (0..23)"
+ msgstr ""
+
+-#: src/lrz.c:349 src/lsz.c:486
++#: src/lsz.c:486 src/lrz.c:349
+ msgid "unparsable stop time\n"
+ msgstr ""
+
+-#: src/lrz.c:353 src/lsz.c:490
++#: src/lsz.c:490 src/lrz.c:353
+ msgid "minute to large (0..59)"
+ msgstr ""
+
+-#: src/lrz.c:363 src/lrz.c:370 src/lsz.c:500 src/lsz.c:507
++#: src/lsz.c:500 src/lsz.c:507 src/lrz.c:363 src/lrz.c:370
+ msgid "stop time to small"
+ msgstr ""
+
+-#: src/lrz.c:368 src/lsz.c:505
++#: src/lsz.c:505 src/lrz.c:368
+ msgid "stop-at"
+ msgstr ""
+
+-#: src/lrz.c:399 src/lsz.c:516
++#: src/lsz.c:516 src/lrz.c:399
+ msgid "timeout"
+ msgstr ""
+
+-#: src/lrz.c:401 src/lsz.c:518
++#: src/lsz.c:518 src/lrz.c:401
+ msgid "timeout out of range 10..1000"
+ msgstr ""
+
+-#: src/lrz.c:417 src/lsz.c:526
++#: src/lsz.c:526 src/lrz.c:417
+ msgid "security violation: can't do that under restricted shell\n"
+ msgstr ""
+
+-#: src/lrz.c:407 src/lsz.c:533
++#: src/lsz.c:533 src/lrz.c:407
+ msgid "window size"
+ msgstr ""
+
+-#: src/lrz.c:432 src/lrz.c:439 src/lsz.c:556 src/lsz.c:563
++#: src/lsz.c:556 src/lsz.c:563 src/lrz.c:432 src/lrz.c:439
+ msgid "cannot turnoff syslog"
+ msgstr ""
+
+-#: src/lrz.c:454 src/lsz.c:571
++#: src/lsz.c:571 src/lrz.c:454
+ msgid "startup delay"
+ msgstr ""
+
++#: src/lsz.c:583 src/lsz.c:692 src/lsz.c:831 src/lsz.c:1080 src/zreadline.c:127
+ #: src/lrz.c:470 src/lrz.c:755 src/lrz.c:1117 src/lrz.c:1243 src/lrz.c:1300
+-#: src/lrz.c:1317 src/lrz.c:1332 src/lrz.c:1431 src/lsz.c:583 src/lsz.c:692
+-#: src/lsz.c:831 src/lsz.c:1080 src/zreadline.c:127
++#: src/lrz.c:1317 src/lrz.c:1332 src/lrz.c:1431
+ msgid "out of memory"
+ msgstr ""
+
+-#: src/lrz.c:480 src/lsz.c:595
++#: src/lsz.c:595 src/lrz.c:480
+ msgid "this program was never intended to be used setuid\n"
+ msgstr ""
+
+@@ -120,14 +123,15 @@ msgid "need at least one file to send"
+ msgstr ""
+
+ #: src/lsz.c:628
++#, c-format
+ msgid "Can't send command in restricted mode\n"
+ msgstr ""
+
+-#: src/lrz.c:524 src/lsz.c:655
++#: src/lsz.c:655 src/lrz.c:524
+ msgid "hostname too long\n"
+ msgstr ""
+
+-#: src/lrz.c:539 src/lsz.c:670
++#: src/lsz.c:670 src/lrz.c:539
+ msgid "illegal server address\n"
+ msgstr ""
+
+@@ -135,11 +139,11 @@ msgstr ""
+ msgid "can read only one file from stdin"
+ msgstr ""
+
+-#: src/lrz.c:571 src/lsz.c:806
++#: src/lsz.c:806 src/lrz.c:571
+ msgid "Transfer incomplete\n"
+ msgstr ""
+
+-#: src/lrz.c:573 src/lsz.c:808
++#: src/lsz.c:808 src/lrz.c:573
+ msgid "Transfer complete\n"
+ msgstr ""
+
+@@ -199,7 +203,7 @@ msgstr ""
+ msgid "security violation: not allowed to upload from %s"
+ msgstr ""
+
+-#: src/lrz.c:1392 src/lsz.c:1046
++#: src/lsz.c:1046 src/lrz.c:1392
+ #, c-format
+ msgid "cannot open %s"
+ msgstr ""
+@@ -290,12 +294,12 @@ msgstr ""
+ msgid "Retry Count Exceeded"
+ msgstr ""
+
+-#: src/lrz.c:593 src/lsz.c:1521
++#: src/lsz.c:1521 src/lrz.c:593
+ #, c-format
+ msgid "Try `%s --help' for more information.\n"
+ msgstr ""
+
+-#: src/lrz.c:598 src/lsz.c:1526
++#: src/lsz.c:1526 src/lrz.c:598
+ #, c-format
+ msgid "%s version %s\n"
+ msgstr ""
+@@ -314,7 +318,7 @@ msgstr ""
+ msgid "Send file(s) with ZMODEM/YMODEM/XMODEM protocol\n"
+ msgstr ""
+
+-#: src/lrz.c:604 src/lsz.c:1534
++#: src/lsz.c:1534 src/lrz.c:604
+ msgid ""
+ " (X) = option applies to XMODEM only\n"
+ " (Y) = option applies to YMODEM only\n"
+@@ -378,7 +382,7 @@ msgstr ""
+ msgid "got ZRQINIT"
+ msgstr ""
+
+-#: src/lrz.c:1074 src/lrz.c:1787 src/lsz.c:1792
++#: src/lsz.c:1792 src/lrz.c:1074 src/lrz.c:1787
+ msgid "got ZCAN"
+ msgstr ""
+
+@@ -438,6 +442,10 @@ msgid ""
+ "countem: Total %d %ld\n"
+ msgstr ""
+
++#: src/zm.c:91
++msgid "Bad CRC"
++msgstr ""
++
+ #: src/zm.c:244
+ #, c-format
+ msgid "Bad escape sequence %x"
+@@ -447,7 +455,7 @@ msgstr ""
+ msgid "Sender Canceled"
+ msgstr ""
+
+-#: src/lrz.c:997 src/zm.c:585 src/zm.c:644
++#: src/zm.c:585 src/zm.c:644 src/lrz.c:997
+ msgid "TIMEOUT"
+ msgstr ""
+
+@@ -678,13 +686,11 @@ msgstr ""
+ msgid "Skipped"
+ msgstr ""
+
+-#. too bad
+ #: src/lrz.c:2064
+ #, c-format
+ msgid "rzfile: bps rate %ld below min %ld"
+ msgstr ""
+
+-#. too bad
+ #: src/lrz.c:2079
+ msgid "rzfile: reached stop time"
+ msgstr ""
+diff -uprN clean/lrzsz-0.12.20/po/Makefile.in.in lrzsz-0.12.20/po/Makefile.in.in
+--- clean/lrzsz-0.12.20/po/Makefile.in.in 1998-04-26 14:22:40.000000000 +0100
++++ lrzsz-0.12.20/po/Makefile.in.in 2019-11-25 18:21:17.000000000 +0000
+@@ -1,14 +1,20 @@
+-# Makefile for program source directory in GNU NLS utilities package.
+-# Copyright (C) 1995, 1996, 1997 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
++# Makefile for PO directory in any package using GNU gettext.
++# Copyright (C) 1995-2000 Ulrich Drepper <drepper@gnu.ai.mit.edu>
++# Copyright (C) 2000-2019 Free Software Foundation, Inc.
+ #
+-# This file file be copied and used freely without restrictions. It can
+-# be used in projects which are not available under the GNU Public License
+-# but which still want to provide support for the GNU gettext functionality.
+-# Please note that the actual code is *not* freely available.
++# Copying and distribution of this file, with or without modification,
++# are permitted in any medium without royalty provided the copyright
++# notice and this notice are preserved. This file is offered as-is,
++# without any warranty.
++#
++# Origin: gettext-0.20
++GETTEXT_MACRO_VERSION = 0.20
+
+ PACKAGE = @PACKAGE@
+ VERSION = @VERSION@
++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+
++SED = @SED@
+ SHELL = /bin/sh
+ @SET_MAKE@
+
+@@ -18,229 +24,479 @@ VPATH = @srcdir@
+
+ prefix = @prefix@
+ exec_prefix = @exec_prefix@
+-datadir = $(prefix)/@DATADIRNAME@
+-localedir = $(datadir)/locale
+-gnulocaledir = $(prefix)/share/locale
+-gettextsrcdir = $(prefix)/share/gettext/po
+-subdir = po
++datarootdir = @datarootdir@
++datadir = @datadir@
++localedir = @localedir@
++gettextsrcdir = $(datadir)/gettext/po
+
+ INSTALL = @INSTALL@
+ INSTALL_DATA = @INSTALL_DATA@
+-MKINSTALLDIRS = $(top_srcdir)/@MKINSTALLDIRS@
+-
+-CC = @CC@
+-GENCAT = @GENCAT@
+-GMSGFMT = PATH=../src:$$PATH @GMSGFMT@
+-MSGFMT = @MSGFMT@
+-XGETTEXT = PATH=../src:$$PATH @XGETTEXT@
+-MSGMERGE = PATH=../src:$$PATH msgmerge
+-
+-DEFS = @DEFS@
+-CFLAGS = @CFLAGS@
+-CPPFLAGS = @CPPFLAGS@
+-
+-INCLUDES = -I.. -I$(top_srcdir)/intl
+
+-COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS)
++# We use $(mkdir_p).
++# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
++# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
++# @install_sh@ does not start with $(SHELL), so we add it.
++# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
++# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
++# versions, $(mkinstalldirs) and $(install_sh) are unused.
++mkinstalldirs = $(SHELL) @install_sh@ -d
++install_sh = $(SHELL) @install_sh@
++MKDIR_P = @MKDIR_P@
++mkdir_p = @mkdir_p@
++
++# When building gettext-tools, we prefer to use the built programs
++# rather than installed programs. However, we can't do that when we
++# are cross compiling.
++CROSS_COMPILING = @CROSS_COMPILING@
++
++GMSGFMT_ = @GMSGFMT@
++GMSGFMT_no = @GMSGFMT@
++GMSGFMT_yes = @GMSGFMT_015@
++GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
++XGETTEXT_ = @XGETTEXT@
++XGETTEXT_no = @XGETTEXT@
++XGETTEXT_yes = @XGETTEXT_015@
++XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
++MSGMERGE = @MSGMERGE@
++MSGMERGE_UPDATE = @MSGMERGE@ --update
++MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
++MSGINIT = msginit
++MSGCONV = msgconv
++MSGFILTER = msgfilter
+
+-SOURCES = cat-id-tbl.c
+ POFILES = @POFILES@
+ GMOFILES = @GMOFILES@
+-DISTFILES = ChangeLog Makefile.in.in POTFILES.in $(PACKAGE).pot \
+-stamp-cat-id $(POFILES) $(GMOFILES) $(SOURCES)
++UPDATEPOFILES = @UPDATEPOFILES@
++DUMMYPOFILES = @DUMMYPOFILES@
++DISTFILES.common = Makefile.in.in remove-potcdate.sin \
++$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
++DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
++$(POFILES) $(GMOFILES) \
++$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+ POTFILES = \
+
+ CATALOGS = @CATALOGS@
+-CATOBJEXT = @CATOBJEXT@
+-INSTOBJEXT = @INSTOBJEXT@
+
+-.SUFFIXES:
+-.SUFFIXES: .c .o .po .pox .gmo .mo .msg .cat
+-
+-.c.o:
+- $(COMPILE) $<
++POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
++POFILESDEPS_yes = $(POFILESDEPS_)
++POFILESDEPS_no =
++POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))
++
++DISTFILESDEPS_ = update-po
++DISTFILESDEPS_yes = $(DISTFILESDEPS_)
++DISTFILESDEPS_no =
++DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))
+
+-.po.pox:
+- $(MAKE) $(PACKAGE).pot
+- $(MSGMERGE) $< $(srcdir)/$(PACKAGE).pot -o $*.pox
++# Makevars gets inserted here. (Don't remove this line!)
+
+-.po.mo:
+- $(MSGFMT) -o $@ $<
+-
+-.po.gmo:
+- file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+- && rm -f $$file && $(GMSGFMT) -o $$file $<
++.SUFFIXES:
++.SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update
+
+-.po.cat:
+- sed -f ../intl/po2msg.sed < $< > $*.msg \
+- && rm -f $@ && $(GENCAT) $@ $*.msg
++# The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs.
++# The GNU Coding Standards say in
++# <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>:
++# "GNU distributions usually contain some files which are not source files
++# ... . Since these files normally appear in the source directory, they
++# should always appear in the source directory, not in the build directory.
++# So Makefile rules to update them should put the updated files in the
++# source directory."
++# Therefore we put these files in the source directory, not the build directory.
++
++# During .po -> .gmo conversion, take into account the most recent changes to
++# the .pot file. This eliminates the need to update the .po files when the
++# .pot file has changed, which would be troublesome if the .po files are put
++# under version control.
++.po.gmo: $(srcdir)/$(DOMAIN).pot
++ @lang=`echo $* | sed -e 's,.*/,,'`; \
++ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
++ echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \
++ cd $(srcdir) && \
++ rm -f $${lang}.gmo && \
++ $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \
++ $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \
++ mv t-$${lang}.gmo $${lang}.gmo && \
++ rm -f $${lang}.1po
++
++.sin.sed:
++ sed -e '/^#/d' $< > t-$@
++ mv t-$@ $@
+
+
+ all: all-@USE_NLS@
+
+-all-yes: cat-id-tbl.c $(CATALOGS)
++all-yes: $(srcdir)/stamp-po
+ all-no:
+
+-$(srcdir)/$(PACKAGE).pot: $(POTFILES)
+- $(XGETTEXT) --default-domain=$(PACKAGE) --directory=$(top_srcdir) \
+- --add-comments --keyword=_ --keyword=N_ \
+- --files-from=$(srcdir)/POTFILES.in
+- rm -f $(srcdir)/$(PACKAGE).pot
+- mv $(PACKAGE).po $(srcdir)/$(PACKAGE).pot
+-
+-$(srcdir)/cat-id-tbl.c: stamp-cat-id; @:
+-$(srcdir)/stamp-cat-id: $(PACKAGE).pot
+- rm -f cat-id-tbl.tmp
+- sed -f ../intl/po2tbl.sed $(srcdir)/$(PACKAGE).pot \
+- | sed -e "s/@PACKAGE NAME@/$(PACKAGE)/" > cat-id-tbl.tmp
+- if cmp -s cat-id-tbl.tmp $(srcdir)/cat-id-tbl.c; then \
+- rm cat-id-tbl.tmp; \
+- else \
+- echo cat-id-tbl.c changed; \
+- rm -f $(srcdir)/cat-id-tbl.c; \
+- mv cat-id-tbl.tmp $(srcdir)/cat-id-tbl.c; \
++# Ensure that the gettext macros and this Makefile.in.in are in sync.
++CHECK_MACRO_VERSION = \
++ test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
++ || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
++ exit 1; \
++ }
++
++# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
++# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
++# we don't want to bother translators with empty POT files). We assume that
++# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
++# In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target).
++
++# $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS
++# have been loosely updated. Its purpose is that when a developer or translator
++# checks out the package from a version control system, and the $(DOMAIN).pot
++# file is not under version control, "make" will update the $(DOMAIN).pot and
++# the $(CATALOGS), but subsequent invocations of "make" will do nothing. This
++# timestamp would not be necessary if updating the $(CATALOGS) would always
++# touch them; however, the rule for $(POFILES) has been designed to not touch
++# files that don't need to be changed.
++$(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot
++ @$(CHECK_MACRO_VERSION)
++ test ! -f $(srcdir)/$(DOMAIN).pot || \
++ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
++ @test ! -f $(srcdir)/$(DOMAIN).pot || { \
++ echo "touch $(srcdir)/stamp-po" && \
++ echo timestamp > $(srcdir)/stamp-poT && \
++ mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \
++ }
++
++# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
++# otherwise packages like GCC can not be built if only parts of the source
++# have been downloaded.
++
++# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
++# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
++# The determination of whether the package xyz is a GNU one is based on the
++# heuristic whether some file in the top level directory mentions "GNU xyz".
++# If GNU 'find' is available, we avoid grepping through monster files.
++$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
++ package_gnu="$(PACKAGE_GNU)"; \
++ test -n "$$package_gnu" || { \
++ if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
++ LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU @PACKAGE@' /dev/null '{}' ';' 2>/dev/null; \
++ else \
++ LC_ALL=C grep -i 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \
++ fi; \
++ } | grep -v 'libtool:' >/dev/null; then \
++ package_gnu=yes; \
++ else \
++ package_gnu=no; \
++ fi; \
++ }; \
++ if test "$$package_gnu" = "yes"; then \
++ package_prefix='GNU '; \
++ else \
++ package_prefix=''; \
++ fi; \
++ if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
++ msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
++ else \
++ msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
++ fi; \
++ case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
++ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
++ --add-comments=TRANSLATORS: \
++ --files-from=$(srcdir)/POTFILES.in \
++ --copyright-holder='$(COPYRIGHT_HOLDER)' \
++ --msgid-bugs-address="$$msgid_bugs_address" \
++ $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
++ ;; \
++ *) \
++ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
++ --add-comments=TRANSLATORS: \
++ --files-from=$(srcdir)/POTFILES.in \
++ --copyright-holder='$(COPYRIGHT_HOLDER)' \
++ --package-name="$${package_prefix}@PACKAGE@" \
++ --package-version='@VERSION@' \
++ --msgid-bugs-address="$$msgid_bugs_address" \
++ $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
++ ;; \
++ esac
++ test ! -f $(DOMAIN).po || { \
++ if test -f $(srcdir)/$(DOMAIN).pot-header; then \
++ sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \
++ cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \
++ rm -f $(DOMAIN).1po \
++ || exit 1; \
++ fi; \
++ if test -f $(srcdir)/$(DOMAIN).pot; then \
++ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
++ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
++ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
++ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
++ else \
++ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
++ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
++ fi; \
++ else \
++ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
++ fi; \
++ }
++
++# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
++# every "make" invocation, only create it when it is missing.
++# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
++$(srcdir)/$(DOMAIN).pot:
++ $(MAKE) $(DOMAIN).pot-update
++
++# This target rebuilds a PO file if $(DOMAIN).pot has changed.
++# Note that a PO file is not touched if it doesn't need to be changed.
++$(POFILES): $(POFILESDEPS)
++ @test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot
++ @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
++ if test -f "$(srcdir)/$${lang}.po"; then \
++ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
++ echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \
++ cd $(srcdir) \
++ && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
++ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
++ 0.1[6-7] | 0.1[6-7].*) \
++ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \
++ *) \
++ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \
++ esac; \
++ }; \
++ else \
++ $(MAKE) $${lang}.po-create; \
+ fi
+- cd $(srcdir) && rm -f stamp-cat-id && echo timestamp > stamp-cat-id
+
+
+ install: install-exec install-data
+ install-exec:
+ install-data: install-data-@USE_NLS@
+-install-data-no: all
+-install-data-yes: all
+- if test -r $(MKINSTALLDIRS); then \
+- $(MKINSTALLDIRS) $(datadir); \
++ if test "$(PACKAGE)" = "gettext-tools"; then \
++ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
++ for file in $(DISTFILES.common) Makevars.template; do \
++ $(INSTALL_DATA) $(srcdir)/$$file \
++ $(DESTDIR)$(gettextsrcdir)/$$file; \
++ done; \
++ for file in Makevars; do \
++ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
++ done; \
+ else \
+- $(top_srcdir)/mkinstalldirs $(datadir); \
++ : ; \
+ fi
++install-data-no: all
++install-data-yes: all
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+- case "$$cat" in \
+- *.gmo) destdir=$(gnulocaledir);; \
+- *) destdir=$(localedir);; \
+- esac; \
+- lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
+- dir=$$destdir/$$lang/LC_MESSAGES; \
+- if test -r $(MKINSTALLDIRS); then \
+- $(MKINSTALLDIRS) $$dir; \
+- else \
+- $(top_srcdir)/mkinstalldirs $$dir; \
+- fi; \
+- if test -r $$cat; then \
+- $(INSTALL_DATA) $$cat $$dir/$(PACKAGE)$(INSTOBJEXT); \
+- echo "installing $$cat as $$dir/$(PACKAGE)$(INSTOBJEXT)"; \
+- else \
+- $(INSTALL_DATA) $(srcdir)/$$cat $$dir/$(PACKAGE)$(INSTOBJEXT); \
+- echo "installing $(srcdir)/$$cat as" \
+- "$$dir/$(PACKAGE)$(INSTOBJEXT)"; \
+- fi; \
+- if test -r $$cat.m; then \
+- $(INSTALL_DATA) $$cat.m $$dir/$(PACKAGE)$(INSTOBJEXT).m; \
+- echo "installing $$cat.m as $$dir/$(PACKAGE)$(INSTOBJEXT).m"; \
+- else \
+- if test -r $(srcdir)/$$cat.m ; then \
+- $(INSTALL_DATA) $(srcdir)/$$cat.m \
+- $$dir/$(PACKAGE)$(INSTOBJEXT).m; \
+- echo "installing $(srcdir)/$$cat as" \
+- "$$dir/$(PACKAGE)$(INSTOBJEXT).m"; \
+- else \
+- true; \
++ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
++ dir=$(localedir)/$$lang/LC_MESSAGES; \
++ $(mkdir_p) $(DESTDIR)$$dir; \
++ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
++ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
++ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
++ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
++ if test -n "$$lc"; then \
++ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
++ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
++ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
++ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
++ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
++ for file in *; do \
++ if test -f $$file; then \
++ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
++ fi; \
++ done); \
++ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
++ else \
++ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
++ :; \
++ else \
++ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
++ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
++ fi; \
++ fi; \
++ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
++ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
++ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
++ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
++ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+ fi; \
+- fi; \
++ done; \
+ done
+- if test "$(PACKAGE)" = "gettext"; then \
+- if test -r $(MKINSTALLDIRS); then \
+- $(MKINSTALLDIRS) $(gettextsrcdir); \
+- else \
+- $(top_srcdir)/mkinstalldirs $(gettextsrcdir); \
+- fi; \
+- $(INSTALL_DATA) $(srcdir)/Makefile.in.in \
+- $(gettextsrcdir)/Makefile.in.in; \
++
++install-strip: install
++
++installdirs: installdirs-exec installdirs-data
++installdirs-exec:
++installdirs-data: installdirs-data-@USE_NLS@
++ if test "$(PACKAGE)" = "gettext-tools"; then \
++ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+ else \
+ : ; \
+ fi
++installdirs-data-no:
++installdirs-data-yes:
++ @catalogs='$(CATALOGS)'; \
++ for cat in $$catalogs; do \
++ cat=`basename $$cat`; \
++ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
++ dir=$(localedir)/$$lang/LC_MESSAGES; \
++ $(mkdir_p) $(DESTDIR)$$dir; \
++ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
++ if test -n "$$lc"; then \
++ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
++ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
++ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
++ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
++ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
++ for file in *; do \
++ if test -f $$file; then \
++ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
++ fi; \
++ done); \
++ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
++ else \
++ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
++ :; \
++ else \
++ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
++ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
++ fi; \
++ fi; \
++ fi; \
++ done; \
++ done
+
+ # Define this as empty until I found a useful application.
+ installcheck:
+
+-uninstall:
++uninstall: uninstall-exec uninstall-data
++uninstall-exec:
++uninstall-data: uninstall-data-@USE_NLS@
++ if test "$(PACKAGE)" = "gettext-tools"; then \
++ for file in $(DISTFILES.common) Makevars.template; do \
++ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
++ done; \
++ else \
++ : ; \
++ fi
++uninstall-data-no:
++uninstall-data-yes:
+ catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+- lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
+- rm -f $(localedir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT); \
+- rm -f $(localedir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT).m; \
+- rm -f $(gnulocaledir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT); \
+- rm -f $(gnulocaledir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT).m; \
++ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
++ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
++ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
++ done; \
+ done
+- rm -f $(gettextsrcdir)/po-Makefile.in.in
+
+ check: all
+
+-cat-id-tbl.o: ../intl/libgettext.h
++info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+-dvi info tags TAGS ID:
++install-dvi install-ps install-pdf install-html:
+
+ mostlyclean:
+- rm -f core core.* *.pox $(PACKAGE).po *.old.po cat-id-tbl.tmp
++ rm -f remove-potcdate.sed
++ rm -f $(srcdir)/stamp-poT
++ rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+ rm -fr *.o
+
+ clean: mostlyclean
+
+ distclean: clean
+- rm -f Makefile Makefile.in POTFILES *.mo *.msg *.cat *.cat.m
++ rm -f Makefile Makefile.in POTFILES
+
+ maintainer-clean: distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+- rm -f $(GMOFILES)
++ rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES)
+
+-distdir = ../$(PACKAGE)-$(VERSION)/$(subdir)
+-dist distdir: update-po $(DISTFILES)
++distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
++dist distdir:
++ test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS)
++ @$(MAKE) dist2
++# This is a separate target because 'update-po' must be executed before.
++dist2: $(srcdir)/stamp-po $(DISTFILES)
+ dists="$(DISTFILES)"; \
++ if test "$(PACKAGE)" = "gettext-tools"; then \
++ dists="$$dists Makevars.template"; \
++ fi; \
++ if test -f $(srcdir)/$(DOMAIN).pot; then \
++ dists="$$dists $(DOMAIN).pot stamp-po"; \
++ fi; \
++ if test -f $(srcdir)/ChangeLog; then \
++ dists="$$dists ChangeLog"; \
++ fi; \
++ for i in 0 1 2 3 4 5 6 7 8 9; do \
++ if test -f $(srcdir)/ChangeLog.$$i; then \
++ dists="$$dists ChangeLog.$$i"; \
++ fi; \
++ done; \
++ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+ for file in $$dists; do \
+- ln $(srcdir)/$$file $(distdir) 2> /dev/null \
+- || cp -p $(srcdir)/$$file $(distdir); \
++ if test -f $$file; then \
++ cp -p $$file $(distdir) || exit 1; \
++ else \
++ cp -p $(srcdir)/$$file $(distdir) || exit 1; \
++ fi; \
+ done
+
+ update-po: Makefile
+- $(MAKE) $(PACKAGE).pot
+- PATH=`pwd`/../src:$$PATH; \
++ $(MAKE) $(DOMAIN).pot-update
++ test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
++ $(MAKE) update-gmo
++
++# General rule for creating PO files.
++
++.nop.po-create:
++ @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
++ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
++ exit 1
++
++# General rule for updating PO files.
++
++.nop.po-update:
++ @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
++ if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \
++ tmpdir=`pwd`; \
++ echo "$$lang:"; \
++ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
++ echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+ cd $(srcdir); \
+- catalogs='$(CATALOGS)'; \
+- for cat in $$catalogs; do \
+- cat=`basename $$cat`; \
+- lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
+- mv $$lang.po $$lang.old.po; \
+- echo "$$lang:"; \
+- if $(MSGMERGE) $$lang.old.po $(PACKAGE).pot -o $$lang.po; then \
+- rm -f $$lang.old.po; \
++ if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
++ $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
++ 0.1[6-7] | 0.1[6-7].*) \
++ $(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
++ *) \
++ $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
++ esac; \
++ }; then \
++ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
++ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+- echo "msgmerge for $$cat failed!"; \
+- rm -f $$lang.po; \
+- mv $$lang.old.po $$lang.po; \
++ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
++ :; \
++ else \
++ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
++ exit 1; \
++ fi; \
+ fi; \
+- done
++ else \
++ echo "msgmerge for $$lang.po failed!" 1>&2; \
++ rm -f $$tmpdir/$$lang.new.po; \
++ fi
+
+-POTFILES: POTFILES.in
+- ( if test 'x$(srcdir)' != 'x.'; then \
+- posrcprefix='$(top_srcdir)/'; \
+- else \
+- posrcprefix="../"; \
+- fi; \
+- rm -f $@-t $@ \
+- && (sed -e '/^#/d' -e '/^[ ]*$$/d' \
+- -e "s@.*@ $$posrcprefix& \\\\@" < $(srcdir)/$@.in \
+- | sed -e '$$s/\\$$//') > $@-t \
+- && chmod a-w $@-t \
+- && mv $@-t $@ )
+-
+-Makefile: Makefile.in.in ../config.status POTFILES
+- cd .. \
+- && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
+- $(SHELL) ./config.status
++$(DUMMYPOFILES):
++
++update-gmo: Makefile $(GMOFILES)
++ @:
++
++# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
++# because execution permission bits may not work on the current file system.
++# Use @SHELL@, which is the shell determined by autoconf for the use by its
++# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
++Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
++ cd $(top_builddir) \
++ && @SHELL@ ./config.status $(subdir)/$@.in po-directories
++
++force:
+
+ # Tell versions [3.59,3.63) of GNU make not to export all variables.
+ # Otherwise a system limit (for SysV at least) may be exceeded.
+diff -uprN clean/lrzsz-0.12.20/po/Makevars lrzsz-0.12.20/po/Makevars
+--- clean/lrzsz-0.12.20/po/Makevars 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/po/Makevars 2019-11-25 18:09:52.000000000 +0000
+@@ -0,0 +1,78 @@
++# Makefile variables for PO directory in any package using GNU gettext.
++
++# Usually the message domain is the same as the package name.
++DOMAIN = $(PACKAGE)
++
++# These two variables depend on the location of this directory.
++subdir = po
++top_builddir = ..
++
++# These options get passed to xgettext.
++XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
++
++# This is the copyright holder that gets inserted into the header of the
++# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
++# package. (Note that the msgstr strings, extracted from the package's
++# sources, belong to the copyright holder of the package.) Translators are
++# expected to transfer the copyright for their translations to this person
++# or entity, or to disclaim their copyright. The empty string stands for
++# the public domain; in this case the translators are expected to disclaim
++# their copyright.
++COPYRIGHT_HOLDER = Free Software Foundation, Inc.
++
++# This tells whether or not to prepend "GNU " prefix to the package
++# name that gets inserted into the header of the $(DOMAIN).pot file.
++# Possible values are "yes", "no", or empty. If it is empty, try to
++# detect it automatically by scanning the files in $(top_srcdir) for
++# "GNU packagename" string.
++PACKAGE_GNU =
++
++# This is the email address or URL to which the translators shall report
++# bugs in the untranslated strings:
++# - Strings which are not entire sentences, see the maintainer guidelines
++# in the GNU gettext documentation, section 'Preparing Strings'.
++# - Strings which use unclear terms or require additional context to be
++# understood.
++# - Strings which make invalid assumptions about notation of date, time or
++# money.
++# - Pluralisation problems.
++# - Incorrect English spelling.
++# - Incorrect formatting.
++# It can be your email address, or a mailing list address where translators
++# can write to without being subscribed, or the URL of a web page through
++# which the translators can contact you.
++MSGID_BUGS_ADDRESS =
++
++# This is the list of locale categories, beyond LC_MESSAGES, for which the
++# message catalogs shall be used. It is usually empty.
++EXTRA_LOCALE_CATEGORIES =
++
++# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
++# context. Possible values are "yes" and "no". Set this to yes if the
++# package uses functions taking also a message context, like pgettext(), or
++# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
++USE_MSGCTXT = no
++
++# These options get passed to msgmerge.
++# Useful options are in particular:
++# --previous to keep previous msgids of translated messages,
++# --quiet to reduce the verbosity.
++MSGMERGE_OPTIONS =
++
++# These options get passed to msginit.
++# If you want to disable line wrapping when writing PO files, add
++# --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and
++# MSGINIT_OPTIONS.
++MSGINIT_OPTIONS =
++
++# This tells whether or not to regenerate a PO file when $(DOMAIN).pot
++# has changed. Possible values are "yes" and "no". Set this to no if
++# the POT file is checked in the repository and the version control
++# program ignores timestamps.
++PO_DEPENDS_ON_POT = yes
++
++# This tells whether or not to forcibly update $(DOMAIN).pot and
++# regenerate PO files on "make dist". Possible values are "yes" and
++# "no". Set this to no if the POT file and PO files are maintained
++# externally.
++DIST_DEPENDS_ON_UPDATE_PO = yes
+diff -uprN clean/lrzsz-0.12.20/po/quot.sed lrzsz-0.12.20/po/quot.sed
+--- clean/lrzsz-0.12.20/po/quot.sed 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/po/quot.sed 2019-11-25 18:21:17.000000000 +0000
+@@ -0,0 +1,6 @@
++s/"\([^"]*\)"/“\1â€/g
++s/`\([^`']*\)'/‘\1’/g
++s/ '\([^`']*\)' / ‘\1’ /g
++s/ '\([^`']*\)'$/ ‘\1’/g
++s/^'\([^`']*\)' /‘\1’ /g
++s/“â€/""/g
+diff -uprN clean/lrzsz-0.12.20/po/remove-potcdate.sin lrzsz-0.12.20/po/remove-potcdate.sin
+--- clean/lrzsz-0.12.20/po/remove-potcdate.sin 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/po/remove-potcdate.sin 2019-11-25 18:21:17.000000000 +0000
+@@ -0,0 +1,25 @@
++# Sed script that removes the POT-Creation-Date line in the header entry
++# from a POT file.
++#
++# Copyright (C) 2002 Free Software Foundation, Inc.
++# Copying and distribution of this file, with or without modification,
++# are permitted in any medium without royalty provided the copyright
++# notice and this notice are preserved. This file is offered as-is,
++# without any warranty.
++#
++# The distinction between the first and the following occurrences of the
++# pattern is achieved by looking at the hold space.
++/^"POT-Creation-Date: .*"$/{
++x
++# Test if the hold space is empty.
++s/P/P/
++ta
++# Yes it was empty. First occurrence. Remove the line.
++g
++d
++bb
++:a
++# The hold space was nonempty. Following occurrences. Do nothing.
++x
++:b
++}
+diff -uprN clean/lrzsz-0.12.20/po/Rules-quot lrzsz-0.12.20/po/Rules-quot
+--- clean/lrzsz-0.12.20/po/Rules-quot 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/po/Rules-quot 2019-11-25 18:21:17.000000000 +0000
+@@ -0,0 +1,62 @@
++# Special Makefile rules for English message catalogs with quotation marks.
++#
++# Copyright (C) 2001-2017 Free Software Foundation, Inc.
++# This file, Rules-quot, and its auxiliary files (listed under
++# DISTFILES.common.extra1) are free software; the Free Software Foundation
++# gives unlimited permission to use, copy, distribute, and modify them.
++
++DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
++
++.SUFFIXES: .insert-header .po-update-en
++
++en@quot.po-create:
++ $(MAKE) en@quot.po-update
++en@boldquot.po-create:
++ $(MAKE) en@boldquot.po-update
++
++en@quot.po-update: en@quot.po-update-en
++en@boldquot.po-update: en@boldquot.po-update-en
++
++.insert-header.po-update-en:
++ @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
++ if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
++ tmpdir=`pwd`; \
++ echo "$$lang:"; \
++ ll=`echo $$lang | sed -e 's/@.*//'`; \
++ LC_ALL=C; export LC_ALL; \
++ cd $(srcdir); \
++ if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \
++ | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \
++ { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \
++ $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \
++ ;; \
++ *) \
++ $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \
++ ;; \
++ esac } 2>/dev/null > $$tmpdir/$$lang.new.po \
++ ; then \
++ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
++ rm -f $$tmpdir/$$lang.new.po; \
++ else \
++ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
++ :; \
++ else \
++ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
++ exit 1; \
++ fi; \
++ fi; \
++ else \
++ echo "creation of $$lang.po failed!" 1>&2; \
++ rm -f $$tmpdir/$$lang.new.po; \
++ fi
++
++en@quot.insert-header: insert-header.sin
++ sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
++
++en@boldquot.insert-header: insert-header.sin
++ sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
++
++mostlyclean: mostlyclean-quot
++mostlyclean-quot:
++ rm -f *.insert-header
+diff -uprN clean/lrzsz-0.12.20/po/stamp-cat-id lrzsz-0.12.20/po/stamp-cat-id
+--- clean/lrzsz-0.12.20/po/stamp-cat-id 1998-12-30 07:50:01.000000000 +0000
++++ lrzsz-0.12.20/po/stamp-cat-id 1970-01-01 01:00:00.000000000 +0100
+@@ -1 +0,0 @@
+-timestamp
+diff -uprN clean/lrzsz-0.12.20/po/stamp-po lrzsz-0.12.20/po/stamp-po
+--- clean/lrzsz-0.12.20/po/stamp-po 1970-01-01 01:00:00.000000000 +0100
++++ lrzsz-0.12.20/po/stamp-po 2019-11-26 11:42:09.000000000 +0000
+@@ -0,0 +1 @@
++timestamp
+diff -uprN clean/lrzsz-0.12.20/src/Makefile.am lrzsz-0.12.20/src/Makefile.am
+--- clean/lrzsz-0.12.20/src/Makefile.am 1998-12-28 08:38:47.000000000 +0000
++++ lrzsz-0.12.20/src/Makefile.am 2019-11-25 16:22:49.000000000 +0000
+@@ -2,13 +2,11 @@ bin_PROGRAMS=lrz lsz
+ lrz_SOURCES=lrz.c timing.c zperr.c zreadline.c crctab.c rbsb.c zm.c protname.c tcp.c lsyslog.c canit.c
+ lsz_SOURCES=lsz.c timing.c zperr.c zreadline.c crctab.c rbsb.c zm.c protname.c tcp.c lsyslog.c canit.c
+ noinst_HEADERS = timing.h zglobal.h zmodem.h
+-datadir = $(prefix)/@DATADIRNAME@
++datadir = $(prefix)/share
+ localedir = $(datadir)/locale
+-CFLAGS=@CFLAGS@
+ DISTCLEAN_FILES=lrzszbug
+
+-LDADD = ../lib/libzmodem.a @INTLLIBS@
+-AUTOMAKE_OPTIONS=ansi2knr
++LDADD = ../lib/libzmodem.a @LIBINTL@
+ EXTRA_DIST = ansi2knr.1 ansi2knr.c lrzszbug.in
+ INCLUDES = -I.. -I$(srcdir) -I$(top_srcdir)/src -I../intl -I$(top_srcdir)/lib
+ #DEFS = -DLOCALEDIR=\"$(localedir)\" -DOS=\"@host_os@\" -DCPU=\"@host_cpu@\"
+diff -uprN clean/lrzsz-0.12.20/src/Makefile.in lrzsz-0.12.20/src/Makefile.in
+--- clean/lrzsz-0.12.20/src/Makefile.in 1998-12-30 16:31:46.000000000 +0000
++++ lrzsz-0.12.20/src/Makefile.in 2019-11-26 11:37:46.000000000 +0000
+@@ -1,6 +1,8 @@
+-# Makefile.in generated automatically by automake 1.3 from Makefile.am
++# Makefile.in generated by automake 1.16.1 from Makefile.am.
++# @configure_input@
++
++# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -10,362 +12,659 @@
+ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+
++@SET_MAKE@
+
+-SHELL = /bin/sh
+
+-srcdir = @srcdir@
+-top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+-prefix = @prefix@
+-exec_prefix = @exec_prefix@
+-
+-bindir = @bindir@
+-sbindir = @sbindir@
+-libexecdir = @libexecdir@
+-sysconfdir = @sysconfdir@
+-sharedstatedir = @sharedstatedir@
+-localstatedir = @localstatedir@
+-libdir = @libdir@
+-infodir = @infodir@
+-mandir = @mandir@
+-includedir = @includedir@
+-oldincludedir = /usr/include
+-
+-DISTDIR =
+-
++am__is_gnu_make = { \
++ if test -z '$(MAKELEVEL)'; then \
++ false; \
++ elif test -n '$(MAKE_HOST)'; then \
++ true; \
++ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
++ true; \
++ else \
++ false; \
++ fi; \
++}
++am__make_running_with_option = \
++ case $${target_option-} in \
++ ?) ;; \
++ *) echo "am__make_running_with_option: internal error: invalid" \
++ "target option '$${target_option-}' specified" >&2; \
++ exit 1;; \
++ esac; \
++ has_opt=no; \
++ sane_makeflags=$$MAKEFLAGS; \
++ if $(am__is_gnu_make); then \
++ sane_makeflags=$$MFLAGS; \
++ else \
++ case $$MAKEFLAGS in \
++ *\\[\ \ ]*) \
++ bs=\\; \
++ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
++ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
++ esac; \
++ fi; \
++ skip_next=no; \
++ strip_trailopt () \
++ { \
++ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
++ }; \
++ for flg in $$sane_makeflags; do \
++ test $$skip_next = yes && { skip_next=no; continue; }; \
++ case $$flg in \
++ *=*|--*) continue;; \
++ -*I) strip_trailopt 'I'; skip_next=yes;; \
++ -*I?*) strip_trailopt 'I';; \
++ -*O) strip_trailopt 'O'; skip_next=yes;; \
++ -*O?*) strip_trailopt 'O';; \
++ -*l) strip_trailopt 'l'; skip_next=yes;; \
++ -*l?*) strip_trailopt 'l';; \
++ -[dEDm]) skip_next=yes;; \
++ -[JT]) skip_next=yes;; \
++ esac; \
++ case $$flg in \
++ *$$target_option*) has_opt=yes; break;; \
++ esac; \
++ done; \
++ test $$has_opt = yes
++am__make_dryrun = (target_option=n; $(am__make_running_with_option))
++am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+ pkgdatadir = $(datadir)/@PACKAGE@
+-pkglibdir = $(libdir)/@PACKAGE@
+ pkgincludedir = $(includedir)/@PACKAGE@
+-
+-top_builddir = ..
+-
+-ACLOCAL = @ACLOCAL@
+-AUTOCONF = @AUTOCONF@
+-AUTOMAKE = @AUTOMAKE@
+-AUTOHEADER = @AUTOHEADER@
+-
+-INSTALL = @INSTALL@
+-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+-INSTALL_DATA = @INSTALL_DATA@
+-INSTALL_SCRIPT = @INSTALL_SCRIPT@
+-transform = @program_transform_name@
+-
++pkglibdir = $(libdir)/@PACKAGE@
++pkglibexecdir = $(libexecdir)/@PACKAGE@
++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
++install_sh_DATA = $(install_sh) -c -m 644
++install_sh_PROGRAM = $(install_sh) -c
++install_sh_SCRIPT = $(install_sh) -c
++INSTALL_HEADER = $(INSTALL_DATA)
++transform = $(program_transform_name)
+ NORMAL_INSTALL = :
+ PRE_INSTALL = :
+ POST_INSTALL = :
+ NORMAL_UNINSTALL = :
+ PRE_UNINSTALL = :
+ POST_UNINSTALL = :
+-CATALOGS = @CATALOGS@
+-CATOBJEXT = @CATOBJEXT@
++build_triplet = @build@
++host_triplet = @host@
++bin_PROGRAMS = lrz$(EXEEXT) lsz$(EXEEXT)
++subdir = src
++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
++am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
++ $(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
++ $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
++ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
++ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
++ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
++ $(top_srcdir)/configure.in
++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
++ $(ACLOCAL_M4)
++DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \
++ $(am__DIST_COMMON)
++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
++CONFIG_HEADER = $(top_builddir)/config.h
++CONFIG_CLEAN_FILES = lrzszbug
++CONFIG_CLEAN_VPATH_FILES =
++am__installdirs = "$(DESTDIR)$(bindir)"
++PROGRAMS = $(bin_PROGRAMS)
++am_lrz_OBJECTS = lrz.$(OBJEXT) timing.$(OBJEXT) zperr.$(OBJEXT) \
++ zreadline.$(OBJEXT) crctab.$(OBJEXT) rbsb.$(OBJEXT) \
++ zm.$(OBJEXT) protname.$(OBJEXT) tcp.$(OBJEXT) \
++ lsyslog.$(OBJEXT) canit.$(OBJEXT)
++lrz_OBJECTS = $(am_lrz_OBJECTS)
++lrz_LDADD = $(LDADD)
++lrz_DEPENDENCIES = ../lib/libzmodem.a
++am_lsz_OBJECTS = lsz.$(OBJEXT) timing.$(OBJEXT) zperr.$(OBJEXT) \
++ zreadline.$(OBJEXT) crctab.$(OBJEXT) rbsb.$(OBJEXT) \
++ zm.$(OBJEXT) protname.$(OBJEXT) tcp.$(OBJEXT) \
++ lsyslog.$(OBJEXT) canit.$(OBJEXT)
++lsz_OBJECTS = $(am_lsz_OBJECTS)
++lsz_LDADD = $(LDADD)
++lsz_DEPENDENCIES = ../lib/libzmodem.a
++AM_V_P = $(am__v_P_@AM_V@)
++am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
++am__v_P_0 = false
++am__v_P_1 = :
++AM_V_GEN = $(am__v_GEN_@AM_V@)
++am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
++am__v_GEN_0 = @echo " GEN " $@;
++am__v_GEN_1 =
++AM_V_at = $(am__v_at_@AM_V@)
++am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
++am__v_at_0 = @
++am__v_at_1 =
++DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
++depcomp = $(SHELL) $(top_srcdir)/depcomp
++am__maybe_remake_depfiles = depfiles
++am__depfiles_remade = ./$(DEPDIR)/canit.Po ./$(DEPDIR)/crctab.Po \
++ ./$(DEPDIR)/lrz.Po ./$(DEPDIR)/lsyslog.Po ./$(DEPDIR)/lsz.Po \
++ ./$(DEPDIR)/protname.Po ./$(DEPDIR)/rbsb.Po ./$(DEPDIR)/tcp.Po \
++ ./$(DEPDIR)/timing.Po ./$(DEPDIR)/zm.Po ./$(DEPDIR)/zperr.Po \
++ ./$(DEPDIR)/zreadline.Po
++am__mv = mv -f
++COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
++ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
++AM_V_CC = $(am__v_CC_@AM_V@)
++am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
++am__v_CC_0 = @echo " CC " $@;
++am__v_CC_1 =
++CCLD = $(CC)
++LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
++AM_V_CCLD = $(am__v_CCLD_@AM_V@)
++am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
++am__v_CCLD_0 = @echo " CCLD " $@;
++am__v_CCLD_1 =
++SOURCES = $(lrz_SOURCES) $(lsz_SOURCES)
++DIST_SOURCES = $(lrz_SOURCES) $(lsz_SOURCES)
++am__can_run_installinfo = \
++ case $$AM_UPDATE_INFO_DIR in \
++ n|no|NO) false;; \
++ *) (install-info --version) >/dev/null 2>&1;; \
++ esac
++HEADERS = $(noinst_HEADERS)
++am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
++# Read a list of newline-separated strings from the standard input,
++# and print each of them once, without duplicates. Input order is
++# *not* preserved.
++am__uniquify_input = $(AWK) '\
++ BEGIN { nonempty = 0; } \
++ { items[$$0] = 1; nonempty = 1; } \
++ END { if (nonempty) { for (i in items) print i; }; } \
++'
++# Make sure the list of sources is unique. This is necessary because,
++# e.g., the same source file might be shared among _SOURCES variables
++# for different programs/libraries.
++am__define_uniq_tagged_files = \
++ list='$(am__tagged_files)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | $(am__uniquify_input)`
++ETAGS = etags
++CTAGS = ctags
++am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/lrzszbug.in \
++ $(top_srcdir)/depcomp $(top_srcdir)/mkinstalldirs
++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
++ACLOCAL = @ACLOCAL@
++ALLOCA = @ALLOCA@
++AMTAR = @AMTAR@
++AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
++AUTOCONF = @AUTOCONF@
++AUTOHEADER = @AUTOHEADER@
++AUTOMAKE = @AUTOMAKE@
++AWK = @AWK@
+ CC = @CC@
++CCDEPMODE = @CCDEPMODE@
++CFLAGS = @CFLAGS@
+ CPP = @CPP@
+-DATADIRNAME = @DATADIRNAME@
++CPPFLAGS = @CPPFLAGS@
++CYGPATH_W = @CYGPATH_W@
++#DEFS = -DLOCALEDIR=\"$(localedir)\" -DOS=\"@host_os@\" -DCPU=\"@host_cpu@\"
++DEFS = -DNFGVMIN @DEFS@ -DLOCALEDIR=\"$(localedir)\"
++DEPDIR = @DEPDIR@
++ECHO_C = @ECHO_C@
++ECHO_N = @ECHO_N@
++ECHO_T = @ECHO_T@
++EGREP = @EGREP@
+ ENABLE_TIMESYNC = @ENABLE_TIMESYNC@
+-GENCAT = @GENCAT@
+-GMOFILES = @GMOFILES@
++EXEEXT = @EXEEXT@
++GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+ GMSGFMT = @GMSGFMT@
+-GT_NO = @GT_NO@
+-GT_YES = @GT_YES@
+-INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
+-INSTOBJEXT = @INSTOBJEXT@
+-INTLDEPS = @INTLDEPS@
++GMSGFMT_015 = @GMSGFMT_015@
++GREP = @GREP@
++INSTALL = @INSTALL@
++INSTALL_DATA = @INSTALL_DATA@
++INSTALL_PROGRAM = @INSTALL_PROGRAM@
++INSTALL_SCRIPT = @INSTALL_SCRIPT@
++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+ INTLLIBS = @INTLLIBS@
+-INTLOBJS = @INTLOBJS@
++INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+ LDFLAGS = @LDFLAGS@
++LIBICONV = @LIBICONV@
++LIBINTL = @LIBINTL@
+ LIBOBJS = @LIBOBJS@
+ LIBS = @LIBS@
++LTLIBICONV = @LTLIBICONV@
++LTLIBINTL = @LTLIBINTL@
++LTLIBOBJS = @LTLIBOBJS@
+ MAKEINFO = @MAKEINFO@
+-MKINSTALLDIRS = @MKINSTALLDIRS@
++MKDIR_P = @MKDIR_P@
+ MSGFMT = @MSGFMT@
++MSGMERGE = @MSGMERGE@
++MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
++OBJEXT = @OBJEXT@
+ PACKAGE = @PACKAGE@
++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
++PACKAGE_NAME = @PACKAGE_NAME@
++PACKAGE_STRING = @PACKAGE_STRING@
++PACKAGE_TARNAME = @PACKAGE_TARNAME@
++PACKAGE_URL = @PACKAGE_URL@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
+-POFILES = @POFILES@
++PATH_SEPARATOR = @PATH_SEPARATOR@
+ POSUB = @POSUB@
+ RANLIB = @RANLIB@
+-U = @U@
+-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
++SED = @SED@
++SET_MAKE = @SET_MAKE@
++SHELL = @SHELL@
++STRIP = @STRIP@
+ USE_NLS = @USE_NLS@
+ VERSION = @VERSION@
+-l = @l@
+-
+-bin_PROGRAMS=lrz lsz
+-lrz_SOURCES=lrz.c timing.c zperr.c zreadline.c crctab.c rbsb.c zm.c protname.c tcp.c lsyslog.c canit.c
+-lsz_SOURCES=lsz.c timing.c zperr.c zreadline.c crctab.c rbsb.c zm.c protname.c tcp.c lsyslog.c canit.c
+-noinst_HEADERS = timing.h zglobal.h zmodem.h
+-datadir = $(prefix)/@DATADIRNAME@
++XGETTEXT = @XGETTEXT@
++XGETTEXT_015 = @XGETTEXT_015@
++XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
++abs_builddir = @abs_builddir@
++abs_srcdir = @abs_srcdir@
++abs_top_builddir = @abs_top_builddir@
++abs_top_srcdir = @abs_top_srcdir@
++ac_ct_CC = @ac_ct_CC@
++am__include = @am__include@
++am__leading_dot = @am__leading_dot@
++am__quote = @am__quote@
++am__tar = @am__tar@
++am__untar = @am__untar@
++bindir = @bindir@
++build = @build@
++build_alias = @build_alias@
++build_cpu = @build_cpu@
++build_os = @build_os@
++build_vendor = @build_vendor@
++builddir = @builddir@
++datadir = $(prefix)/share
++datarootdir = @datarootdir@
++docdir = @docdir@
++dvidir = @dvidir@
++exec_prefix = @exec_prefix@
++host = @host@
++host_alias = @host_alias@
++host_cpu = @host_cpu@
++host_os = @host_os@
++host_vendor = @host_vendor@
++htmldir = @htmldir@
++includedir = @includedir@
++infodir = @infodir@
++install_sh = @install_sh@
++libdir = @libdir@
++libexecdir = @libexecdir@
+ localedir = $(datadir)/locale
+-CFLAGS=@CFLAGS@
+-DISTCLEAN_FILES=lrzszbug
+-
+-LDADD = ../lib/libzmodem.a @INTLLIBS@
+-AUTOMAKE_OPTIONS=ansi2knr
++localstatedir = @localstatedir@
++mandir = @mandir@
++mkdir_p = @mkdir_p@
++oldincludedir = @oldincludedir@
++pdfdir = @pdfdir@
++prefix = @prefix@
++program_transform_name = @program_transform_name@
++psdir = @psdir@
++sbindir = @sbindir@
++sharedstatedir = @sharedstatedir@
++srcdir = @srcdir@
++sysconfdir = @sysconfdir@
++target_alias = @target_alias@
++top_build_prefix = @top_build_prefix@
++top_builddir = @top_builddir@
++top_srcdir = @top_srcdir@
++lrz_SOURCES = lrz.c timing.c zperr.c zreadline.c crctab.c rbsb.c zm.c protname.c tcp.c lsyslog.c canit.c
++lsz_SOURCES = lsz.c timing.c zperr.c zreadline.c crctab.c rbsb.c zm.c protname.c tcp.c lsyslog.c canit.c
++noinst_HEADERS = timing.h zglobal.h zmodem.h
++DISTCLEAN_FILES = lrzszbug
++LDADD = ../lib/libzmodem.a @LIBINTL@
+ EXTRA_DIST = ansi2knr.1 ansi2knr.c lrzszbug.in
+ INCLUDES = -I.. -I$(srcdir) -I$(top_srcdir)/src -I../intl -I$(top_srcdir)/lib
+-#DEFS = -DLOCALEDIR=\"$(localedir)\" -DOS=\"@host_os@\" -DCPU=\"@host_cpu@\"
+-DEFS = -DNFGVMIN @DEFS@ -DLOCALEDIR=\"$(localedir)\"
+-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+-CONFIG_HEADER = ../config.h
+-CONFIG_CLEAN_FILES = lrzszbug
+-PROGRAMS = $(bin_PROGRAMS)
++all: all-am
+
+-CPPFLAGS = @CPPFLAGS@
+-ANSI2KNR = @ANSI2KNR@
+-lrz_OBJECTS = lrz$U.o timing$U.o zperr$U.o zreadline$U.o crctab$U.o \
+-rbsb$U.o zm$U.o protname$U.o tcp$U.o lsyslog$U.o canit$U.o
+-lrz_LDADD = $(LDADD)
+-lrz_DEPENDENCIES = ../lib/libzmodem.a
+-lrz_LDFLAGS =
+-lsz_OBJECTS = lsz$U.o timing$U.o zperr$U.o zreadline$U.o crctab$U.o \
+-rbsb$U.o zm$U.o protname$U.o tcp$U.o lsyslog$U.o canit$U.o
+-lsz_LDADD = $(LDADD)
+-lsz_DEPENDENCIES = ../lib/libzmodem.a
+-lsz_LDFLAGS =
+-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+-LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+-HEADERS = $(noinst_HEADERS)
++.SUFFIXES:
++.SUFFIXES: .c .o .obj
++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
++ @for dep in $?; do \
++ case '$(am__configure_deps)' in \
++ *$$dep*) \
++ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
++ && { if test -f $@; then exit 0; else break; fi; }; \
++ exit 1;; \
++ esac; \
++ done; \
++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
++ $(am__cd) $(top_srcdir) && \
++ $(AUTOMAKE) --gnu src/Makefile
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++ @case '$?' in \
++ *config.status*) \
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
++ *) \
++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
++ esac;
++
++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
++
++$(top_srcdir)/configure: $(am__configure_deps)
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
++$(ACLOCAL_M4): $(am__aclocal_m4_deps)
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
++$(am__aclocal_m4_deps):
++lrzszbug: $(top_builddir)/config.status $(srcdir)/lrzszbug.in
++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
++install-binPROGRAMS: $(bin_PROGRAMS)
++ @$(NORMAL_INSTALL)
++ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
++ if test -n "$$list"; then \
++ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
++ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
++ fi; \
++ for p in $$list; do echo "$$p $$p"; done | \
++ sed 's/$(EXEEXT)$$//' | \
++ while read p p1; do if test -f $$p \
++ ; then echo "$$p"; echo "$$p"; else :; fi; \
++ done | \
++ sed -e 'p;s,.*/,,;n;h' \
++ -e 's|.*|.|' \
++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
++ sed 'N;N;N;s,\n, ,g' | \
++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
++ if ($$2 == $$4) files[d] = files[d] " " $$1; \
++ else { print "f", $$3 "/" $$4, $$1; } } \
++ END { for (d in files) print "f", d, files[d] }' | \
++ while read type dir files; do \
++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
++ test -z "$$files" || { \
++ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
++ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
++ } \
++ ; done
+
+-DIST_COMMON = Makefile.am Makefile.in ansi2knr.1 ansi2knr.c lrzszbug.in
++uninstall-binPROGRAMS:
++ @$(NORMAL_UNINSTALL)
++ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
++ files=`for p in $$list; do echo "$$p"; done | \
++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
++ -e 's/$$/$(EXEEXT)/' \
++ `; \
++ test -n "$$list" || exit 0; \
++ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
++ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
++clean-binPROGRAMS:
++ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
++lrz$(EXEEXT): $(lrz_OBJECTS) $(lrz_DEPENDENCIES) $(EXTRA_lrz_DEPENDENCIES)
++ @rm -f lrz$(EXEEXT)
++ $(AM_V_CCLD)$(LINK) $(lrz_OBJECTS) $(lrz_LDADD) $(LIBS)
++
++lsz$(EXEEXT): $(lsz_OBJECTS) $(lsz_DEPENDENCIES) $(EXTRA_lsz_DEPENDENCIES)
++ @rm -f lsz$(EXEEXT)
++ $(AM_V_CCLD)$(LINK) $(lsz_OBJECTS) $(lsz_LDADD) $(LIBS)
+
+-TAR = tar
+-GZIP = --best
+-SOURCES = $(lrz_SOURCES) $(lsz_SOURCES)
+-OBJECTS = $(lrz_OBJECTS) $(lsz_OBJECTS)
++mostlyclean-compile:
++ -rm -f *.$(OBJEXT)
+
+-all: Makefile $(ANSI2KNR) $(PROGRAMS) $(HEADERS)
++distclean-compile:
++ -rm -f *.tab.c
+
+-.SUFFIXES:
+-.SUFFIXES: .S .c .o .s
+-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/Makefile
+-
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+- cd $(top_builddir) \
+- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/canit.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crctab.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lrz.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lsyslog.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lsz.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/protname.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rbsb.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tcp.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/timing.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zm.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zperr.Po@am__quote@ # am--include-marker
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zreadline.Po@am__quote@ # am--include-marker
++
++$(am__depfiles_remade):
++ @$(MKDIR_P) $(@D)
++ @echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+-lrzszbug: $(top_builddir)/config.status lrzszbug.in
+- cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= ./config.status
++am--depfiles: $(am__depfiles_remade)
+
+-mostlyclean-binPROGRAMS:
++.c.o:
++@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
++@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
++
++.c.obj:
++@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
++@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
++
++ID: $(am__tagged_files)
++ $(am__define_uniq_tagged_files); mkid -fID $$unique
++tags: tags-am
++TAGS: tags
+
+-clean-binPROGRAMS:
+- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
++tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
++ set x; \
++ here=`pwd`; \
++ $(am__define_uniq_tagged_files); \
++ shift; \
++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
++ test -n "$$unique" || unique=$$empty_fix; \
++ if test $$# -gt 0; then \
++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++ "$$@" $$unique; \
++ else \
++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++ $$unique; \
++ fi; \
++ fi
++ctags: ctags-am
++
++CTAGS: ctags
++ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
++ $(am__define_uniq_tagged_files); \
++ test -z "$(CTAGS_ARGS)$$unique" \
++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
++ $$unique
++
++GTAGS:
++ here=`$(am__cd) $(top_builddir) && pwd` \
++ && $(am__cd) $(top_srcdir) \
++ && gtags -i $(GTAGS_ARGS) "$$here"
++cscopelist: cscopelist-am
++
++cscopelist-am: $(am__tagged_files)
++ list='$(am__tagged_files)'; \
++ case "$(srcdir)" in \
++ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
++ *) sdir=$(subdir)/$(srcdir) ;; \
++ esac; \
++ for i in $$list; do \
++ if test -f "$$i"; then \
++ echo "$(subdir)/$$i"; \
++ else \
++ echo "$$sdir/$$i"; \
++ fi; \
++ done >> $(top_builddir)/cscope.files
+
+-distclean-binPROGRAMS:
++distclean-tags:
++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+-maintainer-clean-binPROGRAMS:
++distdir: $(BUILT_SOURCES)
++ $(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+-install-binPROGRAMS: $(bin_PROGRAMS)
+- @$(NORMAL_INSTALL)
+- $(mkinstalldirs) $(DESTDIR)$(bindir)
+- @list='$(bin_PROGRAMS)'; for p in $$list; do \
+- if test -f $$p; then \
+- echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`"; \
+- $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
+- else :; fi; \
++distdir-am: $(DISTFILES)
++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ list='$(DISTFILES)'; \
++ dist_files=`for file in $$list; do echo $$file; done | \
++ sed -e "s|^$$srcdirstrip/||;t" \
++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
++ case $$dist_files in \
++ */*) $(MKDIR_P) `echo "$$dist_files" | \
++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
++ sort -u` ;; \
++ esac; \
++ for file in $$dist_files; do \
++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
++ if test -d $$d/$$file; then \
++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
++ if test -d "$(distdir)/$$file"; then \
++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++ fi; \
++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++ fi; \
++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
++ else \
++ test -f "$(distdir)/$$file" \
++ || cp -p $$d/$$file "$(distdir)/$$file" \
++ || exit 1; \
++ fi; \
+ done
+-
+-uninstall-binPROGRAMS:
+- @$(NORMAL_UNINSTALL)
+- list='$(bin_PROGRAMS)'; for p in $$list; do \
+- rm -f $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
++check-am: all-am
++check: check-am
++all-am: Makefile $(PROGRAMS) $(HEADERS)
++installdirs:
++ for dir in "$(DESTDIR)$(bindir)"; do \
++ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
++install: install-am
++install-exec: install-exec-am
++install-data: install-data-am
++uninstall: uninstall-am
+
+-.c.o:
+- $(COMPILE) -c $<
++install-am: all-am
++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
++
++installcheck: installcheck-am
++install-strip:
++ if test -z '$(STRIP)'; then \
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ install; \
++ else \
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
++ fi
++mostlyclean-generic:
+
+-.s.o:
+- $(COMPILE) -c $<
++clean-generic:
+
+-.S.o:
+- $(COMPILE) -c $<
++distclean-generic:
++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+-mostlyclean-compile:
+- -rm -f *.o core *.core
++maintainer-clean-generic:
++ @echo "This command is intended for maintainers to use"
++ @echo "it deletes files that may require special tools to rebuild."
++clean: clean-am
+
+-clean-compile:
++clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+-distclean-compile:
+- -rm -f *.tab.c
++distclean: distclean-am
++ -rm -f ./$(DEPDIR)/canit.Po
++ -rm -f ./$(DEPDIR)/crctab.Po
++ -rm -f ./$(DEPDIR)/lrz.Po
++ -rm -f ./$(DEPDIR)/lsyslog.Po
++ -rm -f ./$(DEPDIR)/lsz.Po
++ -rm -f ./$(DEPDIR)/protname.Po
++ -rm -f ./$(DEPDIR)/rbsb.Po
++ -rm -f ./$(DEPDIR)/tcp.Po
++ -rm -f ./$(DEPDIR)/timing.Po
++ -rm -f ./$(DEPDIR)/zm.Po
++ -rm -f ./$(DEPDIR)/zperr.Po
++ -rm -f ./$(DEPDIR)/zreadline.Po
++ -rm -f Makefile
++distclean-am: clean-am distclean-compile distclean-generic \
++ distclean-tags
+
+-maintainer-clean-compile:
++dvi: dvi-am
+
+-mostlyclean-krextra:
++dvi-am:
+
+-clean-krextra:
+- -rm -f ansi2knr
++html: html-am
+
+-distclean-krextra:
++html-am:
+
+-maintainer-clean-krextra:
+-ansi2knr: ansi2knr.o
+- $(LINK) ansi2knr.o $(LIBS)
+-ansi2knr.o: $(CONFIG_HEADER)
+-
+-
+-mostlyclean-kr:
+- -rm -f *_.c
+-
+-clean-kr:
+-
+-distclean-kr:
+-
+-maintainer-clean-kr:
+-
+-lrz: $(lrz_OBJECTS) $(lrz_DEPENDENCIES)
+- @rm -f lrz
+- $(LINK) $(lrz_LDFLAGS) $(lrz_OBJECTS) $(lrz_LDADD) $(LIBS)
+-
+-lsz: $(lsz_OBJECTS) $(lsz_DEPENDENCIES)
+- @rm -f lsz
+- $(LINK) $(lsz_LDFLAGS) $(lsz_OBJECTS) $(lsz_LDADD) $(LIBS)
+-canit_.c: canit.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/canit.c; then echo $(srcdir)/canit.c; else echo canit.c; fi` | $(ANSI2KNR) canit_.c
+-crctab_.c: crctab.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/crctab.c; then echo $(srcdir)/crctab.c; else echo crctab.c; fi` | $(ANSI2KNR) crctab_.c
+-lrz_.c: lrz.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/lrz.c; then echo $(srcdir)/lrz.c; else echo lrz.c; fi` | $(ANSI2KNR) lrz_.c
+-lsyslog_.c: lsyslog.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/lsyslog.c; then echo $(srcdir)/lsyslog.c; else echo lsyslog.c; fi` | $(ANSI2KNR) lsyslog_.c
+-lsz_.c: lsz.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/lsz.c; then echo $(srcdir)/lsz.c; else echo lsz.c; fi` | $(ANSI2KNR) lsz_.c
+-protname_.c: protname.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/protname.c; then echo $(srcdir)/protname.c; else echo protname.c; fi` | $(ANSI2KNR) protname_.c
+-rbsb_.c: rbsb.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/rbsb.c; then echo $(srcdir)/rbsb.c; else echo rbsb.c; fi` | $(ANSI2KNR) rbsb_.c
+-tcp_.c: tcp.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/tcp.c; then echo $(srcdir)/tcp.c; else echo tcp.c; fi` | $(ANSI2KNR) tcp_.c
+-timing_.c: timing.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/timing.c; then echo $(srcdir)/timing.c; else echo timing.c; fi` | $(ANSI2KNR) timing_.c
+-zm_.c: zm.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/zm.c; then echo $(srcdir)/zm.c; else echo zm.c; fi` | $(ANSI2KNR) zm_.c
+-zperr_.c: zperr.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/zperr.c; then echo $(srcdir)/zperr.c; else echo zperr.c; fi` | $(ANSI2KNR) zperr_.c
+-zreadline_.c: zreadline.c $(ANSI2KNR)
+- $(CPP) $(DEFS) $(INCLUDES) $(CPPFLAGS) `if test -f $(srcdir)/zreadline.c; then echo $(srcdir)/zreadline.c; else echo zreadline.c; fi` | $(ANSI2KNR) zreadline_.c
+-canit_.o crctab_.o lrz_.o lsyslog_.o lsz_.o protname_.o rbsb_.o tcp_.o \
+-timing_.o zm_.o zperr_.o zreadline_.o : $(ANSI2KNR)
+-
+-tags: TAGS
+-
+-ID: $(HEADERS) $(SOURCES) $(LISP)
+- here=`pwd` && cd $(srcdir) \
+- && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP)
++info: info-am
+
+-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+- tags=; \
+- here=`pwd`; \
+- list='$(SOURCES) $(HEADERS)'; \
+- unique=`for i in $$list; do echo $$i; done | \
+- awk ' { files[$$0] = 1; } \
+- END { for (i in files) print i; }'`; \
+- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++info-am:
+
+-mostlyclean-tags:
++install-data-am:
+
+-clean-tags:
++install-dvi: install-dvi-am
+
+-distclean-tags:
+- -rm -f TAGS ID
++install-dvi-am:
+
+-maintainer-clean-tags:
++install-exec-am: install-binPROGRAMS install-exec-local
+
+-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
++install-html: install-html-am
+
+-subdir = src
++install-html-am:
+
+-distdir: $(DISTFILES)
+- @for file in $(DISTFILES); do \
+- d=$(srcdir); \
+- test -f $(distdir)/$$file \
+- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+- || cp -p $$d/$$file $(distdir)/$$file; \
+- done
+-canit.o: canit.c zglobal.h ../config.h zmodem.h ../lib/getopt.h
+-crctab.o: crctab.c
+-lrz.o: lrz.c zglobal.h ../config.h zmodem.h ../lib/getopt.h timing.h \
+- ../lib/long-options.h ../lib/xstrtoul.h ../lib/xstrtol.h \
+- ../lib/error.h
+-lsyslog.o: lsyslog.c ../config.h zglobal.h zmodem.h
+-lsz.o: lsz.c zglobal.h ../config.h zmodem.h ../lib/getopt.h timing.h \
+- ../lib/long-options.h ../lib/xstrtoul.h ../lib/xstrtol.h \
+- ../lib/error.h
+-protname.o: protname.c zglobal.h ../config.h zmodem.h
+-rbsb.o: rbsb.c zglobal.h ../config.h zmodem.h
+-tcp.o: tcp.c ../config.h zglobal.h zmodem.h ../lib/error.h
+-timing.o: timing.c zglobal.h ../config.h zmodem.h timing.h
+-zm.o: zm.c zglobal.h ../config.h zmodem.h
+-zperr.o: zperr.c zglobal.h ../config.h zmodem.h
+-zreadline.o: zreadline.c zglobal.h ../config.h zmodem.h ../lib/error.h
+-
+-info:
+-dvi:
+-check: all
+- $(MAKE)
+-installcheck:
+-install-exec: install-binPROGRAMS install-exec-local
+- @$(NORMAL_INSTALL)
++install-info: install-info-am
+
+-install-data:
+- @$(NORMAL_INSTALL)
++install-info-am:
+
+-install: install-exec install-data all
+- @:
++install-man:
+
+-uninstall: uninstall-binPROGRAMS uninstall-local
++install-pdf: install-pdf-am
+
+-install-strip:
+- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+-installdirs:
+- $(mkinstalldirs) $(DATADIR)$(bindir)
++install-pdf-am:
+
++install-ps: install-ps-am
+
+-mostlyclean-generic:
+- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
++install-ps-am:
+
+-clean-generic:
+- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
++installcheck-am:
+
+-distclean-generic:
+- -rm -f Makefile $(DISTCLEANFILES)
+- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
++maintainer-clean: maintainer-clean-am
++ -rm -f ./$(DEPDIR)/canit.Po
++ -rm -f ./$(DEPDIR)/crctab.Po
++ -rm -f ./$(DEPDIR)/lrz.Po
++ -rm -f ./$(DEPDIR)/lsyslog.Po
++ -rm -f ./$(DEPDIR)/lsz.Po
++ -rm -f ./$(DEPDIR)/protname.Po
++ -rm -f ./$(DEPDIR)/rbsb.Po
++ -rm -f ./$(DEPDIR)/tcp.Po
++ -rm -f ./$(DEPDIR)/timing.Po
++ -rm -f ./$(DEPDIR)/zm.Po
++ -rm -f ./$(DEPDIR)/zperr.Po
++ -rm -f ./$(DEPDIR)/zreadline.Po
++ -rm -f Makefile
++maintainer-clean-am: distclean-am maintainer-clean-generic
+
+-maintainer-clean-generic:
+- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+-mostlyclean: mostlyclean-binPROGRAMS mostlyclean-compile \
+- mostlyclean-krextra mostlyclean-kr mostlyclean-tags \
+- mostlyclean-generic
+-
+-clean: clean-binPROGRAMS clean-compile clean-krextra clean-kr \
+- clean-tags clean-generic mostlyclean
+-
+-distclean: distclean-binPROGRAMS distclean-compile distclean-krextra \
+- distclean-kr distclean-tags distclean-generic clean
+- -rm -f config.status
+-
+-maintainer-clean: maintainer-clean-binPROGRAMS maintainer-clean-compile \
+- maintainer-clean-krextra maintainer-clean-kr \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean
+- @echo "This command is intended for maintainers to use;"
+- @echo "it deletes files that may require special tools to rebuild."
++mostlyclean: mostlyclean-am
++
++mostlyclean-am: mostlyclean-compile mostlyclean-generic
++
++pdf: pdf-am
++
++pdf-am:
++
++ps: ps-am
++
++ps-am:
++
++uninstall-am: uninstall-binPROGRAMS uninstall-local
++
++.MAKE: install-am install-strip
++
++.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
++ clean-binPROGRAMS clean-generic cscopelist-am ctags ctags-am \
++ distclean distclean-compile distclean-generic distclean-tags \
++ distdir dvi dvi-am html html-am info info-am install \
++ install-am install-binPROGRAMS install-data install-data-am \
++ install-dvi install-dvi-am install-exec install-exec-am \
++ install-exec-local install-html install-html-am install-info \
++ install-info-am install-man install-pdf install-pdf-am \
++ install-ps install-ps-am install-strip installcheck \
++ installcheck-am installdirs maintainer-clean \
++ maintainer-clean-generic mostlyclean mostlyclean-compile \
++ mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
++ uninstall-am uninstall-binPROGRAMS uninstall-local
+
+-.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
+-maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
+-mostlyclean-compile distclean-compile clean-compile \
+-maintainer-clean-compile mostlyclean-krextra distclean-krextra \
+-clean-krextra maintainer-clean-krextra mostlyclean-kr distclean-kr \
+-clean-kr maintainer-clean-kr tags mostlyclean-tags distclean-tags \
+-clean-tags maintainer-clean-tags distdir info dvi installcheck \
+-install-exec install-data install uninstall all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++.PRECIOUS: Makefile
+
+
+ install-exec-local:
+diff -uprN clean/lrzsz-0.12.20/src/zglobal.h lrzsz-0.12.20/src/zglobal.h
+--- clean/lrzsz-0.12.20/src/zglobal.h 1998-12-29 12:34:59.000000000 +0000
++++ lrzsz-0.12.20/src/zglobal.h 2019-11-25 16:32:42.000000000 +0000
+@@ -180,9 +180,6 @@ struct termios;
+ #if HAVE_LOCALE_H
+ # include <locale.h>
+ #endif
+-#if !HAVE_SETLOCALE
+-# define setlocale(Category, Locale) /* empty */
+-#endif
+
+ #if ENABLE_NLS
+ # include <libintl.h>
+diff -uprN clean/lrzsz-0.12.20/stamp-h.in lrzsz-0.12.20/stamp-h.in
+--- clean/lrzsz-0.12.20/stamp-h.in 1998-12-30 07:51:07.000000000 +0000
++++ lrzsz-0.12.20/stamp-h.in 1970-01-01 01:00:00.000000000 +0100
+@@ -1 +0,0 @@
+-timestamp
+diff -uprN clean/lrzsz-0.12.20/testsuite/Makefile.in lrzsz-0.12.20/testsuite/Makefile.in
+--- clean/lrzsz-0.12.20/testsuite/Makefile.in 1998-12-30 16:31:50.000000000 +0000
++++ lrzsz-0.12.20/testsuite/Makefile.in 2019-11-26 11:37:46.000000000 +0000
+@@ -1,6 +1,8 @@
+-# Makefile.in generated automatically by automake 1.3 from Makefile.am
++# Makefile.in generated by automake 1.16.1 from Makefile.am.
++# @configure_input@
++
++# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -10,206 +12,477 @@
+ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+
+-
+-SHELL = /bin/sh
+-
+-srcdir = @srcdir@
+-top_srcdir = @top_srcdir@
++@SET_MAKE@
+ VPATH = @srcdir@
+-prefix = @prefix@
+-exec_prefix = @exec_prefix@
+-
+-bindir = @bindir@
+-sbindir = @sbindir@
+-libexecdir = @libexecdir@
+-datadir = @datadir@
+-sysconfdir = @sysconfdir@
+-sharedstatedir = @sharedstatedir@
+-localstatedir = @localstatedir@
+-libdir = @libdir@
+-infodir = @infodir@
+-mandir = @mandir@
+-includedir = @includedir@
+-oldincludedir = /usr/include
+-
+-DISTDIR =
+-
++am__is_gnu_make = { \
++ if test -z '$(MAKELEVEL)'; then \
++ false; \
++ elif test -n '$(MAKE_HOST)'; then \
++ true; \
++ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
++ true; \
++ else \
++ false; \
++ fi; \
++}
++am__make_running_with_option = \
++ case $${target_option-} in \
++ ?) ;; \
++ *) echo "am__make_running_with_option: internal error: invalid" \
++ "target option '$${target_option-}' specified" >&2; \
++ exit 1;; \
++ esac; \
++ has_opt=no; \
++ sane_makeflags=$$MAKEFLAGS; \
++ if $(am__is_gnu_make); then \
++ sane_makeflags=$$MFLAGS; \
++ else \
++ case $$MAKEFLAGS in \
++ *\\[\ \ ]*) \
++ bs=\\; \
++ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
++ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
++ esac; \
++ fi; \
++ skip_next=no; \
++ strip_trailopt () \
++ { \
++ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
++ }; \
++ for flg in $$sane_makeflags; do \
++ test $$skip_next = yes && { skip_next=no; continue; }; \
++ case $$flg in \
++ *=*|--*) continue;; \
++ -*I) strip_trailopt 'I'; skip_next=yes;; \
++ -*I?*) strip_trailopt 'I';; \
++ -*O) strip_trailopt 'O'; skip_next=yes;; \
++ -*O?*) strip_trailopt 'O';; \
++ -*l) strip_trailopt 'l'; skip_next=yes;; \
++ -*l?*) strip_trailopt 'l';; \
++ -[dEDm]) skip_next=yes;; \
++ -[JT]) skip_next=yes;; \
++ esac; \
++ case $$flg in \
++ *$$target_option*) has_opt=yes; break;; \
++ esac; \
++ done; \
++ test $$has_opt = yes
++am__make_dryrun = (target_option=n; $(am__make_running_with_option))
++am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+ pkgdatadir = $(datadir)/@PACKAGE@
+-pkglibdir = $(libdir)/@PACKAGE@
+ pkgincludedir = $(includedir)/@PACKAGE@
+-
+-top_builddir = ..
+-
+-ACLOCAL = @ACLOCAL@
+-AUTOCONF = @AUTOCONF@
+-AUTOMAKE = @AUTOMAKE@
+-AUTOHEADER = @AUTOHEADER@
+-
+-INSTALL = @INSTALL@
+-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+-INSTALL_DATA = @INSTALL_DATA@
+-INSTALL_SCRIPT = @INSTALL_SCRIPT@
+-transform = @program_transform_name@
+-
++pkglibdir = $(libdir)/@PACKAGE@
++pkglibexecdir = $(libexecdir)/@PACKAGE@
++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
++install_sh_DATA = $(install_sh) -c -m 644
++install_sh_PROGRAM = $(install_sh) -c
++install_sh_SCRIPT = $(install_sh) -c
++INSTALL_HEADER = $(INSTALL_DATA)
++transform = $(program_transform_name)
+ NORMAL_INSTALL = :
+ PRE_INSTALL = :
+ POST_INSTALL = :
+ NORMAL_UNINSTALL = :
+ PRE_UNINSTALL = :
+ POST_UNINSTALL = :
+-CATALOGS = @CATALOGS@
+-CATOBJEXT = @CATOBJEXT@
++build_triplet = @build@
++host_triplet = @host@
++subdir = testsuite
++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
++am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
++ $(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
++ $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
++ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
++ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
++ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
++ $(top_srcdir)/configure.in
++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
++ $(ACLOCAL_M4)
++DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
++CONFIG_HEADER = $(top_builddir)/config.h
++CONFIG_CLEAN_FILES =
++CONFIG_CLEAN_VPATH_FILES =
++AM_V_P = $(am__v_P_@AM_V@)
++am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
++am__v_P_0 = false
++am__v_P_1 = :
++AM_V_GEN = $(am__v_GEN_@AM_V@)
++am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
++am__v_GEN_0 = @echo " GEN " $@;
++am__v_GEN_1 =
++AM_V_at = $(am__v_at_@AM_V@)
++am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
++am__v_at_0 = @
++am__v_at_1 =
++SOURCES =
++DIST_SOURCES =
++am__can_run_installinfo = \
++ case $$AM_UPDATE_INFO_DIR in \
++ n|no|NO) false;; \
++ *) (install-info --version) >/dev/null 2>&1;; \
++ esac
++am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
++DEJATOOL = $(PACKAGE)
++RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
++EXPECT = expect
++RUNTEST = runtest
++am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/mkinstalldirs
++ACLOCAL = @ACLOCAL@
++ALLOCA = @ALLOCA@
++AMTAR = @AMTAR@
++AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
++AUTOCONF = @AUTOCONF@
++AUTOHEADER = @AUTOHEADER@
++AUTOMAKE = @AUTOMAKE@
++AWK = @AWK@
+ CC = @CC@
++CCDEPMODE = @CCDEPMODE@
+ CFLAGS = @CFLAGS@
+ CPP = @CPP@
+-DATADIRNAME = @DATADIRNAME@
++CPPFLAGS = @CPPFLAGS@
++CYGPATH_W = @CYGPATH_W@
++DEFS = @DEFS@
++DEPDIR = @DEPDIR@
++ECHO_C = @ECHO_C@
++ECHO_N = @ECHO_N@
++ECHO_T = @ECHO_T@
++EGREP = @EGREP@
+ ENABLE_TIMESYNC = @ENABLE_TIMESYNC@
+-GENCAT = @GENCAT@
+-GMOFILES = @GMOFILES@
++EXEEXT = @EXEEXT@
++GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+ GMSGFMT = @GMSGFMT@
+-GT_NO = @GT_NO@
+-GT_YES = @GT_YES@
+-INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
+-INSTOBJEXT = @INSTOBJEXT@
+-INTLDEPS = @INTLDEPS@
++GMSGFMT_015 = @GMSGFMT_015@
++GREP = @GREP@
++INSTALL = @INSTALL@
++INSTALL_DATA = @INSTALL_DATA@
++INSTALL_PROGRAM = @INSTALL_PROGRAM@
++INSTALL_SCRIPT = @INSTALL_SCRIPT@
++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+ INTLLIBS = @INTLLIBS@
+-INTLOBJS = @INTLOBJS@
++INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+ LDFLAGS = @LDFLAGS@
++LIBICONV = @LIBICONV@
++LIBINTL = @LIBINTL@
+ LIBOBJS = @LIBOBJS@
+ LIBS = @LIBS@
++LTLIBICONV = @LTLIBICONV@
++LTLIBINTL = @LTLIBINTL@
++LTLIBOBJS = @LTLIBOBJS@
+ MAKEINFO = @MAKEINFO@
+-MKINSTALLDIRS = @MKINSTALLDIRS@
++MKDIR_P = @MKDIR_P@
+ MSGFMT = @MSGFMT@
++MSGMERGE = @MSGMERGE@
++MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
++OBJEXT = @OBJEXT@
+ PACKAGE = @PACKAGE@
++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
++PACKAGE_NAME = @PACKAGE_NAME@
++PACKAGE_STRING = @PACKAGE_STRING@
++PACKAGE_TARNAME = @PACKAGE_TARNAME@
++PACKAGE_URL = @PACKAGE_URL@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
+-POFILES = @POFILES@
++PATH_SEPARATOR = @PATH_SEPARATOR@
+ POSUB = @POSUB@
+ RANLIB = @RANLIB@
+-U = @U@
+-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
++SED = @SED@
++SET_MAKE = @SET_MAKE@
++SHELL = @SHELL@
++STRIP = @STRIP@
+ USE_NLS = @USE_NLS@
+ VERSION = @VERSION@
+-l = @l@
++XGETTEXT = @XGETTEXT@
++XGETTEXT_015 = @XGETTEXT_015@
++XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
++abs_builddir = @abs_builddir@
++abs_srcdir = @abs_srcdir@
++abs_top_builddir = @abs_top_builddir@
++abs_top_srcdir = @abs_top_srcdir@
++ac_ct_CC = @ac_ct_CC@
++am__include = @am__include@
++am__leading_dot = @am__leading_dot@
++am__quote = @am__quote@
++am__tar = @am__tar@
++am__untar = @am__untar@
++bindir = @bindir@
++build = @build@
++build_alias = @build_alias@
++build_cpu = @build_cpu@
++build_os = @build_os@
++build_vendor = @build_vendor@
++builddir = @builddir@
++datadir = @datadir@
++datarootdir = @datarootdir@
++docdir = @docdir@
++dvidir = @dvidir@
++exec_prefix = @exec_prefix@
++host = @host@
++host_alias = @host_alias@
++host_cpu = @host_cpu@
++host_os = @host_os@
++host_vendor = @host_vendor@
++htmldir = @htmldir@
++includedir = @includedir@
++infodir = @infodir@
++install_sh = @install_sh@
++libdir = @libdir@
++libexecdir = @libexecdir@
++localedir = @localedir@
++localstatedir = @localstatedir@
++mandir = @mandir@
++mkdir_p = @mkdir_p@
++oldincludedir = @oldincludedir@
++pdfdir = @pdfdir@
++prefix = @prefix@
++program_transform_name = @program_transform_name@
++psdir = @psdir@
++sbindir = @sbindir@
++sharedstatedir = @sharedstatedir@
++srcdir = @srcdir@
++sysconfdir = @sysconfdir@
++target_alias = @target_alias@
++top_build_prefix = @top_build_prefix@
++top_builddir = @top_builddir@
++top_srcdir = @top_srcdir@
++AUTOMAKE_OPTIONS = dejagnu
++DISTFILES = Makefile.am Makefile.in
++CLEANFILES = lrzsz.log lrzsz.sum site.bak
++DISTCLEANFILES = site.exp
++all: all-am
+
+-AUTOMAKE_OPTIONS=dejagnu
++.SUFFIXES:
++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
++ @for dep in $?; do \
++ case '$(am__configure_deps)' in \
++ *$$dep*) \
++ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
++ && { if test -f $@; then exit 0; else break; fi; }; \
++ exit 1;; \
++ esac; \
++ done; \
++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu testsuite/Makefile'; \
++ $(am__cd) $(top_srcdir) && \
++ $(AUTOMAKE) --gnu testsuite/Makefile
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++ @case '$?' in \
++ *config.status*) \
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
++ *) \
++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
++ esac;
++
++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
++
++$(top_srcdir)/configure: $(am__configure_deps)
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
++$(ACLOCAL_M4): $(am__aclocal_m4_deps)
++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
++$(am__aclocal_m4_deps):
++tags TAGS:
+
+-DISTFILES=Makefile.am Makefile.in
+-CLEANFILES=lrzsz.log lrzsz.sum site.bak
+-DISTCLEANFILES=site.exp
+-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+-CONFIG_HEADER = ../config.h
+-CONFIG_CLEAN_FILES =
+-DIST_COMMON = Makefile.am Makefile.in
++ctags CTAGS:
+
++cscope cscopelist:
+
+-TAR = tar
+-GZIP = --best
+-EXPECT = expect
+-RUNTEST = runtest
+-all: Makefile
+
+-.SUFFIXES:
+-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps testsuite/Makefile
++check-DEJAGNU: site.exp
++ srcdir='$(srcdir)'; export srcdir; \
++ EXPECT=$(EXPECT); export EXPECT; \
++ if $(SHELL) -c "$(RUNTEST) --version" > /dev/null 2>&1; then \
++ exit_status=0; l='$(DEJATOOL)'; for tool in $$l; do \
++ if $(RUNTEST) $(RUNTESTDEFAULTFLAGS) $(AM_RUNTESTFLAGS) $(RUNTESTFLAGS); \
++ then :; else exit_status=1; fi; \
++ done; \
++ else echo "WARNING: could not find '$(RUNTEST)'" 1>&2; :;\
++ fi; \
++ exit $$exit_status
++site.exp: Makefile $(EXTRA_DEJAGNU_SITE_CONFIG)
++ @echo 'Making a new site.exp file ...'
++ @echo '## these variables are automatically generated by make ##' >site.tmp
++ @echo '# Do not edit here. If you wish to override these values' >>site.tmp
++ @echo '# edit the last section' >>site.tmp
++ @echo 'set srcdir "$(srcdir)"' >>site.tmp
++ @echo "set objdir `pwd`" >>site.tmp
++ @echo 'set build_alias "$(build_alias)"' >>site.tmp
++ @echo 'set build_triplet $(build_triplet)' >>site.tmp
++ @echo 'set host_alias "$(host_alias)"' >>site.tmp
++ @echo 'set host_triplet $(host_triplet)' >>site.tmp
++ @list='$(EXTRA_DEJAGNU_SITE_CONFIG)'; for f in $$list; do \
++ echo "## Begin content included from file $$f. Do not modify. ##" \
++ && cat `test -f "$$f" || echo '$(srcdir)/'`$$f \
++ && echo "## End content included from file $$f. ##" \
++ || exit 1; \
++ done >> site.tmp
++ @echo "## End of auto-generated content; you can edit from here. ##" >> site.tmp
++ @if test -f site.exp; then \
++ sed -e '1,/^## End of auto-generated content.*##/d' site.exp >> site.tmp; \
++ fi
++ @-rm -f site.bak
++ @test ! -f site.exp || mv site.exp site.bak
++ @mv site.tmp site.exp
++
++distclean-DEJAGNU:
++ -rm -f site.exp site.bak
++ -l='$(DEJATOOL)'; for tool in $$l; do \
++ rm -f $$tool.sum $$tool.log; \
++ done
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+- cd $(top_builddir) \
+- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
++distdir: $(BUILT_SOURCES)
++ $(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+-tags: TAGS
+-TAGS:
++distdir-am: $(DISTFILES)
++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ list='$(DISTFILES)'; \
++ dist_files=`for file in $$list; do echo $$file; done | \
++ sed -e "s|^$$srcdirstrip/||;t" \
++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
++ case $$dist_files in \
++ */*) $(MKDIR_P) `echo "$$dist_files" | \
++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
++ sort -u` ;; \
++ esac; \
++ for file in $$dist_files; do \
++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
++ if test -d $$d/$$file; then \
++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
++ if test -d "$(distdir)/$$file"; then \
++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++ fi; \
++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++ fi; \
++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
++ else \
++ test -f "$(distdir)/$$file" \
++ || cp -p $$d/$$file "$(distdir)/$$file" \
++ || exit 1; \
++ fi; \
++ done
++ $(MAKE) $(AM_MAKEFLAGS) \
++ top_distdir="$(top_distdir)" distdir="$(distdir)" \
++ dist-hook
++check-am: all-am
++ $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
++check: check-am
++all-am: Makefile
++installdirs:
++install: install-am
++install-exec: install-exec-am
++install-data: install-data-am
++uninstall: uninstall-am
+
++install-am: all-am
++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
++installcheck: installcheck-am
++install-strip:
++ if test -z '$(STRIP)'; then \
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ install; \
++ else \
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
++ fi
++mostlyclean-generic:
+
+-subdir = testsuite
++clean-generic:
++ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+-distdir: $(DISTFILES)
+- @for file in $(DISTFILES); do \
+- d=$(srcdir); \
+- test -f $(distdir)/$$file \
+- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+- || cp -p $$d/$$file $(distdir)/$$file; \
+- done
+- $(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
++distclean-generic:
++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
++ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+-RUNTESTFLAGS =
++maintainer-clean-generic:
++ @echo "This command is intended for maintainers to use"
++ @echo "it deletes files that may require special tools to rebuild."
++clean: clean-am
+
+-DEJATOOL = $(PACKAGE)
++clean-am: clean-generic mostlyclean-am
+
+-RUNTESTDEFAULTFLAGS = --tool $(DEJATOOL) --srcdir $$srcdir
++distclean: distclean-am
++ -rm -f Makefile
++distclean-am: clean-am distclean-DEJAGNU distclean-generic
+
+-check-DEJAGNU: site.exp
+- srcdir=`cd $(srcdir) && pwd`; export srcdir; \
+- EXPECT=$(EXPECT); export EXPECT; \
+- runtest=$(RUNTEST); \
+- if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
+- $$runtest $(RUNTESTDEFAULTFLAGS) $(RUNTESTFLAGS); \
+- else echo "WARNING: could not find \`runtest'" 1>&2; :;\
+- fi
+-site.exp: Makefile
+- @echo 'Making a new site.exp file...'
+- -@rm -f site.bak
+- @echo '## these variables are automatically generated by make ##' > $@-t
+- @echo '# Do not edit here. If you wish to override these values' >> $@-t
+- @echo '# edit the last section' >> $@-t
+- @echo 'set tool $(DEJATOOL)' >> $@-t
+- @echo 'set srcdir $(srcdir)' >> $@-t
+- @echo 'set objdir' `pwd` >> $@-t
+- @echo '## All variables above are generated by configure. Do Not Edit ##' >> $@-t
+- -@sed '1,/^## All variables above are.*##/ d' site.bak >> $@-t
+- -@mv site.exp site.bak
+- @mv $@-t site.exp
+-info:
+-dvi:
+-check: all
+- $(MAKE) check-DEJAGNU
+-installcheck:
+-install-exec:
+- @$(NORMAL_INSTALL)
++dvi: dvi-am
+
+-install-data:
+- @$(NORMAL_INSTALL)
++dvi-am:
+
+-install: install-exec install-data all
+- @:
++html: html-am
+
+-uninstall:
++html-am:
+
+-install-strip:
+- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+-installdirs:
++info: info-am
+
++info-am:
+
+-mostlyclean-generic:
+- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
++install-data-am:
+
+-clean-generic:
+- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
++install-dvi: install-dvi-am
+
+-distclean-generic:
+- -rm -f Makefile $(DISTCLEANFILES)
+- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
++install-dvi-am:
+
+-maintainer-clean-generic:
+- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+-mostlyclean: mostlyclean-generic
++install-exec-am:
+
+-clean: clean-generic mostlyclean
++install-html: install-html-am
+
+-distclean: distclean-generic clean
+- -rm -f config.status
++install-html-am:
+
+-maintainer-clean: maintainer-clean-generic distclean
+- @echo "This command is intended for maintainers to use;"
+- @echo "it deletes files that may require special tools to rebuild."
++install-info: install-info-am
++
++install-info-am:
++
++install-man:
++
++install-pdf: install-pdf-am
++
++install-pdf-am:
++
++install-ps: install-ps-am
++
++install-ps-am:
++
++installcheck-am:
++
++maintainer-clean: maintainer-clean-am
++ -rm -f Makefile
++maintainer-clean-am: distclean-am maintainer-clean-generic
++
++mostlyclean: mostlyclean-am
++
++mostlyclean-am: mostlyclean-generic
++
++pdf: pdf-am
++
++pdf-am:
++
++ps: ps-am
++
++ps-am:
++
++uninstall-am:
++
++.MAKE: check-am install-am install-strip
++
++.PHONY: all all-am check check-DEJAGNU check-am clean clean-generic \
++ cscopelist-am ctags-am dist-hook distclean distclean-DEJAGNU \
++ distclean-generic distdir dvi dvi-am html html-am info info-am \
++ install install-am install-data install-data-am install-dvi \
++ install-dvi-am install-exec install-exec-am install-html \
++ install-html-am install-info install-info-am install-man \
++ install-pdf install-pdf-am install-ps install-ps-am \
++ install-strip installcheck installcheck-am installdirs \
++ maintainer-clean maintainer-clean-generic mostlyclean \
++ mostlyclean-generic pdf pdf-am ps ps-am tags-am uninstall \
++ uninstall-am
+
+-.PHONY: tags distdir check-DEJAGNU info dvi installcheck install-exec \
+-install-data install uninstall all installdirs mostlyclean-generic \
+-distclean-generic clean-generic maintainer-clean-generic clean \
+-mostlyclean distclean maintainer-clean
++.PRECIOUS: Makefile
+
+
+ dist-hook:
diff --git a/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/gettext.patch b/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/gettext.patch
deleted file mode 100644
index 1a24a1f05e..0000000000
--- a/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/gettext.patch
+++ /dev/null
@@ -1,21884 +0,0 @@
-Upstream-Status: Inappropriate [configuration]
-
---- lrzsz-0.12.20.safe/ABOUT-NLS 1998-04-26 09:22:30.000000000 -0400
-+++ lrzsz-0.12.20/ABOUT-NLS 2004-09-12 14:40:34.323752952 -0400
-@@ -1,14 +1,14 @@
- Notes on the Free Translation Project
- *************************************
-
-- Free software is going international! The Free Translation Project
--is a way to get maintainers of free software, translators, and users all
-+Free software is going international! The Free Translation Project is
-+a way to get maintainers of free software, translators, and users all
- together, so that will gradually become able to speak many languages.
- A few packages already provide translations for their messages.
-
- If you found this `ABOUT-NLS' file inside a distribution, you may
- assume that the distributed package does use GNU `gettext' internally,
--itself available at your nearest GNU archive site. But you do *not*
-+itself available at your nearest GNU archive site. But you do _not_
- need to install GNU `gettext' prior to configuring, installing or using
- this package with messages translated.
-
-@@ -22,10 +22,10 @@
- `gettext' which is used. The information can be found in the
- `intl/VERSION' file, in internationalized packages.
-
--One advise in advance
--=====================
-+Quick configuration advice
-+==========================
-
-- If you want to exploit the full power of internationalization, you
-+If you want to exploit the full power of internationalization, you
- should configure it using
-
- ./configure --with-included-gettext
-@@ -34,42 +34,40 @@
- package, despite the existence of internationalizing capabilities in the
- operating system where this package is being installed. So far, only
- the `gettext' implementation in the GNU C library version 2 provides as
--many features (such as locale alias or message inheritance) as the
--implementation here. It is also not possible to offer this additional
--functionality on top of a `catgets' implementation. Future versions of
--GNU `gettext' will very likely convey even more functionality. So it
--might be a good idea to change to GNU `gettext' as soon as possible.
-+many features (such as locale alias, message inheritance, automatic
-+charset conversion or plural form handling) as the implementation here.
-+It is also not possible to offer this additional functionality on top
-+of a `catgets' implementation. Future versions of GNU `gettext' will
-+very likely convey even more functionality. So it might be a good idea
-+to change to GNU `gettext' as soon as possible.
-
-- So you need not provide this option if you are using GNU libc 2 or
-+ So you need _not_ provide this option if you are using GNU libc 2 or
- you have installed a recent copy of the GNU gettext package with the
- included `libintl'.
-
- INSTALL Matters
- ===============
-
-- Some packages are "localizable" when properly installed; the
--programs they contain can be made to speak your own native language.
--Most such packages use GNU `gettext'. Other packages have their own
--ways to internationalization, predating GNU `gettext'.
-+Some packages are "localizable" when properly installed; the programs
-+they contain can be made to speak your own native language. Most such
-+packages use GNU `gettext'. Other packages have their own ways to
-+internationalization, predating GNU `gettext'.
-
- By default, this package will be installed to allow translation of
--messages. It will automatically detect whether the system provides
--usable `catgets' (if using this is selected by the installer) or
--`gettext' functions. If neither is available, the GNU `gettext' own
-+messages. It will automatically detect whether the system already
-+provides the GNU `gettext' functions. If not, the GNU `gettext' own
- library will be used. This library is wholly contained within this
- package, usually in the `intl/' subdirectory, so prior installation of
--the GNU `gettext' package is *not* required. Installers may use
-+the GNU `gettext' package is _not_ required. Installers may use
- special options at configuration time for changing the default
- behaviour. The commands:
-
- ./configure --with-included-gettext
-- ./configure --with-catgets
- ./configure --disable-nls
-
--will respectively bypass any pre-existing `catgets' or `gettext' to use
--the internationalizing routines provided within this package, enable
--the use of the `catgets' functions (if found on the locale system), or
--else, *totally* disable translation of messages.
-+will respectively bypass any pre-existing `gettext' to use the
-+internationalizing routines provided within this package, or else,
-+_totally_ disable translation of messages.
-
- When you already have GNU `gettext' installed on your system and run
- configure without an option for your new package, `configure' will
-@@ -83,18 +81,10 @@
-
- to prevent auto-detection.
-
-- By default the configuration process will not test for the `catgets'
--function and therefore they will not be used. The reasons are already
--given above: the emulation on top of `catgets' cannot provide all the
--extensions provided by the GNU `gettext' library. If you nevertheless
--want to use the `catgets' functions use
--
-- ./configure --with-catgets
--
--to enable the test for `catgets' (this causes no harm if `catgets' is
--not available on your system). If you really select this option we
--would like to hear about the reasons because we cannot think of any
--good one ourself.
-+ The configuration process will not test for the `catgets' function
-+and therefore it will not be used. The reason is that even an
-+emulation of `gettext' on top of `catgets' could not provide all the
-+extensions of the GNU `gettext' library.
-
- Internationalized packages have usually many `po/LL.po' files, where
- LL gives an ISO 639 two-letter code identifying the language. Unless
-@@ -108,57 +98,73 @@
- Using This Package
- ==================
-
-- As a user, if your language has been installed for this package, you
-+As a user, if your language has been installed for this package, you
- only have to set the `LANG' environment variable to the appropriate
--ISO 639 `LL' two-letter code prior to using the programs in the
--package. For example, let's suppose that you speak German. At the
--shell prompt, merely execute `setenv LANG de' (in `csh'),
--`export LANG; LANG=de' (in `sh') or `export LANG=de' (in `bash'). This
--can be done from your `.login' or `.profile' file, once and for all.
-+`LL_CC' combination. Here `LL' is an ISO 639 two-letter language code,
-+and `CC' is an ISO 3166 two-letter country code. For example, let's
-+suppose that you speak German and live in Germany. At the shell
-+prompt, merely execute `setenv LANG de_DE' (in `csh'),
-+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
-+This can be done from your `.login' or `.profile' file, once and for
-+all.
-
-- An operating system might already offer message localization for
--many of its programs, while other programs have been installed locally
--with the full capabilities of GNU `gettext'. Just using `gettext'
--extended syntax for `LANG' would break proper localization of already
--available operating system programs. In this case, users should set
--both `LANGUAGE' and `LANG' variables in their environment, as programs
--using GNU `gettext' give preference to `LANGUAGE'. For example, some
--Swedish users would rather read translations in German than English for
--when Swedish is not available. This is easily accomplished by setting
--`LANGUAGE' to `sv:de' while leaving `LANG' to `sv'.
-+ You might think that the country code specification is redundant.
-+But in fact, some languages have dialects in different countries. For
-+example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
-+country code serves to distinguish the dialects.
-+
-+ The locale naming convention of `LL_CC', with `LL' denoting the
-+language and `CC' denoting the country, is the one use on systems based
-+on GNU libc. On other systems, some variations of this scheme are
-+used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
-+locales supported by your system for your country by running the command
-+`locale -a | grep '^LL''.
-+
-+ Not all programs have translations for all languages. By default, an
-+English message is shown in place of a nonexistent translation. If you
-+understand other languages, you can set up a priority list of languages.
-+This is done through a different environment variable, called
-+`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
-+for the purpose of message handling, but you still need to have `LANG'
-+set to the primary language; this is required by other parts of the
-+system libraries. For example, some Swedish users who would rather
-+read translations in German than English for when Swedish is not
-+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
-+
-+ Special advice for Norwegian users: The language code for Norwegian
-+bokma*l changed from `no' to `nb' recently (in 2003). During the
-+transition period, while some message catalogs for this language are
-+installed under `nb' and some older ones under `no', it's recommended
-+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
-+older translations are used.
-+
-+ In the `LANGUAGE' environment variable, but not in the `LANG'
-+environment variable, `LL_CC' combinations can be abbreviated as `LL'
-+to denote the language's main dialect. For example, `de' is equivalent
-+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
-+(Portuguese as spoken in Portugal) in this context.
-
- Translating Teams
- =================
-
-- For the Free Translation Project to be a success, we need interested
-+For the Free Translation Project to be a success, we need interested
- people who like their own language and write it well, and who are also
- able to synergize with other translators speaking the same language.
--Each translation team has its own mailing list, courtesy of Linux
--International. You may reach your translation team at the address
--`LL@li.org', replacing LL by the two-letter ISO 639 code for your
--language. Language codes are *not* the same as the country codes given
--in ISO 3166. The following translation teams exist, as of August 1997:
--
-- Chinese `zh', Czech `cs', Danish `da', Dutch `nl', English `en',
-- Esperanto `eo', Finnish `fi', French `fr', German `de', Hungarian
-- `hu', Irish `ga', Italian `it', Indonesian `id', Japanese `ja',
-- Korean `ko', Latin `la', Norwegian `no', Persian `fa', Polish
-- `pl', Portuguese `pt', Russian `ru', Slovenian `sl', Spanish `es',
-- Swedish `sv', and Turkish `tr'.
--
--For example, you may reach the Chinese translation team by writing to
--`zh@li.org'.
-+Each translation team has its own mailing list. The up-to-date list of
-+teams can be found at the Free Translation Project's homepage,
-+`http://www.iro.umontreal.ca/contrib/po/HTML/', in the "National teams"
-+area.
-
-- If you'd like to volunteer to *work* at translating messages, you
-+ If you'd like to volunteer to _work_ at translating messages, you
- should become a member of the translating team for your own language.
--The subscribing address is *not* the same as the list itself, it has
-+The subscribing address is _not_ the same as the list itself, it has
- `-request' appended. For example, speakers of Swedish can send a
- message to `sv-request@li.org', having this message body:
-
- subscribe
-
- Keep in mind that team members are expected to participate
--*actively* in translations, or at solving translational difficulties,
-+_actively_ in translations, or at solving translational difficulties,
- rather than merely lurking around. If your team does not exist yet and
- you want to start one, or if you are unsure about what to do or how to
- get started, please write to `translation@iro.umontreal.ca' to reach the
-@@ -171,43 +177,559 @@
- Available Packages
- ==================
-
-- Languages are not equally supported in all packages. The following
--matrix shows the current state of internationalization, as of August
--1997. The matrix shows, in regard of each package, for which languages
--PO files have been submitted to translation coordination.
-+Languages are not equally supported in all packages. The following
-+matrix shows the current state of internationalization, as of January
-+2004. The matrix shows, in regard of each package, for which languages
-+PO files have been submitted to translation coordination, with a
-+translation percentage of at least 50%.
-
-- Ready PO files cs da de en es fi fr it ja ko nl no pl pt sl sv
-- .-------------------------------------------------.
-- bash | [] [] [] | 3
-- bison | [] [] [] | 3
-- clisp | [] [] [] [] | 4
-- cpio | [] [] [] [] [] | 5
-- diffutils | [] [] [] [] [] | 5
-- enscript | [] [] [] [] [] [] | 6
-- fileutils | [] [] [] [] [] [] [] [] [] [] | 10
-- findutils | [] [] [] [] [] [] [] [] | 8
-- flex | [] [] [] [] | 4
-- gcal | [] [] [] [] [] | 5
-- gettext | [] [] [] [] [] [] [] [] [] [] | 11
-- grep | [] [] [] [] [] [] [] [] [] | 9
-- hello | [] [] [] [] [] [] [] [] [] [] | 10
-- id-utils | [] [] [] | 3
-- indent | [] [] [] [] | 4
-- libc | [] [] [] [] [] [] [] | 7
-- m4 | [] [] [] [] [] | 5
-- make | [] [] [] [] [] [] | 6
-- music | [] [] | 2
-- ptx | [] [] [] [] [] [] [] [] | 8
-- recode | [] [] [] [] [] [] [] [] [] | 9
-- sh-utils | [] [] [] [] [] [] [] | 7
-- sharutils | [] [] [] [] [] | 5
-- tar | [] [] [] [] [] [] [] [] [] [] | 10
-- texinfo | [] | 1
-- textutils | [] [] [] [] [] [] [] [] [] | 9
-- wdiff | [] [] [] [] [] [] [] [] | 8
-- `-------------------------------------------------'
-- 16 languages cs da de en es fi fr it ja ko nl no pl pt sl sv
-- 27 packages 3 2 24 1 17 1 26 2 1 11 20 9 19 7 7 17 167
-+ Ready PO files af am ar az be bg bs ca cs da de el en en_GB eo es
-+ +----------------------------------------------------+
-+ a2ps | [] [] [] [] |
-+ aegis | () |
-+ ant-phone | () |
-+ anubis | |
-+ ap-utils | |
-+ aspell | [] |
-+ bash | [] [] [] [] |
-+ batchelor | |
-+ bfd | [] [] |
-+ binutils | [] [] |
-+ bison | [] [] [] |
-+ bluez-pin | [] [] [] |
-+ clisp | |
-+ clisp | [] [] [] |
-+ console-tools | [] [] |
-+ coreutils | [] [] [] [] |
-+ cpio | [] [] [] |
-+ darkstat | [] () [] |
-+ diffutils | [] [] [] [] [] [] [] |
-+ e2fsprogs | [] [] [] |
-+ enscript | [] [] [] [] |
-+ error | [] [] [] [] [] |
-+ fetchmail | [] () [] [] [] [] |
-+ fileutils | [] [] [] |
-+ findutils | [] [] [] [] [] [] [] |
-+ flex | [] [] [] [] |
-+ fslint | |
-+ gas | [] |
-+ gawk | [] [] [] [] |
-+ gbiff | [] |
-+ gcal | [] |
-+ gcc | [] [] |
-+ gettext | [] [] [] [] [] |
-+ gettext-examples | [] [] [] [] |
-+ gettext-runtime | [] [] [] [] [] |
-+ gettext-tools | [] [] [] |
-+ gimp-print | [] [] [] [] [] |
-+ gliv | |
-+ glunarclock | [] [] |
-+ gnubiff | [] |
-+ gnucash | [] () [] [] |
-+ gnucash-glossary | [] () [] |
-+ gnupg | [] () [] [] [] [] |
-+ gpe-aerial | [] |
-+ gpe-beam | [] [] |
-+ gpe-calendar | [] [] |
-+ gpe-clock | [] [] |
-+ gpe-conf | [] [] |
-+ gpe-contacts | [] [] |
-+ gpe-edit | [] |
-+ gpe-go | [] |
-+ gpe-login | [] [] |
-+ gpe-ownerinfo | [] [] |
-+ gpe-sketchbook | [] [] |
-+ gpe-su | [] [] |
-+ gpe-taskmanager | [] [] |
-+ gpe-timesheet | [] |
-+ gpe-today | [] [] |
-+ gpe-todo | [] [] |
-+ gphoto2 | [] [] [] [] |
-+ gprof | [] [] [] |
-+ gpsdrive | () () () |
-+ gramadoir | [] |
-+ grep | [] [] [] [] [] [] |
-+ gretl | [] |
-+ gtick | [] () |
-+ hello | [] [] [] [] [] [] |
-+ id-utils | [] [] |
-+ indent | [] [] [] [] |
-+ iso_3166 | [] [] [] [] [] [] [] [] [] [] |
-+ iso_3166_1 | [] [] [] [] [] [] |
-+ iso_3166_2 | |
-+ iso_3166_3 | [] |
-+ iso_4217 | [] [] [] [] |
-+ iso_639 | |
-+ jpilot | [] [] [] |
-+ jtag | |
-+ jwhois | [] |
-+ kbd | [] [] [] [] [] |
-+ latrine | () |
-+ ld | [] [] |
-+ libc | [] [] [] [] [] [] |
-+ libgpewidget | [] [] |
-+ libiconv | [] [] [] [] [] |
-+ lifelines | [] () |
-+ lilypond | [] |
-+ lingoteach | |
-+ lingoteach_lessons | () () |
-+ lynx | [] [] [] [] |
-+ m4 | [] [] [] [] |
-+ mailutils | [] [] |
-+ make | [] [] [] |
-+ man-db | [] () [] [] () |
-+ minicom | [] [] [] |
-+ mysecretdiary | [] [] [] |
-+ nano | [] () [] [] [] |
-+ nano_1_0 | [] () [] [] [] |
-+ opcodes | [] |
-+ parted | [] [] [] [] [] |
-+ ptx | [] [] [] [] [] |
-+ python | |
-+ radius | [] |
-+ recode | [] [] [] [] [] [] [] |
-+ rpm | [] [] |
-+ screem | |
-+ scrollkeeper | [] [] [] [] [] [] |
-+ sed | [] [] [] [] [] [] |
-+ sh-utils | [] [] [] |
-+ shared-mime-info | |
-+ sharutils | [] [] [] [] [] [] |
-+ silky | () |
-+ skencil | [] () [] |
-+ sketch | [] () [] |
-+ soundtracker | [] [] [] |
-+ sp | [] |
-+ tar | [] [] [] [] |
-+ texinfo | [] [] [] |
-+ textutils | [] [] [] [] |
-+ tin | () () |
-+ tp-robot | |
-+ tuxpaint | [] [] [] [] [] [] [] |
-+ unicode-han-tra... | |
-+ unicode-transla... | |
-+ util-linux | [] [] [] [] [] |
-+ vorbis-tools | [] [] [] [] |
-+ wastesedge | () |
-+ wdiff | [] [] [] [] |
-+ wget | [] [] [] [] [] [] |
-+ xchat | [] [] [] [] |
-+ xfree86_xkb_xml | [] [] |
-+ xpad | [] |
-+ +----------------------------------------------------+
-+ af am ar az be bg bs ca cs da de el en en_GB eo es
-+ 4 0 0 1 9 4 1 40 41 60 78 17 1 5 13 68
-+
-+ et eu fa fi fr ga gl he hr hu id is it ja ko lg
-+ +-------------------------------------------------+
-+ a2ps | [] [] [] () () |
-+ aegis | |
-+ ant-phone | [] |
-+ anubis | [] |
-+ ap-utils | [] |
-+ aspell | [] [] |
-+ bash | [] [] |
-+ batchelor | [] [] |
-+ bfd | [] |
-+ binutils | [] [] |
-+ bison | [] [] [] [] |
-+ bluez-pin | [] [] [] [] [] |
-+ clisp | |
-+ clisp | [] |
-+ console-tools | |
-+ coreutils | [] [] [] [] [] [] |
-+ cpio | [] [] [] [] |
-+ darkstat | () [] [] [] |
-+ diffutils | [] [] [] [] [] [] [] |
-+ e2fsprogs | |
-+ enscript | [] [] |
-+ error | [] [] [] [] |
-+ fetchmail | [] |
-+ fileutils | [] [] [] [] [] [] |
-+ findutils | [] [] [] [] [] [] [] [] [] [] [] |
-+ flex | [] [] [] |
-+ fslint | [] |
-+ gas | [] |
-+ gawk | [] [] [] |
-+ gbiff | [] |
-+ gcal | [] |
-+ gcc | [] |
-+ gettext | [] [] [] |
-+ gettext-examples | [] [] |
-+ gettext-runtime | [] [] [] [] [] |
-+ gettext-tools | [] [] [] |
-+ gimp-print | [] [] |
-+ gliv | () |
-+ glunarclock | [] [] [] [] |
-+ gnubiff | [] |
-+ gnucash | () [] |
-+ gnucash-glossary | [] |
-+ gnupg | [] [] [] [] [] [] [] |
-+ gpe-aerial | [] |
-+ gpe-beam | [] |
-+ gpe-calendar | [] [] [] |
-+ gpe-clock | [] |
-+ gpe-conf | [] |
-+ gpe-contacts | [] [] |
-+ gpe-edit | [] [] |
-+ gpe-go | [] |
-+ gpe-login | [] [] |
-+ gpe-ownerinfo | [] [] [] |
-+ gpe-sketchbook | [] |
-+ gpe-su | [] |
-+ gpe-taskmanager | [] |
-+ gpe-timesheet | [] [] [] |
-+ gpe-today | [] [] |
-+ gpe-todo | [] [] |
-+ gphoto2 | [] [] [] |
-+ gprof | [] [] |
-+ gpsdrive | () () () |
-+ gramadoir | [] [] |
-+ grep | [] [] [] [] [] [] [] [] [] [] [] |
-+ gretl | [] [] |
-+ gtick | [] [] [] |
-+ hello | [] [] [] [] [] [] [] [] [] [] [] [] [] |
-+ id-utils | [] [] [] [] |
-+ indent | [] [] [] [] [] [] [] [] [] |
-+ iso_3166 | [] [] [] [] [] [] [] |
-+ iso_3166_1 | [] [] [] [] [] |
-+ iso_3166_2 | |
-+ iso_3166_3 | |
-+ iso_4217 | [] [] [] [] [] [] |
-+ iso_639 | |
-+ jpilot | [] () |
-+ jtag | [] |
-+ jwhois | [] [] [] [] |
-+ kbd | [] |
-+ latrine | [] |
-+ ld | [] |
-+ libc | [] [] [] [] [] [] |
-+ libgpewidget | [] [] [] [] |
-+ libiconv | [] [] [] [] [] [] [] [] [] |
-+ lifelines | () |
-+ lilypond | [] |
-+ lingoteach | [] [] |
-+ lingoteach_lessons | |
-+ lynx | [] [] [] [] |
-+ m4 | [] [] [] [] |
-+ mailutils | |
-+ make | [] [] [] [] [] [] |
-+ man-db | () () |
-+ minicom | [] [] [] [] |
-+ mysecretdiary | [] [] |
-+ nano | [] [] [] [] |
-+ nano_1_0 | [] [] [] [] |
-+ opcodes | [] |
-+ parted | [] [] [] |
-+ ptx | [] [] [] [] [] [] [] |
-+ python | |
-+ radius | [] |
-+ recode | [] [] [] [] [] [] |
-+ rpm | [] [] |
-+ screem | |
-+ scrollkeeper | [] |
-+ sed | [] [] [] [] [] [] [] [] [] |
-+ sh-utils | [] [] [] [] [] [] [] |
-+ shared-mime-info | [] [] [] |
-+ sharutils | [] [] [] [] [] |
-+ silky | () [] () () |
-+ skencil | [] |
-+ sketch | [] |
-+ soundtracker | [] [] |
-+ sp | [] () |
-+ tar | [] [] [] [] [] [] [] [] [] |
-+ texinfo | [] [] [] [] |
-+ textutils | [] [] [] [] [] [] |
-+ tin | [] () |
-+ tp-robot | [] |
-+ tuxpaint | [] [] [] [] [] [] [] [] [] |
-+ unicode-han-tra... | |
-+ unicode-transla... | [] [] |
-+ util-linux | [] [] [] [] () [] |
-+ vorbis-tools | [] |
-+ wastesedge | () |
-+ wdiff | [] [] [] [] [] [] |
-+ wget | [] [] [] [] [] [] [] |
-+ xchat | [] [] [] |
-+ xfree86_xkb_xml | [] [] |
-+ xpad | [] [] |
-+ +-------------------------------------------------+
-+ et eu fa fi fr ga gl he hr hu id is it ja ko lg
-+ 22 2 1 26 106 28 24 8 10 41 33 1 26 33 12 0
-+
-+ lt lv mk mn ms mt nb nl nn no nso pl pt pt_BR ro ru
-+ +-----------------------------------------------------+
-+ a2ps | [] [] () () [] [] [] |
-+ aegis | () () () |
-+ ant-phone | [] [] |
-+ anubis | [] [] [] [] [] [] |
-+ ap-utils | [] () [] |
-+ aspell | [] |
-+ bash | [] [] [] |
-+ batchelor | [] |
-+ bfd | [] |
-+ binutils | [] |
-+ bison | [] [] [] [] [] |
-+ bluez-pin | [] [] [] |
-+ clisp | |
-+ clisp | [] |
-+ console-tools | [] |
-+ coreutils | [] [] |
-+ cpio | [] [] [] [] [] |
-+ darkstat | [] [] [] [] |
-+ diffutils | [] [] [] [] [] [] |
-+ e2fsprogs | [] |
-+ enscript | [] [] [] [] |
-+ error | [] [] [] |
-+ fetchmail | [] [] () [] |
-+ fileutils | [] [] [] |
-+ findutils | [] [] [] [] [] |
-+ flex | [] [] [] [] |
-+ fslint | [] [] |
-+ gas | |
-+ gawk | [] [] [] |
-+ gbiff | [] [] |
-+ gcal | |
-+ gcc | |
-+ gettext | [] [] [] |
-+ gettext-examples | [] [] [] |
-+ gettext-runtime | [] [] [] [] |
-+ gettext-tools | [] [] |
-+ gimp-print | [] |
-+ gliv | [] [] [] |
-+ glunarclock | [] [] [] [] |
-+ gnubiff | [] |
-+ gnucash | [] [] () [] |
-+ gnucash-glossary | [] [] |
-+ gnupg | [] |
-+ gpe-aerial | [] [] [] [] |
-+ gpe-beam | [] [] [] [] |
-+ gpe-calendar | [] [] [] [] |
-+ gpe-clock | [] [] [] [] |
-+ gpe-conf | [] [] [] [] |
-+ gpe-contacts | [] [] [] [] |
-+ gpe-edit | [] [] [] [] |
-+ gpe-go | [] [] [] |
-+ gpe-login | [] [] [] [] |
-+ gpe-ownerinfo | [] [] [] [] |
-+ gpe-sketchbook | [] [] [] [] |
-+ gpe-su | [] [] [] [] |
-+ gpe-taskmanager | [] [] [] [] |
-+ gpe-timesheet | [] [] [] [] |
-+ gpe-today | [] [] [] [] |
-+ gpe-todo | [] [] [] [] |
-+ gphoto2 | [] |
-+ gprof | [] [] |
-+ gpsdrive | () () [] |
-+ gramadoir | () [] |
-+ grep | [] [] [] [] [] |
-+ gretl | |
-+ gtick | [] [] [] |
-+ hello | [] [] [] [] [] [] [] [] [] [] |
-+ id-utils | [] [] [] [] |
-+ indent | [] [] [] [] |
-+ iso_3166 | [] [] [] |
-+ iso_3166_1 | [] [] |
-+ iso_3166_2 | |
-+ iso_3166_3 | [] |
-+ iso_4217 | [] [] [] [] [] [] [] [] |
-+ iso_639 | [] |
-+ jpilot | () () |
-+ jtag | |
-+ jwhois | [] [] [] [] () |
-+ kbd | [] [] [] |
-+ latrine | [] |
-+ ld | |
-+ libc | [] [] [] [] |
-+ libgpewidget | [] [] [] |
-+ libiconv | [] [] [] [] [] |
-+ lifelines | |
-+ lilypond | |
-+ lingoteach | |
-+ lingoteach_lessons | |
-+ lynx | [] [] [] |
-+ m4 | [] [] [] [] [] |
-+ mailutils | [] [] [] |
-+ make | [] [] [] [] |
-+ man-db | [] |
-+ minicom | [] [] [] [] |
-+ mysecretdiary | [] [] [] |
-+ nano | [] [] [] [] [] |
-+ nano_1_0 | [] [] [] [] [] [] |
-+ opcodes | [] [] |
-+ parted | [] [] [] [] |
-+ ptx | [] [] [] [] [] [] [] [] |
-+ python | |
-+ radius | [] [] |
-+ recode | [] [] [] [] |
-+ rpm | [] [] [] |
-+ screem | |
-+ scrollkeeper | [] [] [] [] [] |
-+ sed | [] [] [] |
-+ sh-utils | [] [] |
-+ shared-mime-info | [] [] |
-+ sharutils | [] [] |
-+ silky | () |
-+ skencil | [] [] |
-+ sketch | [] [] |
-+ soundtracker | |
-+ sp | |
-+ tar | [] [] [] [] [] [] |
-+ texinfo | [] [] [] [] |
-+ textutils | [] [] |
-+ tin | |
-+ tp-robot | [] |
-+ tuxpaint | [] [] [] [] [] [] [] [] |
-+ unicode-han-tra... | |
-+ unicode-transla... | |
-+ util-linux | [] [] [] |
-+ vorbis-tools | [] [] [] |
-+ wastesedge | |
-+ wdiff | [] [] [] [] [] |
-+ wget | [] [] [] |
-+ xchat | [] [] [] |
-+ xfree86_xkb_xml | [] [] |
-+ xpad | [] [] |
-+ +-----------------------------------------------------+
-+ lt lv mk mn ms mt nb nl nn no nso pl pt pt_BR ro ru
-+ 1 2 0 3 12 0 10 69 6 7 1 40 26 36 76 63
-+
-+ sk sl sr sv ta th tr uk ven vi wa xh zh_CN zh_TW zu
-+ +-----------------------------------------------------+
-+ a2ps | [] [] [] [] | 16
-+ aegis | | 0
-+ ant-phone | | 3
-+ anubis | [] [] | 9
-+ ap-utils | () | 3
-+ aspell | | 4
-+ bash | | 9
-+ batchelor | | 3
-+ bfd | [] [] | 6
-+ binutils | [] [] [] | 8
-+ bison | [] [] | 14
-+ bluez-pin | [] [] [] | 14
-+ clisp | | 0
-+ clisp | | 5
-+ console-tools | | 3
-+ coreutils | [] [] [] [] | 16
-+ cpio | [] [] | 14
-+ darkstat | [] [] [] () () | 12
-+ diffutils | [] [] [] | 23
-+ e2fsprogs | [] [] | 6
-+ enscript | [] [] | 12
-+ error | [] [] [] | 15
-+ fetchmail | [] [] | 11
-+ fileutils | [] [] [] [] [] | 17
-+ findutils | [] [] [] [] [] [] | 29
-+ flex | [] [] | 13
-+ fslint | | 3
-+ gas | [] | 3
-+ gawk | [] [] | 12
-+ gbiff | | 4
-+ gcal | [] [] | 4
-+ gcc | [] | 4
-+ gettext | [] [] [] [] [] | 16
-+ gettext-examples | [] [] [] [] [] | 14
-+ gettext-runtime | [] [] [] [] [] [] [] [] | 22
-+ gettext-tools | [] [] [] [] [] [] | 14
-+ gimp-print | [] [] | 10
-+ gliv | | 3
-+ glunarclock | [] [] [] | 13
-+ gnubiff | | 3
-+ gnucash | [] [] | 9
-+ gnucash-glossary | [] [] [] | 8
-+ gnupg | [] [] [] [] | 17
-+ gpe-aerial | [] | 7
-+ gpe-beam | [] | 8
-+ gpe-calendar | [] [] [] [] | 13
-+ gpe-clock | [] [] [] | 10
-+ gpe-conf | [] [] | 9
-+ gpe-contacts | [] [] [] | 11
-+ gpe-edit | [] [] [] [] [] | 12
-+ gpe-go | | 5
-+ gpe-login | [] [] [] [] [] | 13
-+ gpe-ownerinfo | [] [] [] [] | 13
-+ gpe-sketchbook | [] [] | 9
-+ gpe-su | [] [] [] | 10
-+ gpe-taskmanager | [] [] [] | 10
-+ gpe-timesheet | [] [] [] [] | 12
-+ gpe-today | [] [] [] [] [] | 13
-+ gpe-todo | [] [] [] [] | 12
-+ gphoto2 | [] [] [] | 11
-+ gprof | [] [] | 9
-+ gpsdrive | [] [] | 3
-+ gramadoir | [] | 5
-+ grep | [] [] [] [] | 26
-+ gretl | | 3
-+ gtick | | 7
-+ hello | [] [] [] [] [] | 34
-+ id-utils | [] [] | 12
-+ indent | [] [] [] [] | 21
-+ iso_3166 | [] [] [] [] [] [] [] | 27
-+ iso_3166_1 | [] [] [] | 16
-+ iso_3166_2 | | 0
-+ iso_3166_3 | | 2
-+ iso_4217 | [] [] [] [] [] [] | 24
-+ iso_639 | | 1
-+ jpilot | [] [] [] [] [] | 9
-+ jtag | [] | 2
-+ jwhois | () [] [] | 11
-+ kbd | [] [] | 11
-+ latrine | | 2
-+ ld | [] [] | 5
-+ libc | [] [] [] [] | 20
-+ libgpewidget | [] [] [] [] | 13
-+ libiconv | [] [] [] [] [] [] [] [] | 27
-+ lifelines | [] | 2
-+ lilypond | [] | 3
-+ lingoteach | | 2
-+ lingoteach_lessons | () | 0
-+ lynx | [] [] [] | 14
-+ m4 | [] [] | 15
-+ mailutils | | 5
-+ make | [] [] [] | 16
-+ man-db | [] | 5
-+ minicom | | 11
-+ mysecretdiary | [] [] | 10
-+ nano | [] [] [] [] | 17
-+ nano_1_0 | [] [] [] | 17
-+ opcodes | [] [] | 6
-+ parted | [] [] [] | 15
-+ ptx | [] [] | 22
-+ python | | 0
-+ radius | | 4
-+ recode | [] [] [] | 20
-+ rpm | [] [] | 9
-+ screem | [] [] | 2
-+ scrollkeeper | [] [] [] | 15
-+ sed | [] [] [] [] [] [] | 24
-+ sh-utils | [] [] | 14
-+ shared-mime-info | [] [] | 7
-+ sharutils | [] [] [] [] | 17
-+ silky | () | 3
-+ skencil | [] | 6
-+ sketch | [] | 6
-+ soundtracker | [] [] | 7
-+ sp | [] | 3
-+ tar | [] [] [] [] [] | 24
-+ texinfo | [] [] [] | 14
-+ textutils | [] [] [] [] | 16
-+ tin | | 1
-+ tp-robot | | 2
-+ tuxpaint | [] [] [] [] [] | 29
-+ unicode-han-tra... | | 0
-+ unicode-transla... | | 2
-+ util-linux | [] [] | 15
-+ vorbis-tools | | 8
-+ wastesedge | | 0
-+ wdiff | [] [] [] | 18
-+ wget | [] [] [] [] [] [] [] [] | 24
-+ xchat | [] [] [] [] [] | 15
-+ xfree86_xkb_xml | [] [] [] [] [] | 11
-+ xpad | | 5
-+ +-----------------------------------------------------+
-+ 63 teams sk sl sr sv ta th tr uk ven vi wa xh zh_CN zh_TW zu
-+ 131 domains 47 19 28 83 0 0 59 13 1 1 11 0 22 22 0 1373
-
- Some counters in the preceding matrix are higher than the number of
- visible blocks let us expect. This is because a few extra PO files are
-@@ -220,6 +742,27 @@
- lag between the mere existence a PO file and its wide availability in a
- distribution.
-
-- If August 1997 seems to be old, you may fetch a more recent copy of
--this `ABOUT-NLS' file on most GNU archive sites.
-+ If January 2004 seems to be old, you may fetch a more recent copy of
-+this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
-+matrix with full percentage details can be found at
-+`http://www.iro.umontreal.ca/contrib/po/HTML/matrix.html'.
-+
-+Using `gettext' in new packages
-+===============================
-+
-+If you are writing a freely available program and want to
-+internationalize it you are welcome to use GNU `gettext' in your
-+package. Of course you have to respect the GNU Library General Public
-+License which covers the use of the GNU `gettext' library. This means
-+in particular that even non-free programs can use `libintl' as a shared
-+library, whereas only free software can use `libintl' as a static
-+library or use modified versions of `libintl'.
-+
-+ Once the sources are changed appropriately and the setup can handle
-+the use of `gettext' the only thing missing are the translations. The
-+Free Translation Project is also available for packages which are not
-+developed inside the GNU project. Therefore the information given above
-+applies also for every other Free Software Project. Contact
-+`translation@iro.umontreal.ca' to make the `.pot' files available to
-+the translation teams.
-
---- lrzsz-0.12.20.safe/ChangeLog 1998-12-29 17:49:56.000000000 -0500
-+++ lrzsz-0.12.20/ChangeLog 2004-09-12 14:40:35.846521456 -0400
-@@ -1,3 +1,11 @@
-+2004-09-12 gettextize <bug-gnu-gettext@gnu.org>
-+
-+ * Makefile.am (ACLOCAL_AMFLAGS): New variable.
-+ (EXTRA_DIST): Add config.rpath.
-+ * configure.in (AC_OUTPUT): Add m4/Makefile.
-+ (AC_OUTPUT): Remove command that created po/Makefile.
-+ (AC_LINK_FILES): Remove invocation.
-+
- 1998-12-29 Uwe Ohse <uwe@ohse.de>
-
- * src/lrz.c: removed stpcpy call.
---- lrzsz-0.12.20.safe/config.rpath 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/config.rpath 2004-09-12 14:40:34.329752040 -0400
-@@ -0,0 +1,548 @@
-+#! /bin/sh
-+# Output a system dependent set of variables, describing how to set the
-+# run time search path of shared libraries in an executable.
-+#
-+# Copyright 1996-2003 Free Software Foundation, Inc.
-+# Taken from GNU libtool, 2001
-+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+#
-+# The first argument passed to this file is the canonical host specification,
-+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-+# or
-+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
-+# should be set by the caller.
-+#
-+# The set of defined variables is at the end of this script.
-+
-+# Known limitations:
-+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
-+# than 256 bytes, otherwise the compiler driver will dump core. The only
-+# known workaround is to choose shorter directory names for the build
-+# directory and/or the installation directory.
-+
-+# All known linkers require a `.a' archive for static linking (except M$VC,
-+# which needs '.lib').
-+libext=a
-+shrext=.so
-+
-+host="$1"
-+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+
-+# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC.
-+
-+wl=
-+if test "$GCC" = yes; then
-+ wl='-Wl,'
-+else
-+ case "$host_os" in
-+ aix*)
-+ wl='-Wl,'
-+ ;;
-+ mingw* | pw32* | os2*)
-+ ;;
-+ hpux9* | hpux10* | hpux11*)
-+ wl='-Wl,'
-+ ;;
-+ irix5* | irix6* | nonstopux*)
-+ wl='-Wl,'
-+ ;;
-+ newsos6)
-+ ;;
-+ linux*)
-+ case $CC in
-+ icc|ecc)
-+ wl='-Wl,'
-+ ;;
-+ ccc)
-+ wl='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+ osf3* | osf4* | osf5*)
-+ wl='-Wl,'
-+ ;;
-+ sco3.2v5*)
-+ ;;
-+ solaris*)
-+ wl='-Wl,'
-+ ;;
-+ sunos4*)
-+ wl='-Qoption ld '
-+ ;;
-+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-+ wl='-Wl,'
-+ ;;
-+ sysv4*MP*)
-+ ;;
-+ uts4*)
-+ ;;
-+ esac
-+fi
-+
-+# Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS.
-+
-+hardcode_libdir_flag_spec=
-+hardcode_libdir_separator=
-+hardcode_direct=no
-+hardcode_minus_L=no
-+
-+case "$host_os" in
-+ cygwin* | mingw* | pw32*)
-+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ if test "$GCC" != yes; then
-+ with_gnu_ld=no
-+ fi
-+ ;;
-+ openbsd*)
-+ with_gnu_ld=no
-+ ;;
-+esac
-+
-+ld_shlibs=yes
-+if test "$with_gnu_ld" = yes; then
-+ case "$host_os" in
-+ aix3* | aix4* | aix5*)
-+ # On AIX/PPC, the GNU linker is very broken
-+ if test "$host_cpu" != ia64; then
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ amigaos*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-+ # that the semantics of dynamic libraries on AmigaOS, at least up
-+ # to version 4, is to share data among multiple programs linked
-+ # with the same dynamic library. Since this doesn't match the
-+ # behavior of shared libraries on other platforms, we can use
-+ # them.
-+ ld_shlibs=no
-+ ;;
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ :
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ cygwin* | mingw* | pw32*)
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ :
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ netbsd*)
-+ ;;
-+ solaris* | sysv5*)
-+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+ ld_shlibs=no
-+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ :
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ sunos4*)
-+ hardcode_direct=yes
-+ ;;
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ :
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ esac
-+ if test "$ld_shlibs" = yes; then
-+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
-+ # option of GNU ld is called -rpath, not --rpath.
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ fi
-+else
-+ case "$host_os" in
-+ aix3*)
-+ # Note: this linker hardcodes the directories in LIBPATH if there
-+ # are no directories specified by -L.
-+ hardcode_minus_L=yes
-+ if test "$GCC" = yes; then
-+ # Neither direct hardcoding nor static linking is supported with a
-+ # broken collect2.
-+ hardcode_direct=unsupported
-+ fi
-+ ;;
-+ aix4* | aix5*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ else
-+ aix_use_runtimelinking=no
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-+ for ld_flag in $LDFLAGS; do
-+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+ aix_use_runtimelinking=yes
-+ break
-+ fi
-+ done
-+ esac
-+ fi
-+ hardcode_direct=yes
-+ hardcode_libdir_separator=':'
-+ if test "$GCC" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ hardcode_direct=yes
-+ else
-+ # We have old collect2
-+ hardcode_direct=unsupported
-+ hardcode_minus_L=yes
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_libdir_separator=
-+ fi
-+ esac
-+ fi
-+ # Begin _LT_AC_SYS_LIBPATH_AIX.
-+ echo 'int main () { return 0; }' > conftest.c
-+ ${CC} ${LDFLAGS} conftest.c -o conftest
-+ aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`
-+ if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`
-+ fi
-+ if test -z "$aix_libpath"; then
-+ aix_libpath="/usr/lib:/lib"
-+ fi
-+ rm -f conftest.c conftest
-+ # End _LT_AC_SYS_LIBPATH_AIX.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-+ else
-+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ fi
-+ fi
-+ ;;
-+ amigaos*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+ # see comment about different semantics on the GNU ld section
-+ ld_shlibs=no
-+ ;;
-+ bsdi4*)
-+ ;;
-+ cygwin* | mingw* | pw32*)
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ hardcode_libdir_flag_spec=' '
-+ libext=lib
-+ ;;
-+ darwin* | rhapsody*)
-+ if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-+ hardcode_direct=no
-+ fi
-+ ;;
-+ dgux*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ ;;
-+ freebsd1*)
-+ ld_shlibs=no
-+ ;;
-+ freebsd2.2*)
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ ;;
-+ freebsd2*)
-+ hardcode_direct=yes
-+ hardcode_minus_L=yes
-+ ;;
-+ freebsd*)
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ ;;
-+ hpux9*)
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ hardcode_direct=yes
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ ;;
-+ hpux10* | hpux11*)
-+ if test "$with_gnu_ld" = no; then
-+ case "$host_cpu" in
-+ hppa*64*)
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ hardcode_direct=no
-+ ;;
-+ ia64*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_direct=no
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ ;;
-+ *)
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ hardcode_direct=yes
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ irix5* | irix6* | nonstopux*)
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ ;;
-+ netbsd*)
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ ;;
-+ newsos6)
-+ hardcode_direct=yes
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ ;;
-+ openbsd*)
-+ hardcode_direct=yes
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ else
-+ case "$host_os" in
-+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ ;;
-+ *)
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ os2*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+ ;;
-+ osf3*)
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ ;;
-+ osf4* | osf5*)
-+ if test "$GCC" = yes; then
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ else
-+ # Both cc and cxx compiler support -rpath directly
-+ hardcode_libdir_flag_spec='-rpath $libdir'
-+ fi
-+ hardcode_libdir_separator=:
-+ ;;
-+ sco3.2v5*)
-+ ;;
-+ solaris*)
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ ;;
-+ sunos4*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_direct=yes
-+ hardcode_minus_L=yes
-+ ;;
-+ sysv4)
-+ case $host_vendor in
-+ sni)
-+ hardcode_direct=yes # is this really true???
-+ ;;
-+ siemens)
-+ hardcode_direct=no
-+ ;;
-+ motorola)
-+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
-+ ;;
-+ sysv4.3*)
-+ ;;
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ ld_shlibs=yes
-+ fi
-+ ;;
-+ sysv4.2uw2*)
-+ hardcode_direct=yes
-+ hardcode_minus_L=no
-+ ;;
-+ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
-+ ;;
-+ sysv5*)
-+ hardcode_libdir_flag_spec=
-+ ;;
-+ uts4*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ ;;
-+ *)
-+ ld_shlibs=no
-+ ;;
-+ esac
-+fi
-+
-+# Check dynamic linker characteristics
-+# Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER.
-+libname_spec='lib$name'
-+case "$host_os" in
-+ aix3*)
-+ ;;
-+ aix4* | aix5*)
-+ ;;
-+ amigaos*)
-+ ;;
-+ beos*)
-+ ;;
-+ bsdi4*)
-+ ;;
-+ cygwin* | mingw* | pw32*)
-+ shrext=.dll
-+ ;;
-+ darwin* | rhapsody*)
-+ shrext=.dylib
-+ ;;
-+ dgux*)
-+ ;;
-+ freebsd1*)
-+ ;;
-+ freebsd*)
-+ ;;
-+ gnu*)
-+ ;;
-+ hpux9* | hpux10* | hpux11*)
-+ case "$host_cpu" in
-+ ia64*)
-+ shrext=.so
-+ ;;
-+ hppa*64*)
-+ shrext=.sl
-+ ;;
-+ *)
-+ shrext=.sl
-+ ;;
-+ esac
-+ ;;
-+ irix5* | irix6* | nonstopux*)
-+ case "$host_os" in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
-+ *) libsuff= shlibsuff= ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+ linux*oldld* | linux*aout* | linux*coff*)
-+ ;;
-+ linux*)
-+ ;;
-+ netbsd*)
-+ ;;
-+ newsos6)
-+ ;;
-+ nto-qnx)
-+ ;;
-+ openbsd*)
-+ ;;
-+ os2*)
-+ libname_spec='$name'
-+ shrext=.dll
-+ ;;
-+ osf3* | osf4* | osf5*)
-+ ;;
-+ sco3.2v5*)
-+ ;;
-+ solaris*)
-+ ;;
-+ sunos4*)
-+ ;;
-+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-+ ;;
-+ sysv4*MP*)
-+ ;;
-+ uts4*)
-+ ;;
-+esac
-+
-+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
-+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
-+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-+
-+sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
-+
-+# How to pass a linker flag through the compiler.
-+wl="$escaped_wl"
-+
-+# Static library suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally "so").
-+shlibext="$shlibext"
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator="$hardcode_libdir_separator"
-+
-+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct="$hardcode_direct"
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L="$hardcode_minus_L"
-+
-+EOF
---- lrzsz-0.12.20.safe/configure.in 2004-09-12 14:39:55.161706488 -0400
-+++ lrzsz-0.12.20/configure.in 2004-09-12 14:40:35.816526016 -0400
-@@ -260,11 +260,10 @@
- AM_GNU_GETTEXT
-
- AC_DEFINE_UNQUOTED(LOCALEDIR,"$prefix/$DATADIRNAME")
--AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
-
--AC_OUTPUT([Makefile intl/Makefile lib/Makefile testsuite/Makefile \
-+AC_OUTPUT([Makefile intl/Makefile lib/Makefile testsuite/Makefile m4/Makefile \
- man/Makefile po/Makefile.in src/Makefile debian/rules Specfile systype \
- src/lrzszbug],
--[sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile;
-+[
- chmod +x debian/rules;
- test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h])
---- lrzsz-0.12.20.safe/intl/bindtextdom.c 1998-04-26 09:22:36.000000000 -0400
-+++ lrzsz-0.12.20/intl/bindtextdom.c 2004-09-12 14:40:34.343749912 -0400
-@@ -1,59 +1,75 @@
- /* Implementation of the bindtextdomain(3) function
-- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-+ Copyright (C) 1995-1998, 2000-2003 Free Software Foundation, Inc.
-
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-
- #ifdef HAVE_CONFIG_H
- # include <config.h>
- #endif
-
--#if defined STDC_HEADERS || defined _LIBC
--# include <stdlib.h>
--#else
--# ifdef HAVE_MALLOC_H
--# include <malloc.h>
--# else
--void free ();
--# endif
--#endif
-+#include <stddef.h>
-+#include <stdlib.h>
-+#include <string.h>
-
--#if defined HAVE_STRING_H || defined _LIBC
--# include <string.h>
-+#ifdef _LIBC
-+# include <libintl.h>
- #else
--# include <strings.h>
--# ifndef memcpy
--# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
--# endif
-+# include "libgnuintl.h"
- #endif
-+#include "gettextP.h"
-
- #ifdef _LIBC
--# include <libintl.h>
-+/* We have to handle multi-threaded applications. */
-+# include <bits/libc-lock.h>
- #else
--# include "libgettext.h"
-+/* Provide dummy implementation if this is outside glibc. */
-+# define __libc_rwlock_define(CLASS, NAME)
-+# define __libc_rwlock_wrlock(NAME)
-+# define __libc_rwlock_unlock(NAME)
-+#endif
-+
-+/* The internal variables in the standalone libintl.a must have different
-+ names than the internal variables in GNU libc, otherwise programs
-+ using libintl.a cannot be linked statically. */
-+#if !defined _LIBC
-+# define _nl_default_dirname libintl_nl_default_dirname
-+# define _nl_domain_bindings libintl_nl_domain_bindings
-+#endif
-+
-+/* Some compilers, like SunOS4 cc, don't have offsetof in <stddef.h>. */
-+#ifndef offsetof
-+# define offsetof(type,ident) ((size_t)&(((type*)0)->ident))
- #endif
--#include "gettext.h"
--#include "gettextP.h"
-
- /* @@ end of prolog @@ */
-
- /* Contains the default location of the message catalogs. */
- extern const char _nl_default_dirname[];
-+#ifdef _LIBC
-+extern const char _nl_default_dirname_internal[] attribute_hidden;
-+#else
-+# define INTUSE(name) name
-+#endif
-
- /* List with bindings of specific domains. */
- extern struct binding *_nl_domain_bindings;
-
-+/* Lock variable to protect the global data in the gettext implementation. */
-+__libc_rwlock_define (extern, _nl_state_lock attribute_hidden)
-+
-
- /* Names for the libintl functions are a problem. They must not clash
- with existing names and they should follow ANSI C. But this source
-@@ -61,23 +77,41 @@
- prefix. So we have to make a difference here. */
- #ifdef _LIBC
- # define BINDTEXTDOMAIN __bindtextdomain
--# define strdup(str) __strdup (str)
-+# define BIND_TEXTDOMAIN_CODESET __bind_textdomain_codeset
-+# ifndef strdup
-+# define strdup(str) __strdup (str)
-+# endif
- #else
--# define BINDTEXTDOMAIN bindtextdomain__
-+# define BINDTEXTDOMAIN libintl_bindtextdomain
-+# define BIND_TEXTDOMAIN_CODESET libintl_bind_textdomain_codeset
- #endif
-
--/* Specify that the DOMAINNAME message catalog will be found
-- in DIRNAME rather than in the system locale data base. */
--char *
--BINDTEXTDOMAIN (domainname, dirname)
-- const char *domainname;
-- const char *dirname;
-+/* Specifies the directory name *DIRNAMEP and the output codeset *CODESETP
-+ to be used for the DOMAINNAME message catalog.
-+ If *DIRNAMEP or *CODESETP is NULL, the corresponding attribute is not
-+ modified, only the current value is returned.
-+ If DIRNAMEP or CODESETP is NULL, the corresponding attribute is neither
-+ modified nor returned. */
-+static void
-+set_binding_values (const char *domainname,
-+ const char **dirnamep, const char **codesetp)
- {
- struct binding *binding;
-+ int modified;
-
- /* Some sanity checks. */
- if (domainname == NULL || domainname[0] == '\0')
-- return NULL;
-+ {
-+ if (dirnamep)
-+ *dirnamep = NULL;
-+ if (codesetp)
-+ *codesetp = NULL;
-+ return;
-+ }
-+
-+ __libc_rwlock_wrlock (_nl_state_lock);
-+
-+ modified = 0;
-
- for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
- {
-@@ -93,81 +127,173 @@
- }
- }
-
-- if (dirname == NULL)
-- /* The current binding has be to returned. */
-- return binding == NULL ? (char *) _nl_default_dirname : binding->dirname;
--
- if (binding != NULL)
- {
-- /* The domain is already bound. If the new value and the old
-- one are equal we simply do nothing. Otherwise replace the
-- old binding. */
-- if (strcmp (dirname, binding->dirname) != 0)
-+ if (dirnamep)
- {
-- char *new_dirname;
-+ const char *dirname = *dirnamep;
-
-- if (strcmp (dirname, _nl_default_dirname) == 0)
-- new_dirname = (char *) _nl_default_dirname;
-+ if (dirname == NULL)
-+ /* The current binding has be to returned. */
-+ *dirnamep = binding->dirname;
- else
- {
-+ /* The domain is already bound. If the new value and the old
-+ one are equal we simply do nothing. Otherwise replace the
-+ old binding. */
-+ char *result = binding->dirname;
-+ if (strcmp (dirname, result) != 0)
-+ {
-+ if (strcmp (dirname, INTUSE(_nl_default_dirname)) == 0)
-+ result = (char *) INTUSE(_nl_default_dirname);
-+ else
-+ {
- #if defined _LIBC || defined HAVE_STRDUP
-- new_dirname = strdup (dirname);
-- if (new_dirname == NULL)
-- return NULL;
-+ result = strdup (dirname);
- #else
-- size_t len = strlen (dirname) + 1;
-- new_dirname = (char *) malloc (len);
-- if (new_dirname == NULL)
-- return NULL;
--
-- memcpy (new_dirname, dirname, len);
-+ size_t len = strlen (dirname) + 1;
-+ result = (char *) malloc (len);
-+ if (__builtin_expect (result != NULL, 1))
-+ memcpy (result, dirname, len);
- #endif
-+ }
-+
-+ if (__builtin_expect (result != NULL, 1))
-+ {
-+ if (binding->dirname != INTUSE(_nl_default_dirname))
-+ free (binding->dirname);
-+
-+ binding->dirname = result;
-+ modified = 1;
-+ }
-+ }
-+ *dirnamep = result;
- }
-+ }
-
-- if (binding->dirname != _nl_default_dirname)
-- free (binding->dirname);
-+ if (codesetp)
-+ {
-+ const char *codeset = *codesetp;
-
-- binding->dirname = new_dirname;
-+ if (codeset == NULL)
-+ /* The current binding has be to returned. */
-+ *codesetp = binding->codeset;
-+ else
-+ {
-+ /* The domain is already bound. If the new value and the old
-+ one are equal we simply do nothing. Otherwise replace the
-+ old binding. */
-+ char *result = binding->codeset;
-+ if (result == NULL || strcmp (codeset, result) != 0)
-+ {
-+#if defined _LIBC || defined HAVE_STRDUP
-+ result = strdup (codeset);
-+#else
-+ size_t len = strlen (codeset) + 1;
-+ result = (char *) malloc (len);
-+ if (__builtin_expect (result != NULL, 1))
-+ memcpy (result, codeset, len);
-+#endif
-+
-+ if (__builtin_expect (result != NULL, 1))
-+ {
-+ if (binding->codeset != NULL)
-+ free (binding->codeset);
-+
-+ binding->codeset = result;
-+ binding->codeset_cntr++;
-+ modified = 1;
-+ }
-+ }
-+ *codesetp = result;
-+ }
- }
- }
-+ else if ((dirnamep == NULL || *dirnamep == NULL)
-+ && (codesetp == NULL || *codesetp == NULL))
-+ {
-+ /* Simply return the default values. */
-+ if (dirnamep)
-+ *dirnamep = INTUSE(_nl_default_dirname);
-+ if (codesetp)
-+ *codesetp = NULL;
-+ }
- else
- {
- /* We have to create a new binding. */
-- size_t len;
-+ size_t len = strlen (domainname) + 1;
- struct binding *new_binding =
-- (struct binding *) malloc (sizeof (*new_binding));
-+ (struct binding *) malloc (offsetof (struct binding, domainname) + len);
-
-- if (new_binding == NULL)
-- return NULL;
-+ if (__builtin_expect (new_binding == NULL, 0))
-+ goto failed;
-
-+ memcpy (new_binding->domainname, domainname, len);
-+
-+ if (dirnamep)
-+ {
-+ const char *dirname = *dirnamep;
-+
-+ if (dirname == NULL)
-+ /* The default value. */
-+ dirname = INTUSE(_nl_default_dirname);
-+ else
-+ {
-+ if (strcmp (dirname, INTUSE(_nl_default_dirname)) == 0)
-+ dirname = INTUSE(_nl_default_dirname);
-+ else
-+ {
-+ char *result;
- #if defined _LIBC || defined HAVE_STRDUP
-- new_binding->domainname = strdup (domainname);
-- if (new_binding->domainname == NULL)
-- return NULL;
-+ result = strdup (dirname);
-+ if (__builtin_expect (result == NULL, 0))
-+ goto failed_dirname;
- #else
-- len = strlen (domainname) + 1;
-- new_binding->domainname = (char *) malloc (len);
-- if (new_binding->domainname == NULL)
-- return NULL;
-- memcpy (new_binding->domainname, domainname, len);
-+ size_t len = strlen (dirname) + 1;
-+ result = (char *) malloc (len);
-+ if (__builtin_expect (result == NULL, 0))
-+ goto failed_dirname;
-+ memcpy (result, dirname, len);
- #endif
--
-- if (strcmp (dirname, _nl_default_dirname) == 0)
-- new_binding->dirname = (char *) _nl_default_dirname;
-+ dirname = result;
-+ }
-+ }
-+ *dirnamep = dirname;
-+ new_binding->dirname = (char *) dirname;
-+ }
- else
-+ /* The default value. */
-+ new_binding->dirname = (char *) INTUSE(_nl_default_dirname);
-+
-+ new_binding->codeset_cntr = 0;
-+
-+ if (codesetp)
- {
-+ const char *codeset = *codesetp;
-+
-+ if (codeset != NULL)
-+ {
-+ char *result;
-+
- #if defined _LIBC || defined HAVE_STRDUP
-- new_binding->dirname = strdup (dirname);
-- if (new_binding->dirname == NULL)
-- return NULL;
-+ result = strdup (codeset);
-+ if (__builtin_expect (result == NULL, 0))
-+ goto failed_codeset;
- #else
-- len = strlen (dirname) + 1;
-- new_binding->dirname = (char *) malloc (len);
-- if (new_binding->dirname == NULL)
-- return NULL;
-- memcpy (new_binding->dirname, dirname, len);
-+ size_t len = strlen (codeset) + 1;
-+ result = (char *) malloc (len);
-+ if (__builtin_expect (result == NULL, 0))
-+ goto failed_codeset;
-+ memcpy (result, codeset, len);
- #endif
-+ codeset = result;
-+ new_binding->codeset_cntr++;
-+ }
-+ *codesetp = codeset;
-+ new_binding->codeset = (char *) codeset;
- }
-+ else
-+ new_binding->codeset = NULL;
-
- /* Now enqueue it. */
- if (_nl_domain_bindings == NULL
-@@ -187,13 +313,51 @@
- binding->next = new_binding;
- }
-
-- binding = new_binding;
-+ modified = 1;
-+
-+ /* Here we deal with memory allocation failures. */
-+ if (0)
-+ {
-+ failed_codeset:
-+ if (new_binding->dirname != INTUSE(_nl_default_dirname))
-+ free (new_binding->dirname);
-+ failed_dirname:
-+ free (new_binding);
-+ failed:
-+ if (dirnamep)
-+ *dirnamep = NULL;
-+ if (codesetp)
-+ *codesetp = NULL;
-+ }
- }
-
-- return binding->dirname;
-+ /* If we modified any binding, we flush the caches. */
-+ if (modified)
-+ ++_nl_msg_cat_cntr;
-+
-+ __libc_rwlock_unlock (_nl_state_lock);
-+}
-+
-+/* Specify that the DOMAINNAME message catalog will be found
-+ in DIRNAME rather than in the system locale data base. */
-+char *
-+BINDTEXTDOMAIN (const char *domainname, const char *dirname)
-+{
-+ set_binding_values (domainname, &dirname, NULL);
-+ return (char *) dirname;
-+}
-+
-+/* Specify the character encoding in which the messages from the
-+ DOMAINNAME message catalog will be returned. */
-+char *
-+BIND_TEXTDOMAIN_CODESET (const char *domainname, const char *codeset)
-+{
-+ set_binding_values (domainname, NULL, &codeset);
-+ return (char *) codeset;
- }
-
- #ifdef _LIBC
--/* Alias for function name in GNU C Library. */
-+/* Aliases for function names in GNU C Library. */
- weak_alias (__bindtextdomain, bindtextdomain);
-+weak_alias (__bind_textdomain_codeset, bind_textdomain_codeset);
- #endif
---- lrzsz-0.12.20.safe/intl/cat-compat.c 1998-04-26 09:22:37.000000000 -0400
-+++ lrzsz-0.12.20/intl/cat-compat.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,262 +0,0 @@
--/* Compatibility code for gettext-using-catgets interface.
-- Copyright (C) 1995, 1997 Free Software Foundation, Inc.
--
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-- any later version.
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
--
--#ifdef HAVE_CONFIG_H
--# include <config.h>
--#endif
--
--#include <stdio.h>
--
--#ifdef STDC_HEADERS
--# include <stdlib.h>
--# include <string.h>
--#else
--char *getenv ();
--# ifdef HAVE_MALLOC_H
--# include <malloc.h>
--# endif
--#endif
--
--#ifdef HAVE_NL_TYPES_H
--# include <nl_types.h>
--#endif
--
--#include "libgettext.h"
--
--/* @@ end of prolog @@ */
--
--/* XPG3 defines the result of `setlocale (category, NULL)' as:
-- ``Directs `setlocale()' to query `category' and return the current
-- setting of `local'.''
-- However it does not specify the exact format. And even worse: POSIX
-- defines this not at all. So we can use this feature only on selected
-- system (e.g. those using GNU C Library). */
--#ifdef _LIBC
--# define HAVE_LOCALE_NULL
--#endif
--
--/* The catalog descriptor. */
--static nl_catd catalog = (nl_catd) -1;
--
--/* Name of the default catalog. */
--static const char default_catalog_name[] = "messages";
--
--/* Name of currently used catalog. */
--static const char *catalog_name = default_catalog_name;
--
--/* Get ID for given string. If not found return -1. */
--static int msg_to_cat_id PARAMS ((const char *msg));
--
--/* Substitution for systems lacking this function in their C library. */
--#if !_LIBC && !HAVE_STPCPY
--static char *stpcpy PARAMS ((char *dest, const char *src));
--#endif
--
--
--/* Set currently used domain/catalog. */
--char *
--textdomain (domainname)
-- const char *domainname;
--{
-- nl_catd new_catalog;
-- char *new_name;
-- size_t new_name_len;
-- char *lang;
--
--#if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES \
-- && defined HAVE_LOCALE_NULL
-- lang = setlocale (LC_MESSAGES, NULL);
--#else
-- lang = getenv ("LC_ALL");
-- if (lang == NULL || lang[0] == '\0')
-- {
-- lang = getenv ("LC_MESSAGES");
-- if (lang == NULL || lang[0] == '\0')
-- lang = getenv ("LANG");
-- }
--#endif
-- if (lang == NULL || lang[0] == '\0')
-- lang = "C";
--
-- /* See whether name of currently used domain is asked. */
-- if (domainname == NULL)
-- return (char *) catalog_name;
--
-- if (domainname[0] == '\0')
-- domainname = default_catalog_name;
--
-- /* Compute length of added path element. */
-- new_name_len = sizeof (LOCALEDIR) - 1 + 1 + strlen (lang)
-- + sizeof ("/LC_MESSAGES/") - 1 + sizeof (PACKAGE) - 1
-- + sizeof (".cat");
--
-- new_name = (char *) malloc (new_name_len);
-- if (new_name == NULL)
-- return NULL;
--
-- strcpy (new_name, PACKAGE);
-- new_catalog = catopen (new_name, 0);
--
-- if (new_catalog == (nl_catd) -1)
-- {
-- /* NLSPATH search didn't work, try absolute path */
-- sprintf (new_name, "%s/%s/LC_MESSAGES/%s.cat", LOCALEDIR, lang,
-- PACKAGE);
-- new_catalog = catopen (new_name, 0);
--
-- if (new_catalog == (nl_catd) -1)
-- {
-- free (new_name);
-- return (char *) catalog_name;
-- }
-- }
--
-- /* Close old catalog. */
-- if (catalog != (nl_catd) -1)
-- catclose (catalog);
-- if (catalog_name != default_catalog_name)
-- free ((char *) catalog_name);
--
-- catalog = new_catalog;
-- catalog_name = new_name;
--
-- return (char *) catalog_name;
--}
--
--char *
--bindtextdomain (domainname, dirname)
-- const char *domainname;
-- const char *dirname;
--{
--#if HAVE_SETENV || HAVE_PUTENV
-- char *old_val, *new_val, *cp;
-- size_t new_val_len;
--
-- /* This does not make much sense here but to be compatible do it. */
-- if (domainname == NULL)
-- return NULL;
--
-- /* Compute length of added path element. If we use setenv we don't need
-- the first byts for NLSPATH=, but why complicate the code for this
-- peanuts. */
-- new_val_len = sizeof ("NLSPATH=") - 1 + strlen (dirname)
-- + sizeof ("/%L/LC_MESSAGES/%N.cat");
--
-- old_val = getenv ("NLSPATH");
-- if (old_val == NULL || old_val[0] == '\0')
-- {
-- old_val = NULL;
-- new_val_len += 1 + sizeof (LOCALEDIR) - 1
-- + sizeof ("/%L/LC_MESSAGES/%N.cat");
-- }
-- else
-- new_val_len += strlen (old_val);
--
-- new_val = (char *) malloc (new_val_len);
-- if (new_val == NULL)
-- return NULL;
--
--# if HAVE_SETENV
-- cp = new_val;
--# else
-- cp = stpcpy (new_val, "NLSPATH=");
--# endif
--
-- cp = stpcpy (cp, dirname);
-- cp = stpcpy (cp, "/%L/LC_MESSAGES/%N.cat:");
--
-- if (old_val == NULL)
-- {
--# if __STDC__
-- stpcpy (cp, LOCALEDIR "/%L/LC_MESSAGES/%N.cat");
--# else
--
-- cp = stpcpy (cp, LOCALEDIR);
-- stpcpy (cp, "/%L/LC_MESSAGES/%N.cat");
--# endif
-- }
-- else
-- stpcpy (cp, old_val);
--
--# if HAVE_SETENV
-- setenv ("NLSPATH", new_val, 1);
-- free (new_val);
--# else
-- putenv (new_val);
-- /* Do *not* free the environment entry we just entered. It is used
-- from now on. */
--# endif
--
--#endif
--
-- return (char *) domainname;
--}
--
--#undef gettext
--char *
--gettext (msg)
-- const char *msg;
--{
-- int msgid;
--
-- if (msg == NULL || catalog == (nl_catd) -1)
-- return (char *) msg;
--
-- /* Get the message from the catalog. We always use set number 1.
-- The message ID is computed by the function `msg_to_cat_id'
-- which works on the table generated by `po-to-tbl'. */
-- msgid = msg_to_cat_id (msg);
-- if (msgid == -1)
-- return (char *) msg;
--
-- return catgets (catalog, 1, msgid, (char *) msg);
--}
--
--/* Look through the table `_msg_tbl' which has `_msg_tbl_length' entries
-- for the one equal to msg. If it is found return the ID. In case when
-- the string is not found return -1. */
--static int
--msg_to_cat_id (msg)
-- const char *msg;
--{
-- int cnt;
--
-- for (cnt = 0; cnt < _msg_tbl_length; ++cnt)
-- if (strcmp (msg, _msg_tbl[cnt]._msg) == 0)
-- return _msg_tbl[cnt]._msg_number;
--
-- return -1;
--}
--
--
--/* @@ begin of epilog @@ */
--
--/* We don't want libintl.a to depend on any other library. So we
-- avoid the non-standard function stpcpy. In GNU C Library this
-- function is available, though. Also allow the symbol HAVE_STPCPY
-- to be defined. */
--#if !_LIBC && !HAVE_STPCPY
--static char *
--stpcpy (dest, src)
-- char *dest;
-- const char *src;
--{
-- while ((*dest++ = *src++) != '\0')
-- /* Do nothing. */ ;
-- return dest - 1;
--}
--#endif
---- lrzsz-0.12.20.safe/intl/ChangeLog 1998-04-26 09:22:35.000000000 -0400
-+++ lrzsz-0.12.20/intl/ChangeLog 2004-09-12 14:40:34.349749000 -0400
-@@ -1,1022 +1,4 @@
--1997-09-06 02:10 Ulrich Drepper <drepper@cygnus.com>
--
-- * intlh.inst.in: Reformat copyright.
--
--1997-08-19 15:22 Ulrich Drepper <drepper@cygnus.com>
--
-- * dcgettext.c (DCGETTEXT): Remove wrong comment.
--
--1997-08-16 00:13 Ulrich Drepper <drepper@cygnus.com>
--
-- * Makefile.in (install-data): Don't change directory to install.
--
--1997-08-01 14:30 Ulrich Drepper <drepper@cygnus.com>
--
-- * cat-compat.c: Fix copyright.
--
-- * localealias.c: Don't define strchr unless !HAVE_STRCHR.
--
-- * loadmsgcat.c: Update copyright. Fix typos.
--
-- * l10nflist.c: Don't define strchr unless !HAVE_STRCHR.
-- (_nl_make_l10nflist): Handle sponsor and revision correctly.
--
-- * gettext.c: Update copyright.
-- * gettext.h: Likewise.
-- * hash-string.h: Likewise.
--
-- * finddomain.c: Remoave dead code. Define strchr only if
-- !HAVE_STRCHR.
--
-- * explodename.c: Include <sys/types.h>.
--
-- * explodename.c: Reformat copyright text.
-- (_nl_explode_name): Fix typo.
--
-- * dcgettext.c: Define and use __set_errno.
-- (guess_category_value): Don't use setlocale if HAVE_LC_MESSAGES is
-- not defined.
--
-- * bindtextdom.c: Pretty printing.
--
--1997-05-01 02:25 Ulrich Drepper <drepper@cygnus.com>
--
-- * dcgettext.c (guess_category_value): Don't depend on
-- HAVE_LC_MESSAGES. We don't need the macro here.
-- Patch by Bruno Haible <haible@ilog.fr>.
--
-- * cat-compat.c (textdomain): DoN't refer to HAVE_SETLOCALE_NULL
-- macro. Instead use HAVE_LOCALE_NULL and define it when using
-- glibc, as in dcgettext.c.
-- Patch by Bruno Haible <haible@ilog.fr>.
--
-- * Makefile.in (CPPFLAGS): New variable. Reported by Franc,ois
-- Pinard.
--
--Mon Mar 10 06:51:17 1997 Ulrich Drepper <drepper@cygnus.com>
--
-- * Makefile.in: Implement handling of libtool.
--
-- * gettextP.h: Change data structures for use of generic lowlevel
-- i18n file handling.
--
--Wed Dec 4 20:21:18 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * textdomain.c: Put parentheses around arguments of memcpy macro
-- definition.
-- * localealias.c: Likewise.
-- * l10nflist.c: Likewise.
-- * finddomain.c: Likewise.
-- * bindtextdom.c: Likewise.
-- Reported by Thomas Esken.
--
--Mon Nov 25 22:57:51 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * textdomain.c: Move definition of `memcpy` macro to right
-- position.
--
--Fri Nov 22 04:01:58 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * finddomain.c [!HAVE_STRING_H && !_LIBC]: Define memcpy using
-- bcopy if not already defined. Reported by Thomas Esken.
-- * bindtextdom.c: Likewise.
-- * l10nflist.c: Likewise.
-- * localealias.c: Likewise.
-- * textdomain.c: Likewise.
--
--Tue Oct 29 11:10:27 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * Makefile.in (libdir): Change to use exec_prefix instead of
-- prefix. Reported by Knut-HåvardAksnes <etokna@eto.ericsson.se>.
--
--Sat Aug 31 03:07:09 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * l10nflist.c (_nl_normalize_codeset): We convert to lower case,
-- so don't prepend uppercase `ISO' for only numeric arg.
--
--Fri Jul 19 00:15:46 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * l10nflist.c: Move inclusion of argz.h, ctype.h, stdlib.h after
-- definition of _GNU_SOURCE. Patch by Roland McGrath.
--
-- * Makefile.in (uninstall): Fix another bug with `for' loop and
-- empty arguments. Patch by Jim Meyering. Correct name os
-- uninstalled files: no intl- prefix anymore.
--
-- * Makefile.in (install-data): Again work around shells which
-- cannot handle mpty for list. Reported by Jim Meyering.
--
--Sat Jul 13 18:11:35 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * Makefile.in (install): Split goal. Now depend on install-exec
-- and install-data.
-- (install-exec, install-data): New goals. Created from former
-- install goal.
-- Reported by Karl Berry.
--
--Sat Jun 22 04:58:14 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * Makefile.in (MKINSTALLDIRS): New variable. Path to
-- mkinstalldirs script.
-- (install): use MKINSTALLDIRS variable or if the script is not present
-- try to find it in the $top_scrdir).
--
--Wed Jun 19 02:56:56 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * l10nflist.c: Linux libc *partly* includes the argz_* functions.
-- Grr. Work around by renaming the static version and use macros
-- for renaming.
--
--Tue Jun 18 20:11:17 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * l10nflist.c: Correct presence test macros of __argz_* functions.
--
-- * l10nflist.c: Include <argz.h> based on test of it instead when
-- __argz_* functions are available.
-- Reported by Andreas Schwab.
--
--Thu Jun 13 15:17:44 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * explodename.c, l10nflist.c: Define NULL for dumb systems.
--
--Tue Jun 11 17:05:13 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * intlh.inst.in, libgettext.h (dcgettext): Rename local variable
-- result to __result to prevent name clash.
--
-- * l10nflist.c, localealias.c, dcgettext.c: Define _GNU_SOURCE to
-- get prototype for stpcpy and strcasecmp.
--
-- * intlh.inst.in, libgettext.h: Move declaration of
-- `_nl_msg_cat_cntr' outside __extension__ block to prevent warning
-- from gcc's -Wnested-extern option.
--
--Fri Jun 7 01:58:00 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * Makefile.in (install): Remove comment.
--
--Thu Jun 6 17:28:17 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * Makefile.in (install): Work around for another Buglix stupidity.
-- Always use an `else' close for `if's. Reported by Nelson Beebe.
--
-- * Makefile.in (intlh.inst): Correct typo in phony rule.
-- Reported by Nelson Beebe.
--
--Thu Jun 6 01:49:52 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * dcgettext.c (read_alias_file): Rename variable alloca_list to
-- block_list as the macro calls assume.
-- Patch by Eric Backus.
--
-- * localealias.c [!HAVE_ALLOCA]: Define alloca as macro using
-- malloc.
-- (read_alias_file): Rename varriabe alloca_list to block_list as the
-- macro calls assume.
-- Patch by Eric Backus.
--
-- * l10nflist.c: Correct conditional for <argz.h> inclusion.
-- Reported by Roland McGrath.
--
-- * Makefile.in (all): Depend on all-@USE_INCLUDED_LIBINTL@, not
-- all-@USE_NLS@.
--
-- * Makefile.in (install): intlh.inst comes from local dir, not
-- $(srcdir).
--
-- * Makefile.in (intlh.inst): Special handling of this goal. If
-- used in gettext, this is really a rul to construct this file. If
-- used in any other package it is defined as a .PHONY rule with
-- empty body.
--
-- * finddomain.c: Extract locale file information handling into
-- l10nfile.c. Rename local stpcpy__ function to stpcpy.
--
-- * dcgettext.c (stpcpy): Add local definition.
--
-- * l10nflist.c: Solve some portability problems. Patches partly by
-- Thomas Esken. Add local definition of stpcpy.
--
--Tue Jun 4 02:47:49 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * intlh.inst.in: Don't depend including <locale.h> on
-- HAVE_LOCALE_H. Instead configure must rewrite this fiile
-- depending on the result of the configure run.
--
-- * Makefile.in (install): libintl.inst is now called intlh.inst.
-- Add rules for updating intlh.inst from intlh.inst.in.
--
-- * libintl.inst: Renamed to intlh.inst.in.
--
-- * localealias.c, dcgettext.c [__GNUC__]: Define HAVE_ALLOCA to 1
-- because gcc has __buitlin_alloca.
-- Reported by Roland McGrath.
--
--Mon Jun 3 00:32:16 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * Makefile.in (installcheck): New goal to fulfill needs of
-- automake's distcheck.
--
-- * Makefile.in (install): Reorder commands so that VERSION is
-- found.
--
-- * Makefile.in (gettextsrcdir): Now use subdirectory intl/ in
-- @datadir@/gettext.
-- (COMSRCS): Add l10nfile.c.
-- (OBJECTS): Add l10nfile.o.
-- (DISTFILES): Rename to DISTFILE.normal. Remove $(DISTFILES.common).
-- (DISTFILE.gettext): Remove $(DISTFILES.common).
-- (all-gettext): Remove goal.
-- (install): If $(PACKAGE) = gettext install, otherwose do nothing. No
-- package but gettext itself should install libintl.h + headers.
-- (dist): Extend goal to work for gettext, too.
-- (dist-gettext): Remove goal.
--
-- * dcgettext.c [!HAVE_ALLOCA]: Define macro alloca by using malloc.
--
--Sun Jun 2 17:33:06 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * loadmsgcat.c (_nl_load_domain): Parameter is now comes from
-- find_l10nfile.
--
--Sat Jun 1 02:23:03 1996 Ulrich Drepper <drepper@cygnus.com>
--
-- * l10nflist.c (__argz_next): Add definition.
--
-- * dcgettext.c [!HAVE_ALLOCA]: Add code for handling missing alloca
-- code. Use new l10nfile handling.
--
-- * localealias.c [!HAVE_ALLOCA]: Add code for handling missing
-- alloca code.
--
-- * l10nflist.c: Initial revision.
--
--Tue Apr 2 18:51:18 1996 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (all-gettext): New goal. Same as all-yes.
--
--Thu Mar 28 23:01:22 1996 Karl Eichwalder <ke@ke.central.de>
--
-- * Makefile.in (gettextsrcdir): Define using @datadir@.
--
--Tue Mar 26 12:39:14 1996 Ulrich Drepper <drepper@myware>
--
-- * finddomain.c: Include <ctype.h>. Reported by Roland McGrath.
--
--Sat Mar 23 02:00:35 1996 Ulrich Drepper <drepper@myware>
--
-- * finddomain.c (stpcpy): Rename to stpcpy__ to prevent clashing
-- with external declaration.
--
--Sat Mar 2 00:47:09 1996 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (all-no): Rename from all_no.
--
--Sat Feb 17 00:25:59 1996 Ulrich Drepper <drepper@myware>
--
-- * gettextP.h [loaded_domain]: Array `successor' must now contain up
-- to 63 elements (because of codeset name normalization).
--
-- * finddomain.c: Implement codeset name normalization.
--
--Thu Feb 15 04:39:09 1996 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (all): Define to `all-@USE_NLS@'.
-- (all-yes, all_no): New goals. `all-no' is noop, `all-yes'
-- is former all.
--
--Mon Jan 15 21:46:01 1996 Howard Gayle <howard@hal.com>
--
-- * localealias.c (alias_compare): Increment string pointers in loop
-- of strcasecmp replacement.
--
--Fri Dec 29 21:16:34 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (install-src): Who commented this goal out ? :-)
--
--Fri Dec 29 15:08:16 1995 Ulrich Drepper <drepper@myware>
--
-- * dcgettext.c (DCGETTEXT): Save `errno'. Failing system calls
-- should not effect it because a missing catalog is no error.
-- Reported by Harald K<o:>nig <koenig@tat.physik.uni-tuebingen.de>.
--
--Tue Dec 19 22:09:13 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (Makefile): Explicitly use $(SHELL) for running
-- shell scripts.
--
--Fri Dec 15 17:34:59 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
--
-- * Makefile.in (install-src): Only install library and header when
-- we use the own implementation. Don't do it when using the
-- system's gettext or catgets functions.
--
-- * dcgettext.c (find_msg): Must not swap domain->hash_size here.
--
--Sat Dec 9 16:24:37 1995 Ulrich Drepper <drepper@myware>
--
-- * localealias.c, libintl.inst, libgettext.h, hash-string.h,
-- gettextP.h, finddomain.c, dcgettext.c, cat-compat.c:
-- Use PARAMS instead of __P. Suggested by Roland McGrath.
--
--Tue Dec 5 11:39:14 1995 Larry Schwimmer <rosebud@cyclone.stanford.edu>
--
-- * libgettext.h: Use `#if !defined (_LIBINTL_H)' instead of `#if
-- !_LIBINTL_H' because Solaris defines _LIBINTL_H as empty.
--
--Mon Dec 4 15:42:07 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (install-src):
-- Install libintl.inst instead of libintl.h.install.
--
--Sat Dec 2 22:51:38 1995 Marcus Daniels <marcus@sysc.pdx.edu>
--
-- * cat-compat.c (textdomain):
-- Reverse order in which files are tried you load. First
-- try local file, when this failed absolute path.
--
--Wed Nov 29 02:03:53 1995 Nelson H. F. Beebe <beebe@math.utah.edu>
--
-- * cat-compat.c (bindtextdomain): Add missing { }.
--
--Sun Nov 26 18:21:41 1995 Ulrich Drepper <drepper@myware>
--
-- * libintl.inst: Add missing __P definition. Reported by Nelson Beebe.
--
-- * Makefile.in:
-- Add dummy `all' and `dvi' goals. Reported by Tom Tromey.
--
--Sat Nov 25 16:12:01 1995 Franc,ois Pinard <pinard@iro.umontreal.ca>
--
-- * hash-string.h: Capitalize arguments of macros.
--
--Sat Nov 25 12:01:36 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (DISTFILES): Prevent files names longer than 13
-- characters. libintl.h.glibc->libintl.glibc,
-- libintl.h.install->libintl.inst. Reported by Joshua R. Poulson.
--
--Sat Nov 25 11:31:12 1995 Eric Backus <ericb@lsid.hp.com>
--
-- * dcgettext.c: Fix bug in preprocessor conditionals.
--
--Sat Nov 25 02:35:27 1995 Nelson H. F. Beebe <beebe@math.utah.edu>
--
-- * libgettext.h: Solaris cc does not understand
-- #if !SYMBOL1 && !SYMBOL2. Sad but true.
--
--Thu Nov 23 16:22:14 1995 Ulrich Drepper <drepper@myware>
--
-- * hash-string.h (hash_string):
-- Fix for machine with >32 bit `unsigned long's.
--
-- * dcgettext.c (DCGETTEXT):
-- Fix horrible bug in loop for alternative translation.
--
--Thu Nov 23 01:45:29 1995 Ulrich Drepper <drepper@myware>
--
-- * po2tbl.sed.in, linux-msg.sed, xopen-msg.sed:
-- Some further simplifications in message number generation.
--
--Mon Nov 20 21:08:43 1995 Ulrich Drepper <drepper@myware>
--
-- * libintl.h.glibc: Use __const instead of const in prototypes.
--
-- * Makefile.in (install-src):
-- Install libintl.h.install instead of libintl.h. This
-- is a stripped-down version. Suggested by Peter Miller.
--
-- * libintl.h.install, libintl.h.glibc: Initial revision.
--
-- * localealias.c (_nl_expand_alias, read_alias_file):
-- Protect prototypes in type casts by __P.
--
--Tue Nov 14 16:43:58 1995 Ulrich Drepper <drepper@myware>
--
-- * hash-string.h: Correct prototype for hash_string.
--
--Sun Nov 12 12:42:30 1995 Ulrich Drepper <drepper@myware>
--
-- * hash-string.h (hash_string): Add prototype.
--
-- * gettextP.h: Fix copyright.
-- (SWAP): Add prototype.
--
--Wed Nov 8 22:56:33 1995 Ulrich Drepper <drepper@myware>
--
-- * localealias.c (read_alias_file): Forgot sizeof.
-- Avoid calling *printf function. This introduces a big overhead.
-- Patch by Roland McGrath.
--
--Tue Nov 7 14:21:08 1995 Ulrich Drepper <drepper@myware>
--
-- * finddomain.c, cat-compat.c: Wrong indentation in #if for stpcpy.
--
-- * finddomain.c (stpcpy):
-- Define substitution function local. The macro was to flaky.
--
-- * cat-compat.c: Fix typo.
--
-- * xopen-msg.sed, linux-msg.sed:
-- While bringing message number to right place only accept digits.
--
-- * linux-msg.sed, xopen-msg.sed: Now that the counter does not have
-- leading 0s we don't need to remove them. Reported by Marcus
-- Daniels.
--
-- * Makefile.in (../po/cat-id-tbl.o): Use $(top_srdir) in
-- dependency. Reported by Marcus Daniels.
--
-- * cat-compat.c: (stpcpy) [!_LIBC && !HAVE_STPCPY]: Define replacement.
-- Generally cleanup using #if instead of #ifndef.
--
-- * Makefile.in: Correct typos in comment. By Franc,ois Pinard.
--
--Mon Nov 6 00:27:02 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (install-src): Don't install libintl.h and libintl.a
-- if we use an available gettext implementation.
--
--Sun Nov 5 22:02:08 1995 Ulrich Drepper <drepper@myware>
--
-- * libgettext.h: Fix typo: HAVE_CATGETTS -> HAVE_CATGETS. Reported
-- by Franc,ois Pinard.
--
-- * libgettext.h: Use #if instead of #ifdef/#ifndef.
--
-- * finddomain.c:
-- Comments describing what has to be done should start with FIXME.
--
--Sun Nov 5 19:38:01 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (DISTFILES): Split. Use DISTFILES with normal meaning.
-- DISTFILES.common names the files common to both dist goals.
-- DISTFILES.gettext are the files only distributed in GNU gettext.
--
--Sun Nov 5 17:32:54 1995 Ulrich Drepper <drepper@myware>
--
-- * dcgettext.c (DCGETTEXT): Correct searching in derived locales.
-- This was necessary since a change in _nl_find_msg several weeks
-- ago. I really don't know this is still not fixed.
--
--Sun Nov 5 12:43:12 1995 Ulrich Drepper <drepper@myware>
--
-- * loadmsgcat.c (_nl_load_domain): Test for FILENAME == NULL. This
-- might mark a special condition.
--
-- * finddomain.c (make_entry_rec): Don't make illegal entry as decided.
--
-- * Makefile.in (dist): Suppress error message when ln failed.
-- Get files from $(srcdir) explicitly.
--
-- * libgettext.h (gettext_const): Rename to gettext_noop.
--
--Fri Nov 3 07:36:50 1995 Ulrich Drepper <drepper@myware>
--
-- * finddomain.c (make_entry_rec):
-- Protect against wrong locale names by testing mask.
--
-- * libgettext.h (gettext_const): Add macro definition.
-- Capitalize macro arguments.
--
--Thu Nov 2 23:15:51 1995 Ulrich Drepper <drepper@myware>
--
-- * finddomain.c (_nl_find_domain):
-- Test for pointer != NULL before accessing value.
-- Reported by Tom Tromey.
--
-- * gettext.c (NULL):
-- Define as (void*)0 instad of 0. Reported by Franc,ois Pinard.
--
--Mon Oct 30 21:28:52 1995 Ulrich Drepper <drepper@myware>
--
-- * po2tbl.sed.in: Serious typo bug fixed by Jim Meyering.
--
--Sat Oct 28 23:20:47 1995 Ulrich Drepper <drepper@myware>
--
-- * libgettext.h: Disable dcgettext optimization for Solaris 2.3.
--
-- * localealias.c (alias_compare):
-- Peter Miller reported that tolower in some systems is
-- even dumber than I thought. Protect call by `isupper'.
--
--Fri Oct 27 22:22:51 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (libdir, includedir): New variables.
-- (install-src): Install libintl.a and libintl.h in correct dirs.
--
--Fri Oct 27 22:07:29 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (SOURCES): Fix typo: intrl.compat.c -> intl-compat.c.
--
-- * po2tbl.sed.in: Patch for buggy SEDs by Christian von Roques.
--
-- * localealias.c:
-- Fix typo and superflous test. Reported by Christian von Roques.
--
--Fri Oct 6 11:52:05 1995 Ulrich Drepper <drepper@myware>
--
-- * finddomain.c (_nl_find_domain):
-- Correct some remainder from the pre-CEN syntax. Now
-- we don't have a constant number of successors anymore.
--
--Wed Sep 27 21:41:13 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (DISTFILES): Add libintl.h.glibc.
--
-- * Makefile.in (dist-libc): Add goal for packing sources for glibc.
-- (COMSRCS, COMHDRS): Splitted to separate sources shared with glibc.
--
-- * loadmsgcat.c: Forget to continue #if line.
--
-- * localealias.c:
-- [_LIBC]: Rename strcasecmp to __strcasecmp to keep ANSI C name
-- space clean.
--
-- * dcgettext.c, finddomain.c: Better comment to last change.
--
-- * loadmsgcat.c:
-- [_LIBC]: Rename fstat, open, close, read, mmap, and munmap to
-- __fstat, __open, __close, __read, __mmap, and __munmap resp
-- to keep ANSI C name space clean.
--
-- * finddomain.c:
-- [_LIBC]: Rename stpcpy to __stpcpy to keep ANSI C name space clean.
--
-- * dcgettext.c:
-- [_LIBC]: Rename getced and stpcpy to __getcwd and __stpcpy resp to
-- keep ANSI C name space clean.
--
-- * libgettext.h:
-- Include sys/types.h for those old SysV systems out there.
-- Reported by Francesco Potorti`.
--
-- * loadmsgcat.c (use_mmap): Define if compiled for glibc.
--
-- * bindtextdom.c: Include all those standard headers
-- unconditionally if _LIBC is defined.
--
-- * finddomain.c: Fix 2 times defiend -> defined.
--
-- * textdomain.c: Include libintl.h instead of libgettext.h when
-- compiling for glibc. Include all those standard headers
-- unconditionally if _LIBC is defined.
--
-- * localealias.c, loadmsgcat.c: Prepare to be compiled in glibc.
--
-- * gettext.c:
-- Include libintl.h instead of libgettext.h when compiling for glibc.
-- Get NULL from stddef.h if we compile for glibc.
--
-- * finddomain.c: Include libintl.h instead of libgettext.h when
-- compiling for glibc. Include all those standard headers
-- unconditionally if _LIBC is defined.
--
-- * dcgettext.c: Include all those standard headers unconditionally
-- if _LIBC is defined.
--
-- * dgettext.c: If compiled in glibc include libintl.h instead of
-- libgettext.h.
-- (locale.h): Don't rely on HAVE_LOCALE_H when compiling for glibc.
--
-- * dcgettext.c: If compiled in glibc include libintl.h instead of
-- libgettext.h.
-- (getcwd): Don't rely on HAVE_GETCWD when compiling for glibc.
--
-- * bindtextdom.c:
-- If compiled in glibc include libintl.h instead of libgettext.h.
--
--Mon Sep 25 22:23:06 1995 Ulrich Drepper <drepper@myware>
--
-- * localealias.c (_nl_expand_alias): Don't call bsearch if NMAP <= 0.
-- Reported by Marcus Daniels.
--
-- * cat-compat.c (bindtextdomain):
-- String used in putenv must not be recycled.
-- Reported by Marcus Daniels.
--
-- * libgettext.h (__USE_GNU_GETTEXT):
-- Additional symbol to signal that we use GNU gettext
-- library.
--
-- * cat-compat.c (bindtextdomain):
-- Fix bug with the strange stpcpy replacement.
-- Reported by Nelson Beebe.
--
--Sat Sep 23 08:23:51 1995 Ulrich Drepper <drepper@myware>
--
-- * cat-compat.c: Include <string.h> for stpcpy prototype.
--
-- * localealias.c (read_alias_file):
-- While expand strdup code temporary variable `cp' hided
-- higher level variable with same name. Rename to `tp'.
--
-- * textdomain.c (textdomain):
-- Avoid warning by using temporary variable in strdup code.
--
-- * finddomain.c (_nl_find_domain): Remove unused variable `application'.
--
--Thu Sep 21 15:51:44 1995 Ulrich Drepper <drepper@myware>
--
-- * localealias.c (alias_compare):
-- Use strcasecmp() only if available. Else use
-- implementation in place.
--
-- * intl-compat.c:
-- Wrapper functions now call *__ functions instead of __*.
--
-- * libgettext.h: Declare prototypes for *__ functions instead for __*.
--
-- * cat-compat.c, loadmsgcat.c:
-- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part
-- of the standard libc and so prevent libintl.a from being used
-- standalone.
--
-- * bindtextdom.c:
-- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part
-- of the standard libc and so prevent libintl.a from being used
-- standalone.
-- Rename to bindtextdomain__ if not used in GNU C Library.
--
-- * dgettext.c:
-- Rename function to dgettext__ if not used in GNU C Library.
--
-- * gettext.c:
-- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part
-- of the standard libc and so prevent libintl.a from being used
-- standalone.
-- Functions now called gettext__ if not used in GNU C Library.
--
-- * dcgettext.c, localealias.c, textdomain.c, finddomain.c:
-- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part
-- of the standard libc and so prevent libintl.a from being used
-- standalone.
--
--Sun Sep 17 23:14:49 1995 Ulrich Drepper <drepper@myware>
--
-- * finddomain.c: Correct some bugs in handling of CEN standard
-- locale definitions.
--
--Thu Sep 7 01:49:28 1995 Ulrich Drepper <drepper@myware>
--
-- * finddomain.c: Implement CEN syntax.
--
-- * gettextP.h (loaded_domain): Extend number of successors to 31.
--
--Sat Aug 19 19:25:29 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (aliaspath): Remove path to X11 locale dir.
--
-- * Makefile.in: Make install-src depend on install. This helps
-- gettext to install the sources and other packages can use the
-- install goal.
--
--Sat Aug 19 15:19:33 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (uninstall): Remove stuff installed by install-src.
--
--Tue Aug 15 13:13:53 1995 Ulrich Drepper <drepper@myware>
--
-- * VERSION.in: Initial revision.
--
-- * Makefile.in (DISTFILES):
-- Add VERSION file. This is not necessary for gettext, but
-- for other packages using this library.
--
--Tue Aug 15 06:16:44 1995 Ulrich Drepper <drepper@myware>
--
-- * gettextP.h (_nl_find_domain):
-- New prototype after changing search strategy.
--
-- * finddomain.c (_nl_find_domain):
-- We now try only to find a specified catalog. Fall back to other
-- catalogs listed in the locale list is now done in __dcgettext.
--
-- * dcgettext.c (__dcgettext):
-- Now we provide message fall back even to different languages.
-- I.e. if a message is not available in one language all the other
-- in the locale list a tried. Formerly fall back was only possible
-- within one language. Implemented by moving one loop from
-- _nl_find_domain to here.
--
--Mon Aug 14 23:45:50 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (gettextsrcdir):
-- Directory where source of GNU gettext library are made
-- available.
-- (INSTALL, INSTALL_DATA): Programs used for installing sources.
-- (gettext-src): New. Rule to install GNU gettext sources for use in
-- gettextize shell script.
--
--Sun Aug 13 14:40:48 1995 Ulrich Drepper <drepper@myware>
--
-- * loadmsgcat.c (_nl_load_domain):
-- Use mmap for loading only when munmap function is
-- also available.
--
-- * Makefile.in (install): Depend on `all' goal.
--
--Wed Aug 9 11:04:33 1995 Ulrich Drepper <drepper@myware>
--
-- * localealias.c (read_alias_file):
-- Do not overwrite '\n' when terminating alias value string.
--
-- * localealias.c (read_alias_file):
-- Handle long lines. Ignore the rest not fitting in
-- the buffer after the initial `fgets' call.
--
--Wed Aug 9 00:54:29 1995 Ulrich Drepper <drepper@myware>
--
-- * gettextP.h (_nl_load_domain):
-- Add prototype, replacing prototype for _nl_load_msg_cat.
--
-- * finddomain.c (_nl_find_domain):
-- Remove unneeded variable filename and filename_len.
-- (expand_alias): Remove prototype because functions does not
-- exist anymore.
--
-- * localealias.c (read_alias_file):
-- Change type of fname_len parameter to int.
-- (xmalloc): Add prototype.
--
-- * loadmsgcat.c: Better prototypes for xmalloc.
--
--Tue Aug 8 22:30:39 1995 Ulrich Drepper <drepper@myware>
--
-- * finddomain.c (_nl_find_domain):
-- Allow alias name to be constructed from the four components.
--
-- * Makefile.in (aliaspath): New variable. Set to preliminary value.
-- (SOURCES): Add localealias.c.
-- (OBJECTS): Add localealias.o.
--
-- * gettextP.h: Add prototype for _nl_expand_alias.
--
-- * finddomain.c: Aliasing handled in intl/localealias.c.
--
-- * localealias.c: Aliasing for locale names.
--
-- * bindtextdom.c: Better prototypes for xmalloc and xstrdup.
--
--Mon Aug 7 23:47:42 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (DISTFILES): gettext.perl is now found in misc/.
--
-- * cat-compat.c (bindtextdomain):
-- Correct implementation. dirname parameter was not used.
-- Reported by Marcus Daniels.
--
-- * gettextP.h (loaded_domain):
-- New fields `successor' and `decided' for oo, lazy
-- message handling implementation.
--
-- * dcgettext.c:
-- Adopt for oo, lazy message handliing.
-- Now we can inherit translations from less specific locales.
-- (find_msg): New function.
--
-- * loadmsgcat.c, finddomain.c:
-- Complete rewrite. Implement oo, lazy message handling :-).
-- We now have an additional environment variable `LANGUAGE' with
-- a higher priority than LC_ALL for the LC_MESSAGE locale.
-- Here we can set a colon separated list of specifications each
-- of the form `language[_territory[.codeset]][@modifier]'.
--
--Sat Aug 5 09:55:42 1995 Ulrich Drepper <drepper@myware>
--
-- * finddomain.c (unistd.h):
-- Include to get _PC_PATH_MAX defined on system having it.
--
--Fri Aug 4 22:42:00 1995 Ulrich Drepper <drepper@myware>
--
-- * finddomain.c (stpcpy): Include prototype.
--
-- * Makefile.in (dist): Remove `copying instead' message.
--
--Wed Aug 2 18:52:03 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (ID, TAGS): Do not use $^.
--
--Tue Aug 1 20:07:11 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (TAGS, ID): Use $^ as command argument.
-- (TAGS): Give etags -o option t write to current directory,
-- not $(srcdir).
-- (ID): Use $(srcdir) instead os $(top_srcdir)/src.
-- (distclean): Remove ID.
--
--Sun Jul 30 11:51:46 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (gnulocaledir):
-- New variable, always using share/ for data directory.
-- (DEFS): Add GNULOCALEDIR, used in finddomain.c.
--
-- * finddomain.c (_nl_default_dirname):
-- Set to GNULOCALEDIR, because it always has to point
-- to the directory where GNU gettext Library writes it to.
--
-- * intl-compat.c (textdomain, bindtextdomain):
-- Undefine macros before function definition.
--
--Sat Jul 22 01:10:02 1995 Ulrich Drepper <drepper@myware>
--
-- * libgettext.h (_LIBINTL_H):
-- Protect definition in case where this file is included as
-- libgettext.h on Solaris machines. Add comment about this.
--
--Wed Jul 19 02:36:42 1995 Ulrich Drepper <drepper@myware>
--
-- * intl-compat.c (textdomain): Correct typo.
--
--Wed Jul 19 01:51:35 1995 Ulrich Drepper <drepper@myware>
--
-- * dcgettext.c (dcgettext): Function now called __dcgettext.
--
-- * dgettext.c (dgettext): Now called __dgettext and calls
-- __dcgettext.
--
-- * gettext.c (gettext):
-- Function now called __gettext and calls __dgettext.
--
-- * textdomain.c (textdomain): Function now called __textdomain.
--
-- * bindtextdom.c (bindtextdomain): Function now called
-- __bindtextdomain.
--
-- * intl-compat.c: Initial revision.
--
-- * Makefile.in (SOURCES): Add intl-compat.c.
-- (OBJECTS): We always compile the GNU gettext library functions.
-- OBJECTS contains all objects but cat-compat.o, ../po/cat-if-tbl.o,
-- and intl-compat.o.
-- (GETTOBJS): Contains now only intl-compat.o.
--
-- * libgettext.h:
-- Re-include protection matches dualistic character of libgettext.h.
-- For all functions in GNU gettext library define __ counter part.
--
-- * finddomain.c (strchr): Define as index if not found in C library.
-- (_nl_find_domain): For relative paths paste / in between.
--
--Tue Jul 18 16:37:45 1995 Ulrich Drepper <drepper@myware>
--
-- * loadmsgcat.c, finddomain.c: Add inclusion of sys/types.h.
--
-- * xopen-msg.sed: Fix bug with `msgstr ""' lines.
-- A little bit better comments.
--
--Tue Jul 18 01:18:27 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in:
-- po-mode.el, makelinks, combine-sh are now found in ../misc.
--
-- * po-mode.el, makelinks, combine-sh, elisp-comp:
-- Moved to ../misc/.
--
-- * libgettext.h, gettextP.h, gettext.h: Uniform test for __STDC__.
--
--Sun Jul 16 22:33:02 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (INSTALL, INSTALL_DATA): New variables.
-- (install-data, uninstall): Install/uninstall .elc file.
--
-- * po-mode.el (Installation comment):
-- Add .pox as possible extension of .po files.
--
--Sun Jul 16 13:23:27 1995 Ulrich Drepper <drepper@myware>
--
-- * elisp-comp: Complete new version by Franc,ois: This does not
-- fail when not compiling in the source directory.
--
--Sun Jul 16 00:12:17 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (../po/cat-id-tbl.o):
-- Use $(MAKE) instead of make for recursive make.
--
-- * Makefile.in (.el.elc): Use $(SHELL) instead of /bin/sh.
-- (install-exec): Add missing dummy goal.
-- (install-data, uninstall): @ in multi-line shell command at
-- beginning, not in front of echo. Reported by Eric Backus.
--
--Sat Jul 15 00:21:28 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (DISTFILES):
-- Rename libgettext.perl to gettext.perl to fit in 14 chars
-- file systems.
--
-- * gettext.perl:
-- Rename to gettext.perl to fit in 14 chars file systems.
--
--Thu Jul 13 23:17:20 1995 Ulrich Drepper <drepper@myware>
--
-- * cat-compat.c: If !STDC_HEADERS try to include malloc.h.
--
--Thu Jul 13 20:55:02 1995 Ulrich Drepper <drepper@myware>
--
-- * po2tbl.sed.in: Pretty printing.
--
-- * linux-msg.sed, xopen-msg.sed:
-- Correct bugs with handling substitute flags in branches.
--
-- * hash-string.h (hash_string):
-- Old K&R compilers don't under stand `unsigned char'.
--
-- * gettext.h (nls_uint32):
-- Some old K&R compilers (eg HP) don't understand `unsigned int'.
--
-- * cat-compat.c (msg_to_cat_id): De-ANSI-fy prototypes.
--
--Thu Jul 13 01:34:33 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (ELCFILES): New variable.
-- (DISTFILES): Add elisp-comp.
-- Add implicit rule for .el -> .elc compilation.
-- (install-data): install $ELCFILES
-- (clean): renamed po-to-tbl and po-to-msg to po2tbl and po2msg resp.
--
-- * elisp-comp: Initial revision
--
--Wed Jul 12 16:14:52 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in:
-- cat-id-tbl.c is now found in po/. This enables us to use an identical
-- intl/ directory in all packages.
--
-- * dcgettext.c (dcgettext): hashing does not work for table size <= 2.
--
-- * textdomain.c: fix typo (#if def -> #if defined)
--
--Tue Jul 11 18:44:43 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in (stamp-cat-id): use top_srcdir to address source files
-- (DISTFILES,distclean): move tupdate.perl to src/
--
-- * po-to-tbl.sed.in:
-- add additional jump to clear change flag to recognize multiline strings
--
--Tue Jul 11 01:32:50 1995 Ulrich Drepper <drepper@myware>
--
-- * textdomain.c: Protect inclusion of stdlib.h and string.h.
--
-- * loadmsgcat.c: Protect inclusion of stdlib.h.
--
-- * libgettext.h: Protect inclusion of locale.h.
-- Allow use in C++ programs.
-- Define NULL is not happened already.
--
-- * Makefile.in (DISTFILES): ship po-to-tbl.sed.in instead of
-- po-to-tbl.sed.
-- (distclean): remove po-to-tbl.sed and tupdate.perl.
--
-- * tupdate.perl.in: Substitute Perl path even in exec line.
-- Don't include entries without translation from old .po file.
--
--Tue Jul 4 00:41:51 1995 Ulrich Drepper <drepper@myware>
--
-- * tupdate.perl.in: use "Updated: " in msgid "".
--
-- * cat-compat.c: Fix typo (LOCALDIR -> LOCALEDIR).
-- Define getenv if !__STDC__.
--
-- * bindtextdom.c: Protect stdlib.h and string.h inclusion.
-- Define free if !__STDC__.
--
-- * finddomain.c: Change DEF_MSG_DOM_DIR to LOCALEDIR.
-- Define free if !__STDC__.
--
-- * cat-compat.c: Change DEF_MSG_DOM_DIR to LOCALEDIR.
--
--Mon Jul 3 23:56:30 1995 Ulrich Drepper <drepper@myware>
--
-- * Makefile.in: Use LOCALEDIR instead of DEF_MSG_DOM_DIR.
-- Remove unneeded $(srcdir) from Makefile.in dependency.
--
-- * makelinks: Add copyright and short description.
--
-- * po-mode.el: Last version for 0.7.
--
-- * tupdate.perl.in: Fix die message.
--
-- * dcgettext.c: Protect include of string.h.
--
-- * gettext.c: Protect include of stdlib.h and further tries to get NULL.
--
-- * finddomain.c: Some corrections in includes.
--
-- * Makefile.in (INCLUDES): Prune list correct path to Makefile.in.
--
-- * po-to-tbl.sed: Adopt for new .po file format.
--
-- * linux-msg.sed, xopen-msg.sed: Adopt for new .po file format.
--
--Sun Jul 2 23:55:03 1995 Ulrich Drepper <drepper@myware>
--
-- * tupdate.perl.in: Complete rewrite for new .po file format.
-+2004-01-29 GNU <bug-gnu-gettext@gnu.org>
-
--Sun Jul 2 02:06:50 1995 Ulrich Drepper <drepper@myware>
-+ * Version 0.14.1 released.
-
-- * First official release. This directory contains all the code
-- needed to internationalize own packages. It provides functions
-- which allow to use the X/Open catgets function with an interface
-- like the Uniforum gettext function. For system which does not
-- have neither of those a complete implementation is provided.
---- lrzsz-0.12.20.safe/intl/config.charset 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/config.charset 2004-09-12 14:40:34.354748240 -0400
-@@ -0,0 +1,608 @@
-+#! /bin/sh
-+# Output a system dependent table of character encoding aliases.
-+#
-+# Copyright (C) 2000-2004 Free Software Foundation, Inc.
-+#
-+# This program is free software; you can redistribute it and/or modify it
-+# under the terms of the GNU Library General Public License as published
-+# by the Free Software Foundation; either version 2, or (at your option)
-+# any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# Library General Public License for more details.
-+#
-+# You should have received a copy of the GNU Library General Public
-+# License along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+# USA.
-+#
-+# The table consists of lines of the form
-+# ALIAS CANONICAL
-+#
-+# ALIAS is the (system dependent) result of "nl_langinfo (CODESET)".
-+# ALIAS is compared in a case sensitive way.
-+#
-+# CANONICAL is the GNU canonical name for this character encoding.
-+# It must be an encoding supported by libiconv. Support by GNU libc is
-+# also desirable. CANONICAL is case insensitive. Usually an upper case
-+# MIME charset name is preferred.
-+# The current list of GNU canonical charset names is as follows.
-+#
-+# name MIME? used by which systems
-+# ASCII, ANSI_X3.4-1968 glibc solaris freebsd darwin
-+# ISO-8859-1 Y glibc aix hpux irix osf solaris freebsd darwin
-+# ISO-8859-2 Y glibc aix hpux irix osf solaris freebsd darwin
-+# ISO-8859-3 Y glibc solaris
-+# ISO-8859-4 Y osf solaris freebsd darwin
-+# ISO-8859-5 Y glibc aix hpux irix osf solaris freebsd darwin
-+# ISO-8859-6 Y glibc aix hpux solaris
-+# ISO-8859-7 Y glibc aix hpux irix osf solaris
-+# ISO-8859-8 Y glibc aix hpux osf solaris
-+# ISO-8859-9 Y glibc aix hpux irix osf solaris
-+# ISO-8859-13 glibc
-+# ISO-8859-14 glibc
-+# ISO-8859-15 glibc aix osf solaris freebsd
-+# KOI8-R Y glibc solaris freebsd darwin
-+# KOI8-U Y glibc freebsd darwin
-+# KOI8-T glibc
-+# CP437 dos
-+# CP775 dos
-+# CP850 aix osf dos
-+# CP852 dos
-+# CP855 dos
-+# CP856 aix
-+# CP857 dos
-+# CP861 dos
-+# CP862 dos
-+# CP864 dos
-+# CP865 dos
-+# CP866 freebsd darwin dos
-+# CP869 dos
-+# CP874 woe32 dos
-+# CP922 aix
-+# CP932 aix woe32 dos
-+# CP943 aix
-+# CP949 osf woe32 dos
-+# CP950 woe32 dos
-+# CP1046 aix
-+# CP1124 aix
-+# CP1125 dos
-+# CP1129 aix
-+# CP1250 woe32
-+# CP1251 glibc solaris darwin woe32
-+# CP1252 aix woe32
-+# CP1253 woe32
-+# CP1254 woe32
-+# CP1255 glibc woe32
-+# CP1256 woe32
-+# CP1257 woe32
-+# GB2312 Y glibc aix hpux irix solaris freebsd darwin
-+# EUC-JP Y glibc aix hpux irix osf solaris freebsd darwin
-+# EUC-KR Y glibc aix hpux irix osf solaris freebsd darwin
-+# EUC-TW glibc aix hpux irix osf solaris
-+# BIG5 Y glibc aix hpux osf solaris freebsd darwin
-+# BIG5-HKSCS glibc solaris
-+# GBK glibc aix osf solaris woe32 dos
-+# GB18030 glibc solaris
-+# SHIFT_JIS Y hpux osf solaris freebsd darwin
-+# JOHAB glibc solaris woe32
-+# TIS-620 glibc aix hpux osf solaris
-+# VISCII Y glibc
-+# TCVN5712-1 glibc
-+# GEORGIAN-PS glibc
-+# HP-ROMAN8 hpux
-+# HP-ARABIC8 hpux
-+# HP-GREEK8 hpux
-+# HP-HEBREW8 hpux
-+# HP-TURKISH8 hpux
-+# HP-KANA8 hpux
-+# DEC-KANJI osf
-+# DEC-HANYU osf
-+# UTF-8 Y glibc aix hpux osf solaris
-+#
-+# Note: Names which are not marked as being a MIME name should not be used in
-+# Internet protocols for information interchange (mail, news, etc.).
-+#
-+# Note: ASCII and ANSI_X3.4-1968 are synonymous canonical names. Applications
-+# must understand both names and treat them as equivalent.
-+#
-+# The first argument passed to this file is the canonical host specification,
-+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-+# or
-+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-+
-+host="$1"
-+os=`echo "$host" | sed -e 's/^[^-]*-[^-]*-\(.*\)$/\1/'`
-+echo "# This file contains a table of character encoding aliases,"
-+echo "# suitable for operating system '${os}'."
-+echo "# It was automatically generated from config.charset."
-+# List of references, updated during installation:
-+echo "# Packages using this file: "
-+case "$os" in
-+ linux-gnulibc1*)
-+ # Linux libc5 doesn't have nl_langinfo(CODESET); therefore
-+ # localcharset.c falls back to using the full locale name
-+ # from the environment variables.
-+ echo "C ASCII"
-+ echo "POSIX ASCII"
-+ for l in af af_ZA ca ca_ES da da_DK de de_AT de_BE de_CH de_DE de_LU \
-+ en en_AU en_BW en_CA en_DK en_GB en_IE en_NZ en_US en_ZA \
-+ en_ZW es es_AR es_BO es_CL es_CO es_DO es_EC es_ES es_GT \
-+ es_HN es_MX es_PA es_PE es_PY es_SV es_US es_UY es_VE et \
-+ et_EE eu eu_ES fi fi_FI fo fo_FO fr fr_BE fr_CA fr_CH fr_FR \
-+ fr_LU ga ga_IE gl gl_ES id id_ID in in_ID is is_IS it it_CH \
-+ it_IT kl kl_GL nl nl_BE nl_NL no no_NO pt pt_BR pt_PT sv \
-+ sv_FI sv_SE; do
-+ echo "$l ISO-8859-1"
-+ echo "$l.iso-8859-1 ISO-8859-1"
-+ echo "$l.iso-8859-15 ISO-8859-15"
-+ echo "$l.iso-8859-15@euro ISO-8859-15"
-+ echo "$l@euro ISO-8859-15"
-+ echo "$l.cp-437 CP437"
-+ echo "$l.cp-850 CP850"
-+ echo "$l.cp-1252 CP1252"
-+ echo "$l.cp-1252@euro CP1252"
-+ #echo "$l.atari-st ATARI-ST" # not a commonly used encoding
-+ echo "$l.utf-8 UTF-8"
-+ echo "$l.utf-8@euro UTF-8"
-+ done
-+ for l in cs cs_CZ hr hr_HR hu hu_HU pl pl_PL ro ro_RO sk sk_SK sl \
-+ sl_SI sr sr_CS sr_YU; do
-+ echo "$l ISO-8859-2"
-+ echo "$l.iso-8859-2 ISO-8859-2"
-+ echo "$l.cp-852 CP852"
-+ echo "$l.cp-1250 CP1250"
-+ echo "$l.utf-8 UTF-8"
-+ done
-+ for l in mk mk_MK ru ru_RU; do
-+ echo "$l ISO-8859-5"
-+ echo "$l.iso-8859-5 ISO-8859-5"
-+ echo "$l.koi8-r KOI8-R"
-+ echo "$l.cp-866 CP866"
-+ echo "$l.cp-1251 CP1251"
-+ echo "$l.utf-8 UTF-8"
-+ done
-+ for l in ar ar_SA; do
-+ echo "$l ISO-8859-6"
-+ echo "$l.iso-8859-6 ISO-8859-6"
-+ echo "$l.cp-864 CP864"
-+ #echo "$l.cp-868 CP868" # not a commonly used encoding
-+ echo "$l.cp-1256 CP1256"
-+ echo "$l.utf-8 UTF-8"
-+ done
-+ for l in el el_GR gr gr_GR; do
-+ echo "$l ISO-8859-7"
-+ echo "$l.iso-8859-7 ISO-8859-7"
-+ echo "$l.cp-869 CP869"
-+ echo "$l.cp-1253 CP1253"
-+ echo "$l.cp-1253@euro CP1253"
-+ echo "$l.utf-8 UTF-8"
-+ echo "$l.utf-8@euro UTF-8"
-+ done
-+ for l in he he_IL iw iw_IL; do
-+ echo "$l ISO-8859-8"
-+ echo "$l.iso-8859-8 ISO-8859-8"
-+ echo "$l.cp-862 CP862"
-+ echo "$l.cp-1255 CP1255"
-+ echo "$l.utf-8 UTF-8"
-+ done
-+ for l in tr tr_TR; do
-+ echo "$l ISO-8859-9"
-+ echo "$l.iso-8859-9 ISO-8859-9"
-+ echo "$l.cp-857 CP857"
-+ echo "$l.cp-1254 CP1254"
-+ echo "$l.utf-8 UTF-8"
-+ done
-+ for l in lt lt_LT lv lv_LV; do
-+ #echo "$l BALTIC" # not a commonly used encoding, wrong encoding name
-+ echo "$l ISO-8859-13"
-+ done
-+ for l in ru_UA uk uk_UA; do
-+ echo "$l KOI8-U"
-+ done
-+ for l in zh zh_CN; do
-+ #echo "$l GB_2312-80" # not a commonly used encoding, wrong encoding name
-+ echo "$l GB2312"
-+ done
-+ for l in ja ja_JP ja_JP.EUC; do
-+ echo "$l EUC-JP"
-+ done
-+ for l in ko ko_KR; do
-+ echo "$l EUC-KR"
-+ done
-+ for l in th th_TH; do
-+ echo "$l TIS-620"
-+ done
-+ for l in fa fa_IR; do
-+ #echo "$l ISIRI-3342" # a broken encoding
-+ echo "$l.utf-8 UTF-8"
-+ done
-+ ;;
-+ linux* | *-gnu*)
-+ # With glibc-2.1 or newer, we don't need any canonicalization,
-+ # because glibc has iconv and both glibc and libiconv support all
-+ # GNU canonical names directly. Therefore, the Makefile does not
-+ # need to install the alias file at all.
-+ # The following applies only to glibc-2.0.x and older libcs.
-+ echo "ISO_646.IRV:1983 ASCII"
-+ ;;
-+ aix*)
-+ echo "ISO8859-1 ISO-8859-1"
-+ echo "ISO8859-2 ISO-8859-2"
-+ echo "ISO8859-5 ISO-8859-5"
-+ echo "ISO8859-6 ISO-8859-6"
-+ echo "ISO8859-7 ISO-8859-7"
-+ echo "ISO8859-8 ISO-8859-8"
-+ echo "ISO8859-9 ISO-8859-9"
-+ echo "ISO8859-15 ISO-8859-15"
-+ echo "IBM-850 CP850"
-+ echo "IBM-856 CP856"
-+ echo "IBM-921 ISO-8859-13"
-+ echo "IBM-922 CP922"
-+ echo "IBM-932 CP932"
-+ echo "IBM-943 CP943"
-+ echo "IBM-1046 CP1046"
-+ echo "IBM-1124 CP1124"
-+ echo "IBM-1129 CP1129"
-+ echo "IBM-1252 CP1252"
-+ echo "IBM-eucCN GB2312"
-+ echo "IBM-eucJP EUC-JP"
-+ echo "IBM-eucKR EUC-KR"
-+ echo "IBM-eucTW EUC-TW"
-+ echo "big5 BIG5"
-+ echo "GBK GBK"
-+ echo "TIS-620 TIS-620"
-+ echo "UTF-8 UTF-8"
-+ ;;
-+ hpux*)
-+ echo "iso88591 ISO-8859-1"
-+ echo "iso88592 ISO-8859-2"
-+ echo "iso88595 ISO-8859-5"
-+ echo "iso88596 ISO-8859-6"
-+ echo "iso88597 ISO-8859-7"
-+ echo "iso88598 ISO-8859-8"
-+ echo "iso88599 ISO-8859-9"
-+ echo "iso885915 ISO-8859-15"
-+ echo "roman8 HP-ROMAN8"
-+ echo "arabic8 HP-ARABIC8"
-+ echo "greek8 HP-GREEK8"
-+ echo "hebrew8 HP-HEBREW8"
-+ echo "turkish8 HP-TURKISH8"
-+ echo "kana8 HP-KANA8"
-+ echo "tis620 TIS-620"
-+ echo "big5 BIG5"
-+ echo "eucJP EUC-JP"
-+ echo "eucKR EUC-KR"
-+ echo "eucTW EUC-TW"
-+ echo "hp15CN GB2312"
-+ #echo "ccdc ?" # what is this?
-+ echo "SJIS SHIFT_JIS"
-+ echo "utf8 UTF-8"
-+ ;;
-+ irix*)
-+ echo "ISO8859-1 ISO-8859-1"
-+ echo "ISO8859-2 ISO-8859-2"
-+ echo "ISO8859-5 ISO-8859-5"
-+ echo "ISO8859-7 ISO-8859-7"
-+ echo "ISO8859-9 ISO-8859-9"
-+ echo "eucCN GB2312"
-+ echo "eucJP EUC-JP"
-+ echo "eucKR EUC-KR"
-+ echo "eucTW EUC-TW"
-+ ;;
-+ osf*)
-+ echo "ISO8859-1 ISO-8859-1"
-+ echo "ISO8859-2 ISO-8859-2"
-+ echo "ISO8859-4 ISO-8859-4"
-+ echo "ISO8859-5 ISO-8859-5"
-+ echo "ISO8859-7 ISO-8859-7"
-+ echo "ISO8859-8 ISO-8859-8"
-+ echo "ISO8859-9 ISO-8859-9"
-+ echo "ISO8859-15 ISO-8859-15"
-+ echo "cp850 CP850"
-+ echo "big5 BIG5"
-+ echo "dechanyu DEC-HANYU"
-+ echo "dechanzi GB2312"
-+ echo "deckanji DEC-KANJI"
-+ echo "deckorean EUC-KR"
-+ echo "eucJP EUC-JP"
-+ echo "eucKR EUC-KR"
-+ echo "eucTW EUC-TW"
-+ echo "GBK GBK"
-+ echo "KSC5601 CP949"
-+ echo "sdeckanji EUC-JP"
-+ echo "SJIS SHIFT_JIS"
-+ echo "TACTIS TIS-620"
-+ echo "UTF-8 UTF-8"
-+ ;;
-+ solaris*)
-+ echo "646 ASCII"
-+ echo "ISO8859-1 ISO-8859-1"
-+ echo "ISO8859-2 ISO-8859-2"
-+ echo "ISO8859-3 ISO-8859-3"
-+ echo "ISO8859-4 ISO-8859-4"
-+ echo "ISO8859-5 ISO-8859-5"
-+ echo "ISO8859-6 ISO-8859-6"
-+ echo "ISO8859-7 ISO-8859-7"
-+ echo "ISO8859-8 ISO-8859-8"
-+ echo "ISO8859-9 ISO-8859-9"
-+ echo "ISO8859-15 ISO-8859-15"
-+ echo "koi8-r KOI8-R"
-+ echo "ansi-1251 CP1251"
-+ echo "BIG5 BIG5"
-+ echo "Big5-HKSCS BIG5-HKSCS"
-+ echo "gb2312 GB2312"
-+ echo "GBK GBK"
-+ echo "GB18030 GB18030"
-+ echo "cns11643 EUC-TW"
-+ echo "5601 EUC-KR"
-+ echo "ko_KR.johap92 JOHAB"
-+ echo "eucJP EUC-JP"
-+ echo "PCK SHIFT_JIS"
-+ echo "TIS620.2533 TIS-620"
-+ #echo "sun_eu_greek ?" # what is this?
-+ echo "UTF-8 UTF-8"
-+ ;;
-+ freebsd* | os2*)
-+ # FreeBSD 4.2 doesn't have nl_langinfo(CODESET); therefore
-+ # localcharset.c falls back to using the full locale name
-+ # from the environment variables.
-+ # Likewise for OS/2. OS/2 has XFree86 just like FreeBSD. Just
-+ # reuse FreeBSD's locale data for OS/2.
-+ echo "C ASCII"
-+ echo "US-ASCII ASCII"
-+ for l in la_LN lt_LN; do
-+ echo "$l.ASCII ASCII"
-+ done
-+ for l in da_DK de_AT de_CH de_DE en_AU en_CA en_GB en_US es_ES \
-+ fi_FI fr_BE fr_CA fr_CH fr_FR is_IS it_CH it_IT la_LN \
-+ lt_LN nl_BE nl_NL no_NO pt_PT sv_SE; do
-+ echo "$l.ISO_8859-1 ISO-8859-1"
-+ echo "$l.DIS_8859-15 ISO-8859-15"
-+ done
-+ for l in cs_CZ hr_HR hu_HU la_LN lt_LN pl_PL sl_SI; do
-+ echo "$l.ISO_8859-2 ISO-8859-2"
-+ done
-+ for l in la_LN lt_LT; do
-+ echo "$l.ISO_8859-4 ISO-8859-4"
-+ done
-+ for l in ru_RU ru_SU; do
-+ echo "$l.KOI8-R KOI8-R"
-+ echo "$l.ISO_8859-5 ISO-8859-5"
-+ echo "$l.CP866 CP866"
-+ done
-+ echo "uk_UA.KOI8-U KOI8-U"
-+ echo "zh_TW.BIG5 BIG5"
-+ echo "zh_TW.Big5 BIG5"
-+ echo "zh_CN.EUC GB2312"
-+ echo "ja_JP.EUC EUC-JP"
-+ echo "ja_JP.SJIS SHIFT_JIS"
-+ echo "ja_JP.Shift_JIS SHIFT_JIS"
-+ echo "ko_KR.EUC EUC-KR"
-+ ;;
-+ netbsd*)
-+ echo "646 ASCII"
-+ echo "ISO8859-1 ISO-8859-1"
-+ echo "ISO8859-2 ISO-8859-2"
-+ echo "ISO8859-4 ISO-8859-4"
-+ echo "ISO8859-5 ISO-8859-5"
-+ echo "ISO8859-15 ISO-8859-15"
-+ echo "eucCN GB2312"
-+ echo "eucJP EUC-JP"
-+ echo "eucKR EUC-KR"
-+ echo "eucTW EUC-TW"
-+ echo "BIG5 BIG5"
-+ echo "SJIS SHIFT_JIS"
-+ ;;
-+ darwin*)
-+ # Darwin 6.8 doesn't have nl_langinfo(CODESET); therefore
-+ # localcharset.c falls back to using the full locale name
-+ # from the environment variables.
-+ echo "C ASCII"
-+ for l in en_AU en_CA en_GB en_US la_LN; do
-+ echo "$l.US-ASCII ASCII"
-+ done
-+ for l in da_DK de_AT de_CH de_DE en_AU en_CA en_GB en_US es_ES \
-+ fi_FI fr_BE fr_CA fr_CH fr_FR is_IS it_CH it_IT nl_BE \
-+ nl_NL no_NO pt_PT sv_SE; do
-+ echo "$l ISO-8859-1"
-+ echo "$l.ISO8859-1 ISO-8859-1"
-+ echo "$l.ISO8859-15 ISO-8859-15"
-+ done
-+ for l in la_LN; do
-+ echo "$l.ISO8859-1 ISO-8859-1"
-+ echo "$l.ISO8859-15 ISO-8859-15"
-+ done
-+ for l in cs_CZ hr_HR hu_HU la_LN pl_PL sl_SI; do
-+ echo "$l.ISO8859-2 ISO-8859-2"
-+ done
-+ for l in la_LN lt_LT; do
-+ echo "$l.ISO8859-4 ISO-8859-4"
-+ done
-+ for l in ru_RU; do
-+ echo "$l.KOI8-R KOI8-R"
-+ echo "$l.ISO8859-5 ISO-8859-5"
-+ echo "$l.CP866 CP866"
-+ done
-+ for l in bg_BG; do
-+ echo "$l.CP1251 CP1251"
-+ done
-+ echo "uk_UA.KOI8-U KOI8-U"
-+ echo "zh_TW.BIG5 BIG5"
-+ echo "zh_TW.Big5 BIG5"
-+ echo "zh_CN.EUC GB2312"
-+ echo "ja_JP.EUC EUC-JP"
-+ echo "ja_JP.SJIS SHIFT_JIS"
-+ echo "ko_KR.EUC EUC-KR"
-+ ;;
-+ beos*)
-+ # BeOS has a single locale, and it has UTF-8 encoding.
-+ echo "* UTF-8"
-+ ;;
-+ msdosdjgpp*)
-+ # DJGPP 2.03 doesn't have nl_langinfo(CODESET); therefore
-+ # localcharset.c falls back to using the full locale name
-+ # from the environment variables.
-+ echo "#"
-+ echo "# The encodings given here may not all be correct."
-+ echo "# If you find that the encoding given for your language and"
-+ echo "# country is not the one your DOS machine actually uses, just"
-+ echo "# correct it in this file, and send a mail to"
-+ echo "# Juan Manuel Guerrero <st001906@hrz1.hrz.tu-darmstadt.de>"
-+ echo "# and Bruno Haible <bruno@clisp.org>."
-+ echo "#"
-+ echo "C ASCII"
-+ # ISO-8859-1 languages
-+ echo "ca CP850"
-+ echo "ca_ES CP850"
-+ echo "da CP865" # not CP850 ??
-+ echo "da_DK CP865" # not CP850 ??
-+ echo "de CP850"
-+ echo "de_AT CP850"
-+ echo "de_CH CP850"
-+ echo "de_DE CP850"
-+ echo "en CP850"
-+ echo "en_AU CP850" # not CP437 ??
-+ echo "en_CA CP850"
-+ echo "en_GB CP850"
-+ echo "en_NZ CP437"
-+ echo "en_US CP437"
-+ echo "en_ZA CP850" # not CP437 ??
-+ echo "es CP850"
-+ echo "es_AR CP850"
-+ echo "es_BO CP850"
-+ echo "es_CL CP850"
-+ echo "es_CO CP850"
-+ echo "es_CR CP850"
-+ echo "es_CU CP850"
-+ echo "es_DO CP850"
-+ echo "es_EC CP850"
-+ echo "es_ES CP850"
-+ echo "es_GT CP850"
-+ echo "es_HN CP850"
-+ echo "es_MX CP850"
-+ echo "es_NI CP850"
-+ echo "es_PA CP850"
-+ echo "es_PY CP850"
-+ echo "es_PE CP850"
-+ echo "es_SV CP850"
-+ echo "es_UY CP850"
-+ echo "es_VE CP850"
-+ echo "et CP850"
-+ echo "et_EE CP850"
-+ echo "eu CP850"
-+ echo "eu_ES CP850"
-+ echo "fi CP850"
-+ echo "fi_FI CP850"
-+ echo "fr CP850"
-+ echo "fr_BE CP850"
-+ echo "fr_CA CP850"
-+ echo "fr_CH CP850"
-+ echo "fr_FR CP850"
-+ echo "ga CP850"
-+ echo "ga_IE CP850"
-+ echo "gd CP850"
-+ echo "gd_GB CP850"
-+ echo "gl CP850"
-+ echo "gl_ES CP850"
-+ echo "id CP850" # not CP437 ??
-+ echo "id_ID CP850" # not CP437 ??
-+ echo "is CP861" # not CP850 ??
-+ echo "is_IS CP861" # not CP850 ??
-+ echo "it CP850"
-+ echo "it_CH CP850"
-+ echo "it_IT CP850"
-+ echo "lt CP775"
-+ echo "lt_LT CP775"
-+ echo "lv CP775"
-+ echo "lv_LV CP775"
-+ echo "nb CP865" # not CP850 ??
-+ echo "nb_NO CP865" # not CP850 ??
-+ echo "nl CP850"
-+ echo "nl_BE CP850"
-+ echo "nl_NL CP850"
-+ echo "nn CP865" # not CP850 ??
-+ echo "nn_NO CP865" # not CP850 ??
-+ echo "no CP865" # not CP850 ??
-+ echo "no_NO CP865" # not CP850 ??
-+ echo "pt CP850"
-+ echo "pt_BR CP850"
-+ echo "pt_PT CP850"
-+ echo "sv CP850"
-+ echo "sv_SE CP850"
-+ # ISO-8859-2 languages
-+ echo "cs CP852"
-+ echo "cs_CZ CP852"
-+ echo "hr CP852"
-+ echo "hr_HR CP852"
-+ echo "hu CP852"
-+ echo "hu_HU CP852"
-+ echo "pl CP852"
-+ echo "pl_PL CP852"
-+ echo "ro CP852"
-+ echo "ro_RO CP852"
-+ echo "sk CP852"
-+ echo "sk_SK CP852"
-+ echo "sl CP852"
-+ echo "sl_SI CP852"
-+ echo "sq CP852"
-+ echo "sq_AL CP852"
-+ echo "sr CP852" # CP852 or CP866 or CP855 ??
-+ echo "sr_CS CP852" # CP852 or CP866 or CP855 ??
-+ echo "sr_YU CP852" # CP852 or CP866 or CP855 ??
-+ # ISO-8859-3 languages
-+ echo "mt CP850"
-+ echo "mt_MT CP850"
-+ # ISO-8859-5 languages
-+ echo "be CP866"
-+ echo "be_BE CP866"
-+ echo "bg CP866" # not CP855 ??
-+ echo "bg_BG CP866" # not CP855 ??
-+ echo "mk CP866" # not CP855 ??
-+ echo "mk_MK CP866" # not CP855 ??
-+ echo "ru CP866"
-+ echo "ru_RU CP866"
-+ echo "uk CP1125"
-+ echo "uk_UA CP1125"
-+ # ISO-8859-6 languages
-+ echo "ar CP864"
-+ echo "ar_AE CP864"
-+ echo "ar_DZ CP864"
-+ echo "ar_EG CP864"
-+ echo "ar_IQ CP864"
-+ echo "ar_IR CP864"
-+ echo "ar_JO CP864"
-+ echo "ar_KW CP864"
-+ echo "ar_MA CP864"
-+ echo "ar_OM CP864"
-+ echo "ar_QA CP864"
-+ echo "ar_SA CP864"
-+ echo "ar_SY CP864"
-+ # ISO-8859-7 languages
-+ echo "el CP869"
-+ echo "el_GR CP869"
-+ # ISO-8859-8 languages
-+ echo "he CP862"
-+ echo "he_IL CP862"
-+ # ISO-8859-9 languages
-+ echo "tr CP857"
-+ echo "tr_TR CP857"
-+ # Japanese
-+ echo "ja CP932"
-+ echo "ja_JP CP932"
-+ # Chinese
-+ echo "zh_CN GBK"
-+ echo "zh_TW CP950" # not CP938 ??
-+ # Korean
-+ echo "kr CP949" # not CP934 ??
-+ echo "kr_KR CP949" # not CP934 ??
-+ # Thai
-+ echo "th CP874"
-+ echo "th_TH CP874"
-+ # Other
-+ echo "eo CP850"
-+ echo "eo_EO CP850"
-+ ;;
-+esac
---- lrzsz-0.12.20.safe/intl/dcgettext.c 1998-04-26 09:22:36.000000000 -0400
-+++ lrzsz-0.12.20/intl/dcgettext.c 2004-09-12 14:40:34.359747480 -0400
-@@ -1,593 +1,56 @@
--/* Implementation of the dcgettext(3) function
-- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-+/* Implementation of the dcgettext(3) function.
-+ Copyright (C) 1995-1999, 2000-2003 Free Software Foundation, Inc.
-
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-
- #ifdef HAVE_CONFIG_H
- # include <config.h>
- #endif
-
--#include <sys/types.h>
--
--#ifdef __GNUC__
--# define alloca __builtin_alloca
--# define HAVE_ALLOCA 1
--#else
--# if defined HAVE_ALLOCA_H || defined _LIBC
--# include <alloca.h>
--# else
--# ifdef _AIX
-- #pragma alloca
--# else
--# ifndef alloca
--char *alloca ();
--# endif
--# endif
--# endif
--#endif
--
--#include <errno.h>
--#ifndef errno
--extern int errno;
--#endif
--#ifndef __set_errno
--# define __set_errno(val) errno = (val)
--#endif
--
--#if defined STDC_HEADERS || defined _LIBC
--# include <stdlib.h>
--#else
--char *getenv ();
--# ifdef HAVE_MALLOC_H
--# include <malloc.h>
--# else
--void free ();
--# endif
--#endif
--
--#if defined HAVE_STRING_H || defined _LIBC
--# ifndef _GNU_SOURCE
--# define _GNU_SOURCE 1
--# endif
--# include <string.h>
--#else
--# include <strings.h>
--#endif
--#if !HAVE_STRCHR && !defined _LIBC
--# ifndef strchr
--# define strchr index
--# endif
--#endif
--
--#if defined HAVE_UNISTD_H || defined _LIBC
--# include <unistd.h>
--#endif
--
--#include "gettext.h"
- #include "gettextP.h"
- #ifdef _LIBC
- # include <libintl.h>
- #else
--# include "libgettext.h"
-+# include "libgnuintl.h"
- #endif
--#include "hash-string.h"
-
- /* @@ end of prolog @@ */
-
--#ifdef _LIBC
--/* Rename the non ANSI C functions. This is required by the standard
-- because some ANSI C functions will require linking with this object
-- file and the name space must not be polluted. */
--# define getcwd __getcwd
--# define stpcpy __stpcpy
--#else
--# if !defined HAVE_GETCWD
--char *getwd ();
--# define getcwd(buf, max) getwd (buf)
--# else
--char *getcwd ();
--# endif
--# ifndef HAVE_STPCPY
--static char *stpcpy PARAMS ((char *dest, const char *src));
--# endif
--#endif
--
--/* Amount to increase buffer size by in each try. */
--#define PATH_INCR 32
--
--/* The following is from pathmax.h. */
--/* Non-POSIX BSD systems might have gcc's limits.h, which doesn't define
-- PATH_MAX but might cause redefinition warnings when sys/param.h is
-- later included (as on MORE/BSD 4.3). */
--#if defined(_POSIX_VERSION) || (defined(HAVE_LIMITS_H) && !defined(__GNUC__))
--# include <limits.h>
--#endif
--
--#ifndef _POSIX_PATH_MAX
--# define _POSIX_PATH_MAX 255
--#endif
--
--#if !defined(PATH_MAX) && defined(_PC_PATH_MAX)
--# define PATH_MAX (pathconf ("/", _PC_PATH_MAX) < 1 ? 1024 : pathconf ("/", _PC_PATH_MAX))
--#endif
--
--/* Don't include sys/param.h if it already has been. */
--#if defined(HAVE_SYS_PARAM_H) && !defined(PATH_MAX) && !defined(MAXPATHLEN)
--# include <sys/param.h>
--#endif
--
--#if !defined(PATH_MAX) && defined(MAXPATHLEN)
--# define PATH_MAX MAXPATHLEN
--#endif
--
--#ifndef PATH_MAX
--# define PATH_MAX _POSIX_PATH_MAX
--#endif
--
--/* XPG3 defines the result of `setlocale (category, NULL)' as:
-- ``Directs `setlocale()' to query `category' and return the current
-- setting of `local'.''
-- However it does not specify the exact format. And even worse: POSIX
-- defines this not at all. So we can use this feature only on selected
-- system (e.g. those using GNU C Library). */
--#ifdef _LIBC
--# define HAVE_LOCALE_NULL
--#endif
--
--/* Name of the default domain used for gettext(3) prior any call to
-- textdomain(3). The default value for this is "messages". */
--const char _nl_default_default_domain[] = "messages";
--
--/* Value used as the default domain for gettext(3). */
--const char *_nl_current_default_domain = _nl_default_default_domain;
--
--/* Contains the default location of the message catalogs. */
--const char _nl_default_dirname[] = GNULOCALEDIR;
--
--/* List with bindings of specific domains created by bindtextdomain()
-- calls. */
--struct binding *_nl_domain_bindings;
--
--/* Prototypes for local functions. */
--static char *find_msg PARAMS ((struct loaded_l10nfile *domain_file,
-- const char *msgid));
--static const char *category_to_name PARAMS ((int category));
--static const char *guess_category_value PARAMS ((int category,
-- const char *categoryname));
--
--
--/* For those loosing systems which don't have `alloca' we have to add
-- some additional code emulating it. */
--#ifdef HAVE_ALLOCA
--/* Nothing has to be done. */
--# define ADD_BLOCK(list, address) /* nothing */
--# define FREE_BLOCKS(list) /* nothing */
--#else
--struct block_list
--{
-- void *address;
-- struct block_list *next;
--};
--# define ADD_BLOCK(list, addr) \
-- do { \
-- struct block_list *newp = (struct block_list *) malloc (sizeof (*newp)); \
-- /* If we cannot get a free block we cannot add the new element to \
-- the list. */ \
-- if (newp != NULL) { \
-- newp->address = (addr); \
-- newp->next = (list); \
-- (list) = newp; \
-- } \
-- } while (0)
--# define FREE_BLOCKS(list) \
-- do { \
-- while (list != NULL) { \
-- struct block_list *old = list; \
-- list = list->next; \
-- free (old); \
-- } \
-- } while (0)
--# undef alloca
--# define alloca(size) (malloc (size))
--#endif /* have alloca */
--
--
- /* Names for the libintl functions are a problem. They must not clash
- with existing names and they should follow ANSI C. But this source
- code is also used in GNU C Library where the names have a __
- prefix. So we have to make a difference here. */
- #ifdef _LIBC
- # define DCGETTEXT __dcgettext
-+# define DCIGETTEXT __dcigettext
- #else
--# define DCGETTEXT dcgettext__
-+# define DCGETTEXT libintl_dcgettext
-+# define DCIGETTEXT libintl_dcigettext
- #endif
-
- /* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
- locale. */
- char *
--DCGETTEXT (domainname, msgid, category)
-- const char *domainname;
-- const char *msgid;
-- int category;
-+DCGETTEXT (const char *domainname, const char *msgid, int category)
- {
--#ifndef HAVE_ALLOCA
-- struct block_list *block_list = NULL;
--#endif
-- struct loaded_l10nfile *domain;
-- struct binding *binding;
-- const char *categoryname;
-- const char *categoryvalue;
-- char *dirname, *xdomainname;
-- char *single_locale;
-- char *retval;
-- int saved_errno = errno;
--
-- /* If no real MSGID is given return NULL. */
-- if (msgid == NULL)
-- return NULL;
--
-- /* If DOMAINNAME is NULL, we are interested in the default domain. If
-- CATEGORY is not LC_MESSAGES this might not make much sense but the
-- defintion left this undefined. */
-- if (domainname == NULL)
-- domainname = _nl_current_default_domain;
--
-- /* First find matching binding. */
-- for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
-- {
-- int compare = strcmp (domainname, binding->domainname);
-- if (compare == 0)
-- /* We found it! */
-- break;
-- if (compare < 0)
-- {
-- /* It is not in the list. */
-- binding = NULL;
-- break;
-- }
-- }
--
-- if (binding == NULL)
-- dirname = (char *) _nl_default_dirname;
-- else if (binding->dirname[0] == '/')
-- dirname = binding->dirname;
-- else
-- {
-- /* We have a relative path. Make it absolute now. */
-- size_t dirname_len = strlen (binding->dirname) + 1;
-- size_t path_max;
-- char *ret;
--
-- path_max = (unsigned) PATH_MAX;
-- path_max += 2; /* The getcwd docs say to do this. */
--
-- dirname = (char *) alloca (path_max + dirname_len);
-- ADD_BLOCK (block_list, dirname);
--
-- __set_errno (0);
-- while ((ret = getcwd (dirname, path_max)) == NULL && errno == ERANGE)
-- {
-- path_max += PATH_INCR;
-- dirname = (char *) alloca (path_max + dirname_len);
-- ADD_BLOCK (block_list, dirname);
-- __set_errno (0);
-- }
--
-- if (ret == NULL)
-- {
-- /* We cannot get the current working directory. Don't signal an
-- error but simply return the default string. */
-- FREE_BLOCKS (block_list);
-- __set_errno (saved_errno);
-- return (char *) msgid;
-- }
--
-- stpcpy (stpcpy (strchr (dirname, '\0'), "/"), binding->dirname);
-- }
--
-- /* Now determine the symbolic name of CATEGORY and its value. */
-- categoryname = category_to_name (category);
-- categoryvalue = guess_category_value (category, categoryname);
--
-- xdomainname = (char *) alloca (strlen (categoryname)
-- + strlen (domainname) + 5);
-- ADD_BLOCK (block_list, xdomainname);
--
-- stpcpy (stpcpy (stpcpy (stpcpy (xdomainname, categoryname), "/"),
-- domainname),
-- ".mo");
--
-- /* Creating working area. */
-- single_locale = (char *) alloca (strlen (categoryvalue) + 1);
-- ADD_BLOCK (block_list, single_locale);
--
--
-- /* Search for the given string. This is a loop because we perhaps
-- got an ordered list of languages to consider for th translation. */
-- while (1)
-- {
-- /* Make CATEGORYVALUE point to the next element of the list. */
-- while (categoryvalue[0] != '\0' && categoryvalue[0] == ':')
-- ++categoryvalue;
-- if (categoryvalue[0] == '\0')
-- {
-- /* The whole contents of CATEGORYVALUE has been searched but
-- no valid entry has been found. We solve this situation
-- by implicitly appending a "C" entry, i.e. no translation
-- will take place. */
-- single_locale[0] = 'C';
-- single_locale[1] = '\0';
-- }
-- else
-- {
-- char *cp = single_locale;
-- while (categoryvalue[0] != '\0' && categoryvalue[0] != ':')
-- *cp++ = *categoryvalue++;
-- *cp = '\0';
-- }
--
-- /* If the current locale value is C (or POSIX) we don't load a
-- domain. Return the MSGID. */
-- if (strcmp (single_locale, "C") == 0
-- || strcmp (single_locale, "POSIX") == 0)
-- {
-- FREE_BLOCKS (block_list);
-- __set_errno (saved_errno);
-- return (char *) msgid;
-- }
--
--
-- /* Find structure describing the message catalog matching the
-- DOMAINNAME and CATEGORY. */
-- domain = _nl_find_domain (dirname, single_locale, xdomainname);
--
-- if (domain != NULL)
-- {
-- retval = find_msg (domain, msgid);
--
-- if (retval == NULL)
-- {
-- int cnt;
--
-- for (cnt = 0; domain->successor[cnt] != NULL; ++cnt)
-- {
-- retval = find_msg (domain->successor[cnt], msgid);
--
-- if (retval != NULL)
-- break;
-- }
-- }
--
-- if (retval != NULL)
-- {
-- FREE_BLOCKS (block_list);
-- __set_errno (saved_errno);
-- return retval;
-- }
-- }
-- }
-- /* NOTREACHED */
-+ return DCIGETTEXT (domainname, msgid, NULL, 0, 0, category);
- }
-
- #ifdef _LIBC
- /* Alias for function name in GNU C Library. */
-+INTDEF(__dcgettext)
- weak_alias (__dcgettext, dcgettext);
- #endif
--
--
--static char *
--find_msg (domain_file, msgid)
-- struct loaded_l10nfile *domain_file;
-- const char *msgid;
--{
-- size_t top, act, bottom;
-- struct loaded_domain *domain;
--
-- if (domain_file->decided == 0)
-- _nl_load_domain (domain_file);
--
-- if (domain_file->data == NULL)
-- return NULL;
--
-- domain = (struct loaded_domain *) domain_file->data;
--
-- /* Locate the MSGID and its translation. */
-- if (domain->hash_size > 2 && domain->hash_tab != NULL)
-- {
-- /* Use the hashing table. */
-- nls_uint32 len = strlen (msgid);
-- nls_uint32 hash_val = hash_string (msgid);
-- nls_uint32 idx = hash_val % domain->hash_size;
-- nls_uint32 incr = 1 + (hash_val % (domain->hash_size - 2));
-- nls_uint32 nstr = W (domain->must_swap, domain->hash_tab[idx]);
--
-- if (nstr == 0)
-- /* Hash table entry is empty. */
-- return NULL;
--
-- if (W (domain->must_swap, domain->orig_tab[nstr - 1].length) == len
-- && strcmp (msgid,
-- domain->data + W (domain->must_swap,
-- domain->orig_tab[nstr - 1].offset)) == 0)
-- return (char *) domain->data + W (domain->must_swap,
-- domain->trans_tab[nstr - 1].offset);
--
-- while (1)
-- {
-- if (idx >= domain->hash_size - incr)
-- idx -= domain->hash_size - incr;
-- else
-- idx += incr;
--
-- nstr = W (domain->must_swap, domain->hash_tab[idx]);
-- if (nstr == 0)
-- /* Hash table entry is empty. */
-- return NULL;
--
-- if (W (domain->must_swap, domain->orig_tab[nstr - 1].length) == len
-- && strcmp (msgid,
-- domain->data + W (domain->must_swap,
-- domain->orig_tab[nstr - 1].offset))
-- == 0)
-- return (char *) domain->data
-- + W (domain->must_swap, domain->trans_tab[nstr - 1].offset);
-- }
-- /* NOTREACHED */
-- }
--
-- /* Now we try the default method: binary search in the sorted
-- array of messages. */
-- bottom = 0;
-- top = domain->nstrings;
-- while (bottom < top)
-- {
-- int cmp_val;
--
-- act = (bottom + top) / 2;
-- cmp_val = strcmp (msgid, domain->data
-- + W (domain->must_swap,
-- domain->orig_tab[act].offset));
-- if (cmp_val < 0)
-- top = act;
-- else if (cmp_val > 0)
-- bottom = act + 1;
-- else
-- break;
-- }
--
-- /* If an translation is found return this. */
-- return bottom >= top ? NULL : (char *) domain->data
-- + W (domain->must_swap,
-- domain->trans_tab[act].offset);
--}
--
--
--/* Return string representation of locale CATEGORY. */
--static const char *
--category_to_name (category)
-- int category;
--{
-- const char *retval;
--
-- switch (category)
-- {
--#ifdef LC_COLLATE
-- case LC_COLLATE:
-- retval = "LC_COLLATE";
-- break;
--#endif
--#ifdef LC_CTYPE
-- case LC_CTYPE:
-- retval = "LC_CTYPE";
-- break;
--#endif
--#ifdef LC_MONETARY
-- case LC_MONETARY:
-- retval = "LC_MONETARY";
-- break;
--#endif
--#ifdef LC_NUMERIC
-- case LC_NUMERIC:
-- retval = "LC_NUMERIC";
-- break;
--#endif
--#ifdef LC_TIME
-- case LC_TIME:
-- retval = "LC_TIME";
-- break;
--#endif
--#ifdef LC_MESSAGES
-- case LC_MESSAGES:
-- retval = "LC_MESSAGES";
-- break;
--#endif
--#ifdef LC_RESPONSE
-- case LC_RESPONSE:
-- retval = "LC_RESPONSE";
-- break;
--#endif
--#ifdef LC_ALL
-- case LC_ALL:
-- /* This might not make sense but is perhaps better than any other
-- value. */
-- retval = "LC_ALL";
-- break;
--#endif
-- default:
-- /* If you have a better idea for a default value let me know. */
-- retval = "LC_XXX";
-- }
--
-- return retval;
--}
--
--/* Guess value of current locale from value of the environment variables. */
--static const char *
--guess_category_value (category, categoryname)
-- int category;
-- const char *categoryname;
--{
-- const char *retval;
--
-- /* The highest priority value is the `LANGUAGE' environment
-- variable. This is a GNU extension. */
-- retval = getenv ("LANGUAGE");
-- if (retval != NULL && retval[0] != '\0')
-- return retval;
--
-- /* `LANGUAGE' is not set. So we have to proceed with the POSIX
-- methods of looking to `LC_ALL', `LC_xxx', and `LANG'. On some
-- systems this can be done by the `setlocale' function itself. */
--#if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES && defined HAVE_LOCALE_NULL
-- return setlocale (category, NULL);
--#else
-- /* Setting of LC_ALL overwrites all other. */
-- retval = getenv ("LC_ALL");
-- if (retval != NULL && retval[0] != '\0')
-- return retval;
--
-- /* Next comes the name of the desired category. */
-- retval = getenv (categoryname);
-- if (retval != NULL && retval[0] != '\0')
-- return retval;
--
-- /* Last possibility is the LANG environment variable. */
-- retval = getenv ("LANG");
-- if (retval != NULL && retval[0] != '\0')
-- return retval;
--
-- /* We use C as the default domain. POSIX says this is implementation
-- defined. */
-- return "C";
--#endif
--}
--
--/* @@ begin of epilog @@ */
--
--/* We don't want libintl.a to depend on any other library. So we
-- avoid the non-standard function stpcpy. In GNU C Library this
-- function is available, though. Also allow the symbol HAVE_STPCPY
-- to be defined. */
--#if !_LIBC && !HAVE_STPCPY
--static char *
--stpcpy (dest, src)
-- char *dest;
-- const char *src;
--{
-- while ((*dest++ = *src++) != '\0')
-- /* Do nothing. */ ;
-- return dest - 1;
--}
--#endif
---- lrzsz-0.12.20.safe/intl/dcigettext.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/dcigettext.c 2004-09-12 14:40:34.369745960 -0400
-@@ -0,0 +1,1219 @@
-+/* Implementation of the internal dcigettext function.
-+ Copyright (C) 1995-1999, 2000-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+/* Tell glibc's <string.h> to provide a prototype for mempcpy().
-+ This must come before <config.h> because <config.h> may include
-+ <features.h>, and once <features.h> has been included, it's too late. */
-+#ifndef _GNU_SOURCE
-+# define _GNU_SOURCE 1
-+#endif
-+
-+#ifdef HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+#include <sys/types.h>
-+
-+#ifdef __GNUC__
-+# define alloca __builtin_alloca
-+# define HAVE_ALLOCA 1
-+#else
-+# ifdef _MSC_VER
-+# include <malloc.h>
-+# define alloca _alloca
-+# else
-+# if defined HAVE_ALLOCA_H || defined _LIBC
-+# include <alloca.h>
-+# else
-+# ifdef _AIX
-+ #pragma alloca
-+# else
-+# ifndef alloca
-+char *alloca ();
-+# endif
-+# endif
-+# endif
-+# endif
-+#endif
-+
-+#include <errno.h>
-+#ifndef errno
-+extern int errno;
-+#endif
-+#ifndef __set_errno
-+# define __set_errno(val) errno = (val)
-+#endif
-+
-+#include <stddef.h>
-+#include <stdlib.h>
-+#include <string.h>
-+
-+#if defined HAVE_UNISTD_H || defined _LIBC
-+# include <unistd.h>
-+#endif
-+
-+#include <locale.h>
-+
-+#ifdef _LIBC
-+ /* Guess whether integer division by zero raises signal SIGFPE.
-+ Set to 1 only if you know for sure. In case of doubt, set to 0. */
-+# if defined __alpha__ || defined __arm__ || defined __i386__ \
-+ || defined __m68k__ || defined __s390__
-+# define INTDIV0_RAISES_SIGFPE 1
-+# else
-+# define INTDIV0_RAISES_SIGFPE 0
-+# endif
-+#endif
-+#if !INTDIV0_RAISES_SIGFPE
-+# include <signal.h>
-+#endif
-+
-+#if defined HAVE_SYS_PARAM_H || defined _LIBC
-+# include <sys/param.h>
-+#endif
-+
-+#include "gettextP.h"
-+#include "plural-exp.h"
-+#ifdef _LIBC
-+# include <libintl.h>
-+#else
-+# include "libgnuintl.h"
-+#endif
-+#include "hash-string.h"
-+
-+/* Thread safetyness. */
-+#ifdef _LIBC
-+# include <bits/libc-lock.h>
-+#else
-+/* Provide dummy implementation if this is outside glibc. */
-+# define __libc_lock_define_initialized(CLASS, NAME)
-+# define __libc_lock_lock(NAME)
-+# define __libc_lock_unlock(NAME)
-+# define __libc_rwlock_define_initialized(CLASS, NAME)
-+# define __libc_rwlock_rdlock(NAME)
-+# define __libc_rwlock_unlock(NAME)
-+#endif
-+
-+/* Alignment of types. */
-+#if defined __GNUC__ && __GNUC__ >= 2
-+# define alignof(TYPE) __alignof__ (TYPE)
-+#else
-+# define alignof(TYPE) \
-+ ((int) &((struct { char dummy1; TYPE dummy2; } *) 0)->dummy2)
-+#endif
-+
-+/* The internal variables in the standalone libintl.a must have different
-+ names than the internal variables in GNU libc, otherwise programs
-+ using libintl.a cannot be linked statically. */
-+#if !defined _LIBC
-+# define _nl_default_default_domain libintl_nl_default_default_domain
-+# define _nl_current_default_domain libintl_nl_current_default_domain
-+# define _nl_default_dirname libintl_nl_default_dirname
-+# define _nl_domain_bindings libintl_nl_domain_bindings
-+#endif
-+
-+/* Some compilers, like SunOS4 cc, don't have offsetof in <stddef.h>. */
-+#ifndef offsetof
-+# define offsetof(type,ident) ((size_t)&(((type*)0)->ident))
-+#endif
-+
-+/* @@ end of prolog @@ */
-+
-+#ifdef _LIBC
-+/* Rename the non ANSI C functions. This is required by the standard
-+ because some ANSI C functions will require linking with this object
-+ file and the name space must not be polluted. */
-+# define getcwd __getcwd
-+# ifndef stpcpy
-+# define stpcpy __stpcpy
-+# endif
-+# define tfind __tfind
-+#else
-+# if !defined HAVE_GETCWD
-+char *getwd ();
-+# define getcwd(buf, max) getwd (buf)
-+# else
-+# if VMS
-+# define getcwd(buf, max) (getcwd) (buf, max, 0)
-+# else
-+char *getcwd ();
-+# endif
-+# endif
-+# ifndef HAVE_STPCPY
-+static char *stpcpy (char *dest, const char *src);
-+# endif
-+# ifndef HAVE_MEMPCPY
-+static void *mempcpy (void *dest, const void *src, size_t n);
-+# endif
-+#endif
-+
-+/* Amount to increase buffer size by in each try. */
-+#define PATH_INCR 32
-+
-+/* The following is from pathmax.h. */
-+/* Non-POSIX BSD systems might have gcc's limits.h, which doesn't define
-+ PATH_MAX but might cause redefinition warnings when sys/param.h is
-+ later included (as on MORE/BSD 4.3). */
-+#if defined _POSIX_VERSION || (defined HAVE_LIMITS_H && !defined __GNUC__)
-+# include <limits.h>
-+#endif
-+
-+#ifndef _POSIX_PATH_MAX
-+# define _POSIX_PATH_MAX 255
-+#endif
-+
-+#if !defined PATH_MAX && defined _PC_PATH_MAX
-+# define PATH_MAX (pathconf ("/", _PC_PATH_MAX) < 1 ? 1024 : pathconf ("/", _PC_PATH_MAX))
-+#endif
-+
-+/* Don't include sys/param.h if it already has been. */
-+#if defined HAVE_SYS_PARAM_H && !defined PATH_MAX && !defined MAXPATHLEN
-+# include <sys/param.h>
-+#endif
-+
-+#if !defined PATH_MAX && defined MAXPATHLEN
-+# define PATH_MAX MAXPATHLEN
-+#endif
-+
-+#ifndef PATH_MAX
-+# define PATH_MAX _POSIX_PATH_MAX
-+#endif
-+
-+/* Pathname support.
-+ ISSLASH(C) tests whether C is a directory separator character.
-+ IS_ABSOLUTE_PATH(P) tests whether P is an absolute path. If it is not,
-+ it may be concatenated to a directory pathname.
-+ IS_PATH_WITH_DIR(P) tests whether P contains a directory specification.
-+ */
-+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
-+ /* Win32, OS/2, DOS */
-+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
-+# define HAS_DEVICE(P) \
-+ ((((P)[0] >= 'A' && (P)[0] <= 'Z') || ((P)[0] >= 'a' && (P)[0] <= 'z')) \
-+ && (P)[1] == ':')
-+# define IS_ABSOLUTE_PATH(P) (ISSLASH ((P)[0]) || HAS_DEVICE (P))
-+# define IS_PATH_WITH_DIR(P) \
-+ (strchr (P, '/') != NULL || strchr (P, '\\') != NULL || HAS_DEVICE (P))
-+#else
-+ /* Unix */
-+# define ISSLASH(C) ((C) == '/')
-+# define IS_ABSOLUTE_PATH(P) ISSLASH ((P)[0])
-+# define IS_PATH_WITH_DIR(P) (strchr (P, '/') != NULL)
-+#endif
-+
-+/* This is the type used for the search tree where known translations
-+ are stored. */
-+struct known_translation_t
-+{
-+ /* Domain in which to search. */
-+ char *domainname;
-+
-+ /* The category. */
-+ int category;
-+
-+ /* State of the catalog counter at the point the string was found. */
-+ int counter;
-+
-+ /* Catalog where the string was found. */
-+ struct loaded_l10nfile *domain;
-+
-+ /* And finally the translation. */
-+ const char *translation;
-+ size_t translation_length;
-+
-+ /* Pointer to the string in question. */
-+ char msgid[ZERO];
-+};
-+
-+/* Root of the search tree with known translations. We can use this
-+ only if the system provides the `tsearch' function family. */
-+#if defined HAVE_TSEARCH || defined _LIBC
-+# include <search.h>
-+
-+static void *root;
-+
-+# ifdef _LIBC
-+# define tsearch __tsearch
-+# endif
-+
-+/* Function to compare two entries in the table of known translations. */
-+static int
-+transcmp (const void *p1, const void *p2)
-+{
-+ const struct known_translation_t *s1;
-+ const struct known_translation_t *s2;
-+ int result;
-+
-+ s1 = (const struct known_translation_t *) p1;
-+ s2 = (const struct known_translation_t *) p2;
-+
-+ result = strcmp (s1->msgid, s2->msgid);
-+ if (result == 0)
-+ {
-+ result = strcmp (s1->domainname, s2->domainname);
-+ if (result == 0)
-+ /* We compare the category last (though this is the cheapest
-+ operation) since it is hopefully always the same (namely
-+ LC_MESSAGES). */
-+ result = s1->category - s2->category;
-+ }
-+
-+ return result;
-+}
-+#endif
-+
-+#ifndef INTVARDEF
-+# define INTVARDEF(name)
-+#endif
-+#ifndef INTUSE
-+# define INTUSE(name) name
-+#endif
-+
-+/* Name of the default domain used for gettext(3) prior any call to
-+ textdomain(3). The default value for this is "messages". */
-+const char _nl_default_default_domain[] attribute_hidden = "messages";
-+
-+/* Value used as the default domain for gettext(3). */
-+const char *_nl_current_default_domain attribute_hidden
-+ = _nl_default_default_domain;
-+
-+/* Contains the default location of the message catalogs. */
-+#if defined __EMX__
-+extern const char _nl_default_dirname[];
-+#else
-+const char _nl_default_dirname[] = LOCALEDIR;
-+INTVARDEF (_nl_default_dirname)
-+#endif
-+
-+/* List with bindings of specific domains created by bindtextdomain()
-+ calls. */
-+struct binding *_nl_domain_bindings;
-+
-+/* Prototypes for local functions. */
-+static char *plural_lookup (struct loaded_l10nfile *domain,
-+ unsigned long int n,
-+ const char *translation, size_t translation_len)
-+ internal_function;
-+static const char *guess_category_value (int category,
-+ const char *categoryname)
-+ internal_function;
-+#ifdef _LIBC
-+# include "../locale/localeinfo.h"
-+# define category_to_name(category) _nl_category_names[category]
-+#else
-+static const char *category_to_name (int category) internal_function;
-+#endif
-+
-+
-+/* For those loosing systems which don't have `alloca' we have to add
-+ some additional code emulating it. */
-+#ifdef HAVE_ALLOCA
-+/* Nothing has to be done. */
-+# define freea(p) /* nothing */
-+# define ADD_BLOCK(list, address) /* nothing */
-+# define FREE_BLOCKS(list) /* nothing */
-+#else
-+struct block_list
-+{
-+ void *address;
-+ struct block_list *next;
-+};
-+# define ADD_BLOCK(list, addr) \
-+ do { \
-+ struct block_list *newp = (struct block_list *) malloc (sizeof (*newp)); \
-+ /* If we cannot get a free block we cannot add the new element to \
-+ the list. */ \
-+ if (newp != NULL) { \
-+ newp->address = (addr); \
-+ newp->next = (list); \
-+ (list) = newp; \
-+ } \
-+ } while (0)
-+# define FREE_BLOCKS(list) \
-+ do { \
-+ while (list != NULL) { \
-+ struct block_list *old = list; \
-+ list = list->next; \
-+ free (old->address); \
-+ free (old); \
-+ } \
-+ } while (0)
-+# undef alloca
-+# define alloca(size) (malloc (size))
-+# define freea(p) free (p)
-+#endif /* have alloca */
-+
-+
-+#ifdef _LIBC
-+/* List of blocks allocated for translations. */
-+typedef struct transmem_list
-+{
-+ struct transmem_list *next;
-+ char data[ZERO];
-+} transmem_block_t;
-+static struct transmem_list *transmem_list;
-+#else
-+typedef unsigned char transmem_block_t;
-+#endif
-+
-+
-+/* Names for the libintl functions are a problem. They must not clash
-+ with existing names and they should follow ANSI C. But this source
-+ code is also used in GNU C Library where the names have a __
-+ prefix. So we have to make a difference here. */
-+#ifdef _LIBC
-+# define DCIGETTEXT __dcigettext
-+#else
-+# define DCIGETTEXT libintl_dcigettext
-+#endif
-+
-+/* Lock variable to protect the global data in the gettext implementation. */
-+#ifdef _LIBC
-+__libc_rwlock_define_initialized (, _nl_state_lock attribute_hidden)
-+#endif
-+
-+/* Checking whether the binaries runs SUID must be done and glibc provides
-+ easier methods therefore we make a difference here. */
-+#ifdef _LIBC
-+# define ENABLE_SECURE __libc_enable_secure
-+# define DETERMINE_SECURE
-+#else
-+# ifndef HAVE_GETUID
-+# define getuid() 0
-+# endif
-+# ifndef HAVE_GETGID
-+# define getgid() 0
-+# endif
-+# ifndef HAVE_GETEUID
-+# define geteuid() getuid()
-+# endif
-+# ifndef HAVE_GETEGID
-+# define getegid() getgid()
-+# endif
-+static int enable_secure;
-+# define ENABLE_SECURE (enable_secure == 1)
-+# define DETERMINE_SECURE \
-+ if (enable_secure == 0) \
-+ { \
-+ if (getuid () != geteuid () || getgid () != getegid ()) \
-+ enable_secure = 1; \
-+ else \
-+ enable_secure = -1; \
-+ }
-+#endif
-+
-+/* Get the function to evaluate the plural expression. */
-+#include "eval-plural.h"
-+
-+/* Look up MSGID in the DOMAINNAME message catalog for the current
-+ CATEGORY locale and, if PLURAL is nonzero, search over string
-+ depending on the plural form determined by N. */
-+char *
-+DCIGETTEXT (const char *domainname, const char *msgid1, const char *msgid2,
-+ int plural, unsigned long int n, int category)
-+{
-+#ifndef HAVE_ALLOCA
-+ struct block_list *block_list = NULL;
-+#endif
-+ struct loaded_l10nfile *domain;
-+ struct binding *binding;
-+ const char *categoryname;
-+ const char *categoryvalue;
-+ char *dirname, *xdomainname;
-+ char *single_locale;
-+ char *retval;
-+ size_t retlen;
-+ int saved_errno;
-+#if defined HAVE_TSEARCH || defined _LIBC
-+ struct known_translation_t *search;
-+ struct known_translation_t **foundp = NULL;
-+ size_t msgid_len;
-+#endif
-+ size_t domainname_len;
-+
-+ /* If no real MSGID is given return NULL. */
-+ if (msgid1 == NULL)
-+ return NULL;
-+
-+#ifdef _LIBC
-+ if (category < 0 || category >= __LC_LAST || category == LC_ALL)
-+ /* Bogus. */
-+ return (plural == 0
-+ ? (char *) msgid1
-+ /* Use the Germanic plural rule. */
-+ : n == 1 ? (char *) msgid1 : (char *) msgid2);
-+#endif
-+
-+ __libc_rwlock_rdlock (_nl_state_lock);
-+
-+ /* If DOMAINNAME is NULL, we are interested in the default domain. If
-+ CATEGORY is not LC_MESSAGES this might not make much sense but the
-+ definition left this undefined. */
-+ if (domainname == NULL)
-+ domainname = _nl_current_default_domain;
-+
-+ /* OS/2 specific: backward compatibility with older libintl versions */
-+#ifdef LC_MESSAGES_COMPAT
-+ if (category == LC_MESSAGES_COMPAT)
-+ category = LC_MESSAGES;
-+#endif
-+
-+#if defined HAVE_TSEARCH || defined _LIBC
-+ msgid_len = strlen (msgid1) + 1;
-+
-+ /* Try to find the translation among those which we found at
-+ some time. */
-+ search = (struct known_translation_t *)
-+ alloca (offsetof (struct known_translation_t, msgid) + msgid_len);
-+ memcpy (search->msgid, msgid1, msgid_len);
-+ search->domainname = (char *) domainname;
-+ search->category = category;
-+
-+ foundp = (struct known_translation_t **) tfind (search, &root, transcmp);
-+ freea (search);
-+ if (foundp != NULL && (*foundp)->counter == _nl_msg_cat_cntr)
-+ {
-+ /* Now deal with plural. */
-+ if (plural)
-+ retval = plural_lookup ((*foundp)->domain, n, (*foundp)->translation,
-+ (*foundp)->translation_length);
-+ else
-+ retval = (char *) (*foundp)->translation;
-+
-+ __libc_rwlock_unlock (_nl_state_lock);
-+ return retval;
-+ }
-+#endif
-+
-+ /* Preserve the `errno' value. */
-+ saved_errno = errno;
-+
-+ /* See whether this is a SUID binary or not. */
-+ DETERMINE_SECURE;
-+
-+ /* First find matching binding. */
-+ for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
-+ {
-+ int compare = strcmp (domainname, binding->domainname);
-+ if (compare == 0)
-+ /* We found it! */
-+ break;
-+ if (compare < 0)
-+ {
-+ /* It is not in the list. */
-+ binding = NULL;
-+ break;
-+ }
-+ }
-+
-+ if (binding == NULL)
-+ dirname = (char *) INTUSE(_nl_default_dirname);
-+ else if (IS_ABSOLUTE_PATH (binding->dirname))
-+ dirname = binding->dirname;
-+ else
-+ {
-+ /* We have a relative path. Make it absolute now. */
-+ size_t dirname_len = strlen (binding->dirname) + 1;
-+ size_t path_max;
-+ char *ret;
-+
-+ path_max = (unsigned int) PATH_MAX;
-+ path_max += 2; /* The getcwd docs say to do this. */
-+
-+ for (;;)
-+ {
-+ dirname = (char *) alloca (path_max + dirname_len);
-+ ADD_BLOCK (block_list, dirname);
-+
-+ __set_errno (0);
-+ ret = getcwd (dirname, path_max);
-+ if (ret != NULL || errno != ERANGE)
-+ break;
-+
-+ path_max += path_max / 2;
-+ path_max += PATH_INCR;
-+ }
-+
-+ if (ret == NULL)
-+ /* We cannot get the current working directory. Don't signal an
-+ error but simply return the default string. */
-+ goto return_untranslated;
-+
-+ stpcpy (stpcpy (strchr (dirname, '\0'), "/"), binding->dirname);
-+ }
-+
-+ /* Now determine the symbolic name of CATEGORY and its value. */
-+ categoryname = category_to_name (category);
-+ categoryvalue = guess_category_value (category, categoryname);
-+
-+ domainname_len = strlen (domainname);
-+ xdomainname = (char *) alloca (strlen (categoryname)
-+ + domainname_len + 5);
-+ ADD_BLOCK (block_list, xdomainname);
-+
-+ stpcpy (mempcpy (stpcpy (stpcpy (xdomainname, categoryname), "/"),
-+ domainname, domainname_len),
-+ ".mo");
-+
-+ /* Creating working area. */
-+ single_locale = (char *) alloca (strlen (categoryvalue) + 1);
-+ ADD_BLOCK (block_list, single_locale);
-+
-+
-+ /* Search for the given string. This is a loop because we perhaps
-+ got an ordered list of languages to consider for the translation. */
-+ while (1)
-+ {
-+ /* Make CATEGORYVALUE point to the next element of the list. */
-+ while (categoryvalue[0] != '\0' && categoryvalue[0] == ':')
-+ ++categoryvalue;
-+ if (categoryvalue[0] == '\0')
-+ {
-+ /* The whole contents of CATEGORYVALUE has been searched but
-+ no valid entry has been found. We solve this situation
-+ by implicitly appending a "C" entry, i.e. no translation
-+ will take place. */
-+ single_locale[0] = 'C';
-+ single_locale[1] = '\0';
-+ }
-+ else
-+ {
-+ char *cp = single_locale;
-+ while (categoryvalue[0] != '\0' && categoryvalue[0] != ':')
-+ *cp++ = *categoryvalue++;
-+ *cp = '\0';
-+
-+ /* When this is a SUID binary we must not allow accessing files
-+ outside the dedicated directories. */
-+ if (ENABLE_SECURE && IS_PATH_WITH_DIR (single_locale))
-+ /* Ingore this entry. */
-+ continue;
-+ }
-+
-+ /* If the current locale value is C (or POSIX) we don't load a
-+ domain. Return the MSGID. */
-+ if (strcmp (single_locale, "C") == 0
-+ || strcmp (single_locale, "POSIX") == 0)
-+ break;
-+
-+ /* Find structure describing the message catalog matching the
-+ DOMAINNAME and CATEGORY. */
-+ domain = _nl_find_domain (dirname, single_locale, xdomainname, binding);
-+
-+ if (domain != NULL)
-+ {
-+ retval = _nl_find_msg (domain, binding, msgid1, &retlen);
-+
-+ if (retval == NULL)
-+ {
-+ int cnt;
-+
-+ for (cnt = 0; domain->successor[cnt] != NULL; ++cnt)
-+ {
-+ retval = _nl_find_msg (domain->successor[cnt], binding,
-+ msgid1, &retlen);
-+
-+ if (retval != NULL)
-+ {
-+ domain = domain->successor[cnt];
-+ break;
-+ }
-+ }
-+ }
-+
-+ if (retval != NULL)
-+ {
-+ /* Found the translation of MSGID1 in domain DOMAIN:
-+ starting at RETVAL, RETLEN bytes. */
-+ FREE_BLOCKS (block_list);
-+#if defined HAVE_TSEARCH || defined _LIBC
-+ if (foundp == NULL)
-+ {
-+ /* Create a new entry and add it to the search tree. */
-+ struct known_translation_t *newp;
-+
-+ newp = (struct known_translation_t *)
-+ malloc (offsetof (struct known_translation_t, msgid)
-+ + msgid_len + domainname_len + 1);
-+ if (newp != NULL)
-+ {
-+ newp->domainname =
-+ mempcpy (newp->msgid, msgid1, msgid_len);
-+ memcpy (newp->domainname, domainname, domainname_len + 1);
-+ newp->category = category;
-+ newp->counter = _nl_msg_cat_cntr;
-+ newp->domain = domain;
-+ newp->translation = retval;
-+ newp->translation_length = retlen;
-+
-+ /* Insert the entry in the search tree. */
-+ foundp = (struct known_translation_t **)
-+ tsearch (newp, &root, transcmp);
-+ if (foundp == NULL
-+ || __builtin_expect (*foundp != newp, 0))
-+ /* The insert failed. */
-+ free (newp);
-+ }
-+ }
-+ else
-+ {
-+ /* We can update the existing entry. */
-+ (*foundp)->counter = _nl_msg_cat_cntr;
-+ (*foundp)->domain = domain;
-+ (*foundp)->translation = retval;
-+ (*foundp)->translation_length = retlen;
-+ }
-+#endif
-+ __set_errno (saved_errno);
-+
-+ /* Now deal with plural. */
-+ if (plural)
-+ retval = plural_lookup (domain, n, retval, retlen);
-+
-+ __libc_rwlock_unlock (_nl_state_lock);
-+ return retval;
-+ }
-+ }
-+ }
-+
-+ return_untranslated:
-+ /* Return the untranslated MSGID. */
-+ FREE_BLOCKS (block_list);
-+ __libc_rwlock_unlock (_nl_state_lock);
-+#ifndef _LIBC
-+ if (!ENABLE_SECURE)
-+ {
-+ extern void _nl_log_untranslated (const char *logfilename,
-+ const char *domainname,
-+ const char *msgid1, const char *msgid2,
-+ int plural);
-+ const char *logfilename = getenv ("GETTEXT_LOG_UNTRANSLATED");
-+
-+ if (logfilename != NULL && logfilename[0] != '\0')
-+ _nl_log_untranslated (logfilename, domainname, msgid1, msgid2, plural);
-+ }
-+#endif
-+ __set_errno (saved_errno);
-+ return (plural == 0
-+ ? (char *) msgid1
-+ /* Use the Germanic plural rule. */
-+ : n == 1 ? (char *) msgid1 : (char *) msgid2);
-+}
-+
-+
-+char *
-+internal_function
-+_nl_find_msg (struct loaded_l10nfile *domain_file,
-+ struct binding *domainbinding, const char *msgid,
-+ size_t *lengthp)
-+{
-+ struct loaded_domain *domain;
-+ nls_uint32 nstrings;
-+ size_t act;
-+ char *result;
-+ size_t resultlen;
-+
-+ if (domain_file->decided == 0)
-+ _nl_load_domain (domain_file, domainbinding);
-+
-+ if (domain_file->data == NULL)
-+ return NULL;
-+
-+ domain = (struct loaded_domain *) domain_file->data;
-+
-+ nstrings = domain->nstrings;
-+
-+ /* Locate the MSGID and its translation. */
-+ if (domain->hash_tab != NULL)
-+ {
-+ /* Use the hashing table. */
-+ nls_uint32 len = strlen (msgid);
-+ nls_uint32 hash_val = hash_string (msgid);
-+ nls_uint32 idx = hash_val % domain->hash_size;
-+ nls_uint32 incr = 1 + (hash_val % (domain->hash_size - 2));
-+
-+ while (1)
-+ {
-+ nls_uint32 nstr =
-+ W (domain->must_swap_hash_tab, domain->hash_tab[idx]);
-+
-+ if (nstr == 0)
-+ /* Hash table entry is empty. */
-+ return NULL;
-+
-+ nstr--;
-+
-+ /* Compare msgid with the original string at index nstr.
-+ We compare the lengths with >=, not ==, because plural entries
-+ are represented by strings with an embedded NUL. */
-+ if (nstr < nstrings
-+ ? W (domain->must_swap, domain->orig_tab[nstr].length) >= len
-+ && (strcmp (msgid,
-+ domain->data + W (domain->must_swap,
-+ domain->orig_tab[nstr].offset))
-+ == 0)
-+ : domain->orig_sysdep_tab[nstr - nstrings].length > len
-+ && (strcmp (msgid,
-+ domain->orig_sysdep_tab[nstr - nstrings].pointer)
-+ == 0))
-+ {
-+ act = nstr;
-+ goto found;
-+ }
-+
-+ if (idx >= domain->hash_size - incr)
-+ idx -= domain->hash_size - incr;
-+ else
-+ idx += incr;
-+ }
-+ /* NOTREACHED */
-+ }
-+ else
-+ {
-+ /* Try the default method: binary search in the sorted array of
-+ messages. */
-+ size_t top, bottom;
-+
-+ bottom = 0;
-+ top = nstrings;
-+ while (bottom < top)
-+ {
-+ int cmp_val;
-+
-+ act = (bottom + top) / 2;
-+ cmp_val = strcmp (msgid, (domain->data
-+ + W (domain->must_swap,
-+ domain->orig_tab[act].offset)));
-+ if (cmp_val < 0)
-+ top = act;
-+ else if (cmp_val > 0)
-+ bottom = act + 1;
-+ else
-+ goto found;
-+ }
-+ /* No translation was found. */
-+ return NULL;
-+ }
-+
-+ found:
-+ /* The translation was found at index ACT. If we have to convert the
-+ string to use a different character set, this is the time. */
-+ if (act < nstrings)
-+ {
-+ result = (char *)
-+ (domain->data + W (domain->must_swap, domain->trans_tab[act].offset));
-+ resultlen = W (domain->must_swap, domain->trans_tab[act].length) + 1;
-+ }
-+ else
-+ {
-+ result = (char *) domain->trans_sysdep_tab[act - nstrings].pointer;
-+ resultlen = domain->trans_sysdep_tab[act - nstrings].length;
-+ }
-+
-+#if defined _LIBC || HAVE_ICONV
-+ if (domain->codeset_cntr
-+ != (domainbinding != NULL ? domainbinding->codeset_cntr : 0))
-+ {
-+ /* The domain's codeset has changed through bind_textdomain_codeset()
-+ since the message catalog was initialized or last accessed. We
-+ have to reinitialize the converter. */
-+ _nl_free_domain_conv (domain);
-+ _nl_init_domain_conv (domain_file, domain, domainbinding);
-+ }
-+
-+ if (
-+# ifdef _LIBC
-+ domain->conv != (__gconv_t) -1
-+# else
-+# if HAVE_ICONV
-+ domain->conv != (iconv_t) -1
-+# endif
-+# endif
-+ )
-+ {
-+ /* We are supposed to do a conversion. First allocate an
-+ appropriate table with the same structure as the table
-+ of translations in the file, where we can put the pointers
-+ to the converted strings in.
-+ There is a slight complication with plural entries. They
-+ are represented by consecutive NUL terminated strings. We
-+ handle this case by converting RESULTLEN bytes, including
-+ NULs. */
-+
-+ if (domain->conv_tab == NULL
-+ && ((domain->conv_tab =
-+ (char **) calloc (nstrings + domain->n_sysdep_strings,
-+ sizeof (char *)))
-+ == NULL))
-+ /* Mark that we didn't succeed allocating a table. */
-+ domain->conv_tab = (char **) -1;
-+
-+ if (__builtin_expect (domain->conv_tab == (char **) -1, 0))
-+ /* Nothing we can do, no more memory. */
-+ goto converted;
-+
-+ if (domain->conv_tab[act] == NULL)
-+ {
-+ /* We haven't used this string so far, so it is not
-+ translated yet. Do this now. */
-+ /* We use a bit more efficient memory handling.
-+ We allocate always larger blocks which get used over
-+ time. This is faster than many small allocations. */
-+ __libc_lock_define_initialized (static, lock)
-+# define INITIAL_BLOCK_SIZE 4080
-+ static unsigned char *freemem;
-+ static size_t freemem_size;
-+
-+ const unsigned char *inbuf;
-+ unsigned char *outbuf;
-+ int malloc_count;
-+# ifndef _LIBC
-+ transmem_block_t *transmem_list = NULL;
-+# endif
-+
-+ __libc_lock_lock (lock);
-+
-+ inbuf = (const unsigned char *) result;
-+ outbuf = freemem + sizeof (size_t);
-+
-+ malloc_count = 0;
-+ while (1)
-+ {
-+ transmem_block_t *newmem;
-+# ifdef _LIBC
-+ size_t non_reversible;
-+ int res;
-+
-+ if (freemem_size < sizeof (size_t))
-+ goto resize_freemem;
-+
-+ res = __gconv (domain->conv,
-+ &inbuf, inbuf + resultlen,
-+ &outbuf,
-+ outbuf + freemem_size - sizeof (size_t),
-+ &non_reversible);
-+
-+ if (res == __GCONV_OK || res == __GCONV_EMPTY_INPUT)
-+ break;
-+
-+ if (res != __GCONV_FULL_OUTPUT)
-+ {
-+ __libc_lock_unlock (lock);
-+ goto converted;
-+ }
-+
-+ inbuf = result;
-+# else
-+# if HAVE_ICONV
-+ const char *inptr = (const char *) inbuf;
-+ size_t inleft = resultlen;
-+ char *outptr = (char *) outbuf;
-+ size_t outleft;
-+
-+ if (freemem_size < sizeof (size_t))
-+ goto resize_freemem;
-+
-+ outleft = freemem_size - sizeof (size_t);
-+ if (iconv (domain->conv,
-+ (ICONV_CONST char **) &inptr, &inleft,
-+ &outptr, &outleft)
-+ != (size_t) (-1))
-+ {
-+ outbuf = (unsigned char *) outptr;
-+ break;
-+ }
-+ if (errno != E2BIG)
-+ {
-+ __libc_lock_unlock (lock);
-+ goto converted;
-+ }
-+# endif
-+# endif
-+
-+ resize_freemem:
-+ /* We must allocate a new buffer or resize the old one. */
-+ if (malloc_count > 0)
-+ {
-+ ++malloc_count;
-+ freemem_size = malloc_count * INITIAL_BLOCK_SIZE;
-+ newmem = (transmem_block_t *) realloc (transmem_list,
-+ freemem_size);
-+# ifdef _LIBC
-+ if (newmem != NULL)
-+ transmem_list = transmem_list->next;
-+ else
-+ {
-+ struct transmem_list *old = transmem_list;
-+
-+ transmem_list = transmem_list->next;
-+ free (old);
-+ }
-+# endif
-+ }
-+ else
-+ {
-+ malloc_count = 1;
-+ freemem_size = INITIAL_BLOCK_SIZE;
-+ newmem = (transmem_block_t *) malloc (freemem_size);
-+ }
-+ if (__builtin_expect (newmem == NULL, 0))
-+ {
-+ freemem = NULL;
-+ freemem_size = 0;
-+ __libc_lock_unlock (lock);
-+ goto converted;
-+ }
-+
-+# ifdef _LIBC
-+ /* Add the block to the list of blocks we have to free
-+ at some point. */
-+ newmem->next = transmem_list;
-+ transmem_list = newmem;
-+
-+ freemem = newmem->data;
-+ freemem_size -= offsetof (struct transmem_list, data);
-+# else
-+ transmem_list = newmem;
-+ freemem = newmem;
-+# endif
-+
-+ outbuf = freemem + sizeof (size_t);
-+ }
-+
-+ /* We have now in our buffer a converted string. Put this
-+ into the table of conversions. */
-+ *(size_t *) freemem = outbuf - freemem - sizeof (size_t);
-+ domain->conv_tab[act] = (char *) freemem;
-+ /* Shrink freemem, but keep it aligned. */
-+ freemem_size -= outbuf - freemem;
-+ freemem = outbuf;
-+ freemem += freemem_size & (alignof (size_t) - 1);
-+ freemem_size = freemem_size & ~ (alignof (size_t) - 1);
-+
-+ __libc_lock_unlock (lock);
-+ }
-+
-+ /* Now domain->conv_tab[act] contains the translation of all
-+ the plural variants. */
-+ result = domain->conv_tab[act] + sizeof (size_t);
-+ resultlen = *(size_t *) domain->conv_tab[act];
-+ }
-+
-+ converted:
-+ /* The result string is converted. */
-+
-+#endif /* _LIBC || HAVE_ICONV */
-+
-+ *lengthp = resultlen;
-+ return result;
-+}
-+
-+
-+/* Look up a plural variant. */
-+static char *
-+internal_function
-+plural_lookup (struct loaded_l10nfile *domain, unsigned long int n,
-+ const char *translation, size_t translation_len)
-+{
-+ struct loaded_domain *domaindata = (struct loaded_domain *) domain->data;
-+ unsigned long int index;
-+ const char *p;
-+
-+ index = plural_eval (domaindata->plural, n);
-+ if (index >= domaindata->nplurals)
-+ /* This should never happen. It means the plural expression and the
-+ given maximum value do not match. */
-+ index = 0;
-+
-+ /* Skip INDEX strings at TRANSLATION. */
-+ p = translation;
-+ while (index-- > 0)
-+ {
-+#ifdef _LIBC
-+ p = __rawmemchr (p, '\0');
-+#else
-+ p = strchr (p, '\0');
-+#endif
-+ /* And skip over the NUL byte. */
-+ p++;
-+
-+ if (p >= translation + translation_len)
-+ /* This should never happen. It means the plural expression
-+ evaluated to a value larger than the number of variants
-+ available for MSGID1. */
-+ return (char *) translation;
-+ }
-+ return (char *) p;
-+}
-+
-+#ifndef _LIBC
-+/* Return string representation of locale CATEGORY. */
-+static const char *
-+internal_function
-+category_to_name (int category)
-+{
-+ const char *retval;
-+
-+ switch (category)
-+ {
-+#ifdef LC_COLLATE
-+ case LC_COLLATE:
-+ retval = "LC_COLLATE";
-+ break;
-+#endif
-+#ifdef LC_CTYPE
-+ case LC_CTYPE:
-+ retval = "LC_CTYPE";
-+ break;
-+#endif
-+#ifdef LC_MONETARY
-+ case LC_MONETARY:
-+ retval = "LC_MONETARY";
-+ break;
-+#endif
-+#ifdef LC_NUMERIC
-+ case LC_NUMERIC:
-+ retval = "LC_NUMERIC";
-+ break;
-+#endif
-+#ifdef LC_TIME
-+ case LC_TIME:
-+ retval = "LC_TIME";
-+ break;
-+#endif
-+#ifdef LC_MESSAGES
-+ case LC_MESSAGES:
-+ retval = "LC_MESSAGES";
-+ break;
-+#endif
-+#ifdef LC_RESPONSE
-+ case LC_RESPONSE:
-+ retval = "LC_RESPONSE";
-+ break;
-+#endif
-+#ifdef LC_ALL
-+ case LC_ALL:
-+ /* This might not make sense but is perhaps better than any other
-+ value. */
-+ retval = "LC_ALL";
-+ break;
-+#endif
-+ default:
-+ /* If you have a better idea for a default value let me know. */
-+ retval = "LC_XXX";
-+ }
-+
-+ return retval;
-+}
-+#endif
-+
-+/* Guess value of current locale from value of the environment variables. */
-+static const char *
-+internal_function
-+guess_category_value (int category, const char *categoryname)
-+{
-+ const char *language;
-+ const char *retval;
-+
-+ /* The highest priority value is the `LANGUAGE' environment
-+ variable. But we don't use the value if the currently selected
-+ locale is the C locale. This is a GNU extension. */
-+ language = getenv ("LANGUAGE");
-+ if (language != NULL && language[0] == '\0')
-+ language = NULL;
-+
-+ /* We have to proceed with the POSIX methods of looking to `LC_ALL',
-+ `LC_xxx', and `LANG'. On some systems this can be done by the
-+ `setlocale' function itself. */
-+#ifdef _LIBC
-+ retval = __current_locale_name (category);
-+#else
-+ retval = _nl_locale_name (category, categoryname);
-+#endif
-+
-+ /* Ignore LANGUAGE if the locale is set to "C" because
-+ 1. "C" locale usually uses the ASCII encoding, and most international
-+ messages use non-ASCII characters. These characters get displayed
-+ as question marks (if using glibc's iconv()) or as invalid 8-bit
-+ characters (because other iconv()s refuse to convert most non-ASCII
-+ characters to ASCII). In any case, the output is ugly.
-+ 2. The precise output of some programs in the "C" locale is specified
-+ by POSIX and should not depend on environment variables like
-+ "LANGUAGE". We allow such programs to use gettext(). */
-+ return language != NULL && strcmp (retval, "C") != 0 ? language : retval;
-+}
-+
-+/* @@ begin of epilog @@ */
-+
-+/* We don't want libintl.a to depend on any other library. So we
-+ avoid the non-standard function stpcpy. In GNU C Library this
-+ function is available, though. Also allow the symbol HAVE_STPCPY
-+ to be defined. */
-+#if !_LIBC && !HAVE_STPCPY
-+static char *
-+stpcpy (char *dest, const char *src)
-+{
-+ while ((*dest++ = *src++) != '\0')
-+ /* Do nothing. */ ;
-+ return dest - 1;
-+}
-+#endif
-+
-+#if !_LIBC && !HAVE_MEMPCPY
-+static void *
-+mempcpy (void *dest, const void *src, size_t n)
-+{
-+ return (void *) ((char *) memcpy (dest, src, n) + n);
-+}
-+#endif
-+
-+
-+#ifdef _LIBC
-+/* If we want to free all resources we have to do some work at
-+ program's end. */
-+libc_freeres_fn (free_mem)
-+{
-+ void *old;
-+
-+ while (_nl_domain_bindings != NULL)
-+ {
-+ struct binding *oldp = _nl_domain_bindings;
-+ _nl_domain_bindings = _nl_domain_bindings->next;
-+ if (oldp->dirname != INTUSE(_nl_default_dirname))
-+ /* Yes, this is a pointer comparison. */
-+ free (oldp->dirname);
-+ free (oldp->codeset);
-+ free (oldp);
-+ }
-+
-+ if (_nl_current_default_domain != _nl_default_default_domain)
-+ /* Yes, again a pointer comparison. */
-+ free ((char *) _nl_current_default_domain);
-+
-+ /* Remove the search tree with the known translations. */
-+ __tdestroy (root, free);
-+ root = NULL;
-+
-+ while (transmem_list != NULL)
-+ {
-+ old = transmem_list;
-+ transmem_list = transmem_list->next;
-+ free (old);
-+ }
-+}
-+#endif
---- lrzsz-0.12.20.safe/intl/dcngettext.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/dcngettext.c 2004-09-12 14:40:34.375745048 -0400
-@@ -0,0 +1,57 @@
-+/* Implementation of the dcngettext(3) function.
-+ Copyright (C) 1995-1999, 2000-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifdef HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+#include "gettextP.h"
-+#ifdef _LIBC
-+# include <libintl.h>
-+#else
-+# include "libgnuintl.h"
-+#endif
-+
-+/* @@ end of prolog @@ */
-+
-+/* Names for the libintl functions are a problem. They must not clash
-+ with existing names and they should follow ANSI C. But this source
-+ code is also used in GNU C Library where the names have a __
-+ prefix. So we have to make a difference here. */
-+#ifdef _LIBC
-+# define DCNGETTEXT __dcngettext
-+# define DCIGETTEXT __dcigettext
-+#else
-+# define DCNGETTEXT libintl_dcngettext
-+# define DCIGETTEXT libintl_dcigettext
-+#endif
-+
-+/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
-+ locale. */
-+char *
-+DCNGETTEXT (const char *domainname,
-+ const char *msgid1, const char *msgid2, unsigned long int n,
-+ int category)
-+{
-+ return DCIGETTEXT (domainname, msgid1, msgid2, 1, n, category);
-+}
-+
-+#ifdef _LIBC
-+/* Alias for function name in GNU C Library. */
-+weak_alias (__dcngettext, dcngettext);
-+#endif
---- lrzsz-0.12.20.safe/intl/dgettext.c 1998-04-26 09:20:52.000000000 -0400
-+++ lrzsz-0.12.20/intl/dgettext.c 2004-09-12 14:40:34.380744288 -0400
-@@ -1,32 +1,33 @@
--/* dgettext.c -- implementation of the dgettext(3) function
-- Copyright (C) 1995 Software Foundation, Inc.
-+/* Implementation of the dgettext(3) function.
-+ Copyright (C) 1995-1997, 2000-2003 Free Software Foundation, Inc.
-
--This program is free software; you can redistribute it and/or modify
--it under the terms of the GNU General Public License as published by
--the Free Software Foundation; either version 2, or (at your option)
--any later version.
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-
--This program is distributed in the hope that it will be useful,
--but WITHOUT ANY WARRANTY; without even the implied warranty of
--MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--GNU General Public License for more details.
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-
--You should have received a copy of the GNU General Public License
--along with this program; if not, write to the Free Software
--Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-
- #ifdef HAVE_CONFIG_H
- # include <config.h>
- #endif
-
--#if defined HAVE_LOCALE_H || defined _LIBC
--# include <locale.h>
--#endif
-+#include "gettextP.h"
-+
-+#include <locale.h>
-
- #ifdef _LIBC
- # include <libintl.h>
- #else
--# include "libgettext.h"
-+# include "libgnuintl.h"
- #endif
-
- /* @@ end of prolog @@ */
-@@ -37,18 +38,16 @@
- prefix. So we have to make a difference here. */
- #ifdef _LIBC
- # define DGETTEXT __dgettext
--# define DCGETTEXT __dcgettext
-+# define DCGETTEXT INTUSE(__dcgettext)
- #else
--# define DGETTEXT dgettext__
--# define DCGETTEXT dcgettext__
-+# define DGETTEXT libintl_dgettext
-+# define DCGETTEXT libintl_dcgettext
- #endif
-
- /* Look up MSGID in the DOMAINNAME message catalog of the current
- LC_MESSAGES locale. */
- char *
--DGETTEXT (domainname, msgid)
-- const char *domainname;
-- const char *msgid;
-+DGETTEXT (const char *domainname, const char *msgid)
- {
- return DCGETTEXT (domainname, msgid, LC_MESSAGES);
- }
---- lrzsz-0.12.20.safe/intl/dngettext.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/dngettext.c 2004-09-12 14:40:34.385743528 -0400
-@@ -0,0 +1,59 @@
-+/* Implementation of the dngettext(3) function.
-+ Copyright (C) 1995-1997, 2000-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifdef HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+#include "gettextP.h"
-+
-+#include <locale.h>
-+
-+#ifdef _LIBC
-+# include <libintl.h>
-+#else
-+# include "libgnuintl.h"
-+#endif
-+
-+/* @@ end of prolog @@ */
-+
-+/* Names for the libintl functions are a problem. They must not clash
-+ with existing names and they should follow ANSI C. But this source
-+ code is also used in GNU C Library where the names have a __
-+ prefix. So we have to make a difference here. */
-+#ifdef _LIBC
-+# define DNGETTEXT __dngettext
-+# define DCNGETTEXT __dcngettext
-+#else
-+# define DNGETTEXT libintl_dngettext
-+# define DCNGETTEXT libintl_dcngettext
-+#endif
-+
-+/* Look up MSGID in the DOMAINNAME message catalog of the current
-+ LC_MESSAGES locale and skip message according to the plural form. */
-+char *
-+DNGETTEXT (const char *domainname,
-+ const char *msgid1, const char *msgid2, unsigned long int n)
-+{
-+ return DCNGETTEXT (domainname, msgid1, msgid2, n, LC_MESSAGES);
-+}
-+
-+#ifdef _LIBC
-+/* Alias for function name in GNU C Library. */
-+weak_alias (__dngettext, dngettext);
-+#endif
---- lrzsz-0.12.20.safe/intl/eval-plural.h 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/eval-plural.h 2004-09-12 14:40:34.390742768 -0400
-@@ -0,0 +1,108 @@
-+/* Plural expression evaluation.
-+ Copyright (C) 2000-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifndef STATIC
-+#define STATIC static
-+#endif
-+
-+/* Evaluate the plural expression and return an index value. */
-+STATIC
-+unsigned long int
-+internal_function
-+plural_eval (struct expression *pexp, unsigned long int n)
-+{
-+ switch (pexp->nargs)
-+ {
-+ case 0:
-+ switch (pexp->operation)
-+ {
-+ case var:
-+ return n;
-+ case num:
-+ return pexp->val.num;
-+ default:
-+ break;
-+ }
-+ /* NOTREACHED */
-+ break;
-+ case 1:
-+ {
-+ /* pexp->operation must be lnot. */
-+ unsigned long int arg = plural_eval (pexp->val.args[0], n);
-+ return ! arg;
-+ }
-+ case 2:
-+ {
-+ unsigned long int leftarg = plural_eval (pexp->val.args[0], n);
-+ if (pexp->operation == lor)
-+ return leftarg || plural_eval (pexp->val.args[1], n);
-+ else if (pexp->operation == land)
-+ return leftarg && plural_eval (pexp->val.args[1], n);
-+ else
-+ {
-+ unsigned long int rightarg = plural_eval (pexp->val.args[1], n);
-+
-+ switch (pexp->operation)
-+ {
-+ case mult:
-+ return leftarg * rightarg;
-+ case divide:
-+#if !INTDIV0_RAISES_SIGFPE
-+ if (rightarg == 0)
-+ raise (SIGFPE);
-+#endif
-+ return leftarg / rightarg;
-+ case module:
-+#if !INTDIV0_RAISES_SIGFPE
-+ if (rightarg == 0)
-+ raise (SIGFPE);
-+#endif
-+ return leftarg % rightarg;
-+ case plus:
-+ return leftarg + rightarg;
-+ case minus:
-+ return leftarg - rightarg;
-+ case less_than:
-+ return leftarg < rightarg;
-+ case greater_than:
-+ return leftarg > rightarg;
-+ case less_or_equal:
-+ return leftarg <= rightarg;
-+ case greater_or_equal:
-+ return leftarg >= rightarg;
-+ case equal:
-+ return leftarg == rightarg;
-+ case not_equal:
-+ return leftarg != rightarg;
-+ default:
-+ break;
-+ }
-+ }
-+ /* NOTREACHED */
-+ break;
-+ }
-+ case 3:
-+ {
-+ /* pexp->operation must be qmop. */
-+ unsigned long int boolarg = plural_eval (pexp->val.args[0], n);
-+ return plural_eval (pexp->val.args[boolarg ? 1 : 2], n);
-+ }
-+ }
-+ /* NOTREACHED */
-+ return 0;
-+}
---- lrzsz-0.12.20.safe/intl/explodename.c 1998-04-26 09:22:37.000000000 -0400
-+++ lrzsz-0.12.20/intl/explodename.c 2004-09-12 14:40:34.395742008 -0400
-@@ -1,19 +1,20 @@
--/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-+/* Copyright (C) 1995-1998, 2000-2001, 2003 Free Software Foundation, Inc.
- Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-
- #ifdef HAVE_CONFIG_H
- # include <config.h>
-@@ -36,18 +37,23 @@
-
- /* @@ end of prolog @@ */
-
-+char *
-+_nl_find_language (const char *name)
-+{
-+ while (name[0] != '\0' && name[0] != '_' && name[0] != '@'
-+ && name[0] != '+' && name[0] != ',')
-+ ++name;
-+
-+ return (char *) name;
-+}
-+
-+
- int
--_nl_explode_name (name, language, modifier, territory, codeset,
-- normalized_codeset, special, sponsor, revision)
-- char *name;
-- const char **language;
-- const char **modifier;
-- const char **territory;
-- const char **codeset;
-- const char **normalized_codeset;
-- const char **special;
-- const char **sponsor;
-- const char **revision;
-+_nl_explode_name (char *name,
-+ const char **language, const char **modifier,
-+ const char **territory, const char **codeset,
-+ const char **normalized_codeset, const char **special,
-+ const char **sponsor, const char **revision)
- {
- enum { undecided, xpg, cen } syntax;
- char *cp;
-@@ -67,9 +73,7 @@
- mask = 0;
- syntax = undecided;
- *language = cp = name;
-- while (cp[0] != '\0' && cp[0] != '_' && cp[0] != '@'
-- && cp[0] != '+' && cp[0] != ',')
-- ++cp;
-+ cp = _nl_find_language (*language);
-
- if (*language == cp)
- /* This does not make sense: language has to be specified. Use
---- lrzsz-0.12.20.safe/intl/finddomain.c 1998-04-26 09:22:36.000000000 -0400
-+++ lrzsz-0.12.20/intl/finddomain.c 2004-09-12 14:40:34.415738968 -0400
-@@ -1,64 +1,40 @@
- /* Handle list of needed message catalogs
-- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-- Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-+ Copyright (C) 1995-1999, 2000-2001, 2003 Free Software Foundation, Inc.
-+ Written by Ulrich Drepper <drepper@gnu.org>, 1995.
-
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-
- #ifdef HAVE_CONFIG_H
- # include <config.h>
- #endif
-
--#include <ctype.h>
--#include <errno.h>
- #include <stdio.h>
- #include <sys/types.h>
--
--#if defined STDC_HEADERS || defined _LIBC
--# include <stdlib.h>
--#else
--# ifdef HAVE_MALLOC_H
--# include <malloc.h>
--# else
--void free ();
--# endif
--#endif
--
--#if defined HAVE_STRING_H || defined _LIBC
--# include <string.h>
--#else
--# include <strings.h>
--# ifndef memcpy
--# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
--# endif
--#endif
--#if !HAVE_STRCHR && !defined _LIBC
--# ifndef strchr
--# define strchr index
--# endif
--#endif
-+#include <stdlib.h>
-+#include <string.h>
-
- #if defined HAVE_UNISTD_H || defined _LIBC
- # include <unistd.h>
- #endif
-
--#include "gettext.h"
- #include "gettextP.h"
- #ifdef _LIBC
- # include <libintl.h>
- #else
--# include "libgettext.h"
-+# include "libgnuintl.h"
- #endif
-
- /* @@ end of prolog @@ */
-@@ -70,10 +46,9 @@
- the DOMAINNAME and CATEGORY parameters with respect to the currently
- established bindings. */
- struct loaded_l10nfile *
--_nl_find_domain (dirname, locale, domainname)
-- const char *dirname;
-- char *locale;
-- const char *domainname;
-+internal_function
-+_nl_find_domain (const char *dirname, char *locale,
-+ const char *domainname, struct binding *domainbinding)
- {
- struct loaded_l10nfile *retval;
- const char *language;
-@@ -95,9 +70,9 @@
-
- language[_territory][+audience][+special][,[sponsor][_revision]]
-
-- Beside the first all of them are allowed to be missing. If the
-- full specified locale is not found, the less specific one are
-- looked for. The various part will be stripped of according to
-+ Beside the first part all of them are allowed to be missing. If
-+ the full specified locale is not found, the less specific one are
-+ looked for. The various parts will be stripped off according to
- the following order:
- (1) revision
- (2) sponsor
-@@ -119,7 +94,7 @@
- int cnt;
-
- if (retval->decided == 0)
-- _nl_load_domain (retval);
-+ _nl_load_domain (retval, domainbinding);
-
- if (retval->data != NULL)
- return retval;
-@@ -127,7 +102,7 @@
- for (cnt = 0; retval->successor[cnt] != NULL; ++cnt)
- {
- if (retval->successor[cnt]->decided == 0)
-- _nl_load_domain (retval->successor[cnt]);
-+ _nl_load_domain (retval->successor[cnt], domainbinding);
-
- if (retval->successor[cnt]->data != NULL)
- break;
-@@ -142,12 +117,18 @@
- alias_value = _nl_expand_alias (locale);
- if (alias_value != NULL)
- {
-+#if defined _LIBC || defined HAVE_STRDUP
-+ locale = strdup (alias_value);
-+ if (locale == NULL)
-+ return NULL;
-+#else
- size_t len = strlen (alias_value) + 1;
- locale = (char *) malloc (len);
- if (locale == NULL)
- return NULL;
-
- memcpy (locale, alias_value, len);
-+#endif
- }
-
- /* Now we determine the single parts of the locale name. First
-@@ -168,14 +149,14 @@
- return NULL;
-
- if (retval->decided == 0)
-- _nl_load_domain (retval);
-+ _nl_load_domain (retval, domainbinding);
- if (retval->data == NULL)
- {
- int cnt;
- for (cnt = 0; retval->successor[cnt] != NULL; ++cnt)
- {
- if (retval->successor[cnt]->decided == 0)
-- _nl_load_domain (retval->successor[cnt]);
-+ _nl_load_domain (retval->successor[cnt], domainbinding);
- if (retval->successor[cnt]->data != NULL)
- break;
- }
-@@ -185,5 +166,27 @@
- if (alias_value != NULL)
- free (locale);
-
-+ /* The space for normalized_codeset is dynamically allocated. Free it. */
-+ if (mask & XPG_NORM_CODESET)
-+ free ((void *) normalized_codeset);
-+
- return retval;
- }
-+
-+
-+#ifdef _LIBC
-+libc_freeres_fn (free_mem)
-+{
-+ struct loaded_l10nfile *runp = _nl_loaded_domains;
-+
-+ while (runp != NULL)
-+ {
-+ struct loaded_l10nfile *here = runp;
-+ if (runp->data != NULL)
-+ _nl_unload_domain ((struct loaded_domain *) runp->data);
-+ runp = runp->next;
-+ free ((char *) here->filename);
-+ free (here);
-+ }
-+}
-+#endif
---- lrzsz-0.12.20.safe/intl/gettext.c 1998-04-26 09:22:36.000000000 -0400
-+++ lrzsz-0.12.20/intl/gettext.c 2004-09-12 14:40:34.420738208 -0400
-@@ -1,19 +1,20 @@
--/* Implementation of gettext(3) function
-- Copyright (C) 1995, 1997 Free Software Foundation, Inc.
-+/* Implementation of gettext(3) function.
-+ Copyright (C) 1995, 1997, 2000-2003 Free Software Foundation, Inc.
-
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-
- #ifdef HAVE_CONFIG_H
- # include <config.h>
-@@ -23,21 +24,14 @@
- # define __need_NULL
- # include <stddef.h>
- #else
--# ifdef STDC_HEADERS
--# include <stdlib.h> /* Just for NULL. */
--# else
--# ifdef HAVE_STRING_H
--# include <string.h>
--# else
--# define NULL ((void *) 0)
--# endif
--# endif
-+# include <stdlib.h> /* Just for NULL. */
- #endif
-
-+#include "gettextP.h"
- #ifdef _LIBC
- # include <libintl.h>
- #else
--# include "libgettext.h"
-+# include "libgnuintl.h"
- #endif
-
- /* @@ end of prolog @@ */
-@@ -48,20 +42,19 @@
- prefix. So we have to make a difference here. */
- #ifdef _LIBC
- # define GETTEXT __gettext
--# define DGETTEXT __dgettext
-+# define DCGETTEXT INTUSE(__dcgettext)
- #else
--# define GETTEXT gettext__
--# define DGETTEXT dgettext__
-+# define GETTEXT libintl_gettext
-+# define DCGETTEXT libintl_dcgettext
- #endif
-
- /* Look up MSGID in the current default message catalog for the current
- LC_MESSAGES locale. If not found, returns MSGID itself (the default
- text). */
- char *
--GETTEXT (msgid)
-- const char *msgid;
-+GETTEXT (const char *msgid)
- {
-- return DGETTEXT (NULL, msgid);
-+ return DCGETTEXT (NULL, msgid, LC_MESSAGES);
- }
-
- #ifdef _LIBC
---- lrzsz-0.12.20.safe/intl/gettext.h 1998-04-26 09:22:35.000000000 -0400
-+++ lrzsz-0.12.20/intl/gettext.h 1969-12-31 19:00:00.000000000 -0500
-@@ -1,105 +0,0 @@
--/* Internal header for GNU gettext internationalization functions
-- Copyright (C) 1995, 1997 Free Software Foundation, Inc.
--
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-- any later version.
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU Library General Public
-- License along with the GNU C Library; see the file COPYING.LIB. If not,
-- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-- Boston, MA 02111-1307, USA. */
--
--#ifndef _GETTEXT_H
--#define _GETTEXT_H 1
--
--#include <stdio.h>
--
--#if HAVE_LIMITS_H || _LIBC
--# include <limits.h>
--#endif
--
--/* @@ end of prolog @@ */
--
--/* The magic number of the GNU message catalog format. */
--#define _MAGIC 0x950412de
--#define _MAGIC_SWAPPED 0xde120495
--
--/* Revision number of the currently used .mo (binary) file format. */
--#define MO_REVISION_NUMBER 0
--
--/* The following contortions are an attempt to use the C preprocessor
-- to determine an unsigned integral type that is 32 bits wide. An
-- alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but
-- doing that would require that the configure script compile and *run*
-- the resulting executable. Locally running cross-compiled executables
-- is usually not possible. */
--
--#if __STDC__
--# define UINT_MAX_32_BITS 4294967295U
--#else
--# define UINT_MAX_32_BITS 0xFFFFFFFF
--#endif
--
--/* If UINT_MAX isn't defined, assume it's a 32-bit type.
-- This should be valid for all systems GNU cares about because
-- that doesn't include 16-bit systems, and only modern systems
-- (that certainly have <limits.h>) have 64+-bit integral types. */
--
--#ifndef UINT_MAX
--# define UINT_MAX UINT_MAX_32_BITS
--#endif
--
--#if UINT_MAX == UINT_MAX_32_BITS
--typedef unsigned nls_uint32;
--#else
--# if USHRT_MAX == UINT_MAX_32_BITS
--typedef unsigned short nls_uint32;
--# else
--# if ULONG_MAX == UINT_MAX_32_BITS
--typedef unsigned long nls_uint32;
--# else
-- /* The following line is intended to throw an error. Using #error is
-- not portable enough. */
-- "Cannot determine unsigned 32-bit data type."
--# endif
--# endif
--#endif
--
--
--/* Header for binary .mo file format. */
--struct mo_file_header
--{
-- /* The magic number. */
-- nls_uint32 magic;
-- /* The revision number of the file format. */
-- nls_uint32 revision;
-- /* The number of strings pairs. */
-- nls_uint32 nstrings;
-- /* Offset of table with start offsets of original strings. */
-- nls_uint32 orig_tab_offset;
-- /* Offset of table with start offsets of translation strings. */
-- nls_uint32 trans_tab_offset;
-- /* Size of hashing table. */
-- nls_uint32 hash_tab_size;
-- /* Offset of first hashing entry. */
-- nls_uint32 hash_tab_offset;
--};
--
--struct string_desc
--{
-- /* Length of addressed string. */
-- nls_uint32 length;
-- /* Offset of string in file. */
-- nls_uint32 offset;
--};
--
--/* @@ begin of epilog @@ */
--
--#endif /* gettext.h */
---- lrzsz-0.12.20.safe/intl/gettextP.h 1998-04-26 09:22:35.000000000 -0400
-+++ lrzsz-0.12.20/intl/gettextP.h 2004-09-12 14:40:34.426737296 -0400
-@@ -1,33 +1,53 @@
--/* Header describing internals of gettext library
-- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-+/* Header describing internals of libintl library.
-+ Copyright (C) 1995-1999, 2000-2003 Free Software Foundation, Inc.
-+ Written by Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-
- #ifndef _GETTEXTP_H
- #define _GETTEXTP_H
-
-+#include <stddef.h> /* Get size_t. */
-+
-+#ifdef _LIBC
-+# include "../iconv/gconv_int.h"
-+#else
-+# if HAVE_ICONV
-+# include <iconv.h>
-+# endif
-+#endif
-+
- #include "loadinfo.h"
-
-+#include "gmo.h" /* Get nls_uint32. */
-+
- /* @@ end of prolog @@ */
-
--#ifndef PARAMS
--# if __STDC__
--# define PARAMS(args) args
--# else
--# define PARAMS(args) ()
--# endif
-+#ifndef internal_function
-+# define internal_function
-+#endif
-+
-+#ifndef attribute_hidden
-+# define attribute_hidden
-+#endif
-+
-+/* Tell the compiler when a conditional or integer expression is
-+ almost always true or almost always false. */
-+#ifndef HAVE_BUILTIN_EXPECT
-+# define __builtin_expect(expr, val) (expr)
- #endif
-
- #ifndef W
-@@ -35,38 +55,160 @@
- #endif
-
-
--static nls_uint32 SWAP PARAMS ((nls_uint32 i));
--
-+#ifdef _LIBC
-+# include <byteswap.h>
-+# define SWAP(i) bswap_32 (i)
-+#else
- static inline nls_uint32
- SWAP (i)
- nls_uint32 i;
- {
- return (i << 24) | ((i & 0xff00) << 8) | ((i >> 8) & 0xff00) | (i >> 24);
- }
-+#endif
-+
-
-+/* In-memory representation of system dependent string. */
-+struct sysdep_string_desc
-+{
-+ /* Length of addressed string, including the trailing NUL. */
-+ size_t length;
-+ /* Pointer to addressed string. */
-+ const char *pointer;
-+};
-
-+/* The representation of an opened message catalog. */
- struct loaded_domain
- {
-+ /* Pointer to memory containing the .mo file. */
- const char *data;
-+ /* 1 if the memory is mmap()ed, 0 if the memory is malloc()ed. */
-+ int use_mmap;
-+ /* Size of mmap()ed memory. */
-+ size_t mmap_size;
-+ /* 1 if the .mo file uses a different endianness than this machine. */
- int must_swap;
-+ /* Pointer to additional malloc()ed memory. */
-+ void *malloced;
-+
-+ /* Number of static strings pairs. */
- nls_uint32 nstrings;
-- struct string_desc *orig_tab;
-- struct string_desc *trans_tab;
-+ /* Pointer to descriptors of original strings in the file. */
-+ const struct string_desc *orig_tab;
-+ /* Pointer to descriptors of translated strings in the file. */
-+ const struct string_desc *trans_tab;
-+
-+ /* Number of system dependent strings pairs. */
-+ nls_uint32 n_sysdep_strings;
-+ /* Pointer to descriptors of original sysdep strings. */
-+ const struct sysdep_string_desc *orig_sysdep_tab;
-+ /* Pointer to descriptors of translated sysdep strings. */
-+ const struct sysdep_string_desc *trans_sysdep_tab;
-+
-+ /* Size of hash table. */
- nls_uint32 hash_size;
-- nls_uint32 *hash_tab;
-+ /* Pointer to hash table. */
-+ const nls_uint32 *hash_tab;
-+ /* 1 if the hash table uses a different endianness than this machine. */
-+ int must_swap_hash_tab;
-+
-+ int codeset_cntr;
-+#ifdef _LIBC
-+ __gconv_t conv;
-+#else
-+# if HAVE_ICONV
-+ iconv_t conv;
-+# endif
-+#endif
-+ char **conv_tab;
-+
-+ struct expression *plural;
-+ unsigned long int nplurals;
- };
-
-+/* We want to allocate a string at the end of the struct. But ISO C
-+ doesn't allow zero sized arrays. */
-+#ifdef __GNUC__
-+# define ZERO 0
-+#else
-+# define ZERO 1
-+#endif
-+
-+/* A set of settings bound to a message domain. Used to store settings
-+ from bindtextdomain() and bind_textdomain_codeset(). */
- struct binding
- {
- struct binding *next;
-- char *domainname;
- char *dirname;
-+ int codeset_cntr; /* Incremented each time codeset changes. */
-+ char *codeset;
-+ char domainname[ZERO];
- };
-
--struct loaded_l10nfile *_nl_find_domain PARAMS ((const char *__dirname,
-- char *__locale,
-- const char *__domainname));
--void _nl_load_domain PARAMS ((struct loaded_l10nfile *__domain));
-+/* A counter which is incremented each time some previous translations
-+ become invalid.
-+ This variable is part of the external ABI of the GNU libintl. */
-+extern int _nl_msg_cat_cntr;
-+
-+#ifndef _LIBC
-+const char *_nl_locale_name (int category, const char *categoryname);
-+#endif
-+
-+struct loaded_l10nfile *_nl_find_domain (const char *__dirname, char *__locale,
-+ const char *__domainname,
-+ struct binding *__domainbinding)
-+ internal_function;
-+void _nl_load_domain (struct loaded_l10nfile *__domain,
-+ struct binding *__domainbinding)
-+ internal_function;
-+void _nl_unload_domain (struct loaded_domain *__domain)
-+ internal_function;
-+const char *_nl_init_domain_conv (struct loaded_l10nfile *__domain_file,
-+ struct loaded_domain *__domain,
-+ struct binding *__domainbinding)
-+ internal_function;
-+void _nl_free_domain_conv (struct loaded_domain *__domain)
-+ internal_function;
-+
-+char *_nl_find_msg (struct loaded_l10nfile *domain_file,
-+ struct binding *domainbinding, const char *msgid,
-+ size_t *lengthp)
-+ internal_function;
-+
-+#ifdef _LIBC
-+extern char *__gettext (const char *__msgid);
-+extern char *__dgettext (const char *__domainname, const char *__msgid);
-+extern char *__dcgettext (const char *__domainname, const char *__msgid,
-+ int __category);
-+extern char *__ngettext (const char *__msgid1, const char *__msgid2,
-+ unsigned long int __n);
-+extern char *__dngettext (const char *__domainname,
-+ const char *__msgid1, const char *__msgid2,
-+ unsigned long int n);
-+extern char *__dcngettext (const char *__domainname,
-+ const char *__msgid1, const char *__msgid2,
-+ unsigned long int __n, int __category);
-+extern char *__dcigettext (const char *__domainname,
-+ const char *__msgid1, const char *__msgid2,
-+ int __plural, unsigned long int __n,
-+ int __category);
-+extern char *__textdomain (const char *__domainname);
-+extern char *__bindtextdomain (const char *__domainname,
-+ const char *__dirname);
-+extern char *__bind_textdomain_codeset (const char *__domainname,
-+ const char *__codeset);
-+#else
-+/* Declare the exported libintl_* functions, in a way that allows us to
-+ call them under their real name. */
-+# undef _INTL_REDIRECT_INLINE
-+# undef _INTL_REDIRECT_MACROS
-+# define _INTL_REDIRECT_MACROS
-+# include "libgnuintl.h"
-+extern char *libintl_dcigettext (const char *__domainname,
-+ const char *__msgid1, const char *__msgid2,
-+ int __plural, unsigned long int __n,
-+ int __category);
-+#endif
-
- /* @@ begin of epilog @@ */
-
---- lrzsz-0.12.20.safe/intl/gmo.h 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/gmo.h 2004-09-12 14:40:34.431736536 -0400
-@@ -0,0 +1,149 @@
-+/* Description of GNU message catalog format: general file layout.
-+ Copyright (C) 1995, 1997, 2000-2002, 2004 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifndef _GETTEXT_H
-+#define _GETTEXT_H 1
-+
-+#include <limits.h>
-+
-+/* @@ end of prolog @@ */
-+
-+/* The magic number of the GNU message catalog format. */
-+#define _MAGIC 0x950412de
-+#define _MAGIC_SWAPPED 0xde120495
-+
-+/* Revision number of the currently used .mo (binary) file format. */
-+#define MO_REVISION_NUMBER 0
-+#define MO_REVISION_NUMBER_WITH_SYSDEP_I 1
-+
-+/* The following contortions are an attempt to use the C preprocessor
-+ to determine an unsigned integral type that is 32 bits wide. An
-+ alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but
-+ as of version autoconf-2.13, the AC_CHECK_SIZEOF macro doesn't work
-+ when cross-compiling. */
-+
-+#if __STDC__
-+# define UINT_MAX_32_BITS 4294967295U
-+#else
-+# define UINT_MAX_32_BITS 0xFFFFFFFF
-+#endif
-+
-+/* If UINT_MAX isn't defined, assume it's a 32-bit type.
-+ This should be valid for all systems GNU cares about because
-+ that doesn't include 16-bit systems, and only modern systems
-+ (that certainly have <limits.h>) have 64+-bit integral types. */
-+
-+#ifndef UINT_MAX
-+# define UINT_MAX UINT_MAX_32_BITS
-+#endif
-+
-+#if UINT_MAX == UINT_MAX_32_BITS
-+typedef unsigned nls_uint32;
-+#else
-+# if USHRT_MAX == UINT_MAX_32_BITS
-+typedef unsigned short nls_uint32;
-+# else
-+# if ULONG_MAX == UINT_MAX_32_BITS
-+typedef unsigned long nls_uint32;
-+# else
-+ /* The following line is intended to throw an error. Using #error is
-+ not portable enough. */
-+ "Cannot determine unsigned 32-bit data type."
-+# endif
-+# endif
-+#endif
-+
-+
-+/* Header for binary .mo file format. */
-+struct mo_file_header
-+{
-+ /* The magic number. */
-+ nls_uint32 magic;
-+ /* The revision number of the file format. */
-+ nls_uint32 revision;
-+
-+ /* The following are only used in .mo files with major revision 0 or 1. */
-+
-+ /* The number of strings pairs. */
-+ nls_uint32 nstrings;
-+ /* Offset of table with start offsets of original strings. */
-+ nls_uint32 orig_tab_offset;
-+ /* Offset of table with start offsets of translated strings. */
-+ nls_uint32 trans_tab_offset;
-+ /* Size of hash table. */
-+ nls_uint32 hash_tab_size;
-+ /* Offset of first hash table entry. */
-+ nls_uint32 hash_tab_offset;
-+
-+ /* The following are only used in .mo files with minor revision >= 1. */
-+
-+ /* The number of system dependent segments. */
-+ nls_uint32 n_sysdep_segments;
-+ /* Offset of table describing system dependent segments. */
-+ nls_uint32 sysdep_segments_offset;
-+ /* The number of system dependent strings pairs. */
-+ nls_uint32 n_sysdep_strings;
-+ /* Offset of table with start offsets of original sysdep strings. */
-+ nls_uint32 orig_sysdep_tab_offset;
-+ /* Offset of table with start offsets of translated sysdep strings. */
-+ nls_uint32 trans_sysdep_tab_offset;
-+};
-+
-+/* Descriptor for static string contained in the binary .mo file. */
-+struct string_desc
-+{
-+ /* Length of addressed string, not including the trailing NUL. */
-+ nls_uint32 length;
-+ /* Offset of string in file. */
-+ nls_uint32 offset;
-+};
-+
-+/* The following are only used in .mo files with minor revision >= 1. */
-+
-+/* Descriptor for system dependent string segment. */
-+struct sysdep_segment
-+{
-+ /* Length of addressed string, including the trailing NUL. */
-+ nls_uint32 length;
-+ /* Offset of string in file. */
-+ nls_uint32 offset;
-+};
-+
-+/* Descriptor for system dependent string. */
-+struct sysdep_string
-+{
-+ /* Offset of static string segments in file. */
-+ nls_uint32 offset;
-+ /* Alternating sequence of static and system dependent segments.
-+ The last segment is a static segment, including the trailing NUL. */
-+ struct segment_pair
-+ {
-+ /* Size of static segment. */
-+ nls_uint32 segsize;
-+ /* Reference to system dependent string segment, or ~0 at the end. */
-+ nls_uint32 sysdepref;
-+ } segments[1];
-+};
-+
-+/* Marker for the end of the segments[] array. This has the value 0xFFFFFFFF,
-+ regardless whether 'int' is 16 bit, 32 bit, or 64 bit. */
-+#define SEGMENTS_END ((nls_uint32) ~0)
-+
-+/* @@ begin of epilog @@ */
-+
-+#endif /* gettext.h */
---- lrzsz-0.12.20.safe/intl/hash-string.h 1998-04-26 09:22:36.000000000 -0400
-+++ lrzsz-0.12.20/intl/hash-string.h 2004-09-12 14:40:34.436735776 -0400
-@@ -1,35 +1,23 @@
--/* Implements a string hashing function.
-- Copyright (C) 1995, 1997 Free Software Foundation, Inc.
-+/* Description of GNU message catalog format: string hashing function.
-+ Copyright (C) 1995, 1997-1998, 2000-2003 Free Software Foundation, Inc.
-
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
-- License along with the GNU C Library; see the file COPYING.LIB. If not,
-- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-- Boston, MA 02111-1307, USA. */
--
--#ifdef HAVE_VALUES_H
--# include <values.h>
--#endif
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-
- /* @@ end of prolog @@ */
-
--#ifndef PARAMS
--# if __STDC__
--# define PARAMS(Args) Args
--# else
--# define PARAMS(Args) ()
--# endif
--#endif
--
- /* We assume to have `unsigned long int' value with at least 32 bits. */
- #define HASHWORDBITS 32
-
-@@ -37,11 +25,8 @@
- /* Defines the so called `hashpjw' function by P.J. Weinberger
- [see Aho/Sethi/Ullman, COMPILERS: Principles, Techniques and Tools,
- 1986, 1987 Bell Telephone Laboratories, Inc.] */
--static unsigned long hash_string PARAMS ((const char *__str_param));
--
--static inline unsigned long
--hash_string (str_param)
-- const char *str_param;
-+static inline unsigned long int
-+hash_string (const char *str_param)
- {
- unsigned long int hval, g;
- const char *str = str_param;
-@@ -51,8 +36,8 @@
- while (*str != '\0')
- {
- hval <<= 4;
-- hval += (unsigned long) *str++;
-- g = hval & ((unsigned long) 0xf << (HASHWORDBITS - 4));
-+ hval += (unsigned char) *str++;
-+ g = hval & ((unsigned long int) 0xf << (HASHWORDBITS - 4));
- if (g != 0)
- {
- hval ^= g >> (HASHWORDBITS - 8);
---- lrzsz-0.12.20.safe/intl/intl-compat.c 1998-04-26 09:20:52.000000000 -0400
-+++ lrzsz-0.12.20/intl/intl-compat.c 2004-09-12 14:40:34.441735016 -0400
-@@ -1,76 +1,131 @@
- /* intl-compat.c - Stub functions to call gettext functions from GNU gettext
- Library.
-- Copyright (C) 1995 Software Foundation, Inc.
-+ Copyright (C) 1995, 2000-2003 Software Foundation, Inc.
-
--This program is free software; you can redistribute it and/or modify
--it under the terms of the GNU General Public License as published by
--the Free Software Foundation; either version 2, or (at your option)
--any later version.
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-
--This program is distributed in the hope that it will be useful,
--but WITHOUT ANY WARRANTY; without even the implied warranty of
--MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--GNU General Public License for more details.
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-
--You should have received a copy of the GNU General Public License
--along with this program; if not, write to the Free Software
--Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-
- #ifdef HAVE_CONFIG_H
- # include <config.h>
- #endif
-
--#include "libgettext.h"
-+#include "gettextP.h"
-
- /* @@ end of prolog @@ */
-
-+/* This file redirects the gettext functions (without prefix) to those
-+ defined in the included GNU libintl library (with "libintl_" prefix).
-+ It is compiled into libintl in order to make the AM_GNU_GETTEXT test
-+ of gettext <= 0.11.2 work with the libintl library >= 0.11.3 which
-+ has the redirections primarily in the <libintl.h> include file.
-+ It is also compiled into libgnuintl so that libgnuintl.so can be used
-+ as LD_PRELOADable library on glibc systems, to provide the extra
-+ features that the functions in the libc don't have (namely, logging). */
-+
-
- #undef gettext
- #undef dgettext
- #undef dcgettext
-+#undef ngettext
-+#undef dngettext
-+#undef dcngettext
- #undef textdomain
- #undef bindtextdomain
-+#undef bind_textdomain_codeset
-+
-+
-+/* When building a DLL, we must export some functions. Note that because
-+ the functions are only defined for binary backward compatibility, we
-+ don't need to use __declspec(dllimport) in any case. */
-+#if defined _MSC_VER && BUILDING_DLL
-+# define DLL_EXPORTED __declspec(dllexport)
-+#else
-+# define DLL_EXPORTED
-+#endif
-
-
-+DLL_EXPORTED
- char *
--bindtextdomain (domainname, dirname)
-- const char *domainname;
-- const char *dirname;
-+gettext (const char *msgid)
- {
-- return bindtextdomain__ (domainname, dirname);
-+ return libintl_gettext (msgid);
- }
-
-
-+DLL_EXPORTED
- char *
--dcgettext (domainname, msgid, category)
-- const char *domainname;
-- const char *msgid;
-- int category;
-+dgettext (const char *domainname, const char *msgid)
- {
-- return dcgettext__ (domainname, msgid, category);
-+ return libintl_dgettext (domainname, msgid);
- }
-
-
-+DLL_EXPORTED
- char *
--dgettext (domainname, msgid)
-- const char *domainname;
-- const char *msgid;
-+dcgettext (const char *domainname, const char *msgid, int category)
- {
-- return dgettext__ (domainname, msgid);
-+ return libintl_dcgettext (domainname, msgid, category);
- }
-
-
-+DLL_EXPORTED
- char *
--gettext (msgid)
-- const char *msgid;
-+ngettext (const char *msgid1, const char *msgid2, unsigned long int n)
- {
-- return gettext__ (msgid);
-+ return libintl_ngettext (msgid1, msgid2, n);
- }
-
-
-+DLL_EXPORTED
- char *
--textdomain (domainname)
-- const char *domainname;
-+dngettext (const char *domainname,
-+ const char *msgid1, const char *msgid2, unsigned long int n)
- {
-- return textdomain__ (domainname);
-+ return libintl_dngettext (domainname, msgid1, msgid2, n);
-+}
-+
-+
-+DLL_EXPORTED
-+char *
-+dcngettext (const char *domainname,
-+ const char *msgid1, const char *msgid2, unsigned long int n,
-+ int category)
-+{
-+ return libintl_dcngettext (domainname, msgid1, msgid2, n, category);
-+}
-+
-+
-+DLL_EXPORTED
-+char *
-+textdomain (const char *domainname)
-+{
-+ return libintl_textdomain (domainname);
-+}
-+
-+
-+DLL_EXPORTED
-+char *
-+bindtextdomain (const char *domainname, const char *dirname)
-+{
-+ return libintl_bindtextdomain (domainname, dirname);
-+}
-+
-+
-+DLL_EXPORTED
-+char *
-+bind_textdomain_codeset (const char *domainname, const char *codeset)
-+{
-+ return libintl_bind_textdomain_codeset (domainname, codeset);
- }
---- lrzsz-0.12.20.safe/intl/l10nflist.c 1998-04-26 09:22:37.000000000 -0400
-+++ lrzsz-0.12.20/intl/l10nflist.c 2004-09-12 14:40:34.457732584 -0400
-@@ -1,52 +1,40 @@
--/* Handle list of needed message catalogs
-- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-- Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-+/* Copyright (C) 1995-1999, 2000-2003 Free Software Foundation, Inc.
-+ Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+/* Tell glibc's <string.h> to provide a prototype for stpcpy().
-+ This must come before <config.h> because <config.h> may include
-+ <features.h>, and once <features.h> has been included, it's too late. */
-+#ifndef _GNU_SOURCE
-+# define _GNU_SOURCE 1
-+#endif
-
- #ifdef HAVE_CONFIG_H
- # include <config.h>
- #endif
-
--
--#if defined HAVE_STRING_H || defined _LIBC
--# ifndef _GNU_SOURCE
--# define _GNU_SOURCE 1
--# endif
--# include <string.h>
--#else
--# include <strings.h>
--# ifndef memcpy
--# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
--# endif
--#endif
--#if !HAVE_STRCHR && !defined _LIBC
--# ifndef strchr
--# define strchr index
--# endif
--#endif
-+#include <string.h>
-
- #if defined _LIBC || defined HAVE_ARGZ_H
- # include <argz.h>
- #endif
- #include <ctype.h>
- #include <sys/types.h>
--
--#if defined STDC_HEADERS || defined _LIBC
--# include <stdlib.h>
--#endif
-+#include <stdlib.h>
-
- #include "loadinfo.h"
-
-@@ -65,23 +53,39 @@
- /* Rename the non ANSI C functions. This is required by the standard
- because some ANSI C functions will require linking with this object
- file and the name space must not be polluted. */
--# define stpcpy(dest, src) __stpcpy(dest, src)
-+# ifndef stpcpy
-+# define stpcpy(dest, src) __stpcpy(dest, src)
-+# endif
- #else
- # ifndef HAVE_STPCPY
--static char *stpcpy PARAMS ((char *dest, const char *src));
-+static char *stpcpy (char *dest, const char *src);
- # endif
- #endif
-
-+/* Pathname support.
-+ ISSLASH(C) tests whether C is a directory separator character.
-+ IS_ABSOLUTE_PATH(P) tests whether P is an absolute path. If it is not,
-+ it may be concatenated to a directory pathname.
-+ */
-+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
-+ /* Win32, OS/2, DOS */
-+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
-+# define HAS_DEVICE(P) \
-+ ((((P)[0] >= 'A' && (P)[0] <= 'Z') || ((P)[0] >= 'a' && (P)[0] <= 'z')) \
-+ && (P)[1] == ':')
-+# define IS_ABSOLUTE_PATH(P) (ISSLASH ((P)[0]) || HAS_DEVICE (P))
-+#else
-+ /* Unix */
-+# define ISSLASH(C) ((C) == '/')
-+# define IS_ABSOLUTE_PATH(P) ISSLASH ((P)[0])
-+#endif
-+
- /* Define function which are usually not available. */
-
- #if !defined _LIBC && !defined HAVE___ARGZ_COUNT
- /* Returns the number of strings in ARGZ. */
--static size_t argz_count__ PARAMS ((const char *argz, size_t len));
--
- static size_t
--argz_count__ (argz, len)
-- const char *argz;
-- size_t len;
-+argz_count__ (const char *argz, size_t len)
- {
- size_t count = 0;
- while (len > 0)
-@@ -95,18 +99,17 @@
- }
- # undef __argz_count
- # define __argz_count(argz, len) argz_count__ (argz, len)
-+#else
-+# ifdef _LIBC
-+# define __argz_count(argz, len) INTUSE(__argz_count) (argz, len)
-+# endif
- #endif /* !_LIBC && !HAVE___ARGZ_COUNT */
-
- #if !defined _LIBC && !defined HAVE___ARGZ_STRINGIFY
- /* Make '\0' separated arg vector ARGZ printable by converting all the '\0's
- except the last into the character SEP. */
--static void argz_stringify__ PARAMS ((char *argz, size_t len, int sep));
--
- static void
--argz_stringify__ (argz, len, sep)
-- char *argz;
-- size_t len;
-- int sep;
-+argz_stringify__ (char *argz, size_t len, int sep)
- {
- while (len > 0)
- {
-@@ -119,17 +122,16 @@
- }
- # undef __argz_stringify
- # define __argz_stringify(argz, len, sep) argz_stringify__ (argz, len, sep)
-+#else
-+# ifdef _LIBC
-+# define __argz_stringify(argz, len, sep) \
-+ INTUSE(__argz_stringify) (argz, len, sep)
-+# endif
- #endif /* !_LIBC && !HAVE___ARGZ_STRINGIFY */
-
- #if !defined _LIBC && !defined HAVE___ARGZ_NEXT
--static char *argz_next__ PARAMS ((char *argz, size_t argz_len,
-- const char *entry));
--
- static char *
--argz_next__ (argz, argz_len, entry)
-- char *argz;
-- size_t argz_len;
-- const char *entry;
-+argz_next__ (char *argz, size_t argz_len, const char *entry)
- {
- if (entry)
- {
-@@ -150,11 +152,8 @@
-
-
- /* Return number of bits set in X. */
--static int pop PARAMS ((int x));
--
- static inline int
--pop (x)
-- int x;
-+pop (int x)
- {
- /* We assume that no more than 16 bits are used. */
- x = ((x & ~0x5555) >> 1) + (x & 0x5555);
-@@ -167,31 +166,27 @@
-
- \f
- struct loaded_l10nfile *
--_nl_make_l10nflist (l10nfile_list, dirlist, dirlist_len, mask, language,
-- territory, codeset, normalized_codeset, modifier, special,
-- sponsor, revision, filename, do_allocate)
-- struct loaded_l10nfile **l10nfile_list;
-- const char *dirlist;
-- size_t dirlist_len;
-- int mask;
-- const char *language;
-- const char *territory;
-- const char *codeset;
-- const char *normalized_codeset;
-- const char *modifier;
-- const char *special;
-- const char *sponsor;
-- const char *revision;
-- const char *filename;
-- int do_allocate;
-+_nl_make_l10nflist (struct loaded_l10nfile **l10nfile_list,
-+ const char *dirlist, size_t dirlist_len,
-+ int mask, const char *language, const char *territory,
-+ const char *codeset, const char *normalized_codeset,
-+ const char *modifier, const char *special,
-+ const char *sponsor, const char *revision,
-+ const char *filename, int do_allocate)
- {
- char *abs_filename;
-- struct loaded_l10nfile *last = NULL;
-+ struct loaded_l10nfile **lastp;
- struct loaded_l10nfile *retval;
- char *cp;
-+ size_t dirlist_count;
- size_t entries;
- int cnt;
-
-+ /* If LANGUAGE contains an absolute directory specification, we ignore
-+ DIRLIST. */
-+ if (IS_ABSOLUTE_PATH (language))
-+ dirlist_len = 0;
-+
- /* Allocate room for the full file name. */
- abs_filename = (char *) malloc (dirlist_len
- + strlen (language)
-@@ -209,7 +204,7 @@
- + (((mask & CEN_SPONSOR) != 0
- || (mask & CEN_REVISION) != 0)
- ? (1 + ((mask & CEN_SPONSOR) != 0
-- ? strlen (sponsor) + 1 : 0)
-+ ? strlen (sponsor) : 0)
- + ((mask & CEN_REVISION) != 0
- ? strlen (revision) + 1 : 0)) : 0)
- + 1 + strlen (filename) + 1);
-@@ -217,14 +212,16 @@
- if (abs_filename == NULL)
- return NULL;
-
-- retval = NULL;
-- last = NULL;
--
- /* Construct file name. */
-- memcpy (abs_filename, dirlist, dirlist_len);
-- __argz_stringify (abs_filename, dirlist_len, ':');
-- cp = abs_filename + (dirlist_len - 1);
-- *cp++ = '/';
-+ cp = abs_filename;
-+ if (dirlist_len > 0)
-+ {
-+ memcpy (cp, dirlist, dirlist_len);
-+ __argz_stringify (cp, dirlist_len, PATH_SEPARATOR);
-+ cp += dirlist_len;
-+ cp[-1] = '/';
-+ }
-+
- cp = stpcpy (cp, language);
-
- if ((mask & TERRITORY) != 0)
-@@ -271,7 +268,7 @@
-
- /* Look in list of already loaded domains whether it is already
- available. */
-- last = NULL;
-+ lastp = l10nfile_list;
- for (retval = *l10nfile_list; retval != NULL; retval = retval->next)
- if (retval->filename != NULL)
- {
-@@ -286,7 +283,7 @@
- break;
- }
-
-- last = retval;
-+ lastp = &retval->next;
- }
-
- if (retval != NULL || do_allocate == 0)
-@@ -295,48 +292,66 @@
- return retval;
- }
-
-- retval = (struct loaded_l10nfile *)
-- malloc (sizeof (*retval) + (__argz_count (dirlist, dirlist_len)
-- * (1 << pop (mask))
-- * sizeof (struct loaded_l10nfile *)));
-+ dirlist_count = (dirlist_len > 0 ? __argz_count (dirlist, dirlist_len) : 1);
-+
-+ /* Allocate a new loaded_l10nfile. */
-+ retval =
-+ (struct loaded_l10nfile *)
-+ malloc (sizeof (*retval)
-+ + (((dirlist_count << pop (mask)) + (dirlist_count > 1 ? 1 : 0))
-+ * sizeof (struct loaded_l10nfile *)));
- if (retval == NULL)
- return NULL;
-
- retval->filename = abs_filename;
-- retval->decided = (__argz_count (dirlist, dirlist_len) != 1
-+
-+ /* We set retval->data to NULL here; it is filled in later.
-+ Setting retval->decided to 1 here means that retval does not
-+ correspond to a real file (dirlist_count > 1) or is not worth
-+ looking up (if an unnormalized codeset was specified). */
-+ retval->decided = (dirlist_count > 1
- || ((mask & XPG_CODESET) != 0
- && (mask & XPG_NORM_CODESET) != 0));
- retval->data = NULL;
-
-- if (last == NULL)
-- {
-- retval->next = *l10nfile_list;
-- *l10nfile_list = retval;
-- }
-- else
-- {
-- retval->next = last->next;
-- last->next = retval;
-- }
-+ retval->next = *lastp;
-+ *lastp = retval;
-
- entries = 0;
-- /* If the DIRLIST is a real list the RETVAL entry corresponds not to
-- a real file. So we have to use the DIRLIST separation mechanism
-- of the inner loop. */
-- cnt = __argz_count (dirlist, dirlist_len) == 1 ? mask - 1 : mask;
-- for (; cnt >= 0; --cnt)
-+ /* Recurse to fill the inheritance list of RETVAL.
-+ If the DIRLIST is a real list (i.e. DIRLIST_COUNT > 1), the RETVAL
-+ entry does not correspond to a real file; retval->filename contains
-+ colons. In this case we loop across all elements of DIRLIST and
-+ across all bit patterns dominated by MASK.
-+ If the DIRLIST is a single directory or entirely redundant (i.e.
-+ DIRLIST_COUNT == 1), we loop across all bit patterns dominated by
-+ MASK, excluding MASK itself.
-+ In either case, we loop down from MASK to 0. This has the effect
-+ that the extra bits in the locale name are dropped in this order:
-+ first the modifier, then the territory, then the codeset, then the
-+ normalized_codeset. */
-+ for (cnt = dirlist_count > 1 ? mask : mask - 1; cnt >= 0; --cnt)
- if ((cnt & ~mask) == 0
- && ((cnt & CEN_SPECIFIC) == 0 || (cnt & XPG_SPECIFIC) == 0)
- && ((cnt & XPG_CODESET) == 0 || (cnt & XPG_NORM_CODESET) == 0))
- {
-- /* Iterate over all elements of the DIRLIST. */
-- char *dir = NULL;
-+ if (dirlist_count > 1)
-+ {
-+ /* Iterate over all elements of the DIRLIST. */
-+ char *dir = NULL;
-
-- while ((dir = __argz_next ((char *) dirlist, dirlist_len, dir))
-- != NULL)
-+ while ((dir = __argz_next ((char *) dirlist, dirlist_len, dir))
-+ != NULL)
-+ retval->successor[entries++]
-+ = _nl_make_l10nflist (l10nfile_list, dir, strlen (dir) + 1,
-+ cnt, language, territory, codeset,
-+ normalized_codeset, modifier, special,
-+ sponsor, revision, filename, 1);
-+ }
-+ else
- retval->successor[entries++]
-- = _nl_make_l10nflist (l10nfile_list, dir, strlen (dir) + 1, cnt,
-- language, territory, codeset,
-+ = _nl_make_l10nflist (l10nfile_list, dirlist, dirlist_len,
-+ cnt, language, territory, codeset,
- normalized_codeset, modifier, special,
- sponsor, revision, filename, 1);
- }
-@@ -347,11 +362,10 @@
- \f
- /* Normalize codeset name. There is no standard for the codeset
- names. Normalization allows the user to use any of the common
-- names. */
-+ names. The return value is dynamically allocated and has to be
-+ freed by the caller. */
- const char *
--_nl_normalize_codeset (codeset, name_len)
-- const char *codeset;
-- size_t name_len;
-+_nl_normalize_codeset (const char *codeset, size_t name_len)
- {
- int len = 0;
- int only_digit = 1;
-@@ -360,11 +374,11 @@
- size_t cnt;
-
- for (cnt = 0; cnt < name_len; ++cnt)
-- if (isalnum (codeset[cnt]))
-+ if (isalnum ((unsigned char) codeset[cnt]))
- {
- ++len;
-
-- if (isalpha (codeset[cnt]))
-+ if (isalpha ((unsigned char) codeset[cnt]))
- only_digit = 0;
- }
-
-@@ -378,9 +392,9 @@
- wp = retval;
-
- for (cnt = 0; cnt < name_len; ++cnt)
-- if (isalpha (codeset[cnt]))
-- *wp++ = tolower (codeset[cnt]);
-- else if (isdigit (codeset[cnt]))
-+ if (isalpha ((unsigned char) codeset[cnt]))
-+ *wp++ = tolower ((unsigned char) codeset[cnt]);
-+ else if (isdigit ((unsigned char) codeset[cnt]))
- *wp++ = codeset[cnt];
-
- *wp = '\0';
-@@ -398,9 +412,7 @@
- to be defined. */
- #if !_LIBC && !HAVE_STPCPY
- static char *
--stpcpy (dest, src)
-- char *dest;
-- const char *src;
-+stpcpy (char *dest, const char *src)
- {
- while ((*dest++ = *src++) != '\0')
- /* Do nothing. */ ;
---- lrzsz-0.12.20.safe/intl/libgettext.h 1998-04-26 09:22:36.000000000 -0400
-+++ lrzsz-0.12.20/intl/libgettext.h 1969-12-31 19:00:00.000000000 -0500
-@@ -1,182 +0,0 @@
--/* Message catalogs for internationalization.
-- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
--
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-- any later version.
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
--
--/* Because on some systems (e.g. Solaris) we sometimes have to include
-- the systems libintl.h as well as this file we have more complex
-- include protection above. But the systems header might perhaps also
-- define _LIBINTL_H and therefore we have to protect the definition here. */
--
--#if !defined (_LIBINTL_H) || !defined (_LIBGETTEXT_H)
--#if !defined (_LIBINTL_H)
--# define _LIBINTL_H 1
--#endif
--#define _LIBGETTEXT_H 1
--
--/* We define an additional symbol to signal that we use the GNU
-- implementation of gettext. */
--#define __USE_GNU_GETTEXT 1
--
--#include <sys/types.h>
--
--#if HAVE_LOCALE_H
--# include <locale.h>
--#endif
--
--
--#ifdef __cplusplus
--extern "C" {
--#endif
--
--/* @@ end of prolog @@ */
--
--#ifndef PARAMS
--# if __STDC__
--# define PARAMS(args) args
--# else
--# define PARAMS(args) ()
--# endif
--#endif
--
--#ifndef NULL
--# if !defined __cplusplus || defined __GNUC__
--# define NULL ((void *) 0)
--# else
--# define NULL (0)
--# endif
--#endif
--
--#if !HAVE_LC_MESSAGES
--/* This value determines the behaviour of the gettext() and dgettext()
-- function. But some system does not have this defined. Define it
-- to a default value. */
--# define LC_MESSAGES (-1)
--#endif
--
--
--/* Declarations for gettext-using-catgets interface. Derived from
-- Jim Meyering's libintl.h. */
--struct _msg_ent
--{
-- const char *_msg;
-- int _msg_number;
--};
--
--
--#if HAVE_CATGETS
--/* These two variables are defined in the automatically by po-to-tbl.sed
-- generated file `cat-id-tbl.c'. */
--extern const struct _msg_ent _msg_tbl[];
--extern int _msg_tbl_length;
--#endif
--
--
--/* For automatical extraction of messages sometimes no real
-- translation is needed. Instead the string itself is the result. */
--#define gettext_noop(Str) (Str)
--
--/* Look up MSGID in the current default message catalog for the current
-- LC_MESSAGES locale. If not found, returns MSGID itself (the default
-- text). */
--extern char *gettext PARAMS ((const char *__msgid));
--extern char *gettext__ PARAMS ((const char *__msgid));
--
--/* Look up MSGID in the DOMAINNAME message catalog for the current
-- LC_MESSAGES locale. */
--extern char *dgettext PARAMS ((const char *__domainname, const char *__msgid));
--extern char *dgettext__ PARAMS ((const char *__domainname,
-- const char *__msgid));
--
--/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
-- locale. */
--extern char *dcgettext PARAMS ((const char *__domainname, const char *__msgid,
-- int __category));
--extern char *dcgettext__ PARAMS ((const char *__domainname,
-- const char *__msgid, int __category));
--
--
--/* Set the current default message catalog to DOMAINNAME.
-- If DOMAINNAME is null, return the current default.
-- If DOMAINNAME is "", reset to the default of "messages". */
--extern char *textdomain PARAMS ((const char *__domainname));
--extern char *textdomain__ PARAMS ((const char *__domainname));
--
--/* Specify that the DOMAINNAME message catalog will be found
-- in DIRNAME rather than in the system locale data base. */
--extern char *bindtextdomain PARAMS ((const char *__domainname,
-- const char *__dirname));
--extern char *bindtextdomain__ PARAMS ((const char *__domainname,
-- const char *__dirname));
--
--#if ENABLE_NLS
--
--/* Solaris 2.3 has the gettext function but dcgettext is missing.
-- So we omit this optimization for Solaris 2.3. BTW, Solaris 2.4
-- has dcgettext. */
--# if !HAVE_CATGETS && (!HAVE_GETTEXT || HAVE_DCGETTEXT)
--
--# define gettext(Msgid) \
-- dgettext (NULL, Msgid)
--
--# define dgettext(Domainname, Msgid) \
-- dcgettext (Domainname, Msgid, LC_MESSAGES)
--
--# if defined __GNUC__ && __GNUC__ == 2 && __GNUC_MINOR__ >= 7
--/* This global variable is defined in loadmsgcat.c. We need a sign,
-- whether a new catalog was loaded, which can be associated with all
-- translations. */
--extern int _nl_msg_cat_cntr;
--
--# define dcgettext(Domainname, Msgid, Category) \
-- (__extension__ \
-- ({ \
-- char *__result; \
-- if (__builtin_constant_p (Msgid)) \
-- { \
-- static char *__translation__; \
-- static int __catalog_counter__; \
-- if (! __translation__ || __catalog_counter__ != _nl_msg_cat_cntr) \
-- { \
-- __translation__ = \
-- dcgettext__ (Domainname, Msgid, Category); \
-- __catalog_counter__ = _nl_msg_cat_cntr; \
-- } \
-- __result = __translation__; \
-- } \
-- else \
-- __result = dcgettext__ (Domainname, Msgid, Category); \
-- __result; \
-- }))
--# endif
--# endif
--
--#else
--
--# define gettext(Msgid) (Msgid)
--# define dgettext(Domainname, Msgid) (Msgid)
--# define dcgettext(Domainname, Msgid, Category) (Msgid)
--# define textdomain(Domainname) while (0) /* nothing */
--# define bindtextdomain(Domainname, Dirname) while (0) /* nothing */
--
--#endif
--
--/* @@ begin of epilog @@ */
--
--#ifdef __cplusplus
--}
--#endif
--
--#endif
---- lrzsz-0.12.20.safe/intl/libgnuintl.h.in 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/libgnuintl.h.in 2004-09-12 14:40:34.462731824 -0400
-@@ -0,0 +1,383 @@
-+/* Message catalogs for internationalization.
-+ Copyright (C) 1995-1997, 2000-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifndef _LIBINTL_H
-+#define _LIBINTL_H 1
-+
-+#include <locale.h>
-+
-+/* The LC_MESSAGES locale category is the category used by the functions
-+ gettext() and dgettext(). It is specified in POSIX, but not in ANSI C.
-+ On systems that don't define it, use an arbitrary value instead.
-+ On Solaris, <locale.h> defines __LOCALE_H (or _LOCALE_H in Solaris 2.5)
-+ then includes <libintl.h> (i.e. this file!) and then only defines
-+ LC_MESSAGES. To avoid a redefinition warning, don't define LC_MESSAGES
-+ in this case. */
-+#if !defined LC_MESSAGES && !(defined __LOCALE_H || (defined _LOCALE_H && defined __sun))
-+# define LC_MESSAGES 1729
-+#endif
-+
-+/* We define an additional symbol to signal that we use the GNU
-+ implementation of gettext. */
-+#define __USE_GNU_GETTEXT 1
-+
-+/* Provide information about the supported file formats. Returns the
-+ maximum minor revision number supported for a given major revision. */
-+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) \
-+ ((major) == 0 ? 1 : -1)
-+
-+/* Resolve a platform specific conflict on DJGPP. GNU gettext takes
-+ precedence over _conio_gettext. */
-+#ifdef __DJGPP__
-+# undef gettext
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+
-+/* We redirect the functions to those prefixed with "libintl_". This is
-+ necessary, because some systems define gettext/textdomain/... in the C
-+ library (namely, Solaris 2.4 and newer, and GNU libc 2.0 and newer).
-+ If we used the unprefixed names, there would be cases where the
-+ definition in the C library would override the one in the libintl.so
-+ shared library. Recall that on ELF systems, the symbols are looked
-+ up in the following order:
-+ 1. in the executable,
-+ 2. in the shared libraries specified on the link command line, in order,
-+ 3. in the dependencies of the shared libraries specified on the link
-+ command line,
-+ 4. in the dlopen()ed shared libraries, in the order in which they were
-+ dlopen()ed.
-+ The definition in the C library would override the one in libintl.so if
-+ either
-+ * -lc is given on the link command line and -lintl isn't, or
-+ * -lc is given on the link command line before -lintl, or
-+ * libintl.so is a dependency of a dlopen()ed shared library but not
-+ linked to the executable at link time.
-+ Since Solaris gettext() behaves differently than GNU gettext(), this
-+ would be unacceptable.
-+
-+ The redirection happens by default through macros in C, so that &gettext
-+ is independent of the compilation unit, but through inline functions in
-+ C++, in order not to interfere with the name mangling of class fields or
-+ class methods called 'gettext'. */
-+
-+/* The user can define _INTL_REDIRECT_INLINE or _INTL_REDIRECT_MACROS.
-+ If he doesn't, we choose the method. A third possible method is
-+ _INTL_REDIRECT_ASM, supported only by GCC. */
-+#if !(defined _INTL_REDIRECT_INLINE || defined _INTL_REDIRECT_MACROS)
-+# if __GNUC__ >= 2 && !defined __APPLE_CC__ && !defined __MINGW32__ && !(__GNUC__ == 2 && defined _AIX) && (defined __STDC__ || defined __cplusplus)
-+# define _INTL_REDIRECT_ASM
-+# else
-+# ifdef __cplusplus
-+# define _INTL_REDIRECT_INLINE
-+# else
-+# define _INTL_REDIRECT_MACROS
-+# endif
-+# endif
-+#endif
-+/* Auxiliary macros. */
-+#ifdef _INTL_REDIRECT_ASM
-+# define _INTL_ASM(cname) __asm__ (_INTL_ASMNAME (__USER_LABEL_PREFIX__, #cname))
-+# define _INTL_ASMNAME(prefix,cnamestring) _INTL_STRINGIFY (prefix) cnamestring
-+# define _INTL_STRINGIFY(prefix) #prefix
-+#else
-+# define _INTL_ASM(cname)
-+#endif
-+
-+/* Look up MSGID in the current default message catalog for the current
-+ LC_MESSAGES locale. If not found, returns MSGID itself (the default
-+ text). */
-+#ifdef _INTL_REDIRECT_INLINE
-+extern char *libintl_gettext (const char *__msgid);
-+static inline char *gettext (const char *__msgid)
-+{
-+ return libintl_gettext (__msgid);
-+}
-+#else
-+#ifdef _INTL_REDIRECT_MACROS
-+# define gettext libintl_gettext
-+#endif
-+extern char *gettext (const char *__msgid)
-+ _INTL_ASM (libintl_gettext);
-+#endif
-+
-+/* Look up MSGID in the DOMAINNAME message catalog for the current
-+ LC_MESSAGES locale. */
-+#ifdef _INTL_REDIRECT_INLINE
-+extern char *libintl_dgettext (const char *__domainname, const char *__msgid);
-+static inline char *dgettext (const char *__domainname, const char *__msgid)
-+{
-+ return libintl_dgettext (__domainname, __msgid);
-+}
-+#else
-+#ifdef _INTL_REDIRECT_MACROS
-+# define dgettext libintl_dgettext
-+#endif
-+extern char *dgettext (const char *__domainname, const char *__msgid)
-+ _INTL_ASM (libintl_dgettext);
-+#endif
-+
-+/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
-+ locale. */
-+#ifdef _INTL_REDIRECT_INLINE
-+extern char *libintl_dcgettext (const char *__domainname, const char *__msgid,
-+ int __category);
-+static inline char *dcgettext (const char *__domainname, const char *__msgid,
-+ int __category)
-+{
-+ return libintl_dcgettext (__domainname, __msgid, __category);
-+}
-+#else
-+#ifdef _INTL_REDIRECT_MACROS
-+# define dcgettext libintl_dcgettext
-+#endif
-+extern char *dcgettext (const char *__domainname, const char *__msgid,
-+ int __category)
-+ _INTL_ASM (libintl_dcgettext);
-+#endif
-+
-+
-+/* Similar to `gettext' but select the plural form corresponding to the
-+ number N. */
-+#ifdef _INTL_REDIRECT_INLINE
-+extern char *libintl_ngettext (const char *__msgid1, const char *__msgid2,
-+ unsigned long int __n);
-+static inline char *ngettext (const char *__msgid1, const char *__msgid2,
-+ unsigned long int __n)
-+{
-+ return libintl_ngettext (__msgid1, __msgid2, __n);
-+}
-+#else
-+#ifdef _INTL_REDIRECT_MACROS
-+# define ngettext libintl_ngettext
-+#endif
-+extern char *ngettext (const char *__msgid1, const char *__msgid2,
-+ unsigned long int __n)
-+ _INTL_ASM (libintl_ngettext);
-+#endif
-+
-+/* Similar to `dgettext' but select the plural form corresponding to the
-+ number N. */
-+#ifdef _INTL_REDIRECT_INLINE
-+extern char *libintl_dngettext (const char *__domainname, const char *__msgid1,
-+ const char *__msgid2, unsigned long int __n);
-+static inline char *dngettext (const char *__domainname, const char *__msgid1,
-+ const char *__msgid2, unsigned long int __n)
-+{
-+ return libintl_dngettext (__domainname, __msgid1, __msgid2, __n);
-+}
-+#else
-+#ifdef _INTL_REDIRECT_MACROS
-+# define dngettext libintl_dngettext
-+#endif
-+extern char *dngettext (const char *__domainname,
-+ const char *__msgid1, const char *__msgid2,
-+ unsigned long int __n)
-+ _INTL_ASM (libintl_dngettext);
-+#endif
-+
-+/* Similar to `dcgettext' but select the plural form corresponding to the
-+ number N. */
-+#ifdef _INTL_REDIRECT_INLINE
-+extern char *libintl_dcngettext (const char *__domainname,
-+ const char *__msgid1, const char *__msgid2,
-+ unsigned long int __n, int __category);
-+static inline char *dcngettext (const char *__domainname,
-+ const char *__msgid1, const char *__msgid2,
-+ unsigned long int __n, int __category)
-+{
-+ return libintl_dcngettext (__domainname, __msgid1, __msgid2, __n, __category);
-+}
-+#else
-+#ifdef _INTL_REDIRECT_MACROS
-+# define dcngettext libintl_dcngettext
-+#endif
-+extern char *dcngettext (const char *__domainname,
-+ const char *__msgid1, const char *__msgid2,
-+ unsigned long int __n, int __category)
-+ _INTL_ASM (libintl_dcngettext);
-+#endif
-+
-+
-+/* Set the current default message catalog to DOMAINNAME.
-+ If DOMAINNAME is null, return the current default.
-+ If DOMAINNAME is "", reset to the default of "messages". */
-+#ifdef _INTL_REDIRECT_INLINE
-+extern char *libintl_textdomain (const char *__domainname);
-+static inline char *textdomain (const char *__domainname)
-+{
-+ return libintl_textdomain (__domainname);
-+}
-+#else
-+#ifdef _INTL_REDIRECT_MACROS
-+# define textdomain libintl_textdomain
-+#endif
-+extern char *textdomain (const char *__domainname)
-+ _INTL_ASM (libintl_textdomain);
-+#endif
-+
-+/* Specify that the DOMAINNAME message catalog will be found
-+ in DIRNAME rather than in the system locale data base. */
-+#ifdef _INTL_REDIRECT_INLINE
-+extern char *libintl_bindtextdomain (const char *__domainname,
-+ const char *__dirname);
-+static inline char *bindtextdomain (const char *__domainname,
-+ const char *__dirname)
-+{
-+ return libintl_bindtextdomain (__domainname, __dirname);
-+}
-+#else
-+#ifdef _INTL_REDIRECT_MACROS
-+# define bindtextdomain libintl_bindtextdomain
-+#endif
-+extern char *bindtextdomain (const char *__domainname, const char *__dirname)
-+ _INTL_ASM (libintl_bindtextdomain);
-+#endif
-+
-+/* Specify the character encoding in which the messages from the
-+ DOMAINNAME message catalog will be returned. */
-+#ifdef _INTL_REDIRECT_INLINE
-+extern char *libintl_bind_textdomain_codeset (const char *__domainname,
-+ const char *__codeset);
-+static inline char *bind_textdomain_codeset (const char *__domainname,
-+ const char *__codeset)
-+{
-+ return libintl_bind_textdomain_codeset (__domainname, __codeset);
-+}
-+#else
-+#ifdef _INTL_REDIRECT_MACROS
-+# define bind_textdomain_codeset libintl_bind_textdomain_codeset
-+#endif
-+extern char *bind_textdomain_codeset (const char *__domainname,
-+ const char *__codeset)
-+ _INTL_ASM (libintl_bind_textdomain_codeset);
-+#endif
-+
-+
-+/* Support for format strings with positions in *printf(), following the
-+ POSIX/XSI specification.
-+ Note: These replacements for the *printf() functions are visible only
-+ in source files that #include <libintl.h> or #include "gettext.h".
-+ Packages that use *printf() in source files that don't refer to _()
-+ or gettext() but for which the format string could be the return value
-+ of _() or gettext() need to add this #include. Oh well. */
-+
-+#if !@HAVE_POSIX_PRINTF@
-+
-+#include <stdio.h>
-+#include <stddef.h>
-+
-+/* Get va_list. */
-+#if __STDC__ || defined __cplusplus || defined _MSC_VER
-+# include <stdarg.h>
-+#else
-+# include <varargs.h>
-+#endif
-+
-+#undef fprintf
-+#define fprintf libintl_fprintf
-+extern int fprintf (FILE *, const char *, ...);
-+#undef vfprintf
-+#define vfprintf libintl_vfprintf
-+extern int vfprintf (FILE *, const char *, va_list);
-+
-+#undef printf
-+#define printf libintl_printf
-+extern int printf (const char *, ...);
-+#undef vprintf
-+#define vprintf libintl_vprintf
-+extern int vprintf (const char *, va_list);
-+
-+#undef sprintf
-+#define sprintf libintl_sprintf
-+extern int sprintf (char *, const char *, ...);
-+#undef vsprintf
-+#define vsprintf libintl_vsprintf
-+extern int vsprintf (char *, const char *, va_list);
-+
-+#if @HAVE_SNPRINTF@
-+
-+#undef snprintf
-+#define snprintf libintl_snprintf
-+extern int snprintf (char *, size_t, const char *, ...);
-+#undef vsnprintf
-+#define vsnprintf libintl_vsnprintf
-+extern int vsnprintf (char *, size_t, const char *, va_list);
-+
-+#endif
-+
-+#if @HAVE_ASPRINTF@
-+
-+#undef asprintf
-+#define asprintf libintl_asprintf
-+extern int asprintf (char **, const char *, ...);
-+#undef vasprintf
-+#define vasprintf libintl_vasprintf
-+extern int vasprintf (char **, const char *, va_list);
-+
-+#endif
-+
-+#if @HAVE_WPRINTF@
-+
-+#undef fwprintf
-+#define fwprintf libintl_fwprintf
-+extern int fwprintf (FILE *, const wchar_t *, ...);
-+#undef vfwprintf
-+#define vfwprintf libintl_vfwprintf
-+extern int vfwprintf (FILE *, const wchar_t *, va_list);
-+
-+#undef wprintf
-+#define wprintf libintl_wprintf
-+extern int wprintf (const wchar_t *, ...);
-+#undef vwprintf
-+#define vwprintf libintl_vwprintf
-+extern int vwprintf (const wchar_t *, va_list);
-+
-+#undef swprintf
-+#define swprintf libintl_swprintf
-+extern int swprintf (wchar_t *, size_t, const wchar_t *, ...);
-+#undef vswprintf
-+#define vswprintf libintl_vswprintf
-+extern int vswprintf (wchar_t *, size_t, const wchar_t *, va_list);
-+
-+#endif
-+
-+#endif
-+
-+
-+/* Support for relocatable packages. */
-+
-+/* Sets the original and the current installation prefix of the package.
-+ Relocation simply replaces a pathname starting with the original prefix
-+ by the corresponding pathname with the current prefix instead. Both
-+ prefixes should be directory names without trailing slash (i.e. use ""
-+ instead of "/"). */
-+#define libintl_set_relocation_prefix libintl_set_relocation_prefix
-+extern void
-+ libintl_set_relocation_prefix (const char *orig_prefix,
-+ const char *curr_prefix);
-+
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* libintl.h */
---- lrzsz-0.12.20.safe/intl/linux-msg.sed 1998-04-26 09:20:52.000000000 -0400
-+++ lrzsz-0.12.20/intl/linux-msg.sed 1969-12-31 19:00:00.000000000 -0500
-@@ -1,100 +0,0 @@
--# po2msg.sed - Convert Uniforum style .po file to Linux style .msg file
--# Copyright (C) 1995 Free Software Foundation, Inc.
--# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
--#
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--#
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--#
--#
--# The first directive in the .msg should be the definition of the
--# message set number. We use always set number 1.
--#
--1 {
-- i\
--$set 1 # Automatically created by po2msg.sed
-- h
-- s/.*/0/
-- x
--}
--#
--# Mitch's old catalog format does not allow comments.
--#
--# We copy the original message as a comment into the .msg file.
--#
--/^msgid/ {
-- s/msgid[ ]*"//
--#
--# This does not work now with the new format.
--# /"$/! {
--# s/\\$//
--# s/$/ ... (more lines following)"/
--# }
-- x
--# The following nice solution is by
--# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
-- td
--# Increment a decimal number in pattern space.
--# First hide trailing `9' digits.
-- :d
-- s/9\(_*\)$/_\1/
-- td
--# Assure at least one digit is available.
-- s/^\(_*\)$/0\1/
--# Increment the last digit.
-- s/8\(_*\)$/9\1/
-- s/7\(_*\)$/8\1/
-- s/6\(_*\)$/7\1/
-- s/5\(_*\)$/6\1/
-- s/4\(_*\)$/5\1/
-- s/3\(_*\)$/4\1/
-- s/2\(_*\)$/3\1/
-- s/1\(_*\)$/2\1/
-- s/0\(_*\)$/1\1/
--# Convert the hidden `9' digits to `0's.
-- s/_/0/g
-- x
-- G
-- s/\(.*\)"\n\([0-9]*\)/$ #\2 Original Message:(\1)/p
--}
--#
--# The .msg file contains, other then the .po file, only the translations
--# but each given a unique ID. Starting from 1 and incrementing by 1 for
--# each message we assign them to the messages.
--# It is important that the .po file used to generate the cat-id-tbl.c file
--# (with po-to-tbl) is the same as the one used here. (At least the order
--# of declarations must not be changed.)
--#
--/^msgstr/ {
-- s/msgstr[ ]*"\(.*\)"/# \1/
--# Clear substitution flag.
-- tb
--# Append the next line.
-- :b
-- N
--# Look whether second part is continuation line.
-- s/\(.*\n\)"\(.*\)"/\1\2/
--# Yes, then branch.
-- ta
-- P
-- D
--# Note that D includes a jump to the start!!
--# We found a continuation line. But before printing insert '\'.
-- :a
-- s/\(.*\)\(\n.*\)/\1\\\2/
-- P
--# We cannot use D here.
-- s/.*\n\(.*\)/\1/
-- tb
--}
--d
---- lrzsz-0.12.20.safe/intl/loadinfo.h 1998-04-26 09:20:52.000000000 -0400
-+++ lrzsz-0.12.20/intl/loadinfo.h 2004-09-12 14:40:34.468730912 -0400
-@@ -1,9 +1,54 @@
--#ifndef PARAMS
--# if __STDC__
--# define PARAMS(args) args
--# else
--# define PARAMS(args) ()
--# endif
-+/* Copyright (C) 1996-1999, 2000-2003 Free Software Foundation, Inc.
-+ This file is part of the GNU C Library.
-+ Contributed by Ulrich Drepper <drepper@cygnus.com>, 1996.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifndef _LOADINFO_H
-+#define _LOADINFO_H 1
-+
-+/* Declarations of locale dependent catalog lookup functions.
-+ Implemented in
-+
-+ localealias.c Possibly replace a locale name by another.
-+ explodename.c Split a locale name into its various fields.
-+ l10nflist.c Generate a list of filenames of possible message catalogs.
-+ finddomain.c Find and open the relevant message catalogs.
-+
-+ The main function _nl_find_domain() in finddomain.c is declared
-+ in gettextP.h.
-+ */
-+
-+#ifndef internal_function
-+# define internal_function
-+#endif
-+
-+/* Tell the compiler when a conditional or integer expression is
-+ almost always true or almost always false. */
-+#ifndef HAVE_BUILTIN_EXPECT
-+# define __builtin_expect(expr, val) (expr)
-+#endif
-+
-+/* Separator in PATH like lists of pathnames. */
-+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
-+ /* Win32, OS/2, DOS */
-+# define PATH_SEPARATOR ';'
-+#else
-+ /* Unix */
-+# define PATH_SEPARATOR ':'
- #endif
-
- /* Encoding of locale name parts. */
-@@ -32,27 +77,69 @@
- };
-
-
--extern const char *_nl_normalize_codeset PARAMS ((const char *codeset,
-- size_t name_len));
-+/* Normalize codeset name. There is no standard for the codeset
-+ names. Normalization allows the user to use any of the common
-+ names. The return value is dynamically allocated and has to be
-+ freed by the caller. */
-+extern const char *_nl_normalize_codeset (const char *codeset,
-+ size_t name_len);
-
-+/* Lookup a locale dependent file.
-+ *L10NFILE_LIST denotes a pool of lookup results of locale dependent
-+ files of the same kind, sorted in decreasing order of ->filename.
-+ DIRLIST and DIRLIST_LEN are an argz list of directories in which to
-+ look, containing at least one directory (i.e. DIRLIST_LEN > 0).
-+ MASK, LANGUAGE, TERRITORY, CODESET, NORMALIZED_CODESET, MODIFIER,
-+ SPECIAL, SPONSOR, REVISION are the pieces of the locale name, as
-+ produced by _nl_explode_name(). FILENAME is the filename suffix.
-+ The return value is the lookup result, either found in *L10NFILE_LIST,
-+ or - if DO_ALLOCATE is nonzero - freshly allocated, or possibly NULL.
-+ If the return value is non-NULL, it is added to *L10NFILE_LIST, and
-+ its ->next field denotes the chaining inside *L10NFILE_LIST, and
-+ furthermore its ->successor[] field contains a list of other lookup
-+ results from which this lookup result inherits. */
- extern struct loaded_l10nfile *
--_nl_make_l10nflist PARAMS ((struct loaded_l10nfile **l10nfile_list,
-- const char *dirlist, size_t dirlist_len, int mask,
-- const char *language, const char *territory,
-- const char *codeset,
-- const char *normalized_codeset,
-- const char *modifier, const char *special,
-- const char *sponsor, const char *revision,
-- const char *filename, int do_allocate));
-+_nl_make_l10nflist (struct loaded_l10nfile **l10nfile_list,
-+ const char *dirlist, size_t dirlist_len, int mask,
-+ const char *language, const char *territory,
-+ const char *codeset, const char *normalized_codeset,
-+ const char *modifier, const char *special,
-+ const char *sponsor, const char *revision,
-+ const char *filename, int do_allocate);
-
-+/* Lookup the real locale name for a locale alias NAME, or NULL if
-+ NAME is not a locale alias (but possibly a real locale name).
-+ The return value is statically allocated and must not be freed. */
-+extern const char *_nl_expand_alias (const char *name);
-
--extern const char *_nl_expand_alias PARAMS ((const char *name));
-+/* Split a locale name NAME into its pieces: language, modifier,
-+ territory, codeset, special, sponsor, revision.
-+ NAME gets destructively modified: NUL bytes are inserted here and
-+ there. *LANGUAGE gets assigned NAME. Each of *MODIFIER, *TERRITORY,
-+ *CODESET, *SPECIAL, *SPONSOR, *REVISION gets assigned either a
-+ pointer into the old NAME string, or NULL. *NORMALIZED_CODESET
-+ gets assigned the expanded *CODESET, if it is different from *CODESET;
-+ this one is dynamically allocated and has to be freed by the caller.
-+ The return value is a bitmask, where each bit corresponds to one
-+ filled-in value:
-+ XPG_MODIFIER, CEN_AUDIENCE for *MODIFIER,
-+ TERRITORY for *TERRITORY,
-+ XPG_CODESET for *CODESET,
-+ XPG_NORM_CODESET for *NORMALIZED_CODESET,
-+ CEN_SPECIAL for *SPECIAL,
-+ CEN_SPONSOR for *SPONSOR,
-+ CEN_REVISION for *REVISION.
-+ */
-+extern int _nl_explode_name (char *name, const char **language,
-+ const char **modifier, const char **territory,
-+ const char **codeset,
-+ const char **normalized_codeset,
-+ const char **special, const char **sponsor,
-+ const char **revision);
-
--extern int _nl_explode_name PARAMS ((char *name, const char **language,
-- const char **modifier,
-- const char **territory,
-- const char **codeset,
-- const char **normalized_codeset,
-- const char **special,
-- const char **sponsor,
-- const char **revision));
-+/* Split a locale name NAME into a leading language part and all the
-+ rest. Return a pointer to the first character after the language,
-+ i.e. to the first byte of the rest. */
-+extern char *_nl_find_language (const char *name);
-+
-+#endif /* loadinfo.h */
---- lrzsz-0.12.20.safe/intl/loadmsgcat.c 1998-04-26 09:22:37.000000000 -0400
-+++ lrzsz-0.12.20/intl/loadmsgcat.c 2004-09-12 14:40:34.473730152 -0400
-@@ -1,42 +1,455 @@
--/* Load needed message catalogs
-- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-+/* Load needed message catalogs.
-+ Copyright (C) 1995-1999, 2000-2004 Free Software Foundation, Inc.
-
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+/* Tell glibc's <string.h> to provide a prototype for mempcpy().
-+ This must come before <config.h> because <config.h> may include
-+ <features.h>, and once <features.h> has been included, it's too late. */
-+#ifndef _GNU_SOURCE
-+# define _GNU_SOURCE 1
-+#endif
-
- #ifdef HAVE_CONFIG_H
- # include <config.h>
- #endif
-
-+#include <ctype.h>
-+#include <errno.h>
- #include <fcntl.h>
- #include <sys/types.h>
- #include <sys/stat.h>
-
--#if defined STDC_HEADERS || defined _LIBC
--# include <stdlib.h>
-+#ifdef __GNUC__
-+# undef alloca
-+# define alloca __builtin_alloca
-+# define HAVE_ALLOCA 1
-+#else
-+# ifdef _MSC_VER
-+# include <malloc.h>
-+# define alloca _alloca
-+# else
-+# if defined HAVE_ALLOCA_H || defined _LIBC
-+# include <alloca.h>
-+# else
-+# ifdef _AIX
-+ #pragma alloca
-+# else
-+# ifndef alloca
-+char *alloca ();
-+# endif
-+# endif
-+# endif
-+# endif
- #endif
-
-+#include <stdlib.h>
-+#include <string.h>
-+
- #if defined HAVE_UNISTD_H || defined _LIBC
- # include <unistd.h>
- #endif
-
--#if (defined HAVE_MMAP && defined HAVE_MUNMAP) || defined _LIBC
-+#ifdef _LIBC
-+# include <langinfo.h>
-+# include <locale.h>
-+#endif
-+
-+#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
-+ || (defined _LIBC && defined _POSIX_MAPPED_FILES)
- # include <sys/mman.h>
-+# undef HAVE_MMAP
-+# define HAVE_MMAP 1
-+#else
-+# undef HAVE_MMAP
- #endif
-
--#include "gettext.h"
-+#if defined HAVE_STDINT_H_WITH_UINTMAX || defined _LIBC
-+# include <stdint.h>
-+#endif
-+#if defined HAVE_INTTYPES_H || defined _LIBC
-+# include <inttypes.h>
-+#endif
-+
-+#include "gmo.h"
- #include "gettextP.h"
-+#include "hash-string.h"
-+#include "plural-exp.h"
-+
-+#ifdef _LIBC
-+# include "../locale/localeinfo.h"
-+#endif
-+
-+/* Provide fallback values for macros that ought to be defined in <inttypes.h>.
-+ Note that our fallback values need not be literal strings, because we don't
-+ use them with preprocessor string concatenation. */
-+#if !defined PRId8 || PRI_MACROS_BROKEN
-+# undef PRId8
-+# define PRId8 "d"
-+#endif
-+#if !defined PRIi8 || PRI_MACROS_BROKEN
-+# undef PRIi8
-+# define PRIi8 "i"
-+#endif
-+#if !defined PRIo8 || PRI_MACROS_BROKEN
-+# undef PRIo8
-+# define PRIo8 "o"
-+#endif
-+#if !defined PRIu8 || PRI_MACROS_BROKEN
-+# undef PRIu8
-+# define PRIu8 "u"
-+#endif
-+#if !defined PRIx8 || PRI_MACROS_BROKEN
-+# undef PRIx8
-+# define PRIx8 "x"
-+#endif
-+#if !defined PRIX8 || PRI_MACROS_BROKEN
-+# undef PRIX8
-+# define PRIX8 "X"
-+#endif
-+#if !defined PRId16 || PRI_MACROS_BROKEN
-+# undef PRId16
-+# define PRId16 "d"
-+#endif
-+#if !defined PRIi16 || PRI_MACROS_BROKEN
-+# undef PRIi16
-+# define PRIi16 "i"
-+#endif
-+#if !defined PRIo16 || PRI_MACROS_BROKEN
-+# undef PRIo16
-+# define PRIo16 "o"
-+#endif
-+#if !defined PRIu16 || PRI_MACROS_BROKEN
-+# undef PRIu16
-+# define PRIu16 "u"
-+#endif
-+#if !defined PRIx16 || PRI_MACROS_BROKEN
-+# undef PRIx16
-+# define PRIx16 "x"
-+#endif
-+#if !defined PRIX16 || PRI_MACROS_BROKEN
-+# undef PRIX16
-+# define PRIX16 "X"
-+#endif
-+#if !defined PRId32 || PRI_MACROS_BROKEN
-+# undef PRId32
-+# define PRId32 "d"
-+#endif
-+#if !defined PRIi32 || PRI_MACROS_BROKEN
-+# undef PRIi32
-+# define PRIi32 "i"
-+#endif
-+#if !defined PRIo32 || PRI_MACROS_BROKEN
-+# undef PRIo32
-+# define PRIo32 "o"
-+#endif
-+#if !defined PRIu32 || PRI_MACROS_BROKEN
-+# undef PRIu32
-+# define PRIu32 "u"
-+#endif
-+#if !defined PRIx32 || PRI_MACROS_BROKEN
-+# undef PRIx32
-+# define PRIx32 "x"
-+#endif
-+#if !defined PRIX32 || PRI_MACROS_BROKEN
-+# undef PRIX32
-+# define PRIX32 "X"
-+#endif
-+#if !defined PRId64 || PRI_MACROS_BROKEN
-+# undef PRId64
-+# define PRId64 (sizeof (long) == 8 ? "ld" : "lld")
-+#endif
-+#if !defined PRIi64 || PRI_MACROS_BROKEN
-+# undef PRIi64
-+# define PRIi64 (sizeof (long) == 8 ? "li" : "lli")
-+#endif
-+#if !defined PRIo64 || PRI_MACROS_BROKEN
-+# undef PRIo64
-+# define PRIo64 (sizeof (long) == 8 ? "lo" : "llo")
-+#endif
-+#if !defined PRIu64 || PRI_MACROS_BROKEN
-+# undef PRIu64
-+# define PRIu64 (sizeof (long) == 8 ? "lu" : "llu")
-+#endif
-+#if !defined PRIx64 || PRI_MACROS_BROKEN
-+# undef PRIx64
-+# define PRIx64 (sizeof (long) == 8 ? "lx" : "llx")
-+#endif
-+#if !defined PRIX64 || PRI_MACROS_BROKEN
-+# undef PRIX64
-+# define PRIX64 (sizeof (long) == 8 ? "lX" : "llX")
-+#endif
-+#if !defined PRIdLEAST8 || PRI_MACROS_BROKEN
-+# undef PRIdLEAST8
-+# define PRIdLEAST8 "d"
-+#endif
-+#if !defined PRIiLEAST8 || PRI_MACROS_BROKEN
-+# undef PRIiLEAST8
-+# define PRIiLEAST8 "i"
-+#endif
-+#if !defined PRIoLEAST8 || PRI_MACROS_BROKEN
-+# undef PRIoLEAST8
-+# define PRIoLEAST8 "o"
-+#endif
-+#if !defined PRIuLEAST8 || PRI_MACROS_BROKEN
-+# undef PRIuLEAST8
-+# define PRIuLEAST8 "u"
-+#endif
-+#if !defined PRIxLEAST8 || PRI_MACROS_BROKEN
-+# undef PRIxLEAST8
-+# define PRIxLEAST8 "x"
-+#endif
-+#if !defined PRIXLEAST8 || PRI_MACROS_BROKEN
-+# undef PRIXLEAST8
-+# define PRIXLEAST8 "X"
-+#endif
-+#if !defined PRIdLEAST16 || PRI_MACROS_BROKEN
-+# undef PRIdLEAST16
-+# define PRIdLEAST16 "d"
-+#endif
-+#if !defined PRIiLEAST16 || PRI_MACROS_BROKEN
-+# undef PRIiLEAST16
-+# define PRIiLEAST16 "i"
-+#endif
-+#if !defined PRIoLEAST16 || PRI_MACROS_BROKEN
-+# undef PRIoLEAST16
-+# define PRIoLEAST16 "o"
-+#endif
-+#if !defined PRIuLEAST16 || PRI_MACROS_BROKEN
-+# undef PRIuLEAST16
-+# define PRIuLEAST16 "u"
-+#endif
-+#if !defined PRIxLEAST16 || PRI_MACROS_BROKEN
-+# undef PRIxLEAST16
-+# define PRIxLEAST16 "x"
-+#endif
-+#if !defined PRIXLEAST16 || PRI_MACROS_BROKEN
-+# undef PRIXLEAST16
-+# define PRIXLEAST16 "X"
-+#endif
-+#if !defined PRIdLEAST32 || PRI_MACROS_BROKEN
-+# undef PRIdLEAST32
-+# define PRIdLEAST32 "d"
-+#endif
-+#if !defined PRIiLEAST32 || PRI_MACROS_BROKEN
-+# undef PRIiLEAST32
-+# define PRIiLEAST32 "i"
-+#endif
-+#if !defined PRIoLEAST32 || PRI_MACROS_BROKEN
-+# undef PRIoLEAST32
-+# define PRIoLEAST32 "o"
-+#endif
-+#if !defined PRIuLEAST32 || PRI_MACROS_BROKEN
-+# undef PRIuLEAST32
-+# define PRIuLEAST32 "u"
-+#endif
-+#if !defined PRIxLEAST32 || PRI_MACROS_BROKEN
-+# undef PRIxLEAST32
-+# define PRIxLEAST32 "x"
-+#endif
-+#if !defined PRIXLEAST32 || PRI_MACROS_BROKEN
-+# undef PRIXLEAST32
-+# define PRIXLEAST32 "X"
-+#endif
-+#if !defined PRIdLEAST64 || PRI_MACROS_BROKEN
-+# undef PRIdLEAST64
-+# define PRIdLEAST64 PRId64
-+#endif
-+#if !defined PRIiLEAST64 || PRI_MACROS_BROKEN
-+# undef PRIiLEAST64
-+# define PRIiLEAST64 PRIi64
-+#endif
-+#if !defined PRIoLEAST64 || PRI_MACROS_BROKEN
-+# undef PRIoLEAST64
-+# define PRIoLEAST64 PRIo64
-+#endif
-+#if !defined PRIuLEAST64 || PRI_MACROS_BROKEN
-+# undef PRIuLEAST64
-+# define PRIuLEAST64 PRIu64
-+#endif
-+#if !defined PRIxLEAST64 || PRI_MACROS_BROKEN
-+# undef PRIxLEAST64
-+# define PRIxLEAST64 PRIx64
-+#endif
-+#if !defined PRIXLEAST64 || PRI_MACROS_BROKEN
-+# undef PRIXLEAST64
-+# define PRIXLEAST64 PRIX64
-+#endif
-+#if !defined PRIdFAST8 || PRI_MACROS_BROKEN
-+# undef PRIdFAST8
-+# define PRIdFAST8 "d"
-+#endif
-+#if !defined PRIiFAST8 || PRI_MACROS_BROKEN
-+# undef PRIiFAST8
-+# define PRIiFAST8 "i"
-+#endif
-+#if !defined PRIoFAST8 || PRI_MACROS_BROKEN
-+# undef PRIoFAST8
-+# define PRIoFAST8 "o"
-+#endif
-+#if !defined PRIuFAST8 || PRI_MACROS_BROKEN
-+# undef PRIuFAST8
-+# define PRIuFAST8 "u"
-+#endif
-+#if !defined PRIxFAST8 || PRI_MACROS_BROKEN
-+# undef PRIxFAST8
-+# define PRIxFAST8 "x"
-+#endif
-+#if !defined PRIXFAST8 || PRI_MACROS_BROKEN
-+# undef PRIXFAST8
-+# define PRIXFAST8 "X"
-+#endif
-+#if !defined PRIdFAST16 || PRI_MACROS_BROKEN
-+# undef PRIdFAST16
-+# define PRIdFAST16 "d"
-+#endif
-+#if !defined PRIiFAST16 || PRI_MACROS_BROKEN
-+# undef PRIiFAST16
-+# define PRIiFAST16 "i"
-+#endif
-+#if !defined PRIoFAST16 || PRI_MACROS_BROKEN
-+# undef PRIoFAST16
-+# define PRIoFAST16 "o"
-+#endif
-+#if !defined PRIuFAST16 || PRI_MACROS_BROKEN
-+# undef PRIuFAST16
-+# define PRIuFAST16 "u"
-+#endif
-+#if !defined PRIxFAST16 || PRI_MACROS_BROKEN
-+# undef PRIxFAST16
-+# define PRIxFAST16 "x"
-+#endif
-+#if !defined PRIXFAST16 || PRI_MACROS_BROKEN
-+# undef PRIXFAST16
-+# define PRIXFAST16 "X"
-+#endif
-+#if !defined PRIdFAST32 || PRI_MACROS_BROKEN
-+# undef PRIdFAST32
-+# define PRIdFAST32 "d"
-+#endif
-+#if !defined PRIiFAST32 || PRI_MACROS_BROKEN
-+# undef PRIiFAST32
-+# define PRIiFAST32 "i"
-+#endif
-+#if !defined PRIoFAST32 || PRI_MACROS_BROKEN
-+# undef PRIoFAST32
-+# define PRIoFAST32 "o"
-+#endif
-+#if !defined PRIuFAST32 || PRI_MACROS_BROKEN
-+# undef PRIuFAST32
-+# define PRIuFAST32 "u"
-+#endif
-+#if !defined PRIxFAST32 || PRI_MACROS_BROKEN
-+# undef PRIxFAST32
-+# define PRIxFAST32 "x"
-+#endif
-+#if !defined PRIXFAST32 || PRI_MACROS_BROKEN
-+# undef PRIXFAST32
-+# define PRIXFAST32 "X"
-+#endif
-+#if !defined PRIdFAST64 || PRI_MACROS_BROKEN
-+# undef PRIdFAST64
-+# define PRIdFAST64 PRId64
-+#endif
-+#if !defined PRIiFAST64 || PRI_MACROS_BROKEN
-+# undef PRIiFAST64
-+# define PRIiFAST64 PRIi64
-+#endif
-+#if !defined PRIoFAST64 || PRI_MACROS_BROKEN
-+# undef PRIoFAST64
-+# define PRIoFAST64 PRIo64
-+#endif
-+#if !defined PRIuFAST64 || PRI_MACROS_BROKEN
-+# undef PRIuFAST64
-+# define PRIuFAST64 PRIu64
-+#endif
-+#if !defined PRIxFAST64 || PRI_MACROS_BROKEN
-+# undef PRIxFAST64
-+# define PRIxFAST64 PRIx64
-+#endif
-+#if !defined PRIXFAST64 || PRI_MACROS_BROKEN
-+# undef PRIXFAST64
-+# define PRIXFAST64 PRIX64
-+#endif
-+#if !defined PRIdMAX || PRI_MACROS_BROKEN
-+# undef PRIdMAX
-+# define PRIdMAX (sizeof (uintmax_t) == sizeof (long) ? "ld" : "lld")
-+#endif
-+#if !defined PRIiMAX || PRI_MACROS_BROKEN
-+# undef PRIiMAX
-+# define PRIiMAX (sizeof (uintmax_t) == sizeof (long) ? "li" : "lli")
-+#endif
-+#if !defined PRIoMAX || PRI_MACROS_BROKEN
-+# undef PRIoMAX
-+# define PRIoMAX (sizeof (uintmax_t) == sizeof (long) ? "lo" : "llo")
-+#endif
-+#if !defined PRIuMAX || PRI_MACROS_BROKEN
-+# undef PRIuMAX
-+# define PRIuMAX (sizeof (uintmax_t) == sizeof (long) ? "lu" : "llu")
-+#endif
-+#if !defined PRIxMAX || PRI_MACROS_BROKEN
-+# undef PRIxMAX
-+# define PRIxMAX (sizeof (uintmax_t) == sizeof (long) ? "lx" : "llx")
-+#endif
-+#if !defined PRIXMAX || PRI_MACROS_BROKEN
-+# undef PRIXMAX
-+# define PRIXMAX (sizeof (uintmax_t) == sizeof (long) ? "lX" : "llX")
-+#endif
-+#if !defined PRIdPTR || PRI_MACROS_BROKEN
-+# undef PRIdPTR
-+# define PRIdPTR \
-+ (sizeof (void *) == sizeof (long) ? "ld" : \
-+ sizeof (void *) == sizeof (int) ? "d" : \
-+ "lld")
-+#endif
-+#if !defined PRIiPTR || PRI_MACROS_BROKEN
-+# undef PRIiPTR
-+# define PRIiPTR \
-+ (sizeof (void *) == sizeof (long) ? "li" : \
-+ sizeof (void *) == sizeof (int) ? "i" : \
-+ "lli")
-+#endif
-+#if !defined PRIoPTR || PRI_MACROS_BROKEN
-+# undef PRIoPTR
-+# define PRIoPTR \
-+ (sizeof (void *) == sizeof (long) ? "lo" : \
-+ sizeof (void *) == sizeof (int) ? "o" : \
-+ "llo")
-+#endif
-+#if !defined PRIuPTR || PRI_MACROS_BROKEN
-+# undef PRIuPTR
-+# define PRIuPTR \
-+ (sizeof (void *) == sizeof (long) ? "lu" : \
-+ sizeof (void *) == sizeof (int) ? "u" : \
-+ "llu")
-+#endif
-+#if !defined PRIxPTR || PRI_MACROS_BROKEN
-+# undef PRIxPTR
-+# define PRIxPTR \
-+ (sizeof (void *) == sizeof (long) ? "lx" : \
-+ sizeof (void *) == sizeof (int) ? "x" : \
-+ "llx")
-+#endif
-+#if !defined PRIXPTR || PRI_MACROS_BROKEN
-+# undef PRIXPTR
-+# define PRIXPTR \
-+ (sizeof (void *) == sizeof (long) ? "lX" : \
-+ sizeof (void *) == sizeof (int) ? "X" : \
-+ "llX")
-+#endif
-
- /* @@ end of prolog @@ */
-
-@@ -44,7 +457,6 @@
- /* Rename the non ISO C functions. This is required by the standard
- because some ISO C functions will require linking with this object
- file and the name space must not be polluted. */
--# define fstat __fstat
- # define open __open
- # define close __close
- # define read __read
-@@ -52,30 +464,471 @@
- # define munmap __munmap
- #endif
-
-+/* For those losing systems which don't have `alloca' we have to add
-+ some additional code emulating it. */
-+#ifdef HAVE_ALLOCA
-+# define freea(p) /* nothing */
-+#else
-+# define alloca(n) malloc (n)
-+# define freea(p) free (p)
-+#endif
-+
-+/* For systems that distinguish between text and binary I/O.
-+ O_BINARY is usually declared in <fcntl.h>. */
-+#if !defined O_BINARY && defined _O_BINARY
-+ /* For MSC-compatible compilers. */
-+# define O_BINARY _O_BINARY
-+# define O_TEXT _O_TEXT
-+#endif
-+#ifdef __BEOS__
-+ /* BeOS 5 has O_BINARY and O_TEXT, but they have no effect. */
-+# undef O_BINARY
-+# undef O_TEXT
-+#endif
-+/* On reasonable systems, binary I/O is the default. */
-+#ifndef O_BINARY
-+# define O_BINARY 0
-+#endif
-+
-+
- /* We need a sign, whether a new catalog was loaded, which can be associated
- with all translations. This is important if the translations are
- cached by one of GCC's features. */
--int _nl_msg_cat_cntr = 0;
-+int _nl_msg_cat_cntr;
-
-
-+/* Expand a system dependent string segment. Return NULL if unsupported. */
-+static const char *
-+get_sysdep_segment_value (const char *name)
-+{
-+ /* Test for an ISO C 99 section 7.8.1 format string directive.
-+ Syntax:
-+ P R I { d | i | o | u | x | X }
-+ { { | LEAST | FAST } { 8 | 16 | 32 | 64 } | MAX | PTR } */
-+ /* We don't use a table of 14 times 6 'const char *' strings here, because
-+ data relocations cost startup time. */
-+ if (name[0] == 'P' && name[1] == 'R' && name[2] == 'I')
-+ {
-+ if (name[3] == 'd' || name[3] == 'i' || name[3] == 'o' || name[3] == 'u'
-+ || name[3] == 'x' || name[3] == 'X')
-+ {
-+ if (name[4] == '8' && name[5] == '\0')
-+ {
-+ if (name[3] == 'd')
-+ return PRId8;
-+ if (name[3] == 'i')
-+ return PRIi8;
-+ if (name[3] == 'o')
-+ return PRIo8;
-+ if (name[3] == 'u')
-+ return PRIu8;
-+ if (name[3] == 'x')
-+ return PRIx8;
-+ if (name[3] == 'X')
-+ return PRIX8;
-+ abort ();
-+ }
-+ if (name[4] == '1' && name[5] == '6' && name[6] == '\0')
-+ {
-+ if (name[3] == 'd')
-+ return PRId16;
-+ if (name[3] == 'i')
-+ return PRIi16;
-+ if (name[3] == 'o')
-+ return PRIo16;
-+ if (name[3] == 'u')
-+ return PRIu16;
-+ if (name[3] == 'x')
-+ return PRIx16;
-+ if (name[3] == 'X')
-+ return PRIX16;
-+ abort ();
-+ }
-+ if (name[4] == '3' && name[5] == '2' && name[6] == '\0')
-+ {
-+ if (name[3] == 'd')
-+ return PRId32;
-+ if (name[3] == 'i')
-+ return PRIi32;
-+ if (name[3] == 'o')
-+ return PRIo32;
-+ if (name[3] == 'u')
-+ return PRIu32;
-+ if (name[3] == 'x')
-+ return PRIx32;
-+ if (name[3] == 'X')
-+ return PRIX32;
-+ abort ();
-+ }
-+ if (name[4] == '6' && name[5] == '4' && name[6] == '\0')
-+ {
-+ if (name[3] == 'd')
-+ return PRId64;
-+ if (name[3] == 'i')
-+ return PRIi64;
-+ if (name[3] == 'o')
-+ return PRIo64;
-+ if (name[3] == 'u')
-+ return PRIu64;
-+ if (name[3] == 'x')
-+ return PRIx64;
-+ if (name[3] == 'X')
-+ return PRIX64;
-+ abort ();
-+ }
-+ if (name[4] == 'L' && name[5] == 'E' && name[6] == 'A'
-+ && name[7] == 'S' && name[8] == 'T')
-+ {
-+ if (name[9] == '8' && name[10] == '\0')
-+ {
-+ if (name[3] == 'd')
-+ return PRIdLEAST8;
-+ if (name[3] == 'i')
-+ return PRIiLEAST8;
-+ if (name[3] == 'o')
-+ return PRIoLEAST8;
-+ if (name[3] == 'u')
-+ return PRIuLEAST8;
-+ if (name[3] == 'x')
-+ return PRIxLEAST8;
-+ if (name[3] == 'X')
-+ return PRIXLEAST8;
-+ abort ();
-+ }
-+ if (name[9] == '1' && name[10] == '6' && name[11] == '\0')
-+ {
-+ if (name[3] == 'd')
-+ return PRIdLEAST16;
-+ if (name[3] == 'i')
-+ return PRIiLEAST16;
-+ if (name[3] == 'o')
-+ return PRIoLEAST16;
-+ if (name[3] == 'u')
-+ return PRIuLEAST16;
-+ if (name[3] == 'x')
-+ return PRIxLEAST16;
-+ if (name[3] == 'X')
-+ return PRIXLEAST16;
-+ abort ();
-+ }
-+ if (name[9] == '3' && name[10] == '2' && name[11] == '\0')
-+ {
-+ if (name[3] == 'd')
-+ return PRIdLEAST32;
-+ if (name[3] == 'i')
-+ return PRIiLEAST32;
-+ if (name[3] == 'o')
-+ return PRIoLEAST32;
-+ if (name[3] == 'u')
-+ return PRIuLEAST32;
-+ if (name[3] == 'x')
-+ return PRIxLEAST32;
-+ if (name[3] == 'X')
-+ return PRIXLEAST32;
-+ abort ();
-+ }
-+ if (name[9] == '6' && name[10] == '4' && name[11] == '\0')
-+ {
-+ if (name[3] == 'd')
-+ return PRIdLEAST64;
-+ if (name[3] == 'i')
-+ return PRIiLEAST64;
-+ if (name[3] == 'o')
-+ return PRIoLEAST64;
-+ if (name[3] == 'u')
-+ return PRIuLEAST64;
-+ if (name[3] == 'x')
-+ return PRIxLEAST64;
-+ if (name[3] == 'X')
-+ return PRIXLEAST64;
-+ abort ();
-+ }
-+ }
-+ if (name[4] == 'F' && name[5] == 'A' && name[6] == 'S'
-+ && name[7] == 'T')
-+ {
-+ if (name[8] == '8' && name[9] == '\0')
-+ {
-+ if (name[3] == 'd')
-+ return PRIdFAST8;
-+ if (name[3] == 'i')
-+ return PRIiFAST8;
-+ if (name[3] == 'o')
-+ return PRIoFAST8;
-+ if (name[3] == 'u')
-+ return PRIuFAST8;
-+ if (name[3] == 'x')
-+ return PRIxFAST8;
-+ if (name[3] == 'X')
-+ return PRIXFAST8;
-+ abort ();
-+ }
-+ if (name[8] == '1' && name[9] == '6' && name[10] == '\0')
-+ {
-+ if (name[3] == 'd')
-+ return PRIdFAST16;
-+ if (name[3] == 'i')
-+ return PRIiFAST16;
-+ if (name[3] == 'o')
-+ return PRIoFAST16;
-+ if (name[3] == 'u')
-+ return PRIuFAST16;
-+ if (name[3] == 'x')
-+ return PRIxFAST16;
-+ if (name[3] == 'X')
-+ return PRIXFAST16;
-+ abort ();
-+ }
-+ if (name[8] == '3' && name[9] == '2' && name[10] == '\0')
-+ {
-+ if (name[3] == 'd')
-+ return PRIdFAST32;
-+ if (name[3] == 'i')
-+ return PRIiFAST32;
-+ if (name[3] == 'o')
-+ return PRIoFAST32;
-+ if (name[3] == 'u')
-+ return PRIuFAST32;
-+ if (name[3] == 'x')
-+ return PRIxFAST32;
-+ if (name[3] == 'X')
-+ return PRIXFAST32;
-+ abort ();
-+ }
-+ if (name[8] == '6' && name[9] == '4' && name[10] == '\0')
-+ {
-+ if (name[3] == 'd')
-+ return PRIdFAST64;
-+ if (name[3] == 'i')
-+ return PRIiFAST64;
-+ if (name[3] == 'o')
-+ return PRIoFAST64;
-+ if (name[3] == 'u')
-+ return PRIuFAST64;
-+ if (name[3] == 'x')
-+ return PRIxFAST64;
-+ if (name[3] == 'X')
-+ return PRIXFAST64;
-+ abort ();
-+ }
-+ }
-+ if (name[4] == 'M' && name[5] == 'A' && name[6] == 'X'
-+ && name[7] == '\0')
-+ {
-+ if (name[3] == 'd')
-+ return PRIdMAX;
-+ if (name[3] == 'i')
-+ return PRIiMAX;
-+ if (name[3] == 'o')
-+ return PRIoMAX;
-+ if (name[3] == 'u')
-+ return PRIuMAX;
-+ if (name[3] == 'x')
-+ return PRIxMAX;
-+ if (name[3] == 'X')
-+ return PRIXMAX;
-+ abort ();
-+ }
-+ if (name[4] == 'P' && name[5] == 'T' && name[6] == 'R'
-+ && name[7] == '\0')
-+ {
-+ if (name[3] == 'd')
-+ return PRIdPTR;
-+ if (name[3] == 'i')
-+ return PRIiPTR;
-+ if (name[3] == 'o')
-+ return PRIoPTR;
-+ if (name[3] == 'u')
-+ return PRIuPTR;
-+ if (name[3] == 'x')
-+ return PRIxPTR;
-+ if (name[3] == 'X')
-+ return PRIXPTR;
-+ abort ();
-+ }
-+ }
-+ }
-+ /* Test for a glibc specific printf() format directive flag. */
-+ if (name[0] == 'I' && name[1] == '\0')
-+ {
-+#if defined _LIBC || __GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 2)
-+ /* The 'I' flag, in numeric format directives, replaces ASCII digits
-+ with the 'outdigits' defined in the LC_CTYPE locale facet. This is
-+ used for Farsi (Persian) and maybe Arabic. */
-+ return "I";
-+#else
-+ return "";
-+#endif
-+ }
-+ /* Other system dependent strings are not valid. */
-+ return NULL;
-+}
-+
-+/* Initialize the codeset dependent parts of an opened message catalog.
-+ Return the header entry. */
-+const char *
-+internal_function
-+_nl_init_domain_conv (struct loaded_l10nfile *domain_file,
-+ struct loaded_domain *domain,
-+ struct binding *domainbinding)
-+{
-+ /* Find out about the character set the file is encoded with.
-+ This can be found (in textual form) in the entry "". If this
-+ entry does not exist or if this does not contain the `charset='
-+ information, we will assume the charset matches the one the
-+ current locale and we don't have to perform any conversion. */
-+ char *nullentry;
-+ size_t nullentrylen;
-+
-+ /* Preinitialize fields, to avoid recursion during _nl_find_msg. */
-+ domain->codeset_cntr =
-+ (domainbinding != NULL ? domainbinding->codeset_cntr : 0);
-+#ifdef _LIBC
-+ domain->conv = (__gconv_t) -1;
-+#else
-+# if HAVE_ICONV
-+ domain->conv = (iconv_t) -1;
-+# endif
-+#endif
-+ domain->conv_tab = NULL;
-+
-+ /* Get the header entry. */
-+ nullentry = _nl_find_msg (domain_file, domainbinding, "", &nullentrylen);
-+
-+ if (nullentry != NULL)
-+ {
-+#if defined _LIBC || HAVE_ICONV
-+ const char *charsetstr;
-+
-+ charsetstr = strstr (nullentry, "charset=");
-+ if (charsetstr != NULL)
-+ {
-+ size_t len;
-+ char *charset;
-+ const char *outcharset;
-+
-+ charsetstr += strlen ("charset=");
-+ len = strcspn (charsetstr, " \t\n");
-+
-+ charset = (char *) alloca (len + 1);
-+# if defined _LIBC || HAVE_MEMPCPY
-+ *((char *) mempcpy (charset, charsetstr, len)) = '\0';
-+# else
-+ memcpy (charset, charsetstr, len);
-+ charset[len] = '\0';
-+# endif
-+
-+ /* The output charset should normally be determined by the
-+ locale. But sometimes the locale is not used or not correctly
-+ set up, so we provide a possibility for the user to override
-+ this. Moreover, the value specified through
-+ bind_textdomain_codeset overrides both. */
-+ if (domainbinding != NULL && domainbinding->codeset != NULL)
-+ outcharset = domainbinding->codeset;
-+ else
-+ {
-+ outcharset = getenv ("OUTPUT_CHARSET");
-+ if (outcharset == NULL || outcharset[0] == '\0')
-+ {
-+# ifdef _LIBC
-+ outcharset = _NL_CURRENT (LC_CTYPE, CODESET);
-+# else
-+# if HAVE_ICONV
-+ extern const char *locale_charset (void);
-+ outcharset = locale_charset ();
-+# endif
-+# endif
-+ }
-+ }
-+
-+# ifdef _LIBC
-+ /* We always want to use transliteration. */
-+ outcharset = norm_add_slashes (outcharset, "TRANSLIT");
-+ charset = norm_add_slashes (charset, NULL);
-+ if (__gconv_open (outcharset, charset, &domain->conv,
-+ GCONV_AVOID_NOCONV)
-+ != __GCONV_OK)
-+ domain->conv = (__gconv_t) -1;
-+# else
-+# if HAVE_ICONV
-+ /* When using GNU libc >= 2.2 or GNU libiconv >= 1.5,
-+ we want to use transliteration. */
-+# if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 2) || __GLIBC__ > 2 \
-+ || _LIBICONV_VERSION >= 0x0105
-+ if (strchr (outcharset, '/') == NULL)
-+ {
-+ char *tmp;
-+
-+ len = strlen (outcharset);
-+ tmp = (char *) alloca (len + 10 + 1);
-+ memcpy (tmp, outcharset, len);
-+ memcpy (tmp + len, "//TRANSLIT", 10 + 1);
-+ outcharset = tmp;
-+
-+ domain->conv = iconv_open (outcharset, charset);
-+
-+ freea (outcharset);
-+ }
-+ else
-+# endif
-+ domain->conv = iconv_open (outcharset, charset);
-+# endif
-+# endif
-+
-+ freea (charset);
-+ }
-+#endif /* _LIBC || HAVE_ICONV */
-+ }
-+
-+ return nullentry;
-+}
-+
-+/* Frees the codeset dependent parts of an opened message catalog. */
-+void
-+internal_function
-+_nl_free_domain_conv (struct loaded_domain *domain)
-+{
-+ if (domain->conv_tab != NULL && domain->conv_tab != (char **) -1)
-+ free (domain->conv_tab);
-+
-+#ifdef _LIBC
-+ if (domain->conv != (__gconv_t) -1)
-+ __gconv_close (domain->conv);
-+#else
-+# if HAVE_ICONV
-+ if (domain->conv != (iconv_t) -1)
-+ iconv_close (domain->conv);
-+# endif
-+#endif
-+}
-+
- /* Load the message catalogs specified by FILENAME. If it is no valid
- message catalog do nothing. */
- void
--_nl_load_domain (domain_file)
-- struct loaded_l10nfile *domain_file;
-+internal_function
-+_nl_load_domain (struct loaded_l10nfile *domain_file,
-+ struct binding *domainbinding)
- {
- int fd;
-+ size_t size;
-+#ifdef _LIBC
-+ struct stat64 st;
-+#else
- struct stat st;
-+#endif
- struct mo_file_header *data = (struct mo_file_header *) -1;
--#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
-- || defined _LIBC
- int use_mmap = 0;
--#endif
- struct loaded_domain *domain;
-+ int revision;
-+ const char *nullentry;
-
- domain_file->decided = 1;
- domain_file->data = NULL;
-
-+ /* Note that it would be useless to store domainbinding in domain_file
-+ because domainbinding might be == NULL now but != NULL later (after
-+ a call to bind_textdomain_codeset). */
-+
- /* If the record does not represent a valid locale the FILENAME
- might be NULL. This can happen when according to the given
- specification the locale file name is different for XPG and CEN
-@@ -84,27 +937,32 @@
- return;
-
- /* Try to open the addressed file. */
-- fd = open (domain_file->filename, O_RDONLY);
-+ fd = open (domain_file->filename, O_RDONLY | O_BINARY);
- if (fd == -1)
- return;
-
- /* We must know about the size of the file. */
-- if (fstat (fd, &st) != 0
-- && st.st_size < (off_t) sizeof (struct mo_file_header))
-+ if (
-+#ifdef _LIBC
-+ __builtin_expect (fstat64 (fd, &st) != 0, 0)
-+#else
-+ __builtin_expect (fstat (fd, &st) != 0, 0)
-+#endif
-+ || __builtin_expect ((size = (size_t) st.st_size) != st.st_size, 0)
-+ || __builtin_expect (size < sizeof (struct mo_file_header), 0))
- {
- /* Something went wrong. */
- close (fd);
- return;
- }
-
--#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
-- || defined _LIBC
-+#ifdef HAVE_MMAP
- /* Now we are ready to load the file. If mmap() is available we try
- this first. If not available or it failed we try to load it. */
-- data = (struct mo_file_header *) mmap (NULL, st.st_size, PROT_READ,
-+ data = (struct mo_file_header *) mmap (NULL, size, PROT_READ,
- MAP_PRIVATE, fd, 0);
-
-- if (data != (struct mo_file_header *) -1)
-+ if (__builtin_expect (data != (struct mo_file_header *) -1, 1))
- {
- /* mmap() call was successful. */
- close (fd);
-@@ -116,24 +974,27 @@
- it manually. */
- if (data == (struct mo_file_header *) -1)
- {
-- off_t to_read;
-+ size_t to_read;
- char *read_ptr;
-
-- data = (struct mo_file_header *) malloc (st.st_size);
-+ data = (struct mo_file_header *) malloc (size);
- if (data == NULL)
- return;
-
-- to_read = st.st_size;
-+ to_read = size;
- read_ptr = (char *) data;
- do
- {
- long int nb = (long int) read (fd, read_ptr, to_read);
-- if (nb == -1)
-+ if (nb <= 0)
- {
-+#ifdef EINTR
-+ if (nb == -1 && errno == EINTR)
-+ continue;
-+#endif
- close (fd);
- return;
- }
--
- read_ptr += nb;
- to_read -= nb;
- }
-@@ -144,47 +1005,378 @@
-
- /* Using the magic number we can test whether it really is a message
- catalog file. */
-- if (data->magic != _MAGIC && data->magic != _MAGIC_SWAPPED)
-+ if (__builtin_expect (data->magic != _MAGIC && data->magic != _MAGIC_SWAPPED,
-+ 0))
- {
- /* The magic number is wrong: not a message catalog file. */
--#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
-- || defined _LIBC
-+#ifdef HAVE_MMAP
- if (use_mmap)
-- munmap ((caddr_t) data, st.st_size);
-+ munmap ((caddr_t) data, size);
- else
- #endif
- free (data);
- return;
- }
-
-- domain_file->data
-- = (struct loaded_domain *) malloc (sizeof (struct loaded_domain));
-- if (domain_file->data == NULL)
-+ domain = (struct loaded_domain *) malloc (sizeof (struct loaded_domain));
-+ if (domain == NULL)
- return;
-+ domain_file->data = domain;
-
-- domain = (struct loaded_domain *) domain_file->data;
- domain->data = (char *) data;
-+ domain->use_mmap = use_mmap;
-+ domain->mmap_size = size;
- domain->must_swap = data->magic != _MAGIC;
-+ domain->malloced = NULL;
-
- /* Fill in the information about the available tables. */
-- switch (W (domain->must_swap, data->revision))
-+ revision = W (domain->must_swap, data->revision);
-+ /* We support only the major revisions 0 and 1. */
-+ switch (revision >> 16)
- {
- case 0:
-+ case 1:
- domain->nstrings = W (domain->must_swap, data->nstrings);
-- domain->orig_tab = (struct string_desc *)
-+ domain->orig_tab = (const struct string_desc *)
- ((char *) data + W (domain->must_swap, data->orig_tab_offset));
-- domain->trans_tab = (struct string_desc *)
-+ domain->trans_tab = (const struct string_desc *)
- ((char *) data + W (domain->must_swap, data->trans_tab_offset));
- domain->hash_size = W (domain->must_swap, data->hash_tab_size);
-- domain->hash_tab = (nls_uint32 *)
-- ((char *) data + W (domain->must_swap, data->hash_tab_offset));
-+ domain->hash_tab =
-+ (domain->hash_size > 2
-+ ? (const nls_uint32 *)
-+ ((char *) data + W (domain->must_swap, data->hash_tab_offset))
-+ : NULL);
-+ domain->must_swap_hash_tab = domain->must_swap;
-+
-+ /* Now dispatch on the minor revision. */
-+ switch (revision & 0xffff)
-+ {
-+ case 0:
-+ domain->n_sysdep_strings = 0;
-+ domain->orig_sysdep_tab = NULL;
-+ domain->trans_sysdep_tab = NULL;
-+ break;
-+ case 1:
-+ default:
-+ {
-+ nls_uint32 n_sysdep_strings;
-+
-+ if (domain->hash_tab == NULL)
-+ /* This is invalid. These minor revisions need a hash table. */
-+ goto invalid;
-+
-+ n_sysdep_strings =
-+ W (domain->must_swap, data->n_sysdep_strings);
-+ if (n_sysdep_strings > 0)
-+ {
-+ nls_uint32 n_sysdep_segments;
-+ const struct sysdep_segment *sysdep_segments;
-+ const char **sysdep_segment_values;
-+ const nls_uint32 *orig_sysdep_tab;
-+ const nls_uint32 *trans_sysdep_tab;
-+ nls_uint32 n_inmem_sysdep_strings;
-+ size_t memneed;
-+ char *mem;
-+ struct sysdep_string_desc *inmem_orig_sysdep_tab;
-+ struct sysdep_string_desc *inmem_trans_sysdep_tab;
-+ nls_uint32 *inmem_hash_tab;
-+ unsigned int i, j;
-+
-+ /* Get the values of the system dependent segments. */
-+ n_sysdep_segments =
-+ W (domain->must_swap, data->n_sysdep_segments);
-+ sysdep_segments = (const struct sysdep_segment *)
-+ ((char *) data
-+ + W (domain->must_swap, data->sysdep_segments_offset));
-+ sysdep_segment_values =
-+ alloca (n_sysdep_segments * sizeof (const char *));
-+ for (i = 0; i < n_sysdep_segments; i++)
-+ {
-+ const char *name =
-+ (char *) data
-+ + W (domain->must_swap, sysdep_segments[i].offset);
-+ nls_uint32 namelen =
-+ W (domain->must_swap, sysdep_segments[i].length);
-+
-+ if (!(namelen > 0 && name[namelen - 1] == '\0'))
-+ {
-+ freea (sysdep_segment_values);
-+ goto invalid;
-+ }
-+
-+ sysdep_segment_values[i] = get_sysdep_segment_value (name);
-+ }
-+
-+ orig_sysdep_tab = (const nls_uint32 *)
-+ ((char *) data
-+ + W (domain->must_swap, data->orig_sysdep_tab_offset));
-+ trans_sysdep_tab = (const nls_uint32 *)
-+ ((char *) data
-+ + W (domain->must_swap, data->trans_sysdep_tab_offset));
-+
-+ /* Compute the amount of additional memory needed for the
-+ system dependent strings and the augmented hash table.
-+ At the same time, also drop string pairs which refer to
-+ an undefined system dependent segment. */
-+ n_inmem_sysdep_strings = 0;
-+ memneed = domain->hash_size * sizeof (nls_uint32);
-+ for (i = 0; i < n_sysdep_strings; i++)
-+ {
-+ int valid = 1;
-+ size_t needs[2];
-+
-+ for (j = 0; j < 2; j++)
-+ {
-+ const struct sysdep_string *sysdep_string =
-+ (const struct sysdep_string *)
-+ ((char *) data
-+ + W (domain->must_swap,
-+ j == 0
-+ ? orig_sysdep_tab[i]
-+ : trans_sysdep_tab[i]));
-+ size_t need = 0;
-+ const struct segment_pair *p = sysdep_string->segments;
-+
-+ if (W (domain->must_swap, p->sysdepref) != SEGMENTS_END)
-+ for (p = sysdep_string->segments;; p++)
-+ {
-+ nls_uint32 sysdepref;
-+
-+ need += W (domain->must_swap, p->segsize);
-+
-+ sysdepref = W (domain->must_swap, p->sysdepref);
-+ if (sysdepref == SEGMENTS_END)
-+ break;
-+
-+ if (sysdepref >= n_sysdep_segments)
-+ {
-+ /* Invalid. */
-+ freea (sysdep_segment_values);
-+ goto invalid;
-+ }
-+
-+ if (sysdep_segment_values[sysdepref] == NULL)
-+ {
-+ /* This particular string pair is invalid. */
-+ valid = 0;
-+ break;
-+ }
-+
-+ need += strlen (sysdep_segment_values[sysdepref]);
-+ }
-+
-+ needs[j] = need;
-+ if (!valid)
-+ break;
-+ }
-+
-+ if (valid)
-+ {
-+ n_inmem_sysdep_strings++;
-+ memneed += needs[0] + needs[1];
-+ }
-+ }
-+ memneed += 2 * n_inmem_sysdep_strings
-+ * sizeof (struct sysdep_string_desc);
-+
-+ if (n_inmem_sysdep_strings > 0)
-+ {
-+ unsigned int k;
-+
-+ /* Allocate additional memory. */
-+ mem = (char *) malloc (memneed);
-+ if (mem == NULL)
-+ goto invalid;
-+
-+ domain->malloced = mem;
-+ inmem_orig_sysdep_tab = (struct sysdep_string_desc *) mem;
-+ mem += n_inmem_sysdep_strings
-+ * sizeof (struct sysdep_string_desc);
-+ inmem_trans_sysdep_tab = (struct sysdep_string_desc *) mem;
-+ mem += n_inmem_sysdep_strings
-+ * sizeof (struct sysdep_string_desc);
-+ inmem_hash_tab = (nls_uint32 *) mem;
-+ mem += domain->hash_size * sizeof (nls_uint32);
-+
-+ /* Compute the system dependent strings. */
-+ k = 0;
-+ for (i = 0; i < n_sysdep_strings; i++)
-+ {
-+ int valid = 1;
-+
-+ for (j = 0; j < 2; j++)
-+ {
-+ const struct sysdep_string *sysdep_string =
-+ (const struct sysdep_string *)
-+ ((char *) data
-+ + W (domain->must_swap,
-+ j == 0
-+ ? orig_sysdep_tab[i]
-+ : trans_sysdep_tab[i]));
-+ const struct segment_pair *p =
-+ sysdep_string->segments;
-+
-+ if (W (domain->must_swap, p->sysdepref)
-+ != SEGMENTS_END)
-+ for (p = sysdep_string->segments;; p++)
-+ {
-+ nls_uint32 sysdepref;
-+
-+ sysdepref =
-+ W (domain->must_swap, p->sysdepref);
-+ if (sysdepref == SEGMENTS_END)
-+ break;
-+
-+ if (sysdep_segment_values[sysdepref] == NULL)
-+ {
-+ /* This particular string pair is
-+ invalid. */
-+ valid = 0;
-+ break;
-+ }
-+ }
-+
-+ if (!valid)
-+ break;
-+ }
-+
-+ if (valid)
-+ {
-+ for (j = 0; j < 2; j++)
-+ {
-+ const struct sysdep_string *sysdep_string =
-+ (const struct sysdep_string *)
-+ ((char *) data
-+ + W (domain->must_swap,
-+ j == 0
-+ ? orig_sysdep_tab[i]
-+ : trans_sysdep_tab[i]));
-+ const char *static_segments =
-+ (char *) data
-+ + W (domain->must_swap, sysdep_string->offset);
-+ const struct segment_pair *p =
-+ sysdep_string->segments;
-+
-+ /* Concatenate the segments, and fill
-+ inmem_orig_sysdep_tab[k] (for j == 0) and
-+ inmem_trans_sysdep_tab[k] (for j == 1). */
-+
-+ struct sysdep_string_desc *inmem_tab_entry =
-+ (j == 0
-+ ? inmem_orig_sysdep_tab
-+ : inmem_trans_sysdep_tab)
-+ + k;
-+
-+ if (W (domain->must_swap, p->sysdepref)
-+ == SEGMENTS_END)
-+ {
-+ /* Only one static segment. */
-+ inmem_tab_entry->length =
-+ W (domain->must_swap, p->segsize);
-+ inmem_tab_entry->pointer = static_segments;
-+ }
-+ else
-+ {
-+ inmem_tab_entry->pointer = mem;
-+
-+ for (p = sysdep_string->segments;; p++)
-+ {
-+ nls_uint32 segsize =
-+ W (domain->must_swap, p->segsize);
-+ nls_uint32 sysdepref =
-+ W (domain->must_swap, p->sysdepref);
-+ size_t n;
-+
-+ if (segsize > 0)
-+ {
-+ memcpy (mem, static_segments, segsize);
-+ mem += segsize;
-+ static_segments += segsize;
-+ }
-+
-+ if (sysdepref == SEGMENTS_END)
-+ break;
-+
-+ n = strlen (sysdep_segment_values[sysdepref]);
-+ memcpy (mem, sysdep_segment_values[sysdepref], n);
-+ mem += n;
-+ }
-+
-+ inmem_tab_entry->length =
-+ mem - inmem_tab_entry->pointer;
-+ }
-+ }
-+
-+ k++;
-+ }
-+ }
-+ if (k != n_inmem_sysdep_strings)
-+ abort ();
-+
-+ /* Compute the augmented hash table. */
-+ for (i = 0; i < domain->hash_size; i++)
-+ inmem_hash_tab[i] =
-+ W (domain->must_swap_hash_tab, domain->hash_tab[i]);
-+ for (i = 0; i < n_inmem_sysdep_strings; i++)
-+ {
-+ const char *msgid = inmem_orig_sysdep_tab[i].pointer;
-+ nls_uint32 hash_val = hash_string (msgid);
-+ nls_uint32 idx = hash_val % domain->hash_size;
-+ nls_uint32 incr =
-+ 1 + (hash_val % (domain->hash_size - 2));
-+
-+ for (;;)
-+ {
-+ if (inmem_hash_tab[idx] == 0)
-+ {
-+ /* Hash table entry is empty. Use it. */
-+ inmem_hash_tab[idx] = 1 + domain->nstrings + i;
-+ break;
-+ }
-+
-+ if (idx >= domain->hash_size - incr)
-+ idx -= domain->hash_size - incr;
-+ else
-+ idx += incr;
-+ }
-+ }
-+
-+ domain->n_sysdep_strings = n_inmem_sysdep_strings;
-+ domain->orig_sysdep_tab = inmem_orig_sysdep_tab;
-+ domain->trans_sysdep_tab = inmem_trans_sysdep_tab;
-+
-+ domain->hash_tab = inmem_hash_tab;
-+ domain->must_swap_hash_tab = 0;
-+ }
-+ else
-+ {
-+ domain->n_sysdep_strings = 0;
-+ domain->orig_sysdep_tab = NULL;
-+ domain->trans_sysdep_tab = NULL;
-+ }
-+
-+ freea (sysdep_segment_values);
-+ }
-+ else
-+ {
-+ domain->n_sysdep_strings = 0;
-+ domain->orig_sysdep_tab = NULL;
-+ domain->trans_sysdep_tab = NULL;
-+ }
-+ }
-+ break;
-+ }
- break;
- default:
-- /* This is an illegal revision. */
--#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
-- || defined _LIBC
-+ /* This is an invalid revision. */
-+ invalid:
-+ /* This is an invalid .mo file. */
-+ if (domain->malloced)
-+ free (domain->malloced);
-+#ifdef HAVE_MMAP
- if (use_mmap)
-- munmap ((caddr_t) data, st.st_size);
-+ munmap ((caddr_t) data, size);
- else
- #endif
- free (data);
-@@ -193,7 +1385,36 @@
- return;
- }
-
-- /* Show that one domain is changed. This might make some cached
-- translations invalid. */
-- ++_nl_msg_cat_cntr;
-+ /* Now initialize the character set converter from the character set
-+ the file is encoded with (found in the header entry) to the domain's
-+ specified character set or the locale's character set. */
-+ nullentry = _nl_init_domain_conv (domain_file, domain, domainbinding);
-+
-+ /* Also look for a plural specification. */
-+ EXTRACT_PLURAL_EXPRESSION (nullentry, &domain->plural, &domain->nplurals);
- }
-+
-+
-+#ifdef _LIBC
-+void
-+internal_function
-+_nl_unload_domain (struct loaded_domain *domain)
-+{
-+ if (domain->plural != &__gettext_germanic_plural)
-+ __gettext_free_exp (domain->plural);
-+
-+ _nl_free_domain_conv (domain);
-+
-+ if (domain->malloced)
-+ free (domain->malloced);
-+
-+# ifdef _POSIX_MAPPED_FILES
-+ if (domain->use_mmap)
-+ munmap ((caddr_t) domain->data, domain->mmap_size);
-+ else
-+# endif /* _POSIX_MAPPED_FILES */
-+ free ((void *) domain->data);
-+
-+ free (domain);
-+}
-+#endif
---- lrzsz-0.12.20.safe/intl/localcharset.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/localcharset.c 2004-09-12 14:40:34.478729392 -0400
-@@ -0,0 +1,398 @@
-+/* Determine a canonical name for the current locale's character encoding.
-+
-+ Copyright (C) 2000-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+/* Written by Bruno Haible <bruno@clisp.org>. */
-+
-+#ifdef HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+/* Specification. */
-+#include "localcharset.h"
-+
-+#if HAVE_STDDEF_H
-+# include <stddef.h>
-+#endif
-+
-+#include <stdio.h>
-+#if HAVE_STRING_H
-+# include <string.h>
-+#else
-+# include <strings.h>
-+#endif
-+#if HAVE_STDLIB_H
-+# include <stdlib.h>
-+#endif
-+
-+#if defined _WIN32 || defined __WIN32__
-+# undef WIN32 /* avoid warning on mingw32 */
-+# define WIN32
-+#endif
-+
-+#if defined __EMX__
-+/* Assume EMX program runs on OS/2, even if compiled under DOS. */
-+# define OS2
-+#endif
-+
-+#if !defined WIN32
-+# if HAVE_LANGINFO_CODESET
-+# include <langinfo.h>
-+# else
-+# if HAVE_SETLOCALE
-+# include <locale.h>
-+# endif
-+# endif
-+#elif defined WIN32
-+# define WIN32_LEAN_AND_MEAN
-+# include <windows.h>
-+#endif
-+#if defined OS2
-+# define INCL_DOS
-+# include <os2.h>
-+#endif
-+
-+#if ENABLE_RELOCATABLE
-+# include "relocatable.h"
-+#else
-+# define relocate(pathname) (pathname)
-+#endif
-+
-+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
-+ /* Win32, OS/2, DOS */
-+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
-+#endif
-+
-+#ifndef DIRECTORY_SEPARATOR
-+# define DIRECTORY_SEPARATOR '/'
-+#endif
-+
-+#ifndef ISSLASH
-+# define ISSLASH(C) ((C) == DIRECTORY_SEPARATOR)
-+#endif
-+
-+#if HAVE_DECL_GETC_UNLOCKED
-+# undef getc
-+# define getc getc_unlocked
-+#endif
-+
-+/* The following static variable is declared 'volatile' to avoid a
-+ possible multithread problem in the function get_charset_aliases. If we
-+ are running in a threaded environment, and if two threads initialize
-+ 'charset_aliases' simultaneously, both will produce the same value,
-+ and everything will be ok if the two assignments to 'charset_aliases'
-+ are atomic. But I don't know what will happen if the two assignments mix. */
-+#if __STDC__ != 1
-+# define volatile /* empty */
-+#endif
-+/* Pointer to the contents of the charset.alias file, if it has already been
-+ read, else NULL. Its format is:
-+ ALIAS_1 '\0' CANONICAL_1 '\0' ... ALIAS_n '\0' CANONICAL_n '\0' '\0' */
-+static const char * volatile charset_aliases;
-+
-+/* Return a pointer to the contents of the charset.alias file. */
-+static const char *
-+get_charset_aliases ()
-+{
-+ const char *cp;
-+
-+ cp = charset_aliases;
-+ if (cp == NULL)
-+ {
-+#if !(defined VMS || defined WIN32)
-+ FILE *fp;
-+ const char *dir = relocate (LIBDIR);
-+ const char *base = "charset.alias";
-+ char *file_name;
-+
-+ /* Concatenate dir and base into freshly allocated file_name. */
-+ {
-+ size_t dir_len = strlen (dir);
-+ size_t base_len = strlen (base);
-+ int add_slash = (dir_len > 0 && !ISSLASH (dir[dir_len - 1]));
-+ file_name = (char *) malloc (dir_len + add_slash + base_len + 1);
-+ if (file_name != NULL)
-+ {
-+ memcpy (file_name, dir, dir_len);
-+ if (add_slash)
-+ file_name[dir_len] = DIRECTORY_SEPARATOR;
-+ memcpy (file_name + dir_len + add_slash, base, base_len + 1);
-+ }
-+ }
-+
-+ if (file_name == NULL || (fp = fopen (file_name, "r")) == NULL)
-+ /* Out of memory or file not found, treat it as empty. */
-+ cp = "";
-+ else
-+ {
-+ /* Parse the file's contents. */
-+ int c;
-+ char buf1[50+1];
-+ char buf2[50+1];
-+ char *res_ptr = NULL;
-+ size_t res_size = 0;
-+ size_t l1, l2;
-+
-+ for (;;)
-+ {
-+ c = getc (fp);
-+ if (c == EOF)
-+ break;
-+ if (c == '\n' || c == ' ' || c == '\t')
-+ continue;
-+ if (c == '#')
-+ {
-+ /* Skip comment, to end of line. */
-+ do
-+ c = getc (fp);
-+ while (!(c == EOF || c == '\n'));
-+ if (c == EOF)
-+ break;
-+ continue;
-+ }
-+ ungetc (c, fp);
-+ if (fscanf (fp, "%50s %50s", buf1, buf2) < 2)
-+ break;
-+ l1 = strlen (buf1);
-+ l2 = strlen (buf2);
-+ if (res_size == 0)
-+ {
-+ res_size = l1 + 1 + l2 + 1;
-+ res_ptr = (char *) malloc (res_size + 1);
-+ }
-+ else
-+ {
-+ res_size += l1 + 1 + l2 + 1;
-+ res_ptr = (char *) realloc (res_ptr, res_size + 1);
-+ }
-+ if (res_ptr == NULL)
-+ {
-+ /* Out of memory. */
-+ res_size = 0;
-+ break;
-+ }
-+ strcpy (res_ptr + res_size - (l2 + 1) - (l1 + 1), buf1);
-+ strcpy (res_ptr + res_size - (l2 + 1), buf2);
-+ }
-+ fclose (fp);
-+ if (res_size == 0)
-+ cp = "";
-+ else
-+ {
-+ *(res_ptr + res_size) = '\0';
-+ cp = res_ptr;
-+ }
-+ }
-+
-+ if (file_name != NULL)
-+ free (file_name);
-+
-+#else
-+
-+# if defined VMS
-+ /* To avoid the troubles of an extra file charset.alias_vms in the
-+ sources of many GNU packages, simply inline the aliases here. */
-+ /* The list of encodings is taken from the OpenVMS 7.3-1 documentation
-+ "Compaq C Run-Time Library Reference Manual for OpenVMS systems"
-+ section 10.7 "Handling Different Character Sets". */
-+ cp = "ISO8859-1" "\0" "ISO-8859-1" "\0"
-+ "ISO8859-2" "\0" "ISO-8859-2" "\0"
-+ "ISO8859-5" "\0" "ISO-8859-5" "\0"
-+ "ISO8859-7" "\0" "ISO-8859-7" "\0"
-+ "ISO8859-8" "\0" "ISO-8859-8" "\0"
-+ "ISO8859-9" "\0" "ISO-8859-9" "\0"
-+ /* Japanese */
-+ "eucJP" "\0" "EUC-JP" "\0"
-+ "SJIS" "\0" "SHIFT_JIS" "\0"
-+ "DECKANJI" "\0" "DEC-KANJI" "\0"
-+ "SDECKANJI" "\0" "EUC-JP" "\0"
-+ /* Chinese */
-+ "eucTW" "\0" "EUC-TW" "\0"
-+ "DECHANYU" "\0" "DEC-HANYU" "\0"
-+ "DECHANZI" "\0" "GB2312" "\0"
-+ /* Korean */
-+ "DECKOREAN" "\0" "EUC-KR" "\0";
-+# endif
-+
-+# if defined WIN32
-+ /* To avoid the troubles of installing a separate file in the same
-+ directory as the DLL and of retrieving the DLL's directory at
-+ runtime, simply inline the aliases here. */
-+
-+ cp = "CP936" "\0" "GBK" "\0"
-+ "CP1361" "\0" "JOHAB" "\0"
-+ "CP20127" "\0" "ASCII" "\0"
-+ "CP20866" "\0" "KOI8-R" "\0"
-+ "CP21866" "\0" "KOI8-RU" "\0"
-+ "CP28591" "\0" "ISO-8859-1" "\0"
-+ "CP28592" "\0" "ISO-8859-2" "\0"
-+ "CP28593" "\0" "ISO-8859-3" "\0"
-+ "CP28594" "\0" "ISO-8859-4" "\0"
-+ "CP28595" "\0" "ISO-8859-5" "\0"
-+ "CP28596" "\0" "ISO-8859-6" "\0"
-+ "CP28597" "\0" "ISO-8859-7" "\0"
-+ "CP28598" "\0" "ISO-8859-8" "\0"
-+ "CP28599" "\0" "ISO-8859-9" "\0"
-+ "CP28605" "\0" "ISO-8859-15" "\0";
-+# endif
-+#endif
-+
-+ charset_aliases = cp;
-+ }
-+
-+ return cp;
-+}
-+
-+/* Determine the current locale's character encoding, and canonicalize it
-+ into one of the canonical names listed in config.charset.
-+ The result must not be freed; it is statically allocated.
-+ If the canonical name cannot be determined, the result is a non-canonical
-+ name. */
-+
-+#ifdef STATIC
-+STATIC
-+#endif
-+const char *
-+locale_charset ()
-+{
-+ const char *codeset;
-+ const char *aliases;
-+
-+#if !(defined WIN32 || defined OS2)
-+
-+# if HAVE_LANGINFO_CODESET
-+
-+ /* Most systems support nl_langinfo (CODESET) nowadays. */
-+ codeset = nl_langinfo (CODESET);
-+
-+# else
-+
-+ /* On old systems which lack it, use setlocale or getenv. */
-+ const char *locale = NULL;
-+
-+ /* But most old systems don't have a complete set of locales. Some
-+ (like SunOS 4 or DJGPP) have only the C locale. Therefore we don't
-+ use setlocale here; it would return "C" when it doesn't support the
-+ locale name the user has set. */
-+# if HAVE_SETLOCALE && 0
-+ locale = setlocale (LC_CTYPE, NULL);
-+# endif
-+ if (locale == NULL || locale[0] == '\0')
-+ {
-+ locale = getenv ("LC_ALL");
-+ if (locale == NULL || locale[0] == '\0')
-+ {
-+ locale = getenv ("LC_CTYPE");
-+ if (locale == NULL || locale[0] == '\0')
-+ locale = getenv ("LANG");
-+ }
-+ }
-+
-+ /* On some old systems, one used to set locale = "iso8859_1". On others,
-+ you set it to "language_COUNTRY.charset". In any case, we resolve it
-+ through the charset.alias file. */
-+ codeset = locale;
-+
-+# endif
-+
-+#elif defined WIN32
-+
-+ static char buf[2 + 10 + 1];
-+
-+ /* Woe32 has a function returning the locale's codepage as a number. */
-+ sprintf (buf, "CP%u", GetACP ());
-+ codeset = buf;
-+
-+#elif defined OS2
-+
-+ const char *locale;
-+ static char buf[2 + 10 + 1];
-+ ULONG cp[3];
-+ ULONG cplen;
-+
-+ /* Allow user to override the codeset, as set in the operating system,
-+ with standard language environment variables. */
-+ locale = getenv ("LC_ALL");
-+ if (locale == NULL || locale[0] == '\0')
-+ {
-+ locale = getenv ("LC_CTYPE");
-+ if (locale == NULL || locale[0] == '\0')
-+ locale = getenv ("LANG");
-+ }
-+ if (locale != NULL && locale[0] != '\0')
-+ {
-+ /* If the locale name contains an encoding after the dot, return it. */
-+ const char *dot = strchr (locale, '.');
-+
-+ if (dot != NULL)
-+ {
-+ const char *modifier;
-+
-+ dot++;
-+ /* Look for the possible @... trailer and remove it, if any. */
-+ modifier = strchr (dot, '@');
-+ if (modifier == NULL)
-+ return dot;
-+ if (modifier - dot < sizeof (buf))
-+ {
-+ memcpy (buf, dot, modifier - dot);
-+ buf [modifier - dot] = '\0';
-+ return buf;
-+ }
-+ }
-+
-+ /* Resolve through the charset.alias file. */
-+ codeset = locale;
-+ }
-+ else
-+ {
-+ /* OS/2 has a function returning the locale's codepage as a number. */
-+ if (DosQueryCp (sizeof (cp), cp, &cplen))
-+ codeset = "";
-+ else
-+ {
-+ sprintf (buf, "CP%u", cp[0]);
-+ codeset = buf;
-+ }
-+ }
-+
-+#endif
-+
-+ if (codeset == NULL)
-+ /* The canonical name cannot be determined. */
-+ codeset = "";
-+
-+ /* Resolve alias. */
-+ for (aliases = get_charset_aliases ();
-+ *aliases != '\0';
-+ aliases += strlen (aliases) + 1, aliases += strlen (aliases) + 1)
-+ if (strcmp (codeset, aliases) == 0
-+ || (aliases[0] == '*' && aliases[1] == '\0'))
-+ {
-+ codeset = aliases + strlen (aliases) + 1;
-+ break;
-+ }
-+
-+ /* Don't return an empty string. GNU libc and GNU libiconv interpret
-+ the empty string as denoting "the locale's character encoding",
-+ thus GNU libiconv would call this function a second time. */
-+ if (codeset[0] == '\0')
-+ codeset = "ASCII";
-+
-+ return codeset;
-+}
---- lrzsz-0.12.20.safe/intl/localcharset.h 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/localcharset.h 2004-09-12 14:40:34.483728632 -0400
-@@ -0,0 +1,42 @@
-+/* Determine a canonical name for the current locale's character encoding.
-+ Copyright (C) 2000-2003 Free Software Foundation, Inc.
-+ This file is part of the GNU CHARSET Library.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifndef _LOCALCHARSET_H
-+#define _LOCALCHARSET_H
-+
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+
-+/* Determine the current locale's character encoding, and canonicalize it
-+ into one of the canonical names listed in config.charset.
-+ The result must not be freed; it is statically allocated.
-+ If the canonical name cannot be determined, the result is a non-canonical
-+ name. */
-+extern const char * locale_charset (void);
-+
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+
-+#endif /* _LOCALCHARSET_H */
---- lrzsz-0.12.20.safe/intl/locale.alias 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/locale.alias 2004-09-12 14:40:34.499726200 -0400
-@@ -0,0 +1,78 @@
-+# Locale name alias data base.
-+# Copyright (C) 1996-2001,2003 Free Software Foundation, Inc.
-+#
-+# This program is free software; you can redistribute it and/or modify it
-+# under the terms of the GNU Library General Public License as published
-+# by the Free Software Foundation; either version 2, or (at your option)
-+# any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# Library General Public License for more details.
-+#
-+# You should have received a copy of the GNU Library General Public
-+# License along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+# USA.
-+
-+# The format of this file is the same as for the corresponding file of
-+# the X Window System, which normally can be found in
-+# /usr/lib/X11/locale/locale.alias
-+# A single line contains two fields: an alias and a substitution value.
-+# All entries are case independent.
-+
-+# Note: This file is far from being complete. If you have a value for
-+# your own site which you think might be useful for others too, share
-+# it with the rest of us. Send it using the `glibcbug' script to
-+# bugs@gnu.org.
-+
-+# Packages using this file:
-+
-+bokmal nb_NO.ISO-8859-1
-+bokmål nb_NO.ISO-8859-1
-+catalan ca_ES.ISO-8859-1
-+croatian hr_HR.ISO-8859-2
-+czech cs_CZ.ISO-8859-2
-+danish da_DK.ISO-8859-1
-+dansk da_DK.ISO-8859-1
-+deutsch de_DE.ISO-8859-1
-+dutch nl_NL.ISO-8859-1
-+eesti et_EE.ISO-8859-1
-+estonian et_EE.ISO-8859-1
-+finnish fi_FI.ISO-8859-1
-+français fr_FR.ISO-8859-1
-+french fr_FR.ISO-8859-1
-+galego gl_ES.ISO-8859-1
-+galician gl_ES.ISO-8859-1
-+german de_DE.ISO-8859-1
-+greek el_GR.ISO-8859-7
-+hebrew he_IL.ISO-8859-8
-+hrvatski hr_HR.ISO-8859-2
-+hungarian hu_HU.ISO-8859-2
-+icelandic is_IS.ISO-8859-1
-+italian it_IT.ISO-8859-1
-+japanese ja_JP.eucJP
-+japanese.euc ja_JP.eucJP
-+ja_JP ja_JP.eucJP
-+ja_JP.ujis ja_JP.eucJP
-+japanese.sjis ja_JP.SJIS
-+korean ko_KR.eucKR
-+korean.euc ko_KR.eucKR
-+ko_KR ko_KR.eucKR
-+lithuanian lt_LT.ISO-8859-13
-+no_NO nb_NO.ISO-8859-1
-+no_NO.ISO-8859-1 nb_NO.ISO-8859-1
-+norwegian nb_NO.ISO-8859-1
-+nynorsk nn_NO.ISO-8859-1
-+polish pl_PL.ISO-8859-2
-+portuguese pt_PT.ISO-8859-1
-+romanian ro_RO.ISO-8859-2
-+russian ru_RU.ISO-8859-5
-+slovak sk_SK.ISO-8859-2
-+slovene sl_SI.ISO-8859-2
-+slovenian sl_SI.ISO-8859-2
-+spanish es_ES.ISO-8859-1
-+swedish sv_SE.ISO-8859-1
-+thai th_TH.TIS-620
-+turkish tr_TR.ISO-8859-9
---- lrzsz-0.12.20.safe/intl/localealias.c 1998-04-26 09:22:37.000000000 -0400
-+++ lrzsz-0.12.20/intl/localealias.c 2004-09-12 14:40:34.505725288 -0400
-@@ -1,20 +1,27 @@
--/* Handle aliases for locale names
-- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-- Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-+/* Handle aliases for locale names.
-+ Copyright (C) 1995-1999, 2000-2001, 2003 Free Software Foundation, Inc.
-
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+/* Tell glibc's <string.h> to provide a prototype for mempcpy().
-+ This must come before <config.h> because <config.h> may include
-+ <features.h>, and once <features.h> has been included, it's too late. */
-+#ifndef _GNU_SOURCE
-+# define _GNU_SOURCE 1
-+#endif
-
- #ifdef HAVE_CONFIG_H
- # include <config.h>
-@@ -22,56 +29,45 @@
-
- #include <ctype.h>
- #include <stdio.h>
-+#if defined _LIBC || defined HAVE___FSETLOCKING
-+# include <stdio_ext.h>
-+#endif
- #include <sys/types.h>
-
- #ifdef __GNUC__
-+# undef alloca
- # define alloca __builtin_alloca
- # define HAVE_ALLOCA 1
- #else
--# if defined HAVE_ALLOCA_H || defined _LIBC
--# include <alloca.h>
-+# ifdef _MSC_VER
-+# include <malloc.h>
-+# define alloca _alloca
- # else
--# ifdef _AIX
-- #pragma alloca
-+# if defined HAVE_ALLOCA_H || defined _LIBC
-+# include <alloca.h>
- # else
--# ifndef alloca
-+# ifdef _AIX
-+ #pragma alloca
-+# else
-+# ifndef alloca
- char *alloca ();
-+# endif
- # endif
- # endif
- # endif
- #endif
-
--#if defined STDC_HEADERS || defined _LIBC
--# include <stdlib.h>
--#else
--char *getenv ();
--# ifdef HAVE_MALLOC_H
--# include <malloc.h>
--# else
--void free ();
--# endif
--#endif
-+#include <stdlib.h>
-+#include <string.h>
-
--#if defined HAVE_STRING_H || defined _LIBC
--# ifndef _GNU_SOURCE
--# define _GNU_SOURCE 1
--# endif
--# include <string.h>
-+#include "gettextP.h"
-+
-+#if ENABLE_RELOCATABLE
-+# include "relocatable.h"
- #else
--# include <strings.h>
--# ifndef memcpy
--# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
--# endif
--#endif
--#if !HAVE_STRCHR && !defined _LIBC
--# ifndef strchr
--# define strchr index
--# endif
-+# define relocate(pathname) (pathname)
- #endif
-
--#include "gettext.h"
--#include "gettextP.h"
--
- /* @@ end of prolog @@ */
-
- #ifdef _LIBC
-@@ -79,43 +75,49 @@
- because some ANSI C functions will require linking with this object
- file and the name space must not be polluted. */
- # define strcasecmp __strcasecmp
-+
-+# ifndef mempcpy
-+# define mempcpy __mempcpy
-+# endif
-+# define HAVE_MEMPCPY 1
-+# define HAVE___FSETLOCKING 1
-+
-+/* We need locking here since we can be called from different places. */
-+# include <bits/libc-lock.h>
-+
-+__libc_lock_define_initialized (static, lock);
-+#endif
-+
-+#ifndef internal_function
-+# define internal_function
- #endif
-
-+/* Some optimizations for glibc. */
-+#ifdef _LIBC
-+# define FEOF(fp) feof_unlocked (fp)
-+# define FGETS(buf, n, fp) fgets_unlocked (buf, n, fp)
-+#else
-+# define FEOF(fp) feof (fp)
-+# define FGETS(buf, n, fp) fgets (buf, n, fp)
-+#endif
-
--/* For those loosing systems which don't have `alloca' we have to add
-+/* For those losing systems which don't have `alloca' we have to add
- some additional code emulating it. */
- #ifdef HAVE_ALLOCA
--/* Nothing has to be done. */
--# define ADD_BLOCK(list, address) /* nothing */
--# define FREE_BLOCKS(list) /* nothing */
-+# define freea(p) /* nothing */
- #else
--struct block_list
--{
-- void *address;
-- struct block_list *next;
--};
--# define ADD_BLOCK(list, addr) \
-- do { \
-- struct block_list *newp = (struct block_list *) malloc (sizeof (*newp)); \
-- /* If we cannot get a free block we cannot add the new element to \
-- the list. */ \
-- if (newp != NULL) { \
-- newp->address = (addr); \
-- newp->next = (list); \
-- (list) = newp; \
-- } \
-- } while (0)
--# define FREE_BLOCKS(list) \
-- do { \
-- while (list != NULL) { \
-- struct block_list *old = list; \
-- list = list->next; \
-- free (old); \
-- } \
-- } while (0)
--# undef alloca
--# define alloca(size) (malloc (size))
--#endif /* have alloca */
-+# define alloca(n) malloc (n)
-+# define freea(p) free (p)
-+#endif
-+
-+#if defined _LIBC_REENTRANT || HAVE_DECL_FGETS_UNLOCKED
-+# undef fgets
-+# define fgets(buf, len, s) fgets_unlocked (buf, len, s)
-+#endif
-+#if defined _LIBC_REENTRANT || HAVE_DECL_FEOF_UNLOCKED
-+# undef feof
-+# define feof(s) feof_unlocked (s)
-+#endif
-
-
- struct alias_map
-@@ -125,26 +127,41 @@
- };
-
-
--static struct alias_map *map;
--static size_t nmap = 0;
--static size_t maxmap = 0;
-+#ifndef _LIBC
-+# define libc_freeres_ptr(decl) decl
-+#endif
-+
-+libc_freeres_ptr (static char *string_space);
-+static size_t string_space_act;
-+static size_t string_space_max;
-+libc_freeres_ptr (static struct alias_map *map);
-+static size_t nmap;
-+static size_t maxmap;
-
-
- /* Prototypes for local functions. */
--static size_t read_alias_file PARAMS ((const char *fname, int fname_len));
--static void extend_alias_table PARAMS ((void));
--static int alias_compare PARAMS ((const struct alias_map *map1,
-- const struct alias_map *map2));
-+static size_t read_alias_file (const char *fname, int fname_len)
-+ internal_function;
-+static int extend_alias_table (void);
-+static int alias_compare (const struct alias_map *map1,
-+ const struct alias_map *map2);
-
-
- const char *
--_nl_expand_alias (name)
-- const char *name;
-+_nl_expand_alias (const char *name)
- {
-- static const char *locale_alias_path = LOCALE_ALIAS_PATH;
-+ static const char *locale_alias_path;
- struct alias_map *retval;
-+ const char *result = NULL;
- size_t added;
-
-+#ifdef _LIBC
-+ __libc_lock_lock (lock);
-+#endif
-+
-+ if (locale_alias_path == NULL)
-+ locale_alias_path = LOCALE_ALIAS_PATH;
-+
- do
- {
- struct alias_map item;
-@@ -154,15 +171,18 @@
- if (nmap > 0)
- retval = (struct alias_map *) bsearch (&item, map, nmap,
- sizeof (struct alias_map),
-- (int (*) PARAMS ((const void *,
-- const void *))
-+ (int (*) (const void *,
-+ const void *)
- ) alias_compare);
- else
- retval = NULL;
-
- /* We really found an alias. Return the value. */
- if (retval != NULL)
-- return retval->value;
-+ {
-+ result = retval->value;
-+ break;
-+ }
-
- /* Perhaps we can find another alias file. */
- added = 0;
-@@ -170,11 +190,12 @@
- {
- const char *start;
-
-- while (locale_alias_path[0] == ':')
-+ while (locale_alias_path[0] == PATH_SEPARATOR)
- ++locale_alias_path;
- start = locale_alias_path;
-
-- while (locale_alias_path[0] != '\0' && locale_alias_path[0] != ':')
-+ while (locale_alias_path[0] != '\0'
-+ && locale_alias_path[0] != PATH_SEPARATOR)
- ++locale_alias_path;
-
- if (start < locale_alias_path)
-@@ -183,78 +204,87 @@
- }
- while (added != 0);
-
-- return NULL;
-+#ifdef _LIBC
-+ __libc_lock_unlock (lock);
-+#endif
-+
-+ return result;
- }
-
-
- static size_t
--read_alias_file (fname, fname_len)
-- const char *fname;
-- int fname_len;
-+internal_function
-+read_alias_file (const char *fname, int fname_len)
- {
--#ifndef HAVE_ALLOCA
-- struct block_list *block_list = NULL;
--#endif
- FILE *fp;
- char *full_fname;
- size_t added;
- static const char aliasfile[] = "/locale.alias";
-
- full_fname = (char *) alloca (fname_len + sizeof aliasfile);
-- ADD_BLOCK (block_list, full_fname);
-+#ifdef HAVE_MEMPCPY
-+ mempcpy (mempcpy (full_fname, fname, fname_len),
-+ aliasfile, sizeof aliasfile);
-+#else
- memcpy (full_fname, fname, fname_len);
- memcpy (&full_fname[fname_len], aliasfile, sizeof aliasfile);
-+#endif
-
-- fp = fopen (full_fname, "r");
-+ fp = fopen (relocate (full_fname), "r");
-+ freea (full_fname);
- if (fp == NULL)
-- {
-- FREE_BLOCKS (block_list);
-- return 0;
-- }
-+ return 0;
-+
-+#ifdef HAVE___FSETLOCKING
-+ /* No threads present. */
-+ __fsetlocking (fp, FSETLOCKING_BYCALLER);
-+#endif
-
- added = 0;
-- while (!feof (fp))
-+ while (!FEOF (fp))
- {
- /* It is a reasonable approach to use a fix buffer here because
- a) we are only interested in the first two fields
- b) these fields must be usable as file names and so must not
- be that long
-- */
-- char buf[BUFSIZ];
-+ We avoid a multi-kilobyte buffer here since this would use up
-+ stack space which we might not have if the program ran out of
-+ memory. */
-+ char buf[400];
- char *alias;
- char *value;
- char *cp;
-
-- if (fgets (buf, BUFSIZ, fp) == NULL)
-+ if (FGETS (buf, sizeof buf, fp) == NULL)
- /* EOF reached. */
- break;
-
- cp = buf;
- /* Ignore leading white space. */
-- while (isspace (cp[0]))
-+ while (isspace ((unsigned char) cp[0]))
- ++cp;
-
- /* A leading '#' signals a comment line. */
- if (cp[0] != '\0' && cp[0] != '#')
- {
- alias = cp++;
-- while (cp[0] != '\0' && !isspace (cp[0]))
-+ while (cp[0] != '\0' && !isspace ((unsigned char) cp[0]))
- ++cp;
- /* Terminate alias name. */
- if (cp[0] != '\0')
- *cp++ = '\0';
-
- /* Now look for the beginning of the value. */
-- while (isspace (cp[0]))
-+ while (isspace ((unsigned char) cp[0]))
- ++cp;
-
- if (cp[0] != '\0')
- {
-- char *tp;
-- size_t len;
-+ size_t alias_len;
-+ size_t value_len;
-
- value = cp++;
-- while (cp[0] != '\0' && !isspace (cp[0]))
-+ while (cp[0] != '\0' && !isspace ((unsigned char) cp[0]))
- ++cp;
- /* Terminate value. */
- if (cp[0] == '\n')
-@@ -269,28 +299,44 @@
- *cp++ = '\0';
-
- if (nmap >= maxmap)
-- extend_alias_table ();
--
-- /* We cannot depend on strdup available in the libc. Sigh! */
-- len = strlen (alias) + 1;
-- tp = (char *) malloc (len);
-- if (tp == NULL)
-- {
-- FREE_BLOCKS (block_list);
-+ if (__builtin_expect (extend_alias_table (), 0))
- return added;
-- }
-- memcpy (tp, alias, len);
-- map[nmap].alias = tp;
-
-- len = strlen (value) + 1;
-- tp = (char *) malloc (len);
-- if (tp == NULL)
-+ alias_len = strlen (alias) + 1;
-+ value_len = strlen (value) + 1;
-+
-+ if (string_space_act + alias_len + value_len > string_space_max)
- {
-- FREE_BLOCKS (block_list);
-- return added;
-+ /* Increase size of memory pool. */
-+ size_t new_size = (string_space_max
-+ + (alias_len + value_len > 1024
-+ ? alias_len + value_len : 1024));
-+ char *new_pool = (char *) realloc (string_space, new_size);
-+ if (new_pool == NULL)
-+ return added;
-+
-+ if (__builtin_expect (string_space != new_pool, 0))
-+ {
-+ size_t i;
-+
-+ for (i = 0; i < nmap; i++)
-+ {
-+ map[i].alias += new_pool - string_space;
-+ map[i].value += new_pool - string_space;
-+ }
-+ }
-+
-+ string_space = new_pool;
-+ string_space_max = new_size;
- }
-- memcpy (tp, value, len);
-- map[nmap].value = tp;
-+
-+ map[nmap].alias = memcpy (&string_space[string_space_act],
-+ alias, alias_len);
-+ string_space_act += alias_len;
-+
-+ map[nmap].value = memcpy (&string_space[string_space_act],
-+ value, value_len);
-+ string_space_act += value_len;
-
- ++nmap;
- ++added;
-@@ -299,14 +345,11 @@
-
- /* Possibly not the whole line fits into the buffer. Ignore
- the rest of the line. */
-- while (strchr (cp, '\n') == NULL)
-- {
-- cp = buf;
-- if (fgets (buf, BUFSIZ, fp) == NULL)
-- /* Make sure the inner loop will be left. The outer loop
-- will exit at the `feof' test. */
-- *cp = '\n';
-- }
-+ while (strchr (buf, '\n') == NULL)
-+ if (FGETS (buf, sizeof buf, fp) == NULL)
-+ /* Make sure the inner loop will be left. The outer loop
-+ will exit at the `feof' test. */
-+ break;
- }
-
- /* Should we test for ferror()? I think we have to silently ignore
-@@ -315,40 +358,33 @@
-
- if (added > 0)
- qsort (map, nmap, sizeof (struct alias_map),
-- (int (*) PARAMS ((const void *, const void *))) alias_compare);
-+ (int (*) (const void *, const void *)) alias_compare);
-
-- FREE_BLOCKS (block_list);
- return added;
- }
-
-
--static void
-+static int
- extend_alias_table ()
- {
- size_t new_size;
- struct alias_map *new_map;
-
- new_size = maxmap == 0 ? 100 : 2 * maxmap;
-- new_map = (struct alias_map *) malloc (new_size
-- * sizeof (struct alias_map));
-+ new_map = (struct alias_map *) realloc (map, (new_size
-+ * sizeof (struct alias_map)));
- if (new_map == NULL)
- /* Simply don't extend: we don't have any more core. */
-- return;
--
-- memcpy (new_map, map, nmap * sizeof (struct alias_map));
--
-- if (maxmap != 0)
-- free (map);
-+ return -1;
-
- map = new_map;
- maxmap = new_size;
-+ return 0;
- }
-
-
- static int
--alias_compare (map1, map2)
-- const struct alias_map *map1;
-- const struct alias_map *map2;
-+alias_compare (const struct alias_map *map1, const struct alias_map *map2)
- {
- #if defined _LIBC || defined HAVE_STRCASECMP
- return strcasecmp (map1->alias, map2->alias);
---- lrzsz-0.12.20.safe/intl/localename.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/localename.c 2004-09-12 14:40:34.510724528 -0400
-@@ -0,0 +1,1142 @@
-+/* Determine the current selected locale.
-+ Copyright (C) 1995-1999, 2000-2004 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+/* Written by Ulrich Drepper <drepper@gnu.org>, 1995. */
-+/* Win32 code written by Tor Lillqvist <tml@iki.fi>. */
-+
-+#ifdef HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+#include <stdlib.h>
-+#include <locale.h>
-+
-+#if defined _WIN32 || defined __WIN32__
-+# undef WIN32 /* avoid warning on mingw32 */
-+# define WIN32
-+#endif
-+
-+#ifdef WIN32
-+# define WIN32_LEAN_AND_MEAN
-+# include <windows.h>
-+/* List of language codes, sorted by value:
-+ 0x01 LANG_ARABIC
-+ 0x02 LANG_BULGARIAN
-+ 0x03 LANG_CATALAN
-+ 0x04 LANG_CHINESE
-+ 0x05 LANG_CZECH
-+ 0x06 LANG_DANISH
-+ 0x07 LANG_GERMAN
-+ 0x08 LANG_GREEK
-+ 0x09 LANG_ENGLISH
-+ 0x0a LANG_SPANISH
-+ 0x0b LANG_FINNISH
-+ 0x0c LANG_FRENCH
-+ 0x0d LANG_HEBREW
-+ 0x0e LANG_HUNGARIAN
-+ 0x0f LANG_ICELANDIC
-+ 0x10 LANG_ITALIAN
-+ 0x11 LANG_JAPANESE
-+ 0x12 LANG_KOREAN
-+ 0x13 LANG_DUTCH
-+ 0x14 LANG_NORWEGIAN
-+ 0x15 LANG_POLISH
-+ 0x16 LANG_PORTUGUESE
-+ 0x17 LANG_RHAETO_ROMANCE
-+ 0x18 LANG_ROMANIAN
-+ 0x19 LANG_RUSSIAN
-+ 0x1a LANG_CROATIAN == LANG_SERBIAN
-+ 0x1b LANG_SLOVAK
-+ 0x1c LANG_ALBANIAN
-+ 0x1d LANG_SWEDISH
-+ 0x1e LANG_THAI
-+ 0x1f LANG_TURKISH
-+ 0x20 LANG_URDU
-+ 0x21 LANG_INDONESIAN
-+ 0x22 LANG_UKRAINIAN
-+ 0x23 LANG_BELARUSIAN
-+ 0x24 LANG_SLOVENIAN
-+ 0x25 LANG_ESTONIAN
-+ 0x26 LANG_LATVIAN
-+ 0x27 LANG_LITHUANIAN
-+ 0x28 LANG_TAJIK
-+ 0x29 LANG_FARSI
-+ 0x2a LANG_VIETNAMESE
-+ 0x2b LANG_ARMENIAN
-+ 0x2c LANG_AZERI
-+ 0x2d LANG_BASQUE
-+ 0x2e LANG_SORBIAN
-+ 0x2f LANG_MACEDONIAN
-+ 0x30 LANG_SUTU
-+ 0x31 LANG_TSONGA
-+ 0x32 LANG_TSWANA
-+ 0x33 LANG_VENDA
-+ 0x34 LANG_XHOSA
-+ 0x35 LANG_ZULU
-+ 0x36 LANG_AFRIKAANS
-+ 0x37 LANG_GEORGIAN
-+ 0x38 LANG_FAEROESE
-+ 0x39 LANG_HINDI
-+ 0x3a LANG_MALTESE
-+ 0x3b LANG_SAAMI
-+ 0x3c LANG_GAELIC
-+ 0x3d LANG_YIDDISH
-+ 0x3e LANG_MALAY
-+ 0x3f LANG_KAZAK
-+ 0x40 LANG_KYRGYZ
-+ 0x41 LANG_SWAHILI
-+ 0x42 LANG_TURKMEN
-+ 0x43 LANG_UZBEK
-+ 0x44 LANG_TATAR
-+ 0x45 LANG_BENGALI
-+ 0x46 LANG_PUNJABI
-+ 0x47 LANG_GUJARATI
-+ 0x48 LANG_ORIYA
-+ 0x49 LANG_TAMIL
-+ 0x4a LANG_TELUGU
-+ 0x4b LANG_KANNADA
-+ 0x4c LANG_MALAYALAM
-+ 0x4d LANG_ASSAMESE
-+ 0x4e LANG_MARATHI
-+ 0x4f LANG_SANSKRIT
-+ 0x50 LANG_MONGOLIAN
-+ 0x51 LANG_TIBETAN
-+ 0x52 LANG_WELSH
-+ 0x53 LANG_CAMBODIAN
-+ 0x54 LANG_LAO
-+ 0x55 LANG_BURMESE
-+ 0x56 LANG_GALICIAN
-+ 0x57 LANG_KONKANI
-+ 0x58 LANG_MANIPURI
-+ 0x59 LANG_SINDHI
-+ 0x5a LANG_SYRIAC
-+ 0x5b LANG_SINHALESE
-+ 0x5c LANG_CHEROKEE
-+ 0x5d LANG_INUKTITUT
-+ 0x5e LANG_AMHARIC
-+ 0x5f LANG_TAMAZIGHT
-+ 0x60 LANG_KASHMIRI
-+ 0x61 LANG_NEPALI
-+ 0x62 LANG_FRISIAN
-+ 0x63 LANG_PASHTO
-+ 0x64 LANG_TAGALOG
-+ 0x65 LANG_DIVEHI
-+ 0x66 LANG_EDO
-+ 0x67 LANG_FULFULDE
-+ 0x68 LANG_HAUSA
-+ 0x69 LANG_IBIBIO
-+ 0x6a LANG_YORUBA
-+ 0x70 LANG_IGBO
-+ 0x71 LANG_KANURI
-+ 0x72 LANG_OROMO
-+ 0x73 LANG_TIGRINYA
-+ 0x74 LANG_GUARANI
-+ 0x75 LANG_HAWAIIAN
-+ 0x76 LANG_LATIN
-+ 0x77 LANG_SOMALI
-+ 0x78 LANG_YI
-+ 0x79 LANG_PAPIAMENTU
-+*/
-+/* Mingw headers don't have latest language and sublanguage codes. */
-+# ifndef LANG_AFRIKAANS
-+# define LANG_AFRIKAANS 0x36
-+# endif
-+# ifndef LANG_ALBANIAN
-+# define LANG_ALBANIAN 0x1c
-+# endif
-+# ifndef LANG_AMHARIC
-+# define LANG_AMHARIC 0x5e
-+# endif
-+# ifndef LANG_ARABIC
-+# define LANG_ARABIC 0x01
-+# endif
-+# ifndef LANG_ARMENIAN
-+# define LANG_ARMENIAN 0x2b
-+# endif
-+# ifndef LANG_ASSAMESE
-+# define LANG_ASSAMESE 0x4d
-+# endif
-+# ifndef LANG_AZERI
-+# define LANG_AZERI 0x2c
-+# endif
-+# ifndef LANG_BASQUE
-+# define LANG_BASQUE 0x2d
-+# endif
-+# ifndef LANG_BELARUSIAN
-+# define LANG_BELARUSIAN 0x23
-+# endif
-+# ifndef LANG_BENGALI
-+# define LANG_BENGALI 0x45
-+# endif
-+# ifndef LANG_BURMESE
-+# define LANG_BURMESE 0x55
-+# endif
-+# ifndef LANG_CAMBODIAN
-+# define LANG_CAMBODIAN 0x53
-+# endif
-+# ifndef LANG_CATALAN
-+# define LANG_CATALAN 0x03
-+# endif
-+# ifndef LANG_CHEROKEE
-+# define LANG_CHEROKEE 0x5c
-+# endif
-+# ifndef LANG_DIVEHI
-+# define LANG_DIVEHI 0x65
-+# endif
-+# ifndef LANG_EDO
-+# define LANG_EDO 0x66
-+# endif
-+# ifndef LANG_ESTONIAN
-+# define LANG_ESTONIAN 0x25
-+# endif
-+# ifndef LANG_FAEROESE
-+# define LANG_FAEROESE 0x38
-+# endif
-+# ifndef LANG_FARSI
-+# define LANG_FARSI 0x29
-+# endif
-+# ifndef LANG_FRISIAN
-+# define LANG_FRISIAN 0x62
-+# endif
-+# ifndef LANG_FULFULDE
-+# define LANG_FULFULDE 0x67
-+# endif
-+# ifndef LANG_GAELIC
-+# define LANG_GAELIC 0x3c
-+# endif
-+# ifndef LANG_GALICIAN
-+# define LANG_GALICIAN 0x56
-+# endif
-+# ifndef LANG_GEORGIAN
-+# define LANG_GEORGIAN 0x37
-+# endif
-+# ifndef LANG_GUARANI
-+# define LANG_GUARANI 0x74
-+# endif
-+# ifndef LANG_GUJARATI
-+# define LANG_GUJARATI 0x47
-+# endif
-+# ifndef LANG_HAUSA
-+# define LANG_HAUSA 0x68
-+# endif
-+# ifndef LANG_HAWAIIAN
-+# define LANG_HAWAIIAN 0x75
-+# endif
-+# ifndef LANG_HEBREW
-+# define LANG_HEBREW 0x0d
-+# endif
-+# ifndef LANG_HINDI
-+# define LANG_HINDI 0x39
-+# endif
-+# ifndef LANG_IBIBIO
-+# define LANG_IBIBIO 0x69
-+# endif
-+# ifndef LANG_IGBO
-+# define LANG_IGBO 0x70
-+# endif
-+# ifndef LANG_INDONESIAN
-+# define LANG_INDONESIAN 0x21
-+# endif
-+# ifndef LANG_INUKTITUT
-+# define LANG_INUKTITUT 0x5d
-+# endif
-+# ifndef LANG_KANNADA
-+# define LANG_KANNADA 0x4b
-+# endif
-+# ifndef LANG_KANURI
-+# define LANG_KANURI 0x71
-+# endif
-+# ifndef LANG_KASHMIRI
-+# define LANG_KASHMIRI 0x60
-+# endif
-+# ifndef LANG_KAZAK
-+# define LANG_KAZAK 0x3f
-+# endif
-+# ifndef LANG_KONKANI
-+# define LANG_KONKANI 0x57
-+# endif
-+# ifndef LANG_KYRGYZ
-+# define LANG_KYRGYZ 0x40
-+# endif
-+# ifndef LANG_LAO
-+# define LANG_LAO 0x54
-+# endif
-+# ifndef LANG_LATIN
-+# define LANG_LATIN 0x76
-+# endif
-+# ifndef LANG_LATVIAN
-+# define LANG_LATVIAN 0x26
-+# endif
-+# ifndef LANG_LITHUANIAN
-+# define LANG_LITHUANIAN 0x27
-+# endif
-+# ifndef LANG_MACEDONIAN
-+# define LANG_MACEDONIAN 0x2f
-+# endif
-+# ifndef LANG_MALAY
-+# define LANG_MALAY 0x3e
-+# endif
-+# ifndef LANG_MALAYALAM
-+# define LANG_MALAYALAM 0x4c
-+# endif
-+# ifndef LANG_MALTESE
-+# define LANG_MALTESE 0x3a
-+# endif
-+# ifndef LANG_MANIPURI
-+# define LANG_MANIPURI 0x58
-+# endif
-+# ifndef LANG_MARATHI
-+# define LANG_MARATHI 0x4e
-+# endif
-+# ifndef LANG_MONGOLIAN
-+# define LANG_MONGOLIAN 0x50
-+# endif
-+# ifndef LANG_NEPALI
-+# define LANG_NEPALI 0x61
-+# endif
-+# ifndef LANG_ORIYA
-+# define LANG_ORIYA 0x48
-+# endif
-+# ifndef LANG_OROMO
-+# define LANG_OROMO 0x72
-+# endif
-+# ifndef LANG_PAPIAMENTU
-+# define LANG_PAPIAMENTU 0x79
-+# endif
-+# ifndef LANG_PASHTO
-+# define LANG_PASHTO 0x63
-+# endif
-+# ifndef LANG_PUNJABI
-+# define LANG_PUNJABI 0x46
-+# endif
-+# ifndef LANG_RHAETO_ROMANCE
-+# define LANG_RHAETO_ROMANCE 0x17
-+# endif
-+# ifndef LANG_SAAMI
-+# define LANG_SAAMI 0x3b
-+# endif
-+# ifndef LANG_SANSKRIT
-+# define LANG_SANSKRIT 0x4f
-+# endif
-+# ifndef LANG_SERBIAN
-+# define LANG_SERBIAN 0x1a
-+# endif
-+# ifndef LANG_SINDHI
-+# define LANG_SINDHI 0x59
-+# endif
-+# ifndef LANG_SINHALESE
-+# define LANG_SINHALESE 0x5b
-+# endif
-+# ifndef LANG_SLOVAK
-+# define LANG_SLOVAK 0x1b
-+# endif
-+# ifndef LANG_SOMALI
-+# define LANG_SOMALI 0x77
-+# endif
-+# ifndef LANG_SORBIAN
-+# define LANG_SORBIAN 0x2e
-+# endif
-+# ifndef LANG_SUTU
-+# define LANG_SUTU 0x30
-+# endif
-+# ifndef LANG_SWAHILI
-+# define LANG_SWAHILI 0x41
-+# endif
-+# ifndef LANG_SYRIAC
-+# define LANG_SYRIAC 0x5a
-+# endif
-+# ifndef LANG_TAGALOG
-+# define LANG_TAGALOG 0x64
-+# endif
-+# ifndef LANG_TAJIK
-+# define LANG_TAJIK 0x28
-+# endif
-+# ifndef LANG_TAMAZIGHT
-+# define LANG_TAMAZIGHT 0x5f
-+# endif
-+# ifndef LANG_TAMIL
-+# define LANG_TAMIL 0x49
-+# endif
-+# ifndef LANG_TATAR
-+# define LANG_TATAR 0x44
-+# endif
-+# ifndef LANG_TELUGU
-+# define LANG_TELUGU 0x4a
-+# endif
-+# ifndef LANG_THAI
-+# define LANG_THAI 0x1e
-+# endif
-+# ifndef LANG_TIBETAN
-+# define LANG_TIBETAN 0x51
-+# endif
-+# ifndef LANG_TIGRINYA
-+# define LANG_TIGRINYA 0x73
-+# endif
-+# ifndef LANG_TSONGA
-+# define LANG_TSONGA 0x31
-+# endif
-+# ifndef LANG_TSWANA
-+# define LANG_TSWANA 0x32
-+# endif
-+# ifndef LANG_TURKMEN
-+# define LANG_TURKMEN 0x42
-+# endif
-+# ifndef LANG_UKRAINIAN
-+# define LANG_UKRAINIAN 0x22
-+# endif
-+# ifndef LANG_URDU
-+# define LANG_URDU 0x20
-+# endif
-+# ifndef LANG_UZBEK
-+# define LANG_UZBEK 0x43
-+# endif
-+# ifndef LANG_VENDA
-+# define LANG_VENDA 0x33
-+# endif
-+# ifndef LANG_VIETNAMESE
-+# define LANG_VIETNAMESE 0x2a
-+# endif
-+# ifndef LANG_WELSH
-+# define LANG_WELSH 0x52
-+# endif
-+# ifndef LANG_XHOSA
-+# define LANG_XHOSA 0x34
-+# endif
-+# ifndef LANG_YI
-+# define LANG_YI 0x78
-+# endif
-+# ifndef LANG_YIDDISH
-+# define LANG_YIDDISH 0x3d
-+# endif
-+# ifndef LANG_YORUBA
-+# define LANG_YORUBA 0x6a
-+# endif
-+# ifndef LANG_ZULU
-+# define LANG_ZULU 0x35
-+# endif
-+# ifndef SUBLANG_ARABIC_SAUDI_ARABIA
-+# define SUBLANG_ARABIC_SAUDI_ARABIA 0x01
-+# endif
-+# ifndef SUBLANG_ARABIC_IRAQ
-+# define SUBLANG_ARABIC_IRAQ 0x02
-+# endif
-+# ifndef SUBLANG_ARABIC_EGYPT
-+# define SUBLANG_ARABIC_EGYPT 0x03
-+# endif
-+# ifndef SUBLANG_ARABIC_LIBYA
-+# define SUBLANG_ARABIC_LIBYA 0x04
-+# endif
-+# ifndef SUBLANG_ARABIC_ALGERIA
-+# define SUBLANG_ARABIC_ALGERIA 0x05
-+# endif
-+# ifndef SUBLANG_ARABIC_MOROCCO
-+# define SUBLANG_ARABIC_MOROCCO 0x06
-+# endif
-+# ifndef SUBLANG_ARABIC_TUNISIA
-+# define SUBLANG_ARABIC_TUNISIA 0x07
-+# endif
-+# ifndef SUBLANG_ARABIC_OMAN
-+# define SUBLANG_ARABIC_OMAN 0x08
-+# endif
-+# ifndef SUBLANG_ARABIC_YEMEN
-+# define SUBLANG_ARABIC_YEMEN 0x09
-+# endif
-+# ifndef SUBLANG_ARABIC_SYRIA
-+# define SUBLANG_ARABIC_SYRIA 0x0a
-+# endif
-+# ifndef SUBLANG_ARABIC_JORDAN
-+# define SUBLANG_ARABIC_JORDAN 0x0b
-+# endif
-+# ifndef SUBLANG_ARABIC_LEBANON
-+# define SUBLANG_ARABIC_LEBANON 0x0c
-+# endif
-+# ifndef SUBLANG_ARABIC_KUWAIT
-+# define SUBLANG_ARABIC_KUWAIT 0x0d
-+# endif
-+# ifndef SUBLANG_ARABIC_UAE
-+# define SUBLANG_ARABIC_UAE 0x0e
-+# endif
-+# ifndef SUBLANG_ARABIC_BAHRAIN
-+# define SUBLANG_ARABIC_BAHRAIN 0x0f
-+# endif
-+# ifndef SUBLANG_ARABIC_QATAR
-+# define SUBLANG_ARABIC_QATAR 0x10
-+# endif
-+# ifndef SUBLANG_AZERI_LATIN
-+# define SUBLANG_AZERI_LATIN 0x01
-+# endif
-+# ifndef SUBLANG_AZERI_CYRILLIC
-+# define SUBLANG_AZERI_CYRILLIC 0x02
-+# endif
-+# ifndef SUBLANG_BENGALI_INDIA
-+# define SUBLANG_BENGALI_INDIA 0x00
-+# endif
-+# ifndef SUBLANG_BENGALI_BANGLADESH
-+# define SUBLANG_BENGALI_BANGLADESH 0x01
-+# endif
-+# ifndef SUBLANG_CHINESE_MACAU
-+# define SUBLANG_CHINESE_MACAU 0x05
-+# endif
-+# ifndef SUBLANG_ENGLISH_SOUTH_AFRICA
-+# define SUBLANG_ENGLISH_SOUTH_AFRICA 0x07
-+# endif
-+# ifndef SUBLANG_ENGLISH_JAMAICA
-+# define SUBLANG_ENGLISH_JAMAICA 0x08
-+# endif
-+# ifndef SUBLANG_ENGLISH_CARIBBEAN
-+# define SUBLANG_ENGLISH_CARIBBEAN 0x09
-+# endif
-+# ifndef SUBLANG_ENGLISH_BELIZE
-+# define SUBLANG_ENGLISH_BELIZE 0x0a
-+# endif
-+# ifndef SUBLANG_ENGLISH_TRINIDAD
-+# define SUBLANG_ENGLISH_TRINIDAD 0x0b
-+# endif
-+# ifndef SUBLANG_ENGLISH_ZIMBABWE
-+# define SUBLANG_ENGLISH_ZIMBABWE 0x0c
-+# endif
-+# ifndef SUBLANG_ENGLISH_PHILIPPINES
-+# define SUBLANG_ENGLISH_PHILIPPINES 0x0d
-+# endif
-+# ifndef SUBLANG_ENGLISH_INDONESIA
-+# define SUBLANG_ENGLISH_INDONESIA 0x0e
-+# endif
-+# ifndef SUBLANG_ENGLISH_HONGKONG
-+# define SUBLANG_ENGLISH_HONGKONG 0x0f
-+# endif
-+# ifndef SUBLANG_ENGLISH_INDIA
-+# define SUBLANG_ENGLISH_INDIA 0x10
-+# endif
-+# ifndef SUBLANG_ENGLISH_MALAYSIA
-+# define SUBLANG_ENGLISH_MALAYSIA 0x11
-+# endif
-+# ifndef SUBLANG_ENGLISH_SINGAPORE
-+# define SUBLANG_ENGLISH_SINGAPORE 0x12
-+# endif
-+# ifndef SUBLANG_FRENCH_LUXEMBOURG
-+# define SUBLANG_FRENCH_LUXEMBOURG 0x05
-+# endif
-+# ifndef SUBLANG_FRENCH_MONACO
-+# define SUBLANG_FRENCH_MONACO 0x06
-+# endif
-+# ifndef SUBLANG_FRENCH_WESTINDIES
-+# define SUBLANG_FRENCH_WESTINDIES 0x07
-+# endif
-+# ifndef SUBLANG_FRENCH_REUNION
-+# define SUBLANG_FRENCH_REUNION 0x08
-+# endif
-+# ifndef SUBLANG_FRENCH_CONGO
-+# define SUBLANG_FRENCH_CONGO 0x09
-+# endif
-+# ifndef SUBLANG_FRENCH_SENEGAL
-+# define SUBLANG_FRENCH_SENEGAL 0x0a
-+# endif
-+# ifndef SUBLANG_FRENCH_CAMEROON
-+# define SUBLANG_FRENCH_CAMEROON 0x0b
-+# endif
-+# ifndef SUBLANG_FRENCH_COTEDIVOIRE
-+# define SUBLANG_FRENCH_COTEDIVOIRE 0x0c
-+# endif
-+# ifndef SUBLANG_FRENCH_MALI
-+# define SUBLANG_FRENCH_MALI 0x0d
-+# endif
-+# ifndef SUBLANG_FRENCH_MOROCCO
-+# define SUBLANG_FRENCH_MOROCCO 0x0e
-+# endif
-+# ifndef SUBLANG_FRENCH_HAITI
-+# define SUBLANG_FRENCH_HAITI 0x0f
-+# endif
-+# ifndef SUBLANG_GERMAN_LUXEMBOURG
-+# define SUBLANG_GERMAN_LUXEMBOURG 0x04
-+# endif
-+# ifndef SUBLANG_GERMAN_LIECHTENSTEIN
-+# define SUBLANG_GERMAN_LIECHTENSTEIN 0x05
-+# endif
-+# ifndef SUBLANG_KASHMIRI_INDIA
-+# define SUBLANG_KASHMIRI_INDIA 0x02
-+# endif
-+# ifndef SUBLANG_MALAY_MALAYSIA
-+# define SUBLANG_MALAY_MALAYSIA 0x01
-+# endif
-+# ifndef SUBLANG_MALAY_BRUNEI_DARUSSALAM
-+# define SUBLANG_MALAY_BRUNEI_DARUSSALAM 0x02
-+# endif
-+# ifndef SUBLANG_NEPALI_INDIA
-+# define SUBLANG_NEPALI_INDIA 0x02
-+# endif
-+# ifndef SUBLANG_PUNJABI_INDIA
-+# define SUBLANG_PUNJABI_INDIA 0x00
-+# endif
-+# ifndef SUBLANG_PUNJABI_PAKISTAN
-+# define SUBLANG_PUNJABI_PAKISTAN 0x01
-+# endif
-+# ifndef SUBLANG_ROMANIAN_ROMANIA
-+# define SUBLANG_ROMANIAN_ROMANIA 0x00
-+# endif
-+# ifndef SUBLANG_ROMANIAN_MOLDOVA
-+# define SUBLANG_ROMANIAN_MOLDOVA 0x01
-+# endif
-+# ifndef SUBLANG_SERBIAN_LATIN
-+# define SUBLANG_SERBIAN_LATIN 0x02
-+# endif
-+# ifndef SUBLANG_SERBIAN_CYRILLIC
-+# define SUBLANG_SERBIAN_CYRILLIC 0x03
-+# endif
-+# ifndef SUBLANG_SINDHI_INDIA
-+# define SUBLANG_SINDHI_INDIA 0x00
-+# endif
-+# ifndef SUBLANG_SINDHI_PAKISTAN
-+# define SUBLANG_SINDHI_PAKISTAN 0x01
-+# endif
-+# ifndef SUBLANG_SPANISH_GUATEMALA
-+# define SUBLANG_SPANISH_GUATEMALA 0x04
-+# endif
-+# ifndef SUBLANG_SPANISH_COSTA_RICA
-+# define SUBLANG_SPANISH_COSTA_RICA 0x05
-+# endif
-+# ifndef SUBLANG_SPANISH_PANAMA
-+# define SUBLANG_SPANISH_PANAMA 0x06
-+# endif
-+# ifndef SUBLANG_SPANISH_DOMINICAN_REPUBLIC
-+# define SUBLANG_SPANISH_DOMINICAN_REPUBLIC 0x07
-+# endif
-+# ifndef SUBLANG_SPANISH_VENEZUELA
-+# define SUBLANG_SPANISH_VENEZUELA 0x08
-+# endif
-+# ifndef SUBLANG_SPANISH_COLOMBIA
-+# define SUBLANG_SPANISH_COLOMBIA 0x09
-+# endif
-+# ifndef SUBLANG_SPANISH_PERU
-+# define SUBLANG_SPANISH_PERU 0x0a
-+# endif
-+# ifndef SUBLANG_SPANISH_ARGENTINA
-+# define SUBLANG_SPANISH_ARGENTINA 0x0b
-+# endif
-+# ifndef SUBLANG_SPANISH_ECUADOR
-+# define SUBLANG_SPANISH_ECUADOR 0x0c
-+# endif
-+# ifndef SUBLANG_SPANISH_CHILE
-+# define SUBLANG_SPANISH_CHILE 0x0d
-+# endif
-+# ifndef SUBLANG_SPANISH_URUGUAY
-+# define SUBLANG_SPANISH_URUGUAY 0x0e
-+# endif
-+# ifndef SUBLANG_SPANISH_PARAGUAY
-+# define SUBLANG_SPANISH_PARAGUAY 0x0f
-+# endif
-+# ifndef SUBLANG_SPANISH_BOLIVIA
-+# define SUBLANG_SPANISH_BOLIVIA 0x10
-+# endif
-+# ifndef SUBLANG_SPANISH_EL_SALVADOR
-+# define SUBLANG_SPANISH_EL_SALVADOR 0x11
-+# endif
-+# ifndef SUBLANG_SPANISH_HONDURAS
-+# define SUBLANG_SPANISH_HONDURAS 0x12
-+# endif
-+# ifndef SUBLANG_SPANISH_NICARAGUA
-+# define SUBLANG_SPANISH_NICARAGUA 0x13
-+# endif
-+# ifndef SUBLANG_SPANISH_PUERTO_RICO
-+# define SUBLANG_SPANISH_PUERTO_RICO 0x14
-+# endif
-+# ifndef SUBLANG_SWEDISH_FINLAND
-+# define SUBLANG_SWEDISH_FINLAND 0x02
-+# endif
-+# ifndef SUBLANG_TAMAZIGHT_ARABIC
-+# define SUBLANG_TAMAZIGHT_ARABIC 0x01
-+# endif
-+# ifndef SUBLANG_TAMAZIGHT_LATIN
-+# define SUBLANG_TAMAZIGHT_LATIN 0x02
-+# endif
-+# ifndef SUBLANG_TIGRINYA_ETHIOPIA
-+# define SUBLANG_TIGRINYA_ETHIOPIA 0x00
-+# endif
-+# ifndef SUBLANG_TIGRINYA_ERITREA
-+# define SUBLANG_TIGRINYA_ERITREA 0x01
-+# endif
-+# ifndef SUBLANG_URDU_PAKISTAN
-+# define SUBLANG_URDU_PAKISTAN 0x01
-+# endif
-+# ifndef SUBLANG_URDU_INDIA
-+# define SUBLANG_URDU_INDIA 0x02
-+# endif
-+# ifndef SUBLANG_UZBEK_LATIN
-+# define SUBLANG_UZBEK_LATIN 0x01
-+# endif
-+# ifndef SUBLANG_UZBEK_CYRILLIC
-+# define SUBLANG_UZBEK_CYRILLIC 0x02
-+# endif
-+#endif
-+
-+/* XPG3 defines the result of 'setlocale (category, NULL)' as:
-+ "Directs 'setlocale()' to query 'category' and return the current
-+ setting of 'local'."
-+ However it does not specify the exact format. Neither do SUSV2 and
-+ ISO C 99. So we can use this feature only on selected systems (e.g.
-+ those using GNU C Library). */
-+#if defined _LIBC || (defined __GNU_LIBRARY__ && __GNU_LIBRARY__ >= 2)
-+# define HAVE_LOCALE_NULL
-+#endif
-+
-+/* Determine the current locale's name, and canonicalize it into XPG syntax
-+ language[_territory[.codeset]][@modifier]
-+ The codeset part in the result is not reliable; the locale_charset()
-+ should be used for codeset information instead.
-+ The result must not be freed; it is statically allocated. */
-+
-+const char *
-+_nl_locale_name (int category, const char *categoryname)
-+{
-+ const char *retval;
-+
-+#ifndef WIN32
-+
-+ /* Use the POSIX methods of looking to 'LC_ALL', 'LC_xxx', and 'LANG'.
-+ On some systems this can be done by the 'setlocale' function itself. */
-+# if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES && defined HAVE_LOCALE_NULL
-+ retval = setlocale (category, NULL);
-+# else
-+ /* Setting of LC_ALL overwrites all other. */
-+ retval = getenv ("LC_ALL");
-+ if (retval == NULL || retval[0] == '\0')
-+ {
-+ /* Next comes the name of the desired category. */
-+ retval = getenv (categoryname);
-+ if (retval == NULL || retval[0] == '\0')
-+ {
-+ /* Last possibility is the LANG environment variable. */
-+ retval = getenv ("LANG");
-+ if (retval == NULL || retval[0] == '\0')
-+ /* We use C as the default domain. POSIX says this is
-+ implementation defined. */
-+ retval = "C";
-+ }
-+ }
-+# endif
-+
-+ return retval;
-+
-+#else /* WIN32 */
-+
-+ /* Return an XPG style locale name language[_territory][@modifier].
-+ Don't even bother determining the codeset; it's not useful in this
-+ context, because message catalogs are not specific to a single
-+ codeset. */
-+
-+ LCID lcid;
-+ LANGID langid;
-+ int primary, sub;
-+
-+ /* Let the user override the system settings through environment
-+ variables, as on POSIX systems. */
-+ retval = getenv ("LC_ALL");
-+ if (retval != NULL && retval[0] != '\0')
-+ return retval;
-+ retval = getenv (categoryname);
-+ if (retval != NULL && retval[0] != '\0')
-+ return retval;
-+ retval = getenv ("LANG");
-+ if (retval != NULL && retval[0] != '\0')
-+ return retval;
-+
-+ /* Use native Win32 API locale ID. */
-+ lcid = GetThreadLocale ();
-+
-+ /* Strip off the sorting rules, keep only the language part. */
-+ langid = LANGIDFROMLCID (lcid);
-+
-+ /* Split into language and territory part. */
-+ primary = PRIMARYLANGID (langid);
-+ sub = SUBLANGID (langid);
-+
-+ /* Dispatch on language.
-+ See also http://www.unicode.org/unicode/onlinedat/languages.html .
-+ For details about languages, see http://www.ethnologue.com/ . */
-+ switch (primary)
-+ {
-+ case LANG_AFRIKAANS: return "af_ZA";
-+ case LANG_ALBANIAN: return "sq_AL";
-+ case LANG_AMHARIC: return "am_ET";
-+ case LANG_ARABIC:
-+ switch (sub)
-+ {
-+ case SUBLANG_ARABIC_SAUDI_ARABIA: return "ar_SA";
-+ case SUBLANG_ARABIC_IRAQ: return "ar_IQ";
-+ case SUBLANG_ARABIC_EGYPT: return "ar_EG";
-+ case SUBLANG_ARABIC_LIBYA: return "ar_LY";
-+ case SUBLANG_ARABIC_ALGERIA: return "ar_DZ";
-+ case SUBLANG_ARABIC_MOROCCO: return "ar_MA";
-+ case SUBLANG_ARABIC_TUNISIA: return "ar_TN";
-+ case SUBLANG_ARABIC_OMAN: return "ar_OM";
-+ case SUBLANG_ARABIC_YEMEN: return "ar_YE";
-+ case SUBLANG_ARABIC_SYRIA: return "ar_SY";
-+ case SUBLANG_ARABIC_JORDAN: return "ar_JO";
-+ case SUBLANG_ARABIC_LEBANON: return "ar_LB";
-+ case SUBLANG_ARABIC_KUWAIT: return "ar_KW";
-+ case SUBLANG_ARABIC_UAE: return "ar_AE";
-+ case SUBLANG_ARABIC_BAHRAIN: return "ar_BH";
-+ case SUBLANG_ARABIC_QATAR: return "ar_QA";
-+ }
-+ return "ar";
-+ case LANG_ARMENIAN: return "hy_AM";
-+ case LANG_ASSAMESE: return "as_IN";
-+ case LANG_AZERI:
-+ switch (sub)
-+ {
-+ /* FIXME: Adjust this when Azerbaijani locales appear on Unix. */
-+ case SUBLANG_AZERI_LATIN: return "az_AZ@latin";
-+ case SUBLANG_AZERI_CYRILLIC: return "az_AZ@cyrillic";
-+ }
-+ return "az";
-+ case LANG_BASQUE:
-+ return "eu"; /* Ambiguous: could be "eu_ES" or "eu_FR". */
-+ case LANG_BELARUSIAN: return "be_BY";
-+ case LANG_BENGALI:
-+ switch (sub)
-+ {
-+ case SUBLANG_BENGALI_INDIA: return "bn_IN";
-+ case SUBLANG_BENGALI_BANGLADESH: return "bn_BD";
-+ }
-+ return "bn";
-+ case LANG_BULGARIAN: return "bg_BG";
-+ case LANG_BURMESE: return "my_MM";
-+ case LANG_CAMBODIAN: return "km_KH";
-+ case LANG_CATALAN: return "ca_ES";
-+ case LANG_CHEROKEE: return "chr_US";
-+ case LANG_CHINESE:
-+ switch (sub)
-+ {
-+ case SUBLANG_CHINESE_TRADITIONAL: return "zh_TW";
-+ case SUBLANG_CHINESE_SIMPLIFIED: return "zh_CN";
-+ case SUBLANG_CHINESE_HONGKONG: return "zh_HK";
-+ case SUBLANG_CHINESE_SINGAPORE: return "zh_SG";
-+ case SUBLANG_CHINESE_MACAU: return "zh_MO";
-+ }
-+ return "zh";
-+ case LANG_CROATIAN: /* LANG_CROATIAN == LANG_SERBIAN
-+ * What used to be called Serbo-Croatian
-+ * should really now be two separate
-+ * languages because of political reasons.
-+ * (Says tml, who knows nothing about Serbian
-+ * or Croatian.)
-+ * (I can feel those flames coming already.)
-+ */
-+ switch (sub)
-+ {
-+ case SUBLANG_DEFAULT: return "hr_HR";
-+ case SUBLANG_SERBIAN_LATIN: return "sr_CS";
-+ case SUBLANG_SERBIAN_CYRILLIC: return "sr_CS@cyrillic";
-+ }
-+ return "hr";
-+ case LANG_CZECH: return "cs_CZ";
-+ case LANG_DANISH: return "da_DK";
-+ case LANG_DIVEHI: return "dv_MV";
-+ case LANG_DUTCH:
-+ switch (sub)
-+ {
-+ case SUBLANG_DUTCH: return "nl_NL";
-+ case SUBLANG_DUTCH_BELGIAN: /* FLEMISH, VLAAMS */ return "nl_BE";
-+ }
-+ return "nl";
-+ case LANG_EDO: return "bin_NG";
-+ case LANG_ENGLISH:
-+ switch (sub)
-+ {
-+ /* SUBLANG_ENGLISH_US == SUBLANG_DEFAULT. Heh. I thought
-+ * English was the language spoken in England.
-+ * Oh well.
-+ */
-+ case SUBLANG_ENGLISH_US: return "en_US";
-+ case SUBLANG_ENGLISH_UK: return "en_GB";
-+ case SUBLANG_ENGLISH_AUS: return "en_AU";
-+ case SUBLANG_ENGLISH_CAN: return "en_CA";
-+ case SUBLANG_ENGLISH_NZ: return "en_NZ";
-+ case SUBLANG_ENGLISH_EIRE: return "en_IE";
-+ case SUBLANG_ENGLISH_SOUTH_AFRICA: return "en_ZA";
-+ case SUBLANG_ENGLISH_JAMAICA: return "en_JM";
-+ case SUBLANG_ENGLISH_CARIBBEAN: return "en_GD"; /* Grenada? */
-+ case SUBLANG_ENGLISH_BELIZE: return "en_BZ";
-+ case SUBLANG_ENGLISH_TRINIDAD: return "en_TT";
-+ case SUBLANG_ENGLISH_ZIMBABWE: return "en_ZW";
-+ case SUBLANG_ENGLISH_PHILIPPINES: return "en_PH";
-+ case SUBLANG_ENGLISH_INDONESIA: return "en_ID";
-+ case SUBLANG_ENGLISH_HONGKONG: return "en_HK";
-+ case SUBLANG_ENGLISH_INDIA: return "en_IN";
-+ case SUBLANG_ENGLISH_MALAYSIA: return "en_MY";
-+ case SUBLANG_ENGLISH_SINGAPORE: return "en_SG";
-+ }
-+ return "en";
-+ case LANG_ESTONIAN: return "et_EE";
-+ case LANG_FAEROESE: return "fo_FO";
-+ case LANG_FARSI: return "fa_IR";
-+ case LANG_FINNISH: return "fi_FI";
-+ case LANG_FRENCH:
-+ switch (sub)
-+ {
-+ case SUBLANG_FRENCH: return "fr_FR";
-+ case SUBLANG_FRENCH_BELGIAN: /* WALLOON */ return "fr_BE";
-+ case SUBLANG_FRENCH_CANADIAN: return "fr_CA";
-+ case SUBLANG_FRENCH_SWISS: return "fr_CH";
-+ case SUBLANG_FRENCH_LUXEMBOURG: return "fr_LU";
-+ case SUBLANG_FRENCH_MONACO: return "fr_MC";
-+ case SUBLANG_FRENCH_WESTINDIES: return "fr"; /* Caribbean? */
-+ case SUBLANG_FRENCH_REUNION: return "fr_RE";
-+ case SUBLANG_FRENCH_CONGO: return "fr_CG";
-+ case SUBLANG_FRENCH_SENEGAL: return "fr_SN";
-+ case SUBLANG_FRENCH_CAMEROON: return "fr_CM";
-+ case SUBLANG_FRENCH_COTEDIVOIRE: return "fr_CI";
-+ case SUBLANG_FRENCH_MALI: return "fr_ML";
-+ case SUBLANG_FRENCH_MOROCCO: return "fr_MA";
-+ case SUBLANG_FRENCH_HAITI: return "fr_HT";
-+ }
-+ return "fr";
-+ case LANG_FRISIAN: return "fy_NL";
-+ case LANG_FULFULDE:
-+ /* Spoken in Nigeria, Guinea, Senegal, Mali, Niger, Cameroon, Benin. */
-+ return "ff_NG";
-+ case LANG_GAELIC:
-+ switch (sub)
-+ {
-+ case 0x01: /* SCOTTISH */ return "gd_GB";
-+ case 0x02: /* IRISH */ return "ga_IE";
-+ }
-+ return "C";
-+ case LANG_GALICIAN: return "gl_ES";
-+ case LANG_GEORGIAN: return "ka_GE";
-+ case LANG_GERMAN:
-+ switch (sub)
-+ {
-+ case SUBLANG_GERMAN: return "de_DE";
-+ case SUBLANG_GERMAN_SWISS: return "de_CH";
-+ case SUBLANG_GERMAN_AUSTRIAN: return "de_AT";
-+ case SUBLANG_GERMAN_LUXEMBOURG: return "de_LU";
-+ case SUBLANG_GERMAN_LIECHTENSTEIN: return "de_LI";
-+ }
-+ return "de";
-+ case LANG_GREEK: return "el_GR";
-+ case LANG_GUARANI: return "gn_PY";
-+ case LANG_GUJARATI: return "gu_IN";
-+ case LANG_HAUSA: return "ha_NG";
-+ case LANG_HAWAIIAN:
-+ /* FIXME: Do they mean Hawaiian ("haw_US", 1000 speakers)
-+ or Hawaii Creole English ("cpe_US", 600000 speakers)? */
-+ return "cpe_US";
-+ case LANG_HEBREW: return "he_IL";
-+ case LANG_HINDI: return "hi_IN";
-+ case LANG_HUNGARIAN: return "hu_HU";
-+ case LANG_IBIBIO: return "nic_NG";
-+ case LANG_ICELANDIC: return "is_IS";
-+ case LANG_IGBO: return "ig_NG";
-+ case LANG_INDONESIAN: return "id_ID";
-+ case LANG_INUKTITUT: return "iu_CA";
-+ case LANG_ITALIAN:
-+ switch (sub)
-+ {
-+ case SUBLANG_ITALIAN: return "it_IT";
-+ case SUBLANG_ITALIAN_SWISS: return "it_CH";
-+ }
-+ return "it";
-+ case LANG_JAPANESE: return "ja_JP";
-+ case LANG_KANNADA: return "kn_IN";
-+ case LANG_KANURI: return "kr_NG";
-+ case LANG_KASHMIRI:
-+ switch (sub)
-+ {
-+ case SUBLANG_DEFAULT: return "ks_PK";
-+ case SUBLANG_KASHMIRI_INDIA: return "ks_IN";
-+ }
-+ return "ks";
-+ case LANG_KAZAK: return "kk_KZ";
-+ case LANG_KONKANI:
-+ /* FIXME: Adjust this when such locales appear on Unix. */
-+ return "kok_IN";
-+ case LANG_KOREAN: return "ko_KR";
-+ case LANG_KYRGYZ: return "ky_KG";
-+ case LANG_LAO: return "lo_LA";
-+ case LANG_LATIN: return "la_VA";
-+ case LANG_LATVIAN: return "lv_LV";
-+ case LANG_LITHUANIAN: return "lt_LT";
-+ case LANG_MACEDONIAN: return "mk_MK";
-+ case LANG_MALAY:
-+ switch (sub)
-+ {
-+ case SUBLANG_MALAY_MALAYSIA: return "ms_MY";
-+ case SUBLANG_MALAY_BRUNEI_DARUSSALAM: return "ms_BN";
-+ }
-+ return "ms";
-+ case LANG_MALAYALAM: return "ml_IN";
-+ case LANG_MALTESE: return "mt_MT";
-+ case LANG_MANIPURI:
-+ /* FIXME: Adjust this when such locales appear on Unix. */
-+ return "mni_IN";
-+ case LANG_MARATHI: return "mr_IN";
-+ case LANG_MONGOLIAN:
-+ return "mn"; /* Ambiguous: could be "mn_CN" or "mn_MN". */
-+ case LANG_NEPALI:
-+ switch (sub)
-+ {
-+ case SUBLANG_DEFAULT: return "ne_NP";
-+ case SUBLANG_NEPALI_INDIA: return "ne_IN";
-+ }
-+ return "ne";
-+ case LANG_NORWEGIAN:
-+ switch (sub)
-+ {
-+ case SUBLANG_NORWEGIAN_BOKMAL: return "no_NO";
-+ case SUBLANG_NORWEGIAN_NYNORSK: return "nn_NO";
-+ }
-+ return "no";
-+ case LANG_ORIYA: return "or_IN";
-+ case LANG_OROMO: return "om_ET";
-+ case LANG_PAPIAMENTU: return "pap_AN";
-+ case LANG_PASHTO:
-+ return "ps"; /* Ambiguous: could be "ps_PK" or "ps_AF". */
-+ case LANG_POLISH: return "pl_PL";
-+ case LANG_PORTUGUESE:
-+ switch (sub)
-+ {
-+ case SUBLANG_PORTUGUESE: return "pt_PT";
-+ /* Hmm. SUBLANG_PORTUGUESE_BRAZILIAN == SUBLANG_DEFAULT.
-+ Same phenomenon as SUBLANG_ENGLISH_US == SUBLANG_DEFAULT. */
-+ case SUBLANG_PORTUGUESE_BRAZILIAN: return "pt_BR";
-+ }
-+ return "pt";
-+ case LANG_PUNJABI:
-+ switch (sub)
-+ {
-+ case SUBLANG_PUNJABI_INDIA: return "pa_IN"; /* Gurmukhi script */
-+ case SUBLANG_PUNJABI_PAKISTAN: return "pa_PK"; /* Arabic script */
-+ }
-+ return "pa";
-+ case LANG_RHAETO_ROMANCE: return "rm_CH";
-+ case LANG_ROMANIAN:
-+ switch (sub)
-+ {
-+ case SUBLANG_ROMANIAN_ROMANIA: return "ro_RO";
-+ case SUBLANG_ROMANIAN_MOLDOVA: return "ro_MD";
-+ }
-+ return "ro";
-+ case LANG_RUSSIAN:
-+ return "ru"; /* Ambiguous: could be "ru_RU" or "ru_UA" or "ru_MD". */
-+ case LANG_SAAMI: /* actually Northern Sami */ return "se_NO";
-+ case LANG_SANSKRIT: return "sa_IN";
-+ case LANG_SINDHI:
-+ switch (sub)
-+ {
-+ case SUBLANG_SINDHI_INDIA: return "sd_IN";
-+ case SUBLANG_SINDHI_PAKISTAN: return "sd_PK";
-+ }
-+ return "sd";
-+ case LANG_SINHALESE: return "si_LK";
-+ case LANG_SLOVAK: return "sk_SK";
-+ case LANG_SLOVENIAN: return "sl_SI";
-+ case LANG_SOMALI: return "so_SO";
-+ case LANG_SORBIAN:
-+ /* FIXME: Adjust this when such locales appear on Unix. */
-+ return "wen_DE";
-+ case LANG_SPANISH:
-+ switch (sub)
-+ {
-+ case SUBLANG_SPANISH: return "es_ES";
-+ case SUBLANG_SPANISH_MEXICAN: return "es_MX";
-+ case SUBLANG_SPANISH_MODERN:
-+ return "es_ES@modern"; /* not seen on Unix */
-+ case SUBLANG_SPANISH_GUATEMALA: return "es_GT";
-+ case SUBLANG_SPANISH_COSTA_RICA: return "es_CR";
-+ case SUBLANG_SPANISH_PANAMA: return "es_PA";
-+ case SUBLANG_SPANISH_DOMINICAN_REPUBLIC: return "es_DO";
-+ case SUBLANG_SPANISH_VENEZUELA: return "es_VE";
-+ case SUBLANG_SPANISH_COLOMBIA: return "es_CO";
-+ case SUBLANG_SPANISH_PERU: return "es_PE";
-+ case SUBLANG_SPANISH_ARGENTINA: return "es_AR";
-+ case SUBLANG_SPANISH_ECUADOR: return "es_EC";
-+ case SUBLANG_SPANISH_CHILE: return "es_CL";
-+ case SUBLANG_SPANISH_URUGUAY: return "es_UY";
-+ case SUBLANG_SPANISH_PARAGUAY: return "es_PY";
-+ case SUBLANG_SPANISH_BOLIVIA: return "es_BO";
-+ case SUBLANG_SPANISH_EL_SALVADOR: return "es_SV";
-+ case SUBLANG_SPANISH_HONDURAS: return "es_HN";
-+ case SUBLANG_SPANISH_NICARAGUA: return "es_NI";
-+ case SUBLANG_SPANISH_PUERTO_RICO: return "es_PR";
-+ }
-+ return "es";
-+ case LANG_SUTU: return "bnt_TZ"; /* or "st_LS" or "nso_ZA"? */
-+ case LANG_SWAHILI: return "sw_KE";
-+ case LANG_SWEDISH:
-+ switch (sub)
-+ {
-+ case SUBLANG_DEFAULT: return "sv_SE";
-+ case SUBLANG_SWEDISH_FINLAND: return "sv_FI";
-+ }
-+ return "sv";
-+ case LANG_SYRIAC: return "syr_TR"; /* An extinct language. */
-+ case LANG_TAGALOG: return "tl_PH";
-+ case LANG_TAJIK: return "tg_TJ";
-+ case LANG_TAMAZIGHT:
-+ switch (sub)
-+ {
-+ /* FIXME: Adjust this when Tamazight locales appear on Unix. */
-+ case SUBLANG_TAMAZIGHT_ARABIC: return "ber_MA@arabic";
-+ case SUBLANG_TAMAZIGHT_LATIN: return "ber_MA@latin";
-+ }
-+ return "ber_MA";
-+ case LANG_TAMIL:
-+ return "ta"; /* Ambiguous: could be "ta_IN" or "ta_LK" or "ta_SG". */
-+ case LANG_TATAR: return "tt_RU";
-+ case LANG_TELUGU: return "te_IN";
-+ case LANG_THAI: return "th_TH";
-+ case LANG_TIBETAN: return "bo_CN";
-+ case LANG_TIGRINYA:
-+ switch (sub)
-+ {
-+ case SUBLANG_TIGRINYA_ETHIOPIA: return "ti_ET";
-+ case SUBLANG_TIGRINYA_ERITREA: return "ti_ER";
-+ }
-+ return "ti";
-+ case LANG_TSONGA: return "ts_ZA";
-+ case LANG_TSWANA: return "tn_BW";
-+ case LANG_TURKISH: return "tr_TR";
-+ case LANG_TURKMEN: return "tk_TM";
-+ case LANG_UKRAINIAN: return "uk_UA";
-+ case LANG_URDU:
-+ switch (sub)
-+ {
-+ case SUBLANG_URDU_PAKISTAN: return "ur_PK";
-+ case SUBLANG_URDU_INDIA: return "ur_IN";
-+ }
-+ return "ur";
-+ case LANG_UZBEK:
-+ switch (sub)
-+ {
-+ case SUBLANG_UZBEK_LATIN: return "uz_UZ";
-+ case SUBLANG_UZBEK_CYRILLIC: return "uz_UZ@cyrillic";
-+ }
-+ return "uz";
-+ case LANG_VENDA: return "ve_ZA";
-+ case LANG_VIETNAMESE: return "vi_VN";
-+ case LANG_WELSH: return "cy_GB";
-+ case LANG_XHOSA: return "xh_ZA";
-+ case LANG_YI: return "sit_CN";
-+ case LANG_YIDDISH: return "yi_IL";
-+ case LANG_YORUBA: return "yo_NG";
-+ case LANG_ZULU: return "zu_ZA";
-+ default: return "C";
-+ }
-+
-+#endif
-+}
---- lrzsz-0.12.20.safe/intl/log.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/log.c 2004-09-12 14:40:34.515723768 -0400
-@@ -0,0 +1,98 @@
-+/* Log file output.
-+ Copyright (C) 2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+/* Written by Bruno Haible <bruno@clisp.org>. */
-+
-+#ifdef HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <string.h>
-+
-+/* Print an ASCII string with quotes and escape sequences where needed. */
-+static void
-+print_escaped (FILE *stream, const char *str)
-+{
-+ putc ('"', stream);
-+ for (; *str != '\0'; str++)
-+ if (*str == '\n')
-+ {
-+ fputs ("\\n\"", stream);
-+ if (str[1] == '\0')
-+ return;
-+ fputs ("\n\"", stream);
-+ }
-+ else
-+ {
-+ if (*str == '"' || *str == '\\')
-+ putc ('\\', stream);
-+ putc (*str, stream);
-+ }
-+ putc ('"', stream);
-+}
-+
-+/* Add to the log file an entry denoting a failed translation. */
-+void
-+_nl_log_untranslated (const char *logfilename, const char *domainname,
-+ const char *msgid1, const char *msgid2, int plural)
-+{
-+ static char *last_logfilename = NULL;
-+ static FILE *last_logfile = NULL;
-+ FILE *logfile;
-+
-+ /* Can we reuse the last opened logfile? */
-+ if (last_logfilename == NULL || strcmp (logfilename, last_logfilename) != 0)
-+ {
-+ /* Close the last used logfile. */
-+ if (last_logfilename != NULL)
-+ {
-+ if (last_logfile != NULL)
-+ {
-+ fclose (last_logfile);
-+ last_logfile = NULL;
-+ }
-+ free (last_logfilename);
-+ last_logfilename = NULL;
-+ }
-+ /* Open the logfile. */
-+ last_logfilename = (char *) malloc (strlen (logfilename) + 1);
-+ if (last_logfilename == NULL)
-+ return;
-+ strcpy (last_logfilename, logfilename);
-+ last_logfile = fopen (logfilename, "a");
-+ if (last_logfile == NULL)
-+ return;
-+ }
-+ logfile = last_logfile;
-+
-+ fprintf (logfile, "domain ");
-+ print_escaped (logfile, domainname);
-+ fprintf (logfile, "\nmsgid ");
-+ print_escaped (logfile, msgid1);
-+ if (plural)
-+ {
-+ fprintf (logfile, "\nmsgid_plural ");
-+ print_escaped (logfile, msgid2);
-+ fprintf (logfile, "\nmsgstr[0] \"\"\n");
-+ }
-+ else
-+ fprintf (logfile, "\nmsgstr \"\"\n");
-+ putc ('\n', logfile);
-+}
---- lrzsz-0.12.20.safe/intl/Makefile.in 1998-04-26 09:22:35.000000000 -0400
-+++ lrzsz-0.12.20/intl/Makefile.in 2004-09-12 14:40:34.521722856 -0400
-@@ -1,19 +1,20 @@
--# Makefile for directory with message catalog handling in GNU NLS Utilities.
--# Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-+# Makefile for directory with message catalog handling library of GNU gettext
-+# Copyright (C) 1995-1998, 2000-2003 Free Software Foundation, Inc.
- #
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
-+# This program is free software; you can redistribute it and/or modify it
-+# under the terms of the GNU Library General Public License as published
-+# by the Free Software Foundation; either version 2, or (at your option)
- # any later version.
- #
- # This program is distributed in the hope that it will be useful,
- # but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# Library General Public License for more details.
- #
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+# You should have received a copy of the GNU Library General Public
-+# License along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+# USA.
-
- PACKAGE = @PACKAGE@
- VERSION = @VERSION@
-@@ -23,118 +24,341 @@
- srcdir = @srcdir@
- top_srcdir = @top_srcdir@
- top_builddir = ..
--VPATH = @srcdir@
-+#VPATH = $(srcdir)
-
- prefix = @prefix@
- exec_prefix = @exec_prefix@
- transform = @program_transform_name@
--libdir = $(exec_prefix)/lib
--includedir = $(prefix)/include
--datadir = $(prefix)/@DATADIRNAME@
-+libdir = @libdir@
-+includedir = @includedir@
-+datadir = @datadir@
- localedir = $(datadir)/locale
--gnulocaledir = $(prefix)/share/locale
--gettextsrcdir = @datadir@/gettext/intl
--aliaspath = $(localedir):.
-+gettextsrcdir = $(datadir)/gettext/intl
-+aliaspath = $(localedir)
- subdir = intl
-
- INSTALL = @INSTALL@
- INSTALL_DATA = @INSTALL_DATA@
- MKINSTALLDIRS = @MKINSTALLDIRS@
-+mkinstalldirs = $(SHELL) $(MKINSTALLDIRS)
-
--l = @l@
-+l = @INTL_LIBTOOL_SUFFIX_PREFIX@
-
- AR = ar
- CC = @CC@
- LIBTOOL = @LIBTOOL@
- RANLIB = @RANLIB@
-+YACC = @INTLBISON@ -y -d
-+YFLAGS = --name-prefix=__gettext
-
--DEFS = -DLOCALEDIR=\"$(localedir)\" -DGNULOCALEDIR=\"$(gnulocaledir)\" \
---DLOCALE_ALIAS_PATH=\"$(aliaspath)\" @DEFS@
-+DEFS = -DLOCALEDIR=\"$(localedir)\" -DLOCALE_ALIAS_PATH=\"$(aliaspath)\" \
-+-DLIBDIR=\"$(libdir)\" -DIN_LIBINTL \
-+-DENABLE_RELOCATABLE=1 -DIN_LIBRARY -DINSTALLDIR=\"$(libdir)\" -DNO_XMALLOC \
-+-Dset_relocation_prefix=libintl_set_relocation_prefix \
-+-Drelocate=libintl_relocate \
-+-DDEPENDS_ON_LIBICONV=1 @DEFS@
- CPPFLAGS = @CPPFLAGS@
- CFLAGS = @CFLAGS@
- LDFLAGS = @LDFLAGS@
-+LIBS = @LIBS@
-
- COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS)
-
--HEADERS = $(COMHDRS) libgettext.h loadinfo.h
--COMHDRS = gettext.h gettextP.h hash-string.h
--SOURCES = $(COMSRCS) intl-compat.c cat-compat.c
--COMSRCS = bindtextdom.c dcgettext.c dgettext.c gettext.c \
--finddomain.c loadmsgcat.c localealias.c textdomain.c l10nflist.c \
--explodename.c
--OBJECTS = @INTLOBJS@ bindtextdom.$lo dcgettext.$lo dgettext.$lo gettext.$lo \
--finddomain.$lo loadmsgcat.$lo localealias.$lo textdomain.$lo l10nflist.$lo \
--explodename.$lo
--CATOBJS = cat-compat.$lo ../po/cat-id-tbl.$lo
--GETTOBJS = intl-compat.$lo
--DISTFILES.common = ChangeLog Makefile.in linux-msg.sed po2tbl.sed.in \
--xopen-msg.sed $(HEADERS) $(SOURCES)
-+HEADERS = \
-+ gmo.h \
-+ gettextP.h \
-+ hash-string.h \
-+ loadinfo.h \
-+ plural-exp.h \
-+ eval-plural.h \
-+ localcharset.h \
-+ relocatable.h \
-+ xsize.h \
-+ printf-args.h printf-args.c \
-+ printf-parse.h wprintf-parse.h printf-parse.c \
-+ vasnprintf.h vasnwprintf.h vasnprintf.c \
-+ os2compat.h \
-+ libgnuintl.h.in
-+SOURCES = \
-+ bindtextdom.c \
-+ dcgettext.c \
-+ dgettext.c \
-+ gettext.c \
-+ finddomain.c \
-+ loadmsgcat.c \
-+ localealias.c \
-+ textdomain.c \
-+ l10nflist.c \
-+ explodename.c \
-+ dcigettext.c \
-+ dcngettext.c \
-+ dngettext.c \
-+ ngettext.c \
-+ plural.y \
-+ plural-exp.c \
-+ localcharset.c \
-+ relocatable.c \
-+ localename.c \
-+ log.c \
-+ printf.c \
-+ osdep.c \
-+ os2compat.c \
-+ intl-compat.c
-+OBJECTS = \
-+ bindtextdom.$lo \
-+ dcgettext.$lo \
-+ dgettext.$lo \
-+ gettext.$lo \
-+ finddomain.$lo \
-+ loadmsgcat.$lo \
-+ localealias.$lo \
-+ textdomain.$lo \
-+ l10nflist.$lo \
-+ explodename.$lo \
-+ dcigettext.$lo \
-+ dcngettext.$lo \
-+ dngettext.$lo \
-+ ngettext.$lo \
-+ plural.$lo \
-+ plural-exp.$lo \
-+ localcharset.$lo \
-+ relocatable.$lo \
-+ localename.$lo \
-+ log.$lo \
-+ printf.$lo \
-+ osdep.$lo \
-+ intl-compat.$lo
-+DISTFILES.common = Makefile.in \
-+config.charset locale.alias ref-add.sin ref-del.sin $(HEADERS) $(SOURCES)
-+DISTFILES.generated = plural.c
- DISTFILES.normal = VERSION
--DISTFILES.gettext = libintl.glibc intlh.inst.in
-+DISTFILES.gettext = COPYING.LIB-2.0 COPYING.LIB-2.1 libintl.glibc \
-+libgnuintl.h_vms Makefile.vms \
-+libgnuintl.h.msvc-static libgnuintl.h.msvc-shared README.woe32 Makefile.msvc
-+DISTFILES.obsolete = xopen-msg.sed linux-msg.sed po2tbl.sed.in cat-compat.c \
-+COPYING.LIB-2 gettext.h libgettext.h plural-eval.c libgnuintl.h
-+
-+all: all-@USE_INCLUDED_LIBINTL@
-+all-yes: libintl.$la libintl.h charset.alias ref-add.sed ref-del.sed
-+all-no: all-no-@BUILD_INCLUDED_LIBINTL@
-+all-no-yes: libgnuintl.$la
-+all-no-no:
-+
-+libintl.a libgnuintl.a: $(OBJECTS)
-+ rm -f $@
-+ $(AR) cru $@ $(OBJECTS)
-+ $(RANLIB) $@
-+
-+libintl.la libgnuintl.la: $(OBJECTS)
-+ $(LIBTOOL) --mode=link \
-+ $(CC) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS) $(LDFLAGS) -o $@ \
-+ $(OBJECTS) @LTLIBICONV@ $(LIBS) -lc \
-+ -version-info $(LTV_CURRENT):$(LTV_REVISION):$(LTV_AGE) \
-+ -rpath $(libdir) \
-+ -no-undefined
-+
-+# Libtool's library version information for libintl.
-+# Before making a gettext release, the gettext maintainer must change this
-+# according to the libtool documentation, section "Library interface versions".
-+# Maintainers of other packages that include the intl directory must *not*
-+# change these values.
-+LTV_CURRENT=7
-+LTV_REVISION=0
-+LTV_AGE=4
-
- .SUFFIXES:
--.SUFFIXES: .c .o .lo
-+.SUFFIXES: .c .y .o .lo .sin .sed
-+
- .c.o:
- $(COMPILE) $<
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) $<
-
--INCLUDES = -I.. -I. -I$(top_srcdir)/intl -I$(top_srcdir)/lib
-+.y.c:
-+ $(YACC) $(YFLAGS) --output $@ $<
-+ rm -f $*.h
-
--all: all-@USE_INCLUDED_LIBINTL@
-+bindtextdom.lo: $(srcdir)/bindtextdom.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/bindtextdom.c
-+dcgettext.lo: $(srcdir)/dcgettext.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dcgettext.c
-+dgettext.lo: $(srcdir)/dgettext.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dgettext.c
-+gettext.lo: $(srcdir)/gettext.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/gettext.c
-+finddomain.lo: $(srcdir)/finddomain.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/finddomain.c
-+loadmsgcat.lo: $(srcdir)/loadmsgcat.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/loadmsgcat.c
-+localealias.lo: $(srcdir)/localealias.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/localealias.c
-+textdomain.lo: $(srcdir)/textdomain.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/textdomain.c
-+l10nflist.lo: $(srcdir)/l10nflist.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/l10nflist.c
-+explodename.lo: $(srcdir)/explodename.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/explodename.c
-+dcigettext.lo: $(srcdir)/dcigettext.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dcigettext.c
-+dcngettext.lo: $(srcdir)/dcngettext.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dcngettext.c
-+dngettext.lo: $(srcdir)/dngettext.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/dngettext.c
-+ngettext.lo: $(srcdir)/ngettext.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/ngettext.c
-+plural.lo: $(srcdir)/plural.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/plural.c
-+plural-exp.lo: $(srcdir)/plural-exp.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/plural-exp.c
-+localcharset.lo: $(srcdir)/localcharset.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/localcharset.c
-+relocatable.lo: $(srcdir)/relocatable.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/relocatable.c
-+localename.lo: $(srcdir)/localename.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/localename.c
-+log.lo: $(srcdir)/log.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/log.c
-+printf.lo: $(srcdir)/printf.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/printf.c
-+osdep.lo: $(srcdir)/osdep.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/osdep.c
-+intl-compat.lo: $(srcdir)/intl-compat.c
-+ $(LIBTOOL) --mode=compile $(COMPILE) $(srcdir)/intl-compat.c
-
--all-yes: libintl.$la intlh.inst
--all-no:
-+ref-add.sed: $(srcdir)/ref-add.sin
-+ sed -e '/^#/d' -e 's/@''PACKAGE''@/@PACKAGE@/g' $(srcdir)/ref-add.sin > t-ref-add.sed
-+ mv t-ref-add.sed ref-add.sed
-+ref-del.sed: $(srcdir)/ref-del.sin
-+ sed -e '/^#/d' -e 's/@''PACKAGE''@/@PACKAGE@/g' $(srcdir)/ref-del.sin > t-ref-del.sed
-+ mv t-ref-del.sed ref-del.sed
-
--libintl.a: $(OBJECTS)
-- rm -f $@
-- $(AR) cru $@ $(OBJECTS)
-- $(RANLIB) $@
-+INCLUDES = -I. -I$(srcdir) -I..
-
--libintl.la: $(OBJECTS)
-- $(LIBTOOL) --mode=link $(CC) $(LDFLAGS) -o $@ $(OBJECTS) \
-- -version-info 1:0 -rpath $(libdir)
-+libgnuintl.h: $(srcdir)/libgnuintl.h.in
-+ sed -e 's,@''HAVE_POSIX_PRINTF''@,@HAVE_POSIX_PRINTF@,g' \
-+ -e 's,@''HAVE_ASPRINTF''@,@HAVE_ASPRINTF@,g' \
-+ -e 's,@''HAVE_SNPRINTF''@,@HAVE_SNPRINTF@,g' \
-+ -e 's,@''HAVE_WPRINTF''@,@HAVE_WPRINTF@,g' \
-+ < $(srcdir)/libgnuintl.h.in > libgnuintl.h
-
--../po/cat-id-tbl.$lo: ../po/cat-id-tbl.c $(top_srcdir)/po/$(PACKAGE).pot
-- cd ../po && $(MAKE) cat-id-tbl.$lo
-+libintl.h: libgnuintl.h
-+ cp libgnuintl.h libintl.h
-
--check: all
-+charset.alias: $(srcdir)/config.charset
-+ $(SHELL) $(srcdir)/config.charset '@host@' > t-$@
-+ mv t-$@ $@
-
--# This installation goal is only used in GNU gettext. Packages which
--# only use the library should use install instead.
-+check: all
-
- # We must not install the libintl.h/libintl.a files if we are on a
--# system which has the gettext() function in its C library or in a
--# separate library or use the catgets interface. A special case is
--# where configure found a previously installed GNU gettext library.
-+# system which has the GNU gettext() function in its C library or in a
-+# separate library.
- # If you want to use the one which comes with this version of the
- # package, you have to use `configure --with-included-gettext'.
- install: install-exec install-data
- install-exec: all
-- if test "$(PACKAGE)" = "gettext" \
-- && test '@INTLOBJS@' = '$(GETTOBJS)'; then \
-- if test -r $(MKINSTALLDIRS); then \
-- $(MKINSTALLDIRS) $(libdir) $(includedir); \
-- else \
-- $(top_srcdir)/mkinstalldirs $(libdir) $(includedir); \
-+ if { test "$(PACKAGE)" = "gettext-runtime" || test "$(PACKAGE)" = "gettext-tools"; } \
-+ && test '@USE_INCLUDED_LIBINTL@' = yes; then \
-+ $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(includedir); \
-+ $(INSTALL_DATA) libintl.h $(DESTDIR)$(includedir)/libintl.h; \
-+ $(LIBTOOL) --mode=install \
-+ $(INSTALL_DATA) libintl.$la $(DESTDIR)$(libdir)/libintl.$la; \
-+ if test "@RELOCATABLE@" = yes; then \
-+ dependencies=`sed -n -e 's,^dependency_libs=\(.*\),\1,p' < $(DESTDIR)$(libdir)/libintl.la | sed -e "s,^',," -e "s,'\$$,,"`; \
-+ if test -n "$$dependencies"; then \
-+ rm -f $(DESTDIR)$(libdir)/libintl.la; \
-+ fi; \
- fi; \
-- $(INSTALL_DATA) intlh.inst $(includedir)/libintl.h; \
-- $(INSTALL_DATA) libintl.a $(libdir)/libintl.a; \
- else \
- : ; \
- fi
--install-data: all
-- if test "$(PACKAGE)" = "gettext"; then \
-- if test -r $(MKINSTALLDIRS); then \
-- $(MKINSTALLDIRS) $(gettextsrcdir); \
-+ if test "$(PACKAGE)" = "gettext-tools" \
-+ && test '@USE_INCLUDED_LIBINTL@' = no; then \
-+ $(mkinstalldirs) $(DESTDIR)$(libdir); \
-+ $(LIBTOOL) --mode=install \
-+ $(INSTALL_DATA) libgnuintl.$la $(DESTDIR)$(libdir)/libgnuintl.$la; \
-+ rm -f $(DESTDIR)$(libdir)/preloadable_libintl.so; \
-+ $(INSTALL_DATA) $(DESTDIR)$(libdir)/libgnuintl.so $(DESTDIR)$(libdir)/preloadable_libintl.so; \
-+ $(LIBTOOL) --mode=uninstall \
-+ rm -f $(DESTDIR)$(libdir)/libgnuintl.$la; \
-+ else \
-+ : ; \
-+ fi
-+ if test '@USE_INCLUDED_LIBINTL@' = yes; then \
-+ test @GLIBC21@ != no || $(mkinstalldirs) $(DESTDIR)$(libdir); \
-+ temp=$(DESTDIR)$(libdir)/t-charset.alias; \
-+ dest=$(DESTDIR)$(libdir)/charset.alias; \
-+ if test -f $(DESTDIR)$(libdir)/charset.alias; then \
-+ orig=$(DESTDIR)$(libdir)/charset.alias; \
-+ sed -f ref-add.sed $$orig > $$temp; \
-+ $(INSTALL_DATA) $$temp $$dest; \
-+ rm -f $$temp; \
- else \
-- $(top_srcdir)/mkinstalldirs $(gettextsrcdir); \
-+ if test @GLIBC21@ = no; then \
-+ orig=charset.alias; \
-+ sed -f ref-add.sed $$orig > $$temp; \
-+ $(INSTALL_DATA) $$temp $$dest; \
-+ rm -f $$temp; \
-+ fi; \
- fi; \
-- $(INSTALL_DATA) VERSION $(gettextsrcdir)/VERSION; \
-- dists="$(DISTFILES.common)"; \
-+ $(mkinstalldirs) $(DESTDIR)$(localedir); \
-+ test -f $(DESTDIR)$(localedir)/locale.alias \
-+ && orig=$(DESTDIR)$(localedir)/locale.alias \
-+ || orig=$(srcdir)/locale.alias; \
-+ temp=$(DESTDIR)$(localedir)/t-locale.alias; \
-+ dest=$(DESTDIR)$(localedir)/locale.alias; \
-+ sed -f ref-add.sed $$orig > $$temp; \
-+ $(INSTALL_DATA) $$temp $$dest; \
-+ rm -f $$temp; \
-+ else \
-+ : ; \
-+ fi
-+install-data: all
-+ if test "$(PACKAGE)" = "gettext-tools"; then \
-+ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
-+ $(INSTALL_DATA) VERSION $(DESTDIR)$(gettextsrcdir)/VERSION; \
-+ $(INSTALL_DATA) ChangeLog.inst $(DESTDIR)$(gettextsrcdir)/ChangeLog; \
-+ dists="COPYING.LIB-2.0 COPYING.LIB-2.1 $(DISTFILES.common)"; \
- for file in $$dists; do \
-- $(INSTALL_DATA) $(srcdir)/$$file $(gettextsrcdir)/$$file; \
-+ $(INSTALL_DATA) $(srcdir)/$$file \
-+ $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
-+ chmod a+x $(DESTDIR)$(gettextsrcdir)/config.charset; \
-+ dists="$(DISTFILES.generated)"; \
-+ for file in $$dists; do \
-+ if test -f $$file; then dir=.; else dir=$(srcdir); fi; \
-+ $(INSTALL_DATA) $$dir/$$file \
-+ $(DESTDIR)$(gettextsrcdir)/$$file; \
-+ done; \
-+ dists="$(DISTFILES.obsolete)"; \
-+ for file in $$dists; do \
-+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
-+ done; \
-+ else \
-+ : ; \
-+ fi
-+
-+install-strip: install
-+
-+installdirs:
-+ if { test "$(PACKAGE)" = "gettext-runtime" || test "$(PACKAGE)" = "gettext-tools"; } \
-+ && test '@USE_INCLUDED_LIBINTL@' = yes; then \
-+ $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(includedir); \
-+ else \
-+ : ; \
-+ fi
-+ if test "$(PACKAGE)" = "gettext-tools" \
-+ && test '@USE_INCLUDED_LIBINTL@' = no; then \
-+ $(mkinstalldirs) $(DESTDIR)$(libdir); \
-+ else \
-+ : ; \
-+ fi
-+ if test '@USE_INCLUDED_LIBINTL@' = yes; then \
-+ test @GLIBC21@ != no || $(mkinstalldirs) $(DESTDIR)$(libdir); \
-+ $(mkinstalldirs) $(DESTDIR)$(localedir); \
-+ else \
-+ : ; \
-+ fi
-+ if test "$(PACKAGE)" = "gettext-tools"; then \
-+ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
- else \
- : ; \
- fi
-@@ -143,22 +367,76 @@
- installcheck:
-
- uninstall:
-- dists="$(DISTFILES.common)"; \
-- for file in $$dists; do \
-- rm -f $(gettextsrcdir)/$$file; \
-- done
-+ if { test "$(PACKAGE)" = "gettext-runtime" || test "$(PACKAGE)" = "gettext-tools"; } \
-+ && test '@USE_INCLUDED_LIBINTL@' = yes; then \
-+ rm -f $(DESTDIR)$(includedir)/libintl.h; \
-+ $(LIBTOOL) --mode=uninstall \
-+ rm -f $(DESTDIR)$(libdir)/libintl.$la; \
-+ else \
-+ : ; \
-+ fi
-+ if test "$(PACKAGE)" = "gettext-tools" \
-+ && test '@USE_INCLUDED_LIBINTL@' = no; then \
-+ rm -f $(DESTDIR)$(libdir)/preloadable_libintl.so; \
-+ else \
-+ : ; \
-+ fi
-+ if test '@USE_INCLUDED_LIBINTL@' = yes; then \
-+ if test -f $(DESTDIR)$(libdir)/charset.alias; then \
-+ temp=$(DESTDIR)$(libdir)/t-charset.alias; \
-+ dest=$(DESTDIR)$(libdir)/charset.alias; \
-+ sed -f ref-del.sed $$dest > $$temp; \
-+ if grep '^# Packages using this file: $$' $$temp > /dev/null; then \
-+ rm -f $$dest; \
-+ else \
-+ $(INSTALL_DATA) $$temp $$dest; \
-+ fi; \
-+ rm -f $$temp; \
-+ fi; \
-+ if test -f $(DESTDIR)$(localedir)/locale.alias; then \
-+ temp=$(DESTDIR)$(localedir)/t-locale.alias; \
-+ dest=$(DESTDIR)$(localedir)/locale.alias; \
-+ sed -f ref-del.sed $$dest > $$temp; \
-+ if grep '^# Packages using this file: $$' $$temp > /dev/null; then \
-+ rm -f $$dest; \
-+ else \
-+ $(INSTALL_DATA) $$temp $$dest; \
-+ fi; \
-+ rm -f $$temp; \
-+ fi; \
-+ else \
-+ : ; \
-+ fi
-+ if test "$(PACKAGE)" = "gettext-tools"; then \
-+ for file in VERSION ChangeLog COPYING.LIB-2.0 COPYING.LIB-2.1 $(DISTFILES.common) $(DISTFILES.generated); do \
-+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
-+ done; \
-+ else \
-+ : ; \
-+ fi
-
--info dvi:
-+info dvi ps pdf html:
-
--$(OBJECTS): ../config.h libgettext.h
--bindtextdom.$lo finddomain.$lo loadmsgcat.$lo: gettextP.h gettext.h loadinfo.h
--dcgettext.$lo: gettextP.h gettext.h hash-string.h loadinfo.h
-+$(OBJECTS): ../config.h libgnuintl.h
-+bindtextdom.$lo dcgettext.$lo dcigettext.$lo dcngettext.$lo dgettext.$lo dngettext.$lo finddomain.$lo gettext.$lo intl-compat.$lo loadmsgcat.$lo localealias.$lo ngettext.$lo textdomain.$lo: $(srcdir)/gettextP.h $(srcdir)/gmo.h $(srcdir)/loadinfo.h
-+dcigettext.$lo loadmsgcat.$lo: $(srcdir)/hash-string.h
-+explodename.$lo l10nflist.$lo: $(srcdir)/loadinfo.h
-+dcigettext.$lo loadmsgcat.$lo plural.$lo plural-exp.$lo: $(srcdir)/plural-exp.h
-+dcigettext.$lo: $(srcdir)/eval-plural.h
-+localcharset.$lo: $(srcdir)/localcharset.h
-+localealias.$lo localcharset.$lo relocatable.$lo: $(srcdir)/relocatable.h
-+printf.$lo: $(srcdir)/printf-args.h $(srcdir)/printf-args.c $(srcdir)/printf-parse.h $(srcdir)/wprintf-parse.h $(srcdir)/xsize.h $(srcdir)/printf-parse.c $(srcdir)/vasnprintf.h $(srcdir)/vasnwprintf.h $(srcdir)/vasnprintf.c
-
- tags: TAGS
-
- TAGS: $(HEADERS) $(SOURCES)
- here=`pwd`; cd $(srcdir) && etags -o $$here/TAGS $(HEADERS) $(SOURCES)
-
-+ctags: CTAGS
-+
-+CTAGS: $(HEADERS) $(SOURCES)
-+ here=`pwd`; cd $(srcdir) && ctags -o $$here/CTAGS $(HEADERS) $(SOURCES)
-+
- id: ID
-
- ID: $(HEADERS) $(SOURCES)
-@@ -166,12 +444,19 @@
-
-
- mostlyclean:
-- rm -f *.a *.o *.lo core core.*
-+ rm -f *.a *.la *.o *.obj *.lo core core.*
-+ rm -f libgnuintl.h libintl.h charset.alias ref-add.sed ref-del.sed
-+ rm -f -r .libs _libs
-
- clean: mostlyclean
-
- distclean: clean
-- rm -f Makefile ID TAGS po2msg.sed po2tbl.sed libintl.h
-+ rm -f Makefile ID TAGS
-+ if test "$(PACKAGE)" = "gettext-runtime" || test "$(PACKAGE)" = "gettext-tools"; then \
-+ rm -f ChangeLog.inst $(DISTFILES.normal); \
-+ else \
-+ : ; \
-+ fi
-
- maintainer-clean: distclean
- @echo "This command is intended for maintainers to use;"
-@@ -181,33 +466,27 @@
- # GNU gettext needs not contain the file `VERSION' but contains some
- # other files which should not be distributed in other packages.
- distdir = ../$(PACKAGE)-$(VERSION)/$(subdir)
--dist distdir: Makefile $(DISTFILES)
-- if test "$(PACKAGE)" = gettext; then \
-- additional="$(DISTFILES.gettext)"; \
-+dist distdir: Makefile
-+ if test "$(PACKAGE)" = "gettext-tools"; then \
-+ : ; \
- else \
-- additional="$(DISTFILES.normal)"; \
-- fi; \
-- for file in $(DISTFILES.common) $$additional; do \
-- ln $(srcdir)/$$file $(distdir) 2> /dev/null \
-- || cp -p $(srcdir)/$$file $(distdir); \
-- done
--
--dist-libc:
-- tar zcvf intl-glibc.tar.gz $(COMSRCS) $(COMHDRS) libintl.h.glibc
--
--Makefile: Makefile.in ../config.status
-- cd .. \
-- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-+ if test "$(PACKAGE)" = "gettext-runtime"; then \
-+ additional="$(DISTFILES.gettext)"; \
-+ else \
-+ additional="$(DISTFILES.normal)"; \
-+ fi; \
-+ $(MAKE) $(DISTFILES.common) $(DISTFILES.generated) $$additional; \
-+ for file in ChangeLog $(DISTFILES.common) $(DISTFILES.generated) $$additional; do \
-+ if test -f $$file; then dir=.; else dir=$(srcdir); fi; \
-+ cp -p $$dir/$$file $(distdir); \
-+ done; \
-+ fi
-
--# The dependency for intlh.inst is different in gettext and all other
--# packages. Because we cannot you GNU make features we have to solve
--# the problem while rewriting Makefile.in.
--@GT_YES@intlh.inst: intlh.inst.in ../config.status
--@GT_YES@ cd .. \
--@GT_YES@ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= \
--@GT_YES@ $(SHELL) ./config.status
--@GT_NO@.PHONY: intlh.inst
--@GT_NO@intlh.inst:
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+ cd $(top_builddir) && $(SHELL) ./config.status
-+# This would be more efficient, but doesn't work any more with autoconf-2.57,
-+# when AC_CONFIG_FILES([intl/Makefile:somedir/Makefile.in]) is used.
-+# cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
- # Tell versions [3.59,3.63) of GNU make not to export all variables.
- # Otherwise a system limit (for SysV at least) may be exceeded.
---- lrzsz-0.12.20.safe/intl/ngettext.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/ngettext.c 2004-09-12 14:40:34.533721032 -0400
-@@ -0,0 +1,65 @@
-+/* Implementation of ngettext(3) function.
-+ Copyright (C) 1995, 1997, 2000-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifdef HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+#ifdef _LIBC
-+# define __need_NULL
-+# include <stddef.h>
-+#else
-+# include <stdlib.h> /* Just for NULL. */
-+#endif
-+
-+#include "gettextP.h"
-+#ifdef _LIBC
-+# include <libintl.h>
-+#else
-+# include "libgnuintl.h"
-+#endif
-+
-+#include <locale.h>
-+
-+/* @@ end of prolog @@ */
-+
-+/* Names for the libintl functions are a problem. They must not clash
-+ with existing names and they should follow ANSI C. But this source
-+ code is also used in GNU C Library where the names have a __
-+ prefix. So we have to make a difference here. */
-+#ifdef _LIBC
-+# define NGETTEXT __ngettext
-+# define DCNGETTEXT __dcngettext
-+#else
-+# define NGETTEXT libintl_ngettext
-+# define DCNGETTEXT libintl_dcngettext
-+#endif
-+
-+/* Look up MSGID in the current default message catalog for the current
-+ LC_MESSAGES locale. If not found, returns MSGID itself (the default
-+ text). */
-+char *
-+NGETTEXT (const char *msgid1, const char *msgid2, unsigned long int n)
-+{
-+ return DCNGETTEXT (NULL, msgid1, msgid2, n, LC_MESSAGES);
-+}
-+
-+#ifdef _LIBC
-+/* Alias for function name in GNU C Library. */
-+weak_alias (__ngettext, ngettext);
-+#endif
---- lrzsz-0.12.20.safe/intl/os2compat.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/os2compat.c 2004-09-12 14:40:34.539720120 -0400
-@@ -0,0 +1,98 @@
-+/* OS/2 compatibility functions.
-+ Copyright (C) 2001-2002 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#define OS2_AWARE
-+#ifdef HAVE_CONFIG_H
-+#include <config.h>
-+#endif
-+
-+#include <stdlib.h>
-+#include <string.h>
-+#include <sys/param.h>
-+
-+/* A version of getenv() that works from DLLs */
-+extern unsigned long DosScanEnv (const unsigned char *pszName, unsigned char **ppszValue);
-+
-+char *
-+_nl_getenv (const char *name)
-+{
-+ unsigned char *value;
-+ if (DosScanEnv (name, &value))
-+ return NULL;
-+ else
-+ return value;
-+}
-+
-+/* A fixed size buffer. */
-+char libintl_nl_default_dirname[MAXPATHLEN+1];
-+
-+char *_nlos2_libdir = NULL;
-+char *_nlos2_localealiaspath = NULL;
-+char *_nlos2_localedir = NULL;
-+
-+static __attribute__((constructor)) void
-+nlos2_initialize ()
-+{
-+ char *root = getenv ("UNIXROOT");
-+ char *gnulocaledir = getenv ("GNULOCALEDIR");
-+
-+ _nlos2_libdir = gnulocaledir;
-+ if (!_nlos2_libdir)
-+ {
-+ if (root)
-+ {
-+ size_t sl = strlen (root);
-+ _nlos2_libdir = (char *) malloc (sl + strlen (LIBDIR) + 1);
-+ memcpy (_nlos2_libdir, root, sl);
-+ memcpy (_nlos2_libdir + sl, LIBDIR, strlen (LIBDIR) + 1);
-+ }
-+ else
-+ _nlos2_libdir = LIBDIR;
-+ }
-+
-+ _nlos2_localealiaspath = gnulocaledir;
-+ if (!_nlos2_localealiaspath)
-+ {
-+ if (root)
-+ {
-+ size_t sl = strlen (root);
-+ _nlos2_localealiaspath = (char *) malloc (sl + strlen (LOCALE_ALIAS_PATH) + 1);
-+ memcpy (_nlos2_localealiaspath, root, sl);
-+ memcpy (_nlos2_localealiaspath + sl, LOCALE_ALIAS_PATH, strlen (LOCALE_ALIAS_PATH) + 1);
-+ }
-+ else
-+ _nlos2_localealiaspath = LOCALE_ALIAS_PATH;
-+ }
-+
-+ _nlos2_localedir = gnulocaledir;
-+ if (!_nlos2_localedir)
-+ {
-+ if (root)
-+ {
-+ size_t sl = strlen (root);
-+ _nlos2_localedir = (char *) malloc (sl + strlen (LOCALEDIR) + 1);
-+ memcpy (_nlos2_localedir, root, sl);
-+ memcpy (_nlos2_localedir + sl, LOCALEDIR, strlen (LOCALEDIR) + 1);
-+ }
-+ else
-+ _nlos2_localedir = LOCALEDIR;
-+ }
-+
-+ if (strlen (_nlos2_localedir) <= MAXPATHLEN)
-+ strcpy (libintl_nl_default_dirname, _nlos2_localedir);
-+}
---- lrzsz-0.12.20.safe/intl/os2compat.h 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/os2compat.h 2004-09-12 14:40:34.544719360 -0400
-@@ -0,0 +1,46 @@
-+/* OS/2 compatibility defines.
-+ This file is intended to be included from config.h
-+ Copyright (C) 2001-2002 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+/* When included from os2compat.h we need all the original definitions */
-+#ifndef OS2_AWARE
-+
-+#undef LIBDIR
-+#define LIBDIR _nlos2_libdir
-+extern char *_nlos2_libdir;
-+
-+#undef LOCALEDIR
-+#define LOCALEDIR _nlos2_localedir
-+extern char *_nlos2_localedir;
-+
-+#undef LOCALE_ALIAS_PATH
-+#define LOCALE_ALIAS_PATH _nlos2_localealiaspath
-+extern char *_nlos2_localealiaspath;
-+
-+#endif
-+
-+#undef HAVE_STRCASECMP
-+#define HAVE_STRCASECMP 1
-+#define strcasecmp stricmp
-+#define strncasecmp strnicmp
-+
-+/* We have our own getenv() which works even if library is compiled as DLL */
-+#define getenv _nl_getenv
-+
-+/* Older versions of gettext used -1 as the value of LC_MESSAGES */
-+#define LC_MESSAGES_COMPAT (-1)
---- lrzsz-0.12.20.safe/intl/osdep.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/osdep.c 2004-09-12 14:40:34.550718448 -0400
-@@ -0,0 +1,24 @@
-+/* OS dependent parts of libintl.
-+ Copyright (C) 2001-2002 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#if defined __EMX__
-+# include "os2compat.c"
-+#else
-+/* Avoid AIX compiler warning. */
-+typedef int dummy;
-+#endif
---- lrzsz-0.12.20.safe/intl/plural.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/plural.c 2004-09-12 14:40:36.571411256 -0400
-@@ -0,0 +1,1490 @@
-+/* A Bison parser, made from plural.y
-+ by GNU bison 1.35. */
-+
-+#define YYBISON 1 /* Identify Bison output. */
-+
-+#define yyparse __gettextparse
-+#define yylex __gettextlex
-+#define yyerror __gettexterror
-+#define yylval __gettextlval
-+#define yychar __gettextchar
-+#define yydebug __gettextdebug
-+#define yynerrs __gettextnerrs
-+# define EQUOP2 257
-+# define CMPOP2 258
-+# define ADDOP2 259
-+# define MULOP2 260
-+# define NUMBER 261
-+
-+#line 1 "plural.y"
-+
-+/* Expression parsing for plural form selection.
-+ Copyright (C) 2000-2001, 2003 Free Software Foundation, Inc.
-+ Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+/* The bison generated parser uses alloca. AIX 3 forces us to put this
-+ declaration at the beginning of the file. The declaration in bison's
-+ skeleton file comes too late. This must come before <config.h>
-+ because <config.h> may include arbitrary system headers. */
-+#if defined _AIX && !defined __GNUC__
-+ #pragma alloca
-+#endif
-+
-+#ifdef HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+#include <stddef.h>
-+#include <stdlib.h>
-+#include "plural-exp.h"
-+
-+/* The main function generated by the parser is called __gettextparse,
-+ but we want it to be called PLURAL_PARSE. */
-+#ifndef _LIBC
-+# define __gettextparse PLURAL_PARSE
-+#endif
-+
-+#define YYLEX_PARAM &((struct parse_args *) arg)->cp
-+#define YYPARSE_PARAM arg
-+
-+#line 49 "plural.y"
-+#ifndef YYSTYPE
-+typedef union {
-+ unsigned long int num;
-+ enum operator op;
-+ struct expression *exp;
-+} yystype;
-+# define YYSTYPE yystype
-+# define YYSTYPE_IS_TRIVIAL 1
-+#endif
-+#line 55 "plural.y"
-+
-+/* Prototypes for local functions. */
-+static int yylex (YYSTYPE *lval, const char **pexp);
-+static void yyerror (const char *str);
-+
-+/* Allocation of expressions. */
-+
-+static struct expression *
-+new_exp (int nargs, enum operator op, struct expression * const *args)
-+{
-+ int i;
-+ struct expression *newp;
-+
-+ /* If any of the argument could not be malloc'ed, just return NULL. */
-+ for (i = nargs - 1; i >= 0; i--)
-+ if (args[i] == NULL)
-+ goto fail;
-+
-+ /* Allocate a new expression. */
-+ newp = (struct expression *) malloc (sizeof (*newp));
-+ if (newp != NULL)
-+ {
-+ newp->nargs = nargs;
-+ newp->operation = op;
-+ for (i = nargs - 1; i >= 0; i--)
-+ newp->val.args[i] = args[i];
-+ return newp;
-+ }
-+
-+ fail:
-+ for (i = nargs - 1; i >= 0; i--)
-+ FREE_EXPRESSION (args[i]);
-+
-+ return NULL;
-+}
-+
-+static inline struct expression *
-+new_exp_0 (enum operator op)
-+{
-+ return new_exp (0, op, NULL);
-+}
-+
-+static inline struct expression *
-+new_exp_1 (enum operator op, struct expression *right)
-+{
-+ struct expression *args[1];
-+
-+ args[0] = right;
-+ return new_exp (1, op, args);
-+}
-+
-+static struct expression *
-+new_exp_2 (enum operator op, struct expression *left, struct expression *right)
-+{
-+ struct expression *args[2];
-+
-+ args[0] = left;
-+ args[1] = right;
-+ return new_exp (2, op, args);
-+}
-+
-+static inline struct expression *
-+new_exp_3 (enum operator op, struct expression *bexp,
-+ struct expression *tbranch, struct expression *fbranch)
-+{
-+ struct expression *args[3];
-+
-+ args[0] = bexp;
-+ args[1] = tbranch;
-+ args[2] = fbranch;
-+ return new_exp (3, op, args);
-+}
-+
-+#ifndef YYDEBUG
-+# define YYDEBUG 0
-+#endif
-+
-+
-+
-+#define YYFINAL 27
-+#define YYFLAG -32768
-+#define YYNTBASE 16
-+
-+/* YYTRANSLATE(YYLEX) -- Bison token number corresponding to YYLEX. */
-+#define YYTRANSLATE(x) ((unsigned)(x) <= 261 ? yytranslate[x] : 18)
-+
-+/* YYTRANSLATE[YYLEX] -- Bison token number corresponding to YYLEX. */
-+static const char yytranslate[] =
-+{
-+ 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 10, 2, 2, 2, 2, 5, 2,
-+ 14, 15, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 12, 2,
-+ 2, 2, 2, 3, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 13, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 4, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 1, 6, 7, 8,
-+ 9, 11
-+};
-+
-+#if YYDEBUG
-+static const short yyprhs[] =
-+{
-+ 0, 0, 2, 8, 12, 16, 20, 24, 28, 32,
-+ 35, 37, 39
-+};
-+static const short yyrhs[] =
-+{
-+ 17, 0, 17, 3, 17, 12, 17, 0, 17, 4,
-+ 17, 0, 17, 5, 17, 0, 17, 6, 17, 0,
-+ 17, 7, 17, 0, 17, 8, 17, 0, 17, 9,
-+ 17, 0, 10, 17, 0, 13, 0, 11, 0, 14,
-+ 17, 15, 0
-+};
-+
-+#endif
-+
-+#if YYDEBUG
-+/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
-+static const short yyrline[] =
-+{
-+ 0, 150, 158, 162, 166, 170, 174, 178, 182, 186,
-+ 190, 194, 199
-+};
-+#endif
-+
-+
-+#if (YYDEBUG) || defined YYERROR_VERBOSE
-+
-+/* YYTNAME[TOKEN_NUM] -- String name of the token TOKEN_NUM. */
-+static const char *const yytname[] =
-+{
-+ "$", "error", "$undefined.", "'?'", "'|'", "'&'", "EQUOP2", "CMPOP2",
-+ "ADDOP2", "MULOP2", "'!'", "NUMBER", "':'", "'n'", "'('", "')'",
-+ "start", "exp", 0
-+};
-+#endif
-+
-+/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
-+static const short yyr1[] =
-+{
-+ 0, 16, 17, 17, 17, 17, 17, 17, 17, 17,
-+ 17, 17, 17
-+};
-+
-+/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
-+static const short yyr2[] =
-+{
-+ 0, 1, 5, 3, 3, 3, 3, 3, 3, 2,
-+ 1, 1, 3
-+};
-+
-+/* YYDEFACT[S] -- default rule to reduce with in state S when YYTABLE
-+ doesn't specify something else to do. Zero means the default is an
-+ error. */
-+static const short yydefact[] =
-+{
-+ 0, 0, 11, 10, 0, 1, 9, 0, 0, 0,
-+ 0, 0, 0, 0, 0, 12, 0, 3, 4, 5,
-+ 6, 7, 8, 0, 2, 0, 0, 0
-+};
-+
-+static const short yydefgoto[] =
-+{
-+ 25, 5
-+};
-+
-+static const short yypact[] =
-+{
-+ -9, -9,-32768,-32768, -9, 34,-32768, 11, -9, -9,
-+ -9, -9, -9, -9, -9,-32768, 24, 39, 43, 16,
-+ 26, -3,-32768, -9, 34, 21, 53,-32768
-+};
-+
-+static const short yypgoto[] =
-+{
-+ -32768, -1
-+};
-+
-+
-+#define YYLAST 53
-+
-+
-+static const short yytable[] =
-+{
-+ 6, 1, 2, 7, 3, 4, 14, 16, 17, 18,
-+ 19, 20, 21, 22, 8, 9, 10, 11, 12, 13,
-+ 14, 26, 24, 12, 13, 14, 15, 8, 9, 10,
-+ 11, 12, 13, 14, 13, 14, 23, 8, 9, 10,
-+ 11, 12, 13, 14, 10, 11, 12, 13, 14, 11,
-+ 12, 13, 14, 27
-+};
-+
-+static const short yycheck[] =
-+{
-+ 1, 10, 11, 4, 13, 14, 9, 8, 9, 10,
-+ 11, 12, 13, 14, 3, 4, 5, 6, 7, 8,
-+ 9, 0, 23, 7, 8, 9, 15, 3, 4, 5,
-+ 6, 7, 8, 9, 8, 9, 12, 3, 4, 5,
-+ 6, 7, 8, 9, 5, 6, 7, 8, 9, 6,
-+ 7, 8, 9, 0
-+};
-+#define YYPURE 1
-+
-+/* -*-C-*- Note some compilers choke on comments on `#line' lines. */
-+#line 3 "/usr/local/share/bison/bison.simple"
-+
-+/* Skeleton output parser for bison,
-+
-+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002 Free Software
-+ Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330,
-+ Boston, MA 02111-1307, USA. */
-+
-+/* As a special exception, when this file is copied by Bison into a
-+ Bison output file, you may use that output file without restriction.
-+ This special exception was added by the Free Software Foundation
-+ in version 1.24 of Bison. */
-+
-+/* This is the parser code that is written into each bison parser when
-+ the %semantic_parser declaration is not specified in the grammar.
-+ It was written by Richard Stallman by simplifying the hairy parser
-+ used when %semantic_parser is specified. */
-+
-+/* All symbols defined below should begin with yy or YY, to avoid
-+ infringing on user name space. This should be done even for local
-+ variables, as they might otherwise be expanded by user macros.
-+ There are some unavoidable exceptions within include files to
-+ define necessary library symbols; they are noted "INFRINGES ON
-+ USER NAME SPACE" below. */
-+
-+#if ! defined (yyoverflow) || defined (YYERROR_VERBOSE)
-+
-+/* The parser invokes alloca or malloc; define the necessary symbols. */
-+
-+# if YYSTACK_USE_ALLOCA
-+# define YYSTACK_ALLOC alloca
-+# else
-+# ifndef YYSTACK_USE_ALLOCA
-+# if defined (alloca) || defined (_ALLOCA_H)
-+# define YYSTACK_ALLOC alloca
-+# else
-+# ifdef __GNUC__
-+# define YYSTACK_ALLOC __builtin_alloca
-+# endif
-+# endif
-+# endif
-+# endif
-+
-+# ifdef YYSTACK_ALLOC
-+ /* Pacify GCC's `empty if-body' warning. */
-+# define YYSTACK_FREE(Ptr) do { /* empty */; } while (0)
-+# else
-+# if defined (__STDC__) || defined (__cplusplus)
-+# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-+# define YYSIZE_T size_t
-+# endif
-+# define YYSTACK_ALLOC malloc
-+# define YYSTACK_FREE free
-+# endif
-+#endif /* ! defined (yyoverflow) || defined (YYERROR_VERBOSE) */
-+
-+
-+#if (! defined (yyoverflow) \
-+ && (! defined (__cplusplus) \
-+ || (YYLTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
-+
-+/* A type that is properly aligned for any stack member. */
-+union yyalloc
-+{
-+ short yyss;
-+ YYSTYPE yyvs;
-+# if YYLSP_NEEDED
-+ YYLTYPE yyls;
-+# endif
-+};
-+
-+/* The size of the maximum gap between one aligned stack and the next. */
-+# define YYSTACK_GAP_MAX (sizeof (union yyalloc) - 1)
-+
-+/* The size of an array large to enough to hold all stacks, each with
-+ N elements. */
-+# if YYLSP_NEEDED
-+# define YYSTACK_BYTES(N) \
-+ ((N) * (sizeof (short) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \
-+ + 2 * YYSTACK_GAP_MAX)
-+# else
-+# define YYSTACK_BYTES(N) \
-+ ((N) * (sizeof (short) + sizeof (YYSTYPE)) \
-+ + YYSTACK_GAP_MAX)
-+# endif
-+
-+/* Copy COUNT objects from FROM to TO. The source and destination do
-+ not overlap. */
-+# ifndef YYCOPY
-+# if 1 < __GNUC__
-+# define YYCOPY(To, From, Count) \
-+ __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
-+# else
-+# define YYCOPY(To, From, Count) \
-+ do \
-+ { \
-+ register YYSIZE_T yyi; \
-+ for (yyi = 0; yyi < (Count); yyi++) \
-+ (To)[yyi] = (From)[yyi]; \
-+ } \
-+ while (0)
-+# endif
-+# endif
-+
-+/* Relocate STACK from its old location to the new one. The
-+ local variables YYSIZE and YYSTACKSIZE give the old and new number of
-+ elements in the stack, and YYPTR gives the new location of the
-+ stack. Advance YYPTR to a properly aligned location for the next
-+ stack. */
-+# define YYSTACK_RELOCATE(Stack) \
-+ do \
-+ { \
-+ YYSIZE_T yynewbytes; \
-+ YYCOPY (&yyptr->Stack, Stack, yysize); \
-+ Stack = &yyptr->Stack; \
-+ yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAX; \
-+ yyptr += yynewbytes / sizeof (*yyptr); \
-+ } \
-+ while (0)
-+
-+#endif
-+
-+
-+#if ! defined (YYSIZE_T) && defined (__SIZE_TYPE__)
-+# define YYSIZE_T __SIZE_TYPE__
-+#endif
-+#if ! defined (YYSIZE_T) && defined (size_t)
-+# define YYSIZE_T size_t
-+#endif
-+#if ! defined (YYSIZE_T)
-+# if defined (__STDC__) || defined (__cplusplus)
-+# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
-+# define YYSIZE_T size_t
-+# endif
-+#endif
-+#if ! defined (YYSIZE_T)
-+# define YYSIZE_T unsigned int
-+#endif
-+
-+#define yyerrok (yyerrstatus = 0)
-+#define yyclearin (yychar = YYEMPTY)
-+#define YYEMPTY -2
-+#define YYEOF 0
-+#define YYACCEPT goto yyacceptlab
-+#define YYABORT goto yyabortlab
-+#define YYERROR goto yyerrlab1
-+/* Like YYERROR except do call yyerror. This remains here temporarily
-+ to ease the transition to the new meaning of YYERROR, for GCC.
-+ Once GCC version 2 has supplanted version 1, this can go. */
-+#define YYFAIL goto yyerrlab
-+#define YYRECOVERING() (!!yyerrstatus)
-+#define YYBACKUP(Token, Value) \
-+do \
-+ if (yychar == YYEMPTY && yylen == 1) \
-+ { \
-+ yychar = (Token); \
-+ yylval = (Value); \
-+ yychar1 = YYTRANSLATE (yychar); \
-+ YYPOPSTACK; \
-+ goto yybackup; \
-+ } \
-+ else \
-+ { \
-+ yyerror ("syntax error: cannot back up"); \
-+ YYERROR; \
-+ } \
-+while (0)
-+
-+#define YYTERROR 1
-+#define YYERRCODE 256
-+
-+
-+/* YYLLOC_DEFAULT -- Compute the default location (before the actions
-+ are run).
-+
-+ When YYLLOC_DEFAULT is run, CURRENT is set the location of the
-+ first token. By default, to implement support for ranges, extend
-+ its range to the last symbol. */
-+
-+#ifndef YYLLOC_DEFAULT
-+# define YYLLOC_DEFAULT(Current, Rhs, N) \
-+ Current.last_line = Rhs[N].last_line; \
-+ Current.last_column = Rhs[N].last_column;
-+#endif
-+
-+
-+/* YYLEX -- calling `yylex' with the right arguments. */
-+
-+#if YYPURE
-+# if YYLSP_NEEDED
-+# ifdef YYLEX_PARAM
-+# define YYLEX yylex (&yylval, &yylloc, YYLEX_PARAM)
-+# else
-+# define YYLEX yylex (&yylval, &yylloc)
-+# endif
-+# else /* !YYLSP_NEEDED */
-+# ifdef YYLEX_PARAM
-+# define YYLEX yylex (&yylval, YYLEX_PARAM)
-+# else
-+# define YYLEX yylex (&yylval)
-+# endif
-+# endif /* !YYLSP_NEEDED */
-+#else /* !YYPURE */
-+# define YYLEX yylex ()
-+#endif /* !YYPURE */
-+
-+
-+/* Enable debugging if requested. */
-+#if YYDEBUG
-+
-+# ifndef YYFPRINTF
-+# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
-+# define YYFPRINTF fprintf
-+# endif
-+
-+# define YYDPRINTF(Args) \
-+do { \
-+ if (yydebug) \
-+ YYFPRINTF Args; \
-+} while (0)
-+/* Nonzero means print parse trace. It is left uninitialized so that
-+ multiple parsers can coexist. */
-+int yydebug;
-+#else /* !YYDEBUG */
-+# define YYDPRINTF(Args)
-+#endif /* !YYDEBUG */
-+
-+/* YYINITDEPTH -- initial size of the parser's stacks. */
-+#ifndef YYINITDEPTH
-+# define YYINITDEPTH 200
-+#endif
-+
-+/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
-+ if the built-in stack extension method is used).
-+
-+ Do not make this value too large; the results are undefined if
-+ SIZE_MAX < YYSTACK_BYTES (YYMAXDEPTH)
-+ evaluated with infinite-precision integer arithmetic. */
-+
-+#if YYMAXDEPTH == 0
-+# undef YYMAXDEPTH
-+#endif
-+
-+#ifndef YYMAXDEPTH
-+# define YYMAXDEPTH 10000
-+#endif
-+\f
-+#ifdef YYERROR_VERBOSE
-+
-+# ifndef yystrlen
-+# if defined (__GLIBC__) && defined (_STRING_H)
-+# define yystrlen strlen
-+# else
-+/* Return the length of YYSTR. */
-+static YYSIZE_T
-+# if defined (__STDC__) || defined (__cplusplus)
-+yystrlen (const char *yystr)
-+# else
-+yystrlen (yystr)
-+ const char *yystr;
-+# endif
-+{
-+ register const char *yys = yystr;
-+
-+ while (*yys++ != '\0')
-+ continue;
-+
-+ return yys - yystr - 1;
-+}
-+# endif
-+# endif
-+
-+# ifndef yystpcpy
-+# if defined (__GLIBC__) && defined (_STRING_H) && defined (_GNU_SOURCE)
-+# define yystpcpy stpcpy
-+# else
-+/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
-+ YYDEST. */
-+static char *
-+# if defined (__STDC__) || defined (__cplusplus)
-+yystpcpy (char *yydest, const char *yysrc)
-+# else
-+yystpcpy (yydest, yysrc)
-+ char *yydest;
-+ const char *yysrc;
-+# endif
-+{
-+ register char *yyd = yydest;
-+ register const char *yys = yysrc;
-+
-+ while ((*yyd++ = *yys++) != '\0')
-+ continue;
-+
-+ return yyd - 1;
-+}
-+# endif
-+# endif
-+#endif
-+\f
-+#line 315 "/usr/local/share/bison/bison.simple"
-+
-+
-+/* The user can define YYPARSE_PARAM as the name of an argument to be passed
-+ into yyparse. The argument should have type void *.
-+ It should actually point to an object.
-+ Grammar actions can access the variable by casting it
-+ to the proper pointer type. */
-+
-+#ifdef YYPARSE_PARAM
-+# if defined (__STDC__) || defined (__cplusplus)
-+# define YYPARSE_PARAM_ARG void *YYPARSE_PARAM
-+# define YYPARSE_PARAM_DECL
-+# else
-+# define YYPARSE_PARAM_ARG YYPARSE_PARAM
-+# define YYPARSE_PARAM_DECL void *YYPARSE_PARAM;
-+# endif
-+#else /* !YYPARSE_PARAM */
-+# define YYPARSE_PARAM_ARG
-+# define YYPARSE_PARAM_DECL
-+#endif /* !YYPARSE_PARAM */
-+
-+/* Prevent warning if -Wstrict-prototypes. */
-+#ifdef __GNUC__
-+# ifdef YYPARSE_PARAM
-+int yyparse (void *);
-+# else
-+int yyparse (void);
-+# endif
-+#endif
-+
-+/* YY_DECL_VARIABLES -- depending whether we use a pure parser,
-+ variables are global, or local to YYPARSE. */
-+
-+#define YY_DECL_NON_LSP_VARIABLES \
-+/* The lookahead symbol. */ \
-+int yychar; \
-+ \
-+/* The semantic value of the lookahead symbol. */ \
-+YYSTYPE yylval; \
-+ \
-+/* Number of parse errors so far. */ \
-+int yynerrs;
-+
-+#if YYLSP_NEEDED
-+# define YY_DECL_VARIABLES \
-+YY_DECL_NON_LSP_VARIABLES \
-+ \
-+/* Location data for the lookahead symbol. */ \
-+YYLTYPE yylloc;
-+#else
-+# define YY_DECL_VARIABLES \
-+YY_DECL_NON_LSP_VARIABLES
-+#endif
-+
-+
-+/* If nonreentrant, generate the variables here. */
-+
-+#if !YYPURE
-+YY_DECL_VARIABLES
-+#endif /* !YYPURE */
-+
-+int
-+yyparse (YYPARSE_PARAM_ARG)
-+ YYPARSE_PARAM_DECL
-+{
-+ /* If reentrant, generate the variables here. */
-+#if YYPURE
-+ YY_DECL_VARIABLES
-+#endif /* !YYPURE */
-+
-+ register int yystate;
-+ register int yyn;
-+ int yyresult;
-+ /* Number of tokens to shift before error messages enabled. */
-+ int yyerrstatus;
-+ /* Lookahead token as an internal (translated) token number. */
-+ int yychar1 = 0;
-+
-+ /* Three stacks and their tools:
-+ `yyss': related to states,
-+ `yyvs': related to semantic values,
-+ `yyls': related to locations.
-+
-+ Refer to the stacks thru separate pointers, to allow yyoverflow
-+ to reallocate them elsewhere. */
-+
-+ /* The state stack. */
-+ short yyssa[YYINITDEPTH];
-+ short *yyss = yyssa;
-+ register short *yyssp;
-+
-+ /* The semantic value stack. */
-+ YYSTYPE yyvsa[YYINITDEPTH];
-+ YYSTYPE *yyvs = yyvsa;
-+ register YYSTYPE *yyvsp;
-+
-+#if YYLSP_NEEDED
-+ /* The location stack. */
-+ YYLTYPE yylsa[YYINITDEPTH];
-+ YYLTYPE *yyls = yylsa;
-+ YYLTYPE *yylsp;
-+#endif
-+
-+#if YYLSP_NEEDED
-+# define YYPOPSTACK (yyvsp--, yyssp--, yylsp--)
-+#else
-+# define YYPOPSTACK (yyvsp--, yyssp--)
-+#endif
-+
-+ YYSIZE_T yystacksize = YYINITDEPTH;
-+
-+
-+ /* The variables used to return semantic value and location from the
-+ action routines. */
-+ YYSTYPE yyval;
-+#if YYLSP_NEEDED
-+ YYLTYPE yyloc;
-+#endif
-+
-+ /* When reducing, the number of symbols on the RHS of the reduced
-+ rule. */
-+ int yylen;
-+
-+ YYDPRINTF ((stderr, "Starting parse\n"));
-+
-+ yystate = 0;
-+ yyerrstatus = 0;
-+ yynerrs = 0;
-+ yychar = YYEMPTY; /* Cause a token to be read. */
-+
-+ /* Initialize stack pointers.
-+ Waste one element of value and location stack
-+ so that they stay on the same level as the state stack.
-+ The wasted elements are never initialized. */
-+
-+ yyssp = yyss;
-+ yyvsp = yyvs;
-+#if YYLSP_NEEDED
-+ yylsp = yyls;
-+#endif
-+ goto yysetstate;
-+
-+/*------------------------------------------------------------.
-+| yynewstate -- Push a new state, which is found in yystate. |
-+`------------------------------------------------------------*/
-+ yynewstate:
-+ /* In all cases, when you get here, the value and location stacks
-+ have just been pushed. so pushing a state here evens the stacks.
-+ */
-+ yyssp++;
-+
-+ yysetstate:
-+ *yyssp = yystate;
-+
-+ if (yyssp >= yyss + yystacksize - 1)
-+ {
-+ /* Get the current used size of the three stacks, in elements. */
-+ YYSIZE_T yysize = yyssp - yyss + 1;
-+
-+#ifdef yyoverflow
-+ {
-+ /* Give user a chance to reallocate the stack. Use copies of
-+ these so that the &'s don't force the real ones into
-+ memory. */
-+ YYSTYPE *yyvs1 = yyvs;
-+ short *yyss1 = yyss;
-+
-+ /* Each stack pointer address is followed by the size of the
-+ data in use in that stack, in bytes. */
-+# if YYLSP_NEEDED
-+ YYLTYPE *yyls1 = yyls;
-+ /* This used to be a conditional around just the two extra args,
-+ but that might be undefined if yyoverflow is a macro. */
-+ yyoverflow ("parser stack overflow",
-+ &yyss1, yysize * sizeof (*yyssp),
-+ &yyvs1, yysize * sizeof (*yyvsp),
-+ &yyls1, yysize * sizeof (*yylsp),
-+ &yystacksize);
-+ yyls = yyls1;
-+# else
-+ yyoverflow ("parser stack overflow",
-+ &yyss1, yysize * sizeof (*yyssp),
-+ &yyvs1, yysize * sizeof (*yyvsp),
-+ &yystacksize);
-+# endif
-+ yyss = yyss1;
-+ yyvs = yyvs1;
-+ }
-+#else /* no yyoverflow */
-+# ifndef YYSTACK_RELOCATE
-+ goto yyoverflowlab;
-+# else
-+ /* Extend the stack our own way. */
-+ if (yystacksize >= YYMAXDEPTH)
-+ goto yyoverflowlab;
-+ yystacksize *= 2;
-+ if (yystacksize > YYMAXDEPTH)
-+ yystacksize = YYMAXDEPTH;
-+
-+ {
-+ short *yyss1 = yyss;
-+ union yyalloc *yyptr =
-+ (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
-+ if (! yyptr)
-+ goto yyoverflowlab;
-+ YYSTACK_RELOCATE (yyss);
-+ YYSTACK_RELOCATE (yyvs);
-+# if YYLSP_NEEDED
-+ YYSTACK_RELOCATE (yyls);
-+# endif
-+# undef YYSTACK_RELOCATE
-+ if (yyss1 != yyssa)
-+ YYSTACK_FREE (yyss1);
-+ }
-+# endif
-+#endif /* no yyoverflow */
-+
-+ yyssp = yyss + yysize - 1;
-+ yyvsp = yyvs + yysize - 1;
-+#if YYLSP_NEEDED
-+ yylsp = yyls + yysize - 1;
-+#endif
-+
-+ YYDPRINTF ((stderr, "Stack size increased to %lu\n",
-+ (unsigned long int) yystacksize));
-+
-+ if (yyssp >= yyss + yystacksize - 1)
-+ YYABORT;
-+ }
-+
-+ YYDPRINTF ((stderr, "Entering state %d\n", yystate));
-+
-+ goto yybackup;
-+
-+
-+/*-----------.
-+| yybackup. |
-+`-----------*/
-+yybackup:
-+
-+/* Do appropriate processing given the current state. */
-+/* Read a lookahead token if we need one and don't already have one. */
-+/* yyresume: */
-+
-+ /* First try to decide what to do without reference to lookahead token. */
-+
-+ yyn = yypact[yystate];
-+ if (yyn == YYFLAG)
-+ goto yydefault;
-+
-+ /* Not known => get a lookahead token if don't already have one. */
-+
-+ /* yychar is either YYEMPTY or YYEOF
-+ or a valid token in external form. */
-+
-+ if (yychar == YYEMPTY)
-+ {
-+ YYDPRINTF ((stderr, "Reading a token: "));
-+ yychar = YYLEX;
-+ }
-+
-+ /* Convert token to internal form (in yychar1) for indexing tables with */
-+
-+ if (yychar <= 0) /* This means end of input. */
-+ {
-+ yychar1 = 0;
-+ yychar = YYEOF; /* Don't call YYLEX any more */
-+
-+ YYDPRINTF ((stderr, "Now at end of input.\n"));
-+ }
-+ else
-+ {
-+ yychar1 = YYTRANSLATE (yychar);
-+
-+#if YYDEBUG
-+ /* We have to keep this `#if YYDEBUG', since we use variables
-+ which are defined only if `YYDEBUG' is set. */
-+ if (yydebug)
-+ {
-+ YYFPRINTF (stderr, "Next token is %d (%s",
-+ yychar, yytname[yychar1]);
-+ /* Give the individual parser a way to print the precise
-+ meaning of a token, for further debugging info. */
-+# ifdef YYPRINT
-+ YYPRINT (stderr, yychar, yylval);
-+# endif
-+ YYFPRINTF (stderr, ")\n");
-+ }
-+#endif
-+ }
-+
-+ yyn += yychar1;
-+ if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != yychar1)
-+ goto yydefault;
-+
-+ yyn = yytable[yyn];
-+
-+ /* yyn is what to do for this token type in this state.
-+ Negative => reduce, -yyn is rule number.
-+ Positive => shift, yyn is new state.
-+ New state is final state => don't bother to shift,
-+ just return success.
-+ 0, or most negative number => error. */
-+
-+ if (yyn < 0)
-+ {
-+ if (yyn == YYFLAG)
-+ goto yyerrlab;
-+ yyn = -yyn;
-+ goto yyreduce;
-+ }
-+ else if (yyn == 0)
-+ goto yyerrlab;
-+
-+ if (yyn == YYFINAL)
-+ YYACCEPT;
-+
-+ /* Shift the lookahead token. */
-+ YYDPRINTF ((stderr, "Shifting token %d (%s), ",
-+ yychar, yytname[yychar1]));
-+
-+ /* Discard the token being shifted unless it is eof. */
-+ if (yychar != YYEOF)
-+ yychar = YYEMPTY;
-+
-+ *++yyvsp = yylval;
-+#if YYLSP_NEEDED
-+ *++yylsp = yylloc;
-+#endif
-+
-+ /* Count tokens shifted since error; after three, turn off error
-+ status. */
-+ if (yyerrstatus)
-+ yyerrstatus--;
-+
-+ yystate = yyn;
-+ goto yynewstate;
-+
-+
-+/*-----------------------------------------------------------.
-+| yydefault -- do the default action for the current state. |
-+`-----------------------------------------------------------*/
-+yydefault:
-+ yyn = yydefact[yystate];
-+ if (yyn == 0)
-+ goto yyerrlab;
-+ goto yyreduce;
-+
-+
-+/*-----------------------------.
-+| yyreduce -- Do a reduction. |
-+`-----------------------------*/
-+yyreduce:
-+ /* yyn is the number of a rule to reduce with. */
-+ yylen = yyr2[yyn];
-+
-+ /* If YYLEN is nonzero, implement the default value of the action:
-+ `$$ = $1'.
-+
-+ Otherwise, the following line sets YYVAL to the semantic value of
-+ the lookahead token. This behavior is undocumented and Bison
-+ users should not rely upon it. Assigning to YYVAL
-+ unconditionally makes the parser a bit smaller, and it avoids a
-+ GCC warning that YYVAL may be used uninitialized. */
-+ yyval = yyvsp[1-yylen];
-+
-+#if YYLSP_NEEDED
-+ /* Similarly for the default location. Let the user run additional
-+ commands if for instance locations are ranges. */
-+ yyloc = yylsp[1-yylen];
-+ YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen);
-+#endif
-+
-+#if YYDEBUG
-+ /* We have to keep this `#if YYDEBUG', since we use variables which
-+ are defined only if `YYDEBUG' is set. */
-+ if (yydebug)
-+ {
-+ int yyi;
-+
-+ YYFPRINTF (stderr, "Reducing via rule %d (line %d), ",
-+ yyn, yyrline[yyn]);
-+
-+ /* Print the symbols being reduced, and their result. */
-+ for (yyi = yyprhs[yyn]; yyrhs[yyi] > 0; yyi++)
-+ YYFPRINTF (stderr, "%s ", yytname[yyrhs[yyi]]);
-+ YYFPRINTF (stderr, " -> %s\n", yytname[yyr1[yyn]]);
-+ }
-+#endif
-+
-+ switch (yyn) {
-+
-+case 1:
-+#line 151 "plural.y"
-+{
-+ if (yyvsp[0].exp == NULL)
-+ YYABORT;
-+ ((struct parse_args *) arg)->res = yyvsp[0].exp;
-+ }
-+ break;
-+case 2:
-+#line 159 "plural.y"
-+{
-+ yyval.exp = new_exp_3 (qmop, yyvsp[-4].exp, yyvsp[-2].exp, yyvsp[0].exp);
-+ }
-+ break;
-+case 3:
-+#line 163 "plural.y"
-+{
-+ yyval.exp = new_exp_2 (lor, yyvsp[-2].exp, yyvsp[0].exp);
-+ }
-+ break;
-+case 4:
-+#line 167 "plural.y"
-+{
-+ yyval.exp = new_exp_2 (land, yyvsp[-2].exp, yyvsp[0].exp);
-+ }
-+ break;
-+case 5:
-+#line 171 "plural.y"
-+{
-+ yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
-+ }
-+ break;
-+case 6:
-+#line 175 "plural.y"
-+{
-+ yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
-+ }
-+ break;
-+case 7:
-+#line 179 "plural.y"
-+{
-+ yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
-+ }
-+ break;
-+case 8:
-+#line 183 "plural.y"
-+{
-+ yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
-+ }
-+ break;
-+case 9:
-+#line 187 "plural.y"
-+{
-+ yyval.exp = new_exp_1 (lnot, yyvsp[0].exp);
-+ }
-+ break;
-+case 10:
-+#line 191 "plural.y"
-+{
-+ yyval.exp = new_exp_0 (var);
-+ }
-+ break;
-+case 11:
-+#line 195 "plural.y"
-+{
-+ if ((yyval.exp = new_exp_0 (num)) != NULL)
-+ yyval.exp->val.num = yyvsp[0].num;
-+ }
-+ break;
-+case 12:
-+#line 200 "plural.y"
-+{
-+ yyval.exp = yyvsp[-1].exp;
-+ }
-+ break;
-+}
-+
-+#line 705 "/usr/local/share/bison/bison.simple"
-+
-+\f
-+ yyvsp -= yylen;
-+ yyssp -= yylen;
-+#if YYLSP_NEEDED
-+ yylsp -= yylen;
-+#endif
-+
-+#if YYDEBUG
-+ if (yydebug)
-+ {
-+ short *yyssp1 = yyss - 1;
-+ YYFPRINTF (stderr, "state stack now");
-+ while (yyssp1 != yyssp)
-+ YYFPRINTF (stderr, " %d", *++yyssp1);
-+ YYFPRINTF (stderr, "\n");
-+ }
-+#endif
-+
-+ *++yyvsp = yyval;
-+#if YYLSP_NEEDED
-+ *++yylsp = yyloc;
-+#endif
-+
-+ /* Now `shift' the result of the reduction. Determine what state
-+ that goes to, based on the state we popped back to and the rule
-+ number reduced by. */
-+
-+ yyn = yyr1[yyn];
-+
-+ yystate = yypgoto[yyn - YYNTBASE] + *yyssp;
-+ if (yystate >= 0 && yystate <= YYLAST && yycheck[yystate] == *yyssp)
-+ yystate = yytable[yystate];
-+ else
-+ yystate = yydefgoto[yyn - YYNTBASE];
-+
-+ goto yynewstate;
-+
-+
-+/*------------------------------------.
-+| yyerrlab -- here on detecting error |
-+`------------------------------------*/
-+yyerrlab:
-+ /* If not already recovering from an error, report this error. */
-+ if (!yyerrstatus)
-+ {
-+ ++yynerrs;
-+
-+#ifdef YYERROR_VERBOSE
-+ yyn = yypact[yystate];
-+
-+ if (yyn > YYFLAG && yyn < YYLAST)
-+ {
-+ YYSIZE_T yysize = 0;
-+ char *yymsg;
-+ int yyx, yycount;
-+
-+ yycount = 0;
-+ /* Start YYX at -YYN if negative to avoid negative indexes in
-+ YYCHECK. */
-+ for (yyx = yyn < 0 ? -yyn : 0;
-+ yyx < (int) (sizeof (yytname) / sizeof (char *)); yyx++)
-+ if (yycheck[yyx + yyn] == yyx)
-+ yysize += yystrlen (yytname[yyx]) + 15, yycount++;
-+ yysize += yystrlen ("parse error, unexpected ") + 1;
-+ yysize += yystrlen (yytname[YYTRANSLATE (yychar)]);
-+ yymsg = (char *) YYSTACK_ALLOC (yysize);
-+ if (yymsg != 0)
-+ {
-+ char *yyp = yystpcpy (yymsg, "parse error, unexpected ");
-+ yyp = yystpcpy (yyp, yytname[YYTRANSLATE (yychar)]);
-+
-+ if (yycount < 5)
-+ {
-+ yycount = 0;
-+ for (yyx = yyn < 0 ? -yyn : 0;
-+ yyx < (int) (sizeof (yytname) / sizeof (char *));
-+ yyx++)
-+ if (yycheck[yyx + yyn] == yyx)
-+ {
-+ const char *yyq = ! yycount ? ", expecting " : " or ";
-+ yyp = yystpcpy (yyp, yyq);
-+ yyp = yystpcpy (yyp, yytname[yyx]);
-+ yycount++;
-+ }
-+ }
-+ yyerror (yymsg);
-+ YYSTACK_FREE (yymsg);
-+ }
-+ else
-+ yyerror ("parse error; also virtual memory exhausted");
-+ }
-+ else
-+#endif /* defined (YYERROR_VERBOSE) */
-+ yyerror ("parse error");
-+ }
-+ goto yyerrlab1;
-+
-+
-+/*--------------------------------------------------.
-+| yyerrlab1 -- error raised explicitly by an action |
-+`--------------------------------------------------*/
-+yyerrlab1:
-+ if (yyerrstatus == 3)
-+ {
-+ /* If just tried and failed to reuse lookahead token after an
-+ error, discard it. */
-+
-+ /* return failure if at end of input */
-+ if (yychar == YYEOF)
-+ YYABORT;
-+ YYDPRINTF ((stderr, "Discarding token %d (%s).\n",
-+ yychar, yytname[yychar1]));
-+ yychar = YYEMPTY;
-+ }
-+
-+ /* Else will try to reuse lookahead token after shifting the error
-+ token. */
-+
-+ yyerrstatus = 3; /* Each real token shifted decrements this */
-+
-+ goto yyerrhandle;
-+
-+
-+/*-------------------------------------------------------------------.
-+| yyerrdefault -- current state does not do anything special for the |
-+| error token. |
-+`-------------------------------------------------------------------*/
-+yyerrdefault:
-+#if 0
-+ /* This is wrong; only states that explicitly want error tokens
-+ should shift them. */
-+
-+ /* If its default is to accept any token, ok. Otherwise pop it. */
-+ yyn = yydefact[yystate];
-+ if (yyn)
-+ goto yydefault;
-+#endif
-+
-+
-+/*---------------------------------------------------------------.
-+| yyerrpop -- pop the current state because it cannot handle the |
-+| error token |
-+`---------------------------------------------------------------*/
-+yyerrpop:
-+ if (yyssp == yyss)
-+ YYABORT;
-+ yyvsp--;
-+ yystate = *--yyssp;
-+#if YYLSP_NEEDED
-+ yylsp--;
-+#endif
-+
-+#if YYDEBUG
-+ if (yydebug)
-+ {
-+ short *yyssp1 = yyss - 1;
-+ YYFPRINTF (stderr, "Error: state stack now");
-+ while (yyssp1 != yyssp)
-+ YYFPRINTF (stderr, " %d", *++yyssp1);
-+ YYFPRINTF (stderr, "\n");
-+ }
-+#endif
-+
-+/*--------------.
-+| yyerrhandle. |
-+`--------------*/
-+yyerrhandle:
-+ yyn = yypact[yystate];
-+ if (yyn == YYFLAG)
-+ goto yyerrdefault;
-+
-+ yyn += YYTERROR;
-+ if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != YYTERROR)
-+ goto yyerrdefault;
-+
-+ yyn = yytable[yyn];
-+ if (yyn < 0)
-+ {
-+ if (yyn == YYFLAG)
-+ goto yyerrpop;
-+ yyn = -yyn;
-+ goto yyreduce;
-+ }
-+ else if (yyn == 0)
-+ goto yyerrpop;
-+
-+ if (yyn == YYFINAL)
-+ YYACCEPT;
-+
-+ YYDPRINTF ((stderr, "Shifting error token, "));
-+
-+ *++yyvsp = yylval;
-+#if YYLSP_NEEDED
-+ *++yylsp = yylloc;
-+#endif
-+
-+ yystate = yyn;
-+ goto yynewstate;
-+
-+
-+/*-------------------------------------.
-+| yyacceptlab -- YYACCEPT comes here. |
-+`-------------------------------------*/
-+yyacceptlab:
-+ yyresult = 0;
-+ goto yyreturn;
-+
-+/*-----------------------------------.
-+| yyabortlab -- YYABORT comes here. |
-+`-----------------------------------*/
-+yyabortlab:
-+ yyresult = 1;
-+ goto yyreturn;
-+
-+/*---------------------------------------------.
-+| yyoverflowab -- parser overflow comes here. |
-+`---------------------------------------------*/
-+yyoverflowlab:
-+ yyerror ("parser stack overflow");
-+ yyresult = 2;
-+ /* Fall through. */
-+
-+yyreturn:
-+#ifndef yyoverflow
-+ if (yyss != yyssa)
-+ YYSTACK_FREE (yyss);
-+#endif
-+ return yyresult;
-+}
-+#line 205 "plural.y"
-+
-+
-+void
-+internal_function
-+FREE_EXPRESSION (struct expression *exp)
-+{
-+ if (exp == NULL)
-+ return;
-+
-+ /* Handle the recursive case. */
-+ switch (exp->nargs)
-+ {
-+ case 3:
-+ FREE_EXPRESSION (exp->val.args[2]);
-+ /* FALLTHROUGH */
-+ case 2:
-+ FREE_EXPRESSION (exp->val.args[1]);
-+ /* FALLTHROUGH */
-+ case 1:
-+ FREE_EXPRESSION (exp->val.args[0]);
-+ /* FALLTHROUGH */
-+ default:
-+ break;
-+ }
-+
-+ free (exp);
-+}
-+
-+
-+static int
-+yylex (YYSTYPE *lval, const char **pexp)
-+{
-+ const char *exp = *pexp;
-+ int result;
-+
-+ while (1)
-+ {
-+ if (exp[0] == '\0')
-+ {
-+ *pexp = exp;
-+ return YYEOF;
-+ }
-+
-+ if (exp[0] != ' ' && exp[0] != '\t')
-+ break;
-+
-+ ++exp;
-+ }
-+
-+ result = *exp++;
-+ switch (result)
-+ {
-+ case '0': case '1': case '2': case '3': case '4':
-+ case '5': case '6': case '7': case '8': case '9':
-+ {
-+ unsigned long int n = result - '0';
-+ while (exp[0] >= '0' && exp[0] <= '9')
-+ {
-+ n *= 10;
-+ n += exp[0] - '0';
-+ ++exp;
-+ }
-+ lval->num = n;
-+ result = NUMBER;
-+ }
-+ break;
-+
-+ case '=':
-+ if (exp[0] == '=')
-+ {
-+ ++exp;
-+ lval->op = equal;
-+ result = EQUOP2;
-+ }
-+ else
-+ result = YYERRCODE;
-+ break;
-+
-+ case '!':
-+ if (exp[0] == '=')
-+ {
-+ ++exp;
-+ lval->op = not_equal;
-+ result = EQUOP2;
-+ }
-+ break;
-+
-+ case '&':
-+ case '|':
-+ if (exp[0] == result)
-+ ++exp;
-+ else
-+ result = YYERRCODE;
-+ break;
-+
-+ case '<':
-+ if (exp[0] == '=')
-+ {
-+ ++exp;
-+ lval->op = less_or_equal;
-+ }
-+ else
-+ lval->op = less_than;
-+ result = CMPOP2;
-+ break;
-+
-+ case '>':
-+ if (exp[0] == '=')
-+ {
-+ ++exp;
-+ lval->op = greater_or_equal;
-+ }
-+ else
-+ lval->op = greater_than;
-+ result = CMPOP2;
-+ break;
-+
-+ case '*':
-+ lval->op = mult;
-+ result = MULOP2;
-+ break;
-+
-+ case '/':
-+ lval->op = divide;
-+ result = MULOP2;
-+ break;
-+
-+ case '%':
-+ lval->op = module;
-+ result = MULOP2;
-+ break;
-+
-+ case '+':
-+ lval->op = plus;
-+ result = ADDOP2;
-+ break;
-+
-+ case '-':
-+ lval->op = minus;
-+ result = ADDOP2;
-+ break;
-+
-+ case 'n':
-+ case '?':
-+ case ':':
-+ case '(':
-+ case ')':
-+ /* Nothing, just return the character. */
-+ break;
-+
-+ case ';':
-+ case '\n':
-+ case '\0':
-+ /* Be safe and let the user call this function again. */
-+ --exp;
-+ result = YYEOF;
-+ break;
-+
-+ default:
-+ result = YYERRCODE;
-+#if YYDEBUG != 0
-+ --exp;
-+#endif
-+ break;
-+ }
-+
-+ *pexp = exp;
-+
-+ return result;
-+}
-+
-+
-+static void
-+yyerror (const char *str)
-+{
-+ /* Do nothing. We don't print error messages here. */
-+}
---- lrzsz-0.12.20.safe/intl/plural-exp.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/plural-exp.c 2004-09-12 14:40:34.578714192 -0400
-@@ -0,0 +1,154 @@
-+/* Expression parsing for plural form selection.
-+ Copyright (C) 2000-2001, 2003 Free Software Foundation, Inc.
-+ Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifdef HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+#include <ctype.h>
-+#include <stdlib.h>
-+#include <string.h>
-+
-+#include "plural-exp.h"
-+
-+#if (defined __GNUC__ && !defined __APPLE_CC__) \
-+ || (defined __STDC_VERSION__ && __STDC_VERSION__ >= 199901L)
-+
-+/* These structs are the constant expression for the germanic plural
-+ form determination. It represents the expression "n != 1". */
-+static const struct expression plvar =
-+{
-+ .nargs = 0,
-+ .operation = var,
-+};
-+static const struct expression plone =
-+{
-+ .nargs = 0,
-+ .operation = num,
-+ .val =
-+ {
-+ .num = 1
-+ }
-+};
-+struct expression GERMANIC_PLURAL =
-+{
-+ .nargs = 2,
-+ .operation = not_equal,
-+ .val =
-+ {
-+ .args =
-+ {
-+ [0] = (struct expression *) &plvar,
-+ [1] = (struct expression *) &plone
-+ }
-+ }
-+};
-+
-+# define INIT_GERMANIC_PLURAL()
-+
-+#else
-+
-+/* For compilers without support for ISO C 99 struct/union initializers:
-+ Initialization at run-time. */
-+
-+static struct expression plvar;
-+static struct expression plone;
-+struct expression GERMANIC_PLURAL;
-+
-+static void
-+init_germanic_plural ()
-+{
-+ if (plone.val.num == 0)
-+ {
-+ plvar.nargs = 0;
-+ plvar.operation = var;
-+
-+ plone.nargs = 0;
-+ plone.operation = num;
-+ plone.val.num = 1;
-+
-+ GERMANIC_PLURAL.nargs = 2;
-+ GERMANIC_PLURAL.operation = not_equal;
-+ GERMANIC_PLURAL.val.args[0] = &plvar;
-+ GERMANIC_PLURAL.val.args[1] = &plone;
-+ }
-+}
-+
-+# define INIT_GERMANIC_PLURAL() init_germanic_plural ()
-+
-+#endif
-+
-+void
-+internal_function
-+EXTRACT_PLURAL_EXPRESSION (const char *nullentry, struct expression **pluralp,
-+ unsigned long int *npluralsp)
-+{
-+ if (nullentry != NULL)
-+ {
-+ const char *plural;
-+ const char *nplurals;
-+
-+ plural = strstr (nullentry, "plural=");
-+ nplurals = strstr (nullentry, "nplurals=");
-+ if (plural == NULL || nplurals == NULL)
-+ goto no_plural;
-+ else
-+ {
-+ char *endp;
-+ unsigned long int n;
-+ struct parse_args args;
-+
-+ /* First get the number. */
-+ nplurals += 9;
-+ while (*nplurals != '\0' && isspace ((unsigned char) *nplurals))
-+ ++nplurals;
-+ if (!(*nplurals >= '0' && *nplurals <= '9'))
-+ goto no_plural;
-+#if defined HAVE_STRTOUL || defined _LIBC
-+ n = strtoul (nplurals, &endp, 10);
-+#else
-+ for (endp = nplurals, n = 0; *endp >= '0' && *endp <= '9'; endp++)
-+ n = n * 10 + (*endp - '0');
-+#endif
-+ if (nplurals == endp)
-+ goto no_plural;
-+ *npluralsp = n;
-+
-+ /* Due to the restrictions bison imposes onto the interface of the
-+ scanner function we have to put the input string and the result
-+ passed up from the parser into the same structure which address
-+ is passed down to the parser. */
-+ plural += 7;
-+ args.cp = plural;
-+ if (PLURAL_PARSE (&args) != 0)
-+ goto no_plural;
-+ *pluralp = args.res;
-+ }
-+ }
-+ else
-+ {
-+ /* By default we are using the Germanic form: singular form only
-+ for `one', the plural form otherwise. Yes, this is also what
-+ English is using since English is a Germanic language. */
-+ no_plural:
-+ INIT_GERMANIC_PLURAL ();
-+ *pluralp = &GERMANIC_PLURAL;
-+ *npluralsp = 2;
-+ }
-+}
---- lrzsz-0.12.20.safe/intl/plural-exp.h 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/plural-exp.h 2004-09-12 14:40:34.584713280 -0400
-@@ -0,0 +1,118 @@
-+/* Expression parsing and evaluation for plural form selection.
-+ Copyright (C) 2000-2003 Free Software Foundation, Inc.
-+ Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifndef _PLURAL_EXP_H
-+#define _PLURAL_EXP_H
-+
-+#ifndef internal_function
-+# define internal_function
-+#endif
-+
-+#ifndef attribute_hidden
-+# define attribute_hidden
-+#endif
-+
-+
-+/* This is the representation of the expressions to determine the
-+ plural form. */
-+struct expression
-+{
-+ int nargs; /* Number of arguments. */
-+ enum operator
-+ {
-+ /* Without arguments: */
-+ var, /* The variable "n". */
-+ num, /* Decimal number. */
-+ /* Unary operators: */
-+ lnot, /* Logical NOT. */
-+ /* Binary operators: */
-+ mult, /* Multiplication. */
-+ divide, /* Division. */
-+ module, /* Modulo operation. */
-+ plus, /* Addition. */
-+ minus, /* Subtraction. */
-+ less_than, /* Comparison. */
-+ greater_than, /* Comparison. */
-+ less_or_equal, /* Comparison. */
-+ greater_or_equal, /* Comparison. */
-+ equal, /* Comparison for equality. */
-+ not_equal, /* Comparison for inequality. */
-+ land, /* Logical AND. */
-+ lor, /* Logical OR. */
-+ /* Ternary operators: */
-+ qmop /* Question mark operator. */
-+ } operation;
-+ union
-+ {
-+ unsigned long int num; /* Number value for `num'. */
-+ struct expression *args[3]; /* Up to three arguments. */
-+ } val;
-+};
-+
-+/* This is the data structure to pass information to the parser and get
-+ the result in a thread-safe way. */
-+struct parse_args
-+{
-+ const char *cp;
-+ struct expression *res;
-+};
-+
-+
-+/* Names for the libintl functions are a problem. This source code is used
-+ 1. in the GNU C Library library,
-+ 2. in the GNU libintl library,
-+ 3. in the GNU gettext tools.
-+ The function names in each situation must be different, to allow for
-+ binary incompatible changes in 'struct expression'. Furthermore,
-+ 1. in the GNU C Library library, the names have a __ prefix,
-+ 2.+3. in the GNU libintl library and in the GNU gettext tools, the names
-+ must follow ANSI C and not start with __.
-+ So we have to distinguish the three cases. */
-+#ifdef _LIBC
-+# define FREE_EXPRESSION __gettext_free_exp
-+# define PLURAL_PARSE __gettextparse
-+# define GERMANIC_PLURAL __gettext_germanic_plural
-+# define EXTRACT_PLURAL_EXPRESSION __gettext_extract_plural
-+#elif defined (IN_LIBINTL)
-+# define FREE_EXPRESSION libintl_gettext_free_exp
-+# define PLURAL_PARSE libintl_gettextparse
-+# define GERMANIC_PLURAL libintl_gettext_germanic_plural
-+# define EXTRACT_PLURAL_EXPRESSION libintl_gettext_extract_plural
-+#else
-+# define FREE_EXPRESSION free_plural_expression
-+# define PLURAL_PARSE parse_plural_expression
-+# define GERMANIC_PLURAL germanic_plural
-+# define EXTRACT_PLURAL_EXPRESSION extract_plural_expression
-+#endif
-+
-+extern void FREE_EXPRESSION (struct expression *exp)
-+ internal_function;
-+extern int PLURAL_PARSE (void *arg);
-+extern struct expression GERMANIC_PLURAL attribute_hidden;
-+extern void EXTRACT_PLURAL_EXPRESSION (const char *nullentry,
-+ struct expression **pluralp,
-+ unsigned long int *npluralsp)
-+ internal_function;
-+
-+#if !defined (_LIBC) && !defined (IN_LIBINTL)
-+extern unsigned long int plural_eval (struct expression *pexp,
-+ unsigned long int n);
-+#endif
-+
-+#endif /* _PLURAL_EXP_H */
---- lrzsz-0.12.20.safe/intl/plural.y 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/plural.y 2004-09-12 14:40:34.589712520 -0400
-@@ -0,0 +1,381 @@
-+%{
-+/* Expression parsing for plural form selection.
-+ Copyright (C) 2000-2001, 2003 Free Software Foundation, Inc.
-+ Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+/* The bison generated parser uses alloca. AIX 3 forces us to put this
-+ declaration at the beginning of the file. The declaration in bison's
-+ skeleton file comes too late. This must come before <config.h>
-+ because <config.h> may include arbitrary system headers. */
-+#if defined _AIX && !defined __GNUC__
-+ #pragma alloca
-+#endif
-+
-+#ifdef HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+#include <stddef.h>
-+#include <stdlib.h>
-+#include "plural-exp.h"
-+
-+/* The main function generated by the parser is called __gettextparse,
-+ but we want it to be called PLURAL_PARSE. */
-+#ifndef _LIBC
-+# define __gettextparse PLURAL_PARSE
-+#endif
-+
-+#define YYLEX_PARAM &((struct parse_args *) arg)->cp
-+#define YYPARSE_PARAM arg
-+%}
-+%pure_parser
-+%expect 7
-+
-+%union {
-+ unsigned long int num;
-+ enum operator op;
-+ struct expression *exp;
-+}
-+
-+%{
-+/* Prototypes for local functions. */
-+static int yylex (YYSTYPE *lval, const char **pexp);
-+static void yyerror (const char *str);
-+
-+/* Allocation of expressions. */
-+
-+static struct expression *
-+new_exp (int nargs, enum operator op, struct expression * const *args)
-+{
-+ int i;
-+ struct expression *newp;
-+
-+ /* If any of the argument could not be malloc'ed, just return NULL. */
-+ for (i = nargs - 1; i >= 0; i--)
-+ if (args[i] == NULL)
-+ goto fail;
-+
-+ /* Allocate a new expression. */
-+ newp = (struct expression *) malloc (sizeof (*newp));
-+ if (newp != NULL)
-+ {
-+ newp->nargs = nargs;
-+ newp->operation = op;
-+ for (i = nargs - 1; i >= 0; i--)
-+ newp->val.args[i] = args[i];
-+ return newp;
-+ }
-+
-+ fail:
-+ for (i = nargs - 1; i >= 0; i--)
-+ FREE_EXPRESSION (args[i]);
-+
-+ return NULL;
-+}
-+
-+static inline struct expression *
-+new_exp_0 (enum operator op)
-+{
-+ return new_exp (0, op, NULL);
-+}
-+
-+static inline struct expression *
-+new_exp_1 (enum operator op, struct expression *right)
-+{
-+ struct expression *args[1];
-+
-+ args[0] = right;
-+ return new_exp (1, op, args);
-+}
-+
-+static struct expression *
-+new_exp_2 (enum operator op, struct expression *left, struct expression *right)
-+{
-+ struct expression *args[2];
-+
-+ args[0] = left;
-+ args[1] = right;
-+ return new_exp (2, op, args);
-+}
-+
-+static inline struct expression *
-+new_exp_3 (enum operator op, struct expression *bexp,
-+ struct expression *tbranch, struct expression *fbranch)
-+{
-+ struct expression *args[3];
-+
-+ args[0] = bexp;
-+ args[1] = tbranch;
-+ args[2] = fbranch;
-+ return new_exp (3, op, args);
-+}
-+
-+%}
-+
-+/* This declares that all operators have the same associativity and the
-+ precedence order as in C. See [Harbison, Steele: C, A Reference Manual].
-+ There is no unary minus and no bitwise operators.
-+ Operators with the same syntactic behaviour have been merged into a single
-+ token, to save space in the array generated by bison. */
-+%right '?' /* ? */
-+%left '|' /* || */
-+%left '&' /* && */
-+%left EQUOP2 /* == != */
-+%left CMPOP2 /* < > <= >= */
-+%left ADDOP2 /* + - */
-+%left MULOP2 /* * / % */
-+%right '!' /* ! */
-+
-+%token <op> EQUOP2 CMPOP2 ADDOP2 MULOP2
-+%token <num> NUMBER
-+%type <exp> exp
-+
-+%%
-+
-+start: exp
-+ {
-+ if ($1 == NULL)
-+ YYABORT;
-+ ((struct parse_args *) arg)->res = $1;
-+ }
-+ ;
-+
-+exp: exp '?' exp ':' exp
-+ {
-+ $$ = new_exp_3 (qmop, $1, $3, $5);
-+ }
-+ | exp '|' exp
-+ {
-+ $$ = new_exp_2 (lor, $1, $3);
-+ }
-+ | exp '&' exp
-+ {
-+ $$ = new_exp_2 (land, $1, $3);
-+ }
-+ | exp EQUOP2 exp
-+ {
-+ $$ = new_exp_2 ($2, $1, $3);
-+ }
-+ | exp CMPOP2 exp
-+ {
-+ $$ = new_exp_2 ($2, $1, $3);
-+ }
-+ | exp ADDOP2 exp
-+ {
-+ $$ = new_exp_2 ($2, $1, $3);
-+ }
-+ | exp MULOP2 exp
-+ {
-+ $$ = new_exp_2 ($2, $1, $3);
-+ }
-+ | '!' exp
-+ {
-+ $$ = new_exp_1 (lnot, $2);
-+ }
-+ | 'n'
-+ {
-+ $$ = new_exp_0 (var);
-+ }
-+ | NUMBER
-+ {
-+ if (($$ = new_exp_0 (num)) != NULL)
-+ $$->val.num = $1;
-+ }
-+ | '(' exp ')'
-+ {
-+ $$ = $2;
-+ }
-+ ;
-+
-+%%
-+
-+void
-+internal_function
-+FREE_EXPRESSION (struct expression *exp)
-+{
-+ if (exp == NULL)
-+ return;
-+
-+ /* Handle the recursive case. */
-+ switch (exp->nargs)
-+ {
-+ case 3:
-+ FREE_EXPRESSION (exp->val.args[2]);
-+ /* FALLTHROUGH */
-+ case 2:
-+ FREE_EXPRESSION (exp->val.args[1]);
-+ /* FALLTHROUGH */
-+ case 1:
-+ FREE_EXPRESSION (exp->val.args[0]);
-+ /* FALLTHROUGH */
-+ default:
-+ break;
-+ }
-+
-+ free (exp);
-+}
-+
-+
-+static int
-+yylex (YYSTYPE *lval, const char **pexp)
-+{
-+ const char *exp = *pexp;
-+ int result;
-+
-+ while (1)
-+ {
-+ if (exp[0] == '\0')
-+ {
-+ *pexp = exp;
-+ return YYEOF;
-+ }
-+
-+ if (exp[0] != ' ' && exp[0] != '\t')
-+ break;
-+
-+ ++exp;
-+ }
-+
-+ result = *exp++;
-+ switch (result)
-+ {
-+ case '0': case '1': case '2': case '3': case '4':
-+ case '5': case '6': case '7': case '8': case '9':
-+ {
-+ unsigned long int n = result - '0';
-+ while (exp[0] >= '0' && exp[0] <= '9')
-+ {
-+ n *= 10;
-+ n += exp[0] - '0';
-+ ++exp;
-+ }
-+ lval->num = n;
-+ result = NUMBER;
-+ }
-+ break;
-+
-+ case '=':
-+ if (exp[0] == '=')
-+ {
-+ ++exp;
-+ lval->op = equal;
-+ result = EQUOP2;
-+ }
-+ else
-+ result = YYERRCODE;
-+ break;
-+
-+ case '!':
-+ if (exp[0] == '=')
-+ {
-+ ++exp;
-+ lval->op = not_equal;
-+ result = EQUOP2;
-+ }
-+ break;
-+
-+ case '&':
-+ case '|':
-+ if (exp[0] == result)
-+ ++exp;
-+ else
-+ result = YYERRCODE;
-+ break;
-+
-+ case '<':
-+ if (exp[0] == '=')
-+ {
-+ ++exp;
-+ lval->op = less_or_equal;
-+ }
-+ else
-+ lval->op = less_than;
-+ result = CMPOP2;
-+ break;
-+
-+ case '>':
-+ if (exp[0] == '=')
-+ {
-+ ++exp;
-+ lval->op = greater_or_equal;
-+ }
-+ else
-+ lval->op = greater_than;
-+ result = CMPOP2;
-+ break;
-+
-+ case '*':
-+ lval->op = mult;
-+ result = MULOP2;
-+ break;
-+
-+ case '/':
-+ lval->op = divide;
-+ result = MULOP2;
-+ break;
-+
-+ case '%':
-+ lval->op = module;
-+ result = MULOP2;
-+ break;
-+
-+ case '+':
-+ lval->op = plus;
-+ result = ADDOP2;
-+ break;
-+
-+ case '-':
-+ lval->op = minus;
-+ result = ADDOP2;
-+ break;
-+
-+ case 'n':
-+ case '?':
-+ case ':':
-+ case '(':
-+ case ')':
-+ /* Nothing, just return the character. */
-+ break;
-+
-+ case ';':
-+ case '\n':
-+ case '\0':
-+ /* Be safe and let the user call this function again. */
-+ --exp;
-+ result = YYEOF;
-+ break;
-+
-+ default:
-+ result = YYERRCODE;
-+#if YYDEBUG != 0
-+ --exp;
-+#endif
-+ break;
-+ }
-+
-+ *pexp = exp;
-+
-+ return result;
-+}
-+
-+
-+static void
-+yyerror (const char *str)
-+{
-+ /* Do nothing. We don't print error messages here. */
-+}
---- lrzsz-0.12.20.safe/intl/po2tbl.sed.in 1998-04-26 09:20:52.000000000 -0400
-+++ lrzsz-0.12.20/intl/po2tbl.sed.in 1969-12-31 19:00:00.000000000 -0500
-@@ -1,102 +0,0 @@
--# po2tbl.sed - Convert Uniforum style .po file to lookup table for catgets
--# Copyright (C) 1995 Free Software Foundation, Inc.
--# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
--#
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--#
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--#
--1 {
-- i\
--/* Automatically generated by po2tbl.sed from @PACKAGE NAME@.pot. */\
--\
--#if HAVE_CONFIG_H\
--# include <config.h>\
--#endif\
--\
--#include "libgettext.h"\
--\
--const struct _msg_ent _msg_tbl[] = {
-- h
-- s/.*/0/
-- x
--}
--#
--# Write msgid entries in C array form.
--#
--/^msgid/ {
-- s/msgid[ ]*\(".*"\)/ {\1/
-- tb
--# Append the next line
-- :b
-- N
--# Look whether second part is continuation line.
-- s/\(.*\)"\(\n\)"\(.*"\)/\1\2\3/
--# Yes, then branch.
-- ta
--# Because we assume that the input file correctly formed the line
--# just read cannot be again be a msgid line. So it's safe to ignore
--# it.
-- s/\(.*\)\n.*/\1/
-- bc
--# We found a continuation line. But before printing insert '\'.
-- :a
-- s/\(.*\)\(\n.*\)/\1\\\2/
-- P
--# We cannot use D here.
-- s/.*\n\(.*\)/\1/
--# Some buggy seds do not clear the `successful substitution since last ``t'''
--# flag on `N', so we do a `t' here to clear it.
-- tb
--# Not reached
-- :c
-- x
--# The following nice solution is by
--# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
-- td
--# Increment a decimal number in pattern space.
--# First hide trailing `9' digits.
-- :d
-- s/9\(_*\)$/_\1/
-- td
--# Assure at least one digit is available.
-- s/^\(_*\)$/0\1/
--# Increment the last digit.
-- s/8\(_*\)$/9\1/
-- s/7\(_*\)$/8\1/
-- s/6\(_*\)$/7\1/
-- s/5\(_*\)$/6\1/
-- s/4\(_*\)$/5\1/
-- s/3\(_*\)$/4\1/
-- s/2\(_*\)$/3\1/
-- s/1\(_*\)$/2\1/
-- s/0\(_*\)$/1\1/
--# Convert the hidden `9' digits to `0's.
-- s/_/0/g
-- x
-- G
-- s/\(.*\)\n\([0-9]*\)/\1, \2},/
-- s/\(.*\)"$/\1/
-- p
--}
--#
--# Last line.
--#
--$ {
-- i\
--};\
--
-- g
-- s/0*\(.*\)/int _msg_tbl_length = \1;/p
--}
--d
---- lrzsz-0.12.20.safe/intl/printf-args.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/printf-args.c 2004-09-12 14:40:34.595711608 -0400
-@@ -0,0 +1,119 @@
-+/* Decomposed printf argument list.
-+ Copyright (C) 1999, 2002-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifdef HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+/* Specification. */
-+#include "printf-args.h"
-+
-+#ifdef STATIC
-+STATIC
-+#endif
-+int
-+printf_fetchargs (va_list args, arguments *a)
-+{
-+ size_t i;
-+ argument *ap;
-+
-+ for (i = 0, ap = &a->arg[0]; i < a->count; i++, ap++)
-+ switch (ap->type)
-+ {
-+ case TYPE_SCHAR:
-+ ap->a.a_schar = va_arg (args, /*signed char*/ int);
-+ break;
-+ case TYPE_UCHAR:
-+ ap->a.a_uchar = va_arg (args, /*unsigned char*/ int);
-+ break;
-+ case TYPE_SHORT:
-+ ap->a.a_short = va_arg (args, /*short*/ int);
-+ break;
-+ case TYPE_USHORT:
-+ ap->a.a_ushort = va_arg (args, /*unsigned short*/ int);
-+ break;
-+ case TYPE_INT:
-+ ap->a.a_int = va_arg (args, int);
-+ break;
-+ case TYPE_UINT:
-+ ap->a.a_uint = va_arg (args, unsigned int);
-+ break;
-+ case TYPE_LONGINT:
-+ ap->a.a_longint = va_arg (args, long int);
-+ break;
-+ case TYPE_ULONGINT:
-+ ap->a.a_ulongint = va_arg (args, unsigned long int);
-+ break;
-+#ifdef HAVE_LONG_LONG
-+ case TYPE_LONGLONGINT:
-+ ap->a.a_longlongint = va_arg (args, long long int);
-+ break;
-+ case TYPE_ULONGLONGINT:
-+ ap->a.a_ulonglongint = va_arg (args, unsigned long long int);
-+ break;
-+#endif
-+ case TYPE_DOUBLE:
-+ ap->a.a_double = va_arg (args, double);
-+ break;
-+#ifdef HAVE_LONG_DOUBLE
-+ case TYPE_LONGDOUBLE:
-+ ap->a.a_longdouble = va_arg (args, long double);
-+ break;
-+#endif
-+ case TYPE_CHAR:
-+ ap->a.a_char = va_arg (args, int);
-+ break;
-+#ifdef HAVE_WINT_T
-+ case TYPE_WIDE_CHAR:
-+ ap->a.a_wide_char = va_arg (args, wint_t);
-+ break;
-+#endif
-+ case TYPE_STRING:
-+ ap->a.a_string = va_arg (args, const char *);
-+ break;
-+#ifdef HAVE_WCHAR_T
-+ case TYPE_WIDE_STRING:
-+ ap->a.a_wide_string = va_arg (args, const wchar_t *);
-+ break;
-+#endif
-+ case TYPE_POINTER:
-+ ap->a.a_pointer = va_arg (args, void *);
-+ break;
-+ case TYPE_COUNT_SCHAR_POINTER:
-+ ap->a.a_count_schar_pointer = va_arg (args, signed char *);
-+ break;
-+ case TYPE_COUNT_SHORT_POINTER:
-+ ap->a.a_count_short_pointer = va_arg (args, short *);
-+ break;
-+ case TYPE_COUNT_INT_POINTER:
-+ ap->a.a_count_int_pointer = va_arg (args, int *);
-+ break;
-+ case TYPE_COUNT_LONGINT_POINTER:
-+ ap->a.a_count_longint_pointer = va_arg (args, long int *);
-+ break;
-+#ifdef HAVE_LONG_LONG
-+ case TYPE_COUNT_LONGLONGINT_POINTER:
-+ ap->a.a_count_longlongint_pointer = va_arg (args, long long int *);
-+ break;
-+#endif
-+ default:
-+ /* Unknown type. */
-+ return -1;
-+ }
-+ return 0;
-+}
---- lrzsz-0.12.20.safe/intl/printf-args.h 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/printf-args.h 2004-09-12 14:40:34.601710696 -0400
-@@ -0,0 +1,137 @@
-+/* Decomposed printf argument list.
-+ Copyright (C) 1999, 2002-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifndef _PRINTF_ARGS_H
-+#define _PRINTF_ARGS_H
-+
-+/* Get size_t. */
-+#include <stddef.h>
-+
-+/* Get wchar_t. */
-+#ifdef HAVE_WCHAR_T
-+# include <stddef.h>
-+#endif
-+
-+/* Get wint_t. */
-+#ifdef HAVE_WINT_T
-+# include <wchar.h>
-+#endif
-+
-+/* Get va_list. */
-+#include <stdarg.h>
-+
-+
-+/* Argument types */
-+typedef enum
-+{
-+ TYPE_NONE,
-+ TYPE_SCHAR,
-+ TYPE_UCHAR,
-+ TYPE_SHORT,
-+ TYPE_USHORT,
-+ TYPE_INT,
-+ TYPE_UINT,
-+ TYPE_LONGINT,
-+ TYPE_ULONGINT,
-+#ifdef HAVE_LONG_LONG
-+ TYPE_LONGLONGINT,
-+ TYPE_ULONGLONGINT,
-+#endif
-+ TYPE_DOUBLE,
-+#ifdef HAVE_LONG_DOUBLE
-+ TYPE_LONGDOUBLE,
-+#endif
-+ TYPE_CHAR,
-+#ifdef HAVE_WINT_T
-+ TYPE_WIDE_CHAR,
-+#endif
-+ TYPE_STRING,
-+#ifdef HAVE_WCHAR_T
-+ TYPE_WIDE_STRING,
-+#endif
-+ TYPE_POINTER,
-+ TYPE_COUNT_SCHAR_POINTER,
-+ TYPE_COUNT_SHORT_POINTER,
-+ TYPE_COUNT_INT_POINTER,
-+ TYPE_COUNT_LONGINT_POINTER
-+#ifdef HAVE_LONG_LONG
-+, TYPE_COUNT_LONGLONGINT_POINTER
-+#endif
-+} arg_type;
-+
-+/* Polymorphic argument */
-+typedef struct
-+{
-+ arg_type type;
-+ union
-+ {
-+ signed char a_schar;
-+ unsigned char a_uchar;
-+ short a_short;
-+ unsigned short a_ushort;
-+ int a_int;
-+ unsigned int a_uint;
-+ long int a_longint;
-+ unsigned long int a_ulongint;
-+#ifdef HAVE_LONG_LONG
-+ long long int a_longlongint;
-+ unsigned long long int a_ulonglongint;
-+#endif
-+ float a_float;
-+ double a_double;
-+#ifdef HAVE_LONG_DOUBLE
-+ long double a_longdouble;
-+#endif
-+ int a_char;
-+#ifdef HAVE_WINT_T
-+ wint_t a_wide_char;
-+#endif
-+ const char* a_string;
-+#ifdef HAVE_WCHAR_T
-+ const wchar_t* a_wide_string;
-+#endif
-+ void* a_pointer;
-+ signed char * a_count_schar_pointer;
-+ short * a_count_short_pointer;
-+ int * a_count_int_pointer;
-+ long int * a_count_longint_pointer;
-+#ifdef HAVE_LONG_LONG
-+ long long int * a_count_longlongint_pointer;
-+#endif
-+ }
-+ a;
-+}
-+argument;
-+
-+typedef struct
-+{
-+ size_t count;
-+ argument *arg;
-+}
-+arguments;
-+
-+
-+/* Fetch the arguments, putting them into a. */
-+#ifdef STATIC
-+STATIC
-+#else
-+extern
-+#endif
-+int printf_fetchargs (va_list args, arguments *a);
-+
-+#endif /* _PRINTF_ARGS_H */
---- lrzsz-0.12.20.safe/intl/printf.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/printf.c 2004-09-12 14:40:34.607709784 -0400
-@@ -0,0 +1,371 @@
-+/* Formatted output to strings, using POSIX/XSI format strings with positions.
-+ Copyright (C) 2003 Free Software Foundation, Inc.
-+ Written by Bruno Haible <bruno@clisp.org>, 2003.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifdef HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+#ifdef __GNUC__
-+# define alloca __builtin_alloca
-+# define HAVE_ALLOCA 1
-+#else
-+# ifdef _MSC_VER
-+# include <malloc.h>
-+# define alloca _alloca
-+# else
-+# if defined HAVE_ALLOCA_H || defined _LIBC
-+# include <alloca.h>
-+# else
-+# ifdef _AIX
-+ #pragma alloca
-+# else
-+# ifndef alloca
-+char *alloca ();
-+# endif
-+# endif
-+# endif
-+# endif
-+#endif
-+
-+#include <stdio.h>
-+
-+#if !HAVE_POSIX_PRINTF
-+
-+#include <stdlib.h>
-+#include <string.h>
-+
-+/* When building a DLL, we must export some functions. Note that because
-+ the functions are only defined for binary backward compatibility, we
-+ don't need to use __declspec(dllimport) in any case. */
-+#if defined _MSC_VER && BUILDING_DLL
-+# define DLL_EXPORTED __declspec(dllexport)
-+#else
-+# define DLL_EXPORTED
-+#endif
-+
-+#define STATIC static
-+
-+/* Define auxiliary functions declared in "printf-args.h". */
-+#include "printf-args.c"
-+
-+/* Define auxiliary functions declared in "printf-parse.h". */
-+#include "printf-parse.c"
-+
-+/* Define functions declared in "vasnprintf.h". */
-+#define vasnprintf libintl_vasnprintf
-+#include "vasnprintf.c"
-+#if 0 /* not needed */
-+#define asnprintf libintl_asnprintf
-+#include "asnprintf.c"
-+#endif
-+
-+DLL_EXPORTED
-+int
-+libintl_vfprintf (FILE *stream, const char *format, va_list args)
-+{
-+ if (strchr (format, '$') == NULL)
-+ return vfprintf (stream, format, args);
-+ else
-+ {
-+ size_t length;
-+ char *result = libintl_vasnprintf (NULL, &length, format, args);
-+ int retval = -1;
-+ if (result != NULL)
-+ {
-+ if (fwrite (result, 1, length, stream) == length)
-+ retval = length;
-+ free (result);
-+ }
-+ return retval;
-+ }
-+}
-+
-+DLL_EXPORTED
-+int
-+libintl_fprintf (FILE *stream, const char *format, ...)
-+{
-+ va_list args;
-+ int retval;
-+
-+ va_start (args, format);
-+ retval = libintl_vfprintf (stream, format, args);
-+ va_end (args);
-+ return retval;
-+}
-+
-+DLL_EXPORTED
-+int
-+libintl_vprintf (const char *format, va_list args)
-+{
-+ return libintl_vfprintf (stdout, format, args);
-+}
-+
-+DLL_EXPORTED
-+int
-+libintl_printf (const char *format, ...)
-+{
-+ va_list args;
-+ int retval;
-+
-+ va_start (args, format);
-+ retval = libintl_vprintf (format, args);
-+ va_end (args);
-+ return retval;
-+}
-+
-+DLL_EXPORTED
-+int
-+libintl_vsprintf (char *resultbuf, const char *format, va_list args)
-+{
-+ if (strchr (format, '$') == NULL)
-+ return vsprintf (resultbuf, format, args);
-+ else
-+ {
-+ size_t length = (size_t) ~0 / (4 * sizeof (char));
-+ char *result = libintl_vasnprintf (resultbuf, &length, format, args);
-+ if (result != resultbuf)
-+ {
-+ free (result);
-+ return -1;
-+ }
-+ else
-+ return length;
-+ }
-+}
-+
-+DLL_EXPORTED
-+int
-+libintl_sprintf (char *resultbuf, const char *format, ...)
-+{
-+ va_list args;
-+ int retval;
-+
-+ va_start (args, format);
-+ retval = libintl_vsprintf (resultbuf, format, args);
-+ va_end (args);
-+ return retval;
-+}
-+
-+#if HAVE_SNPRINTF
-+
-+# if HAVE_DECL__SNPRINTF
-+ /* Windows. */
-+# define system_vsnprintf _vsnprintf
-+# else
-+ /* Unix. */
-+# define system_vsnprintf vsnprintf
-+# endif
-+
-+DLL_EXPORTED
-+int
-+libintl_vsnprintf (char *resultbuf, size_t length, const char *format, va_list args)
-+{
-+ if (strchr (format, '$') == NULL)
-+ return system_vsnprintf (resultbuf, length, format, args);
-+ else
-+ {
-+ size_t maxlength = length;
-+ char *result = libintl_vasnprintf (resultbuf, &length, format, args);
-+ if (result != resultbuf)
-+ {
-+ if (maxlength > 0)
-+ {
-+ if (length < maxlength)
-+ abort ();
-+ memcpy (resultbuf, result, maxlength - 1);
-+ resultbuf[maxlength - 1] = '\0';
-+ }
-+ free (result);
-+ return -1;
-+ }
-+ else
-+ return length;
-+ }
-+}
-+
-+DLL_EXPORTED
-+int
-+libintl_snprintf (char *resultbuf, size_t length, const char *format, ...)
-+{
-+ va_list args;
-+ int retval;
-+
-+ va_start (args, format);
-+ retval = libintl_vsnprintf (resultbuf, length, format, args);
-+ va_end (args);
-+ return retval;
-+}
-+
-+#endif
-+
-+#if HAVE_ASPRINTF
-+
-+DLL_EXPORTED
-+int
-+libintl_vasprintf (char **resultp, const char *format, va_list args)
-+{
-+ size_t length;
-+ char *result = libintl_vasnprintf (NULL, &length, format, args);
-+ if (result == NULL)
-+ return -1;
-+ *resultp = result;
-+ return length;
-+}
-+
-+DLL_EXPORTED
-+int
-+libintl_asprintf (char **resultp, const char *format, ...)
-+{
-+ va_list args;
-+ int retval;
-+
-+ va_start (args, format);
-+ retval = libintl_vasprintf (resultp, format, args);
-+ va_end (args);
-+ return retval;
-+}
-+
-+#endif
-+
-+#if HAVE_FWPRINTF
-+
-+#include <wchar.h>
-+
-+#define WIDE_CHAR_VERSION 1
-+
-+/* Define auxiliary functions declared in "wprintf-parse.h". */
-+#include "printf-parse.c"
-+
-+/* Define functions declared in "vasnprintf.h". */
-+#define vasnwprintf libintl_vasnwprintf
-+#include "vasnprintf.c"
-+#if 0 /* not needed */
-+#define asnwprintf libintl_asnwprintf
-+#include "asnprintf.c"
-+#endif
-+
-+# if HAVE_DECL__SNWPRINTF
-+ /* Windows. */
-+# define system_vswprintf _vsnwprintf
-+# else
-+ /* Unix. */
-+# define system_vswprintf vswprintf
-+# endif
-+
-+DLL_EXPORTED
-+int
-+libintl_vfwprintf (FILE *stream, const wchar_t *format, va_list args)
-+{
-+ if (wcschr (format, '$') == NULL)
-+ return vfwprintf (stream, format, args);
-+ else
-+ {
-+ size_t length;
-+ wchar_t *result = libintl_vasnwprintf (NULL, &length, format, args);
-+ int retval = -1;
-+ if (result != NULL)
-+ {
-+ size_t i;
-+ for (i = 0; i < length; i++)
-+ if (fputwc (result[i], stream) == WEOF)
-+ break;
-+ if (i == length)
-+ retval = length;
-+ free (result);
-+ }
-+ return retval;
-+ }
-+}
-+
-+DLL_EXPORTED
-+int
-+libintl_fwprintf (FILE *stream, const wchar_t *format, ...)
-+{
-+ va_list args;
-+ int retval;
-+
-+ va_start (args, format);
-+ retval = libintl_vfwprintf (stream, format, args);
-+ va_end (args);
-+ return retval;
-+}
-+
-+DLL_EXPORTED
-+int
-+libintl_vwprintf (const wchar_t *format, va_list args)
-+{
-+ return libintl_vfwprintf (stdout, format, args);
-+}
-+
-+DLL_EXPORTED
-+int
-+libintl_wprintf (const wchar_t *format, ...)
-+{
-+ va_list args;
-+ int retval;
-+
-+ va_start (args, format);
-+ retval = libintl_vwprintf (format, args);
-+ va_end (args);
-+ return retval;
-+}
-+
-+DLL_EXPORTED
-+int
-+libintl_vswprintf (wchar_t *resultbuf, size_t length, const wchar_t *format, va_list args)
-+{
-+ if (wcschr (format, '$') == NULL)
-+ return system_vswprintf (resultbuf, length, format, args);
-+ else
-+ {
-+ size_t maxlength = length;
-+ wchar_t *result = libintl_vasnwprintf (resultbuf, &length, format, args);
-+ if (result != resultbuf)
-+ {
-+ if (maxlength > 0)
-+ {
-+ if (length < maxlength)
-+ abort ();
-+ memcpy (resultbuf, result, (maxlength - 1) * sizeof (wchar_t));
-+ resultbuf[maxlength - 1] = 0;
-+ }
-+ free (result);
-+ return -1;
-+ }
-+ else
-+ return length;
-+ }
-+}
-+
-+DLL_EXPORTED
-+int
-+libintl_swprintf (wchar_t *resultbuf, size_t length, const wchar_t *format, ...)
-+{
-+ va_list args;
-+ int retval;
-+
-+ va_start (args, format);
-+ retval = libintl_vswprintf (resultbuf, length, format, args);
-+ va_end (args);
-+ return retval;
-+}
-+
-+#endif
-+
-+#endif
---- lrzsz-0.12.20.safe/intl/printf-parse.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/printf-parse.c 2004-09-12 14:40:34.622707504 -0400
-@@ -0,0 +1,537 @@
-+/* Formatted output to strings.
-+ Copyright (C) 1999-2000, 2002-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifdef HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+/* Specification. */
-+#if WIDE_CHAR_VERSION
-+# include "wprintf-parse.h"
-+#else
-+# include "printf-parse.h"
-+#endif
-+
-+/* Get size_t, NULL. */
-+#include <stddef.h>
-+
-+/* Get intmax_t. */
-+#if HAVE_STDINT_H_WITH_UINTMAX
-+# include <stdint.h>
-+#endif
-+#if HAVE_INTTYPES_H_WITH_UINTMAX
-+# include <inttypes.h>
-+#endif
-+
-+/* malloc(), realloc(), free(). */
-+#include <stdlib.h>
-+
-+/* Checked size_t computations. */
-+#include "xsize.h"
-+
-+#if WIDE_CHAR_VERSION
-+# define PRINTF_PARSE wprintf_parse
-+# define CHAR_T wchar_t
-+# define DIRECTIVE wchar_t_directive
-+# define DIRECTIVES wchar_t_directives
-+#else
-+# define PRINTF_PARSE printf_parse
-+# define CHAR_T char
-+# define DIRECTIVE char_directive
-+# define DIRECTIVES char_directives
-+#endif
-+
-+#ifdef STATIC
-+STATIC
-+#endif
-+int
-+PRINTF_PARSE (const CHAR_T *format, DIRECTIVES *d, arguments *a)
-+{
-+ const CHAR_T *cp = format; /* pointer into format */
-+ size_t arg_posn = 0; /* number of regular arguments consumed */
-+ size_t d_allocated; /* allocated elements of d->dir */
-+ size_t a_allocated; /* allocated elements of a->arg */
-+ size_t max_width_length = 0;
-+ size_t max_precision_length = 0;
-+
-+ d->count = 0;
-+ d_allocated = 1;
-+ d->dir = malloc (d_allocated * sizeof (DIRECTIVE));
-+ if (d->dir == NULL)
-+ /* Out of memory. */
-+ return -1;
-+
-+ a->count = 0;
-+ a_allocated = 0;
-+ a->arg = NULL;
-+
-+#define REGISTER_ARG(_index_,_type_) \
-+ { \
-+ size_t n = (_index_); \
-+ if (n >= a_allocated) \
-+ { \
-+ size_t memory_size; \
-+ argument *memory; \
-+ \
-+ a_allocated = xtimes (a_allocated, 2); \
-+ if (a_allocated <= n) \
-+ a_allocated = xsum (n, 1); \
-+ memory_size = xtimes (a_allocated, sizeof (argument)); \
-+ if (size_overflow_p (memory_size)) \
-+ /* Overflow, would lead to out of memory. */ \
-+ goto error; \
-+ memory = (a->arg \
-+ ? realloc (a->arg, memory_size) \
-+ : malloc (memory_size)); \
-+ if (memory == NULL) \
-+ /* Out of memory. */ \
-+ goto error; \
-+ a->arg = memory; \
-+ } \
-+ while (a->count <= n) \
-+ a->arg[a->count++].type = TYPE_NONE; \
-+ if (a->arg[n].type == TYPE_NONE) \
-+ a->arg[n].type = (_type_); \
-+ else if (a->arg[n].type != (_type_)) \
-+ /* Ambiguous type for positional argument. */ \
-+ goto error; \
-+ }
-+
-+ while (*cp != '\0')
-+ {
-+ CHAR_T c = *cp++;
-+ if (c == '%')
-+ {
-+ size_t arg_index = ARG_NONE;
-+ DIRECTIVE *dp = &d->dir[d->count];/* pointer to next directive */
-+
-+ /* Initialize the next directive. */
-+ dp->dir_start = cp - 1;
-+ dp->flags = 0;
-+ dp->width_start = NULL;
-+ dp->width_end = NULL;
-+ dp->width_arg_index = ARG_NONE;
-+ dp->precision_start = NULL;
-+ dp->precision_end = NULL;
-+ dp->precision_arg_index = ARG_NONE;
-+ dp->arg_index = ARG_NONE;
-+
-+ /* Test for positional argument. */
-+ if (*cp >= '0' && *cp <= '9')
-+ {
-+ const CHAR_T *np;
-+
-+ for (np = cp; *np >= '0' && *np <= '9'; np++)
-+ ;
-+ if (*np == '$')
-+ {
-+ size_t n = 0;
-+
-+ for (np = cp; *np >= '0' && *np <= '9'; np++)
-+ n = xsum (xtimes (n, 10), *np - '0');
-+ if (n == 0)
-+ /* Positional argument 0. */
-+ goto error;
-+ if (size_overflow_p (n))
-+ /* n too large, would lead to out of memory later. */
-+ goto error;
-+ arg_index = n - 1;
-+ cp = np + 1;
-+ }
-+ }
-+
-+ /* Read the flags. */
-+ for (;;)
-+ {
-+ if (*cp == '\'')
-+ {
-+ dp->flags |= FLAG_GROUP;
-+ cp++;
-+ }
-+ else if (*cp == '-')
-+ {
-+ dp->flags |= FLAG_LEFT;
-+ cp++;
-+ }
-+ else if (*cp == '+')
-+ {
-+ dp->flags |= FLAG_SHOWSIGN;
-+ cp++;
-+ }
-+ else if (*cp == ' ')
-+ {
-+ dp->flags |= FLAG_SPACE;
-+ cp++;
-+ }
-+ else if (*cp == '#')
-+ {
-+ dp->flags |= FLAG_ALT;
-+ cp++;
-+ }
-+ else if (*cp == '0')
-+ {
-+ dp->flags |= FLAG_ZERO;
-+ cp++;
-+ }
-+ else
-+ break;
-+ }
-+
-+ /* Parse the field width. */
-+ if (*cp == '*')
-+ {
-+ dp->width_start = cp;
-+ cp++;
-+ dp->width_end = cp;
-+ if (max_width_length < 1)
-+ max_width_length = 1;
-+
-+ /* Test for positional argument. */
-+ if (*cp >= '0' && *cp <= '9')
-+ {
-+ const CHAR_T *np;
-+
-+ for (np = cp; *np >= '0' && *np <= '9'; np++)
-+ ;
-+ if (*np == '$')
-+ {
-+ size_t n = 0;
-+
-+ for (np = cp; *np >= '0' && *np <= '9'; np++)
-+ n = xsum (xtimes (n, 10), *np - '0');
-+ if (n == 0)
-+ /* Positional argument 0. */
-+ goto error;
-+ if (size_overflow_p (n))
-+ /* n too large, would lead to out of memory later. */
-+ goto error;
-+ dp->width_arg_index = n - 1;
-+ cp = np + 1;
-+ }
-+ }
-+ if (dp->width_arg_index == ARG_NONE)
-+ {
-+ dp->width_arg_index = arg_posn++;
-+ if (dp->width_arg_index == ARG_NONE)
-+ /* arg_posn wrapped around. */
-+ goto error;
-+ }
-+ REGISTER_ARG (dp->width_arg_index, TYPE_INT);
-+ }
-+ else if (*cp >= '0' && *cp <= '9')
-+ {
-+ size_t width_length;
-+
-+ dp->width_start = cp;
-+ for (; *cp >= '0' && *cp <= '9'; cp++)
-+ ;
-+ dp->width_end = cp;
-+ width_length = dp->width_end - dp->width_start;
-+ if (max_width_length < width_length)
-+ max_width_length = width_length;
-+ }
-+
-+ /* Parse the precision. */
-+ if (*cp == '.')
-+ {
-+ cp++;
-+ if (*cp == '*')
-+ {
-+ dp->precision_start = cp - 1;
-+ cp++;
-+ dp->precision_end = cp;
-+ if (max_precision_length < 2)
-+ max_precision_length = 2;
-+
-+ /* Test for positional argument. */
-+ if (*cp >= '0' && *cp <= '9')
-+ {
-+ const CHAR_T *np;
-+
-+ for (np = cp; *np >= '0' && *np <= '9'; np++)
-+ ;
-+ if (*np == '$')
-+ {
-+ size_t n = 0;
-+
-+ for (np = cp; *np >= '0' && *np <= '9'; np++)
-+ n = xsum (xtimes (n, 10), *np - '0');
-+ if (n == 0)
-+ /* Positional argument 0. */
-+ goto error;
-+ if (size_overflow_p (n))
-+ /* n too large, would lead to out of memory
-+ later. */
-+ goto error;
-+ dp->precision_arg_index = n - 1;
-+ cp = np + 1;
-+ }
-+ }
-+ if (dp->precision_arg_index == ARG_NONE)
-+ {
-+ dp->precision_arg_index = arg_posn++;
-+ if (dp->precision_arg_index == ARG_NONE)
-+ /* arg_posn wrapped around. */
-+ goto error;
-+ }
-+ REGISTER_ARG (dp->precision_arg_index, TYPE_INT);
-+ }
-+ else
-+ {
-+ size_t precision_length;
-+
-+ dp->precision_start = cp - 1;
-+ for (; *cp >= '0' && *cp <= '9'; cp++)
-+ ;
-+ dp->precision_end = cp;
-+ precision_length = dp->precision_end - dp->precision_start;
-+ if (max_precision_length < precision_length)
-+ max_precision_length = precision_length;
-+ }
-+ }
-+
-+ {
-+ arg_type type;
-+
-+ /* Parse argument type/size specifiers. */
-+ {
-+ int flags = 0;
-+
-+ for (;;)
-+ {
-+ if (*cp == 'h')
-+ {
-+ flags |= (1 << (flags & 1));
-+ cp++;
-+ }
-+ else if (*cp == 'L')
-+ {
-+ flags |= 4;
-+ cp++;
-+ }
-+ else if (*cp == 'l')
-+ {
-+ flags += 8;
-+ cp++;
-+ }
-+#ifdef HAVE_INTMAX_T
-+ else if (*cp == 'j')
-+ {
-+ if (sizeof (intmax_t) > sizeof (long))
-+ {
-+ /* intmax_t = long long */
-+ flags += 16;
-+ }
-+ else if (sizeof (intmax_t) > sizeof (int))
-+ {
-+ /* intmax_t = long */
-+ flags += 8;
-+ }
-+ cp++;
-+ }
-+#endif
-+ else if (*cp == 'z' || *cp == 'Z')
-+ {
-+ /* 'z' is standardized in ISO C 99, but glibc uses 'Z'
-+ because the warning facility in gcc-2.95.2 understands
-+ only 'Z' (see gcc-2.95.2/gcc/c-common.c:1784). */
-+ if (sizeof (size_t) > sizeof (long))
-+ {
-+ /* size_t = long long */
-+ flags += 16;
-+ }
-+ else if (sizeof (size_t) > sizeof (int))
-+ {
-+ /* size_t = long */
-+ flags += 8;
-+ }
-+ cp++;
-+ }
-+ else if (*cp == 't')
-+ {
-+ if (sizeof (ptrdiff_t) > sizeof (long))
-+ {
-+ /* ptrdiff_t = long long */
-+ flags += 16;
-+ }
-+ else if (sizeof (ptrdiff_t) > sizeof (int))
-+ {
-+ /* ptrdiff_t = long */
-+ flags += 8;
-+ }
-+ cp++;
-+ }
-+ else
-+ break;
-+ }
-+
-+ /* Read the conversion character. */
-+ c = *cp++;
-+ switch (c)
-+ {
-+ case 'd': case 'i':
-+#ifdef HAVE_LONG_LONG
-+ if (flags >= 16 || (flags & 4))
-+ type = TYPE_LONGLONGINT;
-+ else
-+#endif
-+ if (flags >= 8)
-+ type = TYPE_LONGINT;
-+ else if (flags & 2)
-+ type = TYPE_SCHAR;
-+ else if (flags & 1)
-+ type = TYPE_SHORT;
-+ else
-+ type = TYPE_INT;
-+ break;
-+ case 'o': case 'u': case 'x': case 'X':
-+#ifdef HAVE_LONG_LONG
-+ if (flags >= 16 || (flags & 4))
-+ type = TYPE_ULONGLONGINT;
-+ else
-+#endif
-+ if (flags >= 8)
-+ type = TYPE_ULONGINT;
-+ else if (flags & 2)
-+ type = TYPE_UCHAR;
-+ else if (flags & 1)
-+ type = TYPE_USHORT;
-+ else
-+ type = TYPE_UINT;
-+ break;
-+ case 'f': case 'F': case 'e': case 'E': case 'g': case 'G':
-+ case 'a': case 'A':
-+#ifdef HAVE_LONG_DOUBLE
-+ if (flags >= 16 || (flags & 4))
-+ type = TYPE_LONGDOUBLE;
-+ else
-+#endif
-+ type = TYPE_DOUBLE;
-+ break;
-+ case 'c':
-+ if (flags >= 8)
-+#ifdef HAVE_WINT_T
-+ type = TYPE_WIDE_CHAR;
-+#else
-+ goto error;
-+#endif
-+ else
-+ type = TYPE_CHAR;
-+ break;
-+#ifdef HAVE_WINT_T
-+ case 'C':
-+ type = TYPE_WIDE_CHAR;
-+ c = 'c';
-+ break;
-+#endif
-+ case 's':
-+ if (flags >= 8)
-+#ifdef HAVE_WCHAR_T
-+ type = TYPE_WIDE_STRING;
-+#else
-+ goto error;
-+#endif
-+ else
-+ type = TYPE_STRING;
-+ break;
-+#ifdef HAVE_WCHAR_T
-+ case 'S':
-+ type = TYPE_WIDE_STRING;
-+ c = 's';
-+ break;
-+#endif
-+ case 'p':
-+ type = TYPE_POINTER;
-+ break;
-+ case 'n':
-+#ifdef HAVE_LONG_LONG
-+ if (flags >= 16 || (flags & 4))
-+ type = TYPE_COUNT_LONGLONGINT_POINTER;
-+ else
-+#endif
-+ if (flags >= 8)
-+ type = TYPE_COUNT_LONGINT_POINTER;
-+ else if (flags & 2)
-+ type = TYPE_COUNT_SCHAR_POINTER;
-+ else if (flags & 1)
-+ type = TYPE_COUNT_SHORT_POINTER;
-+ else
-+ type = TYPE_COUNT_INT_POINTER;
-+ break;
-+ case '%':
-+ type = TYPE_NONE;
-+ break;
-+ default:
-+ /* Unknown conversion character. */
-+ goto error;
-+ }
-+ }
-+
-+ if (type != TYPE_NONE)
-+ {
-+ dp->arg_index = arg_index;
-+ if (dp->arg_index == ARG_NONE)
-+ {
-+ dp->arg_index = arg_posn++;
-+ if (dp->arg_index == ARG_NONE)
-+ /* arg_posn wrapped around. */
-+ goto error;
-+ }
-+ REGISTER_ARG (dp->arg_index, type);
-+ }
-+ dp->conversion = c;
-+ dp->dir_end = cp;
-+ }
-+
-+ d->count++;
-+ if (d->count >= d_allocated)
-+ {
-+ size_t memory_size;
-+ DIRECTIVE *memory;
-+
-+ d_allocated = xtimes (d_allocated, 2);
-+ memory_size = xtimes (d_allocated, sizeof (DIRECTIVE));
-+ if (size_overflow_p (memory_size))
-+ /* Overflow, would lead to out of memory. */
-+ goto error;
-+ memory = realloc (d->dir, memory_size);
-+ if (memory == NULL)
-+ /* Out of memory. */
-+ goto error;
-+ d->dir = memory;
-+ }
-+ }
-+ }
-+ d->dir[d->count].dir_start = cp;
-+
-+ d->max_width_length = max_width_length;
-+ d->max_precision_length = max_precision_length;
-+ return 0;
-+
-+error:
-+ if (a->arg)
-+ free (a->arg);
-+ if (d->dir)
-+ free (d->dir);
-+ return -1;
-+}
-+
-+#undef DIRECTIVES
-+#undef DIRECTIVE
-+#undef CHAR_T
-+#undef PRINTF_PARSE
---- lrzsz-0.12.20.safe/intl/printf-parse.h 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/printf-parse.h 2004-09-12 14:40:34.628706592 -0400
-@@ -0,0 +1,75 @@
-+/* Parse printf format string.
-+ Copyright (C) 1999, 2002-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifndef _PRINTF_PARSE_H
-+#define _PRINTF_PARSE_H
-+
-+#include "printf-args.h"
-+
-+
-+/* Flags */
-+#define FLAG_GROUP 1 /* ' flag */
-+#define FLAG_LEFT 2 /* - flag */
-+#define FLAG_SHOWSIGN 4 /* + flag */
-+#define FLAG_SPACE 8 /* space flag */
-+#define FLAG_ALT 16 /* # flag */
-+#define FLAG_ZERO 32
-+
-+/* arg_index value indicating that no argument is consumed. */
-+#define ARG_NONE (~(size_t)0)
-+
-+/* A parsed directive. */
-+typedef struct
-+{
-+ const char* dir_start;
-+ const char* dir_end;
-+ int flags;
-+ const char* width_start;
-+ const char* width_end;
-+ size_t width_arg_index;
-+ const char* precision_start;
-+ const char* precision_end;
-+ size_t precision_arg_index;
-+ char conversion; /* d i o u x X f e E g G c s p n U % but not C S */
-+ size_t arg_index;
-+}
-+char_directive;
-+
-+/* A parsed format string. */
-+typedef struct
-+{
-+ size_t count;
-+ char_directive *dir;
-+ size_t max_width_length;
-+ size_t max_precision_length;
-+}
-+char_directives;
-+
-+
-+/* Parses the format string. Fills in the number N of directives, and fills
-+ in directives[0], ..., directives[N-1], and sets directives[N].dir_start
-+ to the end of the format string. Also fills in the arg_type fields of the
-+ arguments and the needed count of arguments. */
-+#ifdef STATIC
-+STATIC
-+#else
-+extern
-+#endif
-+int printf_parse (const char *format, char_directives *d, arguments *a);
-+
-+#endif /* _PRINTF_PARSE_H */
---- lrzsz-0.12.20.safe/intl/ref-add.sin 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/ref-add.sin 2004-09-12 14:40:34.633705832 -0400
-@@ -0,0 +1,31 @@
-+# Add this package to a list of references stored in a text file.
-+#
-+# Copyright (C) 2000 Free Software Foundation, Inc.
-+#
-+# This program is free software; you can redistribute it and/or modify it
-+# under the terms of the GNU Library General Public License as published
-+# by the Free Software Foundation; either version 2, or (at your option)
-+# any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# Library General Public License for more details.
-+#
-+# You should have received a copy of the GNU Library General Public
-+# License along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+# USA.
-+#
-+# Written by Bruno Haible <haible@clisp.cons.org>.
-+#
-+/^# Packages using this file: / {
-+ s/# Packages using this file://
-+ ta
-+ :a
-+ s/ @PACKAGE@ / @PACKAGE@ /
-+ tb
-+ s/ $/ @PACKAGE@ /
-+ :b
-+ s/^/# Packages using this file:/
-+}
---- lrzsz-0.12.20.safe/intl/ref-del.sin 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/ref-del.sin 2004-09-12 14:40:34.638705072 -0400
-@@ -0,0 +1,26 @@
-+# Remove this package from a list of references stored in a text file.
-+#
-+# Copyright (C) 2000 Free Software Foundation, Inc.
-+#
-+# This program is free software; you can redistribute it and/or modify it
-+# under the terms of the GNU Library General Public License as published
-+# by the Free Software Foundation; either version 2, or (at your option)
-+# any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# Library General Public License for more details.
-+#
-+# You should have received a copy of the GNU Library General Public
-+# License along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+# USA.
-+#
-+# Written by Bruno Haible <haible@clisp.cons.org>.
-+#
-+/^# Packages using this file: / {
-+ s/# Packages using this file://
-+ s/ @PACKAGE@ / /
-+ s/^/# Packages using this file:/
-+}
---- lrzsz-0.12.20.safe/intl/relocatable.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/relocatable.c 2004-09-12 14:40:34.644704160 -0400
-@@ -0,0 +1,449 @@
-+/* Provide relocatable packages.
-+ Copyright (C) 2003 Free Software Foundation, Inc.
-+ Written by Bruno Haible <bruno@clisp.org>, 2003.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+
-+/* Tell glibc's <stdio.h> to provide a prototype for getline().
-+ This must come before <config.h> because <config.h> may include
-+ <features.h>, and once <features.h> has been included, it's too late. */
-+#ifndef _GNU_SOURCE
-+# define _GNU_SOURCE 1
-+#endif
-+
-+#ifdef HAVE_CONFIG_H
-+# include "config.h"
-+#endif
-+
-+/* Specification. */
-+#include "relocatable.h"
-+
-+#if ENABLE_RELOCATABLE
-+
-+#include <stddef.h>
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <string.h>
-+
-+#ifdef NO_XMALLOC
-+# define xmalloc malloc
-+#else
-+# include "xalloc.h"
-+#endif
-+
-+#if defined _WIN32 || defined __WIN32__
-+# define WIN32_LEAN_AND_MEAN
-+# include <windows.h>
-+#endif
-+
-+#if DEPENDS_ON_LIBCHARSET
-+# include <libcharset.h>
-+#endif
-+#if DEPENDS_ON_LIBICONV && HAVE_ICONV
-+# include <iconv.h>
-+#endif
-+#if DEPENDS_ON_LIBINTL && ENABLE_NLS
-+# include <libintl.h>
-+#endif
-+
-+/* Faked cheap 'bool'. */
-+#undef bool
-+#undef false
-+#undef true
-+#define bool int
-+#define false 0
-+#define true 1
-+
-+/* Pathname support.
-+ ISSLASH(C) tests whether C is a directory separator character.
-+ IS_PATH_WITH_DIR(P) tests whether P contains a directory specification.
-+ */
-+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
-+ /* Win32, OS/2, DOS */
-+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
-+# define HAS_DEVICE(P) \
-+ ((((P)[0] >= 'A' && (P)[0] <= 'Z') || ((P)[0] >= 'a' && (P)[0] <= 'z')) \
-+ && (P)[1] == ':')
-+# define IS_PATH_WITH_DIR(P) \
-+ (strchr (P, '/') != NULL || strchr (P, '\\') != NULL || HAS_DEVICE (P))
-+# define FILESYSTEM_PREFIX_LEN(P) (HAS_DEVICE (P) ? 2 : 0)
-+#else
-+ /* Unix */
-+# define ISSLASH(C) ((C) == '/')
-+# define IS_PATH_WITH_DIR(P) (strchr (P, '/') != NULL)
-+# define FILESYSTEM_PREFIX_LEN(P) 0
-+#endif
-+
-+/* Original installation prefix. */
-+static char *orig_prefix;
-+static size_t orig_prefix_len;
-+/* Current installation prefix. */
-+static char *curr_prefix;
-+static size_t curr_prefix_len;
-+/* These prefixes do not end in a slash. Anything that will be concatenated
-+ to them must start with a slash. */
-+
-+/* Sets the original and the current installation prefix of this module.
-+ Relocation simply replaces a pathname starting with the original prefix
-+ by the corresponding pathname with the current prefix instead. Both
-+ prefixes should be directory names without trailing slash (i.e. use ""
-+ instead of "/"). */
-+static void
-+set_this_relocation_prefix (const char *orig_prefix_arg,
-+ const char *curr_prefix_arg)
-+{
-+ if (orig_prefix_arg != NULL && curr_prefix_arg != NULL
-+ /* Optimization: if orig_prefix and curr_prefix are equal, the
-+ relocation is a nop. */
-+ && strcmp (orig_prefix_arg, curr_prefix_arg) != 0)
-+ {
-+ /* Duplicate the argument strings. */
-+ char *memory;
-+
-+ orig_prefix_len = strlen (orig_prefix_arg);
-+ curr_prefix_len = strlen (curr_prefix_arg);
-+ memory = (char *) xmalloc (orig_prefix_len + 1 + curr_prefix_len + 1);
-+#ifdef NO_XMALLOC
-+ if (memory != NULL)
-+#endif
-+ {
-+ memcpy (memory, orig_prefix_arg, orig_prefix_len + 1);
-+ orig_prefix = memory;
-+ memory += orig_prefix_len + 1;
-+ memcpy (memory, curr_prefix_arg, curr_prefix_len + 1);
-+ curr_prefix = memory;
-+ return;
-+ }
-+ }
-+ orig_prefix = NULL;
-+ curr_prefix = NULL;
-+ /* Don't worry about wasted memory here - this function is usually only
-+ called once. */
-+}
-+
-+/* Sets the original and the current installation prefix of the package.
-+ Relocation simply replaces a pathname starting with the original prefix
-+ by the corresponding pathname with the current prefix instead. Both
-+ prefixes should be directory names without trailing slash (i.e. use ""
-+ instead of "/"). */
-+void
-+set_relocation_prefix (const char *orig_prefix_arg, const char *curr_prefix_arg)
-+{
-+ set_this_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
-+
-+ /* Now notify all dependent libraries. */
-+#if DEPENDS_ON_LIBCHARSET
-+ libcharset_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
-+#endif
-+#if DEPENDS_ON_LIBICONV && HAVE_ICONV && _LIBICONV_VERSION >= 0x0109
-+ libiconv_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
-+#endif
-+#if DEPENDS_ON_LIBINTL && ENABLE_NLS && defined libintl_set_relocation_prefix
-+ libintl_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
-+#endif
-+}
-+
-+#if !defined IN_LIBRARY || (defined PIC && defined INSTALLDIR)
-+
-+/* Convenience function:
-+ Computes the current installation prefix, based on the original
-+ installation prefix, the original installation directory of a particular
-+ file, and the current pathname of this file. Returns NULL upon failure. */
-+#ifdef IN_LIBRARY
-+#define compute_curr_prefix local_compute_curr_prefix
-+static
-+#endif
-+const char *
-+compute_curr_prefix (const char *orig_installprefix,
-+ const char *orig_installdir,
-+ const char *curr_pathname)
-+{
-+ const char *curr_installdir;
-+ const char *rel_installdir;
-+
-+ if (curr_pathname == NULL)
-+ return NULL;
-+
-+ /* Determine the relative installation directory, relative to the prefix.
-+ This is simply the difference between orig_installprefix and
-+ orig_installdir. */
-+ if (strncmp (orig_installprefix, orig_installdir, strlen (orig_installprefix))
-+ != 0)
-+ /* Shouldn't happen - nothing should be installed outside $(prefix). */
-+ return NULL;
-+ rel_installdir = orig_installdir + strlen (orig_installprefix);
-+
-+ /* Determine the current installation directory. */
-+ {
-+ const char *p_base = curr_pathname + FILESYSTEM_PREFIX_LEN (curr_pathname);
-+ const char *p = curr_pathname + strlen (curr_pathname);
-+ char *q;
-+
-+ while (p > p_base)
-+ {
-+ p--;
-+ if (ISSLASH (*p))
-+ break;
-+ }
-+
-+ q = (char *) xmalloc (p - curr_pathname + 1);
-+#ifdef NO_XMALLOC
-+ if (q == NULL)
-+ return NULL;
-+#endif
-+ memcpy (q, curr_pathname, p - curr_pathname);
-+ q[p - curr_pathname] = '\0';
-+ curr_installdir = q;
-+ }
-+
-+ /* Compute the current installation prefix by removing the trailing
-+ rel_installdir from it. */
-+ {
-+ const char *rp = rel_installdir + strlen (rel_installdir);
-+ const char *cp = curr_installdir + strlen (curr_installdir);
-+ const char *cp_base =
-+ curr_installdir + FILESYSTEM_PREFIX_LEN (curr_installdir);
-+
-+ while (rp > rel_installdir && cp > cp_base)
-+ {
-+ bool same = false;
-+ const char *rpi = rp;
-+ const char *cpi = cp;
-+
-+ while (rpi > rel_installdir && cpi > cp_base)
-+ {
-+ rpi--;
-+ cpi--;
-+ if (ISSLASH (*rpi) || ISSLASH (*cpi))
-+ {
-+ if (ISSLASH (*rpi) && ISSLASH (*cpi))
-+ same = true;
-+ break;
-+ }
-+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
-+ /* Win32, OS/2, DOS - case insignificant filesystem */
-+ if ((*rpi >= 'a' && *rpi <= 'z' ? *rpi - 'a' + 'A' : *rpi)
-+ != (*cpi >= 'a' && *cpi <= 'z' ? *cpi - 'a' + 'A' : *cpi))
-+ break;
-+#else
-+ if (*rpi != *cpi)
-+ break;
-+#endif
-+ }
-+ if (!same)
-+ break;
-+ /* The last pathname component was the same. opi and cpi now point
-+ to the slash before it. */
-+ rp = rpi;
-+ cp = cpi;
-+ }
-+
-+ if (rp > rel_installdir)
-+ /* Unexpected: The curr_installdir does not end with rel_installdir. */
-+ return NULL;
-+
-+ {
-+ size_t curr_prefix_len = cp - curr_installdir;
-+ char *curr_prefix;
-+
-+ curr_prefix = (char *) xmalloc (curr_prefix_len + 1);
-+#ifdef NO_XMALLOC
-+ if (curr_prefix == NULL)
-+ return NULL;
-+#endif
-+ memcpy (curr_prefix, curr_installdir, curr_prefix_len);
-+ curr_prefix[curr_prefix_len] = '\0';
-+
-+ return curr_prefix;
-+ }
-+ }
-+}
-+
-+#endif /* !IN_LIBRARY || PIC */
-+
-+#if defined PIC && defined INSTALLDIR
-+
-+/* Full pathname of shared library, or NULL. */
-+static char *shared_library_fullname;
-+
-+#if defined _WIN32 || defined __WIN32__
-+
-+/* Determine the full pathname of the shared library when it is loaded. */
-+
-+BOOL WINAPI
-+DllMain (HINSTANCE module_handle, DWORD event, LPVOID reserved)
-+{
-+ (void) reserved;
-+
-+ if (event == DLL_PROCESS_ATTACH)
-+ {
-+ /* The DLL is being loaded into an application's address range. */
-+ static char location[MAX_PATH];
-+
-+ if (!GetModuleFileName (module_handle, location, sizeof (location)))
-+ /* Shouldn't happen. */
-+ return FALSE;
-+
-+ if (!IS_PATH_WITH_DIR (location))
-+ /* Shouldn't happen. */
-+ return FALSE;
-+
-+ shared_library_fullname = strdup (location);
-+ }
-+
-+ return TRUE;
-+}
-+
-+#else /* Unix */
-+
-+static void
-+find_shared_library_fullname ()
-+{
-+#if defined __linux__ && __GLIBC__ >= 2
-+ /* Linux has /proc/self/maps. glibc 2 has the getline() function. */
-+ FILE *fp;
-+
-+ /* Open the current process' maps file. It describes one VMA per line. */
-+ fp = fopen ("/proc/self/maps", "r");
-+ if (fp)
-+ {
-+ unsigned long address = (unsigned long) &find_shared_library_fullname;
-+ for (;;)
-+ {
-+ unsigned long start, end;
-+ int c;
-+
-+ if (fscanf (fp, "%lx-%lx", &start, &end) != 2)
-+ break;
-+ if (address >= start && address <= end - 1)
-+ {
-+ /* Found it. Now see if this line contains a filename. */
-+ while (c = getc (fp), c != EOF && c != '\n' && c != '/')
-+ continue;
-+ if (c == '/')
-+ {
-+ size_t size;
-+ int len;
-+
-+ ungetc (c, fp);
-+ shared_library_fullname = NULL; size = 0;
-+ len = getline (&shared_library_fullname, &size, fp);
-+ if (len >= 0)
-+ {
-+ /* Success: filled shared_library_fullname. */
-+ if (len > 0 && shared_library_fullname[len - 1] == '\n')
-+ shared_library_fullname[len - 1] = '\0';
-+ }
-+ }
-+ break;
-+ }
-+ while (c = getc (fp), c != EOF && c != '\n')
-+ continue;
-+ }
-+ fclose (fp);
-+ }
-+#endif
-+}
-+
-+#endif /* WIN32 / Unix */
-+
-+/* Return the full pathname of the current shared library.
-+ Return NULL if unknown.
-+ Guaranteed to work only on Linux and Woe32. */
-+static char *
-+get_shared_library_fullname ()
-+{
-+#if !(defined _WIN32 || defined __WIN32__)
-+ static bool tried_find_shared_library_fullname;
-+ if (!tried_find_shared_library_fullname)
-+ {
-+ find_shared_library_fullname ();
-+ tried_find_shared_library_fullname = true;
-+ }
-+#endif
-+ return shared_library_fullname;
-+}
-+
-+#endif /* PIC */
-+
-+/* Returns the pathname, relocated according to the current installation
-+ directory. */
-+const char *
-+relocate (const char *pathname)
-+{
-+#if defined PIC && defined INSTALLDIR
-+ static int initialized;
-+
-+ /* Initialization code for a shared library. */
-+ if (!initialized)
-+ {
-+ /* At this point, orig_prefix and curr_prefix likely have already been
-+ set through the main program's set_program_name_and_installdir
-+ function. This is sufficient in the case that the library has
-+ initially been installed in the same orig_prefix. But we can do
-+ better, to also cover the cases that 1. it has been installed
-+ in a different prefix before being moved to orig_prefix and (later)
-+ to curr_prefix, 2. unlike the program, it has not moved away from
-+ orig_prefix. */
-+ const char *orig_installprefix = INSTALLPREFIX;
-+ const char *orig_installdir = INSTALLDIR;
-+ const char *curr_prefix_better;
-+
-+ curr_prefix_better =
-+ compute_curr_prefix (orig_installprefix, orig_installdir,
-+ get_shared_library_fullname ());
-+ if (curr_prefix_better == NULL)
-+ curr_prefix_better = curr_prefix;
-+
-+ set_relocation_prefix (orig_installprefix, curr_prefix_better);
-+
-+ initialized = 1;
-+ }
-+#endif
-+
-+ /* Note: It is not necessary to perform case insensitive comparison here,
-+ even for DOS-like filesystems, because the pathname argument was
-+ typically created from the same Makefile variable as orig_prefix came
-+ from. */
-+ if (orig_prefix != NULL && curr_prefix != NULL
-+ && strncmp (pathname, orig_prefix, orig_prefix_len) == 0)
-+ {
-+ if (pathname[orig_prefix_len] == '\0')
-+ /* pathname equals orig_prefix. */
-+ return curr_prefix;
-+ if (ISSLASH (pathname[orig_prefix_len]))
-+ {
-+ /* pathname starts with orig_prefix. */
-+ const char *pathname_tail = &pathname[orig_prefix_len];
-+ char *result =
-+ (char *) xmalloc (curr_prefix_len + strlen (pathname_tail) + 1);
-+
-+#ifdef NO_XMALLOC
-+ if (result != NULL)
-+#endif
-+ {
-+ memcpy (result, curr_prefix, curr_prefix_len);
-+ strcpy (result + curr_prefix_len, pathname_tail);
-+ return result;
-+ }
-+ }
-+ }
-+ /* Nothing to relocate. */
-+ return pathname;
-+}
-+
-+#endif
---- lrzsz-0.12.20.safe/intl/relocatable.h 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/relocatable.h 2004-09-12 14:40:34.651703096 -0400
-@@ -0,0 +1,77 @@
-+/* Provide relocatable packages.
-+ Copyright (C) 2003 Free Software Foundation, Inc.
-+ Written by Bruno Haible <bruno@clisp.org>, 2003.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifndef _RELOCATABLE_H
-+#define _RELOCATABLE_H
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+
-+/* This can be enabled through the configure --enable-relocatable option. */
-+#if ENABLE_RELOCATABLE
-+
-+/* When building a DLL, we must export some functions. Note that because
-+ this is a private .h file, we don't need to use __declspec(dllimport)
-+ in any case. */
-+#if defined _MSC_VER && BUILDING_DLL
-+# define RELOCATABLE_DLL_EXPORTED __declspec(dllexport)
-+#else
-+# define RELOCATABLE_DLL_EXPORTED
-+#endif
-+
-+/* Sets the original and the current installation prefix of the package.
-+ Relocation simply replaces a pathname starting with the original prefix
-+ by the corresponding pathname with the current prefix instead. Both
-+ prefixes should be directory names without trailing slash (i.e. use ""
-+ instead of "/"). */
-+extern RELOCATABLE_DLL_EXPORTED void
-+ set_relocation_prefix (const char *orig_prefix,
-+ const char *curr_prefix);
-+
-+/* Returns the pathname, relocated according to the current installation
-+ directory. */
-+extern const char * relocate (const char *pathname);
-+
-+/* Memory management: relocate() leaks memory, because it has to construct
-+ a fresh pathname. If this is a problem because your program calls
-+ relocate() frequently, think about caching the result. */
-+
-+/* Convenience function:
-+ Computes the current installation prefix, based on the original
-+ installation prefix, the original installation directory of a particular
-+ file, and the current pathname of this file. Returns NULL upon failure. */
-+extern const char * compute_curr_prefix (const char *orig_installprefix,
-+ const char *orig_installdir,
-+ const char *curr_pathname);
-+
-+#else
-+
-+/* By default, we use the hardwired pathnames. */
-+#define relocate(pathname) (pathname)
-+
-+#endif
-+
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* _RELOCATABLE_H */
---- lrzsz-0.12.20.safe/intl/textdomain.c 1998-04-26 09:22:37.000000000 -0400
-+++ lrzsz-0.12.20/intl/textdomain.c 2004-09-12 14:40:34.656702336 -0400
-@@ -1,51 +1,60 @@
--/* Implementation of the textdomain(3) function
-- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-- Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-+/* Implementation of the textdomain(3) function.
-+ Copyright (C) 1995-1998, 2000-2003 Free Software Foundation, Inc.
-
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-
- #ifdef HAVE_CONFIG_H
- # include <config.h>
- #endif
-
--#if defined STDC_HEADERS || defined _LIBC
--# include <stdlib.h>
--#endif
-+#include <stdlib.h>
-+#include <string.h>
-
--#if defined STDC_HEADERS || defined HAVE_STRING_H || defined _LIBC
--# include <string.h>
-+#ifdef _LIBC
-+# include <libintl.h>
- #else
--# include <strings.h>
--# ifndef memcpy
--# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
--# endif
-+# include "libgnuintl.h"
- #endif
-+#include "gettextP.h"
-
- #ifdef _LIBC
--# include <libintl.h>
-+/* We have to handle multi-threaded applications. */
-+# include <bits/libc-lock.h>
- #else
--# include "libgettext.h"
-+/* Provide dummy implementation if this is outside glibc. */
-+# define __libc_rwlock_define(CLASS, NAME)
-+# define __libc_rwlock_wrlock(NAME)
-+# define __libc_rwlock_unlock(NAME)
-+#endif
-+
-+/* The internal variables in the standalone libintl.a must have different
-+ names than the internal variables in GNU libc, otherwise programs
-+ using libintl.a cannot be linked statically. */
-+#if !defined _LIBC
-+# define _nl_default_default_domain libintl_nl_default_default_domain
-+# define _nl_current_default_domain libintl_nl_current_default_domain
- #endif
-
- /* @@ end of prolog @@ */
-
- /* Name of the default text domain. */
--extern const char _nl_default_default_domain[];
-+extern const char _nl_default_default_domain[] attribute_hidden;
-
- /* Default text domain in which entries for gettext(3) are to be found. */
--extern const char *_nl_current_default_domain;
-+extern const char *_nl_current_default_domain attribute_hidden;
-
-
- /* Names for the libintl functions are a problem. They must not clash
-@@ -54,50 +63,76 @@
- prefix. So we have to make a difference here. */
- #ifdef _LIBC
- # define TEXTDOMAIN __textdomain
--# define strdup(str) __strdup (str)
-+# ifndef strdup
-+# define strdup(str) __strdup (str)
-+# endif
- #else
--# define TEXTDOMAIN textdomain__
-+# define TEXTDOMAIN libintl_textdomain
- #endif
-
-+/* Lock variable to protect the global data in the gettext implementation. */
-+__libc_rwlock_define (extern, _nl_state_lock attribute_hidden)
-+
- /* Set the current default message catalog to DOMAINNAME.
- If DOMAINNAME is null, return the current default.
- If DOMAINNAME is "", reset to the default of "messages". */
- char *
--TEXTDOMAIN (domainname)
-- const char *domainname;
-+TEXTDOMAIN (const char *domainname)
- {
-- char *old;
-+ char *new_domain;
-+ char *old_domain;
-
- /* A NULL pointer requests the current setting. */
- if (domainname == NULL)
- return (char *) _nl_current_default_domain;
-
-- old = (char *) _nl_current_default_domain;
-+ __libc_rwlock_wrlock (_nl_state_lock);
-+
-+ old_domain = (char *) _nl_current_default_domain;
-
- /* If domain name is the null string set to default domain "messages". */
- if (domainname[0] == '\0'
- || strcmp (domainname, _nl_default_default_domain) == 0)
-- _nl_current_default_domain = _nl_default_default_domain;
-+ {
-+ _nl_current_default_domain = _nl_default_default_domain;
-+ new_domain = (char *) _nl_current_default_domain;
-+ }
-+ else if (strcmp (domainname, old_domain) == 0)
-+ /* This can happen and people will use it to signal that some
-+ environment variable changed. */
-+ new_domain = old_domain;
- else
- {
- /* If the following malloc fails `_nl_current_default_domain'
- will be NULL. This value will be returned and so signals we
- are out of core. */
- #if defined _LIBC || defined HAVE_STRDUP
-- _nl_current_default_domain = strdup (domainname);
-+ new_domain = strdup (domainname);
- #else
- size_t len = strlen (domainname) + 1;
-- char *cp = (char *) malloc (len);
-- if (cp != NULL)
-- memcpy (cp, domainname, len);
-- _nl_current_default_domain = cp;
-+ new_domain = (char *) malloc (len);
-+ if (new_domain != NULL)
-+ memcpy (new_domain, domainname, len);
- #endif
-+
-+ if (new_domain != NULL)
-+ _nl_current_default_domain = new_domain;
- }
-
-- if (old != _nl_default_default_domain)
-- free (old);
-+ /* We use this possibility to signal a change of the loaded catalogs
-+ since this is most likely the case and there is no other easy we
-+ to do it. Do it only when the call was successful. */
-+ if (new_domain != NULL)
-+ {
-+ ++_nl_msg_cat_cntr;
-
-- return (char *) _nl_current_default_domain;
-+ if (old_domain != new_domain && old_domain != _nl_default_default_domain)
-+ free (old_domain);
-+ }
-+
-+ __libc_rwlock_unlock (_nl_state_lock);
-+
-+ return new_domain;
- }
-
- #ifdef _LIBC
---- lrzsz-0.12.20.safe/intl/vasnprintf.c 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/vasnprintf.c 2004-09-12 14:40:34.662701424 -0400
-@@ -0,0 +1,887 @@
-+/* vsprintf with automatic memory allocation.
-+ Copyright (C) 1999, 2002-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+/* Tell glibc's <stdio.h> to provide a prototype for snprintf().
-+ This must come before <config.h> because <config.h> may include
-+ <features.h>, and once <features.h> has been included, it's too late. */
-+#ifndef _GNU_SOURCE
-+# define _GNU_SOURCE 1
-+#endif
-+
-+#ifdef HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+#ifndef IN_LIBINTL
-+# include <alloca.h>
-+#endif
-+
-+/* Specification. */
-+#if WIDE_CHAR_VERSION
-+# include "vasnwprintf.h"
-+#else
-+# include "vasnprintf.h"
-+#endif
-+
-+#include <stdio.h> /* snprintf(), sprintf() */
-+#include <stdlib.h> /* abort(), malloc(), realloc(), free() */
-+#include <string.h> /* memcpy(), strlen() */
-+#include <errno.h> /* errno */
-+#include <limits.h> /* CHAR_BIT */
-+#include <float.h> /* DBL_MAX_EXP, LDBL_MAX_EXP */
-+#if WIDE_CHAR_VERSION
-+# include "wprintf-parse.h"
-+#else
-+# include "printf-parse.h"
-+#endif
-+
-+/* Checked size_t computations. */
-+#include "xsize.h"
-+
-+#ifdef HAVE_WCHAR_T
-+# ifdef HAVE_WCSLEN
-+# define local_wcslen wcslen
-+# else
-+ /* Solaris 2.5.1 has wcslen() in a separate library libw.so. To avoid
-+ a dependency towards this library, here is a local substitute.
-+ Define this substitute only once, even if this file is included
-+ twice in the same compilation unit. */
-+# ifndef local_wcslen_defined
-+# define local_wcslen_defined 1
-+static size_t
-+local_wcslen (const wchar_t *s)
-+{
-+ const wchar_t *ptr;
-+
-+ for (ptr = s; *ptr != (wchar_t) 0; ptr++)
-+ ;
-+ return ptr - s;
-+}
-+# endif
-+# endif
-+#endif
-+
-+#if WIDE_CHAR_VERSION
-+# define VASNPRINTF vasnwprintf
-+# define CHAR_T wchar_t
-+# define DIRECTIVE wchar_t_directive
-+# define DIRECTIVES wchar_t_directives
-+# define PRINTF_PARSE wprintf_parse
-+# define USE_SNPRINTF 1
-+# if HAVE_DECL__SNWPRINTF
-+ /* On Windows, the function swprintf() has a different signature than
-+ on Unix; we use the _snwprintf() function instead. */
-+# define SNPRINTF _snwprintf
-+# else
-+ /* Unix. */
-+# define SNPRINTF swprintf
-+# endif
-+#else
-+# define VASNPRINTF vasnprintf
-+# define CHAR_T char
-+# define DIRECTIVE char_directive
-+# define DIRECTIVES char_directives
-+# define PRINTF_PARSE printf_parse
-+# define USE_SNPRINTF (HAVE_DECL__SNPRINTF || HAVE_SNPRINTF)
-+# if HAVE_DECL__SNPRINTF
-+ /* Windows. */
-+# define SNPRINTF _snprintf
-+# else
-+ /* Unix. */
-+# define SNPRINTF snprintf
-+# endif
-+#endif
-+
-+CHAR_T *
-+VASNPRINTF (CHAR_T *resultbuf, size_t *lengthp, const CHAR_T *format, va_list args)
-+{
-+ DIRECTIVES d;
-+ arguments a;
-+
-+ if (PRINTF_PARSE (format, &d, &a) < 0)
-+ {
-+ errno = EINVAL;
-+ return NULL;
-+ }
-+
-+#define CLEANUP() \
-+ free (d.dir); \
-+ if (a.arg) \
-+ free (a.arg);
-+
-+ if (printf_fetchargs (args, &a) < 0)
-+ {
-+ CLEANUP ();
-+ errno = EINVAL;
-+ return NULL;
-+ }
-+
-+ {
-+ size_t buf_neededlength;
-+ CHAR_T *buf;
-+ CHAR_T *buf_malloced;
-+ const CHAR_T *cp;
-+ size_t i;
-+ DIRECTIVE *dp;
-+ /* Output string accumulator. */
-+ CHAR_T *result;
-+ size_t allocated;
-+ size_t length;
-+
-+ /* Allocate a small buffer that will hold a directive passed to
-+ sprintf or snprintf. */
-+ buf_neededlength =
-+ xsum4 (7, d.max_width_length, d.max_precision_length, 6);
-+#if HAVE_ALLOCA
-+ if (buf_neededlength < 4000 / sizeof (CHAR_T))
-+ {
-+ buf = (CHAR_T *) alloca (buf_neededlength * sizeof (CHAR_T));
-+ buf_malloced = NULL;
-+ }
-+ else
-+#endif
-+ {
-+ size_t buf_memsize = xtimes (buf_neededlength, sizeof (CHAR_T));
-+ if (size_overflow_p (buf_memsize))
-+ goto out_of_memory_1;
-+ buf = (CHAR_T *) malloc (buf_memsize);
-+ if (buf == NULL)
-+ goto out_of_memory_1;
-+ buf_malloced = buf;
-+ }
-+
-+ if (resultbuf != NULL)
-+ {
-+ result = resultbuf;
-+ allocated = *lengthp;
-+ }
-+ else
-+ {
-+ result = NULL;
-+ allocated = 0;
-+ }
-+ length = 0;
-+ /* Invariants:
-+ result is either == resultbuf or == NULL or malloc-allocated.
-+ If length > 0, then result != NULL. */
-+
-+ /* Ensures that allocated >= needed. Aborts through a jump to
-+ out_of_memory if needed is SIZE_MAX or otherwise too big. */
-+#define ENSURE_ALLOCATION(needed) \
-+ if ((needed) > allocated) \
-+ { \
-+ size_t memory_size; \
-+ CHAR_T *memory; \
-+ \
-+ allocated = (allocated > 0 ? xtimes (allocated, 2) : 12); \
-+ if ((needed) > allocated) \
-+ allocated = (needed); \
-+ memory_size = xtimes (allocated, sizeof (CHAR_T)); \
-+ if (size_overflow_p (memory_size)) \
-+ goto out_of_memory; \
-+ if (result == resultbuf || result == NULL) \
-+ memory = (CHAR_T *) malloc (memory_size); \
-+ else \
-+ memory = (CHAR_T *) realloc (result, memory_size); \
-+ if (memory == NULL) \
-+ goto out_of_memory; \
-+ if (result == resultbuf && length > 0) \
-+ memcpy (memory, result, length * sizeof (CHAR_T)); \
-+ result = memory; \
-+ }
-+
-+ for (cp = format, i = 0, dp = &d.dir[0]; ; cp = dp->dir_end, i++, dp++)
-+ {
-+ if (cp != dp->dir_start)
-+ {
-+ size_t n = dp->dir_start - cp;
-+ size_t augmented_length = xsum (length, n);
-+
-+ ENSURE_ALLOCATION (augmented_length);
-+ memcpy (result + length, cp, n * sizeof (CHAR_T));
-+ length = augmented_length;
-+ }
-+ if (i == d.count)
-+ break;
-+
-+ /* Execute a single directive. */
-+ if (dp->conversion == '%')
-+ {
-+ size_t augmented_length;
-+
-+ if (!(dp->arg_index == ARG_NONE))
-+ abort ();
-+ augmented_length = xsum (length, 1);
-+ ENSURE_ALLOCATION (augmented_length);
-+ result[length] = '%';
-+ length = augmented_length;
-+ }
-+ else
-+ {
-+ if (!(dp->arg_index != ARG_NONE))
-+ abort ();
-+
-+ if (dp->conversion == 'n')
-+ {
-+ switch (a.arg[dp->arg_index].type)
-+ {
-+ case TYPE_COUNT_SCHAR_POINTER:
-+ *a.arg[dp->arg_index].a.a_count_schar_pointer = length;
-+ break;
-+ case TYPE_COUNT_SHORT_POINTER:
-+ *a.arg[dp->arg_index].a.a_count_short_pointer = length;
-+ break;
-+ case TYPE_COUNT_INT_POINTER:
-+ *a.arg[dp->arg_index].a.a_count_int_pointer = length;
-+ break;
-+ case TYPE_COUNT_LONGINT_POINTER:
-+ *a.arg[dp->arg_index].a.a_count_longint_pointer = length;
-+ break;
-+#ifdef HAVE_LONG_LONG
-+ case TYPE_COUNT_LONGLONGINT_POINTER:
-+ *a.arg[dp->arg_index].a.a_count_longlongint_pointer = length;
-+ break;
-+#endif
-+ default:
-+ abort ();
-+ }
-+ }
-+ else
-+ {
-+ arg_type type = a.arg[dp->arg_index].type;
-+ CHAR_T *p;
-+ unsigned int prefix_count;
-+ int prefixes[2];
-+#if !USE_SNPRINTF
-+ size_t tmp_length;
-+ CHAR_T tmpbuf[700];
-+ CHAR_T *tmp;
-+
-+ /* Allocate a temporary buffer of sufficient size for calling
-+ sprintf. */
-+ {
-+ size_t width;
-+ size_t precision;
-+
-+ width = 0;
-+ if (dp->width_start != dp->width_end)
-+ {
-+ if (dp->width_arg_index != ARG_NONE)
-+ {
-+ int arg;
-+
-+ if (!(a.arg[dp->width_arg_index].type == TYPE_INT))
-+ abort ();
-+ arg = a.arg[dp->width_arg_index].a.a_int;
-+ width = (arg < 0 ? (unsigned int) (-arg) : arg);
-+ }
-+ else
-+ {
-+ const CHAR_T *digitp = dp->width_start;
-+
-+ do
-+ width = xsum (xtimes (width, 10), *digitp++ - '0');
-+ while (digitp != dp->width_end);
-+ }
-+ }
-+
-+ precision = 6;
-+ if (dp->precision_start != dp->precision_end)
-+ {
-+ if (dp->precision_arg_index != ARG_NONE)
-+ {
-+ int arg;
-+
-+ if (!(a.arg[dp->precision_arg_index].type == TYPE_INT))
-+ abort ();
-+ arg = a.arg[dp->precision_arg_index].a.a_int;
-+ precision = (arg < 0 ? 0 : arg);
-+ }
-+ else
-+ {
-+ const CHAR_T *digitp = dp->precision_start + 1;
-+
-+ precision = 0;
-+ do
-+ precision = xsum (xtimes (precision, 10), *digitp++ - '0');
-+ while (digitp != dp->precision_end);
-+ }
-+ }
-+
-+ switch (dp->conversion)
-+ {
-+
-+ case 'd': case 'i': case 'u':
-+# ifdef HAVE_LONG_LONG
-+ if (type == TYPE_LONGLONGINT || type == TYPE_ULONGLONGINT)
-+ tmp_length =
-+ (unsigned int) (sizeof (unsigned long long) * CHAR_BIT
-+ * 0.30103 /* binary -> decimal */
-+ * 2 /* estimate for FLAG_GROUP */
-+ )
-+ + 1 /* turn floor into ceil */
-+ + 1; /* account for leading sign */
-+ else
-+# endif
-+ if (type == TYPE_LONGINT || type == TYPE_ULONGINT)
-+ tmp_length =
-+ (unsigned int) (sizeof (unsigned long) * CHAR_BIT
-+ * 0.30103 /* binary -> decimal */
-+ * 2 /* estimate for FLAG_GROUP */
-+ )
-+ + 1 /* turn floor into ceil */
-+ + 1; /* account for leading sign */
-+ else
-+ tmp_length =
-+ (unsigned int) (sizeof (unsigned int) * CHAR_BIT
-+ * 0.30103 /* binary -> decimal */
-+ * 2 /* estimate for FLAG_GROUP */
-+ )
-+ + 1 /* turn floor into ceil */
-+ + 1; /* account for leading sign */
-+ break;
-+
-+ case 'o':
-+# ifdef HAVE_LONG_LONG
-+ if (type == TYPE_LONGLONGINT || type == TYPE_ULONGLONGINT)
-+ tmp_length =
-+ (unsigned int) (sizeof (unsigned long long) * CHAR_BIT
-+ * 0.333334 /* binary -> octal */
-+ )
-+ + 1 /* turn floor into ceil */
-+ + 1; /* account for leading sign */
-+ else
-+# endif
-+ if (type == TYPE_LONGINT || type == TYPE_ULONGINT)
-+ tmp_length =
-+ (unsigned int) (sizeof (unsigned long) * CHAR_BIT
-+ * 0.333334 /* binary -> octal */
-+ )
-+ + 1 /* turn floor into ceil */
-+ + 1; /* account for leading sign */
-+ else
-+ tmp_length =
-+ (unsigned int) (sizeof (unsigned int) * CHAR_BIT
-+ * 0.333334 /* binary -> octal */
-+ )
-+ + 1 /* turn floor into ceil */
-+ + 1; /* account for leading sign */
-+ break;
-+
-+ case 'x': case 'X':
-+# ifdef HAVE_LONG_LONG
-+ if (type == TYPE_LONGLONGINT || type == TYPE_ULONGLONGINT)
-+ tmp_length =
-+ (unsigned int) (sizeof (unsigned long long) * CHAR_BIT
-+ * 0.25 /* binary -> hexadecimal */
-+ )
-+ + 1 /* turn floor into ceil */
-+ + 2; /* account for leading sign or alternate form */
-+ else
-+# endif
-+ if (type == TYPE_LONGINT || type == TYPE_ULONGINT)
-+ tmp_length =
-+ (unsigned int) (sizeof (unsigned long) * CHAR_BIT
-+ * 0.25 /* binary -> hexadecimal */
-+ )
-+ + 1 /* turn floor into ceil */
-+ + 2; /* account for leading sign or alternate form */
-+ else
-+ tmp_length =
-+ (unsigned int) (sizeof (unsigned int) * CHAR_BIT
-+ * 0.25 /* binary -> hexadecimal */
-+ )
-+ + 1 /* turn floor into ceil */
-+ + 2; /* account for leading sign or alternate form */
-+ break;
-+
-+ case 'f': case 'F':
-+# ifdef HAVE_LONG_DOUBLE
-+ if (type == TYPE_LONGDOUBLE)
-+ tmp_length =
-+ (unsigned int) (LDBL_MAX_EXP
-+ * 0.30103 /* binary -> decimal */
-+ * 2 /* estimate for FLAG_GROUP */
-+ )
-+ + 1 /* turn floor into ceil */
-+ + 10; /* sign, decimal point etc. */
-+ else
-+# endif
-+ tmp_length =
-+ (unsigned int) (DBL_MAX_EXP
-+ * 0.30103 /* binary -> decimal */
-+ * 2 /* estimate for FLAG_GROUP */
-+ )
-+ + 1 /* turn floor into ceil */
-+ + 10; /* sign, decimal point etc. */
-+ tmp_length = xsum (tmp_length, precision);
-+ break;
-+
-+ case 'e': case 'E': case 'g': case 'G':
-+ case 'a': case 'A':
-+ tmp_length =
-+ 12; /* sign, decimal point, exponent etc. */
-+ tmp_length = xsum (tmp_length, precision);
-+ break;
-+
-+ case 'c':
-+# if defined HAVE_WINT_T && !WIDE_CHAR_VERSION
-+ if (type == TYPE_WIDE_CHAR)
-+ tmp_length = MB_CUR_MAX;
-+ else
-+# endif
-+ tmp_length = 1;
-+ break;
-+
-+ case 's':
-+# ifdef HAVE_WCHAR_T
-+ if (type == TYPE_WIDE_STRING)
-+ {
-+ tmp_length =
-+ local_wcslen (a.arg[dp->arg_index].a.a_wide_string);
-+
-+# if !WIDE_CHAR_VERSION
-+ tmp_length = xtimes (tmp_length, MB_CUR_MAX);
-+# endif
-+ }
-+ else
-+# endif
-+ tmp_length = strlen (a.arg[dp->arg_index].a.a_string);
-+ break;
-+
-+ case 'p':
-+ tmp_length =
-+ (unsigned int) (sizeof (void *) * CHAR_BIT
-+ * 0.25 /* binary -> hexadecimal */
-+ )
-+ + 1 /* turn floor into ceil */
-+ + 2; /* account for leading 0x */
-+ break;
-+
-+ default:
-+ abort ();
-+ }
-+
-+ if (tmp_length < width)
-+ tmp_length = width;
-+
-+ tmp_length = xsum (tmp_length, 1); /* account for trailing NUL */
-+ }
-+
-+ if (tmp_length <= sizeof (tmpbuf) / sizeof (CHAR_T))
-+ tmp = tmpbuf;
-+ else
-+ {
-+ size_t tmp_memsize = xtimes (tmp_length, sizeof (CHAR_T));
-+
-+ if (size_overflow_p (tmp_memsize))
-+ /* Overflow, would lead to out of memory. */
-+ goto out_of_memory;
-+ tmp = (CHAR_T *) malloc (tmp_memsize);
-+ if (tmp == NULL)
-+ /* Out of memory. */
-+ goto out_of_memory;
-+ }
-+#endif
-+
-+ /* Construct the format string for calling snprintf or
-+ sprintf. */
-+ p = buf;
-+ *p++ = '%';
-+ if (dp->flags & FLAG_GROUP)
-+ *p++ = '\'';
-+ if (dp->flags & FLAG_LEFT)
-+ *p++ = '-';
-+ if (dp->flags & FLAG_SHOWSIGN)
-+ *p++ = '+';
-+ if (dp->flags & FLAG_SPACE)
-+ *p++ = ' ';
-+ if (dp->flags & FLAG_ALT)
-+ *p++ = '#';
-+ if (dp->flags & FLAG_ZERO)
-+ *p++ = '0';
-+ if (dp->width_start != dp->width_end)
-+ {
-+ size_t n = dp->width_end - dp->width_start;
-+ memcpy (p, dp->width_start, n * sizeof (CHAR_T));
-+ p += n;
-+ }
-+ if (dp->precision_start != dp->precision_end)
-+ {
-+ size_t n = dp->precision_end - dp->precision_start;
-+ memcpy (p, dp->precision_start, n * sizeof (CHAR_T));
-+ p += n;
-+ }
-+
-+ switch (type)
-+ {
-+#ifdef HAVE_LONG_LONG
-+ case TYPE_LONGLONGINT:
-+ case TYPE_ULONGLONGINT:
-+ *p++ = 'l';
-+ /*FALLTHROUGH*/
-+#endif
-+ case TYPE_LONGINT:
-+ case TYPE_ULONGINT:
-+#ifdef HAVE_WINT_T
-+ case TYPE_WIDE_CHAR:
-+#endif
-+#ifdef HAVE_WCHAR_T
-+ case TYPE_WIDE_STRING:
-+#endif
-+ *p++ = 'l';
-+ break;
-+#ifdef HAVE_LONG_DOUBLE
-+ case TYPE_LONGDOUBLE:
-+ *p++ = 'L';
-+ break;
-+#endif
-+ default:
-+ break;
-+ }
-+ *p = dp->conversion;
-+#if USE_SNPRINTF
-+ p[1] = '%';
-+ p[2] = 'n';
-+ p[3] = '\0';
-+#else
-+ p[1] = '\0';
-+#endif
-+
-+ /* Construct the arguments for calling snprintf or sprintf. */
-+ prefix_count = 0;
-+ if (dp->width_arg_index != ARG_NONE)
-+ {
-+ if (!(a.arg[dp->width_arg_index].type == TYPE_INT))
-+ abort ();
-+ prefixes[prefix_count++] = a.arg[dp->width_arg_index].a.a_int;
-+ }
-+ if (dp->precision_arg_index != ARG_NONE)
-+ {
-+ if (!(a.arg[dp->precision_arg_index].type == TYPE_INT))
-+ abort ();
-+ prefixes[prefix_count++] = a.arg[dp->precision_arg_index].a.a_int;
-+ }
-+
-+#if USE_SNPRINTF
-+ /* Prepare checking whether snprintf returns the count
-+ via %n. */
-+ ENSURE_ALLOCATION (xsum (length, 1));
-+ result[length] = '\0';
-+#endif
-+
-+ for (;;)
-+ {
-+ size_t maxlen;
-+ int count;
-+ int retcount;
-+
-+ maxlen = allocated - length;
-+ count = -1;
-+ retcount = 0;
-+
-+#if USE_SNPRINTF
-+# define SNPRINTF_BUF(arg) \
-+ switch (prefix_count) \
-+ { \
-+ case 0: \
-+ retcount = SNPRINTF (result + length, maxlen, buf, \
-+ arg, &count); \
-+ break; \
-+ case 1: \
-+ retcount = SNPRINTF (result + length, maxlen, buf, \
-+ prefixes[0], arg, &count); \
-+ break; \
-+ case 2: \
-+ retcount = SNPRINTF (result + length, maxlen, buf, \
-+ prefixes[0], prefixes[1], arg, \
-+ &count); \
-+ break; \
-+ default: \
-+ abort (); \
-+ }
-+#else
-+# define SNPRINTF_BUF(arg) \
-+ switch (prefix_count) \
-+ { \
-+ case 0: \
-+ count = sprintf (tmp, buf, arg); \
-+ break; \
-+ case 1: \
-+ count = sprintf (tmp, buf, prefixes[0], arg); \
-+ break; \
-+ case 2: \
-+ count = sprintf (tmp, buf, prefixes[0], prefixes[1],\
-+ arg); \
-+ break; \
-+ default: \
-+ abort (); \
-+ }
-+#endif
-+
-+ switch (type)
-+ {
-+ case TYPE_SCHAR:
-+ {
-+ int arg = a.arg[dp->arg_index].a.a_schar;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+ case TYPE_UCHAR:
-+ {
-+ unsigned int arg = a.arg[dp->arg_index].a.a_uchar;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+ case TYPE_SHORT:
-+ {
-+ int arg = a.arg[dp->arg_index].a.a_short;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+ case TYPE_USHORT:
-+ {
-+ unsigned int arg = a.arg[dp->arg_index].a.a_ushort;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+ case TYPE_INT:
-+ {
-+ int arg = a.arg[dp->arg_index].a.a_int;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+ case TYPE_UINT:
-+ {
-+ unsigned int arg = a.arg[dp->arg_index].a.a_uint;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+ case TYPE_LONGINT:
-+ {
-+ long int arg = a.arg[dp->arg_index].a.a_longint;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+ case TYPE_ULONGINT:
-+ {
-+ unsigned long int arg = a.arg[dp->arg_index].a.a_ulongint;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+#ifdef HAVE_LONG_LONG
-+ case TYPE_LONGLONGINT:
-+ {
-+ long long int arg = a.arg[dp->arg_index].a.a_longlongint;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+ case TYPE_ULONGLONGINT:
-+ {
-+ unsigned long long int arg = a.arg[dp->arg_index].a.a_ulonglongint;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+#endif
-+ case TYPE_DOUBLE:
-+ {
-+ double arg = a.arg[dp->arg_index].a.a_double;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+#ifdef HAVE_LONG_DOUBLE
-+ case TYPE_LONGDOUBLE:
-+ {
-+ long double arg = a.arg[dp->arg_index].a.a_longdouble;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+#endif
-+ case TYPE_CHAR:
-+ {
-+ int arg = a.arg[dp->arg_index].a.a_char;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+#ifdef HAVE_WINT_T
-+ case TYPE_WIDE_CHAR:
-+ {
-+ wint_t arg = a.arg[dp->arg_index].a.a_wide_char;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+#endif
-+ case TYPE_STRING:
-+ {
-+ const char *arg = a.arg[dp->arg_index].a.a_string;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+#ifdef HAVE_WCHAR_T
-+ case TYPE_WIDE_STRING:
-+ {
-+ const wchar_t *arg = a.arg[dp->arg_index].a.a_wide_string;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+#endif
-+ case TYPE_POINTER:
-+ {
-+ void *arg = a.arg[dp->arg_index].a.a_pointer;
-+ SNPRINTF_BUF (arg);
-+ }
-+ break;
-+ default:
-+ abort ();
-+ }
-+
-+#if USE_SNPRINTF
-+ /* Portability: Not all implementations of snprintf()
-+ are ISO C 99 compliant. Determine the number of
-+ bytes that snprintf() has produced or would have
-+ produced. */
-+ if (count >= 0)
-+ {
-+ /* Verify that snprintf() has NUL-terminated its
-+ result. */
-+ if (count < maxlen && result[length + count] != '\0')
-+ abort ();
-+ /* Portability hack. */
-+ if (retcount > count)
-+ count = retcount;
-+ }
-+ else
-+ {
-+ /* snprintf() doesn't understand the '%n'
-+ directive. */
-+ if (p[1] != '\0')
-+ {
-+ /* Don't use the '%n' directive; instead, look
-+ at the snprintf() return value. */
-+ p[1] = '\0';
-+ continue;
-+ }
-+ else
-+ {
-+ /* Look at the snprintf() return value. */
-+ if (retcount < 0)
-+ {
-+ /* HP-UX 10.20 snprintf() is doubly deficient:
-+ It doesn't understand the '%n' directive,
-+ *and* it returns -1 (rather than the length
-+ that would have been required) when the
-+ buffer is too small. */
-+ size_t bigger_need =
-+ xsum (xtimes (allocated, 2), 12);
-+ ENSURE_ALLOCATION (bigger_need);
-+ continue;
-+ }
-+ else
-+ count = retcount;
-+ }
-+ }
-+#endif
-+
-+ /* Attempt to handle failure. */
-+ if (count < 0)
-+ {
-+ if (!(result == resultbuf || result == NULL))
-+ free (result);
-+ if (buf_malloced != NULL)
-+ free (buf_malloced);
-+ CLEANUP ();
-+ errno = EINVAL;
-+ return NULL;
-+ }
-+
-+#if !USE_SNPRINTF
-+ if (count >= tmp_length)
-+ /* tmp_length was incorrectly calculated - fix the
-+ code above! */
-+ abort ();
-+#endif
-+
-+ /* Make room for the result. */
-+ if (count >= maxlen)
-+ {
-+ /* Need at least count bytes. But allocate
-+ proportionally, to avoid looping eternally if
-+ snprintf() reports a too small count. */
-+ size_t n =
-+ xmax (xsum (length, count), xtimes (allocated, 2));
-+
-+ ENSURE_ALLOCATION (n);
-+#if USE_SNPRINTF
-+ continue;
-+#endif
-+ }
-+
-+#if USE_SNPRINTF
-+ /* The snprintf() result did fit. */
-+#else
-+ /* Append the sprintf() result. */
-+ memcpy (result + length, tmp, count * sizeof (CHAR_T));
-+ if (tmp != tmpbuf)
-+ free (tmp);
-+#endif
-+
-+ length += count;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+
-+ /* Add the final NUL. */
-+ ENSURE_ALLOCATION (xsum (length, 1));
-+ result[length] = '\0';
-+
-+ if (result != resultbuf && length + 1 < allocated)
-+ {
-+ /* Shrink the allocated memory if possible. */
-+ CHAR_T *memory;
-+
-+ memory = (CHAR_T *) realloc (result, (length + 1) * sizeof (CHAR_T));
-+ if (memory != NULL)
-+ result = memory;
-+ }
-+
-+ if (buf_malloced != NULL)
-+ free (buf_malloced);
-+ CLEANUP ();
-+ *lengthp = length;
-+ return result;
-+
-+ out_of_memory:
-+ if (!(result == resultbuf || result == NULL))
-+ free (result);
-+ if (buf_malloced != NULL)
-+ free (buf_malloced);
-+ out_of_memory_1:
-+ CLEANUP ();
-+ errno = ENOMEM;
-+ return NULL;
-+ }
-+}
-+
-+#undef SNPRINTF
-+#undef USE_SNPRINTF
-+#undef PRINTF_PARSE
-+#undef DIRECTIVES
-+#undef DIRECTIVE
-+#undef CHAR_T
-+#undef VASNPRINTF
---- lrzsz-0.12.20.safe/intl/vasnprintf.h 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/vasnprintf.h 2004-09-12 14:40:34.667700664 -0400
-@@ -0,0 +1,61 @@
-+/* vsprintf with automatic memory allocation.
-+ Copyright (C) 2002-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifndef _VASNPRINTF_H
-+#define _VASNPRINTF_H
-+
-+/* Get va_list. */
-+#include <stdarg.h>
-+
-+/* Get size_t. */
-+#include <stddef.h>
-+
-+#ifndef __attribute__
-+/* This feature is available in gcc versions 2.5 and later. */
-+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 5) || __STRICT_ANSI__
-+# define __attribute__(Spec) /* empty */
-+# endif
-+/* The __-protected variants of `format' and `printf' attributes
-+ are accepted by gcc versions 2.6.4 (effectively 2.7) and later. */
-+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 7)
-+# define __format__ format
-+# define __printf__ printf
-+# endif
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/* Write formatted output to a string dynamically allocated with malloc().
-+ You can pass a preallocated buffer for the result in RESULTBUF and its
-+ size in *LENGTHP; otherwise you pass RESULTBUF = NULL.
-+ If successful, return the address of the string (this may be = RESULTBUF
-+ if no dynamic memory allocation was necessary) and set *LENGTHP to the
-+ number of resulting bytes, excluding the trailing NUL. Upon error, set
-+ errno and return NULL. */
-+extern char * asnprintf (char *resultbuf, size_t *lengthp, const char *format, ...)
-+ __attribute__ ((__format__ (__printf__, 3, 4)));
-+extern char * vasnprintf (char *resultbuf, size_t *lengthp, const char *format, va_list args)
-+ __attribute__ ((__format__ (__printf__, 3, 0)));
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* _VASNPRINTF_H */
---- lrzsz-0.12.20.safe/intl/vasnwprintf.h 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/vasnwprintf.h 2004-09-12 14:40:34.673699752 -0400
-@@ -0,0 +1,46 @@
-+/* vswprintf with automatic memory allocation.
-+ Copyright (C) 2002-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifndef _VASNWPRINTF_H
-+#define _VASNWPRINTF_H
-+
-+/* Get va_list. */
-+#include <stdarg.h>
-+
-+/* Get wchar_t, size_t. */
-+#include <stddef.h>
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/* Write formatted output to a string dynamically allocated with malloc().
-+ You can pass a preallocated buffer for the result in RESULTBUF and its
-+ size in *LENGTHP; otherwise you pass RESULTBUF = NULL.
-+ If successful, return the address of the string (this may be = RESULTBUF
-+ if no dynamic memory allocation was necessary) and set *LENGTHP to the
-+ number of resulting bytes, excluding the trailing NUL. Upon error, set
-+ errno and return NULL. */
-+extern wchar_t * asnwprintf (wchar_t *resultbuf, size_t *lengthp, const wchar_t *format, ...);
-+extern wchar_t * vasnwprintf (wchar_t *resultbuf, size_t *lengthp, const wchar_t *format, va_list args);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* _VASNWPRINTF_H */
---- lrzsz-0.12.20.safe/intl/VERSION 1998-04-26 09:22:37.000000000 -0400
-+++ lrzsz-0.12.20/intl/VERSION 2004-09-12 14:40:34.679698840 -0400
-@@ -1 +1 @@
--GNU gettext library from gettext-0.10.32
-+GNU gettext library from gettext-0.14.1
---- lrzsz-0.12.20.safe/intl/wprintf-parse.h 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/wprintf-parse.h 2004-09-12 14:40:34.695696408 -0400
-@@ -0,0 +1,75 @@
-+/* Parse printf format string.
-+ Copyright (C) 1999, 2002-2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifndef _WPRINTF_PARSE_H
-+#define _WPRINTF_PARSE_H
-+
-+#include "printf-args.h"
-+
-+
-+/* Flags */
-+#define FLAG_GROUP 1 /* ' flag */
-+#define FLAG_LEFT 2 /* - flag */
-+#define FLAG_SHOWSIGN 4 /* + flag */
-+#define FLAG_SPACE 8 /* space flag */
-+#define FLAG_ALT 16 /* # flag */
-+#define FLAG_ZERO 32
-+
-+/* arg_index value indicating that no argument is consumed. */
-+#define ARG_NONE (~(size_t)0)
-+
-+/* A parsed directive. */
-+typedef struct
-+{
-+ const wchar_t* dir_start;
-+ const wchar_t* dir_end;
-+ int flags;
-+ const wchar_t* width_start;
-+ const wchar_t* width_end;
-+ size_t width_arg_index;
-+ const wchar_t* precision_start;
-+ const wchar_t* precision_end;
-+ size_t precision_arg_index;
-+ wchar_t conversion; /* d i o u x X f e E g G c s p n U % but not C S */
-+ size_t arg_index;
-+}
-+wchar_t_directive;
-+
-+/* A parsed format string. */
-+typedef struct
-+{
-+ size_t count;
-+ wchar_t_directive *dir;
-+ size_t max_width_length;
-+ size_t max_precision_length;
-+}
-+wchar_t_directives;
-+
-+
-+/* Parses the format string. Fills in the number N of directives, and fills
-+ in directives[0], ..., directives[N-1], and sets directives[N].dir_start
-+ to the end of the format string. Also fills in the arg_type fields of the
-+ arguments and the needed count of arguments. */
-+#ifdef STATIC
-+STATIC
-+#else
-+extern
-+#endif
-+int wprintf_parse (const wchar_t *format, wchar_t_directives *d, arguments *a);
-+
-+#endif /* _WPRINTF_PARSE_H */
---- lrzsz-0.12.20.safe/intl/xopen-msg.sed 1998-04-26 09:20:52.000000000 -0400
-+++ lrzsz-0.12.20/intl/xopen-msg.sed 1969-12-31 19:00:00.000000000 -0500
-@@ -1,104 +0,0 @@
--# po2msg.sed - Convert Uniforum style .po file to X/Open style .msg file
--# Copyright (C) 1995 Free Software Foundation, Inc.
--# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
--#
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--#
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--#
--#
--# The first directive in the .msg should be the definition of the
--# message set number. We use always set number 1.
--#
--1 {
-- i\
--$set 1 # Automatically created by po2msg.sed
-- h
-- s/.*/0/
-- x
--}
--#
--# We copy all comments into the .msg file. Perhaps they can help.
--#
--/^#/ s/^#[ ]*/$ /p
--#
--# We copy the original message as a comment into the .msg file.
--#
--/^msgid/ {
--# Does not work now
--# /"$/! {
--# s/\\$//
--# s/$/ ... (more lines following)"/
--# }
-- s/^msgid[ ]*"\(.*\)"$/$ Original Message: \1/
-- p
--}
--#
--# The .msg file contains, other then the .po file, only the translations
--# but each given a unique ID. Starting from 1 and incrementing by 1 for
--# each message we assign them to the messages.
--# It is important that the .po file used to generate the cat-id-tbl.c file
--# (with po-to-tbl) is the same as the one used here. (At least the order
--# of declarations must not be changed.)
--#
--/^msgstr/ {
-- s/msgstr[ ]*"\(.*\)"/\1/
-- x
--# The following nice solution is by
--# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
-- td
--# Increment a decimal number in pattern space.
--# First hide trailing `9' digits.
-- :d
-- s/9\(_*\)$/_\1/
-- td
--# Assure at least one digit is available.
-- s/^\(_*\)$/0\1/
--# Increment the last digit.
-- s/8\(_*\)$/9\1/
-- s/7\(_*\)$/8\1/
-- s/6\(_*\)$/7\1/
-- s/5\(_*\)$/6\1/
-- s/4\(_*\)$/5\1/
-- s/3\(_*\)$/4\1/
-- s/2\(_*\)$/3\1/
-- s/1\(_*\)$/2\1/
-- s/0\(_*\)$/1\1/
--# Convert the hidden `9' digits to `0's.
-- s/_/0/g
-- x
--# Bring the line in the format `<number> <message>'
-- G
-- s/^[^\n]*$/& /
-- s/\(.*\)\n\([0-9]*\)/\2 \1/
--# Clear flag from last substitution.
-- tb
--# Append the next line.
-- :b
-- N
--# Look whether second part is a continuation line.
-- s/\(.*\n\)"\(.*\)"/\1\2/
--# Yes, then branch.
-- ta
-- P
-- D
--# Note that `D' includes a jump to the start!!
--# We found a continuation line. But before printing insert '\'.
-- :a
-- s/\(.*\)\(\n.*\)/\1\\\2/
-- P
--# We cannot use the sed command `D' here
-- s/.*\n\(.*\)/\1/
-- tb
--}
--d
---- lrzsz-0.12.20.safe/intl/xsize.h 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/intl/xsize.h 2004-09-12 14:40:34.700695648 -0400
-@@ -0,0 +1,109 @@
-+/* xsize.h -- Checked size_t computations.
-+
-+ Copyright (C) 2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifndef _XSIZE_H
-+#define _XSIZE_H
-+
-+/* Get size_t. */
-+#include <stddef.h>
-+
-+/* Get SIZE_MAX. */
-+#include <limits.h>
-+#if HAVE_STDINT_H
-+# include <stdint.h>
-+#endif
-+
-+/* The size of memory objects is often computed through expressions of
-+ type size_t. Example:
-+ void* p = malloc (header_size + n * element_size).
-+ These computations can lead to overflow. When this happens, malloc()
-+ returns a piece of memory that is way too small, and the program then
-+ crashes while attempting to fill the memory.
-+ To avoid this, the functions and macros in this file check for overflow.
-+ The convention is that SIZE_MAX represents overflow.
-+ malloc (SIZE_MAX) is not guaranteed to fail -- think of a malloc
-+ implementation that uses mmap --, it's recommended to use size_overflow_p()
-+ or size_in_bounds_p() before invoking malloc().
-+ The example thus becomes:
-+ size_t size = xsum (header_size, xtimes (n, element_size));
-+ void *p = (size_in_bounds_p (size) ? malloc (size) : NULL);
-+*/
-+
-+/* Convert an arbitrary value >= 0 to type size_t. */
-+#define xcast_size_t(N) \
-+ ((N) <= SIZE_MAX ? (size_t) (N) : SIZE_MAX)
-+
-+/* Sum of two sizes, with overflow check. */
-+static inline size_t
-+#if __GNUC__ >= 3
-+__attribute__ ((__pure__))
-+#endif
-+xsum (size_t size1, size_t size2)
-+{
-+ size_t sum = size1 + size2;
-+ return (sum >= size1 ? sum : SIZE_MAX);
-+}
-+
-+/* Sum of three sizes, with overflow check. */
-+static inline size_t
-+#if __GNUC__ >= 3
-+__attribute__ ((__pure__))
-+#endif
-+xsum3 (size_t size1, size_t size2, size_t size3)
-+{
-+ return xsum (xsum (size1, size2), size3);
-+}
-+
-+/* Sum of four sizes, with overflow check. */
-+static inline size_t
-+#if __GNUC__ >= 3
-+__attribute__ ((__pure__))
-+#endif
-+xsum4 (size_t size1, size_t size2, size_t size3, size_t size4)
-+{
-+ return xsum (xsum (xsum (size1, size2), size3), size4);
-+}
-+
-+/* Maximum of two sizes, with overflow check. */
-+static inline size_t
-+#if __GNUC__ >= 3
-+__attribute__ ((__pure__))
-+#endif
-+xmax (size_t size1, size_t size2)
-+{
-+ /* No explicit check is needed here, because for any n:
-+ max (SIZE_MAX, n) == SIZE_MAX and max (n, SIZE_MAX) == SIZE_MAX. */
-+ return (size1 >= size2 ? size1 : size2);
-+}
-+
-+/* Multiplication of a count with an element size, with overflow check.
-+ The count must be >= 0 and the element size must be > 0.
-+ This is a macro, not an inline function, so that it works correctly even
-+ when N is of a wider tupe and N > SIZE_MAX. */
-+#define xtimes(N, ELSIZE) \
-+ ((N) <= SIZE_MAX / (ELSIZE) ? (size_t) (N) * (ELSIZE) : SIZE_MAX)
-+
-+/* Check for overflow. */
-+#define size_overflow_p(SIZE) \
-+ ((SIZE) == SIZE_MAX)
-+/* Check against overflow. */
-+#define size_in_bounds_p(SIZE) \
-+ ((SIZE) != SIZE_MAX)
-+
-+#endif /* _XSIZE_H */
---- lrzsz-0.12.20.safe/m4/ChangeLog 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/ChangeLog 2004-09-12 14:40:35.054641840 -0400
-@@ -0,0 +1,32 @@
-+2004-09-12 gettextize <bug-gnu-gettext@gnu.org>
-+
-+ * codeset.m4: New file, from gettext-0.14.1.
-+ * gettext.m4: New file, from gettext-0.14.1.
-+ * glibc21.m4: New file, from gettext-0.14.1.
-+ * iconv.m4: New file, from gettext-0.14.1.
-+ * intdiv0.m4: New file, from gettext-0.14.1.
-+ * intmax.m4: New file, from gettext-0.14.1.
-+ * inttypes.m4: New file, from gettext-0.14.1.
-+ * inttypes_h.m4: New file, from gettext-0.14.1.
-+ * inttypes-pri.m4: New file, from gettext-0.14.1.
-+ * isc-posix.m4: New file, from gettext-0.14.1.
-+ * lcmessage.m4: New file, from gettext-0.14.1.
-+ * lib-ld.m4: New file, from gettext-0.14.1.
-+ * lib-link.m4: New file, from gettext-0.14.1.
-+ * lib-prefix.m4: New file, from gettext-0.14.1.
-+ * longdouble.m4: New file, from gettext-0.14.1.
-+ * longlong.m4: New file, from gettext-0.14.1.
-+ * nls.m4: New file, from gettext-0.14.1.
-+ * po.m4: New file, from gettext-0.14.1.
-+ * printf-posix.m4: New file, from gettext-0.14.1.
-+ * progtest.m4: New file, from gettext-0.14.1.
-+ * signed.m4: New file, from gettext-0.14.1.
-+ * size_max.m4: New file, from gettext-0.14.1.
-+ * stdint_h.m4: New file, from gettext-0.14.1.
-+ * uintmax_t.m4: New file, from gettext-0.14.1.
-+ * ulonglong.m4: New file, from gettext-0.14.1.
-+ * wchar_t.m4: New file, from gettext-0.14.1.
-+ * wint_t.m4: New file, from gettext-0.14.1.
-+ * xsize.m4: New file, from gettext-0.14.1.
-+ * Makefile.am: New file.
-+
---- lrzsz-0.12.20.safe/m4/codeset.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/codeset.m4 2004-09-12 14:40:34.820677408 -0400
-@@ -0,0 +1,23 @@
-+# codeset.m4 serial AM1 (gettext-0.10.40)
-+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Bruno Haible.
-+
-+AC_DEFUN([AM_LANGINFO_CODESET],
-+[
-+ AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset,
-+ [AC_TRY_LINK([#include <langinfo.h>],
-+ [char* cs = nl_langinfo(CODESET);],
-+ am_cv_langinfo_codeset=yes,
-+ am_cv_langinfo_codeset=no)
-+ ])
-+ if test $am_cv_langinfo_codeset = yes; then
-+ AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
-+ [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/gettext.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/gettext.m4 2004-09-12 14:40:34.826676496 -0400
-@@ -0,0 +1,487 @@
-+# gettext.m4 serial 28 (gettext-0.13)
-+dnl Copyright (C) 1995-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+dnl
-+dnl This file can can be used in projects which are not available under
-+dnl the GNU General Public License or the GNU Library General Public
-+dnl License but which still want to provide support for the GNU gettext
-+dnl functionality.
-+dnl Please note that the actual code of the GNU gettext library is covered
-+dnl by the GNU Library General Public License, and the rest of the GNU
-+dnl gettext package package is covered by the GNU General Public License.
-+dnl They are *not* in the public domain.
-+
-+dnl Authors:
-+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-+
-+dnl Macro to add for using GNU gettext.
-+
-+dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
-+dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
-+dnl default (if it is not specified or empty) is 'no-libtool'.
-+dnl INTLSYMBOL should be 'external' for packages with no intl directory,
-+dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory.
-+dnl If INTLSYMBOL is 'use-libtool', then a libtool library
-+dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
-+dnl depending on --{enable,disable}-{shared,static} and on the presence of
-+dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
-+dnl $(top_builddir)/intl/libintl.a will be created.
-+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
-+dnl implementations (in libc or libintl) without the ngettext() function
-+dnl will be ignored. If NEEDSYMBOL is specified and is
-+dnl 'need-formatstring-macros', then GNU gettext implementations that don't
-+dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
-+dnl INTLDIR is used to find the intl libraries. If empty,
-+dnl the value `$(top_builddir)/intl/' is used.
-+dnl
-+dnl The result of the configuration is one of three cases:
-+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
-+dnl and used.
-+dnl Catalog format: GNU --> install in $(datadir)
-+dnl Catalog extension: .mo after installation, .gmo in source tree
-+dnl 2) GNU gettext has been found in the system's C library.
-+dnl Catalog format: GNU --> install in $(datadir)
-+dnl Catalog extension: .mo after installation, .gmo in source tree
-+dnl 3) No internationalization, always use English msgid.
-+dnl Catalog format: none
-+dnl Catalog extension: none
-+dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
-+dnl The use of .gmo is historical (it was needed to avoid overwriting the
-+dnl GNU format catalogs when building on a platform with an X/Open gettext),
-+dnl but we keep it in order not to force irrelevant filename changes on the
-+dnl maintainers.
-+dnl
-+AC_DEFUN([AM_GNU_GETTEXT],
-+[
-+ dnl Argument checking.
-+ ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
-+ [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
-+])])])])])
-+ ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
-+ [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
-+])])])])
-+ define(gt_included_intl, ifelse([$1], [external], [no], [yes]))
-+ define(gt_libtool_suffix_prefix, ifelse([$1], [use-libtool], [l], []))
-+
-+ AC_REQUIRE([AM_PO_SUBDIRS])dnl
-+ ifelse(gt_included_intl, yes, [
-+ AC_REQUIRE([AM_INTL_SUBDIR])dnl
-+ ])
-+
-+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
-+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
-+ AC_REQUIRE([AC_LIB_RPATH])
-+
-+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
-+ dnl Ideally we would do this search only after the
-+ dnl if test "$USE_NLS" = "yes"; then
-+ dnl if test "$gt_cv_func_gnugettext_libc" != "yes"; then
-+ dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
-+ dnl the configure script would need to contain the same shell code
-+ dnl again, outside any 'if'. There are two solutions:
-+ dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
-+ dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
-+ dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
-+ dnl documented, we avoid it.
-+ ifelse(gt_included_intl, yes, , [
-+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
-+ ])
-+
-+ dnl Set USE_NLS.
-+ AM_NLS
-+
-+ ifelse(gt_included_intl, yes, [
-+ BUILD_INCLUDED_LIBINTL=no
-+ USE_INCLUDED_LIBINTL=no
-+ ])
-+ LIBINTL=
-+ LTLIBINTL=
-+ POSUB=
-+
-+ dnl If we use NLS figure out what method
-+ if test "$USE_NLS" = "yes"; then
-+ gt_use_preinstalled_gnugettext=no
-+ ifelse(gt_included_intl, yes, [
-+ AC_MSG_CHECKING([whether included gettext is requested])
-+ AC_ARG_WITH(included-gettext,
-+ [ --with-included-gettext use the GNU gettext library included here],
-+ nls_cv_force_use_gnu_gettext=$withval,
-+ nls_cv_force_use_gnu_gettext=no)
-+ AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
-+
-+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
-+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
-+ ])
-+ dnl User does not insist on using GNU NLS library. Figure out what
-+ dnl to use. If GNU gettext is available we use this. Else we have
-+ dnl to fall back to GNU NLS library.
-+
-+ dnl Add a version number to the cache macros.
-+ define([gt_api_version], ifelse([$2], [need-formatstring-macros], 3, ifelse([$2], [need-ngettext], 2, 1)))
-+ define([gt_cv_func_gnugettext_libc], [gt_cv_func_gnugettext]gt_api_version[_libc])
-+ define([gt_cv_func_gnugettext_libintl], [gt_cv_func_gnugettext]gt_api_version[_libintl])
-+
-+ AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc,
-+ [AC_TRY_LINK([#include <libintl.h>
-+]ifelse([$2], [need-formatstring-macros],
-+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
-+#endif
-+changequote(,)dnl
-+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
-+changequote([,])dnl
-+], [])[extern int _nl_msg_cat_cntr;
-+extern int *_nl_domain_bindings;],
-+ [bindtextdomain ("", "");
-+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_domain_bindings],
-+ gt_cv_func_gnugettext_libc=yes,
-+ gt_cv_func_gnugettext_libc=no)])
-+
-+ if test "$gt_cv_func_gnugettext_libc" != "yes"; then
-+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
-+ ifelse(gt_included_intl, yes, , [
-+ AM_ICONV_LINK
-+ ])
-+ dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
-+ dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
-+ dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
-+ dnl even if libiconv doesn't exist.
-+ AC_LIB_LINKFLAGS_BODY([intl])
-+ AC_CACHE_CHECK([for GNU gettext in libintl],
-+ gt_cv_func_gnugettext_libintl,
-+ [gt_save_CPPFLAGS="$CPPFLAGS"
-+ CPPFLAGS="$CPPFLAGS $INCINTL"
-+ gt_save_LIBS="$LIBS"
-+ LIBS="$LIBS $LIBINTL"
-+ dnl Now see whether libintl exists and does not depend on libiconv.
-+ AC_TRY_LINK([#include <libintl.h>
-+]ifelse([$2], [need-formatstring-macros],
-+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
-+#endif
-+changequote(,)dnl
-+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
-+changequote([,])dnl
-+], [])[extern int _nl_msg_cat_cntr;
-+extern
-+#ifdef __cplusplus
-+"C"
-+#endif
-+const char *_nl_expand_alias ();],
-+ [bindtextdomain ("", "");
-+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)],
-+ gt_cv_func_gnugettext_libintl=yes,
-+ gt_cv_func_gnugettext_libintl=no)
-+ dnl Now see whether libintl exists and depends on libiconv.
-+ if test "$gt_cv_func_gnugettext_libintl" != yes && test -n "$LIBICONV"; then
-+ LIBS="$LIBS $LIBICONV"
-+ AC_TRY_LINK([#include <libintl.h>
-+]ifelse([$2], [need-formatstring-macros],
-+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
-+#endif
-+changequote(,)dnl
-+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
-+changequote([,])dnl
-+], [])[extern int _nl_msg_cat_cntr;
-+extern
-+#ifdef __cplusplus
-+"C"
-+#endif
-+const char *_nl_expand_alias ();],
-+ [bindtextdomain ("", "");
-+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)],
-+ [LIBINTL="$LIBINTL $LIBICONV"
-+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
-+ gt_cv_func_gnugettext_libintl=yes
-+ ])
-+ fi
-+ CPPFLAGS="$gt_save_CPPFLAGS"
-+ LIBS="$gt_save_LIBS"])
-+ fi
-+
-+ dnl If an already present or preinstalled GNU gettext() is found,
-+ dnl use it. But if this macro is used in GNU gettext, and GNU
-+ dnl gettext is already preinstalled in libintl, we update this
-+ dnl libintl. (Cf. the install rule in intl/Makefile.in.)
-+ if test "$gt_cv_func_gnugettext_libc" = "yes" \
-+ || { test "$gt_cv_func_gnugettext_libintl" = "yes" \
-+ && test "$PACKAGE" != gettext-runtime \
-+ && test "$PACKAGE" != gettext-tools; }; then
-+ gt_use_preinstalled_gnugettext=yes
-+ else
-+ dnl Reset the values set by searching for libintl.
-+ LIBINTL=
-+ LTLIBINTL=
-+ INCINTL=
-+ fi
-+
-+ ifelse(gt_included_intl, yes, [
-+ if test "$gt_use_preinstalled_gnugettext" != "yes"; then
-+ dnl GNU gettext is not found in the C library.
-+ dnl Fall back on included GNU gettext library.
-+ nls_cv_use_gnu_gettext=yes
-+ fi
-+ fi
-+
-+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
-+ dnl Mark actions used to generate GNU NLS library.
-+ BUILD_INCLUDED_LIBINTL=yes
-+ USE_INCLUDED_LIBINTL=yes
-+ LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV"
-+ LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV"
-+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
-+ fi
-+
-+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
-+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
-+ dnl Mark actions to use GNU gettext tools.
-+ CATOBJEXT=.gmo
-+ fi
-+ ])
-+
-+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
-+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
-+ AC_DEFINE(ENABLE_NLS, 1,
-+ [Define to 1 if translation of program messages to the user's native language
-+ is requested.])
-+ else
-+ USE_NLS=no
-+ fi
-+ fi
-+
-+ AC_MSG_CHECKING([whether to use NLS])
-+ AC_MSG_RESULT([$USE_NLS])
-+ if test "$USE_NLS" = "yes"; then
-+ AC_MSG_CHECKING([where the gettext function comes from])
-+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
-+ if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
-+ gt_source="external libintl"
-+ else
-+ gt_source="libc"
-+ fi
-+ else
-+ gt_source="included intl directory"
-+ fi
-+ AC_MSG_RESULT([$gt_source])
-+ fi
-+
-+ if test "$USE_NLS" = "yes"; then
-+
-+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
-+ if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
-+ AC_MSG_CHECKING([how to link with libintl])
-+ AC_MSG_RESULT([$LIBINTL])
-+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
-+ fi
-+
-+ dnl For backward compatibility. Some packages may be using this.
-+ AC_DEFINE(HAVE_GETTEXT, 1,
-+ [Define if the GNU gettext() function is already present or preinstalled.])
-+ AC_DEFINE(HAVE_DCGETTEXT, 1,
-+ [Define if the GNU dcgettext() function is already present or preinstalled.])
-+ fi
-+
-+ dnl We need to process the po/ directory.
-+ POSUB=po
-+ fi
-+
-+ ifelse(gt_included_intl, yes, [
-+ dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
-+ dnl to 'yes' because some of the testsuite requires it.
-+ if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
-+ BUILD_INCLUDED_LIBINTL=yes
-+ fi
-+
-+ dnl Make all variables we use known to autoconf.
-+ AC_SUBST(BUILD_INCLUDED_LIBINTL)
-+ AC_SUBST(USE_INCLUDED_LIBINTL)
-+ AC_SUBST(CATOBJEXT)
-+
-+ dnl For backward compatibility. Some configure.ins may be using this.
-+ nls_cv_header_intl=
-+ nls_cv_header_libgt=
-+
-+ dnl For backward compatibility. Some Makefiles may be using this.
-+ DATADIRNAME=share
-+ AC_SUBST(DATADIRNAME)
-+
-+ dnl For backward compatibility. Some Makefiles may be using this.
-+ INSTOBJEXT=.mo
-+ AC_SUBST(INSTOBJEXT)
-+
-+ dnl For backward compatibility. Some Makefiles may be using this.
-+ GENCAT=gencat
-+ AC_SUBST(GENCAT)
-+
-+ dnl For backward compatibility. Some Makefiles may be using this.
-+ if test "$USE_INCLUDED_LIBINTL" = yes; then
-+ INTLOBJS="\$(GETTOBJS)"
-+ fi
-+ AC_SUBST(INTLOBJS)
-+
-+ dnl Enable libtool support if the surrounding package wishes it.
-+ INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
-+ AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
-+ ])
-+
-+ dnl For backward compatibility. Some Makefiles may be using this.
-+ INTLLIBS="$LIBINTL"
-+ AC_SUBST(INTLLIBS)
-+
-+ dnl Make all documented variables known to autoconf.
-+ AC_SUBST(LIBINTL)
-+ AC_SUBST(LTLIBINTL)
-+ AC_SUBST(POSUB)
-+])
-+
-+
-+dnl Checks for all prerequisites of the intl subdirectory,
-+dnl except for INTL_LIBTOOL_SUFFIX_PREFIX (and possibly LIBTOOL), INTLOBJS,
-+dnl USE_INCLUDED_LIBINTL, BUILD_INCLUDED_LIBINTL.
-+AC_DEFUN([AM_INTL_SUBDIR],
-+[
-+ AC_REQUIRE([AC_PROG_INSTALL])dnl
-+ AC_REQUIRE([AM_MKINSTALLDIRS])dnl
-+ AC_REQUIRE([AC_PROG_CC])dnl
-+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
-+ AC_REQUIRE([AC_PROG_RANLIB])dnl
-+ AC_REQUIRE([AC_ISC_POSIX])dnl
-+ AC_REQUIRE([AC_HEADER_STDC])dnl
-+ AC_REQUIRE([AC_C_CONST])dnl
-+ AC_REQUIRE([bh_C_SIGNED])dnl
-+ AC_REQUIRE([AC_C_INLINE])dnl
-+ AC_REQUIRE([AC_TYPE_OFF_T])dnl
-+ AC_REQUIRE([AC_TYPE_SIZE_T])dnl
-+ AC_REQUIRE([jm_AC_TYPE_LONG_LONG])dnl
-+ AC_REQUIRE([gt_TYPE_LONGDOUBLE])dnl
-+ AC_REQUIRE([gt_TYPE_WCHAR_T])dnl
-+ AC_REQUIRE([gt_TYPE_WINT_T])dnl
-+ AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
-+ AC_REQUIRE([jm_AC_HEADER_STDINT_H])
-+ AC_REQUIRE([gt_TYPE_INTMAX_T])
-+ AC_REQUIRE([gt_PRINTF_POSIX])
-+ AC_REQUIRE([AC_FUNC_ALLOCA])dnl
-+ AC_REQUIRE([AC_FUNC_MMAP])dnl
-+ AC_REQUIRE([jm_GLIBC21])dnl
-+ AC_REQUIRE([gt_INTDIV0])dnl
-+ AC_REQUIRE([jm_AC_TYPE_UINTMAX_T])dnl
-+ AC_REQUIRE([gt_HEADER_INTTYPES_H])dnl
-+ AC_REQUIRE([gt_INTTYPES_PRI])dnl
-+ AC_REQUIRE([gl_XSIZE])dnl
-+
-+ AC_CHECK_TYPE([ptrdiff_t], ,
-+ [AC_DEFINE([ptrdiff_t], [long],
-+ [Define as the type of the result of subtracting two pointers, if the system doesn't define it.])
-+ ])
-+ AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
-+stdlib.h string.h unistd.h sys/param.h])
-+ AC_CHECK_FUNCS([asprintf fwprintf getcwd getegid geteuid getgid getuid \
-+mempcpy munmap putenv setenv setlocale snprintf stpcpy strcasecmp strdup \
-+strtoul tsearch wcslen __argz_count __argz_stringify __argz_next \
-+__fsetlocking])
-+
-+ dnl Use the _snprintf function only if it is declared (because on NetBSD it
-+ dnl is defined as a weak alias of snprintf; we prefer to use the latter).
-+ gt_CHECK_DECL(_snprintf, [#include <stdio.h>])
-+ gt_CHECK_DECL(_snwprintf, [#include <stdio.h>])
-+
-+ dnl Use the *_unlocked functions only if they are declared.
-+ dnl (because some of them were defined without being declared in Solaris
-+ dnl 2.5.1 but were removed in Solaris 2.6, whereas we want binaries built
-+ dnl on Solaris 2.5.1 to run on Solaris 2.6).
-+ dnl Don't use AC_CHECK_DECLS because it isn't supported in autoconf-2.13.
-+ gt_CHECK_DECL(feof_unlocked, [#include <stdio.h>])
-+ gt_CHECK_DECL(fgets_unlocked, [#include <stdio.h>])
-+ gt_CHECK_DECL(getc_unlocked, [#include <stdio.h>])
-+
-+ case $gt_cv_func_printf_posix in
-+ *yes) HAVE_POSIX_PRINTF=1 ;;
-+ *) HAVE_POSIX_PRINTF=0 ;;
-+ esac
-+ AC_SUBST([HAVE_POSIX_PRINTF])
-+ if test "$ac_cv_func_asprintf" = yes; then
-+ HAVE_ASPRINTF=1
-+ else
-+ HAVE_ASPRINTF=0
-+ fi
-+ AC_SUBST([HAVE_ASPRINTF])
-+ if test "$ac_cv_func_snprintf" = yes; then
-+ HAVE_SNPRINTF=1
-+ else
-+ HAVE_SNPRINTF=0
-+ fi
-+ AC_SUBST([HAVE_SNPRINTF])
-+ if test "$ac_cv_func_wprintf" = yes; then
-+ HAVE_WPRINTF=1
-+ else
-+ HAVE_WPRINTF=0
-+ fi
-+ AC_SUBST([HAVE_WPRINTF])
-+
-+ AM_ICONV
-+ AM_LANGINFO_CODESET
-+ if test $ac_cv_header_locale_h = yes; then
-+ AM_LC_MESSAGES
-+ fi
-+
-+ dnl intl/plural.c is generated from intl/plural.y. It requires bison,
-+ dnl because plural.y uses bison specific features. It requires at least
-+ dnl bison-1.26 because earlier versions generate a plural.c that doesn't
-+ dnl compile.
-+ dnl bison is only needed for the maintainer (who touches plural.y). But in
-+ dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put
-+ dnl the rule in general Makefile. Now, some people carelessly touch the
-+ dnl files or have a broken "make" program, hence the plural.c rule will
-+ dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not
-+ dnl present or too old.
-+ AC_CHECK_PROGS([INTLBISON], [bison])
-+ if test -z "$INTLBISON"; then
-+ ac_verc_fail=yes
-+ else
-+ dnl Found it, now check the version.
-+ AC_MSG_CHECKING([version of bison])
-+changequote(<<,>>)dnl
-+ ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
-+ case $ac_prog_version in
-+ '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
-+ 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
-+changequote([,])dnl
-+ ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
-+ *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
-+ esac
-+ AC_MSG_RESULT([$ac_prog_version])
-+ fi
-+ if test $ac_verc_fail = yes; then
-+ INTLBISON=:
-+ fi
-+])
-+
-+
-+dnl gt_CHECK_DECL(FUNC, INCLUDES)
-+dnl Check whether a function is declared.
-+AC_DEFUN([gt_CHECK_DECL],
-+[
-+ AC_CACHE_CHECK([whether $1 is declared], ac_cv_have_decl_$1,
-+ [AC_TRY_COMPILE([$2], [
-+#ifndef $1
-+ char *p = (char *) $1;
-+#endif
-+], ac_cv_have_decl_$1=yes, ac_cv_have_decl_$1=no)])
-+ if test $ac_cv_have_decl_$1 = yes; then
-+ gt_value=1
-+ else
-+ gt_value=0
-+ fi
-+ AC_DEFINE_UNQUOTED([HAVE_DECL_]translit($1, [a-z], [A-Z]), [$gt_value],
-+ [Define to 1 if you have the declaration of `$1', and to 0 if you don't.])
-+])
-+
-+
-+dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
-+AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
---- lrzsz-0.12.20.safe/m4/glibc21.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/glibc21.m4 2004-09-12 14:40:34.833675432 -0400
-@@ -0,0 +1,32 @@
-+# glibc21.m4 serial 2 (fileutils-4.1.3, gettext-0.10.40)
-+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+# Test for the GNU C Library, version 2.1 or newer.
-+# From Bruno Haible.
-+
-+AC_DEFUN([jm_GLIBC21],
-+ [
-+ AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer,
-+ ac_cv_gnu_library_2_1,
-+ [AC_EGREP_CPP([Lucky GNU user],
-+ [
-+#include <features.h>
-+#ifdef __GNU_LIBRARY__
-+ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
-+ Lucky GNU user
-+ #endif
-+#endif
-+ ],
-+ ac_cv_gnu_library_2_1=yes,
-+ ac_cv_gnu_library_2_1=no)
-+ ]
-+ )
-+ AC_SUBST(GLIBC21)
-+ GLIBC21="$ac_cv_gnu_library_2_1"
-+ ]
-+)
---- lrzsz-0.12.20.safe/m4/iconv.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/iconv.m4 2004-09-12 14:40:34.839674520 -0400
-@@ -0,0 +1,103 @@
-+# iconv.m4 serial AM4 (gettext-0.11.3)
-+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Bruno Haible.
-+
-+AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
-+[
-+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
-+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
-+ AC_REQUIRE([AC_LIB_RPATH])
-+
-+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
-+ dnl accordingly.
-+ AC_LIB_LINKFLAGS_BODY([iconv])
-+])
-+
-+AC_DEFUN([AM_ICONV_LINK],
-+[
-+ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
-+ dnl those with the standalone portable GNU libiconv installed).
-+
-+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
-+ dnl accordingly.
-+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
-+
-+ dnl Add $INCICONV to CPPFLAGS before performing the following checks,
-+ dnl because if the user has installed libiconv and not disabled its use
-+ dnl via --without-libiconv-prefix, he wants to use it. The first
-+ dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
-+ am_save_CPPFLAGS="$CPPFLAGS"
-+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
-+
-+ AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
-+ am_cv_func_iconv="no, consider installing GNU libiconv"
-+ am_cv_lib_iconv=no
-+ AC_TRY_LINK([#include <stdlib.h>
-+#include <iconv.h>],
-+ [iconv_t cd = iconv_open("","");
-+ iconv(cd,NULL,NULL,NULL,NULL);
-+ iconv_close(cd);],
-+ am_cv_func_iconv=yes)
-+ if test "$am_cv_func_iconv" != yes; then
-+ am_save_LIBS="$LIBS"
-+ LIBS="$LIBS $LIBICONV"
-+ AC_TRY_LINK([#include <stdlib.h>
-+#include <iconv.h>],
-+ [iconv_t cd = iconv_open("","");
-+ iconv(cd,NULL,NULL,NULL,NULL);
-+ iconv_close(cd);],
-+ am_cv_lib_iconv=yes
-+ am_cv_func_iconv=yes)
-+ LIBS="$am_save_LIBS"
-+ fi
-+ ])
-+ if test "$am_cv_func_iconv" = yes; then
-+ AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
-+ fi
-+ if test "$am_cv_lib_iconv" = yes; then
-+ AC_MSG_CHECKING([how to link with libiconv])
-+ AC_MSG_RESULT([$LIBICONV])
-+ else
-+ dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
-+ dnl either.
-+ CPPFLAGS="$am_save_CPPFLAGS"
-+ LIBICONV=
-+ LTLIBICONV=
-+ fi
-+ AC_SUBST(LIBICONV)
-+ AC_SUBST(LTLIBICONV)
-+])
-+
-+AC_DEFUN([AM_ICONV],
-+[
-+ AM_ICONV_LINK
-+ if test "$am_cv_func_iconv" = yes; then
-+ AC_MSG_CHECKING([for iconv declaration])
-+ AC_CACHE_VAL(am_cv_proto_iconv, [
-+ AC_TRY_COMPILE([
-+#include <stdlib.h>
-+#include <iconv.h>
-+extern
-+#ifdef __cplusplus
-+"C"
-+#endif
-+#if defined(__STDC__) || defined(__cplusplus)
-+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
-+#else
-+size_t iconv();
-+#endif
-+], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
-+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
-+ am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
-+ AC_MSG_RESULT([$]{ac_t:-
-+ }[$]am_cv_proto_iconv)
-+ AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
-+ [Define as const if the declaration of iconv() needs const.])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/intdiv0.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/intdiv0.m4 2004-09-12 14:40:34.845673608 -0400
-@@ -0,0 +1,72 @@
-+# intdiv0.m4 serial 1 (gettext-0.11.3)
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Bruno Haible.
-+
-+AC_DEFUN([gt_INTDIV0],
-+[
-+ AC_REQUIRE([AC_PROG_CC])dnl
-+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
-+
-+ AC_CACHE_CHECK([whether integer division by zero raises SIGFPE],
-+ gt_cv_int_divbyzero_sigfpe,
-+ [
-+ AC_TRY_RUN([
-+#include <stdlib.h>
-+#include <signal.h>
-+
-+static void
-+#ifdef __cplusplus
-+sigfpe_handler (int sig)
-+#else
-+sigfpe_handler (sig) int sig;
-+#endif
-+{
-+ /* Exit with code 0 if SIGFPE, with code 1 if any other signal. */
-+ exit (sig != SIGFPE);
-+}
-+
-+int x = 1;
-+int y = 0;
-+int z;
-+int nan;
-+
-+int main ()
-+{
-+ signal (SIGFPE, sigfpe_handler);
-+/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP. */
-+#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP)
-+ signal (SIGTRAP, sigfpe_handler);
-+#endif
-+/* Linux/SPARC yields signal SIGILL. */
-+#if defined (__sparc__) && defined (__linux__)
-+ signal (SIGILL, sigfpe_handler);
-+#endif
-+
-+ z = x / y;
-+ nan = y / y;
-+ exit (1);
-+}
-+], gt_cv_int_divbyzero_sigfpe=yes, gt_cv_int_divbyzero_sigfpe=no,
-+ [
-+ # Guess based on the CPU.
-+ case "$host_cpu" in
-+ alpha* | i[34567]86 | m68k | s390*)
-+ gt_cv_int_divbyzero_sigfpe="guessing yes";;
-+ *)
-+ gt_cv_int_divbyzero_sigfpe="guessing no";;
-+ esac
-+ ])
-+ ])
-+ case "$gt_cv_int_divbyzero_sigfpe" in
-+ *yes) value=1;;
-+ *) value=0;;
-+ esac
-+ AC_DEFINE_UNQUOTED(INTDIV0_RAISES_SIGFPE, $value,
-+ [Define if integer division by zero raises signal SIGFPE.])
-+])
---- lrzsz-0.12.20.safe/m4/intmax.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/intmax.m4 2004-09-12 14:40:34.855672088 -0400
-@@ -0,0 +1,32 @@
-+# intmax.m4 serial 1 (gettext-0.12)
-+dnl Copyright (C) 2002-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Bruno Haible.
-+dnl Test whether the system has the 'intmax_t' type, but don't attempt to
-+dnl find a replacement if it is lacking.
-+
-+AC_DEFUN([gt_TYPE_INTMAX_T],
-+[
-+ AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
-+ AC_REQUIRE([jm_AC_HEADER_STDINT_H])
-+ AC_CACHE_CHECK(for intmax_t, gt_cv_c_intmax_t,
-+ [AC_TRY_COMPILE([
-+#include <stddef.h>
-+#include <stdlib.h>
-+#if HAVE_STDINT_H_WITH_UINTMAX
-+#include <stdint.h>
-+#endif
-+#if HAVE_INTTYPES_H_WITH_UINTMAX
-+#include <inttypes.h>
-+#endif
-+], [intmax_t x = -1;], gt_cv_c_intmax_t=yes, gt_cv_c_intmax_t=no)])
-+ if test $gt_cv_c_intmax_t = yes; then
-+ AC_DEFINE(HAVE_INTMAX_T, 1,
-+ [Define if you have the 'intmax_t' type in <stdint.h> or <inttypes.h>.])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/inttypes_h.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/inttypes_h.m4 2004-09-12 14:40:34.868670112 -0400
-@@ -0,0 +1,28 @@
-+# inttypes_h.m4 serial 5 (gettext-0.12)
-+dnl Copyright (C) 1997-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Paul Eggert.
-+
-+# Define HAVE_INTTYPES_H_WITH_UINTMAX if <inttypes.h> exists,
-+# doesn't clash with <sys/types.h>, and declares uintmax_t.
-+
-+AC_DEFUN([jm_AC_HEADER_INTTYPES_H],
-+[
-+ AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h,
-+ [AC_TRY_COMPILE(
-+ [#include <sys/types.h>
-+#include <inttypes.h>],
-+ [uintmax_t i = (uintmax_t) -1;],
-+ jm_ac_cv_header_inttypes_h=yes,
-+ jm_ac_cv_header_inttypes_h=no)])
-+ if test $jm_ac_cv_header_inttypes_h = yes; then
-+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H_WITH_UINTMAX, 1,
-+ [Define if <inttypes.h> exists, doesn't clash with <sys/types.h>,
-+ and declares uintmax_t. ])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/inttypes.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/inttypes.m4 2004-09-12 14:40:34.861671176 -0400
-@@ -0,0 +1,27 @@
-+# inttypes.m4 serial 1 (gettext-0.11.4)
-+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Paul Eggert.
-+
-+# Define HAVE_INTTYPES_H if <inttypes.h> exists and doesn't clash with
-+# <sys/types.h>.
-+
-+AC_DEFUN([gt_HEADER_INTTYPES_H],
-+[
-+ AC_CACHE_CHECK([for inttypes.h], gt_cv_header_inttypes_h,
-+ [
-+ AC_TRY_COMPILE(
-+ [#include <sys/types.h>
-+#include <inttypes.h>],
-+ [], gt_cv_header_inttypes_h=yes, gt_cv_header_inttypes_h=no)
-+ ])
-+ if test $gt_cv_header_inttypes_h = yes; then
-+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1,
-+ [Define if <inttypes.h> exists and doesn't clash with <sys/types.h>.])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/inttypes-pri.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/inttypes-pri.m4 2004-09-12 14:40:34.874669200 -0400
-@@ -0,0 +1,32 @@
-+# inttypes-pri.m4 serial 1 (gettext-0.11.4)
-+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Bruno Haible.
-+
-+# Define PRI_MACROS_BROKEN if <inttypes.h> exists and defines the PRI*
-+# macros to non-string values. This is the case on AIX 4.3.3.
-+
-+AC_DEFUN([gt_INTTYPES_PRI],
-+[
-+ AC_REQUIRE([gt_HEADER_INTTYPES_H])
-+ if test $gt_cv_header_inttypes_h = yes; then
-+ AC_CACHE_CHECK([whether the inttypes.h PRIxNN macros are broken],
-+ gt_cv_inttypes_pri_broken,
-+ [
-+ AC_TRY_COMPILE([#include <inttypes.h>
-+#ifdef PRId32
-+char *p = PRId32;
-+#endif
-+], [], gt_cv_inttypes_pri_broken=no, gt_cv_inttypes_pri_broken=yes)
-+ ])
-+ fi
-+ if test "$gt_cv_inttypes_pri_broken" = yes; then
-+ AC_DEFINE_UNQUOTED(PRI_MACROS_BROKEN, 1,
-+ [Define if <inttypes.h> exists and defines unusable PRI* macros.])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/isc-posix.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/isc-posix.m4 2004-09-12 14:40:34.885667528 -0400
-@@ -0,0 +1,26 @@
-+# isc-posix.m4 serial 2 (gettext-0.11.2)
-+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+# This file is not needed with autoconf-2.53 and newer. Remove it in 2005.
-+
-+# This test replaces the one in autoconf.
-+# Currently this macro should have the same name as the autoconf macro
-+# because gettext's gettext.m4 (distributed in the automake package)
-+# still uses it. Otherwise, the use in gettext.m4 makes autoheader
-+# give these diagnostics:
-+# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
-+# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
-+
-+undefine([AC_ISC_POSIX])
-+
-+AC_DEFUN([AC_ISC_POSIX],
-+ [
-+ dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
-+ AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
-+ ]
-+)
---- lrzsz-0.12.20.safe/m4/lcmessage.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/lcmessage.m4 2004-09-12 14:40:34.902664944 -0400
-@@ -0,0 +1,32 @@
-+# lcmessage.m4 serial 3 (gettext-0.11.3)
-+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+dnl
-+dnl This file can can be used in projects which are not available under
-+dnl the GNU General Public License or the GNU Library General Public
-+dnl License but which still want to provide support for the GNU gettext
-+dnl functionality.
-+dnl Please note that the actual code of the GNU gettext library is covered
-+dnl by the GNU Library General Public License, and the rest of the GNU
-+dnl gettext package package is covered by the GNU General Public License.
-+dnl They are *not* in the public domain.
-+
-+dnl Authors:
-+dnl Ulrich Drepper <drepper@cygnus.com>, 1995.
-+
-+# Check whether LC_MESSAGES is available in <locale.h>.
-+
-+AC_DEFUN([AM_LC_MESSAGES],
-+[
-+ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
-+ [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
-+ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
-+ if test $am_cv_val_LC_MESSAGES = yes; then
-+ AC_DEFINE(HAVE_LC_MESSAGES, 1,
-+ [Define if your <locale.h> file defines LC_MESSAGES.])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/lib-ld.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/lib-ld.m4 2004-09-12 14:40:34.908664032 -0400
-@@ -0,0 +1,112 @@
-+# lib-ld.m4 serial 3 (gettext-0.13)
-+dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl Subroutines of libtool.m4,
-+dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
-+dnl with libtool.m4.
-+
-+dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
-+AC_DEFUN([AC_LIB_PROG_LD_GNU],
-+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
-+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-+case `$LD -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+ acl_cv_prog_gnu_ld=yes ;;
-+*)
-+ acl_cv_prog_gnu_ld=no ;;
-+esac])
-+with_gnu_ld=$acl_cv_prog_gnu_ld
-+])
-+
-+dnl From libtool-1.4. Sets the variable LD.
-+AC_DEFUN([AC_LIB_PROG_LD],
-+[AC_ARG_WITH(gnu-ld,
-+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-+AC_REQUIRE([AC_PROG_CC])dnl
-+AC_REQUIRE([AC_CANONICAL_HOST])dnl
-+# Prepare PATH_SEPARATOR.
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+ac_prog=ld
-+if test "$GCC" = yes; then
-+ # Check if gcc -print-prog-name=ld gives a path.
-+ AC_MSG_CHECKING([for ld used by GCC])
-+ case $host in
-+ *-*-mingw*)
-+ # gcc leaves a trailing carriage return which upsets mingw
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+ *)
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+ esac
-+ case $ac_prog in
-+ # Accept absolute paths.
-+ [[\\/]* | [A-Za-z]:[\\/]*)]
-+ [re_direlt='/[^/][^/]*/\.\./']
-+ # Canonicalize the path of ld
-+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-+ done
-+ test -z "$LD" && LD="$ac_prog"
-+ ;;
-+ "")
-+ # If it fails, then pretend we aren't using GCC.
-+ ac_prog=ld
-+ ;;
-+ *)
-+ # If it is relative, then search for the first ld in PATH.
-+ with_gnu_ld=unknown
-+ ;;
-+ esac
-+elif test "$with_gnu_ld" = yes; then
-+ AC_MSG_CHECKING([for GNU ld])
-+else
-+ AC_MSG_CHECKING([for non-GNU ld])
-+fi
-+AC_CACHE_VAL(acl_cv_path_LD,
-+[if test -z "$LD"; then
-+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-+ for ac_dir in $PATH; do
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+ acl_cv_path_LD="$ac_dir/$ac_prog"
-+ # Check to see if the program is GNU ld. I'd rather use --version,
-+ # but apparently some GNU ld's only accept -v.
-+ # Break only if it was the GNU/non-GNU ld that we prefer.
-+ case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
-+ *GNU* | *'with BFD'*)
-+ test "$with_gnu_ld" != no && break ;;
-+ *)
-+ test "$with_gnu_ld" != yes && break ;;
-+ esac
-+ fi
-+ done
-+ IFS="$ac_save_ifs"
-+else
-+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
-+fi])
-+LD="$acl_cv_path_LD"
-+if test -n "$LD"; then
-+ AC_MSG_RESULT($LD)
-+else
-+ AC_MSG_RESULT(no)
-+fi
-+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-+AC_LIB_PROG_LD_GNU
-+])
---- lrzsz-0.12.20.safe/m4/lib-link.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/lib-link.m4 2004-09-12 14:40:34.914663120 -0400
-@@ -0,0 +1,551 @@
-+# lib-link.m4 serial 4 (gettext-0.12)
-+dnl Copyright (C) 2001-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Bruno Haible.
-+
-+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
-+dnl the libraries corresponding to explicit and implicit dependencies.
-+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
-+dnl augments the CPPFLAGS variable.
-+AC_DEFUN([AC_LIB_LINKFLAGS],
-+[
-+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
-+ AC_REQUIRE([AC_LIB_RPATH])
-+ define([Name],[translit([$1],[./-], [___])])
-+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
-+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-+ AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
-+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
-+ ac_cv_lib[]Name[]_libs="$LIB[]NAME"
-+ ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
-+ ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
-+ ])
-+ LIB[]NAME="$ac_cv_lib[]Name[]_libs"
-+ LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
-+ INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
-+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-+ AC_SUBST([LIB]NAME)
-+ AC_SUBST([LTLIB]NAME)
-+ dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
-+ dnl results of this search when this library appears as a dependency.
-+ HAVE_LIB[]NAME=yes
-+ undefine([Name])
-+ undefine([NAME])
-+])
-+
-+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
-+dnl searches for libname and the libraries corresponding to explicit and
-+dnl implicit dependencies, together with the specified include files and
-+dnl the ability to compile and link the specified testcode. If found, it
-+dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
-+dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
-+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
-+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
-+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
-+[
-+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
-+ AC_REQUIRE([AC_LIB_RPATH])
-+ define([Name],[translit([$1],[./-], [___])])
-+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
-+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-+
-+ dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
-+ dnl accordingly.
-+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
-+
-+ dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
-+ dnl because if the user has installed lib[]Name and not disabled its use
-+ dnl via --without-lib[]Name-prefix, he wants to use it.
-+ ac_save_CPPFLAGS="$CPPFLAGS"
-+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-+
-+ AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
-+ ac_save_LIBS="$LIBS"
-+ LIBS="$LIBS $LIB[]NAME"
-+ AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
-+ LIBS="$ac_save_LIBS"
-+ ])
-+ if test "$ac_cv_lib[]Name" = yes; then
-+ HAVE_LIB[]NAME=yes
-+ AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
-+ AC_MSG_CHECKING([how to link with lib[]$1])
-+ AC_MSG_RESULT([$LIB[]NAME])
-+ else
-+ HAVE_LIB[]NAME=no
-+ dnl If $LIB[]NAME didn't lead to a usable library, we don't need
-+ dnl $INC[]NAME either.
-+ CPPFLAGS="$ac_save_CPPFLAGS"
-+ LIB[]NAME=
-+ LTLIB[]NAME=
-+ fi
-+ AC_SUBST([HAVE_LIB]NAME)
-+ AC_SUBST([LIB]NAME)
-+ AC_SUBST([LTLIB]NAME)
-+ undefine([Name])
-+ undefine([NAME])
-+])
-+
-+dnl Determine the platform dependent parameters needed to use rpath:
-+dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
-+dnl hardcode_direct, hardcode_minus_L.
-+AC_DEFUN([AC_LIB_RPATH],
-+[
-+ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
-+ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
-+ AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
-+ AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
-+ AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
-+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
-+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
-+ . ./conftest.sh
-+ rm -f ./conftest.sh
-+ acl_cv_rpath=done
-+ ])
-+ wl="$acl_cv_wl"
-+ libext="$acl_cv_libext"
-+ shlibext="$acl_cv_shlibext"
-+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
-+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
-+ hardcode_direct="$acl_cv_hardcode_direct"
-+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
-+ dnl Determine whether the user wants rpath handling at all.
-+ AC_ARG_ENABLE(rpath,
-+ [ --disable-rpath do not hardcode runtime library paths],
-+ :, enable_rpath=yes)
-+])
-+
-+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
-+dnl the libraries corresponding to explicit and implicit dependencies.
-+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
-+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
-+[
-+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
-+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-+ dnl By default, look in $includedir and $libdir.
-+ use_additional=yes
-+ AC_LIB_WITH_FINAL_PREFIX([
-+ eval additional_includedir=\"$includedir\"
-+ eval additional_libdir=\"$libdir\"
-+ ])
-+ AC_LIB_ARG_WITH([lib$1-prefix],
-+[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
-+ --without-lib$1-prefix don't search for lib$1 in includedir and libdir],
-+[
-+ if test "X$withval" = "Xno"; then
-+ use_additional=no
-+ else
-+ if test "X$withval" = "X"; then
-+ AC_LIB_WITH_FINAL_PREFIX([
-+ eval additional_includedir=\"$includedir\"
-+ eval additional_libdir=\"$libdir\"
-+ ])
-+ else
-+ additional_includedir="$withval/include"
-+ additional_libdir="$withval/lib"
-+ fi
-+ fi
-+])
-+ dnl Search the library and its dependencies in $additional_libdir and
-+ dnl $LDFLAGS. Using breadth-first-seach.
-+ LIB[]NAME=
-+ LTLIB[]NAME=
-+ INC[]NAME=
-+ rpathdirs=
-+ ltrpathdirs=
-+ names_already_handled=
-+ names_next_round='$1 $2'
-+ while test -n "$names_next_round"; do
-+ names_this_round="$names_next_round"
-+ names_next_round=
-+ for name in $names_this_round; do
-+ already_handled=
-+ for n in $names_already_handled; do
-+ if test "$n" = "$name"; then
-+ already_handled=yes
-+ break
-+ fi
-+ done
-+ if test -z "$already_handled"; then
-+ names_already_handled="$names_already_handled $name"
-+ dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
-+ dnl or AC_LIB_HAVE_LINKFLAGS call.
-+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
-+ eval value=\"\$HAVE_LIB$uppername\"
-+ if test -n "$value"; then
-+ if test "$value" = yes; then
-+ eval value=\"\$LIB$uppername\"
-+ test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
-+ eval value=\"\$LTLIB$uppername\"
-+ test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
-+ else
-+ dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
-+ dnl that this library doesn't exist. So just drop it.
-+ :
-+ fi
-+ else
-+ dnl Search the library lib$name in $additional_libdir and $LDFLAGS
-+ dnl and the already constructed $LIBNAME/$LTLIBNAME.
-+ found_dir=
-+ found_la=
-+ found_so=
-+ found_a=
-+ if test $use_additional = yes; then
-+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
-+ found_dir="$additional_libdir"
-+ found_so="$additional_libdir/lib$name.$shlibext"
-+ if test -f "$additional_libdir/lib$name.la"; then
-+ found_la="$additional_libdir/lib$name.la"
-+ fi
-+ else
-+ if test -f "$additional_libdir/lib$name.$libext"; then
-+ found_dir="$additional_libdir"
-+ found_a="$additional_libdir/lib$name.$libext"
-+ if test -f "$additional_libdir/lib$name.la"; then
-+ found_la="$additional_libdir/lib$name.la"
-+ fi
-+ fi
-+ fi
-+ fi
-+ if test "X$found_dir" = "X"; then
-+ for x in $LDFLAGS $LTLIB[]NAME; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ case "$x" in
-+ -L*)
-+ dir=`echo "X$x" | sed -e 's/^X-L//'`
-+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
-+ found_dir="$dir"
-+ found_so="$dir/lib$name.$shlibext"
-+ if test -f "$dir/lib$name.la"; then
-+ found_la="$dir/lib$name.la"
-+ fi
-+ else
-+ if test -f "$dir/lib$name.$libext"; then
-+ found_dir="$dir"
-+ found_a="$dir/lib$name.$libext"
-+ if test -f "$dir/lib$name.la"; then
-+ found_la="$dir/lib$name.la"
-+ fi
-+ fi
-+ fi
-+ ;;
-+ esac
-+ if test "X$found_dir" != "X"; then
-+ break
-+ fi
-+ done
-+ fi
-+ if test "X$found_dir" != "X"; then
-+ dnl Found the library.
-+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
-+ if test "X$found_so" != "X"; then
-+ dnl Linking with a shared library. We attempt to hardcode its
-+ dnl directory into the executable's runpath, unless it's the
-+ dnl standard /usr/lib.
-+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
-+ dnl No hardcoding is needed.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-+ else
-+ dnl Use an explicit option to hardcode DIR into the resulting
-+ dnl binary.
-+ dnl Potentially add DIR to ltrpathdirs.
-+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
-+ haveit=
-+ for x in $ltrpathdirs; do
-+ if test "X$x" = "X$found_dir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ ltrpathdirs="$ltrpathdirs $found_dir"
-+ fi
-+ dnl The hardcoding into $LIBNAME is system dependent.
-+ if test "$hardcode_direct" = yes; then
-+ dnl Using DIR/libNAME.so during linking hardcodes DIR into the
-+ dnl resulting binary.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-+ else
-+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
-+ dnl Use an explicit option to hardcode DIR into the resulting
-+ dnl binary.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-+ dnl Potentially add DIR to rpathdirs.
-+ dnl The rpathdirs will be appended to $LIBNAME at the end.
-+ haveit=
-+ for x in $rpathdirs; do
-+ if test "X$x" = "X$found_dir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ rpathdirs="$rpathdirs $found_dir"
-+ fi
-+ else
-+ dnl Rely on "-L$found_dir".
-+ dnl But don't add it if it's already contained in the LDFLAGS
-+ dnl or the already constructed $LIBNAME
-+ haveit=
-+ for x in $LDFLAGS $LIB[]NAME; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ if test "X$x" = "X-L$found_dir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
-+ fi
-+ if test "$hardcode_minus_L" != no; then
-+ dnl FIXME: Not sure whether we should use
-+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
-+ dnl here.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-+ else
-+ dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
-+ dnl here, because this doesn't fit in flags passed to the
-+ dnl compiler. So give up. No hardcoding. This affects only
-+ dnl very old systems.
-+ dnl FIXME: Not sure whether we should use
-+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
-+ dnl here.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
-+ fi
-+ fi
-+ fi
-+ fi
-+ else
-+ if test "X$found_a" != "X"; then
-+ dnl Linking with a static library.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
-+ else
-+ dnl We shouldn't come here, but anyway it's good to have a
-+ dnl fallback.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
-+ fi
-+ fi
-+ dnl Assume the include files are nearby.
-+ additional_includedir=
-+ case "$found_dir" in
-+ */lib | */lib/)
-+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
-+ additional_includedir="$basedir/include"
-+ ;;
-+ esac
-+ if test "X$additional_includedir" != "X"; then
-+ dnl Potentially add $additional_includedir to $INCNAME.
-+ dnl But don't add it
-+ dnl 1. if it's the standard /usr/include,
-+ dnl 2. if it's /usr/local/include and we are using GCC on Linux,
-+ dnl 3. if it's already present in $CPPFLAGS or the already
-+ dnl constructed $INCNAME,
-+ dnl 4. if it doesn't exist as a directory.
-+ if test "X$additional_includedir" != "X/usr/include"; then
-+ haveit=
-+ if test "X$additional_includedir" = "X/usr/local/include"; then
-+ if test -n "$GCC"; then
-+ case $host_os in
-+ linux*) haveit=yes;;
-+ esac
-+ fi
-+ fi
-+ if test -z "$haveit"; then
-+ for x in $CPPFLAGS $INC[]NAME; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ if test "X$x" = "X-I$additional_includedir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ if test -d "$additional_includedir"; then
-+ dnl Really add $additional_includedir to $INCNAME.
-+ INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
-+ fi
-+ fi
-+ fi
-+ fi
-+ fi
-+ dnl Look for dependencies.
-+ if test -n "$found_la"; then
-+ dnl Read the .la file. It defines the variables
-+ dnl dlname, library_names, old_library, dependency_libs, current,
-+ dnl age, revision, installed, dlopen, dlpreopen, libdir.
-+ save_libdir="$libdir"
-+ case "$found_la" in
-+ */* | *\\*) . "$found_la" ;;
-+ *) . "./$found_la" ;;
-+ esac
-+ libdir="$save_libdir"
-+ dnl We use only dependency_libs.
-+ for dep in $dependency_libs; do
-+ case "$dep" in
-+ -L*)
-+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
-+ dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
-+ dnl But don't add it
-+ dnl 1. if it's the standard /usr/lib,
-+ dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
-+ dnl 3. if it's already present in $LDFLAGS or the already
-+ dnl constructed $LIBNAME,
-+ dnl 4. if it doesn't exist as a directory.
-+ if test "X$additional_libdir" != "X/usr/lib"; then
-+ haveit=
-+ if test "X$additional_libdir" = "X/usr/local/lib"; then
-+ if test -n "$GCC"; then
-+ case $host_os in
-+ linux*) haveit=yes;;
-+ esac
-+ fi
-+ fi
-+ if test -z "$haveit"; then
-+ haveit=
-+ for x in $LDFLAGS $LIB[]NAME; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ if test "X$x" = "X-L$additional_libdir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ if test -d "$additional_libdir"; then
-+ dnl Really add $additional_libdir to $LIBNAME.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
-+ fi
-+ fi
-+ haveit=
-+ for x in $LDFLAGS $LTLIB[]NAME; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ if test "X$x" = "X-L$additional_libdir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ if test -d "$additional_libdir"; then
-+ dnl Really add $additional_libdir to $LTLIBNAME.
-+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
-+ fi
-+ fi
-+ fi
-+ fi
-+ ;;
-+ -R*)
-+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
-+ if test "$enable_rpath" != no; then
-+ dnl Potentially add DIR to rpathdirs.
-+ dnl The rpathdirs will be appended to $LIBNAME at the end.
-+ haveit=
-+ for x in $rpathdirs; do
-+ if test "X$x" = "X$dir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ rpathdirs="$rpathdirs $dir"
-+ fi
-+ dnl Potentially add DIR to ltrpathdirs.
-+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
-+ haveit=
-+ for x in $ltrpathdirs; do
-+ if test "X$x" = "X$dir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ ltrpathdirs="$ltrpathdirs $dir"
-+ fi
-+ fi
-+ ;;
-+ -l*)
-+ dnl Handle this in the next round.
-+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
-+ ;;
-+ *.la)
-+ dnl Handle this in the next round. Throw away the .la's
-+ dnl directory; it is already contained in a preceding -L
-+ dnl option.
-+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
-+ ;;
-+ *)
-+ dnl Most likely an immediate library name.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
-+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
-+ ;;
-+ esac
-+ done
-+ fi
-+ else
-+ dnl Didn't find the library; assume it is in the system directories
-+ dnl known to the linker and runtime loader. (All the system
-+ dnl directories known to the linker should also be known to the
-+ dnl runtime loader, otherwise the system is severely misconfigured.)
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
-+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
-+ fi
-+ fi
-+ fi
-+ done
-+ done
-+ if test "X$rpathdirs" != "X"; then
-+ if test -n "$hardcode_libdir_separator"; then
-+ dnl Weird platform: only the last -rpath option counts, the user must
-+ dnl pass all path elements in one option. We can arrange that for a
-+ dnl single library, but not when more than one $LIBNAMEs are used.
-+ alldirs=
-+ for found_dir in $rpathdirs; do
-+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
-+ done
-+ dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
-+ acl_save_libdir="$libdir"
-+ libdir="$alldirs"
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+ libdir="$acl_save_libdir"
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
-+ else
-+ dnl The -rpath options are cumulative.
-+ for found_dir in $rpathdirs; do
-+ acl_save_libdir="$libdir"
-+ libdir="$found_dir"
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+ libdir="$acl_save_libdir"
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
-+ done
-+ fi
-+ fi
-+ if test "X$ltrpathdirs" != "X"; then
-+ dnl When using libtool, the option that works for both libraries and
-+ dnl executables is -R. The -R options are cumulative.
-+ for found_dir in $ltrpathdirs; do
-+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
-+ done
-+ fi
-+])
-+
-+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
-+dnl unless already present in VAR.
-+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
-+dnl contains two or three consecutive elements that belong together.
-+AC_DEFUN([AC_LIB_APPENDTOVAR],
-+[
-+ for element in [$2]; do
-+ haveit=
-+ for x in $[$1]; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ if test "X$x" = "X$element"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ [$1]="${[$1]}${[$1]:+ }$element"
-+ fi
-+ done
-+])
---- lrzsz-0.12.20.safe/m4/lib-prefix.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/lib-prefix.m4 2004-09-12 14:40:34.921662056 -0400
-@@ -0,0 +1,155 @@
-+# lib-prefix.m4 serial 3 (gettext-0.13)
-+dnl Copyright (C) 2001-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Bruno Haible.
-+
-+dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
-+dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
-+dnl require excessive bracketing.
-+ifdef([AC_HELP_STRING],
-+[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
-+[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
-+
-+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
-+dnl to access previously installed libraries. The basic assumption is that
-+dnl a user will want packages to use other packages he previously installed
-+dnl with the same --prefix option.
-+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
-+dnl libraries, but is otherwise very convenient.
-+AC_DEFUN([AC_LIB_PREFIX],
-+[
-+ AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
-+ AC_REQUIRE([AC_PROG_CC])
-+ AC_REQUIRE([AC_CANONICAL_HOST])
-+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
-+ dnl By default, look in $includedir and $libdir.
-+ use_additional=yes
-+ AC_LIB_WITH_FINAL_PREFIX([
-+ eval additional_includedir=\"$includedir\"
-+ eval additional_libdir=\"$libdir\"
-+ ])
-+ AC_LIB_ARG_WITH([lib-prefix],
-+[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
-+ --without-lib-prefix don't search for libraries in includedir and libdir],
-+[
-+ if test "X$withval" = "Xno"; then
-+ use_additional=no
-+ else
-+ if test "X$withval" = "X"; then
-+ AC_LIB_WITH_FINAL_PREFIX([
-+ eval additional_includedir=\"$includedir\"
-+ eval additional_libdir=\"$libdir\"
-+ ])
-+ else
-+ additional_includedir="$withval/include"
-+ additional_libdir="$withval/lib"
-+ fi
-+ fi
-+])
-+ if test $use_additional = yes; then
-+ dnl Potentially add $additional_includedir to $CPPFLAGS.
-+ dnl But don't add it
-+ dnl 1. if it's the standard /usr/include,
-+ dnl 2. if it's already present in $CPPFLAGS,
-+ dnl 3. if it's /usr/local/include and we are using GCC on Linux,
-+ dnl 4. if it doesn't exist as a directory.
-+ if test "X$additional_includedir" != "X/usr/include"; then
-+ haveit=
-+ for x in $CPPFLAGS; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ if test "X$x" = "X-I$additional_includedir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ if test "X$additional_includedir" = "X/usr/local/include"; then
-+ if test -n "$GCC"; then
-+ case $host_os in
-+ linux*) haveit=yes;;
-+ esac
-+ fi
-+ fi
-+ if test -z "$haveit"; then
-+ if test -d "$additional_includedir"; then
-+ dnl Really add $additional_includedir to $CPPFLAGS.
-+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
-+ fi
-+ fi
-+ fi
-+ fi
-+ dnl Potentially add $additional_libdir to $LDFLAGS.
-+ dnl But don't add it
-+ dnl 1. if it's the standard /usr/lib,
-+ dnl 2. if it's already present in $LDFLAGS,
-+ dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
-+ dnl 4. if it doesn't exist as a directory.
-+ if test "X$additional_libdir" != "X/usr/lib"; then
-+ haveit=
-+ for x in $LDFLAGS; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ if test "X$x" = "X-L$additional_libdir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ if test "X$additional_libdir" = "X/usr/local/lib"; then
-+ if test -n "$GCC"; then
-+ case $host_os in
-+ linux*) haveit=yes;;
-+ esac
-+ fi
-+ fi
-+ if test -z "$haveit"; then
-+ if test -d "$additional_libdir"; then
-+ dnl Really add $additional_libdir to $LDFLAGS.
-+ LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
-+ fi
-+ fi
-+ fi
-+ fi
-+ fi
-+])
-+
-+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
-+dnl acl_final_exec_prefix, containing the values to which $prefix and
-+dnl $exec_prefix will expand at the end of the configure script.
-+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
-+[
-+ dnl Unfortunately, prefix and exec_prefix get only finally determined
-+ dnl at the end of configure.
-+ if test "X$prefix" = "XNONE"; then
-+ acl_final_prefix="$ac_default_prefix"
-+ else
-+ acl_final_prefix="$prefix"
-+ fi
-+ if test "X$exec_prefix" = "XNONE"; then
-+ acl_final_exec_prefix='${prefix}'
-+ else
-+ acl_final_exec_prefix="$exec_prefix"
-+ fi
-+ acl_save_prefix="$prefix"
-+ prefix="$acl_final_prefix"
-+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
-+ prefix="$acl_save_prefix"
-+])
-+
-+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
-+dnl variables prefix and exec_prefix bound to the values they will have
-+dnl at the end of the configure script.
-+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
-+[
-+ acl_save_prefix="$prefix"
-+ prefix="$acl_final_prefix"
-+ acl_save_exec_prefix="$exec_prefix"
-+ exec_prefix="$acl_final_exec_prefix"
-+ $1
-+ exec_prefix="$acl_save_exec_prefix"
-+ prefix="$acl_save_prefix"
-+])
---- lrzsz-0.12.20.safe/m4/longdouble.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/longdouble.m4 2004-09-12 14:40:34.942658864 -0400
-@@ -0,0 +1,30 @@
-+# longdouble.m4 serial 1 (gettext-0.12)
-+dnl Copyright (C) 2002-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Bruno Haible.
-+dnl Test whether the compiler supports the 'long double' type.
-+dnl Prerequisite: AC_PROG_CC
-+
-+AC_DEFUN([gt_TYPE_LONGDOUBLE],
-+[
-+ AC_CACHE_CHECK([for long double], gt_cv_c_long_double,
-+ [if test "$GCC" = yes; then
-+ gt_cv_c_long_double=yes
-+ else
-+ AC_TRY_COMPILE([
-+ /* The Stardent Vistra knows sizeof(long double), but does not support it. */
-+ long double foo = 0.0;
-+ /* On Ultrix 4.3 cc, long double is 4 and double is 8. */
-+ int array [2*(sizeof(long double) >= sizeof(double)) - 1];
-+ ], ,
-+ gt_cv_c_long_double=yes, gt_cv_c_long_double=no)
-+ fi])
-+ if test $gt_cv_c_long_double = yes; then
-+ AC_DEFINE(HAVE_LONG_DOUBLE, 1, [Define if you have the 'long double' type.])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/longlong.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/longlong.m4 2004-09-12 14:40:34.949657800 -0400
-@@ -0,0 +1,25 @@
-+# longlong.m4 serial 4
-+dnl Copyright (C) 1999-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Paul Eggert.
-+
-+# Define HAVE_LONG_LONG if 'long long' works.
-+
-+AC_DEFUN([jm_AC_TYPE_LONG_LONG],
-+[
-+ AC_CACHE_CHECK([for long long], ac_cv_type_long_long,
-+ [AC_TRY_LINK([long long ll = 1LL; int i = 63;],
-+ [long long llmax = (long long) -1;
-+ return ll << i | ll >> i | llmax / ll | llmax % ll;],
-+ ac_cv_type_long_long=yes,
-+ ac_cv_type_long_long=no)])
-+ if test $ac_cv_type_long_long = yes; then
-+ AC_DEFINE(HAVE_LONG_LONG, 1,
-+ [Define if you have the 'long long' type.])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/Makefile.am 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/Makefile.am 2004-09-12 14:40:35.048642752 -0400
-@@ -0,0 +1 @@
-+EXTRA_DIST = codeset.m4 gettext.m4 glibc21.m4 iconv.m4 intdiv0.m4 intmax.m4 inttypes.m4 inttypes_h.m4 inttypes-pri.m4 isc-posix.m4 lcmessage.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 longdouble.m4 longlong.m4 nls.m4 po.m4 printf-posix.m4 progtest.m4 signed.m4 size_max.m4 stdint_h.m4 uintmax_t.m4 ulonglong.m4 wchar_t.m4 wint_t.m4 xsize.m4
---- lrzsz-0.12.20.safe/m4/nls.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/nls.m4 2004-09-12 14:40:34.955656888 -0400
-@@ -0,0 +1,49 @@
-+# nls.m4 serial 1 (gettext-0.12)
-+dnl Copyright (C) 1995-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+dnl
-+dnl This file can can be used in projects which are not available under
-+dnl the GNU General Public License or the GNU Library General Public
-+dnl License but which still want to provide support for the GNU gettext
-+dnl functionality.
-+dnl Please note that the actual code of the GNU gettext library is covered
-+dnl by the GNU Library General Public License, and the rest of the GNU
-+dnl gettext package package is covered by the GNU General Public License.
-+dnl They are *not* in the public domain.
-+
-+dnl Authors:
-+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-+
-+AC_DEFUN([AM_NLS],
-+[
-+ AC_MSG_CHECKING([whether NLS is requested])
-+ dnl Default is enabled NLS
-+ AC_ARG_ENABLE(nls,
-+ [ --disable-nls do not use Native Language Support],
-+ USE_NLS=$enableval, USE_NLS=yes)
-+ AC_MSG_RESULT($USE_NLS)
-+ AC_SUBST(USE_NLS)
-+])
-+
-+AC_DEFUN([AM_MKINSTALLDIRS],
-+[
-+ dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
-+ dnl find the mkinstalldirs script in another subdir but $(top_srcdir).
-+ dnl Try to locate it.
-+ MKINSTALLDIRS=
-+ if test -n "$ac_aux_dir"; then
-+ case "$ac_aux_dir" in
-+ /*) MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ;;
-+ *) MKINSTALLDIRS="\$(top_builddir)/$ac_aux_dir/mkinstalldirs" ;;
-+ esac
-+ fi
-+ if test -z "$MKINSTALLDIRS"; then
-+ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
-+ fi
-+ AC_SUBST(MKINSTALLDIRS)
-+])
---- lrzsz-0.12.20.safe/m4/po.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/po.m4 2004-09-12 14:40:34.961655976 -0400
-@@ -0,0 +1,426 @@
-+# po.m4 serial 3 (gettext-0.14)
-+dnl Copyright (C) 1995-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+dnl
-+dnl This file can can be used in projects which are not available under
-+dnl the GNU General Public License or the GNU Library General Public
-+dnl License but which still want to provide support for the GNU gettext
-+dnl functionality.
-+dnl Please note that the actual code of the GNU gettext library is covered
-+dnl by the GNU Library General Public License, and the rest of the GNU
-+dnl gettext package package is covered by the GNU General Public License.
-+dnl They are *not* in the public domain.
-+
-+dnl Authors:
-+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-+
-+dnl Checks for all prerequisites of the po subdirectory.
-+AC_DEFUN([AM_PO_SUBDIRS],
-+[
-+ AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-+ AC_REQUIRE([AC_PROG_INSTALL])dnl
-+ AC_REQUIRE([AM_MKINSTALLDIRS])dnl
-+ AC_REQUIRE([AM_NLS])dnl
-+
-+ dnl Perform the following tests also if --disable-nls has been given,
-+ dnl because they are needed for "make dist" to work.
-+
-+ dnl Search for GNU msgfmt in the PATH.
-+ dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
-+ dnl The second test excludes FreeBSD msgfmt.
-+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-+ [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 &&
-+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
-+ :)
-+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-+
-+ dnl Search for GNU xgettext 0.12 or newer in the PATH.
-+ dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
-+ dnl The second test excludes FreeBSD xgettext.
-+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-+ [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 &&
-+ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
-+ :)
-+ dnl Remove leftover from FreeBSD xgettext call.
-+ rm -f messages.po
-+
-+ dnl Search for GNU msgmerge 0.11 or newer in the PATH.
-+ AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
-+ [$ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1], :)
-+
-+ dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
-+ dnl Test whether we really found GNU msgfmt.
-+ if test "$GMSGFMT" != ":"; then
-+ dnl If it is no GNU msgfmt we define it as : so that the
-+ dnl Makefiles still can work.
-+ if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 &&
-+ (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
-+ : ;
-+ else
-+ GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'`
-+ AC_MSG_RESULT(
-+ [found $GMSGFMT program is not GNU msgfmt; ignore it])
-+ GMSGFMT=":"
-+ fi
-+ fi
-+
-+ dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
-+ dnl Test whether we really found GNU xgettext.
-+ if test "$XGETTEXT" != ":"; then
-+ dnl If it is no GNU xgettext we define it as : so that the
-+ dnl Makefiles still can work.
-+ if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 &&
-+ (if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
-+ : ;
-+ else
-+ AC_MSG_RESULT(
-+ [found xgettext program is not GNU xgettext; ignore it])
-+ XGETTEXT=":"
-+ fi
-+ dnl Remove leftover from FreeBSD xgettext call.
-+ rm -f messages.po
-+ fi
-+
-+ AC_OUTPUT_COMMANDS([
-+ for ac_file in $CONFIG_FILES; do
-+ # Support "outfile[:infile[:infile...]]"
-+ case "$ac_file" in
-+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-+ esac
-+ # PO directories have a Makefile.in generated from Makefile.in.in.
-+ case "$ac_file" in */Makefile.in)
-+ # Adjust a relative srcdir.
-+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
-+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
-+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
-+ # In autoconf-2.13 it is called $ac_given_srcdir.
-+ # In autoconf-2.50 it is called $srcdir.
-+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
-+ case "$ac_given_srcdir" in
-+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
-+ /*) top_srcdir="$ac_given_srcdir" ;;
-+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
-+ esac
-+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
-+ rm -f "$ac_dir/POTFILES"
-+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
-+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
-+ POMAKEFILEDEPS="POTFILES.in"
-+ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
-+ # on $ac_dir but don't depend on user-specified configuration
-+ # parameters.
-+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
-+ # The LINGUAS file contains the set of available languages.
-+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
-+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
-+ fi
-+ ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"`
-+ # Hide the ALL_LINGUAS assigment from automake.
-+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
-+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
-+ else
-+ # The set of available languages was given in configure.in.
-+ eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
-+ fi
-+ # Compute POFILES
-+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
-+ # Compute UPDATEPOFILES
-+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
-+ # Compute DUMMYPOFILES
-+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
-+ # Compute GMOFILES
-+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
-+ case "$ac_given_srcdir" in
-+ .) srcdirpre= ;;
-+ *) srcdirpre='$(srcdir)/' ;;
-+ esac
-+ POFILES=
-+ UPDATEPOFILES=
-+ DUMMYPOFILES=
-+ GMOFILES=
-+ for lang in $ALL_LINGUAS; do
-+ POFILES="$POFILES $srcdirpre$lang.po"
-+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
-+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
-+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
-+ done
-+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
-+ # environment variable.
-+ INST_LINGUAS=
-+ if test -n "$ALL_LINGUAS"; then
-+ for presentlang in $ALL_LINGUAS; do
-+ useit=no
-+ if test "%UNSET%" != "$LINGUAS"; then
-+ desiredlanguages="$LINGUAS"
-+ else
-+ desiredlanguages="$ALL_LINGUAS"
-+ fi
-+ for desiredlang in $desiredlanguages; do
-+ # Use the presentlang catalog if desiredlang is
-+ # a. equal to presentlang, or
-+ # b. a variant of presentlang (because in this case,
-+ # presentlang can be used as a fallback for messages
-+ # which are not translated in the desiredlang catalog).
-+ case "$desiredlang" in
-+ "$presentlang"*) useit=yes;;
-+ esac
-+ done
-+ if test $useit = yes; then
-+ INST_LINGUAS="$INST_LINGUAS $presentlang"
-+ fi
-+ done
-+ fi
-+ CATALOGS=
-+ if test -n "$INST_LINGUAS"; then
-+ for lang in $INST_LINGUAS; do
-+ CATALOGS="$CATALOGS $lang.gmo"
-+ done
-+ fi
-+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
-+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
-+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
-+ if test -f "$f"; then
-+ case "$f" in
-+ *.orig | *.bak | *~) ;;
-+ *) cat "$f" >> "$ac_dir/Makefile" ;;
-+ esac
-+ fi
-+ done
-+ fi
-+ ;;
-+ esac
-+ done],
-+ [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
-+ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
-+ # from automake.
-+ eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
-+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
-+ LINGUAS="${LINGUAS-%UNSET%}"
-+ ])
-+])
-+
-+dnl Postprocesses a Makefile in a directory containing PO files.
-+AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
-+[
-+ # When this code is run, in config.status, two variables have already been
-+ # set:
-+ # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
-+ # - LINGUAS is the value of the environment variable LINGUAS at configure
-+ # time.
-+
-+changequote(,)dnl
-+ # Adjust a relative srcdir.
-+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
-+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
-+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
-+ # In autoconf-2.13 it is called $ac_given_srcdir.
-+ # In autoconf-2.50 it is called $srcdir.
-+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
-+ case "$ac_given_srcdir" in
-+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
-+ /*) top_srcdir="$ac_given_srcdir" ;;
-+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
-+ esac
-+
-+ # Find a way to echo strings without interpreting backslash.
-+ if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
-+ gt_echo='echo'
-+ else
-+ if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
-+ gt_echo='printf %s\n'
-+ else
-+ echo_func () {
-+ cat <<EOT
-+$*
-+EOT
-+ }
-+ gt_echo='echo_func'
-+ fi
-+ fi
-+
-+ # A sed script that extracts the value of VARIABLE from a Makefile.
-+ sed_x_variable='
-+# Test if the hold space is empty.
-+x
-+s/P/P/
-+x
-+ta
-+# Yes it was empty. Look if we have the expected variable definition.
-+/^[ ]*VARIABLE[ ]*=/{
-+ # Seen the first line of the variable definition.
-+ s/^[ ]*VARIABLE[ ]*=//
-+ ba
-+}
-+bd
-+:a
-+# Here we are processing a line from the variable definition.
-+# Remove comment, more precisely replace it with a space.
-+s/#.*$/ /
-+# See if the line ends in a backslash.
-+tb
-+:b
-+s/\\$//
-+# Print the line, without the trailing backslash.
-+p
-+tc
-+# There was no trailing backslash. The end of the variable definition is
-+# reached. Clear the hold space.
-+s/^.*$//
-+x
-+bd
-+:c
-+# A trailing backslash means that the variable definition continues in the
-+# next line. Put a nonempty string into the hold space to indicate this.
-+s/^.*$/P/
-+x
-+:d
-+'
-+changequote([,])dnl
-+
-+ # Set POTFILES to the value of the Makefile variable POTFILES.
-+ sed_x_POTFILES="`$gt_echo \"$sed_x_variable\" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`"
-+ POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
-+ # Compute POTFILES_DEPS as
-+ # $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
-+ POTFILES_DEPS=
-+ for file in $POTFILES; do
-+ POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
-+ done
-+ POMAKEFILEDEPS=""
-+
-+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
-+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
-+ fi
-+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
-+ # The LINGUAS file contains the set of available languages.
-+ ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"`
-+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
-+ else
-+ # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
-+ sed_x_LINGUAS="`$gt_echo \"$sed_x_variable\" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`"
-+ ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
-+ fi
-+ # Hide the ALL_LINGUAS assigment from automake.
-+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
-+ # Compute POFILES
-+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
-+ # Compute UPDATEPOFILES
-+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
-+ # Compute DUMMYPOFILES
-+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
-+ # Compute GMOFILES
-+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
-+ # Compute PROPERTIESFILES
-+ # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
-+ # Compute CLASSFILES
-+ # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
-+ # Compute QMFILES
-+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
-+ # Compute MSGFILES
-+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
-+ # Compute RESOURCESDLLFILES
-+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
-+ case "$ac_given_srcdir" in
-+ .) srcdirpre= ;;
-+ *) srcdirpre='$(srcdir)/' ;;
-+ esac
-+ POFILES=
-+ UPDATEPOFILES=
-+ DUMMYPOFILES=
-+ GMOFILES=
-+ PROPERTIESFILES=
-+ CLASSFILES=
-+ QMFILES=
-+ MSGFILES=
-+ RESOURCESDLLFILES=
-+ for lang in $ALL_LINGUAS; do
-+ POFILES="$POFILES $srcdirpre$lang.po"
-+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
-+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
-+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
-+ PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
-+ CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
-+ QMFILES="$QMFILES $srcdirpre$lang.qm"
-+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
-+ MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
-+ frobbedlang=`echo $lang | sed -e 's/_/-/g'`
-+ RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
-+ done
-+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
-+ # environment variable.
-+ INST_LINGUAS=
-+ if test -n "$ALL_LINGUAS"; then
-+ for presentlang in $ALL_LINGUAS; do
-+ useit=no
-+ if test "%UNSET%" != "$LINGUAS"; then
-+ desiredlanguages="$LINGUAS"
-+ else
-+ desiredlanguages="$ALL_LINGUAS"
-+ fi
-+ for desiredlang in $desiredlanguages; do
-+ # Use the presentlang catalog if desiredlang is
-+ # a. equal to presentlang, or
-+ # b. a variant of presentlang (because in this case,
-+ # presentlang can be used as a fallback for messages
-+ # which are not translated in the desiredlang catalog).
-+ case "$desiredlang" in
-+ "$presentlang"*) useit=yes;;
-+ esac
-+ done
-+ if test $useit = yes; then
-+ INST_LINGUAS="$INST_LINGUAS $presentlang"
-+ fi
-+ done
-+ fi
-+ CATALOGS=
-+ JAVACATALOGS=
-+ QTCATALOGS=
-+ TCLCATALOGS=
-+ CSHARPCATALOGS=
-+ if test -n "$INST_LINGUAS"; then
-+ for lang in $INST_LINGUAS; do
-+ CATALOGS="$CATALOGS $lang.gmo"
-+ JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
-+ QTCATALOGS="$QTCATALOGS $lang.qm"
-+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
-+ TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
-+ frobbedlang=`echo $lang | sed -e 's/_/-/g'`
-+ CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
-+ done
-+ fi
-+
-+ sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
-+ if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
-+ # Add dependencies that cannot be formulated as a simple suffix rule.
-+ for lang in $ALL_LINGUAS; do
-+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
-+ cat >> "$ac_file.tmp" <<EOF
-+$frobbedlang.msg: $lang.po
-+ @echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
-+ \$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
-+EOF
-+ done
-+ fi
-+ if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
-+ # Add dependencies that cannot be formulated as a simple suffix rule.
-+ for lang in $ALL_LINGUAS; do
-+ frobbedlang=`echo $lang | sed -e 's/_/-/g'`
-+ cat >> "$ac_file.tmp" <<EOF
-+$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
-+ @echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
-+ \$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
-+EOF
-+ done
-+ fi
-+ if test -n "$POMAKEFILEDEPS"; then
-+ cat >> "$ac_file.tmp" <<EOF
-+Makefile: $POMAKEFILEDEPS
-+EOF
-+ fi
-+ mv "$ac_file.tmp" "$ac_file"
-+])
---- lrzsz-0.12.20.safe/m4/printf-posix.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/printf-posix.m4 2004-09-12 14:40:34.974654000 -0400
-@@ -0,0 +1,46 @@
-+# printf-posix.m4 serial 2 (gettext-0.13.1)
-+dnl Copyright (C) 2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Bruno Haible.
-+dnl Test whether the printf() function supports POSIX/XSI format strings with
-+dnl positions.
-+
-+AC_DEFUN([gt_PRINTF_POSIX],
-+[
-+ AC_REQUIRE([AC_PROG_CC])
-+ AC_CACHE_CHECK([whether printf() supports POSIX/XSI format strings],
-+ gt_cv_func_printf_posix,
-+ [
-+ AC_TRY_RUN([
-+#include <stdio.h>
-+#include <string.h>
-+/* The string "%2$d %1$d", with dollar characters protected from the shell's
-+ dollar expansion (possibly an autoconf bug). */
-+static char format[] = { '%', '2', '$', 'd', ' ', '%', '1', '$', 'd', '\0' };
-+static char buf[100];
-+int main ()
-+{
-+ sprintf (buf, format, 33, 55);
-+ return (strcmp (buf, "55 33") != 0);
-+}], gt_cv_func_printf_posix=yes, gt_cv_func_printf_posix=no,
-+ [
-+ AC_EGREP_CPP(notposix, [
-+#if defined __NetBSD__ || defined _MSC_VER || defined __MINGW32__ || defined __CYGWIN__
-+ notposix
-+#endif
-+ ], gt_cv_func_printf_posix="guessing no",
-+ gt_cv_func_printf_posix="guessing yes")
-+ ])
-+ ])
-+ case $gt_cv_func_printf_posix in
-+ *yes)
-+ AC_DEFINE(HAVE_POSIX_PRINTF, 1,
-+ [Define if your printf() function supports format strings with positions.])
-+ ;;
-+ esac
-+])
---- lrzsz-0.12.20.safe/m4/progtest.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/progtest.m4 2004-09-12 14:40:34.990651568 -0400
-@@ -0,0 +1,91 @@
-+# progtest.m4 serial 3 (gettext-0.12)
-+dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+dnl
-+dnl This file can can be used in projects which are not available under
-+dnl the GNU General Public License or the GNU Library General Public
-+dnl License but which still want to provide support for the GNU gettext
-+dnl functionality.
-+dnl Please note that the actual code of the GNU gettext library is covered
-+dnl by the GNU Library General Public License, and the rest of the GNU
-+dnl gettext package package is covered by the GNU General Public License.
-+dnl They are *not* in the public domain.
-+
-+dnl Authors:
-+dnl Ulrich Drepper <drepper@cygnus.com>, 1996.
-+
-+# Search path for a program which passes the given test.
-+
-+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
-+[
-+# Prepare PATH_SEPARATOR.
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+# Find out how to test for executable files. Don't use a zero-byte file,
-+# as systems may use methods other than mode bits to determine executability.
-+cat >conf$$.file <<_ASEOF
-+#! /bin/sh
-+exit 0
-+_ASEOF
-+chmod +x conf$$.file
-+if test -x conf$$.file >/dev/null 2>&1; then
-+ ac_executable_p="test -x"
-+else
-+ ac_executable_p="test -f"
-+fi
-+rm -f conf$$.file
-+
-+# Extract the first word of "$2", so it can be a program name with args.
-+set dummy $2; ac_word=[$]2
-+AC_MSG_CHECKING([for $ac_word])
-+AC_CACHE_VAL(ac_cv_path_$1,
-+[case "[$]$1" in
-+ [[\\/]]* | ?:[[\\/]]*)
-+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
-+ ;;
-+ *)
-+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
-+ IFS="$ac_save_IFS"
-+ test -z "$ac_dir" && ac_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
-+ if [$3]; then
-+ ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
-+ break 2
-+ fi
-+ fi
-+ done
-+ done
-+ IFS="$ac_save_IFS"
-+dnl If no 4th arg is given, leave the cache variable unset,
-+dnl so AC_PATH_PROGS will keep looking.
-+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-+])dnl
-+ ;;
-+esac])dnl
-+$1="$ac_cv_path_$1"
-+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
-+ AC_MSG_RESULT([$]$1)
-+else
-+ AC_MSG_RESULT(no)
-+fi
-+AC_SUBST($1)dnl
-+])
---- lrzsz-0.12.20.safe/m4/signed.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/signed.m4 2004-09-12 14:40:34.996650656 -0400
-@@ -0,0 +1,19 @@
-+# signed.m4 serial 1 (gettext-0.10.40)
-+dnl Copyright (C) 2001-2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Bruno Haible.
-+
-+AC_DEFUN([bh_C_SIGNED],
-+[
-+ AC_CACHE_CHECK([for signed], bh_cv_c_signed,
-+ [AC_TRY_COMPILE(, [signed char x;], bh_cv_c_signed=yes, bh_cv_c_signed=no)])
-+ if test $bh_cv_c_signed = no; then
-+ AC_DEFINE(signed, ,
-+ [Define to empty if the C compiler doesn't support this keyword.])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/size_max.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/size_max.m4 2004-09-12 14:40:35.003649592 -0400
-@@ -0,0 +1,61 @@
-+# size_max.m4 serial 2
-+dnl Copyright (C) 2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Bruno Haible.
-+
-+AC_DEFUN([gl_SIZE_MAX],
-+[
-+ AC_CHECK_HEADERS(stdint.h)
-+ dnl First test whether the system already has SIZE_MAX.
-+ AC_MSG_CHECKING([for SIZE_MAX])
-+ result=
-+ AC_EGREP_CPP([Found it], [
-+#include <limits.h>
-+#if HAVE_STDINT_H
-+#include <stdint.h>
-+#endif
-+#ifdef SIZE_MAX
-+Found it
-+#endif
-+], result=yes)
-+ if test -z "$result"; then
-+ dnl Define it ourselves. Here we assume that the type 'size_t' is not wider
-+ dnl than the type 'unsigned long'.
-+ dnl The _AC_COMPUTE_INT macro works up to LONG_MAX, since it uses 'expr',
-+ dnl which is guaranteed to work from LONG_MIN to LONG_MAX.
-+ _AC_COMPUTE_INT([~(size_t)0 / 10], res_hi,
-+ [#include <stddef.h>], result=?)
-+ _AC_COMPUTE_INT([~(size_t)0 % 10], res_lo,
-+ [#include <stddef.h>], result=?)
-+ _AC_COMPUTE_INT([sizeof (size_t) <= sizeof (unsigned int)], fits_in_uint,
-+ [#include <stddef.h>], result=?)
-+ if test "$fits_in_uint" = 1; then
-+ dnl Even though SIZE_MAX fits in an unsigned int, it must be of type
-+ dnl 'unsigned long' if the type 'size_t' is the same as 'unsigned long'.
-+ AC_TRY_COMPILE([#include <stddef.h>
-+ extern size_t foo;
-+ extern unsigned long foo;
-+ ], [], fits_in_uint=0)
-+ fi
-+ if test -z "$result"; then
-+ if test "$fits_in_uint" = 1; then
-+ result="$res_hi$res_lo"U
-+ else
-+ result="$res_hi$res_lo"UL
-+ fi
-+ else
-+ dnl Shouldn't happen, but who knows...
-+ result='~(size_t)0'
-+ fi
-+ fi
-+ AC_MSG_RESULT([$result])
-+ if test "$result" != yes; then
-+ AC_DEFINE_UNQUOTED([SIZE_MAX], [$result],
-+ [Define as the maximum value of type 'size_t', if the system doesn't define it.])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/stdint_h.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/stdint_h.m4 2004-09-12 14:40:35.009648680 -0400
-@@ -0,0 +1,28 @@
-+# stdint_h.m4 serial 3 (gettext-0.12)
-+dnl Copyright (C) 1997-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Paul Eggert.
-+
-+# Define HAVE_STDINT_H_WITH_UINTMAX if <stdint.h> exists,
-+# doesn't clash with <sys/types.h>, and declares uintmax_t.
-+
-+AC_DEFUN([jm_AC_HEADER_STDINT_H],
-+[
-+ AC_CACHE_CHECK([for stdint.h], jm_ac_cv_header_stdint_h,
-+ [AC_TRY_COMPILE(
-+ [#include <sys/types.h>
-+#include <stdint.h>],
-+ [uintmax_t i = (uintmax_t) -1;],
-+ jm_ac_cv_header_stdint_h=yes,
-+ jm_ac_cv_header_stdint_h=no)])
-+ if test $jm_ac_cv_header_stdint_h = yes; then
-+ AC_DEFINE_UNQUOTED(HAVE_STDINT_H_WITH_UINTMAX, 1,
-+ [Define if <stdint.h> exists, doesn't clash with <sys/types.h>,
-+ and declares uintmax_t. ])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/uintmax_t.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/uintmax_t.m4 2004-09-12 14:40:35.021646856 -0400
-@@ -0,0 +1,32 @@
-+# uintmax_t.m4 serial 7 (gettext-0.12)
-+dnl Copyright (C) 1997-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Paul Eggert.
-+
-+AC_PREREQ(2.13)
-+
-+# Define uintmax_t to 'unsigned long' or 'unsigned long long'
-+# if it is not already defined in <stdint.h> or <inttypes.h>.
-+
-+AC_DEFUN([jm_AC_TYPE_UINTMAX_T],
-+[
-+ AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
-+ AC_REQUIRE([jm_AC_HEADER_STDINT_H])
-+ if test $jm_ac_cv_header_inttypes_h = no && test $jm_ac_cv_header_stdint_h = no; then
-+ AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG])
-+ test $ac_cv_type_unsigned_long_long = yes \
-+ && ac_type='unsigned long long' \
-+ || ac_type='unsigned long'
-+ AC_DEFINE_UNQUOTED(uintmax_t, $ac_type,
-+ [Define to unsigned long or unsigned long long
-+ if <stdint.h> and <inttypes.h> don't define.])
-+ else
-+ AC_DEFINE(HAVE_UINTMAX_T, 1,
-+ [Define if you have the 'uintmax_t' type in <stdint.h> or <inttypes.h>.])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/ulonglong.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/ulonglong.m4 2004-09-12 14:40:35.028645792 -0400
-@@ -0,0 +1,25 @@
-+# ulonglong.m4 serial 3
-+dnl Copyright (C) 1999-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Paul Eggert.
-+
-+# Define HAVE_UNSIGNED_LONG_LONG if 'unsigned long long' works.
-+
-+AC_DEFUN([jm_AC_TYPE_UNSIGNED_LONG_LONG],
-+[
-+ AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long,
-+ [AC_TRY_LINK([unsigned long long ull = 1ULL; int i = 63;],
-+ [unsigned long long ullmax = (unsigned long long) -1;
-+ return ull << i | ull >> i | ullmax / ull | ullmax % ull;],
-+ ac_cv_type_unsigned_long_long=yes,
-+ ac_cv_type_unsigned_long_long=no)])
-+ if test $ac_cv_type_unsigned_long_long = yes; then
-+ AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1,
-+ [Define if you have the 'unsigned long long' type.])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/wchar_t.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/wchar_t.m4 2004-09-12 14:40:35.034644880 -0400
-@@ -0,0 +1,22 @@
-+# wchar_t.m4 serial 1 (gettext-0.12)
-+dnl Copyright (C) 2002-2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Bruno Haible.
-+dnl Test whether <stddef.h> has the 'wchar_t' type.
-+dnl Prerequisite: AC_PROG_CC
-+
-+AC_DEFUN([gt_TYPE_WCHAR_T],
-+[
-+ AC_CACHE_CHECK([for wchar_t], gt_cv_c_wchar_t,
-+ [AC_TRY_COMPILE([#include <stddef.h>
-+ wchar_t foo = (wchar_t)'\0';], ,
-+ gt_cv_c_wchar_t=yes, gt_cv_c_wchar_t=no)])
-+ if test $gt_cv_c_wchar_t = yes; then
-+ AC_DEFINE(HAVE_WCHAR_T, 1, [Define if you have the 'wchar_t' type.])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/wint_t.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/wint_t.m4 2004-09-12 14:40:35.040643968 -0400
-@@ -0,0 +1,22 @@
-+# wint_t.m4 serial 1 (gettext-0.12)
-+dnl Copyright (C) 2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Bruno Haible.
-+dnl Test whether <wchar.h> has the 'wint_t' type.
-+dnl Prerequisite: AC_PROG_CC
-+
-+AC_DEFUN([gt_TYPE_WINT_T],
-+[
-+ AC_CACHE_CHECK([for wint_t], gt_cv_c_wint_t,
-+ [AC_TRY_COMPILE([#include <wchar.h>
-+ wint_t foo = (wchar_t)'\0';], ,
-+ gt_cv_c_wint_t=yes, gt_cv_c_wint_t=no)])
-+ if test $gt_cv_c_wint_t = yes; then
-+ AC_DEFINE(HAVE_WINT_T, 1, [Define if you have the 'wint_t' type.])
-+ fi
-+])
---- lrzsz-0.12.20.safe/m4/xsize.m4 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/m4/xsize.m4 2004-09-12 14:40:35.047642904 -0400
-@@ -0,0 +1,14 @@
-+# xsize.m4 serial 2
-+dnl Copyright (C) 2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_XSIZE],
-+[
-+ dnl Prerequisites of lib/xsize.h.
-+ AC_REQUIRE([gl_SIZE_MAX])
-+ AC_CHECK_HEADERS(stdint.h)
-+])
---- lrzsz-0.12.20.safe/Makefile.am 1998-12-30 06:19:40.000000000 -0500
-+++ lrzsz-0.12.20/Makefile.am 2004-09-12 14:40:35.121631656 -0400
-@@ -1,5 +1,5 @@
- SUBDIRS = lib intl src po man testsuite
--EXTRA_DIST = check.lrzsz COMPATABILITY README.cvs README.isdn4linux \
-+EXTRA_DIST = config.rpath check.lrzsz COMPATABILITY README.cvs README.isdn4linux \
- README.gettext rpmrc buildrpm systype.in fastcheck.sh README.tests \
- beos-runpiped.c fastcheck.beos
- noinst_SCRIPTS=systype
-@@ -83,3 +83,5 @@
- rpm: $(PR).tar.gz Specfile
- $(srcdir)/buildrpm $(srcdir)
-
-+
-+ACLOCAL_AMFLAGS = -I m4
---- lrzsz-0.12.20.safe/Makefile.in 1998-12-30 11:31:40.000000000 -0500
-+++ lrzsz-0.12.20/Makefile.in 2004-09-12 14:40:35.109633480 -0400
-@@ -125,7 +125,7 @@
- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
- $(ACLOCAL_M4): configure.in acinclude.m4
-- cd $(srcdir) && $(ACLOCAL)
-+ cd $(srcdir) && $(ACLOCAL) -I m4
-
- config.status: $(srcdir)/configure
- $(SHELL) ./config.status --recheck
---- lrzsz-0.12.20.safe/mkinstalldirs 1998-04-26 09:20:52.000000000 -0400
-+++ lrzsz-0.12.20/mkinstalldirs 2004-09-12 14:40:34.337750824 -0400
-@@ -1,34 +1,150 @@
- #! /bin/sh
- # mkinstalldirs --- make directory hierarchy
--# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-+
-+scriptversion=2004-02-15.20
-+
-+# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
- # Created: 1993-05-16
--# Last modified: 1995-03-05
--# Public domain
-+# Public domain.
-+#
-+# This file is maintained in Automake, please report
-+# bugs to <bug-automake@gnu.org> or send patches to
-+# <automake-patches@gnu.org>.
-
- errstatus=0
-+dirmode=""
-
--for file in ${1+"$@"} ; do
-- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-- shift
-+usage="\
-+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
-
-- pathcomp=
-- for d in ${1+"$@"} ; do
-- pathcomp="$pathcomp$d"
-- case "$pathcomp" in
-- -* ) pathcomp=./$pathcomp ;;
-- esac
-+Create each directory DIR (with mode MODE, if specified), including all
-+leading file name components.
-
-- if test ! -d "$pathcomp"; then
-- echo "mkdir $pathcomp" 1>&2
-- mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
-- fi
-+Report bugs to <bug-automake@gnu.org>."
-
-- if test ! -d "$pathcomp"; then
-+# process command line arguments
-+while test $# -gt 0 ; do
-+ case $1 in
-+ -h | --help | --h*) # -h for help
-+ echo "$usage"
-+ exit 0
-+ ;;
-+ -m) # -m PERM arg
-+ shift
-+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
-+ dirmode=$1
-+ shift
-+ ;;
-+ --version)
-+ echo "$0 $scriptversion"
-+ exit 0
-+ ;;
-+ --) # stop option processing
-+ shift
-+ break
-+ ;;
-+ -*) # unknown option
-+ echo "$usage" 1>&2
-+ exit 1
-+ ;;
-+ *) # first non-opt arg
-+ break
-+ ;;
-+ esac
-+done
-+
-+for file
-+do
-+ if test -d "$file"; then
-+ shift
-+ else
-+ break
-+ fi
-+done
-+
-+case $# in
-+ 0) exit 0 ;;
-+esac
-+
-+# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
-+# mkdir -p a/c at the same time, both will detect that a is missing,
-+# one will create a, then the other will try to create a and die with
-+# a "File exists" error. This is a problem when calling mkinstalldirs
-+# from a parallel make. We use --version in the probe to restrict
-+# ourselves to GNU mkdir, which is thread-safe.
-+case $dirmode in
-+ '')
-+ if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-+ echo "mkdir -p -- $*"
-+ exec mkdir -p -- "$@"
-+ else
-+ # On NextStep and OpenStep, the `mkdir' command does not
-+ # recognize any option. It will interpret all options as
-+ # directories to create, and then abort because `.' already
-+ # exists.
-+ test -d ./-p && rmdir ./-p
-+ test -d ./--version && rmdir ./--version
-+ fi
-+ ;;
-+ *)
-+ if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
-+ test ! -d ./--version; then
-+ echo "mkdir -m $dirmode -p -- $*"
-+ exec mkdir -m "$dirmode" -p -- "$@"
-+ else
-+ # Clean up after NextStep and OpenStep mkdir.
-+ for d in ./-m ./-p ./--version "./$dirmode";
-+ do
-+ test -d $d && rmdir $d
-+ done
-+ fi
-+ ;;
-+esac
-+
-+for file
-+do
-+ set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-+ shift
-+
-+ pathcomp=
-+ for d
-+ do
-+ pathcomp="$pathcomp$d"
-+ case $pathcomp in
-+ -*) pathcomp=./$pathcomp ;;
-+ esac
-+
-+ if test ! -d "$pathcomp"; then
-+ echo "mkdir $pathcomp"
-+
-+ mkdir "$pathcomp" || lasterr=$?
-+
-+ if test ! -d "$pathcomp"; then
- errstatus=$lasterr
-- fi
-+ else
-+ if test ! -z "$dirmode"; then
-+ echo "chmod $dirmode $pathcomp"
-+ lasterr=""
-+ chmod "$dirmode" "$pathcomp" || lasterr=$?
-
-- pathcomp="$pathcomp/"
-- done
-+ if test ! -z "$lasterr"; then
-+ errstatus=$lasterr
-+ fi
-+ fi
-+ fi
-+ fi
-+
-+ pathcomp="$pathcomp/"
-+ done
- done
-
- exit $errstatus
-+
-+# Local Variables:
-+# mode: shell-script
-+# sh-indentation: 2
-+# eval: (add-hook 'write-file-hooks 'time-stamp)
-+# time-stamp-start: "scriptversion="
-+# time-stamp-format: "%:y-%02m-%02d.%02H"
-+# time-stamp-end: "$"
-+# End:
---- lrzsz-0.12.20.safe/po/boldquot.sed 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/po/boldquot.sed 2004-09-12 14:40:34.723692152 -0400
-@@ -0,0 +1,10 @@
-+s/"\([^"]*\)"/“\1â€/g
-+s/`\([^`']*\)'/‘\1’/g
-+s/ '\([^`']*\)' / ‘\1’ /g
-+s/ '\([^`']*\)'$/ ‘\1’/g
-+s/^'\([^`']*\)' /‘\1’ /g
-+s/“â€/""/g
-+s/“/“^[[1m/g
-+s/â€/^[[0mâ€/g
-+s/‘/‘^[[1m/g
-+s/’/^[[0m’/g
---- lrzsz-0.12.20.safe/po/cat-id-tbl.c 1998-12-29 04:24:24.000000000 -0500
-+++ lrzsz-0.12.20/po/cat-id-tbl.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,234 +0,0 @@
--/* Automatically generated by po2tbl.sed from lrzsz.pot. */
--
--#if HAVE_CONFIG_H
--# include <config.h>
--#endif
--
--#include "libgettext.h"
--
--const struct _msg_ent _msg_tbl[] = {
-- {"", 1},
-- {"io_mode(,2) in rbsb.c not implemented\n", 2},
-- {"caught signal %d; exiting", 3},
-- {"command tries", 4},
-- {"packetlength", 5},
-- {"packetlength out of range 24..%ld", 6},
-- {"framelength", 7},
-- {"framelength out of range 32..%ld", 8},
-- {"min_bps", 9},
-- {"min_bps must be >= 0", 10},
-- {"min_bps_time", 11},
-- {"min_bps_time must be > 1", 12},
-- {"hour to large (0..23)", 13},
-- {"unparsable stop time\n", 14},
-- {"minute to large (0..59)", 15},
-- {"stop time to small", 16},
-- {"stop-at", 17},
-- {"timeout", 18},
-- {"timeout out of range 10..1000", 19},
-- {"security violation: can't do that under restricted shell\n", 20},
-- {"window size", 21},
-- {"cannot turnoff syslog", 22},
-- {"startup delay", 23},
-- {"out of memory", 24},
-- {"this program was never intended to be used setuid\n", 25},
-- {"need at least one file to send", 26},
-- {"Can't send command in restricted mode\n", 27},
-- {"hostname too long\n", 28},
-- {"illegal server address\n", 29},
-- {"can read only one file from stdin", 30},
-- {"Transfer incomplete\n", 31},
-- {"Transfer complete\n", 32},
-- {"send_pseudo %s: cannot open tmpfile %s: %s", 33},
-- {"send_pseudo %s: cannot lstat tmpfile %s: %s", 34},
-- {"send_pseudo %s: avoiding symlink trap", 35},
-- {"send_pseudo %s: cannot write to tmpfile %s: %s", 36},
-- {"send_pseudo %s: failed", 37},
-- {"send_pseudo %s: ok", 38},
-- {"tcp protocol init failed\n", 39},
-- {"Answering TIMESYNC at %s", 40},
-- {"timezone", 41},
-- {"timezone unknown", 42},
-- {"Can't open any requested files.", 43},
-- {"security violation: not allowed to upload from %s", 44},
-- {"cannot open %s", 45},
-- {"is not a file: %s", 46},
-- {"%s/%s: error occured", 47},
-- {"skipped: %s", 48},
-- {"%s/%s: skipped", 49},
-- {"Bytes Sent:%7ld BPS:%-8ld \n", 50},
-- {"Sending %s, %ld blocks: ", 51},
-- {"Give your local XMODEM receive command now.", 52},
-- {"Sending: %s\n", 53},
-- {"Timeout on pathname", 54},
-- {"Receiver Cancelled", 55},
-- {"No ACK on EOT", 56},
-- {"Xmodem sectors/kbytes sent: %3d/%2dk", 57},
-- {"Ymodem sectors/kbytes sent: %3d/%2dk", 58},
-- {"Cancelled", 59},
-- {"Timeout on sector ACK", 60},
-- {"NAK on sector", 61},
-- {"Got burst for sector ACK", 62},
-- {"Got %02x for sector ACK", 63},
-- {"Retry Count Exceeded", 64},
-- {"Try `%s --help' for more information.\n", 65},
-- {"%s version %s\n", 66},
-- {"Usage: %s [options] file ...\n", 67},
-- {" or: %s [options] -{c|i} COMMAND\n", 68},
-- {"Send file(s) with ZMODEM/YMODEM/XMODEM protocol\n", 69},
-- {"\
-- (X) = option applies to XMODEM only\n\
-- (Y) = option applies to YMODEM only\n\
-- (Z) = option applies to ZMODEM only\n", 70},
-- {"\
-- -+, --append append to existing destination file (Z)\n\
-- -2, --twostop use 2 stop bits\n\
-- -4, --try-4k go up to 4K blocksize\n\
-- --start-4k start with 4K blocksize (doesn't try 8)\n\
-- -8, --try-8k go up to 8K blocksize\n\
-- --start-8k start with 8K blocksize\n\
-- -a, --ascii ASCII transfer (change CR/LF to LF)\n\
-- -b, --binary binary transfer\n\
-- -B, --bufsize N buffer N bytes (N==auto: buffer whole file)\n\
-- -c, --command COMMAND execute remote command COMMAND (Z)\n\
-- -C, --command-tries N try N times to execute a command (Z)\n\
-- -d, --dot-to-slash change '.' to '/' in pathnames (Y/Z)\n\
-- --delay-startup N sleep N seconds before doing anything\n\
-- -e, --escape escape all control characters (Z)\n\
-- -E, --rename force receiver to rename files it already has\n\
-- -f, --full-path send full pathname (Y/Z)\n\
-- -i, --immediate-command CMD send remote CMD, return immediately (Z)\n\
-- -h, --help print this usage message\n\
-- -k, --1k send 1024 byte packets (X)\n\
-- -L, --packetlen N limit subpacket length to N bytes (Z)\n\
-- -l, --framelen N limit frame length to N bytes (l>=L) (Z)\n\
-- -m, --min-bps N stop transmission if BPS below N\n\
-- -M, --min-bps-time N for at least N seconds (default: 120)\n", 71},
-- {"\
-- -n, --newer send file if source newer (Z)\n\
-- -N, --newer-or-longer send file if source newer or longer (Z)\n\
-- -o, --16-bit-crc use 16 bit CRC instead of 32 bit CRC (Z)\n\
-- -O, --disable-timeouts disable timeout code, wait forever\n\
-- -p, --protect protect existing destination file (Z)\n\
-- -r, --resume resume interrupted file transfer (Z)\n\
-- -R, --restricted restricted, more secure mode\n\
-- -q, --quiet quiet (no progress reports)\n\
-- -s, --stop-at {HH:MM|+N} stop transmission at HH:MM or in N seconds\n\
-- --tcp build a TCP connection to transmit files\n\
-- --tcp-server open socket, wait for connection\n\
-- -u, --unlink unlink file after transmission\n\
-- -U, --unrestrict turn off restricted mode (if allowed to)\n\
-- -v, --verbose be verbose, provide debugging information\n\
-- -w, --windowsize N Window is N bytes (Z)\n\
-- -X, --xmodem use XMODEM protocol\n\
-- -y, --overwrite overwrite existing files\n\
-- -Y, --overwrite-or-skip overwrite existing files, else skip\n\
-- --ymodem use YMODEM protocol\n\
-- -Z, --zmodem use ZMODEM protocol\n\
--\n\
--short options use the same arguments as the long ones\n", 72},
-- {"got ZRQINIT", 73},
-- {"got ZCAN", 74},
-- {"blklen now %d\n", 75},
-- {"zsendfdata: bps rate %ld below min %ld", 76},
-- {"zsendfdata: reached stop time", 77},
-- {"Bytes Sent:%7ld/%7ld BPS:%-8ld ETA %02d:%02d ", 78},
-- {"calc_blklen: reduced to %d due to error\n", 79},
-- {"calc_blklen: returned old value %d due to low bpe diff\n", 80},
-- {"calc_blklen: old %ld, new %ld, d %ld\n", 81},
-- {"calc_blklen: calc total_bytes=%ld, bpe=%ld, ec=%ld\n", 82},
-- {"calc_blklen: blklen %d, ok %ld, failed %ld -> %lu\n", 83},
-- {"calc_blklen: returned %d as best\n", 84},
-- {"\
--\n\
--countem: Total %d %ld\n", 85},
-- {"Bad escape sequence %x", 86},
-- {"Sender Canceled", 87},
-- {"TIMEOUT", 88},
-- {"Bad data subpacket", 89},
-- {"Data subpacket too long", 90},
-- {"Garbage count exceeded", 91},
-- {"Got %s", 92},
-- {"Retry %d: ", 93},
-- {"don't have settimeofday, will not set time\n", 94},
-- {"not running as root (this is good!), can not set time\n", 95},
-- {"bytes_per_error", 96},
-- {"bytes-per-error should be >100", 97},
-- {"O_SYNC not supported by the kernel", 98},
-- {"garbage on commandline", 99},
-- {"Usage: %s [options] [filename.if.xmodem]\n", 100},
-- {"Receive files with ZMODEM/YMODEM/XMODEM protocol\n", 101},
-- {"\
-- -+, --append append to existing files\n\
-- -a, --ascii ASCII transfer (change CR/LF to LF)\n\
-- -b, --binary binary transfer\n\
-- -B, --bufsize N buffer N bytes (N==auto: buffer whole file)\n\
-- -c, --with-crc Use 16 bit CRC (X)\n\
-- -C, --allow-remote-commands allow execution of remote commands (Z)\n\
-- -D, --null write all received data to /dev/null\n\
-- --delay-startup N sleep N seconds before doing anything\n\
-- -e, --escape Escape control characters (Z)\n\
-- -E, --rename rename any files already existing\n\
-- --errors N generate CRC error every N bytes (debugging)\n\
-- -h, --help Help, print this usage message\n\
-- -m, --min-bps N stop transmission if BPS below N\n\
-- -M, --min-bps-time N for at least N seconds (default: 120)\n\
-- -O, --disable-timeouts disable timeout code, wait forever for data\n\
-- --o-sync open output file(s) in synchronous write mode\n\
-- -p, --protect protect existing files\n\
-- -q, --quiet quiet, no progress reports\n\
-- -r, --resume try to resume interrupted file transfer (Z)\n\
-- -R, --restricted restricted, more secure mode\n\
-- -s, --stop-at {HH:MM|+N} stop transmission at HH:MM or in N seconds\n\
-- -S, --timesync request remote time (twice: set local time)\n\
-- --syslog[=off] turn syslog on or off, if possible\n\
-- -t, --timeout N set timeout to N tenths of a second\n\
-- -u, --keep-uppercase keep upper case filenames\n\
-- -U, --unrestrict disable restricted mode (if allowed to)\n\
-- -v, --verbose be verbose, provide debugging information\n\
-- -w, --windowsize N Window is N bytes (Z)\n\
-- -X --xmodem use XMODEM protocol\n\
-- -y, --overwrite Yes, clobber existing file if any\n\
-- --ymodem use YMODEM protocol\n\
-- -Z, --zmodem use ZMODEM protocol\n\
--\n\
--short options use the same arguments as the long ones\n", 102},
-- {"%s waiting to receive.", 103},
-- {"\rBytes received: %7ld/%7ld BPS:%-6ld \r\n", 104},
-- {"%s: ready to receive %s", 105},
-- {"\rBytes received: %7ld BPS:%-6ld \r\n", 106},
-- {"\
--\r\n\
--%s: %s removed.\r\n", 107},
-- {"Pathname fetch returned EOT", 108},
-- {"Received dup Sector", 109},
-- {"Sync Error", 110},
-- {"CRC", 111},
-- {"Checksum", 112},
-- {"Sector number garbled", 113},
-- {"Sender Cancelled", 114},
-- {"Got 0%o sector header", 115},
-- {"file name ends with a /, skipped: %s\n", 116},
-- {"zmanag=%d, Lzmanag=%d\n", 117},
-- {"zconv=%d\n", 118},
-- {"file exists, skipped: %s\n", 119},
-- {"TIMESYNC: here %ld, remote %ld, diff %ld seconds\n", 120},
-- {"TIMESYNC: cannot set time: %s\n", 121},
-- {"cannot tmpfile() for tcp protocol synchronization", 122},
-- {"Topipe", 123},
-- {"Receiving: %s\n", 124},
-- {"Blocks received: %d", 125},
-- {"%s: %s exists\n", 126},
-- {"%s:\tSecurity Violation", 127},
-- {"remote command execution requested", 128},
-- {"not executed", 129},
-- {"got ZRINIT", 130},
-- {"Skipped", 131},
-- {"rzfile: bps rate %ld below min %ld", 132},
-- {"rzfile: reached stop time", 133},
-- {"\rBytes received: %7ld/%7ld BPS:%-6ld ETA %02d:%02d ", 134},
-- {"fgets for tcp protocol synchronization failed: ", 135},
-- {"file close error", 136},
--};
--
--int _msg_tbl_length = 136;
---- lrzsz-0.12.20.safe/po/ChangeLog 1998-04-26 09:20:52.000000000 -0400
-+++ lrzsz-0.12.20/po/ChangeLog 2004-09-12 14:40:34.793681512 -0400
-@@ -1,3 +1,15 @@
-+2004-09-12 gettextize <bug-gnu-gettext@gnu.org>
-+
-+ * boldquot.sed: New file, from gettext-0.14.1.
-+ * en@boldquot.header: New file, from gettext-0.14.1.
-+ * en@quot.header: New file, from gettext-0.14.1.
-+ * insert-header.sin: New file, from gettext-0.14.1.
-+ * quot.sed: New file, from gettext-0.14.1.
-+ * remove-potcdate.sin: New file, from gettext-0.14.1.
-+ * Rules-quot: New file, from gettext-0.14.1.
-+ * cat-id-tbl.c: Remove file.
-+ * stamp-cat-id: Remove file.
-+
- /* Automatically generated by po2tbl.sed from lrzsz.pot. */
-
- #if HAVE_CONFIG_H
---- lrzsz-0.12.20.safe/po/en@boldquot.header 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/po/en@boldquot.header 2004-09-12 14:40:34.731690936 -0400
-@@ -0,0 +1,25 @@
-+# All this catalog "translates" are quotation characters.
-+# The msgids must be ASCII and therefore cannot contain real quotation
-+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
-+# and double quote (0x22). These substitutes look strange; see
-+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
-+#
-+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
-+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
-+# It also translates pairs of apostrophe (0x27) to
-+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
-+# and pairs of quotation mark (0x22) to
-+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
-+#
-+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
-+# When output to an ISO-8859-1 terminal, the single quotation marks are
-+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
-+# grave/acute accent (by libiconv), and the double quotation marks are
-+# transliterated to 0x22.
-+# When output to an ASCII terminal, the single quotation marks are
-+# transliterated to apostrophes, and the double quotation marks are
-+# transliterated to 0x22.
-+#
-+# This catalog furthermore displays the text between the quotation marks in
-+# bold face, assuming the VT100/XTerm escape sequences.
-+#
---- lrzsz-0.12.20.safe/po/en@quot.header 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/po/en@quot.header 2004-09-12 14:40:34.737690024 -0400
-@@ -0,0 +1,22 @@
-+# All this catalog "translates" are quotation characters.
-+# The msgids must be ASCII and therefore cannot contain real quotation
-+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
-+# and double quote (0x22). These substitutes look strange; see
-+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
-+#
-+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
-+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
-+# It also translates pairs of apostrophe (0x27) to
-+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
-+# and pairs of quotation mark (0x22) to
-+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
-+#
-+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
-+# When output to an ISO-8859-1 terminal, the single quotation marks are
-+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
-+# grave/acute accent (by libiconv), and the double quotation marks are
-+# transliterated to 0x22.
-+# When output to an ASCII terminal, the single quotation marks are
-+# transliterated to apostrophes, and the double quotation marks are
-+# transliterated to 0x22.
-+#
---- lrzsz-0.12.20.safe/po/insert-header.sin 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/po/insert-header.sin 2004-09-12 14:40:34.743689112 -0400
-@@ -0,0 +1,23 @@
-+# Sed script that inserts the file called HEADER before the header entry.
-+#
-+# At each occurrence of a line starting with "msgid ", we execute the following
-+# commands. At the first occurrence, insert the file. At the following
-+# occurrences, do nothing. The distinction between the first and the following
-+# occurrences is achieved by looking at the hold space.
-+/^msgid /{
-+x
-+# Test if the hold space is empty.
-+s/m/m/
-+ta
-+# Yes it was empty. First occurrence. Read the file.
-+r HEADER
-+# Output the file's contents by reading the next line. But don't lose the
-+# current line while doing this.
-+g
-+N
-+bb
-+:a
-+# The hold space was nonempty. Following occurrences. Do nothing.
-+x
-+:b
-+}
---- lrzsz-0.12.20.safe/po/Makevars 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/po/Makevars 2004-09-12 14:40:34.748688352 -0400
-@@ -0,0 +1,41 @@
-+# Makefile variables for PO directory in any package using GNU gettext.
-+
-+# Usually the message domain is the same as the package name.
-+DOMAIN = $(PACKAGE)
-+
-+# These two variables depend on the location of this directory.
-+subdir = po
-+top_builddir = ..
-+
-+# These options get passed to xgettext.
-+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
-+
-+# This is the copyright holder that gets inserted into the header of the
-+# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
-+# package. (Note that the msgstr strings, extracted from the package's
-+# sources, belong to the copyright holder of the package.) Translators are
-+# expected to transfer the copyright for their translations to this person
-+# or entity, or to disclaim their copyright. The empty string stands for
-+# the public domain; in this case the translators are expected to disclaim
-+# their copyright.
-+COPYRIGHT_HOLDER = Free Software Foundation, Inc.
-+
-+# This is the email address or URL to which the translators shall report
-+# bugs in the untranslated strings:
-+# - Strings which are not entire sentences, see the maintainer guidelines
-+# in the GNU gettext documentation, section 'Preparing Strings'.
-+# - Strings which use unclear terms or require additional context to be
-+# understood.
-+# - Strings which make invalid assumptions about notation of date, time or
-+# money.
-+# - Pluralisation problems.
-+# - Incorrect English spelling.
-+# - Incorrect formatting.
-+# It can be your email address, or a mailing list address where translators
-+# can write to without being subscribed, or the URL of a web page through
-+# which the translators can contact you.
-+MSGID_BUGS_ADDRESS =
-+
-+# This is the list of locale categories, beyond LC_MESSAGES, for which the
-+# message catalogs shall be used. It is usually empty.
-+EXTRA_LOCALE_CATEGORIES =
---- lrzsz-0.12.20.safe/po/quot.sed 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/po/quot.sed 2004-09-12 14:40:34.754687440 -0400
-@@ -0,0 +1,6 @@
-+s/"\([^"]*\)"/“\1â€/g
-+s/`\([^`']*\)'/‘\1’/g
-+s/ '\([^`']*\)' / ‘\1’ /g
-+s/ '\([^`']*\)'$/ ‘\1’/g
-+s/^'\([^`']*\)' /‘\1’ /g
-+s/“â€/""/g
---- lrzsz-0.12.20.safe/po/remove-potcdate.sin 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/po/remove-potcdate.sin 2004-09-12 14:40:34.762686224 -0400
-@@ -0,0 +1,19 @@
-+# Sed script that remove the POT-Creation-Date line in the header entry
-+# from a POT file.
-+#
-+# The distinction between the first and the following occurrences of the
-+# pattern is achieved by looking at the hold space.
-+/^"POT-Creation-Date: .*"$/{
-+x
-+# Test if the hold space is empty.
-+s/P/P/
-+ta
-+# Yes it was empty. First occurrence. Remove the line.
-+g
-+d
-+bb
-+:a
-+# The hold space was nonempty. Following occurrences. Do nothing.
-+x
-+:b
-+}
---- lrzsz-0.12.20.safe/po/Rules-quot 1969-12-31 19:00:00.000000000 -0500
-+++ lrzsz-0.12.20/po/Rules-quot 2004-09-12 14:40:34.778683792 -0400
-@@ -0,0 +1,47 @@
-+# Special Makefile rules for English message catalogs with quotation marks.
-+
-+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
-+
-+.SUFFIXES: .insert-header .po-update-en
-+
-+en@quot.po-create:
-+ $(MAKE) en@quot.po-update
-+en@boldquot.po-create:
-+ $(MAKE) en@boldquot.po-update
-+
-+en@quot.po-update: en@quot.po-update-en
-+en@boldquot.po-update: en@boldquot.po-update-en
-+
-+.insert-header.po-update-en:
-+ @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
-+ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
-+ tmpdir=`pwd`; \
-+ echo "$$lang:"; \
-+ ll=`echo $$lang | sed -e 's/@.*//'`; \
-+ LC_ALL=C; export LC_ALL; \
-+ cd $(srcdir); \
-+ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
-+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
-+ rm -f $$tmpdir/$$lang.new.po; \
-+ else \
-+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
-+ :; \
-+ else \
-+ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
-+ exit 1; \
-+ fi; \
-+ fi; \
-+ else \
-+ echo "creation of $$lang.po failed!" 1>&2; \
-+ rm -f $$tmpdir/$$lang.new.po; \
-+ fi
-+
-+en@quot.insert-header: insert-header.sin
-+ sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
-+
-+en@boldquot.insert-header: insert-header.sin
-+ sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
-+
-+mostlyclean: mostlyclean-quot
-+mostlyclean-quot:
-+ rm -f *.insert-header
---- lrzsz-0.12.20.safe/po/stamp-cat-id 1998-12-30 02:50:01.000000000 -0500
-+++ lrzsz-0.12.20/po/stamp-cat-id 1969-12-31 19:00:00.000000000 -0500
-@@ -1 +0,0 @@
--timestamp
---- lrzsz-0.12.20.safe/src/Makefile.am 1998-12-28 03:38:47.000000000 -0500
-+++ lrzsz-0.12.20/src/Makefile.am 2004-09-12 14:40:53.665812512 -0400
-@@ -2,12 +2,12 @@
- lrz_SOURCES=lrz.c timing.c zperr.c zreadline.c crctab.c rbsb.c zm.c protname.c tcp.c lsyslog.c canit.c
- lsz_SOURCES=lsz.c timing.c zperr.c zreadline.c crctab.c rbsb.c zm.c protname.c tcp.c lsyslog.c canit.c
- noinst_HEADERS = timing.h zglobal.h zmodem.h
--datadir = $(prefix)/@DATADIRNAME@
-+datadir = $(prefix)/share
- localedir = $(datadir)/locale
- CFLAGS=@CFLAGS@
- DISTCLEAN_FILES=lrzszbug
-
--LDADD = ../lib/libzmodem.a @INTLLIBS@
-+LDADD = ../lib/libzmodem.a @LIBINTL@
- AUTOMAKE_OPTIONS=ansi2knr
- EXTRA_DIST = ansi2knr.1 ansi2knr.c lrzszbug.in
- INCLUDES = -I.. -I$(srcdir) -I$(top_srcdir)/src -I../intl -I$(top_srcdir)/lib
diff --git a/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/lrzsz_fix_for_automake-1.12.patch b/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/lrzsz_fix_for_automake-1.12.patch
deleted file mode 100644
index 682f1c9c8d..0000000000
--- a/meta/recipes-bsp/lrzsz/lrzsz-0.12.20/lrzsz_fix_for_automake-1.12.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-Upstream-Status: Pending
-
-This patch fixes following issue with automake 1.12
-
-| configure.in:95: error: automatic de-ANSI-fication support has been removed
-...
-| lib/Makefile.am:3: error: automatic de-ANSI-fication support has been removed
-| lib/Makefile.am: installing './depcomp'
-| src/Makefile.am:11: error: automatic de-ANSI-fication support has been removed
-
-
-Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
-2012/05/03
-
-Index: lrzsz-0.12.20/configure.in
-===================================================================
---- lrzsz-0.12.20.orig/configure.in
-+++ lrzsz-0.12.20/configure.in
-@@ -92,7 +92,6 @@ AC_PROG_RANLIB
- AC_ISC_POSIX
- AC_AIX
- AC_MINIX
--AM_C_PROTOTYPES
- AC_C_CONST
- AC_C_INLINE
-
-Index: lrzsz-0.12.20/lib/Makefile.am
-===================================================================
---- lrzsz-0.12.20.orig/lib/Makefile.am
-+++ lrzsz-0.12.20/lib/Makefile.am
-@@ -1,6 +1,5 @@
- noinst_LIBRARIES=libzmodem.a
- CFLAGS=@CFLAGS@
--AUTOMAKE_OPTIONS=ansi2knr
-
- EXTRA_DIST = alloca.c ansi2knr.1 ansi2knr.c \
- getopt.c getopt1.c mkdir.c mktime.c \
-Index: lrzsz-0.12.20/src/Makefile.am
-===================================================================
---- lrzsz-0.12.20.orig/src/Makefile.am
-+++ lrzsz-0.12.20/src/Makefile.am
-@@ -8,7 +8,6 @@ CFLAGS=@CFLAGS@
- DISTCLEAN_FILES=lrzszbug
-
- LDADD = ../lib/libzmodem.a @LIBINTL@
--AUTOMAKE_OPTIONS=ansi2knr
- EXTRA_DIST = ansi2knr.1 ansi2knr.c lrzszbug.in
- INCLUDES = -I.. -I$(srcdir) -I$(top_srcdir)/src -I../intl -I$(top_srcdir)/lib
- #DEFS = -DLOCALEDIR=\"$(localedir)\" -DOS=\"@host_os@\" -DCPU=\"@host_cpu@\"
diff --git a/meta/recipes-bsp/lrzsz/lrzsz_0.12.20.bb b/meta/recipes-bsp/lrzsz/lrzsz_0.12.20.bb
index 34556b2c29..4129237c59 100644
--- a/meta/recipes-bsp/lrzsz/lrzsz_0.12.20.bb
+++ b/meta/recipes-bsp/lrzsz/lrzsz_0.12.20.bb
@@ -13,11 +13,9 @@ DEPENDS = ""
PR = "r6"
SRC_URI = "http://www.ohse.de/uwe/releases/lrzsz-${PV}.tar.gz \
+ file://autotools-update.patch \
file://autotools.patch \
file://makefile.patch \
- file://gettext.patch \
- file://acdefine.patch \
- file://lrzsz_fix_for_automake-1.12.patch \
file://lrzsz-check-locale.h.patch \
file://cve-2018-10195.patch \
file://include.patch \
--
2.20.1
^ permalink raw reply related [flat|nested] 35+ messages in thread