* ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr [not found] <17744C0B55ADA271.25264@lists.openembedded.org> @ 2023-07-22 21:03 ` Piotr Łobacz 2023-07-23 15:04 ` Alexandre Belloni 0 siblings, 1 reply; 7+ messages in thread From: Piotr Łobacz @ 2023-07-22 21:03 UTC (permalink / raw) To: openembedded-core@lists.openembedded.org, Piotr Łobacz Cc: alexandre.belloni@bootlin.com Hello Alexadre, this time everything should be fixed and working :D I have tested it thrice:P Additionally I've discovered that somehow, during all these patchsets, an extra param "--numeric-owner" has gone from opkg-build script, which is important to store uid(s)/gid(s) as numbers instead of names in tar archive. An updated patch has been already pushed to opkg-utils upstream. You can run it and tell if everything is OK. BR Piotr Od: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> w imieniu użytkownika Piotr Łobacz via lists.openembedded.org <p.lobacz=welotec.com@lists.openembedded.org> Wysłane: sobota, 22 lipca 2023 22:55 Do: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> DW: Piotr Łobacz <p.lobacz@welotec.com> Temat: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr Extend OPKGBUILDCMD variable, with additional parameters, depending on target distro features, in order to support ACLs and xattr. With fix pushed to the opkg-devel: https://groups.google.com/g/opkg-devel/c/dYNHrLjDwg8 opkg-build is able to create tar archives with ACLs and xattr. Signed-off-by: Piotr Łobacz <p.lobacz@welotec.com> --- meta/classes-global/package_ipk.bbclass | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/meta/classes-global/package_ipk.bbclass b/meta/classes-global/package_ipk.bbclass index b4b7bc9ac2..a0f106e4ad 100644 --- a/meta/classes-global/package_ipk.bbclass +++ b/meta/classes-global/package_ipk.bbclass @@ -15,7 +15,7 @@ IPKGCONF_SDK_TARGET = "${WORKDIR}/opkg-sdk-target.conf" PKGWRITEDIRIPK = "${WORKDIR}/deploy-ipks" # Program to be used to build opkg packages -OPKGBUILDCMD ??= 'opkg-build -Z xz -a "${XZ_DEFAULTS}"' +OPKGBUILDCMD ??= 'opkg-build -Z xz -a "${XZ_DEFAULTS}" ${@bb.utils.contains('DISTRO_FEATURES', 'acl', '-A', '', d)} ${@bb.utils.contains('DISTRO_FEATURES', 'xattr', '-X', '', d)}' OPKG_ARGS += "--force_postinstall --prefer-arch-to-version" OPKG_ARGS += "${@['', '--no-install-recommends'][d.getVar("NO_RECOMMENDATIONS") == "1"]}" -- 2.34.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr 2023-07-22 21:03 ` ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr Piotr Łobacz @ 2023-07-23 15:04 ` Alexandre Belloni 2023-07-23 15:53 ` ODP: " Piotr Łobacz [not found] ` <17748A1F3FBBC488.4774@lists.openembedded.org> 0 siblings, 2 replies; 7+ messages in thread From: Alexandre Belloni @ 2023-07-23 15:04 UTC (permalink / raw) To: Piotr Łobacz; +Cc: openembedded-core@lists.openembedded.org Hello, On 22/07/2023 21:03:43+0000, Piotr Łobacz wrote: > Hello Alexadre, > this time everything should be fixed and working :D I have tested it thrice:P > > Additionally I've discovered that somehow, during all these patchsets, an extra param "--numeric-owner" has gone from opkg-build script, > which is important to store uid(s)/gid(s) as numbers instead of names in tar archive. An updated patch has been already pushed to opkg-utils > upstream. > > You can run it and tell if everything is OK. > This ran and mostly worked. The remaining issue is the reproducibility issue: https://autobuilder.yocto.io/pub/repro-fail/oe-reproducible-20230722-1a1a_7s6/ Unfortunately, diffoscope is not running on that large set. > BR > Piotr > > > Od: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> w imieniu użytkownika Piotr Łobacz via lists.openembedded.org <p.lobacz=welotec.com@lists.openembedded.org> > Wysłane: sobota, 22 lipca 2023 22:55 > Do: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> > DW: Piotr Łobacz <p.lobacz@welotec.com> > Temat: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr > > Extend OPKGBUILDCMD variable, with additional parameters, depending > on target distro features, in order to support ACLs and xattr. > > With fix pushed to the opkg-devel: > https://groups.google.com/g/opkg-devel/c/dYNHrLjDwg8 > opkg-build is able to create tar archives with ACLs and xattr. > > Signed-off-by: Piotr Łobacz <p.lobacz@welotec.com> > --- > meta/classes-global/package_ipk.bbclass | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/meta/classes-global/package_ipk.bbclass b/meta/classes-global/package_ipk.bbclass > index b4b7bc9ac2..a0f106e4ad 100644 > --- a/meta/classes-global/package_ipk.bbclass > +++ b/meta/classes-global/package_ipk.bbclass > @@ -15,7 +15,7 @@ IPKGCONF_SDK_TARGET = "${WORKDIR}/opkg-sdk-target.conf" > PKGWRITEDIRIPK = "${WORKDIR}/deploy-ipks" > > # Program to be used to build opkg packages > -OPKGBUILDCMD ??= 'opkg-build -Z xz -a "${XZ_DEFAULTS}"' > +OPKGBUILDCMD ??= 'opkg-build -Z xz -a "${XZ_DEFAULTS}" ${@bb.utils.contains('DISTRO_FEATURES', 'acl', '-A', '', d)} ${@bb.utils.contains('DISTRO_FEATURES', 'xattr', '-X', '', d)}' > > OPKG_ARGS += "--force_postinstall --prefer-arch-to-version" > OPKG_ARGS += "${@['', '--no-install-recommends'][d.getVar("NO_RECOMMENDATIONS") == "1"]}" > -- > 2.34.1 > > -=-=-=-=-=-=-=-=-=-=-=- > Links: You receive all messages sent to this group. > View/Reply Online (#184740): https://lists.openembedded.org/g/openembedded-core/message/184740 > Mute This Topic: https://lists.openembedded.org/mt/100301979/3617179 > Group Owner: openembedded-core+owner@lists.openembedded.org > Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [alexandre.belloni@bootlin.com] > -=-=-=-=-=-=-=-=-=-=-=- > -- Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com ^ permalink raw reply [flat|nested] 7+ messages in thread
* ODP: ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr 2023-07-23 15:04 ` Alexandre Belloni @ 2023-07-23 15:53 ` Piotr Łobacz [not found] ` <17748A1F3FBBC488.4774@lists.openembedded.org> 1 sibling, 0 replies; 7+ messages in thread From: Piotr Łobacz @ 2023-07-23 15:53 UTC (permalink / raw) To: Alexandre Belloni; +Cc: openembedded-core@lists.openembedded.org Hi, > Hello, > > On 22/07/2023 21:03:43+0000, Piotr Łobacz wrote: > > Hello Alexadre, > > this time everything should be fixed and working :D I have tested it thrice:P > > > > Additionally I've discovered that somehow, during all these patchsets, an extra param "--numeric-owner" has gone from opkg-build script, > > which is important to store uid(s)/gid(s) as numbers instead of names in tar archive. An updated patch has been already pushed to opkg-utils > > upstream. > > > > You can run it and tell if everything is OK. > > > > This ran and mostly worked. The remaining issue is the reproducibility > issue: I'm glad that we went further in this problem, but > https://autobuilder.yocto.io/pub/repro-fail/oe-reproducible-20230722-1a1a_7s6/ > Unfortunately, diffoscope is not running on that large set. unfortunately I don't have knowledge what's this link about. Can you explain me a little bit and how is this being run from cli? > BR > Piotr > > > Od: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> w imieniu użytkownika Piotr Łobacz via lists.openembedded.org <p.lobacz=welotec.com@lists.openembedded.org> > Wysłane: sobota, 22 lipca 2023 22:55 > Do: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> > DW: Piotr Łobacz <p.lobacz@welotec.com> > Temat: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr > > Extend OPKGBUILDCMD variable, with additional parameters, depending > on target distro features, in order to support ACLs and xattr. > > With fix pushed to the opkg-devel: > https://groups.google.com/g/opkg-devel/c/dYNHrLjDwg8 > opkg-build is able to create tar archives with ACLs and xattr. > > Signed-off-by: Piotr Łobacz <p.lobacz@welotec.com> > --- > meta/classes-global/package_ipk.bbclass | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/meta/classes-global/package_ipk.bbclass b/meta/classes-global/package_ipk.bbclass > index b4b7bc9ac2..a0f106e4ad 100644 > --- a/meta/classes-global/package_ipk.bbclass > +++ b/meta/classes-global/package_ipk.bbclass > @@ -15,7 +15,7 @@ IPKGCONF_SDK_TARGET = "${WORKDIR}/opkg-sdk-target.conf" > PKGWRITEDIRIPK = "${WORKDIR}/deploy-ipks" > > # Program to be used to build opkg packages > -OPKGBUILDCMD ??= 'opkg-build -Z xz -a "${XZ_DEFAULTS}"' > +OPKGBUILDCMD ??= 'opkg-build -Z xz -a "${XZ_DEFAULTS}" ${@bb.utils.contains('DISTRO_FEATURES', 'acl', '-A', '', d)} ${@bb.utils.contains('DISTRO_FEATURES', 'xattr', '-X', '', d)}' > > OPKG_ARGS += "--force_postinstall --prefer-arch-to-version" > OPKG_ARGS += "${@['', '--no-install-recommends'][d.getVar("NO_RECOMMENDATIONS") == "1"]}" > -- > 2.34.1 > > -=-=-=-=-=-=-=-=-=-=-=- > Links: You receive all messages sent to this group. > View/Reply Online (#184740): https://lists.openembedded.org/g/openembedded-core/message/184740 > Mute This Topic: https://lists.openembedded.org/mt/100301979/3617179 > Group Owner: openembedded-core+owner@lists.openembedded.org > Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [alexandre.belloni@bootlin.com] > -=-=-=-=-=-=-=-=-=-=-=- > -- Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com/ ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <17748A1F3FBBC488.4774@lists.openembedded.org>]
* ODP: ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr [not found] ` <17748A1F3FBBC488.4774@lists.openembedded.org> @ 2023-07-23 16:32 ` Piotr Łobacz 2023-07-23 22:23 ` Alexandre Belloni 0 siblings, 1 reply; 7+ messages in thread From: Piotr Łobacz @ 2023-07-23 16:32 UTC (permalink / raw) To: Alexandre Belloni, Piotr Łobacz Cc: openembedded-core@lists.openembedded.org OK, I got it, but correct me if I'm wrong, namely packages differs between builds? I have found this link https://docs.yoctoproject.org/dev/test-manual/reproducible-builds.html for it with instructions on how to reproduce it. I'll give it a try and In case of problems will try to ask. Cheers, Piotr Od: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> w imieniu użytkownika Piotr Łobacz via lists.openembedded.org <p.lobacz=welotec.com@lists.openembedded.org> Wysłane: niedziela, 23 lipca 2023 17:53 Do: Alexandre Belloni <alexandre.belloni@bootlin.com> DW: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> Temat: ODP: ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr Hi, > Hello, > > On 22/07/2023 21:03:43+0000, Piotr Łobacz wrote: > > Hello Alexadre, > > this time everything should be fixed and working :D I have tested it thrice:P > > > > Additionally I've discovered that somehow, during all these patchsets, an extra param "--numeric-owner" has gone from opkg-build script, > > which is important to store uid(s)/gid(s) as numbers instead of names in tar archive. An updated patch has been already pushed to opkg-utils > > upstream. > > > > You can run it and tell if everything is OK. > > > > This ran and mostly worked. The remaining issue is the reproducibility > issue: I'm glad that we went further in this problem, but > https://autobuilder.yocto.io/pub/repro-fail/oe-reproducible-20230722-1a1a_7s6/ > Unfortunately, diffoscope is not running on that large set. unfortunately I don't have knowledge what's this link about. Can you explain me a little bit and how is this being run from cli? > BR > Piotr > > > Od: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> w imieniu użytkownika Piotr Łobacz via lists.openembedded.org <p.lobacz=welotec.com@lists.openembedded.org> > Wysłane: sobota, 22 lipca 2023 22:55 > Do: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> > DW: Piotr Łobacz <p.lobacz@welotec.com> > Temat: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr > > Extend OPKGBUILDCMD variable, with additional parameters, depending > on target distro features, in order to support ACLs and xattr. > > With fix pushed to the opkg-devel: > https://groups.google.com/g/opkg-devel/c/dYNHrLjDwg8 > opkg-build is able to create tar archives with ACLs and xattr. > > Signed-off-by: Piotr Łobacz <p.lobacz@welotec.com> > --- > meta/classes-global/package_ipk.bbclass | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/meta/classes-global/package_ipk.bbclass b/meta/classes-global/package_ipk.bbclass > index b4b7bc9ac2..a0f106e4ad 100644 > --- a/meta/classes-global/package_ipk.bbclass > +++ b/meta/classes-global/package_ipk.bbclass > @@ -15,7 +15,7 @@ IPKGCONF_SDK_TARGET = "${WORKDIR}/opkg-sdk-target.conf" > PKGWRITEDIRIPK = "${WORKDIR}/deploy-ipks" > > # Program to be used to build opkg packages > -OPKGBUILDCMD ??= 'opkg-build -Z xz -a "${XZ_DEFAULTS}"' > +OPKGBUILDCMD ??= 'opkg-build -Z xz -a "${XZ_DEFAULTS}" ${@bb.utils.contains('DISTRO_FEATURES', 'acl', '-A', '', d)} ${@bb.utils.contains('DISTRO_FEATURES', 'xattr', '-X', '', d)}' > > OPKG_ARGS += "--force_postinstall --prefer-arch-to-version" > OPKG_ARGS += "${@['', '--no-install-recommends'][d.getVar("NO_RECOMMENDATIONS") == "1"]}" > -- > 2.34.1 > > > -- Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com/ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ODP: ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr 2023-07-23 16:32 ` Piotr Łobacz @ 2023-07-23 22:23 ` Alexandre Belloni 2023-07-23 23:05 ` ODP: " Piotr Łobacz [not found] ` <1774A1B0E65BDA10.25264@lists.openembedded.org> 0 siblings, 2 replies; 7+ messages in thread From: Alexandre Belloni @ 2023-07-23 22:23 UTC (permalink / raw) To: Piotr Łobacz; +Cc: openembedded-core@lists.openembedded.org On 23/07/2023 16:32:55+0000, Piotr Łobacz wrote: > OK, I got it, but correct me if I'm wrong, namely packages differs between builds? > > I have found this link https://docs.yoctoproject.org/dev/test-manual/reproducible-builds.html for it with instructions > on how to reproduce it. I'll give it a try and In case of problems will try to ask. > You will find the packages that differ in reproducibleA and reproducibleB so you can compare them yourself. > Cheers, > Piotr > > Od: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> w imieniu użytkownika Piotr Łobacz via lists.openembedded.org <p.lobacz=welotec.com@lists.openembedded.org> > Wysłane: niedziela, 23 lipca 2023 17:53 > Do: Alexandre Belloni <alexandre.belloni@bootlin.com> > DW: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> > Temat: ODP: ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr > > Hi, > > > Hello, > > > > On 22/07/2023 21:03:43+0000, Piotr Łobacz wrote: > > > Hello Alexadre, > > > this time everything should be fixed and working :D I have tested it thrice:P > > > > > > Additionally I've discovered that somehow, during all these patchsets, an extra param "--numeric-owner" has gone from opkg-build script, > > > which is important to store uid(s)/gid(s) as numbers instead of names in tar archive. An updated patch has been already pushed to opkg-utils > > > upstream. > > > > > > You can run it and tell if everything is OK. > > > > > > > This ran and mostly worked. The remaining issue is the reproducibility > > issue: > > I'm glad that we went further in this problem, but > > https://autobuilder.yocto.io/pub/repro-fail/oe-reproducible-20230722-1a1a_7s6/ > > > Unfortunately, diffoscope is not running on that large set. > > unfortunately I don't have knowledge what's this link about. Can you explain me a little bit and how is this being run from cli? > > > BR > > Piotr > > > > > > Od: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> w imieniu użytkownika Piotr Łobacz via lists.openembedded.org <p.lobacz=welotec.com@lists.openembedded.org> > > Wysłane: sobota, 22 lipca 2023 22:55 > > Do: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> > > DW: Piotr Łobacz <p.lobacz@welotec.com> > > Temat: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr > > > > Extend OPKGBUILDCMD variable, with additional parameters, depending > > on target distro features, in order to support ACLs and xattr. > > > > With fix pushed to the opkg-devel: > > https://groups.google.com/g/opkg-devel/c/dYNHrLjDwg8 > > opkg-build is able to create tar archives with ACLs and xattr. > > > > Signed-off-by: Piotr Łobacz <p.lobacz@welotec.com> > > --- > > meta/classes-global/package_ipk.bbclass | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/meta/classes-global/package_ipk.bbclass b/meta/classes-global/package_ipk.bbclass > > index b4b7bc9ac2..a0f106e4ad 100644 > > --- a/meta/classes-global/package_ipk.bbclass > > +++ b/meta/classes-global/package_ipk.bbclass > > @@ -15,7 +15,7 @@ IPKGCONF_SDK_TARGET = "${WORKDIR}/opkg-sdk-target.conf" > > PKGWRITEDIRIPK = "${WORKDIR}/deploy-ipks" > > > > # Program to be used to build opkg packages > > -OPKGBUILDCMD ??= 'opkg-build -Z xz -a "${XZ_DEFAULTS}"' > > +OPKGBUILDCMD ??= 'opkg-build -Z xz -a "${XZ_DEFAULTS}" ${@bb.utils.contains('DISTRO_FEATURES', 'acl', '-A', '', d)} ${@bb.utils.contains('DISTRO_FEATURES', 'xattr', '-X', '', d)}' > > > > OPKG_ARGS += "--force_postinstall --prefer-arch-to-version" > > OPKG_ARGS += "${@['', '--no-install-recommends'][d.getVar("NO_RECOMMENDATIONS") == "1"]}" > > -- > > 2.34.1 > > > > > > > > > > -- > Alexandre Belloni, co-owner and COO, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com/ > > -=-=-=-=-=-=-=-=-=-=-=- > Links: You receive all messages sent to this group. > View/Reply Online (#184761): https://lists.openembedded.org/g/openembedded-core/message/184761 > Mute This Topic: https://lists.openembedded.org/mt/100313731/3617179 > Group Owner: openembedded-core+owner@lists.openembedded.org > Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [alexandre.belloni@bootlin.com] > -=-=-=-=-=-=-=-=-=-=-=- > -- Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com ^ permalink raw reply [flat|nested] 7+ messages in thread
* ODP: ODP: ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr 2023-07-23 22:23 ` Alexandre Belloni @ 2023-07-23 23:05 ` Piotr Łobacz [not found] ` <1774A1B0E65BDA10.25264@lists.openembedded.org> 1 sibling, 0 replies; 7+ messages in thread From: Piotr Łobacz @ 2023-07-23 23:05 UTC (permalink / raw) To: Alexandre Belloni, Alex Stewart; +Cc: openembedded-core@lists.openembedded.org [-- Attachment #1: Type: text/plain, Size: 25201 bytes --] Hi, on your advice I have taken the first package and run diffoscope which has given me such result: plobacz@latitude:~/workspace/reproducible$ diffoscope A/a52dec-doc_0.7.4-r4_core2-64.ipk B/a52dec-doc_0.7.4-r4_core2-64.ipk --- A/a52dec-doc_0.7.4-r4_core2-64.ipk +++ B/a52dec-doc_0.7.4-r4_core2-64.ipk ├── file list │ @@ -1,3 +1,3 @@ │ ?rw-r--r-- 0 0 0 4 1970-01-01 00:00:00.000000 debian-binary │ -?rw-r--r-- 0 0 0 504 1970-01-01 00:00:00.000000 control.tar.gz │ -?rw-r--r-- 0 0 0 1236 1970-01-01 00:00:00.000000 data.tar.xz │ +?rw-r--r-- 0 0 0 503 1970-01-01 00:00:00.000000 control.tar.gz │ +?rw-r--r-- 0 0 0 1240 1970-01-01 00:00:00.000000 data.tar.xz ├── control.tar.gz │ ├── control.tar │ │┄ Format-specific differences are supported for tape archives (.tar) but no file-specific differences were detected; falling back to a binary diff. file(1) reports: POSIX tar archive │ │ @@ -26,18 +26,18 @@ │ │ 00000190: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00000200: 3330 2061 7469 6d65 3d31 3639 3030 3733 30 atime=1690073 │ │ -00000210: 3231 352e 3839 3835 3637 3730 310a 3330 215.898567701.30 │ │ -00000220: 2063 7469 6d65 3d31 3639 3030 3733 3231 ctime=169007321 │ │ -00000230: 352e 3631 3735 3635 3337 350a 0000 0000 5.617565375..... │ │ +00000200: 3330 2061 7469 6d65 3d31 3639 3030 3831 30 atime=1690081 │ │ +00000210: 3433 312e 3335 3033 3137 3933 340a 3330 431.350317934.30 │ │ +00000220: 2063 7469 6d65 3d31 3639 3030 3831 3433 ctime=169008143 │ │ +00000230: 312e 3133 3633 3136 3136 350a 0000 0000 1.136316165..... │ │ 00000240: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000250: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000260: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000270: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000280: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000290: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000002a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ ├── data.tar.xz │ ├── data.tar │ │┄ Format-specific differences are supported for this file format but no file-specific differences were detected; falling back to a binary diff. file(1) reports: POSIX tar archive │ │ @@ -26,18 +26,18 @@ │ │ 00000190: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00000200: 3330 2061 7469 6d65 3d31 3639 3030 3732 30 atime=1690072 │ │ -00000210: 3132 332e 3039 3835 3135 3131 330a 3330 123.098515113.30 │ │ -00000220: 2063 7469 6d65 3d31 3639 3030 3730 3136 ctime=169007016 │ │ -00000230: 322e 3634 3134 3832 3935 380a 0000 0000 2.641482958..... │ │ +00000200: 3330 2061 7469 6d65 3d31 3639 3030 3737 30 atime=1690077 │ │ +00000210: 3336 362e 3735 3039 3333 3932 310a 3330 366.750933921.30 │ │ +00000220: 2063 7469 6d65 3d31 3639 3030 3737 3336 ctime=169007736 │ │ +00000230: 362e 3639 3139 3333 3433 330a 0000 0000 6.691933433..... │ │ 00000240: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000250: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000260: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000270: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000280: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000290: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000002a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ @@ -122,18 +122,18 @@ │ │ 00000790: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000007a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000007b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000007c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000007d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000007e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000007f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00000800: 3330 2061 7469 6d65 3d31 3639 3030 3732 30 atime=1690072 │ │ -00000810: 3132 332e 3039 3835 3135 3131 330a 3330 123.098515113.30 │ │ -00000820: 2063 7469 6d65 3d31 3639 3030 3730 3136 ctime=169007016 │ │ -00000830: 322e 3634 3134 3832 3935 380a 0000 0000 2.641482958..... │ │ +00000800: 3330 2061 7469 6d65 3d31 3639 3030 3737 30 atime=1690077 │ │ +00000810: 3336 362e 3735 3039 3333 3932 310a 3330 366.750933921.30 │ │ +00000820: 2063 7469 6d65 3d31 3639 3030 3737 3336 ctime=169007736 │ │ +00000830: 362e 3639 3139 3333 3433 330a 0000 0000 6.691933433..... │ │ 00000840: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000850: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000860: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000870: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000880: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000890: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000008a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ @@ -218,18 +218,18 @@ │ │ 00000d90: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000da0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000db0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000dc0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000dd0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000de0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000df0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00000e00: 3330 2061 7469 6d65 3d31 3639 3030 3732 30 atime=1690072 │ │ -00000e10: 3132 332e 3039 3935 3135 3132 320a 3330 123.099515122.30 │ │ -00000e20: 2063 7469 6d65 3d31 3639 3030 3730 3136 ctime=169007016 │ │ -00000e30: 322e 3634 3134 3832 3935 380a 0000 0000 2.641482958..... │ │ +00000e00: 3330 2061 7469 6d65 3d31 3639 3030 3737 30 atime=1690077 │ │ +00000e10: 3336 362e 3639 3239 3333 3434 310a 3330 366.692933441.30 │ │ +00000e20: 2063 7469 6d65 3d31 3639 3030 3737 3336 ctime=169007736 │ │ +00000e30: 362e 3639 3139 3333 3433 330a 0000 0000 6.691933433..... │ │ 00000e40: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000e50: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000e60: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000e70: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000e80: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000e90: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000ea0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ @@ -314,18 +314,18 @@ │ │ 00001390: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000013a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000013b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000013c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000013d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000013e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000013f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00001400: 3330 2061 7469 6d65 3d31 3639 3030 3732 30 atime=1690072 │ │ -00001410: 3132 332e 3039 3935 3135 3132 320a 3330 123.099515122.30 │ │ -00001420: 2063 7469 6d65 3d31 3639 3030 3730 3136 ctime=169007016 │ │ -00001430: 322e 3634 3134 3832 3935 380a 0000 0000 2.641482958..... │ │ +00001400: 3330 2061 7469 6d65 3d31 3639 3030 3737 30 atime=1690077 │ │ +00001410: 3336 362e 3735 3139 3333 3932 390a 3330 366.751933929.30 │ │ +00001420: 2063 7469 6d65 3d31 3639 3030 3737 3336 ctime=169007736 │ │ +00001430: 362e 3639 3239 3333 3434 310a 0000 0000 6.692933441..... │ │ 00001440: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001450: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001460: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001470: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001480: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001490: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000014a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ @@ -386,16 +386,16 @@ │ │ 00001810: 6d61 6e31 2f50 6178 4865 6164 6572 732f man1/PaxHeaders/ │ │ 00001820: 6135 3264 6563 2e31 0000 0000 0000 0000 a52dec.1........ │ │ 00001830: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001840: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001850: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001860: 0000 0000 3030 3030 3634 3400 3030 3030 ....0000644.0000 │ │ 00001870: 3030 3000 3030 3030 3030 3000 3030 3030 000.0000000.0000 │ │ -00001880: 3030 3030 3037 3300 3037 3532 3036 3635 0000073.07520665 │ │ -00001890: 3034 3100 3031 3437 3531 0020 7800 0000 041.014751. x... │ │ +00001880: 3030 3030 3037 3200 3037 3532 3036 3635 0000072.07520665 │ │ +00001890: 3034 3100 3031 3437 3530 0020 7800 0000 041.014750. x... │ │ 000018a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000018b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000018c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000018d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000018e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000018f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001900: 0075 7374 6172 0030 3000 0000 0000 0000 .ustar.00....... │ │ @@ -410,18 +410,18 @@ │ │ 00001990: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000019a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000019b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000019c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000019d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000019e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000019f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00001a00: 3330 2061 7469 6d65 3d31 3639 3030 3732 30 atime=1690072 │ │ -00001a10: 3132 332e 3134 3435 3135 3439 330a 3239 123.144515493.29 │ │ -00001a20: 2063 7469 6d65 3d31 3639 3030 3730 3136 ctime=169007016 │ │ -00001a30: 322e 3634 3034 3832 3935 0a00 0000 0000 2.64048295...... │ │ +00001a00: 3330 2061 7469 6d65 3d31 3639 3030 3737 30 atime=1690077 │ │ +00001a10: 3336 362e 3737 3939 3334 3136 310a 3238 366.779934161.28 │ │ +00001a20: 2063 7469 6d65 3d31 3639 3030 3737 3336 ctime=169007736 │ │ +00001a30: 362e 3637 3539 3333 330a 0000 0000 0000 6.6759333....... │ │ 00001a40: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001a50: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001a60: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001a70: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001a80: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001a90: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001aa0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ @@ -578,16 +578,16 @@ │ │ 00002410: 6d61 6e31 2f50 6178 4865 6164 6572 732f man1/PaxHeaders/ │ │ 00002420: 6578 7472 6163 745f 6135 322e 3100 0000 extract_a52.1... │ │ 00002430: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002440: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002450: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002460: 0000 0000 3030 3030 3634 3400 3030 3030 ....0000644.0000 │ │ 00002470: 3030 3000 3030 3030 3030 3000 3030 3030 000.0000000.0000 │ │ -00002480: 3030 3030 3037 3300 3037 3532 3036 3635 0000073.07520665 │ │ -00002490: 3034 3100 3031 3630 3237 0020 7800 0000 041.016027. x... │ │ +00002480: 3030 3030 3037 3200 3037 3532 3036 3635 0000072.07520665 │ │ +00002490: 3034 3100 3031 3630 3236 0020 7800 0000 041.016026. x... │ │ 000024a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000024b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000024c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000024d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000024e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000024f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002500: 0075 7374 6172 0030 3000 0000 0000 0000 .ustar.00....... │ │ @@ -602,18 +602,18 @@ │ │ 00002590: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000025a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000025b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000025c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000025d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000025e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000025f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00002600: 3330 2061 7469 6d65 3d31 3639 3030 3732 30 atime=1690072 │ │ -00002610: 3132 332e 3134 3835 3135 3532 360a 3239 123.148515526.29 │ │ -00002620: 2063 7469 6d65 3d31 3639 3030 3730 3136 ctime=169007016 │ │ -00002630: 322e 3634 3034 3832 3935 0a00 0000 0000 2.64048295...... │ │ +00002600: 3330 2061 7469 6d65 3d31 3639 3030 3737 30 atime=1690077 │ │ +00002610: 3336 362e 3738 3039 3334 3136 390a 3238 366.780934169.28 │ │ +00002620: 2063 7469 6d65 3d31 3639 3030 3737 3336 ctime=169007736 │ │ +00002630: 362e 3637 3539 3333 330a 0000 0000 0000 6.6759333....... │ │ 00002640: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002650: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002660: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002670: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002680: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002690: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000026a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ Then, again another first best package which occurred to be openssl_3.1.1-r0_core2-64.ipk and also the same issue. The difference between atime and ctime... So, in principle the only difference is the date of creation. I have my suspicions that probably due to the usage of posix format for tar command in opkg-build script these dates differes, but I need to investigate it and maybe consult it with tar developers. BR Piotr ________________________________ Od: Alexandre Belloni <alexandre.belloni@bootlin.com> Wysłane: poniedziałek, 24 lipca 2023 00:23 Do: Piotr Łobacz <p.lobacz@welotec.com> DW: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> Temat: Re: ODP: ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr On 23/07/2023 16:32:55+0000, Piotr Łobacz wrote: > OK, I got it, but correct me if I'm wrong, namely packages differs between builds? > > I have found this link https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdocs.yoctoproject.org%2Fdev%2Ftest-manual%2Freproducible-builds.html&data=05%7C01%7Cp.lobacz%40welotec.com%7C51dd1d7467324ac969b308db8bcb7ad6%7C25111a7f1d5a4c51a4ca7f8e44011b39%7C0%7C0%7C638257478278865450%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=ZKFRDOAbZeeVezYGVUislVmmeJWSCuYq%2BKc6m1KNDhE%3D&reserved=0<https://docs.yoctoproject.org/dev/test-manual/reproducible-builds.html> for it with instructions > on how to reproduce it. I'll give it a try and In case of problems will try to ask. > You will find the packages that differ in reproducibleA and reproducibleB so you can compare them yourself. > Cheers, > Piotr > > Od: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> w imieniu użytkownika Piotr Łobacz via lists.openembedded.org <p.lobacz=welotec.com@lists.openembedded.org> > Wysłane: niedziela, 23 lipca 2023 17:53 > Do: Alexandre Belloni <alexandre.belloni@bootlin.com> > DW: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> > Temat: ODP: ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr > > Hi, > > > Hello, > > > > On 22/07/2023 21:03:43+0000, Piotr Łobacz wrote: > > > Hello Alexadre, > > > this time everything should be fixed and working :D I have tested it thrice:P > > > > > > Additionally I've discovered that somehow, during all these patchsets, an extra param "--numeric-owner" has gone from opkg-build script, > > > which is important to store uid(s)/gid(s) as numbers instead of names in tar archive. An updated patch has been already pushed to opkg-utils > > > upstream. > > > > > > You can run it and tell if everything is OK. > > > > > > > This ran and mostly worked. The remaining issue is the reproducibility > > issue: > > I'm glad that we went further in this problem, but > > https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fautobuilder.yocto.io%2Fpub%2Frepro-fail%2Foe-reproducible-20230722-1a1a_7s6%2F&data=05%7C01%7Cp.lobacz%40welotec.com%7C51dd1d7467324ac969b308db8bcb7ad6%7C25111a7f1d5a4c51a4ca7f8e44011b39%7C0%7C0%7C638257478278865450%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=YVG%2FJi2GxHwFsiUXfavP7E2csBVZqlBdhHievqSXIeU%3D&reserved=0<https://autobuilder.yocto.io/pub/repro-fail/oe-reproducible-20230722-1a1a_7s6/> > > > Unfortunately, diffoscope is not running on that large set. > > unfortunately I don't have knowledge what's this link about. Can you explain me a little bit and how is this being run from cli? > > > BR > > Piotr > > > > > > Od: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> w imieniu użytkownika Piotr Łobacz via lists.openembedded.org <p.lobacz=welotec.com@lists.openembedded.org> > > Wysłane: sobota, 22 lipca 2023 22:55 > > Do: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> > > DW: Piotr Łobacz <p.lobacz@welotec.com> > > Temat: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr > > > > Extend OPKGBUILDCMD variable, with additional parameters, depending > > on target distro features, in order to support ACLs and xattr. > > > > With fix pushed to the opkg-devel: > > https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.google.com%2Fg%2Fopkg-devel%2Fc%2FdYNHrLjDwg8&data=05%7C01%7Cp.lobacz%40welotec.com%7C51dd1d7467324ac969b308db8bcb7ad6%7C25111a7f1d5a4c51a4ca7f8e44011b39%7C0%7C0%7C638257478278865450%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=yMHEGByP9mdHE7TVlx8embVuXdqZeVlk%2BcUcIu8dwNI%3D&reserved=0<https://groups.google.com/g/opkg-devel/c/dYNHrLjDwg8> > > opkg-build is able to create tar archives with ACLs and xattr. > > > > Signed-off-by: Piotr Łobacz <p.lobacz@welotec.com> > > --- > > meta/classes-global/package_ipk.bbclass | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/meta/classes-global/package_ipk.bbclass b/meta/classes-global/package_ipk.bbclass > > index b4b7bc9ac2..a0f106e4ad 100644 > > --- a/meta/classes-global/package_ipk.bbclass > > +++ b/meta/classes-global/package_ipk.bbclass > > @@ -15,7 +15,7 @@ IPKGCONF_SDK_TARGET = "${WORKDIR}/opkg-sdk-target.conf" > > PKGWRITEDIRIPK = "${WORKDIR}/deploy-ipks" > > > > # Program to be used to build opkg packages > > -OPKGBUILDCMD ??= 'opkg-build -Z xz -a "${XZ_DEFAULTS}"' > > +OPKGBUILDCMD ??= 'opkg-build -Z xz -a "${XZ_DEFAULTS}" ${@bb.utils.contains('DISTRO_FEATURES', 'acl', '-A', '', d)} ${@bb.utils.contains('DISTRO_FEATURES', 'xattr', '-X', '', d)}' > > > > OPKG_ARGS += "--force_postinstall --prefer-arch-to-version" > > OPKG_ARGS += "${@['', '--no-install-recommends'][d.getVar("NO_RECOMMENDATIONS") == "1"]}" > > -- > > 2.34.1 > > > > > > > > > > -- > Alexandre Belloni, co-owner and COO, Bootlin > Embedded Linux and Kernel engineering > https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbootlin.com%2F&data=05%7C01%7Cp.lobacz%40welotec.com%7C51dd1d7467324ac969b308db8bcb7ad6%7C25111a7f1d5a4c51a4ca7f8e44011b39%7C0%7C0%7C638257478278865450%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=6%2By9Umym57B4b3VZloHOo9CgfGD%2BUexNqfGxtfeIoNA%3D&reserved=0<https://bootlin.com/> > > -=-=-=-=-=-=-=-=-=-=-=- > Links: You receive all messages sent to this group. > View/Reply Online (#184761): https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.openembedded.org%2Fg%2Fopenembedded-core%2Fmessage%2F184761&data=05%7C01%7Cp.lobacz%40welotec.com%7C51dd1d7467324ac969b308db8bcb7ad6%7C25111a7f1d5a4c51a4ca7f8e44011b39%7C0%7C0%7C638257478278865450%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=SYXdJ8dve90A6x8BY5ZD0BvEhYGt5k3fuQeN9Fc7HQs%3D&reserved=0<https://lists.openembedded.org/g/openembedded-core/message/184761> > Mute This Topic: https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.openembedded.org%2Fmt%2F100313731%2F3617179&data=05%7C01%7Cp.lobacz%40welotec.com%7C51dd1d7467324ac969b308db8bcb7ad6%7C25111a7f1d5a4c51a4ca7f8e44011b39%7C0%7C0%7C638257478278865450%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=dDMSyaOwoS2iYTerBSaaJJbZP%2BjdwyOvCJStDrPEmS4%3D&reserved=0<https://lists.openembedded.org/mt/100313731/3617179> > Group Owner: openembedded-core+owner@lists.openembedded.org > Unsubscribe: https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.openembedded.org%2Fg%2Fopenembedded-core%2Funsub&data=05%7C01%7Cp.lobacz%40welotec.com%7C51dd1d7467324ac969b308db8bcb7ad6%7C25111a7f1d5a4c51a4ca7f8e44011b39%7C0%7C0%7C638257478278865450%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=guMVOu35BzphIon5DP%2FJ9whcOMyFanYapzoUcbkgyPk%3D&reserved=0<https://lists.openembedded.org/g/openembedded-core/unsub> [alexandre.belloni@bootlin.com] > -=-=-=-=-=-=-=-=-=-=-=- > -- Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel engineering https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbootlin.com%2F&data=05%7C01%7Cp.lobacz%40welotec.com%7C51dd1d7467324ac969b308db8bcb7ad6%7C25111a7f1d5a4c51a4ca7f8e44011b39%7C0%7C0%7C638257478278865450%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=6%2By9Umym57B4b3VZloHOo9CgfGD%2BUexNqfGxtfeIoNA%3D&reserved=0<https://bootlin.com/> [-- Attachment #2: Type: text/html, Size: 38196 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <1774A1B0E65BDA10.25264@lists.openembedded.org>]
* ODP: ODP: ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr [not found] ` <1774A1B0E65BDA10.25264@lists.openembedded.org> @ 2023-07-24 9:36 ` Piotr Łobacz 0 siblings, 0 replies; 7+ messages in thread From: Piotr Łobacz @ 2023-07-24 9:36 UTC (permalink / raw) To: Alexandre Belloni, Alex Stewart, Piotr Łobacz Cc: openembedded-core@lists.openembedded.org [-- Attachment #1: Type: text/plain, Size: 24287 bytes --] OK, I have done some testings and confirmed that for posix format, tar does not care about mtime parameter and need to investigate on how to fix it... With gnu format everything is working fine:D but than acls and xattrs are not supported. BR Piotr ________________________________ Od: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> w imieniu użytkownika Piotr Łobacz via lists.openembedded.org <p.lobacz=welotec.com@lists.openembedded.org> Wysłane: poniedziałek, 24 lipca 2023 01:05 Do: Alexandre Belloni <alexandre.belloni@bootlin.com>; Alex Stewart <alex.stewart@ni.com> DW: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> Temat: ODP: ODP: ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr Hi, on your advice I have taken the first package and run diffoscope which has given me such result: plobacz@latitude:~/workspace/reproducible$ diffoscope A/a52dec-doc_0.7.4-r4_core2-64.ipk B/a52dec-doc_0.7.4-r4_core2-64.ipk --- A/a52dec-doc_0.7.4-r4_core2-64.ipk +++ B/a52dec-doc_0.7.4-r4_core2-64.ipk ├── file list │ @@ -1,3 +1,3 @@ │ ?rw-r--r-- 0 0 0 4 1970-01-01 00:00:00.000000 debian-binary │ -?rw-r--r-- 0 0 0 504 1970-01-01 00:00:00.000000 control.tar.gz │ -?rw-r--r-- 0 0 0 1236 1970-01-01 00:00:00.000000 data.tar.xz │ +?rw-r--r-- 0 0 0 503 1970-01-01 00:00:00.000000 control.tar.gz │ +?rw-r--r-- 0 0 0 1240 1970-01-01 00:00:00.000000 data.tar.xz ├── control.tar.gz │ ├── control.tar │ │┄ Format-specific differences are supported for tape archives (.tar) but no file-specific differences were detected; falling back to a binary diff. file(1) reports: POSIX tar archive │ │ @@ -26,18 +26,18 @@ │ │ 00000190: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00000200: 3330 2061 7469 6d65 3d31 3639 3030 3733 30 atime=1690073 │ │ -00000210: 3231 352e 3839 3835 3637 3730 310a 3330 215.898567701.30 │ │ -00000220: 2063 7469 6d65 3d31 3639 3030 3733 3231 ctime=169007321 │ │ -00000230: 352e 3631 3735 3635 3337 350a 0000 0000 5.617565375..... │ │ +00000200: 3330 2061 7469 6d65 3d31 3639 3030 3831 30 atime=1690081 │ │ +00000210: 3433 312e 3335 3033 3137 3933 340a 3330 431.350317934.30 │ │ +00000220: 2063 7469 6d65 3d31 3639 3030 3831 3433 ctime=169008143 │ │ +00000230: 312e 3133 3633 3136 3136 350a 0000 0000 1.136316165..... │ │ 00000240: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000250: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000260: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000270: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000280: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000290: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000002a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ ├── data.tar.xz │ ├── data.tar │ │┄ Format-specific differences are supported for this file format but no file-specific differences were detected; falling back to a binary diff. file(1) reports: POSIX tar archive │ │ @@ -26,18 +26,18 @@ │ │ 00000190: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000001f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00000200: 3330 2061 7469 6d65 3d31 3639 3030 3732 30 atime=1690072 │ │ -00000210: 3132 332e 3039 3835 3135 3131 330a 3330 123.098515113.30 │ │ -00000220: 2063 7469 6d65 3d31 3639 3030 3730 3136 ctime=169007016 │ │ -00000230: 322e 3634 3134 3832 3935 380a 0000 0000 2.641482958..... │ │ +00000200: 3330 2061 7469 6d65 3d31 3639 3030 3737 30 atime=1690077 │ │ +00000210: 3336 362e 3735 3039 3333 3932 310a 3330 366.750933921.30 │ │ +00000220: 2063 7469 6d65 3d31 3639 3030 3737 3336 ctime=169007736 │ │ +00000230: 362e 3639 3139 3333 3433 330a 0000 0000 6.691933433..... │ │ 00000240: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000250: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000260: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000270: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000280: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000290: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000002a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ @@ -122,18 +122,18 @@ │ │ 00000790: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000007a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000007b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000007c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000007d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000007e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000007f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00000800: 3330 2061 7469 6d65 3d31 3639 3030 3732 30 atime=1690072 │ │ -00000810: 3132 332e 3039 3835 3135 3131 330a 3330 123.098515113.30 │ │ -00000820: 2063 7469 6d65 3d31 3639 3030 3730 3136 ctime=169007016 │ │ -00000830: 322e 3634 3134 3832 3935 380a 0000 0000 2.641482958..... │ │ +00000800: 3330 2061 7469 6d65 3d31 3639 3030 3737 30 atime=1690077 │ │ +00000810: 3336 362e 3735 3039 3333 3932 310a 3330 366.750933921.30 │ │ +00000820: 2063 7469 6d65 3d31 3639 3030 3737 3336 ctime=169007736 │ │ +00000830: 362e 3639 3139 3333 3433 330a 0000 0000 6.691933433..... │ │ 00000840: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000850: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000860: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000870: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000880: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000890: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000008a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ @@ -218,18 +218,18 @@ │ │ 00000d90: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000da0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000db0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000dc0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000dd0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000de0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000df0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00000e00: 3330 2061 7469 6d65 3d31 3639 3030 3732 30 atime=1690072 │ │ -00000e10: 3132 332e 3039 3935 3135 3132 320a 3330 123.099515122.30 │ │ -00000e20: 2063 7469 6d65 3d31 3639 3030 3730 3136 ctime=169007016 │ │ -00000e30: 322e 3634 3134 3832 3935 380a 0000 0000 2.641482958..... │ │ +00000e00: 3330 2061 7469 6d65 3d31 3639 3030 3737 30 atime=1690077 │ │ +00000e10: 3336 362e 3639 3239 3333 3434 310a 3330 366.692933441.30 │ │ +00000e20: 2063 7469 6d65 3d31 3639 3030 3737 3336 ctime=169007736 │ │ +00000e30: 362e 3639 3139 3333 3433 330a 0000 0000 6.691933433..... │ │ 00000e40: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000e50: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000e60: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000e70: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000e80: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000e90: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00000ea0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ @@ -314,18 +314,18 @@ │ │ 00001390: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000013a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000013b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000013c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000013d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000013e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000013f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00001400: 3330 2061 7469 6d65 3d31 3639 3030 3732 30 atime=1690072 │ │ -00001410: 3132 332e 3039 3935 3135 3132 320a 3330 123.099515122.30 │ │ -00001420: 2063 7469 6d65 3d31 3639 3030 3730 3136 ctime=169007016 │ │ -00001430: 322e 3634 3134 3832 3935 380a 0000 0000 2.641482958..... │ │ +00001400: 3330 2061 7469 6d65 3d31 3639 3030 3737 30 atime=1690077 │ │ +00001410: 3336 362e 3735 3139 3333 3932 390a 3330 366.751933929.30 │ │ +00001420: 2063 7469 6d65 3d31 3639 3030 3737 3336 ctime=169007736 │ │ +00001430: 362e 3639 3239 3333 3434 310a 0000 0000 6.692933441..... │ │ 00001440: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001450: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001460: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001470: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001480: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001490: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000014a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ @@ -386,16 +386,16 @@ │ │ 00001810: 6d61 6e31 2f50 6178 4865 6164 6572 732f man1/PaxHeaders/ │ │ 00001820: 6135 3264 6563 2e31 0000 0000 0000 0000 a52dec.1........ │ │ 00001830: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001840: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001850: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001860: 0000 0000 3030 3030 3634 3400 3030 3030 ....0000644.0000 │ │ 00001870: 3030 3000 3030 3030 3030 3000 3030 3030 000.0000000.0000 │ │ -00001880: 3030 3030 3037 3300 3037 3532 3036 3635 0000073.07520665 │ │ -00001890: 3034 3100 3031 3437 3531 0020 7800 0000 041.014751. x... │ │ +00001880: 3030 3030 3037 3200 3037 3532 3036 3635 0000072.07520665 │ │ +00001890: 3034 3100 3031 3437 3530 0020 7800 0000 041.014750. x... │ │ 000018a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000018b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000018c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000018d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000018e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000018f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001900: 0075 7374 6172 0030 3000 0000 0000 0000 .ustar.00....... │ │ @@ -410,18 +410,18 @@ │ │ 00001990: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000019a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000019b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000019c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000019d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000019e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000019f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00001a00: 3330 2061 7469 6d65 3d31 3639 3030 3732 30 atime=1690072 │ │ -00001a10: 3132 332e 3134 3435 3135 3439 330a 3239 123.144515493.29 │ │ -00001a20: 2063 7469 6d65 3d31 3639 3030 3730 3136 ctime=169007016 │ │ -00001a30: 322e 3634 3034 3832 3935 0a00 0000 0000 2.64048295...... │ │ +00001a00: 3330 2061 7469 6d65 3d31 3639 3030 3737 30 atime=1690077 │ │ +00001a10: 3336 362e 3737 3939 3334 3136 310a 3238 366.779934161.28 │ │ +00001a20: 2063 7469 6d65 3d31 3639 3030 3737 3336 ctime=169007736 │ │ +00001a30: 362e 3637 3539 3333 330a 0000 0000 0000 6.6759333....... │ │ 00001a40: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001a50: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001a60: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001a70: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001a80: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001a90: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00001aa0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ @@ -578,16 +578,16 @@ │ │ 00002410: 6d61 6e31 2f50 6178 4865 6164 6572 732f man1/PaxHeaders/ │ │ 00002420: 6578 7472 6163 745f 6135 322e 3100 0000 extract_a52.1... │ │ 00002430: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002440: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002450: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002460: 0000 0000 3030 3030 3634 3400 3030 3030 ....0000644.0000 │ │ 00002470: 3030 3000 3030 3030 3030 3000 3030 3030 000.0000000.0000 │ │ -00002480: 3030 3030 3037 3300 3037 3532 3036 3635 0000073.07520665 │ │ -00002490: 3034 3100 3031 3630 3237 0020 7800 0000 041.016027. x... │ │ +00002480: 3030 3030 3037 3200 3037 3532 3036 3635 0000072.07520665 │ │ +00002490: 3034 3100 3031 3630 3236 0020 7800 0000 041.016026. x... │ │ 000024a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000024b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000024c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000024d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000024e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000024f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002500: 0075 7374 6172 0030 3000 0000 0000 0000 .ustar.00....... │ │ @@ -602,18 +602,18 @@ │ │ 00002590: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000025a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000025b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000025c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000025d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000025e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000025f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ -00002600: 3330 2061 7469 6d65 3d31 3639 3030 3732 30 atime=1690072 │ │ -00002610: 3132 332e 3134 3835 3135 3532 360a 3239 123.148515526.29 │ │ -00002620: 2063 7469 6d65 3d31 3639 3030 3730 3136 ctime=169007016 │ │ -00002630: 322e 3634 3034 3832 3935 0a00 0000 0000 2.64048295...... │ │ +00002600: 3330 2061 7469 6d65 3d31 3639 3030 3737 30 atime=1690077 │ │ +00002610: 3336 362e 3738 3039 3334 3136 390a 3238 366.780934169.28 │ │ +00002620: 2063 7469 6d65 3d31 3639 3030 3737 3336 ctime=169007736 │ │ +00002630: 362e 3637 3539 3333 330a 0000 0000 0000 6.6759333....... │ │ 00002640: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002650: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002660: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002670: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002680: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 00002690: 0000 0000 0000 0000 0000 0000 0000 0000 ................ │ │ 000026a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................ Then, again another first best package which occurred to be openssl_3.1.1-r0_core2-64.ipk and also the same issue. The difference between atime and ctime... So, in principle the only difference is the date of creation. I have my suspicions that probably due to the usage of posix format for tar command in opkg-build script these dates differes, but I need to investigate it and maybe consult it with tar developers. BR Piotr ________________________________ Od: Alexandre Belloni <alexandre.belloni@bootlin.com> Wysłane: poniedziałek, 24 lipca 2023 00:23 Do: Piotr Łobacz <p.lobacz@welotec.com> DW: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> Temat: Re: ODP: ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr On 23/07/2023 16:32:55+0000, Piotr Łobacz wrote: > OK, I got it, but correct me if I'm wrong, namely packages differs between builds? > > I have found this link https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdocs.yoctoproject.org%2Fdev%2Ftest-manual%2Freproducible-builds.html&data=05%7C01%7Cp.lobacz%40welotec.com%7C51dd1d7467324ac969b308db8bcb7ad6%7C25111a7f1d5a4c51a4ca7f8e44011b39%7C0%7C0%7C638257478278865450%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=ZKFRDOAbZeeVezYGVUislVmmeJWSCuYq%2BKc6m1KNDhE%3D&reserved=0<https://docs.yoctoproject.org/dev/test-manual/reproducible-builds.html> for it with instructions > on how to reproduce it. I'll give it a try and In case of problems will try to ask. > You will find the packages that differ in reproducibleA and reproducibleB so you can compare them yourself. > Cheers, > Piotr > > Od: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> w imieniu użytkownika Piotr Łobacz via lists.openembedded.org <p.lobacz=welotec.com@lists.openembedded.org> > Wysłane: niedziela, 23 lipca 2023 17:53 > Do: Alexandre Belloni <alexandre.belloni@bootlin.com> > DW: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> > Temat: ODP: ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr > > Hi, > > > Hello, > > > > On 22/07/2023 21:03:43+0000, Piotr Łobacz wrote: > > > Hello Alexadre, > > > this time everything should be fixed and working :D I have tested it thrice:P > > > > > > Additionally I've discovered that somehow, during all these patchsets, an extra param "--numeric-owner" has gone from opkg-build script, > > > which is important to store uid(s)/gid(s) as numbers instead of names in tar archive. An updated patch has been already pushed to opkg-utils > > > upstream. > > > > > > You can run it and tell if everything is OK. > > > > > > > This ran and mostly worked. The remaining issue is the reproducibility > > issue: > > I'm glad that we went further in this problem, but > > https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fautobuilder.yocto.io%2Fpub%2Frepro-fail%2Foe-reproducible-20230722-1a1a_7s6%2F&data=05%7C01%7Cp.lobacz%40welotec.com%7C51dd1d7467324ac969b308db8bcb7ad6%7C25111a7f1d5a4c51a4ca7f8e44011b39%7C0%7C0%7C638257478278865450%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=YVG%2FJi2GxHwFsiUXfavP7E2csBVZqlBdhHievqSXIeU%3D&reserved=0<https://autobuilder.yocto.io/pub/repro-fail/oe-reproducible-20230722-1a1a_7s6/> > > > Unfortunately, diffoscope is not running on that large set. > > unfortunately I don't have knowledge what's this link about. Can you explain me a little bit and how is this being run from cli? > > > BR > > Piotr > > > > > > Od: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> w imieniu użytkownika Piotr Łobacz via lists.openembedded.org <p.lobacz=welotec.com@lists.openembedded.org> > > Wysłane: sobota, 22 lipca 2023 22:55 > > Do: openembedded-core@lists.openembedded.org <openembedded-core@lists.openembedded.org> > > DW: Piotr Łobacz <p.lobacz@welotec.com> > > Temat: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr > > > > Extend OPKGBUILDCMD variable, with additional parameters, depending > > on target distro features, in order to support ACLs and xattr. > > > > With fix pushed to the opkg-devel: > > https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.google.com%2Fg%2Fopkg-devel%2Fc%2FdYNHrLjDwg8&data=05%7C01%7Cp.lobacz%40welotec.com%7C51dd1d7467324ac969b308db8bcb7ad6%7C25111a7f1d5a4c51a4ca7f8e44011b39%7C0%7C0%7C638257478278865450%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=yMHEGByP9mdHE7TVlx8embVuXdqZeVlk%2BcUcIu8dwNI%3D&reserved=0<https://groups.google.com/g/opkg-devel/c/dYNHrLjDwg8> > > opkg-build is able to create tar archives with ACLs and xattr. > > > > Signed-off-by: Piotr Łobacz <p.lobacz@welotec.com> > > --- > > meta/classes-global/package_ipk.bbclass | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/meta/classes-global/package_ipk.bbclass b/meta/classes-global/package_ipk.bbclass > > index b4b7bc9ac2..a0f106e4ad 100644 > > --- a/meta/classes-global/package_ipk.bbclass > > +++ b/meta/classes-global/package_ipk.bbclass > > @@ -15,7 +15,7 @@ IPKGCONF_SDK_TARGET = "${WORKDIR}/opkg-sdk-target.conf" > > PKGWRITEDIRIPK = "${WORKDIR}/deploy-ipks" > > > > # Program to be used to build opkg packages > > -OPKGBUILDCMD ??= 'opkg-build -Z xz -a "${XZ_DEFAULTS}"' > > +OPKGBUILDCMD ??= 'opkg-build -Z xz -a "${XZ_DEFAULTS}" ${@bb.utils.contains('DISTRO_FEATURES', 'acl', '-A', '', d)} ${@bb.utils.contains('DISTRO_FEATURES', 'xattr', '-X', '', d)}' > > > > OPKG_ARGS += "--force_postinstall --prefer-arch-to-version" > > OPKG_ARGS += "${@['', '--no-install-recommends'][d.getVar("NO_RECOMMENDATIONS") == "1"]}" > > -- > > 2.34.1 > > > > > > > > > > -- > Alexandre Belloni, co-owner and COO, Bootlin > Embedded Linux and Kernel engineering > https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbootlin.com%2F&data=05%7C01%7Cp.lobacz%40welotec.com%7C51dd1d7467324ac969b308db8bcb7ad6%7C25111a7f1d5a4c51a4ca7f8e44011b39%7C0%7C0%7C638257478278865450%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=6%2By9Umym57B4b3VZloHOo9CgfGD%2BUexNqfGxtfeIoNA%3D&reserved=0<https://bootlin.com/> > > > -- Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel engineering https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbootlin.com%2F&data=05%7C01%7Cp.lobacz%40welotec.com%7C51dd1d7467324ac969b308db8bcb7ad6%7C25111a7f1d5a4c51a4ca7f8e44011b39%7C0%7C0%7C638257478278865450%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=6%2By9Umym57B4b3VZloHOo9CgfGD%2BUexNqfGxtfeIoNA%3D&reserved=0<https://bootlin.com/> [-- Attachment #2: Type: text/html, Size: 40006 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2023-07-24 9:36 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <17744C0B55ADA271.25264@lists.openembedded.org>
2023-07-22 21:03 ` ODP: [OE-Core][PATCH v8][master-next 1/5] package_ipk.bbclass: add support for ACLs and xattr Piotr Łobacz
2023-07-23 15:04 ` Alexandre Belloni
2023-07-23 15:53 ` ODP: " Piotr Łobacz
[not found] ` <17748A1F3FBBC488.4774@lists.openembedded.org>
2023-07-23 16:32 ` Piotr Łobacz
2023-07-23 22:23 ` Alexandre Belloni
2023-07-23 23:05 ` ODP: " Piotr Łobacz
[not found] ` <1774A1B0E65BDA10.25264@lists.openembedded.org>
2023-07-24 9:36 ` Piotr Łobacz
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox