* [PATCH 09/21] gettext-minimal-native: obtain the needed files directly from gettext source tarball
2023-07-27 14:36 [PATCH 01/21] meta: add missing summaries for image recipes Alexander Kanavin
` (6 preceding siblings ...)
2023-07-27 14:36 ` [PATCH 08/21] gnu-efi: upgrade 3.0.15 -> 3.0.17 Alexander Kanavin
@ 2023-07-27 14:36 ` Alexander Kanavin
2023-07-27 14:36 ` [PATCH 10/21] kbd: upgrade 2.6.0 -> 2.6.1 Alexander Kanavin
` (11 subsequent siblings)
19 siblings, 0 replies; 35+ messages in thread
From: Alexander Kanavin @ 2023-07-27 14:36 UTC (permalink / raw)
To: openembedded-core; +Cc: Alexander Kanavin
None of the files are generated, and so there is no need to carry them
in oe-core (which greatly complicates gettext version updates, for one thing).
Let's simply copy them over directly from the tarball; as the set of installed .m4
files can and does change over time, obtain them with a python scriptlet from Makefile.am
where they are listed.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
---
.../gettext-minimal-0.21.1/Makefile.in.in | 510 -----------
.../gettext-minimal-0.21.1/aclocal/gettext.m4 | 386 ---------
.../aclocal/host-cpu-c-abi.m4 | 678 ---------------
.../gettext-minimal-0.21.1/aclocal/iconv.m4 | 283 ------
.../aclocal/intlmacosx.m4 | 65 --
.../gettext-minimal-0.21.1/aclocal/lib-ld.m4 | 168 ----
.../aclocal/lib-link.m4 | 813 ------------------
.../aclocal/lib-prefix.m4 | 323 -------
.../gettext-minimal-0.21.1/aclocal/nls.m4 | 32 -
.../gettext-minimal-0.21.1/aclocal/po.m4 | 454 ----------
.../aclocal/progtest.m4 | 91 --
.../gettext-minimal-0.21.1/config.rpath | 684 ---------------
.../remove-potcdate.sin | 25 -
.../gettext/gettext-minimal-native_0.21.1.bb | 36 +-
meta/recipes-core/gettext/gettext-sources.inc | 4 +
meta/recipes-core/gettext/gettext_0.21.1.bb | 6 +-
16 files changed, 33 insertions(+), 4525 deletions(-)
delete mode 100644 meta/recipes-core/gettext/gettext-minimal-0.21.1/Makefile.in.in
delete mode 100644 meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/gettext.m4
delete mode 100644 meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/host-cpu-c-abi.m4
delete mode 100644 meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/iconv.m4
delete mode 100644 meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/intlmacosx.m4
delete mode 100644 meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/lib-ld.m4
delete mode 100644 meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/lib-link.m4
delete mode 100644 meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/lib-prefix.m4
delete mode 100644 meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/nls.m4
delete mode 100644 meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/po.m4
delete mode 100644 meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/progtest.m4
delete mode 100755 meta/recipes-core/gettext/gettext-minimal-0.21.1/config.rpath
delete mode 100644 meta/recipes-core/gettext/gettext-minimal-0.21.1/remove-potcdate.sin
create mode 100644 meta/recipes-core/gettext/gettext-sources.inc
diff --git a/meta/recipes-core/gettext/gettext-minimal-0.21.1/Makefile.in.in b/meta/recipes-core/gettext/gettext-minimal-0.21.1/Makefile.in.in
deleted file mode 100644
index 6b25f0d9167..00000000000
--- a/meta/recipes-core/gettext/gettext-minimal-0.21.1/Makefile.in.in
+++ /dev/null
@@ -1,510 +0,0 @@
-# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-2000 Ulrich Drepper <drepper@gnu.ai.mit.edu>
-# Copyright (C) 2000-2020 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved. This file is offered as-is,
-# without any warranty.
-#
-# Origin: gettext-0.21
-GETTEXT_MACRO_VERSION = 0.20
-
-PACKAGE = @PACKAGE@
-VERSION = @VERSION@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-
-SED = @SED@
-SHELL = /bin/sh
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-datarootdir = @datarootdir@
-datadir = @datadir@
-localedir = @localedir@
-gettextsrcdir = $(datadir)/gettext/po
-
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-
-# We use $(mkdir_p).
-# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
-# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
-# @install_sh@ does not start with $(SHELL), so we add it.
-# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
-# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
-# versions, $(mkinstalldirs) and $(install_sh) are unused.
-mkinstalldirs = $(SHELL) @install_sh@ -d
-install_sh = $(SHELL) @install_sh@
-MKDIR_P = @MKDIR_P@
-mkdir_p = @mkdir_p@
-
-# When building gettext-tools, we prefer to use the built programs
-# rather than installed programs. However, we can't do that when we
-# are cross compiling.
-CROSS_COMPILING = @CROSS_COMPILING@
-
-GMSGFMT_ = @GMSGFMT@
-GMSGFMT_no = @GMSGFMT@
-GMSGFMT_yes = @GMSGFMT_015@
-GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
-XGETTEXT_ = @XGETTEXT@
-XGETTEXT_no = @XGETTEXT@
-XGETTEXT_yes = @XGETTEXT_015@
-XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
-MSGMERGE = @MSGMERGE@
-MSGMERGE_UPDATE = @MSGMERGE@ --update
-MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
-MSGINIT = msginit
-MSGCONV = msgconv
-MSGFILTER = msgfilter
-
-POFILES = @POFILES@
-GMOFILES = @GMOFILES@
-UPDATEPOFILES = @UPDATEPOFILES@
-DUMMYPOFILES = @DUMMYPOFILES@
-DISTFILES.common = Makefile.in.in remove-potcdate.sin \
-$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
-$(POFILES) $(GMOFILES) \
-$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
-
-POTFILES = \
-
-CATALOGS = @CATALOGS@
-
-POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
-POFILESDEPS_yes = $(POFILESDEPS_)
-POFILESDEPS_no =
-POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))
-
-DISTFILESDEPS_ = update-po
-DISTFILESDEPS_yes = $(DISTFILESDEPS_)
-DISTFILESDEPS_no =
-DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))
-
-# Makevars gets inserted here. (Don't remove this line!)
-
-all: all-@USE_NLS@
-
-
-.SUFFIXES:
-.SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update
-
-# The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs.
-# The GNU Coding Standards say in
-# <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>:
-# "GNU distributions usually contain some files which are not source files
-# ... . Since these files normally appear in the source directory, they
-# should always appear in the source directory, not in the build directory.
-# So Makefile rules to update them should put the updated files in the
-# source directory."
-# Therefore we put these files in the source directory, not the build directory.
-
-# During .po -> .gmo conversion, take into account the most recent changes to
-# the .pot file. This eliminates the need to update the .po files when the
-# .pot file has changed, which would be troublesome if the .po files are put
-# under version control.
-$(GMOFILES): $(srcdir)/$(DOMAIN).pot
-.po.gmo:
- @lang=`echo $* | sed -e 's,.*/,,'`; \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \
- cd $(srcdir) && \
- rm -f $${lang}.gmo && \
- $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \
- $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \
- mv t-$${lang}.gmo $${lang}.gmo && \
- rm -f $${lang}.1po
-
-.sin.sed:
- sed -e '/^#/d' $< > t-$@
- mv t-$@ $@
-
-
-all-yes: $(srcdir)/stamp-po
-all-no:
-
-# Ensure that the gettext macros and this Makefile.in.in are in sync.
-CHECK_MACRO_VERSION = \
- test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
- || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
- exit 1; \
- }
-
-# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
-# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
-# we don't want to bother translators with empty POT files). We assume that
-# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
-# In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target).
-
-# $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS
-# have been loosely updated. Its purpose is that when a developer or translator
-# checks out the package from a version control system, and the $(DOMAIN).pot
-# file is not under version control, "make" will update the $(DOMAIN).pot and
-# the $(CATALOGS), but subsequent invocations of "make" will do nothing. This
-# timestamp would not be necessary if updating the $(CATALOGS) would always
-# touch them; however, the rule for $(POFILES) has been designed to not touch
-# files that don't need to be changed.
-$(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot
- @$(CHECK_MACRO_VERSION)
- test ! -f $(srcdir)/$(DOMAIN).pot || \
- test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
- @test ! -f $(srcdir)/$(DOMAIN).pot || { \
- echo "touch $(srcdir)/stamp-po" && \
- echo timestamp > $(srcdir)/stamp-poT && \
- mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \
- }
-
-# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
-# otherwise packages like GCC can not be built if only parts of the source
-# have been downloaded.
-
-# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
-# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
-# The determination of whether the package xyz is a GNU one is based on the
-# heuristic whether some file in the top level directory mentions "GNU xyz".
-# If GNU 'find' is available, we avoid grepping through monster files.
-$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
- package_gnu="$(PACKAGE_GNU)"; \
- test -n "$$package_gnu" || { \
- if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
- LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU @PACKAGE@' /dev/null '{}' ';' 2>/dev/null; \
- else \
- LC_ALL=C grep -i 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \
- fi; \
- } | grep -v 'libtool:' >/dev/null; then \
- package_gnu=yes; \
- else \
- package_gnu=no; \
- fi; \
- }; \
- if test "$$package_gnu" = "yes"; then \
- package_prefix='GNU '; \
- else \
- package_prefix=''; \
- fi; \
- if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
- msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
- else \
- msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
- fi; \
- case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
- $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
- --add-comments=TRANSLATORS: \
- --files-from=$(srcdir)/POTFILES.in \
- --copyright-holder='$(COPYRIGHT_HOLDER)' \
- --msgid-bugs-address="$$msgid_bugs_address" \
- $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
- ;; \
- *) \
- $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
- --add-comments=TRANSLATORS: \
- --files-from=$(srcdir)/POTFILES.in \
- --copyright-holder='$(COPYRIGHT_HOLDER)' \
- --package-name="$${package_prefix}@PACKAGE@" \
- --package-version='@VERSION@' \
- --msgid-bugs-address="$$msgid_bugs_address" \
- $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
- ;; \
- esac
- test ! -f $(DOMAIN).po || { \
- if test -f $(srcdir)/$(DOMAIN).pot-header; then \
- sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \
- cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \
- rm -f $(DOMAIN).1po \
- || exit 1; \
- fi; \
- if test -f $(srcdir)/$(DOMAIN).pot; then \
- sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
- sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
- if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
- rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
- else \
- rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
- mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
- fi; \
- else \
- mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
- fi; \
- }
-
-# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
-# every "make" invocation, only create it when it is missing.
-# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
-$(srcdir)/$(DOMAIN).pot:
- $(MAKE) $(DOMAIN).pot-update
-
-# This target rebuilds a PO file if $(DOMAIN).pot has changed.
-# Note that a PO file is not touched if it doesn't need to be changed.
-$(POFILES): $(POFILESDEPS)
- @test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot
- @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
- if test -f "$(srcdir)/$${lang}.po"; then \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \
- cd $(srcdir) \
- && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
- $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
- 0.1[6-7] | 0.1[6-7].*) \
- $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \
- *) \
- $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \
- esac; \
- }; \
- else \
- $(MAKE) $${lang}.po-create; \
- fi
-
-
-install: install-exec install-data
-install-exec:
-install-data: install-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
- for file in $(DISTFILES.common) Makevars.template; do \
- $(INSTALL_DATA) $(srcdir)/$$file \
- $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- for file in Makevars; do \
- rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- else \
- : ; \
- fi
-install-data-no: all
-install-data-yes: all
- @catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- dir=$(localedir)/$$lang/LC_MESSAGES; \
- $(mkdir_p) $(DESTDIR)$$dir; \
- if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
- $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
- echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
- for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
- if test -n "$$lc"; then \
- if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
- link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
- mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
- for file in *; do \
- if test -f $$file; then \
- ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
- fi; \
- done); \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- else \
- if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
- :; \
- else \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- fi; \
- fi; \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
- ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
- cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
- fi; \
- done; \
- done
-
-install-strip: install
-
-installdirs: installdirs-exec installdirs-data
-installdirs-exec:
-installdirs-data: installdirs-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
- else \
- : ; \
- fi
-installdirs-data-no:
-installdirs-data-yes:
- @catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- dir=$(localedir)/$$lang/LC_MESSAGES; \
- $(mkdir_p) $(DESTDIR)$$dir; \
- for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
- if test -n "$$lc"; then \
- if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
- link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
- mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
- for file in *; do \
- if test -f $$file; then \
- ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
- fi; \
- done); \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- else \
- if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
- :; \
- else \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- fi; \
- fi; \
- fi; \
- done; \
- done
-
-# Define this as empty until I found a useful application.
-installcheck:
-
-uninstall: uninstall-exec uninstall-data
-uninstall-exec:
-uninstall-data: uninstall-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- for file in $(DISTFILES.common) Makevars.template; do \
- rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- else \
- : ; \
- fi
-uninstall-data-no:
-uninstall-data-yes:
- catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- done; \
- done
-
-check: all
-
-info dvi ps pdf html tags TAGS ctags CTAGS ID:
-
-install-dvi install-ps install-pdf install-html:
-
-mostlyclean:
- rm -f remove-potcdate.sed
- rm -f $(srcdir)/stamp-poT
- rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
- rm -fr *.o
-
-clean: mostlyclean
-
-distclean: clean
- rm -f Makefile Makefile.in POTFILES
-
-maintainer-clean: distclean
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
- rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES)
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir:
- test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS)
- @$(MAKE) dist2
-# This is a separate target because 'update-po' must be executed before.
-dist2: $(srcdir)/stamp-po $(DISTFILES)
- @dists="$(DISTFILES)"; \
- if test "$(PACKAGE)" = "gettext-tools"; then \
- dists="$$dists Makevars.template"; \
- fi; \
- if test -f $(srcdir)/$(DOMAIN).pot; then \
- dists="$$dists $(DOMAIN).pot stamp-po"; \
- else \
- case $(XGETTEXT) in \
- :) echo "Warning: Creating a tarball without '$(DOMAIN).pot', because a suitable 'xgettext' program was not found in PATH." 1>&2;; \
- *) echo "Warning: Creating a tarball without '$(DOMAIN).pot', because 'xgettext' found no strings to extract. Check the contents of the POTFILES.in file and the XGETTEXT_OPTIONS in the Makevars file." 1>&2;; \
- esac; \
- fi; \
- if test -f $(srcdir)/ChangeLog; then \
- dists="$$dists ChangeLog"; \
- fi; \
- for i in 0 1 2 3 4 5 6 7 8 9; do \
- if test -f $(srcdir)/ChangeLog.$$i; then \
- dists="$$dists ChangeLog.$$i"; \
- fi; \
- done; \
- if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
- for file in $$dists; do \
- if test -f $$file; then \
- cp -p $$file $(distdir) || exit 1; \
- else \
- cp -p $(srcdir)/$$file $(distdir) || exit 1; \
- fi; \
- done
-
-update-po: Makefile
- $(MAKE) $(DOMAIN).pot-update
- test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
- $(MAKE) update-gmo
-
-# General rule for creating PO files.
-
-.nop.po-create:
- @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
- echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
- exit 1
-
-# General rule for updating PO files.
-
-.nop.po-update:
- @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
- if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \
- tmpdir=`pwd`; \
- echo "$$lang:"; \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
- cd $(srcdir); \
- if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
- $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
- 0.1[6-7] | 0.1[6-7].*) \
- $(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
- *) \
- $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
- esac; \
- }; then \
- if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
- rm -f $$tmpdir/$$lang.new.po; \
- else \
- if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
- :; \
- else \
- echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
- exit 1; \
- fi; \
- fi; \
- else \
- echo "msgmerge for $$lang.po failed!" 1>&2; \
- rm -f $$tmpdir/$$lang.new.po; \
- fi
-
-$(DUMMYPOFILES):
-
-update-gmo: Makefile $(GMOFILES)
- @:
-
-# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
-# because execution permission bits may not work on the current file system.
-# Use @SHELL@, which is the shell determined by autoconf for the use by its
-# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
-Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
- cd $(top_builddir) \
- && @SHELL@ ./config.status $(subdir)/$@.in po-directories
-
-force:
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/gettext.m4 b/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/gettext.m4
deleted file mode 100644
index f4492405bd2..00000000000
--- a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/gettext.m4
+++ /dev/null
@@ -1,386 +0,0 @@
-# gettext.m4 serial 72 (gettext-0.21.1)
-dnl Copyright (C) 1995-2014, 2016, 2018-2020 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Lesser General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Lesser General Public License, and the rest of the GNU
-dnl gettext package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2006, 2008-2010.
-
-dnl Macro to add for using GNU gettext.
-
-dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
-dnl INTLSYMBOL must be one of 'external', 'use-libtool'.
-dnl INTLSYMBOL should be 'external' for packages other than GNU gettext, and
-dnl 'use-libtool' for the packages 'gettext-runtime' and 'gettext-tools'.
-dnl If INTLSYMBOL is 'use-libtool', then a libtool library
-dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
-dnl depending on --{enable,disable}-{shared,static} and on the presence of
-dnl AM-DISABLE-SHARED).
-dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
-dnl implementations (in libc or libintl) without the ngettext() function
-dnl will be ignored. If NEEDSYMBOL is specified and is
-dnl 'need-formatstring-macros', then GNU gettext implementations that don't
-dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
-dnl INTLDIR is used to find the intl libraries. If empty,
-dnl the value '$(top_builddir)/intl/' is used.
-dnl
-dnl The result of the configuration is one of three cases:
-dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
-dnl and used.
-dnl Catalog format: GNU --> install in $(datadir)
-dnl Catalog extension: .mo after installation, .gmo in source tree
-dnl 2) GNU gettext has been found in the system's C library.
-dnl Catalog format: GNU --> install in $(datadir)
-dnl Catalog extension: .mo after installation, .gmo in source tree
-dnl 3) No internationalization, always use English msgid.
-dnl Catalog format: none
-dnl Catalog extension: none
-dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
-dnl The use of .gmo is historical (it was needed to avoid overwriting the
-dnl GNU format catalogs when building on a platform with an X/Open gettext),
-dnl but we keep it in order not to force irrelevant filename changes on the
-dnl maintainers.
-dnl
-AC_DEFUN([AM_GNU_GETTEXT],
-[
- dnl Argument checking.
- m4_if([$1], [], , [m4_if([$1], [external], , [m4_if([$1], [use-libtool], ,
- [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
-])])])])
- m4_if(m4_if([$1], [], [old])[]m4_if([$1], [no-libtool], [old]), [old],
- [errprint([ERROR: Use of AM_GNU_GETTEXT without [external] argument is no longer supported.
-])])
- m4_if([$2], [], , [m4_if([$2], [need-ngettext], , [m4_if([$2], [need-formatstring-macros], ,
- [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
-])])])])
- define([gt_included_intl],
- m4_if([$1], [external], [no], [yes]))
- gt_NEEDS_INIT
- AM_GNU_GETTEXT_NEED([$2])
-
- AC_REQUIRE([AM_PO_SUBDIRS])dnl
- m4_if(gt_included_intl, yes, [
- AC_REQUIRE([AM_INTL_SUBDIR])dnl
- ])
-
- dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
-
- dnl Sometimes libintl requires libiconv, so first search for libiconv.
- dnl Ideally we would do this search only after the
- dnl if test "$USE_NLS" = "yes"; then
- dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
- dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
- dnl the configure script would need to contain the same shell code
- dnl again, outside any 'if'. There are two solutions:
- dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
- dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
- dnl Since AC_PROVIDE_IFELSE is not documented, we avoid it.
- m4_if(gt_included_intl, yes, , [
- AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
- ])
-
- dnl Sometimes, on Mac OS X, libintl requires linking with CoreFoundation.
- gt_INTL_MACOSX
-
- dnl Set USE_NLS.
- AC_REQUIRE([AM_NLS])
-
- m4_if(gt_included_intl, yes, [
- BUILD_INCLUDED_LIBINTL=no
- USE_INCLUDED_LIBINTL=no
- ])
- LIBINTL=
- LTLIBINTL=
- POSUB=
-
- dnl Add a version number to the cache macros.
- case " $gt_needs " in
- *" need-formatstring-macros "*) gt_api_version=3 ;;
- *" need-ngettext "*) gt_api_version=2 ;;
- *) gt_api_version=1 ;;
- esac
- gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
- gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
-
- dnl If we use NLS figure out what method
- if test "$USE_NLS" = "yes"; then
- gt_use_preinstalled_gnugettext=no
- m4_if(gt_included_intl, yes, [
- AC_MSG_CHECKING([whether included gettext is requested])
- AC_ARG_WITH([included-gettext],
- [ --with-included-gettext use the GNU gettext library included here],
- nls_cv_force_use_gnu_gettext=$withval,
- nls_cv_force_use_gnu_gettext=no)
- AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext])
-
- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- ])
- dnl User does not insist on using GNU NLS library. Figure out what
- dnl to use. If GNU gettext is available we use this. Else we have
- dnl to fall back to GNU NLS library.
-
- if test $gt_api_version -ge 3; then
- gt_revision_test_code='
-#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
-#endif
-changequote(,)dnl
-typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
-changequote([,])dnl
-'
- else
- gt_revision_test_code=
- fi
- if test $gt_api_version -ge 2; then
- gt_expression_test_code=' + * ngettext ("", "", 0)'
- else
- gt_expression_test_code=
- fi
-
- AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc],
- [AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <libintl.h>
-#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-extern int _nl_msg_cat_cntr;
-extern int *_nl_domain_bindings;
-#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings)
-#else
-#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
-#endif
-$gt_revision_test_code
- ]],
- [[
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
- ]])],
- [eval "$gt_func_gnugettext_libc=yes"],
- [eval "$gt_func_gnugettext_libc=no"])])
-
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
- dnl Sometimes libintl requires libiconv, so first search for libiconv.
- m4_if(gt_included_intl, yes, , [
- AM_ICONV_LINK
- ])
- dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
- dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
- dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
- dnl even if libiconv doesn't exist.
- AC_LIB_LINKFLAGS_BODY([intl])
- AC_CACHE_CHECK([for GNU gettext in libintl],
- [$gt_func_gnugettext_libintl],
- [gt_save_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="$CPPFLAGS $INCINTL"
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBINTL"
- dnl Now see whether libintl exists and does not depend on libiconv.
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <libintl.h>
-#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);
-#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias (""))
-#else
-#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
-#endif
-$gt_revision_test_code
- ]],
- [[
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
- ]])],
- [eval "$gt_func_gnugettext_libintl=yes"],
- [eval "$gt_func_gnugettext_libintl=no"])
- dnl Now see whether libintl exists and depends on libiconv.
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
- LIBS="$LIBS $LIBICONV"
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <libintl.h>
-#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);
-#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias (""))
-#else
-#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
-#endif
-$gt_revision_test_code
- ]],
- [[
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
- ]])],
- [LIBINTL="$LIBINTL $LIBICONV"
- LTLIBINTL="$LTLIBINTL $LTLIBICONV"
- eval "$gt_func_gnugettext_libintl=yes"
- ])
- fi
- CPPFLAGS="$gt_save_CPPFLAGS"
- LIBS="$gt_save_LIBS"])
- fi
-
- dnl If an already present or preinstalled GNU gettext() is found,
- dnl use it. But if this macro is used in GNU gettext, and GNU
- dnl gettext is already preinstalled in libintl, we update this
- dnl libintl. (Cf. the install rule in intl/Makefile.in.)
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
- || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
- && test "$PACKAGE" != gettext-runtime \
- && test "$PACKAGE" != gettext-tools; }; then
- gt_use_preinstalled_gnugettext=yes
- else
- dnl Reset the values set by searching for libintl.
- LIBINTL=
- LTLIBINTL=
- INCINTL=
- fi
-
- m4_if(gt_included_intl, yes, [
- if test "$gt_use_preinstalled_gnugettext" != "yes"; then
- dnl GNU gettext is not found in the C library.
- dnl Fall back on included GNU gettext library.
- nls_cv_use_gnu_gettext=yes
- fi
- fi
-
- if test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions used to generate GNU NLS library.
- BUILD_INCLUDED_LIBINTL=yes
- USE_INCLUDED_LIBINTL=yes
- LIBINTL="m4_if([$3],[],\${top_builddir}/intl,[$3])/libintl.la $LIBICONV $LIBTHREAD"
- LTLIBINTL="m4_if([$3],[],\${top_builddir}/intl,[$3])/libintl.la $LTLIBICONV $LTLIBTHREAD"
- LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
- fi
-
- CATOBJEXT=
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions to use GNU gettext tools.
- CATOBJEXT=.gmo
- fi
- ])
-
- if test -n "$INTL_MACOSX_LIBS"; then
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Some extra flags are needed during linking.
- LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
- LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
- fi
- fi
-
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- AC_DEFINE([ENABLE_NLS], [1],
- [Define to 1 if translation of program messages to the user's native language
- is requested.])
- else
- USE_NLS=no
- fi
- fi
-
- AC_MSG_CHECKING([whether to use NLS])
- AC_MSG_RESULT([$USE_NLS])
- if test "$USE_NLS" = "yes"; then
- AC_MSG_CHECKING([where the gettext function comes from])
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- gt_source="external libintl"
- else
- gt_source="libc"
- fi
- else
- gt_source="included intl directory"
- fi
- AC_MSG_RESULT([$gt_source])
- fi
-
- if test "$USE_NLS" = "yes"; then
-
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- AC_MSG_CHECKING([how to link with libintl])
- AC_MSG_RESULT([$LIBINTL])
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
- fi
-
- dnl For backward compatibility. Some packages may be using this.
- AC_DEFINE([HAVE_GETTEXT], [1],
- [Define if the GNU gettext() function is already present or preinstalled.])
- AC_DEFINE([HAVE_DCGETTEXT], [1],
- [Define if the GNU dcgettext() function is already present or preinstalled.])
- fi
-
- dnl We need to process the po/ directory.
- POSUB=po
- fi
-
- m4_if(gt_included_intl, yes, [
- dnl In GNU gettext we have to set BUILD_INCLUDED_LIBINTL to 'yes'
- dnl because some of the testsuite requires it.
- BUILD_INCLUDED_LIBINTL=yes
-
- dnl Make all variables we use known to autoconf.
- AC_SUBST([BUILD_INCLUDED_LIBINTL])
- AC_SUBST([USE_INCLUDED_LIBINTL])
- AC_SUBST([CATOBJEXT])
- ])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- INTLLIBS="$LIBINTL"
- AC_SUBST([INTLLIBS])
-
- dnl Make all documented variables known to autoconf.
- AC_SUBST([LIBINTL])
- AC_SUBST([LTLIBINTL])
- AC_SUBST([POSUB])
-])
-
-
-dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized.
-m4_define([gt_NEEDS_INIT],
-[
- m4_divert_text([DEFAULTS], [gt_needs=])
- m4_define([gt_NEEDS_INIT], [])
-])
-
-
-dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL])
-AC_DEFUN([AM_GNU_GETTEXT_NEED],
-[
- m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"])
-])
-
-
-dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
-AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
-
-
-dnl Usage: AM_GNU_GETTEXT_REQUIRE_VERSION([gettext-version])
-AC_DEFUN([AM_GNU_GETTEXT_REQUIRE_VERSION], [])
diff --git a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/host-cpu-c-abi.m4 b/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/host-cpu-c-abi.m4
deleted file mode 100644
index b9223241b43..00000000000
--- a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/host-cpu-c-abi.m4
+++ /dev/null
@@ -1,678 +0,0 @@
-# host-cpu-c-abi.m4 serial 15
-dnl Copyright (C) 2002-2022 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible and Sam Steingold.
-
-dnl Sets the HOST_CPU variable to the canonical name of the CPU.
-dnl Sets the HOST_CPU_C_ABI variable to the canonical name of the CPU with its
-dnl C language ABI (application binary interface).
-dnl Also defines __${HOST_CPU}__ and __${HOST_CPU_C_ABI}__ as C macros in
-dnl config.h.
-dnl
-dnl This canonical name can be used to select a particular assembly language
-dnl source file that will interoperate with C code on the given host.
-dnl
-dnl For example:
-dnl * 'i386' and 'sparc' are different canonical names, because code for i386
-dnl will not run on SPARC CPUs and vice versa. They have different
-dnl instruction sets.
-dnl * 'sparc' and 'sparc64' are different canonical names, because code for
-dnl 'sparc' and code for 'sparc64' cannot be linked together: 'sparc' code
-dnl contains 32-bit instructions, whereas 'sparc64' code contains 64-bit
-dnl instructions. A process on a SPARC CPU can be in 32-bit mode or in 64-bit
-dnl mode, but not both.
-dnl * 'mips' and 'mipsn32' are different canonical names, because they use
-dnl different argument passing and return conventions for C functions, and
-dnl although the instruction set of 'mips' is a large subset of the
-dnl instruction set of 'mipsn32'.
-dnl * 'mipsn32' and 'mips64' are different canonical names, because they use
-dnl different sizes for the C types like 'int' and 'void *', and although
-dnl the instruction sets of 'mipsn32' and 'mips64' are the same.
-dnl * The same canonical name is used for different endiannesses. You can
-dnl determine the endianness through preprocessor symbols:
-dnl - 'arm': test __ARMEL__.
-dnl - 'mips', 'mipsn32', 'mips64': test _MIPSEB vs. _MIPSEL.
-dnl - 'powerpc64': test _BIG_ENDIAN vs. _LITTLE_ENDIAN.
-dnl * The same name 'i386' is used for CPUs of type i386, i486, i586
-dnl (Pentium), AMD K7, Pentium II, Pentium IV, etc., because
-dnl - Instructions that do not exist on all of these CPUs (cmpxchg,
-dnl MMX, SSE, SSE2, 3DNow! etc.) are not frequently used. If your
-dnl assembly language source files use such instructions, you will
-dnl need to make the distinction.
-dnl - Speed of execution of the common instruction set is reasonable across
-dnl the entire family of CPUs. If you have assembly language source files
-dnl that are optimized for particular CPU types (like GNU gmp has), you
-dnl will need to make the distinction.
-dnl See <https://en.wikipedia.org/wiki/X86_instruction_listings>.
-AC_DEFUN([gl_HOST_CPU_C_ABI],
-[
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([gl_C_ASM])
- AC_CACHE_CHECK([host CPU and C ABI], [gl_cv_host_cpu_c_abi],
- [case "$host_cpu" in
-
-changequote(,)dnl
- i[34567]86 )
-changequote([,])dnl
- gl_cv_host_cpu_c_abi=i386
- ;;
-
- x86_64 )
- # On x86_64 systems, the C compiler may be generating code in one of
- # these ABIs:
- # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64.
- # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64
- # with native Windows (mingw, MSVC).
- # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32.
- # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if (defined __x86_64__ || defined __amd64__ \
- || defined _M_X64 || defined _M_AMD64)
- int ok;
- #else
- error fail
- #endif
- ]])],
- [AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __ILP32__ || defined _ILP32
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi=x86_64-x32],
- [gl_cv_host_cpu_c_abi=x86_64])],
- [gl_cv_host_cpu_c_abi=i386])
- ;;
-
-changequote(,)dnl
- alphaev[4-8] | alphaev56 | alphapca5[67] | alphaev6[78] )
-changequote([,])dnl
- gl_cv_host_cpu_c_abi=alpha
- ;;
-
- arm* | aarch64 )
- # Assume arm with EABI.
- # On arm64 systems, the C compiler may be generating code in one of
- # these ABIs:
- # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64.
- # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32.
- # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#ifdef __aarch64__
- int ok;
- #else
- error fail
- #endif
- ]])],
- [AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __ILP32__ || defined _ILP32
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi=arm64-ilp32],
- [gl_cv_host_cpu_c_abi=arm64])],
- [# Don't distinguish little-endian and big-endian arm, since they
- # don't require different machine code for simple operations and
- # since the user can distinguish them through the preprocessor
- # defines __ARMEL__ vs. __ARMEB__.
- # But distinguish arm which passes floating-point arguments and
- # return values in integer registers (r0, r1, ...) - this is
- # gcc -mfloat-abi=soft or gcc -mfloat-abi=softfp - from arm which
- # passes them in float registers (s0, s1, ...) and double registers
- # (d0, d1, ...) - this is gcc -mfloat-abi=hard. GCC 4.6 or newer
- # sets the preprocessor defines __ARM_PCS (for the first case) and
- # __ARM_PCS_VFP (for the second case), but older GCC does not.
- echo 'double ddd; void func (double dd) { ddd = dd; }' > conftest.c
- # Look for a reference to the register d0 in the .s file.
- AC_TRY_COMMAND(${CC-cc} $CFLAGS $CPPFLAGS $gl_c_asm_opt conftest.c) >/dev/null 2>&1
- if LC_ALL=C grep 'd0,' conftest.$gl_asmext >/dev/null; then
- gl_cv_host_cpu_c_abi=armhf
- else
- gl_cv_host_cpu_c_abi=arm
- fi
- rm -f conftest*
- ])
- ;;
-
- hppa1.0 | hppa1.1 | hppa2.0* | hppa64 )
- # On hppa, the C compiler may be generating 32-bit code or 64-bit
- # code. In the latter case, it defines _LP64 and __LP64__.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#ifdef __LP64__
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi=hppa64],
- [gl_cv_host_cpu_c_abi=hppa])
- ;;
-
- ia64* )
- # On ia64 on HP-UX, the C compiler may be generating 64-bit code or
- # 32-bit code. In the latter case, it defines _ILP32.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#ifdef _ILP32
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi=ia64-ilp32],
- [gl_cv_host_cpu_c_abi=ia64])
- ;;
-
- mips* )
- # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this
- # at 32.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64)
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi=mips64],
- [# In the n32 ABI, _ABIN32 is defined, _ABIO32 is not defined (but
- # may later get defined by <sgidefs.h>), and _MIPS_SIM == _ABIN32.
- # In the 32 ABI, _ABIO32 is defined, _ABIN32 is not defined (but
- # may later get defined by <sgidefs.h>), and _MIPS_SIM == _ABIO32.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if (_MIPS_SIM == _ABIN32)
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi=mipsn32],
- [gl_cv_host_cpu_c_abi=mips])])
- ;;
-
- powerpc* )
- # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD.
- # No need to distinguish them here; the caller may distinguish
- # them based on the OS.
- # On powerpc64 systems, the C compiler may still be generating
- # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may
- # be generating 64-bit code.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __powerpc64__ || defined __LP64__
- int ok;
- #else
- error fail
- #endif
- ]])],
- [# On powerpc64, there are two ABIs on Linux: The AIX compatible
- # one and the ELFv2 one. The latter defines _CALL_ELF=2.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined _CALL_ELF && _CALL_ELF == 2
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi=powerpc64-elfv2],
- [gl_cv_host_cpu_c_abi=powerpc64])
- ],
- [gl_cv_host_cpu_c_abi=powerpc])
- ;;
-
- rs6000 )
- gl_cv_host_cpu_c_abi=powerpc
- ;;
-
- riscv32 | riscv64 )
- # There are 2 architectures (with variants): rv32* and rv64*.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if __riscv_xlen == 64
- int ok;
- #else
- error fail
- #endif
- ]])],
- [cpu=riscv64],
- [cpu=riscv32])
- # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d.
- # Size of 'long' and 'void *':
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __LP64__
- int ok;
- #else
- error fail
- #endif
- ]])],
- [main_abi=lp64],
- [main_abi=ilp32])
- # Float ABIs:
- # __riscv_float_abi_double:
- # 'float' and 'double' are passed in floating-point registers.
- # __riscv_float_abi_single:
- # 'float' are passed in floating-point registers.
- # __riscv_float_abi_soft:
- # No values are passed in floating-point registers.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __riscv_float_abi_double
- int ok;
- #else
- error fail
- #endif
- ]])],
- [float_abi=d],
- [AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __riscv_float_abi_single
- int ok;
- #else
- error fail
- #endif
- ]])],
- [float_abi=f],
- [float_abi=''])
- ])
- gl_cv_host_cpu_c_abi="${cpu}-${main_abi}${float_abi}"
- ;;
-
- s390* )
- # On s390x, the C compiler may be generating 64-bit (= s390x) code
- # or 31-bit (= s390) code.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __LP64__ || defined __s390x__
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi=s390x],
- [gl_cv_host_cpu_c_abi=s390])
- ;;
-
- sparc | sparc64 )
- # UltraSPARCs running Linux have `uname -m` = "sparc64", but the
- # C compiler still generates 32-bit code.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __sparcv9 || defined __arch64__
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi=sparc64],
- [gl_cv_host_cpu_c_abi=sparc])
- ;;
-
- *)
- gl_cv_host_cpu_c_abi="$host_cpu"
- ;;
- esac
- ])
-
- dnl In most cases, $HOST_CPU and $HOST_CPU_C_ABI are the same.
- HOST_CPU=`echo "$gl_cv_host_cpu_c_abi" | sed -e 's/-.*//'`
- HOST_CPU_C_ABI="$gl_cv_host_cpu_c_abi"
- AC_SUBST([HOST_CPU])
- AC_SUBST([HOST_CPU_C_ABI])
-
- # This was
- # AC_DEFINE_UNQUOTED([__${HOST_CPU}__])
- # AC_DEFINE_UNQUOTED([__${HOST_CPU_C_ABI}__])
- # earlier, but KAI C++ 3.2d doesn't like this.
- sed -e 's/-/_/g' >> confdefs.h <<EOF
-#ifndef __${HOST_CPU}__
-#define __${HOST_CPU}__ 1
-#endif
-#ifndef __${HOST_CPU_C_ABI}__
-#define __${HOST_CPU_C_ABI}__ 1
-#endif
-EOF
- AH_TOP([/* CPU and C ABI indicator */
-#ifndef __i386__
-#undef __i386__
-#endif
-#ifndef __x86_64_x32__
-#undef __x86_64_x32__
-#endif
-#ifndef __x86_64__
-#undef __x86_64__
-#endif
-#ifndef __alpha__
-#undef __alpha__
-#endif
-#ifndef __arm__
-#undef __arm__
-#endif
-#ifndef __armhf__
-#undef __armhf__
-#endif
-#ifndef __arm64_ilp32__
-#undef __arm64_ilp32__
-#endif
-#ifndef __arm64__
-#undef __arm64__
-#endif
-#ifndef __hppa__
-#undef __hppa__
-#endif
-#ifndef __hppa64__
-#undef __hppa64__
-#endif
-#ifndef __ia64_ilp32__
-#undef __ia64_ilp32__
-#endif
-#ifndef __ia64__
-#undef __ia64__
-#endif
-#ifndef __loongarch64__
-#undef __loongarch64__
-#endif
-#ifndef __m68k__
-#undef __m68k__
-#endif
-#ifndef __mips__
-#undef __mips__
-#endif
-#ifndef __mipsn32__
-#undef __mipsn32__
-#endif
-#ifndef __mips64__
-#undef __mips64__
-#endif
-#ifndef __powerpc__
-#undef __powerpc__
-#endif
-#ifndef __powerpc64__
-#undef __powerpc64__
-#endif
-#ifndef __powerpc64_elfv2__
-#undef __powerpc64_elfv2__
-#endif
-#ifndef __riscv32__
-#undef __riscv32__
-#endif
-#ifndef __riscv64__
-#undef __riscv64__
-#endif
-#ifndef __riscv32_ilp32__
-#undef __riscv32_ilp32__
-#endif
-#ifndef __riscv32_ilp32f__
-#undef __riscv32_ilp32f__
-#endif
-#ifndef __riscv32_ilp32d__
-#undef __riscv32_ilp32d__
-#endif
-#ifndef __riscv64_ilp32__
-#undef __riscv64_ilp32__
-#endif
-#ifndef __riscv64_ilp32f__
-#undef __riscv64_ilp32f__
-#endif
-#ifndef __riscv64_ilp32d__
-#undef __riscv64_ilp32d__
-#endif
-#ifndef __riscv64_lp64__
-#undef __riscv64_lp64__
-#endif
-#ifndef __riscv64_lp64f__
-#undef __riscv64_lp64f__
-#endif
-#ifndef __riscv64_lp64d__
-#undef __riscv64_lp64d__
-#endif
-#ifndef __s390__
-#undef __s390__
-#endif
-#ifndef __s390x__
-#undef __s390x__
-#endif
-#ifndef __sh__
-#undef __sh__
-#endif
-#ifndef __sparc__
-#undef __sparc__
-#endif
-#ifndef __sparc64__
-#undef __sparc64__
-#endif
-])
-
-])
-
-
-dnl Sets the HOST_CPU_C_ABI_32BIT variable to 'yes' if the C language ABI
-dnl (application binary interface) is a 32-bit one, to 'no' if it is a 64-bit
-dnl one, or to 'unknown' if unknown.
-dnl This is a simplified variant of gl_HOST_CPU_C_ABI.
-AC_DEFUN([gl_HOST_CPU_C_ABI_32BIT],
-[
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_CACHE_CHECK([32-bit host C ABI], [gl_cv_host_cpu_c_abi_32bit],
- [if test -n "$gl_cv_host_cpu_c_abi"; then
- case "$gl_cv_host_cpu_c_abi" in
- i386 | x86_64-x32 | arm | armhf | arm64-ilp32 | hppa | ia64-ilp32 | mips | mipsn32 | powerpc | riscv*-ilp32* | s390 | sparc)
- gl_cv_host_cpu_c_abi_32bit=yes ;;
- x86_64 | alpha | arm64 | hppa64 | ia64 | mips64 | powerpc64 | powerpc64-elfv2 | riscv*-lp64* | s390x | sparc64 )
- gl_cv_host_cpu_c_abi_32bit=no ;;
- *)
- gl_cv_host_cpu_c_abi_32bit=unknown ;;
- esac
- else
- case "$host_cpu" in
-
- # CPUs that only support a 32-bit ABI.
- arc \
- | bfin \
- | cris* \
- | csky \
- | epiphany \
- | ft32 \
- | h8300 \
- | m68k \
- | microblaze | microblazeel \
- | nds32 | nds32le | nds32be \
- | nios2 | nios2eb | nios2el \
- | or1k* \
- | or32 \
- | sh | sh[1234] | sh[1234]e[lb] \
- | tic6x \
- | xtensa* )
- gl_cv_host_cpu_c_abi_32bit=yes
- ;;
-
- # CPUs that only support a 64-bit ABI.
-changequote(,)dnl
- alpha | alphaev[4-8] | alphaev56 | alphapca5[67] | alphaev6[78] \
- | mmix )
-changequote([,])dnl
- gl_cv_host_cpu_c_abi_32bit=no
- ;;
-
-changequote(,)dnl
- i[34567]86 )
-changequote([,])dnl
- gl_cv_host_cpu_c_abi_32bit=yes
- ;;
-
- x86_64 )
- # On x86_64 systems, the C compiler may be generating code in one of
- # these ABIs:
- # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64.
- # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64
- # with native Windows (mingw, MSVC).
- # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32.
- # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if (defined __x86_64__ || defined __amd64__ \
- || defined _M_X64 || defined _M_AMD64) \
- && !(defined __ILP32__ || defined _ILP32)
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi_32bit=no],
- [gl_cv_host_cpu_c_abi_32bit=yes])
- ;;
-
- arm* | aarch64 )
- # Assume arm with EABI.
- # On arm64 systems, the C compiler may be generating code in one of
- # these ABIs:
- # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64.
- # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32.
- # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __aarch64__ && !(defined __ILP32__ || defined _ILP32)
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi_32bit=no],
- [gl_cv_host_cpu_c_abi_32bit=yes])
- ;;
-
- hppa1.0 | hppa1.1 | hppa2.0* | hppa64 )
- # On hppa, the C compiler may be generating 32-bit code or 64-bit
- # code. In the latter case, it defines _LP64 and __LP64__.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#ifdef __LP64__
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi_32bit=no],
- [gl_cv_host_cpu_c_abi_32bit=yes])
- ;;
-
- ia64* )
- # On ia64 on HP-UX, the C compiler may be generating 64-bit code or
- # 32-bit code. In the latter case, it defines _ILP32.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#ifdef _ILP32
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi_32bit=yes],
- [gl_cv_host_cpu_c_abi_32bit=no])
- ;;
-
- mips* )
- # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this
- # at 32.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64)
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi_32bit=no],
- [gl_cv_host_cpu_c_abi_32bit=yes])
- ;;
-
- powerpc* )
- # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD.
- # No need to distinguish them here; the caller may distinguish
- # them based on the OS.
- # On powerpc64 systems, the C compiler may still be generating
- # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may
- # be generating 64-bit code.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __powerpc64__ || defined __LP64__
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi_32bit=no],
- [gl_cv_host_cpu_c_abi_32bit=yes])
- ;;
-
- rs6000 )
- gl_cv_host_cpu_c_abi_32bit=yes
- ;;
-
- riscv32 | riscv64 )
- # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d.
- # Size of 'long' and 'void *':
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __LP64__
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi_32bit=no],
- [gl_cv_host_cpu_c_abi_32bit=yes])
- ;;
-
- s390* )
- # On s390x, the C compiler may be generating 64-bit (= s390x) code
- # or 31-bit (= s390) code.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __LP64__ || defined __s390x__
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi_32bit=no],
- [gl_cv_host_cpu_c_abi_32bit=yes])
- ;;
-
- sparc | sparc64 )
- # UltraSPARCs running Linux have `uname -m` = "sparc64", but the
- # C compiler still generates 32-bit code.
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __sparcv9 || defined __arch64__
- int ok;
- #else
- error fail
- #endif
- ]])],
- [gl_cv_host_cpu_c_abi_32bit=no],
- [gl_cv_host_cpu_c_abi_32bit=yes])
- ;;
-
- *)
- gl_cv_host_cpu_c_abi_32bit=unknown
- ;;
- esac
- fi
- ])
-
- HOST_CPU_C_ABI_32BIT="$gl_cv_host_cpu_c_abi_32bit"
-])
diff --git a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/iconv.m4 b/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/iconv.m4
deleted file mode 100644
index 00057953e33..00000000000
--- a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/iconv.m4
+++ /dev/null
@@ -1,283 +0,0 @@
-# iconv.m4 serial 24
-dnl Copyright (C) 2000-2002, 2007-2014, 2016-2022 Free Software Foundation,
-dnl Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_PREREQ([2.64])
-
-dnl Note: AM_ICONV is documented in the GNU gettext manual
-dnl <https://www.gnu.org/software/gettext/manual/html_node/AM_005fICONV.html>.
-dnl Don't make changes that are incompatible with that documentation!
-
-AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
-[
- dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
-
- dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([iconv])
-])
-
-AC_DEFUN([AM_ICONV_LINK],
-[
- dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
- dnl those with the standalone portable GNU libiconv installed).
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
-
- dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
- dnl accordingly.
- AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
-
- dnl Add $INCICONV to CPPFLAGS before performing the following checks,
- dnl because if the user has installed libiconv and not disabled its use
- dnl via --without-libiconv-prefix, he wants to use it. The first
- dnl AC_LINK_IFELSE will then fail, the second AC_LINK_IFELSE will succeed.
- am_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
-
- AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <stdlib.h>
-#include <iconv.h>
- ]],
- [[iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);]])],
- [am_cv_func_iconv=yes])
- if test "$am_cv_func_iconv" != yes; then
- am_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBICONV"
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <stdlib.h>
-#include <iconv.h>
- ]],
- [[iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);]])],
- [am_cv_lib_iconv=yes]
- [am_cv_func_iconv=yes])
- LIBS="$am_save_LIBS"
- fi
- ])
- if test "$am_cv_func_iconv" = yes; then
- AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [
- dnl This tests against bugs in AIX 5.1, AIX 6.1..7.1, HP-UX 11.11,
- dnl Solaris 10.
- am_save_LIBS="$LIBS"
- if test $am_cv_lib_iconv = yes; then
- LIBS="$LIBS $LIBICONV"
- fi
- am_cv_func_iconv_works=no
- for ac_iconv_const in '' 'const'; do
- AC_RUN_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <iconv.h>
-#include <string.h>
-
-#ifndef ICONV_CONST
-# define ICONV_CONST $ac_iconv_const
-#endif
- ]],
- [[int result = 0;
- /* Test against AIX 5.1...7.2 bug: Failures are not distinguishable from
- successful returns. This is even documented in
- <https://www.ibm.com/support/knowledgecenter/ssw_aix_72/i_bostechref/iconv.html> */
- {
- iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
- if (cd_utf8_to_88591 != (iconv_t)(-1))
- {
- static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */
- char buf[10];
- ICONV_CONST char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_utf8_to_88591,
- &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- result |= 1;
- iconv_close (cd_utf8_to_88591);
- }
- }
- /* Test against Solaris 10 bug: Failures are not distinguishable from
- successful returns. */
- {
- iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
- if (cd_ascii_to_88591 != (iconv_t)(-1))
- {
- static ICONV_CONST char input[] = "\263";
- char buf[10];
- ICONV_CONST char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_ascii_to_88591,
- &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- result |= 2;
- iconv_close (cd_ascii_to_88591);
- }
- }
- /* Test against AIX 6.1..7.1 bug: Buffer overrun. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static ICONV_CONST char input[] = "\304";
- static char buf[2] = { (char)0xDE, (char)0xAD };
- ICONV_CONST char *inptr = input;
- size_t inbytesleft = 1;
- char *outptr = buf;
- size_t outbytesleft = 1;
- size_t res = iconv (cd_88591_to_utf8,
- &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD)
- result |= 4;
- iconv_close (cd_88591_to_utf8);
- }
- }
-#if 0 /* This bug could be worked around by the caller. */
- /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
- char buf[50];
- ICONV_CONST char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_88591_to_utf8,
- &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if ((int)res > 0)
- result |= 8;
- iconv_close (cd_88591_to_utf8);
- }
- }
-#endif
- /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
- provided. */
- {
- /* Try standardized names. */
- iconv_t cd1 = iconv_open ("UTF-8", "EUC-JP");
- /* Try IRIX, OSF/1 names. */
- iconv_t cd2 = iconv_open ("UTF-8", "eucJP");
- /* Try AIX names. */
- iconv_t cd3 = iconv_open ("UTF-8", "IBM-eucJP");
- /* Try HP-UX names. */
- iconv_t cd4 = iconv_open ("utf8", "eucJP");
- if (cd1 == (iconv_t)(-1) && cd2 == (iconv_t)(-1)
- && cd3 == (iconv_t)(-1) && cd4 == (iconv_t)(-1))
- result |= 16;
- if (cd1 != (iconv_t)(-1))
- iconv_close (cd1);
- if (cd2 != (iconv_t)(-1))
- iconv_close (cd2);
- if (cd3 != (iconv_t)(-1))
- iconv_close (cd3);
- if (cd4 != (iconv_t)(-1))
- iconv_close (cd4);
- }
- return result;
-]])],
- [am_cv_func_iconv_works=yes], ,
- [case "$host_os" in
- aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
- *) am_cv_func_iconv_works="guessing yes" ;;
- esac])
- test "$am_cv_func_iconv_works" = no || break
- done
- LIBS="$am_save_LIBS"
- ])
- case "$am_cv_func_iconv_works" in
- *no) am_func_iconv=no am_cv_lib_iconv=no ;;
- *) am_func_iconv=yes ;;
- esac
- else
- am_func_iconv=no am_cv_lib_iconv=no
- fi
- if test "$am_func_iconv" = yes; then
- AC_DEFINE([HAVE_ICONV], [1],
- [Define if you have the iconv() function and it works.])
- fi
- if test "$am_cv_lib_iconv" = yes; then
- AC_MSG_CHECKING([how to link with libiconv])
- AC_MSG_RESULT([$LIBICONV])
- else
- dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
- dnl either.
- CPPFLAGS="$am_save_CPPFLAGS"
- LIBICONV=
- LTLIBICONV=
- fi
- AC_SUBST([LIBICONV])
- AC_SUBST([LTLIBICONV])
-])
-
-dnl Define AM_ICONV using AC_DEFUN_ONCE, in order to avoid warnings like
-dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required".
-dnl This is tricky because of the way 'aclocal' is implemented:
-dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN.
-dnl Otherwise aclocal's initial scan pass would miss the macro definition.
-dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions.
-dnl Otherwise aclocal would emit many "Use of uninitialized value $1"
-dnl warnings.
-AC_DEFUN_ONCE([AM_ICONV],
-[
- AM_ICONV_LINK
- if test "$am_cv_func_iconv" = yes; then
- AC_CACHE_CHECK([whether iconv is compatible with its POSIX signature],
- [gl_cv_iconv_nonconst],
- [AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <stdlib.h>
-#include <iconv.h>
-extern
-#ifdef __cplusplus
-"C"
-#endif
-size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
- ]],
- [[]])],
- [gl_cv_iconv_nonconst=yes],
- [gl_cv_iconv_nonconst=no])
- ])
- else
- dnl When compiling GNU libiconv on a system that does not have iconv yet,
- dnl pick the POSIX compliant declaration without 'const'.
- gl_cv_iconv_nonconst=yes
- fi
- if test $gl_cv_iconv_nonconst = yes; then
- iconv_arg1=""
- else
- iconv_arg1="const"
- fi
- AC_DEFINE_UNQUOTED([ICONV_CONST], [$iconv_arg1],
- [Define as const if the declaration of iconv() needs const.])
- dnl Also substitute ICONV_CONST in the gnulib generated <iconv.h>.
- m4_ifdef([gl_ICONV_H_DEFAULTS],
- [AC_REQUIRE([gl_ICONV_H_DEFAULTS])
- if test $gl_cv_iconv_nonconst != yes; then
- ICONV_CONST="const"
- fi
- ])
-])
diff --git a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/intlmacosx.m4 b/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/intlmacosx.m4
deleted file mode 100644
index ecc88d6e740..00000000000
--- a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/intlmacosx.m4
+++ /dev/null
@@ -1,65 +0,0 @@
-# intlmacosx.m4 serial 8 (gettext-0.20.2)
-dnl Copyright (C) 2004-2014, 2016, 2019-2022 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Lesser General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Lesser General Public License, and the rest of the GNU
-dnl gettext package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Checks for special options needed on Mac OS X.
-dnl Defines INTL_MACOSX_LIBS.
-AC_DEFUN([gt_INTL_MACOSX],
-[
- dnl Check for API introduced in Mac OS X 10.4.
- AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
- [gt_cv_func_CFPreferencesCopyAppValue],
- [gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[#include <CoreFoundation/CFPreferences.h>]],
- [[CFPreferencesCopyAppValue(NULL, NULL)]])],
- [gt_cv_func_CFPreferencesCopyAppValue=yes],
- [gt_cv_func_CFPreferencesCopyAppValue=no])
- LIBS="$gt_save_LIBS"])
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
- AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1],
- [Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
- fi
- dnl Don't check for the API introduced in Mac OS X 10.5, CFLocaleCopyCurrent,
- dnl because in macOS 10.13.4 it has the following behaviour:
- dnl When two or more languages are specified in the
- dnl "System Preferences > Language & Region > Preferred Languages" panel,
- dnl it returns en_CC where CC is the territory (even when English is not among
- dnl the preferred languages!). What we want instead is what
- dnl CFLocaleCopyCurrent returned in earlier macOS releases and what
- dnl CFPreferencesCopyAppValue still returns, namely ll_CC where ll is the
- dnl first among the preferred languages and CC is the territory.
- AC_CACHE_CHECK([for CFLocaleCopyPreferredLanguages], [gt_cv_func_CFLocaleCopyPreferredLanguages],
- [gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[#include <CoreFoundation/CFLocale.h>]],
- [[CFLocaleCopyPreferredLanguages();]])],
- [gt_cv_func_CFLocaleCopyPreferredLanguages=yes],
- [gt_cv_func_CFLocaleCopyPreferredLanguages=no])
- LIBS="$gt_save_LIBS"])
- if test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
- AC_DEFINE([HAVE_CFLOCALECOPYPREFERREDLANGUAGES], [1],
- [Define to 1 if you have the Mac OS X function CFLocaleCopyPreferredLanguages in the CoreFoundation framework.])
- fi
- INTL_MACOSX_LIBS=
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes \
- || test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
- INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
- fi
- AC_SUBST([INTL_MACOSX_LIBS])
-])
diff --git a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/lib-ld.m4 b/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/lib-ld.m4
deleted file mode 100644
index 934207a7658..00000000000
--- a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/lib-ld.m4
+++ /dev/null
@@ -1,168 +0,0 @@
-# lib-ld.m4 serial 10
-dnl Copyright (C) 1996-2003, 2009-2022 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Subroutines of libtool.m4,
-dnl with replacements s/_*LT_PATH/AC_LIB_PROG/ and s/lt_/acl_/ to avoid
-dnl collision with libtool.m4.
-
-dnl From libtool-2.4. Sets the variable with_gnu_ld to yes or no.
-AC_DEFUN([AC_LIB_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld],
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- acl_cv_prog_gnu_ld=yes
- ;;
-*)
- acl_cv_prog_gnu_ld=no
- ;;
-esac])
-with_gnu_ld=$acl_cv_prog_gnu_ld
-])
-
-dnl From libtool-2.4. Sets the variable LD.
-AC_DEFUN([AC_LIB_PROG_LD],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-
-AC_ARG_WITH([gnu-ld],
- [AS_HELP_STRING([--with-gnu-ld],
- [assume the C compiler uses GNU ld [default=no]])],
- [test "$withval" = no || with_gnu_ld=yes],
- [with_gnu_ld=no])dnl
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
- # contains only /bin. Note that ksh looks also at the FPATH variable,
- # so we have to set that as well for the test.
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- || PATH_SEPARATOR=';'
- }
-fi
-
-if test -n "$LD"; then
- AC_MSG_CHECKING([for ld])
-elif test "$GCC" = yes; then
- AC_MSG_CHECKING([for ld used by $CC])
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-if test -n "$LD"; then
- # Let the user override the test with a path.
- :
-else
- AC_CACHE_VAL([acl_cv_path_LD],
- [
- acl_cv_path_LD= # Final result of this test
- ac_prog=ld # Program to search in $PATH
- if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- acl_output=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- acl_output=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $acl_output in
- # Accept absolute paths.
- [[\\/]]* | ?:[[\\/]]*)
- re_direlt='/[[^/]][[^/]]*/\.\./'
- # Canonicalize the pathname of ld
- acl_output=`echo "$acl_output" | sed 's%\\\\%/%g'`
- while echo "$acl_output" | grep "$re_direlt" > /dev/null 2>&1; do
- acl_output=`echo $acl_output | sed "s%$re_direlt%/%"`
- done
- # Got the pathname. No search in PATH is needed.
- acl_cv_path_LD="$acl_output"
- ac_prog=
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
- fi
- if test -n "$ac_prog"; then
- # Search for $ac_prog in $PATH.
- acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$acl_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$acl_save_ifs"
- fi
- case $host in
- *-*-aix*)
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __powerpc64__ || defined __LP64__
- int ok;
- #else
- error fail
- #endif
- ]])],
- [# The compiler produces 64-bit code. Add option '-b64' so that the
- # linker groks 64-bit object files.
- case "$acl_cv_path_LD " in
- *" -b64 "*) ;;
- *) acl_cv_path_LD="$acl_cv_path_LD -b64" ;;
- esac
- ], [])
- ;;
- sparc64-*-netbsd*)
- AC_COMPILE_IFELSE(
- [AC_LANG_SOURCE(
- [[#if defined __sparcv9 || defined __arch64__
- int ok;
- #else
- error fail
- #endif
- ]])],
- [],
- [# The compiler produces 32-bit code. Add option '-m elf32_sparc'
- # so that the linker groks 32-bit object files.
- case "$acl_cv_path_LD " in
- *" -m elf32_sparc "*) ;;
- *) acl_cv_path_LD="$acl_cv_path_LD -m elf32_sparc" ;;
- esac
- ])
- ;;
- esac
- ])
- LD="$acl_cv_path_LD"
-fi
-if test -n "$LD"; then
- AC_MSG_RESULT([$LD])
-else
- AC_MSG_RESULT([no])
- AC_MSG_ERROR([no acceptable ld found in \$PATH])
-fi
-AC_LIB_PROG_LD_GNU
-])
diff --git a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/lib-link.m4 b/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/lib-link.m4
deleted file mode 100644
index 3b75bcd0de1..00000000000
--- a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/lib-link.m4
+++ /dev/null
@@ -1,813 +0,0 @@
-# lib-link.m4 serial 33
-dnl Copyright (C) 2001-2022 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_PREREQ([2.61])
-
-dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
-dnl augments the CPPFLAGS variable.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- pushdef([Name],[m4_translit([$1],[./+-], [____])])
- pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
- AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
- ac_cv_lib[]Name[]_libs="$LIB[]NAME"
- ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
- ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
- ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
- ])
- LIB[]NAME="$ac_cv_lib[]Name[]_libs"
- LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
- INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
- LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
- dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
- dnl results of this search when this library appears as a dependency.
- HAVE_LIB[]NAME=yes
- popdef([NAME])
- popdef([Name])
-])
-
-dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message])
-dnl searches for libname and the libraries corresponding to explicit and
-dnl implicit dependencies, together with the specified include files and
-dnl the ability to compile and link the specified testcode. The missing-message
-dnl defaults to 'no' and may contain additional hints for the user.
-dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME}
-dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and
-dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
-dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- pushdef([Name],[m4_translit([$1],[./+-], [____])])
- pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
-
- dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
-
- dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
- dnl because if the user has installed lib[]Name and not disabled its use
- dnl via --without-lib[]Name-prefix, he wants to use it.
- ac_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-
- AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
- ac_save_LIBS="$LIBS"
- dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS,
- dnl because these -l options might require -L options that are present in
- dnl LIBS. -l options benefit only from the -L options listed before it.
- dnl Otherwise, add it to the front of LIBS, because it may be a static
- dnl library that depends on another static library that is present in LIBS.
- dnl Static libraries benefit only from the static libraries listed after
- dnl it.
- case " $LIB[]NAME" in
- *" -l"*) LIBS="$LIBS $LIB[]NAME" ;;
- *) LIBS="$LIB[]NAME $LIBS" ;;
- esac
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM([[$3]], [[$4]])],
- [ac_cv_lib[]Name=yes],
- [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])'])
- LIBS="$ac_save_LIBS"
- ])
- if test "$ac_cv_lib[]Name" = yes; then
- HAVE_LIB[]NAME=yes
- AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.])
- AC_MSG_CHECKING([how to link with lib[]$1])
- AC_MSG_RESULT([$LIB[]NAME])
- else
- HAVE_LIB[]NAME=no
- dnl If $LIB[]NAME didn't lead to a usable library, we don't need
- dnl $INC[]NAME either.
- CPPFLAGS="$ac_save_CPPFLAGS"
- LIB[]NAME=
- LTLIB[]NAME=
- LIB[]NAME[]_PREFIX=
- fi
- AC_SUBST([HAVE_LIB]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
- popdef([NAME])
- popdef([Name])
-])
-
-dnl Determine the platform dependent parameters needed to use rpath:
-dnl acl_libext,
-dnl acl_shlibext,
-dnl acl_libname_spec,
-dnl acl_library_names_spec,
-dnl acl_hardcode_libdir_flag_spec,
-dnl acl_hardcode_libdir_separator,
-dnl acl_hardcode_direct,
-dnl acl_hardcode_minus_L.
-AC_DEFUN([AC_LIB_RPATH],
-[
- dnl Complain if config.rpath is missing.
- AC_REQUIRE_AUX_FILE([config.rpath])
- AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
- AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
- AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
- AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
- ])
- wl="$acl_cv_wl"
- acl_libext="$acl_cv_libext"
- acl_shlibext="$acl_cv_shlibext"
- acl_libname_spec="$acl_cv_libname_spec"
- acl_library_names_spec="$acl_cv_library_names_spec"
- acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- acl_hardcode_direct="$acl_cv_hardcode_direct"
- acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
- dnl Determine whether the user wants rpath handling at all.
- AC_ARG_ENABLE([rpath],
- [ --disable-rpath do not hardcode runtime library paths],
- :, enable_rpath=yes)
-])
-
-dnl AC_LIB_FROMPACKAGE(name, package)
-dnl declares that libname comes from the given package. The configure file
-dnl will then not have a --with-libname-prefix option but a
-dnl --with-package-prefix option. Several libraries can come from the same
-dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar
-dnl macro call that searches for libname.
-AC_DEFUN([AC_LIB_FROMPACKAGE],
-[
- pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
- define([acl_frompackage_]NAME, [$2])
- popdef([NAME])
- pushdef([PACK],[$2])
- pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
- define([acl_libsinpackage_]PACKUP,
- m4_ifdef([acl_libsinpackage_]PACKUP, [m4_defn([acl_libsinpackage_]PACKUP)[, ]],)[lib$1])
- popdef([PACKUP])
- popdef([PACK])
-])
-
-dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
-dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
-dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
-[
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
- pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])])
- pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
- pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- eval additional_libdir2=\"$exec_prefix/$acl_libdirstem2\"
- eval additional_libdir3=\"$exec_prefix/$acl_libdirstem3\"
- ])
- AC_ARG_WITH(PACK[-prefix],
-[[ --with-]]PACK[[-prefix[=DIR] search for ]]PACKLIBS[[ in DIR/include and DIR/lib
- --without-]]PACK[[-prefix don't search for ]]PACKLIBS[[ in includedir and libdir]],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- eval additional_libdir2=\"$exec_prefix/$acl_libdirstem2\"
- eval additional_libdir3=\"$exec_prefix/$acl_libdirstem3\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- additional_libdir2="$withval/$acl_libdirstem2"
- additional_libdir3="$withval/$acl_libdirstem3"
- fi
- fi
-])
- if test "X$additional_libdir2" = "X$additional_libdir"; then
- additional_libdir2=
- fi
- if test "X$additional_libdir3" = "X$additional_libdir"; then
- additional_libdir3=
- fi
- dnl Search the library and its dependencies in $additional_libdir and
- dnl $LDFLAGS. Using breadth-first-seach.
- LIB[]NAME=
- LTLIB[]NAME=
- INC[]NAME=
- LIB[]NAME[]_PREFIX=
- dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been
- dnl computed. So it has to be reset here.
- HAVE_LIB[]NAME=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='$1 $2'
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
- dnl or AC_LIB_HAVE_LINKFLAGS call.
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
- else
- dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
- dnl that this library doesn't exist. So just drop it.
- :
- fi
- else
- dnl Search the library lib$name in $additional_libdir and $LDFLAGS
- dnl and the already constructed $LIBNAME/$LTLIBNAME.
- found_dir=
- found_la=
- found_so=
- found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
- if test $use_additional = yes; then
- for additional_libdir_variable in additional_libdir additional_libdir2 additional_libdir3; do
- if test "X$found_dir" = "X"; then
- eval dir=\$$additional_libdir_variable
- if test -n "$dir"; then
- dnl The same code as in the loop below:
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext" && acl_is_expected_elfclass < "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver" && acl_is_expected_elfclass < "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f" && acl_is_expected_elfclass < "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext" && ${AR-ar} -p "$dir/$libname.$acl_libext" | acl_is_expected_elfclass; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- fi
- fi
- done
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext" && acl_is_expected_elfclass < "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver" && acl_is_expected_elfclass < "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f" && acl_is_expected_elfclass < "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext" && ${AR-ar} -p "$dir/$libname.$acl_libext" | acl_is_expected_elfclass; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- dnl Found the library.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- dnl Linking with a shared library. We attempt to hardcode its
- dnl directory into the executable's runpath, unless it's the
- dnl standard /usr/lib.
- if test "$enable_rpath" = no \
- || test "X$found_dir" = "X/usr/$acl_libdirstem" \
- || test "X$found_dir" = "X/usr/$acl_libdirstem2" \
- || test "X$found_dir" = "X/usr/$acl_libdirstem3"; then
- dnl No hardcoding is needed.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl Use an explicit option to hardcode DIR into the resulting
- dnl binary.
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- dnl The hardcoding into $LIBNAME is system dependent.
- if test "$acl_hardcode_direct" = yes; then
- dnl Using DIR/libNAME.so during linking hardcodes DIR into the
- dnl resulting binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode DIR into the resulting
- dnl binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- dnl Rely on "-L$found_dir".
- dnl But don't add it if it's already contained in the LDFLAGS
- dnl or the already constructed $LIBNAME
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
- fi
- if test "$acl_hardcode_minus_L" != no; then
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
- dnl here, because this doesn't fit in flags passed to the
- dnl compiler. So give up. No hardcoding. This affects only
- dnl very old systems.
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- dnl Linking with a static library.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
- else
- dnl We shouldn't come here, but anyway it's good to have a
- dnl fallback.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
- fi
- fi
- dnl Assume the include files are nearby.
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- if test "$name" = '$1'; then
- LIB[]NAME[]_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- */$acl_libdirstem2 | */$acl_libdirstem2/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
- if test "$name" = '$1'; then
- LIB[]NAME[]_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- */$acl_libdirstem3 | */$acl_libdirstem3/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem3/"'*$,,'`
- if test "$name" = '$1'; then
- LIB[]NAME[]_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- dnl Potentially add $additional_includedir to $INCNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's /usr/local/include and we are using GCC on Linux,
- dnl 3. if it's already present in $CPPFLAGS or the already
- dnl constructed $INCNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INC[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $INCNAME.
- INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- dnl Look for dependencies.
- if test -n "$found_la"; then
- dnl Read the .la file. It defines the variables
- dnl dlname, library_names, old_library, dependency_libs, current,
- dnl age, revision, installed, dlopen, dlpreopen, libdir.
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- dnl We use only dependency_libs.
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- dependency_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- dnl Potentially add $dependency_libdir to $LIBNAME and $LTLIBNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
- dnl 3. if it's already present in $LDFLAGS or the already
- dnl constructed $LIBNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$dependency_libdir" != "X/usr/$acl_libdirstem" \
- && test "X$dependency_libdir" != "X/usr/$acl_libdirstem2" \
- && test "X$dependency_libdir" != "X/usr/$acl_libdirstem3"; then
- haveit=
- if test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem" \
- || test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem2" \
- || test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem3"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$dependency_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$dependency_libdir"; then
- dnl Really add $dependency_libdir to $LIBNAME.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$dependency_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$dependency_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$dependency_libdir"; then
- dnl Really add $dependency_libdir to $LTLIBNAME.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$dependency_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- dnl Handle this in the next round.
- dnl But on GNU systems, ignore -lc options, because
- dnl - linking with libc is the default anyway,
- dnl - linking with libc.a may produce an error
- dnl "/usr/bin/ld: dynamic STT_GNU_IFUNC symbol `strcmp' with pointer equality in `/usr/lib/libc.a(strcmp.o)' can not be used when making an executable; recompile with -fPIE and relink with -pie"
- dnl or may produce an executable that always crashes, see
- dnl <https://lists.gnu.org/archive/html/grep-devel/2020-09/msg00052.html>.
- dep=`echo "X$dep" | sed -e 's/^X-l//'`
- if test "X$dep" != Xc \
- || case $host_os in
- linux* | gnu* | k*bsd*-gnu) false ;;
- *) true ;;
- esac; then
- names_next_round="$names_next_round $dep"
- fi
- ;;
- *.la)
- dnl Handle this in the next round. Throw away the .la's
- dnl directory; it is already contained in a preceding -L
- dnl option.
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- dnl Most likely an immediate library name.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
- ;;
- esac
- done
- fi
- else
- dnl Didn't find the library; assume it is in the system directories
- dnl known to the linker and runtime loader. (All the system
- dnl directories known to the linker should also be known to the
- dnl runtime loader, otherwise the system is severely misconfigured.)
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user must
- dnl pass all path elements in one option. We can arrange that for a
- dnl single library, but not when more than one $LIBNAMEs are used.
- alldirs=
- for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
- done
- dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- else
- dnl The -rpath options are cumulative.
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- dnl When using libtool, the option that works for both libraries and
- dnl executables is -R. The -R options are cumulative.
- for found_dir in $ltrpathdirs; do
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
- done
- fi
- popdef([PACKLIBS])
- popdef([PACKUP])
- popdef([PACK])
- popdef([NAME])
-])
-
-dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
-dnl unless already present in VAR.
-dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
-dnl contains two or three consecutive elements that belong together.
-AC_DEFUN([AC_LIB_APPENDTOVAR],
-[
- for element in [$2]; do
- haveit=
- for x in $[$1]; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- [$1]="${[$1]}${[$1]:+ }$element"
- fi
- done
-])
-
-dnl For those cases where a variable contains several -L and -l options
-dnl referring to unknown libraries and directories, this macro determines the
-dnl necessary additional linker options for the runtime path.
-dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
-dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
-dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
-dnl otherwise linking without libtool is assumed.
-AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
-[
- AC_REQUIRE([AC_LIB_RPATH])
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- $1=
- if test "$enable_rpath" != no; then
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode directories into the resulting
- dnl binary.
- rpathdirs=
- next=
- for opt in $2; do
- if test -n "$next"; then
- dir="$next"
- dnl No need to hardcode the standard /usr/lib.
- if test "X$dir" != "X/usr/$acl_libdirstem" \
- && test "X$dir" != "X/usr/$acl_libdirstem2" \
- && test "X$dir" != "X/usr/$acl_libdirstem3"; then
- rpathdirs="$rpathdirs $dir"
- fi
- next=
- else
- case $opt in
- -L) next=yes ;;
- -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
- dnl No need to hardcode the standard /usr/lib.
- if test "X$dir" != "X/usr/$acl_libdirstem" \
- && test "X$dir" != "X/usr/$acl_libdirstem2" \
- && test "X$dir" != "X/usr/$acl_libdirstem3"; then
- rpathdirs="$rpathdirs $dir"
- fi
- next= ;;
- *) next= ;;
- esac
- fi
- done
- if test "X$rpathdirs" != "X"; then
- if test -n ""$3""; then
- dnl libtool is used for linking. Use -R options.
- for dir in $rpathdirs; do
- $1="${$1}${$1:+ }-R$dir"
- done
- else
- dnl The linker is used for linking directly.
- if test -n "$acl_hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user
- dnl must pass all path elements in one option.
- alldirs=
- for dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- $1="$flag"
- else
- dnl The -rpath options are cumulative.
- for dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- $1="${$1}${$1:+ }$flag"
- done
- fi
- fi
- fi
- fi
- fi
- AC_SUBST([$1])
-])
diff --git a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/lib-prefix.m4 b/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/lib-prefix.m4
deleted file mode 100644
index 999f712f5ac..00000000000
--- a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/lib-prefix.m4
+++ /dev/null
@@ -1,323 +0,0 @@
-# lib-prefix.m4 serial 20
-dnl Copyright (C) 2001-2005, 2008-2022 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
-dnl to access previously installed libraries. The basic assumption is that
-dnl a user will want packages to use other packages he previously installed
-dnl with the same --prefix option.
-dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
-dnl libraries, but is otherwise very convenient.
-AC_DEFUN([AC_LIB_PREFIX],
-[
- AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_ARG_WITH([lib-prefix],
-[[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
- --without-lib-prefix don't search for libraries in includedir and libdir]],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- fi
- fi
-])
- if test $use_additional = yes; then
- dnl Potentially add $additional_includedir to $CPPFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's already present in $CPPFLAGS,
- dnl 3. if it's /usr/local/include and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- for x in $CPPFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $CPPFLAGS.
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- dnl Potentially add $additional_libdir to $LDFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's already present in $LDFLAGS,
- dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
- haveit=
- for x in $LDFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
- if test -n "$GCC"; then
- case $host_os in
- linux*) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LDFLAGS.
- LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- fi
-])
-
-dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
-dnl acl_final_exec_prefix, containing the values to which $prefix and
-dnl $exec_prefix will expand at the end of the configure script.
-AC_DEFUN([AC_LIB_PREPARE_PREFIX],
-[
- dnl Unfortunately, prefix and exec_prefix get only finally determined
- dnl at the end of configure.
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
-dnl variables prefix and exec_prefix bound to the values they will have
-dnl at the end of the configure script.
-AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
-[
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- $1
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_PREPARE_MULTILIB creates
-dnl - a function acl_is_expected_elfclass, that tests whether standard input
-dn; has a 32-bit or 64-bit ELF header, depending on the host CPU ABI,
-dnl - 3 variables acl_libdirstem, acl_libdirstem2, acl_libdirstem3, containing
-dnl the basename of the libdir to try in turn, either "lib" or "lib64" or
-dnl "lib/64" or "lib32" or "lib/sparcv9" or "lib/amd64" or similar.
-AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
-[
- dnl There is no formal standard regarding lib, lib32, and lib64.
- dnl On most glibc systems, the current practice is that on a system supporting
- dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
- dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. However, on
- dnl Arch Linux based distributions, it's the opposite: 32-bit libraries go
- dnl under $prefix/lib32 and 64-bit libraries go under $prefix/lib.
- dnl We determine the compiler's default mode by looking at the compiler's
- dnl library search path. If at least one of its elements ends in /lib64 or
- dnl points to a directory whose absolute pathname ends in /lib64, we use that
- dnl for 64-bit ABIs. Similarly for 32-bit ABIs. Otherwise we use the default,
- dnl namely "lib".
- dnl On Solaris systems, the current practice is that on a system supporting
- dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
- dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or
- dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib.
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([gl_HOST_CPU_C_ABI_32BIT])
-
- AC_CACHE_CHECK([for ELF binary format], [gl_cv_elf],
- [AC_EGREP_CPP([Extensible Linking Format],
- [#if defined __ELF__ || (defined __linux__ && defined __EDG__)
- Extensible Linking Format
- #endif
- ],
- [gl_cv_elf=yes],
- [gl_cv_elf=no])
- ])
- if test $gl_cv_elf = yes; then
- # Extract the ELF class of a file (5th byte) in decimal.
- # Cf. https://en.wikipedia.org/wiki/Executable_and_Linkable_Format#File_header
- if od -A x < /dev/null >/dev/null 2>/dev/null; then
- # Use POSIX od.
- func_elfclass ()
- {
- od -A n -t d1 -j 4 -N 1
- }
- else
- # Use BSD hexdump.
- func_elfclass ()
- {
- dd bs=1 count=1 skip=4 2>/dev/null | hexdump -e '1/1 "%3d "'
- echo
- }
- fi
- # Use 'expr', not 'test', to compare the values of func_elfclass, because on
- # Solaris 11 OpenIndiana and Solaris 11 OmniOS, the result is 001 or 002,
- # not 1 or 2.
-changequote(,)dnl
- case $HOST_CPU_C_ABI_32BIT in
- yes)
- # 32-bit ABI.
- acl_is_expected_elfclass ()
- {
- expr "`func_elfclass | sed -e 's/[ ]//g'`" = 1 > /dev/null
- }
- ;;
- no)
- # 64-bit ABI.
- acl_is_expected_elfclass ()
- {
- expr "`func_elfclass | sed -e 's/[ ]//g'`" = 2 > /dev/null
- }
- ;;
- *)
- # Unknown.
- acl_is_expected_elfclass ()
- {
- :
- }
- ;;
- esac
-changequote([,])dnl
- else
- acl_is_expected_elfclass ()
- {
- :
- }
- fi
-
- dnl Allow the user to override the result by setting acl_cv_libdirstems.
- AC_CACHE_CHECK([for the common suffixes of directories in the library search path],
- [acl_cv_libdirstems],
- [dnl Try 'lib' first, because that's the default for libdir in GNU, see
- dnl <https://www.gnu.org/prep/standards/html_node/Directory-Variables.html>.
- acl_libdirstem=lib
- acl_libdirstem2=
- acl_libdirstem3=
- case "$host_os" in
- solaris*)
- dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment
- dnl <https://docs.oracle.com/cd/E19253-01/816-5138/dev-env/index.html>.
- dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link."
- dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the
- dnl symlink is missing, so we set acl_libdirstem2 too.
- if test $HOST_CPU_C_ABI_32BIT = no; then
- acl_libdirstem2=lib/64
- case "$host_cpu" in
- sparc*) acl_libdirstem3=lib/sparcv9 ;;
- i*86 | x86_64) acl_libdirstem3=lib/amd64 ;;
- esac
- fi
- ;;
- *)
- dnl If $CC generates code for a 32-bit ABI, the libraries are
- dnl surely under $prefix/lib or $prefix/lib32, not $prefix/lib64.
- dnl Similarly, if $CC generates code for a 64-bit ABI, the libraries
- dnl are surely under $prefix/lib or $prefix/lib64, not $prefix/lib32.
- dnl Find the compiler's search path. However, non-system compilers
- dnl sometimes have odd library search paths. But we can't simply invoke
- dnl '/usr/bin/gcc -print-search-dirs' because that would not take into
- dnl account the -m32/-m31 or -m64 options from the $CC or $CFLAGS.
- searchpath=`(LC_ALL=C $CC $CPPFLAGS $CFLAGS -print-search-dirs) 2>/dev/null \
- | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
- if test $HOST_CPU_C_ABI_32BIT != no; then
- # 32-bit or unknown ABI.
- if test -d /usr/lib32; then
- acl_libdirstem2=lib32
- fi
- fi
- if test $HOST_CPU_C_ABI_32BIT != yes; then
- # 64-bit or unknown ABI.
- if test -d /usr/lib64; then
- acl_libdirstem3=lib64
- fi
- fi
- if test -n "$searchpath"; then
- acl_save_IFS="${IFS= }"; IFS=":"
- for searchdir in $searchpath; do
- if test -d "$searchdir"; then
- case "$searchdir" in
- */lib32/ | */lib32 ) acl_libdirstem2=lib32 ;;
- */lib64/ | */lib64 ) acl_libdirstem3=lib64 ;;
- */../ | */.. )
- # Better ignore directories of this form. They are misleading.
- ;;
- *) searchdir=`cd "$searchdir" && pwd`
- case "$searchdir" in
- */lib32 ) acl_libdirstem2=lib32 ;;
- */lib64 ) acl_libdirstem3=lib64 ;;
- esac ;;
- esac
- fi
- done
- IFS="$acl_save_IFS"
- if test $HOST_CPU_C_ABI_32BIT = yes; then
- # 32-bit ABI.
- acl_libdirstem3=
- fi
- if test $HOST_CPU_C_ABI_32BIT = no; then
- # 64-bit ABI.
- acl_libdirstem2=
- fi
- fi
- ;;
- esac
- test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
- test -n "$acl_libdirstem3" || acl_libdirstem3="$acl_libdirstem"
- acl_cv_libdirstems="$acl_libdirstem,$acl_libdirstem2,$acl_libdirstem3"
- ])
- dnl Decompose acl_cv_libdirstems into acl_libdirstem, acl_libdirstem2, and
- dnl acl_libdirstem3.
-changequote(,)dnl
- acl_libdirstem=`echo "$acl_cv_libdirstems" | sed -e 's/,.*//'`
- acl_libdirstem2=`echo "$acl_cv_libdirstems" | sed -e 's/^[^,]*,//' -e 's/,.*//'`
- acl_libdirstem3=`echo "$acl_cv_libdirstems" | sed -e 's/^[^,]*,[^,]*,//' -e 's/,.*//'`
-changequote([,])dnl
-])
diff --git a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/nls.m4 b/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/nls.m4
deleted file mode 100644
index 7c11c90f526..00000000000
--- a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/nls.m4
+++ /dev/null
@@ -1,32 +0,0 @@
-# nls.m4 serial 6 (gettext-0.20.2)
-dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014, 2016, 2019-2022 Free
-dnl Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Lesser General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Lesser General Public License, and the rest of the GNU
-dnl gettext package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-
-AC_PREREQ([2.50])
-
-AC_DEFUN([AM_NLS],
-[
- AC_MSG_CHECKING([whether NLS is requested])
- dnl Default is enabled NLS
- AC_ARG_ENABLE([nls],
- [ --disable-nls do not use Native Language Support],
- USE_NLS=$enableval, USE_NLS=yes)
- AC_MSG_RESULT([$USE_NLS])
- AC_SUBST([USE_NLS])
-])
diff --git a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/po.m4 b/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/po.m4
deleted file mode 100644
index 2f14f8e2b1b..00000000000
--- a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/po.m4
+++ /dev/null
@@ -1,454 +0,0 @@
-# po.m4 serial 32 (gettext-0.21.1)
-dnl Copyright (C) 1995-2014, 2016, 2018-2022 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Lesser General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Lesser General Public License, and the rest of the GNU
-dnl gettext package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-
-AC_PREREQ([2.60])
-
-dnl Checks for all prerequisites of the po subdirectory.
-AC_DEFUN([AM_PO_SUBDIRS],
-[
- AC_REQUIRE([AC_PROG_MAKE_SET])dnl
- AC_REQUIRE([AC_PROG_INSTALL])dnl
- AC_REQUIRE([AC_PROG_MKDIR_P])dnl
- AC_REQUIRE([AC_PROG_SED])dnl
- AC_REQUIRE([AM_NLS])dnl
-
- dnl Release version of the gettext macros. This is used to ensure that
- dnl the gettext macros and po/Makefile.in.in are in sync.
- AC_SUBST([GETTEXT_MACRO_VERSION], [0.20])
-
- dnl Perform the following tests also if --disable-nls has been given,
- dnl because they are needed for "make dist" to work.
-
- dnl Search for GNU msgfmt in the PATH.
- dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
- dnl The second test excludes FreeBSD msgfmt.
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
- (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
- :)
- AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
-
- dnl Test whether it is GNU msgfmt >= 0.15.
-changequote(,)dnl
- case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
- *) GMSGFMT_015=$GMSGFMT ;;
- esac
-changequote([,])dnl
- AC_SUBST([GMSGFMT_015])
-
- dnl Search for GNU xgettext 0.12 or newer in the PATH.
- dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
- dnl The second test excludes FreeBSD xgettext.
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
- (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
- :)
- dnl Remove leftover from FreeBSD xgettext call.
- rm -f messages.po
-
- dnl Test whether it is GNU xgettext >= 0.15.
-changequote(,)dnl
- case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
- *) XGETTEXT_015=$XGETTEXT ;;
- esac
-changequote([,])dnl
- AC_SUBST([XGETTEXT_015])
-
- dnl Search for GNU msgmerge 0.11 or newer in the PATH.
- AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
- [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
-
- dnl Test whether it is GNU msgmerge >= 0.20.
- if LC_ALL=C $MSGMERGE --help | grep ' --for-msgfmt ' >/dev/null; then
- MSGMERGE_FOR_MSGFMT_OPTION='--for-msgfmt'
- else
- dnl Test whether it is GNU msgmerge >= 0.12.
- if LC_ALL=C $MSGMERGE --help | grep ' --no-fuzzy-matching ' >/dev/null; then
- MSGMERGE_FOR_MSGFMT_OPTION='--no-fuzzy-matching --no-location --quiet'
- else
- dnl With these old versions, $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) is
- dnl slow. But this is not a big problem, as such old gettext versions are
- dnl hardly in use any more.
- MSGMERGE_FOR_MSGFMT_OPTION='--no-location --quiet'
- fi
- fi
- AC_SUBST([MSGMERGE_FOR_MSGFMT_OPTION])
-
- dnl Support for AM_XGETTEXT_OPTION.
- test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
- AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
-
- AC_CONFIG_COMMANDS([po-directories], [[
- for ac_file in $CONFIG_FILES; do
- # Support "outfile[:infile[:infile...]]"
- case "$ac_file" in
- *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- esac
- # PO directories have a Makefile.in generated from Makefile.in.in.
- case "$ac_file" in */Makefile.in)
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
- # Treat a directory as a PO directory if and only if it has a
- # POTFILES.in file. This allows packages to have multiple PO
- # directories under different names or in different locations.
- if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
- rm -f "$ac_dir/POTFILES"
- test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
- gt_tab=`printf '\t'`
- cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
- POMAKEFILEDEPS="POTFILES.in"
- # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
- # on $ac_dir but don't depend on user-specified configuration
- # parameters.
- if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
- # The LINGUAS file contains the set of available languages.
- if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
- fi
- ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
- POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
- else
- # The set of available languages was given in configure.in.
- ALL_LINGUAS=$OBSOLETE_ALL_LINGUAS
- fi
- # Compute POFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
- # Compute UPDATEPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
- # Compute DUMMYPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
- # Compute GMOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
- case "$ac_given_srcdir" in
- .) srcdirpre= ;;
- *) srcdirpre='$(srcdir)/' ;;
- esac
- POFILES=
- UPDATEPOFILES=
- DUMMYPOFILES=
- GMOFILES=
- for lang in $ALL_LINGUAS; do
- POFILES="$POFILES $srcdirpre$lang.po"
- UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
- DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
- done
- # CATALOGS depends on both $ac_dir and the user's LINGUAS
- # environment variable.
- INST_LINGUAS=
- if test -n "$ALL_LINGUAS"; then
- for presentlang in $ALL_LINGUAS; do
- useit=no
- if test "%UNSET%" != "$LINGUAS"; then
- desiredlanguages="$LINGUAS"
- else
- desiredlanguages="$ALL_LINGUAS"
- fi
- for desiredlang in $desiredlanguages; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang" | "$presentlang"_* | "$presentlang".* | "$presentlang"@*)
- useit=yes
- ;;
- esac
- done
- if test $useit = yes; then
- INST_LINGUAS="$INST_LINGUAS $presentlang"
- fi
- done
- fi
- CATALOGS=
- if test -n "$INST_LINGUAS"; then
- for lang in $INST_LINGUAS; do
- CATALOGS="$CATALOGS $lang.gmo"
- done
- fi
- test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
- sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
- for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
- if test -f "$f"; then
- case "$f" in
- *.orig | *.bak | *~) ;;
- *) cat "$f" >> "$ac_dir/Makefile" ;;
- esac
- fi
- done
- fi
- ;;
- esac
- done]],
- [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
- # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS.
- OBSOLETE_ALL_LINGUAS="$ALL_LINGUAS"
- # Capture the value of LINGUAS because we need it to compute CATALOGS.
- LINGUAS="${LINGUAS-%UNSET%}"
- ])
-])
-
-dnl Postprocesses a Makefile in a directory containing PO files.
-AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
-[
- # When this code is run, in config.status, two variables have already been
- # set:
- # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
- # - LINGUAS is the value of the environment variable LINGUAS at configure
- # time.
-
-changequote(,)dnl
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
-
- # Find a way to echo strings without interpreting backslash.
- if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
- gt_echo='echo'
- else
- if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
- gt_echo='printf %s\n'
- else
- echo_func () {
- cat <<EOT
-$*
-EOT
- }
- gt_echo='echo_func'
- fi
- fi
-
- # A sed script that extracts the value of VARIABLE from a Makefile.
- tab=`printf '\t'`
- sed_x_variable='
-# Test if the hold space is empty.
-x
-s/P/P/
-x
-ta
-# Yes it was empty. Look if we have the expected variable definition.
-/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=/{
- # Seen the first line of the variable definition.
- s/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=//
- ba
-}
-bd
-:a
-# Here we are processing a line from the variable definition.
-# Remove comment, more precisely replace it with a space.
-s/#.*$/ /
-# See if the line ends in a backslash.
-tb
-:b
-s/\\$//
-# Print the line, without the trailing backslash.
-p
-tc
-# There was no trailing backslash. The end of the variable definition is
-# reached. Clear the hold space.
-s/^.*$//
-x
-bd
-:c
-# A trailing backslash means that the variable definition continues in the
-# next line. Put a nonempty string into the hold space to indicate this.
-s/^.*$/P/
-x
-:d
-'
-changequote([,])dnl
-
- # Set POTFILES to the value of the Makefile variable POTFILES.
- sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
- POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
- # Compute POTFILES_DEPS as
- # $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
- POTFILES_DEPS=
- for file in $POTFILES; do
- POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
- done
- POMAKEFILEDEPS=""
-
- if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
- fi
- if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
- # The LINGUAS file contains the set of available languages.
- ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
- POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
- else
- # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
- sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
- ALL_LINGUAS=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
- fi
- # Compute POFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
- # Compute UPDATEPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
- # Compute DUMMYPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
- # Compute GMOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
- # Compute PROPERTIESFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(DOMAIN)_$(lang).properties)
- # Compute CLASSFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(DOMAIN)_$(lang).class)
- # Compute QMFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
- # Compute MSGFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
- # Compute RESOURCESDLLFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
- case "$ac_given_srcdir" in
- .) srcdirpre= ;;
- *) srcdirpre='$(srcdir)/' ;;
- esac
- POFILES=
- UPDATEPOFILES=
- DUMMYPOFILES=
- GMOFILES=
- PROPERTIESFILES=
- CLASSFILES=
- QMFILES=
- MSGFILES=
- RESOURCESDLLFILES=
- for lang in $ALL_LINGUAS; do
- POFILES="$POFILES $srcdirpre$lang.po"
- UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
- DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
- PROPERTIESFILES="$PROPERTIESFILES \$(srcdir)/\$(DOMAIN)_$lang.properties"
- CLASSFILES="$CLASSFILES \$(srcdir)/\$(DOMAIN)_$lang.class"
- QMFILES="$QMFILES $srcdirpre$lang.qm"
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
- done
- # CATALOGS depends on both $ac_dir and the user's LINGUAS
- # environment variable.
- INST_LINGUAS=
- if test -n "$ALL_LINGUAS"; then
- for presentlang in $ALL_LINGUAS; do
- useit=no
- if test "%UNSET%" != "$LINGUAS"; then
- desiredlanguages="$LINGUAS"
- else
- desiredlanguages="$ALL_LINGUAS"
- fi
- for desiredlang in $desiredlanguages; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang" | "$presentlang"_* | "$presentlang".* | "$presentlang"@*)
- useit=yes
- ;;
- esac
- done
- if test $useit = yes; then
- INST_LINGUAS="$INST_LINGUAS $presentlang"
- fi
- done
- fi
- CATALOGS=
- JAVACATALOGS=
- QTCATALOGS=
- TCLCATALOGS=
- CSHARPCATALOGS=
- if test -n "$INST_LINGUAS"; then
- for lang in $INST_LINGUAS; do
- CATALOGS="$CATALOGS $lang.gmo"
- JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
- QTCATALOGS="$QTCATALOGS $lang.qm"
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
- done
- fi
-
- sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
- tab=`printf '\t'`
- if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
- # Add dependencies that cannot be formulated as a simple suffix rule.
- for lang in $ALL_LINGUAS; do
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- cat >> "$ac_file.tmp" <<EOF
-$frobbedlang.msg: $lang.po
-${tab}@echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
-${tab}\$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
-EOF
- done
- fi
- if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
- # Add dependencies that cannot be formulated as a simple suffix rule.
- for lang in $ALL_LINGUAS; do
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- cat >> "$ac_file.tmp" <<EOF
-$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
-${tab}@echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
-${tab}\$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
-EOF
- done
- fi
- if test -n "$POMAKEFILEDEPS"; then
- cat >> "$ac_file.tmp" <<EOF
-Makefile: $POMAKEFILEDEPS
-EOF
- fi
- mv "$ac_file.tmp" "$ac_file"
-])
-
-dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
-AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
-[
- XGETTEXT_EXTRA_OPTIONS=
-])
-
-dnl Registers an option to be passed to xgettext in the po subdirectory.
-AC_DEFUN([AM_XGETTEXT_OPTION],
-[
- AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
- XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
-])
diff --git a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/progtest.m4 b/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/progtest.m4
deleted file mode 100644
index 4a5b0b4c6d9..00000000000
--- a/meta/recipes-core/gettext/gettext-minimal-0.21.1/aclocal/progtest.m4
+++ /dev/null
@@ -1,91 +0,0 @@
-# progtest.m4 serial 9 (gettext-0.21.1)
-dnl Copyright (C) 1996-2003, 2005, 2008-2022 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Lesser General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Lesser General Public License, and the rest of the GNU
-dnl gettext package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-AC_PREREQ([2.53])
-
-# Search path for a program which passes the given test.
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN([AM_PATH_PROG_WITH_TEST],
-[
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
- # contains only /bin. Note that ksh looks also at the FPATH variable,
- # so we have to set that as well for the test.
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- || PATH_SEPARATOR=';'
- }
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL([ac_cv_path_$1],
-[case "[$]$1" in
- [[\\/]]* | ?:[[\\/]]*)
- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in m4_if([$5], , $PATH, [$5]); do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
- if [$3]; then
- ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-m4_if([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
- ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test m4_if([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
- AC_MSG_RESULT([$][$1])
-else
- AC_MSG_RESULT([no])
-fi
-AC_SUBST([$1])dnl
-])
diff --git a/meta/recipes-core/gettext/gettext-minimal-0.21.1/config.rpath b/meta/recipes-core/gettext/gettext-minimal-0.21.1/config.rpath
deleted file mode 100755
index 1e1ab679065..00000000000
--- a/meta/recipes-core/gettext/gettext-minimal-0.21.1/config.rpath
+++ /dev/null
@@ -1,684 +0,0 @@
-#! /bin/sh
-# Output a system dependent set of variables, describing how to set the
-# run time search path of shared libraries in an executable.
-#
-# Copyright 1996-2022 Free Software Foundation, Inc.
-# Taken from GNU libtool, 2001
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-#
-# The first argument passed to this file is the canonical host specification,
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
-# should be set by the caller.
-#
-# The set of defined variables is at the end of this script.
-
-# Known limitations:
-# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
-# than 256 bytes, otherwise the compiler driver will dump core. The only
-# known workaround is to choose shorter directory names for the build
-# directory and/or the installation directory.
-
-# All known linkers require a '.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-shrext=.so
-
-host="$1"
-host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-# Code taken from libtool.m4's _LT_CC_BASENAME.
-
-for cc_temp in $CC""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
-
-# Code taken from libtool.m4's _LT_COMPILER_PIC.
-
-wl=
-if test "$GCC" = yes; then
- wl='-Wl,'
-else
- case "$host_os" in
- aix*)
- wl='-Wl,'
- ;;
- mingw* | cygwin* | pw32* | os2* | cegcc*)
- ;;
- hpux9* | hpux10* | hpux11*)
- wl='-Wl,'
- ;;
- irix5* | irix6* | nonstopux*)
- wl='-Wl,'
- ;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
- case $cc_basename in
- ecc*)
- wl='-Wl,'
- ;;
- icc* | ifort*)
- wl='-Wl,'
- ;;
- lf95*)
- wl='-Wl,'
- ;;
- nagfor*)
- wl='-Wl,-Wl,,'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
- wl='-Wl,'
- ;;
- ccc*)
- wl='-Wl,'
- ;;
- xl* | bgxl* | bgf* | mpixl*)
- wl='-Wl,'
- ;;
- como)
- wl='-lopt='
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ F* | *Sun*Fortran*)
- wl=
- ;;
- *Sun\ C*)
- wl='-Wl,'
- ;;
- esac
- ;;
- esac
- ;;
- newsos6)
- ;;
- *nto* | *qnx*)
- ;;
- osf3* | osf4* | osf5*)
- wl='-Wl,'
- ;;
- rdos*)
- ;;
- solaris*)
- case $cc_basename in
- f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
- wl='-Qoption ld '
- ;;
- *)
- wl='-Wl,'
- ;;
- esac
- ;;
- sunos4*)
- wl='-Qoption ld '
- ;;
- sysv4 | sysv4.2uw2* | sysv4.3*)
- wl='-Wl,'
- ;;
- sysv4*MP*)
- ;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- wl='-Wl,'
- ;;
- unicos*)
- wl='-Wl,'
- ;;
- uts4*)
- ;;
- esac
-fi
-
-# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
-
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-
-case "$host_os" in
- cygwin* | mingw* | pw32* | cegcc*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- # Unlike libtool, we use -rpath here, not --rpath, since the documented
- # option of GNU ld is called -rpath, not --rpath.
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- case "$host_os" in
- aix[3-9]*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs=no
- fi
- ;;
- amigaos*)
- case "$host_cpu" in
- powerpc)
- ;;
- m68k)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
- esac
- ;;
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- cygwin* | mingw* | pw32* | cegcc*)
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec='-L$libdir'
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- haiku*)
- ;;
- interix[3-9]*)
- hardcode_direct=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- netbsd*)
- ;;
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs=no
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs=no
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- else
- ld_shlibs=no
- fi
- ;;
- esac
- ;;
- sunos4*)
- hardcode_direct=yes
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- esac
- if test "$ld_shlibs" = no; then
- hardcode_libdir_flag_spec=
- fi
-else
- case "$host_os" in
- aix3*)
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$GCC" = yes; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
- aix[4-9]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- else
- aix_use_runtimelinking=no
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
- fi
- hardcode_direct=yes
- hardcode_libdir_separator=':'
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- hardcode_direct=unsupported
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
- fi
- ;;
- esac
- fi
- # Begin _LT_AC_SYS_LIBPATH_AIX.
- echo 'int main () { return 0; }' > conftest.c
- ${CC} ${LDFLAGS} conftest.c -o conftest
- aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
- if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
- fi
- if test -z "$aix_libpath"; then
- aix_libpath="/usr/lib:/lib"
- fi
- rm -f conftest.c conftest
- # End _LT_AC_SYS_LIBPATH_AIX.
- if test "$aix_use_runtimelinking" = yes; then
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
- else
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- fi
- fi
- ;;
- amigaos*)
- case "$host_cpu" in
- powerpc)
- ;;
- m68k)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
- esac
- ;;
- bsdi[45]*)
- ;;
- cygwin* | mingw* | pw32* | cegcc*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- libext=lib
- ;;
- darwin* | rhapsody*)
- hardcode_direct=no
- if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- dgux*)
- hardcode_libdir_flag_spec='-L$libdir'
- ;;
- freebsd2.[01]*)
- hardcode_direct=yes
- hardcode_minus_L=yes
- ;;
- freebsd* | dragonfly* | midnightbsd*)
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- ;;
- hpux9*)
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- ;;
- hpux10*)
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- fi
- ;;
- hpux11*)
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_direct=no
- ;;
- *)
- hardcode_direct=yes
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- ;;
- esac
- fi
- ;;
- irix5* | irix6* | nonstopux*)
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
- netbsd*)
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- ;;
- newsos6)
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
- *nto* | *qnx*)
- ;;
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct=yes
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- else
- case "$host_os" in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- ld_shlibs=no
- fi
- ;;
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
- osf3*)
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
- osf4* | osf5*)
- if test "$GCC" = yes; then
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- # Both cc and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec='-rpath $libdir'
- fi
- hardcode_libdir_separator=:
- ;;
- solaris*)
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- sunos4*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- ;;
- sysv4)
- case $host_vendor in
- sni)
- hardcode_direct=yes # is this really true???
- ;;
- siemens)
- hardcode_direct=no
- ;;
- motorola)
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- ;;
- sysv4.3*)
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- ld_shlibs=yes
- fi
- ;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator=':'
- ;;
- uts4*)
- hardcode_libdir_flag_spec='-L$libdir'
- ;;
- *)
- ld_shlibs=no
- ;;
- esac
-fi
-
-# Check dynamic linker characteristics
-# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
-# Unlike libtool.m4, here we don't care about _all_ names of the library, but
-# only about the one the linker finds when passed -lNAME. This is the last
-# element of library_names_spec in libtool.m4, or possibly two of them if the
-# linker has special search rules.
-library_names_spec= # the last element of library_names_spec in libtool.m4
-libname_spec='lib$name'
-case "$host_os" in
- aix3*)
- library_names_spec='$libname.a'
- ;;
- aix[4-9]*)
- library_names_spec='$libname$shrext'
- ;;
- amigaos*)
- case "$host_cpu" in
- powerpc*)
- library_names_spec='$libname$shrext' ;;
- m68k)
- library_names_spec='$libname.a' ;;
- esac
- ;;
- beos*)
- library_names_spec='$libname$shrext'
- ;;
- bsdi[45]*)
- library_names_spec='$libname$shrext'
- ;;
- cygwin* | mingw* | pw32* | cegcc*)
- shrext=.dll
- library_names_spec='$libname.dll.a $libname.lib'
- ;;
- darwin* | rhapsody*)
- shrext=.dylib
- library_names_spec='$libname$shrext'
- ;;
- dgux*)
- library_names_spec='$libname$shrext'
- ;;
- freebsd[23].*)
- library_names_spec='$libname$shrext$versuffix'
- ;;
- freebsd* | dragonfly* | midnightbsd*)
- library_names_spec='$libname$shrext'
- ;;
- gnu*)
- library_names_spec='$libname$shrext'
- ;;
- haiku*)
- library_names_spec='$libname$shrext'
- ;;
- hpux9* | hpux10* | hpux11*)
- case $host_cpu in
- ia64*)
- shrext=.so
- ;;
- hppa*64*)
- shrext=.sl
- ;;
- *)
- shrext=.sl
- ;;
- esac
- library_names_spec='$libname$shrext'
- ;;
- interix[3-9]*)
- library_names_spec='$libname$shrext'
- ;;
- irix5* | irix6* | nonstopux*)
- library_names_spec='$libname$shrext'
- case "$host_os" in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
- *) libsuff= shlibsuff= ;;
- esac
- ;;
- esac
- ;;
- linux*oldld* | linux*aout* | linux*coff*)
- ;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
- library_names_spec='$libname$shrext'
- ;;
- knetbsd*-gnu)
- library_names_spec='$libname$shrext'
- ;;
- netbsd*)
- library_names_spec='$libname$shrext'
- ;;
- newsos6)
- library_names_spec='$libname$shrext'
- ;;
- *nto* | *qnx*)
- library_names_spec='$libname$shrext'
- ;;
- openbsd*)
- library_names_spec='$libname$shrext$versuffix'
- ;;
- os2*)
- libname_spec='$name'
- shrext=.dll
- library_names_spec='$libname.a'
- ;;
- osf3* | osf4* | osf5*)
- library_names_spec='$libname$shrext'
- ;;
- rdos*)
- ;;
- solaris*)
- library_names_spec='$libname$shrext'
- ;;
- sunos4*)
- library_names_spec='$libname$shrext$versuffix'
- ;;
- sysv4 | sysv4.3*)
- library_names_spec='$libname$shrext'
- ;;
- sysv4*MP*)
- library_names_spec='$libname$shrext'
- ;;
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- library_names_spec='$libname$shrext'
- ;;
- tpf*)
- library_names_spec='$libname$shrext'
- ;;
- uts4*)
- library_names_spec='$libname$shrext'
- ;;
-esac
-
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
-shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
-escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-
-LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
-
-# How to pass a linker flag through the compiler.
-wl="$escaped_wl"
-
-# Static library suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally "so").
-shlibext="$shlibext"
-
-# Format of library name prefix.
-libname_spec="$escaped_libname_spec"
-
-# Library names that the linker finds when passed -lNAME.
-library_names_spec="$escaped_library_names_spec"
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator="$hardcode_libdir_separator"
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct="$hardcode_direct"
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L="$hardcode_minus_L"
-
-EOF
diff --git a/meta/recipes-core/gettext/gettext-minimal-0.21.1/remove-potcdate.sin b/meta/recipes-core/gettext/gettext-minimal-0.21.1/remove-potcdate.sin
deleted file mode 100644
index 8c70dfbf148..00000000000
--- a/meta/recipes-core/gettext/gettext-minimal-0.21.1/remove-potcdate.sin
+++ /dev/null
@@ -1,25 +0,0 @@
-# Sed script that removes the POT-Creation-Date line in the header entry
-# from a POT file.
-#
-# Copyright (C) 2002 Free Software Foundation, Inc.
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved. This file is offered as-is,
-# without any warranty.
-#
-# The distinction between the first and the following occurrences of the
-# pattern is achieved by looking at the hold space.
-/^"POT-Creation-Date: .*"$/{
-x
-# Test if the hold space is empty.
-s/P/P/
-ta
-# Yes it was empty. First occurrence. Remove the line.
-g
-d
-bb
-:a
-# The hold space was nonempty. Following occurrences. Do nothing.
-x
-:b
-}
diff --git a/meta/recipes-core/gettext/gettext-minimal-native_0.21.1.bb b/meta/recipes-core/gettext/gettext-minimal-native_0.21.1.bb
index 7a4dcbec57b..db1bbb7e687 100644
--- a/meta/recipes-core/gettext/gettext-minimal-native_0.21.1.bb
+++ b/meta/recipes-core/gettext/gettext-minimal-native_0.21.1.bb
@@ -3,10 +3,9 @@ DESCRIPTION = "Contains the m4 macros sufficient to support building \
autoconf/automake. This provides a significant build time speedup by \
the removal of gettext-native from most dependency chains (now only \
needed for gettext for the target)."
-SRC_URI = "file://aclocal/ \
- file://config.rpath \
- file://Makefile.in.in \
- file://remove-potcdate.sin \
+
+require gettext-sources.inc
+SRC_URI += " \
file://COPYING \
"
@@ -14,17 +13,34 @@ INHIBIT_DEFAULT_DEPS = "1"
INHIBIT_AUTOTOOLS_DEPS = "1"
LICENSE = "FSF-Unlimited"
-LIC_FILES_CHKSUM = "file://COPYING;md5=4bd090a20bfcd1a18f1f79837b5e3e91"
+LIC_FILES_CHKSUM = "file://../COPYING;md5=4bd090a20bfcd1a18f1f79837b5e3e91"
inherit native
-S = "${WORKDIR}"
+S = "${WORKDIR}/gettext-${PV}"
+
+python get_aclocal_files() {
+ fpath = oe.path.join(d.getVar("S"), "/gettext-tools/m4/Makefile.am")
+ with open(fpath) as f:
+ content = f.read()
+ for l in content.replace("\\\n","").split("\n"):
+ if l.startswith("aclocal_DATA"):
+ aclocal_files = l.split("=")[1]
+ with open(oe.path.join(d.getVar("WORKDIR"),"aclocal-files"),'w') as outf:
+ outf.write(aclocal_files)
+ break
+ else:
+ bb.error("Could not obtain list of installed aclocal files from {}".format(fpath))
+}
+do_install[prefuncs] += "get_aclocal_files"
do_install () {
install -d ${D}${datadir}/aclocal/
- cp ${WORKDIR}/aclocal/*.m4 ${D}${datadir}/aclocal/
+ for i in `cat ${WORKDIR}/aclocal-files`; do
+ cp ${S}/gettext-tools/m4/$i ${D}${datadir}/aclocal/
+ done
install -d ${D}${datadir}/gettext/po/
- cp ${WORKDIR}/config.rpath ${D}${datadir}/gettext/
- cp ${WORKDIR}/Makefile.in.in ${D}${datadir}/gettext/po/
- cp ${WORKDIR}/remove-potcdate.sin ${D}${datadir}/gettext/po/
+ cp ${S}/build-aux/config.rpath ${D}${datadir}/gettext/
+ cp ${S}/gettext-runtime/po/Makefile.in.in ${D}${datadir}/gettext/po/
+ cp ${S}/gettext-runtime/po/remove-potcdate.sin ${D}${datadir}/gettext/po/
}
diff --git a/meta/recipes-core/gettext/gettext-sources.inc b/meta/recipes-core/gettext/gettext-sources.inc
new file mode 100644
index 00000000000..da2860fbc85
--- /dev/null
+++ b/meta/recipes-core/gettext/gettext-sources.inc
@@ -0,0 +1,4 @@
+HOMEPAGE = "http://www.gnu.org/software/gettext/gettext.html"
+SRC_URI = "${GNU_MIRROR}/gettext/gettext-${PV}.tar.gz \
+ "
+SRC_URI[sha256sum] = "e8c3650e1d8cee875c4f355642382c1df83058bd5a11ee8555c0cf276d646d45"
diff --git a/meta/recipes-core/gettext/gettext_0.21.1.bb b/meta/recipes-core/gettext/gettext_0.21.1.bb
index b80ea9276ef..22acd7b5926 100644
--- a/meta/recipes-core/gettext/gettext_0.21.1.bb
+++ b/meta/recipes-core/gettext/gettext_0.21.1.bb
@@ -3,7 +3,6 @@ DESCRIPTION = "GNU gettext is a set of tools that provides a framework to help o
These tools include a set of conventions about how programs should be written to support message catalogs, a directory and file \
naming organization for the message catalogs themselves, a runtime library supporting the retrieval of translated messages, and \
a few stand-alone programs to massage in various ways the sets of translatable and already translated strings."
-HOMEPAGE = "http://www.gnu.org/software/gettext/gettext.html"
SECTION = "libs"
LICENSE = "GPL-3.0-or-later & LGPL-2.1-or-later"
LIC_FILES_CHKSUM = "file://COPYING;md5=c678957b0c8e964aa6c70fd77641a71e"
@@ -22,7 +21,9 @@ DEPENDS:class-native = "gettext-minimal-native"
PROVIDES = "virtual/libintl virtual/gettext"
PROVIDES:class-native = "virtual/gettext-native"
RCONFLICTS:${PN} = "proxy-libintl"
-SRC_URI = "${GNU_MIRROR}/gettext/gettext-${PV}.tar.gz \
+
+require gettext-sources.inc
+SRC_URI += " \
file://parallel.patch \
file://use-pkgconfig.patch \
file://run-ptest \
@@ -30,7 +31,6 @@ SRC_URI = "${GNU_MIRROR}/gettext/gettext-${PV}.tar.gz \
file://0001-tests-autopoint-3-unset-MAKEFLAGS.patch \
file://0001-init-env.in-do-not-add-C-CXX-parameters.patch \
"
-SRC_URI[sha256sum] = "e8c3650e1d8cee875c4f355642382c1df83058bd5a11ee8555c0cf276d646d45"
inherit autotools texinfo pkgconfig ptest
--
2.30.2
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 14/21] strace: upgrade 6.3 -> 6.4
2023-07-27 14:36 [PATCH 01/21] meta: add missing summaries for image recipes Alexander Kanavin
` (11 preceding siblings ...)
2023-07-27 14:36 ` [PATCH 13/21] jquery: upgrade 3.6.3 -> 3.7.0 Alexander Kanavin
@ 2023-07-27 14:36 ` Alexander Kanavin
2023-07-27 14:36 ` [PATCH 15/21] sudo: update 1.9.13p3 -> 1.9.14p2 Alexander Kanavin
` (6 subsequent siblings)
19 siblings, 0 replies; 35+ messages in thread
From: Alexander Kanavin @ 2023-07-27 14:36 UTC (permalink / raw)
To: openembedded-core; +Cc: Alexander Kanavin
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
---
...e1392f5bd289239b755458dcdeeed69af1da.patch | 303 ------------------
...b541b258baec9eba674b5d8dc30007a61542.patch | 50 ---
...2f4494779e5c5f170ad10539bfc2dfafe967.patch | 50 ---
.../strace/{strace_6.3.bb => strace_6.4.bb} | 5 +-
4 files changed, 1 insertion(+), 407 deletions(-)
delete mode 100644 meta/recipes-devtools/strace/strace/00ace1392f5bd289239b755458dcdeeed69af1da.patch
delete mode 100644 meta/recipes-devtools/strace/strace/3bbfb541b258baec9eba674b5d8dc30007a61542.patch
delete mode 100644 meta/recipes-devtools/strace/strace/f31c2f4494779e5c5f170ad10539bfc2dfafe967.patch
rename meta/recipes-devtools/strace/{strace_6.3.bb => strace_6.4.bb} (88%)
diff --git a/meta/recipes-devtools/strace/strace/00ace1392f5bd289239b755458dcdeeed69af1da.patch b/meta/recipes-devtools/strace/strace/00ace1392f5bd289239b755458dcdeeed69af1da.patch
deleted file mode 100644
index bdf815e55e3..00000000000
--- a/meta/recipes-devtools/strace/strace/00ace1392f5bd289239b755458dcdeeed69af1da.patch
+++ /dev/null
@@ -1,303 +0,0 @@
-From 00ace1392f5bd289239b755458dcdeeed69af1da Mon Sep 17 00:00:00 2001
-From: "Dmitry V. Levin" <ldv@strace.io>
-Date: Mon, 26 Jun 2023 10:00:00 +0000
-Subject: [PATCH] tests: avoid accept() libc function when tracing accept()
- syscall
-
-The libc function is allowed to implement accept() using accept4()
-syscall, so migrate to accept4() those tests that trace accept() syscall
-but do not test accept() specifically, and change the test of accept()
-syscall to invoke either __NR_accept or __NR_socketcall(SYS_ACCEPT)
-directly.
-
-* tests/accept_compat.h: Remove.
-* tests/Makefile.am (EXTRA_DIST): Remove accept_compat.h.
-* tests/accept.c [TEST_SYSCALL_NAME]: Do not invoke accept(),
-call __NR_accept or __NR_socketcall if available, or skip the test.
-* tests/net-y-unix.c: Do not include "accept_compat.h".
-(main): Invoke accept4() instead of accept().
-* tests/net-yy-inet.c: Likewise.
-* tests/net-yy-unix.c: Likewise.
-
-Resolves: https://github.com/strace/strace/issues/260
-
-Upstream-Status: Backport
----
- tests/Makefile.am | 1 -
- tests/accept.c | 36 ++++++++++++++++++++----------------
- tests/accept_compat.h | 32 --------------------------------
- tests/net-y-unix.c | 16 ++++++++--------
- tests/net-yy-inet.c | 12 ++++++------
- tests/net-yy-unix.c | 16 ++++++++--------
- 6 files changed, 42 insertions(+), 71 deletions(-)
- delete mode 100644 tests/accept_compat.h
-
-Index: strace-6.3/tests/Makefile.am
-===================================================================
---- strace-6.3.orig/tests/Makefile.am
-+++ strace-6.3/tests/Makefile.am
-@@ -776,7 +776,6 @@ check_DATA = \
- # end of check_DATA
-
- EXTRA_DIST = \
-- accept_compat.h \
- attach-p-cmd.h \
- clock_adjtime-common.c \
- clock_xettime-common.c \
-Index: strace-6.3/tests/accept.c
-===================================================================
---- strace-6.3.orig/tests/accept.c
-+++ strace-6.3/tests/accept.c
-@@ -9,38 +9,36 @@
- */
-
- #include "tests.h"
--
-+#include "scno.h"
- #include <unistd.h>
-
--#include "scno.h"
-+#ifndef TEST_SYSCALL_NAME
-
--#if defined __NR_accept
-+# if defined __NR_accept || defined __NR_socketcall
-
--# ifndef TEST_SYSCALL_NAME
- # define TEST_SYSCALL_NAME do_accept
--
--# ifndef TEST_SYSCALL_STR
--# define TEST_SYSCALL_STR "accept"
--# endif
-+# define TEST_SYSCALL_STR "accept"
-
- static int
- do_accept(int sockfd, void *addr, void *addrlen)
- {
-+# ifdef __NR_accept
- return syscall(__NR_accept, sockfd, addr, addrlen);
-+# else /* __NR_socketcall */
-+ const long args[] = { sockfd, (long) addr, (long) addrlen };
-+ return syscall(__NR_socketcall, 5, args);
-+# endif
- }
--# endif /* !TEST_SYSCALL_NAME */
-
--#else /* !__NR_accept */
-+# endif /* __NR_accept || __NR_socketcall */
-
--# ifndef TEST_SYSCALL_NAME
--# define TEST_SYSCALL_NAME accept
--# endif
-+#endif /* !TEST_SYSCALL_NAME */
-
--#endif /* __NR_accept */
-+#ifdef TEST_SYSCALL_NAME
-
--#define TEST_SYSCALL_PREPARE connect_un()
-+# define TEST_SYSCALL_PREPARE connect_un()
- static void connect_un(void);
--#include "sockname.c"
-+# include "sockname.c"
-
- static void
- connect_un(void)
-@@ -90,3 +88,9 @@ main(void)
- puts("+++ exited with 0 +++");
- return 0;
- }
-+
-+#else
-+
-+SKIP_MAIN_UNDEFINED("__NR_accept || __NR_socketcall")
-+
-+#endif
-Index: strace-6.3/tests/accept_compat.h
-===================================================================
---- strace-6.3.orig/tests/accept_compat.h
-+++ /dev/null
-@@ -1,32 +0,0 @@
--/*
-- * Copyright (c) 2018-2019 The strace developers.
-- * All rights reserved.
-- *
-- * SPDX-License-Identifier: GPL-2.0-or-later
-- */
--
--#ifndef _STRACE_TESTS_ACCEPT_COMPAT_H_
--# define _STRACE_TESTS_ACCEPT_COMPAT_H_
--
--# include <unistd.h>
--# include <sys/socket.h>
--# include "scno.h"
--
--# if defined __NR_socketcall && defined __sparc__
--/*
-- * Work around the fact that
-- * - glibc >= 2.26 uses accept4 syscall to implement accept() call on sparc;
-- * - accept syscall had not been wired up on sparc until v4.4-rc8~4^2~1.
-- */
--static inline int
--do_accept(int sockfd, struct sockaddr *addr, socklen_t *addrlen)
--{
-- const long args[] = { sockfd, (long) addr, (long) addrlen };
--
-- return syscall(__NR_socketcall, 5, args);
--}
--# else
--# define do_accept accept
--# endif
--
--#endif /* !_STRACE_TESTS_ACCEPT_COMPAT_H_ */
-Index: strace-6.3/tests/net-y-unix.c
-===================================================================
---- strace-6.3.orig/tests/net-y-unix.c
-+++ strace-6.3/tests/net-y-unix.c
-@@ -10,6 +10,7 @@
-
- #include "tests.h"
- #include <assert.h>
-+#include <fcntl.h>
- #include <stddef.h>
- #include <stdio.h>
- #include <stdlib.h>
-@@ -18,8 +19,6 @@
- #include <sys/socket.h>
- #include <sys/un.h>
-
--#include "accept_compat.h"
--
- #define TEST_SOCKET "net-y-unix.socket"
-
- int
-@@ -88,12 +87,12 @@ main(void)
- struct sockaddr * const accept_sa = tail_alloc(sizeof(addr));
- memset(accept_sa, 0, sizeof(addr));
- *len = sizeof(addr);
-- int accept_fd = do_accept(listen_fd, accept_sa, len);
-+ int accept_fd = accept4(listen_fd, accept_sa, len, O_CLOEXEC);
- if (accept_fd < 0)
- perror_msg_and_fail("accept");
- unsigned long accept_inode = inode_of_sockfd(accept_fd);
-- printf("accept(%d<socket:[%lu]>, {sa_family=AF_UNIX}"
-- ", [%d => %d]) = %d<socket:[%lu]>\n",
-+ printf("accept4(%d<socket:[%lu]>, {sa_family=AF_UNIX}"
-+ ", [%d => %d], SOCK_CLOEXEC) = %d<socket:[%lu]>\n",
- listen_fd, listen_inode,
- (int) sizeof(addr), (int) *len,
- accept_fd, accept_inode);
-@@ -160,14 +159,15 @@ main(void)
-
- memset(accept_sa, 0, sizeof(addr));
- *len = sizeof(addr);
-- accept_fd = do_accept(listen_fd, accept_sa, len);
-+ accept_fd = accept4(listen_fd, accept_sa, len, O_CLOEXEC);
- if (accept_fd < 0)
- perror_msg_and_fail("accept");
- accept_inode = inode_of_sockfd(accept_fd);
- const char * const sun_path1 =
- ((struct sockaddr_un *) accept_sa)->sun_path + 1;
-- printf("accept(%d<socket:[%lu]>, {sa_family=AF_UNIX"
-- ", sun_path=@\"%s\"}, [%d => %d]) = %d<socket:[%lu]>\n",
-+ printf("accept4(%d<socket:[%lu]>, {sa_family=AF_UNIX"
-+ ", sun_path=@\"%s\"}, [%d => %d], SOCK_CLOEXEC)"
-+ " = %d<socket:[%lu]>\n",
- listen_fd, listen_inode, sun_path1,
- (int) sizeof(addr), (int) *len,
- accept_fd, accept_inode);
-Index: strace-6.3/tests/net-yy-inet.c
-===================================================================
---- strace-6.3.orig/tests/net-yy-inet.c
-+++ strace-6.3/tests/net-yy-inet.c
-@@ -10,6 +10,7 @@
-
- #include "tests.h"
- #include <assert.h>
-+#include <fcntl.h>
- #include <stddef.h>
- #include <stdio.h>
- #include <string.h>
-@@ -19,8 +20,6 @@
- #include <netinet/tcp.h>
- #include <arpa/inet.h>
-
--#include "accept_compat.h"
--
- #ifndef ADDR_FAMILY
- # define ADDR_FAMILY_FIELD sin_family
- # define ADDR_FAMILY AF_INET
-@@ -104,14 +103,15 @@ main(void)
- struct sockaddr * const accept_sa = tail_alloc(sizeof(addr));
- memset(accept_sa, 0, sizeof(addr));
- *len = sizeof(addr);
-- const int accept_fd = do_accept(listen_fd, accept_sa, len);
-+ const int accept_fd = accept4(listen_fd, accept_sa, len, O_CLOEXEC);
- if (accept_fd < 0)
- perror_msg_and_fail("accept");
- const unsigned int connect_port =
- ntohs(((struct SOCKADDR_TYPE *) accept_sa)->INPORT);
-- printf("accept(%d<" TCP_STR ":[" LOOPBACK ":%u]>, {sa_family=" AF_STR
-- ", " INPORT_STR "=htons(%u), " INADDR_STR SA_FIELDS "}"
-- ", [%u]) = %d<" TCP_STR ":[" LOOPBACK ":%u->" LOOPBACK ":%u]>\n",
-+ printf("accept4(%d<" TCP_STR ":[" LOOPBACK ":%u]>, {sa_family=" AF_STR
-+ ", " INPORT_STR "=htons(%u), " INADDR_STR SA_FIELDS "}, [%u]"
-+ ", SOCK_CLOEXEC) = %d<" TCP_STR ":[" LOOPBACK ":%u->" LOOPBACK
-+ ":%u]>\n",
- listen_fd, listen_port, connect_port, (unsigned) *len,
- accept_fd, listen_port, connect_port);
-
-Index: strace-6.3/tests/net-yy-unix.c
-===================================================================
---- strace-6.3.orig/tests/net-yy-unix.c
-+++ strace-6.3/tests/net-yy-unix.c
-@@ -10,6 +10,7 @@
-
- #include "tests.h"
- #include <assert.h>
-+#include <fcntl.h>
- #include <stddef.h>
- #include <stdio.h>
- #include <stdlib.h>
-@@ -22,8 +23,6 @@
- # include "xmalloc.h"
- #endif
-
--#include "accept_compat.h"
--
- #define TEST_SOCKET "net-yy-unix.socket"
-
- int
-@@ -112,12 +111,12 @@ main(void)
- struct sockaddr * const accept_sa = tail_alloc(sizeof(addr));
- memset(accept_sa, 0, sizeof(addr));
- *len = sizeof(addr);
-- int accept_fd = do_accept(listen_fd, accept_sa, len);
-+ int accept_fd = accept4(listen_fd, accept_sa, len, O_CLOEXEC);
- if (accept_fd < 0)
- perror_msg_and_fail("accept");
- unsigned long accept_inode = inode_of_sockfd(accept_fd);
-- printf("accept(%d<%s:[%lu,\"%s\"]>, {sa_family=AF_UNIX}"
-- ", [%d => %d]) = %d<%s:[%lu->%lu,\"%s\"]>\n",
-+ printf("accept4(%d<%s:[%lu,\"%s\"]>, {sa_family=AF_UNIX}"
-+ ", [%d => %d], SOCK_CLOEXEC) = %d<%s:[%lu->%lu,\"%s\"]>\n",
- listen_fd, sock_proto_name, listen_inode, TEST_SOCKET,
- (int) sizeof(addr), (int) *len,
- accept_fd, sock_proto_name, accept_inode, connect_inode,
-@@ -191,14 +190,15 @@ main(void)
-
- memset(accept_sa, 0, sizeof(addr));
- *len = sizeof(addr);
-- accept_fd = do_accept(listen_fd, accept_sa, len);
-+ accept_fd = accept4(listen_fd, accept_sa, len, O_CLOEXEC);
- if (accept_fd < 0)
- perror_msg_and_fail("accept");
- accept_inode = inode_of_sockfd(accept_fd);
- const char * const sun_path1 =
- ((struct sockaddr_un *) accept_sa)->sun_path + 1;
-- printf("accept(%d<%s:[%lu,\"%s\"]>, {sa_family=AF_UNIX"
-- ", sun_path=@\"%s\"}, [%d => %d]) = %d<%s:[%lu->%lu,\"%s\"]>\n",
-+ printf("accept4(%d<%s:[%lu,\"%s\"]>, {sa_family=AF_UNIX"
-+ ", sun_path=@\"%s\"}, [%d => %d], SOCK_CLOEXEC)"
-+ " = %d<%s:[%lu->%lu,\"%s\"]>\n",
- listen_fd, sock_proto_name, listen_inode, TEST_SOCKET,
- sun_path1, (int) sizeof(addr), (int) *len,
- accept_fd, sock_proto_name, accept_inode, connect_inode,
diff --git a/meta/recipes-devtools/strace/strace/3bbfb541b258baec9eba674b5d8dc30007a61542.patch b/meta/recipes-devtools/strace/strace/3bbfb541b258baec9eba674b5d8dc30007a61542.patch
deleted file mode 100644
index b4c6ff99de6..00000000000
--- a/meta/recipes-devtools/strace/strace/3bbfb541b258baec9eba674b5d8dc30007a61542.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 3bbfb541b258baec9eba674b5d8dc30007a61542 Mon Sep 17 00:00:00 2001
-From: "Dmitry V. Levin" <ldv@strace.io>
-Date: Wed, 21 Jun 2023 08:00:00 +0000
-Subject: [PATCH] net: enhance getsockopt decoding
-
-When getsockopt syscall fails the kernel sometimes updates the optlen
-argument, for example, NETLINK_LIST_MEMBERSHIPS updates it even if
-optval is not writable.
-
-* src/net.c (SYS_FUNC(getsockopt)): Try to fetch and print optlen
-argument on exiting syscall regardless of getsockopt exit status.
-
-Upstream-Status: Backport
----
- src/net.c | 15 ++++++++++++++-
- 1 file changed, 14 insertions(+), 1 deletion(-)
-
-diff --git a/src/net.c b/src/net.c
-index f68ccb947..7244b5e57 100644
---- a/src/net.c
-+++ b/src/net.c
-@@ -1038,7 +1038,7 @@ SYS_FUNC(getsockopt)
- } else {
- ulen = get_tcb_priv_ulong(tcp);
-
-- if (syserror(tcp) || umove(tcp, tcp->u_arg[4], &rlen) < 0) {
-+ if (umove(tcp, tcp->u_arg[4], &rlen) < 0) {
- /* optval */
- printaddr(tcp->u_arg[3]);
- tprint_arg_next();
-@@ -1047,6 +1047,19 @@ SYS_FUNC(getsockopt)
- tprint_indirect_begin();
- PRINT_VAL_D(ulen);
- tprint_indirect_end();
-+ } else if (syserror(tcp)) {
-+ /* optval */
-+ printaddr(tcp->u_arg[3]);
-+ tprint_arg_next();
-+
-+ /* optlen */
-+ tprint_indirect_begin();
-+ if (ulen != rlen) {
-+ PRINT_VAL_D(ulen);
-+ tprint_value_changed();
-+ }
-+ PRINT_VAL_D(rlen);
-+ tprint_indirect_end();
- } else {
- /* optval */
- print_getsockopt(tcp, tcp->u_arg[1], tcp->u_arg[2],
diff --git a/meta/recipes-devtools/strace/strace/f31c2f4494779e5c5f170ad10539bfc2dfafe967.patch b/meta/recipes-devtools/strace/strace/f31c2f4494779e5c5f170ad10539bfc2dfafe967.patch
deleted file mode 100644
index a0843836c21..00000000000
--- a/meta/recipes-devtools/strace/strace/f31c2f4494779e5c5f170ad10539bfc2dfafe967.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From f31c2f4494779e5c5f170ad10539bfc2dfafe967 Mon Sep 17 00:00:00 2001
-From: "Dmitry V. Levin" <ldv@strace.io>
-Date: Sat, 24 Jun 2023 08:00:00 +0000
-Subject: [PATCH] tests: update sockopt-sol_netlink test
-
-Update sockopt-sol_netlink test that started to fail, likely
-due to recent linux kernel commit f4e4534850a9 ("net/netlink: fix
-NETLINK_LIST_MEMBERSHIPS length report").
-
-* tests/sockopt-sol_netlink.c (main): Always print changing optlen value
-on exiting syscall.
-
-Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
----
- tests/sockopt-sol_netlink.c | 13 ++++++++++---
- 1 file changed, 10 insertions(+), 3 deletions(-)
-
-Upstream-Status: Backport
-
-diff --git a/tests/sockopt-sol_netlink.c b/tests/sockopt-sol_netlink.c
-index 82b98adc23..1c33219ac5 100644
---- a/tests/sockopt-sol_netlink.c
-+++ b/tests/sockopt-sol_netlink.c
-@@ -94,7 +94,10 @@ main(void)
- printf("%p", val);
- else
- printf("[%d]", *val);
-- printf(", [%d]) = %s\n", *len, errstr);
-+ printf(", [%d", (int) sizeof(*val));
-+ if ((int) sizeof(*val) != *len)
-+ printf(" => %d", *len);
-+ printf("]) = %s\n", errstr);
-
- /* optlen larger than necessary - shortened */
- *len = sizeof(*val) + 1;
-@@ -150,8 +153,12 @@ main(void)
- /* optval EFAULT - print address */
- *len = sizeof(*val);
- get_sockopt(fd, names[i].val, efault, len);
-- printf("getsockopt(%d, SOL_NETLINK, %s, %p, [%d]) = %s\n",
-- fd, names[i].str, efault, *len, errstr);
-+ printf("getsockopt(%d, SOL_NETLINK, %s, %p",
-+ fd, names[i].str, efault);
-+ printf(", [%d", (int) sizeof(*val));
-+ if ((int) sizeof(*val) != *len)
-+ printf(" => %d", *len);
-+ printf("]) = %s\n", errstr);
-
- /* optlen EFAULT - print address */
- get_sockopt(fd, names[i].val, val, len + 1);
diff --git a/meta/recipes-devtools/strace/strace_6.3.bb b/meta/recipes-devtools/strace/strace_6.4.bb
similarity index 88%
rename from meta/recipes-devtools/strace/strace_6.3.bb
rename to meta/recipes-devtools/strace/strace_6.4.bb
index a47cc717246..2174790fbe0 100644
--- a/meta/recipes-devtools/strace/strace_6.3.bb
+++ b/meta/recipes-devtools/strace/strace_6.4.bb
@@ -14,11 +14,8 @@ SRC_URI = "https://strace.io/files/${PV}/strace-${PV}.tar.xz \
file://skip-load.patch \
file://0001-configure-Use-autoconf-macro-to-detect-largefile-sup.patch \
file://0002-tests-Replace-off64_t-with-off_t.patch \
- file://00ace1392f5bd289239b755458dcdeeed69af1da.patch \
- file://f31c2f4494779e5c5f170ad10539bfc2dfafe967.patch \
- file://3bbfb541b258baec9eba674b5d8dc30007a61542.patch \
"
-SRC_URI[sha256sum] = "e17878e301506c1cc301611118ad14efee7f8bcef63b27ace5d290acce7bb731"
+SRC_URI[sha256sum] = "27987dbac57fdfd260c6db4dc8328df35c95c6867c8a3d4371d59cdcf4eb9238"
inherit autotools ptest
--
2.30.2
^ permalink raw reply related [flat|nested] 35+ messages in thread