* [OE-core][wrynose][PATCH 0/8] curl: Security fixes
@ 2026-08-05 8:30 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:30 ` [OE-core][wrynose][PATCH 1/8] curl: fix CVE-2026-8286 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
` (7 more replies)
0 siblings, 8 replies; 9+ messages in thread
From: Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco) @ 2026-08-05 8:30 UTC (permalink / raw)
To: openembedded-core
From: Deepak Rathore <deeratho@cisco.com>
This series addresses multiple curl security vulnerabilities affecting
the curl 8.19.0 version provided by the Wrynose branch.
Five changes backport upstream security fixes:
- CVE-2026-8286: Include TLS configuration when matching connections
that may be upgraded using STARTTLS.
- CVE-2026-8927: Clear Digest authentication state when an
environment-configured proxy changes.
- CVE-2026-8932: Include the complete mTLS client credential
configuration in connection reuse and TLS session-cache matching.
- CVE-2026-8458: Include the SASL service name in connection reuse
matching.
- CVE-2026-11856: Clear Digest authentication state when the origin,
proxy, or credentials change.
Three changes add CVE_STATUS annotations for vulnerabilities whose
applicability depends on the Wrynose curl configuration:
- CVE-2026-8924 is not applicable because the recipe explicitly builds
curl without Public Suffix List support using --without-libpsl.
- CVE-2026-9547 is not applicable because the vulnerable libssh backend
is not available in the recipe. The supported libssh2 backend is not
affected.
- CVE-2026-12064 is marked unpatched when the optional libssh2
PACKAGECONFIG is enabled and not-applicable-config otherwise, because
the affected SCP/SFTP support is provided through libssh2.
The manual adaptations required for curl 8.19.0 are documented in the
Backport Changes sections of the corresponding source patches.
Validation performed:
- All the curl patches are prepared on top of this upstream curl patch which is
under review: https://lists.openembedded.org/g/openembedded-core/topic/120530931
- All recipe changes apply using git am without three-way fallback.
- All existing Wrynose patches and the proposed source patches apply to
the checksum-verified curl 8.19.0 source with no fuzz.
- A host build using the GnuTLS backend completed successfully.
- Regression tests 1686, 3303, and 3304 passed.
Deepak Rathore (8):
curl: fix CVE-2026-8286
curl: set CVE_STATUS for CVE-2026-8924
curl: fix CVE-2026-8927
curl: fix CVE-2026-8932
curl: fix CVE-2026-8458
curl: fix CVE-2026-11856
curl: set CVE_STATUS for CVE-2026-9547
curl: set CVE_STATUS for CVE-2026-12064
.../curl/curl/CVE-2026-11856_p1.patch | 372 ++++++
.../curl/curl/CVE-2026-11856_p2.patch | 72 ++
.../curl/curl/CVE-2026-8286.patch | 81 ++
.../curl/curl/CVE-2026-8458.patch | 202 +++
.../curl/curl/CVE-2026-8927.patch | 349 +++++
.../curl/curl/CVE-2026-8932-dependent.patch | 71 +
.../curl/curl/CVE-2026-8932.patch | 1148 +++++++++++++++++
meta/recipes-support/curl/curl_8.19.0.bb | 11 +
8 files changed, 2306 insertions(+)
create mode 100644 meta/recipes-support/curl/curl/CVE-2026-11856_p1.patch
create mode 100644 meta/recipes-support/curl/curl/CVE-2026-11856_p2.patch
create mode 100644 meta/recipes-support/curl/curl/CVE-2026-8286.patch
create mode 100644 meta/recipes-support/curl/curl/CVE-2026-8458.patch
create mode 100644 meta/recipes-support/curl/curl/CVE-2026-8927.patch
create mode 100644 meta/recipes-support/curl/curl/CVE-2026-8932-dependent.patch
create mode 100644 meta/recipes-support/curl/curl/CVE-2026-8932.patch
--
2.35.6
^ permalink raw reply [flat|nested] 9+ messages in thread
* [OE-core][wrynose][PATCH 1/8] curl: fix CVE-2026-8286
2026-08-05 8:30 [OE-core][wrynose][PATCH 0/8] curl: Security fixes Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
@ 2026-08-05 8:30 ` Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:30 ` [OE-core][wrynose][PATCH 2/8] curl: set CVE_STATUS for CVE-2026-8924 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco) @ 2026-08-05 8:30 UTC (permalink / raw)
To: openembedded-core
From: Deepak Rathore <deeratho@cisco.com>
This patch applies the upstream curl security fix backport for
CVE-2026-8286. The upstream fix commit is referenced in [1],
and the public curl advisory is referenced in [2]. The backported
commit link is also recorded in the embedded patch header.
[1] https://github.com/curl/curl/commit/a86efdd7ca5433de9231e650f18247de8319ad16
[2] https://curl.se/docs/CVE-2026-8286.html
Signed-off-by: Deepak Rathore <deeratho@cisco.com>
---
.../curl/curl/CVE-2026-8286.patch | 81 +++++++++++++++++++
meta/recipes-support/curl/curl_8.19.0.bb | 1 +
2 files changed, 82 insertions(+)
create mode 100644 meta/recipes-support/curl/curl/CVE-2026-8286.patch
diff --git a/meta/recipes-support/curl/curl/CVE-2026-8286.patch b/meta/recipes-support/curl/curl/CVE-2026-8286.patch
new file mode 100644
index 0000000000..6fa42887a1
--- /dev/null
+++ b/meta/recipes-support/curl/curl/CVE-2026-8286.patch
@@ -0,0 +1,81 @@
+From 90ff17f6bfe1d358c26fa25ab457bc420a9847b2 Mon Sep 17 00:00:00 2001
+From: Stefan Eissing <stefan@eissing.org>
+Date: Thu, 7 May 2026 10:30:07 +0200
+Subject: [PATCH] url: fix connection reuse for starttls protocols
+
+When a connection is tested for reuse in a transfer that *may* upgrade
+to TLS (commonly via STARTTLS), the SSL configuration must match the
+existing connection.
+
+Reported-by: Andrew Nesbit
+Closes #21522
+
+CVE: CVE-2026-8286
+Upstream-Status: Backport [https://github.com/curl/curl/commit/a86efdd7ca5433de9231e650f18247de8319ad16]
+
+Backport Changes:
+- Wrynose applies upstream commit [1] before this patch. That commit
+ adds req_tls to struct url_conn_match and initializes it in
+ url_attach_existing().
+- This backport replaces that local req_tls state with the upstream
+ may_tls/require_tls split and updates url_match_ssl_use(),
+ url_match_ssl_config(), and url_attach_existing() to preserve the
+ upstream STARTTLS reuse behavior on the Wrynose 8.19.0 codebase.
+
+[1] https://github.com/curl/curl/commit/507e7be573b0a76fca597b75ff7cb27a66e7d865
+
+(cherry picked from commit a86efdd7ca5433de9231e650f18247de8319ad16)
+Signed-off-by: Deepak Rathore <deeratho@cisco.com>
+---
+ lib/url.c | 15 ++++++++++-----
+ 1 file changed, 10 insertions(+), 5 deletions(-)
+
+diff --git a/lib/url.c b/lib/url.c
+index 4ebff50ef1..6c1375f8e3 100644
+--- a/lib/url.c
++++ b/lib/url.c
+@@ -745,7 +745,11 @@ struct url_conn_match {
+ BIT(want_proxy_ntlm_http);
+ BIT(want_nego_http);
+ BIT(want_proxy_nego_http);
+- BIT(req_tls); /* require TLS use from a clear-text start */
++ BIT(may_tls); /* May upgrade clear-text connection to TLS, can only reuse
++ * connections that have matching TLS configuration.
++ * Always TRUE if `req_tls` is TRUE. */
++ BIT(require_tls); /* Requires TLS use from a clear-text start, can only
++ * reuse connections that have TLS. */
+ BIT(wait_pipe);
+ BIT(force_reuse);
+ BIT(seen_pending_conn);
+@@ -897,7 +901,7 @@ static bool url_match_ssl_use(struct connectdata *conn,
+ (get_protocol_family(conn->scheme) != m->needle->scheme->protocol))
+ return FALSE;
+ }
+- else if(m->req_tls)
++ else if(m->require_tls)
+ /* a clear-text STARTTLS protocol with required TLS */
+ return FALSE;
+ return TRUE;
+@@ -1090,8 +1094,8 @@ static bool url_match_destination(struct connectdata *conn,
+ static bool url_match_ssl_config(struct connectdata *conn,
+ struct url_conn_match *m)
+ {
+- /* If talking TLS, conn needs to use the same SSL options. */
+- if((m->needle->scheme->flags & PROTOPT_SSL) &&
++ /* If talking/upgrading to TLS, conn needs to use the same SSL options. */
++ if(((m->needle->scheme->flags & PROTOPT_SSL) || m->may_tls) &&
+ !Curl_ssl_conn_config_match(m->data, conn, FALSE)) {
+ DEBUGF(infof(m->data, "Connection #%" FMT_OFF_T
+ " has different SSL parameters, cannot reuse",
+@@ -1364,7 +1368,8 @@ static bool url_attach_existing(struct Curl_easy *data,
+ (needle->scheme->protocol & PROTO_FAMILY_HTTP);
+ #endif
+ #endif
+- match.req_tls = data->set.use_ssl >= CURLUSESSL_CONTROL;
++ match.require_tls = data->set.use_ssl >= CURLUSESSL_CONTROL;
++ match.may_tls = data->set.use_ssl > CURLUSESSL_NONE;
+
+ /* Find a connection in the pool that matches what "data + needle"
+ * requires. If a suitable candidate is found, it is attached to "data". */
+--
+2.35.6
diff --git a/meta/recipes-support/curl/curl_8.19.0.bb b/meta/recipes-support/curl/curl_8.19.0.bb
index 5ba881bd76..ae57776eab 100644
--- a/meta/recipes-support/curl/curl_8.19.0.bb
+++ b/meta/recipes-support/curl/curl_8.19.0.bb
@@ -23,6 +23,7 @@ SRC_URI = " \
file://CVE-2026-6429.patch \
file://CVE-2026-7168.patch \
file://CVE-2026-4873.patch \
+ file://CVE-2026-8286.patch \
"
SRC_URI:append:class-nativesdk = " \
--
2.35.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [OE-core][wrynose][PATCH 2/8] curl: set CVE_STATUS for CVE-2026-8924
2026-08-05 8:30 [OE-core][wrynose][PATCH 0/8] curl: Security fixes Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:30 ` [OE-core][wrynose][PATCH 1/8] curl: fix CVE-2026-8286 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
@ 2026-08-05 8:30 ` Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:30 ` [OE-core][wrynose][PATCH 3/8] curl: fix CVE-2026-8927 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco) @ 2026-08-05 8:30 UTC (permalink / raw)
To: openembedded-core
From: Deepak Rathore <deeratho@cisco.com>
Analysis:
- CVE-2026-8924 protects cookie domain handling when public
suffix list support is enabled in curl. [1]
- Wrynose curl 8.19.0 is configured with --without-libpsl,
so the PSL check path is not built by the default recipe. [2]
- Hence mark this CVE as not-applicable-config for the default
Wrynose recipe configuration.
Reference:
[1] https://curl.se/docs/CVE-2026-8924.html
[2] https://git.openembedded.org/openembedded-core/tree/meta/recipes-support/curl/curl_8.19.0.bb?h=wrynose
Signed-off-by: Deepak Rathore <deeratho@cisco.com>
---
meta/recipes-support/curl/curl_8.19.0.bb | 1 +
1 file changed, 1 insertion(+)
diff --git a/meta/recipes-support/curl/curl_8.19.0.bb b/meta/recipes-support/curl/curl_8.19.0.bb
index ae57776eab..5bec405eb7 100644
--- a/meta/recipes-support/curl/curl_8.19.0.bb
+++ b/meta/recipes-support/curl/curl_8.19.0.bb
@@ -35,6 +35,7 @@ SRC_URI[sha256sum] = "4eb41489790d19e190d7ac7e18e82857cdd68af8f4e66b292ced562d33
# Curl has used many names over the years...
CVE_PRODUCT = "haxx:curl haxx:libcurl curl:curl curl:libcurl libcurl:libcurl daniel_stenberg:curl"
CVE_STATUS[CVE-2024-32928] = "ignored: CURLOPT_SSL_VERIFYPEER was disabled on google cloud services causing a potential man in the middle attack"
+CVE_STATUS[CVE-2026-8924] = "not-applicable-config: public suffix list support is disabled by the recipe with --without-libpsl"
CVE_STATUS[CVE-2026-10536] = "${@bb.utils.contains('PACKAGECONFIG', 'nghttp2', 'unpatched', 'not-applicable-config: applicable only with HTTP/2', d)}"
inherit autotools pkgconfig binconfig multilib_header ptest
--
2.35.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [OE-core][wrynose][PATCH 3/8] curl: fix CVE-2026-8927
2026-08-05 8:30 [OE-core][wrynose][PATCH 0/8] curl: Security fixes Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:30 ` [OE-core][wrynose][PATCH 1/8] curl: fix CVE-2026-8286 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:30 ` [OE-core][wrynose][PATCH 2/8] curl: set CVE_STATUS for CVE-2026-8924 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
@ 2026-08-05 8:30 ` Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:30 ` [OE-core][wrynose][PATCH 4/8] curl: fix CVE-2026-8932 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco) @ 2026-08-05 8:30 UTC (permalink / raw)
To: openembedded-core
From: Deepak Rathore <deeratho@cisco.com>
This patch applies the upstream curl security fix backport for
CVE-2026-8927. The upstream fix commit is referenced in [1],
and the public curl advisory is referenced in [2]. The backported
commit link is also recorded in the embedded patch header.
[1] https://github.com/curl/curl/commit/5c225384b8d52c67ce8259c6e4203bc57aacb567
[2] https://curl.se/docs/CVE-2026-8927.html
Signed-off-by: Deepak Rathore <deeratho@cisco.com>
---
.../curl/curl/CVE-2026-8927.patch | 349 ++++++++++++++++++
meta/recipes-support/curl/curl_8.19.0.bb | 1 +
2 files changed, 350 insertions(+)
create mode 100644 meta/recipes-support/curl/curl/CVE-2026-8927.patch
diff --git a/meta/recipes-support/curl/curl/CVE-2026-8927.patch b/meta/recipes-support/curl/curl/CVE-2026-8927.patch
new file mode 100644
index 0000000000..653d908eb5
--- /dev/null
+++ b/meta/recipes-support/curl/curl/CVE-2026-8927.patch
@@ -0,0 +1,349 @@
+From c3e9c57b5cd128f33250caf86184e23dc1e8c4e5 Mon Sep 17 00:00:00 2001
+From: Daniel Stenberg <daniel@haxx.se>
+Date: Thu, 30 Jul 2026 04:29:18 -0700
+Subject: [PATCH] url: detect proxy changes read from environment
+
+When a proxy is set from an environment variable, detect if that proxy
+is not the same as previously and flush state.
+
+Verified by test1647: verify changing proxy with env variables and make
+sure Digest state is flushed in the second use
+
+Closes #21666
+
+CVE: CVE-2026-8927
+Upstream-Status: Backport [https://github.com/curl/curl/commit/5c225384b8d52c67ce8259c6e4203bc57aacb567]
+
+Backport Changes:
+- Kept Wrynose test registry ordering and added only the new upstream
+ test1647/lib1647 regression test entries.
+- Added the explicit vauth/vauth.h include because Wrynose's url.c did
+ not already include the Digest cleanup prototype used by this fix.
+- Placed the env proxy comparison before parse_proxy() because Wrynose
+ frees the temporary proxy string immediately after parse_proxy() copies
+ it.
+
+(cherry picked from commit 5c225384b8d52c67ce8259c6e4203bc57aacb567)
+Signed-off-by: Deepak Rathore <deeratho@cisco.com>
+---
+ lib/url.c | 12 ++++
+ lib/urldata.h | 1 +
+ tests/data/Makefile.am | 2 +-
+ tests/data/test1647 | 103 +++++++++++++++++++++++++++++++
+ tests/libtest/Makefile.inc | 1 +
+ tests/libtest/lib1647.c | 120 +++++++++++++++++++++++++++++++++++++
+ 6 files changed, 238 insertions(+), 1 deletion(-)
+ create mode 100644 tests/data/test1647
+ create mode 100644 tests/libtest/lib1647.c
+
+diff --git a/lib/url.c b/lib/url.c
+index 6c1375f8e3..1cd3955e64 100644
+--- a/lib/url.c
++++ b/lib/url.c
+@@ -99,6 +99,7 @@
+ #include "headers.h"
+ #include "curlx/strerr.h"
+ #include "curlx/strparse.h"
++#include "vauth/vauth.h"
+
+ /* And now for the protocols */
+ #include "ftp.h"
+@@ -326,6 +327,9 @@ CURLcode Curl_close(struct Curl_easy **datap)
+ Curl_freeset(data);
+ Curl_headers_cleanup(data);
+ Curl_netrc_cleanup(&data->state.netrc);
++#ifndef CURL_DISABLE_DIGEST_AUTH
++ curlx_free(data->state.envproxy);
++#endif
+ curlx_free(data);
+ return CURLE_OK;
+ }
+@@ -2354,6 +2358,14 @@ static CURLcode create_conn_helper_init_proxy(struct Curl_easy *data,
+ if(proxy || socksproxy) {
+ long ptype = conn->http_proxy.proxytype;
+ if(proxy) {
++#ifndef CURL_DISABLE_DIGEST_AUTH
++ if(!Curl_safecmp(data->state.envproxy, proxy)) {
++ /* proxy changed */
++ Curl_auth_digest_cleanup(&data->state.proxydigest);
++ curlx_free(data->state.envproxy);
++ data->state.envproxy = curlx_strdup(proxy);
++ }
++#endif
+ result = parse_proxy(data, conn, proxy, ptype);
+ Curl_safefree(proxy); /* parse_proxy copies the proxy string */
+ if(result)
+diff --git a/lib/urldata.h b/lib/urldata.h
+index d71337c8f6..65005c4b34 100644
+--- a/lib/urldata.h
++++ b/lib/urldata.h
+@@ -959,6 +959,7 @@ struct UrlState {
+ void (*prev_signal)(int sig);
+ #endif
+ #ifndef CURL_DISABLE_DIGEST_AUTH
++ char *envproxy; /* last proxy string used for proxy-related state */
+ struct digestdata digest; /* state data for host Digest auth */
+ struct digestdata proxydigest; /* state data for proxy Digest auth */
+ #endif
+diff --git a/tests/data/Makefile.am b/tests/data/Makefile.am
+index 1e84b26820..bcee03b938 100644
+--- a/tests/data/Makefile.am
++++ b/tests/data/Makefile.am
+@@ -218,7 +218,7 @@ test1620 test1621 test1622 test1623 test1624 \
+ \
+ test1630 test1631 test1632 test1633 test1634 test1635 test1636 test1637 \
+ \
+-test1640 test1641 test1642 test1643 \
++test1640 test1641 test1642 test1643 test1647 \
+ \
+ test1650 test1651 test1652 test1653 test1654 test1655 test1656 test1657 \
+ test1658 \
+diff --git a/tests/data/test1647 b/tests/data/test1647
+new file mode 100644
+index 0000000000..a87487fa9f
+--- /dev/null
++++ b/tests/data/test1647
+@@ -0,0 +1,103 @@
++<?xml version="1.0" encoding="US-ASCII"?>
++<testcase>
++<info>
++<keywords>
++HTTP
++HTTP GET
++HTTP proxy
++HTTP proxy Digest auth
++multi
++</keywords>
++</info>
++
++# Server-side
++<reply>
++
++# this is returned first since we get no proxy-auth
++<data crlf="headers" nocheck="yes">
++HTTP/1.1 407 Authorization Required to proxy me my dear
++Proxy-Authenticate: Digest realm="weirdorealm", nonce="12345"
++Content-Length: 33
++
++And you should ignore this data.
++</data>
++
++# then this is returned when we get proxy-auth
++<data1000 crlf="headers">
++HTTP/1.1 200 OK
++Content-Length: 21
++Server: no
++
++Nice proxy auth sir!
++</data1000>
++
++<connect crlf="headers">
++HTTP/1.1 401 OK
++Content-Length: 21
++Server: no
++
++Denied access. Leave
++</connect>
++
++</reply>
++
++# Client-side
++<client>
++<server>
++http
++https-proxy
++https
++</server>
++# tool is what to use instead of 'curl'
++<tool>
++lib%TESTNUMBER
++</tool>
++<features>
++!SSPI
++crypto
++proxy
++digest
++Debug
++</features>
++<setenv>
++http_proxy=%HOSTIP:%HTTPPORT
++https_proxy=https://%HOSTIP:%HTTPSPROXYPORT
++CURL_ENTROPY=99376
++</setenv>
++<name>
++HTTP proxy auth Digest, then change proxy with env var and do it again
++</name>
++<command>
++http://test.remote.example.com/path/%TESTNUMBER https://another.example.com:%HTTPSPORT/ daniel:monkey123 another:bump456
++</command>
++</client>
++
++# Verify data after the test has been "shot"
++<verify>
++<protocol crlf="headers">
++GET http://test.remote.example.com/path/%TESTNUMBER HTTP/1.1
++Host: test.remote.example.com
++Accept: */*
++Proxy-Connection: Keep-Alive
++
++GET http://test.remote.example.com/path/%TESTNUMBER HTTP/1.1
++Host: test.remote.example.com
++Proxy-Authorization: Digest username="daniel", realm="weirdorealm", nonce="12345", uri="/path/%TESTNUMBER", response="7a1672891aff03248887b1a6674b8096"
++Accept: */*
++Proxy-Connection: Keep-Alive
++
++</protocol>
++
++<proxy crlf="headers">
++CONNECT another.example.com:%HTTPSPORT HTTP/1.1
++Host: another.example.com:%HTTPSPORT
++Proxy-Connection: Keep-Alive
++
++</proxy>
++
++# CONNECT fails
++<errorcode>
++7
++</errorcode>
++</verify>
++</testcase>
+diff --git a/tests/libtest/Makefile.inc b/tests/libtest/Makefile.inc
+index 96b82bc059..e938b87bc5 100644
+--- a/tests/libtest/Makefile.inc
++++ b/tests/libtest/Makefile.inc
+@@ -100,6 +100,7 @@ TESTS_C = \
+ lib1582.c lib1588.c \
+ lib1591.c lib1592.c lib1593.c lib1594.c lib1597.c \
+ lib1598.c lib1599.c \
++ lib1647.c \
+ lib1662.c \
+ lib1900.c lib1901.c lib1902.c lib1903.c lib1905.c lib1906.c lib1907.c \
+ lib1908.c lib1910.c lib1911.c lib1912.c lib1913.c \
+diff --git a/tests/libtest/lib1647.c b/tests/libtest/lib1647.c
+new file mode 100644
+index 0000000000..8060e1bfe9
+--- /dev/null
++++ b/tests/libtest/lib1647.c
+@@ -0,0 +1,120 @@
++/***************************************************************************
++ * _ _ ____ _
++ * Project ___| | | | _ \| |
++ * / __| | | | |_) | |
++ * | (__| |_| | _ <| |___
++ * \___|\___/|_| \_\_____|
++ *
++ * Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
++ *
++ * This software is licensed as described in the file COPYING, which
++ * you should have received as part of this distribution. The terms
++ * are also available at https://curl.se/docs/copyright.html.
++ *
++ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
++ * copies of the Software, and permit persons to whom the Software is
++ * furnished to do so, under the terms of the COPYING file.
++ *
++ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
++ * KIND, either express or implied.
++ *
++ * SPDX-License-Identifier: curl
++ *
++ ***************************************************************************/
++/*
++ * argv1 = the first URL
++ * argv2 = URL2
++ * argv3 = credentials 1
++ * argv4 = credentials 2
++ */
++
++#include "first.h"
++
++/* this is meant to pick up the proxy from the environment variable */
++static CURLcode init1647(CURL *curl, const char *url, const char *userpwd)
++{
++ CURLcode result = CURLE_OK;
++
++ res_easy_setopt(curl, CURLOPT_URL, url);
++ if(result)
++ goto init_failed;
++
++ res_easy_setopt(curl, CURLOPT_PROXYUSERPWD, userpwd);
++ if(result)
++ goto init_failed;
++
++ res_easy_setopt(curl, CURLOPT_PROXYAUTH, CURLAUTH_DIGEST);
++ if(result)
++ goto init_failed;
++
++ res_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0L);
++ if(result)
++ goto init_failed;
++
++ res_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L);
++ if(result)
++ goto init_failed;
++
++ res_easy_setopt(curl, CURLOPT_PROXY_SSL_VERIFYPEER, 0L);
++ if(result)
++ goto init_failed;
++
++ res_easy_setopt(curl, CURLOPT_PROXY_SSL_VERIFYHOST, 0L);
++ if(result)
++ goto init_failed;
++
++ res_easy_setopt(curl, CURLOPT_VERBOSE, 1L);
++ if(result)
++ goto init_failed;
++
++ return CURLE_OK; /* success */
++
++init_failed:
++ return result; /* failure */
++}
++
++static CURLcode run1647(CURL *curl, const char *url, const char *userpwd)
++{
++ CURLcode result = CURLE_OK;
++
++ result = init1647(curl, url, userpwd);
++ if(result)
++ return result;
++
++ return curl_easy_perform(curl);
++}
++
++static CURLcode test_lib1647(const char *URL)
++{
++ CURLcode result = CURLE_OK;
++ CURL *curl = NULL;
++
++ res_global_init(CURL_GLOBAL_ALL);
++ if(result)
++ return result;
++
++ curl = curl_easy_init();
++ if(!curl) {
++ curl_mfprintf(stderr, "curl_easy_init() failed\n");
++ curl_global_cleanup();
++ return TEST_ERR_MAJOR_BAD;
++ }
++
++ start_test_timing();
++
++ curl_mprintf("--- First get '%s'\n", URL);
++ result = run1647(curl, URL, libtest_arg3);
++ if(result)
++ goto test_cleanup;
++
++ curl_mprintf("--- Then get '%s'\n", libtest_arg2);
++ result = run1647(curl, libtest_arg2, libtest_arg4);
++
++test_cleanup:
++
++ /* proper cleanup sequence - type PB */
++
++ curl_easy_cleanup(curl);
++ curl_global_cleanup();
++ return result;
++}
+--
+2.35.6
diff --git a/meta/recipes-support/curl/curl_8.19.0.bb b/meta/recipes-support/curl/curl_8.19.0.bb
index 5bec405eb7..193366f657 100644
--- a/meta/recipes-support/curl/curl_8.19.0.bb
+++ b/meta/recipes-support/curl/curl_8.19.0.bb
@@ -24,6 +24,7 @@ SRC_URI = " \
file://CVE-2026-7168.patch \
file://CVE-2026-4873.patch \
file://CVE-2026-8286.patch \
+ file://CVE-2026-8927.patch \
"
SRC_URI:append:class-nativesdk = " \
--
2.35.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [OE-core][wrynose][PATCH 4/8] curl: fix CVE-2026-8932
2026-08-05 8:30 [OE-core][wrynose][PATCH 0/8] curl: Security fixes Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
` (2 preceding siblings ...)
2026-08-05 8:30 ` [OE-core][wrynose][PATCH 3/8] curl: fix CVE-2026-8927 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
@ 2026-08-05 8:30 ` Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:31 ` [OE-core][wrynose][PATCH 5/8] curl: fix CVE-2026-8458 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco) @ 2026-08-05 8:30 UTC (permalink / raw)
To: openembedded-core
From: Deepak Rathore <deeratho@cisco.com>
This patch applies the upstream curl security fix backport for
CVE-2026-8932. The upstream dependency commit is referenced
in [1], the upstream fix commit is referenced in [2], and the
public curl advisory is referenced in [3]. The individual
backported commit links are recorded in the embedded patch
headers.
[1] https://github.com/curl/curl/commit/67bf021e97bbebadade7e40217a4967042ac6a07
[2] https://github.com/curl/curl/commit/7541ae569d82fb308a5e2d94916027da4fa3ba3e
[3] https://curl.se/docs/CVE-2026-8932.html
Signed-off-by: Deepak Rathore <deeratho@cisco.com>
---
.../curl/curl/CVE-2026-8932-dependent.patch | 71 +
.../curl/curl/CVE-2026-8932.patch | 1148 +++++++++++++++++
meta/recipes-support/curl/curl_8.19.0.bb | 2 +
3 files changed, 1221 insertions(+)
create mode 100644 meta/recipes-support/curl/curl/CVE-2026-8932-dependent.patch
create mode 100644 meta/recipes-support/curl/curl/CVE-2026-8932.patch
diff --git a/meta/recipes-support/curl/curl/CVE-2026-8932-dependent.patch b/meta/recipes-support/curl/curl/CVE-2026-8932-dependent.patch
new file mode 100644
index 0000000000..c64ced329a
--- /dev/null
+++ b/meta/recipes-support/curl/curl/CVE-2026-8932-dependent.patch
@@ -0,0 +1,71 @@
+From a79f8dae1aa632155be430143b4685f0b91d1694 Mon Sep 17 00:00:00 2001
+From: Daniel Stenberg <daniel@haxx.se>
+Date: Wed, 6 May 2026 23:59:22 +0200
+Subject: [PATCH] mbedtls: null terminate the private key blob
+
+Unfortunately, mbedtls_pk_parse_key() requires the data to be
+null-terminated if the data is PEM encoded (even when provided the exact
+length), so this function needs to make a copy that has one.
+
+Reported-by: Elise Vance
+Closes #21515
+
+CVE: CVE-2026-8932
+Upstream-Status: Backport [https://github.com/curl/curl/commit/67bf021e97bbebadade7e40217a4967042ac6a07]
+
+Backport Changes:
+- Added as a prerequisite for upstream commit [1] because Wrynose curl
+ 8.19.0 did not already contain this mbedTLS private-key blob fix.
+
+[1] https://github.com/curl/curl/commit/7541ae569d82fb308a5e2d94916027da4fa3ba3e
+
+(cherry picked from commit 67bf021e97bbebadade7e40217a4967042ac6a07)
+Signed-off-by: Deepak Rathore <deeratho@cisco.com>
+---
+ lib/vtls/mbedtls.c | 15 +++++++++++----
+ 1 file changed, 11 insertions(+), 4 deletions(-)
+
+diff --git a/lib/vtls/mbedtls.c b/lib/vtls/mbedtls.c
+index 2bac406c35..54f0ac9fd4 100644
+--- a/lib/vtls/mbedtls.c
++++ b/lib/vtls/mbedtls.c
+@@ -697,11 +697,17 @@ static CURLcode mbed_load_privkey(struct Curl_cfilter *cf,
+ }
+ else {
+ const struct curl_blob *ssl_key_blob = ssl_config->key_blob;
+- const unsigned char *key_data =
+- (const unsigned char *)ssl_key_blob->data;
+ const char *passwd = ssl_config->key_passwd;
++ /* Unfortunately, mbedtls_pk_parse_key() requires the data to be
++ null-terminated if the data is PEM encoded (even when provided the
++ exact length). */
++ unsigned char *newblob = curlx_memdup0(ssl_key_blob->data,
++ ssl_key_blob->len);
++ if(!newblob)
++ return CURLE_OUT_OF_MEMORY;
++
+ #if MBEDTLS_VERSION_NUMBER >= 0x04000000
+- ret = mbedtls_pk_parse_key(&backend->pk, key_data, ssl_key_blob->len,
++ ret = mbedtls_pk_parse_key(&backend->pk, newblob, ssl_key_blob->len,
+ (const unsigned char *)passwd,
+ passwd ? strlen(passwd) : 0);
+ if(ret == 0 &&
+@@ -713,7 +719,7 @@ static CURLcode mbed_load_privkey(struct Curl_cfilter *cf,
+ PSA_KEY_USAGE_SIGN_HASH)))
+ ret = MBEDTLS_ERR_PK_TYPE_MISMATCH;
+ #else
+- ret = mbedtls_pk_parse_key(&backend->pk, key_data, ssl_key_blob->len,
++ ret = mbedtls_pk_parse_key(&backend->pk, newblob, ssl_key_blob->len,
+ (const unsigned char *)passwd,
+ passwd ? strlen(passwd) : 0,
+ mbedtls_ctr_drbg_random,
+@@ -722,6 +728,7 @@ static CURLcode mbed_load_privkey(struct Curl_cfilter *cf,
+ mbedtls_pk_can_do(&backend->pk, MBEDTLS_PK_ECKEY)))
+ ret = MBEDTLS_ERR_PK_TYPE_MISMATCH;
+ #endif
++ curlx_free(newblob);
+
+ if(ret) {
+ mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
+--
+2.35.6
diff --git a/meta/recipes-support/curl/curl/CVE-2026-8932.patch b/meta/recipes-support/curl/curl/CVE-2026-8932.patch
new file mode 100644
index 0000000000..8fec1a5adb
--- /dev/null
+++ b/meta/recipes-support/curl/curl/CVE-2026-8932.patch
@@ -0,0 +1,1148 @@
+From c1cf1ddf723cdfcbd071394a6b4e73ea995e100a Mon Sep 17 00:00:00 2001
+From: Joshua Rogers <MegaManSec@users.noreply.github.com>
+Date: Tue, 14 Jul 2026 04:38:15 -0700
+Subject: [PATCH] tls: fix incomplete mTLS config in conn reuse and session
+ cache
+
+cert_type, key, key_type, key_passwd and key_blob lived in
+ssl_config_data but not in ssl_primary_config, so they were invisible to
+match_ssl_primary_config() and to the TLS session cache peer key.
+
+Two easy handles sharing a connection pool could reuse each other's
+authenticated connections when they differed only on SSLKEY, SSLKEYTYPE,
+KEYPASSWD, SSLCERTTYPE or SSLKEYBLOB. The second handle would silently
+inherit the first handle's authenticated identity.
+
+Promote all five fields into ssl_primary_config so the conn-reuse
+predicate and session cache key cover the complete client credential
+set. Also replace the fixed ":CCERT" session cache marker with the
+actual clientcert path so sessions are not shared across different
+client certificates.
+
+Verified by test 3303 and 3304
+
+Reported-By: Joshua Rogers (AISLE Research)
+Closes #21667
+
+CVE: CVE-2026-8932
+Upstream-Status: Backport [https://github.com/curl/curl/commit/7541ae569d82fb308a5e2d94916027da4fa3ba3e]
+
+Backport Changes:
+- Split prerequisite upstream commit [1] before this patch. This patch
+ now applies on top of that dependency and does not fold in the
+ mbedTLS private-key blob null-termination change.
+- Kept Wrynose Curl_safefree() helper usage and local result-variable
+ style while preserving the upstream mTLS credential matching and
+ session-cache key behavior.
+- Wrynose curl 8.19.0 does not have upstream Curl_peer. The
+ Curl_ssl_peer_key_build() helper keeps Wrynose connectdata and
+ conn_to_host/conn_to_port keying while adding the mTLS key fields.
+- Kept Wrynose test registry ordering and added only the new upstream
+ test3303/test3304 and unit3303/unit3304 regression test entries.
+
+[1] https://github.com/curl/curl/commit/67bf021e97bbebadade7e40217a4967042ac6a07
+
+(cherry picked from commit 7541ae569d82fb308a5e2d94916027da4fa3ba3e)
+Signed-off-by: Deepak Rathore <deeratho@cisco.com>
+---
+ lib/ldap.c | 4 +-
+ lib/urldata.h | 10 +--
+ lib/vssh/libssh.c | 6 +-
+ lib/vssh/libssh2.c | 2 +-
+ lib/vtls/gtls.c | 14 ++--
+ lib/vtls/mbedtls.c | 24 +++---
+ lib/vtls/openssl.c | 7 +-
+ lib/vtls/rustls.c | 13 ++--
+ lib/vtls/schannel.c | 10 +--
+ lib/vtls/vtls.c | 37 ++++++---
+ lib/vtls/vtls_scache.c | 105 +++++++++++++++++++++-----
+ lib/vtls/vtls_scache.h | 16 ++++
+ lib/vtls/wolfssl.c | 14 ++--
+ tests/data/Makefile.am | 3 +
+ tests/data/test3303 | 20 +++++
+ tests/data/test3304 | 20 +++++
+ tests/unit/Makefile.inc | 3 +-
+ tests/unit/unit3303.c | 127 +++++++++++++++++++++++++++++++
+ tests/unit/unit3304.c | 163 ++++++++++++++++++++++++++++++++++++++++
+ 19 files changed, 517 insertions(+), 81 deletions(-)
+ create mode 100644 tests/data/test3303
+ create mode 100644 tests/data/test3304
+ create mode 100644 tests/unit/unit3303.c
+ create mode 100644 tests/unit/unit3304.c
+
+diff --git a/lib/ldap.c b/lib/ldap.c
+index e223078b03..5bf76572c8 100644
+--- a/lib/ldap.c
++++ b/lib/ldap.c
+@@ -329,8 +329,8 @@ static CURLcode ldap_do(struct Curl_easy *data, bool *done)
+ #ifdef LDAP_OPT_X_TLS
+ if(conn->ssl_config.verifypeer) {
+ /* OpenLDAP SDK supports BASE64 files. */
+- if(data->set.ssl.cert_type &&
+- !curl_strequal(data->set.ssl.cert_type, "PEM")) {
++ if(data->set.ssl.primary.cert_type &&
++ !curl_strequal(data->set.ssl.primary.cert_type, "PEM")) {
+ failf(data, "LDAP local: ERROR OpenLDAP only supports PEM cert-type");
+ result = CURLE_SSL_CERTPROBLEM;
+ goto quit;
+diff --git a/lib/urldata.h b/lib/urldata.h
+index 65005c4b34..dce181d99d 100644
+--- a/lib/urldata.h
++++ b/lib/urldata.h
+@@ -230,9 +230,14 @@ struct ssl_primary_config {
+ char *signature_algorithms; /* list of signature algorithms to use */
+ char *pinned_key;
+ char *CRLfile; /* CRL to check certificate revocation */
++ char *cert_type; /* format for certificate (default: PEM) */
++ char *key; /* private key filename */
++ char *key_type; /* format for private key (default: PEM) */
++ char *key_passwd; /* plain text private key password */
+ struct curl_blob *cert_blob;
+ struct curl_blob *ca_info_blob;
+ struct curl_blob *issuercert_blob;
++ struct curl_blob *key_blob;
+ #ifdef USE_TLS_SRP
+ char *username; /* TLS username (for, e.g., SRP) */
+ char *password; /* TLS password (for, e.g., SRP) */
+@@ -252,11 +257,6 @@ struct ssl_config_data {
+ long certverifyresult; /* result from the certificate verification */
+ curl_ssl_ctx_callback fsslctx; /* function to initialize ssl ctx */
+ void *fsslctxp; /* parameter for call back */
+- char *cert_type; /* format for certificate (default: PEM) */
+- char *key; /* private key filename */
+- struct curl_blob *key_blob;
+- char *key_type; /* format for private key (default: PEM) */
+- char *key_passwd; /* plain text private key password */
+ BIT(certinfo); /* gather lots of certificate info */
+ BIT(earlydata); /* use TLS 1.3 early data */
+ BIT(enable_beast); /* allow this flaw for interoperability's sake */
+diff --git a/lib/vssh/libssh.c b/lib/vssh/libssh.c
+index 3a2a52e1f8..db767f7d00 100644
+--- a/lib/vssh/libssh.c
++++ b/lib/vssh/libssh.c
+@@ -791,7 +791,7 @@ static int myssh_in_AUTH_PKEY_INIT(struct Curl_easy *data,
+ /* Two choices, (1) private key was given on CMD,
+ * (2) use the "default" keys. */
+ if(data->set.str[STRING_SSH_PRIVATE_KEY]) {
+- if(sshc->pubkey && !data->set.ssl.key_passwd) {
++ if(sshc->pubkey && !data->set.ssl.primary.key_passwd) {
+ rc = ssh_userauth_try_publickey(sshc->ssh_session, NULL, sshc->pubkey);
+ if(rc == SSH_AUTH_AGAIN)
+ return SSH_AGAIN;
+@@ -804,7 +804,7 @@ static int myssh_in_AUTH_PKEY_INIT(struct Curl_easy *data,
+
+ rc = ssh_pki_import_privkey_file(data->
+ set.str[STRING_SSH_PRIVATE_KEY],
+- data->set.ssl.key_passwd, NULL,
++ data->set.ssl.primary.key_passwd, NULL,
+ NULL, &sshc->privkey);
+ if(rc != SSH_OK) {
+ failf(data, "Could not load private key file %s",
+@@ -817,7 +817,7 @@ static int myssh_in_AUTH_PKEY_INIT(struct Curl_easy *data,
+ }
+ else {
+ rc = ssh_userauth_publickey_auto(sshc->ssh_session, NULL,
+- data->set.ssl.key_passwd);
++ data->set.ssl.primary.key_passwd);
+ if(rc == SSH_AUTH_AGAIN)
+ return SSH_AGAIN;
+
+diff --git a/lib/vssh/libssh2.c b/lib/vssh/libssh2.c
+index 63f5735b83..3c25fe7448 100644
+--- a/lib/vssh/libssh2.c
++++ b/lib/vssh/libssh2.c
+@@ -1144,7 +1144,7 @@ static CURLcode ssh_state_pkey_init(struct Curl_easy *data,
+ return CURLE_OUT_OF_MEMORY;
+ }
+
+- sshc->passphrase = data->set.ssl.key_passwd;
++ sshc->passphrase = data->set.ssl.primary.key_passwd;
+ if(!sshc->passphrase)
+ sshc->passphrase = "";
+
+diff --git a/lib/vtls/gtls.c b/lib/vtls/gtls.c
+index a0a465c360..bfeb948542 100644
+--- a/lib/vtls/gtls.c
++++ b/lib/vtls/gtls.c
+@@ -988,10 +988,11 @@ static CURLcode gtls_client_init(struct Curl_cfilter *cf,
+ if(result)
+ return result;
+ }
+- if(ssl_config->cert_type && curl_strequal(ssl_config->cert_type, "P12")) {
++ if(ssl_config->primary.cert_type &&
++ curl_strequal(ssl_config->primary.cert_type, "P12")) {
+ rc = gnutls_certificate_set_x509_simple_pkcs12_file(
+ gtls->shared_creds->creds, config->clientcert, GNUTLS_X509_FMT_DER,
+- ssl_config->key_passwd ? ssl_config->key_passwd : "");
++ ssl_config->primary.key_passwd ? ssl_config->primary.key_passwd : "");
+ if(rc != GNUTLS_E_SUCCESS) {
+ failf(data,
+ "error reading X.509 potentially-encrypted key or certificate "
+@@ -1009,14 +1010,15 @@ static CURLcode gtls_client_init(struct Curl_cfilter *cf,
+ rc = gnutls_certificate_set_x509_key_file2(
+ gtls->shared_creds->creds,
+ config->clientcert,
+- ssl_config->key ? ssl_config->key : config->clientcert,
+- gnutls_do_file_type(ssl_config->cert_type),
+- ssl_config->key_passwd,
++ ssl_config->primary.key ? ssl_config->primary.key :
++ config->clientcert,
++ gnutls_do_file_type(ssl_config->primary.cert_type),
++ ssl_config->primary.key_passwd,
+ supported_key_encryption_algorithms);
+ if(rc != GNUTLS_E_SUCCESS) {
+ failf(data,
+ "error reading X.509 %skey file: %s",
+- ssl_config->key_passwd ? "potentially-encrypted " : "",
++ ssl_config->primary.key_passwd ? "potentially-encrypted " : "",
+ gnutls_strerror(rc));
+ return CURLE_SSL_CONNECT_ERROR;
+ }
+diff --git a/lib/vtls/mbedtls.c b/lib/vtls/mbedtls.c
+index 54f0ac9fd4..d2199df884 100644
+--- a/lib/vtls/mbedtls.c
++++ b/lib/vtls/mbedtls.c
+@@ -484,7 +484,7 @@ static CURLcode mbed_load_cacert(struct Curl_cfilter *cf,
+ const char * const ssl_capath = conn_config->CApath;
+ #ifdef MBEDTLS_PEM_PARSE_C
+ struct ssl_config_data *ssl_config = Curl_ssl_cf_get_config(cf, data);
+- const char * const ssl_cert_type = ssl_config->cert_type;
++ const char * const ssl_cert_type = ssl_config->primary.cert_type;
+ #endif
+ int ret = -1;
+ char errorbuf[128];
+@@ -579,7 +579,7 @@ static CURLcode mbed_load_clicert(struct Curl_cfilter *cf,
+ char * const ssl_cert = ssl_config->primary.clientcert;
+ const struct curl_blob *ssl_cert_blob = ssl_config->primary.cert_blob;
+ #ifdef MBEDTLS_PEM_PARSE_C
+- const char * const ssl_cert_type = ssl_config->cert_type;
++ const char * const ssl_cert_type = ssl_config->primary.cert_type;
+ #endif
+ int ret = -1;
+ char errorbuf[128];
+@@ -660,12 +660,12 @@ static CURLcode mbed_load_privkey(struct Curl_cfilter *cf,
+
+ mbedtls_pk_init(&backend->pk);
+
+- if(ssl_config->key || ssl_config->key_blob) {
+- if(ssl_config->key) {
++ if(ssl_config->primary.key || ssl_config->primary.key_blob) {
++ if(ssl_config->primary.key) {
+ #ifdef MBEDTLS_FS_IO
+ #if MBEDTLS_VERSION_NUMBER >= 0x04000000
+- ret = mbedtls_pk_parse_keyfile(&backend->pk, ssl_config->key,
+- ssl_config->key_passwd);
++ ret = mbedtls_pk_parse_keyfile(&backend->pk, ssl_config->primary.key,
++ ssl_config->primary.key_passwd);
+ if(ret == 0 &&
+ !(mbedtls_pk_can_do_psa(&backend->pk,
+ PSA_ALG_RSA_PKCS1V15_SIGN(PSA_ALG_ANY_HASH),
+@@ -675,8 +675,8 @@ static CURLcode mbed_load_privkey(struct Curl_cfilter *cf,
+ PSA_KEY_USAGE_SIGN_HASH)))
+ ret = MBEDTLS_ERR_PK_TYPE_MISMATCH;
+ #else
+- ret = mbedtls_pk_parse_keyfile(&backend->pk, ssl_config->key,
+- ssl_config->key_passwd,
++ ret = mbedtls_pk_parse_keyfile(&backend->pk, ssl_config->primary.key,
++ ssl_config->primary.key_passwd,
+ mbedtls_ctr_drbg_random,
+ &rng.drbg);
+ if(ret == 0 && !(mbedtls_pk_can_do(&backend->pk, MBEDTLS_PK_RSA) ||
+@@ -687,7 +687,7 @@ static CURLcode mbed_load_privkey(struct Curl_cfilter *cf,
+ if(ret) {
+ mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
+ failf(data, "mbedTLS: error reading private key %s: (-0x%04X) %s",
+- ssl_config->key, -ret, errorbuf);
++ ssl_config->primary.key, -ret, errorbuf);
+ return CURLE_SSL_CERTPROBLEM;
+ }
+ #else
+@@ -696,8 +696,8 @@ static CURLcode mbed_load_privkey(struct Curl_cfilter *cf,
+ #endif
+ }
+ else {
+- const struct curl_blob *ssl_key_blob = ssl_config->key_blob;
+- const char *passwd = ssl_config->key_passwd;
++ const struct curl_blob *ssl_key_blob = ssl_config->primary.key_blob;
++ const char *passwd = ssl_config->primary.key_passwd;
+ /* Unfortunately, mbedtls_pk_parse_key() requires the data to be
+ null-terminated if the data is PEM encoded (even when provided the
+ exact length). */
+@@ -931,7 +931,7 @@ static CURLcode mbed_configure_ssl(struct Curl_cfilter *cf,
+ #endif
+ );
+
+- if(ssl_config->key || ssl_config->key_blob) {
++ if(ssl_config->primary.key || ssl_config->primary.key_blob) {
+ mbedtls_ssl_conf_own_cert(&backend->config, &backend->clicert,
+ &backend->pk);
+ }
+diff --git a/lib/vtls/openssl.c b/lib/vtls/openssl.c
+index 50bf1e0476..9cbab14b41 100644
+--- a/lib/vtls/openssl.c
++++ b/lib/vtls/openssl.c
+@@ -3724,7 +3724,7 @@ CURLcode Curl_ossl_ctx_init(struct ossl_ctx *octx,
+ struct ssl_config_data *ssl_config = Curl_ssl_cf_get_config(cf, data);
+ char * const ssl_cert = ssl_config->primary.clientcert;
+ const struct curl_blob *ssl_cert_blob = ssl_config->primary.cert_blob;
+- const char * const ssl_cert_type = ssl_config->cert_type;
++ const char * const ssl_cert_type = ssl_config->primary.cert_type;
+ unsigned int ssl_version_min;
+ char error_buffer[256];
+
+@@ -3888,8 +3888,9 @@ CURLcode Curl_ossl_ctx_init(struct ossl_ctx *octx,
+ if(ssl_cert || ssl_cert_blob || ssl_cert_type) {
+ result = client_cert(data, octx->ssl_ctx,
+ ssl_cert, ssl_cert_blob, ssl_cert_type,
+- ssl_config->key, ssl_config->key_blob,
+- ssl_config->key_type, ssl_config->key_passwd);
++ ssl_config->primary.key, ssl_config->primary.key_blob,
++ ssl_config->primary.key_type,
++ ssl_config->primary.key_passwd);
+ if(result)
+ /* failf() is already done in client_cert() */
+ return result;
+diff --git a/lib/vtls/rustls.c b/lib/vtls/rustls.c
+index 061b444bce..564b10aa47 100644
+--- a/lib/vtls/rustls.c
++++ b/lib/vtls/rustls.c
+@@ -841,14 +841,14 @@ init_config_builder_client_auth(struct Curl_easy *data,
+ const struct rustls_certified_key *certified_key = NULL;
+ CURLcode result = CURLE_OK;
+
+- if(conn_config->clientcert && !ssl_config->key) {
++ if(conn_config->clientcert && !ssl_config->primary.key) {
+ failf(data, "rustls: must provide key with certificate '%s'",
+ conn_config->clientcert);
+ return CURLE_SSL_CERTPROBLEM;
+ }
+- else if(!conn_config->clientcert && ssl_config->key) {
++ else if(!conn_config->clientcert && ssl_config->primary.key) {
+ failf(data, "rustls: must provide certificate with key '%s'",
+- ssl_config->key);
++ ssl_config->primary.key);
+ return CURLE_SSL_CERTPROBLEM;
+ }
+
+@@ -862,8 +862,9 @@ init_config_builder_client_auth(struct Curl_easy *data,
+ goto cleanup;
+ }
+
+- if(!read_file_into(ssl_config->key, &key_contents)) {
+- failf(data, "rustls: failed to read key file: '%s'", ssl_config->key);
++ if(!read_file_into(ssl_config->primary.key, &key_contents)) {
++ failf(data, "rustls: failed to read key file: '%s'",
++ ssl_config->primary.key);
+ result = CURLE_SSL_CERTPROBLEM;
+ goto cleanup;
+ }
+@@ -1053,7 +1054,7 @@ static CURLcode cr_init_backend(struct Curl_cfilter *cf,
+ }
+ }
+
+- if(conn_config->clientcert || ssl_config->key) {
++ if(conn_config->clientcert || ssl_config->primary.key) {
+ result = init_config_builder_client_auth(data,
+ conn_config,
+ ssl_config,
+diff --git a/lib/vtls/schannel.c b/lib/vtls/schannel.c
+index 650a0e38ca..a4f57c7c0a 100644
+--- a/lib/vtls/schannel.c
++++ b/lib/vtls/schannel.c
+@@ -414,8 +414,8 @@ static CURLcode get_client_cert(struct Curl_easy *data,
+ }
+ }
+
+- if((fInCert || blob) && data->set.ssl.cert_type &&
+- !curl_strequal(data->set.ssl.cert_type, "P12")) {
++ if((fInCert || blob) && data->set.ssl.primary.cert_type &&
++ !curl_strequal(data->set.ssl.primary.cert_type, "P12")) {
+ failf(data, "schannel: certificate format compatibility error "
+ "for %s",
+ blob ? "(memory blob)" : data->set.ssl.primary.clientcert);
+@@ -465,15 +465,15 @@ static CURLcode get_client_cert(struct Curl_easy *data,
+ datablob.pbData = (BYTE *)certdata;
+ datablob.cbData = (DWORD)certsize;
+
+- if(data->set.ssl.key_passwd)
+- pwd_len = strlen(data->set.ssl.key_passwd);
++ if(data->set.ssl.primary.key_passwd)
++ pwd_len = strlen(data->set.ssl.primary.key_passwd);
+ pszPassword = (WCHAR *)curlx_malloc(sizeof(WCHAR) * (pwd_len + 1));
+ if(pszPassword) {
+ int str_w_len = 0;
+ if(pwd_len > 0)
+ str_w_len = MultiByteToWideChar(CP_UTF8,
+ MB_ERR_INVALID_CHARS,
+- data->set.ssl.key_passwd,
++ data->set.ssl.primary.key_passwd,
+ (int)pwd_len,
+ pszPassword, (int)(pwd_len + 1));
+
+diff --git a/lib/vtls/vtls.c b/lib/vtls/vtls.c
+index f7201d18d6..6dcc67dccd 100644
+--- a/lib/vtls/vtls.c
++++ b/lib/vtls/vtls.c
+@@ -204,6 +204,7 @@ static bool match_ssl_primary_config(struct Curl_easy *data,
+ blobcmp(c1->cert_blob, c2->cert_blob) &&
+ blobcmp(c1->ca_info_blob, c2->ca_info_blob) &&
+ blobcmp(c1->issuercert_blob, c2->issuercert_blob) &&
++ blobcmp(c1->key_blob, c2->key_blob) &&
+ Curl_safecmp(c1->CApath, c2->CApath) &&
+ Curl_safecmp(c1->CAfile, c2->CAfile) &&
+ Curl_safecmp(c1->issuercert, c2->issuercert) &&
+@@ -217,7 +218,11 @@ static bool match_ssl_primary_config(struct Curl_easy *data,
+ curl_strequal(c1->curves, c2->curves) &&
+ curl_strequal(c1->signature_algorithms, c2->signature_algorithms) &&
+ curl_strequal(c1->CRLfile, c2->CRLfile) &&
+- curl_strequal(c1->pinned_key, c2->pinned_key))
++ curl_strequal(c1->pinned_key, c2->pinned_key) &&
++ curl_strequal(c1->cert_type, c2->cert_type) &&
++ Curl_safecmp(c1->key, c2->key) &&
++ curl_strequal(c1->key_type, c2->key_type) &&
++ !Curl_timestrcmp(c1->key_passwd, c2->key_passwd))
+ return TRUE;
+
+ return FALSE;
+@@ -252,6 +257,7 @@ static bool clone_ssl_primary_config(struct ssl_primary_config *source,
+ CLONE_BLOB(cert_blob);
+ CLONE_BLOB(ca_info_blob);
+ CLONE_BLOB(issuercert_blob);
++ CLONE_BLOB(key_blob);
+ CLONE_STRING(CApath);
+ CLONE_STRING(CAfile);
+ CLONE_STRING(issuercert);
+@@ -262,6 +268,10 @@ static bool clone_ssl_primary_config(struct ssl_primary_config *source,
+ CLONE_STRING(curves);
+ CLONE_STRING(signature_algorithms);
+ CLONE_STRING(CRLfile);
++ CLONE_STRING(cert_type);
++ CLONE_STRING(key);
++ CLONE_STRING(key_type);
++ CLONE_STRING(key_passwd);
+ #ifdef USE_TLS_SRP
+ CLONE_STRING(username);
+ CLONE_STRING(password);
+@@ -282,9 +292,14 @@ static void free_primary_ssl_config(struct ssl_primary_config *sslc)
+ Curl_safefree(sslc->cert_blob);
+ Curl_safefree(sslc->ca_info_blob);
+ Curl_safefree(sslc->issuercert_blob);
++ Curl_safefree(sslc->key_blob);
+ Curl_safefree(sslc->curves);
+ Curl_safefree(sslc->signature_algorithms);
+ Curl_safefree(sslc->CRLfile);
++ Curl_safefree(sslc->cert_type);
++ Curl_safefree(sslc->key);
++ Curl_safefree(sslc->key_type);
++ Curl_safefree(sslc->key_passwd);
+ #ifdef USE_TLS_SRP
+ Curl_safefree(sslc->username);
+ Curl_safefree(sslc->password);
+@@ -336,12 +351,12 @@ CURLcode Curl_ssl_easy_config_complete(struct Curl_easy *data)
+ sslc->primary.username = data->set.str[STRING_TLSAUTH_USERNAME];
+ sslc->primary.password = data->set.str[STRING_TLSAUTH_PASSWORD];
+ #endif
+- sslc->cert_type = data->set.str[STRING_CERT_TYPE];
+- sslc->key = data->set.str[STRING_KEY];
+- sslc->key_type = data->set.str[STRING_KEY_TYPE];
+- sslc->key_passwd = data->set.str[STRING_KEY_PASSWD];
++ sslc->primary.cert_type = data->set.str[STRING_CERT_TYPE];
++ sslc->primary.key = data->set.str[STRING_KEY];
++ sslc->primary.key_type = data->set.str[STRING_KEY_TYPE];
++ sslc->primary.key_passwd = data->set.str[STRING_KEY_PASSWD];
+ sslc->primary.clientcert = data->set.str[STRING_CERT];
+- sslc->key_blob = data->set.blobs[BLOB_KEY];
++ sslc->primary.key_blob = data->set.blobs[BLOB_KEY];
+
+ #ifndef CURL_DISABLE_PROXY
+ sslc = &data->set.proxy_ssl;
+@@ -377,12 +392,12 @@ CURLcode Curl_ssl_easy_config_complete(struct Curl_easy *data)
+ sslc->primary.issuercert = data->set.str[STRING_SSL_ISSUERCERT_PROXY];
+ sslc->primary.issuercert_blob = data->set.blobs[BLOB_SSL_ISSUERCERT_PROXY];
+ sslc->primary.CRLfile = data->set.str[STRING_SSL_CRLFILE_PROXY];
+- sslc->cert_type = data->set.str[STRING_CERT_TYPE_PROXY];
+- sslc->key = data->set.str[STRING_KEY_PROXY];
+- sslc->key_type = data->set.str[STRING_KEY_TYPE_PROXY];
+- sslc->key_passwd = data->set.str[STRING_KEY_PASSWD_PROXY];
++ sslc->primary.cert_type = data->set.str[STRING_CERT_TYPE_PROXY];
++ sslc->primary.key = data->set.str[STRING_KEY_PROXY];
++ sslc->primary.key_type = data->set.str[STRING_KEY_TYPE_PROXY];
++ sslc->primary.key_passwd = data->set.str[STRING_KEY_PASSWD_PROXY];
+ sslc->primary.clientcert = data->set.str[STRING_CERT_PROXY];
+- sslc->key_blob = data->set.blobs[BLOB_KEY_PROXY];
++ sslc->primary.key_blob = data->set.blobs[BLOB_KEY_PROXY];
+ #ifdef USE_TLS_SRP
+ sslc->primary.username = data->set.str[STRING_TLSAUTH_USERNAME_PROXY];
+ sslc->primary.password = data->set.str[STRING_TLSAUTH_PASSWORD_PROXY];
+diff --git a/lib/vtls/vtls_scache.c b/lib/vtls/vtls_scache.c
+index 673abcfe0d..75e5b89553 100644
+--- a/lib/vtls/vtls_scache.c
++++ b/lib/vtls/vtls_scache.c
+@@ -50,6 +50,7 @@
+ struct Curl_ssl_scache_peer {
+ char *ssl_peer_key; /* id for peer + relevant TLS configuration */
+ char *clientcert;
++ char *key_passwd;
+ char *srp_username;
+ char *srp_password;
+ struct Curl_llist sessions;
+@@ -123,6 +124,48 @@ out:
+ return r;
+ }
+
++static CURLcode cf_ssl_peer_key_add_mtls(struct dynbuf *buf,
++ struct ssl_primary_config *ssl,
++ bool *is_local)
++{
++ CURLcode result = CURLE_OK;
++ if(ssl->clientcert && ssl->clientcert[0]) {
++ result = cf_ssl_peer_key_add_path(buf, "CCERT", ssl->clientcert, is_local);
++ if(result)
++ goto out;
++ }
++ if(ssl->key && ssl->key[0]) {
++ result = cf_ssl_peer_key_add_path(buf, "KEY", ssl->key, is_local);
++ if(result)
++ goto out;
++ }
++ if(ssl->key_blob) {
++ result = cf_ssl_peer_key_add_hash(buf, "KEYBlob", ssl->key_blob);
++ if(result)
++ goto out;
++ }
++ if(ssl->cert_type && ssl->cert_type[0]) {
++ size_t i;
++ result = curlx_dyn_add(buf, ":CT-");
++ for(i = 0; !result && ssl->cert_type[i]; i++) {
++ char c = Curl_raw_toupper(ssl->cert_type[i]);
++ result = curlx_dyn_addn(buf, &c, 1);
++ }
++ if(result)
++ goto out;
++ }
++ if(ssl->key_type && ssl->key_type[0]) {
++ size_t i;
++ result = curlx_dyn_add(buf, ":KT-");
++ for(i = 0; !result && ssl->key_type[i]; i++) {
++ char c = Curl_raw_toupper(ssl->key_type[i]);
++ result = curlx_dyn_addn(buf, &c, 1);
++ }
++ }
++out:
++ return result;
++}
++
+ #define CURL_SSLS_LOCAL_SUFFIX ":L"
+ #define CURL_SSLS_GLOBAL_SUFFIX ":G"
+
+@@ -134,12 +177,12 @@ static bool cf_ssl_peer_key_is_global(const char *peer_key)
+ (peer_key[len - 2] == ':');
+ }
+
+-CURLcode Curl_ssl_peer_key_make(struct Curl_cfilter *cf,
+- const struct ssl_peer *peer,
+- const char *tls_id,
+- char **ppeer_key)
++CURLcode Curl_ssl_peer_key_build(struct ssl_primary_config *ssl,
++ const struct ssl_peer *peer,
++ const struct connectdata *conn,
++ const char *tls_id,
++ char **ppeer_key)
+ {
+- struct ssl_primary_config *ssl = Curl_ssl_cf_get_primary_config(cf);
+ struct dynbuf buf;
+ size_t key_len;
+ bool is_local = FALSE;
+@@ -187,13 +230,13 @@ CURLcode Curl_ssl_peer_key_make(struct Curl_cfilter *cf,
+ goto out;
+ }
+ if(!ssl->verifypeer || !ssl->verifyhost) {
+- if(cf->conn->bits.conn_to_host) {
+- r = curlx_dyn_addf(&buf, ":CHOST-%s", cf->conn->conn_to_host.name);
++ if(conn && conn->bits.conn_to_host) {
++ r = curlx_dyn_addf(&buf, ":CHOST-%s", conn->conn_to_host.name);
+ if(r)
+ goto out;
+ }
+- if(cf->conn->bits.conn_to_port) {
+- r = curlx_dyn_addf(&buf, ":CPORT-%d", cf->conn->conn_to_port);
++ if(conn && conn->bits.conn_to_port) {
++ r = curlx_dyn_addf(&buf, ":CPORT-%d", conn->conn_to_port);
+ if(r)
+ goto out;
+ }
+@@ -260,11 +303,9 @@ CURLcode Curl_ssl_peer_key_make(struct Curl_cfilter *cf,
+ goto out;
+ }
+
+- if(ssl->clientcert && ssl->clientcert[0]) {
+- r = curlx_dyn_add(&buf, ":CCERT");
+- if(r)
+- goto out;
+- }
++ r = cf_ssl_peer_key_add_mtls(&buf, ssl, &is_local);
++ if(r)
++ goto out;
+ #ifdef USE_TLS_SRP
+ if(ssl->username || ssl->password) {
+ r = curlx_dyn_add(&buf, ":SRP-AUTH");
+@@ -295,6 +336,15 @@ out:
+ return r;
+ }
+
++CURLcode Curl_ssl_peer_key_make(struct Curl_cfilter *cf,
++ const struct ssl_peer *peer,
++ const char *tls_id,
++ char **ppeer_key)
++{
++ struct ssl_primary_config *ssl = Curl_ssl_cf_get_primary_config(cf);
++ return Curl_ssl_peer_key_build(ssl, peer, cf->conn, tls_id, ppeer_key);
++}
++
+ struct Curl_ssl_scache {
+ unsigned int magic;
+ struct Curl_ssl_scache_peer *peers;
+@@ -402,6 +452,7 @@ static void cf_ssl_scache_clear_peer(struct Curl_ssl_scache_peer *peer)
+ }
+ peer->sobj_free = NULL;
+ Curl_safefree(peer->clientcert);
++ Curl_safefree(peer->key_passwd);
+ #ifdef USE_TLS_SRP
+ Curl_safefree(peer->srp_username);
+ Curl_safefree(peer->srp_password);
+@@ -430,8 +481,8 @@ static void cf_ssl_cache_peer_update(struct Curl_ssl_scache_peer *peer)
+ * - its peer key is not yet known, because sessions were
+ * imported using only the salt+hmac
+ * - the peer key is global, e.g. carrying no relative paths */
+- peer->exportable = (!peer->clientcert && !peer->srp_username &&
+- !peer->srp_password &&
++ peer->exportable = (!peer->clientcert && !peer->key_passwd &&
++ !peer->srp_username && !peer->srp_password &&
+ (!peer->ssl_peer_key ||
+ cf_ssl_peer_key_is_global(peer->ssl_peer_key)));
+ }
+@@ -440,6 +491,7 @@ static CURLcode
+ cf_ssl_scache_peer_init(struct Curl_ssl_scache_peer *peer,
+ const char *ssl_peer_key,
+ const char *clientcert,
++ const char *key_passwd,
+ const char *srp_username,
+ const char *srp_password,
+ const unsigned char *salt,
+@@ -468,6 +520,11 @@ cf_ssl_scache_peer_init(struct Curl_ssl_scache_peer *peer,
+ if(!peer->clientcert)
+ goto out;
+ }
++ if(key_passwd) {
++ peer->key_passwd = curlx_strdup(key_passwd);
++ if(!peer->key_passwd)
++ goto out;
++ }
+ if(srp_username) {
+ peer->srp_username = curlx_strdup(srp_username);
+ if(!peer->srp_username)
+@@ -598,7 +655,7 @@ static bool cf_ssl_scache_match_auth(struct Curl_ssl_scache_peer *peer,
+ struct ssl_primary_config *conn_config)
+ {
+ if(!conn_config) {
+- if(peer->clientcert)
++ if(peer->clientcert || peer->key_passwd)
+ return FALSE;
+ #ifdef USE_TLS_SRP
+ if(peer->srp_username || peer->srp_password)
+@@ -608,6 +665,8 @@ static bool cf_ssl_scache_match_auth(struct Curl_ssl_scache_peer *peer,
+ }
+ else if(!Curl_safecmp(peer->clientcert, conn_config->clientcert))
+ return FALSE;
++ if(Curl_timestrcmp(peer->key_passwd, conn_config->key_passwd))
++ return FALSE;
+ #ifdef USE_TLS_SRP
+ if(Curl_timestrcmp(peer->srp_username, conn_config->username) ||
+ Curl_timestrcmp(peer->srp_password, conn_config->password))
+@@ -734,13 +793,21 @@ static CURLcode cf_ssl_add_peer(struct Curl_easy *data,
+
+ peer = cf_ssl_get_free_peer(scache);
+ if(peer) {
++ char buffer[64];
+ const char *ccert = conn_config ? conn_config->clientcert : NULL;
++ const char *kpasswd = conn_config ? conn_config->key_passwd : NULL;
+ const char *username = NULL, *password = NULL;
+ #ifdef USE_TLS_SRP
+ username = conn_config ? conn_config->username : NULL;
+ password = conn_config ? conn_config->password : NULL;
+ #endif
+- result = cf_ssl_scache_peer_init(peer, ssl_peer_key, ccert,
++ if(!ccert && conn_config && conn_config->cert_blob) {
++ /* when using a client cert blob, create a name for it */
++ curl_msnprintf(buffer, sizeof(buffer),
++ "cert-%p", conn_config->cert_blob->data);
++ ccert = buffer; /* data is strduped by cf_ssl_scache_peer_init */
++ }
++ result = cf_ssl_scache_peer_init(peer, ssl_peer_key, ccert, kpasswd,
+ username, password, NULL, NULL);
+ if(result)
+ goto out;
+@@ -1115,7 +1182,7 @@ CURLcode Curl_ssl_session_import(struct Curl_easy *data,
+ if(!peer) {
+ peer = cf_ssl_get_free_peer(scache);
+ if(peer) {
+- r = cf_ssl_scache_peer_init(peer, ssl_peer_key, NULL,
++ r = cf_ssl_scache_peer_init(peer, ssl_peer_key, NULL, NULL,
+ NULL, NULL, salt, hmac);
+ if(r)
+ goto out;
+diff --git a/lib/vtls/vtls_scache.h b/lib/vtls/vtls_scache.h
+index b9db0f19b3..d33f2bb1a7 100644
+--- a/lib/vtls/vtls_scache.h
++++ b/lib/vtls/vtls_scache.h
+@@ -66,6 +66,22 @@ CURLcode Curl_ssl_peer_key_make(struct Curl_cfilter *cf,
+ const char *tls_id,
+ char **ppeer_key);
+
++/**
++ * Like Curl_ssl_peer_key_make() but takes the primary config and peer
++ * descriptors directly, without requiring a Curl_cfilter. Exposed for
++ * unit testing.
++ * @param ssl the primary SSL config to key on
++ * @param peer the peer the filter wants to talk to
++ * @param conn connection data for connect-to keying, or NULL
++ * @param tls_id identifier of TLS implementation for sessions
++ * @param ppeer_key on successful return, the key generated
++ */
++CURLcode Curl_ssl_peer_key_build(struct ssl_primary_config *ssl,
++ const struct ssl_peer *peer,
++ const struct connectdata *conn,
++ const char *tls_id,
++ char **ppeer_key);
++
+ /* Return if there is a session cache shall be used.
+ * An ssl session might not be configured or not available for
+ * "connect-only" transfers.
+diff --git a/lib/vtls/wolfssl.c b/lib/vtls/wolfssl.c
+index aa841a754a..74bd247e68 100644
+--- a/lib/vtls/wolfssl.c
++++ b/lib/vtls/wolfssl.c
+@@ -919,10 +919,10 @@ static CURLcode client_certificate(struct Curl_easy *data,
+ #ifndef NO_FILESYSTEM
+ if(ssl_config->primary.cert_blob || ssl_config->primary.clientcert) {
+ const char *cert_file = ssl_config->primary.clientcert;
+- const char *key_file = ssl_config->key;
++ const char *key_file = ssl_config->primary.key;
+ const struct curl_blob *cert_blob = ssl_config->primary.cert_blob;
+- const struct curl_blob *key_blob = ssl_config->key_blob;
+- int file_type = wssl_do_file_type(ssl_config->cert_type);
++ const struct curl_blob *key_blob = ssl_config->primary.key_blob;
++ int file_type = wssl_do_file_type(ssl_config->primary.cert_type);
+ int rc;
+
+ switch(file_type) {
+@@ -953,7 +953,7 @@ static CURLcode client_certificate(struct Curl_easy *data,
+ key_file = cert_file;
+ }
+ else
+- file_type = wssl_do_file_type(ssl_config->key_type);
++ file_type = wssl_do_file_type(ssl_config->primary.key_type);
+
+ rc = key_blob ?
+ wolfSSL_CTX_use_PrivateKey_buffer(wctx->ssl_ctx, key_blob->data,
+@@ -967,8 +967,8 @@ static CURLcode client_certificate(struct Curl_easy *data,
+ #else /* NO_FILESYSTEM */
+ if(ssl_config->primary.cert_blob) {
+ const struct curl_blob *cert_blob = ssl_config->primary.cert_blob;
+- const struct curl_blob *key_blob = ssl_config->key_blob;
+- int file_type = wssl_do_file_type(ssl_config->cert_type);
++ const struct curl_blob *key_blob = ssl_config->primary.key_blob;
++ int file_type = wssl_do_file_type(ssl_config->primary.cert_type);
+ int rc;
+
+ switch(file_type) {
+@@ -993,7 +993,7 @@ static CURLcode client_certificate(struct Curl_easy *data,
+ if(!key_blob)
+ key_blob = cert_blob;
+ else
+- file_type = wssl_do_file_type(ssl_config->key_type);
++ file_type = wssl_do_file_type(ssl_config->primary.key_type);
+
+ if(wolfSSL_CTX_use_PrivateKey_buffer(wctx->ssl_ctx, key_blob->data,
+ (long)key_blob->len,
+diff --git a/tests/data/Makefile.am b/tests/data/Makefile.am
+index 4fd7dfe912..2217666382 100644
+--- a/tests/data/Makefile.am
++++ b/tests/data/Makefile.am
+@@ -282,6 +282,9 @@ test3100 test3101 test3102 test3103 test3104 test3105 \
+ \
+ test3200 test3201 test3202 test3203 test3204 test3205 test3206 test3207 test3208 \
+ test3209 test3210 test3211 test3212 test3213 test3214 test3215 test3216 \
++\
++test3303 test3304 \
++\
+ test4000 test4001
+
+ EXTRA_DIST = $(TESTCASES) DISABLED data-xml1 data320.html \
+diff --git a/tests/data/test3303 b/tests/data/test3303
+new file mode 100644
+index 0000000000..697049f013
+--- /dev/null
++++ b/tests/data/test3303
+@@ -0,0 +1,20 @@
++<?xml version="1.0" encoding="US-ASCII"?>
++<testcase>
++<info>
++<keywords>
++unittest
++TLS
++mTLS
++</keywords>
++</info>
++
++# Client-side
++<client>
++<features>
++unittest
++</features>
++<name>
++conn-reuse match distinguishes mTLS key, cert_type, key_type and key_passwd fields
++</name>
++</client>
++</testcase>
+diff --git a/tests/data/test3304 b/tests/data/test3304
+new file mode 100644
+index 0000000000..4380c0819f
+--- /dev/null
++++ b/tests/data/test3304
+@@ -0,0 +1,20 @@
++<?xml version="1.0" encoding="US-ASCII"?>
++<testcase>
++<info>
++<keywords>
++unittest
++TLS
++mTLS
++</keywords>
++</info>
++
++# Client-side
++<client>
++<features>
++unittest
++</features>
++<name>
++TLS session cache peer key discriminates on mTLS key, key_type and cert_type fields
++</name>
++</client>
++</testcase>
+diff --git a/tests/unit/Makefile.inc b/tests/unit/Makefile.inc
+index 149636cbcc..bba30f6706 100644
+--- a/tests/unit/Makefile.inc
++++ b/tests/unit/Makefile.inc
+@@ -43,4 +43,5 @@ TESTS_C = \
+ unit1979.c unit1980.c \
+ unit2600.c unit2601.c unit2602.c unit2603.c unit2604.c unit2605.c \
+ unit3200.c unit3205.c \
+- unit3211.c unit3212.c unit3213.c unit3214.c unit3216.c
++ unit3211.c unit3212.c unit3213.c unit3214.c unit3216.c \
++ unit3303.c unit3304.c
+diff --git a/tests/unit/unit3303.c b/tests/unit/unit3303.c
+new file mode 100644
+index 0000000000..41bced542d
+--- /dev/null
++++ b/tests/unit/unit3303.c
+@@ -0,0 +1,127 @@
++/***************************************************************************
++ * _ _ ____ _
++ * Project ___| | | | _ \| |
++ * / __| | | | |_) | |
++ * | (__| |_| | _ <| |___
++ * \___|\___/|_| \_\_____|
++ *
++ * Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
++ *
++ * This software is licensed as described in the file COPYING, which
++ * you should have received as part of this distribution. The terms
++ * are also available at https://curl.se/docs/copyright.html.
++ *
++ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
++ * copies of the Software, and permit persons to whom the Software is
++ * furnished to do so, under the terms of the COPYING file.
++ *
++ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
++ * KIND, either express or implied.
++ *
++ * SPDX-License-Identifier: curl
++ *
++ ***************************************************************************/
++#include "unitcheck.h"
++#include "urldata.h"
++
++#ifdef USE_SSL
++#include "vtls/vtls.h"
++#endif
++
++static CURLcode test_unit3303(const char *arg)
++{
++ UNITTEST_BEGIN_SIMPLE
++
++#ifdef USE_SSL
++ {
++ CURL *curl;
++ struct connectdata *conn;
++ struct ssl_primary_config *primary;
++ char *saved;
++ static char alt_passwd[] = "wrong";
++ static char alt_key[] = "other.key";
++ static char alt_ktype[] = "DER";
++ static char alt_ctype[] = "P12";
++
++ curl_global_init(CURL_GLOBAL_ALL);
++ curl = curl_easy_init();
++ if(!curl) {
++ curl_global_cleanup();
++ goto unit_test_abort;
++ }
++
++ curl_easy_setopt(curl, CURLOPT_SSLCERT, "client.pem");
++ curl_easy_setopt(curl, CURLOPT_SSLKEY, "client.key");
++ curl_easy_setopt(curl, CURLOPT_KEYPASSWD, "secret");
++ curl_easy_setopt(curl, CURLOPT_SSLCERTTYPE, "PEM");
++ curl_easy_setopt(curl, CURLOPT_SSLKEYTYPE, "PEM");
++
++ if(Curl_ssl_easy_config_complete((struct Curl_easy *)curl)) {
++ curl_easy_cleanup(curl);
++ curl_global_cleanup();
++ goto unit_test_abort;
++ }
++
++ conn = curlx_calloc(1, sizeof(*conn));
++ if(!conn || Curl_ssl_conn_config_init((struct Curl_easy *)curl, conn)) {
++ if(conn)
++ Curl_ssl_conn_config_cleanup(conn);
++ curlx_free(conn);
++ curl_easy_cleanup(curl);
++ curl_global_cleanup();
++ goto unit_test_abort;
++ }
++
++ /* Baseline: identical config must match. */
++ fail_unless(Curl_ssl_conn_config_match((struct Curl_easy *)curl, conn,
++ FALSE),
++ "identical mTLS config should match");
++
++ primary = &((struct Curl_easy *)curl)->set.ssl.primary;
++
++ /* Different key_passwd must not match. */
++ saved = primary->key_passwd;
++ primary->key_passwd = alt_passwd;
++ fail_unless(!Curl_ssl_conn_config_match((struct Curl_easy *)curl, conn,
++ FALSE),
++ "different key_passwd must not reuse conn");
++ primary->key_passwd = saved;
++
++ /* Different key path must not match. */
++ saved = primary->key;
++ primary->key = alt_key;
++ fail_unless(!Curl_ssl_conn_config_match((struct Curl_easy *)curl, conn,
++ FALSE),
++ "different key must not reuse conn");
++ primary->key = saved;
++
++ /* Different key type must not match. */
++ saved = primary->key_type;
++ primary->key_type = alt_ktype;
++ fail_unless(!Curl_ssl_conn_config_match((struct Curl_easy *)curl, conn,
++ FALSE),
++ "different key_type must not reuse conn");
++ primary->key_type = saved;
++
++ /* Different cert type must not match. */
++ saved = primary->cert_type;
++ primary->cert_type = alt_ctype;
++ fail_unless(!Curl_ssl_conn_config_match((struct Curl_easy *)curl, conn,
++ FALSE),
++ "different cert_type must not reuse conn");
++ primary->cert_type = saved;
++
++ /* All fields restored: must match again. */
++ fail_unless(Curl_ssl_conn_config_match((struct Curl_easy *)curl, conn,
++ FALSE),
++ "restored mTLS config should match");
++
++ Curl_ssl_conn_config_cleanup(conn);
++ curlx_free(conn);
++ curl_easy_cleanup(curl);
++ curl_global_cleanup();
++ }
++#endif /* USE_SSL */
++
++ UNITTEST_END_SIMPLE
++}
+diff --git a/tests/unit/unit3304.c b/tests/unit/unit3304.c
+new file mode 100644
+index 0000000000..4defa1e426
+--- /dev/null
++++ b/tests/unit/unit3304.c
+@@ -0,0 +1,163 @@
++/***************************************************************************
++ * _ _ ____ _
++ * Project ___| | | | _ \| |
++ * / __| | | | |_) | |
++ * | (__| |_| | _ <| |___
++ * \___|\___/|_| \_\_____|
++ *
++ * Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
++ *
++ * This software is licensed as described in the file COPYING, which
++ * you should have received as part of this distribution. The terms
++ * are also available at https://curl.se/docs/copyright.html.
++ *
++ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
++ * copies of the Software, and permit persons to whom the Software is
++ * furnished to do so, under the terms of the COPYING file.
++ *
++ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
++ * KIND, either express or implied.
++ *
++ * SPDX-License-Identifier: curl
++ *
++ ***************************************************************************/
++
++/* Unit tests for TLS session cache peer key discrimination on mTLS fields.
++ * Verifies that Curl_ssl_peer_key_build() produces distinct keys when two
++ * handles differ only on key, key_type or cert_type. key_passwd is NOT
++ * embedded in the peer key; it is compared separately at session lookup via
++ * cf_ssl_scache_match_auth(), following the same pattern as SRP
++ * credentials. */
++
++#include "unitcheck.h"
++#include "urldata.h"
++
++#ifdef USE_SSL
++#include "vtls/vtls.h"
++#include "vtls/vtls_scache.h"
++#endif
++
++static CURLcode test_unit3304(const char *arg)
++{
++ UNITTEST_BEGIN_SIMPLE
++
++#ifdef USE_SSL
++ {
++ struct ssl_peer peer;
++ struct ssl_primary_config ssl;
++ char *key1 = NULL;
++ char *key2 = NULL;
++ static char base_hostname[] = "example.com";
++ static char base_cert[] = "client.pem";
++ static char base_key[] = "client.key";
++ static char base_passwd[] = "secret";
++ static char base_ctype[] = "PEM";
++ static char base_ktype[] = "PEM";
++ static char alt_key[] = "other.key";
++ static char alt_ktype[] = "DER";
++ static char alt_ctype[] = "P12";
++ static char lc_ctype[] = "pem";
++ static char lc_ktype[] = "pem";
++
++ memset(&peer, 0, sizeof(peer));
++ peer.hostname = base_hostname;
++ peer.port = 443;
++ peer.transport = TRNSPRT_TCP;
++
++ memset(&ssl, 0, sizeof(ssl));
++ ssl.verifypeer = TRUE;
++ ssl.verifyhost = TRUE;
++ ssl.clientcert = base_cert;
++ ssl.key = base_key;
++ ssl.key_passwd = base_passwd;
++ ssl.cert_type = base_ctype;
++ ssl.key_type = base_ktype;
++
++ /* Baseline: same config produces same key. */
++ fail_unless(!Curl_ssl_peer_key_build(&ssl, &peer, NULL, "test", &key1),
++ "peer key build failed");
++ fail_unless(!Curl_ssl_peer_key_build(&ssl, &peer, NULL, "test", &key2),
++ "peer key build failed");
++ fail_unless(key1 && key2 && !strcmp(key1, key2),
++ "identical config should produce identical peer key");
++ curlx_free(key1); key1 = NULL;
++ curlx_free(key2); key2 = NULL;
++
++ /* key_passwd is NOT in the peer key: lookup uses timing-safe comparison
++ * via cf_ssl_scache_match_auth(), same as SRP credentials. */
++ fail_unless(!Curl_ssl_peer_key_build(&ssl, &peer, NULL, "test", &key1),
++ "peer key build failed");
++ ssl.key_passwd = NULL;
++ fail_unless(!Curl_ssl_peer_key_build(&ssl, &peer, NULL, "test", &key2),
++ "peer key build failed");
++ fail_unless(key1 && key2 && !strcmp(key1, key2),
++ "key_passwd must not affect the peer key");
++ curlx_free(key1); key1 = NULL;
++ curlx_free(key2); key2 = NULL;
++ ssl.key_passwd = base_passwd;
++
++ /* Different key path must produce a different peer key. */
++ fail_unless(!Curl_ssl_peer_key_build(&ssl, &peer, NULL, "test", &key1),
++ "peer key build failed");
++ ssl.key = alt_key;
++ fail_unless(!Curl_ssl_peer_key_build(&ssl, &peer, NULL, "test", &key2),
++ "peer key build failed");
++ fail_unless(key1 && key2 && strcmp(key1, key2),
++ "different key must produce different peer key");
++ curlx_free(key1); key1 = NULL;
++ curlx_free(key2); key2 = NULL;
++ ssl.key = base_key;
++
++ /* Different key_type must produce a different peer key. */
++ fail_unless(!Curl_ssl_peer_key_build(&ssl, &peer, NULL, "test", &key1),
++ "peer key build failed");
++ ssl.key_type = alt_ktype;
++ fail_unless(!Curl_ssl_peer_key_build(&ssl, &peer, NULL, "test", &key2),
++ "peer key build failed");
++ fail_unless(key1 && key2 && strcmp(key1, key2),
++ "different key_type must produce different peer key");
++ curlx_free(key1); key1 = NULL;
++ curlx_free(key2); key2 = NULL;
++ ssl.key_type = base_ktype;
++
++ /* Different cert_type must produce a different peer key. */
++ fail_unless(!Curl_ssl_peer_key_build(&ssl, &peer, NULL, "test", &key1),
++ "peer key build failed");
++ ssl.cert_type = alt_ctype;
++ fail_unless(!Curl_ssl_peer_key_build(&ssl, &peer, NULL, "test", &key2),
++ "peer key build failed");
++ fail_unless(key1 && key2 && strcmp(key1, key2),
++ "different cert_type must produce different peer key");
++ curlx_free(key1); key1 = NULL;
++ curlx_free(key2); key2 = NULL;
++ ssl.cert_type = base_ctype;
++
++ /* cert_type is case-insensitive: "PEM" and "pem" must produce the
++ * same peer key, consistent with the conn-reuse comparison. */
++ fail_unless(!Curl_ssl_peer_key_build(&ssl, &peer, NULL, "test", &key1),
++ "peer key build failed");
++ ssl.cert_type = lc_ctype;
++ fail_unless(!Curl_ssl_peer_key_build(&ssl, &peer, NULL, "test", &key2),
++ "peer key build failed");
++ fail_unless(key1 && key2 && !strcmp(key1, key2),
++ "cert_type case must not affect peer key");
++ curlx_free(key1); key1 = NULL;
++ curlx_free(key2); key2 = NULL;
++ ssl.cert_type = base_ctype;
++
++ /* key_type is case-insensitive: "PEM" and "pem" must produce the
++ * same peer key. */
++ fail_unless(!Curl_ssl_peer_key_build(&ssl, &peer, NULL, "test", &key1),
++ "peer key build failed");
++ ssl.key_type = lc_ktype;
++ fail_unless(!Curl_ssl_peer_key_build(&ssl, &peer, NULL, "test", &key2),
++ "peer key build failed");
++ fail_unless(key1 && key2 && !strcmp(key1, key2),
++ "key_type case must not affect peer key");
++ curlx_free(key1); key1 = NULL;
++ curlx_free(key2); key2 = NULL;
++ }
++#endif /* USE_SSL */
++
++ UNITTEST_END_SIMPLE
++}
+--
+2.35.6
diff --git a/meta/recipes-support/curl/curl_8.19.0.bb b/meta/recipes-support/curl/curl_8.19.0.bb
index 193366f657..994b1cff28 100644
--- a/meta/recipes-support/curl/curl_8.19.0.bb
+++ b/meta/recipes-support/curl/curl_8.19.0.bb
@@ -25,6 +25,8 @@ SRC_URI = " \
file://CVE-2026-4873.patch \
file://CVE-2026-8286.patch \
file://CVE-2026-8927.patch \
+ file://CVE-2026-8932-dependent.patch \
+ file://CVE-2026-8932.patch \
"
SRC_URI:append:class-nativesdk = " \
--
2.35.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [OE-core][wrynose][PATCH 5/8] curl: fix CVE-2026-8458
2026-08-05 8:30 [OE-core][wrynose][PATCH 0/8] curl: Security fixes Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
` (3 preceding siblings ...)
2026-08-05 8:30 ` [OE-core][wrynose][PATCH 4/8] curl: fix CVE-2026-8932 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
@ 2026-08-05 8:31 ` Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:31 ` [OE-core][wrynose][PATCH 6/8] curl: fix CVE-2026-11856 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco) @ 2026-08-05 8:31 UTC (permalink / raw)
To: openembedded-core
From: Deepak Rathore <deeratho@cisco.com>
This patch applies the upstream curl security fix backport for
CVE-2026-8458. The upstream fix commit is referenced in [1],
and the public curl advisory is referenced in [2]. The backported
commit link is also recorded in the embedded patch header.
[1] https://github.com/curl/curl/commit/5e99b73cf441d9c369768b9cd48b5389b9a2503d
[2] https://curl.se/docs/CVE-2026-8458.html
Signed-off-by: Deepak Rathore <deeratho@cisco.com>
---
.../curl/curl/CVE-2026-8458.patch | 202 ++++++++++++++++++
meta/recipes-support/curl/curl_8.19.0.bb | 1 +
2 files changed, 203 insertions(+)
create mode 100644 meta/recipes-support/curl/curl/CVE-2026-8458.patch
diff --git a/meta/recipes-support/curl/curl/CVE-2026-8458.patch b/meta/recipes-support/curl/curl/CVE-2026-8458.patch
new file mode 100644
index 0000000000..6340f5305f
--- /dev/null
+++ b/meta/recipes-support/curl/curl/CVE-2026-8458.patch
@@ -0,0 +1,202 @@
+From 01ce94b67888e6efa4196247302e59cf68e77b2d Mon Sep 17 00:00:00 2001
+From: Stefan Eissing <stefan@eissing.org>
+Date: Mon, 13 Jul 2026 23:13:37 -0700
+Subject: [PATCH] creds: add sasl service name
+
+The SASL service name, used in authentication, is part of curl's credentials
+when authenticating to a server/proxy. Make it part of `struct Curl_creds`.
+
+Change code to use `creds` to obtain a service name. By tying creds used
+to the connection, connection reuse is also only allowed when the service
+name matches.
+
+Closes #21585
+
+CVE: CVE-2026-8458
+Upstream-Status: Backport [https://github.com/curl/curl/commit/5e99b73cf441d9c369768b9cd48b5389b9a2503d]
+
+Backport Changes:
+- Wrynose curl 8.19.0 does not have upstream struct Curl_creds.
+ This backport stores the optional SASL service name on the existing
+ connectdata/proxy_info structures and compares it during connection
+ reuse for the same security behavior.
+- Omitted the upstream unit1304 Curl_creds_create() signature
+ adjustment because Wrynose 8.19.0 does not contain Curl_creds.
+
+(cherry picked from commit 5e99b73cf441d9c369768b9cd48b5389b9a2503d)
+Signed-off-by: Deepak Rathore <deeratho@cisco.com>
+---
+ lib/url.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++-----
+ lib/urldata.h | 2 ++
+ 2 files changed, 58 insertions(+), 5 deletions(-)
+
+diff --git a/lib/url.c b/lib/url.c
+index 6c1375f8e3..35f467daf2 100644
+--- a/lib/url.c
++++ b/lib/url.c
+@@ -535,12 +535,15 @@ void Curl_conn_free(struct Curl_easy *data, struct connectdata *conn)
+ Curl_safefree(conn->socks_proxy.user);
+ Curl_safefree(conn->http_proxy.passwd);
+ Curl_safefree(conn->socks_proxy.passwd);
++ Curl_safefree(conn->http_proxy.sasl_service_name);
++ Curl_safefree(conn->socks_proxy.sasl_service_name);
+ Curl_safefree(conn->http_proxy.host.rawalloc); /* http proxy name buffer */
+ Curl_safefree(conn->socks_proxy.host.rawalloc); /* socks proxy name buffer */
+ #endif
+ Curl_safefree(conn->user);
+ Curl_safefree(conn->passwd);
+ Curl_safefree(conn->sasl_authzid);
++ Curl_safefree(conn->sasl_service_name);
+ Curl_safefree(conn->options);
+ Curl_safefree(conn->oauth_bearer);
+ Curl_safefree(conn->host.rawalloc); /* hostname buffer */
+@@ -593,7 +596,9 @@ static bool proxy_info_matches(const struct proxy_info *data,
+ curl_strequal(data->host.name, needle->host.name)) {
+
+ if(Curl_timestrcmp(data->user, needle->user) ||
+- Curl_timestrcmp(data->passwd, needle->passwd))
++ Curl_timestrcmp(data->passwd, needle->passwd) ||
++ Curl_timestrcmp(data->sasl_service_name,
++ needle->sasl_service_name))
+ return FALSE;
+ return TRUE;
+ }
+@@ -1035,6 +1040,8 @@ static bool url_match_auth(struct connectdata *conn,
+ if(Curl_timestrcmp(m->needle->user, conn->user) ||
+ Curl_timestrcmp(m->needle->passwd, conn->passwd) ||
+ Curl_timestrcmp(m->needle->sasl_authzid, conn->sasl_authzid) ||
++ Curl_timestrcmp(m->needle->sasl_service_name,
++ conn->sasl_service_name) ||
+ Curl_timestrcmp(m->needle->oauth_bearer, conn->oauth_bearer)) {
+ /* one of them was different */
+ return FALSE;
+@@ -1116,7 +1123,9 @@ static bool url_match_auth_ntlm(struct connectdata *conn,
+ partway through a handshake!) */
+ if(m->want_ntlm_http) {
+ if(Curl_timestrcmp(m->needle->user, conn->user) ||
+- Curl_timestrcmp(m->needle->passwd, conn->passwd)) {
++ Curl_timestrcmp(m->needle->passwd, conn->passwd) ||
++ Curl_timestrcmp(m->needle->sasl_service_name,
++ conn->sasl_service_name)) {
+ /* we prefer a credential match, but this is at least a connection
+ that can be reused and "upgraded" to NTLM if it does
+ not have any auth ongoing. */
+@@ -1147,7 +1156,9 @@ static bool url_match_auth_ntlm(struct connectdata *conn,
+ if(Curl_timestrcmp(m->needle->http_proxy.user,
+ conn->http_proxy.user) ||
+ Curl_timestrcmp(m->needle->http_proxy.passwd,
+- conn->http_proxy.passwd))
++ conn->http_proxy.passwd) ||
++ Curl_timestrcmp(m->needle->http_proxy.sasl_service_name,
++ conn->http_proxy.sasl_service_name))
+ return FALSE;
+ }
+ else if(conn->proxy_ntlm_state != NTLMSTATE_NONE) {
+@@ -1188,7 +1199,9 @@ static bool url_match_auth_nego(struct connectdata *conn,
+ so that we can reuse Negotiate connections if possible. */
+ if(m->want_nego_http) {
+ if(Curl_timestrcmp(m->needle->user, conn->user) ||
+- Curl_timestrcmp(m->needle->passwd, conn->passwd))
++ Curl_timestrcmp(m->needle->passwd, conn->passwd) ||
++ Curl_timestrcmp(m->needle->sasl_service_name,
++ conn->sasl_service_name))
+ return FALSE;
+ }
+ else if(conn->http_negotiate_state != GSS_AUTHNONE) {
+@@ -1207,7 +1220,9 @@ static bool url_match_auth_nego(struct connectdata *conn,
+ if(Curl_timestrcmp(m->needle->http_proxy.user,
+ conn->http_proxy.user) ||
+ Curl_timestrcmp(m->needle->http_proxy.passwd,
+- conn->http_proxy.passwd))
++ conn->http_proxy.passwd) ||
++ Curl_timestrcmp(m->needle->http_proxy.sasl_service_name,
++ conn->http_proxy.sasl_service_name))
+ return FALSE;
+ }
+ else if(conn->proxy_negotiate_state != GSS_AUTHNONE) {
+@@ -3196,6 +3211,11 @@ static void url_conn_reuse_adjust(struct Curl_easy *data,
+ needle->user = NULL;
+ needle->passwd = NULL;
+ }
++ if(needle->sasl_service_name) {
++ curlx_free(conn->sasl_service_name);
++ conn->sasl_service_name = needle->sasl_service_name;
++ needle->sasl_service_name = NULL;
++ }
+
+ #ifndef CURL_DISABLE_PROXY
+ conn->bits.proxy_user_passwd = needle->bits.proxy_user_passwd;
+@@ -3214,6 +3234,17 @@ static void url_conn_reuse_adjust(struct Curl_easy *data,
+ needle->http_proxy.passwd = NULL;
+ needle->socks_proxy.passwd = NULL;
+ }
++ if(needle->http_proxy.sasl_service_name ||
++ needle->socks_proxy.sasl_service_name) {
++ curlx_free(conn->http_proxy.sasl_service_name);
++ curlx_free(conn->socks_proxy.sasl_service_name);
++ conn->http_proxy.sasl_service_name =
++ needle->http_proxy.sasl_service_name;
++ conn->socks_proxy.sasl_service_name =
++ needle->socks_proxy.sasl_service_name;
++ needle->http_proxy.sasl_service_name = NULL;
++ needle->socks_proxy.sasl_service_name = NULL;
++ }
+ #endif
+
+ /* Finding a connection for reuse in the cpool matches, among other
+@@ -3283,6 +3314,15 @@ static CURLcode url_create_needle(struct Curl_easy *data,
+ }
+ }
+
++ if(data->set.str[STRING_SERVICE_NAME]) {
++ needle->sasl_service_name =
++ curlx_strdup(data->set.str[STRING_SERVICE_NAME]);
++ if(!needle->sasl_service_name) {
++ result = CURLE_OUT_OF_MEMORY;
++ goto out;
++ }
++ }
++
+ if(data->set.str[STRING_BEARER]) {
+ needle->oauth_bearer = curlx_strdup(data->set.str[STRING_BEARER]);
+ if(!needle->oauth_bearer) {
+@@ -3310,6 +3350,17 @@ static CURLcode url_create_needle(struct Curl_easy *data,
+ if(result)
+ goto out;
+
++ if(data->set.str[STRING_PROXY_SERVICE_NAME]) {
++ result = Curl_setstropt(&needle->http_proxy.sasl_service_name,
++ data->set.str[STRING_PROXY_SERVICE_NAME]);
++ if(result)
++ goto out;
++ result = Curl_setstropt(&needle->socks_proxy.sasl_service_name,
++ data->set.str[STRING_PROXY_SERVICE_NAME]);
++ if(result)
++ goto out;
++ }
++
+ /*************************************************************
+ * If the protocol is using SSL and HTTP proxy is used, we set
+ * the tunnel_proxy bit.
+diff --git a/lib/urldata.h b/lib/urldata.h
+index 6c6c83969c..1c369a54f2 100644
+--- a/lib/urldata.h
++++ b/lib/urldata.h
+@@ -586,6 +586,7 @@ struct proxy_info {
+ uint8_t proxytype; /* what kind of proxy that is in use */
+ char *user; /* proxy username string, allocated */
+ char *passwd; /* proxy password string, allocated */
++ char *sasl_service_name; /* SASL service name, allocated */
+ };
+
+ /*
+@@ -628,6 +629,7 @@ struct connectdata {
+ char *passwd; /* password string, allocated */
+ char *options; /* options string, allocated */
+ char *sasl_authzid; /* authorization identity string, allocated */
++ char *sasl_service_name; /* SASL service name, allocated */
+ char *oauth_bearer; /* OAUTH2 bearer, allocated */
+ struct curltime created; /* creation time */
+ struct curltime lastused; /* when returned to the connection poolas idle */
+--
+2.35.6
diff --git a/meta/recipes-support/curl/curl_8.19.0.bb b/meta/recipes-support/curl/curl_8.19.0.bb
index 994b1cff28..33ccb73eb3 100644
--- a/meta/recipes-support/curl/curl_8.19.0.bb
+++ b/meta/recipes-support/curl/curl_8.19.0.bb
@@ -27,6 +27,7 @@ SRC_URI = " \
file://CVE-2026-8927.patch \
file://CVE-2026-8932-dependent.patch \
file://CVE-2026-8932.patch \
+ file://CVE-2026-8458.patch \
"
SRC_URI:append:class-nativesdk = " \
--
2.35.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [OE-core][wrynose][PATCH 6/8] curl: fix CVE-2026-11856
2026-08-05 8:30 [OE-core][wrynose][PATCH 0/8] curl: Security fixes Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
` (4 preceding siblings ...)
2026-08-05 8:31 ` [OE-core][wrynose][PATCH 5/8] curl: fix CVE-2026-8458 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
@ 2026-08-05 8:31 ` Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:31 ` [OE-core][wrynose][PATCH 7/8] curl: set CVE_STATUS for CVE-2026-9547 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:31 ` [OE-core][wrynose][PATCH 8/8] curl: set CVE_STATUS for CVE-2026-12064 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
7 siblings, 0 replies; 9+ messages in thread
From: Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco) @ 2026-08-05 8:31 UTC (permalink / raw)
To: openembedded-core
From: Deepak Rathore <deeratho@cisco.com>
This patch applies the upstream curl security backports for
CVE-2026-11856. The main fix commit is referenced in [1], the
Digest proxy-state follow-up is referenced in [2], and the public
curl advisory is referenced in [3]. The individual backported commit
links are recorded in the embedded patch headers.
[1] https://github.com/curl/curl/commit/5c6b4880357ab3e72967c1c45cae0f96ffabc535
[2] https://github.com/curl/curl/commit/7ec25148c06b049d3252172ff17fae85b19c54c9
[3] https://curl.se/docs/CVE-2026-11856.html
Signed-off-by: Deepak Rathore <deeratho@cisco.com>
---
.../curl/curl/CVE-2026-11856_p1.patch | 372 ++++++++++++++++++
.../curl/curl/CVE-2026-11856_p2.patch | 72 ++++
meta/recipes-support/curl/curl_8.19.0.bb | 2 +
3 files changed, 446 insertions(+)
create mode 100644 meta/recipes-support/curl/curl/CVE-2026-11856_p1.patch
create mode 100644 meta/recipes-support/curl/curl/CVE-2026-11856_p2.patch
diff --git a/meta/recipes-support/curl/curl/CVE-2026-11856_p1.patch b/meta/recipes-support/curl/curl/CVE-2026-11856_p1.patch
new file mode 100644
index 0000000000..80fb18a7c1
--- /dev/null
+++ b/meta/recipes-support/curl/curl/CVE-2026-11856_p1.patch
@@ -0,0 +1,372 @@
+From 3349fbcb7876456cadc3cc3a8d3e8aff29406906 Mon Sep 17 00:00:00 2001
+From: Daniel Stenberg <daniel@haxx.se>
+Date: Mon, 13 Jul 2026 23:17:23 -0700
+Subject: [PATCH] digest: flush state on origin or credential change
+
+Verified by test 1686
+
+Closes #21944
+
+CVE: CVE-2026-11856
+Upstream-Status: Backport [https://github.com/curl/curl/commit/5c6b4880357ab3e72967c1c45cae0f96ffabc535]
+
+Backport Changes:
+- Wrynose curl 8.19.0 does not have upstream Curl_peer or
+ struct Curl_creds. This backport stores the host Digest origin
+ and user/password on digestdata, then flushes stale host Digest
+ state before reuse when either value changes.
+- Kept Wrynose test-list ordering and added only the upstream
+ test1686/lib1686 regression coverage.
+
+(cherry picked from commit 5c6b4880357ab3e72967c1c45cae0f96ffabc535)
+Signed-off-by: Deepak Rathore <deeratho@cisco.com>
+---
+ lib/http_digest.c | 50 ++++++++++++++++++++
+ lib/urldata.h | 3 ++
+ lib/vauth/digest.c | 3 ++
+ lib/vauth/digest_sspi.c | 4 ++
+ tests/data/Makefile.am | 2 +-
+ tests/data/test1686 | 84 +++++++++++++++++++++++++++++++++
+ tests/libtest/Makefile.inc | 1 +
+ tests/libtest/lib1686.c | 96 ++++++++++++++++++++++++++++++++++++++
+ 8 files changed, 242 insertions(+), 1 deletion(-)
+ create mode 100644 tests/data/test1686
+ create mode 100644 tests/libtest/lib1686.c
+
+diff --git a/lib/http_digest.c b/lib/http_digest.c
+index f5b20c5e9d..29bfa3b0b3 100644
+--- a/lib/http_digest.c
++++ b/lib/http_digest.c
+@@ -29,6 +29,7 @@
+ #include "strcase.h"
+ #include "vauth/vauth.h"
+ #include "http_digest.h"
++#include "curlx/strdup.h"
+ #include "curlx/strparse.h"
+
+ /* Test example headers:
+@@ -38,6 +39,49 @@ Proxy-Authenticate: Digest realm="testrealm", nonce="1053604598"
+
+ */
+
++static CURLcode digest_update_origin(struct Curl_easy *data,
++ struct digestdata *digest,
++ const char *userp,
++ const char *passwdp)
++{
++ char *origin;
++ char *authuser;
++ char *authpasswd;
++ bool flush = FALSE;
++
++ origin = curl_maprintf("%s:%d:%s", data->conn->scheme->name,
++ data->conn->remote_port, data->conn->host.name);
++ if(!origin)
++ return CURLE_OUT_OF_MEMORY;
++
++ authuser = curlx_strdup(userp);
++ authpasswd = curlx_strdup(passwdp);
++ if(!authuser || !authpasswd) {
++ curlx_free(origin);
++ curlx_free(authuser);
++ curlx_free(authpasswd);
++ return CURLE_OUT_OF_MEMORY;
++ }
++
++ if(digest->authorigin && Curl_timestrcmp(digest->authorigin, origin))
++ flush = TRUE;
++ else if(digest->authuser && Curl_timestrcmp(digest->authuser, userp))
++ flush = TRUE;
++ else if(digest->authpasswd && Curl_timestrcmp(digest->authpasswd, passwdp))
++ flush = TRUE;
++
++ if(flush)
++ Curl_auth_digest_cleanup(digest);
++
++ Curl_safefree(digest->authorigin);
++ Curl_safefree(digest->authuser);
++ Curl_safefree(digest->authpasswd);
++ digest->authorigin = origin;
++ digest->authuser = authuser;
++ digest->authpasswd = authpasswd;
++ return CURLE_OK;
++}
++
+ CURLcode Curl_input_digest(struct Curl_easy *data,
+ bool proxy,
+ const char *header) /* rest of the *-authenticate:
+@@ -114,6 +158,12 @@ CURLcode Curl_output_digest(struct Curl_easy *data,
+ if(!passwdp)
+ passwdp = "";
+
++ if(!proxy) {
++ result = digest_update_origin(data, digest, userp, passwdp);
++ if(result)
++ return result;
++ }
++
+ #ifdef USE_WINDOWS_SSPI
+ have_chlg = !!digest->input_token;
+ #else
+diff --git a/lib/urldata.h b/lib/urldata.h
+index 455ed7f996..113f6e7102 100644
+--- a/lib/urldata.h
++++ b/lib/urldata.h
+@@ -283,6 +283,9 @@ struct ssl_general_config {
+ #ifndef CURL_DISABLE_DIGEST_AUTH
+ /* Struct used for Digest challenge-response authentication */
+ struct digestdata {
++ char *authorigin; /* origin used for the host Digest state */
++ char *authuser; /* user used for the host Digest state */
++ char *authpasswd; /* password used for the host Digest state */
+ #ifdef USE_WINDOWS_SSPI
+ BYTE *input_token;
+ size_t input_token_len;
+diff --git a/lib/vauth/digest.c b/lib/vauth/digest.c
+index 9609390387..1feee07764 100644
+--- a/lib/vauth/digest.c
++++ b/lib/vauth/digest.c
+@@ -1028,6 +1028,9 @@ CURLcode Curl_auth_create_digest_http_message(struct Curl_easy *data,
+ */
+ void Curl_auth_digest_cleanup(struct digestdata *digest)
+ {
++ Curl_safefree(digest->authorigin);
++ Curl_safefree(digest->authuser);
++ Curl_safefree(digest->authpasswd);
+ Curl_safefree(digest->nonce);
+ Curl_safefree(digest->cnonce);
+ Curl_safefree(digest->realm);
+diff --git a/lib/vauth/digest_sspi.c b/lib/vauth/digest_sspi.c
+index f29e569cd1..4688a7b5c5 100644
+--- a/lib/vauth/digest_sspi.c
++++ b/lib/vauth/digest_sspi.c
+@@ -636,6 +636,10 @@ CURLcode Curl_auth_create_digest_http_message(struct Curl_easy *data,
+ */
+ void Curl_auth_digest_cleanup(struct digestdata *digest)
+ {
++ Curl_safefree(digest->authorigin);
++ Curl_safefree(digest->authuser);
++ Curl_safefree(digest->authpasswd);
++
+ /* Free the input token */
+ Curl_safefree(digest->input_token);
+
+diff --git a/tests/data/Makefile.am b/tests/data/Makefile.am
+index f9d20a9cc8..89eae33ca0 100644
+--- a/tests/data/Makefile.am
++++ b/tests/data/Makefile.am
+@@ -226,7 +226,7 @@ test1660 test1661 test1662 test1663 test1664 test1665 \
+ \
+ test1670 test1671 \
+ \
+-test1680 test1681 test1682 test1683 \
++test1680 test1681 test1682 test1683 test1686 \
+ \
+ test1700 test1701 test1702 test1703 test1704 test1705 test1706 test1707 \
+ test1708 test1709 test1710 test1711 test1712 \
+diff --git a/tests/data/test1686 b/tests/data/test1686
+new file mode 100644
+index 0000000000..2d419ad608
+--- /dev/null
++++ b/tests/data/test1686
+@@ -0,0 +1,84 @@
++<?xml version="1.0" encoding="US-ASCII"?>
++<testcase>
++<info>
++<keywords>
++HTTP
++Digest
++</keywords>
++</info>
++
++<reply>
++<data crlf="headers" nocheck="yes">
++HTTP/1.1 401 Authorization Required
++Server: Apache/1.3.27 (Darwin) PHP/4.1.2
++WWW-Authenticate: Digest realm="my-backyard", nonce="314156295"
++Content-Length: 26
++
++This is not the real page
++</data>
++
++# This is supposed to be returned when the server gets a
++# Authorization: Digest line passed-in from the client
++<data1000 crlf="headers">
++HTTP/1.1 200 OK
++Server: Apache/1.3.27 (Darwin) PHP/4.1.2
++Content-Type: text/html; charset=iso-8859-1
++Content-Length: 23
++
++This IS the real page!
++</data1000>
++
++</reply>
++
++<client>
++<features>
++!SSPI
++crypto
++digest
++</features>
++<server>
++http
++</server>
++<name>
++HTTP Digest to different origins and switching credentials
++</name>
++<tool>
++lib%TESTNUMBER
++</tool>
++<command>
++%HOSTIP %HTTPPORT
++</command>
++</client>
++
++<verify>
++<protocol crlf="headers">
++GET /api HTTP/1.1
++Host: first.test:%HTTPPORT
++Accept: */*
++
++GET /api HTTP/1.1
++Host: first.test:%HTTPPORT
++Authorization: Digest username="alice", realm="my-backyard", nonce="314156295", uri="/api", response="4ecc00e567c37a9d537727890c2e5b32"
++Accept: */*
++
++GET /hook HTTP/1.1
++Host: second.test:%HTTPPORT
++Accept: */*
++
++GET /hook HTTP/1.1
++Host: second.test:%HTTPPORT
++Authorization: Digest username="alice", realm="my-backyard", nonce="314156295", uri="/hook", response="d3a7738fb6a23f5543fb8dacc0f0f253"
++Accept: */*
++
++GET /hook HTTP/1.1
++Host: second.test:%HTTPPORT
++Accept: */*
++
++GET /hook HTTP/1.1
++Host: second.test:%HTTPPORT
++Authorization: Digest username="bob", realm="my-backyard", nonce="314156295", uri="/hook", response="777e68eddb77294d9cbd6134973cbbab"
++Accept: */*
++
++</protocol>
++</verify>
++</testcase>
+diff --git a/tests/libtest/Makefile.inc b/tests/libtest/Makefile.inc
+index e938b87bc5..ef23ca4e28 100644
+--- a/tests/libtest/Makefile.inc
++++ b/tests/libtest/Makefile.inc
+@@ -102,6 +102,7 @@ TESTS_C = \
+ lib1598.c lib1599.c \
+ lib1647.c \
+ lib1662.c \
++ lib1686.c \
+ lib1900.c lib1901.c lib1902.c lib1903.c lib1905.c lib1906.c lib1907.c \
+ lib1908.c lib1910.c lib1911.c lib1912.c lib1913.c \
+ lib1915.c lib1916.c lib1918.c lib1919.c lib1920.c \
+diff --git a/tests/libtest/lib1686.c b/tests/libtest/lib1686.c
+new file mode 100644
+index 0000000000..e457012bb9
+--- /dev/null
++++ b/tests/libtest/lib1686.c
+@@ -0,0 +1,96 @@
++/***************************************************************************
++ * _ _ ____ _
++ * Project ___| | | | _ \| |
++ * / __| | | | |_) | |
++ * | (__| |_| | _ <| |___
++ * \___|\___/|_| \_\_____|
++ *
++ * Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
++ *
++ * This software is licensed as described in the file COPYING, which
++ * you should have received as part of this distribution. The terms
++ * are also available at https://curl.se/docs/copyright.html.
++ *
++ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
++ * copies of the Software, and permit persons to whom the Software is
++ * furnished to do so, under the terms of the COPYING file.
++ *
++ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
++ * KIND, either express or implied.
++ *
++ * SPDX-License-Identifier: curl
++ *
++ ***************************************************************************/
++#include "first.h"
++
++static size_t devnull_1686(char *p, size_t s, size_t n, void *u)
++{
++ (void)p;
++ (void)u;
++ return s * n;
++}
++
++#define FIRSTHOST "first.test"
++#define SECONDHOST "second.test"
++
++static CURLcode test_lib1686(const char *hostip)
++{
++ CURL *curl = NULL;
++ CURLcode result = CURLE_OK;
++ const char *httpport = libtest_arg2;
++ char firsturl[100];
++ char secondurl[100];
++ char firstres[100];
++ char secondres[100];
++ struct curl_slist *host = NULL;
++ struct curl_slist *host2 = NULL;
++
++ if(curl_global_init(CURL_GLOBAL_ALL) != CURLE_OK) {
++ curl_mfprintf(stderr, "curl_global_init() failed\n");
++ return TEST_ERR_MAJOR_BAD;
++ }
++
++ /* create strings for CURLOPT_RESOLVE */
++ curl_msnprintf(firstres, sizeof(firstres), "%s:%s:%s",
++ FIRSTHOST, httpport, hostip);
++ curl_msnprintf(secondres, sizeof(secondres), "%s:%s:%s",
++ SECONDHOST, httpport, hostip);
++
++ /* create URLs */
++ curl_msnprintf(firsturl, sizeof(firsturl), "http://%s:%s/api",
++ FIRSTHOST, httpport);
++ curl_msnprintf(secondurl, sizeof(secondurl), "http://%s:%s/hook",
++ SECONDHOST, httpport);
++
++ host = curl_slist_append(NULL, firstres);
++ if(!host)
++ goto test_cleanup;
++ host2 = curl_slist_append(host, secondres);
++ if(!host2)
++ goto test_cleanup;
++ host = host2;
++
++ curl = curl_easy_init();
++ if(curl) {
++ easy_setopt(curl, CURLOPT_RESOLVE, host);
++ easy_setopt(curl, CURLOPT_HTTPAUTH, CURLAUTH_DIGEST);
++ easy_setopt(curl, CURLOPT_USERPWD, "alice:bond");
++ easy_setopt(curl, CURLOPT_WRITEFUNCTION, devnull_1686);
++
++ easy_setopt(curl, CURLOPT_URL, firsturl);
++ result = curl_easy_perform(curl);
++
++ easy_setopt(curl, CURLOPT_URL, secondurl);
++ result = curl_easy_perform(curl);
++
++ easy_setopt(curl, CURLOPT_USERPWD, "bob:secret");
++ easy_setopt(curl, CURLOPT_URL, secondurl);
++ result = curl_easy_perform(curl);
++ }
++
++test_cleanup:
++ curl_easy_cleanup(curl);
++ curl_global_cleanup();
++ curl_slist_free_all(host);
++ return result;
++}
+--
+2.35.6
diff --git a/meta/recipes-support/curl/curl/CVE-2026-11856_p2.patch b/meta/recipes-support/curl/curl/CVE-2026-11856_p2.patch
new file mode 100644
index 0000000000..4e3dc45186
--- /dev/null
+++ b/meta/recipes-support/curl/curl/CVE-2026-11856_p2.patch
@@ -0,0 +1,72 @@
+From 0d7f5b5037e2878ee68ca8317445df1240d117bf Mon Sep 17 00:00:00 2001
+From: alhudz <al.hudz.k@gmail.com>
+Date: Thu, 30 Jul 2026 22:18:13 -0700
+Subject: [PATCH] digest: flush proxy state on proxy or credential change
+
+Closes #21951
+
+CVE: CVE-2026-11856
+Upstream-Status: Backport [https://github.com/curl/curl/commit/7ec25148c06b049d3252172ff17fae85b19c54c9]
+
+Backport Changes:
+- Wrynose curl 8.19.0 does not have upstream Curl_peer or Curl_creds.
+ This backport extends the string-based Digest origin and credential
+ tracking introduced by upstream commit [1] to the proxy path, so
+ proxy Digest state is flushed when the proxy destination or proxy
+ credentials change.
+
+[1] https://github.com/curl/curl/commit/5c6b4880357ab3e72967c1c45cae0f96ffabc535
+
+(cherry picked from commit 7ec25148c06b049d3252172ff17fae85b19c54c9)
+Signed-off-by: Deepak Rathore <deeratho@cisco.com>
+---
+ lib/http_digest.c | 20 +++++++++++++-------
+ 1 file changed, 13 insertions(+), 7 deletions(-)
+
+diff --git a/lib/http_digest.c b/lib/http_digest.c
+index 29bfa3b0b3..06e4028f02 100644
+--- a/lib/http_digest.c
++++ b/lib/http_digest.c
+@@ -41,6 +41,7 @@ Proxy-Authenticate: Digest realm="testrealm", nonce="1053604598"
+
+ static CURLcode digest_update_origin(struct Curl_easy *data,
+ struct digestdata *digest,
++ bool proxy,
+ const char *userp,
+ const char *passwdp)
+ {
+@@ -49,8 +50,15 @@ static CURLcode digest_update_origin(struct Curl_easy *data,
+ char *authpasswd;
+ bool flush = FALSE;
+
+- origin = curl_maprintf("%s:%d:%s", data->conn->scheme->name,
+- data->conn->remote_port, data->conn->host.name);
++#ifndef CURL_DISABLE_PROXY
++ if(proxy)
++ origin = curl_maprintf("%d:%d:%s", data->conn->http_proxy.proxytype,
++ data->conn->http_proxy.port,
++ data->conn->http_proxy.host.name);
++ else
++#endif
++ origin = curl_maprintf("%s:%d:%s", data->conn->scheme->name,
++ data->conn->remote_port, data->conn->host.name);
+ if(!origin)
+ return CURLE_OUT_OF_MEMORY;
+
+@@ -158,11 +166,9 @@ CURLcode Curl_output_digest(struct Curl_easy *data,
+ if(!passwdp)
+ passwdp = "";
+
+- if(!proxy) {
+- result = digest_update_origin(data, digest, userp, passwdp);
+- if(result)
+- return result;
+- }
++ result = digest_update_origin(data, digest, proxy, userp, passwdp);
++ if(result)
++ return result;
+
+ #ifdef USE_WINDOWS_SSPI
+ have_chlg = !!digest->input_token;
+--
+2.35.6
diff --git a/meta/recipes-support/curl/curl_8.19.0.bb b/meta/recipes-support/curl/curl_8.19.0.bb
index 33ccb73eb3..b0edc5b960 100644
--- a/meta/recipes-support/curl/curl_8.19.0.bb
+++ b/meta/recipes-support/curl/curl_8.19.0.bb
@@ -28,6 +28,8 @@ SRC_URI = " \
file://CVE-2026-8932-dependent.patch \
file://CVE-2026-8932.patch \
file://CVE-2026-8458.patch \
+ file://CVE-2026-11856_p1.patch \
+ file://CVE-2026-11856_p2.patch \
"
SRC_URI:append:class-nativesdk = " \
--
2.35.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [OE-core][wrynose][PATCH 7/8] curl: set CVE_STATUS for CVE-2026-9547
2026-08-05 8:30 [OE-core][wrynose][PATCH 0/8] curl: Security fixes Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
` (5 preceding siblings ...)
2026-08-05 8:31 ` [OE-core][wrynose][PATCH 6/8] curl: fix CVE-2026-11856 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
@ 2026-08-05 8:31 ` Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:31 ` [OE-core][wrynose][PATCH 8/8] curl: set CVE_STATUS for CVE-2026-12064 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
7 siblings, 0 replies; 9+ messages in thread
From: Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco) @ 2026-08-05 8:31 UTC (permalink / raw)
To: openembedded-core
From: Deepak Rathore <deeratho@cisco.com>
Analysis:
- CVE-2026-9547 is tied to the libssh backend. [1]
- Wrynose curl 8.19.0 does not enable or expose the libssh
backend in the recipe. [2]
- Hence mark this CVE as not-applicable-config for the default
Wrynose recipe configuration.
Reference:
[1] https://curl.se/docs/CVE-2026-9547.html
[2] https://git.openembedded.org/openembedded-core/tree/meta/recipes-support/curl/curl_8.19.0.bb?h=wrynose
Signed-off-by: Deepak Rathore <deeratho@cisco.com>
---
meta/recipes-support/curl/curl_8.19.0.bb | 1 +
1 file changed, 1 insertion(+)
diff --git a/meta/recipes-support/curl/curl_8.19.0.bb b/meta/recipes-support/curl/curl_8.19.0.bb
index b0edc5b960..4c3e31d438 100644
--- a/meta/recipes-support/curl/curl_8.19.0.bb
+++ b/meta/recipes-support/curl/curl_8.19.0.bb
@@ -43,6 +43,7 @@ CVE_PRODUCT = "haxx:curl haxx:libcurl curl:curl curl:libcurl libcurl:libcurl dan
CVE_STATUS[CVE-2024-32928] = "ignored: CURLOPT_SSL_VERIFYPEER was disabled on google cloud services causing a potential man in the middle attack"
CVE_STATUS[CVE-2026-8924] = "not-applicable-config: public suffix list support is disabled by the recipe with --without-libpsl"
CVE_STATUS[CVE-2026-10536] = "${@bb.utils.contains('PACKAGECONFIG', 'nghttp2', 'unpatched', 'not-applicable-config: applicable only with HTTP/2', d)}"
+CVE_STATUS[CVE-2026-9547] = "not-applicable-config: vulnerable libssh backend is not enabled by the recipe"
inherit autotools pkgconfig binconfig multilib_header ptest
--
2.35.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [OE-core][wrynose][PATCH 8/8] curl: set CVE_STATUS for CVE-2026-12064
2026-08-05 8:30 [OE-core][wrynose][PATCH 0/8] curl: Security fixes Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
` (6 preceding siblings ...)
2026-08-05 8:31 ` [OE-core][wrynose][PATCH 7/8] curl: set CVE_STATUS for CVE-2026-9547 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
@ 2026-08-05 8:31 ` Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
7 siblings, 0 replies; 9+ messages in thread
From: Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco) @ 2026-08-05 8:31 UTC (permalink / raw)
To: openembedded-core
From: Deepak Rathore <deeratho@cisco.com>
Analysis:
- CVE-2026-12064 affects the curl command-line tool when
SCP/SFTP protocol support is available. [1]
- Wrynose exposes SCP/SFTP only through the optional libssh2
PACKAGECONFIG, which is disabled by default. [2]
- Hence mark this CVE as not-applicable-config for the default
Wrynose recipe configuration, while reporting unpatched if
libssh2 is explicitly enabled.
Reference:
[1] https://curl.se/docs/CVE-2026-12064.html
[2] https://git.openembedded.org/openembedded-core/tree/meta/recipes-support/curl/curl_8.19.0.bb?h=wrynose
Signed-off-by: Deepak Rathore <deeratho@cisco.com>
---
meta/recipes-support/curl/curl_8.19.0.bb | 1 +
1 file changed, 1 insertion(+)
diff --git a/meta/recipes-support/curl/curl_8.19.0.bb b/meta/recipes-support/curl/curl_8.19.0.bb
index 4c3e31d438..1bf32ffc53 100644
--- a/meta/recipes-support/curl/curl_8.19.0.bb
+++ b/meta/recipes-support/curl/curl_8.19.0.bb
@@ -44,6 +44,7 @@ CVE_STATUS[CVE-2024-32928] = "ignored: CURLOPT_SSL_VERIFYPEER was disabled on go
CVE_STATUS[CVE-2026-8924] = "not-applicable-config: public suffix list support is disabled by the recipe with --without-libpsl"
CVE_STATUS[CVE-2026-10536] = "${@bb.utils.contains('PACKAGECONFIG', 'nghttp2', 'unpatched', 'not-applicable-config: applicable only with HTTP/2', d)}"
CVE_STATUS[CVE-2026-9547] = "not-applicable-config: vulnerable libssh backend is not enabled by the recipe"
+CVE_STATUS[CVE-2026-12064] = "${@bb.utils.contains('PACKAGECONFIG', 'libssh2', 'unpatched', 'not-applicable-config: SCP/SFTP support is not enabled in PACKAGECONFIG', d)}"
inherit autotools pkgconfig binconfig multilib_header ptest
--
2.35.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
end of thread, other threads:[~2026-08-05 8:31 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-08-05 8:30 [OE-core][wrynose][PATCH 0/8] curl: Security fixes Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:30 ` [OE-core][wrynose][PATCH 1/8] curl: fix CVE-2026-8286 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:30 ` [OE-core][wrynose][PATCH 2/8] curl: set CVE_STATUS for CVE-2026-8924 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:30 ` [OE-core][wrynose][PATCH 3/8] curl: fix CVE-2026-8927 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:30 ` [OE-core][wrynose][PATCH 4/8] curl: fix CVE-2026-8932 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:31 ` [OE-core][wrynose][PATCH 5/8] curl: fix CVE-2026-8458 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:31 ` [OE-core][wrynose][PATCH 6/8] curl: fix CVE-2026-11856 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:31 ` [OE-core][wrynose][PATCH 7/8] curl: set CVE_STATUS for CVE-2026-9547 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
2026-08-05 8:31 ` [OE-core][wrynose][PATCH 8/8] curl: set CVE_STATUS for CVE-2026-12064 Deepak Rathore -X (deeratho - E INFOCHIPS PRIVATE LIMITED at Cisco)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox