[PATCH 1/2] perl: Add option to prevent COMPLEMENTARY_GLOB from ignoring perl-modules

[PATCH 1/2] perl: Add option to prevent COMPLEMENTARY_GLOB from ignoring perl-modules

[William.Lyu]

From: William Lyu <William.Lyu@windriver.com>

When perl-modules is added via COMPLEMENTARY_GLOB, all perl-module-*
packages recommended by perl-modules are ignored due to the defined
behavior of COMPLEMENTARY_GLOB.

This patch creates a new package perl-modules-force-all that RDEPENDS on
the same set of packages perl-modules recommends. If another recipe
always needs the packages recommended by perl-modules, it can add
perl-modules-force-all to RDEPENDS to make sure that the recommended
packages by perl-modules are not ignored by COMPLEMENTARY_GLOB.

Signed-off-by: William Lyu <William.Lyu@windriver.com>
---
 meta/recipes-devtools/perl/perl_5.38.2.bb | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/meta/recipes-devtools/perl/perl_5.38.2.bb b/meta/recipes-devtools/perl/perl_5.38.2.bb
index a9d684cfc5..f75c5aa971 100644
--- a/meta/recipes-devtools/perl/perl_5.38.2.bb
+++ b/meta/recipes-devtools/perl/perl_5.38.2.bb
@@ -311,6 +311,14 @@ ALTERNATIVE_LINK_NAME[Thread.3] = "${mandir}/man3/Thread.3"
 ALLOW_EMPTY:${PN}-modules = "1"
 PACKAGES += "${PN}-modules "
 
+# When perl-modules is added through COMPLEMENTARY_GLOB, as it is recommending
+# packages, all its recommendations will be ignored. So, we create a
+# perl-modules-force-all package depending on the same set of packages as listed
+# in perl-modules to provide a way to guarantee COMPLEMENTARY_GLOB not removing
+# these packages.
+ALLOW_EMPTY:${PN}-modules-force-all = "1"
+PACKAGES += "${PN}-modules-force-all "
+
 PACKAGESPLITFUNCS =+ "split_perl_packages"
 
 python split_perl_packages () {
@@ -328,6 +336,20 @@ python split_perl_packages () {
     packages = filter(lambda p: 'perl-module-' in p, d.getVar('PACKAGES').split())
     d.setVar(d.expand("RRECOMMENDS:${PN}-modules"), ' '.join(packages))
 
+    # perl-modules-force-all provides a way to prevent COMPLEMENTARY_GLOB
+    # from removing the packages specified in perl-modules.
+    # perl-modules-force-all contains the same set of packages as perl-modules.
+    d.setVar(
+        d.expand("RDEPENDS:${PN}-modules-force-all"),
+        d.getVar(d.expand("RRECOMMENDS:${PN}-modules"))
+    )
+
+    # As perl-modules-force-all depends on all other, potentially non-existent,
+    # perl packages, we allow these packages to be empty to prevent build
+    # errors.
+    for pkg in d.getVar(d.expand("RDEPENDS:${PN}-modules-force-all")).split():
+        d.setVar(d.expand("ALLOW_EMPTY:" + pkg), "1")
+
     # Read the pre-generated dependency file, and use it to set module dependecies
     for line in open(d.expand("${WORKDIR}") + '/perl-rdepends.txt').readlines():
         splitline = line.split()
-- 
2.43.0

[PATCH 2/2] openssl: Fix ptest dependencies on perl-module-* being ignored by COMPLEMENTARY_GLOB

[William.Lyu]

From: William Lyu <William.Lyu@windriver.com>

Change the openssl-ptest RDEPENDS from perl-modules to
perl-modules-force-all which RDEPENDS on the same set of packages
perl-module-* recommended by perl-modules. So, when openssl-ptest is
added via COMPLEMENTARY_GLOB "ptest-pkgs", its dependencies on these
perl-module-* packages still get added.

Signed-off-by: William Lyu <William.Lyu@windriver.com>
---
 meta/recipes-connectivity/openssl/openssl_3.2.0.bb | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/meta/recipes-connectivity/openssl/openssl_3.2.0.bb b/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
index d041d2d214..7076bd3a7b 100644
--- a/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
+++ b/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
@@ -247,7 +247,7 @@ CONFFILES:openssl-conf = "${sysconfdir}/ssl/openssl.cnf"
 
 RRECOMMENDS:libcrypto += "openssl-conf ${PN}-ossl-module-legacy"
 RDEPENDS:${PN}-misc = "perl"
-RDEPENDS:${PN}-ptest += "openssl-bin perl perl-modules bash sed"
+RDEPENDS:${PN}-ptest += "openssl-bin perl perl-modules-force-all bash sed"
 
 RDEPENDS:${PN}-bin += "openssl-conf"
 
-- 
2.43.0

Re: [OE-core] [PATCH 2/2] openssl: Fix ptest dependencies on perl-module-* being ignored by COMPLEMENTARY_GLOB

[Alexander Kanavin]

[-- Attachment #1: Type: text/plain, Size: 1938 bytes --]

How about simple depending on specific module packages? I don’t think
OpenSSL truly needs all modules.

Alex

On Tue 16. Jan 2024 at 17.56, Lyu, William via lists.openembedded.org
<william.lyu=windriver.com@lists.openembedded.org> wrote:

> From: William Lyu <William.Lyu@windriver.com>
>
> Change the openssl-ptest RDEPENDS from perl-modules to
> perl-modules-force-all which RDEPENDS on the same set of packages
> perl-module-* recommended by perl-modules. So, when openssl-ptest is
> added via COMPLEMENTARY_GLOB "ptest-pkgs", its dependencies on these
> perl-module-* packages still get added.
>
> Signed-off-by: William Lyu <William.Lyu@windriver.com>
> ---
>  meta/recipes-connectivity/openssl/openssl_3.2.0.bb | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
> b/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
> index d041d2d214..7076bd3a7b 100644
> --- a/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
> +++ b/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
> @@ -247,7 +247,7 @@ CONFFILES:openssl-conf =
> "${sysconfdir}/ssl/openssl.cnf"
>
>  RRECOMMENDS:libcrypto += "openssl-conf ${PN}-ossl-module-legacy"
>  RDEPENDS:${PN}-misc = "perl"
> -RDEPENDS:${PN}-ptest += "openssl-bin perl perl-modules bash sed"
> +RDEPENDS:${PN}-ptest += "openssl-bin perl perl-modules-force-all bash sed"
>
>  RDEPENDS:${PN}-bin += "openssl-conf"
>
> --
> 2.43.0
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#193866):
> https://lists.openembedded.org/g/openembedded-core/message/193866
> Mute This Topic: https://lists.openembedded.org/mt/103766390/1686489
> Group Owner: openembedded-core+owner@lists.openembedded.org
> Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [
> alex.kanavin@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>
>

[-- Attachment #2: Type: text/html, Size: 3470 bytes --]

Re: [OE-core] [PATCH 1/2] perl: Add option to prevent COMPLEMENTARY_GLOB from ignoring perl-modules

[Alexander Kanavin]

[-- Attachment #1: Type: text/plain, Size: 3586 bytes --]

If this is only for fixing OpenSSL ptest, then it’s not needed perhaps,
once OpenSSL recipe is fixed?

Alex

On Tue 16. Jan 2024 at 17.56, Lyu, William via lists.openembedded.org
<william.lyu=windriver.com@lists.openembedded.org> wrote:

> From: William Lyu <William.Lyu@windriver.com>
>
> When perl-modules is added via COMPLEMENTARY_GLOB, all perl-module-*
> packages recommended by perl-modules are ignored due to the defined
> behavior of COMPLEMENTARY_GLOB.
>
> This patch creates a new package perl-modules-force-all that RDEPENDS on
> the same set of packages perl-modules recommends. If another recipe
> always needs the packages recommended by perl-modules, it can add
> perl-modules-force-all to RDEPENDS to make sure that the recommended
> packages by perl-modules are not ignored by COMPLEMENTARY_GLOB.
>
> Signed-off-by: William Lyu <William.Lyu@windriver.com>
> ---
>  meta/recipes-devtools/perl/perl_5.38.2.bb | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>
> diff --git a/meta/recipes-devtools/perl/perl_5.38.2.bb
> b/meta/recipes-devtools/perl/perl_5.38.2.bb
> index a9d684cfc5..f75c5aa971 100644
> --- a/meta/recipes-devtools/perl/perl_5.38.2.bb
> +++ b/meta/recipes-devtools/perl/perl_5.38.2.bb
> @@ -311,6 +311,14 @@ ALTERNATIVE_LINK_NAME[Thread.3] =
> "${mandir}/man3/Thread.3"
>  ALLOW_EMPTY:${PN}-modules = "1"
>  PACKAGES += "${PN}-modules "
>
> +# When perl-modules is added through COMPLEMENTARY_GLOB, as it is
> recommending
> +# packages, all its recommendations will be ignored. So, we create a
> +# perl-modules-force-all package depending on the same set of packages as
> listed
> +# in perl-modules to provide a way to guarantee COMPLEMENTARY_GLOB not
> removing
> +# these packages.
> +ALLOW_EMPTY:${PN}-modules-force-all = "1"
> +PACKAGES += "${PN}-modules-force-all "
> +
>  PACKAGESPLITFUNCS =+ "split_perl_packages"
>
>  python split_perl_packages () {
> @@ -328,6 +336,20 @@ python split_perl_packages () {
>      packages = filter(lambda p: 'perl-module-' in p,
> d.getVar('PACKAGES').split())
>      d.setVar(d.expand("RRECOMMENDS:${PN}-modules"), ' '.join(packages))
>
> +    # perl-modules-force-all provides a way to prevent COMPLEMENTARY_GLOB
> +    # from removing the packages specified in perl-modules.
> +    # perl-modules-force-all contains the same set of packages as
> perl-modules.
> +    d.setVar(
> +        d.expand("RDEPENDS:${PN}-modules-force-all"),
> +        d.getVar(d.expand("RRECOMMENDS:${PN}-modules"))
> +    )
> +
> +    # As perl-modules-force-all depends on all other, potentially
> non-existent,
> +    # perl packages, we allow these packages to be empty to prevent build
> +    # errors.
> +    for pkg in
> d.getVar(d.expand("RDEPENDS:${PN}-modules-force-all")).split():
> +        d.setVar(d.expand("ALLOW_EMPTY:" + pkg), "1")
> +
>      # Read the pre-generated dependency file, and use it to set module
> dependecies
>      for line in open(d.expand("${WORKDIR}") +
> '/perl-rdepends.txt').readlines():
>          splitline = line.split()
> --
> 2.43.0
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#193867):
> https://lists.openembedded.org/g/openembedded-core/message/193867
> Mute This Topic: https://lists.openembedded.org/mt/103766391/1686489
> Group Owner: openembedded-core+owner@lists.openembedded.org
> Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [
> alex.kanavin@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>
>

[-- Attachment #2: Type: text/html, Size: 5286 bytes --]

Re: [OE-core] [PATCH 2/2] openssl: Fix ptest dependencies on perl-module-* being ignored by COMPLEMENTARY_GLOB

[Tim Orling]

[-- Attachment #1: Type: text/plain, Size: 2452 bytes --]

On Tue, Jan 16, 2024 at 9:21 AM Alexander Kanavin <alex.kanavin@gmail.com>
wrote:

> How about simple depending on specific module packages? I don’t think
> OpenSSL truly needs all modules.
>

Agreed. I don’t see a compelling reason to add the perl-modules-force-all
complication. This will add confusion in my opinion.

Iterate the tests and add the required perl-module-* sub-packages one by
one (or by inspection if the test cases)

In almost all cases, RDEPENDS on perl-modules is a short cut and should be
avoided in favor of being explicit.


> Alex
>
> On Tue 16. Jan 2024 at 17.56, Lyu, William via lists.openembedded.org
> <william.lyu=windriver.com@lists.openembedded.org> wrote:
>
>> From: William Lyu <William.Lyu@windriver.com>
>>
>> Change the openssl-ptest RDEPENDS from perl-modules to
>> perl-modules-force-all which RDEPENDS on the same set of packages
>> perl-module-* recommended by perl-modules. So, when openssl-ptest is
>> added via COMPLEMENTARY_GLOB "ptest-pkgs", its dependencies on these
>> perl-module-* packages still get added.
>>
>> Signed-off-by: William Lyu <William.Lyu@windriver.com>
>> ---
>>  meta/recipes-connectivity/openssl/openssl_3.2.0.bb | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
>> b/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
>> index d041d2d214..7076bd3a7b 100644
>> --- a/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
>> +++ b/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
>> @@ -247,7 +247,7 @@ CONFFILES:openssl-conf =
>> "${sysconfdir}/ssl/openssl.cnf"
>>
>>  RRECOMMENDS:libcrypto += "openssl-conf ${PN}-ossl-module-legacy"
>>  RDEPENDS:${PN}-misc = "perl"
>> -RDEPENDS:${PN}-ptest += "openssl-bin perl perl-modules bash sed"
>> +RDEPENDS:${PN}-ptest += "openssl-bin perl perl-modules-force-all bash
>> sed"
>>
>>  RDEPENDS:${PN}-bin += "openssl-conf"
>>
>> --
>> 2.43.0
>>
>>
>>
>>
>>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#193868):
> https://lists.openembedded.org/g/openembedded-core/message/193868
> Mute This Topic: https://lists.openembedded.org/mt/103766390/924729
> Group Owner: openembedded-core+owner@lists.openembedded.org
> Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [
> ticotimo@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>
>

[-- Attachment #2: Type: text/html, Size: 4645 bytes --]

Re: [OE-core] [PATCH 2/2] openssl: Fix ptest dependencies on perl-module-* being ignored by COMPLEMENTARY_GLOB

[Tim Orling]

[-- Attachment #1.1: Type: text/plain, Size: 2980 bytes --]

On Tue, Jan 16, 2024 at 10:57 AM Tim Orling via lists.openembedded.org
<ticotimo=gmail.com@lists.openembedded.org> wrote:

>
>
> On Tue, Jan 16, 2024 at 9:21 AM Alexander Kanavin <alex.kanavin@gmail.com>
> wrote:
>
>> How about simple depending on specific module packages? I don’t think
>> OpenSSL truly needs all modules.
>>
>
> Agreed. I don’t see a compelling reason to add the perl-modules-force-all
> complication. This will add confusion in my opinion.
>
> Iterate the tests and add the required perl-module-* sub-packages one by
> one (or by inspection if the test cases)
>
> In almost all cases, RDEPENDS on perl-modules is a short cut and should be
> avoided in favor of being explicit.
>
> This inspired me to sweep the dust off of
https://git.yoctoproject.org/poky-contrib/log/?h=timo/perl-deps_13376

This detects (but doesn't yet know how to properly handle) the RDEPENDS for
openssl-ptest. See attached snippet of the log.

It is too greedy so some dependencies are not going to be needed.



>> Alex
>>
>> On Tue 16. Jan 2024 at 17.56, Lyu, William via lists.openembedded.org
>> <william.lyu=windriver.com@lists.openembedded.org> wrote:
>>
>>> From: William Lyu <William.Lyu@windriver.com>
>>>
>>> Change the openssl-ptest RDEPENDS from perl-modules to
>>> perl-modules-force-all which RDEPENDS on the same set of packages
>>> perl-module-* recommended by perl-modules. So, when openssl-ptest is
>>> added via COMPLEMENTARY_GLOB "ptest-pkgs", its dependencies on these
>>> perl-module-* packages still get added.
>>>
>>> Signed-off-by: William Lyu <William.Lyu@windriver.com>
>>> ---
>>>  meta/recipes-connectivity/openssl/openssl_3.2.0.bb | 2 +-
>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
>>> b/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
>>> index d041d2d214..7076bd3a7b 100644
>>> --- a/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
>>> +++ b/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
>>> @@ -247,7 +247,7 @@ CONFFILES:openssl-conf =
>>> "${sysconfdir}/ssl/openssl.cnf"
>>>
>>>  RRECOMMENDS:libcrypto += "openssl-conf ${PN}-ossl-module-legacy"
>>>  RDEPENDS:${PN}-misc = "perl"
>>> -RDEPENDS:${PN}-ptest += "openssl-bin perl perl-modules bash sed"
>>> +RDEPENDS:${PN}-ptest += "openssl-bin perl perl-modules-force-all bash
>>> sed"
>>>
>>>  RDEPENDS:${PN}-bin += "openssl-conf"
>>>
>>> --
>>> 2.43.0
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#193872):
> https://lists.openembedded.org/g/openembedded-core/message/193872
> Mute This Topic: https://lists.openembedded.org/mt/103766390/924729
> Group Owner: openembedded-core+owner@lists.openembedded.org
> Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [
> ticotimo@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>
>

[-- Attachment #1.2: Type: text/html, Size: 5722 bytes --]

[-- Attachment #2: openssl-perldeps.log --]
[-- Type: text/x-log, Size: 6653 bytes --]

DEBUG: openssl-3.2.0-r0 do_perldeps: len(unresolved_rdeps[openssl-ptest]) = 82
DEBUG: openssl-3.2.0-r0 do_perldeps: unresolved_rdeps[openssl-ptest]:
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(TLSProxy::ServerHello)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(OpenSSL::Util)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Errno)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Getopt::Std)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl >= 0:5.008
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(parent)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(FindBin)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(platform::mingw)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(List::Util)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(warnings)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(File::Basename)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(IO::Socket)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(OpenSSL::Glob)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Time::Local)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl >= 1:5.10.0
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(OpenSSL::Template)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Test::Pod) >= 1.41
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(TLSProxy::NewSessionTicket)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(File::Glob)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Carp)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Text::Diff)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Text::Template) >= 1.46
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(OpenSSL::Test::Simple)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Pod::Html)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Getopt::Long)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(File::Path) >= 2.00
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(ssltests_base)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(TLSProxy::CertificateRequest)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(platform::BASE)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(TLSProxy::Alert)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(OpenSSL::Test)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Test::More) >= 0.96
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(TLSProxy::ServerKeyExchange)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(platform)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Config)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(File::Temp)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(platform::Windows)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Data::Dumper)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(OpenSSL::fallback)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(OpenSSL::Ordinals)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Math::BigInt)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Pod::Usage)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Encode)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Cwd)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(strict)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(platform::Windows::MSVC)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(platform::Unix)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(utf8)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Exporter)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(TLSProxy::EncryptedExtensions)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(constant)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Fcntl)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(base)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(File::Copy)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(POSIX)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(checkhandshake)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(TLSProxy::Message)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Storable)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(OpenSSL::Config::Query)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(TLSProxy::CertificateVerify)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(vars)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(File::Compare)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(configdata)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(IPC::Open2)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(FileHandle)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Scalar::Util)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(OpenSSL::Test::Utils)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(MIME::Base64)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(TLSProxy::Certificate)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(gentemplate)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(lib)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Digest::SHA)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(IO::Select)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(feature)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(File::Spec::Functions)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(TLSProxy::Proxy)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(Test::Harness)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(TLSProxy::Record)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(OpenSSL::ParseC)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(IPC::Cmd)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(TLSProxy::ClientHello)
DEBUG: openssl-3.2.0-r0 do_perldeps: 	perl(File::Spec)
WARNING: openssl-3.2.0-r0 do_perldeps: [openssl-ptest] Possible missing runtime dependencies detected, but they could not be resolved "perl(TLSProxy::ServerHello) perl(OpenSSL::Util) perl(Errno) perl(Getopt::Std) perl >= 0:5.008 perl(parent) perl(FindBin) perl(platform::mingw) perl(List::Util) perl(warnings) perl(File::Basename) perl(IO::Socket) perl(OpenSSL::Glob) perl(Time::Local) perl >= 1:5.10.0 perl(OpenSSL::Template) perl(Test::Pod) >= 1.41 perl(TLSProxy::NewSessionTicket) perl(File::Glob) perl(Carp) perl(Text::Diff) perl(Text::Template) >= 1.46 perl(OpenSSL::Test::Simple) perl(Pod::Html) perl(Getopt::Long) perl(File::Path) >= 2.00 perl(ssltests_base) perl(TLSProxy::CertificateRequest) perl(platform::BASE) perl(TLSProxy::Alert) perl(OpenSSL::Test) perl(Test::More) >= 0.96 perl(TLSProxy::ServerKeyExchange) perl(platform) perl(Config) perl(File::Temp) perl(platform::Windows) perl(Data::Dumper) perl(OpenSSL::fallback) perl(OpenSSL::Ordinals) perl(Math::BigInt) perl(Pod::Usage) perl(Encode) perl(Cwd) perl(strict) perl(platform::Windows::MSVC) perl(platform::Unix) perl(utf8) perl(Exporter) perl(TLSProxy::EncryptedExtensions) perl(constant) perl(Fcntl) perl(base) perl(File::Copy) perl(POSIX) perl(checkhandshake) perl(TLSProxy::Message) perl(Storable) perl(OpenSSL::Config::Query) perl(TLSProxy::CertificateVerify) perl(vars) perl(File::Compare) perl(configdata) perl(IPC::Open2) perl(FileHandle) perl(Scalar::Util) perl(OpenSSL::Test::Utils) perl(MIME::Base64) perl(TLSProxy::Certificate) perl(gentemplate) perl(lib) perl(Digest::SHA) perl(IO::Select) perl(feature) perl(File::Spec::Functions) perl(TLSProxy::Proxy) perl(Test::Harness) perl(TLSProxy::Record) perl(OpenSSL::ParseC) perl(IPC::Cmd) perl(TLSProxy::ClientHello) perl(File::Spec)"

Re: [OE-core] [PATCH 2/2] openssl: Fix ptest dependencies on perl-module-* being ignored by COMPLEMENTARY_GLOB

[ChenQi]

[-- Attachment #1: Type: text/plain, Size: 3939 bytes --]

Can we change the perl recipe to simply use 'RDEPENDS' for perl-modules?
I don't see what benefit the 'RRECOMMENDS' could give us.

Regards,
Qi


On 1/17/24 02:56, Tim Orling wrote:
>
>
> On Tue, Jan 16, 2024 at 9:21 AM Alexander Kanavin 
> <alex.kanavin@gmail.com> wrote:
>
>     How about simple depending on specific module packages? I don’t
>     think OpenSSL truly needs all modules.
>
>
> Agreed. I don’t see a compelling reason to add the 
> perl-modules-force-all complication. This will add confusion in my 
> opinion.
>
> Iterate the tests and add the required perl-module-* sub-packages one 
> by one (or by inspection if the test cases)
>
> In almost all cases, RDEPENDS on perl-modules is a short cut and 
> should be avoided in favor of being explicit.
>
>
>     Alex
>
>     On Tue 16. Jan 2024 at 17.56, Lyu, William via
>     lists.openembedded.org
>     <https://urldefense.com/v3/__http://lists.openembedded.org__;!!AjveYdw8EvQ!cxKJn1SS8SQ9ODf0H1IfuN2qyCFPWHDlbuuYvuan7dIN9Nds2MS9DozRKwvNf7Di3p7lYRZ7IPV-BvhkVBVlxg$>
>     <william.lyu=windriver.com@lists.openembedded.org> wrote:
>
>         From: William Lyu <William.Lyu@windriver.com>
>
>         Change the openssl-ptest RDEPENDS from perl-modules to
>         perl-modules-force-all which RDEPENDS on the same set of packages
>         perl-module-* recommended by perl-modules. So, when
>         openssl-ptest is
>         added via COMPLEMENTARY_GLOB "ptest-pkgs", its dependencies on
>         these
>         perl-module-* packages still get added.
>
>         Signed-off-by: William Lyu <William.Lyu@windriver.com>
>         ---
>          meta/recipes-connectivity/openssl/openssl_3.2.0.bb
>         <https://urldefense.com/v3/__http://openssl_3.2.0.bb__;!!AjveYdw8EvQ!cxKJn1SS8SQ9ODf0H1IfuN2qyCFPWHDlbuuYvuan7dIN9Nds2MS9DozRKwvNf7Di3p7lYRZ7IPV-BvgVPdEvRA$>
>         | 2 +-
>          1 file changed, 1 insertion(+), 1 deletion(-)
>
>         diff --git
>         a/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
>         <https://urldefense.com/v3/__http://openssl_3.2.0.bb__;!!AjveYdw8EvQ!cxKJn1SS8SQ9ODf0H1IfuN2qyCFPWHDlbuuYvuan7dIN9Nds2MS9DozRKwvNf7Di3p7lYRZ7IPV-BvgVPdEvRA$>
>         b/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
>         <https://urldefense.com/v3/__http://openssl_3.2.0.bb__;!!AjveYdw8EvQ!cxKJn1SS8SQ9ODf0H1IfuN2qyCFPWHDlbuuYvuan7dIN9Nds2MS9DozRKwvNf7Di3p7lYRZ7IPV-BvgVPdEvRA$>
>         index d041d2d214..7076bd3a7b 100644
>         --- a/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
>         <https://urldefense.com/v3/__http://openssl_3.2.0.bb__;!!AjveYdw8EvQ!cxKJn1SS8SQ9ODf0H1IfuN2qyCFPWHDlbuuYvuan7dIN9Nds2MS9DozRKwvNf7Di3p7lYRZ7IPV-BvgVPdEvRA$>
>         +++ b/meta/recipes-connectivity/openssl/openssl_3.2.0.bb
>         <https://urldefense.com/v3/__http://openssl_3.2.0.bb__;!!AjveYdw8EvQ!cxKJn1SS8SQ9ODf0H1IfuN2qyCFPWHDlbuuYvuan7dIN9Nds2MS9DozRKwvNf7Di3p7lYRZ7IPV-BvgVPdEvRA$>
>         @@ -247,7 +247,7 @@ CONFFILES:openssl-conf =
>         "${sysconfdir}/ssl/openssl.cnf"
>
>          RRECOMMENDS:libcrypto += "openssl-conf ${PN}-ossl-module-legacy"
>          RDEPENDS:${PN}-misc = "perl"
>         -RDEPENDS:${PN}-ptest += "openssl-bin perl perl-modules bash sed"
>         +RDEPENDS:${PN}-ptest += "openssl-bin perl
>         perl-modules-force-all bash sed"
>
>          RDEPENDS:${PN}-bin += "openssl-conf"
>
>         -- 
>         2.43.0
>
>
>
>
>
>
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#193872):https://lists.openembedded.org/g/openembedded-core/message/193872
> Mute This Topic:https://lists.openembedded.org/mt/103766390/7304865
> Group Owner:openembedded-core+owner@lists.openembedded.org
> Unsubscribe:https://lists.openembedded.org/g/openembedded-core/unsub  [Qi.Chen@eng.windriver.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>

[-- Attachment #2: Type: text/html, Size: 8195 bytes --]

Re: [PATCH 2/2] openssl: Fix ptest dependencies on perl-module-* being ignored by COMPLEMENTARY_GLOB

[Lyu, William]

[-- Attachment #1: Type: text/plain, Size: 454 bytes --]

Qi, according to the comments in the perl_5.38.2.bb recipe, perl-modules recommends "all the other perl packages" which might include optional packages. I assume leaving optional packages as "runtime recommended" (RRECOMMENDS) - aka. soft dependencies - can reduce the possibility of conflicts. The following patch changed the package_manager to ignore RRECOMMENDS to avoid conflict:

https://lists.openembedded.org/g/openembedded-core/message/167303

[-- Attachment #2: Type: text/html, Size: 462 bytes --]

Re: [PATCH 1/2] perl: Add option to prevent COMPLEMENTARY_GLOB from ignoring perl-modules

[Lyu, William]

[-- Attachment #1: Type: text/plain, Size: 1535 bytes --]

I have iteratively added the following 45 modules, and I still not at the point of covering all perl-module-* dependencies for openssl-test. Should I continue on with this effort? Using "perl-module-force-all" is a lot more convenient without conflicting with any existing usage of "perl-modules" - even including the ones that depends on "perl-modules" having the property of being a soft dependency ("perl-modules" RRECOMMENDS all of its packages).

William

List of perl-module-* I have iteratively added up to this point:

perl-module-base
perl-module-carp
perl-module-config
perl-module-constant
perl-module-cwd
perl-module-data-dumper
perl-module-digest-sha
perl-module-encode
perl-module-errno
perl-module-exporter
perl-module-fcntl
perl-module-feature
perl-module-file-basename
perl-module-file-compare
perl-module-file-copy
perl-module-file-glob
perl-module-filehandle
perl-module-file-path
perl-module-file-spec
perl-module-file-spec-functions
perl-module-file-temp
perl-module-findbin
perl-module-getopt-long
perl-module-getopt-std
perl-module-io-select
perl-module-io-socket
perl-module-ipc-cmd
perl-module-ipc-open2
perl-module-lib
perl-module-list-util
perl-module-math-bigint
perl-module-mime-base64
perl-module-parent
perl-module-pod-html
perl-module-pod-usage
perl-module-posix
perl-module-scalar-util
perl-module-storable
perl-module-strict
perl-module-test-harness
perl-module-test-more
perl-module-time-local
perl-module-utf8
perl-module-vars
perl-module-warnings

[-- Attachment #2: Type: text/html, Size: 3317 bytes --]

Re: [OE-core] [PATCH 1/2] perl: Add option to prevent COMPLEMENTARY_GLOB from ignoring perl-modules

[Alexander Kanavin]

How are you making the list? I think this might be somewhat sped up,
if you first grep
${WORKDIR}/packages-split/openssl-ptest/usr/lib/openssl/ptest/test/
(and util/perl/OpenSSL/ as well) for "^use " and transform the output
lines into 'perl-module-something'. Then try it on the target in qemu
to see whether something is missing.

Alex

On Wed, 17 Jan 2024 at 23:44, Lyu, William via lists.openembedded.org
<william.lyu=windriver.com@lists.openembedded.org> wrote:
>
> I have iteratively added the following 45 modules, and I still not at the point of covering all perl-module-* dependencies for openssl-test. Should I continue on with this effort? Using "perl-module-force-all" is a lot more convenient without conflicting with any existing usage of "perl-modules" - even including the ones that depends on "perl-modules" having the property of being a soft dependency ("perl-modules" RRECOMMENDS all of its packages).
>
> William
>
> List of perl-module-* I have iteratively added up to this point:
>
> perl-module-base
> perl-module-carp
> perl-module-config
> perl-module-constant
> perl-module-cwd
> perl-module-data-dumper
> perl-module-digest-sha
> perl-module-encode
> perl-module-errno
> perl-module-exporter
> perl-module-fcntl
> perl-module-feature
> perl-module-file-basename
> perl-module-file-compare
> perl-module-file-copy
> perl-module-file-glob
> perl-module-filehandle
> perl-module-file-path
> perl-module-file-spec
> perl-module-file-spec-functions
> perl-module-file-temp
> perl-module-findbin
> perl-module-getopt-long
> perl-module-getopt-std
> perl-module-io-select
> perl-module-io-socket
> perl-module-ipc-cmd
> perl-module-ipc-open2
> perl-module-lib
> perl-module-list-util
> perl-module-math-bigint
> perl-module-mime-base64
> perl-module-parent
> perl-module-pod-html
> perl-module-pod-usage
> perl-module-posix
> perl-module-scalar-util
> perl-module-storable
> perl-module-strict
> perl-module-test-harness
> perl-module-test-more
> perl-module-time-local
> perl-module-utf8
> perl-module-vars
> perl-module-warnings
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#193949): https://lists.openembedded.org/g/openembedded-core/message/193949
> Mute This Topic: https://lists.openembedded.org/mt/103766391/1686489
> Group Owner: openembedded-core+owner@lists.openembedded.org
> Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [alex.kanavin@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>

Re: [PATCH 1/2] perl: Add option to prevent COMPLEMENTARY_GLOB from ignoring perl-modules

[Lyu, William]

[-- Attachment #1: Type: text/plain, Size: 5876 bytes --]

Following your suggestions and iteratively adding packages based on error message, I am finally able to come up with quite a long list of perl-module-* packages that fix the dependencies of openssl-ptest.

However, I am worried about if the list I came up with is truly comprehensive in the sense that this list covers all dependencies for other architectures and other OSes. I see that a lot of openssl-ptest subtests are marked as "skipped". I am not sure if these dependencies will be sufficient if these subtests are not skipped. Also, I am not sure if the packages I added are arch or OS specific.

The following is the list of perl-module-* I found.

This first portion is identified by following your suggestion of using grep "^\s*use".
perl-module-extutils-makemaker \
perl-module-file-find \
perl-module-if \
perl-module-pod-checker \
perl-module-tap-harness \
perl-module-tap-parser-aggregator \
perl-module-tap-parser-source \
perl-module-tap-parser-sourcehandler-perl \
perl-module-text-parsewords \
perl-module-carp \
perl-module-cwd \
perl-module-data-dumper \
perl-module-digest-sha \
perl-module-encode \
perl-module-errno \
perl-module-exporter \
perl-module-fcntl \
perl-module-feature \
perl-module-file-basename \
perl-module-file-compare \
perl-module-file-copy \
perl-module-file-glob \
perl-module-filehandle \
perl-module-file-path \
perl-module-file-spec \
perl-module-file-spec-functions \
perl-module-file-temp \
perl-module-findbin \
perl-module-getopt-long \
perl-module-getopt-std \
perl-module-io-select \
perl-module-io-socket \
perl-module-ipc-cmd \
perl-module-ipc-open2 \
perl-module-lib \
perl-module-list-util \
perl-module-math-bigint \
perl-module-mime-base64 \
perl-module-pod-html \
perl-module-posix \
perl-module-scalar-util \
perl-module-storable \
perl-module-test-harness \
perl-module-test-more \
perl-module-time-local \
perl-module-utf8 \
perl-module-vars \
\

The following are added iteratively based on error reports from actually running the test.
perl-module-pod-text \
perl-module-encode-encoding \
perl-module-metadata \
perl-module-locale \
\

The following are added due to internal dependencies between different TAP modules. I added a few iteratively, and there are still some errors. So, I just grepped and added all tap modules.
perl-module-tap-base \
perl-module-tap-formatter-base \
perl-module-tap-formatter-color \
perl-module-tap-formatter-console \
perl-module-tap-formatter-console-parallelsession \
perl-module-tap-formatter-console-session \
perl-module-tap-formatter-file \
perl-module-tap-formatter-file-session \
perl-module-tap-formatter-session \
perl-module-tap-harness \
perl-module-tap-harness-env \
perl-module-tap-object \
perl-module-tap-parser \
perl-module-tap-parser-aggregator \
perl-module-tap-parser-grammar \
perl-module-tap-parser-iterator \
perl-module-tap-parser-iterator-array \
perl-module-tap-parser-iteratorfactory \
perl-module-tap-parser-iterator-process \
perl-module-tap-parser-iterator-stream \
perl-module-tap-parser-multiplexer \
perl-module-tap-parser-result \
perl-module-tap-parser-result-bailout \
perl-module-tap-parser-result-comment \
perl-module-tap-parser-resultfactory \
perl-module-tap-parser-result-plan \
perl-module-tap-parser-result-pragma \
perl-module-tap-parser-result-test \
perl-module-tap-parser-result-unknown \
perl-module-tap-parser-result-version \
perl-module-tap-parser-result-yaml \
perl-module-tap-parser-scheduler \
perl-module-tap-parser-scheduler-job \
perl-module-tap-parser-scheduler-spinner \
perl-module-tap-parser-source \
perl-module-tap-parser-sourcehandler \
perl-module-tap-parser-sourcehandler-executable \
perl-module-tap-parser-sourcehandler-file \
perl-module-tap-parser-sourcehandler-handle \
perl-module-tap-parser-sourcehandler-perl \
perl-module-tap-parser-sourcehandler-rawtap \
perl-module-tap-parser-yamlish-reader \
perl-module-tap-parser-yamlish-writer \
\

Only perl-module-extutils-mm-unix was requested. However, I noticed that the suffix has "unix", so I assumed that this module is OS dependant. In case openssl-ptest needs to be built for other OSes, I added all perl-module-extutils-mm*.
perl-module-extutils-mm \
perl-module-extutils-mm-aix \
perl-module-extutils-mm-any \
perl-module-extutils-mm-beos \
perl-module-extutils-mm-cygwin \
perl-module-extutils-mm-darwin \
perl-module-extutils-mm-dos \
perl-module-extutils-mm-macos \
perl-module-extutils-mm-nw5 \
perl-module-extutils-mm-os2 \
perl-module-extutils-mm-os390 \
perl-module-extutils-mm-qnx \
perl-module-extutils-mm-unix \
perl-module-extutils-mm-uwin \
perl-module-extutils-mm-vms \
perl-module-extutils-mm-vos \
perl-module-extutils-mm-win32 \
perl-module-extutils-mm-win95 \

===== APPENDIX: Commands I Used to Identify the Potential List of Packages Needed =====
These are details and can be ignored.

Under "{build directory}/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/rootfs/usr/lib/openssl/ptest", I executed the following command to convert all imported modules using "use" statements into "perl-module-*":
$ grep -r -n -I "^\s*use " | sed -E 's/.*:[0-9]+://' | sed -E 's/;/\n/g' | sed -E 's/^ *use *//' | sed -E 's/ /\n/g' | awk '!/^\s*$/' | tr '[:upper:]' '[:lower:]' | sed -E 's/::/-/g' | sed -E 's/^/perl-module-/' | sort | uniq

I saved the above list into a file "PARSED_USE". Then, I listed all directories under "tmp/work/core2-64-poky-linux/perl/5.38.2/packages-split" and saved this list as a list of valid perl-module-* into a file "VALID_MODULE".

I used the following command to determine which line in file "PARSED_USE" is a valid perl-module-* based on "VALID_MODULE" using the following command:
$ cat PARSED_USE VALID_MODULE | sort | uniq -c | sort -nk1,1 | grep -E '^ *2'

[-- Attachment #2: Type: text/html, Size: 8931 bytes --]

Re: [OE-core] [PATCH 1/2] perl: Add option to prevent COMPLEMENTARY_GLOB from ignoring perl-modules

[Alexander Kanavin]

Thank you for doing this deep level investigation. I think this pretty
much shows that listing all modules in a way that can be maintained
isn't feasible (the idea was that maybe there's only a few of them
needed for ptest).

Which brings us back to the question: why is perl-modules using
RRECOMMENDS and not RDEPENDS? I went through git history, and perl
recipe had RRECOMMENDS from the very first mass-import commit in 2005,
so the answer is likely no one knows or remembers.

I also went and checked python: in there python3-modules is using RDEPENDS.

So I think the easiest way out is to simply replace RRECOMMENDS with
RDEPENDS in perl as well. Can you make a patch?

Alex

On Fri, 19 Jan 2024 at 19:11, Lyu, William via lists.openembedded.org
<william.lyu=windriver.com@lists.openembedded.org> wrote:
>
> Following your suggestions and iteratively adding packages based on error message, I am finally able to come up with quite a long list of perl-module-* packages that fix the dependencies of openssl-ptest.
>
>
> However, I am worried about if the list I came up with is truly comprehensive in the sense that this list covers all dependencies for other architectures and other OSes. I see that a lot of openssl-ptest subtests are marked as "skipped". I am not sure if these dependencies will be sufficient if these subtests are not skipped. Also, I am not sure if the packages I added are arch or OS specific.
>
> The following is the list of perl-module-* I found.
>
> This first portion is identified by following your suggestion of using grep "^\s*use".
>     perl-module-extutils-makemaker \
>     perl-module-file-find \
>     perl-module-if \
>     perl-module-pod-checker \
>     perl-module-tap-harness \
>     perl-module-tap-parser-aggregator \
>     perl-module-tap-parser-source \
>     perl-module-tap-parser-sourcehandler-perl \
>     perl-module-text-parsewords \
>     perl-module-carp \
>     perl-module-cwd \
>     perl-module-data-dumper \
>     perl-module-digest-sha \
>     perl-module-encode \
>     perl-module-errno \
>     perl-module-exporter \
>     perl-module-fcntl \
>     perl-module-feature \
>     perl-module-file-basename \
>     perl-module-file-compare \
>     perl-module-file-copy \
>     perl-module-file-glob \
>     perl-module-filehandle \
>     perl-module-file-path \
>     perl-module-file-spec \
>     perl-module-file-spec-functions \
>     perl-module-file-temp \
>     perl-module-findbin \
>     perl-module-getopt-long \
>     perl-module-getopt-std \
>     perl-module-io-select \
>     perl-module-io-socket \
>     perl-module-ipc-cmd \
>     perl-module-ipc-open2 \
>     perl-module-lib \
>     perl-module-list-util \
>     perl-module-math-bigint \
>     perl-module-mime-base64 \
>     perl-module-pod-html \
>     perl-module-posix \
>     perl-module-scalar-util \
>     perl-module-storable \
>     perl-module-test-harness \
>     perl-module-test-more \
>     perl-module-time-local \
>     perl-module-utf8 \
>     perl-module-vars \
>     \
>
> The following are added iteratively based on error reports from actually running the test.
>     perl-module-pod-text \
>     perl-module-encode-encoding \
>     perl-module-metadata \
>     perl-module-locale \
>     \
>
> The following are added due to internal dependencies between different TAP modules. I added a few iteratively, and there are still some errors. So, I just grepped and added all tap modules.
>     perl-module-tap-base \
>     perl-module-tap-formatter-base \
>     perl-module-tap-formatter-color \
>     perl-module-tap-formatter-console \
>     perl-module-tap-formatter-console-parallelsession \
>     perl-module-tap-formatter-console-session \
>     perl-module-tap-formatter-file \
>     perl-module-tap-formatter-file-session \
>     perl-module-tap-formatter-session \
>     perl-module-tap-harness \
>     perl-module-tap-harness-env \
>     perl-module-tap-object \
>     perl-module-tap-parser \
>     perl-module-tap-parser-aggregator \
>     perl-module-tap-parser-grammar \
>     perl-module-tap-parser-iterator \
>     perl-module-tap-parser-iterator-array \
>     perl-module-tap-parser-iteratorfactory \
>     perl-module-tap-parser-iterator-process \
>     perl-module-tap-parser-iterator-stream \
>     perl-module-tap-parser-multiplexer \
>     perl-module-tap-parser-result \
>     perl-module-tap-parser-result-bailout \
>     perl-module-tap-parser-result-comment \
>     perl-module-tap-parser-resultfactory \
>     perl-module-tap-parser-result-plan \
>     perl-module-tap-parser-result-pragma \
>     perl-module-tap-parser-result-test \
>     perl-module-tap-parser-result-unknown \
>     perl-module-tap-parser-result-version \
>     perl-module-tap-parser-result-yaml \
>     perl-module-tap-parser-scheduler \
>     perl-module-tap-parser-scheduler-job \
>     perl-module-tap-parser-scheduler-spinner \
>     perl-module-tap-parser-source \
>     perl-module-tap-parser-sourcehandler \
>     perl-module-tap-parser-sourcehandler-executable \
>     perl-module-tap-parser-sourcehandler-file \
>     perl-module-tap-parser-sourcehandler-handle \
>     perl-module-tap-parser-sourcehandler-perl \
>     perl-module-tap-parser-sourcehandler-rawtap \
>     perl-module-tap-parser-yamlish-reader \
>     perl-module-tap-parser-yamlish-writer \
>     \
>
> Only perl-module-extutils-mm-unix was requested. However, I noticed that the suffix has "unix", so I assumed that this module is OS dependant. In case openssl-ptest needs to be built for other OSes, I added all perl-module-extutils-mm*.
>     perl-module-extutils-mm \
>     perl-module-extutils-mm-aix \
>     perl-module-extutils-mm-any \
>     perl-module-extutils-mm-beos \
>     perl-module-extutils-mm-cygwin \
>     perl-module-extutils-mm-darwin \
>     perl-module-extutils-mm-dos \
>     perl-module-extutils-mm-macos \
>     perl-module-extutils-mm-nw5 \
>     perl-module-extutils-mm-os2 \
>     perl-module-extutils-mm-os390 \
>     perl-module-extutils-mm-qnx \
>     perl-module-extutils-mm-unix \
>     perl-module-extutils-mm-uwin \
>     perl-module-extutils-mm-vms \
>     perl-module-extutils-mm-vos \
>     perl-module-extutils-mm-win32 \
>     perl-module-extutils-mm-win95 \
>
> ===== APPENDIX: Commands I Used to Identify the Potential List of Packages Needed =====
> These are details and can be ignored.
>
> Under "{build directory}/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/rootfs/usr/lib/openssl/ptest", I executed the following command to convert all imported modules using "use" statements into "perl-module-*":
> $ grep -r -n -I "^\s*use " | sed -E 's/.*:[0-9]+://' | sed -E 's/;/\n/g' | sed -E 's/^ *use *//' | sed -E 's/ /\n/g' | awk '!/^\s*$/' | tr '[:upper:]' '[:lower:]' | sed -E 's/::/-/g' | sed -E 's/^/perl-module-/' | sort | uniq
>
> I saved the above list into a file "PARSED_USE". Then, I listed all directories under "tmp/work/core2-64-poky-linux/perl/5.38.2/packages-split" and saved this list as a list of valid perl-module-* into a file "VALID_MODULE".
>
> I used the following command to determine which line in file "PARSED_USE" is a valid perl-module-* based on "VALID_MODULE" using the following command:
> $ cat PARSED_USE VALID_MODULE | sort | uniq -c | sort -nk1,1 | grep -E '^ *2'
>
>
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#194062): https://lists.openembedded.org/g/openembedded-core/message/194062
> Mute This Topic: https://lists.openembedded.org/mt/103766391/1686489
> Group Owner: openembedded-core+owner@lists.openembedded.org
> Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [alex.kanavin@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>