* Re: [poky] [PATCH] Control over when package init scripts are run
[not found] <4D9F2423.7060900@mlbassoc.com>
@ 2011-04-08 15:39 ` Koen Kooi
2011-04-08 16:08 ` Gary Thomas
0 siblings, 1 reply; 2+ messages in thread
From: Koen Kooi @ 2011-04-08 15:39 UTC (permalink / raw)
To: openembedded-core oe-core layer
Something like this would be better:
http://cgit.openembedded.org/cgit.cgi/openembedded/commit/?id=e124d03f532aad2ee22c60fda6824a8a1f2ef88f
Op 8 apr 2011, om 17:05 heeft Gary Thomas het volgende geschreven:
> The script /etc/rcS.d/S98configure is run on the first boot only
> to process any postponed package post-install scripts. The default
> position of this (98 == last) can be wrong, so let the distribution
> set this (just a matter of ?= assignment). This patch also removes
> some slugos stuff and extends the flexibility to systems which use
> RPM packaging as well.
>
> Tested on my PowerPC router, running as S00configure - works a treat.
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
> <0001-Allow-target-distribution-to-specify-when-to-run-pac.patch>_______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [poky] [PATCH] Control over when package init scripts are run
2011-04-08 15:39 ` [poky] [PATCH] Control over when package init scripts are run Koen Kooi
@ 2011-04-08 16:08 ` Gary Thomas
0 siblings, 0 replies; 2+ messages in thread
From: Gary Thomas @ 2011-04-08 16:08 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer; +Cc: Koen Kooi, Poky Project
On 04/08/2011 09:39 AM, Koen Kooi wrote:
> Something like this would be better:
>
> http://cgit.openembedded.org/cgit.cgi/openembedded/commit/?id=e124d03f532aad2ee22c60fda6824a8a1f2ef88f
Possibly, except for the fact that I posted this to the Poky list which
have different recipes (the one mentioned above does not apply)
> Op 8 apr 2011, om 17:05 heeft Gary Thomas het volgende geschreven:
>
>> The script /etc/rcS.d/S98configure is run on the first boot only
>> to process any postponed package post-install scripts. The default
>> position of this (98 == last) can be wrong, so let the distribution
>> set this (just a matter of ?= assignment). This patch also removes
>> some slugos stuff and extends the flexibility to systems which use
>> RPM packaging as well.
>>
>> Tested on my PowerPC router, running as S00configure - works a treat.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-04-08 16:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <4D9F2423.7060900@mlbassoc.com>
2011-04-08 15:39 ` [poky] [PATCH] Control over when package init scripts are run Koen Kooi
2011-04-08 16:08 ` Gary Thomas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox