* [PATCH 3/6] libiconv: Fix build failure on 1.13.1
2011-07-21 6:10 [PATCH 1/6] mesa-xlib, mesa-dri: Probe for newlocale() before using it Khem Raj
2011-07-21 6:10 ` [PATCH 2/6] task-core-tools.bb: Exclude lttng-ust for x86_64/uclibc Khem Raj
@ 2011-07-21 6:10 ` Khem Raj
2011-07-21 8:12 ` Henning Heinold
2011-07-21 6:10 ` [PATCH 4/6] uclibc: Add patch header for sync_file_range2.patch Khem Raj
` (3 subsequent siblings)
5 siblings, 1 reply; 9+ messages in thread
From: Khem Raj @ 2011-07-21 6:10 UTC (permalink / raw)
To: openembedded-core
It needs a different patch for 1.13.1 for autoconf'ing
Rename files to libiconv-1.11.1 and have a separate
directory for libiconv-1.13.1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
---
.../{files => libiconv-1.11.1}/autoconf.patch | 0
.../shared_preloadable_libiconv_linux.patch | 0
.../libiconv/libiconv-1.13.1/autoconf.patch |16026 ++++++++++++++++++++
meta/recipes-support/libiconv/libiconv_1.13.1.bb | 1 -
4 files changed, 16026 insertions(+), 1 deletions(-)
rename meta/recipes-support/libiconv/{files => libiconv-1.11.1}/autoconf.patch (100%)
rename meta/recipes-support/libiconv/{files => libiconv-1.11.1}/shared_preloadable_libiconv_linux.patch (100%)
create mode 100644 meta/recipes-support/libiconv/libiconv-1.13.1/autoconf.patch
diff --git a/meta/recipes-support/libiconv/files/autoconf.patch b/meta/recipes-support/libiconv/libiconv-1.11.1/autoconf.patch
similarity index 100%
rename from meta/recipes-support/libiconv/files/autoconf.patch
rename to meta/recipes-support/libiconv/libiconv-1.11.1/autoconf.patch
diff --git a/meta/recipes-support/libiconv/files/shared_preloadable_libiconv_linux.patch b/meta/recipes-support/libiconv/libiconv-1.11.1/shared_preloadable_libiconv_linux.patch
similarity index 100%
rename from meta/recipes-support/libiconv/files/shared_preloadable_libiconv_linux.patch
rename to meta/recipes-support/libiconv/libiconv-1.11.1/shared_preloadable_libiconv_linux.patch
diff --git a/meta/recipes-support/libiconv/libiconv-1.13.1/autoconf.patch b/meta/recipes-support/libiconv/libiconv-1.13.1/autoconf.patch
new file mode 100644
index 0000000..4336d41
--- /dev/null
+++ b/meta/recipes-support/libiconv/libiconv-1.13.1/autoconf.patch
@@ -0,0 +1,16026 @@
+It adds the variables that are needed
+for autoconf 2.65 to reconfigure libiconv and delete the m4 macros
+directory. Its imported from OE.
+
+Upstream-Status: Pending
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+
+Index: libiconv-1.13.1/configure.ac
+===================================================================
+--- libiconv-1.13.1.orig/configure.ac
++++ libiconv-1.13.1/configure.ac
+@@ -23,7 +23,7 @@ AC_CONFIG_AUX_DIR([build-aux])
+ AM_INIT_AUTOMAKE([libiconv], [1.13.1])
+ AC_CONFIG_HEADERS([config.h lib/config.h])
+ AC_PROG_MAKE_SET
+-
++AC_CONFIG_MACRO_DIR([m4])
+ dnl checks for basic programs
+
+ AC_PROG_CC
+Index: libiconv-1.13.1/libcharset/configure.ac
+===================================================================
+--- libiconv-1.13.1.orig/libcharset/configure.ac
++++ libiconv-1.13.1/libcharset/configure.ac
+@@ -16,17 +16,17 @@ dnl along with the GNU CHARSET Library;
+ dnl write to the Free Software Foundation, Inc., 51 Franklin Street,
+ dnl Fifth Floor, Boston, MA 02110-1301, USA.
+
+-AC_PREREQ([2.13])
++AC_PREREQ(2.61)
++AC_INIT([libcharset],[1.4] )
++AC_CONFIG_SRCDIR([lib/localcharset.c])
+
+-PACKAGE=libcharset
+-VERSION=1.4
+-
+-AC_INIT([lib/localcharset.c])
+ AC_CONFIG_AUX_DIR([build-aux])
+ AC_CONFIG_HEADER([config.h])
+ AC_PROG_MAKE_SET
+-AC_SUBST([PACKAGE])
+-AC_SUBST([VERSION])
++dnl AC_SUBST(PACKAGE)
++dnl AC_SUBST(VERSION)
++
++AC_CONFIG_MACRO_DIR([m4])
+
+ dnl checks for basic programs
+
+Index: libiconv-1.13.1/libcharset/m4/libtool.m4
+===================================================================
+--- libiconv-1.13.1.orig/libcharset/m4/libtool.m4
++++ /dev/null
+@@ -1,7357 +0,0 @@
+-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+-#
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008 Free Software Foundation, Inc.
+-# Written by Gordon Matzigkeit, 1996
+-#
+-# This file is free software; the Free Software Foundation gives
+-# unlimited permission to copy and/or distribute it, with or without
+-# modifications, as long as this notice is preserved.
+-
+-m4_define([_LT_COPYING], [dnl
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008 Free Software Foundation, Inc.
+-# Written by Gordon Matzigkeit, 1996
+-#
+-# This file is part of GNU Libtool.
+-#
+-# GNU Libtool is free software; you can redistribute it and/or
+-# modify it under the terms of the GNU General Public License as
+-# published by the Free Software Foundation; either version 2 of
+-# the License, or (at your option) any later version.
+-#
+-# As a special exception to the GNU General Public License,
+-# if you distribute this file as part of a program or library that
+-# is built using GNU Libtool, you may include this file under the
+-# same distribution terms that you use for the rest of that program.
+-#
+-# GNU Libtool is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-#
+-# You should have received a copy of the GNU General Public License
+-# along with GNU Libtool; see the file COPYING. If not, a copy
+-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+-# obtained by writing to the Free Software Foundation, Inc.,
+-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+-])
+-
+-# serial 56 LT_INIT
+-
+-
+-# LT_PREREQ(VERSION)
+-# ------------------
+-# Complain and exit if this libtool version is less that VERSION.
+-m4_defun([LT_PREREQ],
+-[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+- [m4_default([$3],
+- [m4_fatal([Libtool version $1 or higher is required],
+- 63)])],
+- [$2])])
+-
+-
+-# _LT_CHECK_BUILDDIR
+-# ------------------
+-# Complain if the absolute build directory name contains unusual characters
+-m4_defun([_LT_CHECK_BUILDDIR],
+-[case `pwd` in
+- *\ * | *\ *)
+- AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+-esac
+-])
+-
+-
+-# LT_INIT([OPTIONS])
+-# ------------------
+-AC_DEFUN([LT_INIT],
+-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+-AC_BEFORE([$0], [LT_LANG])dnl
+-AC_BEFORE([$0], [LT_OUTPUT])dnl
+-AC_BEFORE([$0], [LTDL_INIT])dnl
+-m4_require([_LT_CHECK_BUILDDIR])dnl
+-
+-dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+-m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+-m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+-dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+-dnl unless we require an AC_DEFUNed macro:
+-AC_REQUIRE([LTOPTIONS_VERSION])dnl
+-AC_REQUIRE([LTSUGAR_VERSION])dnl
+-AC_REQUIRE([LTVERSION_VERSION])dnl
+-AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+-m4_require([_LT_PROG_LTMAIN])dnl
+-
+-dnl Parse OPTIONS
+-_LT_SET_OPTIONS([$0], [$1])
+-
+-# This can be used to rebuild libtool when needed
+-LIBTOOL_DEPS="$ltmain"
+-
+-# Always use our own libtool.
+-LIBTOOL="${CONFIG_SHELL-$SHELL} "'$(top_builddir)/libtool'
+-AC_SUBST(LIBTOOL)dnl
+-
+-_LT_SETUP
+-
+-# Only expand once:
+-m4_define([LT_INIT])
+-])# LT_INIT
+-
+-# Old names:
+-AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+-AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+-dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+-
+-
+-# _LT_CC_BASENAME(CC)
+-# -------------------
+-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+-m4_defun([_LT_CC_BASENAME],
+-[for cc_temp in $1""; do
+- case $cc_temp in
+- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+- \-*) ;;
+- *) break;;
+- esac
+-done
+-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+-])
+-
+-
+-# _LT_FILEUTILS_DEFAULTS
+-# ----------------------
+-# It is okay to use these file commands and assume they have been set
+-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+-m4_defun([_LT_FILEUTILS_DEFAULTS],
+-[: ${CP="cp -f"}
+-: ${MV="mv -f"}
+-: ${RM="rm -f"}
+-])# _LT_FILEUTILS_DEFAULTS
+-
+-
+-# _LT_SETUP
+-# ---------
+-m4_defun([_LT_SETUP],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+-_LT_DECL([], [host_alias], [0], [The host system])dnl
+-_LT_DECL([], [host], [0])dnl
+-_LT_DECL([], [host_os], [0])dnl
+-dnl
+-_LT_DECL([], [build_alias], [0], [The build system])dnl
+-_LT_DECL([], [build], [0])dnl
+-_LT_DECL([], [build_os], [0])dnl
+-dnl
+-AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([LT_PATH_LD])dnl
+-AC_REQUIRE([LT_PATH_NM])dnl
+-dnl
+-AC_REQUIRE([AC_PROG_LN_S])dnl
+-test -z "$LN_S" && LN_S="ln -s"
+-_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+-dnl
+-AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+-_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+-_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+-dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+-m4_require([_LT_CMD_RELOAD])dnl
+-m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+-m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+-
+-_LT_CONFIG_LIBTOOL_INIT([
+-# See if we are running on zsh, and set the options which allow our
+-# commands through without removal of \ escapes INIT.
+-if test -n "\${ZSH_VERSION+set}" ; then
+- setopt NO_GLOB_SUBST
+-fi
+-])
+-if test -n "${ZSH_VERSION+set}" ; then
+- setopt NO_GLOB_SUBST
+-fi
+-
+-_LT_CHECK_OBJDIR
+-
+-m4_require([_LT_TAG_COMPILER])dnl
+-_LT_PROG_ECHO_BACKSLASH
+-
+-case $host_os in
+-aix3*)
+- # AIX sometimes has problems with the GCC collect2 program. For some
+- # reason, if we set the COLLECT_NAMES environment variable, the problems
+- # vanish in a puff of smoke.
+- if test "X${COLLECT_NAMES+set}" != Xset; then
+- COLLECT_NAMES=
+- export COLLECT_NAMES
+- fi
+- ;;
+-esac
+-
+-# Sed substitution that helps us do robust quoting. It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+-
+-# Same as above, but do not quote variable references.
+-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+-
+-# Sed substitution to delay expansion of an escaped shell variable in a
+-# double_quote_subst'ed string.
+-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+-
+-# Sed substitution to delay expansion of an escaped single quote.
+-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+-
+-# Sed substitution to avoid accidental globbing in evaled expressions
+-no_glob_subst='s/\*/\\\*/g'
+-
+-# Global variables:
+-ofile=libtool
+-can_build_shared=yes
+-
+-# All known linkers require a `.a' archive for static linking (except MSVC,
+-# which needs '.lib').
+-libext=a
+-
+-with_gnu_ld="$lt_cv_prog_gnu_ld"
+-
+-old_CC="$CC"
+-old_CFLAGS="$CFLAGS"
+-
+-# Set sane defaults for various variables
+-test -z "$CC" && CC=cc
+-test -z "$LTCC" && LTCC=$CC
+-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+-test -z "$LD" && LD=ld
+-test -z "$ac_objext" && ac_objext=o
+-
+-_LT_CC_BASENAME([$compiler])
+-
+-# Only perform the check for file, if the check method requires it
+-test -z "$MAGIC_CMD" && MAGIC_CMD=file
+-case $deplibs_check_method in
+-file_magic*)
+- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+- _LT_PATH_MAGIC
+- fi
+- ;;
+-esac
+-
+-# Use C for the default configuration in the libtool script
+-LT_SUPPORTED_TAG([CC])
+-_LT_LANG_C_CONFIG
+-_LT_LANG_DEFAULT_CONFIG
+-_LT_CONFIG_COMMANDS
+-])# _LT_SETUP
+-
+-
+-# _LT_PROG_LTMAIN
+-# ---------------
+-# Note that this code is called both from `configure', and `config.status'
+-# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+-# `config.status' has no value for ac_aux_dir unless we are using Automake,
+-# so we pass a copy along to make sure it has a sensible value anyway.
+-m4_defun([_LT_PROG_LTMAIN],
+-[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+-_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+-ltmain="$ac_aux_dir/ltmain.sh"
+-])# _LT_PROG_LTMAIN
+-
+-
+-## ------------------------------------- ##
+-## Accumulate code for creating libtool. ##
+-## ------------------------------------- ##
+-
+-# So that we can recreate a full libtool script including additional
+-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+-# in macros and then make a single call at the end using the `libtool'
+-# label.
+-
+-
+-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+-# ----------------------------------------
+-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+-m4_define([_LT_CONFIG_LIBTOOL_INIT],
+-[m4_ifval([$1],
+- [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+- [$1
+-])])])
+-
+-# Initialize.
+-m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+-
+-
+-# _LT_CONFIG_LIBTOOL([COMMANDS])
+-# ------------------------------
+-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+-m4_define([_LT_CONFIG_LIBTOOL],
+-[m4_ifval([$1],
+- [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+- [$1
+-])])])
+-
+-# Initialize.
+-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+-
+-
+-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+-# -----------------------------------------------------
+-m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+-[_LT_CONFIG_LIBTOOL([$1])
+-_LT_CONFIG_LIBTOOL_INIT([$2])
+-])
+-
+-
+-# _LT_FORMAT_COMMENT([COMMENT])
+-# -----------------------------
+-# Add leading comment marks to the start of each line, and a trailing
+-# full-stop to the whole comment if one is not present already.
+-m4_define([_LT_FORMAT_COMMENT],
+-[m4_ifval([$1], [
+-m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+- [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+-)])
+-
+-
+-
+-## ------------------------ ##
+-## FIXME: Eliminate VARNAME ##
+-## ------------------------ ##
+-
+-
+-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+-# -------------------------------------------------------------------
+-# CONFIGNAME is the name given to the value in the libtool script.
+-# VARNAME is the (base) name used in the configure script.
+-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+-# VARNAME. Any other value will be used directly.
+-m4_define([_LT_DECL],
+-[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+- [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+- [m4_ifval([$1], [$1], [$2])])
+- lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+- m4_ifval([$4],
+- [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+- lt_dict_add_subkey([lt_decl_dict], [$2],
+- [tagged?], [m4_ifval([$5], [yes], [no])])])
+-])
+-
+-
+-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+-# --------------------------------------------------------
+-m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+-
+-
+-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+-# ------------------------------------------------
+-m4_define([lt_decl_tag_varnames],
+-[_lt_decl_filter([tagged?], [yes], $@)])
+-
+-
+-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+-# ---------------------------------------------------------
+-m4_define([_lt_decl_filter],
+-[m4_case([$#],
+- [0], [m4_fatal([$0: too few arguments: $#])],
+- [1], [m4_fatal([$0: too few arguments: $#: $1])],
+- [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+- [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+- [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+-])
+-
+-
+-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+-# --------------------------------------------------
+-m4_define([lt_decl_quote_varnames],
+-[_lt_decl_filter([value], [1], $@)])
+-
+-
+-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+-# ---------------------------------------------------
+-m4_define([lt_decl_dquote_varnames],
+-[_lt_decl_filter([value], [2], $@)])
+-
+-
+-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+-# ---------------------------------------------------
+-m4_define([lt_decl_varnames_tagged],
+-[m4_assert([$# <= 2])dnl
+-_$0(m4_quote(m4_default([$1], [[, ]])),
+- m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+- m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+-m4_define([_lt_decl_varnames_tagged],
+-[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+-
+-
+-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+-# ------------------------------------------------
+-m4_define([lt_decl_all_varnames],
+-[_$0(m4_quote(m4_default([$1], [[, ]])),
+- m4_if([$2], [],
+- m4_quote(lt_decl_varnames),
+- m4_quote(m4_shift($@))))[]dnl
+-])
+-m4_define([_lt_decl_all_varnames],
+-[lt_join($@, lt_decl_varnames_tagged([$1],
+- lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+-])
+-
+-
+-# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+-# ------------------------------------
+-# Quote a variable value, and forward it to `config.status' so that its
+-# declaration there will have the same value as in `configure'. VARNAME
+-# must have a single quote delimited value for this to work.
+-m4_define([_LT_CONFIG_STATUS_DECLARE],
+-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+-
+-
+-# _LT_CONFIG_STATUS_DECLARATIONS
+-# ------------------------------
+-# We delimit libtool config variables with single quotes, so when
+-# we write them to config.status, we have to be sure to quote all
+-# embedded single quotes properly. In configure, this macro expands
+-# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+-#
+-# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+-m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+-[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+- [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+-
+-
+-# _LT_LIBTOOL_TAGS
+-# ----------------
+-# Output comment and list of tags supported by the script
+-m4_defun([_LT_LIBTOOL_TAGS],
+-[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+-available_tags="_LT_TAGS"dnl
+-])
+-
+-
+-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+-# -----------------------------------
+-# Extract the dictionary values for VARNAME (optionally with TAG) and
+-# expand to a commented shell variable setting:
+-#
+-# # Some comment about what VAR is for.
+-# visible_name=$lt_internal_name
+-m4_define([_LT_LIBTOOL_DECLARE],
+-[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+- [description])))[]dnl
+-m4_pushdef([_libtool_name],
+- m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+-m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+- [0], [_libtool_name=[$]$1],
+- [1], [_libtool_name=$lt_[]$1],
+- [2], [_libtool_name=$lt_[]$1],
+- [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+-m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+-])
+-
+-
+-# _LT_LIBTOOL_CONFIG_VARS
+-# -----------------------
+-# Produce commented declarations of non-tagged libtool config variables
+-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+-# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+-# section) are produced by _LT_LIBTOOL_TAG_VARS.
+-m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+-[m4_foreach([_lt_var],
+- m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+- [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+-
+-
+-# _LT_LIBTOOL_TAG_VARS(TAG)
+-# -------------------------
+-m4_define([_LT_LIBTOOL_TAG_VARS],
+-[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+- [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+-
+-
+-# _LT_TAGVAR(VARNAME, [TAGNAME])
+-# ------------------------------
+-m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+-
+-
+-# _LT_CONFIG_COMMANDS
+-# -------------------
+-# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+-# variables for single and double quote escaping we saved from calls
+-# to _LT_DECL, we can put quote escaped variables declarations
+-# into `config.status', and then the shell code to quote escape them in
+-# for loops in `config.status'. Finally, any additional code accumulated
+-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+-m4_defun([_LT_CONFIG_COMMANDS],
+-[AC_PROVIDE_IFELSE([LT_OUTPUT],
+- dnl If the libtool generation code has been placed in $CONFIG_LT,
+- dnl instead of duplicating it all over again into config.status,
+- dnl then we will have config.status run $CONFIG_LT later, so it
+- dnl needs to know what name is stored there:
+- [AC_CONFIG_COMMANDS([libtool],
+- [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+- dnl If the libtool generation code is destined for config.status,
+- dnl expand the accumulated commands and init code now:
+- [AC_CONFIG_COMMANDS([libtool],
+- [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+-])#_LT_CONFIG_COMMANDS
+-
+-
+-# Initialize.
+-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+-[
+-
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+-
+-sed_quote_subst='$sed_quote_subst'
+-double_quote_subst='$double_quote_subst'
+-delay_variable_subst='$delay_variable_subst'
+-_LT_CONFIG_STATUS_DECLARATIONS
+-LTCC='$LTCC'
+-LTCFLAGS='$LTCFLAGS'
+-compiler='$compiler_DEFAULT'
+-
+-# Quote evaled strings.
+-for var in lt_decl_all_varnames([[ \
+-]], lt_decl_quote_varnames); do
+- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+- *[[\\\\\\\`\\"\\\$]]*)
+- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+- ;;
+- *)
+- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+- ;;
+- esac
+-done
+-
+-# Double-quote double-evaled strings.
+-for var in lt_decl_all_varnames([[ \
+-]], lt_decl_dquote_varnames); do
+- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+- *[[\\\\\\\`\\"\\\$]]*)
+- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+- ;;
+- *)
+- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+- ;;
+- esac
+-done
+-
+-# Fix-up fallback echo if it was mangled by the above quoting rules.
+-case \$lt_ECHO in
+-*'\\\[$]0 --fallback-echo"')dnl "
+- lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+- ;;
+-esac
+-
+-_LT_OUTPUT_LIBTOOL_INIT
+-])
+-
+-
+-# LT_OUTPUT
+-# ---------
+-# This macro allows early generation of the libtool script (before
+-# AC_OUTPUT is called), incase it is used in configure for compilation
+-# tests.
+-AC_DEFUN([LT_OUTPUT],
+-[: ${CONFIG_LT=./config.lt}
+-AC_MSG_NOTICE([creating $CONFIG_LT])
+-cat >"$CONFIG_LT" <<_LTEOF
+-#! $SHELL
+-# Generated by $as_me.
+-# Run this file to recreate a libtool stub with the current configuration.
+-
+-lt_cl_silent=false
+-SHELL=\${CONFIG_SHELL-$SHELL}
+-_LTEOF
+-
+-cat >>"$CONFIG_LT" <<\_LTEOF
+-AS_SHELL_SANITIZE
+-_AS_PREPARE
+-
+-exec AS_MESSAGE_FD>&1
+-exec AS_MESSAGE_LOG_FD>>config.log
+-{
+- echo
+- AS_BOX([Running $as_me.])
+-} >&AS_MESSAGE_LOG_FD
+-
+-lt_cl_help="\
+-\`$as_me' creates a local libtool stub from the current configuration,
+-for use in further configure time tests before the real libtool is
+-generated.
+-
+-Usage: $[0] [[OPTIONS]]
+-
+- -h, --help print this help, then exit
+- -V, --version print version number, then exit
+- -q, --quiet do not print progress messages
+- -d, --debug don't remove temporary files
+-
+-Report bugs to <bug-libtool@gnu.org>."
+-
+-lt_cl_version="\
+-m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+-m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+-configured by $[0], generated by m4_PACKAGE_STRING.
+-
+-Copyright (C) 2008 Free Software Foundation, Inc.
+-This config.lt script is free software; the Free Software Foundation
+-gives unlimited permision to copy, distribute and modify it."
+-
+-while test $[#] != 0
+-do
+- case $[1] in
+- --version | --v* | -V )
+- echo "$lt_cl_version"; exit 0 ;;
+- --help | --h* | -h )
+- echo "$lt_cl_help"; exit 0 ;;
+- --debug | --d* | -d )
+- debug=: ;;
+- --quiet | --q* | --silent | --s* | -q )
+- lt_cl_silent=: ;;
+-
+- -*) AC_MSG_ERROR([unrecognized option: $[1]
+-Try \`$[0] --help' for more information.]) ;;
+-
+- *) AC_MSG_ERROR([unrecognized argument: $[1]
+-Try \`$[0] --help' for more information.]) ;;
+- esac
+- shift
+-done
+-
+-if $lt_cl_silent; then
+- exec AS_MESSAGE_FD>/dev/null
+-fi
+-_LTEOF
+-
+-cat >>"$CONFIG_LT" <<_LTEOF
+-_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+-_LTEOF
+-
+-cat >>"$CONFIG_LT" <<\_LTEOF
+-AC_MSG_NOTICE([creating $ofile])
+-_LT_OUTPUT_LIBTOOL_COMMANDS
+-AS_EXIT(0)
+-_LTEOF
+-chmod +x "$CONFIG_LT"
+-
+-# configure is writing to config.log, but config.lt does its own redirection,
+-# appending to config.log, which fails on DOS, as config.log is still kept
+-# open by configure. Here we exec the FD to /dev/null, effectively closing
+-# config.log, so it can be properly (re)opened and appended to by config.lt.
+-if test "$no_create" != yes; then
+- lt_cl_success=:
+- test "$silent" = yes &&
+- lt_config_lt_args="$lt_config_lt_args --quiet"
+- exec AS_MESSAGE_LOG_FD>/dev/null
+- $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+- exec AS_MESSAGE_LOG_FD>>config.log
+- $lt_cl_success || AS_EXIT(1)
+-fi
+-])# LT_OUTPUT
+-
+-
+-# _LT_CONFIG(TAG)
+-# ---------------
+-# If TAG is the built-in tag, create an initial libtool script with a
+-# default configuration from the untagged config vars. Otherwise add code
+-# to config.status for appending the configuration named by TAG from the
+-# matching tagged config vars.
+-m4_defun([_LT_CONFIG],
+-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-_LT_CONFIG_SAVE_COMMANDS([
+- m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+- m4_if(_LT_TAG, [C], [
+- # See if we are running on zsh, and set the options which allow our
+- # commands through without removal of \ escapes.
+- if test -n "${ZSH_VERSION+set}" ; then
+- setopt NO_GLOB_SUBST
+- fi
+-
+- cfgfile="${ofile}T"
+- trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+- $RM "$cfgfile"
+-
+- cat <<_LT_EOF >> "$cfgfile"
+-#! $SHELL
+-
+-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+-#
+-_LT_COPYING
+-_LT_LIBTOOL_TAGS
+-
+-# ### BEGIN LIBTOOL CONFIG
+-_LT_LIBTOOL_CONFIG_VARS
+-_LT_LIBTOOL_TAG_VARS
+-# ### END LIBTOOL CONFIG
+-
+-_LT_EOF
+-
+- case $host_os in
+- aix3*)
+- cat <<\_LT_EOF >> "$cfgfile"
+-# AIX sometimes has problems with the GCC collect2 program. For some
+-# reason, if we set the COLLECT_NAMES environment variable, the problems
+-# vanish in a puff of smoke.
+-if test "X${COLLECT_NAMES+set}" != Xset; then
+- COLLECT_NAMES=
+- export COLLECT_NAMES
+-fi
+-_LT_EOF
+- ;;
+- esac
+-
+- _LT_PROG_LTMAIN
+-
+- # We use sed instead of cat because bash on DJGPP gets confused if
+- # if finds mixed CR/LF and LF-only lines. Since sed operates in
+- # text mode, it properly converts lines to CR/LF. This bash problem
+- # is reportedly fixed, but why not run on old versions too?
+- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- _LT_PROG_XSI_SHELLFNS
+-
+- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- mv -f "$cfgfile" "$ofile" ||
+- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+- chmod +x "$ofile"
+-],
+-[cat <<_LT_EOF >> "$ofile"
+-
+-dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+-dnl in a comment (ie after a #).
+-# ### BEGIN LIBTOOL TAG CONFIG: $1
+-_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+-# ### END LIBTOOL TAG CONFIG: $1
+-_LT_EOF
+-])dnl /m4_if
+-],
+-[m4_if([$1], [], [
+- PACKAGE='$PACKAGE'
+- VERSION='$VERSION'
+- TIMESTAMP='$TIMESTAMP'
+- RM='$RM'
+- ofile='$ofile'], [])
+-])dnl /_LT_CONFIG_SAVE_COMMANDS
+-])# _LT_CONFIG
+-
+-
+-# LT_SUPPORTED_TAG(TAG)
+-# ---------------------
+-# Trace this macro to discover what tags are supported by the libtool
+-# --tag option, using:
+-# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+-AC_DEFUN([LT_SUPPORTED_TAG], [])
+-
+-
+-# C support is built-in for now
+-m4_define([_LT_LANG_C_enabled], [])
+-m4_define([_LT_TAGS], [])
+-
+-
+-# LT_LANG(LANG)
+-# -------------
+-# Enable libtool support for the given language if not already enabled.
+-AC_DEFUN([LT_LANG],
+-[AC_BEFORE([$0], [LT_OUTPUT])dnl
+-m4_case([$1],
+- [C], [_LT_LANG(C)],
+- [C++], [_LT_LANG(CXX)],
+- [Java], [_LT_LANG(GCJ)],
+- [Fortran 77], [_LT_LANG(F77)],
+- [Fortran], [_LT_LANG(FC)],
+- [Windows Resource], [_LT_LANG(RC)],
+- [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+- [_LT_LANG($1)],
+- [m4_fatal([$0: unsupported language: "$1"])])])dnl
+-])# LT_LANG
+-
+-
+-# _LT_LANG(LANGNAME)
+-# ------------------
+-m4_defun([_LT_LANG],
+-[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+- [LT_SUPPORTED_TAG([$1])dnl
+- m4_append([_LT_TAGS], [$1 ])dnl
+- m4_define([_LT_LANG_]$1[_enabled], [])dnl
+- _LT_LANG_$1_CONFIG($1)])dnl
+-])# _LT_LANG
+-
+-
+-# _LT_LANG_DEFAULT_CONFIG
+-# -----------------------
+-m4_defun([_LT_LANG_DEFAULT_CONFIG],
+-[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+- [LT_LANG(CXX)],
+- [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+-
+-AC_PROVIDE_IFELSE([AC_PROG_F77],
+- [LT_LANG(F77)],
+- [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+-
+-AC_PROVIDE_IFELSE([AC_PROG_FC],
+- [LT_LANG(FC)],
+- [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+-
+-dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+-dnl pulling things in needlessly.
+-AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+- [LT_LANG(GCJ)],
+- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+- [LT_LANG(GCJ)],
+- [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+- [LT_LANG(GCJ)],
+- [m4_ifdef([AC_PROG_GCJ],
+- [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+- m4_ifdef([A][M_PROG_GCJ],
+- [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+- m4_ifdef([LT_PROG_GCJ],
+- [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+-
+-AC_PROVIDE_IFELSE([LT_PROG_RC],
+- [LT_LANG(RC)],
+- [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+-])# _LT_LANG_DEFAULT_CONFIG
+-
+-# Obsolete macros:
+-AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+-AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+-AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+-AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+-dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+-dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+-dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+-
+-
+-# _LT_TAG_COMPILER
+-# ----------------
+-m4_defun([_LT_TAG_COMPILER],
+-[AC_REQUIRE([AC_PROG_CC])dnl
+-
+-_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+-_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+-_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+-_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+-
+-# If no C compiler was specified, use CC.
+-LTCC=${LTCC-"$CC"}
+-
+-# If no C compiler flags were specified, use CFLAGS.
+-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+-
+-# Allow CC to be a program name with arguments.
+-compiler=$CC
+-])# _LT_TAG_COMPILER
+-
+-
+-# _LT_COMPILER_BOILERPLATE
+-# ------------------------
+-# Check for compiler boilerplate output or warnings with
+-# the simple compiler test code.
+-m4_defun([_LT_COMPILER_BOILERPLATE],
+-[m4_require([_LT_DECL_SED])dnl
+-ac_outfile=conftest.$ac_objext
+-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+-_lt_compiler_boilerplate=`cat conftest.err`
+-$RM conftest*
+-])# _LT_COMPILER_BOILERPLATE
+-
+-
+-# _LT_LINKER_BOILERPLATE
+-# ----------------------
+-# Check for linker boilerplate output or warnings with
+-# the simple link test code.
+-m4_defun([_LT_LINKER_BOILERPLATE],
+-[m4_require([_LT_DECL_SED])dnl
+-ac_outfile=conftest.$ac_objext
+-echo "$lt_simple_link_test_code" >conftest.$ac_ext
+-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+-_lt_linker_boilerplate=`cat conftest.err`
+-$RM -r conftest*
+-])# _LT_LINKER_BOILERPLATE
+-
+-# _LT_REQUIRED_DARWIN_CHECKS
+-# -------------------------
+-m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+- case $host_os in
+- rhapsody* | darwin*)
+- AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+- AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+- AC_CHECK_TOOL([LIPO], [lipo], [:])
+- AC_CHECK_TOOL([OTOOL], [otool], [:])
+- AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+- _LT_DECL([], [DSYMUTIL], [1],
+- [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+- _LT_DECL([], [NMEDIT], [1],
+- [Tool to change global to local symbols on Mac OS X])
+- _LT_DECL([], [LIPO], [1],
+- [Tool to manipulate fat objects and archives on Mac OS X])
+- _LT_DECL([], [OTOOL], [1],
+- [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+- _LT_DECL([], [OTOOL64], [1],
+- [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+-
+- AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+- [lt_cv_apple_cc_single_mod=no
+- if test -z "${LT_MULTI_MODULE}"; then
+- # By default we will add the -single_module flag. You can override
+- # by either setting the environment variable LT_MULTI_MODULE
+- # non-empty at configure time, or by adding -multi_module to the
+- # link flags.
+- rm -rf libconftest.dylib*
+- echo "int foo(void){return 1;}" > conftest.c
+- echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+--dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+- -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+- _lt_result=$?
+- if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+- lt_cv_apple_cc_single_mod=yes
+- else
+- cat conftest.err >&AS_MESSAGE_LOG_FD
+- fi
+- rm -rf libconftest.dylib*
+- rm -f conftest.*
+- fi])
+- AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+- [lt_cv_ld_exported_symbols_list],
+- [lt_cv_ld_exported_symbols_list=no
+- save_LDFLAGS=$LDFLAGS
+- echo "_main" > conftest.sym
+- LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+- [lt_cv_ld_exported_symbols_list=yes],
+- [lt_cv_ld_exported_symbols_list=no])
+- LDFLAGS="$save_LDFLAGS"
+- ])
+- case $host_os in
+- rhapsody* | darwin1.[[012]])
+- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+- darwin1.*)
+- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+- darwin*) # darwin 5.x on
+- # if running on 10.5 or later, the deployment target defaults
+- # to the OS version, if on x86, and 10.4, the deployment
+- # target defaults to 10.4. Don't you love it?
+- case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+- 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+- 10.[[012]]*)
+- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+- 10.*)
+- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+- esac
+- ;;
+- esac
+- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+- _lt_dar_single_mod='$single_module'
+- fi
+- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+- else
+- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- fi
+- if test "$DSYMUTIL" != ":"; then
+- _lt_dsymutil='~$DSYMUTIL $lib || :'
+- else
+- _lt_dsymutil=
+- fi
+- ;;
+- esac
+-])
+-
+-
+-# _LT_DARWIN_LINKER_FEATURES
+-# --------------------------
+-# Checks for linker and compiler features on darwin
+-m4_defun([_LT_DARWIN_LINKER_FEATURES],
+-[
+- m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_automatic, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+- case $cc_basename in
+- ifort*) _lt_dar_can_shared=yes ;;
+- *) _lt_dar_can_shared=$GCC ;;
+- esac
+- if test "$_lt_dar_can_shared" = "yes"; then
+- output_verbose_link_cmd=echo
+- _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+- _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+- _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+- m4_if([$1], [CXX],
+-[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+- _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+- fi
+-],[])
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+-])
+-
+-# _LT_SYS_MODULE_PATH_AIX
+-# -----------------------
+-# Links a minimal program and checks the executable
+-# for the system default hardcoded library path. In most cases,
+-# this is /usr/lib:/lib, but when the MPI compilers are used
+-# the location of the communication and MPI libs are included too.
+-# If we don't find anything, use the default library path according
+-# to the aix ld manual.
+-m4_defun([_LT_SYS_MODULE_PATH_AIX],
+-[m4_require([_LT_DECL_SED])dnl
+-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi],[])
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+-])# _LT_SYS_MODULE_PATH_AIX
+-
+-
+-# _LT_SHELL_INIT(ARG)
+-# -------------------
+-m4_define([_LT_SHELL_INIT],
+-[ifdef([AC_DIVERSION_NOTICE],
+- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+- [AC_DIVERT_PUSH(NOTICE)])
+-$1
+-AC_DIVERT_POP
+-])# _LT_SHELL_INIT
+-
+-
+-# _LT_PROG_ECHO_BACKSLASH
+-# -----------------------
+-# Add some code to the start of the generated configure script which
+-# will find an echo command which doesn't interpret backslashes.
+-m4_defun([_LT_PROG_ECHO_BACKSLASH],
+-[_LT_SHELL_INIT([
+-# Check that we are running under the correct shell.
+-SHELL=${CONFIG_SHELL-/bin/sh}
+-
+-case X$lt_ECHO in
+-X*--fallback-echo)
+- # Remove one level of quotation (which was required for Make).
+- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+- ;;
+-esac
+-
+-ECHO=${lt_ECHO-echo}
+-if test "X[$]1" = X--no-reexec; then
+- # Discard the --no-reexec flag, and continue.
+- shift
+-elif test "X[$]1" = X--fallback-echo; then
+- # Avoid inline document here, it may be left over
+- :
+-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+- # Yippee, $ECHO works!
+- :
+-else
+- # Restart under the correct shell.
+- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+-fi
+-
+-if test "X[$]1" = X--fallback-echo; then
+- # used as fallback echo
+- shift
+- cat <<_LT_EOF
+-[$]*
+-_LT_EOF
+- exit 0
+-fi
+-
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+-
+-if test -z "$lt_ECHO"; then
+- if test "X${echo_test_string+set}" != Xset; then
+- # find a string as large as possible, as long as the shell can cope with it
+- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+- if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+- then
+- break
+- fi
+- done
+- fi
+-
+- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- :
+- else
+- # The Solaris, AIX, and Digital Unix default echo programs unquote
+- # backslashes. This makes it impossible to quote backslashes using
+- # echo "$something" | sed 's/\\/\\\\/g'
+- #
+- # So, first we look for a working echo in the user's PATH.
+-
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for dir in $PATH /usr/ucb; do
+- IFS="$lt_save_ifs"
+- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- ECHO="$dir/echo"
+- break
+- fi
+- done
+- IFS="$lt_save_ifs"
+-
+- if test "X$ECHO" = Xecho; then
+- # We didn't find a better echo, so look for alternatives.
+- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # This shell has a builtin print -r that does the trick.
+- ECHO='print -r'
+- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+- test "X$CONFIG_SHELL" != X/bin/ksh; then
+- # If we have ksh, try running configure again with it.
+- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+- export ORIGINAL_CONFIG_SHELL
+- CONFIG_SHELL=/bin/ksh
+- export CONFIG_SHELL
+- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+- else
+- # Try using printf.
+- ECHO='printf %s\n'
+- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # Cool, printf works
+- :
+- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+- export CONFIG_SHELL
+- SHELL="$CONFIG_SHELL"
+- export SHELL
+- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+- else
+- # maybe with a smaller string...
+- prev=:
+-
+- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+- then
+- break
+- fi
+- prev="$cmd"
+- done
+-
+- if test "$prev" != 'sed 50q "[$]0"'; then
+- echo_test_string=`eval $prev`
+- export echo_test_string
+- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+- else
+- # Oops. We lost completely, so just stick with echo.
+- ECHO=echo
+- fi
+- fi
+- fi
+- fi
+- fi
+-fi
+-
+-# Copy echo and quote the copy suitably for passing to libtool from
+-# the Makefile, instead of quoting the original, which is used later.
+-lt_ECHO=$ECHO
+-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+- lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+-fi
+-
+-AC_SUBST(lt_ECHO)
+-])
+-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+-_LT_DECL([], [ECHO], [1],
+- [An echo program that does not interpret backslashes])
+-])# _LT_PROG_ECHO_BACKSLASH
+-
+-
+-# _LT_ENABLE_LOCK
+-# ---------------
+-m4_defun([_LT_ENABLE_LOCK],
+-[AC_ARG_ENABLE([libtool-lock],
+- [AS_HELP_STRING([--disable-libtool-lock],
+- [avoid locking (might break parallel builds)])])
+-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+-
+-# Some flags need to be propagated to the compiler or linker for good
+-# libtool support.
+-case $host in
+-ia64-*-hpux*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.$ac_objext` in
+- *ELF-32*)
+- HPUX_IA64_MODE="32"
+- ;;
+- *ELF-64*)
+- HPUX_IA64_MODE="64"
+- ;;
+- esac
+- fi
+- rm -rf conftest*
+- ;;
+-*-*-irix6*)
+- # Find out which ABI we are using.
+- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- if test "$lt_cv_prog_gnu_ld" = yes; then
+- case `/usr/bin/file conftest.$ac_objext` in
+- *32-bit*)
+- LD="${LD-ld} -melf32bsmip"
+- ;;
+- *N32*)
+- LD="${LD-ld} -melf32bmipn32"
+- ;;
+- *64-bit*)
+- LD="${LD-ld} -melf64bmip"
+- ;;
+- esac
+- else
+- case `/usr/bin/file conftest.$ac_objext` in
+- *32-bit*)
+- LD="${LD-ld} -32"
+- ;;
+- *N32*)
+- LD="${LD-ld} -n32"
+- ;;
+- *64-bit*)
+- LD="${LD-ld} -64"
+- ;;
+- esac
+- fi
+- fi
+- rm -rf conftest*
+- ;;
+-
+-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.o` in
+- *32-bit*)
+- case $host in
+- x86_64-*kfreebsd*-gnu)
+- LD="${LD-ld} -m elf_i386_fbsd"
+- ;;
+- x86_64-*linux*)
+- LD="${LD-ld} -m elf_i386"
+- ;;
+- ppc64-*linux*|powerpc64-*linux*)
+- LD="${LD-ld} -m elf32ppclinux"
+- ;;
+- s390x-*linux*)
+- LD="${LD-ld} -m elf_s390"
+- ;;
+- sparc64-*linux*)
+- LD="${LD-ld} -m elf32_sparc"
+- ;;
+- esac
+- ;;
+- *64-bit*)
+- case $host in
+- x86_64-*kfreebsd*-gnu)
+- LD="${LD-ld} -m elf_x86_64_fbsd"
+- ;;
+- x86_64-*linux*)
+- LD="${LD-ld} -m elf_x86_64"
+- ;;
+- ppc*-*linux*|powerpc*-*linux*)
+- LD="${LD-ld} -m elf64ppc"
+- ;;
+- s390*-*linux*|s390*-*tpf*)
+- LD="${LD-ld} -m elf64_s390"
+- ;;
+- sparc*-*linux*)
+- LD="${LD-ld} -m elf64_sparc"
+- ;;
+- esac
+- ;;
+- esac
+- fi
+- rm -rf conftest*
+- ;;
+-
+-*-*-sco3.2v5*)
+- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+- SAVE_CFLAGS="$CFLAGS"
+- CFLAGS="$CFLAGS -belf"
+- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+- [AC_LANG_PUSH(C)
+- AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+- AC_LANG_POP])
+- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+- CFLAGS="$SAVE_CFLAGS"
+- fi
+- ;;
+-sparc*-*solaris*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.o` in
+- *64-bit*)
+- case $lt_cv_prog_gnu_ld in
+- yes*) LD="${LD-ld} -m elf64_sparc" ;;
+- *)
+- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+- LD="${LD-ld} -64"
+- fi
+- ;;
+- esac
+- ;;
+- esac
+- fi
+- rm -rf conftest*
+- ;;
+-esac
+-
+-need_locks="$enable_libtool_lock"
+-])# _LT_ENABLE_LOCK
+-
+-
+-# _LT_CMD_OLD_ARCHIVE
+-# -------------------
+-m4_defun([_LT_CMD_OLD_ARCHIVE],
+-[AC_CHECK_TOOL(AR, ar, false)
+-test -z "$AR" && AR=ar
+-test -z "$AR_FLAGS" && AR_FLAGS=cru
+-_LT_DECL([], [AR], [1], [The archiver])
+-_LT_DECL([], [AR_FLAGS], [1])
+-
+-AC_CHECK_TOOL(STRIP, strip, :)
+-test -z "$STRIP" && STRIP=:
+-_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+-
+-AC_CHECK_TOOL(RANLIB, ranlib, :)
+-test -z "$RANLIB" && RANLIB=:
+-_LT_DECL([], [RANLIB], [1],
+- [Commands used to install an old-style archive])
+-
+-# Determine commands to create old-style static archives.
+-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+-old_postinstall_cmds='chmod 644 $oldlib'
+-old_postuninstall_cmds=
+-
+-if test -n "$RANLIB"; then
+- case $host_os in
+- openbsd*)
+- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+- ;;
+- *)
+- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+- ;;
+- esac
+- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+-fi
+-_LT_DECL([], [old_postinstall_cmds], [2])
+-_LT_DECL([], [old_postuninstall_cmds], [2])
+-_LT_TAGDECL([], [old_archive_cmds], [2],
+- [Commands used to build an old-style archive])
+-])# _LT_CMD_OLD_ARCHIVE
+-
+-
+-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+-# ----------------------------------------------------------------
+-# Check whether the given compiler option works
+-AC_DEFUN([_LT_COMPILER_OPTION],
+-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_DECL_SED])dnl
+-AC_CACHE_CHECK([$1], [$2],
+- [$2=no
+- m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+- lt_compiler_flag="$3"
+- # Insert the option either (1) after the last *FLAGS variable, or
+- # (2) before a word containing "conftest.", or (3) at the end.
+- # Note that $ac_compile itself does not contain backslashes and begins
+- # with a dollar sign (not a hyphen), so the echo should work correctly.
+- # The option is referenced via a variable to avoid confusing sed.
+- lt_compile=`echo "$ac_compile" | $SED \
+- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+- -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+- (eval "$lt_compile" 2>conftest.err)
+- ac_status=$?
+- cat conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+- if (exit $ac_status) && test -s "$ac_outfile"; then
+- # The compiler can only warn and ignore the option if not recognized
+- # So say no if there are warnings other than the usual output.
+- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+- $2=yes
+- fi
+- fi
+- $RM conftest*
+-])
+-
+-if test x"[$]$2" = xyes; then
+- m4_if([$5], , :, [$5])
+-else
+- m4_if([$6], , :, [$6])
+-fi
+-])# _LT_COMPILER_OPTION
+-
+-# Old name:
+-AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+-
+-
+-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+-# [ACTION-SUCCESS], [ACTION-FAILURE])
+-# ----------------------------------------------------
+-# Check whether the given linker option works
+-AC_DEFUN([_LT_LINKER_OPTION],
+-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_DECL_SED])dnl
+-AC_CACHE_CHECK([$1], [$2],
+- [$2=no
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS $3"
+- echo "$lt_simple_link_test_code" > conftest.$ac_ext
+- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+- # The linker can only warn and ignore the option if not recognized
+- # So say no if there are warnings
+- if test -s conftest.err; then
+- # Append any errors to the config.log.
+- cat conftest.err 1>&AS_MESSAGE_LOG_FD
+- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+- if diff conftest.exp conftest.er2 >/dev/null; then
+- $2=yes
+- fi
+- else
+- $2=yes
+- fi
+- fi
+- $RM -r conftest*
+- LDFLAGS="$save_LDFLAGS"
+-])
+-
+-if test x"[$]$2" = xyes; then
+- m4_if([$4], , :, [$4])
+-else
+- m4_if([$5], , :, [$5])
+-fi
+-])# _LT_LINKER_OPTION
+-
+-# Old name:
+-AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+-
+-
+-# LT_CMD_MAX_LEN
+-#---------------
+-AC_DEFUN([LT_CMD_MAX_LEN],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-# find the maximum length of command line arguments
+-AC_MSG_CHECKING([the maximum length of command line arguments])
+-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+- i=0
+- teststring="ABCD"
+-
+- case $build_os in
+- msdosdjgpp*)
+- # On DJGPP, this test can blow up pretty badly due to problems in libc
+- # (any single argument exceeding 2000 bytes causes a buffer overrun
+- # during glob expansion). Even if it were fixed, the result of this
+- # check would be larger than it should be.
+- lt_cv_sys_max_cmd_len=12288; # 12K is about right
+- ;;
+-
+- gnu*)
+- # Under GNU Hurd, this test is not required because there is
+- # no limit to the length of command line arguments.
+- # Libtool will interpret -1 as no limit whatsoever
+- lt_cv_sys_max_cmd_len=-1;
+- ;;
+-
+- cygwin* | mingw* | cegcc*)
+- # On Win9x/ME, this test blows up -- it succeeds, but takes
+- # about 5 minutes as the teststring grows exponentially.
+- # Worse, since 9x/ME are not pre-emptively multitasking,
+- # you end up with a "frozen" computer, even though with patience
+- # the test eventually succeeds (with a max line length of 256k).
+- # Instead, let's just punt: use the minimum linelength reported by
+- # all of the supported platforms: 8192 (on NT/2K/XP).
+- lt_cv_sys_max_cmd_len=8192;
+- ;;
+-
+- amigaos*)
+- # On AmigaOS with pdksh, this test takes hours, literally.
+- # So we just punt and use a minimum line length of 8192.
+- lt_cv_sys_max_cmd_len=8192;
+- ;;
+-
+- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+- # This has been around since 386BSD, at least. Likely further.
+- if test -x /sbin/sysctl; then
+- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+- elif test -x /usr/sbin/sysctl; then
+- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+- else
+- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+- fi
+- # And add a safety zone
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+- ;;
+-
+- interix*)
+- # We know the value 262144 and hardcode it with a safety zone (like BSD)
+- lt_cv_sys_max_cmd_len=196608
+- ;;
+-
+- osf*)
+- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+- # nice to cause kernel panics so lets avoid the loop below.
+- # First set a reasonable default.
+- lt_cv_sys_max_cmd_len=16384
+- #
+- if test -x /sbin/sysconfig; then
+- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+- *1*) lt_cv_sys_max_cmd_len=-1 ;;
+- esac
+- fi
+- ;;
+- sco3.2v5*)
+- lt_cv_sys_max_cmd_len=102400
+- ;;
+- sysv5* | sco5v6* | sysv4.2uw2*)
+- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+- if test -n "$kargmax"; then
+- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+- else
+- lt_cv_sys_max_cmd_len=32768
+- fi
+- ;;
+- *)
+- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+- if test -n "$lt_cv_sys_max_cmd_len"; then
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+- else
+- # Make teststring a little bigger before we do anything with it.
+- # a 1K string should be a reasonable start.
+- for i in 1 2 3 4 5 6 7 8 ; do
+- teststring=$teststring$teststring
+- done
+- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+- # If test is not a shell built-in, we'll probably end up computing a
+- # maximum length that is only half of the actual maximum length, but
+- # we can't tell.
+- while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+- = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+- test $i != 17 # 1/2 MB should be enough
+- do
+- i=`expr $i + 1`
+- teststring=$teststring$teststring
+- done
+- # Only check the string length outside the loop.
+- lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+- teststring=
+- # Add a significant safety factor because C++ compilers can tack on
+- # massive amounts of additional arguments before passing them to the
+- # linker. It appears as though 1/2 is a usable value.
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+- fi
+- ;;
+- esac
+-])
+-if test -n $lt_cv_sys_max_cmd_len ; then
+- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+-else
+- AC_MSG_RESULT(none)
+-fi
+-max_cmd_len=$lt_cv_sys_max_cmd_len
+-_LT_DECL([], [max_cmd_len], [0],
+- [What is the maximum length of a command?])
+-])# LT_CMD_MAX_LEN
+-
+-# Old name:
+-AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+-
+-
+-# _LT_HEADER_DLFCN
+-# ----------------
+-m4_defun([_LT_HEADER_DLFCN],
+-[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+-])# _LT_HEADER_DLFCN
+-
+-
+-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+-# ----------------------------------------------------------------
+-m4_defun([_LT_TRY_DLOPEN_SELF],
+-[m4_require([_LT_HEADER_DLFCN])dnl
+-if test "$cross_compiling" = yes; then :
+- [$4]
+-else
+- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+- lt_status=$lt_dlunknown
+- cat > conftest.$ac_ext <<_LT_EOF
+-[#line __oline__ "configure"
+-#include "confdefs.h"
+-
+-#if HAVE_DLFCN_H
+-#include <dlfcn.h>
+-#endif
+-
+-#include <stdio.h>
+-
+-#ifdef RTLD_GLOBAL
+-# define LT_DLGLOBAL RTLD_GLOBAL
+-#else
+-# ifdef DL_GLOBAL
+-# define LT_DLGLOBAL DL_GLOBAL
+-# else
+-# define LT_DLGLOBAL 0
+-# endif
+-#endif
+-
+-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+- find out it does not work in some platform. */
+-#ifndef LT_DLLAZY_OR_NOW
+-# ifdef RTLD_LAZY
+-# define LT_DLLAZY_OR_NOW RTLD_LAZY
+-# else
+-# ifdef DL_LAZY
+-# define LT_DLLAZY_OR_NOW DL_LAZY
+-# else
+-# ifdef RTLD_NOW
+-# define LT_DLLAZY_OR_NOW RTLD_NOW
+-# else
+-# ifdef DL_NOW
+-# define LT_DLLAZY_OR_NOW DL_NOW
+-# else
+-# define LT_DLLAZY_OR_NOW 0
+-# endif
+-# endif
+-# endif
+-# endif
+-#endif
+-
+-void fnord() { int i=42;}
+-int main ()
+-{
+- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+- int status = $lt_dlunknown;
+-
+- if (self)
+- {
+- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+- /* dlclose (self); */
+- }
+- else
+- puts (dlerror ());
+-
+- return status;
+-}]
+-_LT_EOF
+- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+- lt_status=$?
+- case x$lt_status in
+- x$lt_dlno_uscore) $1 ;;
+- x$lt_dlneed_uscore) $2 ;;
+- x$lt_dlunknown|x*) $3 ;;
+- esac
+- else :
+- # compilation failed
+- $3
+- fi
+-fi
+-rm -fr conftest*
+-])# _LT_TRY_DLOPEN_SELF
+-
+-
+-# LT_SYS_DLOPEN_SELF
+-# ------------------
+-AC_DEFUN([LT_SYS_DLOPEN_SELF],
+-[m4_require([_LT_HEADER_DLFCN])dnl
+-if test "x$enable_dlopen" != xyes; then
+- enable_dlopen=unknown
+- enable_dlopen_self=unknown
+- enable_dlopen_self_static=unknown
+-else
+- lt_cv_dlopen=no
+- lt_cv_dlopen_libs=
+-
+- case $host_os in
+- beos*)
+- lt_cv_dlopen="load_add_on"
+- lt_cv_dlopen_libs=
+- lt_cv_dlopen_self=yes
+- ;;
+-
+- mingw* | pw32* | cegcc*)
+- lt_cv_dlopen="LoadLibrary"
+- lt_cv_dlopen_libs=
+- ;;
+-
+- cygwin*)
+- lt_cv_dlopen="dlopen"
+- lt_cv_dlopen_libs=
+- ;;
+-
+- darwin*)
+- # if libdl is installed we need to link against it
+- AC_CHECK_LIB([dl], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+- lt_cv_dlopen="dyld"
+- lt_cv_dlopen_libs=
+- lt_cv_dlopen_self=yes
+- ])
+- ;;
+-
+- *)
+- AC_CHECK_FUNC([shl_load],
+- [lt_cv_dlopen="shl_load"],
+- [AC_CHECK_LIB([dld], [shl_load],
+- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+- [AC_CHECK_FUNC([dlopen],
+- [lt_cv_dlopen="dlopen"],
+- [AC_CHECK_LIB([dl], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+- [AC_CHECK_LIB([svld], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+- [AC_CHECK_LIB([dld], [dld_link],
+- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+- ])
+- ])
+- ])
+- ])
+- ])
+- ;;
+- esac
+-
+- if test "x$lt_cv_dlopen" != xno; then
+- enable_dlopen=yes
+- else
+- enable_dlopen=no
+- fi
+-
+- case $lt_cv_dlopen in
+- dlopen)
+- save_CPPFLAGS="$CPPFLAGS"
+- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+-
+- save_LDFLAGS="$LDFLAGS"
+- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+-
+- save_LIBS="$LIBS"
+- LIBS="$lt_cv_dlopen_libs $LIBS"
+-
+- AC_CACHE_CHECK([whether a program can dlopen itself],
+- lt_cv_dlopen_self, [dnl
+- _LT_TRY_DLOPEN_SELF(
+- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+- ])
+-
+- if test "x$lt_cv_dlopen_self" = xyes; then
+- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+- lt_cv_dlopen_self_static, [dnl
+- _LT_TRY_DLOPEN_SELF(
+- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+- ])
+- fi
+-
+- CPPFLAGS="$save_CPPFLAGS"
+- LDFLAGS="$save_LDFLAGS"
+- LIBS="$save_LIBS"
+- ;;
+- esac
+-
+- case $lt_cv_dlopen_self in
+- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+- *) enable_dlopen_self=unknown ;;
+- esac
+-
+- case $lt_cv_dlopen_self_static in
+- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+- *) enable_dlopen_self_static=unknown ;;
+- esac
+-fi
+-_LT_DECL([dlopen_support], [enable_dlopen], [0],
+- [Whether dlopen is supported])
+-_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+- [Whether dlopen of programs is supported])
+-_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+- [Whether dlopen of statically linked programs is supported])
+-])# LT_SYS_DLOPEN_SELF
+-
+-# Old name:
+-AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+-
+-
+-# _LT_COMPILER_C_O([TAGNAME])
+-# ---------------------------
+-# Check to see if options -c and -o are simultaneously supported by compiler.
+-# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+-m4_defun([_LT_COMPILER_C_O],
+-[m4_require([_LT_DECL_SED])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_TAG_COMPILER])dnl
+-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+- [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+- [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+- $RM -r conftest 2>/dev/null
+- mkdir conftest
+- cd conftest
+- mkdir out
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+-
+- lt_compiler_flag="-o out/conftest2.$ac_objext"
+- # Insert the option either (1) after the last *FLAGS variable, or
+- # (2) before a word containing "conftest.", or (3) at the end.
+- # Note that $ac_compile itself does not contain backslashes and begins
+- # with a dollar sign (not a hyphen), so the echo should work correctly.
+- lt_compile=`echo "$ac_compile" | $SED \
+- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+- -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+- (eval "$lt_compile" 2>out/conftest.err)
+- ac_status=$?
+- cat out/conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+- if (exit $ac_status) && test -s out/conftest2.$ac_objext
+- then
+- # The compiler can only warn and ignore the option if not recognized
+- # So say no if there are warnings
+- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+- _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+- fi
+- fi
+- chmod u+w . 2>&AS_MESSAGE_LOG_FD
+- $RM conftest*
+- # SGI C++ compiler will create directory out/ii_files/ for
+- # template instantiation
+- test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+- $RM out/* && rmdir out
+- cd ..
+- $RM -r conftest
+- $RM conftest*
+-])
+-_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+- [Does compiler simultaneously support -c and -o options?])
+-])# _LT_COMPILER_C_O
+-
+-
+-# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+-# ----------------------------------
+-# Check to see if we can do hard links to lock some files if needed
+-m4_defun([_LT_COMPILER_FILE_LOCKS],
+-[m4_require([_LT_ENABLE_LOCK])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-_LT_COMPILER_C_O([$1])
+-
+-hard_links="nottested"
+-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+- # do not overwrite the value of need_locks provided by the user
+- AC_MSG_CHECKING([if we can lock with hard links])
+- hard_links=yes
+- $RM conftest*
+- ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- touch conftest.a
+- ln conftest.a conftest.b 2>&5 || hard_links=no
+- ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- AC_MSG_RESULT([$hard_links])
+- if test "$hard_links" = no; then
+- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+- need_locks=warn
+- fi
+-else
+- need_locks=no
+-fi
+-_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+-])# _LT_COMPILER_FILE_LOCKS
+-
+-
+-# _LT_CHECK_OBJDIR
+-# ----------------
+-m4_defun([_LT_CHECK_OBJDIR],
+-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+-[rm -f .libs 2>/dev/null
+-mkdir .libs 2>/dev/null
+-if test -d .libs; then
+- lt_cv_objdir=.libs
+-else
+- # MS-DOS does not allow filenames that begin with a dot.
+- lt_cv_objdir=_libs
+-fi
+-rmdir .libs 2>/dev/null])
+-objdir=$lt_cv_objdir
+-_LT_DECL([], [objdir], [0],
+- [The name of the directory that contains temporary libtool files])dnl
+-m4_pattern_allow([LT_OBJDIR])dnl
+-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+- [Define to the sub-directory in which libtool stores uninstalled libraries.])
+-])# _LT_CHECK_OBJDIR
+-
+-
+-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+-# --------------------------------------
+-# Check hardcoding attributes.
+-m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+-[AC_MSG_CHECKING([how to hardcode library paths into programs])
+-_LT_TAGVAR(hardcode_action, $1)=
+-if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+- test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+- test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+-
+- # We can hardcode non-existent directories.
+- if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+- # If the only mechanism to avoid hardcoding is shlibpath_var, we
+- # have to relink, otherwise we might link with an installed library
+- # when we should be linking with a yet-to-be-installed one
+- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+- test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+- # Linking always hardcodes the temporary library directory.
+- _LT_TAGVAR(hardcode_action, $1)=relink
+- else
+- # We can link without hardcoding, and we can hardcode nonexisting dirs.
+- _LT_TAGVAR(hardcode_action, $1)=immediate
+- fi
+-else
+- # We cannot hardcode anything, or else we can only hardcode existing
+- # directories.
+- _LT_TAGVAR(hardcode_action, $1)=unsupported
+-fi
+-AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+-
+-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+- test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+- # Fast installation is not supported
+- enable_fast_install=no
+-elif test "$shlibpath_overrides_runpath" = yes ||
+- test "$enable_shared" = no; then
+- # Fast installation is not necessary
+- enable_fast_install=needless
+-fi
+-_LT_TAGDECL([], [hardcode_action], [0],
+- [How to hardcode a shared library path into an executable])
+-])# _LT_LINKER_HARDCODE_LIBPATH
+-
+-
+-# _LT_CMD_STRIPLIB
+-# ----------------
+-m4_defun([_LT_CMD_STRIPLIB],
+-[m4_require([_LT_DECL_EGREP])
+-striplib=
+-old_striplib=
+-AC_MSG_CHECKING([whether stripping libraries is possible])
+-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+- AC_MSG_RESULT([yes])
+-else
+-# FIXME - insert some real tests, host_os isn't really good enough
+- case $host_os in
+- darwin*)
+- if test -n "$STRIP" ; then
+- striplib="$STRIP -x"
+- old_striplib="$STRIP -S"
+- AC_MSG_RESULT([yes])
+- else
+- AC_MSG_RESULT([no])
+- fi
+- ;;
+- *)
+- AC_MSG_RESULT([no])
+- ;;
+- esac
+-fi
+-_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+-_LT_DECL([], [striplib], [1])
+-])# _LT_CMD_STRIPLIB
+-
+-
+-# _LT_SYS_DYNAMIC_LINKER([TAG])
+-# -----------------------------
+-# PORTME Fill in your ld.so characteristics
+-m4_defun([_LT_SYS_DYNAMIC_LINKER],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-m4_require([_LT_DECL_EGREP])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_DECL_OBJDUMP])dnl
+-m4_require([_LT_DECL_SED])dnl
+-AC_MSG_CHECKING([dynamic linker characteristics])
+-m4_if([$1],
+- [], [
+-if test "$GCC" = yes; then
+- case $host_os in
+- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+- *) lt_awk_arg="/^libraries:/" ;;
+- esac
+- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+- # if the path contains ";" then we assume it to be the separator
+- # otherwise default to the standard path separator (i.e. ":") - it is
+- # assumed that no part of a normal pathname contains ";" but that should
+- # okay in the real world where ";" in dirpaths is itself problematic.
+- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+- else
+- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+- fi
+- # Ok, now we have the path, separated by spaces, we can step through it
+- # and add multilib dir if necessary.
+- lt_tmp_lt_search_path_spec=
+- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+- for lt_sys_path in $lt_search_path_spec; do
+- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+- else
+- test -d "$lt_sys_path" && \
+- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+- fi
+- done
+- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+-BEGIN {RS=" "; FS="/|\n";} {
+- lt_foo="";
+- lt_count=0;
+- for (lt_i = NF; lt_i > 0; lt_i--) {
+- if ($lt_i != "" && $lt_i != ".") {
+- if ($lt_i == "..") {
+- lt_count++;
+- } else {
+- if (lt_count == 0) {
+- lt_foo="/" $lt_i lt_foo;
+- } else {
+- lt_count--;
+- }
+- }
+- }
+- }
+- if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+- if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+-}'`
+- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+-else
+- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+-fi])
+-library_names_spec=
+-libname_spec='lib$name'
+-soname_spec=
+-shrext_cmds=".so"
+-postinstall_cmds=
+-postuninstall_cmds=
+-finish_cmds=
+-finish_eval=
+-shlibpath_var=
+-shlibpath_overrides_runpath=unknown
+-version_type=none
+-dynamic_linker="$host_os ld.so"
+-sys_lib_dlsearch_path_spec="/lib /usr/lib"
+-need_lib_prefix=unknown
+-hardcode_into_libs=no
+-
+-# when you set need_version to no, make sure it does not cause -set_version
+-# flags to be left without arguments
+-need_version=unknown
+-
+-case $host_os in
+-aix3*)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+- shlibpath_var=LIBPATH
+-
+- # AIX 3 has no versioning support, so we append a major version to the name.
+- soname_spec='${libname}${release}${shared_ext}$major'
+- ;;
+-
+-aix[[4-9]]*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- hardcode_into_libs=yes
+- if test "$host_cpu" = ia64; then
+- # AIX 5 supports IA64
+- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- else
+- # With GCC up to 2.95.x, collect2 would create an import file
+- # for dependence libraries. The import file would start with
+- # the line `#! .'. This would cause the generated library to
+- # depend on `.', always an invalid library. This was fixed in
+- # development snapshots of GCC prior to 3.0.
+- case $host_os in
+- aix4 | aix4.[[01]] | aix4.[[01]].*)
+- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+- echo ' yes '
+- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+- :
+- else
+- can_build_shared=no
+- fi
+- ;;
+- esac
+- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+- # soname into executable. Probably we can add versioning support to
+- # collect2, so additional links can be useful in future.
+- if test "$aix_use_runtimelinking" = yes; then
+- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+- # instead of lib<name>.a to let people know that these are not
+- # typical AIX shared libraries.
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- else
+- # We preserve .a as extension for shared libraries through AIX4.2
+- # and later when we are not doing run time linking.
+- library_names_spec='${libname}${release}.a $libname.a'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- fi
+- shlibpath_var=LIBPATH
+- fi
+- ;;
+-
+-amigaos*)
+- case $host_cpu in
+- powerpc)
+- # Since July 2007 AmigaOS4 officially supports .so libraries.
+- # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- ;;
+- m68k)
+- library_names_spec='$libname.ixlibrary $libname.a'
+- # Create ${libname}_ixlibrary.a entries in /sys/libs.
+- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+- ;;
+- esac
+- ;;
+-
+-beos*)
+- library_names_spec='${libname}${shared_ext}'
+- dynamic_linker="$host_os ld.so"
+- shlibpath_var=LIBRARY_PATH
+- ;;
+-
+-bsdi[[45]]*)
+- version_type=linux
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+- # the default ld.so.conf also contains /usr/contrib/lib and
+- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+- # libtool to hard-code these into programs
+- ;;
+-
+-cygwin* | mingw* | pw32* | cegcc*)
+- version_type=windows
+- shrext_cmds=".dll"
+- need_version=no
+- need_lib_prefix=no
+-
+- case $GCC,$host_os in
+- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+- library_names_spec='$libname.dll.a'
+- # DLL is installed to $(libdir)/../bin by postinstall_cmds
+- postinstall_cmds='base_file=`basename \${file}`~
+- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+- dldir=$destdir/`dirname \$dlpath`~
+- test -d \$dldir || mkdir -p \$dldir~
+- $install_prog $dir/$dlname \$dldir/$dlname~
+- chmod a+x \$dldir/$dlname~
+- if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+- eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+- fi'
+- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+- dlpath=$dir/\$dldll~
+- $RM \$dlpath'
+- shlibpath_overrides_runpath=yes
+-
+- case $host_os in
+- cygwin*)
+- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+- ;;
+- mingw* | cegcc*)
+- # MinGW DLLs use traditional 'lib' prefix
+- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+- if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+- # It is most probably a Windows format PATH printed by
+- # mingw gcc, but we are running on Cygwin. Gcc prints its search
+- # path with ; separators, and with drive letters. We can handle the
+- # drive letters (cygwin fileutils understands them), so leave them,
+- # especially as we might pass files found there to a mingw objdump,
+- # which wouldn't understand a cygwinified path. Ahh.
+- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+- else
+- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+- fi
+- ;;
+- pw32*)
+- # pw32 DLLs use 'pw' prefix rather than 'lib'
+- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- ;;
+- esac
+- ;;
+-
+- *)
+- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+- ;;
+- esac
+- dynamic_linker='Win32 ld.exe'
+- # FIXME: first we should search . and the directory the executable is in
+- shlibpath_var=PATH
+- ;;
+-
+-darwin* | rhapsody*)
+- dynamic_linker="$host_os dyld"
+- version_type=darwin
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+- soname_spec='${libname}${release}${major}$shared_ext'
+- shlibpath_overrides_runpath=yes
+- shlibpath_var=DYLD_LIBRARY_PATH
+- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+-m4_if([$1], [],[
+- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+- ;;
+-
+-dgux*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- ;;
+-
+-freebsd1*)
+- dynamic_linker=no
+- ;;
+-
+-freebsd* | dragonfly*)
+- # DragonFly does not have aout. When/if they implement a new
+- # versioning mechanism, adjust this.
+- if test -x /usr/bin/objformat; then
+- objformat=`/usr/bin/objformat`
+- else
+- case $host_os in
+- freebsd[[123]]*) objformat=aout ;;
+- *) objformat=elf ;;
+- esac
+- fi
+- version_type=freebsd-$objformat
+- case $version_type in
+- freebsd-elf*)
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+- need_version=no
+- need_lib_prefix=no
+- ;;
+- freebsd-*)
+- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+- need_version=yes
+- ;;
+- esac
+- shlibpath_var=LD_LIBRARY_PATH
+- case $host_os in
+- freebsd2*)
+- shlibpath_overrides_runpath=yes
+- ;;
+- freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- ;;
+- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- ;;
+- *) # from 4.6 on, and DragonFly
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- ;;
+- esac
+- ;;
+-
+-gnu*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- hardcode_into_libs=yes
+- ;;
+-
+-hpux9* | hpux10* | hpux11*)
+- # Give a soname corresponding to the major version so that dld.sl refuses to
+- # link against other versions.
+- version_type=sunos
+- need_lib_prefix=no
+- need_version=no
+- case $host_cpu in
+- ia64*)
+- shrext_cmds='.so'
+- hardcode_into_libs=yes
+- dynamic_linker="$host_os dld.so"
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- if test "X$HPUX_IA64_MODE" = X32; then
+- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+- else
+- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+- fi
+- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+- ;;
+- hppa*64*)
+- shrext_cmds='.sl'
+- hardcode_into_libs=yes
+- dynamic_linker="$host_os dld.sl"
+- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+- ;;
+- *)
+- shrext_cmds='.sl'
+- dynamic_linker="$host_os dld.sl"
+- shlibpath_var=SHLIB_PATH
+- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- ;;
+- esac
+- # HP-UX runs *really* slowly unless shared libraries are mode 555.
+- postinstall_cmds='chmod 555 $lib'
+- ;;
+-
+-interix[[3-9]]*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- ;;
+-
+-irix5* | irix6* | nonstopux*)
+- case $host_os in
+- nonstopux*) version_type=nonstopux ;;
+- *)
+- if test "$lt_cv_prog_gnu_ld" = yes; then
+- version_type=linux
+- else
+- version_type=irix
+- fi ;;
+- esac
+- need_lib_prefix=no
+- need_version=no
+- soname_spec='${libname}${release}${shared_ext}$major'
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+- case $host_os in
+- irix5* | nonstopux*)
+- libsuff= shlibsuff=
+- ;;
+- *)
+- case $LD in # libtool.m4 will add one of these switches to LD
+- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+- libsuff= shlibsuff= libmagic=32-bit;;
+- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+- libsuff=32 shlibsuff=N32 libmagic=N32;;
+- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+- libsuff=64 shlibsuff=64 libmagic=64-bit;;
+- *) libsuff= shlibsuff= libmagic=never-match;;
+- esac
+- ;;
+- esac
+- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+- shlibpath_overrides_runpath=no
+- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+- hardcode_into_libs=yes
+- ;;
+-
+-# No shared lib support for Linux oldld, aout, or coff.
+-linux*oldld* | linux*aout* | linux*coff*)
+- dynamic_linker=no
+- ;;
+-
+-# This must be Linux ELF.
+-linux* | k*bsd*-gnu)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- # Some binutils ld are patched to set DT_RUNPATH
+- save_LDFLAGS=$LDFLAGS
+- save_libdir=$libdir
+- eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+- LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+- [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+- [shlibpath_overrides_runpath=yes])])
+- LDFLAGS=$save_LDFLAGS
+- libdir=$save_libdir
+-
+- # This implies no fast_install, which is unacceptable.
+- # Some rework will be needed to allow for fast_install
+- # before this can be enabled.
+- hardcode_into_libs=yes
+-
+- # Append ld.so.conf contents to the search path
+- if test -f /etc/ld.so.conf; then
+- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+- fi
+-
+- # We used to test for /lib/ld.so.1 and disable shared libraries on
+- # powerpc, because MkLinux only supported shared libraries with the
+- # GNU dynamic linker. Since this was broken with cross compilers,
+- # most powerpc-linux boxes support dynamic linking these days and
+- # people can always --disable-shared, the test was removed, and we
+- # assume the GNU/Linux dynamic linker is in use.
+- dynamic_linker='GNU/Linux ld.so'
+- ;;
+-
+-netbsd*)
+- version_type=sunos
+- need_lib_prefix=no
+- need_version=no
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+- dynamic_linker='NetBSD (a.out) ld.so'
+- else
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- dynamic_linker='NetBSD ld.elf_so'
+- fi
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- ;;
+-
+-newsos6)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- ;;
+-
+-*nto* | *qnx*)
+- version_type=qnx
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- dynamic_linker='ldqnx.so'
+- ;;
+-
+-openbsd*)
+- version_type=sunos
+- sys_lib_dlsearch_path_spec="/usr/lib"
+- need_lib_prefix=no
+- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+- case $host_os in
+- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+- *) need_version=no ;;
+- esac
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- case $host_os in
+- openbsd2.[[89]] | openbsd2.[[89]].*)
+- shlibpath_overrides_runpath=no
+- ;;
+- *)
+- shlibpath_overrides_runpath=yes
+- ;;
+- esac
+- else
+- shlibpath_overrides_runpath=yes
+- fi
+- ;;
+-
+-os2*)
+- libname_spec='$name'
+- shrext_cmds=".dll"
+- need_lib_prefix=no
+- library_names_spec='$libname${shared_ext} $libname.a'
+- dynamic_linker='OS/2 ld.exe'
+- shlibpath_var=LIBPATH
+- ;;
+-
+-osf3* | osf4* | osf5*)
+- version_type=osf
+- need_lib_prefix=no
+- need_version=no
+- soname_spec='${libname}${release}${shared_ext}$major'
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+- ;;
+-
+-rdos*)
+- dynamic_linker=no
+- ;;
+-
+-solaris*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- # ldd complains unless libraries are executable
+- postinstall_cmds='chmod +x $lib'
+- ;;
+-
+-sunos4*)
+- version_type=sunos
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- if test "$with_gnu_ld" = yes; then
+- need_lib_prefix=no
+- fi
+- need_version=yes
+- ;;
+-
+-sysv4 | sysv4.3*)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- case $host_vendor in
+- sni)
+- shlibpath_overrides_runpath=no
+- need_lib_prefix=no
+- runpath_var=LD_RUN_PATH
+- ;;
+- siemens)
+- need_lib_prefix=no
+- ;;
+- motorola)
+- need_lib_prefix=no
+- need_version=no
+- shlibpath_overrides_runpath=no
+- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+- ;;
+- esac
+- ;;
+-
+-sysv4*MP*)
+- if test -d /usr/nec ;then
+- version_type=linux
+- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+- soname_spec='$libname${shared_ext}.$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- fi
+- ;;
+-
+-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+- version_type=freebsd-elf
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- if test "$with_gnu_ld" = yes; then
+- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+- else
+- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+- case $host_os in
+- sco3.2v5*)
+- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+- ;;
+- esac
+- fi
+- sys_lib_dlsearch_path_spec='/usr/lib'
+- ;;
+-
+-tpf*)
+- # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- ;;
+-
+-uts4*)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- ;;
+-
+-*)
+- dynamic_linker=no
+- ;;
+-esac
+-AC_MSG_RESULT([$dynamic_linker])
+-test "$dynamic_linker" = no && can_build_shared=no
+-
+-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+-if test "$GCC" = yes; then
+- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+-fi
+-
+-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+-fi
+-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+-fi
+-
+-_LT_DECL([], [variables_saved_for_relink], [1],
+- [Variables whose values should be saved in libtool wrapper scripts and
+- restored at link time])
+-_LT_DECL([], [need_lib_prefix], [0],
+- [Do we need the "lib" prefix for modules?])
+-_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+-_LT_DECL([], [version_type], [0], [Library versioning type])
+-_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
+-_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+-_LT_DECL([], [shlibpath_overrides_runpath], [0],
+- [Is shlibpath searched before the hard-coded library search path?])
+-_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+-_LT_DECL([], [library_names_spec], [1],
+- [[List of archive names. First name is the real one, the rest are links.
+- The last name is the one that the linker finds with -lNAME]])
+-_LT_DECL([], [soname_spec], [1],
+- [[The coded name of the library, if different from the real name]])
+-_LT_DECL([], [postinstall_cmds], [2],
+- [Command to use after installation of a shared archive])
+-_LT_DECL([], [postuninstall_cmds], [2],
+- [Command to use after uninstallation of a shared archive])
+-_LT_DECL([], [finish_cmds], [2],
+- [Commands used to finish a libtool library installation in a directory])
+-_LT_DECL([], [finish_eval], [1],
+- [[As "finish_cmds", except a single script fragment to be evaled but
+- not shown]])
+-_LT_DECL([], [hardcode_into_libs], [0],
+- [Whether we should hardcode library paths into libraries])
+-_LT_DECL([], [sys_lib_search_path_spec], [2],
+- [Compile-time system search path for libraries])
+-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+- [Run-time system search path for libraries])
+-])# _LT_SYS_DYNAMIC_LINKER
+-
+-
+-# _LT_PATH_TOOL_PREFIX(TOOL)
+-# --------------------------
+-# find a file program which can recognize shared library
+-AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+-[m4_require([_LT_DECL_EGREP])dnl
+-AC_MSG_CHECKING([for $1])
+-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+-[case $MAGIC_CMD in
+-[[\\/*] | ?:[\\/]*])
+- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+- ;;
+-*)
+- lt_save_MAGIC_CMD="$MAGIC_CMD"
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+-dnl $ac_dummy forces splitting on constant user-supplied paths.
+-dnl POSIX.2 word splitting is done only on the output of word expansions,
+-dnl not every word. This closes a longstanding sh security hole.
+- ac_dummy="m4_if([$2], , $PATH, [$2])"
+- for ac_dir in $ac_dummy; do
+- IFS="$lt_save_ifs"
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$1; then
+- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+- if test -n "$file_magic_test_file"; then
+- case $deplibs_check_method in
+- "file_magic "*)
+- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+- $EGREP "$file_magic_regex" > /dev/null; then
+- :
+- else
+- cat <<_LT_EOF 1>&2
+-
+-*** Warning: the command libtool uses to detect shared libraries,
+-*** $file_magic_cmd, produces output that libtool cannot recognize.
+-*** The result is that libtool may fail to recognize shared libraries
+-*** as such. This will affect the creation of libtool libraries that
+-*** depend on shared libraries, but programs linked with such libtool
+-*** libraries will work regardless of this problem. Nevertheless, you
+-*** may want to report the problem to your system manager and/or to
+-*** bug-libtool@gnu.org
+-
+-_LT_EOF
+- fi ;;
+- esac
+- fi
+- break
+- fi
+- done
+- IFS="$lt_save_ifs"
+- MAGIC_CMD="$lt_save_MAGIC_CMD"
+- ;;
+-esac])
+-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+-if test -n "$MAGIC_CMD"; then
+- AC_MSG_RESULT($MAGIC_CMD)
+-else
+- AC_MSG_RESULT(no)
+-fi
+-_LT_DECL([], [MAGIC_CMD], [0],
+- [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+-])# _LT_PATH_TOOL_PREFIX
+-
+-# Old name:
+-AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+-
+-
+-# _LT_PATH_MAGIC
+-# --------------
+-# find a file program which can recognize a shared library
+-m4_defun([_LT_PATH_MAGIC],
+-[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+-if test -z "$lt_cv_path_MAGIC_CMD"; then
+- if test -n "$ac_tool_prefix"; then
+- _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+- else
+- MAGIC_CMD=:
+- fi
+-fi
+-])# _LT_PATH_MAGIC
+-
+-
+-# LT_PATH_LD
+-# ----------
+-# find the pathname to the GNU or non-GNU linker
+-AC_DEFUN([LT_PATH_LD],
+-[AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+-m4_require([_LT_DECL_SED])dnl
+-m4_require([_LT_DECL_EGREP])dnl
+-
+-AC_ARG_WITH([gnu-ld],
+- [AS_HELP_STRING([--with-gnu-ld],
+- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+- [test "$withval" = no || with_gnu_ld=yes],
+- [with_gnu_ld=no])dnl
+-
+-ac_prog=ld
+-if test "$GCC" = yes; then
+- # Check if gcc -print-prog-name=ld gives a path.
+- AC_MSG_CHECKING([for ld used by $CC])
+- case $host in
+- *-*-mingw*)
+- # gcc leaves a trailing carriage return which upsets mingw
+- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+- *)
+- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+- esac
+- case $ac_prog in
+- # Accept absolute paths.
+- [[\\/]]* | ?:[[\\/]]*)
+- re_direlt='/[[^/]][[^/]]*/\.\./'
+- # Canonicalize the pathname of ld
+- ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+- ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+- done
+- test -z "$LD" && LD="$ac_prog"
+- ;;
+- "")
+- # If it fails, then pretend we aren't using GCC.
+- ac_prog=ld
+- ;;
+- *)
+- # If it is relative, then search for the first ld in PATH.
+- with_gnu_ld=unknown
+- ;;
+- esac
+-elif test "$with_gnu_ld" = yes; then
+- AC_MSG_CHECKING([for GNU ld])
+-else
+- AC_MSG_CHECKING([for non-GNU ld])
+-fi
+-AC_CACHE_VAL(lt_cv_path_LD,
+-[if test -z "$LD"; then
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for ac_dir in $PATH; do
+- IFS="$lt_save_ifs"
+- test -z "$ac_dir" && ac_dir=.
+- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+- lt_cv_path_LD="$ac_dir/$ac_prog"
+- # Check to see if the program is GNU ld. I'd rather use --version,
+- # but apparently some variants of GNU ld only accept -v.
+- # Break only if it was the GNU/non-GNU ld that we prefer.
+- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+- *GNU* | *'with BFD'*)
+- test "$with_gnu_ld" != no && break
+- ;;
+- *)
+- test "$with_gnu_ld" != yes && break
+- ;;
+- esac
+- fi
+- done
+- IFS="$lt_save_ifs"
+-else
+- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+-fi])
+-LD="$lt_cv_path_LD"
+-if test -n "$LD"; then
+- AC_MSG_RESULT($LD)
+-else
+- AC_MSG_RESULT(no)
+-fi
+-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+-_LT_PATH_LD_GNU
+-AC_SUBST([LD])
+-
+-_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+-])# LT_PATH_LD
+-
+-# Old names:
+-AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+-AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AM_PROG_LD], [])
+-dnl AC_DEFUN([AC_PROG_LD], [])
+-
+-
+-# _LT_PATH_LD_GNU
+-#- --------------
+-m4_defun([_LT_PATH_LD_GNU],
+-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+-case `$LD -v 2>&1 </dev/null` in
+-*GNU* | *'with BFD'*)
+- lt_cv_prog_gnu_ld=yes
+- ;;
+-*)
+- lt_cv_prog_gnu_ld=no
+- ;;
+-esac])
+-with_gnu_ld=$lt_cv_prog_gnu_ld
+-])# _LT_PATH_LD_GNU
+-
+-
+-# _LT_CMD_RELOAD
+-# --------------
+-# find reload flag for linker
+-# -- PORTME Some linkers may need a different reload flag.
+-m4_defun([_LT_CMD_RELOAD],
+-[AC_CACHE_CHECK([for $LD option to reload object files],
+- lt_cv_ld_reload_flag,
+- [lt_cv_ld_reload_flag='-r'])
+-reload_flag=$lt_cv_ld_reload_flag
+-case $reload_flag in
+-"" | " "*) ;;
+-*) reload_flag=" $reload_flag" ;;
+-esac
+-reload_cmds='$LD$reload_flag -o $output$reload_objs'
+-case $host_os in
+- darwin*)
+- if test "$GCC" = yes; then
+- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+- else
+- reload_cmds='$LD$reload_flag -o $output$reload_objs'
+- fi
+- ;;
+-esac
+-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+-_LT_DECL([], [reload_cmds], [2])dnl
+-])# _LT_CMD_RELOAD
+-
+-
+-# _LT_CHECK_MAGIC_METHOD
+-# ----------------------
+-# how to check for library dependencies
+-# -- PORTME fill in with the dynamic library characteristics
+-m4_defun([_LT_CHECK_MAGIC_METHOD],
+-[m4_require([_LT_DECL_EGREP])
+-m4_require([_LT_DECL_OBJDUMP])
+-AC_CACHE_CHECK([how to recognize dependent libraries],
+-lt_cv_deplibs_check_method,
+-[lt_cv_file_magic_cmd='$MAGIC_CMD'
+-lt_cv_file_magic_test_file=
+-lt_cv_deplibs_check_method='unknown'
+-# Need to set the preceding variable on all platforms that support
+-# interlibrary dependencies.
+-# 'none' -- dependencies not supported.
+-# `unknown' -- same as none, but documents that we really don't know.
+-# 'pass_all' -- all dependencies passed with no checks.
+-# 'test_compile' -- check by making test program.
+-# 'file_magic [[regex]]' -- check by looking for files in library path
+-# which responds to the $file_magic_cmd with a given extended regex.
+-# If you have `file' or equivalent on your system and you're not sure
+-# whether `pass_all' will *always* work, you probably want this one.
+-
+-case $host_os in
+-aix[[4-9]]*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-beos*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-bsdi[[45]]*)
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+- lt_cv_file_magic_cmd='/usr/bin/file -L'
+- lt_cv_file_magic_test_file=/shlib/libc.so
+- ;;
+-
+-cygwin*)
+- # func_win32_libid is a shell function defined in ltmain.sh
+- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+- lt_cv_file_magic_cmd='func_win32_libid'
+- ;;
+-
+-mingw* | pw32*)
+- # Base MSYS/MinGW do not provide the 'file' command needed by
+- # func_win32_libid shell function, so use a weaker test based on 'objdump',
+- # unless we find 'file', for example because we are cross-compiling.
+- if ( file / ) >/dev/null 2>&1; then
+- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+- lt_cv_file_magic_cmd='func_win32_libid'
+- else
+- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+- lt_cv_file_magic_cmd='$OBJDUMP -f'
+- fi
+- ;;
+-
+-cegcc)
+- # use the weaker test based on 'objdump'. See mingw*.
+- lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+- lt_cv_file_magic_cmd='$OBJDUMP -f'
+- ;;
+-
+-darwin* | rhapsody*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-freebsd* | dragonfly*)
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+- case $host_cpu in
+- i*86 )
+- # Not sure whether the presence of OpenBSD here was a mistake.
+- # Let's accept both of them until this is cleared up.
+- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+- lt_cv_file_magic_cmd=/usr/bin/file
+- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+- ;;
+- esac
+- else
+- lt_cv_deplibs_check_method=pass_all
+- fi
+- ;;
+-
+-gnu*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-hpux10.20* | hpux11*)
+- lt_cv_file_magic_cmd=/usr/bin/file
+- case $host_cpu in
+- ia64*)
+- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+- ;;
+- hppa*64*)
+- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+- ;;
+- *)
+- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+- lt_cv_file_magic_test_file=/usr/lib/libc.sl
+- ;;
+- esac
+- ;;
+-
+-interix[[3-9]]*)
+- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+- ;;
+-
+-irix5* | irix6* | nonstopux*)
+- case $LD in
+- *-32|*"-32 ") libmagic=32-bit;;
+- *-n32|*"-n32 ") libmagic=N32;;
+- *-64|*"-64 ") libmagic=64-bit;;
+- *) libmagic=never-match;;
+- esac
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-# This must be Linux ELF.
+-linux* | k*bsd*-gnu)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-netbsd*)
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+- else
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+- fi
+- ;;
+-
+-newos6*)
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+- lt_cv_file_magic_cmd=/usr/bin/file
+- lt_cv_file_magic_test_file=/usr/lib/libnls.so
+- ;;
+-
+-*nto* | *qnx*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-openbsd*)
+- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+- else
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+- fi
+- ;;
+-
+-osf3* | osf4* | osf5*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-rdos*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-solaris*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-sysv4 | sysv4.3*)
+- case $host_vendor in
+- motorola)
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+- ;;
+- ncr)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+- sequent)
+- lt_cv_file_magic_cmd='/bin/file'
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+- ;;
+- sni)
+- lt_cv_file_magic_cmd='/bin/file'
+- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+- lt_cv_file_magic_test_file=/lib/libc.so
+- ;;
+- siemens)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+- pc)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+- esac
+- ;;
+-
+-tpf*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-esac
+-])
+-file_magic_cmd=$lt_cv_file_magic_cmd
+-deplibs_check_method=$lt_cv_deplibs_check_method
+-test -z "$deplibs_check_method" && deplibs_check_method=unknown
+-
+-_LT_DECL([], [deplibs_check_method], [1],
+- [Method to check whether dependent libraries are shared objects])
+-_LT_DECL([], [file_magic_cmd], [1],
+- [Command to use when deplibs_check_method == "file_magic"])
+-])# _LT_CHECK_MAGIC_METHOD
+-
+-
+-# LT_PATH_NM
+-# ----------
+-# find the pathname to a BSD- or MS-compatible name lister
+-AC_DEFUN([LT_PATH_NM],
+-[AC_REQUIRE([AC_PROG_CC])dnl
+-AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+-[if test -n "$NM"; then
+- # Let the user override the test.
+- lt_cv_path_NM="$NM"
+-else
+- lt_nm_to_check="${ac_tool_prefix}nm"
+- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+- lt_nm_to_check="$lt_nm_to_check nm"
+- fi
+- for lt_tmp_nm in $lt_nm_to_check; do
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+- IFS="$lt_save_ifs"
+- test -z "$ac_dir" && ac_dir=.
+- tmp_nm="$ac_dir/$lt_tmp_nm"
+- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+- # Check to see if the nm accepts a BSD-compat flag.
+- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+- # nm: unknown option "B" ignored
+- # Tru64's nm complains that /dev/null is an invalid object file
+- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+- */dev/null* | *'Invalid file or object type'*)
+- lt_cv_path_NM="$tmp_nm -B"
+- break
+- ;;
+- *)
+- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+- */dev/null*)
+- lt_cv_path_NM="$tmp_nm -p"
+- break
+- ;;
+- *)
+- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+- continue # so that we can try to find one that supports BSD flags
+- ;;
+- esac
+- ;;
+- esac
+- fi
+- done
+- IFS="$lt_save_ifs"
+- done
+- : ${lt_cv_path_NM=no}
+-fi])
+-if test "$lt_cv_path_NM" != "no"; then
+- NM="$lt_cv_path_NM"
+-else
+- # Didn't find any BSD compatible name lister, look for dumpbin.
+- AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+- AC_SUBST([DUMPBIN])
+- if test "$DUMPBIN" != ":"; then
+- NM="$DUMPBIN"
+- fi
+-fi
+-test -z "$NM" && NM=nm
+-AC_SUBST([NM])
+-_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+-
+-AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+- [lt_cv_nm_interface="BSD nm"
+- echo "int some_variable = 0;" > conftest.$ac_ext
+- (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+- (eval "$ac_compile" 2>conftest.err)
+- cat conftest.err >&AS_MESSAGE_LOG_FD
+- (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+- (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+- cat conftest.err >&AS_MESSAGE_LOG_FD
+- (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+- cat conftest.out >&AS_MESSAGE_LOG_FD
+- if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+- lt_cv_nm_interface="MS dumpbin"
+- fi
+- rm -f conftest*])
+-])# LT_PATH_NM
+-
+-# Old names:
+-AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+-AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AM_PROG_NM], [])
+-dnl AC_DEFUN([AC_PROG_NM], [])
+-
+-
+-# LT_LIB_M
+-# --------
+-# check for math library
+-AC_DEFUN([LT_LIB_M],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-LIBM=
+-case $host in
+-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+- # These system don't have libm, or don't need it
+- ;;
+-*-ncr-sysv4.3*)
+- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+- ;;
+-*)
+- AC_CHECK_LIB(m, cos, LIBM="-lm")
+- ;;
+-esac
+-AC_SUBST([LIBM])
+-])# LT_LIB_M
+-
+-# Old name:
+-AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_CHECK_LIBM], [])
+-
+-
+-# _LT_COMPILER_NO_RTTI([TAGNAME])
+-# -------------------------------
+-m4_defun([_LT_COMPILER_NO_RTTI],
+-[m4_require([_LT_TAG_COMPILER])dnl
+-
+-_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+-
+-if test "$GCC" = yes; then
+- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+-
+- _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+- lt_cv_prog_compiler_rtti_exceptions,
+- [-fno-rtti -fno-exceptions], [],
+- [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+-fi
+-_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+- [Compiler flag to turn off builtin functions])
+-])# _LT_COMPILER_NO_RTTI
+-
+-
+-# _LT_CMD_GLOBAL_SYMBOLS
+-# ----------------------
+-m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([LT_PATH_NM])dnl
+-AC_REQUIRE([LT_PATH_LD])dnl
+-m4_require([_LT_DECL_SED])dnl
+-m4_require([_LT_DECL_EGREP])dnl
+-m4_require([_LT_TAG_COMPILER])dnl
+-
+-# Check for command to grab the raw symbol name followed by C symbol from nm.
+-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+-[
+-# These are sane defaults that work on at least a few old systems.
+-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+-
+-# Character class describing NM global symbol codes.
+-symcode='[[BCDEGRST]]'
+-
+-# Regexp to match symbols that can be accessed directly from C.
+-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+-
+-# Define system-specific variables.
+-case $host_os in
+-aix*)
+- symcode='[[BCDT]]'
+- ;;
+-cygwin* | mingw* | pw32* | cegcc*)
+- symcode='[[ABCDGISTW]]'
+- ;;
+-hpux*)
+- if test "$host_cpu" = ia64; then
+- symcode='[[ABCDEGRST]]'
+- fi
+- ;;
+-irix* | nonstopux*)
+- symcode='[[BCDEGRST]]'
+- ;;
+-osf*)
+- symcode='[[BCDEGQRST]]'
+- ;;
+-solaris*)
+- symcode='[[BDRT]]'
+- ;;
+-sco3.2v5*)
+- symcode='[[DT]]'
+- ;;
+-sysv4.2uw2*)
+- symcode='[[DT]]'
+- ;;
+-sysv5* | sco5v6* | unixware* | OpenUNIX*)
+- symcode='[[ABDT]]'
+- ;;
+-sysv4)
+- symcode='[[DFNSTU]]'
+- ;;
+-esac
+-
+-# If we're using GNU nm, then use its standard symbol codes.
+-case `$NM -V 2>&1` in
+-*GNU* | *'with BFD'*)
+- symcode='[[ABCDGIRSTW]]' ;;
+-esac
+-
+-# Transform an extracted symbol line into a proper C declaration.
+-# Some systems (esp. on ia64) link data and code symbols differently,
+-# so use this general approach.
+-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+-
+-# Transform an extracted symbol line into symbol name and symbol address
+-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+-
+-# Handle CRLF in mingw tool chain
+-opt_cr=
+-case $build_os in
+-mingw*)
+- opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+- ;;
+-esac
+-
+-# Try without a prefix underscore, then with it.
+-for ac_symprfx in "" "_"; do
+-
+- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+- symxfrm="\\1 $ac_symprfx\\2 \\2"
+-
+- # Write the raw and C identifiers.
+- if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+- # Fake it for dumpbin and say T for any non-static function
+- # and D for any global variable.
+- # Also find C++ and __fastcall symbols from MSVC++,
+- # which start with @ or ?.
+- lt_cv_sys_global_symbol_pipe="$AWK ['"\
+-" {last_section=section; section=\$ 3};"\
+-" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+-" \$ 0!~/External *\|/{next};"\
+-" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+-" {if(hide[section]) next};"\
+-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+-" ' prfx=^$ac_symprfx]"
+- else
+- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+- fi
+-
+- # Check to see that the pipe works correctly.
+- pipe_works=no
+-
+- rm -f conftest*
+- cat > conftest.$ac_ext <<_LT_EOF
+-#ifdef __cplusplus
+-extern "C" {
+-#endif
+-char nm_test_var;
+-void nm_test_func(void);
+-void nm_test_func(void){}
+-#ifdef __cplusplus
+-}
+-#endif
+-int main(){nm_test_var='a';nm_test_func();return(0);}
+-_LT_EOF
+-
+- if AC_TRY_EVAL(ac_compile); then
+- # Now try to grab the symbols.
+- nlist=conftest.nm
+- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+- # Try sorting and uniquifying the output.
+- if sort "$nlist" | uniq > "$nlist"T; then
+- mv -f "$nlist"T "$nlist"
+- else
+- rm -f "$nlist"T
+- fi
+-
+- # Make sure that we snagged all the symbols we need.
+- if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+- if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+- cat <<_LT_EOF > conftest.$ac_ext
+-#ifdef __cplusplus
+-extern "C" {
+-#endif
+-
+-_LT_EOF
+- # Now generate the symbol file.
+- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+-
+- cat <<_LT_EOF >> conftest.$ac_ext
+-
+-/* The mapping between symbol names and symbols. */
+-const struct {
+- const char *name;
+- void *address;
+-}
+-lt__PROGRAM__LTX_preloaded_symbols[[]] =
+-{
+- { "@PROGRAM@", (void *) 0 },
+-_LT_EOF
+- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+- cat <<\_LT_EOF >> conftest.$ac_ext
+- {0, (void *) 0}
+-};
+-
+-/* This works around a problem in FreeBSD linker */
+-#ifdef FREEBSD_WORKAROUND
+-static const void *lt_preloaded_setup() {
+- return lt__PROGRAM__LTX_preloaded_symbols;
+-}
+-#endif
+-
+-#ifdef __cplusplus
+-}
+-#endif
+-_LT_EOF
+- # Now try linking the two files.
+- mv conftest.$ac_objext conftstm.$ac_objext
+- lt_save_LIBS="$LIBS"
+- lt_save_CFLAGS="$CFLAGS"
+- LIBS="conftstm.$ac_objext"
+- CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+- pipe_works=yes
+- fi
+- LIBS="$lt_save_LIBS"
+- CFLAGS="$lt_save_CFLAGS"
+- else
+- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+- fi
+- else
+- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+- fi
+- else
+- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+- fi
+- else
+- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+- cat conftest.$ac_ext >&5
+- fi
+- rm -rf conftest* conftst*
+-
+- # Do not use the global_symbol_pipe unless it works.
+- if test "$pipe_works" = yes; then
+- break
+- else
+- lt_cv_sys_global_symbol_pipe=
+- fi
+-done
+-])
+-if test -z "$lt_cv_sys_global_symbol_pipe"; then
+- lt_cv_sys_global_symbol_to_cdecl=
+-fi
+-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+- AC_MSG_RESULT(failed)
+-else
+- AC_MSG_RESULT(ok)
+-fi
+-
+-_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+- [Take the output of nm and produce a listing of raw symbols and C names])
+-_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+- [Transform the output of nm in a proper C declaration])
+-_LT_DECL([global_symbol_to_c_name_address],
+- [lt_cv_sys_global_symbol_to_c_name_address], [1],
+- [Transform the output of nm in a C name address pair])
+-_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+- [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+- [Transform the output of nm in a C name address pair when lib prefix is needed])
+-]) # _LT_CMD_GLOBAL_SYMBOLS
+-
+-
+-# _LT_COMPILER_PIC([TAGNAME])
+-# ---------------------------
+-m4_defun([_LT_COMPILER_PIC],
+-[m4_require([_LT_TAG_COMPILER])dnl
+-_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+-_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+-_LT_TAGVAR(lt_prog_compiler_static, $1)=
+-
+-AC_MSG_CHECKING([for $compiler option to produce PIC])
+-m4_if([$1], [CXX], [
+- # C++ specific cases for pic, static, wl, etc.
+- if test "$GXX" = yes; then
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+-
+- case $host_os in
+- aix*)
+- # All AIX code is PIC.
+- if test "$host_cpu" = ia64; then
+- # AIX 5 now supports IA64 processor
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- fi
+- ;;
+-
+- amigaos*)
+- case $host_cpu in
+- powerpc)
+- # see comment about AmigaOS4 .so support
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- m68k)
+- # FIXME: we need at least 68020 code to build shared libraries, but
+- # adding the `-m68020' flag to GCC prevents building anything better,
+- # like `-m68040'.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+- ;;
+- esac
+- ;;
+-
+- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+- # PIC is the default for these OSes.
+- ;;
+- mingw* | cygwin* | os2* | pw32* | cegcc*)
+- # This hack is so that the source file can tell whether it is being
+- # built for inclusion in a dll (and should export symbols for example).
+- # Although the cygwin gcc ignores -fPIC, still need this for old-style
+- # (--disable-auto-import) libraries
+- m4_if([$1], [GCJ], [],
+- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+- ;;
+- darwin* | rhapsody*)
+- # PIC is the default on this platform
+- # Common symbols not allowed in MH_DYLIB files
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+- ;;
+- *djgpp*)
+- # DJGPP does not support shared libraries at all
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+- ;;
+- interix[[3-9]]*)
+- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+- # Instead, we relocate shared libraries at runtime.
+- ;;
+- sysv4*MP*)
+- if test -d /usr/nec; then
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+- fi
+- ;;
+- hpux*)
+- # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+- # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+- # sets the default TLS model and affects inlining.
+- case $host_cpu in
+- hppa*64*)
+- ;;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- esac
+- ;;
+- *qnx* | *nto*)
+- # QNX uses GNU C++, but need to define -shared option too, otherwise
+- # it will coredump.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+- ;;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- esac
+- else
+- case $host_os in
+- aix[[4-9]]*)
+- # All AIX code is PIC.
+- if test "$host_cpu" = ia64; then
+- # AIX 5 now supports IA64 processor
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- else
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+- fi
+- ;;
+- chorus*)
+- case $cc_basename in
+- cxch68*)
+- # Green Hills C++ Compiler
+- # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+- ;;
+- esac
+- ;;
+- dgux*)
+- case $cc_basename in
+- ec++*)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- ;;
+- ghcx*)
+- # Green Hills C++ Compiler
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- freebsd* | dragonfly*)
+- # FreeBSD uses GNU C++
+- ;;
+- hpux9* | hpux10* | hpux11*)
+- case $cc_basename in
+- CC*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+- if test "$host_cpu" != ia64; then
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+- fi
+- ;;
+- aCC*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+- case $host_cpu in
+- hppa*64*|ia64*)
+- # +Z the default
+- ;;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+- ;;
+- esac
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- interix*)
+- # This is c89, which is MS Visual C++ (no shared libs)
+- # Anyone wants to do a port?
+- ;;
+- irix5* | irix6* | nonstopux*)
+- case $cc_basename in
+- CC*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- # CC pic flag -KPIC is the default.
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- linux* | k*bsd*-gnu)
+- case $cc_basename in
+- KCC*)
+- # KAI C++ Compiler
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- ecpc* )
+- # old Intel C++ for x86_64 which still supported -KPIC.
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+- ;;
+- icpc* )
+- # Intel C++, used to be incompatible with GCC.
+- # ICC 10 doesn't accept -KPIC any more.
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+- ;;
+- pgCC* | pgcpp*)
+- # Portland Group C++ compiler
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+- cxx*)
+- # Compaq C++
+- # Make sure the PIC flag is empty. It appears that all Alpha
+- # Linux and Compaq Tru64 Unix objects are PIC.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+- xlc* | xlC*)
+- # IBM XL 8.0 on PPC
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+- ;;
+- *)
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C++ 5.9
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+- ;;
+- esac
+- ;;
+- esac
+- ;;
+- lynxos*)
+- ;;
+- m88k*)
+- ;;
+- mvs*)
+- case $cc_basename in
+- cxx*)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- netbsd*)
+- ;;
+- *qnx* | *nto*)
+- # QNX uses GNU C++, but need to define -shared option too, otherwise
+- # it will coredump.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+- ;;
+- osf3* | osf4* | osf5*)
+- case $cc_basename in
+- KCC*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+- ;;
+- RCC*)
+- # Rational C++ 2.4.1
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+- ;;
+- cxx*)
+- # Digital/Compaq C++
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- # Make sure the PIC flag is empty. It appears that all Alpha
+- # Linux and Compaq Tru64 Unix objects are PIC.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- psos*)
+- ;;
+- solaris*)
+- case $cc_basename in
+- CC*)
+- # Sun C++ 4.2, 5.x and Centerline C++
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+- ;;
+- gcx*)
+- # Green Hills C++ Compiler
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- sunos4*)
+- case $cc_basename in
+- CC*)
+- # Sun C++ 4.x
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+- lcc*)
+- # Lucid
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+- case $cc_basename in
+- CC*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+- esac
+- ;;
+- tandem*)
+- case $cc_basename in
+- NCC*)
+- # NonStop-UX NCC 3.20
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- vxworks*)
+- ;;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+- ;;
+- esac
+- fi
+-],
+-[
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+-
+- case $host_os in
+- aix*)
+- # All AIX code is PIC.
+- if test "$host_cpu" = ia64; then
+- # AIX 5 now supports IA64 processor
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- fi
+- ;;
+-
+- amigaos*)
+- case $host_cpu in
+- powerpc)
+- # see comment about AmigaOS4 .so support
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- m68k)
+- # FIXME: we need at least 68020 code to build shared libraries, but
+- # adding the `-m68020' flag to GCC prevents building anything better,
+- # like `-m68040'.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+- ;;
+- esac
+- ;;
+-
+- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+- # PIC is the default for these OSes.
+- ;;
+-
+- mingw* | cygwin* | pw32* | os2* | cegcc*)
+- # This hack is so that the source file can tell whether it is being
+- # built for inclusion in a dll (and should export symbols for example).
+- # Although the cygwin gcc ignores -fPIC, still need this for old-style
+- # (--disable-auto-import) libraries
+- m4_if([$1], [GCJ], [],
+- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+- ;;
+-
+- darwin* | rhapsody*)
+- # PIC is the default on this platform
+- # Common symbols not allowed in MH_DYLIB files
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+- ;;
+-
+- hpux*)
+- # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+- # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+- # sets the default TLS model and affects inlining.
+- case $host_cpu in
+- hppa*64*)
+- # +Z the default
+- ;;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- esac
+- ;;
+-
+- interix[[3-9]]*)
+- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+- # Instead, we relocate shared libraries at runtime.
+- ;;
+-
+- msdosdjgpp*)
+- # Just because we use GCC doesn't mean we suddenly get shared libraries
+- # on systems that don't support them.
+- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+- enable_shared=no
+- ;;
+-
+- *nto* | *qnx*)
+- # QNX uses GNU C++, but need to define -shared option too, otherwise
+- # it will coredump.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+- ;;
+-
+- sysv4*MP*)
+- if test -d /usr/nec; then
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+- fi
+- ;;
+-
+- *)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- esac
+- else
+- # PORTME Check for flag to pass linker flags through the system compiler.
+- case $host_os in
+- aix*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- if test "$host_cpu" = ia64; then
+- # AIX 5 now supports IA64 processor
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- else
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+- fi
+- ;;
+-
+- mingw* | cygwin* | pw32* | os2* | cegcc*)
+- # This hack is so that the source file can tell whether it is being
+- # built for inclusion in a dll (and should export symbols for example).
+- m4_if([$1], [GCJ], [],
+- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+- ;;
+-
+- hpux9* | hpux10* | hpux11*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+- # not for PA HP-UX.
+- case $host_cpu in
+- hppa*64*|ia64*)
+- # +Z the default
+- ;;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+- ;;
+- esac
+- # Is there a better lt_prog_compiler_static that works with the bundled CC?
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+- ;;
+-
+- irix5* | irix6* | nonstopux*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- # PIC (with -KPIC) is the default.
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+-
+- linux* | k*bsd*-gnu)
+- case $cc_basename in
+- # old Intel for x86_64 which still supported -KPIC.
+- ecc*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+- ;;
+- # icc used to be incompatible with GCC.
+- # ICC 10 doesn't accept -KPIC any more.
+- icc* | ifort*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+- ;;
+- # Lahey Fortran 8.1.
+- lf95*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+- ;;
+- pgcc* | pgf77* | pgf90* | pgf95*)
+- # Portland Group compilers (*not* the Pentium gcc compiler,
+- # which looks to be a dead project)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+- ccc*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- # All Alpha code is PIC.
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+- xl*)
+- # IBM XL C 8.0/Fortran 10.1 on PPC
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+- ;;
+- *)
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C 5.9
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- ;;
+- *Sun\ F*)
+- # Sun Fortran 8.3 passes all unrecognized flags to the linker
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+- ;;
+- esac
+- ;;
+- esac
+- ;;
+-
+- newsos6)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+-
+- *nto* | *qnx*)
+- # QNX uses GNU C++, but need to define -shared option too, otherwise
+- # it will coredump.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+- ;;
+-
+- osf3* | osf4* | osf5*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- # All OSF/1 code is PIC.
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+-
+- rdos*)
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+-
+- solaris*)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- case $cc_basename in
+- f77* | f90* | f95*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+- esac
+- ;;
+-
+- sunos4*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+-
+- sysv4 | sysv4.2uw2* | sysv4.3*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+-
+- sysv4*MP*)
+- if test -d /usr/nec ;then
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- fi
+- ;;
+-
+- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+-
+- unicos*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+- ;;
+-
+- uts4*)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+-
+- *)
+- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+- ;;
+- esac
+- fi
+-])
+-case $host_os in
+- # For platforms which do not support PIC, -DPIC is meaningless:
+- *djgpp*)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+- ;;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+- ;;
+-esac
+-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+- [How to pass a linker flag through the compiler])
+-
+-#
+-# Check to make sure the PIC flag actually works.
+-#
+-if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+- _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+- [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+- [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+- [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+- "" | " "*) ;;
+- *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+- esac],
+- [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+-fi
+-_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+- [Additional compiler flags for building library objects])
+-
+-#
+-# Check to make sure the static flag actually works.
+-#
+-wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+-_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+- _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+- $lt_tmp_static_flag,
+- [],
+- [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+-_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+- [Compiler flag to prevent dynamic linking])
+-])# _LT_COMPILER_PIC
+-
+-
+-# _LT_LINKER_SHLIBS([TAGNAME])
+-# ----------------------------
+-# See if the linker supports building shared libraries.
+-m4_defun([_LT_LINKER_SHLIBS],
+-[AC_REQUIRE([LT_PATH_LD])dnl
+-AC_REQUIRE([LT_PATH_NM])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_DECL_EGREP])dnl
+-m4_require([_LT_DECL_SED])dnl
+-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+-m4_require([_LT_TAG_COMPILER])dnl
+-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+-m4_if([$1], [CXX], [
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+- case $host_os in
+- aix[[4-9]]*)
+- # If we're using GNU nm, then we don't want the "-C" option.
+- # -C means demangle to AIX nm, but means don't demangle with GNU nm
+- if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+- else
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+- fi
+- ;;
+- pw32*)
+- _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+- ;;
+- cygwin* | mingw* | cegcc*)
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
+- *)
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
+- esac
+- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+-], [
+- runpath_var=
+- _LT_TAGVAR(allow_undefined_flag, $1)=
+- _LT_TAGVAR(always_export_symbols, $1)=no
+- _LT_TAGVAR(archive_cmds, $1)=
+- _LT_TAGVAR(archive_expsym_cmds, $1)=
+- _LT_TAGVAR(compiler_needs_object, $1)=no
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+- _LT_TAGVAR(hardcode_automatic, $1)=no
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=
+- _LT_TAGVAR(hardcode_minus_L, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+- _LT_TAGVAR(inherit_rpath, $1)=no
+- _LT_TAGVAR(link_all_deplibs, $1)=unknown
+- _LT_TAGVAR(module_cmds, $1)=
+- _LT_TAGVAR(module_expsym_cmds, $1)=
+- _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+- _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+- _LT_TAGVAR(thread_safe_flag_spec, $1)=
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=
+- # include_expsyms should be a list of space-separated symbols to be *always*
+- # included in the symbol list
+- _LT_TAGVAR(include_expsyms, $1)=
+- # exclude_expsyms can be an extended regexp of symbols to exclude
+- # it will be wrapped by ` (' and `)$', so one must not match beginning or
+- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+- # as well as any symbol that contains `d'.
+- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+- # platforms (ab)use it in PIC code, but their linkers get confused if
+- # the symbol is explicitly referenced. Since portable code cannot
+- # rely on this symbol name, it's probably fine to never include it in
+- # preloaded symbol tables.
+- # Exclude shared library initialization/finalization symbols.
+-dnl Note also adjust exclude_expsyms for C++ above.
+- extract_expsyms_cmds=
+-
+- case $host_os in
+- cygwin* | mingw* | pw32* | cegcc*)
+- # FIXME: the MSVC++ port hasn't been tested in a loooong time
+- # When not using gcc, we currently assume that we are using
+- # Microsoft Visual C++.
+- if test "$GCC" != yes; then
+- with_gnu_ld=no
+- fi
+- ;;
+- interix*)
+- # we just hope/assume this is gcc and not c89 (= MSVC++)
+- with_gnu_ld=yes
+- ;;
+- openbsd*)
+- with_gnu_ld=no
+- ;;
+- esac
+-
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- if test "$with_gnu_ld" = yes; then
+- # If archive_cmds runs LD, not CC, wlarc should be empty
+- wlarc='${wl}'
+-
+- # Set some defaults for GNU ld with shared library support. These
+- # are reset later if shared libraries are not supported. Putting them
+- # here allows them to be overridden if necessary.
+- runpath_var=LD_RUN_PATH
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- # ancient GNU ld didn't support --whole-archive et. al.
+- if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+- else
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=
+- fi
+- supports_anon_versioning=no
+- case `$LD -v 2>&1` in
+- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+- *\ 2.11.*) ;; # other 2.11 versions
+- *) supports_anon_versioning=yes ;;
+- esac
+-
+- # See if GNU ld supports shared libraries.
+- case $host_os in
+- aix[[3-9]]*)
+- # On AIX/PPC, the GNU linker is very broken
+- if test "$host_cpu" != ia64; then
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- cat <<_LT_EOF 1>&2
+-
+-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+-*** to be unable to reliably create shared libraries on AIX.
+-*** Therefore, libtool is disabling shared libraries support. If you
+-*** really care for shared libraries, you may want to modify your PATH
+-*** so that a non-GNU linker is found, and then restart.
+-
+-_LT_EOF
+- fi
+- ;;
+-
+- amigaos*)
+- case $host_cpu in
+- powerpc)
+- # see comment about AmigaOS4 .so support
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)=''
+- ;;
+- m68k)
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- ;;
+- esac
+- ;;
+-
+- beos*)
+- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+- # support --undefined. This deserves some investigation. FIXME
+- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+-
+- cygwin* | mingw* | pw32* | cegcc*)
+- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+- # as there is no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(always_export_symbols, $1)=no
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+-
+- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- # If the export-symbols file already is a .def file (1st line
+- # is EXPORTS), use it as is; otherwise, prepend...
+- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname.def;
+- else
+- echo EXPORTS > $output_objdir/$soname.def;
+- cat $export_symbols >> $output_objdir/$soname.def;
+- fi~
+- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+-
+- interix[[3-9]]*)
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+- # Instead, shared libraries are loaded at an image base (0x10000000 by
+- # default) and relocated if they conflict, which is a slow very memory
+- # consuming and fragmenting process. To avoid this, we pick a random,
+- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- ;;
+-
+- gnu* | linux* | tpf* | k*bsd*-gnu)
+- tmp_diet=no
+- if test "$host_os" = linux-dietlibc; then
+- case $cc_basename in
+- diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+- esac
+- fi
+- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+- && test "$tmp_diet" = no
+- then
+- tmp_addflag=
+- tmp_sharedflag='-shared'
+- case $cc_basename,$host_cpu in
+- pgcc*) # Portland Group C compiler
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- tmp_addflag=' $pic_flag'
+- ;;
+- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- tmp_addflag=' $pic_flag -Mnomain' ;;
+- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+- tmp_addflag=' -i_dynamic' ;;
+- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+- tmp_addflag=' -i_dynamic -nofor_main' ;;
+- ifc* | ifort*) # Intel Fortran compiler
+- tmp_addflag=' -nofor_main' ;;
+- lf95*) # Lahey Fortran 8.1
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=
+- tmp_sharedflag='--shared' ;;
+- xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+- tmp_sharedflag='-qmkshrobj'
+- tmp_addflag= ;;
+- esac
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*) # Sun C 5.9
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- _LT_TAGVAR(compiler_needs_object, $1)=yes
+- tmp_sharedflag='-G' ;;
+- *Sun\ F*) # Sun Fortran 8.3
+- tmp_sharedflag='-G' ;;
+- esac
+- _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+-
+- if test "x$supports_anon_versioning" = xyes; then
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+- echo "local: *; };" >> $output_objdir/$libname.ver~
+- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+- fi
+-
+- case $cc_basename in
+- xlf*)
+- # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+- if test "x$supports_anon_versioning" = xyes; then
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+- echo "local: *; };" >> $output_objdir/$libname.ver~
+- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+- fi
+- ;;
+- esac
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+-
+- netbsd*)
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+- wlarc=
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- fi
+- ;;
+-
+- solaris*)
+- if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- cat <<_LT_EOF 1>&2
+-
+-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+-*** create shared libraries on Solaris systems. Therefore, libtool
+-*** is disabling shared libraries support. We urge you to upgrade GNU
+-*** binutils to release 2.9.1 or newer. Another option is to modify
+-*** your PATH or compiler configuration so that the native linker is
+-*** used, and then restart.
+-
+-_LT_EOF
+- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+-
+- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+- case `$LD -v 2>&1` in
+- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- cat <<_LT_EOF 1>&2
+-
+-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+-*** reliably create shared libraries on SCO systems. Therefore, libtool
+-*** is disabling shared libraries support. We urge you to upgrade GNU
+-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+-*** your PATH or compiler configuration so that the native linker is
+-*** used, and then restart.
+-
+-_LT_EOF
+- ;;
+- *)
+- # For security reasons, it is highly recommended that you always
+- # use absolute paths for naming shared libraries, and exclude the
+- # DT_RUNPATH tag from executables and libraries. But doing so
+- # requires that you compile everything twice, which is a pain.
+- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
+-
+- sunos4*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- wlarc=
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- *)
+- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+-
+- if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+- runpath_var=
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=
+- fi
+- else
+- # PORTME fill in a description of your system's linker (not GNU ld)
+- case $host_os in
+- aix3*)
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(always_export_symbols, $1)=yes
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+- # Note: this linker hardcodes the directories in LIBPATH if there
+- # are no directories specified by -L.
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+- # Neither direct hardcoding nor static linking is supported with a
+- # broken collect2.
+- _LT_TAGVAR(hardcode_direct, $1)=unsupported
+- fi
+- ;;
+-
+- aix[[4-9]]*)
+- if test "$host_cpu" = ia64; then
+- # On IA64, the linker does run time linking by default, so we don't
+- # have to do anything special.
+- aix_use_runtimelinking=no
+- exp_sym_flag='-Bexport'
+- no_entry_flag=""
+- else
+- # If we're using GNU nm, then we don't want the "-C" option.
+- # -C means demangle to AIX nm, but means don't demangle with GNU nm
+- if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+- else
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+- fi
+- aix_use_runtimelinking=no
+-
+- # Test if we are trying to use run time linking or normal
+- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+- # need to do runtime linking.
+- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+- for ld_flag in $LDFLAGS; do
+- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+- aix_use_runtimelinking=yes
+- break
+- fi
+- done
+- ;;
+- esac
+-
+- exp_sym_flag='-bexport'
+- no_entry_flag='-bnoentry'
+- fi
+-
+- # When large executables or shared objects are built, AIX ld can
+- # have problems creating the table of contents. If linking a library
+- # or program results in "error TOC overflow" add -mminimal-toc to
+- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+-
+- _LT_TAGVAR(archive_cmds, $1)=''
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+-
+- if test "$GCC" = yes; then
+- case $host_os in aix4.[[012]]|aix4.[[012]].*)
+- # We only want to do this on AIX 4.2 and lower, the check
+- # below for broken collect2 doesn't work under 4.3+
+- collect2name=`${CC} -print-prog-name=collect2`
+- if test -f "$collect2name" &&
+- strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+- then
+- # We have reworked collect2
+- :
+- else
+- # We have old collect2
+- _LT_TAGVAR(hardcode_direct, $1)=unsupported
+- # It fails to find uninstalled libraries when the uninstalled
+- # path is not listed in the libpath. Setting hardcode_minus_L
+- # to unsupported forces relinking
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=
+- fi
+- ;;
+- esac
+- shared_flag='-shared'
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag="$shared_flag "'${wl}-G'
+- fi
+- else
+- # not using gcc
+- if test "$host_cpu" = ia64; then
+- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+- # chokes on -Wl,-G. The following line is correct:
+- shared_flag='-G'
+- else
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag='${wl}-G'
+- else
+- shared_flag='${wl}-bM:SRE'
+- fi
+- fi
+- fi
+-
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+- # It seems that -bexpall does not export symbols beginning with
+- # underscore (_), so it is better to generate a list of symbols to export.
+- _LT_TAGVAR(always_export_symbols, $1)=yes
+- if test "$aix_use_runtimelinking" = yes; then
+- # Warning - without using the other runtime loading flags (-brtl),
+- # -berok will link without error, but may produce a broken library.
+- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+- # Determine the default libpath from the value encoded in an
+- # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+- else
+- if test "$host_cpu" = ia64; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+- _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+- else
+- # Determine the default libpath from the value encoded in an
+- # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- # Warning - without using the other run time loading flags,
+- # -berok will link without error, but may produce a broken library.
+- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # Exported symbols can be pulled into shared objects from archives
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+- # This is similar to how AIX traditionally builds its shared libraries.
+- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+- fi
+- fi
+- ;;
+-
+- amigaos*)
+- case $host_cpu in
+- powerpc)
+- # see comment about AmigaOS4 .so support
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)=''
+- ;;
+- m68k)
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- ;;
+- esac
+- ;;
+-
+- bsdi[[45]]*)
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+- ;;
+-
+- cygwin* | mingw* | pw32* | cegcc*)
+- # When not using gcc, we currently assume that we are using
+- # Microsoft Visual C++.
+- # hardcode_libdir_flag_spec is actually meaningless, as there is
+- # no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Tell ltmain to make .lib files, not .a files.
+- libext=lib
+- # Tell ltmain to make .dll files, not .so files.
+- shrext_cmds=".dll"
+- # FIXME: Setting linknames here is a bad hack.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+- # The linker will automatically build a .lib file if we build a DLL.
+- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+- # FIXME: Should let the user specify the lib program.
+- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+- ;;
+-
+- darwin* | rhapsody*)
+- _LT_DARWIN_LINKER_FEATURES($1)
+- ;;
+-
+- dgux*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- freebsd1*)
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+-
+- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+- # support. Future versions do this automatically, but an explicit c++rt0.o
+- # does not break anything, and helps significantly (at the cost of a little
+- # extra space).
+- freebsd2.2*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+- freebsd2*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+- freebsd* | dragonfly*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- hpux9*)
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- fi
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+-
+- # hardcode_minus_L: Not really in the search PATH,
+- # but as the default location of the library.
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- ;;
+-
+- hpux10*)
+- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+- fi
+- if test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- # hardcode_minus_L: Not really in the search PATH,
+- # but as the default location of the library.
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- fi
+- ;;
+-
+- hpux11*)
+- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+- case $host_cpu in
+- hppa*64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
+- else
+- case $host_cpu in
+- hppa*64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
+- fi
+- if test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+-
+- case $host_cpu in
+- hppa*64*|ia64*)
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+- *)
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+-
+- # hardcode_minus_L: Not really in the search PATH,
+- # but as the default location of the library.
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- ;;
+- esac
+- fi
+- ;;
+-
+- irix5* | irix6* | nonstopux*)
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- # Try to use the -exported_symbol ld option, if it does not
+- # work, assume that -exports_file does not work either and
+- # implicitly export all symbols.
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+- AC_LINK_IFELSE(int foo(void) {},
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+- )
+- LDFLAGS="$save_LDFLAGS"
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+- fi
+- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(inherit_rpath, $1)=yes
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- ;;
+-
+- netbsd*)
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+- fi
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- newsos6)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- *nto* | *qnx*)
+- ;;
+-
+- openbsd*)
+- if test -f /usr/libexec/ld.so; then
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- else
+- case $host_os in
+- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- ;;
+- esac
+- fi
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+-
+- os2*)
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+- _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+- ;;
+-
+- osf3*)
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- else
+- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- fi
+- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- ;;
+-
+- osf4* | osf5*) # as osf3* with the addition of -msym flag
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- else
+- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+-
+- # Both c and cxx compiler support -rpath directly
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+- fi
+- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- ;;
+-
+- solaris*)
+- _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+- if test "$GCC" = yes; then
+- wlarc='${wl}'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+- else
+- case `$CC -V 2>&1` in
+- *"Compilers 5.0"*)
+- wlarc=''
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+- ;;
+- *)
+- wlarc='${wl}'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+- ;;
+- esac
+- fi
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- case $host_os in
+- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+- *)
+- # The compiler driver will combine and reorder linker options,
+- # but understands `-z linker_flag'. GCC discards it without `$wl',
+- # but is careful enough not to reorder.
+- # Supported since Solaris 2.6 (maybe 2.5.1?)
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+- else
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+- fi
+- ;;
+- esac
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- ;;
+-
+- sunos4*)
+- if test "x$host_vendor" = xsequent; then
+- # Use $CC to link under sequent, because it throws in some extra .o
+- # files that make .init and .fini sections work.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+- fi
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- sysv4)
+- case $host_vendor in
+- sni)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+- ;;
+- siemens)
+- ## LD is ld it makes a PLAMLIB
+- ## CC just makes a GrossModule.
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- ;;
+- motorola)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+- ;;
+- esac
+- runpath_var='LD_RUN_PATH'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- sysv4.3*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+- ;;
+-
+- sysv4*MP*)
+- if test -d /usr/nec; then
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- runpath_var=LD_RUN_PATH
+- hardcode_runpath_var=yes
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- fi
+- ;;
+-
+- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- runpath_var='LD_RUN_PATH'
+-
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- fi
+- ;;
+-
+- sysv5* | sco3.2v5* | sco5v6*)
+- # Note: We can NOT use -z defs as we might desire, because we do not
+- # link with -lc, and that would cause any symbols used from libc to
+- # always be unresolved, which means just about no library would
+- # ever link correctly. If we're not using GNU ld we use -z text
+- # though, which does catch some bad symbols but isn't as heavy-handed
+- # as -z defs.
+- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+- runpath_var='LD_RUN_PATH'
+-
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- fi
+- ;;
+-
+- uts4*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- *)
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+-
+- if test x$host_vendor = xsni; then
+- case $host in
+- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+- ;;
+- esac
+- fi
+- fi
+-])
+-AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+-
+-_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+-
+-_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+-_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+-_LT_DECL([], [extract_expsyms_cmds], [2],
+- [The commands to extract the exported symbol list from a shared archive])
+-
+-#
+-# Do we need to explicitly link libc?
+-#
+-case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+-x|xyes)
+- # Assume -lc should be added
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+-
+- if test "$enable_shared" = yes && test "$GCC" = yes; then
+- case $_LT_TAGVAR(archive_cmds, $1) in
+- *'~'*)
+- # FIXME: we may have to deal with multi-command sequences.
+- ;;
+- '$CC '*)
+- # Test whether the compiler implicitly links with -lc since on some
+- # systems, -lgcc has to come before -lc. If gcc already passes -lc
+- # to ld, don't add -lc before -lgcc.
+- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+- $RM conftest*
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+-
+- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+- soname=conftest
+- lib=conftest
+- libobjs=conftest.$ac_objext
+- deplibs=
+- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+- pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+- compiler_flags=-v
+- linker_flags=-v
+- verstring=
+- output_objdir=.
+- libname=conftest
+- lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+- _LT_TAGVAR(allow_undefined_flag, $1)=
+- if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+- then
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- else
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+- fi
+- _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+- else
+- cat conftest.err 1>&5
+- fi
+- $RM conftest*
+- AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
+- ;;
+- esac
+- fi
+- ;;
+-esac
+-
+-_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+- [Whether or not to add -lc for building shared libraries])
+-_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+- [enable_shared_with_static_runtimes], [0],
+- [Whether or not to disallow shared libs when runtime libs are static])
+-_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+- [Compiler flag to allow reflexive dlopens])
+-_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+- [Compiler flag to generate shared objects directly from archives])
+-_LT_TAGDECL([], [compiler_needs_object], [1],
+- [Whether the compiler copes with passing no objects directly])
+-_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+- [Create an old-style archive from a shared archive])
+-_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+- [Create a temporary old-style archive to link instead of a shared archive])
+-_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+-_LT_TAGDECL([], [archive_expsym_cmds], [2])
+-_LT_TAGDECL([], [module_cmds], [2],
+- [Commands used to build a loadable module if different from building
+- a shared archive.])
+-_LT_TAGDECL([], [module_expsym_cmds], [2])
+-_LT_TAGDECL([], [with_gnu_ld], [1],
+- [Whether we are building with GNU ld or not])
+-_LT_TAGDECL([], [allow_undefined_flag], [1],
+- [Flag that allows shared libraries with undefined symbols to be built])
+-_LT_TAGDECL([], [no_undefined_flag], [1],
+- [Flag that enforces no undefined symbols])
+-_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+- [Flag to hardcode $libdir into a binary during linking.
+- This must work even if $libdir does not exist])
+-_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
+- [[If ld is used when linking, flag to hardcode $libdir into a binary
+- during linking. This must work even if $libdir does not exist]])
+-_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+- [Whether we need a single "-rpath" flag with a separated argument])
+-_LT_TAGDECL([], [hardcode_direct], [0],
+- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+- DIR into the resulting binary])
+-_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+- DIR into the resulting binary and the resulting library dependency is
+- "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+- library is relocated])
+-_LT_TAGDECL([], [hardcode_minus_L], [0],
+- [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+- into the resulting binary])
+-_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+- [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+- into the resulting binary])
+-_LT_TAGDECL([], [hardcode_automatic], [0],
+- [Set to "yes" if building a shared library automatically hardcodes DIR
+- into the library and all subsequent libraries and executables linked
+- against it])
+-_LT_TAGDECL([], [inherit_rpath], [0],
+- [Set to yes if linker adds runtime paths of dependent libraries
+- to runtime path list])
+-_LT_TAGDECL([], [link_all_deplibs], [0],
+- [Whether libtool must link a program against all its dependency libraries])
+-_LT_TAGDECL([], [fix_srcfile_path], [1],
+- [Fix the shell variable $srcfile for the compiler])
+-_LT_TAGDECL([], [always_export_symbols], [0],
+- [Set to "yes" if exported symbols are required])
+-_LT_TAGDECL([], [export_symbols_cmds], [2],
+- [The commands to list exported symbols])
+-_LT_TAGDECL([], [exclude_expsyms], [1],
+- [Symbols that should not be listed in the preloaded symbols])
+-_LT_TAGDECL([], [include_expsyms], [1],
+- [Symbols that must always be exported])
+-_LT_TAGDECL([], [prelink_cmds], [2],
+- [Commands necessary for linking programs (against libraries) with templates])
+-_LT_TAGDECL([], [file_list_spec], [1],
+- [Specify filename containing input files])
+-dnl FIXME: Not yet implemented
+-dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+-dnl [Compiler flag to generate thread safe objects])
+-])# _LT_LINKER_SHLIBS
+-
+-
+-# _LT_LANG_C_CONFIG([TAG])
+-# ------------------------
+-# Ensure that the configuration variables for a C compiler are suitably
+-# defined. These variables are subsequently used by _LT_CONFIG to write
+-# the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_C_CONFIG],
+-[m4_require([_LT_DECL_EGREP])dnl
+-lt_save_CC="$CC"
+-AC_LANG_PUSH(C)
+-
+-# Source file extension for C test sources.
+-ac_ext=c
+-
+-# Object file extension for compiled C test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
+-
+-# Code to be used in simple compile tests
+-lt_simple_compile_test_code="int some_variable = 0;"
+-
+-# Code to be used in simple link tests
+-lt_simple_link_test_code='int main(){return(0);}'
+-
+-_LT_TAG_COMPILER
+-# Save the default compiler, since it gets overwritten when the other
+-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+-compiler_DEFAULT=$CC
+-
+-# save warnings/boilerplate of simple test code
+-_LT_COMPILER_BOILERPLATE
+-_LT_LINKER_BOILERPLATE
+-
+-## CAVEAT EMPTOR:
+-## There is no encapsulation within the following macros, do not change
+-## the running order or otherwise move them around unless you know exactly
+-## what you are doing...
+-if test -n "$compiler"; then
+- _LT_COMPILER_NO_RTTI($1)
+- _LT_COMPILER_PIC($1)
+- _LT_COMPILER_C_O($1)
+- _LT_COMPILER_FILE_LOCKS($1)
+- _LT_LINKER_SHLIBS($1)
+- _LT_SYS_DYNAMIC_LINKER($1)
+- _LT_LINKER_HARDCODE_LIBPATH($1)
+- LT_SYS_DLOPEN_SELF
+- _LT_CMD_STRIPLIB
+-
+- # Report which library types will actually be built
+- AC_MSG_CHECKING([if libtool supports shared libraries])
+- AC_MSG_RESULT([$can_build_shared])
+-
+- AC_MSG_CHECKING([whether to build shared libraries])
+- test "$can_build_shared" = "no" && enable_shared=no
+-
+- # On AIX, shared libraries and static libraries use the same namespace, and
+- # are all built from PIC.
+- case $host_os in
+- aix3*)
+- test "$enable_shared" = yes && enable_static=no
+- if test -n "$RANLIB"; then
+- archive_cmds="$archive_cmds~\$RANLIB \$lib"
+- postinstall_cmds='$RANLIB $lib'
+- fi
+- ;;
+-
+- aix[[4-9]]*)
+- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+- test "$enable_shared" = yes && enable_static=no
+- fi
+- ;;
+- esac
+- AC_MSG_RESULT([$enable_shared])
+-
+- AC_MSG_CHECKING([whether to build static libraries])
+- # Make sure either enable_shared or enable_static is yes.
+- test "$enable_shared" = yes || enable_static=yes
+- AC_MSG_RESULT([$enable_static])
+-
+- _LT_CONFIG($1)
+-fi
+-AC_LANG_POP
+-CC="$lt_save_CC"
+-])# _LT_LANG_C_CONFIG
+-
+-
+-# _LT_PROG_CXX
+-# ------------
+-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+-# compiler, we have our own version here.
+-m4_defun([_LT_PROG_CXX],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+-AC_PROG_CXX
+-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+- (test "X$CXX" != "Xg++"))) ; then
+- AC_PROG_CXXCPP
+-else
+- _lt_caught_CXX_error=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_CXX
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_CXX], [])
+-
+-
+-# _LT_LANG_CXX_CONFIG([TAG])
+-# --------------------------
+-# Ensure that the configuration variables for a C++ compiler are suitably
+-# defined. These variables are subsequently used by _LT_CONFIG to write
+-# the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_CXX_CONFIG],
+-[AC_REQUIRE([_LT_PROG_CXX])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_DECL_EGREP])dnl
+-
+-AC_LANG_PUSH(C++)
+-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+-_LT_TAGVAR(allow_undefined_flag, $1)=
+-_LT_TAGVAR(always_export_symbols, $1)=no
+-_LT_TAGVAR(archive_expsym_cmds, $1)=
+-_LT_TAGVAR(compiler_needs_object, $1)=no
+-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_direct, $1)=no
+-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+-_LT_TAGVAR(hardcode_libdir_separator, $1)=
+-_LT_TAGVAR(hardcode_minus_L, $1)=no
+-_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+-_LT_TAGVAR(hardcode_automatic, $1)=no
+-_LT_TAGVAR(inherit_rpath, $1)=no
+-_LT_TAGVAR(module_cmds, $1)=
+-_LT_TAGVAR(module_expsym_cmds, $1)=
+-_LT_TAGVAR(link_all_deplibs, $1)=unknown
+-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+-_LT_TAGVAR(no_undefined_flag, $1)=
+-_LT_TAGVAR(whole_archive_flag_spec, $1)=
+-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+-
+-# Source file extension for C++ test sources.
+-ac_ext=cpp
+-
+-# Object file extension for compiled C++ test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
+-
+-# No sense in running all these tests if we already determined that
+-# the CXX compiler isn't working. Some variables (like enable_shared)
+-# are currently assumed to apply to all compilers on this platform,
+-# and will be corrupted by setting them based on a non-working compiler.
+-if test "$_lt_caught_CXX_error" != yes; then
+- # Code to be used in simple compile tests
+- lt_simple_compile_test_code="int some_variable = 0;"
+-
+- # Code to be used in simple link tests
+- lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+-
+- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+- _LT_TAG_COMPILER
+-
+- # save warnings/boilerplate of simple test code
+- _LT_COMPILER_BOILERPLATE
+- _LT_LINKER_BOILERPLATE
+-
+- # Allow CC to be a program name with arguments.
+- lt_save_CC=$CC
+- lt_save_LD=$LD
+- lt_save_GCC=$GCC
+- GCC=$GXX
+- lt_save_with_gnu_ld=$with_gnu_ld
+- lt_save_path_LD=$lt_cv_path_LD
+- if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+- else
+- $as_unset lt_cv_prog_gnu_ld
+- fi
+- if test -n "${lt_cv_path_LDCXX+set}"; then
+- lt_cv_path_LD=$lt_cv_path_LDCXX
+- else
+- $as_unset lt_cv_path_LD
+- fi
+- test -z "${LDCXX+set}" || LD=$LDCXX
+- CC=${CXX-"c++"}
+- compiler=$CC
+- _LT_TAGVAR(compiler, $1)=$CC
+- _LT_CC_BASENAME([$compiler])
+-
+- if test -n "$compiler"; then
+- # We don't want -fno-exception when compiling C++ code, so set the
+- # no_builtin_flag separately
+- if test "$GXX" = yes; then
+- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+- else
+- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+- fi
+-
+- if test "$GXX" = yes; then
+- # Set up default GNU C++ configuration
+-
+- LT_PATH_LD
+-
+- # Check if GNU C++ uses GNU ld as the underlying linker, since the
+- # archiving commands below assume that GNU ld is being used.
+- if test "$with_gnu_ld" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+-
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+-
+- # If archive_cmds runs LD, not CC, wlarc should be empty
+- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+- # investigate it a little bit more. (MM)
+- wlarc='${wl}'
+-
+- # ancient GNU ld didn't support --whole-archive et. al.
+- if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+- $GREP 'no-whole-archive' > /dev/null; then
+- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+- else
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=
+- fi
+- else
+- with_gnu_ld=no
+- wlarc=
+-
+- # A generic and very simple default shared library creation
+- # command for GNU C++ for the case where it uses the native
+- # linker, instead of GNU ld. If possible, this setting should
+- # overridden to take advantage of the native linker features on
+- # the platform it is being used on.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+- fi
+-
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+-
+- else
+- GXX=no
+- with_gnu_ld=no
+- wlarc=
+- fi
+-
+- # PORTME: fill in a description of your system's C++ link characteristics
+- AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- case $host_os in
+- aix3*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- aix[[4-9]]*)
+- if test "$host_cpu" = ia64; then
+- # On IA64, the linker does run time linking by default, so we don't
+- # have to do anything special.
+- aix_use_runtimelinking=no
+- exp_sym_flag='-Bexport'
+- no_entry_flag=""
+- else
+- aix_use_runtimelinking=no
+-
+- # Test if we are trying to use run time linking or normal
+- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+- # need to do runtime linking.
+- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+- for ld_flag in $LDFLAGS; do
+- case $ld_flag in
+- *-brtl*)
+- aix_use_runtimelinking=yes
+- break
+- ;;
+- esac
+- done
+- ;;
+- esac
+-
+- exp_sym_flag='-bexport'
+- no_entry_flag='-bnoentry'
+- fi
+-
+- # When large executables or shared objects are built, AIX ld can
+- # have problems creating the table of contents. If linking a library
+- # or program results in "error TOC overflow" add -mminimal-toc to
+- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+-
+- _LT_TAGVAR(archive_cmds, $1)=''
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+-
+- if test "$GXX" = yes; then
+- case $host_os in aix4.[[012]]|aix4.[[012]].*)
+- # We only want to do this on AIX 4.2 and lower, the check
+- # below for broken collect2 doesn't work under 4.3+
+- collect2name=`${CC} -print-prog-name=collect2`
+- if test -f "$collect2name" &&
+- strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+- then
+- # We have reworked collect2
+- :
+- else
+- # We have old collect2
+- _LT_TAGVAR(hardcode_direct, $1)=unsupported
+- # It fails to find uninstalled libraries when the uninstalled
+- # path is not listed in the libpath. Setting hardcode_minus_L
+- # to unsupported forces relinking
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=
+- fi
+- esac
+- shared_flag='-shared'
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag="$shared_flag "'${wl}-G'
+- fi
+- else
+- # not using gcc
+- if test "$host_cpu" = ia64; then
+- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+- # chokes on -Wl,-G. The following line is correct:
+- shared_flag='-G'
+- else
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag='${wl}-G'
+- else
+- shared_flag='${wl}-bM:SRE'
+- fi
+- fi
+- fi
+-
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+- # It seems that -bexpall does not export symbols beginning with
+- # underscore (_), so it is better to generate a list of symbols to
+- # export.
+- _LT_TAGVAR(always_export_symbols, $1)=yes
+- if test "$aix_use_runtimelinking" = yes; then
+- # Warning - without using the other runtime loading flags (-brtl),
+- # -berok will link without error, but may produce a broken library.
+- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+- # Determine the default libpath from the value encoded in an empty
+- # executable.
+- _LT_SYS_MODULE_PATH_AIX
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+-
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+- else
+- if test "$host_cpu" = ia64; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+- _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+- else
+- # Determine the default libpath from the value encoded in an
+- # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- # Warning - without using the other run time loading flags,
+- # -berok will link without error, but may produce a broken library.
+- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # Exported symbols can be pulled into shared objects from archives
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+- # This is similar to how AIX traditionally builds its shared
+- # libraries.
+- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+- fi
+- fi
+- ;;
+-
+- beos*)
+- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+- # support --undefined. This deserves some investigation. FIXME
+- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+-
+- chorus*)
+- case $cc_basename in
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+-
+- cygwin* | mingw* | pw32* | cegcc*)
+- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+- # as there is no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(always_export_symbols, $1)=no
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+-
+- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- # If the export-symbols file already is a .def file (1st line
+- # is EXPORTS), use it as is; otherwise, prepend...
+- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname.def;
+- else
+- echo EXPORTS > $output_objdir/$soname.def;
+- cat $export_symbols >> $output_objdir/$soname.def;
+- fi~
+- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- darwin* | rhapsody*)
+- _LT_DARWIN_LINKER_FEATURES($1)
+- ;;
+-
+- dgux*)
+- case $cc_basename in
+- ec++*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- ghcx*)
+- # Green Hills C++ Compiler
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+-
+- freebsd[[12]]*)
+- # C++ shared libraries reported to be fairly broken before
+- # switch to ELF
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+-
+- freebsd-elf*)
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- ;;
+-
+- freebsd* | dragonfly*)
+- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+- # conventions
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- ;;
+-
+- gnu*)
+- ;;
+-
+- hpux9*)
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+- # but as the default
+- # location of the library.
+-
+- case $cc_basename in
+- CC*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- aCC*)
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+- ;;
+- *)
+- if test "$GXX" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- else
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
+-
+- hpux10*|hpux11*)
+- if test $with_gnu_ld = no; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+-
+- case $host_cpu in
+- hppa*64*|ia64*)
+- ;;
+- *)
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- ;;
+- esac
+- fi
+- case $host_cpu in
+- hppa*64*|ia64*)
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+- *)
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+- # but as the default
+- # location of the library.
+- ;;
+- esac
+-
+- case $cc_basename in
+- CC*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- aCC*)
+- case $host_cpu in
+- hppa*64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- esac
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+- ;;
+- *)
+- if test "$GXX" = yes; then
+- if test $with_gnu_ld = no; then
+- case $host_cpu in
+- hppa*64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- esac
+- fi
+- else
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
+-
+- interix[[3-9]]*)
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+- # Instead, shared libraries are loaded at an image base (0x10000000 by
+- # default) and relocated if they conflict, which is a slow very memory
+- # consuming and fragmenting process. To avoid this, we pick a random,
+- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- ;;
+- irix5* | irix6*)
+- case $cc_basename in
+- CC*)
+- # SGI C++
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+-
+- # Archives containing C++ object files must be created using
+- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+- # necessary to make sure instantiated templates are included
+- # in the archive.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+- ;;
+- *)
+- if test "$GXX" = yes; then
+- if test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+- fi
+- fi
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- ;;
+- esac
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(inherit_rpath, $1)=yes
+- ;;
+-
+- linux* | k*bsd*-gnu)
+- case $cc_basename in
+- KCC*)
+- # Kuck and Associates, Inc. (KAI) C++ Compiler
+-
+- # KCC will only create a shared library if the output file
+- # ends with ".so" (or ".sl" for HP-UX), so rename the library
+- # to its proper name (with version) after linking.
+- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+-
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+-
+- # Archives containing C++ object files must be created using
+- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+- ;;
+- icpc* | ecpc* )
+- # Intel C++
+- with_gnu_ld=yes
+- # version 8.0 and above of icpc choke on multiply defined symbols
+- # if we add $predep_objects and $postdep_objects, however 7.1 and
+- # earlier do not add the objects themselves.
+- case `$CC -V 2>&1` in
+- *"Version 7."*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- ;;
+- *) # Version 8.0 or newer
+- tmp_idyn=
+- case $host_cpu in
+- ia64*) tmp_idyn=' -i_dynamic';;
+- esac
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- ;;
+- esac
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+- ;;
+- pgCC* | pgcpp*)
+- # Portland Group C++ compiler
+- case `$CC -V` in
+- *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+- _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+- rm -rf $tpldir~
+- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+- _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+- rm -rf $tpldir~
+- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+- $RANLIB $oldlib'
+- _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+- rm -rf $tpldir~
+- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+- rm -rf $tpldir~
+- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+- ;;
+- *) # Version 6 will use weak symbols
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+- ;;
+- esac
+-
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- ;;
+- cxx*)
+- # Compaq C++
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+-
+- runpath_var=LD_RUN_PATH
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+-
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+- ;;
+- xl*)
+- # IBM XL 8.0 on PPC, with GNU ld
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- if test "x$supports_anon_versioning" = xyes; then
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+- echo "local: *; };" >> $output_objdir/$libname.ver~
+- $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+- fi
+- ;;
+- *)
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C++ 5.9
+- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- _LT_TAGVAR(compiler_needs_object, $1)=yes
+-
+- # Not sure whether something based on
+- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+- # would be better.
+- output_verbose_link_cmd='echo'
+-
+- # Archives containing C++ object files must be created using
+- # "CC -xar", where "CC" is the Sun C++ compiler. This is
+- # necessary to make sure instantiated templates are included
+- # in the archive.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+- ;;
+- esac
+- ;;
+- esac
+- ;;
+-
+- lynxos*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+-
+- m88k*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+-
+- mvs*)
+- case $cc_basename in
+- cxx*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+-
+- netbsd*)
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+- wlarc=
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- fi
+- # Workaround some broken pre-1.5 toolchains
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+- ;;
+-
+- *nto* | *qnx*)
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- ;;
+-
+- openbsd2*)
+- # C++ shared libraries are fairly broken
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+-
+- openbsd*)
+- if test -f /usr/libexec/ld.so; then
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+- fi
+- output_verbose_link_cmd=echo
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+-
+- osf3* | osf4* | osf5*)
+- case $cc_basename in
+- KCC*)
+- # Kuck and Associates, Inc. (KAI) C++ Compiler
+-
+- # KCC will only create a shared library if the output file
+- # ends with ".so" (or ".sl" for HP-UX), so rename the library
+- # to its proper name (with version) after linking.
+- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+-
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+-
+- # Archives containing C++ object files must be created using
+- # the KAI C++ compiler.
+- case $host in
+- osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+- *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+- esac
+- ;;
+- RCC*)
+- # Rational C++ 2.4.1
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- cxx*)
+- case $host in
+- osf3*)
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- ;;
+- *)
+- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+- echo "-hidden">> $lib.exp~
+- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+- $RM $lib.exp'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+- ;;
+- esac
+-
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+-
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+- ;;
+- *)
+- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- case $host in
+- osf3*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- ;;
+- esac
+-
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+-
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+-
+- else
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
+-
+- psos*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+-
+- sunos4*)
+- case $cc_basename in
+- CC*)
+- # Sun C++ 4.x
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- lcc*)
+- # Lucid
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+-
+- solaris*)
+- case $cc_basename in
+- CC*)
+- # Sun C++ 4.2, 5.x and Centerline C++
+- _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+-
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- case $host_os in
+- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+- *)
+- # The compiler driver will combine and reorder linker options,
+- # but understands `-z linker_flag'.
+- # Supported since Solaris 2.6 (maybe 2.5.1?)
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+- ;;
+- esac
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+-
+- output_verbose_link_cmd='echo'
+-
+- # Archives containing C++ object files must be created using
+- # "CC -xar", where "CC" is the Sun C++ compiler. This is
+- # necessary to make sure instantiated templates are included
+- # in the archive.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+- ;;
+- gcx*)
+- # Green Hills C++ Compiler
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+-
+- # The C++ compiler must be used to create the archive.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+- ;;
+- *)
+- # GNU C++ compiler with Solaris linker
+- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+- if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+-
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+- else
+- # g++ 2.7 appears to require `-G' NOT `-shared' on this
+- # platform.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+-
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+- fi
+-
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+- case $host_os in
+- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+- *)
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+- ;;
+- esac
+- fi
+- ;;
+- esac
+- ;;
+-
+- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- runpath_var='LD_RUN_PATH'
+-
+- case $cc_basename in
+- CC*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
+- ;;
+-
+- sysv5* | sco3.2v5* | sco5v6*)
+- # Note: We can NOT use -z defs as we might desire, because we do not
+- # link with -lc, and that would cause any symbols used from libc to
+- # always be unresolved, which means just about no library would
+- # ever link correctly. If we're not using GNU ld we use -z text
+- # though, which does catch some bad symbols but isn't as heavy-handed
+- # as -z defs.
+- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+- runpath_var='LD_RUN_PATH'
+-
+- case $cc_basename in
+- CC*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
+- ;;
+-
+- tandem*)
+- case $cc_basename in
+- NCC*)
+- # NonStop-UX NCC 3.20
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+-
+- vxworks*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+-
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+-
+- AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+- test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+-
+- _LT_TAGVAR(GCC, $1)="$GXX"
+- _LT_TAGVAR(LD, $1)="$LD"
+-
+- ## CAVEAT EMPTOR:
+- ## There is no encapsulation within the following macros, do not change
+- ## the running order or otherwise move them around unless you know exactly
+- ## what you are doing...
+- _LT_SYS_HIDDEN_LIBDEPS($1)
+- _LT_COMPILER_PIC($1)
+- _LT_COMPILER_C_O($1)
+- _LT_COMPILER_FILE_LOCKS($1)
+- _LT_LINKER_SHLIBS($1)
+- _LT_SYS_DYNAMIC_LINKER($1)
+- _LT_LINKER_HARDCODE_LIBPATH($1)
+-
+- _LT_CONFIG($1)
+- fi # test -n "$compiler"
+-
+- CC=$lt_save_CC
+- LDCXX=$LD
+- LD=$lt_save_LD
+- GCC=$lt_save_GCC
+- with_gnu_ld=$lt_save_with_gnu_ld
+- lt_cv_path_LDCXX=$lt_cv_path_LD
+- lt_cv_path_LD=$lt_save_path_LD
+- lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+- lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+-fi # test "$_lt_caught_CXX_error" != yes
+-
+-AC_LANG_POP
+-])# _LT_LANG_CXX_CONFIG
+-
+-
+-# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+-# ---------------------------------
+-# Figure out "hidden" library dependencies from verbose
+-# compiler output when linking a shared library.
+-# Parse the compiler output and extract the necessary
+-# objects, libraries and library flags.
+-m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-# Dependencies to place before and after the object being linked:
+-_LT_TAGVAR(predep_objects, $1)=
+-_LT_TAGVAR(postdep_objects, $1)=
+-_LT_TAGVAR(predeps, $1)=
+-_LT_TAGVAR(postdeps, $1)=
+-_LT_TAGVAR(compiler_lib_search_path, $1)=
+-
+-dnl we can't use the lt_simple_compile_test_code here,
+-dnl because it contains code intended for an executable,
+-dnl not a library. It's possible we should let each
+-dnl tag define a new lt_????_link_test_code variable,
+-dnl but it's only used here...
+-m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+-int a;
+-void foo (void) { a = 0; }
+-_LT_EOF
+-], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+-class Foo
+-{
+-public:
+- Foo (void) { a = 0; }
+-private:
+- int a;
+-};
+-_LT_EOF
+-], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+- subroutine foo
+- implicit none
+- integer*4 a
+- a=0
+- return
+- end
+-_LT_EOF
+-], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+- subroutine foo
+- implicit none
+- integer a
+- a=0
+- return
+- end
+-_LT_EOF
+-], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+-public class foo {
+- private int a;
+- public void bar (void) {
+- a = 0;
+- }
+-};
+-_LT_EOF
+-])
+-dnl Parse the compiler output and extract the necessary
+-dnl objects, libraries and library flags.
+-if AC_TRY_EVAL(ac_compile); then
+- # Parse the compiler output and extract the necessary
+- # objects, libraries and library flags.
+-
+- # Sentinel used to keep track of whether or not we are before
+- # the conftest object file.
+- pre_test_object_deps_done=no
+-
+- for p in `eval "$output_verbose_link_cmd"`; do
+- case $p in
+-
+- -L* | -R* | -l*)
+- # Some compilers place space between "-{L,R}" and the path.
+- # Remove the space.
+- if test $p = "-L" ||
+- test $p = "-R"; then
+- prev=$p
+- continue
+- else
+- prev=
+- fi
+-
+- if test "$pre_test_object_deps_done" = no; then
+- case $p in
+- -L* | -R*)
+- # Internal compiler library paths should come after those
+- # provided the user. The postdeps already come after the
+- # user supplied libs so there is no need to process them.
+- if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+- _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+- else
+- _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+- fi
+- ;;
+- # The "-l" case would never come before the object being
+- # linked, so don't bother handling this case.
+- esac
+- else
+- if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+- _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+- else
+- _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+- fi
+- fi
+- ;;
+-
+- *.$objext)
+- # This assumes that the test object file only shows up
+- # once in the compiler output.
+- if test "$p" = "conftest.$objext"; then
+- pre_test_object_deps_done=yes
+- continue
+- fi
+-
+- if test "$pre_test_object_deps_done" = no; then
+- if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+- _LT_TAGVAR(predep_objects, $1)="$p"
+- else
+- _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+- fi
+- else
+- if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+- _LT_TAGVAR(postdep_objects, $1)="$p"
+- else
+- _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+- fi
+- fi
+- ;;
+-
+- *) ;; # Ignore the rest.
+-
+- esac
+- done
+-
+- # Clean up.
+- rm -f a.out a.exe
+-else
+- echo "libtool.m4: error: problem compiling $1 test program"
+-fi
+-
+-$RM -f confest.$objext
+-
+-# PORTME: override above test on systems where it is broken
+-m4_if([$1], [CXX],
+-[case $host_os in
+-interix[[3-9]]*)
+- # Interix 3.5 installs completely hosed .la files for C++, so rather than
+- # hack all around it, let's just trust "g++" to DTRT.
+- _LT_TAGVAR(predep_objects,$1)=
+- _LT_TAGVAR(postdep_objects,$1)=
+- _LT_TAGVAR(postdeps,$1)=
+- ;;
+-
+-linux*)
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C++ 5.9
+-
+- # The more standards-conforming stlport4 library is
+- # incompatible with the Cstd library. Avoid specifying
+- # it if it's in CXXFLAGS. Ignore libCrun as
+- # -library=stlport4 depends on it.
+- case " $CXX $CXXFLAGS " in
+- *" -library=stlport4 "*)
+- solaris_use_stlport4=yes
+- ;;
+- esac
+-
+- if test "$solaris_use_stlport4" != yes; then
+- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+- fi
+- ;;
+- esac
+- ;;
+-
+-solaris*)
+- case $cc_basename in
+- CC*)
+- # The more standards-conforming stlport4 library is
+- # incompatible with the Cstd library. Avoid specifying
+- # it if it's in CXXFLAGS. Ignore libCrun as
+- # -library=stlport4 depends on it.
+- case " $CXX $CXXFLAGS " in
+- *" -library=stlport4 "*)
+- solaris_use_stlport4=yes
+- ;;
+- esac
+-
+- # Adding this requires a known-good setup of shared libraries for
+- # Sun compiler versions before 5.6, else PIC objects from an old
+- # archive will be linked into the output, leading to subtle bugs.
+- if test "$solaris_use_stlport4" != yes; then
+- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+- fi
+- ;;
+- esac
+- ;;
+-esac
+-])
+-
+-case " $_LT_TAGVAR(postdeps, $1) " in
+-*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+-esac
+- _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+-if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+-fi
+-_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+- [The directories searched by this compiler when creating a shared library])
+-_LT_TAGDECL([], [predep_objects], [1],
+- [Dependencies to place before and after the objects being linked to
+- create a shared library])
+-_LT_TAGDECL([], [postdep_objects], [1])
+-_LT_TAGDECL([], [predeps], [1])
+-_LT_TAGDECL([], [postdeps], [1])
+-_LT_TAGDECL([], [compiler_lib_search_path], [1],
+- [The library search path used internally by the compiler when linking
+- a shared library])
+-])# _LT_SYS_HIDDEN_LIBDEPS
+-
+-
+-# _LT_PROG_F77
+-# ------------
+-# Since AC_PROG_F77 is broken, in that it returns the empty string
+-# if there is no fortran compiler, we have our own version here.
+-m4_defun([_LT_PROG_F77],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+-AC_PROG_F77
+-if test -z "$F77" || test "X$F77" = "Xno"; then
+- _lt_disable_F77=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_F77
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_F77], [])
+-
+-
+-# _LT_LANG_F77_CONFIG([TAG])
+-# --------------------------
+-# Ensure that the configuration variables for a Fortran 77 compiler are
+-# suitably defined. These variables are subsequently used by _LT_CONFIG
+-# to write the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_F77_CONFIG],
+-[AC_REQUIRE([_LT_PROG_F77])dnl
+-AC_LANG_PUSH(Fortran 77)
+-
+-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+-_LT_TAGVAR(allow_undefined_flag, $1)=
+-_LT_TAGVAR(always_export_symbols, $1)=no
+-_LT_TAGVAR(archive_expsym_cmds, $1)=
+-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_direct, $1)=no
+-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+-_LT_TAGVAR(hardcode_libdir_separator, $1)=
+-_LT_TAGVAR(hardcode_minus_L, $1)=no
+-_LT_TAGVAR(hardcode_automatic, $1)=no
+-_LT_TAGVAR(inherit_rpath, $1)=no
+-_LT_TAGVAR(module_cmds, $1)=
+-_LT_TAGVAR(module_expsym_cmds, $1)=
+-_LT_TAGVAR(link_all_deplibs, $1)=unknown
+-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+-_LT_TAGVAR(no_undefined_flag, $1)=
+-_LT_TAGVAR(whole_archive_flag_spec, $1)=
+-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+-
+-# Source file extension for f77 test sources.
+-ac_ext=f
+-
+-# Object file extension for compiled f77 test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
+-
+-# No sense in running all these tests if we already determined that
+-# the F77 compiler isn't working. Some variables (like enable_shared)
+-# are currently assumed to apply to all compilers on this platform,
+-# and will be corrupted by setting them based on a non-working compiler.
+-if test "$_lt_disable_F77" != yes; then
+- # Code to be used in simple compile tests
+- lt_simple_compile_test_code="\
+- subroutine t
+- return
+- end
+-"
+-
+- # Code to be used in simple link tests
+- lt_simple_link_test_code="\
+- program t
+- end
+-"
+-
+- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+- _LT_TAG_COMPILER
+-
+- # save warnings/boilerplate of simple test code
+- _LT_COMPILER_BOILERPLATE
+- _LT_LINKER_BOILERPLATE
+-
+- # Allow CC to be a program name with arguments.
+- lt_save_CC="$CC"
+- lt_save_GCC=$GCC
+- CC=${F77-"f77"}
+- compiler=$CC
+- _LT_TAGVAR(compiler, $1)=$CC
+- _LT_CC_BASENAME([$compiler])
+- GCC=$G77
+- if test -n "$compiler"; then
+- AC_MSG_CHECKING([if libtool supports shared libraries])
+- AC_MSG_RESULT([$can_build_shared])
+-
+- AC_MSG_CHECKING([whether to build shared libraries])
+- test "$can_build_shared" = "no" && enable_shared=no
+-
+- # On AIX, shared libraries and static libraries use the same namespace, and
+- # are all built from PIC.
+- case $host_os in
+- aix3*)
+- test "$enable_shared" = yes && enable_static=no
+- if test -n "$RANLIB"; then
+- archive_cmds="$archive_cmds~\$RANLIB \$lib"
+- postinstall_cmds='$RANLIB $lib'
+- fi
+- ;;
+- aix[[4-9]]*)
+- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+- test "$enable_shared" = yes && enable_static=no
+- fi
+- ;;
+- esac
+- AC_MSG_RESULT([$enable_shared])
+-
+- AC_MSG_CHECKING([whether to build static libraries])
+- # Make sure either enable_shared or enable_static is yes.
+- test "$enable_shared" = yes || enable_static=yes
+- AC_MSG_RESULT([$enable_static])
+-
+- _LT_TAGVAR(GCC, $1)="$G77"
+- _LT_TAGVAR(LD, $1)="$LD"
+-
+- ## CAVEAT EMPTOR:
+- ## There is no encapsulation within the following macros, do not change
+- ## the running order or otherwise move them around unless you know exactly
+- ## what you are doing...
+- _LT_COMPILER_PIC($1)
+- _LT_COMPILER_C_O($1)
+- _LT_COMPILER_FILE_LOCKS($1)
+- _LT_LINKER_SHLIBS($1)
+- _LT_SYS_DYNAMIC_LINKER($1)
+- _LT_LINKER_HARDCODE_LIBPATH($1)
+-
+- _LT_CONFIG($1)
+- fi # test -n "$compiler"
+-
+- GCC=$lt_save_GCC
+- CC="$lt_save_CC"
+-fi # test "$_lt_disable_F77" != yes
+-
+-AC_LANG_POP
+-])# _LT_LANG_F77_CONFIG
+-
+-
+-# _LT_PROG_FC
+-# -----------
+-# Since AC_PROG_FC is broken, in that it returns the empty string
+-# if there is no fortran compiler, we have our own version here.
+-m4_defun([_LT_PROG_FC],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+-AC_PROG_FC
+-if test -z "$FC" || test "X$FC" = "Xno"; then
+- _lt_disable_FC=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_FC
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_FC], [])
+-
+-
+-# _LT_LANG_FC_CONFIG([TAG])
+-# -------------------------
+-# Ensure that the configuration variables for a Fortran compiler are
+-# suitably defined. These variables are subsequently used by _LT_CONFIG
+-# to write the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_FC_CONFIG],
+-[AC_REQUIRE([_LT_PROG_FC])dnl
+-AC_LANG_PUSH(Fortran)
+-
+-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+-_LT_TAGVAR(allow_undefined_flag, $1)=
+-_LT_TAGVAR(always_export_symbols, $1)=no
+-_LT_TAGVAR(archive_expsym_cmds, $1)=
+-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_direct, $1)=no
+-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+-_LT_TAGVAR(hardcode_libdir_separator, $1)=
+-_LT_TAGVAR(hardcode_minus_L, $1)=no
+-_LT_TAGVAR(hardcode_automatic, $1)=no
+-_LT_TAGVAR(inherit_rpath, $1)=no
+-_LT_TAGVAR(module_cmds, $1)=
+-_LT_TAGVAR(module_expsym_cmds, $1)=
+-_LT_TAGVAR(link_all_deplibs, $1)=unknown
+-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+-_LT_TAGVAR(no_undefined_flag, $1)=
+-_LT_TAGVAR(whole_archive_flag_spec, $1)=
+-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+-
+-# Source file extension for fc test sources.
+-ac_ext=${ac_fc_srcext-f}
+-
+-# Object file extension for compiled fc test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
+-
+-# No sense in running all these tests if we already determined that
+-# the FC compiler isn't working. Some variables (like enable_shared)
+-# are currently assumed to apply to all compilers on this platform,
+-# and will be corrupted by setting them based on a non-working compiler.
+-if test "$_lt_disable_FC" != yes; then
+- # Code to be used in simple compile tests
+- lt_simple_compile_test_code="\
+- subroutine t
+- return
+- end
+-"
+-
+- # Code to be used in simple link tests
+- lt_simple_link_test_code="\
+- program t
+- end
+-"
+-
+- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+- _LT_TAG_COMPILER
+-
+- # save warnings/boilerplate of simple test code
+- _LT_COMPILER_BOILERPLATE
+- _LT_LINKER_BOILERPLATE
+-
+- # Allow CC to be a program name with arguments.
+- lt_save_CC="$CC"
+- lt_save_GCC=$GCC
+- CC=${FC-"f95"}
+- compiler=$CC
+- GCC=$ac_cv_fc_compiler_gnu
+-
+- _LT_TAGVAR(compiler, $1)=$CC
+- _LT_CC_BASENAME([$compiler])
+-
+- if test -n "$compiler"; then
+- AC_MSG_CHECKING([if libtool supports shared libraries])
+- AC_MSG_RESULT([$can_build_shared])
+-
+- AC_MSG_CHECKING([whether to build shared libraries])
+- test "$can_build_shared" = "no" && enable_shared=no
+-
+- # On AIX, shared libraries and static libraries use the same namespace, and
+- # are all built from PIC.
+- case $host_os in
+- aix3*)
+- test "$enable_shared" = yes && enable_static=no
+- if test -n "$RANLIB"; then
+- archive_cmds="$archive_cmds~\$RANLIB \$lib"
+- postinstall_cmds='$RANLIB $lib'
+- fi
+- ;;
+- aix[[4-9]]*)
+- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+- test "$enable_shared" = yes && enable_static=no
+- fi
+- ;;
+- esac
+- AC_MSG_RESULT([$enable_shared])
+-
+- AC_MSG_CHECKING([whether to build static libraries])
+- # Make sure either enable_shared or enable_static is yes.
+- test "$enable_shared" = yes || enable_static=yes
+- AC_MSG_RESULT([$enable_static])
+-
+- _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+- _LT_TAGVAR(LD, $1)="$LD"
+-
+- ## CAVEAT EMPTOR:
+- ## There is no encapsulation within the following macros, do not change
+- ## the running order or otherwise move them around unless you know exactly
+- ## what you are doing...
+- _LT_SYS_HIDDEN_LIBDEPS($1)
+- _LT_COMPILER_PIC($1)
+- _LT_COMPILER_C_O($1)
+- _LT_COMPILER_FILE_LOCKS($1)
+- _LT_LINKER_SHLIBS($1)
+- _LT_SYS_DYNAMIC_LINKER($1)
+- _LT_LINKER_HARDCODE_LIBPATH($1)
+-
+- _LT_CONFIG($1)
+- fi # test -n "$compiler"
+-
+- GCC=$lt_save_GCC
+- CC="$lt_save_CC"
+-fi # test "$_lt_disable_FC" != yes
+-
+-AC_LANG_POP
+-])# _LT_LANG_FC_CONFIG
+-
+-
+-# _LT_LANG_GCJ_CONFIG([TAG])
+-# --------------------------
+-# Ensure that the configuration variables for the GNU Java Compiler compiler
+-# are suitably defined. These variables are subsequently used by _LT_CONFIG
+-# to write the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_GCJ_CONFIG],
+-[AC_REQUIRE([LT_PROG_GCJ])dnl
+-AC_LANG_SAVE
+-
+-# Source file extension for Java test sources.
+-ac_ext=java
+-
+-# Object file extension for compiled Java test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
+-
+-# Code to be used in simple compile tests
+-lt_simple_compile_test_code="class foo {}"
+-
+-# Code to be used in simple link tests
+-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+-
+-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+-_LT_TAG_COMPILER
+-
+-# save warnings/boilerplate of simple test code
+-_LT_COMPILER_BOILERPLATE
+-_LT_LINKER_BOILERPLATE
+-
+-# Allow CC to be a program name with arguments.
+-lt_save_CC="$CC"
+-lt_save_GCC=$GCC
+-GCC=yes
+-CC=${GCJ-"gcj"}
+-compiler=$CC
+-_LT_TAGVAR(compiler, $1)=$CC
+-_LT_TAGVAR(LD, $1)="$LD"
+-_LT_CC_BASENAME([$compiler])
+-
+-# GCJ did not exist at the time GCC didn't implicitly link libc in.
+-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+-
+-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+-
+-## CAVEAT EMPTOR:
+-## There is no encapsulation within the following macros, do not change
+-## the running order or otherwise move them around unless you know exactly
+-## what you are doing...
+-if test -n "$compiler"; then
+- _LT_COMPILER_NO_RTTI($1)
+- _LT_COMPILER_PIC($1)
+- _LT_COMPILER_C_O($1)
+- _LT_COMPILER_FILE_LOCKS($1)
+- _LT_LINKER_SHLIBS($1)
+- _LT_LINKER_HARDCODE_LIBPATH($1)
+-
+- _LT_CONFIG($1)
+-fi
+-
+-AC_LANG_RESTORE
+-
+-GCC=$lt_save_GCC
+-CC="$lt_save_CC"
+-])# _LT_LANG_GCJ_CONFIG
+-
+-
+-# _LT_LANG_RC_CONFIG([TAG])
+-# -------------------------
+-# Ensure that the configuration variables for the Windows resource compiler
+-# are suitably defined. These variables are subsequently used by _LT_CONFIG
+-# to write the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_RC_CONFIG],
+-[AC_REQUIRE([LT_PROG_RC])dnl
+-AC_LANG_SAVE
+-
+-# Source file extension for RC test sources.
+-ac_ext=rc
+-
+-# Object file extension for compiled RC test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
+-
+-# Code to be used in simple compile tests
+-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+-
+-# Code to be used in simple link tests
+-lt_simple_link_test_code="$lt_simple_compile_test_code"
+-
+-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+-_LT_TAG_COMPILER
+-
+-# save warnings/boilerplate of simple test code
+-_LT_COMPILER_BOILERPLATE
+-_LT_LINKER_BOILERPLATE
+-
+-# Allow CC to be a program name with arguments.
+-lt_save_CC="$CC"
+-lt_save_GCC=$GCC
+-GCC=
+-CC=${RC-"windres"}
+-compiler=$CC
+-_LT_TAGVAR(compiler, $1)=$CC
+-_LT_CC_BASENAME([$compiler])
+-_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+-
+-if test -n "$compiler"; then
+- :
+- _LT_CONFIG($1)
+-fi
+-
+-GCC=$lt_save_GCC
+-AC_LANG_RESTORE
+-CC="$lt_save_CC"
+-])# _LT_LANG_RC_CONFIG
+-
+-
+-# LT_PROG_GCJ
+-# -----------
+-AC_DEFUN([LT_PROG_GCJ],
+-[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+- [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+- [AC_CHECK_TOOL(GCJ, gcj,)
+- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+- AC_SUBST(GCJFLAGS)])])[]dnl
+-])
+-
+-# Old name:
+-AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+-
+-
+-# LT_PROG_RC
+-# ----------
+-AC_DEFUN([LT_PROG_RC],
+-[AC_CHECK_TOOL(RC, windres,)
+-])
+-
+-# Old name:
+-AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([LT_AC_PROG_RC], [])
+-
+-
+-# _LT_DECL_EGREP
+-# --------------
+-# If we don't have a new enough Autoconf to choose the best grep
+-# available, choose the one first in the user's PATH.
+-m4_defun([_LT_DECL_EGREP],
+-[AC_REQUIRE([AC_PROG_EGREP])dnl
+-AC_REQUIRE([AC_PROG_FGREP])dnl
+-test -z "$GREP" && GREP=grep
+-_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+-_LT_DECL([], [EGREP], [1], [An ERE matcher])
+-_LT_DECL([], [FGREP], [1], [A literal string matcher])
+-dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+-AC_SUBST([GREP])
+-])
+-
+-
+-# _LT_DECL_OBJDUMP
+-# --------------
+-# If we don't have a new enough Autoconf to choose the best objdump
+-# available, choose the one first in the user's PATH.
+-m4_defun([_LT_DECL_OBJDUMP],
+-[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+-test -z "$OBJDUMP" && OBJDUMP=objdump
+-_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+-AC_SUBST([OBJDUMP])
+-])
+-
+-
+-# _LT_DECL_SED
+-# ------------
+-# Check for a fully-functional sed program, that truncates
+-# as few characters as possible. Prefer GNU sed if found.
+-m4_defun([_LT_DECL_SED],
+-[AC_PROG_SED
+-test -z "$SED" && SED=sed
+-Xsed="$SED -e 1s/^X//"
+-_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+-_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+- [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+-])# _LT_DECL_SED
+-
+-m4_ifndef([AC_PROG_SED], [
+-############################################################
+-# NOTE: This macro has been submitted for inclusion into #
+-# GNU Autoconf as AC_PROG_SED. When it is available in #
+-# a released version of Autoconf we should remove this #
+-# macro and use it instead. #
+-############################################################
+-
+-m4_defun([AC_PROG_SED],
+-[AC_MSG_CHECKING([for a sed that does not truncate output])
+-AC_CACHE_VAL(lt_cv_path_SED,
+-[# Loop through the user's path and test for sed and gsed.
+-# Then use that list of sed's as ones to test for truncation.
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+- IFS=$as_save_IFS
+- test -z "$as_dir" && as_dir=.
+- for lt_ac_prog in sed gsed; do
+- for ac_exec_ext in '' $ac_executable_extensions; do
+- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+- fi
+- done
+- done
+-done
+-IFS=$as_save_IFS
+-lt_ac_max=0
+-lt_ac_count=0
+-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+-# along with /bin/sed that truncates output.
+-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+- test ! -f $lt_ac_sed && continue
+- cat /dev/null > conftest.in
+- lt_ac_count=0
+- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+- # Check for GNU sed and select it if it is found.
+- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+- lt_cv_path_SED=$lt_ac_sed
+- break
+- fi
+- while true; do
+- cat conftest.in conftest.in >conftest.tmp
+- mv conftest.tmp conftest.in
+- cp conftest.in conftest.nl
+- echo >>conftest.nl
+- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+- cmp -s conftest.out conftest.nl || break
+- # 10000 chars as input seems more than enough
+- test $lt_ac_count -gt 10 && break
+- lt_ac_count=`expr $lt_ac_count + 1`
+- if test $lt_ac_count -gt $lt_ac_max; then
+- lt_ac_max=$lt_ac_count
+- lt_cv_path_SED=$lt_ac_sed
+- fi
+- done
+-done
+-])
+-SED=$lt_cv_path_SED
+-AC_SUBST([SED])
+-AC_MSG_RESULT([$SED])
+-])#AC_PROG_SED
+-])#m4_ifndef
+-
+-# Old name:
+-AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([LT_AC_PROG_SED], [])
+-
+-
+-# _LT_CHECK_SHELL_FEATURES
+-# ------------------------
+-# Find out whether the shell is Bourne or XSI compatible,
+-# or has some other useful features.
+-m4_defun([_LT_CHECK_SHELL_FEATURES],
+-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+-# Try some XSI features
+-xsi_shell=no
+-( _lt_dummy="a/b/c"
+- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+- = c,a/b,, \
+- && eval 'test $(( 1 + 1 )) -eq 2 \
+- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+- && xsi_shell=yes
+-AC_MSG_RESULT([$xsi_shell])
+-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+-
+-AC_MSG_CHECKING([whether the shell understands "+="])
+-lt_shell_append=no
+-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+- >/dev/null 2>&1 \
+- && lt_shell_append=yes
+-AC_MSG_RESULT([$lt_shell_append])
+-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+-
+-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+- lt_unset=unset
+-else
+- lt_unset=false
+-fi
+-_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+-
+-# test EBCDIC or ASCII
+-case `echo X|tr X '\101'` in
+- A) # ASCII based system
+- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+- lt_SP2NL='tr \040 \012'
+- lt_NL2SP='tr \015\012 \040\040'
+- ;;
+- *) # EBCDIC based system
+- lt_SP2NL='tr \100 \n'
+- lt_NL2SP='tr \r\n \100\100'
+- ;;
+-esac
+-_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+-_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+-])# _LT_CHECK_SHELL_FEATURES
+-
+-
+-# _LT_PROG_XSI_SHELLFNS
+-# ---------------------
+-# Bourne and XSI compatible variants of some useful shell functions.
+-m4_defun([_LT_PROG_XSI_SHELLFNS],
+-[case $xsi_shell in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_dirname_and_basename file append nondir_replacement
+-# perform func_basename and func_dirname in a single function
+-# call:
+-# dirname: Compute the dirname of FILE. If nonempty,
+-# add APPEND to the result, otherwise set result
+-# to NONDIR_REPLACEMENT.
+-# value returned in "$func_dirname_result"
+-# basename: Compute filename of FILE.
+-# value retuned in "$func_basename_result"
+-# Implementation must be kept synchronized with func_dirname
+-# and func_basename. For efficiency, we do not delegate to
+-# those functions but instead duplicate the functionality here.
+-func_dirname_and_basename ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-func_stripname ()
+-{
+- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+- # positional parameters, so assign one to ordinary parameter first.
+- func_stripname_result=${3}
+- func_stripname_result=${func_stripname_result#"${1}"}
+- func_stripname_result=${func_stripname_result%"${2}"}
+-}
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=${1%%=*}
+- func_opt_split_arg=${1#*=}
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+- case ${1} in
+- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+- *) func_lo2o_result=${1} ;;
+- esac
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=${1%.*}.lo
+-}
+-
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=$(( $[*] ))
+-}
+-
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=${#1}
+-}
+-
+-_LT_EOF
+- ;;
+- *) # Bourne compatible functions.
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- # Extract subdirectory from the argument.
+- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+- if test "X$func_dirname_result" = "X${1}"; then
+- func_dirname_result="${3}"
+- else
+- func_dirname_result="$func_dirname_result${2}"
+- fi
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+-}
+-
+-dnl func_dirname_and_basename
+-dnl A portable version of this function is already defined in general.m4sh
+-dnl so there is no need for it here.
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-# func_strip_suffix prefix name
+-func_stripname ()
+-{
+- case ${2} in
+- .*) func_stripname_result=`$ECHO "X${3}" \
+- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+- *) func_stripname_result=`$ECHO "X${3}" \
+- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+- esac
+-}
+-
+-# sed scripts:
+-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+-my_sed_long_arg='1s/^-[[^=]]*=//'
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+-}
+-
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=`expr "$[@]"`
+-}
+-
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+-}
+-
+-_LT_EOF
+-esac
+-
+-case $lt_shell_append in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$[1]+=\$[2]"
+-}
+-_LT_EOF
+- ;;
+- *)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$[1]=\$$[1]\$[2]"
+-}
+-
+-_LT_EOF
+- ;;
+- esac
+-])
+Index: libiconv-1.13.1/libcharset/m4/ltoptions.m4
+===================================================================
+--- libiconv-1.13.1.orig/libcharset/m4/ltoptions.m4
++++ /dev/null
+@@ -1,368 +0,0 @@
+-# Helper functions for option handling. -*- Autoconf -*-
+-#
+-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+-# Written by Gary V. Vaughan, 2004
+-#
+-# This file is free software; the Free Software Foundation gives
+-# unlimited permission to copy and/or distribute it, with or without
+-# modifications, as long as this notice is preserved.
+-
+-# serial 6 ltoptions.m4
+-
+-# This is to help aclocal find these macros, as it can't see m4_define.
+-AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+-
+-
+-# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+-# ------------------------------------------
+-m4_define([_LT_MANGLE_OPTION],
+-[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+-
+-
+-# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+-# ---------------------------------------
+-# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+-# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+-# saved as a flag.
+-m4_define([_LT_SET_OPTION],
+-[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+-m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+- _LT_MANGLE_DEFUN([$1], [$2]),
+- [m4_warning([Unknown $1 option `$2'])])[]dnl
+-])
+-
+-
+-# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+-# ------------------------------------------------------------
+-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+-m4_define([_LT_IF_OPTION],
+-[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+-
+-
+-# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+-# -------------------------------------------------------
+-# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+-# are set.
+-m4_define([_LT_UNLESS_OPTIONS],
+-[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+- [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+- [m4_define([$0_found])])])[]dnl
+-m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+-])[]dnl
+-])
+-
+-
+-# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+-# ----------------------------------------
+-# OPTION-LIST is a space-separated list of Libtool options associated
+-# with MACRO-NAME. If any OPTION has a matching handler declared with
+-# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+-# the unknown option and exit.
+-m4_defun([_LT_SET_OPTIONS],
+-[# Set options
+-m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+- [_LT_SET_OPTION([$1], _LT_Option)])
+-
+-m4_if([$1],[LT_INIT],[
+- dnl
+- dnl Simply set some default values (i.e off) if boolean options were not
+- dnl specified:
+- _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+- ])
+- _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+- ])
+- dnl
+- dnl If no reference was made to various pairs of opposing options, then
+- dnl we run the default mode handler for the pair. For example, if neither
+- dnl `shared' nor `disable-shared' was passed, we enable building of shared
+- dnl archives by default:
+- _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+- _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+- _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+- _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+- [_LT_ENABLE_FAST_INSTALL])
+- ])
+-])# _LT_SET_OPTIONS
+-
+-
+-## --------------------------------- ##
+-## Macros to handle LT_INIT options. ##
+-## --------------------------------- ##
+-
+-# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+-# -----------------------------------------
+-m4_define([_LT_MANGLE_DEFUN],
+-[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+-
+-
+-# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+-# -----------------------------------------------
+-m4_define([LT_OPTION_DEFINE],
+-[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+-])# LT_OPTION_DEFINE
+-
+-
+-# dlopen
+-# ------
+-LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+-])
+-
+-AU_DEFUN([AC_LIBTOOL_DLOPEN],
+-[_LT_SET_OPTION([LT_INIT], [dlopen])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you
+-put the `dlopen' option into LT_INIT's first parameter.])
+-])
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+-
+-
+-# win32-dll
+-# ---------
+-# Declare package support for building win32 dll's.
+-LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+-[enable_win32_dll=yes
+-
+-case $host in
+-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+- AC_CHECK_TOOL(AS, as, false)
+- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+- AC_CHECK_TOOL(OBJDUMP, objdump, false)
+- ;;
+-esac
+-
+-test -z "$AS" && AS=as
+-_LT_DECL([], [AS], [0], [Assembler program])dnl
+-
+-test -z "$DLLTOOL" && DLLTOOL=dlltool
+-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
+-
+-test -z "$OBJDUMP" && OBJDUMP=objdump
+-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+-])# win32-dll
+-
+-AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-_LT_SET_OPTION([LT_INIT], [win32-dll])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you
+-put the `win32-dll' option into LT_INIT's first parameter.])
+-])
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+-
+-
+-# _LT_ENABLE_SHARED([DEFAULT])
+-# ----------------------------
+-# implement the --enable-shared flag, and supports the `shared' and
+-# `disable-shared' LT_INIT options.
+-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+-m4_define([_LT_ENABLE_SHARED],
+-[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+-AC_ARG_ENABLE([shared],
+- [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+- [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+- [p=${PACKAGE-default}
+- case $enableval in
+- yes) enable_shared=yes ;;
+- no) enable_shared=no ;;
+- *)
+- enable_shared=no
+- # Look at the argument we got. We use all the common list separators.
+- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+- for pkg in $enableval; do
+- IFS="$lt_save_ifs"
+- if test "X$pkg" = "X$p"; then
+- enable_shared=yes
+- fi
+- done
+- IFS="$lt_save_ifs"
+- ;;
+- esac],
+- [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+-
+- _LT_DECL([build_libtool_libs], [enable_shared], [0],
+- [Whether or not to build shared libraries])
+-])# _LT_ENABLE_SHARED
+-
+-LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+-LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+-
+-# Old names:
+-AC_DEFUN([AC_ENABLE_SHARED],
+-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+-])
+-
+-AC_DEFUN([AC_DISABLE_SHARED],
+-[_LT_SET_OPTION([LT_INIT], [disable-shared])
+-])
+-
+-AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+-AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+-dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+-
+-
+-
+-# _LT_ENABLE_STATIC([DEFAULT])
+-# ----------------------------
+-# implement the --enable-static flag, and support the `static' and
+-# `disable-static' LT_INIT options.
+-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+-m4_define([_LT_ENABLE_STATIC],
+-[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+-AC_ARG_ENABLE([static],
+- [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+- [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+- [p=${PACKAGE-default}
+- case $enableval in
+- yes) enable_static=yes ;;
+- no) enable_static=no ;;
+- *)
+- enable_static=no
+- # Look at the argument we got. We use all the common list separators.
+- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+- for pkg in $enableval; do
+- IFS="$lt_save_ifs"
+- if test "X$pkg" = "X$p"; then
+- enable_static=yes
+- fi
+- done
+- IFS="$lt_save_ifs"
+- ;;
+- esac],
+- [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+-
+- _LT_DECL([build_old_libs], [enable_static], [0],
+- [Whether or not to build static libraries])
+-])# _LT_ENABLE_STATIC
+-
+-LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+-LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+-
+-# Old names:
+-AC_DEFUN([AC_ENABLE_STATIC],
+-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+-])
+-
+-AC_DEFUN([AC_DISABLE_STATIC],
+-[_LT_SET_OPTION([LT_INIT], [disable-static])
+-])
+-
+-AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+-AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+-dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+-
+-
+-
+-# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+-# ----------------------------------
+-# implement the --enable-fast-install flag, and support the `fast-install'
+-# and `disable-fast-install' LT_INIT options.
+-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+-m4_define([_LT_ENABLE_FAST_INSTALL],
+-[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+-AC_ARG_ENABLE([fast-install],
+- [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+- [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+- [p=${PACKAGE-default}
+- case $enableval in
+- yes) enable_fast_install=yes ;;
+- no) enable_fast_install=no ;;
+- *)
+- enable_fast_install=no
+- # Look at the argument we got. We use all the common list separators.
+- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+- for pkg in $enableval; do
+- IFS="$lt_save_ifs"
+- if test "X$pkg" = "X$p"; then
+- enable_fast_install=yes
+- fi
+- done
+- IFS="$lt_save_ifs"
+- ;;
+- esac],
+- [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+-
+-_LT_DECL([fast_install], [enable_fast_install], [0],
+- [Whether or not to optimize for fast installation])dnl
+-])# _LT_ENABLE_FAST_INSTALL
+-
+-LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+-LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+-
+-# Old names:
+-AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+-the `fast-install' option into LT_INIT's first parameter.])
+-])
+-
+-AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+-[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+-the `disable-fast-install' option into LT_INIT's first parameter.])
+-])
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+-dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+-
+-
+-# _LT_WITH_PIC([MODE])
+-# --------------------
+-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+-# LT_INIT options.
+-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+-m4_define([_LT_WITH_PIC],
+-[AC_ARG_WITH([pic],
+- [AS_HELP_STRING([--with-pic],
+- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+- [pic_mode="$withval"],
+- [pic_mode=default])
+-
+-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+-
+-_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+-])# _LT_WITH_PIC
+-
+-LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+-LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+-
+-# Old name:
+-AU_DEFUN([AC_LIBTOOL_PICMODE],
+-[_LT_SET_OPTION([LT_INIT], [pic-only])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you
+-put the `pic-only' option into LT_INIT's first parameter.])
+-])
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+-
+-## ----------------- ##
+-## LTDL_INIT Options ##
+-## ----------------- ##
+-
+-m4_define([_LTDL_MODE], [])
+-LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+- [m4_define([_LTDL_MODE], [nonrecursive])])
+-LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+- [m4_define([_LTDL_MODE], [recursive])])
+-LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+- [m4_define([_LTDL_MODE], [subproject])])
+-
+-m4_define([_LTDL_TYPE], [])
+-LT_OPTION_DEFINE([LTDL_INIT], [installable],
+- [m4_define([_LTDL_TYPE], [installable])])
+-LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+- [m4_define([_LTDL_TYPE], [convenience])])
+Index: libiconv-1.13.1/libcharset/m4/ltsugar.m4
+===================================================================
+--- libiconv-1.13.1.orig/libcharset/m4/ltsugar.m4
++++ /dev/null
+@@ -1,123 +0,0 @@
+-# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
+-#
+-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+-# Written by Gary V. Vaughan, 2004
+-#
+-# This file is free software; the Free Software Foundation gives
+-# unlimited permission to copy and/or distribute it, with or without
+-# modifications, as long as this notice is preserved.
+-
+-# serial 6 ltsugar.m4
+-
+-# This is to help aclocal find these macros, as it can't see m4_define.
+-AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+-
+-
+-# lt_join(SEP, ARG1, [ARG2...])
+-# -----------------------------
+-# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+-# associated separator.
+-# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+-# versions in m4sugar had bugs.
+-m4_define([lt_join],
+-[m4_if([$#], [1], [],
+- [$#], [2], [[$2]],
+- [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+-m4_define([_lt_join],
+-[m4_if([$#$2], [2], [],
+- [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+-
+-
+-# lt_car(LIST)
+-# lt_cdr(LIST)
+-# ------------
+-# Manipulate m4 lists.
+-# These macros are necessary as long as will still need to support
+-# Autoconf-2.59 which quotes differently.
+-m4_define([lt_car], [[$1]])
+-m4_define([lt_cdr],
+-[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+- [$#], 1, [],
+- [m4_dquote(m4_shift($@))])])
+-m4_define([lt_unquote], $1)
+-
+-
+-# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+-# ------------------------------------------
+-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+-# Note that neither SEPARATOR nor STRING are expanded; they are appended
+-# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+-# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+-# than defined and empty).
+-#
+-# This macro is needed until we can rely on Autoconf 2.62, since earlier
+-# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+-m4_define([lt_append],
+-[m4_define([$1],
+- m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+-
+-
+-
+-# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+-# ----------------------------------------------------------
+-# Produce a SEP delimited list of all paired combinations of elements of
+-# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
+-# has the form PREFIXmINFIXSUFFIXn.
+-# Needed until we can rely on m4_combine added in Autoconf 2.62.
+-m4_define([lt_combine],
+-[m4_if(m4_eval([$# > 3]), [1],
+- [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+-[[m4_foreach([_Lt_prefix], [$2],
+- [m4_foreach([_Lt_suffix],
+- ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+- [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+-
+-
+-# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+-# -----------------------------------------------------------------------
+-# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+-# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+-m4_define([lt_if_append_uniq],
+-[m4_ifdef([$1],
+- [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+- [lt_append([$1], [$2], [$3])$4],
+- [$5])],
+- [lt_append([$1], [$2], [$3])$4])])
+-
+-
+-# lt_dict_add(DICT, KEY, VALUE)
+-# -----------------------------
+-m4_define([lt_dict_add],
+-[m4_define([$1($2)], [$3])])
+-
+-
+-# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+-# --------------------------------------------
+-m4_define([lt_dict_add_subkey],
+-[m4_define([$1($2:$3)], [$4])])
+-
+-
+-# lt_dict_fetch(DICT, KEY, [SUBKEY])
+-# ----------------------------------
+-m4_define([lt_dict_fetch],
+-[m4_ifval([$3],
+- m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+- m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+-
+-
+-# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+-# -----------------------------------------------------------------
+-m4_define([lt_if_dict_fetch],
+-[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+- [$5],
+- [$6])])
+-
+-
+-# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+-# --------------------------------------------------------------
+-m4_define([lt_dict_filter],
+-[m4_if([$5], [], [],
+- [lt_join(m4_quote(m4_default([$4], [[, ]])),
+- lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+- [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+-])
+Index: libiconv-1.13.1/libcharset/m4/ltversion.m4
+===================================================================
+--- libiconv-1.13.1.orig/libcharset/m4/ltversion.m4
++++ /dev/null
+@@ -1,23 +0,0 @@
+-# ltversion.m4 -- version numbers -*- Autoconf -*-
+-#
+-# Copyright (C) 2004 Free Software Foundation, Inc.
+-# Written by Scott James Remnant, 2004
+-#
+-# This file is free software; the Free Software Foundation gives
+-# unlimited permission to copy and/or distribute it, with or without
+-# modifications, as long as this notice is preserved.
+-
+-# Generated from ltversion.in.
+-
+-# serial 3012 ltversion.m4
+-# This file is part of GNU Libtool
+-
+-m4_define([LT_PACKAGE_VERSION], [2.2.6])
+-m4_define([LT_PACKAGE_REVISION], [1.3012])
+-
+-AC_DEFUN([LTVERSION_VERSION],
+-[macro_version='2.2.6'
+-macro_revision='1.3012'
+-_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+-_LT_DECL(, macro_revision, 0)
+-])
+Index: libiconv-1.13.1/libcharset/m4/lt~obsolete.m4
+===================================================================
+--- libiconv-1.13.1.orig/libcharset/m4/lt~obsolete.m4
++++ /dev/null
+@@ -1,92 +0,0 @@
+-# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+-#
+-# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+-# Written by Scott James Remnant, 2004.
+-#
+-# This file is free software; the Free Software Foundation gives
+-# unlimited permission to copy and/or distribute it, with or without
+-# modifications, as long as this notice is preserved.
+-
+-# serial 4 lt~obsolete.m4
+-
+-# These exist entirely to fool aclocal when bootstrapping libtool.
+-#
+-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+-# which have later been changed to m4_define as they aren't part of the
+-# exported API, or moved to Autoconf or Automake where they belong.
+-#
+-# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
+-# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+-# using a macro with the same name in our local m4/libtool.m4 it'll
+-# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+-# and doesn't know about Autoconf macros at all.)
+-#
+-# So we provide this file, which has a silly filename so it's always
+-# included after everything else. This provides aclocal with the
+-# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+-# because those macros already exist, or will be overwritten later.
+-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+-#
+-# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+-# Yes, that means every name once taken will need to remain here until
+-# we give up compatibility with versions before 1.7, at which point
+-# we need to keep only those names which we still refer to.
+-
+-# This is to help aclocal find these macros, as it can't see m4_define.
+-AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+-
+-m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
+-m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+-m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
+-m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+-m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
+-m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
+-m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+-m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
+-m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
+-m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
+-m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+-m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+-m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+-m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+-m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+-m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
+-m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+-m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+-m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
+-m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
+-m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+-m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+-m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+-m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+-m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+-m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
+-m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
+-m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
+-m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+-m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+-m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
+-m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
+-m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+-m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+-m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
+-m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+-m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+-m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+-m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+-m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])])
+-m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+-m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+Index: libiconv-1.13.1/m4/libtool.m4
+===================================================================
+--- libiconv-1.13.1.orig/m4/libtool.m4
++++ /dev/null
+@@ -1,7357 +0,0 @@
+-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+-#
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008 Free Software Foundation, Inc.
+-# Written by Gordon Matzigkeit, 1996
+-#
+-# This file is free software; the Free Software Foundation gives
+-# unlimited permission to copy and/or distribute it, with or without
+-# modifications, as long as this notice is preserved.
+-
+-m4_define([_LT_COPYING], [dnl
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008 Free Software Foundation, Inc.
+-# Written by Gordon Matzigkeit, 1996
+-#
+-# This file is part of GNU Libtool.
+-#
+-# GNU Libtool is free software; you can redistribute it and/or
+-# modify it under the terms of the GNU General Public License as
+-# published by the Free Software Foundation; either version 2 of
+-# the License, or (at your option) any later version.
+-#
+-# As a special exception to the GNU General Public License,
+-# if you distribute this file as part of a program or library that
+-# is built using GNU Libtool, you may include this file under the
+-# same distribution terms that you use for the rest of that program.
+-#
+-# GNU Libtool is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-#
+-# You should have received a copy of the GNU General Public License
+-# along with GNU Libtool; see the file COPYING. If not, a copy
+-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+-# obtained by writing to the Free Software Foundation, Inc.,
+-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+-])
+-
+-# serial 56 LT_INIT
+-
+-
+-# LT_PREREQ(VERSION)
+-# ------------------
+-# Complain and exit if this libtool version is less that VERSION.
+-m4_defun([LT_PREREQ],
+-[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+- [m4_default([$3],
+- [m4_fatal([Libtool version $1 or higher is required],
+- 63)])],
+- [$2])])
+-
+-
+-# _LT_CHECK_BUILDDIR
+-# ------------------
+-# Complain if the absolute build directory name contains unusual characters
+-m4_defun([_LT_CHECK_BUILDDIR],
+-[case `pwd` in
+- *\ * | *\ *)
+- AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+-esac
+-])
+-
+-
+-# LT_INIT([OPTIONS])
+-# ------------------
+-AC_DEFUN([LT_INIT],
+-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+-AC_BEFORE([$0], [LT_LANG])dnl
+-AC_BEFORE([$0], [LT_OUTPUT])dnl
+-AC_BEFORE([$0], [LTDL_INIT])dnl
+-m4_require([_LT_CHECK_BUILDDIR])dnl
+-
+-dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+-m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+-m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+-dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+-dnl unless we require an AC_DEFUNed macro:
+-AC_REQUIRE([LTOPTIONS_VERSION])dnl
+-AC_REQUIRE([LTSUGAR_VERSION])dnl
+-AC_REQUIRE([LTVERSION_VERSION])dnl
+-AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+-m4_require([_LT_PROG_LTMAIN])dnl
+-
+-dnl Parse OPTIONS
+-_LT_SET_OPTIONS([$0], [$1])
+-
+-# This can be used to rebuild libtool when needed
+-LIBTOOL_DEPS="$ltmain"
+-
+-# Always use our own libtool.
+-LIBTOOL="${CONFIG_SHELL-$SHELL} "'$(top_builddir)/libtool'
+-AC_SUBST(LIBTOOL)dnl
+-
+-_LT_SETUP
+-
+-# Only expand once:
+-m4_define([LT_INIT])
+-])# LT_INIT
+-
+-# Old names:
+-AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+-AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+-dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+-
+-
+-# _LT_CC_BASENAME(CC)
+-# -------------------
+-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+-m4_defun([_LT_CC_BASENAME],
+-[for cc_temp in $1""; do
+- case $cc_temp in
+- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+- \-*) ;;
+- *) break;;
+- esac
+-done
+-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+-])
+-
+-
+-# _LT_FILEUTILS_DEFAULTS
+-# ----------------------
+-# It is okay to use these file commands and assume they have been set
+-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+-m4_defun([_LT_FILEUTILS_DEFAULTS],
+-[: ${CP="cp -f"}
+-: ${MV="mv -f"}
+-: ${RM="rm -f"}
+-])# _LT_FILEUTILS_DEFAULTS
+-
+-
+-# _LT_SETUP
+-# ---------
+-m4_defun([_LT_SETUP],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+-_LT_DECL([], [host_alias], [0], [The host system])dnl
+-_LT_DECL([], [host], [0])dnl
+-_LT_DECL([], [host_os], [0])dnl
+-dnl
+-_LT_DECL([], [build_alias], [0], [The build system])dnl
+-_LT_DECL([], [build], [0])dnl
+-_LT_DECL([], [build_os], [0])dnl
+-dnl
+-AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([LT_PATH_LD])dnl
+-AC_REQUIRE([LT_PATH_NM])dnl
+-dnl
+-AC_REQUIRE([AC_PROG_LN_S])dnl
+-test -z "$LN_S" && LN_S="ln -s"
+-_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+-dnl
+-AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+-_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+-_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+-dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+-m4_require([_LT_CMD_RELOAD])dnl
+-m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+-m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+-
+-_LT_CONFIG_LIBTOOL_INIT([
+-# See if we are running on zsh, and set the options which allow our
+-# commands through without removal of \ escapes INIT.
+-if test -n "\${ZSH_VERSION+set}" ; then
+- setopt NO_GLOB_SUBST
+-fi
+-])
+-if test -n "${ZSH_VERSION+set}" ; then
+- setopt NO_GLOB_SUBST
+-fi
+-
+-_LT_CHECK_OBJDIR
+-
+-m4_require([_LT_TAG_COMPILER])dnl
+-_LT_PROG_ECHO_BACKSLASH
+-
+-case $host_os in
+-aix3*)
+- # AIX sometimes has problems with the GCC collect2 program. For some
+- # reason, if we set the COLLECT_NAMES environment variable, the problems
+- # vanish in a puff of smoke.
+- if test "X${COLLECT_NAMES+set}" != Xset; then
+- COLLECT_NAMES=
+- export COLLECT_NAMES
+- fi
+- ;;
+-esac
+-
+-# Sed substitution that helps us do robust quoting. It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+-
+-# Same as above, but do not quote variable references.
+-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+-
+-# Sed substitution to delay expansion of an escaped shell variable in a
+-# double_quote_subst'ed string.
+-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+-
+-# Sed substitution to delay expansion of an escaped single quote.
+-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+-
+-# Sed substitution to avoid accidental globbing in evaled expressions
+-no_glob_subst='s/\*/\\\*/g'
+-
+-# Global variables:
+-ofile=libtool
+-can_build_shared=yes
+-
+-# All known linkers require a `.a' archive for static linking (except MSVC,
+-# which needs '.lib').
+-libext=a
+-
+-with_gnu_ld="$lt_cv_prog_gnu_ld"
+-
+-old_CC="$CC"
+-old_CFLAGS="$CFLAGS"
+-
+-# Set sane defaults for various variables
+-test -z "$CC" && CC=cc
+-test -z "$LTCC" && LTCC=$CC
+-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+-test -z "$LD" && LD=ld
+-test -z "$ac_objext" && ac_objext=o
+-
+-_LT_CC_BASENAME([$compiler])
+-
+-# Only perform the check for file, if the check method requires it
+-test -z "$MAGIC_CMD" && MAGIC_CMD=file
+-case $deplibs_check_method in
+-file_magic*)
+- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+- _LT_PATH_MAGIC
+- fi
+- ;;
+-esac
+-
+-# Use C for the default configuration in the libtool script
+-LT_SUPPORTED_TAG([CC])
+-_LT_LANG_C_CONFIG
+-_LT_LANG_DEFAULT_CONFIG
+-_LT_CONFIG_COMMANDS
+-])# _LT_SETUP
+-
+-
+-# _LT_PROG_LTMAIN
+-# ---------------
+-# Note that this code is called both from `configure', and `config.status'
+-# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+-# `config.status' has no value for ac_aux_dir unless we are using Automake,
+-# so we pass a copy along to make sure it has a sensible value anyway.
+-m4_defun([_LT_PROG_LTMAIN],
+-[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+-_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+-ltmain="$ac_aux_dir/ltmain.sh"
+-])# _LT_PROG_LTMAIN
+-
+-
+-## ------------------------------------- ##
+-## Accumulate code for creating libtool. ##
+-## ------------------------------------- ##
+-
+-# So that we can recreate a full libtool script including additional
+-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+-# in macros and then make a single call at the end using the `libtool'
+-# label.
+-
+-
+-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+-# ----------------------------------------
+-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+-m4_define([_LT_CONFIG_LIBTOOL_INIT],
+-[m4_ifval([$1],
+- [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+- [$1
+-])])])
+-
+-# Initialize.
+-m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+-
+-
+-# _LT_CONFIG_LIBTOOL([COMMANDS])
+-# ------------------------------
+-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+-m4_define([_LT_CONFIG_LIBTOOL],
+-[m4_ifval([$1],
+- [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+- [$1
+-])])])
+-
+-# Initialize.
+-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+-
+-
+-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+-# -----------------------------------------------------
+-m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+-[_LT_CONFIG_LIBTOOL([$1])
+-_LT_CONFIG_LIBTOOL_INIT([$2])
+-])
+-
+-
+-# _LT_FORMAT_COMMENT([COMMENT])
+-# -----------------------------
+-# Add leading comment marks to the start of each line, and a trailing
+-# full-stop to the whole comment if one is not present already.
+-m4_define([_LT_FORMAT_COMMENT],
+-[m4_ifval([$1], [
+-m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+- [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+-)])
+-
+-
+-
+-## ------------------------ ##
+-## FIXME: Eliminate VARNAME ##
+-## ------------------------ ##
+-
+-
+-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+-# -------------------------------------------------------------------
+-# CONFIGNAME is the name given to the value in the libtool script.
+-# VARNAME is the (base) name used in the configure script.
+-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+-# VARNAME. Any other value will be used directly.
+-m4_define([_LT_DECL],
+-[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+- [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+- [m4_ifval([$1], [$1], [$2])])
+- lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+- m4_ifval([$4],
+- [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+- lt_dict_add_subkey([lt_decl_dict], [$2],
+- [tagged?], [m4_ifval([$5], [yes], [no])])])
+-])
+-
+-
+-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+-# --------------------------------------------------------
+-m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+-
+-
+-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+-# ------------------------------------------------
+-m4_define([lt_decl_tag_varnames],
+-[_lt_decl_filter([tagged?], [yes], $@)])
+-
+-
+-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+-# ---------------------------------------------------------
+-m4_define([_lt_decl_filter],
+-[m4_case([$#],
+- [0], [m4_fatal([$0: too few arguments: $#])],
+- [1], [m4_fatal([$0: too few arguments: $#: $1])],
+- [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+- [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+- [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+-])
+-
+-
+-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+-# --------------------------------------------------
+-m4_define([lt_decl_quote_varnames],
+-[_lt_decl_filter([value], [1], $@)])
+-
+-
+-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+-# ---------------------------------------------------
+-m4_define([lt_decl_dquote_varnames],
+-[_lt_decl_filter([value], [2], $@)])
+-
+-
+-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+-# ---------------------------------------------------
+-m4_define([lt_decl_varnames_tagged],
+-[m4_assert([$# <= 2])dnl
+-_$0(m4_quote(m4_default([$1], [[, ]])),
+- m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+- m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+-m4_define([_lt_decl_varnames_tagged],
+-[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+-
+-
+-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+-# ------------------------------------------------
+-m4_define([lt_decl_all_varnames],
+-[_$0(m4_quote(m4_default([$1], [[, ]])),
+- m4_if([$2], [],
+- m4_quote(lt_decl_varnames),
+- m4_quote(m4_shift($@))))[]dnl
+-])
+-m4_define([_lt_decl_all_varnames],
+-[lt_join($@, lt_decl_varnames_tagged([$1],
+- lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+-])
+-
+-
+-# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+-# ------------------------------------
+-# Quote a variable value, and forward it to `config.status' so that its
+-# declaration there will have the same value as in `configure'. VARNAME
+-# must have a single quote delimited value for this to work.
+-m4_define([_LT_CONFIG_STATUS_DECLARE],
+-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+-
+-
+-# _LT_CONFIG_STATUS_DECLARATIONS
+-# ------------------------------
+-# We delimit libtool config variables with single quotes, so when
+-# we write them to config.status, we have to be sure to quote all
+-# embedded single quotes properly. In configure, this macro expands
+-# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+-#
+-# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+-m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+-[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+- [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+-
+-
+-# _LT_LIBTOOL_TAGS
+-# ----------------
+-# Output comment and list of tags supported by the script
+-m4_defun([_LT_LIBTOOL_TAGS],
+-[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+-available_tags="_LT_TAGS"dnl
+-])
+-
+-
+-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+-# -----------------------------------
+-# Extract the dictionary values for VARNAME (optionally with TAG) and
+-# expand to a commented shell variable setting:
+-#
+-# # Some comment about what VAR is for.
+-# visible_name=$lt_internal_name
+-m4_define([_LT_LIBTOOL_DECLARE],
+-[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+- [description])))[]dnl
+-m4_pushdef([_libtool_name],
+- m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+-m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+- [0], [_libtool_name=[$]$1],
+- [1], [_libtool_name=$lt_[]$1],
+- [2], [_libtool_name=$lt_[]$1],
+- [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+-m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+-])
+-
+-
+-# _LT_LIBTOOL_CONFIG_VARS
+-# -----------------------
+-# Produce commented declarations of non-tagged libtool config variables
+-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+-# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+-# section) are produced by _LT_LIBTOOL_TAG_VARS.
+-m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+-[m4_foreach([_lt_var],
+- m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+- [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+-
+-
+-# _LT_LIBTOOL_TAG_VARS(TAG)
+-# -------------------------
+-m4_define([_LT_LIBTOOL_TAG_VARS],
+-[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+- [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+-
+-
+-# _LT_TAGVAR(VARNAME, [TAGNAME])
+-# ------------------------------
+-m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+-
+-
+-# _LT_CONFIG_COMMANDS
+-# -------------------
+-# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+-# variables for single and double quote escaping we saved from calls
+-# to _LT_DECL, we can put quote escaped variables declarations
+-# into `config.status', and then the shell code to quote escape them in
+-# for loops in `config.status'. Finally, any additional code accumulated
+-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+-m4_defun([_LT_CONFIG_COMMANDS],
+-[AC_PROVIDE_IFELSE([LT_OUTPUT],
+- dnl If the libtool generation code has been placed in $CONFIG_LT,
+- dnl instead of duplicating it all over again into config.status,
+- dnl then we will have config.status run $CONFIG_LT later, so it
+- dnl needs to know what name is stored there:
+- [AC_CONFIG_COMMANDS([libtool],
+- [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+- dnl If the libtool generation code is destined for config.status,
+- dnl expand the accumulated commands and init code now:
+- [AC_CONFIG_COMMANDS([libtool],
+- [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+-])#_LT_CONFIG_COMMANDS
+-
+-
+-# Initialize.
+-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+-[
+-
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+-
+-sed_quote_subst='$sed_quote_subst'
+-double_quote_subst='$double_quote_subst'
+-delay_variable_subst='$delay_variable_subst'
+-_LT_CONFIG_STATUS_DECLARATIONS
+-LTCC='$LTCC'
+-LTCFLAGS='$LTCFLAGS'
+-compiler='$compiler_DEFAULT'
+-
+-# Quote evaled strings.
+-for var in lt_decl_all_varnames([[ \
+-]], lt_decl_quote_varnames); do
+- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+- *[[\\\\\\\`\\"\\\$]]*)
+- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+- ;;
+- *)
+- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+- ;;
+- esac
+-done
+-
+-# Double-quote double-evaled strings.
+-for var in lt_decl_all_varnames([[ \
+-]], lt_decl_dquote_varnames); do
+- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+- *[[\\\\\\\`\\"\\\$]]*)
+- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+- ;;
+- *)
+- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+- ;;
+- esac
+-done
+-
+-# Fix-up fallback echo if it was mangled by the above quoting rules.
+-case \$lt_ECHO in
+-*'\\\[$]0 --fallback-echo"')dnl "
+- lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+- ;;
+-esac
+-
+-_LT_OUTPUT_LIBTOOL_INIT
+-])
+-
+-
+-# LT_OUTPUT
+-# ---------
+-# This macro allows early generation of the libtool script (before
+-# AC_OUTPUT is called), incase it is used in configure for compilation
+-# tests.
+-AC_DEFUN([LT_OUTPUT],
+-[: ${CONFIG_LT=./config.lt}
+-AC_MSG_NOTICE([creating $CONFIG_LT])
+-cat >"$CONFIG_LT" <<_LTEOF
+-#! $SHELL
+-# Generated by $as_me.
+-# Run this file to recreate a libtool stub with the current configuration.
+-
+-lt_cl_silent=false
+-SHELL=\${CONFIG_SHELL-$SHELL}
+-_LTEOF
+-
+-cat >>"$CONFIG_LT" <<\_LTEOF
+-AS_SHELL_SANITIZE
+-_AS_PREPARE
+-
+-exec AS_MESSAGE_FD>&1
+-exec AS_MESSAGE_LOG_FD>>config.log
+-{
+- echo
+- AS_BOX([Running $as_me.])
+-} >&AS_MESSAGE_LOG_FD
+-
+-lt_cl_help="\
+-\`$as_me' creates a local libtool stub from the current configuration,
+-for use in further configure time tests before the real libtool is
+-generated.
+-
+-Usage: $[0] [[OPTIONS]]
+-
+- -h, --help print this help, then exit
+- -V, --version print version number, then exit
+- -q, --quiet do not print progress messages
+- -d, --debug don't remove temporary files
+-
+-Report bugs to <bug-libtool@gnu.org>."
+-
+-lt_cl_version="\
+-m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+-m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+-configured by $[0], generated by m4_PACKAGE_STRING.
+-
+-Copyright (C) 2008 Free Software Foundation, Inc.
+-This config.lt script is free software; the Free Software Foundation
+-gives unlimited permision to copy, distribute and modify it."
+-
+-while test $[#] != 0
+-do
+- case $[1] in
+- --version | --v* | -V )
+- echo "$lt_cl_version"; exit 0 ;;
+- --help | --h* | -h )
+- echo "$lt_cl_help"; exit 0 ;;
+- --debug | --d* | -d )
+- debug=: ;;
+- --quiet | --q* | --silent | --s* | -q )
+- lt_cl_silent=: ;;
+-
+- -*) AC_MSG_ERROR([unrecognized option: $[1]
+-Try \`$[0] --help' for more information.]) ;;
+-
+- *) AC_MSG_ERROR([unrecognized argument: $[1]
+-Try \`$[0] --help' for more information.]) ;;
+- esac
+- shift
+-done
+-
+-if $lt_cl_silent; then
+- exec AS_MESSAGE_FD>/dev/null
+-fi
+-_LTEOF
+-
+-cat >>"$CONFIG_LT" <<_LTEOF
+-_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+-_LTEOF
+-
+-cat >>"$CONFIG_LT" <<\_LTEOF
+-AC_MSG_NOTICE([creating $ofile])
+-_LT_OUTPUT_LIBTOOL_COMMANDS
+-AS_EXIT(0)
+-_LTEOF
+-chmod +x "$CONFIG_LT"
+-
+-# configure is writing to config.log, but config.lt does its own redirection,
+-# appending to config.log, which fails on DOS, as config.log is still kept
+-# open by configure. Here we exec the FD to /dev/null, effectively closing
+-# config.log, so it can be properly (re)opened and appended to by config.lt.
+-if test "$no_create" != yes; then
+- lt_cl_success=:
+- test "$silent" = yes &&
+- lt_config_lt_args="$lt_config_lt_args --quiet"
+- exec AS_MESSAGE_LOG_FD>/dev/null
+- $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+- exec AS_MESSAGE_LOG_FD>>config.log
+- $lt_cl_success || AS_EXIT(1)
+-fi
+-])# LT_OUTPUT
+-
+-
+-# _LT_CONFIG(TAG)
+-# ---------------
+-# If TAG is the built-in tag, create an initial libtool script with a
+-# default configuration from the untagged config vars. Otherwise add code
+-# to config.status for appending the configuration named by TAG from the
+-# matching tagged config vars.
+-m4_defun([_LT_CONFIG],
+-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-_LT_CONFIG_SAVE_COMMANDS([
+- m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+- m4_if(_LT_TAG, [C], [
+- # See if we are running on zsh, and set the options which allow our
+- # commands through without removal of \ escapes.
+- if test -n "${ZSH_VERSION+set}" ; then
+- setopt NO_GLOB_SUBST
+- fi
+-
+- cfgfile="${ofile}T"
+- trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+- $RM "$cfgfile"
+-
+- cat <<_LT_EOF >> "$cfgfile"
+-#! $SHELL
+-
+-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+-#
+-_LT_COPYING
+-_LT_LIBTOOL_TAGS
+-
+-# ### BEGIN LIBTOOL CONFIG
+-_LT_LIBTOOL_CONFIG_VARS
+-_LT_LIBTOOL_TAG_VARS
+-# ### END LIBTOOL CONFIG
+-
+-_LT_EOF
+-
+- case $host_os in
+- aix3*)
+- cat <<\_LT_EOF >> "$cfgfile"
+-# AIX sometimes has problems with the GCC collect2 program. For some
+-# reason, if we set the COLLECT_NAMES environment variable, the problems
+-# vanish in a puff of smoke.
+-if test "X${COLLECT_NAMES+set}" != Xset; then
+- COLLECT_NAMES=
+- export COLLECT_NAMES
+-fi
+-_LT_EOF
+- ;;
+- esac
+-
+- _LT_PROG_LTMAIN
+-
+- # We use sed instead of cat because bash on DJGPP gets confused if
+- # if finds mixed CR/LF and LF-only lines. Since sed operates in
+- # text mode, it properly converts lines to CR/LF. This bash problem
+- # is reportedly fixed, but why not run on old versions too?
+- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- _LT_PROG_XSI_SHELLFNS
+-
+- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- mv -f "$cfgfile" "$ofile" ||
+- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+- chmod +x "$ofile"
+-],
+-[cat <<_LT_EOF >> "$ofile"
+-
+-dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+-dnl in a comment (ie after a #).
+-# ### BEGIN LIBTOOL TAG CONFIG: $1
+-_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+-# ### END LIBTOOL TAG CONFIG: $1
+-_LT_EOF
+-])dnl /m4_if
+-],
+-[m4_if([$1], [], [
+- PACKAGE='$PACKAGE'
+- VERSION='$VERSION'
+- TIMESTAMP='$TIMESTAMP'
+- RM='$RM'
+- ofile='$ofile'], [])
+-])dnl /_LT_CONFIG_SAVE_COMMANDS
+-])# _LT_CONFIG
+-
+-
+-# LT_SUPPORTED_TAG(TAG)
+-# ---------------------
+-# Trace this macro to discover what tags are supported by the libtool
+-# --tag option, using:
+-# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+-AC_DEFUN([LT_SUPPORTED_TAG], [])
+-
+-
+-# C support is built-in for now
+-m4_define([_LT_LANG_C_enabled], [])
+-m4_define([_LT_TAGS], [])
+-
+-
+-# LT_LANG(LANG)
+-# -------------
+-# Enable libtool support for the given language if not already enabled.
+-AC_DEFUN([LT_LANG],
+-[AC_BEFORE([$0], [LT_OUTPUT])dnl
+-m4_case([$1],
+- [C], [_LT_LANG(C)],
+- [C++], [_LT_LANG(CXX)],
+- [Java], [_LT_LANG(GCJ)],
+- [Fortran 77], [_LT_LANG(F77)],
+- [Fortran], [_LT_LANG(FC)],
+- [Windows Resource], [_LT_LANG(RC)],
+- [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+- [_LT_LANG($1)],
+- [m4_fatal([$0: unsupported language: "$1"])])])dnl
+-])# LT_LANG
+-
+-
+-# _LT_LANG(LANGNAME)
+-# ------------------
+-m4_defun([_LT_LANG],
+-[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+- [LT_SUPPORTED_TAG([$1])dnl
+- m4_append([_LT_TAGS], [$1 ])dnl
+- m4_define([_LT_LANG_]$1[_enabled], [])dnl
+- _LT_LANG_$1_CONFIG($1)])dnl
+-])# _LT_LANG
+-
+-
+-# _LT_LANG_DEFAULT_CONFIG
+-# -----------------------
+-m4_defun([_LT_LANG_DEFAULT_CONFIG],
+-[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+- [LT_LANG(CXX)],
+- [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+-
+-AC_PROVIDE_IFELSE([AC_PROG_F77],
+- [LT_LANG(F77)],
+- [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+-
+-AC_PROVIDE_IFELSE([AC_PROG_FC],
+- [LT_LANG(FC)],
+- [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+-
+-dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+-dnl pulling things in needlessly.
+-AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+- [LT_LANG(GCJ)],
+- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+- [LT_LANG(GCJ)],
+- [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+- [LT_LANG(GCJ)],
+- [m4_ifdef([AC_PROG_GCJ],
+- [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+- m4_ifdef([A][M_PROG_GCJ],
+- [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+- m4_ifdef([LT_PROG_GCJ],
+- [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+-
+-AC_PROVIDE_IFELSE([LT_PROG_RC],
+- [LT_LANG(RC)],
+- [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+-])# _LT_LANG_DEFAULT_CONFIG
+-
+-# Obsolete macros:
+-AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+-AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+-AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+-AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+-dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+-dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+-dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+-
+-
+-# _LT_TAG_COMPILER
+-# ----------------
+-m4_defun([_LT_TAG_COMPILER],
+-[AC_REQUIRE([AC_PROG_CC])dnl
+-
+-_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+-_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+-_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+-_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+-
+-# If no C compiler was specified, use CC.
+-LTCC=${LTCC-"$CC"}
+-
+-# If no C compiler flags were specified, use CFLAGS.
+-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+-
+-# Allow CC to be a program name with arguments.
+-compiler=$CC
+-])# _LT_TAG_COMPILER
+-
+-
+-# _LT_COMPILER_BOILERPLATE
+-# ------------------------
+-# Check for compiler boilerplate output or warnings with
+-# the simple compiler test code.
+-m4_defun([_LT_COMPILER_BOILERPLATE],
+-[m4_require([_LT_DECL_SED])dnl
+-ac_outfile=conftest.$ac_objext
+-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+-_lt_compiler_boilerplate=`cat conftest.err`
+-$RM conftest*
+-])# _LT_COMPILER_BOILERPLATE
+-
+-
+-# _LT_LINKER_BOILERPLATE
+-# ----------------------
+-# Check for linker boilerplate output or warnings with
+-# the simple link test code.
+-m4_defun([_LT_LINKER_BOILERPLATE],
+-[m4_require([_LT_DECL_SED])dnl
+-ac_outfile=conftest.$ac_objext
+-echo "$lt_simple_link_test_code" >conftest.$ac_ext
+-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+-_lt_linker_boilerplate=`cat conftest.err`
+-$RM -r conftest*
+-])# _LT_LINKER_BOILERPLATE
+-
+-# _LT_REQUIRED_DARWIN_CHECKS
+-# -------------------------
+-m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+- case $host_os in
+- rhapsody* | darwin*)
+- AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+- AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+- AC_CHECK_TOOL([LIPO], [lipo], [:])
+- AC_CHECK_TOOL([OTOOL], [otool], [:])
+- AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+- _LT_DECL([], [DSYMUTIL], [1],
+- [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+- _LT_DECL([], [NMEDIT], [1],
+- [Tool to change global to local symbols on Mac OS X])
+- _LT_DECL([], [LIPO], [1],
+- [Tool to manipulate fat objects and archives on Mac OS X])
+- _LT_DECL([], [OTOOL], [1],
+- [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+- _LT_DECL([], [OTOOL64], [1],
+- [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+-
+- AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+- [lt_cv_apple_cc_single_mod=no
+- if test -z "${LT_MULTI_MODULE}"; then
+- # By default we will add the -single_module flag. You can override
+- # by either setting the environment variable LT_MULTI_MODULE
+- # non-empty at configure time, or by adding -multi_module to the
+- # link flags.
+- rm -rf libconftest.dylib*
+- echo "int foo(void){return 1;}" > conftest.c
+- echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+--dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+- -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+- _lt_result=$?
+- if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+- lt_cv_apple_cc_single_mod=yes
+- else
+- cat conftest.err >&AS_MESSAGE_LOG_FD
+- fi
+- rm -rf libconftest.dylib*
+- rm -f conftest.*
+- fi])
+- AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+- [lt_cv_ld_exported_symbols_list],
+- [lt_cv_ld_exported_symbols_list=no
+- save_LDFLAGS=$LDFLAGS
+- echo "_main" > conftest.sym
+- LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+- [lt_cv_ld_exported_symbols_list=yes],
+- [lt_cv_ld_exported_symbols_list=no])
+- LDFLAGS="$save_LDFLAGS"
+- ])
+- case $host_os in
+- rhapsody* | darwin1.[[012]])
+- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+- darwin1.*)
+- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+- darwin*) # darwin 5.x on
+- # if running on 10.5 or later, the deployment target defaults
+- # to the OS version, if on x86, and 10.4, the deployment
+- # target defaults to 10.4. Don't you love it?
+- case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+- 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+- 10.[[012]]*)
+- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+- 10.*)
+- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+- esac
+- ;;
+- esac
+- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+- _lt_dar_single_mod='$single_module'
+- fi
+- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+- else
+- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- fi
+- if test "$DSYMUTIL" != ":"; then
+- _lt_dsymutil='~$DSYMUTIL $lib || :'
+- else
+- _lt_dsymutil=
+- fi
+- ;;
+- esac
+-])
+-
+-
+-# _LT_DARWIN_LINKER_FEATURES
+-# --------------------------
+-# Checks for linker and compiler features on darwin
+-m4_defun([_LT_DARWIN_LINKER_FEATURES],
+-[
+- m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_automatic, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+- case $cc_basename in
+- ifort*) _lt_dar_can_shared=yes ;;
+- *) _lt_dar_can_shared=$GCC ;;
+- esac
+- if test "$_lt_dar_can_shared" = "yes"; then
+- output_verbose_link_cmd=echo
+- _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+- _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+- _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+- m4_if([$1], [CXX],
+-[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+- _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+- fi
+-],[])
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+-])
+-
+-# _LT_SYS_MODULE_PATH_AIX
+-# -----------------------
+-# Links a minimal program and checks the executable
+-# for the system default hardcoded library path. In most cases,
+-# this is /usr/lib:/lib, but when the MPI compilers are used
+-# the location of the communication and MPI libs are included too.
+-# If we don't find anything, use the default library path according
+-# to the aix ld manual.
+-m4_defun([_LT_SYS_MODULE_PATH_AIX],
+-[m4_require([_LT_DECL_SED])dnl
+-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi],[])
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+-])# _LT_SYS_MODULE_PATH_AIX
+-
+-
+-# _LT_SHELL_INIT(ARG)
+-# -------------------
+-m4_define([_LT_SHELL_INIT],
+-[ifdef([AC_DIVERSION_NOTICE],
+- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+- [AC_DIVERT_PUSH(NOTICE)])
+-$1
+-AC_DIVERT_POP
+-])# _LT_SHELL_INIT
+-
+-
+-# _LT_PROG_ECHO_BACKSLASH
+-# -----------------------
+-# Add some code to the start of the generated configure script which
+-# will find an echo command which doesn't interpret backslashes.
+-m4_defun([_LT_PROG_ECHO_BACKSLASH],
+-[_LT_SHELL_INIT([
+-# Check that we are running under the correct shell.
+-SHELL=${CONFIG_SHELL-/bin/sh}
+-
+-case X$lt_ECHO in
+-X*--fallback-echo)
+- # Remove one level of quotation (which was required for Make).
+- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+- ;;
+-esac
+-
+-ECHO=${lt_ECHO-echo}
+-if test "X[$]1" = X--no-reexec; then
+- # Discard the --no-reexec flag, and continue.
+- shift
+-elif test "X[$]1" = X--fallback-echo; then
+- # Avoid inline document here, it may be left over
+- :
+-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+- # Yippee, $ECHO works!
+- :
+-else
+- # Restart under the correct shell.
+- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+-fi
+-
+-if test "X[$]1" = X--fallback-echo; then
+- # used as fallback echo
+- shift
+- cat <<_LT_EOF
+-[$]*
+-_LT_EOF
+- exit 0
+-fi
+-
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+-
+-if test -z "$lt_ECHO"; then
+- if test "X${echo_test_string+set}" != Xset; then
+- # find a string as large as possible, as long as the shell can cope with it
+- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+- if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+- then
+- break
+- fi
+- done
+- fi
+-
+- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- :
+- else
+- # The Solaris, AIX, and Digital Unix default echo programs unquote
+- # backslashes. This makes it impossible to quote backslashes using
+- # echo "$something" | sed 's/\\/\\\\/g'
+- #
+- # So, first we look for a working echo in the user's PATH.
+-
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for dir in $PATH /usr/ucb; do
+- IFS="$lt_save_ifs"
+- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- ECHO="$dir/echo"
+- break
+- fi
+- done
+- IFS="$lt_save_ifs"
+-
+- if test "X$ECHO" = Xecho; then
+- # We didn't find a better echo, so look for alternatives.
+- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # This shell has a builtin print -r that does the trick.
+- ECHO='print -r'
+- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+- test "X$CONFIG_SHELL" != X/bin/ksh; then
+- # If we have ksh, try running configure again with it.
+- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+- export ORIGINAL_CONFIG_SHELL
+- CONFIG_SHELL=/bin/ksh
+- export CONFIG_SHELL
+- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+- else
+- # Try using printf.
+- ECHO='printf %s\n'
+- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # Cool, printf works
+- :
+- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+- export CONFIG_SHELL
+- SHELL="$CONFIG_SHELL"
+- export SHELL
+- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+- else
+- # maybe with a smaller string...
+- prev=:
+-
+- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+- then
+- break
+- fi
+- prev="$cmd"
+- done
+-
+- if test "$prev" != 'sed 50q "[$]0"'; then
+- echo_test_string=`eval $prev`
+- export echo_test_string
+- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+- else
+- # Oops. We lost completely, so just stick with echo.
+- ECHO=echo
+- fi
+- fi
+- fi
+- fi
+- fi
+-fi
+-
+-# Copy echo and quote the copy suitably for passing to libtool from
+-# the Makefile, instead of quoting the original, which is used later.
+-lt_ECHO=$ECHO
+-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+- lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+-fi
+-
+-AC_SUBST(lt_ECHO)
+-])
+-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+-_LT_DECL([], [ECHO], [1],
+- [An echo program that does not interpret backslashes])
+-])# _LT_PROG_ECHO_BACKSLASH
+-
+-
+-# _LT_ENABLE_LOCK
+-# ---------------
+-m4_defun([_LT_ENABLE_LOCK],
+-[AC_ARG_ENABLE([libtool-lock],
+- [AS_HELP_STRING([--disable-libtool-lock],
+- [avoid locking (might break parallel builds)])])
+-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+-
+-# Some flags need to be propagated to the compiler or linker for good
+-# libtool support.
+-case $host in
+-ia64-*-hpux*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.$ac_objext` in
+- *ELF-32*)
+- HPUX_IA64_MODE="32"
+- ;;
+- *ELF-64*)
+- HPUX_IA64_MODE="64"
+- ;;
+- esac
+- fi
+- rm -rf conftest*
+- ;;
+-*-*-irix6*)
+- # Find out which ABI we are using.
+- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- if test "$lt_cv_prog_gnu_ld" = yes; then
+- case `/usr/bin/file conftest.$ac_objext` in
+- *32-bit*)
+- LD="${LD-ld} -melf32bsmip"
+- ;;
+- *N32*)
+- LD="${LD-ld} -melf32bmipn32"
+- ;;
+- *64-bit*)
+- LD="${LD-ld} -melf64bmip"
+- ;;
+- esac
+- else
+- case `/usr/bin/file conftest.$ac_objext` in
+- *32-bit*)
+- LD="${LD-ld} -32"
+- ;;
+- *N32*)
+- LD="${LD-ld} -n32"
+- ;;
+- *64-bit*)
+- LD="${LD-ld} -64"
+- ;;
+- esac
+- fi
+- fi
+- rm -rf conftest*
+- ;;
+-
+-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.o` in
+- *32-bit*)
+- case $host in
+- x86_64-*kfreebsd*-gnu)
+- LD="${LD-ld} -m elf_i386_fbsd"
+- ;;
+- x86_64-*linux*)
+- LD="${LD-ld} -m elf_i386"
+- ;;
+- ppc64-*linux*|powerpc64-*linux*)
+- LD="${LD-ld} -m elf32ppclinux"
+- ;;
+- s390x-*linux*)
+- LD="${LD-ld} -m elf_s390"
+- ;;
+- sparc64-*linux*)
+- LD="${LD-ld} -m elf32_sparc"
+- ;;
+- esac
+- ;;
+- *64-bit*)
+- case $host in
+- x86_64-*kfreebsd*-gnu)
+- LD="${LD-ld} -m elf_x86_64_fbsd"
+- ;;
+- x86_64-*linux*)
+- LD="${LD-ld} -m elf_x86_64"
+- ;;
+- ppc*-*linux*|powerpc*-*linux*)
+- LD="${LD-ld} -m elf64ppc"
+- ;;
+- s390*-*linux*|s390*-*tpf*)
+- LD="${LD-ld} -m elf64_s390"
+- ;;
+- sparc*-*linux*)
+- LD="${LD-ld} -m elf64_sparc"
+- ;;
+- esac
+- ;;
+- esac
+- fi
+- rm -rf conftest*
+- ;;
+-
+-*-*-sco3.2v5*)
+- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+- SAVE_CFLAGS="$CFLAGS"
+- CFLAGS="$CFLAGS -belf"
+- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+- [AC_LANG_PUSH(C)
+- AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+- AC_LANG_POP])
+- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+- CFLAGS="$SAVE_CFLAGS"
+- fi
+- ;;
+-sparc*-*solaris*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.o` in
+- *64-bit*)
+- case $lt_cv_prog_gnu_ld in
+- yes*) LD="${LD-ld} -m elf64_sparc" ;;
+- *)
+- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+- LD="${LD-ld} -64"
+- fi
+- ;;
+- esac
+- ;;
+- esac
+- fi
+- rm -rf conftest*
+- ;;
+-esac
+-
+-need_locks="$enable_libtool_lock"
+-])# _LT_ENABLE_LOCK
+-
+-
+-# _LT_CMD_OLD_ARCHIVE
+-# -------------------
+-m4_defun([_LT_CMD_OLD_ARCHIVE],
+-[AC_CHECK_TOOL(AR, ar, false)
+-test -z "$AR" && AR=ar
+-test -z "$AR_FLAGS" && AR_FLAGS=cru
+-_LT_DECL([], [AR], [1], [The archiver])
+-_LT_DECL([], [AR_FLAGS], [1])
+-
+-AC_CHECK_TOOL(STRIP, strip, :)
+-test -z "$STRIP" && STRIP=:
+-_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+-
+-AC_CHECK_TOOL(RANLIB, ranlib, :)
+-test -z "$RANLIB" && RANLIB=:
+-_LT_DECL([], [RANLIB], [1],
+- [Commands used to install an old-style archive])
+-
+-# Determine commands to create old-style static archives.
+-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+-old_postinstall_cmds='chmod 644 $oldlib'
+-old_postuninstall_cmds=
+-
+-if test -n "$RANLIB"; then
+- case $host_os in
+- openbsd*)
+- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+- ;;
+- *)
+- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+- ;;
+- esac
+- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+-fi
+-_LT_DECL([], [old_postinstall_cmds], [2])
+-_LT_DECL([], [old_postuninstall_cmds], [2])
+-_LT_TAGDECL([], [old_archive_cmds], [2],
+- [Commands used to build an old-style archive])
+-])# _LT_CMD_OLD_ARCHIVE
+-
+-
+-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+-# ----------------------------------------------------------------
+-# Check whether the given compiler option works
+-AC_DEFUN([_LT_COMPILER_OPTION],
+-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_DECL_SED])dnl
+-AC_CACHE_CHECK([$1], [$2],
+- [$2=no
+- m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+- lt_compiler_flag="$3"
+- # Insert the option either (1) after the last *FLAGS variable, or
+- # (2) before a word containing "conftest.", or (3) at the end.
+- # Note that $ac_compile itself does not contain backslashes and begins
+- # with a dollar sign (not a hyphen), so the echo should work correctly.
+- # The option is referenced via a variable to avoid confusing sed.
+- lt_compile=`echo "$ac_compile" | $SED \
+- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+- -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+- (eval "$lt_compile" 2>conftest.err)
+- ac_status=$?
+- cat conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+- if (exit $ac_status) && test -s "$ac_outfile"; then
+- # The compiler can only warn and ignore the option if not recognized
+- # So say no if there are warnings other than the usual output.
+- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+- $2=yes
+- fi
+- fi
+- $RM conftest*
+-])
+-
+-if test x"[$]$2" = xyes; then
+- m4_if([$5], , :, [$5])
+-else
+- m4_if([$6], , :, [$6])
+-fi
+-])# _LT_COMPILER_OPTION
+-
+-# Old name:
+-AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+-
+-
+-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+-# [ACTION-SUCCESS], [ACTION-FAILURE])
+-# ----------------------------------------------------
+-# Check whether the given linker option works
+-AC_DEFUN([_LT_LINKER_OPTION],
+-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_DECL_SED])dnl
+-AC_CACHE_CHECK([$1], [$2],
+- [$2=no
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS $3"
+- echo "$lt_simple_link_test_code" > conftest.$ac_ext
+- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+- # The linker can only warn and ignore the option if not recognized
+- # So say no if there are warnings
+- if test -s conftest.err; then
+- # Append any errors to the config.log.
+- cat conftest.err 1>&AS_MESSAGE_LOG_FD
+- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+- if diff conftest.exp conftest.er2 >/dev/null; then
+- $2=yes
+- fi
+- else
+- $2=yes
+- fi
+- fi
+- $RM -r conftest*
+- LDFLAGS="$save_LDFLAGS"
+-])
+-
+-if test x"[$]$2" = xyes; then
+- m4_if([$4], , :, [$4])
+-else
+- m4_if([$5], , :, [$5])
+-fi
+-])# _LT_LINKER_OPTION
+-
+-# Old name:
+-AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+-
+-
+-# LT_CMD_MAX_LEN
+-#---------------
+-AC_DEFUN([LT_CMD_MAX_LEN],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-# find the maximum length of command line arguments
+-AC_MSG_CHECKING([the maximum length of command line arguments])
+-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+- i=0
+- teststring="ABCD"
+-
+- case $build_os in
+- msdosdjgpp*)
+- # On DJGPP, this test can blow up pretty badly due to problems in libc
+- # (any single argument exceeding 2000 bytes causes a buffer overrun
+- # during glob expansion). Even if it were fixed, the result of this
+- # check would be larger than it should be.
+- lt_cv_sys_max_cmd_len=12288; # 12K is about right
+- ;;
+-
+- gnu*)
+- # Under GNU Hurd, this test is not required because there is
+- # no limit to the length of command line arguments.
+- # Libtool will interpret -1 as no limit whatsoever
+- lt_cv_sys_max_cmd_len=-1;
+- ;;
+-
+- cygwin* | mingw* | cegcc*)
+- # On Win9x/ME, this test blows up -- it succeeds, but takes
+- # about 5 minutes as the teststring grows exponentially.
+- # Worse, since 9x/ME are not pre-emptively multitasking,
+- # you end up with a "frozen" computer, even though with patience
+- # the test eventually succeeds (with a max line length of 256k).
+- # Instead, let's just punt: use the minimum linelength reported by
+- # all of the supported platforms: 8192 (on NT/2K/XP).
+- lt_cv_sys_max_cmd_len=8192;
+- ;;
+-
+- amigaos*)
+- # On AmigaOS with pdksh, this test takes hours, literally.
+- # So we just punt and use a minimum line length of 8192.
+- lt_cv_sys_max_cmd_len=8192;
+- ;;
+-
+- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+- # This has been around since 386BSD, at least. Likely further.
+- if test -x /sbin/sysctl; then
+- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+- elif test -x /usr/sbin/sysctl; then
+- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+- else
+- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+- fi
+- # And add a safety zone
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+- ;;
+-
+- interix*)
+- # We know the value 262144 and hardcode it with a safety zone (like BSD)
+- lt_cv_sys_max_cmd_len=196608
+- ;;
+-
+- osf*)
+- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+- # nice to cause kernel panics so lets avoid the loop below.
+- # First set a reasonable default.
+- lt_cv_sys_max_cmd_len=16384
+- #
+- if test -x /sbin/sysconfig; then
+- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+- *1*) lt_cv_sys_max_cmd_len=-1 ;;
+- esac
+- fi
+- ;;
+- sco3.2v5*)
+- lt_cv_sys_max_cmd_len=102400
+- ;;
+- sysv5* | sco5v6* | sysv4.2uw2*)
+- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+- if test -n "$kargmax"; then
+- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+- else
+- lt_cv_sys_max_cmd_len=32768
+- fi
+- ;;
+- *)
+- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+- if test -n "$lt_cv_sys_max_cmd_len"; then
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+- else
+- # Make teststring a little bigger before we do anything with it.
+- # a 1K string should be a reasonable start.
+- for i in 1 2 3 4 5 6 7 8 ; do
+- teststring=$teststring$teststring
+- done
+- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+- # If test is not a shell built-in, we'll probably end up computing a
+- # maximum length that is only half of the actual maximum length, but
+- # we can't tell.
+- while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+- = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+- test $i != 17 # 1/2 MB should be enough
+- do
+- i=`expr $i + 1`
+- teststring=$teststring$teststring
+- done
+- # Only check the string length outside the loop.
+- lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+- teststring=
+- # Add a significant safety factor because C++ compilers can tack on
+- # massive amounts of additional arguments before passing them to the
+- # linker. It appears as though 1/2 is a usable value.
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+- fi
+- ;;
+- esac
+-])
+-if test -n $lt_cv_sys_max_cmd_len ; then
+- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+-else
+- AC_MSG_RESULT(none)
+-fi
+-max_cmd_len=$lt_cv_sys_max_cmd_len
+-_LT_DECL([], [max_cmd_len], [0],
+- [What is the maximum length of a command?])
+-])# LT_CMD_MAX_LEN
+-
+-# Old name:
+-AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+-
+-
+-# _LT_HEADER_DLFCN
+-# ----------------
+-m4_defun([_LT_HEADER_DLFCN],
+-[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+-])# _LT_HEADER_DLFCN
+-
+-
+-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+-# ----------------------------------------------------------------
+-m4_defun([_LT_TRY_DLOPEN_SELF],
+-[m4_require([_LT_HEADER_DLFCN])dnl
+-if test "$cross_compiling" = yes; then :
+- [$4]
+-else
+- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+- lt_status=$lt_dlunknown
+- cat > conftest.$ac_ext <<_LT_EOF
+-[#line __oline__ "configure"
+-#include "confdefs.h"
+-
+-#if HAVE_DLFCN_H
+-#include <dlfcn.h>
+-#endif
+-
+-#include <stdio.h>
+-
+-#ifdef RTLD_GLOBAL
+-# define LT_DLGLOBAL RTLD_GLOBAL
+-#else
+-# ifdef DL_GLOBAL
+-# define LT_DLGLOBAL DL_GLOBAL
+-# else
+-# define LT_DLGLOBAL 0
+-# endif
+-#endif
+-
+-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+- find out it does not work in some platform. */
+-#ifndef LT_DLLAZY_OR_NOW
+-# ifdef RTLD_LAZY
+-# define LT_DLLAZY_OR_NOW RTLD_LAZY
+-# else
+-# ifdef DL_LAZY
+-# define LT_DLLAZY_OR_NOW DL_LAZY
+-# else
+-# ifdef RTLD_NOW
+-# define LT_DLLAZY_OR_NOW RTLD_NOW
+-# else
+-# ifdef DL_NOW
+-# define LT_DLLAZY_OR_NOW DL_NOW
+-# else
+-# define LT_DLLAZY_OR_NOW 0
+-# endif
+-# endif
+-# endif
+-# endif
+-#endif
+-
+-void fnord() { int i=42;}
+-int main ()
+-{
+- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+- int status = $lt_dlunknown;
+-
+- if (self)
+- {
+- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+- /* dlclose (self); */
+- }
+- else
+- puts (dlerror ());
+-
+- return status;
+-}]
+-_LT_EOF
+- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+- lt_status=$?
+- case x$lt_status in
+- x$lt_dlno_uscore) $1 ;;
+- x$lt_dlneed_uscore) $2 ;;
+- x$lt_dlunknown|x*) $3 ;;
+- esac
+- else :
+- # compilation failed
+- $3
+- fi
+-fi
+-rm -fr conftest*
+-])# _LT_TRY_DLOPEN_SELF
+-
+-
+-# LT_SYS_DLOPEN_SELF
+-# ------------------
+-AC_DEFUN([LT_SYS_DLOPEN_SELF],
+-[m4_require([_LT_HEADER_DLFCN])dnl
+-if test "x$enable_dlopen" != xyes; then
+- enable_dlopen=unknown
+- enable_dlopen_self=unknown
+- enable_dlopen_self_static=unknown
+-else
+- lt_cv_dlopen=no
+- lt_cv_dlopen_libs=
+-
+- case $host_os in
+- beos*)
+- lt_cv_dlopen="load_add_on"
+- lt_cv_dlopen_libs=
+- lt_cv_dlopen_self=yes
+- ;;
+-
+- mingw* | pw32* | cegcc*)
+- lt_cv_dlopen="LoadLibrary"
+- lt_cv_dlopen_libs=
+- ;;
+-
+- cygwin*)
+- lt_cv_dlopen="dlopen"
+- lt_cv_dlopen_libs=
+- ;;
+-
+- darwin*)
+- # if libdl is installed we need to link against it
+- AC_CHECK_LIB([dl], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+- lt_cv_dlopen="dyld"
+- lt_cv_dlopen_libs=
+- lt_cv_dlopen_self=yes
+- ])
+- ;;
+-
+- *)
+- AC_CHECK_FUNC([shl_load],
+- [lt_cv_dlopen="shl_load"],
+- [AC_CHECK_LIB([dld], [shl_load],
+- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+- [AC_CHECK_FUNC([dlopen],
+- [lt_cv_dlopen="dlopen"],
+- [AC_CHECK_LIB([dl], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+- [AC_CHECK_LIB([svld], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+- [AC_CHECK_LIB([dld], [dld_link],
+- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+- ])
+- ])
+- ])
+- ])
+- ])
+- ;;
+- esac
+-
+- if test "x$lt_cv_dlopen" != xno; then
+- enable_dlopen=yes
+- else
+- enable_dlopen=no
+- fi
+-
+- case $lt_cv_dlopen in
+- dlopen)
+- save_CPPFLAGS="$CPPFLAGS"
+- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+-
+- save_LDFLAGS="$LDFLAGS"
+- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+-
+- save_LIBS="$LIBS"
+- LIBS="$lt_cv_dlopen_libs $LIBS"
+-
+- AC_CACHE_CHECK([whether a program can dlopen itself],
+- lt_cv_dlopen_self, [dnl
+- _LT_TRY_DLOPEN_SELF(
+- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+- ])
+-
+- if test "x$lt_cv_dlopen_self" = xyes; then
+- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+- lt_cv_dlopen_self_static, [dnl
+- _LT_TRY_DLOPEN_SELF(
+- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+- ])
+- fi
+-
+- CPPFLAGS="$save_CPPFLAGS"
+- LDFLAGS="$save_LDFLAGS"
+- LIBS="$save_LIBS"
+- ;;
+- esac
+-
+- case $lt_cv_dlopen_self in
+- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+- *) enable_dlopen_self=unknown ;;
+- esac
+-
+- case $lt_cv_dlopen_self_static in
+- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+- *) enable_dlopen_self_static=unknown ;;
+- esac
+-fi
+-_LT_DECL([dlopen_support], [enable_dlopen], [0],
+- [Whether dlopen is supported])
+-_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+- [Whether dlopen of programs is supported])
+-_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+- [Whether dlopen of statically linked programs is supported])
+-])# LT_SYS_DLOPEN_SELF
+-
+-# Old name:
+-AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+-
+-
+-# _LT_COMPILER_C_O([TAGNAME])
+-# ---------------------------
+-# Check to see if options -c and -o are simultaneously supported by compiler.
+-# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+-m4_defun([_LT_COMPILER_C_O],
+-[m4_require([_LT_DECL_SED])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_TAG_COMPILER])dnl
+-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+- [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+- [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+- $RM -r conftest 2>/dev/null
+- mkdir conftest
+- cd conftest
+- mkdir out
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+-
+- lt_compiler_flag="-o out/conftest2.$ac_objext"
+- # Insert the option either (1) after the last *FLAGS variable, or
+- # (2) before a word containing "conftest.", or (3) at the end.
+- # Note that $ac_compile itself does not contain backslashes and begins
+- # with a dollar sign (not a hyphen), so the echo should work correctly.
+- lt_compile=`echo "$ac_compile" | $SED \
+- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+- -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+- (eval "$lt_compile" 2>out/conftest.err)
+- ac_status=$?
+- cat out/conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+- if (exit $ac_status) && test -s out/conftest2.$ac_objext
+- then
+- # The compiler can only warn and ignore the option if not recognized
+- # So say no if there are warnings
+- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+- _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+- fi
+- fi
+- chmod u+w . 2>&AS_MESSAGE_LOG_FD
+- $RM conftest*
+- # SGI C++ compiler will create directory out/ii_files/ for
+- # template instantiation
+- test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+- $RM out/* && rmdir out
+- cd ..
+- $RM -r conftest
+- $RM conftest*
+-])
+-_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+- [Does compiler simultaneously support -c and -o options?])
+-])# _LT_COMPILER_C_O
+-
+-
+-# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+-# ----------------------------------
+-# Check to see if we can do hard links to lock some files if needed
+-m4_defun([_LT_COMPILER_FILE_LOCKS],
+-[m4_require([_LT_ENABLE_LOCK])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-_LT_COMPILER_C_O([$1])
+-
+-hard_links="nottested"
+-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+- # do not overwrite the value of need_locks provided by the user
+- AC_MSG_CHECKING([if we can lock with hard links])
+- hard_links=yes
+- $RM conftest*
+- ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- touch conftest.a
+- ln conftest.a conftest.b 2>&5 || hard_links=no
+- ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- AC_MSG_RESULT([$hard_links])
+- if test "$hard_links" = no; then
+- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+- need_locks=warn
+- fi
+-else
+- need_locks=no
+-fi
+-_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+-])# _LT_COMPILER_FILE_LOCKS
+-
+-
+-# _LT_CHECK_OBJDIR
+-# ----------------
+-m4_defun([_LT_CHECK_OBJDIR],
+-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+-[rm -f .libs 2>/dev/null
+-mkdir .libs 2>/dev/null
+-if test -d .libs; then
+- lt_cv_objdir=.libs
+-else
+- # MS-DOS does not allow filenames that begin with a dot.
+- lt_cv_objdir=_libs
+-fi
+-rmdir .libs 2>/dev/null])
+-objdir=$lt_cv_objdir
+-_LT_DECL([], [objdir], [0],
+- [The name of the directory that contains temporary libtool files])dnl
+-m4_pattern_allow([LT_OBJDIR])dnl
+-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+- [Define to the sub-directory in which libtool stores uninstalled libraries.])
+-])# _LT_CHECK_OBJDIR
+-
+-
+-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+-# --------------------------------------
+-# Check hardcoding attributes.
+-m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+-[AC_MSG_CHECKING([how to hardcode library paths into programs])
+-_LT_TAGVAR(hardcode_action, $1)=
+-if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+- test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+- test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+-
+- # We can hardcode non-existent directories.
+- if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+- # If the only mechanism to avoid hardcoding is shlibpath_var, we
+- # have to relink, otherwise we might link with an installed library
+- # when we should be linking with a yet-to-be-installed one
+- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+- test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+- # Linking always hardcodes the temporary library directory.
+- _LT_TAGVAR(hardcode_action, $1)=relink
+- else
+- # We can link without hardcoding, and we can hardcode nonexisting dirs.
+- _LT_TAGVAR(hardcode_action, $1)=immediate
+- fi
+-else
+- # We cannot hardcode anything, or else we can only hardcode existing
+- # directories.
+- _LT_TAGVAR(hardcode_action, $1)=unsupported
+-fi
+-AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+-
+-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+- test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+- # Fast installation is not supported
+- enable_fast_install=no
+-elif test "$shlibpath_overrides_runpath" = yes ||
+- test "$enable_shared" = no; then
+- # Fast installation is not necessary
+- enable_fast_install=needless
+-fi
+-_LT_TAGDECL([], [hardcode_action], [0],
+- [How to hardcode a shared library path into an executable])
+-])# _LT_LINKER_HARDCODE_LIBPATH
+-
+-
+-# _LT_CMD_STRIPLIB
+-# ----------------
+-m4_defun([_LT_CMD_STRIPLIB],
+-[m4_require([_LT_DECL_EGREP])
+-striplib=
+-old_striplib=
+-AC_MSG_CHECKING([whether stripping libraries is possible])
+-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+- AC_MSG_RESULT([yes])
+-else
+-# FIXME - insert some real tests, host_os isn't really good enough
+- case $host_os in
+- darwin*)
+- if test -n "$STRIP" ; then
+- striplib="$STRIP -x"
+- old_striplib="$STRIP -S"
+- AC_MSG_RESULT([yes])
+- else
+- AC_MSG_RESULT([no])
+- fi
+- ;;
+- *)
+- AC_MSG_RESULT([no])
+- ;;
+- esac
+-fi
+-_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+-_LT_DECL([], [striplib], [1])
+-])# _LT_CMD_STRIPLIB
+-
+-
+-# _LT_SYS_DYNAMIC_LINKER([TAG])
+-# -----------------------------
+-# PORTME Fill in your ld.so characteristics
+-m4_defun([_LT_SYS_DYNAMIC_LINKER],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-m4_require([_LT_DECL_EGREP])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_DECL_OBJDUMP])dnl
+-m4_require([_LT_DECL_SED])dnl
+-AC_MSG_CHECKING([dynamic linker characteristics])
+-m4_if([$1],
+- [], [
+-if test "$GCC" = yes; then
+- case $host_os in
+- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+- *) lt_awk_arg="/^libraries:/" ;;
+- esac
+- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+- # if the path contains ";" then we assume it to be the separator
+- # otherwise default to the standard path separator (i.e. ":") - it is
+- # assumed that no part of a normal pathname contains ";" but that should
+- # okay in the real world where ";" in dirpaths is itself problematic.
+- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+- else
+- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+- fi
+- # Ok, now we have the path, separated by spaces, we can step through it
+- # and add multilib dir if necessary.
+- lt_tmp_lt_search_path_spec=
+- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+- for lt_sys_path in $lt_search_path_spec; do
+- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+- else
+- test -d "$lt_sys_path" && \
+- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+- fi
+- done
+- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+-BEGIN {RS=" "; FS="/|\n";} {
+- lt_foo="";
+- lt_count=0;
+- for (lt_i = NF; lt_i > 0; lt_i--) {
+- if ($lt_i != "" && $lt_i != ".") {
+- if ($lt_i == "..") {
+- lt_count++;
+- } else {
+- if (lt_count == 0) {
+- lt_foo="/" $lt_i lt_foo;
+- } else {
+- lt_count--;
+- }
+- }
+- }
+- }
+- if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+- if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+-}'`
+- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+-else
+- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+-fi])
+-library_names_spec=
+-libname_spec='lib$name'
+-soname_spec=
+-shrext_cmds=".so"
+-postinstall_cmds=
+-postuninstall_cmds=
+-finish_cmds=
+-finish_eval=
+-shlibpath_var=
+-shlibpath_overrides_runpath=unknown
+-version_type=none
+-dynamic_linker="$host_os ld.so"
+-sys_lib_dlsearch_path_spec="/lib /usr/lib"
+-need_lib_prefix=unknown
+-hardcode_into_libs=no
+-
+-# when you set need_version to no, make sure it does not cause -set_version
+-# flags to be left without arguments
+-need_version=unknown
+-
+-case $host_os in
+-aix3*)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+- shlibpath_var=LIBPATH
+-
+- # AIX 3 has no versioning support, so we append a major version to the name.
+- soname_spec='${libname}${release}${shared_ext}$major'
+- ;;
+-
+-aix[[4-9]]*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- hardcode_into_libs=yes
+- if test "$host_cpu" = ia64; then
+- # AIX 5 supports IA64
+- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- else
+- # With GCC up to 2.95.x, collect2 would create an import file
+- # for dependence libraries. The import file would start with
+- # the line `#! .'. This would cause the generated library to
+- # depend on `.', always an invalid library. This was fixed in
+- # development snapshots of GCC prior to 3.0.
+- case $host_os in
+- aix4 | aix4.[[01]] | aix4.[[01]].*)
+- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+- echo ' yes '
+- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+- :
+- else
+- can_build_shared=no
+- fi
+- ;;
+- esac
+- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+- # soname into executable. Probably we can add versioning support to
+- # collect2, so additional links can be useful in future.
+- if test "$aix_use_runtimelinking" = yes; then
+- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+- # instead of lib<name>.a to let people know that these are not
+- # typical AIX shared libraries.
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- else
+- # We preserve .a as extension for shared libraries through AIX4.2
+- # and later when we are not doing run time linking.
+- library_names_spec='${libname}${release}.a $libname.a'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- fi
+- shlibpath_var=LIBPATH
+- fi
+- ;;
+-
+-amigaos*)
+- case $host_cpu in
+- powerpc)
+- # Since July 2007 AmigaOS4 officially supports .so libraries.
+- # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- ;;
+- m68k)
+- library_names_spec='$libname.ixlibrary $libname.a'
+- # Create ${libname}_ixlibrary.a entries in /sys/libs.
+- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+- ;;
+- esac
+- ;;
+-
+-beos*)
+- library_names_spec='${libname}${shared_ext}'
+- dynamic_linker="$host_os ld.so"
+- shlibpath_var=LIBRARY_PATH
+- ;;
+-
+-bsdi[[45]]*)
+- version_type=linux
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+- # the default ld.so.conf also contains /usr/contrib/lib and
+- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+- # libtool to hard-code these into programs
+- ;;
+-
+-cygwin* | mingw* | pw32* | cegcc*)
+- version_type=windows
+- shrext_cmds=".dll"
+- need_version=no
+- need_lib_prefix=no
+-
+- case $GCC,$host_os in
+- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+- library_names_spec='$libname.dll.a'
+- # DLL is installed to $(libdir)/../bin by postinstall_cmds
+- postinstall_cmds='base_file=`basename \${file}`~
+- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+- dldir=$destdir/`dirname \$dlpath`~
+- test -d \$dldir || mkdir -p \$dldir~
+- $install_prog $dir/$dlname \$dldir/$dlname~
+- chmod a+x \$dldir/$dlname~
+- if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+- eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+- fi'
+- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+- dlpath=$dir/\$dldll~
+- $RM \$dlpath'
+- shlibpath_overrides_runpath=yes
+-
+- case $host_os in
+- cygwin*)
+- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+- ;;
+- mingw* | cegcc*)
+- # MinGW DLLs use traditional 'lib' prefix
+- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+- if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+- # It is most probably a Windows format PATH printed by
+- # mingw gcc, but we are running on Cygwin. Gcc prints its search
+- # path with ; separators, and with drive letters. We can handle the
+- # drive letters (cygwin fileutils understands them), so leave them,
+- # especially as we might pass files found there to a mingw objdump,
+- # which wouldn't understand a cygwinified path. Ahh.
+- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+- else
+- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+- fi
+- ;;
+- pw32*)
+- # pw32 DLLs use 'pw' prefix rather than 'lib'
+- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+- ;;
+- esac
+- ;;
+-
+- *)
+- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+- ;;
+- esac
+- dynamic_linker='Win32 ld.exe'
+- # FIXME: first we should search . and the directory the executable is in
+- shlibpath_var=PATH
+- ;;
+-
+-darwin* | rhapsody*)
+- dynamic_linker="$host_os dyld"
+- version_type=darwin
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+- soname_spec='${libname}${release}${major}$shared_ext'
+- shlibpath_overrides_runpath=yes
+- shlibpath_var=DYLD_LIBRARY_PATH
+- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+-m4_if([$1], [],[
+- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+- ;;
+-
+-dgux*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- ;;
+-
+-freebsd1*)
+- dynamic_linker=no
+- ;;
+-
+-freebsd* | dragonfly*)
+- # DragonFly does not have aout. When/if they implement a new
+- # versioning mechanism, adjust this.
+- if test -x /usr/bin/objformat; then
+- objformat=`/usr/bin/objformat`
+- else
+- case $host_os in
+- freebsd[[123]]*) objformat=aout ;;
+- *) objformat=elf ;;
+- esac
+- fi
+- version_type=freebsd-$objformat
+- case $version_type in
+- freebsd-elf*)
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+- need_version=no
+- need_lib_prefix=no
+- ;;
+- freebsd-*)
+- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+- need_version=yes
+- ;;
+- esac
+- shlibpath_var=LD_LIBRARY_PATH
+- case $host_os in
+- freebsd2*)
+- shlibpath_overrides_runpath=yes
+- ;;
+- freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- ;;
+- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- ;;
+- *) # from 4.6 on, and DragonFly
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- ;;
+- esac
+- ;;
+-
+-gnu*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- hardcode_into_libs=yes
+- ;;
+-
+-hpux9* | hpux10* | hpux11*)
+- # Give a soname corresponding to the major version so that dld.sl refuses to
+- # link against other versions.
+- version_type=sunos
+- need_lib_prefix=no
+- need_version=no
+- case $host_cpu in
+- ia64*)
+- shrext_cmds='.so'
+- hardcode_into_libs=yes
+- dynamic_linker="$host_os dld.so"
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- if test "X$HPUX_IA64_MODE" = X32; then
+- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+- else
+- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+- fi
+- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+- ;;
+- hppa*64*)
+- shrext_cmds='.sl'
+- hardcode_into_libs=yes
+- dynamic_linker="$host_os dld.sl"
+- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+- ;;
+- *)
+- shrext_cmds='.sl'
+- dynamic_linker="$host_os dld.sl"
+- shlibpath_var=SHLIB_PATH
+- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- ;;
+- esac
+- # HP-UX runs *really* slowly unless shared libraries are mode 555.
+- postinstall_cmds='chmod 555 $lib'
+- ;;
+-
+-interix[[3-9]]*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- ;;
+-
+-irix5* | irix6* | nonstopux*)
+- case $host_os in
+- nonstopux*) version_type=nonstopux ;;
+- *)
+- if test "$lt_cv_prog_gnu_ld" = yes; then
+- version_type=linux
+- else
+- version_type=irix
+- fi ;;
+- esac
+- need_lib_prefix=no
+- need_version=no
+- soname_spec='${libname}${release}${shared_ext}$major'
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+- case $host_os in
+- irix5* | nonstopux*)
+- libsuff= shlibsuff=
+- ;;
+- *)
+- case $LD in # libtool.m4 will add one of these switches to LD
+- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+- libsuff= shlibsuff= libmagic=32-bit;;
+- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+- libsuff=32 shlibsuff=N32 libmagic=N32;;
+- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+- libsuff=64 shlibsuff=64 libmagic=64-bit;;
+- *) libsuff= shlibsuff= libmagic=never-match;;
+- esac
+- ;;
+- esac
+- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+- shlibpath_overrides_runpath=no
+- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+- hardcode_into_libs=yes
+- ;;
+-
+-# No shared lib support for Linux oldld, aout, or coff.
+-linux*oldld* | linux*aout* | linux*coff*)
+- dynamic_linker=no
+- ;;
+-
+-# This must be Linux ELF.
+-linux* | k*bsd*-gnu)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- # Some binutils ld are patched to set DT_RUNPATH
+- save_LDFLAGS=$LDFLAGS
+- save_libdir=$libdir
+- eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+- LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+- [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+- [shlibpath_overrides_runpath=yes])])
+- LDFLAGS=$save_LDFLAGS
+- libdir=$save_libdir
+-
+- # This implies no fast_install, which is unacceptable.
+- # Some rework will be needed to allow for fast_install
+- # before this can be enabled.
+- hardcode_into_libs=yes
+-
+- # Append ld.so.conf contents to the search path
+- if test -f /etc/ld.so.conf; then
+- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+- fi
+-
+- # We used to test for /lib/ld.so.1 and disable shared libraries on
+- # powerpc, because MkLinux only supported shared libraries with the
+- # GNU dynamic linker. Since this was broken with cross compilers,
+- # most powerpc-linux boxes support dynamic linking these days and
+- # people can always --disable-shared, the test was removed, and we
+- # assume the GNU/Linux dynamic linker is in use.
+- dynamic_linker='GNU/Linux ld.so'
+- ;;
+-
+-netbsd*)
+- version_type=sunos
+- need_lib_prefix=no
+- need_version=no
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+- dynamic_linker='NetBSD (a.out) ld.so'
+- else
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- dynamic_linker='NetBSD ld.elf_so'
+- fi
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- ;;
+-
+-newsos6)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- ;;
+-
+-*nto* | *qnx*)
+- version_type=qnx
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- dynamic_linker='ldqnx.so'
+- ;;
+-
+-openbsd*)
+- version_type=sunos
+- sys_lib_dlsearch_path_spec="/usr/lib"
+- need_lib_prefix=no
+- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+- case $host_os in
+- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+- *) need_version=no ;;
+- esac
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- case $host_os in
+- openbsd2.[[89]] | openbsd2.[[89]].*)
+- shlibpath_overrides_runpath=no
+- ;;
+- *)
+- shlibpath_overrides_runpath=yes
+- ;;
+- esac
+- else
+- shlibpath_overrides_runpath=yes
+- fi
+- ;;
+-
+-os2*)
+- libname_spec='$name'
+- shrext_cmds=".dll"
+- need_lib_prefix=no
+- library_names_spec='$libname${shared_ext} $libname.a'
+- dynamic_linker='OS/2 ld.exe'
+- shlibpath_var=LIBPATH
+- ;;
+-
+-osf3* | osf4* | osf5*)
+- version_type=osf
+- need_lib_prefix=no
+- need_version=no
+- soname_spec='${libname}${release}${shared_ext}$major'
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+- ;;
+-
+-rdos*)
+- dynamic_linker=no
+- ;;
+-
+-solaris*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- # ldd complains unless libraries are executable
+- postinstall_cmds='chmod +x $lib'
+- ;;
+-
+-sunos4*)
+- version_type=sunos
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- if test "$with_gnu_ld" = yes; then
+- need_lib_prefix=no
+- fi
+- need_version=yes
+- ;;
+-
+-sysv4 | sysv4.3*)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- case $host_vendor in
+- sni)
+- shlibpath_overrides_runpath=no
+- need_lib_prefix=no
+- runpath_var=LD_RUN_PATH
+- ;;
+- siemens)
+- need_lib_prefix=no
+- ;;
+- motorola)
+- need_lib_prefix=no
+- need_version=no
+- shlibpath_overrides_runpath=no
+- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+- ;;
+- esac
+- ;;
+-
+-sysv4*MP*)
+- if test -d /usr/nec ;then
+- version_type=linux
+- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+- soname_spec='$libname${shared_ext}.$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- fi
+- ;;
+-
+-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+- version_type=freebsd-elf
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=yes
+- hardcode_into_libs=yes
+- if test "$with_gnu_ld" = yes; then
+- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+- else
+- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+- case $host_os in
+- sco3.2v5*)
+- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+- ;;
+- esac
+- fi
+- sys_lib_dlsearch_path_spec='/usr/lib'
+- ;;
+-
+-tpf*)
+- # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- ;;
+-
+-uts4*)
+- version_type=linux
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- ;;
+-
+-*)
+- dynamic_linker=no
+- ;;
+-esac
+-AC_MSG_RESULT([$dynamic_linker])
+-test "$dynamic_linker" = no && can_build_shared=no
+-
+-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+-if test "$GCC" = yes; then
+- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+-fi
+-
+-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+-fi
+-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+-fi
+-
+-_LT_DECL([], [variables_saved_for_relink], [1],
+- [Variables whose values should be saved in libtool wrapper scripts and
+- restored at link time])
+-_LT_DECL([], [need_lib_prefix], [0],
+- [Do we need the "lib" prefix for modules?])
+-_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+-_LT_DECL([], [version_type], [0], [Library versioning type])
+-_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
+-_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+-_LT_DECL([], [shlibpath_overrides_runpath], [0],
+- [Is shlibpath searched before the hard-coded library search path?])
+-_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+-_LT_DECL([], [library_names_spec], [1],
+- [[List of archive names. First name is the real one, the rest are links.
+- The last name is the one that the linker finds with -lNAME]])
+-_LT_DECL([], [soname_spec], [1],
+- [[The coded name of the library, if different from the real name]])
+-_LT_DECL([], [postinstall_cmds], [2],
+- [Command to use after installation of a shared archive])
+-_LT_DECL([], [postuninstall_cmds], [2],
+- [Command to use after uninstallation of a shared archive])
+-_LT_DECL([], [finish_cmds], [2],
+- [Commands used to finish a libtool library installation in a directory])
+-_LT_DECL([], [finish_eval], [1],
+- [[As "finish_cmds", except a single script fragment to be evaled but
+- not shown]])
+-_LT_DECL([], [hardcode_into_libs], [0],
+- [Whether we should hardcode library paths into libraries])
+-_LT_DECL([], [sys_lib_search_path_spec], [2],
+- [Compile-time system search path for libraries])
+-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+- [Run-time system search path for libraries])
+-])# _LT_SYS_DYNAMIC_LINKER
+-
+-
+-# _LT_PATH_TOOL_PREFIX(TOOL)
+-# --------------------------
+-# find a file program which can recognize shared library
+-AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+-[m4_require([_LT_DECL_EGREP])dnl
+-AC_MSG_CHECKING([for $1])
+-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+-[case $MAGIC_CMD in
+-[[\\/*] | ?:[\\/]*])
+- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+- ;;
+-*)
+- lt_save_MAGIC_CMD="$MAGIC_CMD"
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+-dnl $ac_dummy forces splitting on constant user-supplied paths.
+-dnl POSIX.2 word splitting is done only on the output of word expansions,
+-dnl not every word. This closes a longstanding sh security hole.
+- ac_dummy="m4_if([$2], , $PATH, [$2])"
+- for ac_dir in $ac_dummy; do
+- IFS="$lt_save_ifs"
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$1; then
+- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+- if test -n "$file_magic_test_file"; then
+- case $deplibs_check_method in
+- "file_magic "*)
+- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+- $EGREP "$file_magic_regex" > /dev/null; then
+- :
+- else
+- cat <<_LT_EOF 1>&2
+-
+-*** Warning: the command libtool uses to detect shared libraries,
+-*** $file_magic_cmd, produces output that libtool cannot recognize.
+-*** The result is that libtool may fail to recognize shared libraries
+-*** as such. This will affect the creation of libtool libraries that
+-*** depend on shared libraries, but programs linked with such libtool
+-*** libraries will work regardless of this problem. Nevertheless, you
+-*** may want to report the problem to your system manager and/or to
+-*** bug-libtool@gnu.org
+-
+-_LT_EOF
+- fi ;;
+- esac
+- fi
+- break
+- fi
+- done
+- IFS="$lt_save_ifs"
+- MAGIC_CMD="$lt_save_MAGIC_CMD"
+- ;;
+-esac])
+-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+-if test -n "$MAGIC_CMD"; then
+- AC_MSG_RESULT($MAGIC_CMD)
+-else
+- AC_MSG_RESULT(no)
+-fi
+-_LT_DECL([], [MAGIC_CMD], [0],
+- [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+-])# _LT_PATH_TOOL_PREFIX
+-
+-# Old name:
+-AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+-
+-
+-# _LT_PATH_MAGIC
+-# --------------
+-# find a file program which can recognize a shared library
+-m4_defun([_LT_PATH_MAGIC],
+-[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+-if test -z "$lt_cv_path_MAGIC_CMD"; then
+- if test -n "$ac_tool_prefix"; then
+- _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+- else
+- MAGIC_CMD=:
+- fi
+-fi
+-])# _LT_PATH_MAGIC
+-
+-
+-# LT_PATH_LD
+-# ----------
+-# find the pathname to the GNU or non-GNU linker
+-AC_DEFUN([LT_PATH_LD],
+-[AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+-m4_require([_LT_DECL_SED])dnl
+-m4_require([_LT_DECL_EGREP])dnl
+-
+-AC_ARG_WITH([gnu-ld],
+- [AS_HELP_STRING([--with-gnu-ld],
+- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+- [test "$withval" = no || with_gnu_ld=yes],
+- [with_gnu_ld=no])dnl
+-
+-ac_prog=ld
+-if test "$GCC" = yes; then
+- # Check if gcc -print-prog-name=ld gives a path.
+- AC_MSG_CHECKING([for ld used by $CC])
+- case $host in
+- *-*-mingw*)
+- # gcc leaves a trailing carriage return which upsets mingw
+- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+- *)
+- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+- esac
+- case $ac_prog in
+- # Accept absolute paths.
+- [[\\/]]* | ?:[[\\/]]*)
+- re_direlt='/[[^/]][[^/]]*/\.\./'
+- # Canonicalize the pathname of ld
+- ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+- ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+- done
+- test -z "$LD" && LD="$ac_prog"
+- ;;
+- "")
+- # If it fails, then pretend we aren't using GCC.
+- ac_prog=ld
+- ;;
+- *)
+- # If it is relative, then search for the first ld in PATH.
+- with_gnu_ld=unknown
+- ;;
+- esac
+-elif test "$with_gnu_ld" = yes; then
+- AC_MSG_CHECKING([for GNU ld])
+-else
+- AC_MSG_CHECKING([for non-GNU ld])
+-fi
+-AC_CACHE_VAL(lt_cv_path_LD,
+-[if test -z "$LD"; then
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for ac_dir in $PATH; do
+- IFS="$lt_save_ifs"
+- test -z "$ac_dir" && ac_dir=.
+- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+- lt_cv_path_LD="$ac_dir/$ac_prog"
+- # Check to see if the program is GNU ld. I'd rather use --version,
+- # but apparently some variants of GNU ld only accept -v.
+- # Break only if it was the GNU/non-GNU ld that we prefer.
+- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+- *GNU* | *'with BFD'*)
+- test "$with_gnu_ld" != no && break
+- ;;
+- *)
+- test "$with_gnu_ld" != yes && break
+- ;;
+- esac
+- fi
+- done
+- IFS="$lt_save_ifs"
+-else
+- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+-fi])
+-LD="$lt_cv_path_LD"
+-if test -n "$LD"; then
+- AC_MSG_RESULT($LD)
+-else
+- AC_MSG_RESULT(no)
+-fi
+-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+-_LT_PATH_LD_GNU
+-AC_SUBST([LD])
+-
+-_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+-])# LT_PATH_LD
+-
+-# Old names:
+-AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+-AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AM_PROG_LD], [])
+-dnl AC_DEFUN([AC_PROG_LD], [])
+-
+-
+-# _LT_PATH_LD_GNU
+-#- --------------
+-m4_defun([_LT_PATH_LD_GNU],
+-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+-case `$LD -v 2>&1 </dev/null` in
+-*GNU* | *'with BFD'*)
+- lt_cv_prog_gnu_ld=yes
+- ;;
+-*)
+- lt_cv_prog_gnu_ld=no
+- ;;
+-esac])
+-with_gnu_ld=$lt_cv_prog_gnu_ld
+-])# _LT_PATH_LD_GNU
+-
+-
+-# _LT_CMD_RELOAD
+-# --------------
+-# find reload flag for linker
+-# -- PORTME Some linkers may need a different reload flag.
+-m4_defun([_LT_CMD_RELOAD],
+-[AC_CACHE_CHECK([for $LD option to reload object files],
+- lt_cv_ld_reload_flag,
+- [lt_cv_ld_reload_flag='-r'])
+-reload_flag=$lt_cv_ld_reload_flag
+-case $reload_flag in
+-"" | " "*) ;;
+-*) reload_flag=" $reload_flag" ;;
+-esac
+-reload_cmds='$LD$reload_flag -o $output$reload_objs'
+-case $host_os in
+- darwin*)
+- if test "$GCC" = yes; then
+- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+- else
+- reload_cmds='$LD$reload_flag -o $output$reload_objs'
+- fi
+- ;;
+-esac
+-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+-_LT_DECL([], [reload_cmds], [2])dnl
+-])# _LT_CMD_RELOAD
+-
+-
+-# _LT_CHECK_MAGIC_METHOD
+-# ----------------------
+-# how to check for library dependencies
+-# -- PORTME fill in with the dynamic library characteristics
+-m4_defun([_LT_CHECK_MAGIC_METHOD],
+-[m4_require([_LT_DECL_EGREP])
+-m4_require([_LT_DECL_OBJDUMP])
+-AC_CACHE_CHECK([how to recognize dependent libraries],
+-lt_cv_deplibs_check_method,
+-[lt_cv_file_magic_cmd='$MAGIC_CMD'
+-lt_cv_file_magic_test_file=
+-lt_cv_deplibs_check_method='unknown'
+-# Need to set the preceding variable on all platforms that support
+-# interlibrary dependencies.
+-# 'none' -- dependencies not supported.
+-# `unknown' -- same as none, but documents that we really don't know.
+-# 'pass_all' -- all dependencies passed with no checks.
+-# 'test_compile' -- check by making test program.
+-# 'file_magic [[regex]]' -- check by looking for files in library path
+-# which responds to the $file_magic_cmd with a given extended regex.
+-# If you have `file' or equivalent on your system and you're not sure
+-# whether `pass_all' will *always* work, you probably want this one.
+-
+-case $host_os in
+-aix[[4-9]]*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-beos*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-bsdi[[45]]*)
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+- lt_cv_file_magic_cmd='/usr/bin/file -L'
+- lt_cv_file_magic_test_file=/shlib/libc.so
+- ;;
+-
+-cygwin*)
+- # func_win32_libid is a shell function defined in ltmain.sh
+- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+- lt_cv_file_magic_cmd='func_win32_libid'
+- ;;
+-
+-mingw* | pw32*)
+- # Base MSYS/MinGW do not provide the 'file' command needed by
+- # func_win32_libid shell function, so use a weaker test based on 'objdump',
+- # unless we find 'file', for example because we are cross-compiling.
+- if ( file / ) >/dev/null 2>&1; then
+- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+- lt_cv_file_magic_cmd='func_win32_libid'
+- else
+- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+- lt_cv_file_magic_cmd='$OBJDUMP -f'
+- fi
+- ;;
+-
+-cegcc)
+- # use the weaker test based on 'objdump'. See mingw*.
+- lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+- lt_cv_file_magic_cmd='$OBJDUMP -f'
+- ;;
+-
+-darwin* | rhapsody*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-freebsd* | dragonfly*)
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+- case $host_cpu in
+- i*86 )
+- # Not sure whether the presence of OpenBSD here was a mistake.
+- # Let's accept both of them until this is cleared up.
+- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+- lt_cv_file_magic_cmd=/usr/bin/file
+- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+- ;;
+- esac
+- else
+- lt_cv_deplibs_check_method=pass_all
+- fi
+- ;;
+-
+-gnu*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-hpux10.20* | hpux11*)
+- lt_cv_file_magic_cmd=/usr/bin/file
+- case $host_cpu in
+- ia64*)
+- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+- ;;
+- hppa*64*)
+- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+- ;;
+- *)
+- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+- lt_cv_file_magic_test_file=/usr/lib/libc.sl
+- ;;
+- esac
+- ;;
+-
+-interix[[3-9]]*)
+- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+- ;;
+-
+-irix5* | irix6* | nonstopux*)
+- case $LD in
+- *-32|*"-32 ") libmagic=32-bit;;
+- *-n32|*"-n32 ") libmagic=N32;;
+- *-64|*"-64 ") libmagic=64-bit;;
+- *) libmagic=never-match;;
+- esac
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-# This must be Linux ELF.
+-linux* | k*bsd*-gnu)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-netbsd*)
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+- else
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+- fi
+- ;;
+-
+-newos6*)
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+- lt_cv_file_magic_cmd=/usr/bin/file
+- lt_cv_file_magic_test_file=/usr/lib/libnls.so
+- ;;
+-
+-*nto* | *qnx*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-openbsd*)
+- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+- else
+- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+- fi
+- ;;
+-
+-osf3* | osf4* | osf5*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-rdos*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-solaris*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-
+-sysv4 | sysv4.3*)
+- case $host_vendor in
+- motorola)
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+- ;;
+- ncr)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+- sequent)
+- lt_cv_file_magic_cmd='/bin/file'
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+- ;;
+- sni)
+- lt_cv_file_magic_cmd='/bin/file'
+- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+- lt_cv_file_magic_test_file=/lib/libc.so
+- ;;
+- siemens)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+- pc)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+- esac
+- ;;
+-
+-tpf*)
+- lt_cv_deplibs_check_method=pass_all
+- ;;
+-esac
+-])
+-file_magic_cmd=$lt_cv_file_magic_cmd
+-deplibs_check_method=$lt_cv_deplibs_check_method
+-test -z "$deplibs_check_method" && deplibs_check_method=unknown
+-
+-_LT_DECL([], [deplibs_check_method], [1],
+- [Method to check whether dependent libraries are shared objects])
+-_LT_DECL([], [file_magic_cmd], [1],
+- [Command to use when deplibs_check_method == "file_magic"])
+-])# _LT_CHECK_MAGIC_METHOD
+-
+-
+-# LT_PATH_NM
+-# ----------
+-# find the pathname to a BSD- or MS-compatible name lister
+-AC_DEFUN([LT_PATH_NM],
+-[AC_REQUIRE([AC_PROG_CC])dnl
+-AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+-[if test -n "$NM"; then
+- # Let the user override the test.
+- lt_cv_path_NM="$NM"
+-else
+- lt_nm_to_check="${ac_tool_prefix}nm"
+- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+- lt_nm_to_check="$lt_nm_to_check nm"
+- fi
+- for lt_tmp_nm in $lt_nm_to_check; do
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+- IFS="$lt_save_ifs"
+- test -z "$ac_dir" && ac_dir=.
+- tmp_nm="$ac_dir/$lt_tmp_nm"
+- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+- # Check to see if the nm accepts a BSD-compat flag.
+- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+- # nm: unknown option "B" ignored
+- # Tru64's nm complains that /dev/null is an invalid object file
+- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+- */dev/null* | *'Invalid file or object type'*)
+- lt_cv_path_NM="$tmp_nm -B"
+- break
+- ;;
+- *)
+- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+- */dev/null*)
+- lt_cv_path_NM="$tmp_nm -p"
+- break
+- ;;
+- *)
+- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+- continue # so that we can try to find one that supports BSD flags
+- ;;
+- esac
+- ;;
+- esac
+- fi
+- done
+- IFS="$lt_save_ifs"
+- done
+- : ${lt_cv_path_NM=no}
+-fi])
+-if test "$lt_cv_path_NM" != "no"; then
+- NM="$lt_cv_path_NM"
+-else
+- # Didn't find any BSD compatible name lister, look for dumpbin.
+- AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+- AC_SUBST([DUMPBIN])
+- if test "$DUMPBIN" != ":"; then
+- NM="$DUMPBIN"
+- fi
+-fi
+-test -z "$NM" && NM=nm
+-AC_SUBST([NM])
+-_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+-
+-AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+- [lt_cv_nm_interface="BSD nm"
+- echo "int some_variable = 0;" > conftest.$ac_ext
+- (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+- (eval "$ac_compile" 2>conftest.err)
+- cat conftest.err >&AS_MESSAGE_LOG_FD
+- (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+- (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+- cat conftest.err >&AS_MESSAGE_LOG_FD
+- (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+- cat conftest.out >&AS_MESSAGE_LOG_FD
+- if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+- lt_cv_nm_interface="MS dumpbin"
+- fi
+- rm -f conftest*])
+-])# LT_PATH_NM
+-
+-# Old names:
+-AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+-AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AM_PROG_NM], [])
+-dnl AC_DEFUN([AC_PROG_NM], [])
+-
+-
+-# LT_LIB_M
+-# --------
+-# check for math library
+-AC_DEFUN([LT_LIB_M],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-LIBM=
+-case $host in
+-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+- # These system don't have libm, or don't need it
+- ;;
+-*-ncr-sysv4.3*)
+- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+- ;;
+-*)
+- AC_CHECK_LIB(m, cos, LIBM="-lm")
+- ;;
+-esac
+-AC_SUBST([LIBM])
+-])# LT_LIB_M
+-
+-# Old name:
+-AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_CHECK_LIBM], [])
+-
+-
+-# _LT_COMPILER_NO_RTTI([TAGNAME])
+-# -------------------------------
+-m4_defun([_LT_COMPILER_NO_RTTI],
+-[m4_require([_LT_TAG_COMPILER])dnl
+-
+-_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+-
+-if test "$GCC" = yes; then
+- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+-
+- _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+- lt_cv_prog_compiler_rtti_exceptions,
+- [-fno-rtti -fno-exceptions], [],
+- [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+-fi
+-_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+- [Compiler flag to turn off builtin functions])
+-])# _LT_COMPILER_NO_RTTI
+-
+-
+-# _LT_CMD_GLOBAL_SYMBOLS
+-# ----------------------
+-m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([LT_PATH_NM])dnl
+-AC_REQUIRE([LT_PATH_LD])dnl
+-m4_require([_LT_DECL_SED])dnl
+-m4_require([_LT_DECL_EGREP])dnl
+-m4_require([_LT_TAG_COMPILER])dnl
+-
+-# Check for command to grab the raw symbol name followed by C symbol from nm.
+-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+-[
+-# These are sane defaults that work on at least a few old systems.
+-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+-
+-# Character class describing NM global symbol codes.
+-symcode='[[BCDEGRST]]'
+-
+-# Regexp to match symbols that can be accessed directly from C.
+-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+-
+-# Define system-specific variables.
+-case $host_os in
+-aix*)
+- symcode='[[BCDT]]'
+- ;;
+-cygwin* | mingw* | pw32* | cegcc*)
+- symcode='[[ABCDGISTW]]'
+- ;;
+-hpux*)
+- if test "$host_cpu" = ia64; then
+- symcode='[[ABCDEGRST]]'
+- fi
+- ;;
+-irix* | nonstopux*)
+- symcode='[[BCDEGRST]]'
+- ;;
+-osf*)
+- symcode='[[BCDEGQRST]]'
+- ;;
+-solaris*)
+- symcode='[[BDRT]]'
+- ;;
+-sco3.2v5*)
+- symcode='[[DT]]'
+- ;;
+-sysv4.2uw2*)
+- symcode='[[DT]]'
+- ;;
+-sysv5* | sco5v6* | unixware* | OpenUNIX*)
+- symcode='[[ABDT]]'
+- ;;
+-sysv4)
+- symcode='[[DFNSTU]]'
+- ;;
+-esac
+-
+-# If we're using GNU nm, then use its standard symbol codes.
+-case `$NM -V 2>&1` in
+-*GNU* | *'with BFD'*)
+- symcode='[[ABCDGIRSTW]]' ;;
+-esac
+-
+-# Transform an extracted symbol line into a proper C declaration.
+-# Some systems (esp. on ia64) link data and code symbols differently,
+-# so use this general approach.
+-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+-
+-# Transform an extracted symbol line into symbol name and symbol address
+-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+-
+-# Handle CRLF in mingw tool chain
+-opt_cr=
+-case $build_os in
+-mingw*)
+- opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+- ;;
+-esac
+-
+-# Try without a prefix underscore, then with it.
+-for ac_symprfx in "" "_"; do
+-
+- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+- symxfrm="\\1 $ac_symprfx\\2 \\2"
+-
+- # Write the raw and C identifiers.
+- if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+- # Fake it for dumpbin and say T for any non-static function
+- # and D for any global variable.
+- # Also find C++ and __fastcall symbols from MSVC++,
+- # which start with @ or ?.
+- lt_cv_sys_global_symbol_pipe="$AWK ['"\
+-" {last_section=section; section=\$ 3};"\
+-" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+-" \$ 0!~/External *\|/{next};"\
+-" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+-" {if(hide[section]) next};"\
+-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+-" ' prfx=^$ac_symprfx]"
+- else
+- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+- fi
+-
+- # Check to see that the pipe works correctly.
+- pipe_works=no
+-
+- rm -f conftest*
+- cat > conftest.$ac_ext <<_LT_EOF
+-#ifdef __cplusplus
+-extern "C" {
+-#endif
+-char nm_test_var;
+-void nm_test_func(void);
+-void nm_test_func(void){}
+-#ifdef __cplusplus
+-}
+-#endif
+-int main(){nm_test_var='a';nm_test_func();return(0);}
+-_LT_EOF
+-
+- if AC_TRY_EVAL(ac_compile); then
+- # Now try to grab the symbols.
+- nlist=conftest.nm
+- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+- # Try sorting and uniquifying the output.
+- if sort "$nlist" | uniq > "$nlist"T; then
+- mv -f "$nlist"T "$nlist"
+- else
+- rm -f "$nlist"T
+- fi
+-
+- # Make sure that we snagged all the symbols we need.
+- if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+- if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+- cat <<_LT_EOF > conftest.$ac_ext
+-#ifdef __cplusplus
+-extern "C" {
+-#endif
+-
+-_LT_EOF
+- # Now generate the symbol file.
+- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+-
+- cat <<_LT_EOF >> conftest.$ac_ext
+-
+-/* The mapping between symbol names and symbols. */
+-const struct {
+- const char *name;
+- void *address;
+-}
+-lt__PROGRAM__LTX_preloaded_symbols[[]] =
+-{
+- { "@PROGRAM@", (void *) 0 },
+-_LT_EOF
+- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+- cat <<\_LT_EOF >> conftest.$ac_ext
+- {0, (void *) 0}
+-};
+-
+-/* This works around a problem in FreeBSD linker */
+-#ifdef FREEBSD_WORKAROUND
+-static const void *lt_preloaded_setup() {
+- return lt__PROGRAM__LTX_preloaded_symbols;
+-}
+-#endif
+-
+-#ifdef __cplusplus
+-}
+-#endif
+-_LT_EOF
+- # Now try linking the two files.
+- mv conftest.$ac_objext conftstm.$ac_objext
+- lt_save_LIBS="$LIBS"
+- lt_save_CFLAGS="$CFLAGS"
+- LIBS="conftstm.$ac_objext"
+- CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+- pipe_works=yes
+- fi
+- LIBS="$lt_save_LIBS"
+- CFLAGS="$lt_save_CFLAGS"
+- else
+- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+- fi
+- else
+- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+- fi
+- else
+- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+- fi
+- else
+- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+- cat conftest.$ac_ext >&5
+- fi
+- rm -rf conftest* conftst*
+-
+- # Do not use the global_symbol_pipe unless it works.
+- if test "$pipe_works" = yes; then
+- break
+- else
+- lt_cv_sys_global_symbol_pipe=
+- fi
+-done
+-])
+-if test -z "$lt_cv_sys_global_symbol_pipe"; then
+- lt_cv_sys_global_symbol_to_cdecl=
+-fi
+-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+- AC_MSG_RESULT(failed)
+-else
+- AC_MSG_RESULT(ok)
+-fi
+-
+-_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+- [Take the output of nm and produce a listing of raw symbols and C names])
+-_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+- [Transform the output of nm in a proper C declaration])
+-_LT_DECL([global_symbol_to_c_name_address],
+- [lt_cv_sys_global_symbol_to_c_name_address], [1],
+- [Transform the output of nm in a C name address pair])
+-_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+- [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+- [Transform the output of nm in a C name address pair when lib prefix is needed])
+-]) # _LT_CMD_GLOBAL_SYMBOLS
+-
+-
+-# _LT_COMPILER_PIC([TAGNAME])
+-# ---------------------------
+-m4_defun([_LT_COMPILER_PIC],
+-[m4_require([_LT_TAG_COMPILER])dnl
+-_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+-_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+-_LT_TAGVAR(lt_prog_compiler_static, $1)=
+-
+-AC_MSG_CHECKING([for $compiler option to produce PIC])
+-m4_if([$1], [CXX], [
+- # C++ specific cases for pic, static, wl, etc.
+- if test "$GXX" = yes; then
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+-
+- case $host_os in
+- aix*)
+- # All AIX code is PIC.
+- if test "$host_cpu" = ia64; then
+- # AIX 5 now supports IA64 processor
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- fi
+- ;;
+-
+- amigaos*)
+- case $host_cpu in
+- powerpc)
+- # see comment about AmigaOS4 .so support
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- m68k)
+- # FIXME: we need at least 68020 code to build shared libraries, but
+- # adding the `-m68020' flag to GCC prevents building anything better,
+- # like `-m68040'.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+- ;;
+- esac
+- ;;
+-
+- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+- # PIC is the default for these OSes.
+- ;;
+- mingw* | cygwin* | os2* | pw32* | cegcc*)
+- # This hack is so that the source file can tell whether it is being
+- # built for inclusion in a dll (and should export symbols for example).
+- # Although the cygwin gcc ignores -fPIC, still need this for old-style
+- # (--disable-auto-import) libraries
+- m4_if([$1], [GCJ], [],
+- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+- ;;
+- darwin* | rhapsody*)
+- # PIC is the default on this platform
+- # Common symbols not allowed in MH_DYLIB files
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+- ;;
+- *djgpp*)
+- # DJGPP does not support shared libraries at all
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+- ;;
+- interix[[3-9]]*)
+- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+- # Instead, we relocate shared libraries at runtime.
+- ;;
+- sysv4*MP*)
+- if test -d /usr/nec; then
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+- fi
+- ;;
+- hpux*)
+- # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+- # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+- # sets the default TLS model and affects inlining.
+- case $host_cpu in
+- hppa*64*)
+- ;;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- esac
+- ;;
+- *qnx* | *nto*)
+- # QNX uses GNU C++, but need to define -shared option too, otherwise
+- # it will coredump.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+- ;;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- esac
+- else
+- case $host_os in
+- aix[[4-9]]*)
+- # All AIX code is PIC.
+- if test "$host_cpu" = ia64; then
+- # AIX 5 now supports IA64 processor
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- else
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+- fi
+- ;;
+- chorus*)
+- case $cc_basename in
+- cxch68*)
+- # Green Hills C++ Compiler
+- # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+- ;;
+- esac
+- ;;
+- dgux*)
+- case $cc_basename in
+- ec++*)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- ;;
+- ghcx*)
+- # Green Hills C++ Compiler
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- freebsd* | dragonfly*)
+- # FreeBSD uses GNU C++
+- ;;
+- hpux9* | hpux10* | hpux11*)
+- case $cc_basename in
+- CC*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+- if test "$host_cpu" != ia64; then
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+- fi
+- ;;
+- aCC*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+- case $host_cpu in
+- hppa*64*|ia64*)
+- # +Z the default
+- ;;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+- ;;
+- esac
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- interix*)
+- # This is c89, which is MS Visual C++ (no shared libs)
+- # Anyone wants to do a port?
+- ;;
+- irix5* | irix6* | nonstopux*)
+- case $cc_basename in
+- CC*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- # CC pic flag -KPIC is the default.
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- linux* | k*bsd*-gnu)
+- case $cc_basename in
+- KCC*)
+- # KAI C++ Compiler
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- ecpc* )
+- # old Intel C++ for x86_64 which still supported -KPIC.
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+- ;;
+- icpc* )
+- # Intel C++, used to be incompatible with GCC.
+- # ICC 10 doesn't accept -KPIC any more.
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+- ;;
+- pgCC* | pgcpp*)
+- # Portland Group C++ compiler
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+- cxx*)
+- # Compaq C++
+- # Make sure the PIC flag is empty. It appears that all Alpha
+- # Linux and Compaq Tru64 Unix objects are PIC.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+- xlc* | xlC*)
+- # IBM XL 8.0 on PPC
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+- ;;
+- *)
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C++ 5.9
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+- ;;
+- esac
+- ;;
+- esac
+- ;;
+- lynxos*)
+- ;;
+- m88k*)
+- ;;
+- mvs*)
+- case $cc_basename in
+- cxx*)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- netbsd*)
+- ;;
+- *qnx* | *nto*)
+- # QNX uses GNU C++, but need to define -shared option too, otherwise
+- # it will coredump.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+- ;;
+- osf3* | osf4* | osf5*)
+- case $cc_basename in
+- KCC*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+- ;;
+- RCC*)
+- # Rational C++ 2.4.1
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+- ;;
+- cxx*)
+- # Digital/Compaq C++
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- # Make sure the PIC flag is empty. It appears that all Alpha
+- # Linux and Compaq Tru64 Unix objects are PIC.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- psos*)
+- ;;
+- solaris*)
+- case $cc_basename in
+- CC*)
+- # Sun C++ 4.2, 5.x and Centerline C++
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+- ;;
+- gcx*)
+- # Green Hills C++ Compiler
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- sunos4*)
+- case $cc_basename in
+- CC*)
+- # Sun C++ 4.x
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+- lcc*)
+- # Lucid
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+- case $cc_basename in
+- CC*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+- esac
+- ;;
+- tandem*)
+- case $cc_basename in
+- NCC*)
+- # NonStop-UX NCC 3.20
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+- vxworks*)
+- ;;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+- ;;
+- esac
+- fi
+-],
+-[
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+-
+- case $host_os in
+- aix*)
+- # All AIX code is PIC.
+- if test "$host_cpu" = ia64; then
+- # AIX 5 now supports IA64 processor
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- fi
+- ;;
+-
+- amigaos*)
+- case $host_cpu in
+- powerpc)
+- # see comment about AmigaOS4 .so support
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- m68k)
+- # FIXME: we need at least 68020 code to build shared libraries, but
+- # adding the `-m68020' flag to GCC prevents building anything better,
+- # like `-m68040'.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+- ;;
+- esac
+- ;;
+-
+- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+- # PIC is the default for these OSes.
+- ;;
+-
+- mingw* | cygwin* | pw32* | os2* | cegcc*)
+- # This hack is so that the source file can tell whether it is being
+- # built for inclusion in a dll (and should export symbols for example).
+- # Although the cygwin gcc ignores -fPIC, still need this for old-style
+- # (--disable-auto-import) libraries
+- m4_if([$1], [GCJ], [],
+- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+- ;;
+-
+- darwin* | rhapsody*)
+- # PIC is the default on this platform
+- # Common symbols not allowed in MH_DYLIB files
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+- ;;
+-
+- hpux*)
+- # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+- # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+- # sets the default TLS model and affects inlining.
+- case $host_cpu in
+- hppa*64*)
+- # +Z the default
+- ;;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- esac
+- ;;
+-
+- interix[[3-9]]*)
+- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+- # Instead, we relocate shared libraries at runtime.
+- ;;
+-
+- msdosdjgpp*)
+- # Just because we use GCC doesn't mean we suddenly get shared libraries
+- # on systems that don't support them.
+- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+- enable_shared=no
+- ;;
+-
+- *nto* | *qnx*)
+- # QNX uses GNU C++, but need to define -shared option too, otherwise
+- # it will coredump.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+- ;;
+-
+- sysv4*MP*)
+- if test -d /usr/nec; then
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+- fi
+- ;;
+-
+- *)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- esac
+- else
+- # PORTME Check for flag to pass linker flags through the system compiler.
+- case $host_os in
+- aix*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- if test "$host_cpu" = ia64; then
+- # AIX 5 now supports IA64 processor
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- else
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+- fi
+- ;;
+-
+- mingw* | cygwin* | pw32* | os2* | cegcc*)
+- # This hack is so that the source file can tell whether it is being
+- # built for inclusion in a dll (and should export symbols for example).
+- m4_if([$1], [GCJ], [],
+- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+- ;;
+-
+- hpux9* | hpux10* | hpux11*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+- # not for PA HP-UX.
+- case $host_cpu in
+- hppa*64*|ia64*)
+- # +Z the default
+- ;;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+- ;;
+- esac
+- # Is there a better lt_prog_compiler_static that works with the bundled CC?
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+- ;;
+-
+- irix5* | irix6* | nonstopux*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- # PIC (with -KPIC) is the default.
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+-
+- linux* | k*bsd*-gnu)
+- case $cc_basename in
+- # old Intel for x86_64 which still supported -KPIC.
+- ecc*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+- ;;
+- # icc used to be incompatible with GCC.
+- # ICC 10 doesn't accept -KPIC any more.
+- icc* | ifort*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+- ;;
+- # Lahey Fortran 8.1.
+- lf95*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+- ;;
+- pgcc* | pgf77* | pgf90* | pgf95*)
+- # Portland Group compilers (*not* the Pentium gcc compiler,
+- # which looks to be a dead project)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+- ccc*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- # All Alpha code is PIC.
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+- xl*)
+- # IBM XL C 8.0/Fortran 10.1 on PPC
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+- ;;
+- *)
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C 5.9
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- ;;
+- *Sun\ F*)
+- # Sun Fortran 8.3 passes all unrecognized flags to the linker
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+- ;;
+- esac
+- ;;
+- esac
+- ;;
+-
+- newsos6)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+-
+- *nto* | *qnx*)
+- # QNX uses GNU C++, but need to define -shared option too, otherwise
+- # it will coredump.
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+- ;;
+-
+- osf3* | osf4* | osf5*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- # All OSF/1 code is PIC.
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+-
+- rdos*)
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+- ;;
+-
+- solaris*)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- case $cc_basename in
+- f77* | f90* | f95*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+- esac
+- ;;
+-
+- sunos4*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+-
+- sysv4 | sysv4.2uw2* | sysv4.3*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+-
+- sysv4*MP*)
+- if test -d /usr/nec ;then
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- fi
+- ;;
+-
+- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+-
+- unicos*)
+- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+- ;;
+-
+- uts4*)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+- ;;
+-
+- *)
+- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+- ;;
+- esac
+- fi
+-])
+-case $host_os in
+- # For platforms which do not support PIC, -DPIC is meaningless:
+- *djgpp*)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+- ;;
+- *)
+- _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+- ;;
+-esac
+-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+- [How to pass a linker flag through the compiler])
+-
+-#
+-# Check to make sure the PIC flag actually works.
+-#
+-if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+- _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+- [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+- [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+- [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+- "" | " "*) ;;
+- *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+- esac],
+- [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+-fi
+-_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+- [Additional compiler flags for building library objects])
+-
+-#
+-# Check to make sure the static flag actually works.
+-#
+-wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+-_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+- _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+- $lt_tmp_static_flag,
+- [],
+- [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+-_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+- [Compiler flag to prevent dynamic linking])
+-])# _LT_COMPILER_PIC
+-
+-
+-# _LT_LINKER_SHLIBS([TAGNAME])
+-# ----------------------------
+-# See if the linker supports building shared libraries.
+-m4_defun([_LT_LINKER_SHLIBS],
+-[AC_REQUIRE([LT_PATH_LD])dnl
+-AC_REQUIRE([LT_PATH_NM])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_DECL_EGREP])dnl
+-m4_require([_LT_DECL_SED])dnl
+-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+-m4_require([_LT_TAG_COMPILER])dnl
+-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+-m4_if([$1], [CXX], [
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+- case $host_os in
+- aix[[4-9]]*)
+- # If we're using GNU nm, then we don't want the "-C" option.
+- # -C means demangle to AIX nm, but means don't demangle with GNU nm
+- if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+- else
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+- fi
+- ;;
+- pw32*)
+- _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+- ;;
+- cygwin* | mingw* | cegcc*)
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
+- *)
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
+- esac
+- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+-], [
+- runpath_var=
+- _LT_TAGVAR(allow_undefined_flag, $1)=
+- _LT_TAGVAR(always_export_symbols, $1)=no
+- _LT_TAGVAR(archive_cmds, $1)=
+- _LT_TAGVAR(archive_expsym_cmds, $1)=
+- _LT_TAGVAR(compiler_needs_object, $1)=no
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+- _LT_TAGVAR(hardcode_automatic, $1)=no
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=
+- _LT_TAGVAR(hardcode_minus_L, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+- _LT_TAGVAR(inherit_rpath, $1)=no
+- _LT_TAGVAR(link_all_deplibs, $1)=unknown
+- _LT_TAGVAR(module_cmds, $1)=
+- _LT_TAGVAR(module_expsym_cmds, $1)=
+- _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+- _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+- _LT_TAGVAR(thread_safe_flag_spec, $1)=
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=
+- # include_expsyms should be a list of space-separated symbols to be *always*
+- # included in the symbol list
+- _LT_TAGVAR(include_expsyms, $1)=
+- # exclude_expsyms can be an extended regexp of symbols to exclude
+- # it will be wrapped by ` (' and `)$', so one must not match beginning or
+- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+- # as well as any symbol that contains `d'.
+- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+- # platforms (ab)use it in PIC code, but their linkers get confused if
+- # the symbol is explicitly referenced. Since portable code cannot
+- # rely on this symbol name, it's probably fine to never include it in
+- # preloaded symbol tables.
+- # Exclude shared library initialization/finalization symbols.
+-dnl Note also adjust exclude_expsyms for C++ above.
+- extract_expsyms_cmds=
+-
+- case $host_os in
+- cygwin* | mingw* | pw32* | cegcc*)
+- # FIXME: the MSVC++ port hasn't been tested in a loooong time
+- # When not using gcc, we currently assume that we are using
+- # Microsoft Visual C++.
+- if test "$GCC" != yes; then
+- with_gnu_ld=no
+- fi
+- ;;
+- interix*)
+- # we just hope/assume this is gcc and not c89 (= MSVC++)
+- with_gnu_ld=yes
+- ;;
+- openbsd*)
+- with_gnu_ld=no
+- ;;
+- esac
+-
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- if test "$with_gnu_ld" = yes; then
+- # If archive_cmds runs LD, not CC, wlarc should be empty
+- wlarc='${wl}'
+-
+- # Set some defaults for GNU ld with shared library support. These
+- # are reset later if shared libraries are not supported. Putting them
+- # here allows them to be overridden if necessary.
+- runpath_var=LD_RUN_PATH
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- # ancient GNU ld didn't support --whole-archive et. al.
+- if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+- else
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=
+- fi
+- supports_anon_versioning=no
+- case `$LD -v 2>&1` in
+- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+- *\ 2.11.*) ;; # other 2.11 versions
+- *) supports_anon_versioning=yes ;;
+- esac
+-
+- # See if GNU ld supports shared libraries.
+- case $host_os in
+- aix[[3-9]]*)
+- # On AIX/PPC, the GNU linker is very broken
+- if test "$host_cpu" != ia64; then
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- cat <<_LT_EOF 1>&2
+-
+-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+-*** to be unable to reliably create shared libraries on AIX.
+-*** Therefore, libtool is disabling shared libraries support. If you
+-*** really care for shared libraries, you may want to modify your PATH
+-*** so that a non-GNU linker is found, and then restart.
+-
+-_LT_EOF
+- fi
+- ;;
+-
+- amigaos*)
+- case $host_cpu in
+- powerpc)
+- # see comment about AmigaOS4 .so support
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)=''
+- ;;
+- m68k)
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- ;;
+- esac
+- ;;
+-
+- beos*)
+- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+- # support --undefined. This deserves some investigation. FIXME
+- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+-
+- cygwin* | mingw* | pw32* | cegcc*)
+- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+- # as there is no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(always_export_symbols, $1)=no
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+-
+- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- # If the export-symbols file already is a .def file (1st line
+- # is EXPORTS), use it as is; otherwise, prepend...
+- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname.def;
+- else
+- echo EXPORTS > $output_objdir/$soname.def;
+- cat $export_symbols >> $output_objdir/$soname.def;
+- fi~
+- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+-
+- interix[[3-9]]*)
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+- # Instead, shared libraries are loaded at an image base (0x10000000 by
+- # default) and relocated if they conflict, which is a slow very memory
+- # consuming and fragmenting process. To avoid this, we pick a random,
+- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- ;;
+-
+- gnu* | linux* | tpf* | k*bsd*-gnu)
+- tmp_diet=no
+- if test "$host_os" = linux-dietlibc; then
+- case $cc_basename in
+- diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+- esac
+- fi
+- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+- && test "$tmp_diet" = no
+- then
+- tmp_addflag=
+- tmp_sharedflag='-shared'
+- case $cc_basename,$host_cpu in
+- pgcc*) # Portland Group C compiler
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- tmp_addflag=' $pic_flag'
+- ;;
+- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- tmp_addflag=' $pic_flag -Mnomain' ;;
+- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+- tmp_addflag=' -i_dynamic' ;;
+- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+- tmp_addflag=' -i_dynamic -nofor_main' ;;
+- ifc* | ifort*) # Intel Fortran compiler
+- tmp_addflag=' -nofor_main' ;;
+- lf95*) # Lahey Fortran 8.1
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=
+- tmp_sharedflag='--shared' ;;
+- xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+- tmp_sharedflag='-qmkshrobj'
+- tmp_addflag= ;;
+- esac
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*) # Sun C 5.9
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- _LT_TAGVAR(compiler_needs_object, $1)=yes
+- tmp_sharedflag='-G' ;;
+- *Sun\ F*) # Sun Fortran 8.3
+- tmp_sharedflag='-G' ;;
+- esac
+- _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+-
+- if test "x$supports_anon_versioning" = xyes; then
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+- echo "local: *; };" >> $output_objdir/$libname.ver~
+- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+- fi
+-
+- case $cc_basename in
+- xlf*)
+- # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+- if test "x$supports_anon_versioning" = xyes; then
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+- echo "local: *; };" >> $output_objdir/$libname.ver~
+- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+- fi
+- ;;
+- esac
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+-
+- netbsd*)
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+- wlarc=
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- fi
+- ;;
+-
+- solaris*)
+- if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- cat <<_LT_EOF 1>&2
+-
+-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+-*** create shared libraries on Solaris systems. Therefore, libtool
+-*** is disabling shared libraries support. We urge you to upgrade GNU
+-*** binutils to release 2.9.1 or newer. Another option is to modify
+-*** your PATH or compiler configuration so that the native linker is
+-*** used, and then restart.
+-
+-_LT_EOF
+- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+-
+- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+- case `$LD -v 2>&1` in
+- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- cat <<_LT_EOF 1>&2
+-
+-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+-*** reliably create shared libraries on SCO systems. Therefore, libtool
+-*** is disabling shared libraries support. We urge you to upgrade GNU
+-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+-*** your PATH or compiler configuration so that the native linker is
+-*** used, and then restart.
+-
+-_LT_EOF
+- ;;
+- *)
+- # For security reasons, it is highly recommended that you always
+- # use absolute paths for naming shared libraries, and exclude the
+- # DT_RUNPATH tag from executables and libraries. But doing so
+- # requires that you compile everything twice, which is a pain.
+- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
+-
+- sunos4*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- wlarc=
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- *)
+- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+-
+- if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+- runpath_var=
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=
+- fi
+- else
+- # PORTME fill in a description of your system's linker (not GNU ld)
+- case $host_os in
+- aix3*)
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(always_export_symbols, $1)=yes
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+- # Note: this linker hardcodes the directories in LIBPATH if there
+- # are no directories specified by -L.
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+- # Neither direct hardcoding nor static linking is supported with a
+- # broken collect2.
+- _LT_TAGVAR(hardcode_direct, $1)=unsupported
+- fi
+- ;;
+-
+- aix[[4-9]]*)
+- if test "$host_cpu" = ia64; then
+- # On IA64, the linker does run time linking by default, so we don't
+- # have to do anything special.
+- aix_use_runtimelinking=no
+- exp_sym_flag='-Bexport'
+- no_entry_flag=""
+- else
+- # If we're using GNU nm, then we don't want the "-C" option.
+- # -C means demangle to AIX nm, but means don't demangle with GNU nm
+- if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+- else
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+- fi
+- aix_use_runtimelinking=no
+-
+- # Test if we are trying to use run time linking or normal
+- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+- # need to do runtime linking.
+- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+- for ld_flag in $LDFLAGS; do
+- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+- aix_use_runtimelinking=yes
+- break
+- fi
+- done
+- ;;
+- esac
+-
+- exp_sym_flag='-bexport'
+- no_entry_flag='-bnoentry'
+- fi
+-
+- # When large executables or shared objects are built, AIX ld can
+- # have problems creating the table of contents. If linking a library
+- # or program results in "error TOC overflow" add -mminimal-toc to
+- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+-
+- _LT_TAGVAR(archive_cmds, $1)=''
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+-
+- if test "$GCC" = yes; then
+- case $host_os in aix4.[[012]]|aix4.[[012]].*)
+- # We only want to do this on AIX 4.2 and lower, the check
+- # below for broken collect2 doesn't work under 4.3+
+- collect2name=`${CC} -print-prog-name=collect2`
+- if test -f "$collect2name" &&
+- strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+- then
+- # We have reworked collect2
+- :
+- else
+- # We have old collect2
+- _LT_TAGVAR(hardcode_direct, $1)=unsupported
+- # It fails to find uninstalled libraries when the uninstalled
+- # path is not listed in the libpath. Setting hardcode_minus_L
+- # to unsupported forces relinking
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=
+- fi
+- ;;
+- esac
+- shared_flag='-shared'
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag="$shared_flag "'${wl}-G'
+- fi
+- else
+- # not using gcc
+- if test "$host_cpu" = ia64; then
+- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+- # chokes on -Wl,-G. The following line is correct:
+- shared_flag='-G'
+- else
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag='${wl}-G'
+- else
+- shared_flag='${wl}-bM:SRE'
+- fi
+- fi
+- fi
+-
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+- # It seems that -bexpall does not export symbols beginning with
+- # underscore (_), so it is better to generate a list of symbols to export.
+- _LT_TAGVAR(always_export_symbols, $1)=yes
+- if test "$aix_use_runtimelinking" = yes; then
+- # Warning - without using the other runtime loading flags (-brtl),
+- # -berok will link without error, but may produce a broken library.
+- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+- # Determine the default libpath from the value encoded in an
+- # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+- else
+- if test "$host_cpu" = ia64; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+- _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+- else
+- # Determine the default libpath from the value encoded in an
+- # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- # Warning - without using the other run time loading flags,
+- # -berok will link without error, but may produce a broken library.
+- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # Exported symbols can be pulled into shared objects from archives
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+- # This is similar to how AIX traditionally builds its shared libraries.
+- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+- fi
+- fi
+- ;;
+-
+- amigaos*)
+- case $host_cpu in
+- powerpc)
+- # see comment about AmigaOS4 .so support
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)=''
+- ;;
+- m68k)
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- ;;
+- esac
+- ;;
+-
+- bsdi[[45]]*)
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+- ;;
+-
+- cygwin* | mingw* | pw32* | cegcc*)
+- # When not using gcc, we currently assume that we are using
+- # Microsoft Visual C++.
+- # hardcode_libdir_flag_spec is actually meaningless, as there is
+- # no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Tell ltmain to make .lib files, not .a files.
+- libext=lib
+- # Tell ltmain to make .dll files, not .so files.
+- shrext_cmds=".dll"
+- # FIXME: Setting linknames here is a bad hack.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+- # The linker will automatically build a .lib file if we build a DLL.
+- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+- # FIXME: Should let the user specify the lib program.
+- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+- ;;
+-
+- darwin* | rhapsody*)
+- _LT_DARWIN_LINKER_FEATURES($1)
+- ;;
+-
+- dgux*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- freebsd1*)
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+-
+- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+- # support. Future versions do this automatically, but an explicit c++rt0.o
+- # does not break anything, and helps significantly (at the cost of a little
+- # extra space).
+- freebsd2.2*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+- freebsd2*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+- freebsd* | dragonfly*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- hpux9*)
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- fi
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+-
+- # hardcode_minus_L: Not really in the search PATH,
+- # but as the default location of the library.
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- ;;
+-
+- hpux10*)
+- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+- fi
+- if test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- # hardcode_minus_L: Not really in the search PATH,
+- # but as the default location of the library.
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- fi
+- ;;
+-
+- hpux11*)
+- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+- case $host_cpu in
+- hppa*64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
+- else
+- case $host_cpu in
+- hppa*64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
+- fi
+- if test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+-
+- case $host_cpu in
+- hppa*64*|ia64*)
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+- *)
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+-
+- # hardcode_minus_L: Not really in the search PATH,
+- # but as the default location of the library.
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- ;;
+- esac
+- fi
+- ;;
+-
+- irix5* | irix6* | nonstopux*)
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- # Try to use the -exported_symbol ld option, if it does not
+- # work, assume that -exports_file does not work either and
+- # implicitly export all symbols.
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+- AC_LINK_IFELSE(int foo(void) {},
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+- )
+- LDFLAGS="$save_LDFLAGS"
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+- fi
+- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(inherit_rpath, $1)=yes
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- ;;
+-
+- netbsd*)
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+- fi
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- newsos6)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- *nto* | *qnx*)
+- ;;
+-
+- openbsd*)
+- if test -f /usr/libexec/ld.so; then
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- else
+- case $host_os in
+- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- ;;
+- esac
+- fi
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+-
+- os2*)
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+- _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+- ;;
+-
+- osf3*)
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- else
+- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- fi
+- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- ;;
+-
+- osf4* | osf5*) # as osf3* with the addition of -msym flag
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- else
+- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+-
+- # Both c and cxx compiler support -rpath directly
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+- fi
+- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- ;;
+-
+- solaris*)
+- _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+- if test "$GCC" = yes; then
+- wlarc='${wl}'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+- else
+- case `$CC -V 2>&1` in
+- *"Compilers 5.0"*)
+- wlarc=''
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+- ;;
+- *)
+- wlarc='${wl}'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+- ;;
+- esac
+- fi
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- case $host_os in
+- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+- *)
+- # The compiler driver will combine and reorder linker options,
+- # but understands `-z linker_flag'. GCC discards it without `$wl',
+- # but is careful enough not to reorder.
+- # Supported since Solaris 2.6 (maybe 2.5.1?)
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+- else
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+- fi
+- ;;
+- esac
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- ;;
+-
+- sunos4*)
+- if test "x$host_vendor" = xsequent; then
+- # Use $CC to link under sequent, because it throws in some extra .o
+- # files that make .init and .fini sections work.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+- fi
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- sysv4)
+- case $host_vendor in
+- sni)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+- ;;
+- siemens)
+- ## LD is ld it makes a PLAMLIB
+- ## CC just makes a GrossModule.
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- ;;
+- motorola)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+- ;;
+- esac
+- runpath_var='LD_RUN_PATH'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- sysv4.3*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+- ;;
+-
+- sysv4*MP*)
+- if test -d /usr/nec; then
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- runpath_var=LD_RUN_PATH
+- hardcode_runpath_var=yes
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- fi
+- ;;
+-
+- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- runpath_var='LD_RUN_PATH'
+-
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- fi
+- ;;
+-
+- sysv5* | sco3.2v5* | sco5v6*)
+- # Note: We can NOT use -z defs as we might desire, because we do not
+- # link with -lc, and that would cause any symbols used from libc to
+- # always be unresolved, which means just about no library would
+- # ever link correctly. If we're not using GNU ld we use -z text
+- # though, which does catch some bad symbols but isn't as heavy-handed
+- # as -z defs.
+- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+- runpath_var='LD_RUN_PATH'
+-
+- if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- fi
+- ;;
+-
+- uts4*)
+- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+-
+- *)
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+-
+- if test x$host_vendor = xsni; then
+- case $host in
+- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+- ;;
+- esac
+- fi
+- fi
+-])
+-AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+-
+-_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+-
+-_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+-_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+-_LT_DECL([], [extract_expsyms_cmds], [2],
+- [The commands to extract the exported symbol list from a shared archive])
+-
+-#
+-# Do we need to explicitly link libc?
+-#
+-case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+-x|xyes)
+- # Assume -lc should be added
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+-
+- if test "$enable_shared" = yes && test "$GCC" = yes; then
+- case $_LT_TAGVAR(archive_cmds, $1) in
+- *'~'*)
+- # FIXME: we may have to deal with multi-command sequences.
+- ;;
+- '$CC '*)
+- # Test whether the compiler implicitly links with -lc since on some
+- # systems, -lgcc has to come before -lc. If gcc already passes -lc
+- # to ld, don't add -lc before -lgcc.
+- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+- $RM conftest*
+- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+-
+- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+- soname=conftest
+- lib=conftest
+- libobjs=conftest.$ac_objext
+- deplibs=
+- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+- pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+- compiler_flags=-v
+- linker_flags=-v
+- verstring=
+- output_objdir=.
+- libname=conftest
+- lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+- _LT_TAGVAR(allow_undefined_flag, $1)=
+- if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+- then
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- else
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+- fi
+- _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+- else
+- cat conftest.err 1>&5
+- fi
+- $RM conftest*
+- AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
+- ;;
+- esac
+- fi
+- ;;
+-esac
+-
+-_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+- [Whether or not to add -lc for building shared libraries])
+-_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+- [enable_shared_with_static_runtimes], [0],
+- [Whether or not to disallow shared libs when runtime libs are static])
+-_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+- [Compiler flag to allow reflexive dlopens])
+-_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+- [Compiler flag to generate shared objects directly from archives])
+-_LT_TAGDECL([], [compiler_needs_object], [1],
+- [Whether the compiler copes with passing no objects directly])
+-_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+- [Create an old-style archive from a shared archive])
+-_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+- [Create a temporary old-style archive to link instead of a shared archive])
+-_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+-_LT_TAGDECL([], [archive_expsym_cmds], [2])
+-_LT_TAGDECL([], [module_cmds], [2],
+- [Commands used to build a loadable module if different from building
+- a shared archive.])
+-_LT_TAGDECL([], [module_expsym_cmds], [2])
+-_LT_TAGDECL([], [with_gnu_ld], [1],
+- [Whether we are building with GNU ld or not])
+-_LT_TAGDECL([], [allow_undefined_flag], [1],
+- [Flag that allows shared libraries with undefined symbols to be built])
+-_LT_TAGDECL([], [no_undefined_flag], [1],
+- [Flag that enforces no undefined symbols])
+-_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+- [Flag to hardcode $libdir into a binary during linking.
+- This must work even if $libdir does not exist])
+-_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
+- [[If ld is used when linking, flag to hardcode $libdir into a binary
+- during linking. This must work even if $libdir does not exist]])
+-_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+- [Whether we need a single "-rpath" flag with a separated argument])
+-_LT_TAGDECL([], [hardcode_direct], [0],
+- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+- DIR into the resulting binary])
+-_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+- DIR into the resulting binary and the resulting library dependency is
+- "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+- library is relocated])
+-_LT_TAGDECL([], [hardcode_minus_L], [0],
+- [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+- into the resulting binary])
+-_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+- [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+- into the resulting binary])
+-_LT_TAGDECL([], [hardcode_automatic], [0],
+- [Set to "yes" if building a shared library automatically hardcodes DIR
+- into the library and all subsequent libraries and executables linked
+- against it])
+-_LT_TAGDECL([], [inherit_rpath], [0],
+- [Set to yes if linker adds runtime paths of dependent libraries
+- to runtime path list])
+-_LT_TAGDECL([], [link_all_deplibs], [0],
+- [Whether libtool must link a program against all its dependency libraries])
+-_LT_TAGDECL([], [fix_srcfile_path], [1],
+- [Fix the shell variable $srcfile for the compiler])
+-_LT_TAGDECL([], [always_export_symbols], [0],
+- [Set to "yes" if exported symbols are required])
+-_LT_TAGDECL([], [export_symbols_cmds], [2],
+- [The commands to list exported symbols])
+-_LT_TAGDECL([], [exclude_expsyms], [1],
+- [Symbols that should not be listed in the preloaded symbols])
+-_LT_TAGDECL([], [include_expsyms], [1],
+- [Symbols that must always be exported])
+-_LT_TAGDECL([], [prelink_cmds], [2],
+- [Commands necessary for linking programs (against libraries) with templates])
+-_LT_TAGDECL([], [file_list_spec], [1],
+- [Specify filename containing input files])
+-dnl FIXME: Not yet implemented
+-dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+-dnl [Compiler flag to generate thread safe objects])
+-])# _LT_LINKER_SHLIBS
+-
+-
+-# _LT_LANG_C_CONFIG([TAG])
+-# ------------------------
+-# Ensure that the configuration variables for a C compiler are suitably
+-# defined. These variables are subsequently used by _LT_CONFIG to write
+-# the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_C_CONFIG],
+-[m4_require([_LT_DECL_EGREP])dnl
+-lt_save_CC="$CC"
+-AC_LANG_PUSH(C)
+-
+-# Source file extension for C test sources.
+-ac_ext=c
+-
+-# Object file extension for compiled C test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
+-
+-# Code to be used in simple compile tests
+-lt_simple_compile_test_code="int some_variable = 0;"
+-
+-# Code to be used in simple link tests
+-lt_simple_link_test_code='int main(){return(0);}'
+-
+-_LT_TAG_COMPILER
+-# Save the default compiler, since it gets overwritten when the other
+-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+-compiler_DEFAULT=$CC
+-
+-# save warnings/boilerplate of simple test code
+-_LT_COMPILER_BOILERPLATE
+-_LT_LINKER_BOILERPLATE
+-
+-## CAVEAT EMPTOR:
+-## There is no encapsulation within the following macros, do not change
+-## the running order or otherwise move them around unless you know exactly
+-## what you are doing...
+-if test -n "$compiler"; then
+- _LT_COMPILER_NO_RTTI($1)
+- _LT_COMPILER_PIC($1)
+- _LT_COMPILER_C_O($1)
+- _LT_COMPILER_FILE_LOCKS($1)
+- _LT_LINKER_SHLIBS($1)
+- _LT_SYS_DYNAMIC_LINKER($1)
+- _LT_LINKER_HARDCODE_LIBPATH($1)
+- LT_SYS_DLOPEN_SELF
+- _LT_CMD_STRIPLIB
+-
+- # Report which library types will actually be built
+- AC_MSG_CHECKING([if libtool supports shared libraries])
+- AC_MSG_RESULT([$can_build_shared])
+-
+- AC_MSG_CHECKING([whether to build shared libraries])
+- test "$can_build_shared" = "no" && enable_shared=no
+-
+- # On AIX, shared libraries and static libraries use the same namespace, and
+- # are all built from PIC.
+- case $host_os in
+- aix3*)
+- test "$enable_shared" = yes && enable_static=no
+- if test -n "$RANLIB"; then
+- archive_cmds="$archive_cmds~\$RANLIB \$lib"
+- postinstall_cmds='$RANLIB $lib'
+- fi
+- ;;
+-
+- aix[[4-9]]*)
+- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+- test "$enable_shared" = yes && enable_static=no
+- fi
+- ;;
+- esac
+- AC_MSG_RESULT([$enable_shared])
+-
+- AC_MSG_CHECKING([whether to build static libraries])
+- # Make sure either enable_shared or enable_static is yes.
+- test "$enable_shared" = yes || enable_static=yes
+- AC_MSG_RESULT([$enable_static])
+-
+- _LT_CONFIG($1)
+-fi
+-AC_LANG_POP
+-CC="$lt_save_CC"
+-])# _LT_LANG_C_CONFIG
+-
+-
+-# _LT_PROG_CXX
+-# ------------
+-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+-# compiler, we have our own version here.
+-m4_defun([_LT_PROG_CXX],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+-AC_PROG_CXX
+-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+- (test "X$CXX" != "Xg++"))) ; then
+- AC_PROG_CXXCPP
+-else
+- _lt_caught_CXX_error=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_CXX
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_CXX], [])
+-
+-
+-# _LT_LANG_CXX_CONFIG([TAG])
+-# --------------------------
+-# Ensure that the configuration variables for a C++ compiler are suitably
+-# defined. These variables are subsequently used by _LT_CONFIG to write
+-# the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_CXX_CONFIG],
+-[AC_REQUIRE([_LT_PROG_CXX])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-m4_require([_LT_DECL_EGREP])dnl
+-
+-AC_LANG_PUSH(C++)
+-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+-_LT_TAGVAR(allow_undefined_flag, $1)=
+-_LT_TAGVAR(always_export_symbols, $1)=no
+-_LT_TAGVAR(archive_expsym_cmds, $1)=
+-_LT_TAGVAR(compiler_needs_object, $1)=no
+-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_direct, $1)=no
+-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+-_LT_TAGVAR(hardcode_libdir_separator, $1)=
+-_LT_TAGVAR(hardcode_minus_L, $1)=no
+-_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+-_LT_TAGVAR(hardcode_automatic, $1)=no
+-_LT_TAGVAR(inherit_rpath, $1)=no
+-_LT_TAGVAR(module_cmds, $1)=
+-_LT_TAGVAR(module_expsym_cmds, $1)=
+-_LT_TAGVAR(link_all_deplibs, $1)=unknown
+-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+-_LT_TAGVAR(no_undefined_flag, $1)=
+-_LT_TAGVAR(whole_archive_flag_spec, $1)=
+-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+-
+-# Source file extension for C++ test sources.
+-ac_ext=cpp
+-
+-# Object file extension for compiled C++ test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
+-
+-# No sense in running all these tests if we already determined that
+-# the CXX compiler isn't working. Some variables (like enable_shared)
+-# are currently assumed to apply to all compilers on this platform,
+-# and will be corrupted by setting them based on a non-working compiler.
+-if test "$_lt_caught_CXX_error" != yes; then
+- # Code to be used in simple compile tests
+- lt_simple_compile_test_code="int some_variable = 0;"
+-
+- # Code to be used in simple link tests
+- lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+-
+- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+- _LT_TAG_COMPILER
+-
+- # save warnings/boilerplate of simple test code
+- _LT_COMPILER_BOILERPLATE
+- _LT_LINKER_BOILERPLATE
+-
+- # Allow CC to be a program name with arguments.
+- lt_save_CC=$CC
+- lt_save_LD=$LD
+- lt_save_GCC=$GCC
+- GCC=$GXX
+- lt_save_with_gnu_ld=$with_gnu_ld
+- lt_save_path_LD=$lt_cv_path_LD
+- if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+- else
+- $as_unset lt_cv_prog_gnu_ld
+- fi
+- if test -n "${lt_cv_path_LDCXX+set}"; then
+- lt_cv_path_LD=$lt_cv_path_LDCXX
+- else
+- $as_unset lt_cv_path_LD
+- fi
+- test -z "${LDCXX+set}" || LD=$LDCXX
+- CC=${CXX-"c++"}
+- compiler=$CC
+- _LT_TAGVAR(compiler, $1)=$CC
+- _LT_CC_BASENAME([$compiler])
+-
+- if test -n "$compiler"; then
+- # We don't want -fno-exception when compiling C++ code, so set the
+- # no_builtin_flag separately
+- if test "$GXX" = yes; then
+- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+- else
+- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+- fi
+-
+- if test "$GXX" = yes; then
+- # Set up default GNU C++ configuration
+-
+- LT_PATH_LD
+-
+- # Check if GNU C++ uses GNU ld as the underlying linker, since the
+- # archiving commands below assume that GNU ld is being used.
+- if test "$with_gnu_ld" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+-
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+-
+- # If archive_cmds runs LD, not CC, wlarc should be empty
+- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+- # investigate it a little bit more. (MM)
+- wlarc='${wl}'
+-
+- # ancient GNU ld didn't support --whole-archive et. al.
+- if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+- $GREP 'no-whole-archive' > /dev/null; then
+- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+- else
+- _LT_TAGVAR(whole_archive_flag_spec, $1)=
+- fi
+- else
+- with_gnu_ld=no
+- wlarc=
+-
+- # A generic and very simple default shared library creation
+- # command for GNU C++ for the case where it uses the native
+- # linker, instead of GNU ld. If possible, this setting should
+- # overridden to take advantage of the native linker features on
+- # the platform it is being used on.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+- fi
+-
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+-
+- else
+- GXX=no
+- with_gnu_ld=no
+- wlarc=
+- fi
+-
+- # PORTME: fill in a description of your system's C++ link characteristics
+- AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- case $host_os in
+- aix3*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- aix[[4-9]]*)
+- if test "$host_cpu" = ia64; then
+- # On IA64, the linker does run time linking by default, so we don't
+- # have to do anything special.
+- aix_use_runtimelinking=no
+- exp_sym_flag='-Bexport'
+- no_entry_flag=""
+- else
+- aix_use_runtimelinking=no
+-
+- # Test if we are trying to use run time linking or normal
+- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+- # need to do runtime linking.
+- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+- for ld_flag in $LDFLAGS; do
+- case $ld_flag in
+- *-brtl*)
+- aix_use_runtimelinking=yes
+- break
+- ;;
+- esac
+- done
+- ;;
+- esac
+-
+- exp_sym_flag='-bexport'
+- no_entry_flag='-bnoentry'
+- fi
+-
+- # When large executables or shared objects are built, AIX ld can
+- # have problems creating the table of contents. If linking a library
+- # or program results in "error TOC overflow" add -mminimal-toc to
+- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+-
+- _LT_TAGVAR(archive_cmds, $1)=''
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+-
+- if test "$GXX" = yes; then
+- case $host_os in aix4.[[012]]|aix4.[[012]].*)
+- # We only want to do this on AIX 4.2 and lower, the check
+- # below for broken collect2 doesn't work under 4.3+
+- collect2name=`${CC} -print-prog-name=collect2`
+- if test -f "$collect2name" &&
+- strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+- then
+- # We have reworked collect2
+- :
+- else
+- # We have old collect2
+- _LT_TAGVAR(hardcode_direct, $1)=unsupported
+- # It fails to find uninstalled libraries when the uninstalled
+- # path is not listed in the libpath. Setting hardcode_minus_L
+- # to unsupported forces relinking
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=
+- fi
+- esac
+- shared_flag='-shared'
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag="$shared_flag "'${wl}-G'
+- fi
+- else
+- # not using gcc
+- if test "$host_cpu" = ia64; then
+- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+- # chokes on -Wl,-G. The following line is correct:
+- shared_flag='-G'
+- else
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag='${wl}-G'
+- else
+- shared_flag='${wl}-bM:SRE'
+- fi
+- fi
+- fi
+-
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+- # It seems that -bexpall does not export symbols beginning with
+- # underscore (_), so it is better to generate a list of symbols to
+- # export.
+- _LT_TAGVAR(always_export_symbols, $1)=yes
+- if test "$aix_use_runtimelinking" = yes; then
+- # Warning - without using the other runtime loading flags (-brtl),
+- # -berok will link without error, but may produce a broken library.
+- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+- # Determine the default libpath from the value encoded in an empty
+- # executable.
+- _LT_SYS_MODULE_PATH_AIX
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+-
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+- else
+- if test "$host_cpu" = ia64; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+- _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+- else
+- # Determine the default libpath from the value encoded in an
+- # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- # Warning - without using the other run time loading flags,
+- # -berok will link without error, but may produce a broken library.
+- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # Exported symbols can be pulled into shared objects from archives
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+- # This is similar to how AIX traditionally builds its shared
+- # libraries.
+- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+- fi
+- fi
+- ;;
+-
+- beos*)
+- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+- # support --undefined. This deserves some investigation. FIXME
+- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+-
+- chorus*)
+- case $cc_basename in
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+-
+- cygwin* | mingw* | pw32* | cegcc*)
+- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+- # as there is no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(always_export_symbols, $1)=no
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+-
+- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- # If the export-symbols file already is a .def file (1st line
+- # is EXPORTS), use it as is; otherwise, prepend...
+- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname.def;
+- else
+- echo EXPORTS > $output_objdir/$soname.def;
+- cat $export_symbols >> $output_objdir/$soname.def;
+- fi~
+- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- darwin* | rhapsody*)
+- _LT_DARWIN_LINKER_FEATURES($1)
+- ;;
+-
+- dgux*)
+- case $cc_basename in
+- ec++*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- ghcx*)
+- # Green Hills C++ Compiler
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+-
+- freebsd[[12]]*)
+- # C++ shared libraries reported to be fairly broken before
+- # switch to ELF
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+-
+- freebsd-elf*)
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- ;;
+-
+- freebsd* | dragonfly*)
+- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+- # conventions
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- ;;
+-
+- gnu*)
+- ;;
+-
+- hpux9*)
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+- # but as the default
+- # location of the library.
+-
+- case $cc_basename in
+- CC*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- aCC*)
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+- ;;
+- *)
+- if test "$GXX" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+- else
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
+-
+- hpux10*|hpux11*)
+- if test $with_gnu_ld = no; then
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+-
+- case $host_cpu in
+- hppa*64*|ia64*)
+- ;;
+- *)
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- ;;
+- esac
+- fi
+- case $host_cpu in
+- hppa*64*|ia64*)
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+- *)
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+- # but as the default
+- # location of the library.
+- ;;
+- esac
+-
+- case $cc_basename in
+- CC*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- aCC*)
+- case $host_cpu in
+- hppa*64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- esac
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+- ;;
+- *)
+- if test "$GXX" = yes; then
+- if test $with_gnu_ld = no; then
+- case $host_cpu in
+- hppa*64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- ;;
+- esac
+- fi
+- else
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
+-
+- interix[[3-9]]*)
+- _LT_TAGVAR(hardcode_direct, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+- # Instead, shared libraries are loaded at an image base (0x10000000 by
+- # default) and relocated if they conflict, which is a slow very memory
+- # consuming and fragmenting process. To avoid this, we pick a random,
+- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+- ;;
+- irix5* | irix6*)
+- case $cc_basename in
+- CC*)
+- # SGI C++
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+-
+- # Archives containing C++ object files must be created using
+- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+- # necessary to make sure instantiated templates are included
+- # in the archive.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+- ;;
+- *)
+- if test "$GXX" = yes; then
+- if test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+- fi
+- fi
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- ;;
+- esac
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+- _LT_TAGVAR(inherit_rpath, $1)=yes
+- ;;
+-
+- linux* | k*bsd*-gnu)
+- case $cc_basename in
+- KCC*)
+- # Kuck and Associates, Inc. (KAI) C++ Compiler
+-
+- # KCC will only create a shared library if the output file
+- # ends with ".so" (or ".sl" for HP-UX), so rename the library
+- # to its proper name (with version) after linking.
+- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+-
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+-
+- # Archives containing C++ object files must be created using
+- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+- ;;
+- icpc* | ecpc* )
+- # Intel C++
+- with_gnu_ld=yes
+- # version 8.0 and above of icpc choke on multiply defined symbols
+- # if we add $predep_objects and $postdep_objects, however 7.1 and
+- # earlier do not add the objects themselves.
+- case `$CC -V 2>&1` in
+- *"Version 7."*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- ;;
+- *) # Version 8.0 or newer
+- tmp_idyn=
+- case $host_cpu in
+- ia64*) tmp_idyn=' -i_dynamic';;
+- esac
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+- ;;
+- esac
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+- ;;
+- pgCC* | pgcpp*)
+- # Portland Group C++ compiler
+- case `$CC -V` in
+- *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+- _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+- rm -rf $tpldir~
+- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+- _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+- rm -rf $tpldir~
+- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+- $RANLIB $oldlib'
+- _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+- rm -rf $tpldir~
+- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+- rm -rf $tpldir~
+- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+- ;;
+- *) # Version 6 will use weak symbols
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+- ;;
+- esac
+-
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- ;;
+- cxx*)
+- # Compaq C++
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+-
+- runpath_var=LD_RUN_PATH
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+-
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+- ;;
+- xl*)
+- # IBM XL 8.0 on PPC, with GNU ld
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- if test "x$supports_anon_versioning" = xyes; then
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+- echo "local: *; };" >> $output_objdir/$libname.ver~
+- $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+- fi
+- ;;
+- *)
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C++ 5.9
+- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+- _LT_TAGVAR(compiler_needs_object, $1)=yes
+-
+- # Not sure whether something based on
+- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+- # would be better.
+- output_verbose_link_cmd='echo'
+-
+- # Archives containing C++ object files must be created using
+- # "CC -xar", where "CC" is the Sun C++ compiler. This is
+- # necessary to make sure instantiated templates are included
+- # in the archive.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+- ;;
+- esac
+- ;;
+- esac
+- ;;
+-
+- lynxos*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+-
+- m88k*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+-
+- mvs*)
+- case $cc_basename in
+- cxx*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+-
+- netbsd*)
+- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+- wlarc=
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- fi
+- # Workaround some broken pre-1.5 toolchains
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+- ;;
+-
+- *nto* | *qnx*)
+- _LT_TAGVAR(ld_shlibs, $1)=yes
+- ;;
+-
+- openbsd2*)
+- # C++ shared libraries are fairly broken
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+-
+- openbsd*)
+- if test -f /usr/libexec/ld.so; then
+- _LT_TAGVAR(hardcode_direct, $1)=yes
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+- fi
+- output_verbose_link_cmd=echo
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+-
+- osf3* | osf4* | osf5*)
+- case $cc_basename in
+- KCC*)
+- # Kuck and Associates, Inc. (KAI) C++ Compiler
+-
+- # KCC will only create a shared library if the output file
+- # ends with ".so" (or ".sl" for HP-UX), so rename the library
+- # to its proper name (with version) after linking.
+- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+-
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+-
+- # Archives containing C++ object files must be created using
+- # the KAI C++ compiler.
+- case $host in
+- osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+- *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+- esac
+- ;;
+- RCC*)
+- # Rational C++ 2.4.1
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- cxx*)
+- case $host in
+- osf3*)
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- ;;
+- *)
+- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+- echo "-hidden">> $lib.exp~
+- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+- $RM $lib.exp'
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+- ;;
+- esac
+-
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+-
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+- ;;
+- *)
+- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- case $host in
+- osf3*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+- ;;
+- esac
+-
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+-
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+-
+- else
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
+- esac
+- ;;
+-
+- psos*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+-
+- sunos4*)
+- case $cc_basename in
+- CC*)
+- # Sun C++ 4.x
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- lcc*)
+- # Lucid
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+-
+- solaris*)
+- case $cc_basename in
+- CC*)
+- # Sun C++ 4.2, 5.x and Centerline C++
+- _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+-
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- case $host_os in
+- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+- *)
+- # The compiler driver will combine and reorder linker options,
+- # but understands `-z linker_flag'.
+- # Supported since Solaris 2.6 (maybe 2.5.1?)
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+- ;;
+- esac
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+-
+- output_verbose_link_cmd='echo'
+-
+- # Archives containing C++ object files must be created using
+- # "CC -xar", where "CC" is the Sun C++ compiler. This is
+- # necessary to make sure instantiated templates are included
+- # in the archive.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+- ;;
+- gcx*)
+- # Green Hills C++ Compiler
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+-
+- # The C++ compiler must be used to create the archive.
+- _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+- ;;
+- *)
+- # GNU C++ compiler with Solaris linker
+- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+- if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+-
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+- else
+- # g++ 2.7 appears to require `-G' NOT `-shared' on this
+- # platform.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+-
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+- fi
+-
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+- case $host_os in
+- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+- *)
+- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+- ;;
+- esac
+- fi
+- ;;
+- esac
+- ;;
+-
+- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- runpath_var='LD_RUN_PATH'
+-
+- case $cc_basename in
+- CC*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
+- ;;
+-
+- sysv5* | sco3.2v5* | sco5v6*)
+- # Note: We can NOT use -z defs as we might desire, because we do not
+- # link with -lc, and that would cause any symbols used from libc to
+- # always be unresolved, which means just about no library would
+- # ever link correctly. If we're not using GNU ld we use -z text
+- # though, which does catch some bad symbols but isn't as heavy-handed
+- # as -z defs.
+- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+- _LT_TAGVAR(link_all_deplibs, $1)=yes
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+- runpath_var='LD_RUN_PATH'
+-
+- case $cc_basename in
+- CC*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+- ;;
+- esac
+- ;;
+-
+- tandem*)
+- case $cc_basename in
+- NCC*)
+- # NonStop-UX NCC 3.20
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+-
+- vxworks*)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+-
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+-
+- AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+- test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+-
+- _LT_TAGVAR(GCC, $1)="$GXX"
+- _LT_TAGVAR(LD, $1)="$LD"
+-
+- ## CAVEAT EMPTOR:
+- ## There is no encapsulation within the following macros, do not change
+- ## the running order or otherwise move them around unless you know exactly
+- ## what you are doing...
+- _LT_SYS_HIDDEN_LIBDEPS($1)
+- _LT_COMPILER_PIC($1)
+- _LT_COMPILER_C_O($1)
+- _LT_COMPILER_FILE_LOCKS($1)
+- _LT_LINKER_SHLIBS($1)
+- _LT_SYS_DYNAMIC_LINKER($1)
+- _LT_LINKER_HARDCODE_LIBPATH($1)
+-
+- _LT_CONFIG($1)
+- fi # test -n "$compiler"
+-
+- CC=$lt_save_CC
+- LDCXX=$LD
+- LD=$lt_save_LD
+- GCC=$lt_save_GCC
+- with_gnu_ld=$lt_save_with_gnu_ld
+- lt_cv_path_LDCXX=$lt_cv_path_LD
+- lt_cv_path_LD=$lt_save_path_LD
+- lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+- lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+-fi # test "$_lt_caught_CXX_error" != yes
+-
+-AC_LANG_POP
+-])# _LT_LANG_CXX_CONFIG
+-
+-
+-# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+-# ---------------------------------
+-# Figure out "hidden" library dependencies from verbose
+-# compiler output when linking a shared library.
+-# Parse the compiler output and extract the necessary
+-# objects, libraries and library flags.
+-m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+-# Dependencies to place before and after the object being linked:
+-_LT_TAGVAR(predep_objects, $1)=
+-_LT_TAGVAR(postdep_objects, $1)=
+-_LT_TAGVAR(predeps, $1)=
+-_LT_TAGVAR(postdeps, $1)=
+-_LT_TAGVAR(compiler_lib_search_path, $1)=
+-
+-dnl we can't use the lt_simple_compile_test_code here,
+-dnl because it contains code intended for an executable,
+-dnl not a library. It's possible we should let each
+-dnl tag define a new lt_????_link_test_code variable,
+-dnl but it's only used here...
+-m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+-int a;
+-void foo (void) { a = 0; }
+-_LT_EOF
+-], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+-class Foo
+-{
+-public:
+- Foo (void) { a = 0; }
+-private:
+- int a;
+-};
+-_LT_EOF
+-], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+- subroutine foo
+- implicit none
+- integer*4 a
+- a=0
+- return
+- end
+-_LT_EOF
+-], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+- subroutine foo
+- implicit none
+- integer a
+- a=0
+- return
+- end
+-_LT_EOF
+-], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+-public class foo {
+- private int a;
+- public void bar (void) {
+- a = 0;
+- }
+-};
+-_LT_EOF
+-])
+-dnl Parse the compiler output and extract the necessary
+-dnl objects, libraries and library flags.
+-if AC_TRY_EVAL(ac_compile); then
+- # Parse the compiler output and extract the necessary
+- # objects, libraries and library flags.
+-
+- # Sentinel used to keep track of whether or not we are before
+- # the conftest object file.
+- pre_test_object_deps_done=no
+-
+- for p in `eval "$output_verbose_link_cmd"`; do
+- case $p in
+-
+- -L* | -R* | -l*)
+- # Some compilers place space between "-{L,R}" and the path.
+- # Remove the space.
+- if test $p = "-L" ||
+- test $p = "-R"; then
+- prev=$p
+- continue
+- else
+- prev=
+- fi
+-
+- if test "$pre_test_object_deps_done" = no; then
+- case $p in
+- -L* | -R*)
+- # Internal compiler library paths should come after those
+- # provided the user. The postdeps already come after the
+- # user supplied libs so there is no need to process them.
+- if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+- _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+- else
+- _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+- fi
+- ;;
+- # The "-l" case would never come before the object being
+- # linked, so don't bother handling this case.
+- esac
+- else
+- if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+- _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+- else
+- _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+- fi
+- fi
+- ;;
+-
+- *.$objext)
+- # This assumes that the test object file only shows up
+- # once in the compiler output.
+- if test "$p" = "conftest.$objext"; then
+- pre_test_object_deps_done=yes
+- continue
+- fi
+-
+- if test "$pre_test_object_deps_done" = no; then
+- if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+- _LT_TAGVAR(predep_objects, $1)="$p"
+- else
+- _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+- fi
+- else
+- if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+- _LT_TAGVAR(postdep_objects, $1)="$p"
+- else
+- _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+- fi
+- fi
+- ;;
+-
+- *) ;; # Ignore the rest.
+-
+- esac
+- done
+-
+- # Clean up.
+- rm -f a.out a.exe
+-else
+- echo "libtool.m4: error: problem compiling $1 test program"
+-fi
+-
+-$RM -f confest.$objext
+-
+-# PORTME: override above test on systems where it is broken
+-m4_if([$1], [CXX],
+-[case $host_os in
+-interix[[3-9]]*)
+- # Interix 3.5 installs completely hosed .la files for C++, so rather than
+- # hack all around it, let's just trust "g++" to DTRT.
+- _LT_TAGVAR(predep_objects,$1)=
+- _LT_TAGVAR(postdep_objects,$1)=
+- _LT_TAGVAR(postdeps,$1)=
+- ;;
+-
+-linux*)
+- case `$CC -V 2>&1 | sed 5q` in
+- *Sun\ C*)
+- # Sun C++ 5.9
+-
+- # The more standards-conforming stlport4 library is
+- # incompatible with the Cstd library. Avoid specifying
+- # it if it's in CXXFLAGS. Ignore libCrun as
+- # -library=stlport4 depends on it.
+- case " $CXX $CXXFLAGS " in
+- *" -library=stlport4 "*)
+- solaris_use_stlport4=yes
+- ;;
+- esac
+-
+- if test "$solaris_use_stlport4" != yes; then
+- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+- fi
+- ;;
+- esac
+- ;;
+-
+-solaris*)
+- case $cc_basename in
+- CC*)
+- # The more standards-conforming stlport4 library is
+- # incompatible with the Cstd library. Avoid specifying
+- # it if it's in CXXFLAGS. Ignore libCrun as
+- # -library=stlport4 depends on it.
+- case " $CXX $CXXFLAGS " in
+- *" -library=stlport4 "*)
+- solaris_use_stlport4=yes
+- ;;
+- esac
+-
+- # Adding this requires a known-good setup of shared libraries for
+- # Sun compiler versions before 5.6, else PIC objects from an old
+- # archive will be linked into the output, leading to subtle bugs.
+- if test "$solaris_use_stlport4" != yes; then
+- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+- fi
+- ;;
+- esac
+- ;;
+-esac
+-])
+-
+-case " $_LT_TAGVAR(postdeps, $1) " in
+-*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+-esac
+- _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+-if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+-fi
+-_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+- [The directories searched by this compiler when creating a shared library])
+-_LT_TAGDECL([], [predep_objects], [1],
+- [Dependencies to place before and after the objects being linked to
+- create a shared library])
+-_LT_TAGDECL([], [postdep_objects], [1])
+-_LT_TAGDECL([], [predeps], [1])
+-_LT_TAGDECL([], [postdeps], [1])
+-_LT_TAGDECL([], [compiler_lib_search_path], [1],
+- [The library search path used internally by the compiler when linking
+- a shared library])
+-])# _LT_SYS_HIDDEN_LIBDEPS
+-
+-
+-# _LT_PROG_F77
+-# ------------
+-# Since AC_PROG_F77 is broken, in that it returns the empty string
+-# if there is no fortran compiler, we have our own version here.
+-m4_defun([_LT_PROG_F77],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+-AC_PROG_F77
+-if test -z "$F77" || test "X$F77" = "Xno"; then
+- _lt_disable_F77=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_F77
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_F77], [])
+-
+-
+-# _LT_LANG_F77_CONFIG([TAG])
+-# --------------------------
+-# Ensure that the configuration variables for a Fortran 77 compiler are
+-# suitably defined. These variables are subsequently used by _LT_CONFIG
+-# to write the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_F77_CONFIG],
+-[AC_REQUIRE([_LT_PROG_F77])dnl
+-AC_LANG_PUSH(Fortran 77)
+-
+-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+-_LT_TAGVAR(allow_undefined_flag, $1)=
+-_LT_TAGVAR(always_export_symbols, $1)=no
+-_LT_TAGVAR(archive_expsym_cmds, $1)=
+-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_direct, $1)=no
+-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+-_LT_TAGVAR(hardcode_libdir_separator, $1)=
+-_LT_TAGVAR(hardcode_minus_L, $1)=no
+-_LT_TAGVAR(hardcode_automatic, $1)=no
+-_LT_TAGVAR(inherit_rpath, $1)=no
+-_LT_TAGVAR(module_cmds, $1)=
+-_LT_TAGVAR(module_expsym_cmds, $1)=
+-_LT_TAGVAR(link_all_deplibs, $1)=unknown
+-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+-_LT_TAGVAR(no_undefined_flag, $1)=
+-_LT_TAGVAR(whole_archive_flag_spec, $1)=
+-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+-
+-# Source file extension for f77 test sources.
+-ac_ext=f
+-
+-# Object file extension for compiled f77 test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
+-
+-# No sense in running all these tests if we already determined that
+-# the F77 compiler isn't working. Some variables (like enable_shared)
+-# are currently assumed to apply to all compilers on this platform,
+-# and will be corrupted by setting them based on a non-working compiler.
+-if test "$_lt_disable_F77" != yes; then
+- # Code to be used in simple compile tests
+- lt_simple_compile_test_code="\
+- subroutine t
+- return
+- end
+-"
+-
+- # Code to be used in simple link tests
+- lt_simple_link_test_code="\
+- program t
+- end
+-"
+-
+- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+- _LT_TAG_COMPILER
+-
+- # save warnings/boilerplate of simple test code
+- _LT_COMPILER_BOILERPLATE
+- _LT_LINKER_BOILERPLATE
+-
+- # Allow CC to be a program name with arguments.
+- lt_save_CC="$CC"
+- lt_save_GCC=$GCC
+- CC=${F77-"f77"}
+- compiler=$CC
+- _LT_TAGVAR(compiler, $1)=$CC
+- _LT_CC_BASENAME([$compiler])
+- GCC=$G77
+- if test -n "$compiler"; then
+- AC_MSG_CHECKING([if libtool supports shared libraries])
+- AC_MSG_RESULT([$can_build_shared])
+-
+- AC_MSG_CHECKING([whether to build shared libraries])
+- test "$can_build_shared" = "no" && enable_shared=no
+-
+- # On AIX, shared libraries and static libraries use the same namespace, and
+- # are all built from PIC.
+- case $host_os in
+- aix3*)
+- test "$enable_shared" = yes && enable_static=no
+- if test -n "$RANLIB"; then
+- archive_cmds="$archive_cmds~\$RANLIB \$lib"
+- postinstall_cmds='$RANLIB $lib'
+- fi
+- ;;
+- aix[[4-9]]*)
+- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+- test "$enable_shared" = yes && enable_static=no
+- fi
+- ;;
+- esac
+- AC_MSG_RESULT([$enable_shared])
+-
+- AC_MSG_CHECKING([whether to build static libraries])
+- # Make sure either enable_shared or enable_static is yes.
+- test "$enable_shared" = yes || enable_static=yes
+- AC_MSG_RESULT([$enable_static])
+-
+- _LT_TAGVAR(GCC, $1)="$G77"
+- _LT_TAGVAR(LD, $1)="$LD"
+-
+- ## CAVEAT EMPTOR:
+- ## There is no encapsulation within the following macros, do not change
+- ## the running order or otherwise move them around unless you know exactly
+- ## what you are doing...
+- _LT_COMPILER_PIC($1)
+- _LT_COMPILER_C_O($1)
+- _LT_COMPILER_FILE_LOCKS($1)
+- _LT_LINKER_SHLIBS($1)
+- _LT_SYS_DYNAMIC_LINKER($1)
+- _LT_LINKER_HARDCODE_LIBPATH($1)
+-
+- _LT_CONFIG($1)
+- fi # test -n "$compiler"
+-
+- GCC=$lt_save_GCC
+- CC="$lt_save_CC"
+-fi # test "$_lt_disable_F77" != yes
+-
+-AC_LANG_POP
+-])# _LT_LANG_F77_CONFIG
+-
+-
+-# _LT_PROG_FC
+-# -----------
+-# Since AC_PROG_FC is broken, in that it returns the empty string
+-# if there is no fortran compiler, we have our own version here.
+-m4_defun([_LT_PROG_FC],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+-AC_PROG_FC
+-if test -z "$FC" || test "X$FC" = "Xno"; then
+- _lt_disable_FC=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_FC
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_FC], [])
+-
+-
+-# _LT_LANG_FC_CONFIG([TAG])
+-# -------------------------
+-# Ensure that the configuration variables for a Fortran compiler are
+-# suitably defined. These variables are subsequently used by _LT_CONFIG
+-# to write the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_FC_CONFIG],
+-[AC_REQUIRE([_LT_PROG_FC])dnl
+-AC_LANG_PUSH(Fortran)
+-
+-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+-_LT_TAGVAR(allow_undefined_flag, $1)=
+-_LT_TAGVAR(always_export_symbols, $1)=no
+-_LT_TAGVAR(archive_expsym_cmds, $1)=
+-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_direct, $1)=no
+-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+-_LT_TAGVAR(hardcode_libdir_separator, $1)=
+-_LT_TAGVAR(hardcode_minus_L, $1)=no
+-_LT_TAGVAR(hardcode_automatic, $1)=no
+-_LT_TAGVAR(inherit_rpath, $1)=no
+-_LT_TAGVAR(module_cmds, $1)=
+-_LT_TAGVAR(module_expsym_cmds, $1)=
+-_LT_TAGVAR(link_all_deplibs, $1)=unknown
+-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+-_LT_TAGVAR(no_undefined_flag, $1)=
+-_LT_TAGVAR(whole_archive_flag_spec, $1)=
+-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+-
+-# Source file extension for fc test sources.
+-ac_ext=${ac_fc_srcext-f}
+-
+-# Object file extension for compiled fc test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
+-
+-# No sense in running all these tests if we already determined that
+-# the FC compiler isn't working. Some variables (like enable_shared)
+-# are currently assumed to apply to all compilers on this platform,
+-# and will be corrupted by setting them based on a non-working compiler.
+-if test "$_lt_disable_FC" != yes; then
+- # Code to be used in simple compile tests
+- lt_simple_compile_test_code="\
+- subroutine t
+- return
+- end
+-"
+-
+- # Code to be used in simple link tests
+- lt_simple_link_test_code="\
+- program t
+- end
+-"
+-
+- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+- _LT_TAG_COMPILER
+-
+- # save warnings/boilerplate of simple test code
+- _LT_COMPILER_BOILERPLATE
+- _LT_LINKER_BOILERPLATE
+-
+- # Allow CC to be a program name with arguments.
+- lt_save_CC="$CC"
+- lt_save_GCC=$GCC
+- CC=${FC-"f95"}
+- compiler=$CC
+- GCC=$ac_cv_fc_compiler_gnu
+-
+- _LT_TAGVAR(compiler, $1)=$CC
+- _LT_CC_BASENAME([$compiler])
+-
+- if test -n "$compiler"; then
+- AC_MSG_CHECKING([if libtool supports shared libraries])
+- AC_MSG_RESULT([$can_build_shared])
+-
+- AC_MSG_CHECKING([whether to build shared libraries])
+- test "$can_build_shared" = "no" && enable_shared=no
+-
+- # On AIX, shared libraries and static libraries use the same namespace, and
+- # are all built from PIC.
+- case $host_os in
+- aix3*)
+- test "$enable_shared" = yes && enable_static=no
+- if test -n "$RANLIB"; then
+- archive_cmds="$archive_cmds~\$RANLIB \$lib"
+- postinstall_cmds='$RANLIB $lib'
+- fi
+- ;;
+- aix[[4-9]]*)
+- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+- test "$enable_shared" = yes && enable_static=no
+- fi
+- ;;
+- esac
+- AC_MSG_RESULT([$enable_shared])
+-
+- AC_MSG_CHECKING([whether to build static libraries])
+- # Make sure either enable_shared or enable_static is yes.
+- test "$enable_shared" = yes || enable_static=yes
+- AC_MSG_RESULT([$enable_static])
+-
+- _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+- _LT_TAGVAR(LD, $1)="$LD"
+-
+- ## CAVEAT EMPTOR:
+- ## There is no encapsulation within the following macros, do not change
+- ## the running order or otherwise move them around unless you know exactly
+- ## what you are doing...
+- _LT_SYS_HIDDEN_LIBDEPS($1)
+- _LT_COMPILER_PIC($1)
+- _LT_COMPILER_C_O($1)
+- _LT_COMPILER_FILE_LOCKS($1)
+- _LT_LINKER_SHLIBS($1)
+- _LT_SYS_DYNAMIC_LINKER($1)
+- _LT_LINKER_HARDCODE_LIBPATH($1)
+-
+- _LT_CONFIG($1)
+- fi # test -n "$compiler"
+-
+- GCC=$lt_save_GCC
+- CC="$lt_save_CC"
+-fi # test "$_lt_disable_FC" != yes
+-
+-AC_LANG_POP
+-])# _LT_LANG_FC_CONFIG
+-
+-
+-# _LT_LANG_GCJ_CONFIG([TAG])
+-# --------------------------
+-# Ensure that the configuration variables for the GNU Java Compiler compiler
+-# are suitably defined. These variables are subsequently used by _LT_CONFIG
+-# to write the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_GCJ_CONFIG],
+-[AC_REQUIRE([LT_PROG_GCJ])dnl
+-AC_LANG_SAVE
+-
+-# Source file extension for Java test sources.
+-ac_ext=java
+-
+-# Object file extension for compiled Java test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
+-
+-# Code to be used in simple compile tests
+-lt_simple_compile_test_code="class foo {}"
+-
+-# Code to be used in simple link tests
+-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+-
+-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+-_LT_TAG_COMPILER
+-
+-# save warnings/boilerplate of simple test code
+-_LT_COMPILER_BOILERPLATE
+-_LT_LINKER_BOILERPLATE
+-
+-# Allow CC to be a program name with arguments.
+-lt_save_CC="$CC"
+-lt_save_GCC=$GCC
+-GCC=yes
+-CC=${GCJ-"gcj"}
+-compiler=$CC
+-_LT_TAGVAR(compiler, $1)=$CC
+-_LT_TAGVAR(LD, $1)="$LD"
+-_LT_CC_BASENAME([$compiler])
+-
+-# GCJ did not exist at the time GCC didn't implicitly link libc in.
+-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+-
+-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+-
+-## CAVEAT EMPTOR:
+-## There is no encapsulation within the following macros, do not change
+-## the running order or otherwise move them around unless you know exactly
+-## what you are doing...
+-if test -n "$compiler"; then
+- _LT_COMPILER_NO_RTTI($1)
+- _LT_COMPILER_PIC($1)
+- _LT_COMPILER_C_O($1)
+- _LT_COMPILER_FILE_LOCKS($1)
+- _LT_LINKER_SHLIBS($1)
+- _LT_LINKER_HARDCODE_LIBPATH($1)
+-
+- _LT_CONFIG($1)
+-fi
+-
+-AC_LANG_RESTORE
+-
+-GCC=$lt_save_GCC
+-CC="$lt_save_CC"
+-])# _LT_LANG_GCJ_CONFIG
+-
+-
+-# _LT_LANG_RC_CONFIG([TAG])
+-# -------------------------
+-# Ensure that the configuration variables for the Windows resource compiler
+-# are suitably defined. These variables are subsequently used by _LT_CONFIG
+-# to write the compiler configuration to `libtool'.
+-m4_defun([_LT_LANG_RC_CONFIG],
+-[AC_REQUIRE([LT_PROG_RC])dnl
+-AC_LANG_SAVE
+-
+-# Source file extension for RC test sources.
+-ac_ext=rc
+-
+-# Object file extension for compiled RC test sources.
+-objext=o
+-_LT_TAGVAR(objext, $1)=$objext
+-
+-# Code to be used in simple compile tests
+-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+-
+-# Code to be used in simple link tests
+-lt_simple_link_test_code="$lt_simple_compile_test_code"
+-
+-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+-_LT_TAG_COMPILER
+-
+-# save warnings/boilerplate of simple test code
+-_LT_COMPILER_BOILERPLATE
+-_LT_LINKER_BOILERPLATE
+-
+-# Allow CC to be a program name with arguments.
+-lt_save_CC="$CC"
+-lt_save_GCC=$GCC
+-GCC=
+-CC=${RC-"windres"}
+-compiler=$CC
+-_LT_TAGVAR(compiler, $1)=$CC
+-_LT_CC_BASENAME([$compiler])
+-_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+-
+-if test -n "$compiler"; then
+- :
+- _LT_CONFIG($1)
+-fi
+-
+-GCC=$lt_save_GCC
+-AC_LANG_RESTORE
+-CC="$lt_save_CC"
+-])# _LT_LANG_RC_CONFIG
+-
+-
+-# LT_PROG_GCJ
+-# -----------
+-AC_DEFUN([LT_PROG_GCJ],
+-[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+- [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+- [AC_CHECK_TOOL(GCJ, gcj,)
+- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+- AC_SUBST(GCJFLAGS)])])[]dnl
+-])
+-
+-# Old name:
+-AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+-
+-
+-# LT_PROG_RC
+-# ----------
+-AC_DEFUN([LT_PROG_RC],
+-[AC_CHECK_TOOL(RC, windres,)
+-])
+-
+-# Old name:
+-AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([LT_AC_PROG_RC], [])
+-
+-
+-# _LT_DECL_EGREP
+-# --------------
+-# If we don't have a new enough Autoconf to choose the best grep
+-# available, choose the one first in the user's PATH.
+-m4_defun([_LT_DECL_EGREP],
+-[AC_REQUIRE([AC_PROG_EGREP])dnl
+-AC_REQUIRE([AC_PROG_FGREP])dnl
+-test -z "$GREP" && GREP=grep
+-_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+-_LT_DECL([], [EGREP], [1], [An ERE matcher])
+-_LT_DECL([], [FGREP], [1], [A literal string matcher])
+-dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+-AC_SUBST([GREP])
+-])
+-
+-
+-# _LT_DECL_OBJDUMP
+-# --------------
+-# If we don't have a new enough Autoconf to choose the best objdump
+-# available, choose the one first in the user's PATH.
+-m4_defun([_LT_DECL_OBJDUMP],
+-[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+-test -z "$OBJDUMP" && OBJDUMP=objdump
+-_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+-AC_SUBST([OBJDUMP])
+-])
+-
+-
+-# _LT_DECL_SED
+-# ------------
+-# Check for a fully-functional sed program, that truncates
+-# as few characters as possible. Prefer GNU sed if found.
+-m4_defun([_LT_DECL_SED],
+-[AC_PROG_SED
+-test -z "$SED" && SED=sed
+-Xsed="$SED -e 1s/^X//"
+-_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+-_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+- [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+-])# _LT_DECL_SED
+-
+-m4_ifndef([AC_PROG_SED], [
+-############################################################
+-# NOTE: This macro has been submitted for inclusion into #
+-# GNU Autoconf as AC_PROG_SED. When it is available in #
+-# a released version of Autoconf we should remove this #
+-# macro and use it instead. #
+-############################################################
+-
+-m4_defun([AC_PROG_SED],
+-[AC_MSG_CHECKING([for a sed that does not truncate output])
+-AC_CACHE_VAL(lt_cv_path_SED,
+-[# Loop through the user's path and test for sed and gsed.
+-# Then use that list of sed's as ones to test for truncation.
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+- IFS=$as_save_IFS
+- test -z "$as_dir" && as_dir=.
+- for lt_ac_prog in sed gsed; do
+- for ac_exec_ext in '' $ac_executable_extensions; do
+- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+- fi
+- done
+- done
+-done
+-IFS=$as_save_IFS
+-lt_ac_max=0
+-lt_ac_count=0
+-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+-# along with /bin/sed that truncates output.
+-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+- test ! -f $lt_ac_sed && continue
+- cat /dev/null > conftest.in
+- lt_ac_count=0
+- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+- # Check for GNU sed and select it if it is found.
+- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+- lt_cv_path_SED=$lt_ac_sed
+- break
+- fi
+- while true; do
+- cat conftest.in conftest.in >conftest.tmp
+- mv conftest.tmp conftest.in
+- cp conftest.in conftest.nl
+- echo >>conftest.nl
+- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+- cmp -s conftest.out conftest.nl || break
+- # 10000 chars as input seems more than enough
+- test $lt_ac_count -gt 10 && break
+- lt_ac_count=`expr $lt_ac_count + 1`
+- if test $lt_ac_count -gt $lt_ac_max; then
+- lt_ac_max=$lt_ac_count
+- lt_cv_path_SED=$lt_ac_sed
+- fi
+- done
+-done
+-])
+-SED=$lt_cv_path_SED
+-AC_SUBST([SED])
+-AC_MSG_RESULT([$SED])
+-])#AC_PROG_SED
+-])#m4_ifndef
+-
+-# Old name:
+-AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([LT_AC_PROG_SED], [])
+-
+-
+-# _LT_CHECK_SHELL_FEATURES
+-# ------------------------
+-# Find out whether the shell is Bourne or XSI compatible,
+-# or has some other useful features.
+-m4_defun([_LT_CHECK_SHELL_FEATURES],
+-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+-# Try some XSI features
+-xsi_shell=no
+-( _lt_dummy="a/b/c"
+- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+- = c,a/b,, \
+- && eval 'test $(( 1 + 1 )) -eq 2 \
+- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+- && xsi_shell=yes
+-AC_MSG_RESULT([$xsi_shell])
+-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+-
+-AC_MSG_CHECKING([whether the shell understands "+="])
+-lt_shell_append=no
+-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+- >/dev/null 2>&1 \
+- && lt_shell_append=yes
+-AC_MSG_RESULT([$lt_shell_append])
+-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+-
+-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+- lt_unset=unset
+-else
+- lt_unset=false
+-fi
+-_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+-
+-# test EBCDIC or ASCII
+-case `echo X|tr X '\101'` in
+- A) # ASCII based system
+- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+- lt_SP2NL='tr \040 \012'
+- lt_NL2SP='tr \015\012 \040\040'
+- ;;
+- *) # EBCDIC based system
+- lt_SP2NL='tr \100 \n'
+- lt_NL2SP='tr \r\n \100\100'
+- ;;
+-esac
+-_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+-_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+-])# _LT_CHECK_SHELL_FEATURES
+-
+-
+-# _LT_PROG_XSI_SHELLFNS
+-# ---------------------
+-# Bourne and XSI compatible variants of some useful shell functions.
+-m4_defun([_LT_PROG_XSI_SHELLFNS],
+-[case $xsi_shell in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_dirname_and_basename file append nondir_replacement
+-# perform func_basename and func_dirname in a single function
+-# call:
+-# dirname: Compute the dirname of FILE. If nonempty,
+-# add APPEND to the result, otherwise set result
+-# to NONDIR_REPLACEMENT.
+-# value returned in "$func_dirname_result"
+-# basename: Compute filename of FILE.
+-# value retuned in "$func_basename_result"
+-# Implementation must be kept synchronized with func_dirname
+-# and func_basename. For efficiency, we do not delegate to
+-# those functions but instead duplicate the functionality here.
+-func_dirname_and_basename ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-func_stripname ()
+-{
+- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+- # positional parameters, so assign one to ordinary parameter first.
+- func_stripname_result=${3}
+- func_stripname_result=${func_stripname_result#"${1}"}
+- func_stripname_result=${func_stripname_result%"${2}"}
+-}
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=${1%%=*}
+- func_opt_split_arg=${1#*=}
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+- case ${1} in
+- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+- *) func_lo2o_result=${1} ;;
+- esac
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=${1%.*}.lo
+-}
+-
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=$(( $[*] ))
+-}
+-
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=${#1}
+-}
+-
+-_LT_EOF
+- ;;
+- *) # Bourne compatible functions.
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- # Extract subdirectory from the argument.
+- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+- if test "X$func_dirname_result" = "X${1}"; then
+- func_dirname_result="${3}"
+- else
+- func_dirname_result="$func_dirname_result${2}"
+- fi
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+-}
+-
+-dnl func_dirname_and_basename
+-dnl A portable version of this function is already defined in general.m4sh
+-dnl so there is no need for it here.
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-# func_strip_suffix prefix name
+-func_stripname ()
+-{
+- case ${2} in
+- .*) func_stripname_result=`$ECHO "X${3}" \
+- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+- *) func_stripname_result=`$ECHO "X${3}" \
+- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+- esac
+-}
+-
+-# sed scripts:
+-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+-my_sed_long_arg='1s/^-[[^=]]*=//'
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+-}
+-
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=`expr "$[@]"`
+-}
+-
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+-}
+-
+-_LT_EOF
+-esac
+-
+-case $lt_shell_append in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$[1]+=\$[2]"
+-}
+-_LT_EOF
+- ;;
+- *)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$[1]=\$$[1]\$[2]"
+-}
+-
+-_LT_EOF
+- ;;
+- esac
+-])
+Index: libiconv-1.13.1/m4/ltoptions.m4
+===================================================================
+--- libiconv-1.13.1.orig/m4/ltoptions.m4
++++ /dev/null
+@@ -1,368 +0,0 @@
+-# Helper functions for option handling. -*- Autoconf -*-
+-#
+-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+-# Written by Gary V. Vaughan, 2004
+-#
+-# This file is free software; the Free Software Foundation gives
+-# unlimited permission to copy and/or distribute it, with or without
+-# modifications, as long as this notice is preserved.
+-
+-# serial 6 ltoptions.m4
+-
+-# This is to help aclocal find these macros, as it can't see m4_define.
+-AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+-
+-
+-# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+-# ------------------------------------------
+-m4_define([_LT_MANGLE_OPTION],
+-[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+-
+-
+-# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+-# ---------------------------------------
+-# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+-# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+-# saved as a flag.
+-m4_define([_LT_SET_OPTION],
+-[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+-m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+- _LT_MANGLE_DEFUN([$1], [$2]),
+- [m4_warning([Unknown $1 option `$2'])])[]dnl
+-])
+-
+-
+-# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+-# ------------------------------------------------------------
+-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+-m4_define([_LT_IF_OPTION],
+-[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+-
+-
+-# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+-# -------------------------------------------------------
+-# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+-# are set.
+-m4_define([_LT_UNLESS_OPTIONS],
+-[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+- [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+- [m4_define([$0_found])])])[]dnl
+-m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+-])[]dnl
+-])
+-
+-
+-# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+-# ----------------------------------------
+-# OPTION-LIST is a space-separated list of Libtool options associated
+-# with MACRO-NAME. If any OPTION has a matching handler declared with
+-# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+-# the unknown option and exit.
+-m4_defun([_LT_SET_OPTIONS],
+-[# Set options
+-m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+- [_LT_SET_OPTION([$1], _LT_Option)])
+-
+-m4_if([$1],[LT_INIT],[
+- dnl
+- dnl Simply set some default values (i.e off) if boolean options were not
+- dnl specified:
+- _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+- ])
+- _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+- ])
+- dnl
+- dnl If no reference was made to various pairs of opposing options, then
+- dnl we run the default mode handler for the pair. For example, if neither
+- dnl `shared' nor `disable-shared' was passed, we enable building of shared
+- dnl archives by default:
+- _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+- _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+- _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+- _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+- [_LT_ENABLE_FAST_INSTALL])
+- ])
+-])# _LT_SET_OPTIONS
+-
+-
+-## --------------------------------- ##
+-## Macros to handle LT_INIT options. ##
+-## --------------------------------- ##
+-
+-# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+-# -----------------------------------------
+-m4_define([_LT_MANGLE_DEFUN],
+-[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+-
+-
+-# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+-# -----------------------------------------------
+-m4_define([LT_OPTION_DEFINE],
+-[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+-])# LT_OPTION_DEFINE
+-
+-
+-# dlopen
+-# ------
+-LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+-])
+-
+-AU_DEFUN([AC_LIBTOOL_DLOPEN],
+-[_LT_SET_OPTION([LT_INIT], [dlopen])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you
+-put the `dlopen' option into LT_INIT's first parameter.])
+-])
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+-
+-
+-# win32-dll
+-# ---------
+-# Declare package support for building win32 dll's.
+-LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+-[enable_win32_dll=yes
+-
+-case $host in
+-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+- AC_CHECK_TOOL(AS, as, false)
+- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+- AC_CHECK_TOOL(OBJDUMP, objdump, false)
+- ;;
+-esac
+-
+-test -z "$AS" && AS=as
+-_LT_DECL([], [AS], [0], [Assembler program])dnl
+-
+-test -z "$DLLTOOL" && DLLTOOL=dlltool
+-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
+-
+-test -z "$OBJDUMP" && OBJDUMP=objdump
+-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+-])# win32-dll
+-
+-AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-_LT_SET_OPTION([LT_INIT], [win32-dll])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you
+-put the `win32-dll' option into LT_INIT's first parameter.])
+-])
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+-
+-
+-# _LT_ENABLE_SHARED([DEFAULT])
+-# ----------------------------
+-# implement the --enable-shared flag, and supports the `shared' and
+-# `disable-shared' LT_INIT options.
+-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+-m4_define([_LT_ENABLE_SHARED],
+-[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+-AC_ARG_ENABLE([shared],
+- [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+- [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+- [p=${PACKAGE-default}
+- case $enableval in
+- yes) enable_shared=yes ;;
+- no) enable_shared=no ;;
+- *)
+- enable_shared=no
+- # Look at the argument we got. We use all the common list separators.
+- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+- for pkg in $enableval; do
+- IFS="$lt_save_ifs"
+- if test "X$pkg" = "X$p"; then
+- enable_shared=yes
+- fi
+- done
+- IFS="$lt_save_ifs"
+- ;;
+- esac],
+- [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+-
+- _LT_DECL([build_libtool_libs], [enable_shared], [0],
+- [Whether or not to build shared libraries])
+-])# _LT_ENABLE_SHARED
+-
+-LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+-LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+-
+-# Old names:
+-AC_DEFUN([AC_ENABLE_SHARED],
+-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+-])
+-
+-AC_DEFUN([AC_DISABLE_SHARED],
+-[_LT_SET_OPTION([LT_INIT], [disable-shared])
+-])
+-
+-AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+-AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+-dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+-
+-
+-
+-# _LT_ENABLE_STATIC([DEFAULT])
+-# ----------------------------
+-# implement the --enable-static flag, and support the `static' and
+-# `disable-static' LT_INIT options.
+-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+-m4_define([_LT_ENABLE_STATIC],
+-[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+-AC_ARG_ENABLE([static],
+- [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+- [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+- [p=${PACKAGE-default}
+- case $enableval in
+- yes) enable_static=yes ;;
+- no) enable_static=no ;;
+- *)
+- enable_static=no
+- # Look at the argument we got. We use all the common list separators.
+- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+- for pkg in $enableval; do
+- IFS="$lt_save_ifs"
+- if test "X$pkg" = "X$p"; then
+- enable_static=yes
+- fi
+- done
+- IFS="$lt_save_ifs"
+- ;;
+- esac],
+- [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+-
+- _LT_DECL([build_old_libs], [enable_static], [0],
+- [Whether or not to build static libraries])
+-])# _LT_ENABLE_STATIC
+-
+-LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+-LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+-
+-# Old names:
+-AC_DEFUN([AC_ENABLE_STATIC],
+-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+-])
+-
+-AC_DEFUN([AC_DISABLE_STATIC],
+-[_LT_SET_OPTION([LT_INIT], [disable-static])
+-])
+-
+-AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+-AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+-dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+-
+-
+-
+-# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+-# ----------------------------------
+-# implement the --enable-fast-install flag, and support the `fast-install'
+-# and `disable-fast-install' LT_INIT options.
+-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+-m4_define([_LT_ENABLE_FAST_INSTALL],
+-[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+-AC_ARG_ENABLE([fast-install],
+- [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+- [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+- [p=${PACKAGE-default}
+- case $enableval in
+- yes) enable_fast_install=yes ;;
+- no) enable_fast_install=no ;;
+- *)
+- enable_fast_install=no
+- # Look at the argument we got. We use all the common list separators.
+- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+- for pkg in $enableval; do
+- IFS="$lt_save_ifs"
+- if test "X$pkg" = "X$p"; then
+- enable_fast_install=yes
+- fi
+- done
+- IFS="$lt_save_ifs"
+- ;;
+- esac],
+- [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+-
+-_LT_DECL([fast_install], [enable_fast_install], [0],
+- [Whether or not to optimize for fast installation])dnl
+-])# _LT_ENABLE_FAST_INSTALL
+-
+-LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+-LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+-
+-# Old names:
+-AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+-the `fast-install' option into LT_INIT's first parameter.])
+-])
+-
+-AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+-[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+-the `disable-fast-install' option into LT_INIT's first parameter.])
+-])
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+-dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+-
+-
+-# _LT_WITH_PIC([MODE])
+-# --------------------
+-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+-# LT_INIT options.
+-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+-m4_define([_LT_WITH_PIC],
+-[AC_ARG_WITH([pic],
+- [AS_HELP_STRING([--with-pic],
+- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+- [pic_mode="$withval"],
+- [pic_mode=default])
+-
+-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+-
+-_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+-])# _LT_WITH_PIC
+-
+-LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+-LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+-
+-# Old name:
+-AU_DEFUN([AC_LIBTOOL_PICMODE],
+-[_LT_SET_OPTION([LT_INIT], [pic-only])
+-AC_DIAGNOSE([obsolete],
+-[$0: Remove this warning and the call to _LT_SET_OPTION when you
+-put the `pic-only' option into LT_INIT's first parameter.])
+-])
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+-
+-## ----------------- ##
+-## LTDL_INIT Options ##
+-## ----------------- ##
+-
+-m4_define([_LTDL_MODE], [])
+-LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+- [m4_define([_LTDL_MODE], [nonrecursive])])
+-LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+- [m4_define([_LTDL_MODE], [recursive])])
+-LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+- [m4_define([_LTDL_MODE], [subproject])])
+-
+-m4_define([_LTDL_TYPE], [])
+-LT_OPTION_DEFINE([LTDL_INIT], [installable],
+- [m4_define([_LTDL_TYPE], [installable])])
+-LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+- [m4_define([_LTDL_TYPE], [convenience])])
+Index: libiconv-1.13.1/m4/ltsugar.m4
+===================================================================
+--- libiconv-1.13.1.orig/m4/ltsugar.m4
++++ /dev/null
+@@ -1,123 +0,0 @@
+-# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
+-#
+-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+-# Written by Gary V. Vaughan, 2004
+-#
+-# This file is free software; the Free Software Foundation gives
+-# unlimited permission to copy and/or distribute it, with or without
+-# modifications, as long as this notice is preserved.
+-
+-# serial 6 ltsugar.m4
+-
+-# This is to help aclocal find these macros, as it can't see m4_define.
+-AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+-
+-
+-# lt_join(SEP, ARG1, [ARG2...])
+-# -----------------------------
+-# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+-# associated separator.
+-# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+-# versions in m4sugar had bugs.
+-m4_define([lt_join],
+-[m4_if([$#], [1], [],
+- [$#], [2], [[$2]],
+- [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+-m4_define([_lt_join],
+-[m4_if([$#$2], [2], [],
+- [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+-
+-
+-# lt_car(LIST)
+-# lt_cdr(LIST)
+-# ------------
+-# Manipulate m4 lists.
+-# These macros are necessary as long as will still need to support
+-# Autoconf-2.59 which quotes differently.
+-m4_define([lt_car], [[$1]])
+-m4_define([lt_cdr],
+-[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+- [$#], 1, [],
+- [m4_dquote(m4_shift($@))])])
+-m4_define([lt_unquote], $1)
+-
+-
+-# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+-# ------------------------------------------
+-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+-# Note that neither SEPARATOR nor STRING are expanded; they are appended
+-# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+-# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+-# than defined and empty).
+-#
+-# This macro is needed until we can rely on Autoconf 2.62, since earlier
+-# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+-m4_define([lt_append],
+-[m4_define([$1],
+- m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+-
+-
+-
+-# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+-# ----------------------------------------------------------
+-# Produce a SEP delimited list of all paired combinations of elements of
+-# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
+-# has the form PREFIXmINFIXSUFFIXn.
+-# Needed until we can rely on m4_combine added in Autoconf 2.62.
+-m4_define([lt_combine],
+-[m4_if(m4_eval([$# > 3]), [1],
+- [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+-[[m4_foreach([_Lt_prefix], [$2],
+- [m4_foreach([_Lt_suffix],
+- ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+- [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+-
+-
+-# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+-# -----------------------------------------------------------------------
+-# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+-# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+-m4_define([lt_if_append_uniq],
+-[m4_ifdef([$1],
+- [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+- [lt_append([$1], [$2], [$3])$4],
+- [$5])],
+- [lt_append([$1], [$2], [$3])$4])])
+-
+-
+-# lt_dict_add(DICT, KEY, VALUE)
+-# -----------------------------
+-m4_define([lt_dict_add],
+-[m4_define([$1($2)], [$3])])
+-
+-
+-# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+-# --------------------------------------------
+-m4_define([lt_dict_add_subkey],
+-[m4_define([$1($2:$3)], [$4])])
+-
+-
+-# lt_dict_fetch(DICT, KEY, [SUBKEY])
+-# ----------------------------------
+-m4_define([lt_dict_fetch],
+-[m4_ifval([$3],
+- m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+- m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+-
+-
+-# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+-# -----------------------------------------------------------------
+-m4_define([lt_if_dict_fetch],
+-[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+- [$5],
+- [$6])])
+-
+-
+-# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+-# --------------------------------------------------------------
+-m4_define([lt_dict_filter],
+-[m4_if([$5], [], [],
+- [lt_join(m4_quote(m4_default([$4], [[, ]])),
+- lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+- [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+-])
+Index: libiconv-1.13.1/m4/ltversion.m4
+===================================================================
+--- libiconv-1.13.1.orig/m4/ltversion.m4
++++ /dev/null
+@@ -1,23 +0,0 @@
+-# ltversion.m4 -- version numbers -*- Autoconf -*-
+-#
+-# Copyright (C) 2004 Free Software Foundation, Inc.
+-# Written by Scott James Remnant, 2004
+-#
+-# This file is free software; the Free Software Foundation gives
+-# unlimited permission to copy and/or distribute it, with or without
+-# modifications, as long as this notice is preserved.
+-
+-# Generated from ltversion.in.
+-
+-# serial 3012 ltversion.m4
+-# This file is part of GNU Libtool
+-
+-m4_define([LT_PACKAGE_VERSION], [2.2.6])
+-m4_define([LT_PACKAGE_REVISION], [1.3012])
+-
+-AC_DEFUN([LTVERSION_VERSION],
+-[macro_version='2.2.6'
+-macro_revision='1.3012'
+-_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+-_LT_DECL(, macro_revision, 0)
+-])
+Index: libiconv-1.13.1/m4/lt~obsolete.m4
+===================================================================
+--- libiconv-1.13.1.orig/m4/lt~obsolete.m4
++++ /dev/null
+@@ -1,92 +0,0 @@
+-# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+-#
+-# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+-# Written by Scott James Remnant, 2004.
+-#
+-# This file is free software; the Free Software Foundation gives
+-# unlimited permission to copy and/or distribute it, with or without
+-# modifications, as long as this notice is preserved.
+-
+-# serial 4 lt~obsolete.m4
+-
+-# These exist entirely to fool aclocal when bootstrapping libtool.
+-#
+-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+-# which have later been changed to m4_define as they aren't part of the
+-# exported API, or moved to Autoconf or Automake where they belong.
+-#
+-# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
+-# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+-# using a macro with the same name in our local m4/libtool.m4 it'll
+-# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+-# and doesn't know about Autoconf macros at all.)
+-#
+-# So we provide this file, which has a silly filename so it's always
+-# included after everything else. This provides aclocal with the
+-# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+-# because those macros already exist, or will be overwritten later.
+-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+-#
+-# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+-# Yes, that means every name once taken will need to remain here until
+-# we give up compatibility with versions before 1.7, at which point
+-# we need to keep only those names which we still refer to.
+-
+-# This is to help aclocal find these macros, as it can't see m4_define.
+-AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+-
+-m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
+-m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+-m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
+-m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+-m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
+-m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
+-m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+-m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
+-m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
+-m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
+-m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+-m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+-m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+-m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+-m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+-m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
+-m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+-m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+-m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
+-m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
+-m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+-m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+-m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+-m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+-m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+-m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
+-m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
+-m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
+-m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+-m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+-m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
+-m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
+-m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+-m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+-m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
+-m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+-m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+-m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+-m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+-m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])])
+-m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+-m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+-m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+-m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
diff --git a/meta/recipes-support/libiconv/libiconv_1.13.1.bb b/meta/recipes-support/libiconv/libiconv_1.13.1.bb
index 026f530..ec985e9 100644
--- a/meta/recipes-support/libiconv/libiconv_1.13.1.bb
+++ b/meta/recipes-support/libiconv/libiconv_1.13.1.bb
@@ -11,7 +11,6 @@ LIC_FILES_CHKSUM = "file://COPYING.LIB;md5=9f604d8a4f8e74f4f5140845a21b6674 \
SRC_URI = "${GNU_MIRROR}/${BPN}/${BPN}-${PV}.tar.gz \
file://autoconf.patch \
- file://shared_preloadable_libiconv_linux.patch \
"
SRC_URI[md5sum] = "7ab33ebd26687c744a37264a330bbe9a"
--
1.7.4.1
^ permalink raw reply related [flat|nested] 9+ messages in thread