* LSB support?
@ 2012-03-15 8:18 Ni Qingliang
2012-03-15 16:25 ` Mark Hatle
0 siblings, 1 reply; 14+ messages in thread
From: Ni Qingliang @ 2012-03-15 8:18 UTC (permalink / raw)
To: openembedded-core
Hello, I'm working on custom lsb-base image using oe-core.
and when using the lsb script, found error:
lsb_start_daemon line 44: daemon command not found.
similar thing happend on lsb_log_message: failure and warning command
not found.
maybe these function should be defined in /etc/init.d/functions?
but there are not these function in this file (belongs to initscripts).
Any idea?
thanks!
--
Yi Qingliang
niqingliang@insigma.com.cn
https://niqingliang2003.wordpress.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: LSB support?
2012-03-15 8:18 LSB support? Ni Qingliang
@ 2012-03-15 16:25 ` Mark Hatle
2012-03-16 2:38 ` Ni Qingliang
2012-03-16 5:18 ` Ni Qingliang
0 siblings, 2 replies; 14+ messages in thread
From: Mark Hatle @ 2012-03-15 16:25 UTC (permalink / raw)
To: openembedded-core
On 3/15/12 3:18 AM, Ni Qingliang wrote:
> Hello, I'm working on custom lsb-base image using oe-core.
>
> and when using the lsb script, found error:
>
> lsb_start_daemon line 44: daemon command not found.
>
> similar thing happend on lsb_log_message: failure and warning command
> not found.
>
> maybe these function should be defined in /etc/init.d/functions?
>
> but there are not these function in this file (belongs to initscripts).
Did you enable the LSB distribution settings? Without this, various components
may not be available.
In Poky, there is a "poky-lsb" distribution type:
DISTRO = "poky-lsb"
DISTROOVERRIDES = "poky:linuxstdbase"
DISTRO_FEATURES_append = " pam largefile opengl"
PREFERRED_PROVIDER_virtual/libx11 = "libx11"
(as well as using the core-image-lsb and/or task-core-lsb components.)
If you've tried this and those items are still broken, let me know and I can
help investigate further. (One final note, only LSB 1.4 is currently supported.)
--Mark
> Any idea?
>
> thanks!
>
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: LSB support?
2012-03-15 16:25 ` Mark Hatle
@ 2012-03-16 2:38 ` Ni Qingliang
2012-03-16 5:18 ` Ni Qingliang
1 sibling, 0 replies; 14+ messages in thread
From: Ni Qingliang @ 2012-03-16 2:38 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
first, thanks your reply.
Because I can't use task-core-lsb on my device (flash space is not
enough), I have to make a custom lsb-base image (without
perl/python/graphics).
I have checked the "linuxstdbase", and it will change the configure
option of some packages.
Indeed, I think the daemon/failure/warning fuctions should be considered
in package lsb's RDEPENDS.
what I want to know is the rdepends or where is the
daemon/failure/warning.
thanks again.
On Fri, 2012-03-16 at 00:25 +0800, Mark Hatle wrote:
> On 3/15/12 3:18 AM, Ni Qingliang wrote:
> > Hello, I'm working on custom lsb-base image using oe-core.
> >
> > and when using the lsb script, found error:
> >
> > lsb_start_daemon line 44: daemon command not found.
> >
> > similar thing happend on lsb_log_message: failure and warning command
> > not found.
> >
> > maybe these function should be defined in /etc/init.d/functions?
> >
> > but there are not these function in this file (belongs to initscripts).
>
> Did you enable the LSB distribution settings? Without this, various components
> may not be available.
>
> In Poky, there is a "poky-lsb" distribution type:
>
> DISTRO = "poky-lsb"
> DISTROOVERRIDES = "poky:linuxstdbase"
>
> DISTRO_FEATURES_append = " pam largefile opengl"
> PREFERRED_PROVIDER_virtual/libx11 = "libx11"
>
> (as well as using the core-image-lsb and/or task-core-lsb components.)
>
> If you've tried this and those items are still broken, let me know and I can
> help investigate further. (One final note, only LSB 1.4 is currently supported.)
>
> --Mark
>
> > Any idea?
> >
> > thanks!
> >
> >
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
--
Yi Qingliang
niqingliang@insigma.com.cn
https://niqingliang2003.wordpress.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: LSB support?
2012-03-15 16:25 ` Mark Hatle
2012-03-16 2:38 ` Ni Qingliang
@ 2012-03-16 5:18 ` Ni Qingliang
2012-03-16 15:36 ` Mark Hatle
1 sibling, 1 reply; 14+ messages in thread
From: Ni Qingliang @ 2012-03-16 5:18 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
when building qemux86-64 arch core-image-lsb (distro is poky-lsb), I got
/usr/lib/../lib/libXrandr.so.2: undefined reference to
`memcpy@GLIBC_2.14' when 'do_compile' gconf 3.2.3.
the default eglibc is 2.13, why it needs 2.14?
On Fri, 2012-03-16 at 00:25 +0800, Mark Hatle wrote:
> On 3/15/12 3:18 AM, Ni Qingliang wrote:
> > Hello, I'm working on custom lsb-base image using oe-core.
> >
> > and when using the lsb script, found error:
> >
> > lsb_start_daemon line 44: daemon command not found.
> >
> > similar thing happend on lsb_log_message: failure and warning command
> > not found.
> >
> > maybe these function should be defined in /etc/init.d/functions?
> >
> > but there are not these function in this file (belongs to initscripts).
>
> Did you enable the LSB distribution settings? Without this, various components
> may not be available.
>
> In Poky, there is a "poky-lsb" distribution type:
>
> DISTRO = "poky-lsb"
> DISTROOVERRIDES = "poky:linuxstdbase"
>
> DISTRO_FEATURES_append = " pam largefile opengl"
> PREFERRED_PROVIDER_virtual/libx11 = "libx11"
>
> (as well as using the core-image-lsb and/or task-core-lsb components.)
>
> If you've tried this and those items are still broken, let me know and I can
> help investigate further. (One final note, only LSB 1.4 is currently supported.)
>
> --Mark
>
> > Any idea?
> >
> > thanks!
> >
> >
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
--
Yi Qingliang
niqingliang@insigma.com.cn
https://niqingliang2003.wordpress.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: LSB support?
2012-03-16 5:18 ` Ni Qingliang
@ 2012-03-16 15:36 ` Mark Hatle
2012-03-19 1:47 ` Ni Qingliang
2012-03-20 9:20 ` Ni Qingliang
0 siblings, 2 replies; 14+ messages in thread
From: Mark Hatle @ 2012-03-16 15:36 UTC (permalink / raw)
To: openembedded-core
On 3/16/12 12:18 AM, Ni Qingliang wrote:
> when building qemux86-64 arch core-image-lsb (distro is poky-lsb), I got
> /usr/lib/../lib/libXrandr.so.2: undefined reference to
> `memcpy@GLIBC_2.14' when 'do_compile' gconf 3.2.3.
>
> the default eglibc is 2.13, why it needs 2.14?
Without anything further, the only guess I can make is that either you aren't
using the version of glibc you think you are, it's gotten some host
contamination, an explicit reference was added to libXrandr (doubtful), or you
are using something that was built/cached from a previous build. (i.e. did you
build w/ eglibc 2.14/2.15 -- and then switch back to eglibc 2.13 for some reason?)
On 3/15/12 9:38 PM, Ni Qingliang wrote:
> first, thanks your reply.
>
> Because I can't use task-core-lsb on my device (flash space is not
> enough), I have to make a custom lsb-base image (without
> perl/python/graphics).
>
> I have checked the "linuxstdbase", and it will change the configure
> option of some packages.
>
> Indeed, I think the daemon/failure/warning fuctions should be considered
> in package lsb's RDEPENDS.
>
> what I want to know is the rdepends or where is the
> daemon/failure/warning.
It certainly looks like a component is missing somewhere in the shell scrips
that are provided by the LSB functions. I would assume that the
depends/provides is setup properly to point to whatever should be providing the
missing daemon, failure, warning commands. If it's not (or if by default -- non
lsb mode) they're not being built, it's a definite bug. You shouldn't be able
to build a non-functional systems.
Please file a defect on bugzilla.yoctoproject.org. I will attempt to
investigate it (or someone else can). Hopefully it's just as a simple as a
missing dependency.
--Mark
> On Fri, 2012-03-16 at 00:25 +0800, Mark Hatle wrote:
>> On 3/15/12 3:18 AM, Ni Qingliang wrote:
>>> Hello, I'm working on custom lsb-base image using oe-core.
>>>
>>> and when using the lsb script, found error:
>>>
>>> lsb_start_daemon line 44: daemon command not found.
>>>
>>> similar thing happend on lsb_log_message: failure and warning command
>>> not found.
>>>
>>> maybe these function should be defined in /etc/init.d/functions?
>>>
>>> but there are not these function in this file (belongs to initscripts).
>>
>> Did you enable the LSB distribution settings? Without this, various components
>> may not be available.
>>
>> In Poky, there is a "poky-lsb" distribution type:
>>
>> DISTRO = "poky-lsb"
>> DISTROOVERRIDES = "poky:linuxstdbase"
>>
>> DISTRO_FEATURES_append = " pam largefile opengl"
>> PREFERRED_PROVIDER_virtual/libx11 = "libx11"
>>
>> (as well as using the core-image-lsb and/or task-core-lsb components.)
>>
>> If you've tried this and those items are still broken, let me know and I can
>> help investigate further. (One final note, only LSB 1.4 is currently supported.)
>>
>> --Mark
>>
>>> Any idea?
>>>
>>> thanks!
>>>
>>>
>>
>>
>> _______________________________________________
>> Openembedded-core mailing list
>> Openembedded-core@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: LSB support?
2012-03-16 15:36 ` Mark Hatle
@ 2012-03-19 1:47 ` Ni Qingliang
2012-03-19 6:33 ` Ni Qingliang
` (2 more replies)
2012-03-20 9:20 ` Ni Qingliang
1 sibling, 3 replies; 14+ messages in thread
From: Ni Qingliang @ 2012-03-19 1:47 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
I have encountered a similar problem when do a clean building in another
VM (running archlinux).
after remove /usr//lib/libXrandr.so.2:
mv /usr/lib/../lib/libXrandr.so.2 /usr/lib/../lib/libXrandr.so.2.bak
I got a new error:
/usr/lib/../lib/libXext.so.6: undefined reference to `memcpy@GLIBC_2.14'
so IMO, it used the wrong lib path. following is the output section of
'do_compile', the key is '/usr/lib/../lib', maybe it should be
'<xxxdir>/usr/lib/../lib'.
output section:
Making all in gconf
make[2]: Entering directory
`/media/pangu/lsbt/tmp/work/x86_64-poky-linux/gconf-3.2.3-r8/GConf-3.2.3/gconf'
make all-am
make[3]: Entering directory
`/media/pangu/lsbt/tmp/work/x86_64-poky-linux/gconf-3.2.3-r8/GConf-3.2.3/gconf'
../x86_64-poky-linux-libtool --tag=CC --mode=link
x86_64-poky-linux-gcc -m64
--sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 -O2 -pipe -g
-feliminate-unused-debug-types -Wall -DGCONF_ENABLE_DEBUG=1 -Wl,-O1
-Wl,--hash-style=gnu -Wl,--as-needed -o gconf-sanity-check-2
gconf-sanity-check.o libgconf-2.la -pthread -Wl,--export-dynamic
-lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0
-lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype
-lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
-lxml2
x86_64-poky-linux-libtool: link: x86_64-poky-linux-gcc -m64
--sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 -O2 -pipe -g
-feliminate-unused-debug-types -Wall -DGCONF_ENABLE_DEBUG=1 -Wl,-O1
-Wl,--hash-style=gnu -Wl,--as-needed -o .libs/gconf-sanity-check-2
gconf-sanity-check.o -pthread
-Wl,--export-dynamic ./.libs/libgconf-2.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-glib-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgtk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libatk-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangocairo-1.0.so -L=/usr/lib /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangoft2-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libstdc++.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk_pixbuf-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgio-2.0.so -lresolv /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libcairo.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpixman-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpng12.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXrender.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libX11.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxcb.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXau.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXdmcp.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpango-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfontconfig.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfreetype.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libexpat.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgobject-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libffi.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgmodule-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgthread-2.0.so -lpthread /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libglib-2.0.so -lrt /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxml2.so -ldl -lz -lm -pthread -Wl,-rpath -Wl,/usr/lib/../lib
/usr/lib/../lib/libXext.so.6: undefined reference to `memcpy@GLIBC_2.14'
collect2: ld returned 1 exit status
make[3]: *** [gconf-sanity-check-2] Error 1
On Fri, 2012-03-16 at 23:36 +0800, Mark Hatle wrote:
> On 3/16/12 12:18 AM, Ni Qingliang wrote:
> > when building qemux86-64 arch core-image-lsb (distro is poky-lsb), I got
> > /usr/lib/../lib/libXrandr.so.2: undefined reference to
> > `memcpy@GLIBC_2.14' when 'do_compile' gconf 3.2.3.
> >
> > the default eglibc is 2.13, why it needs 2.14?
>
> Without anything further, the only guess I can make is that either you aren't
> using the version of glibc you think you are, it's gotten some host
> contamination, an explicit reference was added to libXrandr (doubtful), or you
> are using something that was built/cached from a previous build. (i.e. did you
> build w/ eglibc 2.14/2.15 -- and then switch back to eglibc 2.13 for some reason?)
>
> On 3/15/12 9:38 PM, Ni Qingliang wrote:
> > first, thanks your reply.
> >
> > Because I can't use task-core-lsb on my device (flash space is not
> > enough), I have to make a custom lsb-base image (without
> > perl/python/graphics).
> >
> > I have checked the "linuxstdbase", and it will change the configure
> > option of some packages.
> >
> > Indeed, I think the daemon/failure/warning fuctions should be considered
> > in package lsb's RDEPENDS.
> >
> > what I want to know is the rdepends or where is the
> > daemon/failure/warning.
>
> It certainly looks like a component is missing somewhere in the shell scrips
> that are provided by the LSB functions. I would assume that the
> depends/provides is setup properly to point to whatever should be providing the
> missing daemon, failure, warning commands. If it's not (or if by default -- non
> lsb mode) they're not being built, it's a definite bug. You shouldn't be able
> to build a non-functional systems.
>
> Please file a defect on bugzilla.yoctoproject.org. I will attempt to
> investigate it (or someone else can). Hopefully it's just as a simple as a
> missing dependency.
>
> --Mark
>
> > On Fri, 2012-03-16 at 00:25 +0800, Mark Hatle wrote:
> >> On 3/15/12 3:18 AM, Ni Qingliang wrote:
> >>> Hello, I'm working on custom lsb-base image using oe-core.
> >>>
> >>> and when using the lsb script, found error:
> >>>
> >>> lsb_start_daemon line 44: daemon command not found.
> >>>
> >>> similar thing happend on lsb_log_message: failure and warning command
> >>> not found.
> >>>
> >>> maybe these function should be defined in /etc/init.d/functions?
> >>>
> >>> but there are not these function in this file (belongs to initscripts).
> >>
> >> Did you enable the LSB distribution settings? Without this, various components
> >> may not be available.
> >>
> >> In Poky, there is a "poky-lsb" distribution type:
> >>
> >> DISTRO = "poky-lsb"
> >> DISTROOVERRIDES = "poky:linuxstdbase"
> >>
> >> DISTRO_FEATURES_append = " pam largefile opengl"
> >> PREFERRED_PROVIDER_virtual/libx11 = "libx11"
> >>
> >> (as well as using the core-image-lsb and/or task-core-lsb components.)
> >>
> >> If you've tried this and those items are still broken, let me know and I can
> >> help investigate further. (One final note, only LSB 1.4 is currently supported.)
> >>
> >> --Mark
> >>
> >>> Any idea?
> >>>
> >>> thanks!
> >>>
> >>>
> >>
> >>
> >> _______________________________________________
> >> Openembedded-core mailing list
> >> Openembedded-core@lists.openembedded.org
> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
--
Yi Qingliang
niqingliang@insigma.com.cn
https://niqingliang2003.wordpress.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: LSB support?
2012-03-19 1:47 ` Ni Qingliang
@ 2012-03-19 6:33 ` Ni Qingliang
2012-03-19 16:07 ` Mark Hatle
2012-03-20 2:56 ` Ni Qingliang
2 siblings, 0 replies; 14+ messages in thread
From: Ni Qingliang @ 2012-03-19 6:33 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
Is anybody there? Is the info enough?
On Mon, 2012-03-19 at 09:47 +0800, 倪庆亮 wrote:
> I have encountered a similar problem when do a clean building in another
> VM (running archlinux).
>
> after remove /usr//lib/libXrandr.so.2:
> mv /usr/lib/../lib/libXrandr.so.2 /usr/lib/../lib/libXrandr.so.2.bak
>
> I got a new error:
> /usr/lib/../lib/libXext.so.6: undefined reference to `memcpy@GLIBC_2.14'
>
> so IMO, it used the wrong lib path. following is the output section of
> 'do_compile', the key is '/usr/lib/../lib', maybe it should be
> '<xxxdir>/usr/lib/../lib'.
>
> output section:
> Making all in gconf
> make[2]: Entering directory
> `/media/pangu/lsbt/tmp/work/x86_64-poky-linux/gconf-3.2.3-r8/GConf-3.2.3/gconf'
> make all-am
> make[3]: Entering directory
> `/media/pangu/lsbt/tmp/work/x86_64-poky-linux/gconf-3.2.3-r8/GConf-3.2.3/gconf'
> ../x86_64-poky-linux-libtool --tag=CC --mode=link
> x86_64-poky-linux-gcc -m64
> --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 -O2 -pipe -g
> -feliminate-unused-debug-types -Wall -DGCONF_ENABLE_DEBUG=1 -Wl,-O1
> -Wl,--hash-style=gnu -Wl,--as-needed -o gconf-sanity-check-2
> gconf-sanity-check.o libgconf-2.la -pthread -Wl,--export-dynamic
> -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0
> -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype
> -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
> -lxml2
> x86_64-poky-linux-libtool: link: x86_64-poky-linux-gcc -m64
> --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 -O2 -pipe -g
> -feliminate-unused-debug-types -Wall -DGCONF_ENABLE_DEBUG=1 -Wl,-O1
> -Wl,--hash-style=gnu -Wl,--as-needed -o .libs/gconf-sanity-check-2
> gconf-sanity-check.o -pthread
> -Wl,--export-dynamic ./.libs/libgconf-2.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-glib-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgtk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libatk-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangocairo-1.0.so -L=/usr/lib /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangoft2-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libstdc++.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk_pixbuf-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgio-2.0.so -lresolv /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libcairo.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpixman-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpng12.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXrender.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libX11.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxcb.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXau.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXdmcp.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpango-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfontconfig.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfreetype.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libexpat.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgobject-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libffi.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgmodule-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgthread-2.0.so -lpthread /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libglib-2.0.so -lrt /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxml2.so -ldl -lz -lm -pthread -Wl,-rpath -Wl,/usr/lib/../lib
> /usr/lib/../lib/libXext.so.6: undefined reference to `memcpy@GLIBC_2.14'
> collect2: ld returned 1 exit status
> make[3]: *** [gconf-sanity-check-2] Error 1
>
> On Fri, 2012-03-16 at 23:36 +0800, Mark Hatle wrote:
> > On 3/16/12 12:18 AM, Ni Qingliang wrote:
> > > when building qemux86-64 arch core-image-lsb (distro is poky-lsb), I got
> > > /usr/lib/../lib/libXrandr.so.2: undefined reference to
> > > `memcpy@GLIBC_2.14' when 'do_compile' gconf 3.2.3.
> > >
> > > the default eglibc is 2.13, why it needs 2.14?
> >
> > Without anything further, the only guess I can make is that either you aren't
> > using the version of glibc you think you are, it's gotten some host
> > contamination, an explicit reference was added to libXrandr (doubtful), or you
> > are using something that was built/cached from a previous build. (i.e. did you
> > build w/ eglibc 2.14/2.15 -- and then switch back to eglibc 2.13 for some reason?)
> >
> > On 3/15/12 9:38 PM, Ni Qingliang wrote:
> > > first, thanks your reply.
> > >
> > > Because I can't use task-core-lsb on my device (flash space is not
> > > enough), I have to make a custom lsb-base image (without
> > > perl/python/graphics).
> > >
> > > I have checked the "linuxstdbase", and it will change the configure
> > > option of some packages.
> > >
> > > Indeed, I think the daemon/failure/warning fuctions should be considered
> > > in package lsb's RDEPENDS.
> > >
> > > what I want to know is the rdepends or where is the
> > > daemon/failure/warning.
> >
> > It certainly looks like a component is missing somewhere in the shell scrips
> > that are provided by the LSB functions. I would assume that the
> > depends/provides is setup properly to point to whatever should be providing the
> > missing daemon, failure, warning commands. If it's not (or if by default -- non
> > lsb mode) they're not being built, it's a definite bug. You shouldn't be able
> > to build a non-functional systems.
> >
> > Please file a defect on bugzilla.yoctoproject.org. I will attempt to
> > investigate it (or someone else can). Hopefully it's just as a simple as a
> > missing dependency.
> >
> > --Mark
> >
> > > On Fri, 2012-03-16 at 00:25 +0800, Mark Hatle wrote:
> > >> On 3/15/12 3:18 AM, Ni Qingliang wrote:
> > >>> Hello, I'm working on custom lsb-base image using oe-core.
> > >>>
> > >>> and when using the lsb script, found error:
> > >>>
> > >>> lsb_start_daemon line 44: daemon command not found.
> > >>>
> > >>> similar thing happend on lsb_log_message: failure and warning command
> > >>> not found.
> > >>>
> > >>> maybe these function should be defined in /etc/init.d/functions?
> > >>>
> > >>> but there are not these function in this file (belongs to initscripts).
> > >>
> > >> Did you enable the LSB distribution settings? Without this, various components
> > >> may not be available.
> > >>
> > >> In Poky, there is a "poky-lsb" distribution type:
> > >>
> > >> DISTRO = "poky-lsb"
> > >> DISTROOVERRIDES = "poky:linuxstdbase"
> > >>
> > >> DISTRO_FEATURES_append = " pam largefile opengl"
> > >> PREFERRED_PROVIDER_virtual/libx11 = "libx11"
> > >>
> > >> (as well as using the core-image-lsb and/or task-core-lsb components.)
> > >>
> > >> If you've tried this and those items are still broken, let me know and I can
> > >> help investigate further. (One final note, only LSB 1.4 is currently supported.)
> > >>
> > >> --Mark
> > >>
> > >>> Any idea?
> > >>>
> > >>> thanks!
> > >>>
> > >>>
> > >>
> > >>
> > >> _______________________________________________
> > >> Openembedded-core mailing list
> > >> Openembedded-core@lists.openembedded.org
> > >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> > >
> >
> >
> > _______________________________________________
> > Openembedded-core mailing list
> > Openembedded-core@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
> --
> Yi Qingliang
> niqingliang@insigma.com.cn
> https://niqingliang2003.wordpress.com
>
--
Yi Qingliang
niqingliang@insigma.com.cn
https://niqingliang2003.wordpress.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: LSB support?
2012-03-19 1:47 ` Ni Qingliang
2012-03-19 6:33 ` Ni Qingliang
@ 2012-03-19 16:07 ` Mark Hatle
2012-03-20 2:56 ` Ni Qingliang
2 siblings, 0 replies; 14+ messages in thread
From: Mark Hatle @ 2012-03-19 16:07 UTC (permalink / raw)
To: openembedded-core
On 3/18/12 8:47 PM, Ni Qingliang wrote:
> I have encountered a similar problem when do a clean building in another
> VM (running archlinux).
>
> after remove /usr//lib/libXrandr.so.2:
> mv /usr/lib/../lib/libXrandr.so.2 /usr/lib/../lib/libXrandr.so.2.bak
>
> I got a new error:
> /usr/lib/../lib/libXext.so.6: undefined reference to `memcpy@GLIBC_2.14'
>
> so IMO, it used the wrong lib path. following is the output section of
> 'do_compile', the key is '/usr/lib/../lib', maybe it should be
> '<xxxdir>/usr/lib/../lib'.
I don't see anything obvious in the code below. Search the build logs for
libXrandr, libXext for references to /usr/lib or similar.
Are you using the stock oe-core toolchain? If so there is a patch that detects
and attempts to poison (cause an error) usage of system directories while cross
compiling. If you are using your own toolchain, a vendor toolchain, or a
CS/Mentor toolchain.. then you may not have this patch and the system won't auto
detect that type of contamination.
Check the version of glibc on your host, is it 2.14 (or newer)? Then check the
version of eglibc in your build, I assume it's 2.13...
if the above is true, that would seem to indicate that it is likely host
contamination...
The other tool you can enable is "swabber", in your local.conf in the
"USER_CLASSES" you can enable "image-swab". Swabber can be a -very- slow
process, but is a good last resort for identifying host contamination.
It's been a while since I used swabber, and I don't remember how. I've been
looking and I'm having problems finding the documentation on setup and usage of
swabber. You may need to join and ask on the Yocto Project mailing list for
help on that.
--Mark
> output section:
> Making all in gconf
> make[2]: Entering directory
> `/media/pangu/lsbt/tmp/work/x86_64-poky-linux/gconf-3.2.3-r8/GConf-3.2.3/gconf'
> make all-am
> make[3]: Entering directory
> `/media/pangu/lsbt/tmp/work/x86_64-poky-linux/gconf-3.2.3-r8/GConf-3.2.3/gconf'
> ../x86_64-poky-linux-libtool --tag=CC --mode=link
> x86_64-poky-linux-gcc -m64
> --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 -O2 -pipe -g
> -feliminate-unused-debug-types -Wall -DGCONF_ENABLE_DEBUG=1 -Wl,-O1
> -Wl,--hash-style=gnu -Wl,--as-needed -o gconf-sanity-check-2
> gconf-sanity-check.o libgconf-2.la -pthread -Wl,--export-dynamic
> -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0
> -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype
> -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
> -lxml2
> x86_64-poky-linux-libtool: link: x86_64-poky-linux-gcc -m64
> --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 -O2 -pipe -g
> -feliminate-unused-debug-types -Wall -DGCONF_ENABLE_DEBUG=1 -Wl,-O1
> -Wl,--hash-style=gnu -Wl,--as-needed -o .libs/gconf-sanity-check-2
> gconf-sanity-check.o -pthread
> -Wl,--export-dynamic ./.libs/libgconf-2.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-glib-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgtk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libatk-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangocairo-1.0.so -L=/usr/lib /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangoft2-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libstdc++.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk_pixbuf-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgio-2.0.so -lresolv /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libcairo.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpixman-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpng12.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXren!
de!
> r.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libX11.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxcb.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXau.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXdmcp.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpango-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfontconfig.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfreetype.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libexpat.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgobject-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libffi.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgmodule-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgthread-2.0.so -lpthread /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libglib-2.0.so -lrt /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxml2.so -ldl -lz -lm -pthread -Wl,-rpath -Wl,/usr/lib/../lib
> /usr/lib/../lib/libXext.so.6: undefined reference to `memcpy@GLIBC_2.14'
> collect2: ld returned 1 exit status
> make[3]: *** [gconf-sanity-check-2] Error 1
>
> On Fri, 2012-03-16 at 23:36 +0800, Mark Hatle wrote:
>> On 3/16/12 12:18 AM, Ni Qingliang wrote:
>>> when building qemux86-64 arch core-image-lsb (distro is poky-lsb), I got
>>> /usr/lib/../lib/libXrandr.so.2: undefined reference to
>>> `memcpy@GLIBC_2.14' when 'do_compile' gconf 3.2.3.
>>>
>>> the default eglibc is 2.13, why it needs 2.14?
>>
>> Without anything further, the only guess I can make is that either you aren't
>> using the version of glibc you think you are, it's gotten some host
>> contamination, an explicit reference was added to libXrandr (doubtful), or you
>> are using something that was built/cached from a previous build. (i.e. did you
>> build w/ eglibc 2.14/2.15 -- and then switch back to eglibc 2.13 for some reason?)
>>
>> On 3/15/12 9:38 PM, Ni Qingliang wrote:
>> > first, thanks your reply.
>> >
>> > Because I can't use task-core-lsb on my device (flash space is not
>> > enough), I have to make a custom lsb-base image (without
>> > perl/python/graphics).
>> >
>> > I have checked the "linuxstdbase", and it will change the configure
>> > option of some packages.
>> >
>> > Indeed, I think the daemon/failure/warning fuctions should be considered
>> > in package lsb's RDEPENDS.
>> >
>> > what I want to know is the rdepends or where is the
>> > daemon/failure/warning.
>>
>> It certainly looks like a component is missing somewhere in the shell scrips
>> that are provided by the LSB functions. I would assume that the
>> depends/provides is setup properly to point to whatever should be providing the
>> missing daemon, failure, warning commands. If it's not (or if by default -- non
>> lsb mode) they're not being built, it's a definite bug. You shouldn't be able
>> to build a non-functional systems.
>>
>> Please file a defect on bugzilla.yoctoproject.org. I will attempt to
>> investigate it (or someone else can). Hopefully it's just as a simple as a
>> missing dependency.
>>
>> --Mark
>>
>>> On Fri, 2012-03-16 at 00:25 +0800, Mark Hatle wrote:
>>>> On 3/15/12 3:18 AM, Ni Qingliang wrote:
>>>>> Hello, I'm working on custom lsb-base image using oe-core.
>>>>>
>>>>> and when using the lsb script, found error:
>>>>>
>>>>> lsb_start_daemon line 44: daemon command not found.
>>>>>
>>>>> similar thing happend on lsb_log_message: failure and warning command
>>>>> not found.
>>>>>
>>>>> maybe these function should be defined in /etc/init.d/functions?
>>>>>
>>>>> but there are not these function in this file (belongs to initscripts).
>>>>
>>>> Did you enable the LSB distribution settings? Without this, various components
>>>> may not be available.
>>>>
>>>> In Poky, there is a "poky-lsb" distribution type:
>>>>
>>>> DISTRO = "poky-lsb"
>>>> DISTROOVERRIDES = "poky:linuxstdbase"
>>>>
>>>> DISTRO_FEATURES_append = " pam largefile opengl"
>>>> PREFERRED_PROVIDER_virtual/libx11 = "libx11"
>>>>
>>>> (as well as using the core-image-lsb and/or task-core-lsb components.)
>>>>
>>>> If you've tried this and those items are still broken, let me know and I can
>>>> help investigate further. (One final note, only LSB 1.4 is currently supported.)
>>>>
>>>> --Mark
>>>>
>>>>> Any idea?
>>>>>
>>>>> thanks!
>>>>>
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Openembedded-core mailing list
>>>> Openembedded-core@lists.openembedded.org
>>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>>>
>>
>>
>> _______________________________________________
>> Openembedded-core mailing list
>> Openembedded-core@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: LSB support?
2012-03-19 1:47 ` Ni Qingliang
2012-03-19 6:33 ` Ni Qingliang
2012-03-19 16:07 ` Mark Hatle
@ 2012-03-20 2:56 ` Ni Qingliang
2 siblings, 0 replies; 14+ messages in thread
From: Ni Qingliang @ 2012-03-20 2:56 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
no echo?
On Mon, 2012-03-19 at 09:47 +0800, 倪庆亮 wrote:
> I have encountered a similar problem when do a clean building in another
> VM (running archlinux).
>
> after remove /usr//lib/libXrandr.so.2:
> mv /usr/lib/../lib/libXrandr.so.2 /usr/lib/../lib/libXrandr.so.2.bak
>
> I got a new error:
> /usr/lib/../lib/libXext.so.6: undefined reference to `memcpy@GLIBC_2.14'
>
> so IMO, it used the wrong lib path. following is the output section of
> 'do_compile', the key is '/usr/lib/../lib', maybe it should be
> '<xxxdir>/usr/lib/../lib'.
>
> output section:
> Making all in gconf
> make[2]: Entering directory
> `/media/pangu/lsbt/tmp/work/x86_64-poky-linux/gconf-3.2.3-r8/GConf-3.2.3/gconf'
> make all-am
> make[3]: Entering directory
> `/media/pangu/lsbt/tmp/work/x86_64-poky-linux/gconf-3.2.3-r8/GConf-3.2.3/gconf'
> ../x86_64-poky-linux-libtool --tag=CC --mode=link
> x86_64-poky-linux-gcc -m64
> --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 -O2 -pipe -g
> -feliminate-unused-debug-types -Wall -DGCONF_ENABLE_DEBUG=1 -Wl,-O1
> -Wl,--hash-style=gnu -Wl,--as-needed -o gconf-sanity-check-2
> gconf-sanity-check.o libgconf-2.la -pthread -Wl,--export-dynamic
> -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0
> -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype
> -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
> -lxml2
> x86_64-poky-linux-libtool: link: x86_64-poky-linux-gcc -m64
> --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 -O2 -pipe -g
> -feliminate-unused-debug-types -Wall -DGCONF_ENABLE_DEBUG=1 -Wl,-O1
> -Wl,--hash-style=gnu -Wl,--as-needed -o .libs/gconf-sanity-check-2
> gconf-sanity-check.o -pthread
> -Wl,--export-dynamic ./.libs/libgconf-2.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-glib-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgtk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libatk-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangocairo-1.0.so -L=/usr/lib /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangoft2-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libstdc++.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk_pixbuf-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgio-2.0.so -lresolv /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libcairo.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpixman-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpng12.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXrender.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libX11.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxcb.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXau.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXdmcp.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpango-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfontconfig.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfreetype.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libexpat.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgobject-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libffi.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgmodule-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgthread-2.0.so -lpthread /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libglib-2.0.so -lrt /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxml2.so -ldl -lz -lm -pthread -Wl,-rpath -Wl,/usr/lib/../lib
> /usr/lib/../lib/libXext.so.6: undefined reference to `memcpy@GLIBC_2.14'
> collect2: ld returned 1 exit status
> make[3]: *** [gconf-sanity-check-2] Error 1
>
> On Fri, 2012-03-16 at 23:36 +0800, Mark Hatle wrote:
> > On 3/16/12 12:18 AM, Ni Qingliang wrote:
> > > when building qemux86-64 arch core-image-lsb (distro is poky-lsb), I got
> > > /usr/lib/../lib/libXrandr.so.2: undefined reference to
> > > `memcpy@GLIBC_2.14' when 'do_compile' gconf 3.2.3.
> > >
> > > the default eglibc is 2.13, why it needs 2.14?
> >
> > Without anything further, the only guess I can make is that either you aren't
> > using the version of glibc you think you are, it's gotten some host
> > contamination, an explicit reference was added to libXrandr (doubtful), or you
> > are using something that was built/cached from a previous build. (i.e. did you
> > build w/ eglibc 2.14/2.15 -- and then switch back to eglibc 2.13 for some reason?)
> >
> > On 3/15/12 9:38 PM, Ni Qingliang wrote:
> > > first, thanks your reply.
> > >
> > > Because I can't use task-core-lsb on my device (flash space is not
> > > enough), I have to make a custom lsb-base image (without
> > > perl/python/graphics).
> > >
> > > I have checked the "linuxstdbase", and it will change the configure
> > > option of some packages.
> > >
> > > Indeed, I think the daemon/failure/warning fuctions should be considered
> > > in package lsb's RDEPENDS.
> > >
> > > what I want to know is the rdepends or where is the
> > > daemon/failure/warning.
> >
> > It certainly looks like a component is missing somewhere in the shell scrips
> > that are provided by the LSB functions. I would assume that the
> > depends/provides is setup properly to point to whatever should be providing the
> > missing daemon, failure, warning commands. If it's not (or if by default -- non
> > lsb mode) they're not being built, it's a definite bug. You shouldn't be able
> > to build a non-functional systems.
> >
> > Please file a defect on bugzilla.yoctoproject.org. I will attempt to
> > investigate it (or someone else can). Hopefully it's just as a simple as a
> > missing dependency.
> >
> > --Mark
> >
> > > On Fri, 2012-03-16 at 00:25 +0800, Mark Hatle wrote:
> > >> On 3/15/12 3:18 AM, Ni Qingliang wrote:
> > >>> Hello, I'm working on custom lsb-base image using oe-core.
> > >>>
> > >>> and when using the lsb script, found error:
> > >>>
> > >>> lsb_start_daemon line 44: daemon command not found.
> > >>>
> > >>> similar thing happend on lsb_log_message: failure and warning command
> > >>> not found.
> > >>>
> > >>> maybe these function should be defined in /etc/init.d/functions?
> > >>>
> > >>> but there are not these function in this file (belongs to initscripts).
> > >>
> > >> Did you enable the LSB distribution settings? Without this, various components
> > >> may not be available.
> > >>
> > >> In Poky, there is a "poky-lsb" distribution type:
> > >>
> > >> DISTRO = "poky-lsb"
> > >> DISTROOVERRIDES = "poky:linuxstdbase"
> > >>
> > >> DISTRO_FEATURES_append = " pam largefile opengl"
> > >> PREFERRED_PROVIDER_virtual/libx11 = "libx11"
> > >>
> > >> (as well as using the core-image-lsb and/or task-core-lsb components.)
> > >>
> > >> If you've tried this and those items are still broken, let me know and I can
> > >> help investigate further. (One final note, only LSB 1.4 is currently supported.)
> > >>
> > >> --Mark
> > >>
> > >>> Any idea?
> > >>>
> > >>> thanks!
> > >>>
> > >>>
> > >>
> > >>
> > >> _______________________________________________
> > >> Openembedded-core mailing list
> > >> Openembedded-core@lists.openembedded.org
> > >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> > >
> >
> >
> > _______________________________________________
> > Openembedded-core mailing list
> > Openembedded-core@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
> --
> Yi Qingliang
> niqingliang@insigma.com.cn
> https://niqingliang2003.wordpress.com
>
--
Yi Qingliang
niqingliang@insigma.com.cn
https://niqingliang2003.wordpress.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: LSB support?
2012-03-16 15:36 ` Mark Hatle
2012-03-19 1:47 ` Ni Qingliang
@ 2012-03-20 9:20 ` Ni Qingliang
2012-03-21 8:45 ` gconf build error Ni Qingliang
1 sibling, 1 reply; 14+ messages in thread
From: Ni Qingliang @ 2012-03-20 9:20 UTC (permalink / raw)
To: mark.hatle; +Cc: openembedded-core
I do a clean building with the same error. I have not touched the
specific glibc version.
as I said, the do_compile should use the libXrandr in build_sysroot
directory, but it used it in host system. and I have checked that, there
IS the lib in build_sysroot directory.
you can build it successfully, only because your host's lib is using
glibc 2.13, but I'm using archlinux, all package is the newest.
the gconf used host's libXrandr, but want check its dependency in
build_sysroot, that is the reason, MAYBE.
I will do a clean building again, and I don't think it will change
anything.
On Fri, 2012-03-16 at 23:36 +0800, Mark Hatle wrote:
> On 3/16/12 12:18 AM, Ni Qingliang wrote:
> > when building qemux86-64 arch core-image-lsb (distro is poky-lsb), I got
> > /usr/lib/../lib/libXrandr.so.2: undefined reference to
> > `memcpy@GLIBC_2.14' when 'do_compile' gconf 3.2.3.
> >
> > the default eglibc is 2.13, why it needs 2.14?
>
> Without anything further, the only guess I can make is that either you aren't
> using the version of glibc you think you are, it's gotten some host
> contamination, an explicit reference was added to libXrandr (doubtful), or you
> are using something that was built/cached from a previous build. (i.e. did you
> build w/ eglibc 2.14/2.15 -- and then switch back to eglibc 2.13 for some reason?)
>
> On 3/15/12 9:38 PM, Ni Qingliang wrote:
> > first, thanks your reply.
> >
> > Because I can't use task-core-lsb on my device (flash space is not
> > enough), I have to make a custom lsb-base image (without
> > perl/python/graphics).
> >
> > I have checked the "linuxstdbase", and it will change the configure
> > option of some packages.
> >
> > Indeed, I think the daemon/failure/warning fuctions should be considered
> > in package lsb's RDEPENDS.
> >
> > what I want to know is the rdepends or where is the
> > daemon/failure/warning.
>
> It certainly looks like a component is missing somewhere in the shell scrips
> that are provided by the LSB functions. I would assume that the
> depends/provides is setup properly to point to whatever should be providing the
> missing daemon, failure, warning commands. If it's not (or if by default -- non
> lsb mode) they're not being built, it's a definite bug. You shouldn't be able
> to build a non-functional systems.
>
> Please file a defect on bugzilla.yoctoproject.org. I will attempt to
> investigate it (or someone else can). Hopefully it's just as a simple as a
> missing dependency.
>
> --Mark
>
> > On Fri, 2012-03-16 at 00:25 +0800, Mark Hatle wrote:
> >> On 3/15/12 3:18 AM, Ni Qingliang wrote:
> >>> Hello, I'm working on custom lsb-base image using oe-core.
> >>>
> >>> and when using the lsb script, found error:
> >>>
> >>> lsb_start_daemon line 44: daemon command not found.
> >>>
> >>> similar thing happend on lsb_log_message: failure and warning command
> >>> not found.
> >>>
> >>> maybe these function should be defined in /etc/init.d/functions?
> >>>
> >>> but there are not these function in this file (belongs to initscripts).
> >>
> >> Did you enable the LSB distribution settings? Without this, various components
> >> may not be available.
> >>
> >> In Poky, there is a "poky-lsb" distribution type:
> >>
> >> DISTRO = "poky-lsb"
> >> DISTROOVERRIDES = "poky:linuxstdbase"
> >>
> >> DISTRO_FEATURES_append = " pam largefile opengl"
> >> PREFERRED_PROVIDER_virtual/libx11 = "libx11"
> >>
> >> (as well as using the core-image-lsb and/or task-core-lsb components.)
> >>
> >> If you've tried this and those items are still broken, let me know and I can
> >> help investigate further. (One final note, only LSB 1.4 is currently supported.)
> >>
> >> --Mark
> >>
> >>> Any idea?
> >>>
> >>> thanks!
> >>>
> >>>
> >>
> >>
> >> _______________________________________________
> >> Openembedded-core mailing list
> >> Openembedded-core@lists.openembedded.org
> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
--
Yi Qingliang
niqingliang@insigma.com.cn
https://niqingliang2003.wordpress.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* gconf build error
2012-03-20 9:20 ` Ni Qingliang
@ 2012-03-21 8:45 ` Ni Qingliang
2012-03-23 8:32 ` Ni Qingliang
0 siblings, 1 reply; 14+ messages in thread
From: Ni Qingliang @ 2012-03-21 8:45 UTC (permalink / raw)
To: mark.hatle@windriver.com; +Cc: openembedded-core@lists.openembedded.org
I'm building core-image-lsb (qemux86-64 with poky-lsb), and got error
when do_compile gconf. my host is ArchLinux x86-64.
the error is occured when doing sanity-check, error like:
/usr/lib/../lib/libXrandr.so.2: undefined reference to
`memcpy@GLIBC_2.14'
the build dir is "/media/pangu/lsbt", following step can reproduce the
error, my question is: why the libtool try to link with the lib on host
rootfs? because I have tried to remove the host's libXrandr.so.2, then
the error changed to another lib, so I ensure it linked to the host lib
wrongly.
1.
cd /media/pangu/lsbt/tmp/work/x86_64-poky-linux/gconf-3.2.3-r8/GConf-3.2.3/gconf
2. export
PATH="/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/bin/x86_64-poky-linux:/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/bin/crossscripts:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/sbin:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/bin:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/sbin:/media/pangu/lsbt/tmp/sysroots/x86_64-linux//bin:/media/pangu/lsbt:/media/pangu/optimus/scripts:/media/pangu/optimus/bitbake/bin/:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/bin/core_perl:/media/pangu/optimus/scripts"
3. ../x86_64-poky-linux-libtool --tag=CC --mode=link
x86_64-poky-linux-gcc -m64
--sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 -O2 -pipe -g
-feliminate-unused-debug-types -Wall -DGCONF_ENABLE_DEBUG=1 -Wl,-O1
-Wl,--hash-style=gnu -Wl,--as-needed -o gconf-sanity-check-2
gconf-sanity-check.o libgconf-2.la -pthread -Wl,--export-dynamic
-lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0
-lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype
-lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
-lxml2
4. and then I can get the error, after add '-t -v' in the step 2, I got:
x86_64-poky-linux-libtool: link: x86_64-poky-linux-gcc -m64
--sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 -O2 -pipe -g
-feliminate-unused-debug-types -Wall -DGCONF_ENABLE_DEBUG=1 -Wl,-O1
-Wl,--hash-style=gnu -Wl,--as-needed -o .libs/gconf-sanity-check-2
gconf-sanity-check.o -pthread -Wl,--export-dynamic -t
-v ./.libs/libgconf-2.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-glib-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgtk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libatk-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangocairo-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangoft2-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libstdc++.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk_pixbuf-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgio-2.0.so -lresolv /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libcairo.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpixman-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpng12.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXrender.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libX11.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxcb.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXau.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXdmcp.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpango-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfontconfig.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfreetype.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libexpat.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgobject-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libffi.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgmodule-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgthread-2.0.so -lpthread /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libglib-2.0.so -lrt /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxml2.so -ldl -lz -lm -pthread -Wl,-rpath -Wl,/usr/lib/../lib
Using built-in specs.
COLLECT_GCC=x86_64-poky-linux-gcc
COLLECT_LTO_WRAPPER=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/lto-wrapper
Target: x86_64-poky-linux
Configured with: /media/pangu/lsbt/tmp/work-shared/gcc-4.6.3
+svnr184847-r23/gcc-4_6-branch/configure --build=x86_64-linux
--host=x86_64-linux --target=x86_64-poky-linux
--prefix=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr
--exec_prefix=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr
--bindir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/bin/x86_64-poky-linux --sbindir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/bin/x86_64-poky-linux --libexecdir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux --datadir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/share --sysconfdir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/etc --sharedstatedir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/com --localstatedir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/var --libdir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux --includedir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/include --oldincludedir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/include --infodir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/share/info --mandir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/media/pangu/lsbt/tmp/sysroots/x86_64-linux --with-gnu-ld --enable-shared --enable-languages=c,c++ --enable-threads=posix --disable-multilib --enable-c99 --enable-long-long --enable-symvers=gnu --enable-libstdcxx-pch --program-prefix=x86_64-poky-linux- --enable-target-optspace --enable-lto --enable-libssp --disable-bootstrap --disable-libgomp --disable-libmudflap --with-system-zlib --with-linker-hash-style=gnu --enable-cheaders=c_global --with-local-prefix=/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr --with-gxx-include-dir=/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/include/c++ --with-sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 --with-build-sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 --enable-poison-system-directories --with-headers=/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/include --disable-libunwind-exceptions --with-mpfr=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr --with-system-zlib --disable-nls --enable-__cxa_atexit
Thread model: posix
gcc version 4.6.4 20120303 (prerelease) (GCC)
COMPILER_PATH=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/
LIBRARY_PATH=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/../../../../../x86_64-poky-linux/lib/../lib/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/../lib/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/../../../../../x86_64-poky-linux/lib/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/
COLLECT_GCC_OPTIONS='--sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64' '-m64' '-O2' '-pipe' '-g' '-feliminate-unused-debug-types' '-Wall' '-D' 'GCONF_ENABLE_DEBUG=1' '-o' '.libs/gconf-sanity-check-2' '-pthread' '-t' '-v' '-pthread' '-mtune=generic' '-march=x86-64'
/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/collect2 --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib/ld-linux-x86-64.so.2 -o .libs/gconf-sanity-check-2 -t /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crt1.o /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crti.o /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/crtbegin.o -L/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4 -L/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/../../../../../x86_64-poky-linux/lib/../lib -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/../lib -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4 -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib -L/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/../../../../../x86_64-poky-linux/lib -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib -O1 --hash-style=gnu --as-needed gconf-sanity-check.o --export-dynamic ./.libs/libgconf-2.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-glib-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgtk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libatk-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangocairo-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangoft2-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libstdc++.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk_pixbuf-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgio-2.0.so -lresolv /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libcairo.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpixman-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpng12.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXrender.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libX11.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxcb.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXau.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXdmcp.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpango-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfontconfig.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfreetype.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libexpat.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgobject-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libffi.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgmodule-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgthread-2.0.so -lpthread /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libglib-2.0.so -lrt /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxml2.so -ldl -lz -lm -rpath /usr/lib/../lib -lgcc --as-needed -lgcc_s --no-as-needed -lpthread -lc -lgcc --as-needed -lgcc_s --no-as-needed /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/crtend.o /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crtn.o
/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/ld: mode elf_x86_64
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crt1.o
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crti.o
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/crtbegin.o
gconf-sanity-check.o
./.libs/libgconf-2.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-glib-1.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-1.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgtk-x11-2.0.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk-x11-2.0.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libatk-1.0.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangocairo-1.0.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangoft2-1.0.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libstdc++.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk_pixbuf-2.0.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgio-2.0.so
-lresolv
(/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libresolv.so)
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libcairo.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpixman-1.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpng12.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXrender.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libX11.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxcb.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXau.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXdmcp.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpango-1.0.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfontconfig.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfreetype.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libexpat.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgobject-2.0.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libffi.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgmodule-2.0.so
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgthread-2.0.so
/lib/libpthread.so.0
(/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/libpthread.so.0)
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libglib-2.0.so
-lrt (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/librt.so)
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxml2.so
-ldl (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libdl.so)
-lz (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libz.so)
-lm (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libm.so)
-lgcc_s
(/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/../lib/libgcc_s.so)
/lib/libpthread.so.0
(/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/libpthread.so.0)
/lib/libc.so.6 (/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/libc.so.6)
(/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libc_nonshared.a)elf-init.oS
/lib/ld-linux-x86-64.so.2
(/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/ld-linux-x86-64.so.2)
-lgcc_s
(/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/../lib/libgcc_s.so)
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/crtend.o
/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crtn.o
/usr/lib/../lib/libXrandr.so.2: undefined reference to
`memcpy@GLIBC_2.14'
/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/ld: link errors found, deleting executable `.libs/gconf-sanity-check-2'
collect2: ld returned 1 exit status
On Tue, 2012-03-20 at 17:20 +0800, 倪庆亮 wrote:
> I do a clean building with the same error. I have not touched the
> specific glibc version.
>
> as I said, the do_compile should use the libXrandr in build_sysroot
> directory, but it used it in host system. and I have checked that, there
> IS the lib in build_sysroot directory.
>
> you can build it successfully, only because your host's lib is using
> glibc 2.13, but I'm using archlinux, all package is the newest.
>
> the gconf used host's libXrandr, but want check its dependency in
> build_sysroot, that is the reason, MAYBE.
>
> I will do a clean building again, and I don't think it will change
> anything.
>
> On Fri, 2012-03-16 at 23:36 +0800, Mark Hatle wrote:
> > On 3/16/12 12:18 AM, Ni Qingliang wrote:
> > > when building qemux86-64 arch core-image-lsb (distro is poky-lsb), I got
> > > /usr/lib/../lib/libXrandr.so.2: undefined reference to
> > > `memcpy@GLIBC_2.14' when 'do_compile' gconf 3.2.3.
> > >
> > > the default eglibc is 2.13, why it needs 2.14?
> >
> > Without anything further, the only guess I can make is that either you aren't
> > using the version of glibc you think you are, it's gotten some host
> > contamination, an explicit reference was added to libXrandr (doubtful), or you
> > are using something that was built/cached from a previous build. (i.e. did you
> > build w/ eglibc 2.14/2.15 -- and then switch back to eglibc 2.13 for some reason?)
> >
> > On 3/15/12 9:38 PM, Ni Qingliang wrote:
> > > first, thanks your reply.
> > >
> > > Because I can't use task-core-lsb on my device (flash space is not
> > > enough), I have to make a custom lsb-base image (without
> > > perl/python/graphics).
> > >
> > > I have checked the "linuxstdbase", and it will change the configure
> > > option of some packages.
> > >
> > > Indeed, I think the daemon/failure/warning fuctions should be considered
> > > in package lsb's RDEPENDS.
> > >
> > > what I want to know is the rdepends or where is the
> > > daemon/failure/warning.
> >
> > It certainly looks like a component is missing somewhere in the shell scrips
> > that are provided by the LSB functions. I would assume that the
> > depends/provides is setup properly to point to whatever should be providing the
> > missing daemon, failure, warning commands. If it's not (or if by default -- non
> > lsb mode) they're not being built, it's a definite bug. You shouldn't be able
> > to build a non-functional systems.
> >
> > Please file a defect on bugzilla.yoctoproject.org. I will attempt to
> > investigate it (or someone else can). Hopefully it's just as a simple as a
> > missing dependency.
> >
> > --Mark
> >
> > > On Fri, 2012-03-16 at 00:25 +0800, Mark Hatle wrote:
> > >> On 3/15/12 3:18 AM, Ni Qingliang wrote:
> > >>> Hello, I'm working on custom lsb-base image using oe-core.
> > >>>
> > >>> and when using the lsb script, found error:
> > >>>
> > >>> lsb_start_daemon line 44: daemon command not found.
> > >>>
> > >>> similar thing happend on lsb_log_message: failure and warning command
> > >>> not found.
> > >>>
> > >>> maybe these function should be defined in /etc/init.d/functions?
> > >>>
> > >>> but there are not these function in this file (belongs to initscripts).
> > >>
> > >> Did you enable the LSB distribution settings? Without this, various components
> > >> may not be available.
> > >>
> > >> In Poky, there is a "poky-lsb" distribution type:
> > >>
> > >> DISTRO = "poky-lsb"
> > >> DISTROOVERRIDES = "poky:linuxstdbase"
> > >>
> > >> DISTRO_FEATURES_append = " pam largefile opengl"
> > >> PREFERRED_PROVIDER_virtual/libx11 = "libx11"
> > >>
> > >> (as well as using the core-image-lsb and/or task-core-lsb components.)
> > >>
> > >> If you've tried this and those items are still broken, let me know and I can
> > >> help investigate further. (One final note, only LSB 1.4 is currently supported.)
> > >>
> > >> --Mark
> > >>
> > >>> Any idea?
> > >>>
> > >>> thanks!
> > >>>
> > >>>
> > >>
> > >>
> > >> _______________________________________________
> > >> Openembedded-core mailing list
> > >> Openembedded-core@lists.openembedded.org
> > >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> > >
> >
> >
> > _______________________________________________
> > Openembedded-core mailing list
> > Openembedded-core@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
> --
> Yi Qingliang
> niqingliang@insigma.com.cn
> https://niqingliang2003.wordpress.com
>
--
Yi Qingliang
niqingliang@insigma.com.cn
https://niqingliang2003.wordpress.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: gconf build error
2012-03-21 8:45 ` gconf build error Ni Qingliang
@ 2012-03-23 8:32 ` Ni Qingliang
2012-03-23 9:30 ` Richard Purdie
2012-03-23 9:40 ` Ni Qingliang
0 siblings, 2 replies; 14+ messages in thread
From: Ni Qingliang @ 2012-03-23 8:32 UTC (permalink / raw)
To: mark.hatle@windriver.com; +Cc: openembedded-core
Hello,
I have made some progress after struggled a few days on it. found that
the reason is located in the 'ld'.
following is my investigation (focused on the IMPLICIT depended
library):
1. call ld with sysroot and rpath
$ld --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 ...
-rpath /usr/lib/../lib
then it will find the lib needed in the host's rootfs, that will result
error.
2. call ld with sysroot and without rpath
$ld --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 ...
then it will find the lib needed in the directory sysroot arg specified.
that is expected.
I found that using the --verbose argument. Is the behaviour expected? or
a bug?
On Wed, 2012-03-21 at 16:45 +0800, 倪庆亮 wrote:
> I'm building core-image-lsb (qemux86-64 with poky-lsb), and got error
> when do_compile gconf. my host is ArchLinux x86-64.
>
> the error is occured when doing sanity-check, error like:
> /usr/lib/../lib/libXrandr.so.2: undefined reference to
> `memcpy@GLIBC_2.14'
>
> the build dir is "/media/pangu/lsbt", following step can reproduce the
> error, my question is: why the libtool try to link with the lib on host
> rootfs? because I have tried to remove the host's libXrandr.so.2, then
> the error changed to another lib, so I ensure it linked to the host lib
> wrongly.
>
> 1.
> cd /media/pangu/lsbt/tmp/work/x86_64-poky-linux/gconf-3.2.3-r8/GConf-3.2.3/gconf
>
> 2. export
> PATH="/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/bin/x86_64-poky-linux:/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/bin/crossscripts:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/sbin:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/bin:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/sbin:/media/pangu/lsbt/tmp/sysroots/x86_64-linux//bin:/media/pangu/lsbt:/media/pangu/optimus/scripts:/media/pangu/optimus/bitbake/bin/:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/bin/core_perl:/media/pangu/optimus/scripts"
>
> 3. ../x86_64-poky-linux-libtool --tag=CC --mode=link
> x86_64-poky-linux-gcc -m64
> --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 -O2 -pipe -g
> -feliminate-unused-debug-types -Wall -DGCONF_ENABLE_DEBUG=1 -Wl,-O1
> -Wl,--hash-style=gnu -Wl,--as-needed -o gconf-sanity-check-2
> gconf-sanity-check.o libgconf-2.la -pthread -Wl,--export-dynamic
> -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0
> -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype
> -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
> -lxml2
>
>
> 4. and then I can get the error, after add '-t -v' in the step 2, I got:
> x86_64-poky-linux-libtool: link: x86_64-poky-linux-gcc -m64
> --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 -O2 -pipe -g
> -feliminate-unused-debug-types -Wall -DGCONF_ENABLE_DEBUG=1 -Wl,-O1
> -Wl,--hash-style=gnu -Wl,--as-needed -o .libs/gconf-sanity-check-2
> gconf-sanity-check.o -pthread -Wl,--export-dynamic -t
> -v ./.libs/libgconf-2.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-glib-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgtk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libatk-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangocairo-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangoft2-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libstdc++.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk_pixbuf-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgio-2.0.so -lresolv /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libcairo.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpixman-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpng12.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXrender.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libX11.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxcb.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXau.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXdmcp.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpango-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfontconfig.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfreetype.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libexpat.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgobject-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libffi.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgmodule-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgthread-2.0.so -lpthread /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libglib-2.0.so -lrt /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxml2.so -ldl -lz -lm -pthread -Wl,-rpath -Wl,/usr/lib/../lib
> Using built-in specs.
> COLLECT_GCC=x86_64-poky-linux-gcc
> COLLECT_LTO_WRAPPER=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/lto-wrapper
> Target: x86_64-poky-linux
> Configured with: /media/pangu/lsbt/tmp/work-shared/gcc-4.6.3
> +svnr184847-r23/gcc-4_6-branch/configure --build=x86_64-linux
> --host=x86_64-linux --target=x86_64-poky-linux
> --prefix=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr
> --exec_prefix=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr
> --bindir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/bin/x86_64-poky-linux --sbindir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/bin/x86_64-poky-linux --libexecdir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux --datadir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/share --sysconfdir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/etc --sharedstatedir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/com --localstatedir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/var --libdir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux --includedir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/include --oldincludedir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/include --infodir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/share/info --mandir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/media/pangu/lsbt/tmp/sysroots/x86_64-linux --with-gnu-ld --enable-shared --enable-languages=c,c++ --enable-threads=posix --disable-multilib --enable-c99 --enable-long-long --enable-symvers=gnu --enable-libstdcxx-pch --program-prefix=x86_64-poky-linux- --enable-target-optspace --enable-lto --enable-libssp --disable-bootstrap --disable-libgomp --disable-libmudflap --with-system-zlib --with-linker-hash-style=gnu --enable-cheaders=c_global --with-local-prefix=/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr --with-gxx-include-dir=/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/include/c++ --with-sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 --with-build-sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 --enable-poison-system-directories --with-headers=/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/include --disable-libunwind-exceptions --with-mpfr=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr --with-system-zlib --disable-nls --enable-__cxa_atexit
> Thread model: posix
> gcc version 4.6.4 20120303 (prerelease) (GCC)
> COMPILER_PATH=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/
> LIBRARY_PATH=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/../../../../../x86_64-poky-linux/lib/../lib/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/../lib/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/../../../../../x86_64-poky-linux/lib/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/
> COLLECT_GCC_OPTIONS='--sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64' '-m64' '-O2' '-pipe' '-g' '-feliminate-unused-debug-types' '-Wall' '-D' 'GCONF_ENABLE_DEBUG=1' '-o' '.libs/gconf-sanity-check-2' '-pthread' '-t' '-v' '-pthread' '-mtune=generic' '-march=x86-64'
> /media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/collect2 --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib/ld-linux-x86-64.so.2 -o .libs/gconf-sanity-check-2 -t /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crt1.o /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crti.o /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/crtbegin.o -L/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4 -L/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/../../../../../x86_64-poky-linux/lib/../lib -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/../lib -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4 -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib -L/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/../../../../../x86_64-poky-linux/lib -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib -O1 --hash-style=gnu --as-needed gconf-sanity-check.o --export-dynamic ./.libs/libgconf-2.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-glib-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgtk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libatk-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangocairo-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangoft2-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libstdc++.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk_pixbuf-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgio-2.0.so -lresolv /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libcairo.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpixman-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpng12.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXrender.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libX11.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxcb.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXau.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXdmcp.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpango-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfontconfig.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfreetype.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libexpat.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgobject-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libffi.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgmodule-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgthread-2.0.so -lpthread /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libglib-2.0.so -lrt /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxml2.so -ldl -lz -lm -rpath /usr/lib/../lib -lgcc --as-needed -lgcc_s --no-as-needed -lpthread -lc -lgcc --as-needed -lgcc_s --no-as-needed /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/crtend.o /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crtn.o
> /media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/ld: mode elf_x86_64
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crt1.o
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crti.o
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/crtbegin.o
> gconf-sanity-check.o
> ./.libs/libgconf-2.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-glib-1.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-1.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgtk-x11-2.0.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk-x11-2.0.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libatk-1.0.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangocairo-1.0.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangoft2-1.0.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libstdc++.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk_pixbuf-2.0.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgio-2.0.so
> -lresolv
> (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libresolv.so)
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libcairo.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpixman-1.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpng12.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXrender.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libX11.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxcb.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXau.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXdmcp.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpango-1.0.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfontconfig.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfreetype.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libexpat.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgobject-2.0.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libffi.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgmodule-2.0.so
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgthread-2.0.so
> /lib/libpthread.so.0
> (/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/libpthread.so.0)
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libglib-2.0.so
> -lrt (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/librt.so)
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxml2.so
> -ldl (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libdl.so)
> -lz (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libz.so)
> -lm (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libm.so)
> -lgcc_s
> (/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/../lib/libgcc_s.so)
> /lib/libpthread.so.0
> (/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/libpthread.so.0)
> /lib/libc.so.6 (/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/libc.so.6)
> (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libc_nonshared.a)elf-init.oS
> /lib/ld-linux-x86-64.so.2
> (/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/ld-linux-x86-64.so.2)
> -lgcc_s
> (/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/../lib/libgcc_s.so)
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/crtend.o
> /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crtn.o
> /usr/lib/../lib/libXrandr.so.2: undefined reference to
> `memcpy@GLIBC_2.14'
> /media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/ld: link errors found, deleting executable `.libs/gconf-sanity-check-2'
> collect2: ld returned 1 exit status
>
>
> On Tue, 2012-03-20 at 17:20 +0800, 倪庆亮 wrote:
> > I do a clean building with the same error. I have not touched the
> > specific glibc version.
> >
> > as I said, the do_compile should use the libXrandr in build_sysroot
> > directory, but it used it in host system. and I have checked that, there
> > IS the lib in build_sysroot directory.
> >
> > you can build it successfully, only because your host's lib is using
> > glibc 2.13, but I'm using archlinux, all package is the newest.
> >
> > the gconf used host's libXrandr, but want check its dependency in
> > build_sysroot, that is the reason, MAYBE.
> >
> > I will do a clean building again, and I don't think it will change
> > anything.
> >
> > On Fri, 2012-03-16 at 23:36 +0800, Mark Hatle wrote:
> > > On 3/16/12 12:18 AM, Ni Qingliang wrote:
> > > > when building qemux86-64 arch core-image-lsb (distro is poky-lsb), I got
> > > > /usr/lib/../lib/libXrandr.so.2: undefined reference to
> > > > `memcpy@GLIBC_2.14' when 'do_compile' gconf 3.2.3.
> > > >
> > > > the default eglibc is 2.13, why it needs 2.14?
> > >
> > > Without anything further, the only guess I can make is that either you aren't
> > > using the version of glibc you think you are, it's gotten some host
> > > contamination, an explicit reference was added to libXrandr (doubtful), or you
> > > are using something that was built/cached from a previous build. (i.e. did you
> > > build w/ eglibc 2.14/2.15 -- and then switch back to eglibc 2.13 for some reason?)
> > >
> > > On 3/15/12 9:38 PM, Ni Qingliang wrote:
> > > > first, thanks your reply.
> > > >
> > > > Because I can't use task-core-lsb on my device (flash space is not
> > > > enough), I have to make a custom lsb-base image (without
> > > > perl/python/graphics).
> > > >
> > > > I have checked the "linuxstdbase", and it will change the configure
> > > > option of some packages.
> > > >
> > > > Indeed, I think the daemon/failure/warning fuctions should be considered
> > > > in package lsb's RDEPENDS.
> > > >
> > > > what I want to know is the rdepends or where is the
> > > > daemon/failure/warning.
> > >
> > > It certainly looks like a component is missing somewhere in the shell scrips
> > > that are provided by the LSB functions. I would assume that the
> > > depends/provides is setup properly to point to whatever should be providing the
> > > missing daemon, failure, warning commands. If it's not (or if by default -- non
> > > lsb mode) they're not being built, it's a definite bug. You shouldn't be able
> > > to build a non-functional systems.
> > >
> > > Please file a defect on bugzilla.yoctoproject.org. I will attempt to
> > > investigate it (or someone else can). Hopefully it's just as a simple as a
> > > missing dependency.
> > >
> > > --Mark
> > >
> > > > On Fri, 2012-03-16 at 00:25 +0800, Mark Hatle wrote:
> > > >> On 3/15/12 3:18 AM, Ni Qingliang wrote:
> > > >>> Hello, I'm working on custom lsb-base image using oe-core.
> > > >>>
> > > >>> and when using the lsb script, found error:
> > > >>>
> > > >>> lsb_start_daemon line 44: daemon command not found.
> > > >>>
> > > >>> similar thing happend on lsb_log_message: failure and warning command
> > > >>> not found.
> > > >>>
> > > >>> maybe these function should be defined in /etc/init.d/functions?
> > > >>>
> > > >>> but there are not these function in this file (belongs to initscripts).
> > > >>
> > > >> Did you enable the LSB distribution settings? Without this, various components
> > > >> may not be available.
> > > >>
> > > >> In Poky, there is a "poky-lsb" distribution type:
> > > >>
> > > >> DISTRO = "poky-lsb"
> > > >> DISTROOVERRIDES = "poky:linuxstdbase"
> > > >>
> > > >> DISTRO_FEATURES_append = " pam largefile opengl"
> > > >> PREFERRED_PROVIDER_virtual/libx11 = "libx11"
> > > >>
> > > >> (as well as using the core-image-lsb and/or task-core-lsb components.)
> > > >>
> > > >> If you've tried this and those items are still broken, let me know and I can
> > > >> help investigate further. (One final note, only LSB 1.4 is currently supported.)
> > > >>
> > > >> --Mark
> > > >>
> > > >>> Any idea?
> > > >>>
> > > >>> thanks!
> > > >>>
> > > >>>
> > > >>
> > > >>
> > > >> _______________________________________________
> > > >> Openembedded-core mailing list
> > > >> Openembedded-core@lists.openembedded.org
> > > >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> > > >
> > >
> > >
> > > _______________________________________________
> > > Openembedded-core mailing list
> > > Openembedded-core@lists.openembedded.org
> > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >
> > --
> > Yi Qingliang
> > niqingliang@insigma.com.cn
> > https://niqingliang2003.wordpress.com
> >
>
> --
> Yi Qingliang
> niqingliang@insigma.com.cn
> https://niqingliang2003.wordpress.com
>
--
Yi Qingliang
niqingliang@insigma.com.cn
https://niqingliang2003.wordpress.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: gconf build error
2012-03-23 8:32 ` Ni Qingliang
@ 2012-03-23 9:30 ` Richard Purdie
2012-03-23 9:40 ` Ni Qingliang
1 sibling, 0 replies; 14+ messages in thread
From: Richard Purdie @ 2012-03-23 9:30 UTC (permalink / raw)
To: niqingliang, Patches and discussions about the oe-core layer
On Fri, 2012-03-23 at 16:32 +0800, Ni Qingliang wrote:
> Hello,
>
> I have made some progress after struggled a few days on it. found that
> the reason is located in the 'ld'.
> following is my investigation (focused on the IMPLICIT depended
> library):
>
> 1. call ld with sysroot and rpath
> $ld --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 ...
> -rpath /usr/lib/../lib
>
> then it will find the lib needed in the host's rootfs, that will result
> error.
>
> 2. call ld with sysroot and without rpath
> $ld --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 ...
>
> then it will find the lib needed in the directory sysroot arg specified.
> that is expected.
>
> I found that using the --verbose argument. Is the behaviour expected? or
> a bug?
That behaviour is expected. You should not be passing rpath /usr/lib
options to ld.
Cheers,
Richard
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: gconf build error
2012-03-23 8:32 ` Ni Qingliang
2012-03-23 9:30 ` Richard Purdie
@ 2012-03-23 9:40 ` Ni Qingliang
1 sibling, 0 replies; 14+ messages in thread
From: Ni Qingliang @ 2012-03-23 9:40 UTC (permalink / raw)
To: mark.hatle@windriver.com; +Cc: openembedded-core@lists.openembedded.org
and find some info may related:
http://sourceware.org/bugzilla/show_bug.cgi?id=10340
On Fri, 2012-03-23 at 16:32 +0800, 倪庆亮 wrote:
> Hello,
>
> I have made some progress after struggled a few days on it. found that
> the reason is located in the 'ld'.
> following is my investigation (focused on the IMPLICIT depended
> library):
>
> 1. call ld with sysroot and rpath
> $ld --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 ...
> -rpath /usr/lib/../lib
>
> then it will find the lib needed in the host's rootfs, that will result
> error.
>
> 2. call ld with sysroot and without rpath
> $ld --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 ...
>
> then it will find the lib needed in the directory sysroot arg specified.
> that is expected.
>
> I found that using the --verbose argument. Is the behaviour expected? or
> a bug?
>
> On Wed, 2012-03-21 at 16:45 +0800, 倪庆亮 wrote:
> > I'm building core-image-lsb (qemux86-64 with poky-lsb), and got error
> > when do_compile gconf. my host is ArchLinux x86-64.
> >
> > the error is occured when doing sanity-check, error like:
> > /usr/lib/../lib/libXrandr.so.2: undefined reference to
> > `memcpy@GLIBC_2.14'
> >
> > the build dir is "/media/pangu/lsbt", following step can reproduce the
> > error, my question is: why the libtool try to link with the lib on host
> > rootfs? because I have tried to remove the host's libXrandr.so.2, then
> > the error changed to another lib, so I ensure it linked to the host lib
> > wrongly.
> >
> > 1.
> > cd /media/pangu/lsbt/tmp/work/x86_64-poky-linux/gconf-3.2.3-r8/GConf-3.2.3/gconf
> >
> > 2. export
> > PATH="/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/bin/x86_64-poky-linux:/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/bin/crossscripts:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/sbin:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/bin:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/sbin:/media/pangu/lsbt/tmp/sysroots/x86_64-linux//bin:/media/pangu/lsbt:/media/pangu/optimus/scripts:/media/pangu/optimus/bitbake/bin/:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/bin/core_perl:/media/pangu/optimus/scripts"
> >
> > 3. ../x86_64-poky-linux-libtool --tag=CC --mode=link
> > x86_64-poky-linux-gcc -m64
> > --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 -O2 -pipe -g
> > -feliminate-unused-debug-types -Wall -DGCONF_ENABLE_DEBUG=1 -Wl,-O1
> > -Wl,--hash-style=gnu -Wl,--as-needed -o gconf-sanity-check-2
> > gconf-sanity-check.o libgconf-2.la -pthread -Wl,--export-dynamic
> > -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0
> > -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype
> > -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
> > -lxml2
> >
> >
> > 4. and then I can get the error, after add '-t -v' in the step 2, I got:
> > x86_64-poky-linux-libtool: link: x86_64-poky-linux-gcc -m64
> > --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 -O2 -pipe -g
> > -feliminate-unused-debug-types -Wall -DGCONF_ENABLE_DEBUG=1 -Wl,-O1
> > -Wl,--hash-style=gnu -Wl,--as-needed -o .libs/gconf-sanity-check-2
> > gconf-sanity-check.o -pthread -Wl,--export-dynamic -t
> > -v ./.libs/libgconf-2.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-glib-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgtk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libatk-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangocairo-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangoft2-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libstdc++.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk_pixbuf-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgio-2.0.so -lresolv /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libcairo.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpixman-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpng12.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXrender.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libX11.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxcb.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXau.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXdmcp.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpango-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfontconfig.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfreetype.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libexpat.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgobject-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libffi.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgmodule-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgthread-2.0.so -lpthread /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libglib-2.0.so -lrt /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxml2.so -ldl -lz -lm -pthread -Wl,-rpath -Wl,/usr/lib/../lib
> > Using built-in specs.
> > COLLECT_GCC=x86_64-poky-linux-gcc
> > COLLECT_LTO_WRAPPER=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/lto-wrapper
> > Target: x86_64-poky-linux
> > Configured with: /media/pangu/lsbt/tmp/work-shared/gcc-4.6.3
> > +svnr184847-r23/gcc-4_6-branch/configure --build=x86_64-linux
> > --host=x86_64-linux --target=x86_64-poky-linux
> > --prefix=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr
> > --exec_prefix=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr
> > --bindir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/bin/x86_64-poky-linux --sbindir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/bin/x86_64-poky-linux --libexecdir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux --datadir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/share --sysconfdir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/etc --sharedstatedir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/com --localstatedir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/var --libdir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux --includedir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/include --oldincludedir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/include --infodir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/share/info --mandir=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/media/pangu/lsbt/tmp/sysroots/x86_64-linux --with-gnu-ld --enable-shared --enable-languages=c,c++ --enable-threads=posix --disable-multilib --enable-c99 --enable-long-long --enable-symvers=gnu --enable-libstdcxx-pch --program-prefix=x86_64-poky-linux- --enable-target-optspace --enable-lto --enable-libssp --disable-bootstrap --disable-libgomp --disable-libmudflap --with-system-zlib --with-linker-hash-style=gnu --enable-cheaders=c_global --with-local-prefix=/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr --with-gxx-include-dir=/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/include/c++ --with-sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 --with-build-sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 --enable-poison-system-directories --with-headers=/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/include --disable-libunwind-exceptions --with-mpfr=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr --with-system-zlib --disable-nls --enable-__cxa_atexit
> > Thread model: posix
> > gcc version 4.6.4 20120303 (prerelease) (GCC)
> > COMPILER_PATH=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/
> > LIBRARY_PATH=/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/../../../../../x86_64-poky-linux/lib/../lib/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/../lib/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/:/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/../../../../../x86_64-poky-linux/lib/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/:/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/
> > COLLECT_GCC_OPTIONS='--sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64' '-m64' '-O2' '-pipe' '-g' '-feliminate-unused-debug-types' '-Wall' '-D' 'GCONF_ENABLE_DEBUG=1' '-o' '.libs/gconf-sanity-check-2' '-pthread' '-t' '-v' '-pthread' '-mtune=generic' '-march=x86-64'
> > /media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/collect2 --sysroot=/media/pangu/lsbt/tmp/sysroots/qemux86-64 --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib/ld-linux-x86-64.so.2 -o .libs/gconf-sanity-check-2 -t /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crt1.o /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crti.o /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/crtbegin.o -L/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4 -L/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/../../../../../x86_64-poky-linux/lib/../lib -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/../lib -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4 -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib -L/media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/../../../../../x86_64-poky-linux/lib -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib -L/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib -O1 --hash-style=gnu --as-needed gconf-sanity-check.o --export-dynamic ./.libs/libgconf-2.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-glib-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgtk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk-x11-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libatk-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangocairo-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangoft2-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libstdc++.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk_pixbuf-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgio-2.0.so -lresolv /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libcairo.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpixman-1.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpng12.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXrender.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libX11.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxcb.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXau.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXdmcp.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpango-1.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfontconfig.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfreetype.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libexpat.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgobject-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libffi.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgmodule-2.0.so /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgthread-2.0.so -lpthread /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libglib-2.0.so -lrt /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxml2.so -ldl -lz -lm -rpath /usr/lib/../lib -lgcc --as-needed -lgcc_s --no-as-needed -lpthread -lc -lgcc --as-needed -lgcc_s --no-as-needed /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/crtend.o /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crtn.o
> > /media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/ld: mode elf_x86_64
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crt1.o
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crti.o
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/crtbegin.o
> > gconf-sanity-check.o
> > ./.libs/libgconf-2.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-glib-1.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libdbus-1.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgtk-x11-2.0.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk-x11-2.0.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libatk-1.0.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangocairo-1.0.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpangoft2-1.0.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libstdc++.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgdk_pixbuf-2.0.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgio-2.0.so
> > -lresolv
> > (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libresolv.so)
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libcairo.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpixman-1.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpng12.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXrender.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libX11.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxcb.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXau.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libXdmcp.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libpango-1.0.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfontconfig.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libfreetype.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libexpat.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgobject-2.0.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libffi.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgmodule-2.0.so
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libgthread-2.0.so
> > /lib/libpthread.so.0
> > (/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/libpthread.so.0)
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libglib-2.0.so
> > -lrt (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/librt.so)
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libxml2.so
> > -ldl (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libdl.so)
> > -lz (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libz.so)
> > -lm (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/libm.so)
> > -lgcc_s
> > (/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/../lib/libgcc_s.so)
> > /lib/libpthread.so.0
> > (/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/libpthread.so.0)
> > /lib/libc.so.6 (/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/libc.so.6)
> > (/media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/libc_nonshared.a)elf-init.oS
> > /lib/ld-linux-x86-64.so.2
> > (/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/ld-linux-x86-64.so.2)
> > -lgcc_s
> > (/media/pangu/lsbt/tmp/sysroots/qemux86-64/lib/../lib/libgcc_s.so)
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/x86_64-poky-linux/4.6.4/crtend.o
> > /media/pangu/lsbt/tmp/sysroots/qemux86-64/usr/lib/../lib/crtn.o
> > /usr/lib/../lib/libXrandr.so.2: undefined reference to
> > `memcpy@GLIBC_2.14'
> > /media/pangu/lsbt/tmp/sysroots/x86_64-linux/usr/libexec/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.4/ld: link errors found, deleting executable `.libs/gconf-sanity-check-2'
> > collect2: ld returned 1 exit status
> >
> >
> > On Tue, 2012-03-20 at 17:20 +0800, 倪庆亮 wrote:
> > > I do a clean building with the same error. I have not touched the
> > > specific glibc version.
> > >
> > > as I said, the do_compile should use the libXrandr in build_sysroot
> > > directory, but it used it in host system. and I have checked that, there
> > > IS the lib in build_sysroot directory.
> > >
> > > you can build it successfully, only because your host's lib is using
> > > glibc 2.13, but I'm using archlinux, all package is the newest.
> > >
> > > the gconf used host's libXrandr, but want check its dependency in
> > > build_sysroot, that is the reason, MAYBE.
> > >
> > > I will do a clean building again, and I don't think it will change
> > > anything.
> > >
> > > On Fri, 2012-03-16 at 23:36 +0800, Mark Hatle wrote:
> > > > On 3/16/12 12:18 AM, Ni Qingliang wrote:
> > > > > when building qemux86-64 arch core-image-lsb (distro is poky-lsb), I got
> > > > > /usr/lib/../lib/libXrandr.so.2: undefined reference to
> > > > > `memcpy@GLIBC_2.14' when 'do_compile' gconf 3.2.3.
> > > > >
> > > > > the default eglibc is 2.13, why it needs 2.14?
> > > >
> > > > Without anything further, the only guess I can make is that either you aren't
> > > > using the version of glibc you think you are, it's gotten some host
> > > > contamination, an explicit reference was added to libXrandr (doubtful), or you
> > > > are using something that was built/cached from a previous build. (i.e. did you
> > > > build w/ eglibc 2.14/2.15 -- and then switch back to eglibc 2.13 for some reason?)
> > > >
> > > > On 3/15/12 9:38 PM, Ni Qingliang wrote:
> > > > > first, thanks your reply.
> > > > >
> > > > > Because I can't use task-core-lsb on my device (flash space is not
> > > > > enough), I have to make a custom lsb-base image (without
> > > > > perl/python/graphics).
> > > > >
> > > > > I have checked the "linuxstdbase", and it will change the configure
> > > > > option of some packages.
> > > > >
> > > > > Indeed, I think the daemon/failure/warning fuctions should be considered
> > > > > in package lsb's RDEPENDS.
> > > > >
> > > > > what I want to know is the rdepends or where is the
> > > > > daemon/failure/warning.
> > > >
> > > > It certainly looks like a component is missing somewhere in the shell scrips
> > > > that are provided by the LSB functions. I would assume that the
> > > > depends/provides is setup properly to point to whatever should be providing the
> > > > missing daemon, failure, warning commands. If it's not (or if by default -- non
> > > > lsb mode) they're not being built, it's a definite bug. You shouldn't be able
> > > > to build a non-functional systems.
> > > >
> > > > Please file a defect on bugzilla.yoctoproject.org. I will attempt to
> > > > investigate it (or someone else can). Hopefully it's just as a simple as a
> > > > missing dependency.
> > > >
> > > > --Mark
> > > >
> > > > > On Fri, 2012-03-16 at 00:25 +0800, Mark Hatle wrote:
> > > > >> On 3/15/12 3:18 AM, Ni Qingliang wrote:
> > > > >>> Hello, I'm working on custom lsb-base image using oe-core.
> > > > >>>
> > > > >>> and when using the lsb script, found error:
> > > > >>>
> > > > >>> lsb_start_daemon line 44: daemon command not found.
> > > > >>>
> > > > >>> similar thing happend on lsb_log_message: failure and warning command
> > > > >>> not found.
> > > > >>>
> > > > >>> maybe these function should be defined in /etc/init.d/functions?
> > > > >>>
> > > > >>> but there are not these function in this file (belongs to initscripts).
> > > > >>
> > > > >> Did you enable the LSB distribution settings? Without this, various components
> > > > >> may not be available.
> > > > >>
> > > > >> In Poky, there is a "poky-lsb" distribution type:
> > > > >>
> > > > >> DISTRO = "poky-lsb"
> > > > >> DISTROOVERRIDES = "poky:linuxstdbase"
> > > > >>
> > > > >> DISTRO_FEATURES_append = " pam largefile opengl"
> > > > >> PREFERRED_PROVIDER_virtual/libx11 = "libx11"
> > > > >>
> > > > >> (as well as using the core-image-lsb and/or task-core-lsb components.)
> > > > >>
> > > > >> If you've tried this and those items are still broken, let me know and I can
> > > > >> help investigate further. (One final note, only LSB 1.4 is currently supported.)
> > > > >>
> > > > >> --Mark
> > > > >>
> > > > >>> Any idea?
> > > > >>>
> > > > >>> thanks!
> > > > >>>
> > > > >>>
> > > > >>
> > > > >>
> > > > >> _______________________________________________
> > > > >> Openembedded-core mailing list
> > > > >> Openembedded-core@lists.openembedded.org
> > > > >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> > > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Openembedded-core mailing list
> > > > Openembedded-core@lists.openembedded.org
> > > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> > >
> > > --
> > > Yi Qingliang
> > > niqingliang@insigma.com.cn
> > > https://niqingliang2003.wordpress.com
> > >
> >
> > --
> > Yi Qingliang
> > niqingliang@insigma.com.cn
> > https://niqingliang2003.wordpress.com
> >
>
> --
> Yi Qingliang
> niqingliang@insigma.com.cn
> https://niqingliang2003.wordpress.com
>
--
Yi Qingliang
niqingliang@insigma.com.cn
https://niqingliang2003.wordpress.com
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2012-03-23 9:51 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-15 8:18 LSB support? Ni Qingliang
2012-03-15 16:25 ` Mark Hatle
2012-03-16 2:38 ` Ni Qingliang
2012-03-16 5:18 ` Ni Qingliang
2012-03-16 15:36 ` Mark Hatle
2012-03-19 1:47 ` Ni Qingliang
2012-03-19 6:33 ` Ni Qingliang
2012-03-19 16:07 ` Mark Hatle
2012-03-20 2:56 ` Ni Qingliang
2012-03-20 9:20 ` Ni Qingliang
2012-03-21 8:45 ` gconf build error Ni Qingliang
2012-03-23 8:32 ` Ni Qingliang
2012-03-23 9:30 ` Richard Purdie
2012-03-23 9:40 ` Ni Qingliang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox