* [PATCH 1/1] nspr 4.8.9: failed to build on x86_64 board
2012-03-27 9:37 [PATCH 0/1] nspr 4.8.9: failed to build on x86_64 board Robert Yang
@ 2012-03-27 9:37 ` Robert Yang
2012-04-03 22:36 ` [PATCH 0/1] " Saul Wold
1 sibling, 0 replies; 3+ messages in thread
From: Robert Yang @ 2012-03-27 9:37 UTC (permalink / raw)
To: openembedded-core
nspr failed to build on x86_64 board(e.g., qemux86-64):
x86_64-poky-linux-gcc -m64 ... -m32 ...
...
fatal error: gnu/stubs-32.h: No such file or directory
This is because there are both '-m64' and '-m32' in gcc's options, and
the later one is used, but what we need is '-m64' since it is x86_64,
this is caused by an incorrect logic in configure.in, we should assume
that the pkg uses 64bit when target_cpu is x86_64 (it has two options:
--enable-n32 and --enable-64bit, both of them are not set by default),
we only can assume that the pkg uses 32bit when USE_N32 is set. But
what it did was that assumed 32bit when target_cpu was x86_64 unless
--enable-64bit was set, this seems unreasonable and caused the "gcc -m64
-m32" error.
Some had noticed this error before:
https://lists.yoctoproject.org/pipermail/poky/2011-May/005799.html
NOTE:
* Both fix configure and configure.in since we can't run the
"autoreconf" for nsrp, please see more explanation in
trickly-fix-build-on-x86_64.patch.
* Also fixed powerpc64, this is just fixed by conclusion since we don't
suport ppc64.
[YOCTO #2179]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
---
.../nspr/files/fix-build-on-x86_64.patch | 51 ++++++++++++++++
.../nspr/files/trickly-fix-build-on-x86_64.patch | 62 ++++++++++++++++++++
meta/recipes-support/nspr/nspr_4.8.9.bb | 4 +-
3 files changed, 116 insertions(+), 1 deletions(-)
create mode 100644 meta/recipes-support/nspr/files/fix-build-on-x86_64.patch
create mode 100644 meta/recipes-support/nspr/files/trickly-fix-build-on-x86_64.patch
diff --git a/meta/recipes-support/nspr/files/fix-build-on-x86_64.patch b/meta/recipes-support/nspr/files/fix-build-on-x86_64.patch
new file mode 100644
index 0000000..a6fa1ea
--- /dev/null
+++ b/meta/recipes-support/nspr/files/fix-build-on-x86_64.patch
@@ -0,0 +1,51 @@
+Fix build failure on x86_64
+
+When the target_cpu is x86_64, we should assume that the pkg uses 64bit,
+only if USE_N32 is set, we can assume that the pkg uses 32bit. It used a
+opposite logic before.
+
+Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
+
+Upstream-Status: Pending
+---
+ configure.in | 12 ++++++------
+ 1 files changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/configure.in b/configure.in
+index 39c96a3..99a03ac 100644
+--- a/configure.in
++++ b/configure.in
+@@ -1778,24 +1778,24 @@ tools are selected during the Xcode/Developer Tools installation.])
+ PR_MD_ASFILES=os_Linux_ia64.s
+ ;;
+ x86_64)
+- if test -n "$USE_64"; then
+- PR_MD_ASFILES=os_Linux_x86_64.s
+- else
++ if test -n "$USE_N32"; then
+ AC_DEFINE(i386)
+ PR_MD_ASFILES=os_Linux_x86.s
+ CC="$CC -m32"
+ CXX="$CXX -m32"
++ else
++ PR_MD_ASFILES=os_Linux_x86_64.s
+ fi
+ ;;
+ ppc|powerpc)
+ PR_MD_ASFILES=os_Linux_ppc.s
+ ;;
+ powerpc64)
+- if test -n "$USE_64"; then
++ if test -n "$USE_N32"; then
++ PR_MD_ASFILES=os_Linux_ppc.s
++ else
+ CC="$CC -m64"
+ CXX="$CXX -m64"
+- else
+- PR_MD_ASFILES=os_Linux_ppc.s
+ fi
+ ;;
+ m68k)
+--
+1.7.1
+
diff --git a/meta/recipes-support/nspr/files/trickly-fix-build-on-x86_64.patch b/meta/recipes-support/nspr/files/trickly-fix-build-on-x86_64.patch
new file mode 100644
index 0000000..8ca51e4
--- /dev/null
+++ b/meta/recipes-support/nspr/files/trickly-fix-build-on-x86_64.patch
@@ -0,0 +1,62 @@
+trickily fix build failure on x86_64
+
+It seems that we can not run the 'autoreconf -f -i' for the nspr, I met
+several strange problems while trying to do that, and the previous
+author seemed had noticed this, so he wrote:
+
+do_configure() {
+ oe_runconf
+}
+
+to avoid running the "autoreconf". But we must modify configure.in to
+fix the build failure on x86_64, so both modify configure and
+configure.in, once the "autoreconf" can work correctly, we can remove
+this patch.
+
+Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
+
+Upstream-Status: Inappropriate [configuration]
+---
+ configure | 12 ++++++------
+ 1 files changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/configure b/configure
+--- a/configure
++++ b/configure
+@@ -4366,9 +4366,7 @@ EOF
+ PR_MD_ASFILES=os_Linux_ia64.s
+ ;;
+ x86_64)
+- if test -n "$USE_64"; then
+- PR_MD_ASFILES=os_Linux_x86_64.s
+- else
++ if test -n "$USE_N32"; then
+ cat >> confdefs.h <<\EOF
+ #define i386 1
+ EOF
+@@ -4376,17 +4374,19 @@ EOF
+ PR_MD_ASFILES=os_Linux_x86.s
+ CC="$CC -m32"
+ CXX="$CXX -m32"
++ else
++ PR_MD_ASFILES=os_Linux_x86_64.s
+ fi
+ ;;
+ ppc|powerpc)
+ PR_MD_ASFILES=os_Linux_ppc.s
+ ;;
+ powerpc64)
+- if test -n "$USE_64"; then
++ if test -n "$USE_N32"; then
++ PR_MD_ASFILES=os_Linux_ppc.s
++ else
+ CC="$CC -m64"
+ CXX="$CXX -m64"
+- else
+- PR_MD_ASFILES=os_Linux_ppc.s
+ fi
+ ;;
+ m68k)
+--
+1.7.1
+
diff --git a/meta/recipes-support/nspr/nspr_4.8.9.bb b/meta/recipes-support/nspr/nspr_4.8.9.bb
index 8b840d9..f70c2c1 100644
--- a/meta/recipes-support/nspr/nspr_4.8.9.bb
+++ b/meta/recipes-support/nspr/nspr_4.8.9.bb
@@ -5,10 +5,12 @@ LIC_FILES_CHKSUM = "file://configure.in;beginline=3;endline=40;md5=99d4d7d68bbc4
file://Makefile.in;beginline=4;endline=38;md5=c2b512182a334e1bfa1edc4d1c84a298 "
SECTION = "libs/network"
-PR = "r2"
+PR = "r3"
SRC_URI = "ftp://ftp.mozilla.org/pub/mozilla.org/nspr/releases/v${PV}/src/nspr-${PV}.tar.gz \
file://remove-rpath-from-tests.patch \
+ file://fix-build-on-x86_64.patch \
+ file://trickly-fix-build-on-x86_64.patch \
"
SRC_URI += "file://nspr.pc.in"
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread