* [PATCH 0/1] meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64
@ 2012-04-09 10:22 Robert Yang
2012-04-09 10:22 ` [PATCH 1/1] " Robert Yang
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Robert Yang @ 2012-04-09 10:22 UTC (permalink / raw)
To: openembedded-core
Test info:
* Have tested on:
* Fedora 16 x86_64
* Opensuse 12.1 x86_64
* Ubuntu 10.04
* The testing commands are:
$ bitbake core-image-sato meta-toolchain meta-toolchain-sdk
And untar the sdk, then runqemu from the sdk to start the target.
// Robert
The following changes since commit 1a82989345fb98becb487d270fd93a5e6dffeb47:
runqemu-internal: Add console=tty for qemuppc and NFS (2012-04-06 01:12:15 +0100)
are available in the git repository at:
git://git.pokylinux.org/poky-contrib robert/tc
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=robert/tc
Robert Yang (1):
meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64
meta/conf/distro/include/tcmode-default.inc | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH 1/1] meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64
2012-04-09 10:22 [PATCH 0/1] meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64 Robert Yang
@ 2012-04-09 10:22 ` Robert Yang
2012-04-09 10:36 ` [PATCH 0/1] " Lu, Lianhao
2012-04-10 15:35 ` Saul Wold
2 siblings, 0 replies; 8+ messages in thread
From: Robert Yang @ 2012-04-09 10:22 UTC (permalink / raw)
To: openembedded-core
runqemu can't launch a target image on Fedora 16 64bit or Opensuse 12.1
64bit, this is because runqemu needs the host's libGL.so, which requires
GLIBC_2.14 which is defined in libc.so.6, but our default libc.so.6 is
version 2.13, here is the message from Richard:
The easiest solution would be to change the nativesdk libc to 2.15. I don't
think we plan to do this for the target libc for 1.2 but we could change
nativesdk's version if its well tested
[YOCTO #1968]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
---
meta/conf/distro/include/tcmode-default.inc | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/meta/conf/distro/include/tcmode-default.inc b/meta/conf/distro/include/tcmode-default.inc
index b481163..3dc0932 100644
--- a/meta/conf/distro/include/tcmode-default.inc
+++ b/meta/conf/distro/include/tcmode-default.inc
@@ -44,9 +44,9 @@ PREFERRED_VERSION_linux-libc-headers ?= "${LINUXLIBCVERSION}"
PREFERRED_VERSION_linux-libc-headers-nativesdk ?= "${LINUXLIBCVERSION}"
PREFERRED_VERSION_eglibc ?= "${EGLIBCVERSION}"
PREFERRED_VERSION_eglibc-locale ?= "${EGLIBCVERSION}"
-PREFERRED_VERSION_eglibc-nativesdk ?= "${EGLIBCVERSION}"
+PREFERRED_VERSION_eglibc-nativesdk ?= "2.15"
PREFERRED_VERSION_eglibc-initial ?= "${EGLIBCVERSION}"
-PREFERRED_VERSION_eglibc-initial-nativesdk ?= "${EGLIBCVERSION}"
+PREFERRED_VERSION_eglibc-initial-nativesdk ?= "2.15"
PREFERRED_VERSION_cross-localedef-native ?= "${EGLIBCVERSION}"
PREFERRED_VERSION_uclibc ?= "${UCLIBCVERSION}"
PREFERRED_VERSION_uclibc-initial ?= "${UCLIBCVERSION}"
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH 0/1] meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64
2012-04-09 10:22 [PATCH 0/1] meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64 Robert Yang
2012-04-09 10:22 ` [PATCH 1/1] " Robert Yang
@ 2012-04-09 10:36 ` Lu, Lianhao
2012-04-09 12:21 ` Robert Yang
2012-04-10 15:35 ` Saul Wold
2 siblings, 1 reply; 8+ messages in thread
From: Lu, Lianhao @ 2012-04-09 10:36 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
Robert Yang wrote on 2012-04-09:
> Test info:
> * Have tested on:
> * Fedora 16 x86_64
> * Opensuse 12.1 x86_64
Robert,
Hongna just found a qemu launch error on openSuse x86_64 using the 2.15 eglibc-nativesdk, something about the SDL initialization error. Did your platform work well?
> * Ubuntu 10.04
> * The testing commands are:
> $ bitbake core-image-sato meta-toolchain meta-toolchain-sdk
>
> And untar the sdk, then runqemu from the sdk to start the target.
> // Robert
>
> The following changes since commit 1a82989345fb98becb487d270fd93a5e6dffeb47:
>
> runqemu-internal: Add console=tty for qemuppc and NFS (2012-04-06 01:12:15 +0100)
> are available in the git repository at:
> git://git.pokylinux.org/poky-contrib robert/tc
> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=robert/tc
> Robert Yang (1):
> meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64
> meta/conf/distro/include/tcmode-default.inc | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
> _______________________________________________ Openembedded-core
> mailing list Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Best Regards,
Lianhao
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 0/1] meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64
2012-04-09 10:36 ` [PATCH 0/1] " Lu, Lianhao
@ 2012-04-09 12:21 ` Robert Yang
2012-04-10 2:10 ` Robert Yang
0 siblings, 1 reply; 8+ messages in thread
From: Robert Yang @ 2012-04-09 12:21 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
On 04/09/2012 06:36 PM, Lu, Lianhao wrote:
>
> Robert Yang wrote on 2012-04-09:
>> Test info:
>> * Have tested on:
>> * Fedora 16 x86_64
>> * Opensuse 12.1 x86_64
>
> Robert,
> Hongna just found a qemu launch error on openSuse x86_64 using the 2.15 eglibc-nativesdk, something about the SDL initialization error. Did your platform work well?
>
Maybe he just used "ssh" without "-X" or "-Y" ? There would be an SDL
initialization error when ssh without "-X" or "-Y". It worked well for me.
// Robert
>> * Ubuntu 10.04
>> * The testing commands are:
>> $ bitbake core-image-sato meta-toolchain meta-toolchain-sdk
>>
>> And untar the sdk, then runqemu from the sdk to start the target.
>> // Robert
>>
>> The following changes since commit 1a82989345fb98becb487d270fd93a5e6dffeb47:
>>
>> runqemu-internal: Add console=tty for qemuppc and NFS (2012-04-06 01:12:15 +0100)
>> are available in the git repository at:
>> git://git.pokylinux.org/poky-contrib robert/tc
>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=robert/tc
>> Robert Yang (1):
>> meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64
>> meta/conf/distro/include/tcmode-default.inc | 4 ++--
>> 1 files changed, 2 insertions(+), 2 deletions(-)
>>
>> _______________________________________________ Openembedded-core
>> mailing list Openembedded-core@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
> Best Regards,
> Lianhao
>
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 0/1] meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64
2012-04-09 12:21 ` Robert Yang
@ 2012-04-10 2:10 ` Robert Yang
2012-04-10 4:06 ` Lu, Lianhao
0 siblings, 1 reply; 8+ messages in thread
From: Robert Yang @ 2012-04-10 2:10 UTC (permalink / raw)
To: openembedded-core
On 04/09/2012 08:21 PM, Robert Yang wrote:
>
>
> On 04/09/2012 06:36 PM, Lu, Lianhao wrote:
>>
>> Robert Yang wrote on 2012-04-09:
>>> Test info:
>>> * Have tested on:
>>> * Fedora 16 x86_64
>>> * Opensuse 12.1 x86_64
>>
>> Robert,
>> Hongna just found a qemu launch error on openSuse x86_64 using the 2.15
>> eglibc-nativesdk, something about the SDL initialization error. Did your
>> platform work well?
>>
>
Here is the update information from Hongna:
I have finished the test on opensuse x86-64, both qemuarm and qemux86 do
cross debug pass using 2.15 toolchain.
// Robert
> Maybe he just used "ssh" without "-X" or "-Y" ? There would be an SDL
> initialization error when ssh without "-X" or "-Y". It worked well for me.
>
> // Robert
>
>>> * Ubuntu 10.04
>>> * The testing commands are:
>>> $ bitbake core-image-sato meta-toolchain meta-toolchain-sdk
>>>
>>> And untar the sdk, then runqemu from the sdk to start the target.
>>> // Robert
>>>
>>> The following changes since commit 1a82989345fb98becb487d270fd93a5e6dffeb47:
>>>
>>> runqemu-internal: Add console=tty for qemuppc and NFS (2012-04-06 01:12:15
>>> +0100)
>>> are available in the git repository at:
>>> git://git.pokylinux.org/poky-contrib robert/tc
>>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=robert/tc
>>> Robert Yang (1):
>>> meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64
>>> meta/conf/distro/include/tcmode-default.inc | 4 ++--
>>> 1 files changed, 2 insertions(+), 2 deletions(-)
>>>
>>> _______________________________________________ Openembedded-core
>>> mailing list Openembedded-core@lists.openembedded.org
>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>>
>> Best Regards,
>> Lianhao
>>
>>
>>
>> _______________________________________________
>> Openembedded-core mailing list
>> Openembedded-core@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 0/1] meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64
2012-04-10 2:10 ` Robert Yang
@ 2012-04-10 4:06 ` Lu, Lianhao
2012-04-10 4:47 ` Robert Yang
0 siblings, 1 reply; 8+ messages in thread
From: Lu, Lianhao @ 2012-04-10 4:06 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
Robert Yang wrote on 2012-04-10:
>
>
> On 04/09/2012 08:21 PM, Robert Yang wrote:
>>
>>
>> On 04/09/2012 06:36 PM, Lu, Lianhao wrote:
>>>
>>> Robert Yang wrote on 2012-04-09:
>>>> Test info:
>>>> * Have tested on:
>>>> * Fedora 16 x86_64
>>>> * Opensuse 12.1 x86_64
>>>
>>> Robert,
>>> Hongna just found a qemu launch error on openSuse x86_64 using the 2.15
>>> eglibc-nativesdk, something about the SDL initialization error. Did your
>>> platform work well?
>>>
>>
>
> Here is the update information from Hongna:
>
> I have finished the test on opensuse x86-64, both qemuarm and qemux86 do
> cross debug pass using 2.15 toolchain.
>
> // Robert
>
>> Maybe he just used "ssh" without "-X" or "-Y" ? There would be an SDL
>> initialization error when ssh without "-X" or "-Y". It worked well for me.
>>
>> // Robert
It just popped into my mind that when ssh with X forwarding, does the SDL initialization happen on the Xserver, which is NOT openSuse x86-64, while the xclient(qemu) is running on openSue? Could you try launching the qemu directly on the openSuse? Thanks!
-Lianhao
>>
>>>> * Ubuntu 10.04
>>>> * The testing commands are:
>>>> $ bitbake core-image-sato meta-toolchain meta-toolchain-sdk
>>>>
>>>> And untar the sdk, then runqemu from the sdk to start the target.
>>>> // Robert
>>>>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 0/1] meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64
2012-04-10 4:06 ` Lu, Lianhao
@ 2012-04-10 4:47 ` Robert Yang
0 siblings, 0 replies; 8+ messages in thread
From: Robert Yang @ 2012-04-10 4:47 UTC (permalink / raw)
To: openembedded-core
On 04/10/2012 12:06 PM, Lu, Lianhao wrote:
>
> Robert Yang wrote on 2012-04-10:
>>
>>
>> On 04/09/2012 08:21 PM, Robert Yang wrote:
>>>
>>>
>>> On 04/09/2012 06:36 PM, Lu, Lianhao wrote:
>>>>
>>>> Robert Yang wrote on 2012-04-09:
>>>>> Test info:
>>>>> * Have tested on:
>>>>> * Fedora 16 x86_64
>>>>> * Opensuse 12.1 x86_64
>>>>
>>>> Robert,
>>>> Hongna just found a qemu launch error on openSuse x86_64 using the 2.15
>>>> eglibc-nativesdk, something about the SDL initialization error. Did your
>>>> platform work well?
>>>>
>>>
>>
>> Here is the update information from Hongna:
>>
>> I have finished the test on opensuse x86-64, both qemuarm and qemux86 do
>> cross debug pass using 2.15 toolchain.
>>
>> // Robert
>>
>>> Maybe he just used "ssh" without "-X" or "-Y" ? There would be an SDL
>>> initialization error when ssh without "-X" or "-Y". It worked well for me.
>>>
>>> // Robert
>
> It just popped into my mind that when ssh with X forwarding, does the SDL initialization happen on the Xserver, which is NOT openSuse x86-64, while the xclient(qemu) is running on openSue? Could you try launching the qemu directly on the openSuse? Thanks!
>
Launching the qemu directly on the openSuse worked well, the ssh client is only
for displaying the result from the server(opensuse 12.1 x86-64).
I usually use ssh -X or -Y to launch runqemu.
// Robert
> -Lianhao
>
>>>
>>>>> * Ubuntu 10.04
>>>>> * The testing commands are:
>>>>> $ bitbake core-image-sato meta-toolchain meta-toolchain-sdk
>>>>>
>>>>> And untar the sdk, then runqemu from the sdk to start the target.
>>>>> // Robert
>>>>>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 0/1] meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64
2012-04-09 10:22 [PATCH 0/1] meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64 Robert Yang
2012-04-09 10:22 ` [PATCH 1/1] " Robert Yang
2012-04-09 10:36 ` [PATCH 0/1] " Lu, Lianhao
@ 2012-04-10 15:35 ` Saul Wold
2 siblings, 0 replies; 8+ messages in thread
From: Saul Wold @ 2012-04-10 15:35 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
On 04/09/2012 03:22 AM, Robert Yang wrote:
> Test info:
> * Have tested on:
> * Fedora 16 x86_64
> * Opensuse 12.1 x86_64
> * Ubuntu 10.04
>
> * The testing commands are:
> $ bitbake core-image-sato meta-toolchain meta-toolchain-sdk
>
> And untar the sdk, then runqemu from the sdk to start the target.
>
> // Robert
>
> The following changes since commit 1a82989345fb98becb487d270fd93a5e6dffeb47:
>
> runqemu-internal: Add console=tty for qemuppc and NFS (2012-04-06 01:12:15 +0100)
>
> are available in the git repository at:
> git://git.pokylinux.org/poky-contrib robert/tc
> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=robert/tc
>
> Robert Yang (1):
> meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64
>
> meta/conf/distro/include/tcmode-default.inc | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
Merged into OE-Core
Thanks
Sau!
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2012-04-10 15:44 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-04-09 10:22 [PATCH 0/1] meta-toolchain: runqemu falied on FC16/Opensuse12.1 x86_64 Robert Yang
2012-04-09 10:22 ` [PATCH 1/1] " Robert Yang
2012-04-09 10:36 ` [PATCH 0/1] " Lu, Lianhao
2012-04-09 12:21 ` Robert Yang
2012-04-10 2:10 ` Robert Yang
2012-04-10 4:06 ` Lu, Lianhao
2012-04-10 4:47 ` Robert Yang
2012-04-10 15:35 ` Saul Wold
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox