Openembedded Core Discussions
 help / color / mirror / Atom feed
From: Saul Wold <sgw@linux.intel.com>
To: Patches and discussions about the oe-core layer
	<openembedded-core@lists.openembedded.org>
Subject: Re: [PATCH 6/6] image.bbclass: Add support to build the SDK in parallel with the image
Date: Mon, 02 Jul 2012 12:44:41 -0700	[thread overview]
Message-ID: <4FF1FA29.8050209@linux.intel.com> (raw)
In-Reply-To: <28adf5fdb58c3409ec2dcc1a8dfffaaf2a8eab2b.1341032578.git.mark.hatle@windriver.com>

On 06/29/2012 10:07 PM, Mark Hatle wrote:
> When building an image recipe, you can now build a companion SDK by
> calling the populate_sdk task:
>    bitbake -c populate_sdk core-image-minimal
>
> Note: there are still issues w/ the SDK not working completely with
> multilibs.
>
> A lock is required between rootfs and populate_sdk activities to prevent
> configuration file clashes and similar package management problems in ipk
> and deb based systems.  (RPM already had a lock for a different reason.)
>

Mark this seems to have broken non-gplv3 builds.  I get the following 
error now:

> NOTE: Resolving any missing task queue dependencies
> ERROR: Nothing RPROVIDES 'binutils-cross-canadian-i586' (but /intel/poky/distro/meta/recipes-core/tasks/task-cross-canadian.bb RDEPENDS on or otherwise requires it)
> ERROR: binutils-cross-canadian-i586 was skipped: incompatible with license GPLv3
> NOTE: Runtime target 'binutils-cross-canadian-i586' is unbuildable, removing...
> Missing or unbuildable dependency chain was: ['binutils-cross-canadian-i586']
> NOTE: Runtime target 'task-cross-canadian-i586' is unbuildable, removing...
> Missing or unbuildable dependency chain was: ['task-cross-canadian-i586', 'binutils-cross-canadian-i586']
> ERROR: Required build target 'core-image-minimal' has no buildable providers.
> Missing or unbuildable dependency chain was: ['core-image-minimal', 'task-cross-canadian-i586', 'binutils-cross-canadian-i586']
>
> Summary: There were 2 ERROR messages shown, returning a non-zero exit code.


I am going to hold off on this patch set until this is resolved.

Thanks

	Sau!


> Signed-off-by: Mark Hatle<mark.hatle@windriver.com>
> ---
>   meta/classes/image.bbclass             |    5 +++++
>   meta/classes/populate_sdk_base.bbclass |    1 +
>   meta/classes/populate_sdk_deb.bbclass  |    2 ++
>   meta/classes/populate_sdk_ipk.bbclass  |    2 ++
>   meta/classes/rootfs_deb.bbclass        |    2 ++
>   meta/classes/rootfs_ipk.bbclass        |    2 ++
>   6 files changed, 14 insertions(+), 0 deletions(-)
>
> diff --git a/meta/classes/image.bbclass b/meta/classes/image.bbclass
> index 4f50376..7e41982 100644
> --- a/meta/classes/image.bbclass
> +++ b/meta/classes/image.bbclass
> @@ -3,6 +3,11 @@ inherit rootfs_${IMAGE_PKGTYPE}
>   IMAGETEST ?= "dummy"
>   inherit imagetest-${IMAGETEST}
>
> +inherit populate_sdk_base
> +
> +TOOLCHAIN_TARGET_TASK += "${PACKAGE_INSTALL}"
> +TOOLCHAIN_TARGET_TASK_ATTEMPTONLY += "${PACKAGE_INSTALL_ATTEMPTONLY} ${PACKAGE_GROUP_dev-pkgs} ${PACKAGE_GROUP_dbg-pkgs}"
> +
>   inherit gzipnative
>
>   LICENSE = "MIT"
> diff --git a/meta/classes/populate_sdk_base.bbclass b/meta/classes/populate_sdk_base.bbclass
> index 6dc66fb..ed2dca0 100644
> --- a/meta/classes/populate_sdk_base.bbclass
> +++ b/meta/classes/populate_sdk_base.bbclass
> @@ -120,6 +120,7 @@ populate_sdk_log_check() {
>   	done
>   }
>
> +do_populate_sdk[dirs] = "${TOPDIR}"
>   do_populate_sdk[nostamp] = "1"
>   do_populate_sdk[depends] = "${@' '.join([x + ':do_populate_sysroot' for x in d.getVar('SDK_DEPENDS', True).split()])}"
>   do_populate_sdk[rdepends] = "${@' '.join([x + ':do_populate_sysroot' for x in d.getVar('SDK_RDEPENDS', True).split()])}"
> diff --git a/meta/classes/populate_sdk_deb.bbclass b/meta/classes/populate_sdk_deb.bbclass
> index c3b3e0c..9e9e1e1 100644
> --- a/meta/classes/populate_sdk_deb.bbclass
> +++ b/meta/classes/populate_sdk_deb.bbclass
> @@ -6,6 +6,8 @@ DEB_SDK_ARCH = "${@[d.getVar('SDK_ARCH', True), "i386"]\
>                   [d.getVar('SDK_ARCH', True) in \
>                   ["x86", "i486", "i586", "i686", "pentium"]]}"
>
> +do_populate_sdk[lockfiles] += "${WORKDIR}/deb.lock"
> +
>   populate_sdk_post_deb () {
>
>   	local target_rootfs=$1
> diff --git a/meta/classes/populate_sdk_ipk.bbclass b/meta/classes/populate_sdk_ipk.bbclass
> index aa3efde..4321afb 100644
> --- a/meta/classes/populate_sdk_ipk.bbclass
> +++ b/meta/classes/populate_sdk_ipk.bbclass
> @@ -1,6 +1,8 @@
>   do_populate_sdk[depends] += "opkg-native:do_populate_sysroot opkg-utils-native:do_populate_sysroot"
>   do_populate_sdk[recrdeptask] += "do_package_write_ipk"
>
> +do_populate_sdk[lockfiles] += "${WORKDIR}/ipk.lock"
> +
>   populate_sdk_ipk() {
>
>   	rm -f ${IPKGCONF_TARGET}
> diff --git a/meta/classes/rootfs_deb.bbclass b/meta/classes/rootfs_deb.bbclass
> index 6c9767f..4ea71da 100644
> --- a/meta/classes/rootfs_deb.bbclass
> +++ b/meta/classes/rootfs_deb.bbclass
> @@ -8,6 +8,8 @@ ROOTFS_PKGMANAGE_BOOTSTRAP  = "run-postinsts"
>   do_rootfs[depends] += "dpkg-native:do_populate_sysroot apt-native:do_populate_sysroot"
>   do_rootfs[recrdeptask] += "do_package_write_deb"
>
> +do_rootfs[lockfiles] += "${WORKDIR}/deb.lock"
> +
>   DEB_POSTPROCESS_COMMANDS = "rootfs_install_all_locales; "
>
>   opkglibdir = "${localstatedir}/lib/opkg"
> diff --git a/meta/classes/rootfs_ipk.bbclass b/meta/classes/rootfs_ipk.bbclass
> index 1580086..9732385 100644
> --- a/meta/classes/rootfs_ipk.bbclass
> +++ b/meta/classes/rootfs_ipk.bbclass
> @@ -12,6 +12,8 @@ ROOTFS_PKGMANAGE_BOOTSTRAP  = "run-postinsts"
>   do_rootfs[depends] += "opkg-native:do_populate_sysroot opkg-utils-native:do_populate_sysroot"
>   do_rootfs[recrdeptask] += "do_package_write_ipk"
>
> +do_rootfs[lockfiles] += "${WORKDIR}/ipk.lock"
> +
>   IPKG_ARGS = "-f ${IPKGCONF_TARGET} -o ${IMAGE_ROOTFS} --force-overwrite"
>
>   OPKG_PREPROCESS_COMMANDS = "package_update_index_ipk; package_generate_ipkg_conf"



  reply	other threads:[~2012-07-02 19:55 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-30  5:07 [PATCH 0/6] Enable the ability to create an image matching SDK Mark Hatle
2012-06-30  5:07 ` [PATCH 1/6] Fix manual log file paths Mark Hatle
2012-06-30  5:07 ` [PATCH 2/6] populate_sdk.bbclass: Split into two parts Mark Hatle
2012-06-30  5:07 ` [PATCH 3/6] populate_sdk: Allow for attempt only packages in the SDK Mark Hatle
2012-06-30  5:07 ` [PATCH 4/6] populate_sdk_base.bbclass: Change to using task specific depends Mark Hatle
2012-06-30  5:07 ` [PATCH 5/6] populate_sdk: enable basic multilib support Mark Hatle
2012-06-30  5:07 ` [PATCH 6/6] image.bbclass: Add support to build the SDK in parallel with the image Mark Hatle
2012-07-02 19:44   ` Saul Wold [this message]
2012-07-02 19:49     ` Mark Hatle
2012-07-02 20:05       ` Saul Wold
2012-07-02 20:12   ` Phil Blundell
2012-07-02 20:32     ` Mark Hatle
2012-07-02 21:05       ` Phil Blundell
2012-07-02 21:37         ` Mark Hatle
2012-07-03 23:47   ` Saul Wold
2012-07-02 15:20 ` [PATCH 0/6 v2] Enable the ability to create an image matching SDK McClintock Matthew-B29882
2012-07-02 16:27   ` Mark Hatle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FF1FA29.8050209@linux.intel.com \
    --to=sgw@linux.intel.com \
    --cc=openembedded-core@lists.openembedded.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox