Openssl - config file not being pulled in on the install

* Openssl - config file not being pulled in on the install
@ 2013-01-23 20:10 Belal, Awais
  2013-01-23 21:17 ` Saul Wold
  0 siblings, 1 reply; 4+ messages in thread
From: Belal, Awais @ 2013-01-23 20:10 UTC (permalink / raw)
  To: Openembedded-core@lists.openembedded.org

[-- Attachment #1.1: Type: text/plain, Size: 793 bytes --]

Hi Guys,

This probably went un-noticed because I forgot to put a subject the first time around... my bad!

I have a question regarding openssl. The openssl.inc file under the poky package creates a -misc package which is not directly installed unless either put in RDPENEDS or RRECOMMENDS. This package (-misc) contains the openssl configuration file which is required while generating certificates on the target otherwise the command says:

WARNING: can't open config file: /usr/lib/ssl/openssl.cnf
Unable to load config info from /usr/lib/ssl/openssl.cnf

In an older version of the recipe attached here, the correct method is being (this is my understanding) to get that file in on the target while installing.

Any guidance here would be much appreciated.

BR,
Awais Belal

[-- Attachment #1.2: Type: text/html, Size: 1638 bytes --]

[-- Attachment #2: openssl.inc --]
[-- Type: application/octet-stream, Size: 3372 bytes --]

DESCRIPTION = "Secure Socket Layer (SSL) binary and related cryptographic tools."
HOMEPAGE = "http://www.openssl.org/"
LICENSE = "openssl"
SECTION = "libs/network"

SRC_URI = "http://www.openssl.org/source/openssl-${PV}.tar.gz;name=src"
S = "${WORKDIR}/openssl-${PV}"

inherit siteinfo

INC_PR = "r14"

AR_append = " r"
CFLAG = "${@base_conditional('SITEINFO_ENDIANNESS', 'le', '-DL_ENDIAN', '-DB_ENDIAN', d)} \
	-DTERMIO ${FULL_OPTIMIZATION} -Wall"

# -02 does not work on mipsel: ssh hangs when it tries to read /dev/urandom
CFLAG_mtx-1 := "${@'${CFLAG}'.replace('-O2', '')}"
CFLAG_mtx-2 := "${@'${CFLAG}'.replace('-O2', '')}"

export DIRS = "crypto ssl apps"
export EX_LIBS = "-lgcc -ldl"
export AS = "${CC} -c"

PACKAGES =+ "libcrypto libssl ${PN}-misc openssl-conf"
FILES_libcrypto = "${libdir}/libcrypto.so.*"
FILES_libssl = "${libdir}/libssl.so.*"
FILES_${PN}-misc = "${libdir}/ssl/misc"

# Add the openssl.cnf file to the openssl-conf package.  Make the libcrypto
# package RRECOMMENDS on this package.  This will enable the configuration
# file to be installed for both the base openssl package and the libcrypto
# package since the base openssl package depends on the libcrypto package.
FILES_openssl-conf = "${libdir}/ssl/openssl.cnf"
CONFFILES_openssl-conf = "${libdir}/ssl/openssl.cnf"
RRECOMMENDS_libcrypto += "openssl-conf"

do_configure_prepend_darwin () {
	sed -i -e '/version-script=openssl\.ld/d' Configure
}

do_configure () {
	cd util
	perl perlpath.pl ${bindir}
	cd ..
	ln -sf apps/openssl.pod crypto/crypto.pod ssl/ssl.pod doc/

	os=${HOST_OS}
	if [ `echo $os | grep -q linux; echo $?` -eq 0 ]; then
		os=linux
	fi
	target="$os-${HOST_ARCH}"
	case $target in
	linux-arm)
		target=linux-elf-arm
		;;
	linux-armeb)
		target=linux-elf-armeb
		;;
	linux-sh3)
		target=debian-sh3
		;;
	linux-sh4)
		target=debian-sh4
		;;
	linux-i486)
		target=debian-i386-i486
		;;
	linux-i586 | linux-viac3)
		target=debian-i386-i586
		;;
	linux-i686)
		target=debian-i386-i686/cmov
		;;
	linux-mips)
		target=debian-mips
		;;
	linux-mipsel)
		target=debian-mipsel
		;;
	linux-powerpc)
		target=linux-ppc
		;;
	linux-powerpc64)
		target=linux-ppc64
		;;
	linux-supersparc)
		target=linux-sparcv8
		;;
	linux-sparc)
		target=linux-sparcv8
		;;
	darwin-i386)
		target=darwin-i386-cc
		;;
	esac
	# inject machine-specific flags
	sed -i -e "s|^\(\"$target\",\s*\"[^:]\+\):\([^:]\+\)|\1:${CFLAG}|g" Configure
        useprefix=${prefix}
        if [ "x$useprefix" = "x" ]; then
                useprefix=/
        fi        
	perl ./Configure ${EXTRA_OECONF} shared --prefix=$useprefix --openssldir=${libdir}/ssl $target

	eval "${@base_contains('DISTRO_FEATURES', 'largefile', '', 'sed -i -e "/_FILE_OFFSET_BITS/,/#endif/d" ${S}/crypto/bio/bss_file.c', d)}"
	eval "${@base_contains('DISTRO_FEATURES', 'ipv6', '', 'sed -i -e "/AF_INET6/,/break/d" ${S}/crypto/bio/bss_dgram.c', d)}"
}

do_compile () {
	oe_runmake
}

do_install () {
	oe_runmake INSTALL_PREFIX="${D}" install

	# On x86_64, move lib/* to lib64
	if [ "${libdir}" != "${prefix}/lib" ]
	then
		install -d ${D}${libdir} ${D}${libdir}/pkgconfig
		mv ${D}${prefix}/lib/lib* ${D}${libdir}
		mv ${D}${prefix}/lib/pkgconfig/*.pc ${D}${libdir}/pkgconfig
	fi

	oe_libinstall -so libcrypto ${D}${libdir}
	oe_libinstall -so libssl ${D}${libdir}

	install -d ${D}${includedir}
	cp -L -R include/openssl ${D}${includedir}
}

^ permalink raw reply	[flat|nested] 4+ messages in thread