* Relocatable SDK Perl issues
@ 2013-02-18 11:48 Jack Mitchell
2013-02-18 11:50 ` Jack Mitchell
0 siblings, 1 reply; 3+ messages in thread
From: Jack Mitchell @ 2013-02-18 11:48 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
The relocatable SDK seems to have had it's perl issues slipped back in
somewhere.
Running autoreconf -i on my autotools application leads to the following:
Can't locate strict.pm in @INC (@INC contains:
/mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf
/opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/site_perl/5.14.3/
/opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/site_perl/5.14.3
/opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/vendor_perl/5.14.3/
/opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/vendor_perl/5.14.3
/opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/5.14.3/
/opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/5.14.3
/opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/5.14.3
.) at
/mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf/Autom4te/Channels.pm
line 70.
BEGIN failed--compilation aborted at
/mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf/Autom4te/Channels.pm
line 70.
Compilation failed in require at
/mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf/Autom4te/ChannelDefs.pm
line 19.
BEGIN failed--compilation aborted at
/mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf/Autom4te/ChannelDefs.pm
line 19.
Compilation failed in require at
/mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/bin/gnu-configize
line 40.
BEGIN failed--compilation aborted at
/mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/bin/gnu-configize
line 40.
autoreconf: gnu-configize failed with exit status: 2
Any ideas? This was broken a while ago (~6 months), and then was fixed
(~2 months) and it seems to have regressed again somewhere along the way.
--
Jack Mitchell (jack@embed.me.uk)
Embedded Systems Engineer
http://www.embed.me.uk
--
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Relocatable SDK Perl issues
2013-02-18 11:48 Relocatable SDK Perl issues Jack Mitchell
@ 2013-02-18 11:50 ` Jack Mitchell
2013-02-19 21:22 ` Richard Purdie
0 siblings, 1 reply; 3+ messages in thread
From: Jack Mitchell @ 2013-02-18 11:50 UTC (permalink / raw)
To: openembedded-core
On 18/02/13 11:48, Jack Mitchell wrote:
> The relocatable SDK seems to have had it's perl issues slipped back in
> somewhere.
>
> Running autoreconf -i on my autotools application leads to the following:
>
> Can't locate strict.pm in @INC (@INC contains:
> /mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf
> /opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/site_perl/5.14.3/
> /opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/site_perl/5.14.3
> /opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/vendor_perl/5.14.3/
> /opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/vendor_perl/5.14.3
> /opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/5.14.3/
> /opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/5.14.3
> /opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/5.14.3
> .) at
> /mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf/Autom4te/Channels.pm
> line 70.
> BEGIN failed--compilation aborted at
> /mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf/Autom4te/Channels.pm
> line 70.
> Compilation failed in require at
> /mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf/Autom4te/ChannelDefs.pm
> line 19.
> BEGIN failed--compilation aborted at
> /mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf/Autom4te/ChannelDefs.pm
> line 19.
> Compilation failed in require at
> /mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/bin/gnu-configize
> line 40.
> BEGIN failed--compilation aborted at
> /mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/bin/gnu-configize
> line 40.
> autoreconf: gnu-configize failed with exit status: 2
>
> Any ideas? This was broken a while ago (~6 months), and then was fixed
> (~2 months) and it seems to have regressed again somewhere along the way.
>
I see a bug that may be along the same lines here:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=3338
Could anyone confirm it's the same issue, if so; I'll sit quiet :)
--
Jack Mitchell (jack@embed.me.uk)
Embedded Systems Engineer
http://www.embed.me.uk
--
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Relocatable SDK Perl issues
2013-02-18 11:50 ` Jack Mitchell
@ 2013-02-19 21:22 ` Richard Purdie
0 siblings, 0 replies; 3+ messages in thread
From: Richard Purdie @ 2013-02-19 21:22 UTC (permalink / raw)
To: ml; +Cc: openembedded-core
On Mon, 2013-02-18 at 11:50 +0000, Jack Mitchell wrote:
> On 18/02/13 11:48, Jack Mitchell wrote:
> > The relocatable SDK seems to have had it's perl issues slipped back in
> > somewhere.
> >
> > Running autoreconf -i on my autotools application leads to the following:
> >
> > Can't locate strict.pm in @INC (@INC contains:
> > /mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf
> > /opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/site_perl/5.14.3/
> > /opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/site_perl/5.14.3
> > /opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/vendor_perl/5.14.3/
> > /opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/vendor_perl/5.14.3
> > /opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/5.14.3/
> > /opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/5.14.3
> > /opt/dblinux/1.0-20130213/sysroots/x86_64-oecore-linux/usr/lib/perl/5.14.3
> > .) at
> > /mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf/Autom4te/Channels.pm
> > line 70.
> > BEGIN failed--compilation aborted at
> > /mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf/Autom4te/Channels.pm
> > line 70.
> > Compilation failed in require at
> > /mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf/Autom4te/ChannelDefs.pm
> > line 19.
> > BEGIN failed--compilation aborted at
> > /mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/share/autoconf/Autom4te/ChannelDefs.pm
> > line 19.
> > Compilation failed in require at
> > /mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/bin/gnu-configize
> > line 40.
> > BEGIN failed--compilation aborted at
> > /mnt/SSD/r0005sdk/130213r0/sysroots/x86_64-oecore-linux/usr/bin/gnu-configize
> > line 40.
> > autoreconf: gnu-configize failed with exit status: 2
> >
> > Any ideas? This was broken a while ago (~6 months), and then was fixed
> > (~2 months) and it seems to have regressed again somewhere along the way.
> >
>
> I see a bug that may be along the same lines here:
> https://bugzilla.yoctoproject.org/show_bug.cgi?id=3338
>
> Could anyone confirm it's the same issue, if so; I'll sit quiet :)
Its probably related, hard to tell for sure. It would be good if we
could get this resolved.
Cheers,
Richard
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-02-19 21:38 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-02-18 11:48 Relocatable SDK Perl issues Jack Mitchell
2013-02-18 11:50 ` Jack Mitchell
2013-02-19 21:22 ` Richard Purdie
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox