* Why doesn't my package rebuild
@ 2013-05-16 21:10 Gary Thomas
2013-05-17 15:29 ` William M.A. Traynor
0 siblings, 1 reply; 3+ messages in thread
From: Gary Thomas @ 2013-05-16 21:10 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
Sort of as a follow up to my problem of yesterday, I've run into
a problem - I have a simple recipe which only unpacks a source tarball
and then installs it - no other steps are listed or required. The recipe
also does not have an explicit PR value and I'm not running a PR server.
If I have the package built, then change the tarball and the checksums
in the recipe itself, it does not get rebuilt :-( I have to force it
using cleansstate.
This setup seems to work fine for my other recipes. I just tried it
with two nearly identical recipes. I made similar changes in both
recipes/files - one was rebuilt, the other not.
How can I diagnose this? It's a private recipe (no use to anyone but me)
so I'm not going to send it to the list but I can gladly share it with
anyone who might be able to help.
Thanks
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Why doesn't my package rebuild
2013-05-16 21:10 Why doesn't my package rebuild Gary Thomas
@ 2013-05-17 15:29 ` William M.A. Traynor
2013-05-17 19:02 ` Gary Thomas
0 siblings, 1 reply; 3+ messages in thread
From: William M.A. Traynor @ 2013-05-17 15:29 UTC (permalink / raw)
To: Gary Thomas; +Cc: Patches and discussions about the oe-core layer
On Thu, May 16, 2013 at 5:10 PM, Gary Thomas <gary@mlbassoc.com> wrote:
> Sort of as a follow up to my problem of yesterday, I've run into
> a problem - I have a simple recipe which only unpacks a source tarball
> and then installs it - no other steps are listed or required. The recipe
> also does not have an explicit PR value and I'm not running a PR server.
>
> If I have the package built, then change the tarball and the checksums
> in the recipe itself, it does not get rebuilt :-( I have to force it
> using cleansstate.
>
> This setup seems to work fine for my other recipes. I just tried it
> with two nearly identical recipes. I made similar changes in both
> recipes/files - one was rebuilt, the other not.
>
> How can I diagnose this? It's a private recipe (no use to anyone but me)
> so I'm not going to send it to the list but I can gladly share it with
> anyone who might be able to help.
Hi Gary,
You can increase the Debug level for your build with bitbake -D. You
can specify this more than once for additional output, example: -DDD.
This may help you to diagnose what's going on.
>
> Thanks
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Why doesn't my package rebuild
2013-05-17 15:29 ` William M.A. Traynor
@ 2013-05-17 19:02 ` Gary Thomas
0 siblings, 0 replies; 3+ messages in thread
From: Gary Thomas @ 2013-05-17 19:02 UTC (permalink / raw)
To: William M.A. Traynor; +Cc: Patches and discussions about the oe-core layer
On 2013-05-17 09:29, William M.A. Traynor wrote:
> On Thu, May 16, 2013 at 5:10 PM, Gary Thomas <gary@mlbassoc.com> wrote:
>> Sort of as a follow up to my problem of yesterday, I've run into
>> a problem - I have a simple recipe which only unpacks a source tarball
>> and then installs it - no other steps are listed or required. The recipe
>> also does not have an explicit PR value and I'm not running a PR server.
>>
>> If I have the package built, then change the tarball and the checksums
>> in the recipe itself, it does not get rebuilt :-( I have to force it
>> using cleansstate.
>>
>> This setup seems to work fine for my other recipes. I just tried it
>> with two nearly identical recipes. I made similar changes in both
>> recipes/files - one was rebuilt, the other not.
>>
>> How can I diagnose this? It's a private recipe (no use to anyone but me)
>> so I'm not going to send it to the list but I can gladly share it with
>> anyone who might be able to help.
>
> Hi Gary,
>
> You can increase the Debug level for your build with bitbake -D. You
> can specify this more than once for additional output, example: -DDD.
> This may help you to diagnose what's going on.
Thanks, that was the hint I was looking for.
Of course, today the recipe behaves... At least I'll know what to
do the next time I have problems.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-05-17 19:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-05-16 21:10 Why doesn't my package rebuild Gary Thomas
2013-05-17 15:29 ` William M.A. Traynor
2013-05-17 19:02 ` Gary Thomas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox