* Re: re. Enabling x264 support in gstreamer
[not found] <CAH2s=tsyyTMO9KoJMfP0SS4x0vMLphYuDWhPEv0eWeui3CjJ1w@mail.gmail.com>
@ 2013-09-16 22:22 ` Gary Thomas
2013-09-16 22:32 ` Burton, Ross
0 siblings, 1 reply; 3+ messages in thread
From: Gary Thomas @ 2013-09-16 22:22 UTC (permalink / raw)
To: Tim Biernat; +Cc: Patches and discussions about the oe-core layer
[-- Attachment #1: Type: text/plain, Size: 878 bytes --]
On 2013-09-16 16:09, Tim Biernat wrote:
> Just wondering if you got this working? I am trying to build gstreamer with h.264 support on Intel n450 for some time now without success.
Firstly, since this message was on a public email list, it's polite
to keep the discussion there so that everyone benefits.
Also, not quoting any of the previous message makes it very difficult
to follow up - you can't imagine how many emails I've written since
that one which was a month ago...
I did indeed get it working by using the attached .bbappend file.
Actually pretty simple, I hope that the documentation on PACKAGECONFIG
catches up soon.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
[-- Attachment #2: gst-plugins-ugly_0.10.19.bbappend --]
[-- Type: text/plain, Size: 136 bytes --]
#
# Adjust desired plugins which are not in Poky/Yocto because of licensing requirements
#
DEPENDS += " x264 "
PACKAGECONFIG += "x264"
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: re. Enabling x264 support in gstreamer
2013-09-16 22:22 ` re. Enabling x264 support in gstreamer Gary Thomas
@ 2013-09-16 22:32 ` Burton, Ross
2013-09-17 10:59 ` Gary Thomas
0 siblings, 1 reply; 3+ messages in thread
From: Burton, Ross @ 2013-09-16 22:32 UTC (permalink / raw)
To: Gary Thomas; +Cc: Tim Biernat, Patches and discussions about the oe-core layer
On 16 September 2013 23:22, Gary Thomas <gary@mlbassoc.com> wrote:
> I did indeed get it working by using the attached .bbappend file.
> Actually pretty simple, I hope that the documentation on PACKAGECONFIG
> catches up soon.
You don't need the DEPENDS line, the x264 stana specifies that for you.
I presume you're refering to something like a worked example of how to
use PACKAGECONFIG instead of just a reference? You should file a bug
about that - there's a never-ending amount for Scott to document so
pointers for obvious gaps are always welcomed.
Ross
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: re. Enabling x264 support in gstreamer
2013-09-16 22:32 ` Burton, Ross
@ 2013-09-17 10:59 ` Gary Thomas
0 siblings, 0 replies; 3+ messages in thread
From: Gary Thomas @ 2013-09-17 10:59 UTC (permalink / raw)
To: Burton, Ross; +Cc: Patches and discussions about the oe-core layer
On 2013-09-16 16:32, Burton, Ross wrote:
> On 16 September 2013 23:22, Gary Thomas <gary@mlbassoc.com> wrote:
>> I did indeed get it working by using the attached .bbappend file.
>> Actually pretty simple, I hope that the documentation on PACKAGECONFIG
>> catches up soon.
>
> You don't need the DEPENDS line, the x264 stana specifies that for you.
Thanks, I missed that.
>
> I presume you're refering to something like a worked example of how to
> use PACKAGECONFIG instead of just a reference? You should file a bug
> about that - there's a never-ending amount for Scott to document so
> pointers for obvious gaps are always welcomed.
Done - bug #5214
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-09-17 10:58 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CAH2s=tsyyTMO9KoJMfP0SS4x0vMLphYuDWhPEv0eWeui3CjJ1w@mail.gmail.com>
2013-09-16 22:22 ` re. Enabling x264 support in gstreamer Gary Thomas
2013-09-16 22:32 ` Burton, Ross
2013-09-17 10:59 ` Gary Thomas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox