Openembedded Core Discussions
 help / color / mirror / Atom feed
From: Paul Barker <paul@pbarker.dev>
To: Junjie Cao <junjie.cao@linux.dev>,
	 openembedded-core@lists.openembedded.org
Subject: Re: [OE-core][PATCH v3 1/9] cve-exclusions: set status for CVE-2019-14899
Date: Sun, 16 Aug 2026 16:50:39 +0100	[thread overview]
Message-ID: <5349c5a65816faec9fdc46092e46a13816a32a70.camel@pbarker.dev> (raw)
In-Reply-To: <20260812072842.1176341-2-junjie.cao@linux.dev>

On Wed, 2026-08-12 at 02:28 -0500, Junjie Cao wrote:
> A network-adjacent attacker can send packets addressed to a host's VPN
> tunnel address over the physical interface. Because Linux uses the weak
> host model by default, the host replies, which lets the attacker infer
> the tunnel address, confirm active connections and eventually inject
> into the tunneled TCP stream.
> 
> No upstream kernel fix exists. The disclosure notes that reverse path
> filtering is not a complete solution because the attack also works over
> IPv6, which has no rp_filter; the mitigation that shipped was a firewall
> rule added to wg-quick(8) in userspace:

We should drop the discussion of mitigations here - none of them are
complete mitigations and there are more nuances.

> 
>   https://www.openwall.com/lists/oss-security/2019/12/05/1
>   https://lore.kernel.org/all/20191205191318.GA44156@zx2c4.com/
> 
> Distribution trackers record the same state: Ubuntu has it deferred
> since 2019-12-13, Debian does not track it against the kernel, and Red
> Hat scopes it to openvpn:
> 
>   https://ubuntu.com/security/CVE-2019-14899
>   https://security-tracker.debian.org/tracker/CVE-2019-14899
> 
> Record it unpatched so it stays visible rather than excluded.
> 
> CC: Paul Barker <paul@pbarker.dev>
> AI-Generated: Uses Claude (claude-opus-5)
> Signed-off-by: Junjie Cao <junjie.cao@linux.dev>
> ---
> v3:
> - use "unpatched" instead of "upstream-wontfix": there is no upstream
>   statement, only distribution and disclosure sources
> 
> v2: https://lore.kernel.org/openembedded-core/20260803084827.1348810-1-junjie.cao@linux.dev/
> 
>  meta/recipes-kernel/linux/cve-exclusion.inc | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/meta/recipes-kernel/linux/cve-exclusion.inc b/meta/recipes-kernel/linux/cve-exclusion.inc
> index d27d764..5ed4a00 100644
> --- a/meta/recipes-kernel/linux/cve-exclusion.inc
> +++ b/meta/recipes-kernel/linux/cve-exclusion.inc
> @@ -192,3 +192,10 @@ CVE_STATUS[CVE-2025-68195] = "fixed-version: Fixed from 6.18"
>  # Fix https://git.kernel.org/stable/c/b4b64fda4d30a83a7f00e92a0c8a1d47699609f3
>  # Backport https://git.kernel.org/stable/c/75c5d9bce072abbbc09b701a49869ac23c34a906
>  CVE_STATUS[CVE-2025-71145] = "cpe-stable-backport: Fixed from v6.18.3"
> +
> +# Consequence of the default weak host model, not a specific defect;
> +# mitigation is firewall configuration only (rp_filter for IPv4, a
> +# strong host model rule such as wg-quick(8)'s, which also covers IPv6).
> +# https://ubuntu.com/security/CVE-2019-14899
> +CVE_STATUS[CVE-2019-14899] = "unpatched: consequence of the default weak \
> +host model, no upstream kernel fix, mitigated by firewall configuration"

I recommend slightly different wording. Include the triage date, drop
discussion of mitigation.

    # Triaged August 2026 - no upstream fix, Ubuntu fix deferred
    # https://ubuntu.com/security/CVE-2019-14899
    CVE_STATUS[CVE-2019-14899] = "unpatched: Consequence of the default weak host \
    model, no upstream fix"

Best regards,

-- 
Paul Barker



  reply	other threads:[~2026-08-16 15:50 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-12  7:28 [OE-core][PATCH v3 0/9] cve-exclusions: triage nine kernel CVEs lacking upstream fix data Junjie Cao
2026-08-12  7:28 ` [OE-core][PATCH v3 1/9] cve-exclusions: set status for CVE-2019-14899 Junjie Cao
2026-08-16 15:50   ` Paul Barker [this message]
2026-08-12  7:28 ` [OE-core][PATCH v3 2/9] cve-exclusions: set status for CVE-2021-3714 Junjie Cao
2026-08-16 15:53   ` Paul Barker
2026-08-12  7:28 ` [OE-core][PATCH v3 3/9] cve-exclusions: set status for CVE-2021-3864 Junjie Cao
2026-08-16 15:55   ` Paul Barker
2026-08-12  7:28 ` [OE-core][PATCH v3 4/9] cve-exclusions: set status for CVE-2022-0400 Junjie Cao
2026-08-16 16:35   ` Paul Barker
2026-08-12  7:28 ` [OE-core][PATCH v3 5/9] cve-exclusions: set status for CVE-2022-1247 Junjie Cao
2026-08-16 16:21   ` Paul Barker
2026-08-12  7:28 ` [OE-core][PATCH v3 6/9] cve-exclusions: set status for CVE-2022-4543 Junjie Cao
2026-08-16 16:00   ` Paul Barker
2026-08-12  7:28 ` [OE-core][PATCH v3 7/9] cve-exclusions: set status for CVE-2023-3397 Junjie Cao
2026-08-16 16:05   ` Paul Barker
2026-08-12  7:28 ` [OE-core][PATCH v3 8/9] cve-exclusions: set status for CVE-2023-6238 Junjie Cao
2026-08-16 16:11   ` Paul Barker
2026-08-12  7:28 ` [OE-core][PATCH v3 9/9] cve-exclusions: set status for CVE-2023-6240 Junjie Cao
2026-08-16 16:14   ` Paul Barker
2026-08-16 16:39 ` [OE-core][PATCH v3 0/9] cve-exclusions: triage nine kernel CVEs lacking upstream fix data Paul Barker
2026-08-19 10:43   ` Junjie Cao
2026-08-24  4:13     ` Junjie Cao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5349c5a65816faec9fdc46092e46a13816a32a70.camel@pbarker.dev \
    --to=paul@pbarker.dev \
    --cc=junjie.cao@linux.dev \
    --cc=openembedded-core@lists.openembedded.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox