* [PATCHv3 0/2] init fixes @ 2015-03-19 10:52 Aníbal Limón 2015-03-19 10:52 ` [PATCHv3 1/2] sysvinit-inittab: Fix no tty in runlevel 1 Aníbal Limón 2015-03-19 10:52 ` [PATCHv3 2/2] initscripts: Add changetodefaultvt for 1, 2, 3, 4 runlevels Aníbal Limón 0 siblings, 2 replies; 6+ messages in thread From: Aníbal Limón @ 2015-03-19 10:52 UTC (permalink / raw) To: openembedded-core The next changes fixes issues related to [YOCTO #5336]. This v3 adds conditional installing of changetodefaultvt.sh into patch for initscripts. The following changes since commit df0672b038e6942c97d266af9ca175a06f2b0423: bitbake: toaster: Fix the orderkey to match the column (2015-03-16 17:44:13 +0000) are available in the git repository at: git://git.yoctoproject.org/poky-contrib alimon/init_fixes http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=alimon/init_fixes Aníbal Limón (2): sysvinit-inittab: Fix no tty in runlevel 1. initscripts: Add changetodefaultvt for 1, 2, 3, 4 runlevels .../initscripts/initscripts-1.0/changetodefaultvt.sh | 10 ++++++++++ meta/recipes-core/initscripts/initscripts_1.0.bb | 8 ++++++++ meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb | 2 +- 3 files changed, 19 insertions(+), 1 deletion(-) create mode 100755 meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh -- 1.8.4.5 ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCHv3 1/2] sysvinit-inittab: Fix no tty in runlevel 1. 2015-03-19 10:52 [PATCHv3 0/2] init fixes Aníbal Limón @ 2015-03-19 10:52 ` Aníbal Limón 2015-03-19 10:52 ` [PATCHv3 2/2] initscripts: Add changetodefaultvt for 1, 2, 3, 4 runlevels Aníbal Limón 1 sibling, 0 replies; 6+ messages in thread From: Aníbal Limón @ 2015-03-19 10:52 UTC (permalink / raw) To: openembedded-core When switch to runlevel 1 (Single user mode), tty was not re-spawn and appears to be a machine hang. [YOCTO #5336] Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> --- meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb b/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb index eed2104..e087f0f 100644 --- a/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb +++ b/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb @@ -41,7 +41,7 @@ EOF for n in ${SYSVINIT_ENABLED_GETTYS} do - echo "$n:2345:respawn:${base_sbindir}/getty 38400 tty$n" >> ${D}${sysconfdir}/inittab + echo "$n:12345:respawn:${base_sbindir}/getty 38400 tty$n" >> ${D}${sysconfdir}/inittab done echo "" >> ${D}${sysconfdir}/inittab fi -- 1.8.4.5 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCHv3 2/2] initscripts: Add changetodefaultvt for 1, 2, 3, 4 runlevels 2015-03-19 10:52 [PATCHv3 0/2] init fixes Aníbal Limón 2015-03-19 10:52 ` [PATCHv3 1/2] sysvinit-inittab: Fix no tty in runlevel 1 Aníbal Limón @ 2015-03-19 10:52 ` Aníbal Limón 2015-03-19 19:04 ` Otavio Salvador 1 sibling, 1 reply; 6+ messages in thread From: Aníbal Limón @ 2015-03-19 10:52 UTC (permalink / raw) To: openembedded-core When change between runlevel 5 to another non-graphic runlevel the console stays in the tty where X was launched. This patchs add a default switch to tty1. [YOCTO #5336] Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> --- .../initscripts/initscripts-1.0/changetodefaultvt.sh | 10 ++++++++++ meta/recipes-core/initscripts/initscripts_1.0.bb | 8 ++++++++ 2 files changed, 18 insertions(+) create mode 100755 meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh diff --git a/meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh b/meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh new file mode 100755 index 0000000..bbef7ed --- /dev/null +++ b/meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh @@ -0,0 +1,10 @@ +#!/bin/sh +### BEGIN INIT INFO +# Provides: changetodefaultvt +# Required-Start: +# Required-Stop: +# Default-Start: 1 2 3 4 +# Default-Stop: +### END INIT INFO + +chvt 1 diff --git a/meta/recipes-core/initscripts/initscripts_1.0.bb b/meta/recipes-core/initscripts/initscripts_1.0.bb index dfb75b2..177ab90 100644 --- a/meta/recipes-core/initscripts/initscripts_1.0.bb +++ b/meta/recipes-core/initscripts/initscripts_1.0.bb @@ -33,6 +33,7 @@ SRC_URI = "file://functions \ file://GPLv2.patch \ file://dmesg.sh \ file://logrotate-dmesg.conf \ + file://changetodefaultvt.sh \ " S = "${WORKDIR}" @@ -100,6 +101,9 @@ do_install () { install -m 0644 ${WORKDIR}/volatiles ${D}${sysconfdir}/default/volatiles/00_core install -m 0755 ${WORKDIR}/dmesg.sh ${D}${sysconfdir}/init.d install -m 0644 ${WORKDIR}/logrotate-dmesg.conf ${D}${sysconfdir}/ + if ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'true', 'false', d)}; then + install -m 0755 ${WORKDIR}/changetodefaultvt.sh ${D}${sysconfdir}/init.d + fi if [ "${TARGET_ARCH}" = "arm" ]; then install -m 0755 ${WORKDIR}/alignment.sh ${D}${sysconfdir}/init.d @@ -112,6 +116,10 @@ do_install () { # # Create runlevel links # + if ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'true', 'false', d)}; then + update-rc.d -r ${D} changetodefaultvt.sh start 99 1 2 3 4 . + fi + update-rc.d -r ${D} rmnologin.sh start 99 2 3 4 5 . update-rc.d -r ${D} sendsigs start 20 0 6 . update-rc.d -r ${D} urandom start 30 S 0 6 . -- 1.8.4.5 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCHv3 2/2] initscripts: Add changetodefaultvt for 1, 2, 3, 4 runlevels 2015-03-19 10:52 ` [PATCHv3 2/2] initscripts: Add changetodefaultvt for 1, 2, 3, 4 runlevels Aníbal Limón @ 2015-03-19 19:04 ` Otavio Salvador 2015-03-19 19:09 ` Aníbal Limón 0 siblings, 1 reply; 6+ messages in thread From: Otavio Salvador @ 2015-03-19 19:04 UTC (permalink / raw) To: Aníbal Limón; +Cc: Patches and discussions about the oe-core layer On Thu, Mar 19, 2015 at 7:52 AM, Aníbal Limón <anibal.limon@linux.intel.com> wrote: > When change between runlevel 5 to another non-graphic runlevel > the console stays in the tty where X was launched. > > This patchs add a default switch to tty1. > > [YOCTO #5336] > > Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> > --- > .../initscripts/initscripts-1.0/changetodefaultvt.sh | 10 ++++++++++ > meta/recipes-core/initscripts/initscripts_1.0.bb | 8 ++++++++ > 2 files changed, 18 insertions(+) > create mode 100755 meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh > > diff --git a/meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh b/meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh > new file mode 100755 > index 0000000..bbef7ed > --- /dev/null > +++ b/meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh > @@ -0,0 +1,10 @@ > +#!/bin/sh > +### BEGIN INIT INFO > +# Provides: changetodefaultvt > +# Required-Start: > +# Required-Stop: > +# Default-Start: 1 2 3 4 > +# Default-Stop: > +### END INIT INFO > + > +chvt 1 You didn't answer the question. How general use distros are handling this? It seems hackish! > diff --git a/meta/recipes-core/initscripts/initscripts_1.0.bb b/meta/recipes-core/initscripts/initscripts_1.0.bb > index dfb75b2..177ab90 100644 > --- a/meta/recipes-core/initscripts/initscripts_1.0.bb > +++ b/meta/recipes-core/initscripts/initscripts_1.0.bb > @@ -33,6 +33,7 @@ SRC_URI = "file://functions \ > file://GPLv2.patch \ > file://dmesg.sh \ > file://logrotate-dmesg.conf \ > + file://changetodefaultvt.sh \ > " > > S = "${WORKDIR}" > @@ -100,6 +101,9 @@ do_install () { > install -m 0644 ${WORKDIR}/volatiles ${D}${sysconfdir}/default/volatiles/00_core > install -m 0755 ${WORKDIR}/dmesg.sh ${D}${sysconfdir}/init.d > install -m 0644 ${WORKDIR}/logrotate-dmesg.conf ${D}${sysconfdir}/ > + if ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'true', 'false', d)}; then > + install -m 0755 ${WORKDIR}/changetodefaultvt.sh ${D}${sysconfdir}/init.d > + fi > > if [ "${TARGET_ARCH}" = "arm" ]; then > install -m 0755 ${WORKDIR}/alignment.sh ${D}${sysconfdir}/init.d > @@ -112,6 +116,10 @@ do_install () { > # > # Create runlevel links > # > + if ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'true', 'false', d)}; then > + update-rc.d -r ${D} changetodefaultvt.sh start 99 1 2 3 4 . > + fi > + > update-rc.d -r ${D} rmnologin.sh start 99 2 3 4 5 . > update-rc.d -r ${D} sendsigs start 20 0 6 . > update-rc.d -r ${D} urandom start 30 S 0 6 . > -- > 1.8.4.5 > > -- > _______________________________________________ > Openembedded-core mailing list > Openembedded-core@lists.openembedded.org > http://lists.openembedded.org/mailman/listinfo/openembedded-core -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCHv3 2/2] initscripts: Add changetodefaultvt for 1, 2, 3, 4 runlevels 2015-03-19 19:04 ` Otavio Salvador @ 2015-03-19 19:09 ` Aníbal Limón 2015-03-19 19:20 ` Otavio Salvador 0 siblings, 1 reply; 6+ messages in thread From: Aníbal Limón @ 2015-03-19 19:09 UTC (permalink / raw) To: Otavio Salvador; +Cc: Patches and discussions about the oe-core layer Hi, On 19/03/15 13:04, Otavio Salvador wrote: > On Thu, Mar 19, 2015 at 7:52 AM, Aníbal Limón > <anibal.limon@linux.intel.com> wrote: >> When change between runlevel 5 to another non-graphic runlevel >> the console stays in the tty where X was launched. >> >> This patchs add a default switch to tty1. >> >> [YOCTO #5336] >> >> Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> >> --- >> .../initscripts/initscripts-1.0/changetodefaultvt.sh | 10 ++++++++++ >> meta/recipes-core/initscripts/initscripts_1.0.bb | 8 ++++++++ >> 2 files changed, 18 insertions(+) >> create mode 100755 meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh >> >> diff --git a/meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh b/meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh >> new file mode 100755 >> index 0000000..bbef7ed >> --- /dev/null >> +++ b/meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh >> @@ -0,0 +1,10 @@ >> +#!/bin/sh >> +### BEGIN INIT INFO >> +# Provides: changetodefaultvt >> +# Required-Start: >> +# Required-Stop: >> +# Default-Start: 1 2 3 4 >> +# Default-Stop: >> +### END INIT INFO >> + >> +chvt 1 > You didn't answer the question. How general use distros are handling > this? It seems hackish! Yes, its like hackish this is handled by display manager but we don't have one in sato. I think it need to by installed by xserver-nodm-init instead of here. I'll send another version. alimon > >> diff --git a/meta/recipes-core/initscripts/initscripts_1.0.bb b/meta/recipes-core/initscripts/initscripts_1.0.bb >> index dfb75b2..177ab90 100644 >> --- a/meta/recipes-core/initscripts/initscripts_1.0.bb >> +++ b/meta/recipes-core/initscripts/initscripts_1.0.bb >> @@ -33,6 +33,7 @@ SRC_URI = "file://functions \ >> file://GPLv2.patch \ >> file://dmesg.sh \ >> file://logrotate-dmesg.conf \ >> + file://changetodefaultvt.sh \ >> " >> >> S = "${WORKDIR}" >> @@ -100,6 +101,9 @@ do_install () { >> install -m 0644 ${WORKDIR}/volatiles ${D}${sysconfdir}/default/volatiles/00_core >> install -m 0755 ${WORKDIR}/dmesg.sh ${D}${sysconfdir}/init.d >> install -m 0644 ${WORKDIR}/logrotate-dmesg.conf ${D}${sysconfdir}/ >> + if ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'true', 'false', d)}; then >> + install -m 0755 ${WORKDIR}/changetodefaultvt.sh ${D}${sysconfdir}/init.d >> + fi >> >> if [ "${TARGET_ARCH}" = "arm" ]; then >> install -m 0755 ${WORKDIR}/alignment.sh ${D}${sysconfdir}/init.d >> @@ -112,6 +116,10 @@ do_install () { >> # >> # Create runlevel links >> # >> + if ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'true', 'false', d)}; then >> + update-rc.d -r ${D} changetodefaultvt.sh start 99 1 2 3 4 . >> + fi >> + >> update-rc.d -r ${D} rmnologin.sh start 99 2 3 4 5 . >> update-rc.d -r ${D} sendsigs start 20 0 6 . >> update-rc.d -r ${D} urandom start 30 S 0 6 . >> -- >> 1.8.4.5 >> >> -- >> _______________________________________________ >> Openembedded-core mailing list >> Openembedded-core@lists.openembedded.org >> http://lists.openembedded.org/mailman/listinfo/openembedded-core > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCHv3 2/2] initscripts: Add changetodefaultvt for 1, 2, 3, 4 runlevels 2015-03-19 19:09 ` Aníbal Limón @ 2015-03-19 19:20 ` Otavio Salvador 0 siblings, 0 replies; 6+ messages in thread From: Otavio Salvador @ 2015-03-19 19:20 UTC (permalink / raw) To: Aníbal Limón; +Cc: Patches and discussions about the oe-core layer On Thu, Mar 19, 2015 at 4:09 PM, Aníbal Limón <anibal.limon@linux.intel.com> wrote: > Hi, > > > On 19/03/15 13:04, Otavio Salvador wrote: >> >> On Thu, Mar 19, 2015 at 7:52 AM, Aníbal Limón >> <anibal.limon@linux.intel.com> wrote: >>> >>> When change between runlevel 5 to another non-graphic runlevel >>> the console stays in the tty where X was launched. >>> >>> This patchs add a default switch to tty1. >>> >>> [YOCTO #5336] >>> >>> Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> >>> --- >>> .../initscripts/initscripts-1.0/changetodefaultvt.sh | 10 >>> ++++++++++ >>> meta/recipes-core/initscripts/initscripts_1.0.bb | 8 >>> ++++++++ >>> 2 files changed, 18 insertions(+) >>> create mode 100755 >>> meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh >>> >>> diff --git >>> a/meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh >>> b/meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh >>> new file mode 100755 >>> index 0000000..bbef7ed >>> --- /dev/null >>> +++ b/meta/recipes-core/initscripts/initscripts-1.0/changetodefaultvt.sh >>> @@ -0,0 +1,10 @@ >>> +#!/bin/sh >>> +### BEGIN INIT INFO >>> +# Provides: changetodefaultvt >>> +# Required-Start: >>> +# Required-Stop: >>> +# Default-Start: 1 2 3 4 >>> +# Default-Stop: >>> +### END INIT INFO >>> + >>> +chvt 1 >> >> You didn't answer the question. How general use distros are handling >> this? It seems hackish! > > Yes, its like hackish this is handled by display manager but we don't have > one in sato. > > I think it need to by installed by xserver-nodm-init instead of here. I'll > send another version. Now it starts to make some sense. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-03-19 19:20 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-03-19 10:52 [PATCHv3 0/2] init fixes Aníbal Limón 2015-03-19 10:52 ` [PATCHv3 1/2] sysvinit-inittab: Fix no tty in runlevel 1 Aníbal Limón 2015-03-19 10:52 ` [PATCHv3 2/2] initscripts: Add changetodefaultvt for 1, 2, 3, 4 runlevels Aníbal Limón 2015-03-19 19:04 ` Otavio Salvador 2015-03-19 19:09 ` Aníbal Limón 2015-03-19 19:20 ` Otavio Salvador
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox