Re: Aarch64 u-boot with gcc .5x

[akuster808 <akuster808@gmail.com>]

On 03/28/2016 02:17 PM, Otavio Salvador wrote:
> On Mon, Mar 28, 2016 at 5:52 PM, akuster808 <akuster808@gmail.com> wrote:
>> On 03/28/2016 11:20 AM, Otavio Salvador wrote:
>>> On Mon, Mar 28, 2016 at 12:51 PM, akuster808 <akuster808@gmail.com> wrote:
>>>> I have an arm64 odroid c2 board.  If I build u-boot with the current OE
>>>> 5.3 gcc it hangs at kernel load time. If I use 4.9 gcc it works fine. A
>>>> 5.3 built kernel boots fine with a 4.9 built u-boot.
>>>>
>>>> The vendor supplied u-boot is hacked up and am leaning it that direction
>>>> as the culprit so I am looking for data points.
>>>>
>>>> Is anyone using a current u-boot with 5.3 gcc on an arm64 machine? if
>>>> so, any special tweaks to get that combo to work?
>>>
>>> I am using one ARM 64 SoC with GCC 5.2 at this moment and it works
>>> fine. What U-Boot version is the fork based on?
>>
>> 2015.01
> 
> Please try to use GCC 5.2 and see if it makes any difference. The BSP
> I am referring to is currently using it and it is working fine.
> 
> The forked version is the same. Of course, it may have changes which
> hides or solve the issue but it is a hint anyway.
ok. will try this next.

kind regards,
Armin