* [PATCH 1/2] systemd-boot: Completely replaces gummiboot with systemd-boot
[not found] <cover.1479942307.git.alejandro.hernandez@linux.intel.com>
@ 2016-11-23 23:08 ` Alejandro Hernandez
2016-11-23 23:08 ` [PATCH 2/2] Remove old gummiboot recipe, class and wks file Alejandro Hernandez
1 sibling, 0 replies; 2+ messages in thread
From: Alejandro Hernandez @ 2016-11-23 23:08 UTC (permalink / raw)
To: openembedded-core
After systemd-boot was introduced, its been tested for a while with no major
issues being found until now, this patch completely replaces all gummiboot
instances with systemd-boot ones, taking the next step into cleaning
up systemd-boot/gummiboot.
[YOCTO #10332]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
---
meta/classes/fs-uuid.bbclass | 2 +-
meta/classes/systemd-boot.bbclass | 4 +---
meta/conf/distro/include/distro_alias.inc | 2 +-
meta/lib/oeqa/controllers/masterimage.py | 4 ++--
meta/lib/oeqa/selftest/wic.py | 6 ++---
meta/recipes-bsp/systemd-boot/systemd-boot.bb | 2 +-
.../initrdscripts/files/init-install-efi-testfs.sh | 12 +++++-----
.../initrdscripts/files/init-install-efi.sh | 12 +++++-----
scripts/contrib/mkefidisk.sh | 26 +++++++++++-----------
scripts/lib/wic/plugins/source/bootimg-efi.py | 22 +++++++++---------
10 files changed, 44 insertions(+), 48 deletions(-)
diff --git a/meta/classes/fs-uuid.bbclass b/meta/classes/fs-uuid.bbclass
index bd2613c..1d5d0c3 100644
--- a/meta/classes/fs-uuid.bbclass
+++ b/meta/classes/fs-uuid.bbclass
@@ -13,7 +13,7 @@ def get_rootfs_uuid(d):
bb.fatal('Could not determine filesystem UUID of %s' % rootfs)
# Replace the special <<uuid-of-rootfs>> inside a string (like the
-# root= APPEND string in a syslinux.cfg or gummiboot entry) with the
+# root= APPEND string in a syslinux.cfg or systemd-boot entry) with the
# actual UUID of the rootfs. Does nothing if the special string
# is not used.
def replace_rootfs_uuid(d, string):
diff --git a/meta/classes/systemd-boot.bbclass b/meta/classes/systemd-boot.bbclass
index 05244c7..3398218 100644
--- a/meta/classes/systemd-boot.bbclass
+++ b/meta/classes/systemd-boot.bbclass
@@ -4,9 +4,7 @@
# systemd-boot.bbclass - The "systemd-boot" is essentially the gummiboot merged into systemd.
# The original standalone gummiboot project is dead without any more
-# maintenance. As a start point, we replace all gummitboot occurrences
-# with systemd-boot in gummiboot.bbclass to have a base version of this
-# systemd-boot.bbclass.
+# maintenance.
#
# Set EFI_PROVIDER = "systemd-boot" to use systemd-boot on your live images instead of grub-efi
# (images built by image-live.bbclass or image-vm.bbclass)
diff --git a/meta/conf/distro/include/distro_alias.inc b/meta/conf/distro/include/distro_alias.inc
index 10efb09..9c82854 100644
--- a/meta/conf/distro/include/distro_alias.inc
+++ b/meta/conf/distro/include/distro_alias.inc
@@ -135,7 +135,7 @@ DISTRO_PN_ALIAS_pn-gtk-doc = "Fedora=gtk-doc Ubuntu=gtk-doc"
DISTRO_PN_ALIAS_pn-gtk-engines = "Fedora=gtk2-engines OpenSuSE=gtk2-engines Ubuntu=gtk2-engines Mandriva=gtk-engines2 Debian=gtk2-engines"
DISTRO_PN_ALIAS_pn-gtk-sato-engine = "OpenedHand"
DISTRO_PN_ALIAS_pn-gtk-icon-utils-native = "OSPDT"
-DISTRO_PN_ALIAS_pn-gummiboot = "Debian=gummiboot Fedora=gummiboot"
+DISTRO_PN_ALIAS_pn-systemd-boot = "Ubuntu=systemd-boot Fedora=systemd-boot"
DISTRO_PN_ALIAS_pn-hello-mod = "OE-Core"
DISTRO_PN_ALIAS_pn-hostap-conf = "OE-Core"
DISTRO_PN_ALIAS_pn-hwlatdetect = "OSPDT"
diff --git a/meta/lib/oeqa/controllers/masterimage.py b/meta/lib/oeqa/controllers/masterimage.py
index 9ce3bf8..7fcbb6d 100644
--- a/meta/lib/oeqa/controllers/masterimage.py
+++ b/meta/lib/oeqa/controllers/masterimage.py
@@ -159,10 +159,10 @@ class MasterImageHardwareTarget(oeqa.targetcontrol.BaseTarget, metaclass=ABCMeta
self.power_cycle(self.connection)
-class GummibootTarget(MasterImageHardwareTarget):
+class SystemdbootTarget(MasterImageHardwareTarget):
def __init__(self, d):
- super(GummibootTarget, self).__init__(d)
+ super(SystemdbootTarget, self).__init__(d)
# this the value we need to set in the LoaderEntryOneShot EFI variable
# so the system boots the 'test' bootloader label and not the default
# The first four bytes are EFI bits, and the rest is an utf-16le string
diff --git a/meta/lib/oeqa/selftest/wic.py b/meta/lib/oeqa/selftest/wic.py
index faac11e..61081cc 100644
--- a/meta/lib/oeqa/selftest/wic.py
+++ b/meta/lib/oeqa/selftest/wic.py
@@ -243,9 +243,9 @@ class Wic(oeSelfTest):
self.assertEqual(1, len(glob(self.resultdir + "%s-*direct" % image)))
@testcase(1349)
- def test_mkgummidisk(self):
- """Test creation of mkgummidisk image"""
- image = "mkgummidisk"
+ def test_systemd-bootdisk(self):
+ """Test creation of systemd-bootdisk image"""
+ image = "systemd-bootdisk"
self.assertEqual(0, runCmd("wic create %s -e core-image-minimal" \
% image).status)
self.assertEqual(1, len(glob(self.resultdir + "%s-*direct" % image)))
diff --git a/meta/recipes-bsp/systemd-boot/systemd-boot.bb b/meta/recipes-bsp/systemd-boot/systemd-boot.bb
index 7036664..602052c 100644
--- a/meta/recipes-bsp/systemd-boot/systemd-boot.bb
+++ b/meta/recipes-bsp/systemd-boot/systemd-boot.bb
@@ -15,7 +15,7 @@ EXTRA_OECONF = " --enable-gnuefi \
--disable-manpages \
"
-# Imported from gummiboot recipe
+# Imported from the old gummiboot recipe
TUNE_CCARGS_remove = "-mfpmath=sse"
COMPATIBLE_HOST = "(x86_64.*|i.86.*)-linux"
diff --git a/meta/recipes-core/initrdscripts/files/init-install-efi-testfs.sh b/meta/recipes-core/initrdscripts/files/init-install-efi-testfs.sh
index b562109..9c4b263 100644
--- a/meta/recipes-core/initrdscripts/files/init-install-efi-testfs.sh
+++ b/meta/recipes-core/initrdscripts/files/init-install-efi-testfs.sh
@@ -171,19 +171,19 @@ if [ -f /run/media/$1/EFI/BOOT/grub.cfg ]; then
fi
if [ -d /run/media/$1/loader ]; then
- GUMMIBOOT_CFGS="/ssd/loader/entries/*.conf"
- # copy config files for gummiboot
+ SYSTEMDBOOT_CFGS="/ssd/loader/entries/*.conf"
+ # copy config files for systemd-boot
cp -dr /run/media/$1/loader /ssd
# delete the install entry
rm -f /ssd/loader/entries/install.conf
# delete the initrd lines
- sed -i "/initrd /d" $GUMMIBOOT_CFGS
+ sed -i "/initrd /d" $SYSTEMDBOOT_CFGS
# delete any LABEL= strings
- sed -i "s/ LABEL=[^ ]*/ /" $GUMMIBOOT_CFGS
+ sed -i "s/ LABEL=[^ ]*/ /" $SYSTEMDBOOT_CFGS
# delete any root= strings
- sed -i "s/ root=[^ ]*/ /" $GUMMIBOOT_CFGS
+ sed -i "s/ root=[^ ]*/ /" $SYSTEMDBOOT_CFGS
# add the root= and other standard boot options
- sed -i "s@options *@options root=$rootfs rw $rootwait quiet @" $GUMMIBOOT_CFGS
+ sed -i "s@options *@options root=$rootfs rw $rootwait quiet @" $SYSTEMDBOOT_CFGS
# Add the test label
echo -ne "title test\nlinux /test-kernel\noptions root=$testfs rw $rootwait quiet\n" > /ssd/loader/entries/test.conf
fi
diff --git a/meta/recipes-core/initrdscripts/files/init-install-efi.sh b/meta/recipes-core/initrdscripts/files/init-install-efi.sh
index ffb709c..5ad3a60 100644
--- a/meta/recipes-core/initrdscripts/files/init-install-efi.sh
+++ b/meta/recipes-core/initrdscripts/files/init-install-efi.sh
@@ -245,19 +245,19 @@ fi
if [ -d /run/media/$1/loader ]; then
rootuuid=$(blkid -o value -s PARTUUID ${rootfs})
- GUMMIBOOT_CFGS="/boot/loader/entries/*.conf"
- # copy config files for gummiboot
+ SYSTEMDBOOT_CFGS="/boot/loader/entries/*.conf"
+ # copy config files for systemd-boot
cp -dr /run/media/$1/loader /boot
# delete the install entry
rm -f /boot/loader/entries/install.conf
# delete the initrd lines
- sed -i "/initrd /d" $GUMMIBOOT_CFGS
+ sed -i "/initrd /d" $SYSTEMDBOOT_CFGS
# delete any LABEL= strings
- sed -i "s/ LABEL=[^ ]*/ /" $GUMMIBOOT_CFGS
+ sed -i "s/ LABEL=[^ ]*/ /" $SYSTEMDBOOT_CFGS
# delete any root= strings
- sed -i "s/ root=[^ ]*/ /" $GUMMIBOOT_CFGS
+ sed -i "s/ root=[^ ]*/ /" $SYSTEMDBOOT_CFGS
# add the root= and other standard boot options
- sed -i "s@options *@options root=PARTUUID=$rootuuid rw $rootwait quiet @" $GUMMIBOOT_CFGS
+ sed -i "s@options *@options root=PARTUUID=$rootuuid rw $rootwait quiet @" $SYSTEMDBOOT_CFGS
fi
umount /tgt_root
diff --git a/scripts/contrib/mkefidisk.sh b/scripts/contrib/mkefidisk.sh
index a175895..800733f 100755
--- a/scripts/contrib/mkefidisk.sh
+++ b/scripts/contrib/mkefidisk.sh
@@ -384,7 +384,7 @@ EFIDIR="$BOOTFS_MNT/EFI/BOOT"
cp $HDDIMG_MNT/vmlinuz $BOOTFS_MNT >$OUT 2>&1 || error "Failed to copy vmlinuz"
# Copy the efi loader and configs (booti*.efi and grub.cfg if it exists)
cp -r $HDDIMG_MNT/EFI $BOOTFS_MNT >$OUT 2>&1 || error "Failed to copy EFI dir"
-# Silently ignore a missing gummiboot loader dir (we might just be a GRUB image)
+# Silently ignore a missing systemd-boot loader dir (we might just be a GRUB image)
cp -r $HDDIMG_MNT/loader $BOOTFS_MNT >$OUT 2>&1
# Update the boot loaders configurations for an installed image
@@ -410,25 +410,25 @@ if [ -e "$GRUB_CFG" ]; then
sed -i "s@vmlinuz @vmlinuz root=$TARGET_ROOTFS ro rootwait console=ttyS0 console=tty0 @" $GRUB_CFG
fi
-# Look for a gummiboot installation
-GUMMI_ENTRIES="$BOOTFS_MNT/loader/entries"
-GUMMI_CFG="$GUMMI_ENTRIES/boot.conf"
-if [ -d "$GUMMI_ENTRIES" ]; then
- info "Configuring Gummiboot"
+# Look for a systemd-boot installation
+SYSTEMD_BOOT_ENTRIES="$BOOTFS_MNT/loader/entries"
+SYSTEMD_BOOT_CFG="$SYSTEMD_BOOT_ENTRIES/boot.conf"
+if [ -d "$SYSTEMD_BOOT_ENTRIES" ]; then
+ info "Configuring SystemD-boot"
# remove the install target if it exists
- rm $GUMMI_ENTRIES/install.conf >$OUT 2>&1
+ rm $SYSTEMD_BOOT_ENTRIES/install.conf >$OUT 2>&1
- if [ ! -e "$GUMMI_CFG" ]; then
- echo "ERROR: $GUMMI_CFG not found"
+ if [ ! -e "$SYSTEMD_BOOT_CFG" ]; then
+ echo "ERROR: $SYSTEMD_BOOT_CFG not found"
fi
- sed -i "/initrd /d" $GUMMI_CFG
- sed -i "s@ root=[^ ]*@ @" $GUMMI_CFG
- sed -i "s@options *LABEL=boot @options LABEL=Boot root=$TARGET_ROOTFS ro rootwait console=ttyS0 console=tty0 @" $GUMMI_CFG
+ sed -i "/initrd /d" $SYSTEMD_BOOT_CFG
+ sed -i "s@ root=[^ ]*@ @" $SYSTEMD_BOOT_CFG
+ sed -i "s@options *LABEL=boot @options LABEL=Boot root=$TARGET_ROOTFS ro rootwait console=ttyS0 console=tty0 @" $SYSTEMD_BOOT_CFG
fi
# Ensure we have at least one EFI bootloader configured
-if [ ! -e $GRUB_CFG ] && [ ! -e $GUMMI_CFG ]; then
+if [ ! -e $GRUB_CFG ] && [ ! -e $SYSTEMD_BOOT_CFG ]; then
die "No EFI bootloader configuration found"
fi
diff --git a/scripts/lib/wic/plugins/source/bootimg-efi.py b/scripts/lib/wic/plugins/source/bootimg-efi.py
index 4adb80b..305e910 100644
--- a/scripts/lib/wic/plugins/source/bootimg-efi.py
+++ b/scripts/lib/wic/plugins/source/bootimg-efi.py
@@ -36,7 +36,7 @@ from wic.utils.oe.misc import exec_cmd, exec_native_cmd, get_bitbake_var, \
class BootimgEFIPlugin(SourcePlugin):
"""
Create EFI boot partition.
- This plugin supports GRUB 2 and gummiboot bootloaders.
+ This plugin supports GRUB 2 and systemd-boot bootloaders.
"""
name = 'bootimg-efi'
@@ -82,7 +82,7 @@ class BootimgEFIPlugin(SourcePlugin):
cfg.close()
@classmethod
- def do_configure_gummiboot(cls, hdddir, creator, cr_workdir):
+ def do_configure_systemdboot(cls, hdddir, creator, cr_workdir):
"""
Create loader-specific systemd-boot/gummiboot config
"""
@@ -98,7 +98,7 @@ class BootimgEFIPlugin(SourcePlugin):
loader_conf += "default boot\n"
loader_conf += "timeout %d\n" % bootloader.timeout
- msger.debug("Writing gummiboot config %s/hdd/boot/loader/loader.conf" \
+ msger.debug("Writing systemd-boot config %s/hdd/boot/loader/loader.conf" \
% cr_workdir)
cfg = open("%s/hdd/boot/loader/loader.conf" % cr_workdir, "w")
cfg.write(loader_conf)
@@ -109,16 +109,16 @@ class BootimgEFIPlugin(SourcePlugin):
if configfile:
custom_cfg = get_custom_config(configfile)
if custom_cfg:
- # Use a custom configuration for gummiboot
+ # Use a custom configuration for systemd-boot
boot_conf = custom_cfg
msger.debug("Using custom configuration file "
- "%s for gummiboots's boot.conf" % configfile)
+ "%s for systemd-boots's boot.conf" % configfile)
else:
msger.error("configfile is specified but failed to "
"get it from %s." % configfile)
if not custom_cfg:
- # Create gummiboot configuration using parameters from wks file
+ # Create systemd-boot configuration using parameters from wks file
kernel = "/bzImage"
boot_conf = ""
@@ -127,7 +127,7 @@ class BootimgEFIPlugin(SourcePlugin):
boot_conf += "options LABEL=Boot root=%s %s\n" % \
(creator.rootdev, bootloader.append)
- msger.debug("Writing gummiboot config %s/hdd/boot/loader/entries/boot.conf" \
+ msger.debug("Writing systemd-boot config %s/hdd/boot/loader/entries/boot.conf" \
% cr_workdir)
cfg = open("%s/hdd/boot/loader/entries/boot.conf" % cr_workdir, "w")
cfg.write(boot_conf)
@@ -149,9 +149,8 @@ class BootimgEFIPlugin(SourcePlugin):
try:
if source_params['loader'] == 'grub-efi':
cls.do_configure_grubefi(hdddir, creator, cr_workdir)
- elif source_params['loader'] == 'gummiboot' \
- or source_params['loader'] == 'systemd-boot':
- cls.do_configure_gummiboot(hdddir, creator, cr_workdir)
+ elif source_params['loader'] == 'systemd-boot':
+ cls.do_configure_systemdboot(hdddir, creator, cr_workdir)
else:
msger.error("unrecognized bootimg-efi loader: %s" % source_params['loader'])
except KeyError:
@@ -190,8 +189,7 @@ class BootimgEFIPlugin(SourcePlugin):
exec_cmd(cp_cmd, True)
shutil.move("%s/grub.cfg" % cr_workdir,
"%s/hdd/boot/EFI/BOOT/grub.cfg" % cr_workdir)
- elif source_params['loader'] == 'gummiboot' \
- or source_params['loader'] == 'systemd-boot':
+ elif source_params['loader'] == 'systemd-boot':
cp_cmd = "cp %s/EFI/BOOT/* %s/EFI/BOOT" % (bootimg_dir, hdddir)
exec_cmd(cp_cmd, True)
else:
--
2.10.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH 2/2] Remove old gummiboot recipe, class and wks file
[not found] <cover.1479942307.git.alejandro.hernandez@linux.intel.com>
2016-11-23 23:08 ` [PATCH 1/2] systemd-boot: Completely replaces gummiboot with systemd-boot Alejandro Hernandez
@ 2016-11-23 23:08 ` Alejandro Hernandez
1 sibling, 0 replies; 2+ messages in thread
From: Alejandro Hernandez @ 2016-11-23 23:08 UTC (permalink / raw)
To: openembedded-core
Since the gummiboot project is no longer being maintained
and we are using systemd-boot as a replacement instead,
we can now clean up all remaining gummiboot files.
[YOCTO #10332]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
---
meta/classes/gummiboot.bbclass | 121 ---------------------
...-C-syntax-errors-for-function-declaration.patch | 74 -------------
.../gummiboot/gummiboot/fix-objcopy.patch | 45 --------
meta/recipes-bsp/gummiboot/gummiboot_git.bb | 39 -------
scripts/lib/wic/canned-wks/mkgummidisk.wks | 11 --
5 files changed, 290 deletions(-)
delete mode 100644 meta/classes/gummiboot.bbclass
delete mode 100644 meta/recipes-bsp/gummiboot/gummiboot/0001-console-Fix-C-syntax-errors-for-function-declaration.patch
delete mode 100644 meta/recipes-bsp/gummiboot/gummiboot/fix-objcopy.patch
delete mode 100644 meta/recipes-bsp/gummiboot/gummiboot_git.bb
delete mode 100644 scripts/lib/wic/canned-wks/mkgummidisk.wks
diff --git a/meta/classes/gummiboot.bbclass b/meta/classes/gummiboot.bbclass
deleted file mode 100644
index 4f2dea6..0000000
--- a/meta/classes/gummiboot.bbclass
+++ /dev/null
@@ -1,121 +0,0 @@
-# Copyright (C) 2014 Intel Corporation
-#
-# Released under the MIT license (see COPYING.MIT)
-
-# gummiboot.bbclass - equivalent of grub-efi.bbclass
-# Set EFI_PROVIDER = "gummiboot" to use gummiboot on your live images instead of grub-efi
-# (images built by image-live.bbclass or image-vm.bbclass)
-
-do_bootimg[depends] += "${MLPREFIX}gummiboot:do_deploy"
-do_bootdirectdisk[depends] += "${MLPREFIX}gummiboot:do_deploy"
-
-EFIDIR = "/EFI/BOOT"
-
-GUMMIBOOT_CFG ?= "${S}/loader.conf"
-GUMMIBOOT_ENTRIES ?= ""
-GUMMIBOOT_TIMEOUT ?= "10"
-
-# Need UUID utility code.
-inherit fs-uuid
-
-efi_populate() {
- DEST=$1
-
- EFI_IMAGE="gummibootia32.efi"
- DEST_EFI_IMAGE="bootia32.efi"
- if [ "${TARGET_ARCH}" = "x86_64" ]; then
- EFI_IMAGE="gummibootx64.efi"
- DEST_EFI_IMAGE="bootx64.efi"
- fi
-
- install -d ${DEST}${EFIDIR}
- # gummiboot requires these paths for configuration files
- # they are not customizable so no point in new vars
- install -d ${DEST}/loader
- install -d ${DEST}/loader/entries
- install -m 0644 ${DEPLOY_DIR_IMAGE}/${EFI_IMAGE} ${DEST}${EFIDIR}/${DEST_EFI_IMAGE}
- EFIPATH=$(echo "${EFIDIR}" | sed 's/\//\\/g')
- printf 'fs0:%s\%s\n' "$EFIPATH" "$DEST_EFI_IMAGE" >${DEST}/startup.nsh
- install -m 0644 ${GUMMIBOOT_CFG} ${DEST}/loader/loader.conf
- for i in ${GUMMIBOOT_ENTRIES}; do
- install -m 0644 ${i} ${DEST}/loader/entries
- done
-}
-
-efi_iso_populate() {
- iso_dir=$1
- efi_populate $iso_dir
- mkdir -p ${EFIIMGDIR}/${EFIDIR}
- cp $iso_dir/${EFIDIR}/* ${EFIIMGDIR}${EFIDIR}
- cp $iso_dir/vmlinuz ${EFIIMGDIR}
- EFIPATH=$(echo "${EFIDIR}" | sed 's/\//\\/g')
- echo "fs0:${EFIPATH}\\${DEST_EFI_IMAGE}" > ${EFIIMGDIR}/startup.nsh
- if [ -f "$iso_dir/initrd" ] ; then
- cp $iso_dir/initrd ${EFIIMGDIR}
- fi
-}
-
-efi_hddimg_populate() {
- efi_populate $1
-}
-
-python build_efi_cfg() {
- s = d.getVar("S", True)
- labels = d.getVar('LABELS', True)
- if not labels:
- bb.debug(1, "LABELS not defined, nothing to do")
- return
-
- if labels == []:
- bb.debug(1, "No labels, nothing to do")
- return
-
- cfile = d.getVar('GUMMIBOOT_CFG', True)
- try:
- cfgfile = open(cfile, 'w')
- except OSError:
- bb.fatal('Unable to open %s' % cfile)
-
- cfgfile.write('# Automatically created by OE\n')
- cfgfile.write('default %s\n' % (labels.split()[0]))
- timeout = d.getVar('GUMMIBOOT_TIMEOUT', True)
- if timeout:
- cfgfile.write('timeout %s\n' % timeout)
- else:
- cfgfile.write('timeout 10\n')
- cfgfile.close()
-
- for label in labels.split():
- localdata = d.createCopy()
-
- overrides = localdata.getVar('OVERRIDES', True)
- if not overrides:
- bb.fatal('OVERRIDES not defined')
-
- entryfile = "%s/%s.conf" % (s, label)
- d.appendVar("GUMMIBOOT_ENTRIES", " " + entryfile)
- try:
- entrycfg = open(entryfile, "w")
- except OSError:
- bb.fatal('Unable to open %s' % entryfile)
- localdata.setVar('OVERRIDES', label + ':' + overrides)
- bb.data.update_data(localdata)
-
- entrycfg.write('title %s\n' % label)
- entrycfg.write('linux /vmlinuz\n')
-
- append = localdata.getVar('APPEND', True)
- initrd = localdata.getVar('INITRD', True)
-
- if initrd:
- entrycfg.write('initrd /initrd\n')
- lb = label
- if label == "install":
- lb = "install-efi"
- entrycfg.write('options LABEL=%s ' % lb)
- if append:
- append = replace_rootfs_uuid(d, append)
- entrycfg.write('%s' % append)
- entrycfg.write('\n')
- entrycfg.close()
-}
diff --git a/meta/recipes-bsp/gummiboot/gummiboot/0001-console-Fix-C-syntax-errors-for-function-declaration.patch b/meta/recipes-bsp/gummiboot/gummiboot/0001-console-Fix-C-syntax-errors-for-function-declaration.patch
deleted file mode 100644
index fa50bc4..0000000
--- a/meta/recipes-bsp/gummiboot/gummiboot/0001-console-Fix-C-syntax-errors-for-function-declaration.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 55957faf1272c8f5f304909faeebf647a78e3701 Mon Sep 17 00:00:00 2001
-From: Khem Raj <raj.khem@gmail.com>
-Date: Wed, 9 Sep 2015 07:19:45 +0000
-Subject: [PATCH] console: Fix C syntax errors for function declaration
-
-To address this, the semicolons after the function parameters should be
-replaced by commas, and the last one should be omitted
-
-Signed-off-by: Khem Raj <raj.khem@gmail.com>
----
-Upstream-Status: Pending
-
- src/efi/console.c | 26 +++++++++++++-------------
- 1 file changed, 13 insertions(+), 13 deletions(-)
-
-diff --git a/src/efi/console.c b/src/efi/console.c
-index 6206c80..66aa88f 100644
---- a/src/efi/console.c
-+++ b/src/efi/console.c
-@@ -27,8 +27,8 @@
- struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL;
-
- typedef EFI_STATUS (EFIAPI *EFI_INPUT_RESET_EX)(
-- struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This;
-- BOOLEAN ExtendedVerification;
-+ struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
-+ BOOLEAN ExtendedVerification
- );
-
- typedef UINT8 EFI_KEY_TOGGLE_STATE;
-@@ -44,29 +44,29 @@ typedef struct {
- } EFI_KEY_DATA;
-
- typedef EFI_STATUS (EFIAPI *EFI_INPUT_READ_KEY_EX)(
-- struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This;
-- EFI_KEY_DATA *KeyData;
-+ struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
-+ EFI_KEY_DATA *KeyData
- );
-
- typedef EFI_STATUS (EFIAPI *EFI_SET_STATE)(
-- struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This;
-- EFI_KEY_TOGGLE_STATE *KeyToggleState;
-+ struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
-+ EFI_KEY_TOGGLE_STATE *KeyToggleState
- );
-
- typedef EFI_STATUS (EFIAPI *EFI_KEY_NOTIFY_FUNCTION)(
-- EFI_KEY_DATA *KeyData;
-+ EFI_KEY_DATA *KeyData
- );
-
- typedef EFI_STATUS (EFIAPI *EFI_REGISTER_KEYSTROKE_NOTIFY)(
-- struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This;
-- EFI_KEY_DATA KeyData;
-- EFI_KEY_NOTIFY_FUNCTION KeyNotificationFunction;
-- VOID **NotifyHandle;
-+ struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
-+ EFI_KEY_DATA KeyData,
-+ EFI_KEY_NOTIFY_FUNCTION KeyNotificationFunction,
-+ VOID **NotifyHandle
- );
-
- typedef EFI_STATUS (EFIAPI *EFI_UNREGISTER_KEYSTROKE_NOTIFY)(
-- struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This;
-- VOID *NotificationHandle;
-+ struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
-+ VOID *NotificationHandle
- );
-
- typedef struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL {
---
-2.5.1
-
diff --git a/meta/recipes-bsp/gummiboot/gummiboot/fix-objcopy.patch b/meta/recipes-bsp/gummiboot/gummiboot/fix-objcopy.patch
deleted file mode 100644
index 49f5593..0000000
--- a/meta/recipes-bsp/gummiboot/gummiboot/fix-objcopy.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 0f7f9e3bb1d0e1b93f3ad8a1d5d7bdd3fbf27494 Mon Sep 17 00:00:00 2001
-From: Robert Yang <liezhi.yang@windriver.com>
-Date: Thu, 27 Mar 2014 07:20:33 +0000
-Subject: [PATCH] Makefile.am: use objcopy from the env
-
-It uses the "objcopy" directly, which is not suitable for cross compile.
-
-Upstream-Status: Pending
-
-Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
----
- Makefile.am | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-Index: git/Makefile.am
-===================================================================
---- git.orig/Makefile.am
-+++ git/Makefile.am
-@@ -19,6 +19,8 @@
- ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS}
- AM_MAKEFLAGS = --no-print-directory
-
-+OBJCOPY ?= objcopy
-+
- gummibootlibdir = $(prefix)/lib/gummiboot
-
- AM_CPPFLAGS = -include config.h
-@@ -148,7 +150,7 @@ $(gummiboot_solib): $(gummiboot_objects)
- .DELETE_ON_ERROR: $(gummboot_solib)
-
- $(gummiboot): $(gummiboot_solib)
-- $(AM_V_GEN) objcopy -j .text -j .sdata -j .data -j .dynamic \
-+ $(AM_V_GEN) $(OBJCOPY) -j .text -j .sdata -j .data -j .dynamic \
- -j .dynsym -j .rel -j .rela -j .reloc \
- --target=efi-app-$(ARCH) $< $@
-
-@@ -183,7 +185,7 @@ $(stub_solib): $(stub_objects)
- .DELETE_ON_ERROR: $(gummboot_solib)
-
- $(stub): $(stub_solib)
-- $(AM_V_GEN) objcopy -j .text -j .sdata -j .data -j .dynamic \
-+ $(AM_V_GEN) $(OBJCOPY) -j .text -j .sdata -j .data -j .dynamic \
- -j .dynsym -j .rel -j .rela -j .reloc \
- --target=efi-app-$(ARCH) $< $@
-
diff --git a/meta/recipes-bsp/gummiboot/gummiboot_git.bb b/meta/recipes-bsp/gummiboot/gummiboot_git.bb
deleted file mode 100644
index c684b83..0000000
--- a/meta/recipes-bsp/gummiboot/gummiboot_git.bb
+++ /dev/null
@@ -1,39 +0,0 @@
-SUMMARY = "Gummiboot is a simple UEFI boot manager which executes configured EFI images."
-HOMEPAGE = "http://freedesktop.org/wiki/Software/gummiboot"
-
-LICENSE = "LGPLv2.1"
-LIC_FILES_CHKSUM = "file://LICENSE;md5=4fbd65380cdd255951079008b364516c"
-
-DEPENDS = "gnu-efi util-linux"
-
-inherit autotools pkgconfig manpages
-inherit deploy
-
-PV = "48+git${SRCPV}"
-SRCREV = "2bcd919c681c952eb867ef1bdb458f1bc49c2d55"
-SRC_URI = "git://anongit.freedesktop.org/gummiboot \
- file://fix-objcopy.patch \
- file://0001-console-Fix-C-syntax-errors-for-function-declaration.patch \
- "
-
-PACKAGECONFIG[manpages] = "--enable-manpages, --disable-manpages, libxslt-native xmlto-native"
-
-# Note: Add COMPATIBLE_HOST here is only because it depends on gnu-efi
-# which has set the COMPATIBLE_HOST, the gummiboot itself may work on
-# more hosts.
-COMPATIBLE_HOST = "(x86_64.*|i.86.*)-linux"
-
-S = "${WORKDIR}/git"
-
-EXTRA_OECONF = "--with-efi-includedir=${STAGING_INCDIR} \
- --with-efi-ldsdir=${STAGING_LIBDIR} \
- --with-efi-libdir=${STAGING_LIBDIR}"
-
-EXTRA_OEMAKE += "gummibootlibdir=${libdir}/gummiboot"
-
-TUNE_CCARGS_remove = "-mfpmath=sse"
-
-do_deploy () {
- install ${B}/gummiboot*.efi ${DEPLOYDIR}
-}
-addtask deploy before do_build after do_compile
diff --git a/scripts/lib/wic/canned-wks/mkgummidisk.wks b/scripts/lib/wic/canned-wks/mkgummidisk.wks
deleted file mode 100644
index f3ae090..0000000
--- a/scripts/lib/wic/canned-wks/mkgummidisk.wks
+++ /dev/null
@@ -1,11 +0,0 @@
-# short-description: Create an EFI disk image
-# long-description: Creates a partitioned EFI disk image that the user
-# can directly dd to boot media.
-
-part /boot --source bootimg-efi --sourceparams="loader=gummiboot" --ondisk sda --label msdos --active --align 1024
-
-part / --source rootfs --ondisk sda --fstype=ext4 --label platform --align 1024
-
-part swap --ondisk sda --size 44 --label swap1 --fstype=swap
-
-bootloader --ptable gpt --timeout=5 --append="rootwait rootfstype=ext4 console=ttyS0,115200 console=tty0"
--
2.10.1
^ permalink raw reply related [flat|nested] 2+ messages in thread