meta-xilinx moved to meta-xilinx-community

meta-xilinx moved to meta-xilinx-community

[Elvis Dowson]

Hi,
      The existing meta-xilinx repo has moved to meta-xilinx-community

http://git.yoctoproject.org/cgit/cgit.cgi/meta-xilinx-community/

This layer will contain community support for the Xilinx platforms, including legacy boards (ML507) and other soft-processor architectures.

This paves the way for an officially supported meta-xilinx layer, the details of which will be officially announced by Xilinx.

Best regards,

Elvis Dowson

Re: [yocto] meta-xilinx moved to meta-xilinx-community

[Khem Raj]

Sipke


On Wed, May 29, 2013 at 5:14 PM, Sipke Vriend <sipke.vriend@xilinx.com> wrote:
> Hi,
>
> yoctoproject.org is now hosting meta-xilinx from Xilinx.
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-xilinx/
> This repository was previously at www.github.com/Xilinx/meta-xilinx.git, and will remain there as a mirror.
>
> This layer contains Xilinx hardware support metadata for Zynq and Microblaze architecture, currently with bsp layers targeting the evaluation boards zc702, zedboard and kc705. The layer is under development and further information is available in README files within the layer.
>

How does it relate to meta-xilinx-community layer ?

eg.
http://git.yoctoproject.org/cgit/cgit.cgi/meta-xilinx-community/tree/conf/machine

contains

zc702 zc706 and zedboard machines among others.

and the new meta-xilinx layer contains bsps for zc702 and zedboard as well.

I do not know much about xilinx family of chips. But say if I were to
use zeboard
which layer would I choose ?

and how are development of these two layers related if at all


> Regards
> Sipke Vriend
>
> -----Original Message-----
> From: Elvis Dowson [mailto:elvis.dowson@gmail.com]
> Sent: Friday, 24 May 2013 1:53 PM
> To: Yocto Discussion Mailing List; OpenEmbedded Developer Mailing List; OpenEmbedded Core Mailing List; meta-xilinx Mailing List
> Cc: Sipke Vriend; Nathan Rossi
> Subject: meta-xilinx moved to meta-xilinx-community
>
> Hi,
>       The existing meta-xilinx repo has moved to meta-xilinx-community
>
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-xilinx-community/
>
> This layer will contain community support for the Xilinx platforms, including legacy boards (ML507) and other soft-processor architectures.
>
> This paves the way for an officially supported meta-xilinx layer, the details of which will be officially announced by Xilinx.
>
> Best regards,
>
> Elvis Dowson
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

Re: [yocto] meta-xilinx moved to meta-xilinx-community

[Sipke Vriend]

Hi Khem,

Meta-xilinx is a layer aimed at providing Xilinx support for Microblaze and Zynq as well as a limited number of BSPs to exercise those architectures. This layer is maintained by Xilinx.

Meta-xilinx-community is a layer (previously named meta-xilinx) which has support for the same architectures, but also a number of legacy architectures (such as powerpc) and boards (ml507) which will not be in the meta-xilinx layer. This layer is maintained primarily by Elvis Dowson.

Currently there is overlap in architectures and supported boards but over time the meta-xilinx-community has the option of layering on top of meta-xilinx if there is no functional difference, which will reduce this overlap. To date each of the layers has leveraged off the other, and the maintainers are in contact with each other. 
We hope over time meta-xilinx will be the common base layer for meta-xilinx-community and any other layer supporting for example custom boards running Xilinx hardware.

As a maintainer of meta-xilinx I will suggest starting with it, but the choice of layer will depend on your need and it will be worth comparing whether there are advanced features in the meta-xilinx-community layer that you require.
Both layers use the same email list: meta-xilinx@yoctoproject.org, so that is always a good starting point to ask.

Regards
Sipke

-----Original Message-----
From: Khem Raj [mailto:raj.khem@gmail.com] 
Sent: Thursday, 30 May 2013 12:22 PM
To: Sipke Vriend
Cc: Yocto Discussion Mailing List; OpenEmbedded Developer Mailing List; OpenEmbedded Core Mailing List; meta-xilinx Mailing List; Nathan Rossi; David Holsgrove; Mike Matera; John Williams
Subject: Re: [yocto] meta-xilinx moved to meta-xilinx-community

Sipke


On Wed, May 29, 2013 at 5:14 PM, Sipke Vriend <sipke.vriend@xilinx.com> wrote:
> Hi,
>
> yoctoproject.org is now hosting meta-xilinx from Xilinx.
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-xilinx/
> This repository was previously at www.github.com/Xilinx/meta-xilinx.git, and will remain there as a mirror.
>
> This layer contains Xilinx hardware support metadata for Zynq and Microblaze architecture, currently with bsp layers targeting the evaluation boards zc702, zedboard and kc705. The layer is under development and further information is available in README files within the layer.
>

How does it relate to meta-xilinx-community layer ?

eg.
http://git.yoctoproject.org/cgit/cgit.cgi/meta-xilinx-community/tree/conf/machine

contains

zc702 zc706 and zedboard machines among others.

and the new meta-xilinx layer contains bsps for zc702 and zedboard as well.

I do not know much about xilinx family of chips. But say if I were to
use zeboard
which layer would I choose ?

and how are development of these two layers related if at all


> Regards
> Sipke Vriend
>
> -----Original Message-----
> From: Elvis Dowson [mailto:elvis.dowson@gmail.com]
> Sent: Friday, 24 May 2013 1:53 PM
> To: Yocto Discussion Mailing List; OpenEmbedded Developer Mailing List; OpenEmbedded Core Mailing List; meta-xilinx Mailing List
> Cc: Sipke Vriend; Nathan Rossi
> Subject: meta-xilinx moved to meta-xilinx-community
>
> Hi,
>       The existing meta-xilinx repo has moved to meta-xilinx-community
>
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-xilinx-community/
>
> This layer will contain community support for the Xilinx platforms, including legacy boards (ML507) and other soft-processor architectures.
>
> This paves the way for an officially supported meta-xilinx layer, the details of which will be officially announced by Xilinx.
>
> Best regards,
>
> Elvis Dowson
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto