Re: [PATCH v1 1/2] gpg-sign: Add parameters to gpg signature function

[Ferry Toth <fntoth@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 982 bytes --]

Hi,

Op 24-03-2022 om 23:11 schreef Ferry Toth:
....

> It doesn't seem to be a particularly volatile area in the code. I 
> refreshed
>>>> Xavier's patches for Gatesgarth, and am actively using unchanged 
>>>> patch on
>>>> Honisiter.
>>>> I don't know how the automated testing is working but I guess for 
>>>> RPM a repo
>>>> is generated using a small layer? And then tested on a qemu running 
>>>> the
>>>> rootfs?
>>>> Should be almost same for deb/apt, maybe could be modified from rpm 
>>>> test?
>>> I think the rpm test is test_testimage_dnf in
>>> meta/lib/oeqa/selftest/cases/runtime_test.py. You'd run it with:
>>>
>>> oe-selftest -r runtime_test.TestImage.test_testimage_dnf
>> I'll have a look.

Grumble. I ran this test but it failed due to needing to run sudo to 
setup a tap interface (I ran it under screen).

Is there a way to continue this test without first clearing the build-st 
directory? It take about 2 hours to get to this failure point.

Thanks,

Ferry

[-- Attachment #2: Type: text/html, Size: 1872 bytes --]