From: Richard Purdie <richard.purdie@linuxfoundation.org>
To: openembedded-core@lists.openembedded.org
Subject: [PATCH 0/6] RFC Distro config changes
Date: Tue, 10 May 2011 15:00:39 +0100 [thread overview]
Message-ID: <cover.1305035617.git.richard.purdie@linuxfoundation.org> (raw)
From: Richard Purdie <richard.purdie@linuxfoundation.org>
As discussed, we want to make OE-Core usable with no distro set. This patch series
makes some big steps towards that goal. I'd be interested in feedback on whether it
does the right things and would be usable by others.
The key is the inclusion of a distro/defaultsetup.conf file by bitbake.conf and
in turn this pulls in a variety of other common include files which can likely be
shared. Any point of this cycle can be overridden by another layer so its totally
customisable. I'd encourage users to use the pieces they can where possible so we
all share best practises but obviously people have choice.
I did dump a load of "default" variables into default-distrovars.inc, I'm not
calling that file finished, I just had to draw the line somewhere and start a
discussion about this :)
Also, I'm aware there are still a few poky-* files in meta/conf/distro/include.
Some of these can just be deleted, others renamed tcmode-* and I'll take care
of that. I'll also delete the poky.conf file since it no longer contains anything
required to make OE-Core build as far as I know (wider testing needed).
Pull URL: git://git.openembedded.org/openembedded-core-contrib
Branch: rpurdie/distro
Browse: http://git.openembedded.org/cgit.cgi/openembedded-core-contrib/log/?h=rpurdie/distro
Richard Purdie (6):
Drop poky-floating-revisions.inc, poky-bleeding.conf and
poky-lsb.conf
bitbake.conf: Include the new default-providers.inc and
default-versions.inc files
distro: Add defaultsetup.conf, a set of default configuration
providing sane overrridable default for commonly used options
machine/qemu: Add qemu-config as an essential machine speicfic
dependency and drop specific distro config
conf/distro/include/default-distrovars.inc: Create set of default
'distro' variable values
preferred-xorg-versions.inc: Drop this, it makes no sense given we
only have one version of these recipes
meta/conf/bitbake.conf | 1 +
meta/conf/distro/defaultsetup.conf | 24 +++
meta/conf/distro/include/default-distrovars.inc | 41 ++++++
meta/conf/distro/include/default-providers.inc | 34 +++++
meta/conf/distro/include/default-versions.inc | 18 +++
meta/conf/distro/include/poky-fixed-revisions.inc | 27 ----
.../distro/include/poky-floating-revisions.inc | 83 -----------
.../distro/include/preferred-xorg-versions.inc | 150 --------------------
.../include/{poky-eglibc.inc => tclibc-eglibc.inc} | 6 +-
.../include/{poky-glibc.inc => tclibc-glibc.inc} | 6 +-
.../include/{poky-uclibc.inc => tclibc-uclibc.inc} | 4 +
.../{poky-default.inc => tcmode-default.inc} | 13 +-
meta/conf/distro/poky-bleeding.conf | 8 -
meta/conf/distro/poky-lsb.conf | 9 --
meta/conf/distro/poky.conf | 150 ++------------------
meta/conf/machine/include/qemu.inc | 1 +
meta/conf/machine/qemux86-64.conf | 2 +-
meta/conf/machine/qemux86.conf | 2 +-
18 files changed, 149 insertions(+), 430 deletions(-)
create mode 100644 meta/conf/distro/defaultsetup.conf
create mode 100644 meta/conf/distro/include/default-distrovars.inc
create mode 100644 meta/conf/distro/include/default-providers.inc
create mode 100644 meta/conf/distro/include/default-versions.inc
delete mode 100644 meta/conf/distro/include/poky-fixed-revisions.inc
delete mode 100644 meta/conf/distro/include/poky-floating-revisions.inc
delete mode 100644 meta/conf/distro/include/preferred-xorg-versions.inc
rename meta/conf/distro/include/{poky-eglibc.inc => tclibc-eglibc.inc} (92%)
rename meta/conf/distro/include/{poky-glibc.inc => tclibc-glibc.inc} (91%)
rename meta/conf/distro/include/{poky-uclibc.inc => tclibc-uclibc.inc} (86%)
rename meta/conf/distro/include/{poky-default.inc => tcmode-default.inc} (85%)
delete mode 100644 meta/conf/distro/poky-bleeding.conf
delete mode 100644 meta/conf/distro/poky-lsb.conf
--
1.7.4.1
next reply other threads:[~2011-05-10 14:03 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-10 14:00 Richard Purdie [this message]
2011-05-10 14:00 ` [PATCH 1/6] Drop poky-floating-revisions.inc, poky-bleeding.conf and poky-lsb.conf Richard Purdie
2011-05-10 14:00 ` [PATCH 2/6] bitbake.conf: Include the new default-providers.inc and default-versions.inc files Richard Purdie
2011-05-10 14:20 ` Koen Kooi
2011-05-11 9:09 ` Richard Purdie
2011-05-11 10:08 ` Koen Kooi
2011-05-11 11:24 ` Richard Purdie
2011-05-11 11:43 ` Koen Kooi
2011-05-11 13:34 ` Richard Purdie
2011-05-10 14:00 ` [PATCH 3/6] distro: Add defaultsetup.conf, a set of default configuration providing sane overrridable default for commonly used options Richard Purdie
2011-05-10 14:31 ` Koen Kooi
2011-05-11 9:37 ` Richard Purdie
2011-05-15 22:28 ` Khem Raj
2011-05-10 14:00 ` [PATCH 6/6] preferred-xorg-versions.inc: Drop this, it makes no sense given we only have one version of these recipes Richard Purdie
2011-05-10 14:00 ` [PATCH 5/6] conf/distro/include/default-distrovars.inc: Create set of default 'distro' variable values Richard Purdie
2011-05-10 14:26 ` Frans Meulenbroeks
2011-05-10 19:26 ` Richard Purdie
2011-05-11 11:51 ` Frans Meulenbroeks
2011-05-15 20:48 ` Khem Raj
2011-05-19 22:51 ` Richard Purdie
2011-05-10 14:00 ` [PATCH 4/6] machine/qemu: Add qemu-config as an essential machine speicfic dependency and drop specific distro config Richard Purdie
2011-05-10 14:05 ` [PATCH 0/6] RFC Distro config changes Frans Meulenbroeks
2011-05-10 14:08 ` Richard Purdie
[not found] ` <BANLkTi=uvN8_u6SQhKfs2BwOnSOCQApKSQ@mail.gmail.com>
2011-05-11 3:42 ` Khem Raj
2011-05-10 15:58 ` Koen Kooi
2011-05-11 9:45 ` Richard Purdie
2011-05-11 10:13 ` Koen Kooi
2011-05-11 10:54 ` Richard Purdie
2011-05-11 11:45 ` Koen Kooi
2011-05-15 21:31 ` Khem Raj
2011-05-15 20:22 ` Khem Raj
2011-05-15 21:34 ` Khem Raj
2011-05-11 13:30 ` Richard Purdie
2011-05-15 20:27 ` Otavio Salvador
2011-05-16 12:24 ` Richard Purdie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1305035617.git.richard.purdie@linuxfoundation.org \
--to=richard.purdie@linuxfoundation.org \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox