* [PATCH 1/3] linux-libc-headers: factor common code into linux-libc-headers.inc
2011-10-27 14:32 [PATCH 0/3] RFC v3: provide 3.0.x and 3.1 libc headers Bruce Ashfield
@ 2011-10-27 14:32 ` Bruce Ashfield
2011-10-27 14:32 ` [PATCH 2/3] linux-libc-headers: provide 3.0.x and 3.1 headers Bruce Ashfield
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Bruce Ashfield @ 2011-10-27 14:32 UTC (permalink / raw)
To: richard.purdie; +Cc: openembedded-core, saul.wold
Each time a new linux-libc-headers is created the same code is
cloned. Placing the common functionality in the .inc file simplies
each recipe and make maintenance easier.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
---
| 47 +++++++++++++++++++
| 48 +-------------------
| 49 +-------------------
3 files changed, 49 insertions(+), 95 deletions(-)
--git a/meta/recipes-kernel/linux-libc-headers/linux-libc-headers.inc b/meta/recipes-kernel/linux-libc-headers/linux-libc-headers.inc
index 014024f..e586ac3 100644
--- a/meta/recipes-kernel/linux-libc-headers/linux-libc-headers.inc
+++ b/meta/recipes-kernel/linux-libc-headers/linux-libc-headers.inc
@@ -5,6 +5,53 @@ LICENSE = "GPLv2"
LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
SRC_URI = "${KERNELORG_MIRROR}/linux/kernel/v2.6/linux-${PV}.tar.bz2"
+S = "${WORKDIR}/linux-${PV}"
+
+set_arch() {
+ case ${TARGET_ARCH} in
+ alpha*) ARCH=alpha ;;
+ arm*) ARCH=arm ;;
+ cris*) ARCH=cris ;;
+ hppa*) ARCH=parisc ;;
+ i*86*) ARCH=i386 ;;
+ ia64*) ARCH=ia64 ;;
+ mips*) ARCH=mips ;;
+ m68k*) ARCH=m68k ;;
+ powerpc*) ARCH=powerpc ;;
+ s390*) ARCH=s390 ;;
+ sh*) ARCH=sh ;;
+ sparc64*) ARCH=sparc64 ;;
+ sparc*) ARCH=sparc ;;
+ x86_64*) ARCH=x86_64 ;;
+ avr32*) ARCH=avr32 ;;
+ bfin*) ARCH=blackfin ;;
+ microblaze*) ARCH=microblaze ;;
+ esac
+}
+
+do_configure() {
+ set_arch
+ oe_runmake allnoconfig ARCH=$ARCH
+}
+
+do_compile () {
+}
+
+do_install() {
+ set_arch
+ oe_runmake headers_install INSTALL_HDR_PATH=${D}${exec_prefix} ARCH=$ARCH
+ # Kernel should not be exporting this header
+ rm -f ${D}${exec_prefix}/include/scsi/scsi.h
+
+ # The ..install.cmd conflicts between various configure runs
+ find ${D}${includedir} -name ..install.cmd | xargs rm -f
+}
+
+BBCLASSEXTEND = "nativesdk"
+
#DEPENDS = "cross-linkage"
RDEPENDS_${PN}-dev = ""
RRECOMMENDS_${PN}-dbg = "${PN}-dev (= ${EXTENDPKGV})"
+
+INHIBIT_DEFAULT_DEPS = "1"
+DEPENDS += "unifdef-native"
\ No newline at end of file
--git a/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.37.2.bb b/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.37.2.bb
index 55d7527..c6562b5 100644
--- a/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.37.2.bb
+++ b/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.37.2.bb
@@ -1,53 +1,7 @@
require linux-libc-headers.inc
-INHIBIT_DEFAULT_DEPS = "1"
-DEPENDS += "unifdef-native"
-PR = "r2"
+PR = "r3"
SRC_URI += " file://connector-msg-size-fix.patch"
-
-S = "${WORKDIR}/linux-${PV}"
-
-set_arch() {
- case ${TARGET_ARCH} in
- alpha*) ARCH=alpha ;;
- arm*) ARCH=arm ;;
- cris*) ARCH=cris ;;
- hppa*) ARCH=parisc ;;
- i*86*) ARCH=i386 ;;
- ia64*) ARCH=ia64 ;;
- mips*) ARCH=mips ;;
- m68k*) ARCH=m68k ;;
- powerpc*) ARCH=powerpc ;;
- s390*) ARCH=s390 ;;
- sh*) ARCH=sh ;;
- sparc64*) ARCH=sparc64 ;;
- sparc*) ARCH=sparc ;;
- x86_64*) ARCH=x86_64 ;;
- avr32*) ARCH=avr32 ;;
- bfin*) ARCH=blackfin ;;
- microblaze*) ARCH=microblaze ;;
- esac
-}
-
-do_configure() {
- set_arch
- oe_runmake allnoconfig ARCH=$ARCH
-}
-
-do_compile () {
-}
-
-do_install() {
- set_arch
- oe_runmake headers_install INSTALL_HDR_PATH=${D}${exec_prefix} ARCH=$ARCH
- # Kernel should not be exporting this header
- rm -f ${D}${exec_prefix}/include/scsi/scsi.h
-
- # The ..install.cmd conflicts between various configure runs
- find ${D}${includedir} -name ..install.cmd | xargs rm -f
-}
-
-BBCLASSEXTEND = "nativesdk"
SRC_URI[md5sum] = "89f681bc7c917a84aa7470da6eed5101"
SRC_URI[sha256sum] = "2920c4cd3e87fe40ebee96d28779091548867e1c36f71c1fc3d07e6d5802161f"
--git a/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.39.bb b/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.39.bb
index 14f5e8a..36cfb4f 100644
--- a/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.39.bb
+++ b/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.39.bb
@@ -1,54 +1,7 @@
require linux-libc-headers.inc
-INHIBIT_DEFAULT_DEPS = "1"
-DEPENDS += "unifdef-native"
+PR = "r3"
SRC_URI += " file://connector-msg-size-fix.patch"
SRC_URI[md5sum] = "1aab7a741abe08d42e8eccf20de61e05"
SRC_URI[sha256sum] = "584d17f2a3ee18a9501d7ff36907639e538cfdba4529978b8550c461d45c61f6"
-
-S = "${WORKDIR}/linux-${PV}"
-
-PR = "r2"
-
-set_arch() {
- case ${TARGET_ARCH} in
- alpha*) ARCH=alpha ;;
- arm*) ARCH=arm ;;
- cris*) ARCH=cris ;;
- hppa*) ARCH=parisc ;;
- i*86*) ARCH=i386 ;;
- ia64*) ARCH=ia64 ;;
- mips*) ARCH=mips ;;
- m68k*) ARCH=m68k ;;
- powerpc*) ARCH=powerpc ;;
- s390*) ARCH=s390 ;;
- sh*) ARCH=sh ;;
- sparc64*) ARCH=sparc64 ;;
- sparc*) ARCH=sparc ;;
- x86_64*) ARCH=x86_64 ;;
- avr32*) ARCH=avr32 ;;
- bfin*) ARCH=blackfin ;;
- microblaze*) ARCH=microblaze ;;
- esac
-}
-
-do_configure() {
- set_arch
- oe_runmake allnoconfig ARCH=$ARCH
-}
-
-do_compile () {
-}
-
-do_install() {
- set_arch
- oe_runmake headers_install INSTALL_HDR_PATH=${D}${exec_prefix} ARCH=$ARCH
- # Kernel should not be exporting this header
- rm -f ${D}${exec_prefix}/include/scsi/scsi.h
-
- # The ..install.cmd conflicts between various configure runs
- find ${D}${includedir} -name ..install.cmd | xargs rm -f
-}
-
-BBCLASSEXTEND = "nativesdk"
--
1.7.0.4
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 2/3] linux-libc-headers: provide 3.0.x and 3.1 headers
2011-10-27 14:32 [PATCH 0/3] RFC v3: provide 3.0.x and 3.1 libc headers Bruce Ashfield
2011-10-27 14:32 ` [PATCH 1/3] linux-libc-headers: factor common code into linux-libc-headers.inc Bruce Ashfield
@ 2011-10-27 14:32 ` Bruce Ashfield
2011-10-27 14:32 ` [PATCH 3/3] linux-libc-headers: remove older recipes Bruce Ashfield
2011-11-02 0:41 ` [PATCH 0/3] RFC v3: provide 3.0.x and 3.1 libc headers Bruce Ashfield
3 siblings, 0 replies; 7+ messages in thread
From: Bruce Ashfield @ 2011-10-27 14:32 UTC (permalink / raw)
To: richard.purdie; +Cc: openembedded-core, saul.wold
Provide both a 3.0.x and a 3.1 set of headers to the toolchain.
Compatibility is maintained with older 2.6 headers by creating a
new variable that changes the SRC_URI based on the major version
number of the kernel.
Built and booted with 2.6.37.2, 3.0.8 and 3.1 linux-libc-headers.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
---
meta/conf/distro/include/tcmode-default.inc | 2 +-
| 17 +++++++++++++----
| 7 +++++++
| 7 +++++++
4 files changed, 28 insertions(+), 5 deletions(-)
create mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.0.8.bb
create mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.1.bb
diff --git a/meta/conf/distro/include/tcmode-default.inc b/meta/conf/distro/include/tcmode-default.inc
index 2bf1beb..ed722be 100644
--- a/meta/conf/distro/include/tcmode-default.inc
+++ b/meta/conf/distro/include/tcmode-default.inc
@@ -21,7 +21,7 @@ SDKGCCVERSION ?= "4.6%"
BINUVERSION ?= "2.21.1a"
EGLIBCVERSION ?= "2.13"
UCLIBCVERSION ?= "0.9.32"
-LINUXLIBCVERSION ?= "2.6.37.2"
+LINUXLIBCVERSION ?= "3.1"
# Temporary preferred version overrides for PPC
PREFERRED_VERSION_u-boot-mkimage-native_powerpc ?= "2009.08"
--git a/meta/recipes-kernel/linux-libc-headers/linux-libc-headers.inc b/meta/recipes-kernel/linux-libc-headers/linux-libc-headers.inc
index e586ac3..4137be1 100644
--- a/meta/recipes-kernel/linux-libc-headers/linux-libc-headers.inc
+++ b/meta/recipes-kernel/linux-libc-headers/linux-libc-headers.inc
@@ -1,9 +1,18 @@
-DESCRIPTION = "Sanitized set of 2.6 kernel headers for the C library's use."
+DESCRIPTION = "Sanitized set of kernel headers for the C library's use."
SECTION = "devel"
LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
-SRC_URI = "${KERNELORG_MIRROR}/linux/kernel/v2.6/linux-${PV}.tar.bz2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
+
+python __anonymous () {
+ major = d.getVar("PV",True).split('.')[0]
+ if major == "3":
+ d.setVar("HEADER_FETCH_VER", "3.0")
+ else:
+ d.setVar("HEADER_FETCH_VER", "2.6")
+}
+
+SRC_URI = "${KERNELORG_MIRROR}/linux/kernel/v${HEADER_FETCH_VER}/linux-${PV}.tar.bz2"
S = "${WORKDIR}/linux-${PV}"
@@ -54,4 +63,4 @@ RDEPENDS_${PN}-dev = ""
RRECOMMENDS_${PN}-dbg = "${PN}-dev (= ${EXTENDPKGV})"
INHIBIT_DEFAULT_DEPS = "1"
-DEPENDS += "unifdef-native"
\ No newline at end of file
+DEPENDS += "unifdef-native"
--git a/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.0.8.bb b/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.0.8.bb
new file mode 100644
index 0000000..7bb5895
--- /dev/null
+++ b/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.0.8.bb
@@ -0,0 +1,7 @@
+require linux-libc-headers.inc
+
+PR = "r1"
+
+SRC_URI += " file://connector-msg-size-fix.patch"
+SRC_URI[md5sum] = "eac4d398a0ecd98214487cd47a228998"
+SRC_URI[sha256sum] = "4ed16da319848f681f711dbda2ac2cf1b306a280ec22f90bae190cf23b533add"
--git a/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.1.bb b/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.1.bb
new file mode 100644
index 0000000..b87ecde
--- /dev/null
+++ b/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.1.bb
@@ -0,0 +1,7 @@
+require linux-libc-headers.inc
+
+PR = "r1"
+
+SRC_URI += " file://connector-msg-size-fix.patch"
+SRC_URI[md5sum] = "8d43453f8159b2332ad410b19d86a931"
+SRC_URI[sha256sum] = "2573d2378c754b0c602b57586e9311e5b38c5d1e6c137f02873833633a4b9359"
--
1.7.0.4
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 3/3] linux-libc-headers: remove older recipes
2011-10-27 14:32 [PATCH 0/3] RFC v3: provide 3.0.x and 3.1 libc headers Bruce Ashfield
2011-10-27 14:32 ` [PATCH 1/3] linux-libc-headers: factor common code into linux-libc-headers.inc Bruce Ashfield
2011-10-27 14:32 ` [PATCH 2/3] linux-libc-headers: provide 3.0.x and 3.1 headers Bruce Ashfield
@ 2011-10-27 14:32 ` Bruce Ashfield
2011-11-02 0:41 ` [PATCH 0/3] RFC v3: provide 3.0.x and 3.1 libc headers Bruce Ashfield
3 siblings, 0 replies; 7+ messages in thread
From: Bruce Ashfield @ 2011-10-27 14:32 UTC (permalink / raw)
To: richard.purdie; +Cc: openembedded-core, saul.wold
The default libc-headers is v3.1 and building against the new
headers but booting an older kernel has been shown to work.
Older 2.6 based header builds can easily be reproduced, but
having all the old recipe iterations available is not required.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
---
| 7 -------
| 7 -------
2 files changed, 0 insertions(+), 14 deletions(-)
delete mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.37.2.bb
delete mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.39.bb
diff --git a/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.37.2.bb b/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.37.2.bb
deleted file mode 100644
index c6562b5..0000000
--- a/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.37.2.bb
+++ /dev/null
@@ -1,7 +0,0 @@
-require linux-libc-headers.inc
-
-PR = "r3"
-
-SRC_URI += " file://connector-msg-size-fix.patch"
-SRC_URI[md5sum] = "89f681bc7c917a84aa7470da6eed5101"
-SRC_URI[sha256sum] = "2920c4cd3e87fe40ebee96d28779091548867e1c36f71c1fc3d07e6d5802161f"
diff --git a/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.39.bb b/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.39.bb
deleted file mode 100644
index 36cfb4f..0000000
--- a/meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.39.bb
+++ /dev/null
@@ -1,7 +0,0 @@
-require linux-libc-headers.inc
-
-PR = "r3"
-
-SRC_URI += " file://connector-msg-size-fix.patch"
-SRC_URI[md5sum] = "1aab7a741abe08d42e8eccf20de61e05"
-SRC_URI[sha256sum] = "584d17f2a3ee18a9501d7ff36907639e538cfdba4529978b8550c461d45c61f6"
--
1.7.0.4
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH 0/3] RFC v3: provide 3.0.x and 3.1 libc headers
2011-10-27 14:32 [PATCH 0/3] RFC v3: provide 3.0.x and 3.1 libc headers Bruce Ashfield
` (2 preceding siblings ...)
2011-10-27 14:32 ` [PATCH 3/3] linux-libc-headers: remove older recipes Bruce Ashfield
@ 2011-11-02 0:41 ` Bruce Ashfield
2011-11-02 0:46 ` Saul Wold
3 siblings, 1 reply; 7+ messages in thread
From: Bruce Ashfield @ 2011-11-02 0:41 UTC (permalink / raw)
To: richard.purdie; +Cc: saul.wold, openembedded-core
On Thu, Oct 27, 2011 at 10:32 AM, Bruce Ashfield
<bruce.ashfield@windriver.com> wrote:
> Richard,
>
> Here's v3 of the series, the details are below.
I see no comments on v3. So I'm just bumping the thread. Should I send
a separate
pull request for this, or is this sufficient ?
Bruce
p.s. yes, I realize that everyone is catching up, I just didn't want
to forget myself that
this is out, but not merged or in a known state.
>
> Changes since v2:
>
> - moved more code into the .inc file
> - modifed the python code to not import unnecessary functions and
> to use d.get/setVar.
> - Included an optional patch 3/3 to remove 2.6 based header recipes.
> Whether you want this or not .. is up to you!
>
> Changes since v1:
>
> - factored common code out into the .inc file. Captured in patch 1/2
> - patch 2/2 is the introduction of the new headers
>
> v1 Email is included below:
>
> Here's a RFC patch for updating the toolchain linux-libc headers to 3.x
> variants.
>
> The reason I'm calling it a RFC is:
>
> - I wrote some anonymous python code (and I'm no python coder) to
> deal with 2.6 / 3.0 tgz location differences. This could have
> also been done with a variable set in the recipes and used by
> the .inc. I wasn't sure of the preferred approach, hence the RFC.
> I'll take no offense corrections here.
>
> - I changed the .inc, but didn't bump the PR of the existing recipes
> and didn't remove the existing 2.6 variants. If either of these
> should have been done, let me know and I'll respin.
>
> - I bumped the default to be 3.1. If that's too agressive for the
> default, and we'd prefer 3.0.8, let me know and I'll respin.
>
> I built and booted all the qemu machines with the 3.1 kernel headers. So
> from the testing I was able to do, this looks to be safe and ready to go.
>
> This is based on my yocto repo, I also did the changes in my oe-core
> repository, but I don't have a oe-core contrib branch that I could push to,
> so I chose to send the yocto variant. If someone points me to who I email for
> an oe-core contrib branch, I can push that variant as well.
>
> Cheers,
>
> Bruce
>
>
> The following changes since commit fc94f925e848684244a38dcffe15cb1192dfbed8:
> Martin Jansa (1):
> libxml-parser-perl, libxml-simple-perl, expat, sgmlspl-native, git: bump PR to rebuild after perl upgrade
>
> are available in the git repository at:
>
> git://git.pokylinux.org/poky-contrib zedd/libc-headers-v3
> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=zedd/libc-headers-v3
>
> Bruce Ashfield (3):
> linux-libc-headers: factor common code into linux-libc-headers.inc
> linux-libc-headers: provide 3.0.x and 3.1 headers
> linux-libc-headers: remove older recipes
>
> meta/conf/distro/include/tcmode-default.inc | 2 +-
> .../linux-libc-headers/linux-libc-headers.inc | 62 +++++++++++++++++++-
> .../linux-libc-headers_2.6.37.2.bb | 53 -----------------
> .../linux-libc-headers_2.6.39.bb | 54 -----------------
> .../linux-libc-headers/linux-libc-headers_3.0.8.bb | 7 ++
> .../linux-libc-headers/linux-libc-headers_3.1.bb | 7 ++
> 6 files changed, 74 insertions(+), 111 deletions(-)
> delete mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.37.2.bb
> delete mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.39.bb
> create mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.0.8.bb
> create mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.1.bb
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
--
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH 0/3] RFC v3: provide 3.0.x and 3.1 libc headers
2011-11-02 0:41 ` [PATCH 0/3] RFC v3: provide 3.0.x and 3.1 libc headers Bruce Ashfield
@ 2011-11-02 0:46 ` Saul Wold
2011-11-02 0:47 ` Bruce Ashfield
0 siblings, 1 reply; 7+ messages in thread
From: Saul Wold @ 2011-11-02 0:46 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
On 11/01/2011 05:41 PM, Bruce Ashfield wrote:
> On Thu, Oct 27, 2011 at 10:32 AM, Bruce Ashfield
> <bruce.ashfield@windriver.com> wrote:
>> Richard,
>>
>> Here's v3 of the series, the details are below.
>
> I see no comments on v3. So I'm just bumping the thread. Should I send
> a separate
> pull request for this, or is this sufficient ?
>
Appears that RP merged them in the last day or so. So I guess this is
sufficent, consider them merged into OE-Core!
Thanks
Sau!
> Bruce
>
> p.s. yes, I realize that everyone is catching up, I just didn't want
> to forget myself that
> this is out, but not merged or in a known state.
>
>>
>> Changes since v2:
>>
>> - moved more code into the .inc file
>> - modifed the python code to not import unnecessary functions and
>> to use d.get/setVar.
>> - Included an optional patch 3/3 to remove 2.6 based header recipes.
>> Whether you want this or not .. is up to you!
>>
>> Changes since v1:
>>
>> - factored common code out into the .inc file. Captured in patch 1/2
>> - patch 2/2 is the introduction of the new headers
>>
>> v1 Email is included below:
>>
>> Here's a RFC patch for updating the toolchain linux-libc headers to 3.x
>> variants.
>>
>> The reason I'm calling it a RFC is:
>>
>> - I wrote some anonymous python code (and I'm no python coder) to
>> deal with 2.6 / 3.0 tgz location differences. This could have
>> also been done with a variable set in the recipes and used by
>> the .inc. I wasn't sure of the preferred approach, hence the RFC.
>> I'll take no offense corrections here.
>>
>> - I changed the .inc, but didn't bump the PR of the existing recipes
>> and didn't remove the existing 2.6 variants. If either of these
>> should have been done, let me know and I'll respin.
>>
>> - I bumped the default to be 3.1. If that's too agressive for the
>> default, and we'd prefer 3.0.8, let me know and I'll respin.
>>
>> I built and booted all the qemu machines with the 3.1 kernel headers. So
>> from the testing I was able to do, this looks to be safe and ready to go.
>>
>> This is based on my yocto repo, I also did the changes in my oe-core
>> repository, but I don't have a oe-core contrib branch that I could push to,
>> so I chose to send the yocto variant. If someone points me to who I email for
>> an oe-core contrib branch, I can push that variant as well.
>>
>> Cheers,
>>
>> Bruce
>>
>>
>> The following changes since commit fc94f925e848684244a38dcffe15cb1192dfbed8:
>> Martin Jansa (1):
>> libxml-parser-perl, libxml-simple-perl, expat, sgmlspl-native, git: bump PR to rebuild after perl upgrade
>>
>> are available in the git repository at:
>>
>> git://git.pokylinux.org/poky-contrib zedd/libc-headers-v3
>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=zedd/libc-headers-v3
>>
>> Bruce Ashfield (3):
>> linux-libc-headers: factor common code into linux-libc-headers.inc
>> linux-libc-headers: provide 3.0.x and 3.1 headers
>> linux-libc-headers: remove older recipes
>>
>> meta/conf/distro/include/tcmode-default.inc | 2 +-
>> .../linux-libc-headers/linux-libc-headers.inc | 62 +++++++++++++++++++-
>> .../linux-libc-headers_2.6.37.2.bb | 53 -----------------
>> .../linux-libc-headers_2.6.39.bb | 54 -----------------
>> .../linux-libc-headers/linux-libc-headers_3.0.8.bb | 7 ++
>> .../linux-libc-headers/linux-libc-headers_3.1.bb | 7 ++
>> 6 files changed, 74 insertions(+), 111 deletions(-)
>> delete mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.37.2.bb
>> delete mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.39.bb
>> create mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.0.8.bb
>> create mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.1.bb
>>
>>
>> _______________________________________________
>> Openembedded-core mailing list
>> Openembedded-core@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>>
>
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 0/3] RFC v3: provide 3.0.x and 3.1 libc headers
2011-11-02 0:46 ` Saul Wold
@ 2011-11-02 0:47 ` Bruce Ashfield
0 siblings, 0 replies; 7+ messages in thread
From: Bruce Ashfield @ 2011-11-02 0:47 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer; +Cc: Saul Wold
On 11-11-01 8:46 PM, Saul Wold wrote:
> On 11/01/2011 05:41 PM, Bruce Ashfield wrote:
>> On Thu, Oct 27, 2011 at 10:32 AM, Bruce Ashfield
>> <bruce.ashfield@windriver.com> wrote:
>>> Richard,
>>>
>>> Here's v3 of the series, the details are below.
>>
>> I see no comments on v3. So I'm just bumping the thread. Should I send
>> a separate
>> pull request for this, or is this sufficient ?
>>
>
> Appears that RP merged them in the last day or so. So I guess this is
> sufficent, consider them merged into OE-Core!
Aargh! Thanks, I pulled this morning and didn't see them, but didn't
take a closer look.
I'll check this off my list .. only 4000 things remaining :)
Bruce
>
> Thanks
> Sau!
>
>
>> Bruce
>>
>> p.s. yes, I realize that everyone is catching up, I just didn't want
>> to forget myself that
>> this is out, but not merged or in a known state.
>>
>>>
>>> Changes since v2:
>>>
>>> - moved more code into the .inc file
>>> - modifed the python code to not import unnecessary functions and
>>> to use d.get/setVar.
>>> - Included an optional patch 3/3 to remove 2.6 based header recipes.
>>> Whether you want this or not .. is up to you!
>>>
>>> Changes since v1:
>>>
>>> - factored common code out into the .inc file. Captured in patch 1/2
>>> - patch 2/2 is the introduction of the new headers
>>>
>>> v1 Email is included below:
>>>
>>> Here's a RFC patch for updating the toolchain linux-libc headers to 3.x
>>> variants.
>>>
>>> The reason I'm calling it a RFC is:
>>>
>>> - I wrote some anonymous python code (and I'm no python coder) to
>>> deal with 2.6 / 3.0 tgz location differences. This could have
>>> also been done with a variable set in the recipes and used by
>>> the .inc. I wasn't sure of the preferred approach, hence the RFC.
>>> I'll take no offense corrections here.
>>>
>>> - I changed the .inc, but didn't bump the PR of the existing recipes
>>> and didn't remove the existing 2.6 variants. If either of these
>>> should have been done, let me know and I'll respin.
>>>
>>> - I bumped the default to be 3.1. If that's too agressive for the
>>> default, and we'd prefer 3.0.8, let me know and I'll respin.
>>>
>>> I built and booted all the qemu machines with the 3.1 kernel headers. So
>>> from the testing I was able to do, this looks to be safe and ready to
>>> go.
>>>
>>> This is based on my yocto repo, I also did the changes in my oe-core
>>> repository, but I don't have a oe-core contrib branch that I could
>>> push to,
>>> so I chose to send the yocto variant. If someone points me to who I
>>> email for
>>> an oe-core contrib branch, I can push that variant as well.
>>>
>>> Cheers,
>>>
>>> Bruce
>>>
>>>
>>> The following changes since commit
>>> fc94f925e848684244a38dcffe15cb1192dfbed8:
>>> Martin Jansa (1):
>>> libxml-parser-perl, libxml-simple-perl, expat, sgmlspl-native, git:
>>> bump PR to rebuild after perl upgrade
>>>
>>> are available in the git repository at:
>>>
>>> git://git.pokylinux.org/poky-contrib zedd/libc-headers-v3
>>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=zedd/libc-headers-v3
>>>
>>>
>>> Bruce Ashfield (3):
>>> linux-libc-headers: factor common code into linux-libc-headers.inc
>>> linux-libc-headers: provide 3.0.x and 3.1 headers
>>> linux-libc-headers: remove older recipes
>>>
>>> meta/conf/distro/include/tcmode-default.inc | 2 +-
>>> .../linux-libc-headers/linux-libc-headers.inc | 62 +++++++++++++++++++-
>>> .../linux-libc-headers_2.6.37.2.bb | 53 -----------------
>>> .../linux-libc-headers_2.6.39.bb | 54 -----------------
>>> .../linux-libc-headers/linux-libc-headers_3.0.8.bb | 7 ++
>>> .../linux-libc-headers/linux-libc-headers_3.1.bb | 7 ++
>>> 6 files changed, 74 insertions(+), 111 deletions(-)
>>> delete mode 100644
>>> meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.37.2.bb
>>> delete mode 100644
>>> meta/recipes-kernel/linux-libc-headers/linux-libc-headers_2.6.39.bb
>>> create mode 100644
>>> meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.0.8.bb
>>> create mode 100644
>>> meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.1.bb
>>>
>>>
>>> _______________________________________________
>>> Openembedded-core mailing list
>>> Openembedded-core@lists.openembedded.org
>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>>>
>>
>>
>>
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
^ permalink raw reply [flat|nested] 7+ messages in thread