* [PATCH 1/3] gcc-4.7: Add knowledge about arm hf dynamic loader
2012-05-21 17:11 [PATCH 0/3] ARM hf support Khem Raj
@ 2012-05-21 17:11 ` Khem Raj
2012-05-21 17:11 ` [PATCH 2/3] eglibc: Add ARM hf dynamic linker support Khem Raj
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Khem Raj @ 2012-05-21 17:11 UTC (permalink / raw)
To: openembedded-core
Signed-off-by: Khem Raj <raj.khem@gmail.com>
---
meta/recipes-devtools/gcc/gcc-4.7.inc | 1 +
.../gcc/gcc-4.7/arm-hard-float-loader.patch | 48 ++++++++++++++++++++
2 files changed, 49 insertions(+), 0 deletions(-)
create mode 100644 meta/recipes-devtools/gcc/gcc-4.7/arm-hard-float-loader.patch
diff --git a/meta/recipes-devtools/gcc/gcc-4.7.inc b/meta/recipes-devtools/gcc/gcc-4.7.inc
index efd166c..0321776 100644
--- a/meta/recipes-devtools/gcc/gcc-4.7.inc
+++ b/meta/recipes-devtools/gcc/gcc-4.7.inc
@@ -65,6 +65,7 @@ SRC_URI = "svn://gcc.gnu.org/svn/gcc/branches;module=${BRANCH};proto=http \
file://libgcc-sjlj-check.patch \
file://cpp-honor-sysroot.patch \
file://mips64-default-n64.patch \
+ file://arm-hard-float-loader.patch \
"
S = "${TMPDIR}/work-shared/gcc-${PV}-${PR}/${BRANCH}"
diff --git a/meta/recipes-devtools/gcc/gcc-4.7/arm-hard-float-loader.patch b/meta/recipes-devtools/gcc/gcc-4.7/arm-hard-float-loader.patch
new file mode 100644
index 0000000..dfa0d19
--- /dev/null
+++ b/meta/recipes-devtools/gcc/gcc-4.7/arm-hard-float-loader.patch
@@ -0,0 +1,48 @@
+This patch is still being discussed by probably is almost
+final version. We add the OE notion of multilib on top
+
+Upstream-Status: Backport [ adapted ]
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+
+Index: gcc-4_7-branch/gcc/config/arm/linux-eabi.h
+===================================================================
+--- gcc-4_7-branch.orig/gcc/config/arm/linux-eabi.h 2012-04-30 15:28:31.891863845 -0700
++++ gcc-4_7-branch/gcc/config/arm/linux-eabi.h 2012-04-30 15:37:11.531888994 -0700
+@@ -32,7 +32,8 @@
+ while (false)
+
+ /* We default to a soft-float ABI so that binaries can run on all
+- target hardware. */
++ target hardware. If you override this to use the hard-float ABI then
++ change the setting of GLIBC_DYNAMIC_LINKER_DEFAULT as well. */
+ #undef TARGET_DEFAULT_FLOAT_ABI
+ #define TARGET_DEFAULT_FLOAT_ABI ARM_FLOAT_ABI_SOFT
+
+@@ -59,10 +60,23 @@
+ #undef SUBTARGET_EXTRA_LINK_SPEC
+ #define SUBTARGET_EXTRA_LINK_SPEC " -m " TARGET_LINKER_EMULATION
+
+-/* Use ld-linux.so.3 so that it will be possible to run "classic"
+- GNU/Linux binaries on an EABI system. */
++/* GNU/Linux on ARM currently supports three dynamic linkers:
++ - ld-linux.so.2 - for the legacy ABI
++ - ld-linux.so.3 - for the EABI-derived soft-float ABI
++ - ld-linux-armhf.so.3 - for the EABI-derived hard-float ABI.
++ All the dynamic linkers live in /lib.
++ We default to soft-float, but this can be overridden by changing both
++ GLIBC_DYNAMIC_LINKER_DEFAULT and TARGET_DEFAULT_FLOAT_ABI. */
++
+ #undef GLIBC_DYNAMIC_LINKER
+-#define GLIBC_DYNAMIC_LINKER SYSTEMLIBS_DIR "ld-linux.so.3"
++#define GLIBC_DYNAMIC_LINKER_SOFT_FLOAT SYSTEMLIBS_DIR "ld-linux.so.3"
++#define GLIBC_DYNAMIC_LINKER_HARD_FLOAT SYSTEMLIBS_DIR "ld-linux-armhf.so.3"
++#define GLIBC_DYNAMIC_LINKER_DEFAULT GLIBC_DYNAMIC_LINKER_SOFT_FLOAT
++
++ #define GLIBC_DYNAMIC_LINKER \
++ "%{mfloat-abi=hard:" GLIBC_DYNAMIC_LINKER_HARD_FLOAT "} \
++ %{mfloat-abi=soft*:" GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "} \
++ %{!mfloat-abi=*:" GLIBC_DYNAMIC_LINKER_DEFAULT "}"
+
+ /* At this point, bpabi.h will have clobbered LINK_SPEC. We want to
+ use the GNU/Linux version, not the generic BPABI version. */
--
1.7.5.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 2/3] eglibc: Add ARM hf dynamic linker support
2012-05-21 17:11 [PATCH 0/3] ARM hf support Khem Raj
2012-05-21 17:11 ` [PATCH 1/3] gcc-4.7: Add knowledge about arm hf dynamic loader Khem Raj
@ 2012-05-21 17:11 ` Khem Raj
2012-05-21 17:11 ` [PATCH 3/3] gcc: Grok for callconvention-hard to enable hard float Khem Raj
2012-05-24 17:56 ` [PATCH 0/3] ARM hf support Saul Wold
3 siblings, 0 replies; 5+ messages in thread
From: Khem Raj @ 2012-05-21 17:11 UTC (permalink / raw)
To: openembedded-core
The work is done in glibc upstream we backport
the relevant patches
Signed-off-by: Khem Raj <raj.khem@gmail.com>
---
.../eglibc/eglibc-2.15/add_HAVE_ARM_PCS_VFP.patch | 28 ++
.../eglibc/eglibc-2.15/ldso_arm_hf_support.patch | 338 ++++++++++++++++++++
meta/recipes-core/eglibc/eglibc_2.15.bb | 4 +-
3 files changed, 369 insertions(+), 1 deletions(-)
create mode 100644 meta/recipes-core/eglibc/eglibc-2.15/add_HAVE_ARM_PCS_VFP.patch
create mode 100644 meta/recipes-core/eglibc/eglibc-2.15/ldso_arm_hf_support.patch
diff --git a/meta/recipes-core/eglibc/eglibc-2.15/add_HAVE_ARM_PCS_VFP.patch b/meta/recipes-core/eglibc/eglibc-2.15/add_HAVE_ARM_PCS_VFP.patch
new file mode 100644
index 0000000..0f95c2f
--- /dev/null
+++ b/meta/recipes-core/eglibc/eglibc-2.15/add_HAVE_ARM_PCS_VFP.patch
@@ -0,0 +1,28 @@
+From: Carlos O'Donell <carlos_odonell@mentor.com>
+Date: Mon, 7 May 2012 20:04:41 +0000 (-0400)
+Subject: ARM: Define HAVE_ARM_PCS_VFP in config.h.
+X-Git-Url: http://sourceware.org/git/?p=glibc.git;a=commitdiff_plain;h=6a43ec980c5a0500149ef37d4854eac0e270da6f;hp=05c2c9618f583ea4acd69b3fe5ae2a2922dd2ddc
+
+ARM: Define HAVE_ARM_PCS_VFP in config.h.
+
+If the compiler and flags would select the hard-float ABI
+then the ARM configure fragment will set HAVE_ARM_PCS_VFP.
+This is later used by the ARM shlib-versions to select
+the appropriately named dynamic linker.
+---
+
+Upstream-Status: Backport
+-Khem
+
+Index: libc/config.h.in
+===================================================================
+--- libc.orig/config.h.in 2012-01-04 22:06:28.000000000 -0800
++++ libc/config.h.in 2012-05-08 11:25:56.581079069 -0700
+@@ -233,4 +233,7 @@
+
+ #define HAVE_REGEX 1
+
++/* The ARM hard-float ABI is being used. */
++#undef HAVE_ARM_PCS_VFP
++
+ #endif
diff --git a/meta/recipes-core/eglibc/eglibc-2.15/ldso_arm_hf_support.patch b/meta/recipes-core/eglibc/eglibc-2.15/ldso_arm_hf_support.patch
new file mode 100644
index 0000000..7a53da6
--- /dev/null
+++ b/meta/recipes-core/eglibc/eglibc-2.15/ldso_arm_hf_support.patch
@@ -0,0 +1,338 @@
+From d3b36017d43af570ca7f79e711749dd4ade76979 Mon Sep 17 00:00:00 2001
+From: Carlos O'Donell <carlos_odonell@mentor.com>
+Date: Mon, 7 May 2012 22:14:44 -0400
+Subject: [PATCH] ARM: Use /lib/ld-linux-armhf.so.3 for the hard-float ABI.
+
+The hard-float ABI will now use /lib/ld-linux-armhf.so.3.
+We detect the use of the hard-float ABI and select the
+appropriate dynamic linker name. You must have a new or
+patched compiler which also uses the new dynamic loader
+name when the hard-float ABI is selected.
+---
+ ChangeLog.arm | 8 ++
+ sysdeps/arm/configure | 184 ++++++++++++++++++++++++++++++++++++++++++++
+ sysdeps/arm/configure.in | 17 ++++
+ sysdeps/arm/shlib-versions | 8 ++-
+ 4 files changed, 216 insertions(+), 1 deletions(-)
+ mode change 100644 => 100755 sysdeps/arm/configure
+
+Upstream-Status: Backport
+-Khem
+
+Index: libc/ports/sysdeps/arm/configure.in
+===================================================================
+--- libc.orig/ports/sysdeps/arm/configure.in 2012-05-08 11:42:59.161128560 -0700
++++ libc/ports/sysdeps/arm/configure.in 2012-05-08 11:43:29.373130066 -0700
+@@ -18,3 +18,20 @@
+ if test $libc_cv_asm_cfi_directive_sections != yes; then
+ AC_MSG_ERROR([need .cfi_sections in this configuration])
+ fi
++
++# We check to see if the compiler and flags are
++# selecting the hard-float ABI and if they are then
++# we set libc_cv_arm_pcs_vfp to yes which causes
++# HAVE_ARM_PCS_VFP to be defined in config.h and
++# in include/libc-symbols.h and thus available to
++# shlib-versions to select the appropriate name for
++# the dynamic linker via %ifdef.
++AC_CACHE_CHECK([whether the compiler is using the ARM hard-float ABI],
++ [libc_cv_arm_pcs_vfp],
++ [AC_EGREP_CPP(yes,[#ifdef __ARM_PCS_VFP
++ yes
++ #endif
++ ], libc_cv_arm_pcs_vfp=yes, libc_cv_arm_pcs_vfp=no)])
++if test $libc_cv_arm_pcs_vfp = yes; then
++ AC_DEFINE(HAVE_ARM_PCS_VFP)
++fi
+Index: libc/ports/sysdeps/arm/shlib-versions
+===================================================================
+--- libc.orig/ports/sysdeps/arm/shlib-versions 2012-05-08 11:42:59.145128546 -0700
++++ libc/ports/sysdeps/arm/shlib-versions 2012-05-08 11:43:29.409130022 -0700
+@@ -1,4 +1,10 @@
+ arm.*-.*-linux-gnueabi.* DEFAULT GLIBC_2.4
+
+-arm.*-.*-linux-gnueabi.* ld=ld-linux.so.3
++%ifdef HAVE_ARM_PCS_VFP
++# The EABI-derived hard-float ABI uses a new dynamic linker.
++arm.*-.*-linux-gnueabi.* ld=ld-linux-armhf.so.3
++%else
++# The EABI-derived soft-float ABI continues to use ld-linux.so.3.
++arm.*-.*-linux-gnueabi.* ld=ld-linux.so.3
++%endif
+ arm.*-.*-linux.* ld=ld-linux.so.2
+Index: libc/ports/sysdeps/arm/configure
+===================================================================
+--- libc.orig/ports/sysdeps/arm/configure 2012-05-08 11:43:46.437130836 -0700
++++ libc/ports/sysdeps/arm/configure 2012-05-08 11:49:10.393145653 -0700
+@@ -1,3 +1,100 @@
++# as_fn_set_status STATUS
++# -----------------------
++# Set $? to STATUS, without forking.
++as_fn_set_status ()
++{
++ return $1
++} # as_fn_set_status
++
++# as_fn_exit STATUS
++# -----------------
++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
++as_fn_exit ()
++{
++ set +e
++ as_fn_set_status $1
++ exit $1
++} # as_fn_exit
++# as_fn_arith ARG...
++# ------------------
++# Perform arithmetic evaluation on the ARGs, and store the result in the
++# global $as_val. Take advantage of shells that can avoid forks. The arguments
++# must be portable across $(()) and expr.
++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
++ eval 'as_fn_arith ()
++ {
++ as_val=$(( $* ))
++ }'
++else
++ as_fn_arith ()
++ {
++ as_val=`expr "$@" || test $? -eq 1`
++ }
++fi # as_fn_arith
++
++if expr a : '\(a\)' >/dev/null 2>&1 &&
++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
++ as_basename=basename
++else
++ as_basename=false
++fi
++
++as_me=`$as_basename -- "$0" ||
++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X/"$0" |
++ sed '/^.*\/\([^/][^/]*\)\/*$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++
++
++ as_lineno_1=$LINENO as_lineno_1a=$LINENO
++ as_lineno_2=$LINENO as_lineno_2a=$LINENO
++ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
++ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
++ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
++ sed -n '
++ p
++ /[$]LINENO/=
++ ' <$as_myself |
++ sed '
++ s/[$]LINENO.*/&-/
++ t lineno
++ b
++ :lineno
++ N
++ :loop
++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
++ t loop
++ s/-\n.*//
++ ' >$as_me.lineno &&
++ chmod +x "$as_me.lineno" ||
++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
++
++ # Don't try to exec as it changes $[0], causing all sort of problems
++ # (the dirname of $[0] is not the place where we might find the
++ # original and so on. Autoconf is especially sensitive to this).
++ . "./$as_me.lineno"
++ # Exit status is that of the last command.
++ exit
++}
+ # This file is generated from configure.in by Autoconf. DO NOT EDIT!
+ # Local configure fragment for sysdeps/arm.
+
+@@ -31,3 +128,170 @@
+ $as_echo "$as_me: error: need .cfi_sections in this configuration" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
++
++# We check to see if the compiler and flags are
++# selecting the hard-float ABI and if they are then
++# we set libc_cv_arm_pcs_vfp to yes which causes
++# HAVE_ARM_PCS_VFP to be defined in config.h and
++# in include/libc-symbols.h and thus available to
++# shlib-versions to select the appropriate name for
++# the dynamic linker via %ifdef.
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
++$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
++if ${ac_cv_path_GREP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -z "$GREP"; then
++ ac_path_GREP_found=false
++ # Loop through the user's path and test for each of PROGNAME-LIST
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_prog in grep ggrep; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
++# Check for GNU ac_path_GREP and select it if it is found.
++ # Check for GNU $ac_path_GREP
++case `"$ac_path_GREP" --version 2>&1` in
++*GNU*)
++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
++*)
++ ac_count=0
++ $as_echo_n 0123456789 >"conftest.in"
++ while :
++ do
++ cat "conftest.in" "conftest.in" >"conftest.tmp"
++ mv "conftest.tmp" "conftest.in"
++ cp "conftest.in" "conftest.nl"
++ $as_echo 'GREP' >> "conftest.nl"
++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
++ as_fn_arith $ac_count + 1 && ac_count=$as_val
++ if test $ac_count -gt ${ac_path_GREP_max-0}; then
++ # Best one so far, save it but keep looking for a better one
++ ac_cv_path_GREP="$ac_path_GREP"
++ ac_path_GREP_max=$ac_count
++ fi
++ # 10*(2^10) chars as input seems more than enough
++ test $ac_count -gt 10 && break
++ done
++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
++esac
++
++ $ac_path_GREP_found && break 3
++ done
++ done
++ done
++IFS=$as_save_IFS
++ if test -z "$ac_cv_path_GREP"; then
++ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
++ fi
++else
++ ac_cv_path_GREP=$GREP
++fi
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
++$as_echo "$ac_cv_path_GREP" >&6; }
++ GREP="$ac_cv_path_GREP"
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
++$as_echo_n "checking for egrep... " >&6; }
++if ${ac_cv_path_EGREP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
++ then ac_cv_path_EGREP="$GREP -E"
++ else
++ if test -z "$EGREP"; then
++ ac_path_EGREP_found=false
++ # Loop through the user's path and test for each of PROGNAME-LIST
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_prog in egrep; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
++# Check for GNU ac_path_EGREP and select it if it is found.
++ # Check for GNU $ac_path_EGREP
++case `"$ac_path_EGREP" --version 2>&1` in
++*GNU*)
++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
++*)
++ ac_count=0
++ $as_echo_n 0123456789 >"conftest.in"
++ while :
++ do
++ cat "conftest.in" "conftest.in" >"conftest.tmp"
++ mv "conftest.tmp" "conftest.in"
++ cp "conftest.in" "conftest.nl"
++ $as_echo 'EGREP' >> "conftest.nl"
++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
++ as_fn_arith $ac_count + 1 && ac_count=$as_val
++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
++ # Best one so far, save it but keep looking for a better one
++ ac_cv_path_EGREP="$ac_path_EGREP"
++ ac_path_EGREP_max=$ac_count
++ fi
++ # 10*(2^10) chars as input seems more than enough
++ test $ac_count -gt 10 && break
++ done
++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
++esac
++
++ $ac_path_EGREP_found && break 3
++ done
++ done
++ done
++IFS=$as_save_IFS
++ if test -z "$ac_cv_path_EGREP"; then
++ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
++ fi
++else
++ ac_cv_path_EGREP=$EGREP
++fi
++
++ fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
++$as_echo "$ac_cv_path_EGREP" >&6; }
++ EGREP="$ac_cv_path_EGREP"
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the compiler is using the ARM hard-float ABI" >&5
++$as_echo_n "checking whether the compiler is using the ARM hard-float ABI... " >&6; }
++if ${libc_cv_arm_pcs_vfp+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#ifdef __ARM_PCS_VFP
++ yes
++ #endif
++
++_ACEOF
++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
++ $EGREP "yes" >/dev/null 2>&1; then :
++ libc_cv_arm_pcs_vfp=yes
++else
++ libc_cv_arm_pcs_vfp=no
++fi
++rm -f conftest*
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libc_cv_arm_pcs_vfp" >&5
++$as_echo "$libc_cv_arm_pcs_vfp" >&6; }
++if test $libc_cv_arm_pcs_vfp = yes; then
++ $as_echo "#define HAVE_ARM_PCS_VFP 1" >>confdefs.h
++
++fi
diff --git a/meta/recipes-core/eglibc/eglibc_2.15.bb b/meta/recipes-core/eglibc/eglibc_2.15.bb
index fa92670..6dd846f 100644
--- a/meta/recipes-core/eglibc/eglibc_2.15.bb
+++ b/meta/recipes-core/eglibc/eglibc_2.15.bb
@@ -3,7 +3,7 @@ require eglibc.inc
SRCREV = "17386"
DEPENDS += "gperf-native"
-PR = "r10"
+PR = "r11"
PR_append = "+svnr${SRCPV}"
EGLIBC_BRANCH="eglibc-2_15"
@@ -25,6 +25,8 @@ SRC_URI = "svn://www.eglibc.org/svn/branches/;module=${EGLIBC_BRANCH};proto=http
file://initgroups_keys.patch \
file://use-localstatedir-for-vardbdir.patch \
file://eglibc_fix_findidx_parameters.patch \
+ file://add_HAVE_ARM_PCS_VFP.patch \
+ file://ldso_arm_hf_support.patch \
"
LIC_FILES_CHKSUM = "file://LICENSES;md5=98a1128c4b58120182cbea3b1752d8b9 \
file://COPYING;md5=393a5ca445f6965873eca0259a17f833 \
--
1.7.5.4
^ permalink raw reply related [flat|nested] 5+ messages in thread