From: Robert Yang <liezhi.yang@windriver.com>
To: <openembedded-core@lists.openembedded.org>
Cc: dvhart@linux.intel.com
Subject: [PATCH 0/7] Create ext* filesystems using debugfs
Date: Tue, 26 Feb 2013 17:24:33 +0800 [thread overview]
Message-ID: <cover.1361862860.git.liezhi.yang@windriver.com> (raw)
===Contents===
* Summary
* Brief design
* Test info
* The rootfs generation time changes
* The rootfs size changes
* Summary:
The ext3 and ext4 rootfs generation relied on genext2fs and flipping
some bits to "convert" the ext2 filesystem to ext3 and ext4 in the past,
now we use the mkfs.ext3/ext4 to create the image, and use mkdebugfs.sh
to copy the files to the image.
* Brief design:
- Upgrade the e2fsprogs to the update to date version (the git
repo) which contains the "symlink" command in debugfs shell that we
need.
- Replace the current genext2fs command with mkdebugfs.sh in
image_types.bbclass.
- The new steps to generate the root filesystem are:
-> use "dd" command to make rootfs.ext* file
-> run "mkfs.ext* rootfs.ext*" to create the filesystem
-> run the mkdebugfs.sh to generate the root filesystem
* Test info: (MACHINE = qemuarm, IMAGE_FSTYPES = "ext2 ext3 ext4 tar.bz2")
$ bitbake core-image-minimal core-image-sato meta-toolchain-sdk core-image-sato-sdk
$ runqemu runqemu qemuarm core-image-sato ext3
$ runqemu runqemu qemuarm core-image-minimal ext3
All of them are OK
* The rootfs generation time changes
- For a core-image-minimal generation (IMAGE_FSTYPES="tar.bz2 ext3"):
Before:
$ time bitbake core-image-minimal
real 1m10.823s
user 0m37.108s
sys 0m15.894s
After:
$ time bitbake core-image-minimal
real 1m17.501s
user 0m29.304s
sys 0m20.731s
# 7 seconds lost.
- For a core-image-sato generation (IMAGE_FSTYPES="tar.bz2 ext3"):
Before:
$ time bitbake core-image-sato
real 11m10.645s
user 2m43.503s
sys 1m1.589s
After:
$ time bitbake core-image-sato
real 11m53.131s
user 3m18.988s
sys 2m8.350s
# 43 seconds lost.
* The rootfs size changes
- The image size are the same by "ls -h", but different by "du -sh":
(core-image-sato)
$ ls -lh BEFORE.rootfs.ext3 AFTER.rootfs.ext3 | awk '{print $5"\t"$NF}'
357M BEFORE.rootfs.ext3
357M AFTER.rootfs.ext3
$ du -sh BEFORE.rootfs.ext3 AFTER.rootfs.ext3
238M BEFORE.rootfs.ext3
357M AFTER.rootfs.ext3
It seems that the genext2fs has optimized the rootfs generation.
// Robert
The following changes since commit 2cc4fe4a0874c42421b1bf3fa100160a9e60a9da:
upstream_tracking.inc: Coonectivity and multimedia packages updates (2013-02-25 05:58:20 -0800)
are available in the git repository at:
git://git.pokylinux.org/poky-contrib robert/e2fsprogs
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=robert/e2fsprogs
Robert Yang (7):
e2fsprogs: upgrade to the git version (rename only)
e2fsprogs: upgrade to the git version
e2fsprogs: add the original mkdebugfs.sh
mkdebugfs.sh: convert the tab to 4 spaces
mkdebugfs.sh: several fixes
e2fsprogs: ship mkfsdebug.sh
image_types.bbclass: replace genext2fs with mkdebugfs.sh
meta/classes/image_types.bbclass | 45 +++++-------
meta/recipes-devtools/e2fsprogs/e2fsprogs.inc | 4 +-
.../{e2fsprogs-1.42.6 => e2fsprogs}/acinclude.m4 | 0
.../fallocate.patch | 0
.../e2fsprogs/e2fsprogs/mkdebugfs.sh | 82 ++++++++++++++++++++++
.../{e2fsprogs-1.42.6 => e2fsprogs}/mkdir.patch | 0
.../remove.ldconfig.call.patch | 0
.../{e2fsprogs_1.42.6.bb => e2fsprogs_git.bb} | 6 +-
8 files changed, 106 insertions(+), 31 deletions(-)
rename meta/recipes-devtools/e2fsprogs/{e2fsprogs-1.42.6 => e2fsprogs}/acinclude.m4 (100%)
rename meta/recipes-devtools/e2fsprogs/{e2fsprogs-1.42.6 => e2fsprogs}/fallocate.patch (100%)
create mode 100644 meta/recipes-devtools/e2fsprogs/e2fsprogs/mkdebugfs.sh
rename meta/recipes-devtools/e2fsprogs/{e2fsprogs-1.42.6 => e2fsprogs}/mkdir.patch (100%)
rename meta/recipes-devtools/e2fsprogs/{e2fsprogs-1.42.6 => e2fsprogs}/remove.ldconfig.call.patch (100%)
rename meta/recipes-devtools/e2fsprogs/{e2fsprogs_1.42.6.bb => e2fsprogs_git.bb} (92%)
--
1.7.11.2
next reply other threads:[~2013-02-26 9:37 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-26 9:24 Robert Yang [this message]
2013-02-26 9:24 ` [PATCH 1/7] e2fsprogs: upgrade to the git version (rename only) Robert Yang
2013-02-26 9:24 ` [PATCH 2/7] e2fsprogs: upgrade to the git version Robert Yang
2013-02-26 9:24 ` [PATCH 3/7] e2fsprogs: add the original mkdebugfs.sh Robert Yang
2013-02-26 9:24 ` [PATCH 4/7] mkdebugfs.sh: convert the tab to 4 spaces Robert Yang
2013-02-26 22:59 ` Darren Hart
2013-02-26 9:24 ` [PATCH 5/7] mkdebugfs.sh: several fixes Robert Yang
2013-02-26 17:43 ` Trevor Woerner
2013-02-26 21:50 ` Darren Hart
2013-02-26 9:24 ` [PATCH 6/7] e2fsprogs: ship mkfsdebug.sh Robert Yang
2013-02-26 21:49 ` Darren Hart
2013-02-26 9:24 ` [PATCH 7/7] image_types.bbclass: replace genext2fs with mkdebugfs.sh Robert Yang
2013-02-26 17:53 ` [PATCH 0/7] Create ext* filesystems using debugfs Trevor Woerner
2013-02-26 21:52 ` Darren Hart
2013-02-26 22:37 ` Trevor Woerner
2013-02-26 23:00 ` Darren Hart
2013-02-26 23:01 ` Trevor Woerner
2013-02-26 17:55 ` Saul Wold
2013-02-26 21:58 ` Darren Hart
2013-02-26 18:15 ` Phil Blundell
2013-02-26 22:03 ` Darren Hart
2013-02-27 2:25 ` Robert Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1361862860.git.liezhi.yang@windriver.com \
--to=liezhi.yang@windriver.com \
--cc=dvhart@linux.intel.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox