[PATCH V2 0/4] Fixes for syslog services in systemd

[PATCH V2 0/4] Fixes for syslog services in systemd

[Chen Qi]

The following changes since commit f6a39cc957bf85ff43513f0b76afc3b2c9c906b6:

  sstatesig: fix overrides behaviour to remove SIGGEN_LOCKEDSIGS_i586 (2014-09-17 22:00:05 +0100)

are available in the git repository at:

  git://git.openembedded.org/openembedded-core-contrib ChenQi/systemd-syslog-service
  http://cgit.openembedded.org/cgit.cgi/openembedded-core-contrib/log/?h=ChenQi/systemd-syslog-service

Chen Qi (4):
  systemd: enable syslog.socket by default
  busybox: fix for syslog service in systemd
  sysklogd: add systemd support
  sysklog: comment out configuration regarding xconsole

 meta/recipes-core/busybox/busybox.inc              |   9 +-
 .../busybox/files/busybox-klogd.service.in         |   4 +-
 .../busybox/files/busybox-syslog.service.in        |   7 +-
 meta/recipes-core/systemd/systemd_216.bb           |   2 +
 .../files/0001-syslogd.c-add-systemd-support.patch | 217 +++++++++++++++++++++
 meta/recipes-extended/sysklogd/files/klogd.service |   9 +
 .../sysklogd/files/sysklogd.service                |  14 ++
 meta/recipes-extended/sysklogd/files/syslog.conf   |   8 +-
 meta/recipes-extended/sysklogd/sysklogd.inc        |  37 +++-
 9 files changed, 289 insertions(+), 18 deletions(-)
 create mode 100644 meta/recipes-extended/sysklogd/files/0001-syslogd.c-add-systemd-support.patch
 create mode 100644 meta/recipes-extended/sysklogd/files/klogd.service
 create mode 100644 meta/recipes-extended/sysklogd/files/sysklogd.service

-- 
1.9.1

[PATCH V2 1/4] systemd: enable syslog.socket by default

[Chen Qi]

The syslog daemon behaviour in our systemd system should be like the following
1. If ForwardToSyslog is disabled, no daemon should be started.
2. If ForwardToSyslog is enabled, daemon should be started via socket
   activation. This is very important for OE based system. Because unlike
   other distros, OE allows serveral syslog packages installed into one
   image, using ALTERNATIVE mechanism to manage them. If the syslog
   service is started regardless of socket activation, things crash.
   For example, if there's 'WantedBy=multi-user.target' in the '[Install]'
   section of busybox-syslog.service file, then this service would be started
   anyway, even if syslog.service doesn't point to it. In this case,
   /sbin/syslogd in busybox-syslog.service might be from other syslog packages
   like sysklogd or rsyslog.

This patch is series of patches to implement the above behaviour. The
syslog.socket needs to be enabled by default so that other syslog service
could correctly be activated via socket activation at runtime.

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
---
 meta/recipes-core/systemd/systemd_216.bb | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/meta/recipes-core/systemd/systemd_216.bb b/meta/recipes-core/systemd/systemd_216.bb
index 331da99..e3a0760 100644
--- a/meta/recipes-core/systemd/systemd_216.bb
+++ b/meta/recipes-core/systemd/systemd_216.bb
@@ -148,6 +148,8 @@ do_install() {
 
 	# Enable journal to forward message to syslog daemon
 	sed -i -e 's/.*ForwardToSyslog.*/ForwardToSyslog=yes/' ${D}${sysconfdir}/systemd/journald.conf
+	# Enable syslog.socket by default, this is specific to our system
+	ln -sf ../syslog.socket ${D}${systemd_unitdir}/system/sockets.target.wants/syslog.socket
 }
 
 do_install_ptest () {
-- 
1.9.1

[PATCH V2 2/4] busybox: fix for syslog service in systemd

[Chen Qi]

This patch includes the following changes:
1. Explicitly set StandardOutput of the log daemon to null.
   This would avoid creating a feedback loop of the syslog service.
   See link below for more information.
   http://www.freedesktop.org/wiki/Software/systemd/syslog/

2. Use ALTERNATIVE machanism to manage the syslog service file.
   This is because that other package may also provide a syslog
   implementation.

3. Make the syslog daemon socket activated only. Otherwise, things
   would crash if we install busybox-syslog and other syslog packages
   together in one image.

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
---
 meta/recipes-core/busybox/busybox.inc                     | 9 +++++++--
 meta/recipes-core/busybox/files/busybox-klogd.service.in  | 4 +---
 meta/recipes-core/busybox/files/busybox-syslog.service.in | 7 +++----
 3 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/meta/recipes-core/busybox/busybox.inc b/meta/recipes-core/busybox/busybox.inc
index bd66e4f..a6b205a 100644
--- a/meta/recipes-core/busybox/busybox.inc
+++ b/meta/recipes-core/busybox/busybox.inc
@@ -274,13 +274,12 @@ do_install () {
     if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then
         if grep -q "CONFIG_SYSLOGD=y" ${B}/.config; then
             install -d ${D}${systemd_unitdir}/system
-            sed 's,@base_sbindir@,${base_sbindir},g' < ${WORKDIR}/busybox-syslog.service.in \
+            sed -e 's,@base_sbindir@,${base_sbindir},g' -e 's,@SYSCONFDIR@,${sysconfdir},g' < ${WORKDIR}/busybox-syslog.service.in \
 		> ${D}${systemd_unitdir}/system/busybox-syslog.service
             if [ -f ${WORKDIR}/busybox-syslog.default ] ; then
 		install -d ${D}${sysconfdir}/default
 		install -m 0644 ${WORKDIR}/busybox-syslog.default ${D}${sysconfdir}/default/busybox-syslog
             fi
-            ln -sf /dev/null ${D}${systemd_unitdir}/system/syslog.service
         fi
         if grep -q "CONFIG_KLOGD=y" ${B}/.config; then
             install -d ${D}${systemd_unitdir}/system
@@ -311,6 +310,12 @@ python () {
         d.appendVar('ALTERNATIVE_%s-syslog' % (pn), ' syslog-startup-conf')
         d.setVarFlag('ALTERNATIVE_LINK_NAME', 'syslog-startup-conf', '%s/syslog-startup.conf' % (d.getVar('sysconfdir', True)))
         d.setVarFlag('ALTERNATIVE_TARGET', 'syslog-startup-conf', '%s/syslog-startup.conf.%s' % (d.getVar('sysconfdir', True), d.getVar('BPN', True)))
+
+    if bb.utils.contains('DISTRO_FEATURES', 'systemd', True, False, d):
+        pn = d.getVar('PN', True)
+        d.appendVar('ALTERNATIVE_%s-syslog' % (pn), ' syslog-service')
+        d.setVarFlag('ALTERNATIVE_LINK_NAME', 'syslog-service', '%s/systemd/system/syslog.service' % (d.getVar('sysconfdir', True)))
+        d.setVarFlag('ALTERNATIVE_TARGET', 'syslog-service', '%s/system/busybox-syslog.service' % (d.getVar('systemd_unitdir', True)))
 }
 
 python do_package_prepend () {
diff --git a/meta/recipes-core/busybox/files/busybox-klogd.service.in b/meta/recipes-core/busybox/files/busybox-klogd.service.in
index d7c7755..90cfc50 100644
--- a/meta/recipes-core/busybox/files/busybox-klogd.service.in
+++ b/meta/recipes-core/busybox/files/busybox-klogd.service.in
@@ -3,6 +3,4 @@ Description=Kernel Logging Service
 
 [Service]
 ExecStart=@base_sbindir@/klogd -n
-
-[Install]
-WantedBy=multi-user.target
+StandardOutput=null
diff --git a/meta/recipes-core/busybox/files/busybox-syslog.service.in b/meta/recipes-core/busybox/files/busybox-syslog.service.in
index 2e04321..c84edaf 100644
--- a/meta/recipes-core/busybox/files/busybox-syslog.service.in
+++ b/meta/recipes-core/busybox/files/busybox-syslog.service.in
@@ -1,13 +1,12 @@
 [Unit]
 Description=System Logging Service
 Wants=busybox-klogd.service
+Requires=syslog.socket
 
 [Service]
-EnvironmentFile=-/etc/default/busybox-syslog
+EnvironmentFile=-@SYSCONFDIR@/default/busybox-syslog
 ExecStart=@base_sbindir@/syslogd -n $OPTIONS
-Sockets=syslog.socket
+StandardOutput=null
 
 [Install]
-WantedBy=multi-user.target
 Also=busybox-klogd.service
-Alias=syslog.service
-- 
1.9.1

[PATCH V2 3/4] sysklogd: add systemd support

[Chen Qi]

This patch includes the following changes:
1. Add socket activation support for sysklogd.
2. Add systemd service file.
3. Use ALTERNATIVE mechanism in OE to manage the syslog service.
4. Set ALTERNATIVE_PRIORITY to "100" regardless of whether 'systemd'
   is in DISTRO_FEATURE or not because sysklogd now has systemd support.

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
---
 .../files/0001-syslogd.c-add-systemd-support.patch | 217 +++++++++++++++++++++
 meta/recipes-extended/sysklogd/files/klogd.service |   9 +
 .../sysklogd/files/sysklogd.service                |  14 ++
 meta/recipes-extended/sysklogd/sysklogd.inc        |  37 +++-
 4 files changed, 272 insertions(+), 5 deletions(-)
 create mode 100644 meta/recipes-extended/sysklogd/files/0001-syslogd.c-add-systemd-support.patch
 create mode 100644 meta/recipes-extended/sysklogd/files/klogd.service
 create mode 100644 meta/recipes-extended/sysklogd/files/sysklogd.service

diff --git a/meta/recipes-extended/sysklogd/files/0001-syslogd.c-add-systemd-support.patch b/meta/recipes-extended/sysklogd/files/0001-syslogd.c-add-systemd-support.patch
new file mode 100644
index 0000000..84d216c
--- /dev/null
+++ b/meta/recipes-extended/sysklogd/files/0001-syslogd.c-add-systemd-support.patch
@@ -0,0 +1,217 @@
+Upstream-Status: Pending
+
+Subject: syslogd.c: add systemd support
+
+Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
+---
+ syslogd.c | 147 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--------
+ 1 file changed, 128 insertions(+), 19 deletions(-)
+
+diff --git a/syslogd.c b/syslogd.c
+index acfd8f1..83b067e 100644
+--- a/syslogd.c
++++ b/syslogd.c
+@@ -602,6 +602,9 @@ static char sccsid[] = "@(#)syslogd.c	5.27 (Berkeley) 10/10/88";
+ #define _PATH_LOG	"/dev/log"
+ #endif
+ 
++/* systemd support */
++#define SD_LISTEN_FDS_START 3
++
+ char	*ConfFile = _PATH_LOGCONF;
+ char	*PidFile = _PATH_LOGPID;
+ char	ctty[] = _PATH_CONSOLE;
+@@ -822,6 +825,8 @@ int decode(char *name, struct code *codetab);
+ static void dprintf(char *, ...);
+ static void allocate_log(void);
+ void sighup_handler();
++/* systemd support */
++int sd_listen_fds(void);
+ 
+ #ifdef SYSLOG_UNIXAF
+ static int create_unix_socket(const char *path);
+@@ -963,9 +968,37 @@ int main(argc, argv)
+ 				 */
+ 				exit(1);
+ 			}
++
++			/* We keep stdout and stderr open in case we have to emit something */
++			close(0);
++			i = 3;
++
++			/* Trying to pass on LISTEN_PID with appropriate value */
++			const char *e;
++			unsigned long l;
++			char buf[24] = { '\0' };
++			int sd_fds;
++
++			if ( (e = getenv("LISTEN_PID")) ) {
++				errno = 0;
++				l = strtoul(e, NULL, 10);
++				if (errno == 0) {
++					if (getppid() == (pid_t)l) {
++						snprintf(buf,sizeof(buf), "%d", (int)getpid());
++						setenv("LISTEN_PID", buf, 1);
++					} 
++				}
++			}
++
+ 			signal (SIGTERM, SIG_DFL);
+ 			num_fds = getdtablesize();
+-			for (i= 0; i < num_fds; i++)
++
++			/* close all further fds except of the fds provided by systemd */
++			sd_fds = sd_listen_fds();
++			if (sd_fds > 0) {
++				i = SD_LISTEN_FDS_START + sd_fds;
++			}
++			for ( ; i < num_fds; i++)
+ 				(void) close(i);
+ 			untty();
+ 		}
+@@ -1248,28 +1281,36 @@ static int create_unix_socket(const char *path)
+ {
+ 	struct sockaddr_un sunx;
+ 	int fd;
++	int n;
+ 	char line[MAXLINE +1];
+ 
+-	if (path[0] == '\0')
++	n = sd_listen_fds();
++	if (n > 1) {
+ 		return -1;
+-
+-	(void) unlink(path);
+-
+-	memset(&sunx, 0, sizeof(sunx));
+-	sunx.sun_family = AF_UNIX;
+-	(void) strncpy(sunx.sun_path, path, sizeof(sunx.sun_path));
+-	fd = socket(AF_UNIX, SOCK_DGRAM, 0);
+-	if (fd < 0 || bind(fd, (struct sockaddr *) &sunx,
+-			   sizeof(sunx.sun_family)+strlen(sunx.sun_path)) < 0 ||
+-	    chmod(path, 0666) < 0) {
+-		(void) snprintf(line, sizeof(line), "cannot create %s", path);
+-		logerror(line);
+-		dprintf("cannot create %s (%d).\n", path, errno);
+-		close(fd);
++	} else if (n == 1) {
++		fd = SD_LISTEN_FDS_START + 0;
++	} else {
++		if (path[0] == '\0')
++			return -1;
++
++		(void) unlink(path);
++
++		memset(&sunx, 0, sizeof(sunx));
++		sunx.sun_family = AF_UNIX;
++		(void) strncpy(sunx.sun_path, path, sizeof(sunx.sun_path));
++		fd = socket(AF_UNIX, SOCK_DGRAM, 0);
++		if (fd < 0 || bind(fd, (struct sockaddr *) &sunx,
++				   sizeof(sunx.sun_family)+strlen(sunx.sun_path)) < 0 ||
++		    chmod(path, 0666) < 0) {
++			(void) snprintf(line, sizeof(line), "cannot create %s", path);
++			logerror(line);
++			dprintf("cannot create %s (%d).\n", path, errno);
++			close(fd);
+ #ifndef SYSV
+-		die(0);
++			die(0);
+ #endif
+-		return -1;
++			return -1;
++		}
+ 	}
+ 	return fd;
+ }
+@@ -1998,12 +2039,27 @@ void wallmsg(f, iov)
+ 	/* open the user login file */
+ 	setutent();
+ 
+-
+ 	/*
+ 	 * Might as well fork instead of using nonblocking I/O
+ 	 * and doing notty().
+ 	 */
+ 	if (fork() == 0) {
++		/* Trying to pass on the LISTEN_PID with appropriate value */
++		const char *e;
++		unsigned long l;
++		char buf[24] = { '\0' };
++
++		if ( (e = getenv("LISTEN_PID")) ) {
++			errno = 0;
++			l = strtoul(e, NULL, 10);
++			if (errno == 0) {
++				if (getppid() == (pid_t)l) {
++					snprintf(buf,sizeof(buf), "%d", (int)getpid());
++					setenv("LISTEN_PID", buf, 1);
++				}
++			} 
++		}
++
+ 		(void) signal(SIGTERM, SIG_DFL);
+ 		(void) alarm(0);
+ #ifndef SYSV
+@@ -2896,6 +2952,59 @@ void sighup_handler()
+ 	return;
+ }
+ 
++int sd_listen_fds() {
++	int r, fd;
++	const char *e;
++	unsigned long l;
++
++	e = getenv("LISTEN_PID");
++	if (!e) {
++		return 0;
++	}
++
++	errno = 0;
++	l = strtoul(e, NULL, 10);
++
++	if (errno != 0) {
++		return -errno;
++	}
++
++	if (getpid() != (pid_t)l) {
++		return 0;
++	}
++
++	e = getenv("LISTEN_FDS");
++	if (!e) {
++		return 0;
++	}
++
++	errno = 0;
++	l = strtoul(e, NULL, 10);
++
++	if (errno != 0) {
++		return -errno;
++	}
++
++	for (fd = SD_LISTEN_FDS_START; fd < SD_LISTEN_FDS_START + (int)l; fd++) {
++		int flags;
++
++		flags = fcntl(fd, F_GETFD);
++		if (flags < 0) {
++			return -errno;
++		}
++
++		if (flags & FD_CLOEXEC)
++			continue;
++
++		if (fcntl(fd, F_SETFD, flags | FD_CLOEXEC) < 0) {
++			return -errno;
++		}
++	}
++
++	r = (int)l;
++
++	return r;
++}
+ /*
+  * Local variables:
+  *  c-indent-level: 8
+-- 
+1.9.1
+
diff --git a/meta/recipes-extended/sysklogd/files/klogd.service b/meta/recipes-extended/sysklogd/files/klogd.service
new file mode 100644
index 0000000..cf97e9c
--- /dev/null
+++ b/meta/recipes-extended/sysklogd/files/klogd.service
@@ -0,0 +1,9 @@
+[Unit]
+Description=sysklogd Kernel Logging Service
+
+[Service]
+Type=forking
+EnvironmentFile=-@SYSCONFDIR@/default/klogd
+PIDFile=/var/run/klogd.pid
+ExecStart=@BASE_SBINDIR@/klogd $KLOGD
+StandardOutput=null
diff --git a/meta/recipes-extended/sysklogd/files/sysklogd.service b/meta/recipes-extended/sysklogd/files/sysklogd.service
new file mode 100644
index 0000000..7806320
--- /dev/null
+++ b/meta/recipes-extended/sysklogd/files/sysklogd.service
@@ -0,0 +1,14 @@
+[Unit]
+Description=System Logging Service
+Wants=klogd.service
+Requires=syslog.socket
+
+[Service]
+Type=forking
+EnvironmentFile=-@SYSCONFDIR@/default/sysklogd
+PIDFile=/var/run/syslogd.pid
+ExecStart=@BASE_SBINDIR@/syslogd $SYSLOGD
+StandardOutput=null
+
+[Install]
+Also=klogd.service
diff --git a/meta/recipes-extended/sysklogd/sysklogd.inc b/meta/recipes-extended/sysklogd/sysklogd.inc
index bcf8aa7..acaa32d 100644
--- a/meta/recipes-extended/sysklogd/sysklogd.inc
+++ b/meta/recipes-extended/sysklogd/sysklogd.inc
@@ -11,12 +11,15 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=8ca43cbc842c2336e835926c2166c28b \
                     file://klogd.c;beginline=2;endline=19;md5=7e87ed0ae6142de079bce738c10c899d \
                    "
 
-inherit update-rc.d update-alternatives
+inherit update-rc.d systemd update-alternatives
 
 SRC_URI = "http://www.infodrom.org/projects/sysklogd/download/sysklogd-${PV}.tar.gz \
            file://no-strip-install.patch \
+           file://0001-syslogd.c-add-systemd-support.patch \
            file://sysklogd \
            file://syslog.conf \
+           file://sysklogd.service \
+           file://klogd.service \
            "
 
 SRC_URI_append_e500v2 = " file://no-vectorization.patch"
@@ -24,6 +27,8 @@ SRC_URI_append_e500v2 = " file://no-vectorization.patch"
 INITSCRIPT_NAME = "syslog"
 CONFFILES_${PN} = "${sysconfdir}/syslog.conf.${BPN}"
 
+SYSTEMD_SERVICE_${PN} = "sysklogd.service"
+
 CFLAGS_append = " -DSYSV"
 
 do_install () {
@@ -35,20 +40,42 @@ do_install () {
 	install -d ${D}${sysconfdir}
 	install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/syslog.conf
 	install -d ${D}${sysconfdir}/init.d
-	install -m 755 ${WORKDIR}/sysklogd ${D}${sysconfdir}/init.d/syslog
+	install -m 755 ${WORKDIR}/sysklogd ${D}${sysconfdir}/init.d/syslog.${BPN}
+
+        install -d ${D}${systemd_unitdir}/system
+        install -m 0644 ${WORKDIR}/sysklogd.service ${D}${systemd_unitdir}/system
+        install -m 0644 ${WORKDIR}/klogd.service ${D}${systemd_unitdir}/system
+	sed -i -e 's,@BASE_SBINDIR@,${base_sbindir},g' \
+		-e 's,@SYSCONFDIR@,${sysconfdir},g' \
+		${D}${systemd_unitdir}/system/*.service
 }
 
 # sysklogd package has no internal systemd support, so we weigh busybox's
 # sysklogd utility over it in case of systemd
-ALTERNATIVE_PRIORITY = "${@bb.utils.contains('DISTRO_FEATURES','systemd','10','100',d)}"
+#ALTERNATIVE_PRIORITY = "${@bb.utils.contains('DISTRO_FEATURES','systemd','10','100',d)}"
+ALTERNATIVE_PRIORITY = '100'
 
-ALTERNATIVE_${PN} = "syslogd klogd syslog-init syslog-conf"
+ALTERNATIVE_${PN} = "syslogd klogd syslog-conf"
 
 ALTERNATIVE_LINK_NAME[syslogd] = "${base_sbindir}/syslogd"
 ALTERNATIVE_LINK_NAME[klogd] = "${base_sbindir}/klogd"
-ALTERNATIVE_LINK_NAME[syslog-init] = "${sysconfdir}/init.d/syslog"
 ALTERNATIVE_LINK_NAME[syslog-conf] = "${sysconfdir}/syslog.conf"
 
+python () {
+    if bb.utils.contains('DISTRO_FEATURES', 'sysvinit', True, False, d):
+        pn = d.getVar('PN', True)
+        sysconfdir = d.getVar('sysconfdir', True)
+        d.appendVar('ALTERNATIVE_%s' % (pn), ' syslog-init')
+        d.setVarFlag('ALTERNATIVE_LINK_NAME', 'syslog-init', '%s/init.d/syslog' % (sysconfdir))
+        d.setVarFlag('ALTERNATIVE_TARGET', 'syslog-init', '%s/init.d/syslog.%s' % (d.getVar('sysconfdir', True), d.getVar('BPN', True)))
+
+    if bb.utils.contains('DISTRO_FEATURES', 'systemd', True, False, d):
+        pn = d.getVar('PN', True)
+        d.appendVar('ALTERNATIVE_%s' % (pn), ' syslog-service')
+        d.setVarFlag('ALTERNATIVE_LINK_NAME', 'syslog-service', '%s/systemd/system/syslog.service' % (d.getVar('sysconfdir', True)))
+        d.setVarFlag('ALTERNATIVE_TARGET', 'syslog-service', '%s/system/sysklogd.service' % (d.getVar('systemd_unitdir', True)))
+}
+
 pkg_prerm_${PN} () {
 	if test "x$D" = "x"; then
 	if test "$1" = "upgrade" -o "$1" = "remove"; then
-- 
1.9.1

[PATCH V2 4/4] sysklog: comment out configuration regarding xconsole

[Chen Qi]

I commented out these configurations for the following reasons:
We don't have xconsole utility in OE. These configurations are useless
for us.

Besides, the /dev/xconsole device is created in the init script which means
if these configuration are enabled, we need to add a script in sysklogd which
creates /dev/xconsole and is invoked in ExecStartPre in the sysklogd's service
file.

I think it's better that we just comment these lines out.

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
---
 meta/recipes-extended/sysklogd/files/syslog.conf | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/meta/recipes-extended/sysklogd/files/syslog.conf b/meta/recipes-extended/sysklogd/files/syslog.conf
index 0849de1..46a734c 100644
--- a/meta/recipes-extended/sysklogd/files/syslog.conf
+++ b/meta/recipes-extended/sysklogd/files/syslog.conf
@@ -64,8 +64,8 @@ mail,news.none		-/var/log/messages
 # NOTE: adjust the list below, or you'll go crazy if you have a reasonably
 #      busy site..
 #
-daemon.*;mail.*;\
-news.err;\
-*.=debug;*.=info;\
-*.=notice;*.=warn	|/dev/xconsole
+#daemon.*;mail.*;\
+#news.err;\
+#*.=debug;*.=info;\
+#*.=notice;*.=warn	|/dev/xconsole
 
-- 
1.9.1