Openembedded Core Discussions
 help / color / mirror / Atom feed
* zimage Initramfs booting stuck at Start Kernel
@ 2019-10-26  9:46 JH
  2019-10-26 21:20 ` Ferry Toth
  0 siblings, 1 reply; 12+ messages in thread
From: JH @ 2019-10-26  9:46 UTC (permalink / raw)
  To: openembedded-core

Hi,

I finally built the
zImage->zImage--4.19.75+git0+d573e8a79f-r0-20191026074920.bin and
zImage-initramfs ->
zImage-initramfs--4.19.75+git0+d573e8a79f-r0-20191026074920.bin based
on oe-core kernel.bbclass.

The zImage could be loaded by u-boot on RAM booting but failed at
mount rootfs which was fine as it did not bundle the rootfs. The
zImage-initramfs bundled to rootfs, but it could not be started and
stuck at u-boot Starting kernel, there was no trace of errors.

Hit any key to stop autoboot:  0
=> bootz ${loadaddr} - ${fdt_addr}
Kernel image @ 0x80800000 [ 0x000000 - 0x219df80 ]
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Using Device Tree in place at 83000000, end 83008831
ft_system_setup for mx6

Starting kernel ...

Because zImage could be started, zImage-initramfs could not, that
implies there were no issues in the u-boot, is must be something wrong
with the zImage-initramfs. Seems debug is harder, are there anyway to
extract information from zImage-initramfs to figure out what is wrong?

Thank you.

Kind regards,

- jh


^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2019-10-29 20:42 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-10-26  9:46 zimage Initramfs booting stuck at Start Kernel JH
2019-10-26 21:20 ` Ferry Toth
2019-10-27  0:27   ` JH
2019-10-27 12:24     ` Ferry Toth
2019-10-27 21:52       ` JH
2019-10-27 22:27         ` Ferry Toth
2019-10-28  2:02           ` JH
2019-10-28 20:46             ` Ferry Toth
2019-10-29  6:27               ` JH
2019-10-29 10:25               ` JH
2019-10-29 17:37                 ` Ferry Toth
2019-10-29 20:42                   ` JH

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox