* Transferring images to flash avr32
@ 2008-11-12 16:33 Gerwin van der Kruis
2008-11-13 14:08 ` Leon Woestenberg
0 siblings, 1 reply; 4+ messages in thread
From: Gerwin van der Kruis @ 2008-11-12 16:33 UTC (permalink / raw)
To: openembedded-devel
Dear All,
I managed to succesfully compile the images for avr32 .
I want to use tftp and u-boot to boot the images on my ATNGW100 board.
Is there somewhere a manual how to put the images on the board ?
Or can somebody sent me the steps necessary ?
Regards,
Gerwin
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Transferring images to flash avr32
2008-11-12 16:33 Transferring images to flash avr32 Gerwin van der Kruis
@ 2008-11-13 14:08 ` Leon Woestenberg
2008-11-13 15:03 ` Gerwin van der Kruis
0 siblings, 1 reply; 4+ messages in thread
From: Leon Woestenberg @ 2008-11-13 14:08 UTC (permalink / raw)
To: openembedded-devel
Gerwin,
On Wed, Nov 12, 2008 at 5:33 PM, Gerwin van der Kruis
<gerwin@vanderkruis.net> wrote:
> I managed to succesfully compile the images for avr32 .
>
> I want to use tftp and u-boot to boot the images on my ATNGW100 board.
>
> Is there somewhere a manual how to put the images on the board ?
>
What is your starting point?
Do you have an existing u-boot in FlashROM?
Do you have a JTAG programmer (the Atmel specific programming device,
cannot remember its name, it's blue-ish).
Regards,
--
Leon
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Transferring images to flash avr32
2008-11-13 14:08 ` Leon Woestenberg
@ 2008-11-13 15:03 ` Gerwin van der Kruis
2008-11-14 3:37 ` Gerwin van der Kruis
0 siblings, 1 reply; 4+ messages in thread
From: Gerwin van der Kruis @ 2008-11-13 15:03 UTC (permalink / raw)
To: openembedded-devel
On Thursday 13 November 2008 15:08:17 Leon Woestenberg wrote:
> Gerwin,
>
> On Wed, Nov 12, 2008 at 5:33 PM, Gerwin van der Kruis
>
> <gerwin@vanderkruis.net> wrote:
> > I managed to succesfully compile the images for avr32 .
> >
> > I want to use tftp and u-boot to boot the images on my ATNGW100 board.
> >
> > Is there somewhere a manual how to put the images on the board ?
>
> What is your starting point?
>
> Do you have an existing u-boot in FlashROM?
Yes
> Do you have a JTAG programmer (the Atmel specific programming device,
> cannot remember its name, it's blue-ish).
>
No
> Regards,
Regards,
Gerwin
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Transferring images to flash avr32
2008-11-13 15:03 ` Gerwin van der Kruis
@ 2008-11-14 3:37 ` Gerwin van der Kruis
0 siblings, 0 replies; 4+ messages in thread
From: Gerwin van der Kruis @ 2008-11-14 3:37 UTC (permalink / raw)
To: openembedded-devel
On Thursday 13 November 2008 16:03:56 Gerwin van der Kruis wrote:
> On Thursday 13 November 2008 15:08:17 Leon Woestenberg wrote:
> > Gerwin,
> >
> > On Wed, Nov 12, 2008 at 5:33 PM, Gerwin van der Kruis
> >
> > <gerwin@vanderkruis.net> wrote:
> > > I managed to succesfully compile the images for avr32 .
> > >
> > > I want to use tftp and u-boot to boot the images on my ATNGW100 board.
> > >
> > > Is there somewhere a manual how to put the images on the board ?
Problem solved managed to load images.
If I load an old minimal-image it works , the atngw100 is booting .
With a new freshly compiled image it is booting but than dies with a signal 11
in init.
I am unsure why this is .
Regards,
Gerwin
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-11-14 3:39 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-11-12 16:33 Transferring images to flash avr32 Gerwin van der Kruis
2008-11-13 14:08 ` Leon Woestenberg
2008-11-13 15:03 ` Gerwin van der Kruis
2008-11-14 3:37 ` Gerwin van der Kruis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox