* [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace
@ 2010-03-05 15:55 Adrian Alonso
0 siblings, 0 replies; 16+ messages in thread
From: Adrian Alonso @ 2010-03-05 15:55 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
---
files/device_table_add-xsa.txt | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
create mode 100644 files/device_table_add-xsa.txt
diff --git a/files/device_table_add-xsa.txt b/files/device_table_add-xsa.txt
new file mode 100644
index 0000000..a7b8429
--- /dev/null
+++ b/files/device_table_add-xsa.txt
@@ -0,0 +1,5 @@
+# Add nodes for xilinx system ace
+/dev/xsa b 640 0 0 125 0 0 0 -
+/dev/xsa1 b 640 0 1 125 0 0 0 -
+/dev/xsa2 b 640 0 2 125 0 0 0 -
+/dev/xsa3 b 640 0 3 125 0 0 0 -
--
1.6.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace
@ 2010-03-05 23:15 Adrian Alonso
2010-03-05 23:15 ` [PATCH 2/7] defconfig: xilinx ml507 kernel config Adrian Alonso
2010-03-16 19:00 ` [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace Stefan Schmidt
0 siblings, 2 replies; 16+ messages in thread
From: Adrian Alonso @ 2010-03-05 23:15 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
---
files/device_table_add-xsa.txt | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
create mode 100644 files/device_table_add-xsa.txt
diff --git a/files/device_table_add-xsa.txt b/files/device_table_add-xsa.txt
new file mode 100644
index 0000000..a7b8429
--- /dev/null
+++ b/files/device_table_add-xsa.txt
@@ -0,0 +1,5 @@
+# Add nodes for xilinx system ace
+/dev/xsa b 640 0 0 125 0 0 0 -
+/dev/xsa1 b 640 0 1 125 0 0 0 -
+/dev/xsa2 b 640 0 2 125 0 0 0 -
+/dev/xsa3 b 640 0 3 125 0 0 0 -
--
1.6.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 2/7] defconfig: xilinx ml507 kernel config
2010-03-05 23:15 [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace Adrian Alonso
@ 2010-03-05 23:15 ` Adrian Alonso
2010-03-05 23:15 ` [PATCH 3/7] linux-xilinx-ml507_git: new kernel recipe for xilinx ml507 Adrian Alonso
2010-03-16 19:00 ` [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace Stefan Schmidt
1 sibling, 1 reply; 16+ messages in thread
From: Adrian Alonso @ 2010-03-05 23:15 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
---
recipes/linux/linux-xilinx-ml507/defconfig | 1415 ++++++++++++++++++++++++++++
1 files changed, 1415 insertions(+), 0 deletions(-)
create mode 100644 recipes/linux/linux-xilinx-ml507/defconfig
diff --git a/recipes/linux/linux-xilinx-ml507/defconfig b/recipes/linux/linux-xilinx-ml507/defconfig
new file mode 100644
index 0000000..693e141
--- /dev/null
+++ b/recipes/linux/linux-xilinx-ml507/defconfig
@@ -0,0 +1,1415 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Fri Feb 26 23:31:02 2010
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_32 is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+# CONFIG_PPC_FPU is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_PPC_DCR_NATIVE=y
+CONFIG_PPC_DCR_MMIO=y
+CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
+# CONFIG_YOSEMITE is not set
+CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+# CONFIG_XILINX_ML510 is not set
+# CONFIG_PPC44x_SIMPLE is not set
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_XILINX_VIRTEX=y
+CONFIG_XILINX_VIRTEX_5_FXT=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_XILINX_PCI is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS="simpleImage.virtex440-ml507 simpleImage.initrd.virtex440-ml507"
+CONFIG_SECCOMP=y
+# CONFIG_COMPRESSED_DEVICE_TREE is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XILINX_SYSACE=y
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_XILINX_DRIVERS=y
+CONFIG_NEED_XILINX_LLDMA=y
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMAC is not set
+# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_XILINX_TEMAC is not set
+# CONFIG_ATL1E is not set
+CONFIG_XILINX_LLTEMAC=y
+# CONFIG_XILINX_LLTEMAC_MARVELL_88E1111_RGMII is not set
+CONFIG_XILINX_LLTEMAC_MARVELL_88E1111_GMII=y
+# CONFIG_XILINX_LLTEMAC_MARVELL_88E1111_MII is not set
+# CONFIG_XILINX_LLTEMAC_NATIONAL_DP83865_GMII is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_XILINXPS2 is not set
+CONFIG_SERIO_XILINX_XPS_PS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_XILINX_EDK=y
+CONFIG_XILINX_LLDMA_USE_DCR=y
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+CONFIG_JFS_FS=y
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
--
1.6.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 3/7] linux-xilinx-ml507_git: new kernel recipe for xilinx ml507
2010-03-05 23:15 ` [PATCH 2/7] defconfig: xilinx ml507 kernel config Adrian Alonso
@ 2010-03-05 23:15 ` Adrian Alonso
2010-03-05 23:15 ` [PATCH 4/7] xilinx-bsp.bbclass: add support " Adrian Alonso
0 siblings, 1 reply; 16+ messages in thread
From: Adrian Alonso @ 2010-03-05 23:15 UTC (permalink / raw)
To: openembedded-devel
* Based on the oficial xilinx repo since not all drivers are in the
* mainline kernel tree
* Make use off the xilinx-bsp bbclass to override device tree descriptor
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
---
recipes/linux/linux-xilinx-ml507_git.bb | 24 ++++++++++++++++++++++++
1 files changed, 23 insertions(+), 0 deletions(-)
create mode 100644 recipes/linux/linux-xilinx-ml507_git.bb
diff --git a/recipes/linux/linux-xilinx-ml507_git.bb b/recipes/linux/linux-xilinx-ml507_git.bb
new file mode 100644
index 0000000..2cbe689
--- /dev/null
+++ b/recipes/linux/linux-xilinx-ml507_git.bb
@@ -0,0 +1,23 @@
+require linux.inc
+
+DESCRIPTION = "Linux kernel for Xilinx ml507 platform"
+KERNEL_RELEASE = "2.6.32+git"
+
+COMPATIBLE_MACHINE = "xilinx-ml507"
+DEFAULT_PREFERENCE = "-1"
+DEFAULT_PREFERENCE_xilinx-ml507 = "1"
+
+PV = "${KERNEL_RELEASE}"
+PR = "r0"
+
+SRCREV = "dc53725d22405e384b984d222542f526eaa9b829"
+SRC_URI = "git://git.xilinx.com/linux-2.6-xlnx.git;protocol=git \
+ file://defconfig"
+
+inherit kernel xilinx-bsp
+
+S = "${WORKDIR}/git"
+
+do_configure_prepend() {
+ install -m 0644 ${WORKDIR}/defconfig ${S}/.config
+}
--
1.6.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 4/7] xilinx-bsp.bbclass: add support for xilinx ml507
2010-03-05 23:15 ` [PATCH 3/7] linux-xilinx-ml507_git: new kernel recipe for xilinx ml507 Adrian Alonso
@ 2010-03-05 23:15 ` Adrian Alonso
2010-03-05 23:15 ` [PATCH 5/7] linux.inc: add device tree " Adrian Alonso
0 siblings, 1 reply; 16+ messages in thread
From: Adrian Alonso @ 2010-03-05 23:15 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
---
classes/xilinx-bsp.bbclass | 52 ++++++++++++++++++++++---------------------
1 files changed, 27 insertions(+), 25 deletions(-)
diff --git a/classes/xilinx-bsp.bbclass b/classes/xilinx-bsp.bbclass
index f657e5b..8b44ec8 100644
--- a/classes/xilinx-bsp.bbclass
+++ b/classes/xilinx-bsp.bbclass
@@ -3,7 +3,7 @@
#
#This class handles all the intricasies of getting the required files from the
#ISE/EDK/project to the kernel and prepare the kernel for compilation.
-#The Xilinx EDK supports 2 different architectures : PowerPC (ppc 405) and Microblaze
+#The Xilinx EDK supports 2 different architectures : PowerPC (ppc 405,440) and Microblaze
#Only the PowerPC BSP has been tested so far
#For this to work correctly you need to add XILINX_BSP_PATH and XILINX_BOARD to your
#local.conf
@@ -12,38 +12,40 @@
#
#Currently supported boards
#Xilinx ML403
+#Xilinx ML507
#More to come soon ;)
do_configure_prepend() {
-
#first check that the XILINX_BSP_PATH and XILINX_BOARD have been defined in local.conf
-if [ -z "${XILINX_BSP_PATH}" ]; then
- oefatal "XILINX_BSP_PATH not defined ! Exiting..."
- exit 1
-
-else
- if [ -z "${XILINX_BOARD}" ]; then
- oefatal "XILINX_BOARD not defined ! Exiting"
- exit 1
- fi
-
-fi
#now depending on the board type and arch do what is nessesary
-case "${XILINX_BOARD}" in
- ML403)
- oenote "ML403 board setup"
- cp -pPR ${XILINX_BSP_PATH}/ppc405_0/libsrc/linux_2_6_v1_00_a/linux/arch/ppc/platforms/4xx/xparameters/xparameters_ml40x.h \
+if [ -n "${XILINX_BSP_PATH}" ]; then
+ case "${XILINX_BOARD}" in
+ ml403 | ML403)
+ oenote "ML403 board setup"
+ cp -pPR ${XILINX_BSP_PATH}/ppc405_0/libsrc/linux_2_6_v1_00_a/linux/arch/ppc/platforms/4xx/xparameters/xparameters_ml40x.h \
${S}/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
- ;;
-
- * )
- oefatal "! Unknow Xilinx board ! Exiting..."
- exit 1
- ;;
-esac
-
+ ;;
+ ml507 | ML507)
+ oenote "Xilinx ML507 board setup"
+ dts=`find "${XILINX_BSP_PATH}" -name *.dts -print`
+ if [ -n "$dts" ]; then
+ oenote "Replacing device tree with ${dts}"
+ cp -pP ${dts} ${S}/arch/powerpc/boot/dts/virtex440-ml507.dts
+ else
+ oenote "Device tree not found in project dir"
+ fi
+ ;;
+ *)
+ oefatal "! Unknow Xilinx board ! Exit ..."
+ exit 1
+ ;;
+ esac
+else
+ oefatal "XILINX_BSP_PATH not defined ! Exit"
+ exit 1
+fi
}
--
1.6.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 5/7] linux.inc: add device tree for xilinx ml507
2010-03-05 23:15 ` [PATCH 4/7] xilinx-bsp.bbclass: add support " Adrian Alonso
@ 2010-03-05 23:15 ` Adrian Alonso
2010-03-05 23:15 ` [PATCH 6/7] tune-ppc440.inc: add base to extra archs Adrian Alonso
0 siblings, 1 reply; 16+ messages in thread
From: Adrian Alonso @ 2010-03-05 23:15 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
---
recipes/linux/linux.inc | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/recipes/linux/linux.inc b/recipes/linux/linux.inc
index 6c2ce31..bcba0aa 100644
--- a/recipes/linux/linux.inc
+++ b/recipes/linux/linux.inc
@@ -38,6 +38,7 @@ KERNEL_DEVICETREE_mpc8313e-rdb = "arch/${ARCH}/boot/dts/mpc8313erdb.dts"
KERNEL_DEVICETREE_mpc8315e-rdb = "arch/${ARCH}/boot/dts/mpc8315erdb.dts"
KERNEL_DEVICETREE_mpc8323e-rdb = "arch/${ARCH}/boot/dts/mpc832x_rdb.dts"
KERNEL_DEVICETREE_sequoia = "arch/${ARCH}/boot/dts/sequoia.dts"
+KERNEL_DEVICETREE_xilinx-ml507 = "arch/${ARCH}/boot/dts/virtex440-ml507.dts"
KERNEL_DEVICETREE_FLAGS = "-R 8 -S 0x3000"
--
1.6.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 6/7] tune-ppc440.inc: add base to extra archs
2010-03-05 23:15 ` [PATCH 5/7] linux.inc: add device tree " Adrian Alonso
@ 2010-03-05 23:15 ` Adrian Alonso
2010-03-05 23:15 ` [PATCH 7/7] xilinx-ml507.conf: new config file for ml507 devboard Adrian Alonso
0 siblings, 1 reply; 16+ messages in thread
From: Adrian Alonso @ 2010-03-05 23:15 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
---
conf/machine/include/tune-ppc440.inc | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/conf/machine/include/tune-ppc440.inc b/conf/machine/include/tune-ppc440.inc
index feca186..1c94a34 100644
--- a/conf/machine/include/tune-ppc440.inc
+++ b/conf/machine/include/tune-ppc440.inc
@@ -1,4 +1,4 @@
TARGET_CC_ARCH = "-mcpu=440"
BASE_PACKAGE_ARCH = "ppc440"
FEED_ARCH = "ppc440"
-PACKAGE_EXTRA_ARCHS += "ppc440e"
+PACKAGE_EXTRA_ARCHS += "${BASE_PACKAGE_ARCH} ppc440e"
--
1.6.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 7/7] xilinx-ml507.conf: new config file for ml507 devboard
2010-03-05 23:15 ` [PATCH 6/7] tune-ppc440.inc: add base to extra archs Adrian Alonso
@ 2010-03-05 23:15 ` Adrian Alonso
0 siblings, 0 replies; 16+ messages in thread
From: Adrian Alonso @ 2010-03-05 23:15 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
---
conf/machine/xilinx-ml507.conf | 38 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 38 insertions(+), 0 deletions(-)
create mode 100644 conf/machine/xilinx-ml507.conf
diff --git a/conf/machine/xilinx-ml507.conf b/conf/machine/xilinx-ml507.conf
new file mode 100644
index 0000000..bcb83a5
--- /dev/null
+++ b/conf/machine/xilinx-ml507.conf
@@ -0,0 +1,38 @@
+# Copyright (C) 2010, Adrian Alonso <aalonso00@gmail.com>
+# Released under the MIT license (see packages/COPYING)
+#@TYPE: Machine
+#@Name: Xilinx ML507 FPGA Development Platform
+#@DESCRIPTION: Machine configuration for Xilinx ML507
+
+TARGET_ARCH = "powerpc"
+TARGET_CPU = "440"
+TARGET_FPU = "soft"
+#tune for the 440 cpu
+require conf/machine/include/tune-ppc440.inc
+
+#ASSUME_PROVIDED += "virtual/kernel"
+PREFERRED_PROVIDER_virtual/kernel = "linux-xilinx-ml507"
+
+KERNEL_IMAGETYPE = "uImage"
+
+MACHINE_FEATURES = "kernel26 apm ext2 vfat ethernet"
+MACHINE_EXTRA_RECOMMENDS = "kernel-modules"
+
+UBOOT_ARCH = "ppc"
+UBOOT_MACHINE = "ml507_config"
+UBOOT_ENTRYPOINT ?= "0x00000000"
+UBOOT_LOADADDRESS ?= "0x00000000"
+PREFERRED_VERSION_u-boot_xilinx-ml507 = "git"
+
+# Xilinx EDK override hardware definitions for xilinx-bsp
+# Include in your local.conf
+# XILINX_BSP_PATH = "complete path for Xilinx XPS project"
+# XILINX_BOARD = "ml507"
+
+# Don't use tty1
+USE_VT = "0"
+SERIAL_CONSOLE = "9600 ttyS0"
+
+# Device nodes add xsa for (system ace)
+IMAGE_DEVICE_TABLES = "files/device_table-minimal.txt \
+ files/device_table_add-xsa.txt"
--
1.6.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace
2010-03-05 23:15 [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace Adrian Alonso
2010-03-05 23:15 ` [PATCH 2/7] defconfig: xilinx ml507 kernel config Adrian Alonso
@ 2010-03-16 19:00 ` Stefan Schmidt
2010-03-17 22:00 ` Adrian Alonso
1 sibling, 1 reply; 16+ messages in thread
From: Stefan Schmidt @ 2010-03-16 19:00 UTC (permalink / raw)
To: openembedded-devel
Hello.
Back from holiday I found the time to test your patches. I needed to adjust one
manually due to a change going in between but that was easy enough.
I tested and pushed them out now. Please test on your side if everything is ok
and thanks for your contribution.
regards
Stefan Schmidt
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace
2010-03-16 19:00 ` [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace Stefan Schmidt
@ 2010-03-17 22:00 ` Adrian Alonso
2010-03-17 23:00 ` Khem Raj
0 siblings, 1 reply; 16+ messages in thread
From: Adrian Alonso @ 2010-03-17 22:00 UTC (permalink / raw)
To: openembedded-devel
Hi,
I tested on my previous build and everything is ok (tested console-image);
Building from scratch arise a build error with "gcc-cross_4.3.3.bb failed"
I'm going to track the changes in gcc-cross recipe to find out why is
falling
The complete error log can be found at [1].
[1] http://pastebin.com/2m4TP2Vs
Regards
Adrian Alonso
On Tue, Mar 16, 2010 at 1:00 PM, Stefan Schmidt
<stefan@datenfreihafen.org>wrote:
> Hello.
>
> Back from holiday I found the time to test your patches. I needed to adjust
> one
> manually due to a change going in between but that was easy enough.
>
> I tested and pushed them out now. Please test on your side if everything is
> ok
> and thanks for your contribution.
>
> regards
> Stefan Schmidt
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
--
Saludos
Adrian Alonso
http://aalonso.wordpress.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace
2010-03-17 22:00 ` Adrian Alonso
@ 2010-03-17 23:00 ` Khem Raj
2010-03-18 16:42 ` Adrian Alonso
0 siblings, 1 reply; 16+ messages in thread
From: Khem Raj @ 2010-03-17 23:00 UTC (permalink / raw)
To: openembedded-devel
On Wed, Mar 17, 2010 at 3:00 PM, Adrian Alonso <aalonso00@gmail.com> wrote:
> Hi,
>
> I tested on my previous build and everything is ok (tested console-image);
>
> Building from scratch arise a build error with "gcc-cross_4.3.3.bb failed"
> I'm going to track the changes in gcc-cross recipe to find out why is
> falling
> The complete error log can be found at [1].
>
> [1] http://pastebin.com/2m4TP2Vs
seems more like your gcc on host is causing the problem here. What
host os do you have
and try to clean and rebuild gcc-cross that might fix it.
>
> Regards
> Adrian Alonso
>
> On Tue, Mar 16, 2010 at 1:00 PM, Stefan Schmidt
> <stefan@datenfreihafen.org>wrote:
>
>> Hello.
>>
>> Back from holiday I found the time to test your patches. I needed to adjust
>> one
>> manually due to a change going in between but that was easy enough.
>>
>> I tested and pushed them out now. Please test on your side if everything is
>> ok
>> and thanks for your contribution.
>>
>> regards
>> Stefan Schmidt
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>
>
>
>
> --
> Saludos
> Adrian Alonso
> http://aalonso.wordpress.com
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace
2010-03-17 23:00 ` Khem Raj
@ 2010-03-18 16:42 ` Adrian Alonso
2010-03-18 19:05 ` Khem Raj
0 siblings, 1 reply; 16+ messages in thread
From: Adrian Alonso @ 2010-03-18 16:42 UTC (permalink / raw)
To: openembedded-devel
Hi Khem,
My host OS is
Fedora 12 2.6.32.9-70.fc12.x86_64
Gcc version installed in my system
gcc (GCC) 4.4.3 20100127
which is the late's version available
cleaning and rebuilding gcc-cross doesn't make the error go away
A complete log can be found at [1].
[1] http://pastebin.com/BftKvgGA
Regards
On Wed, Mar 17, 2010 at 5:00 PM, Khem Raj <raj.khem@gmail.com> wrote:
> On Wed, Mar 17, 2010 at 3:00 PM, Adrian Alonso <aalonso00@gmail.com>
> wrote:
> > Hi,
> >
> > I tested on my previous build and everything is ok (tested
> console-image);
> >
> > Building from scratch arise a build error with "gcc-cross_4.3.3.bbfailed"
> > I'm going to track the changes in gcc-cross recipe to find out why is
> > falling
> > The complete error log can be found at [1].
> >
> > [1] http://pastebin.com/2m4TP2Vs
>
> seems more like your gcc on host is causing the problem here. What
> host os do you have
> and try to clean and rebuild gcc-cross that might fix it.
>
> >
> > Regards
> > Adrian Alonso
> >
> > On Tue, Mar 16, 2010 at 1:00 PM, Stefan Schmidt
> > <stefan@datenfreihafen.org>wrote:
> >
> >> Hello.
> >>
> >> Back from holiday I found the time to test your patches. I needed to
> adjust
> >> one
> >> manually due to a change going in between but that was easy enough.
> >>
> >> I tested and pushed them out now. Please test on your side if everything
> is
> >> ok
> >> and thanks for your contribution.
> >>
> >> regards
> >> Stefan Schmidt
> >>
> >> _______________________________________________
> >> Openembedded-devel mailing list
> >> Openembedded-devel@lists.openembedded.org
> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >>
> >
> >
> >
> > --
> > Saludos
> > Adrian Alonso
> > http://aalonso.wordpress.com
> > _______________________________________________
> > Openembedded-devel mailing list
> > Openembedded-devel@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
--
Saludos
Adrian Alonso
http://aalonso.wordpress.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace
2010-03-18 16:42 ` Adrian Alonso
@ 2010-03-18 19:05 ` Khem Raj
2010-03-18 22:09 ` Adrian Alonso
0 siblings, 1 reply; 16+ messages in thread
From: Khem Raj @ 2010-03-18 19:05 UTC (permalink / raw)
To: openembedded-devel
On Thu, Mar 18, 2010 at 9:42 AM, Adrian Alonso <aalonso00@gmail.com> wrote:
> Hi Khem,
>
> My host OS is
> Fedora 12 2.6.32.9-70.fc12.x86_64
>
> Gcc version installed in my system
> gcc (GCC) 4.4.3 20100127
>
> which is the late's version available
>
> cleaning and rebuilding gcc-cross doesn't make the error go away
>
> A complete log can be found at [1].
>
> [1] http://pastebin.com/BftKvgGA
go to your build directory and search of you have fixincl.o generated.
if yes then try to run file on it and see if it is for right
architecture which will be your host
or do some elf dumping to see if the file is a proper object.
I have gcc 4.4.3 too on my ubuntu/lucid box and I dont see the error you get
so it must have something to do with either the linker or assembler or
compiler on your host
-Khem
>
>
> Regards
>
> On Wed, Mar 17, 2010 at 5:00 PM, Khem Raj <raj.khem@gmail.com> wrote:
>
>> On Wed, Mar 17, 2010 at 3:00 PM, Adrian Alonso <aalonso00@gmail.com>
>> wrote:
>> > Hi,
>> >
>> > I tested on my previous build and everything is ok (tested
>> console-image);
>> >
>> > Building from scratch arise a build error with "gcc-cross_4.3.3.bbfailed"
>> > I'm going to track the changes in gcc-cross recipe to find out why is
>> > falling
>> > The complete error log can be found at [1].
>> >
>> > [1] http://pastebin.com/2m4TP2Vs
>>
>> seems more like your gcc on host is causing the problem here. What
>> host os do you have
>> and try to clean and rebuild gcc-cross that might fix it.
>>
>> >
>> > Regards
>> > Adrian Alonso
>> >
>> > On Tue, Mar 16, 2010 at 1:00 PM, Stefan Schmidt
>> > <stefan@datenfreihafen.org>wrote:
>> >
>> >> Hello.
>> >>
>> >> Back from holiday I found the time to test your patches. I needed to
>> adjust
>> >> one
>> >> manually due to a change going in between but that was easy enough.
>> >>
>> >> I tested and pushed them out now. Please test on your side if everything
>> is
>> >> ok
>> >> and thanks for your contribution.
>> >>
>> >> regards
>> >> Stefan Schmidt
>> >>
>> >> _______________________________________________
>> >> Openembedded-devel mailing list
>> >> Openembedded-devel@lists.openembedded.org
>> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>> >>
>> >
>> >
>> >
>> > --
>> > Saludos
>> > Adrian Alonso
>> > http://aalonso.wordpress.com
>> > _______________________________________________
>> > Openembedded-devel mailing list
>> > Openembedded-devel@lists.openembedded.org
>> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>> >
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>
>
>
>
> --
> Saludos
> Adrian Alonso
> http://aalonso.wordpress.com
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace
2010-03-18 19:05 ` Khem Raj
@ 2010-03-18 22:09 ` Adrian Alonso
2010-03-18 22:11 ` Khem Raj
0 siblings, 1 reply; 16+ messages in thread
From: Adrian Alonso @ 2010-03-18 22:09 UTC (permalink / raw)
To: openembedded-devel
Hi Khem,
gcc-cross-initial-4.3.3 and gcc-cross-intermediate-4.3.3 build correctly
fixincl.o object
tmp/work/ppc440-angstrom-linux/gcc-cross-initial-4.3.3-r11.1/gcc-4.3.3/build.x86_64-linux.powerpc-angstrom-linux/fixincludes/fixincl.o:
ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
tmp/work/ppc440-angstrom-linux/gcc-cross-intermediate-4.3.3-r11.1/gcc-4.3.3/build.x86_64-linux.powerpc-angstrom-linux/fixincludes/fixincl.o:
ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
but gcc-cross fixincl.o reports
tmp/work/ppc440-angstrom-linux/gcc-cross-4.3.3-r11.1/gcc-4.3.3/build.x86_64-linux.powerpc-angstrom-linux/fixincludes/fixincl.o:
empty
But is not the only object file that is not been generated
ls -lah
tmp/work/ppc440-angstrom-linux/gcc-cross-4.3.3-r11.1/gcc-4.3.3/build.x86_64-linux.powerpc-angstrom-linux/fixincludes
total 160K
drwxrwxr-x. 2 aalonso aalonso 4.0K 2010-03-18 15:19 .
drwxrwxr-x. 9 aalonso aalonso 4.0K 2010-03-18 15:19 ..
-rw-rw-r--. 1 aalonso aalonso 6.1K 2010-03-18 15:18 config.cache
-rw-rw-r--. 1 aalonso aalonso 6.4K 2010-03-18 15:18 config.h
-rw-rw-r--. 1 aalonso aalonso 59K 2010-03-18 15:18 config.log
-rwxrwxr-x. 1 aalonso aalonso 38K 2010-03-18 15:18 config.status
-rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixfixes.o
-rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixincl.o
-rwxr-xr-x. 1 aalonso aalonso 14K 2010-03-18 15:19 fixinc.sh
-rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixlib.o
-rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixopts.o
-rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixtests.o
-rw-rw-r--. 1 aalonso aalonso 6.1K 2010-03-18 15:18 Makefile
-rw-rw-r--. 1 aalonso aalonso 3.6K 2010-03-18 15:19 mkheaders
-rw-rw-r--. 1 aalonso aalonso 3.6K 2010-03-18 15:18 mkheaders.almost
-rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 procopen.o
-rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 server.o
-rw-rw-r--. 1 aalonso aalonso 10 2010-03-18 15:18 stamp-h
Any advise on how to fix this is welcome.
Regards
Adrian Alonso
On Thu, Mar 18, 2010 at 1:05 PM, Khem Raj <raj.khem@gmail.com> wrote:
> On Thu, Mar 18, 2010 at 9:42 AM, Adrian Alonso <aalonso00@gmail.com>
> wrote:
> > Hi Khem,
> >
> > My host OS is
> > Fedora 12 2.6.32.9-70.fc12.x86_64
> >
> > Gcc version installed in my system
> > gcc (GCC) 4.4.3 20100127
> >
> > which is the late's version available
> >
> > cleaning and rebuilding gcc-cross doesn't make the error go away
> >
> > A complete log can be found at [1].
> >
> > [1] http://pastebin.com/BftKvgGA
>
>
> go to your build directory and search of you have fixincl.o generated.
> if yes then try to run file on it and see if it is for right
> architecture which will be your host
> or do some elf dumping to see if the file is a proper object.
>
> I have gcc 4.4.3 too on my ubuntu/lucid box and I dont see the error you
> get
> so it must have something to do with either the linker or assembler or
> compiler on your host
>
> -Khem
>
> >
> >
> > Regards
> >
> > On Wed, Mar 17, 2010 at 5:00 PM, Khem Raj <raj.khem@gmail.com> wrote:
> >
> >> On Wed, Mar 17, 2010 at 3:00 PM, Adrian Alonso <aalonso00@gmail.com>
> >> wrote:
> >> > Hi,
> >> >
> >> > I tested on my previous build and everything is ok (tested
> >> console-image);
> >> >
> >> > Building from scratch arise a build error with
> "gcc-cross_4.3.3.bbfailed"
> >> > I'm going to track the changes in gcc-cross recipe to find out why is
> >> > falling
> >> > The complete error log can be found at [1].
> >> >
> >> > [1] http://pastebin.com/2m4TP2Vs
> >>
> >> seems more like your gcc on host is causing the problem here. What
> >> host os do you have
> >> and try to clean and rebuild gcc-cross that might fix it.
> >>
> >> >
> >> > Regards
> >> > Adrian Alonso
> >> >
> >> > On Tue, Mar 16, 2010 at 1:00 PM, Stefan Schmidt
> >> > <stefan@datenfreihafen.org>wrote:
> >> >
> >> >> Hello.
> >> >>
> >> >> Back from holiday I found the time to test your patches. I needed to
> >> adjust
> >> >> one
> >> >> manually due to a change going in between but that was easy enough.
> >> >>
> >> >> I tested and pushed them out now. Please test on your side if
> everything
> >> is
> >> >> ok
> >> >> and thanks for your contribution.
> >> >>
> >> >> regards
> >> >> Stefan Schmidt
> >> >>
> >> >> _______________________________________________
> >> >> Openembedded-devel mailing list
> >> >> Openembedded-devel@lists.openembedded.org
> >> >>
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >> >>
> >> >
> >> >
> >> >
> >> > --
> >> > Saludos
> >> > Adrian Alonso
> >> > http://aalonso.wordpress.com
> >> > _______________________________________________
> >> > Openembedded-devel mailing list
> >> > Openembedded-devel@lists.openembedded.org
> >> >
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >> >
> >>
> >> _______________________________________________
> >> Openembedded-devel mailing list
> >> Openembedded-devel@lists.openembedded.org
> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >>
> >
> >
> >
> > --
> > Saludos
> > Adrian Alonso
> > http://aalonso.wordpress.com
> > _______________________________________________
> > Openembedded-devel mailing list
> > Openembedded-devel@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
--
Saludos
Adrian Alonso
http://aalonso.wordpress.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace
2010-03-18 22:09 ` Adrian Alonso
@ 2010-03-18 22:11 ` Khem Raj
2010-03-19 14:09 ` Adrian Alonso
0 siblings, 1 reply; 16+ messages in thread
From: Khem Raj @ 2010-03-18 22:11 UTC (permalink / raw)
To: openembedded-devel
On Thu, Mar 18, 2010 at 3:09 PM, Adrian Alonso <aalonso00@gmail.com> wrote:
> Hi Khem,
>
> gcc-cross-initial-4.3.3 and gcc-cross-intermediate-4.3.3 build correctly
> fixincl.o object
>
> tmp/work/ppc440-angstrom-linux/gcc-cross-initial-4.3.3-r11.1/gcc-4.3.3/build.x86_64-linux.powerpc-angstrom-linux/fixincludes/fixincl.o:
> ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
>
> tmp/work/ppc440-angstrom-linux/gcc-cross-intermediate-4.3.3-r11.1/gcc-4.3.3/build.x86_64-linux.powerpc-angstrom-linux/fixincludes/fixincl.o:
> ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
>
> but gcc-cross fixincl.o reports
>
> tmp/work/ppc440-angstrom-linux/gcc-cross-4.3.3-r11.1/gcc-4.3.3/build.x86_64-linux.powerpc-angstrom-linux/fixincludes/fixincl.o:
> empty
>
> But is not the only object file that is not been generated
I think your host has buggy ccache installation. Disable ccache or
rather remove it from your build box and retry.
>
> ls -lah
> tmp/work/ppc440-angstrom-linux/gcc-cross-4.3.3-r11.1/gcc-4.3.3/build.x86_64-linux.powerpc-angstrom-linux/fixincludes
> total 160K
> drwxrwxr-x. 2 aalonso aalonso 4.0K 2010-03-18 15:19 .
> drwxrwxr-x. 9 aalonso aalonso 4.0K 2010-03-18 15:19 ..
> -rw-rw-r--. 1 aalonso aalonso 6.1K 2010-03-18 15:18 config.cache
> -rw-rw-r--. 1 aalonso aalonso 6.4K 2010-03-18 15:18 config.h
> -rw-rw-r--. 1 aalonso aalonso 59K 2010-03-18 15:18 config.log
> -rwxrwxr-x. 1 aalonso aalonso 38K 2010-03-18 15:18 config.status
> -rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixfixes.o
> -rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixincl.o
> -rwxr-xr-x. 1 aalonso aalonso 14K 2010-03-18 15:19 fixinc.sh
> -rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixlib.o
> -rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixopts.o
> -rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixtests.o
> -rw-rw-r--. 1 aalonso aalonso 6.1K 2010-03-18 15:18 Makefile
> -rw-rw-r--. 1 aalonso aalonso 3.6K 2010-03-18 15:19 mkheaders
> -rw-rw-r--. 1 aalonso aalonso 3.6K 2010-03-18 15:18 mkheaders.almost
> -rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 procopen.o
> -rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 server.o
> -rw-rw-r--. 1 aalonso aalonso 10 2010-03-18 15:18 stamp-h
>
> Any advise on how to fix this is welcome.
>
> Regards
> Adrian Alonso
>
> On Thu, Mar 18, 2010 at 1:05 PM, Khem Raj <raj.khem@gmail.com> wrote:
>
>> On Thu, Mar 18, 2010 at 9:42 AM, Adrian Alonso <aalonso00@gmail.com>
>> wrote:
>> > Hi Khem,
>> >
>> > My host OS is
>> > Fedora 12 2.6.32.9-70.fc12.x86_64
>> >
>> > Gcc version installed in my system
>> > gcc (GCC) 4.4.3 20100127
>> >
>> > which is the late's version available
>> >
>> > cleaning and rebuilding gcc-cross doesn't make the error go away
>> >
>> > A complete log can be found at [1].
>> >
>> > [1] http://pastebin.com/BftKvgGA
>>
>>
>> go to your build directory and search of you have fixincl.o generated.
>> if yes then try to run file on it and see if it is for right
>> architecture which will be your host
>> or do some elf dumping to see if the file is a proper object.
>>
>> I have gcc 4.4.3 too on my ubuntu/lucid box and I dont see the error you
>> get
>> so it must have something to do with either the linker or assembler or
>> compiler on your host
>>
>> -Khem
>>
>> >
>> >
>> > Regards
>> >
>> > On Wed, Mar 17, 2010 at 5:00 PM, Khem Raj <raj.khem@gmail.com> wrote:
>> >
>> >> On Wed, Mar 17, 2010 at 3:00 PM, Adrian Alonso <aalonso00@gmail.com>
>> >> wrote:
>> >> > Hi,
>> >> >
>> >> > I tested on my previous build and everything is ok (tested
>> >> console-image);
>> >> >
>> >> > Building from scratch arise a build error with
>> "gcc-cross_4.3.3.bbfailed"
>> >> > I'm going to track the changes in gcc-cross recipe to find out why is
>> >> > falling
>> >> > The complete error log can be found at [1].
>> >> >
>> >> > [1] http://pastebin.com/2m4TP2Vs
>> >>
>> >> seems more like your gcc on host is causing the problem here. What
>> >> host os do you have
>> >> and try to clean and rebuild gcc-cross that might fix it.
>> >>
>> >> >
>> >> > Regards
>> >> > Adrian Alonso
>> >> >
>> >> > On Tue, Mar 16, 2010 at 1:00 PM, Stefan Schmidt
>> >> > <stefan@datenfreihafen.org>wrote:
>> >> >
>> >> >> Hello.
>> >> >>
>> >> >> Back from holiday I found the time to test your patches. I needed to
>> >> adjust
>> >> >> one
>> >> >> manually due to a change going in between but that was easy enough.
>> >> >>
>> >> >> I tested and pushed them out now. Please test on your side if
>> everything
>> >> is
>> >> >> ok
>> >> >> and thanks for your contribution.
>> >> >>
>> >> >> regards
>> >> >> Stefan Schmidt
>> >> >>
>> >> >> _______________________________________________
>> >> >> Openembedded-devel mailing list
>> >> >> Openembedded-devel@lists.openembedded.org
>> >> >>
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>> >> >>
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > Saludos
>> >> > Adrian Alonso
>> >> > http://aalonso.wordpress.com
>> >> > _______________________________________________
>> >> > Openembedded-devel mailing list
>> >> > Openembedded-devel@lists.openembedded.org
>> >> >
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>> >> >
>> >>
>> >> _______________________________________________
>> >> Openembedded-devel mailing list
>> >> Openembedded-devel@lists.openembedded.org
>> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>> >>
>> >
>> >
>> >
>> > --
>> > Saludos
>> > Adrian Alonso
>> > http://aalonso.wordpress.com
>> > _______________________________________________
>> > Openembedded-devel mailing list
>> > Openembedded-devel@lists.openembedded.org
>> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>> >
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>
>
>
>
> --
> Saludos
> Adrian Alonso
> http://aalonso.wordpress.com
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace
2010-03-18 22:11 ` Khem Raj
@ 2010-03-19 14:09 ` Adrian Alonso
0 siblings, 0 replies; 16+ messages in thread
From: Adrian Alonso @ 2010-03-19 14:09 UTC (permalink / raw)
To: openembedded-devel
Hi Khem,
Disabling ccache works.
Thanks for the advise, I will check on Fedora's bugtrack if some else
has experience this kind of problems with cchache.
Regards.
On Thu, Mar 18, 2010 at 4:11 PM, Khem Raj <raj.khem@gmail.com> wrote:
> On Thu, Mar 18, 2010 at 3:09 PM, Adrian Alonso <aalonso00@gmail.com>
> wrote:
> > Hi Khem,
> >
> > gcc-cross-initial-4.3.3 and gcc-cross-intermediate-4.3.3 build correctly
> > fixincl.o object
> >
> >
> tmp/work/ppc440-angstrom-linux/gcc-cross-initial-4.3.3-r11.1/gcc-4.3.3/build.x86_64-linux.powerpc-angstrom-linux/fixincludes/fixincl.o:
> > ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
> >
> >
> tmp/work/ppc440-angstrom-linux/gcc-cross-intermediate-4.3.3-r11.1/gcc-4.3.3/build.x86_64-linux.powerpc-angstrom-linux/fixincludes/fixincl.o:
> > ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
> >
> > but gcc-cross fixincl.o reports
> >
> >
> tmp/work/ppc440-angstrom-linux/gcc-cross-4.3.3-r11.1/gcc-4.3.3/build.x86_64-linux.powerpc-angstrom-linux/fixincludes/fixincl.o:
> > empty
> >
> > But is not the only object file that is not been generated
>
>
> I think your host has buggy ccache installation. Disable ccache or
> rather remove it from your build box and retry.
>
> >
> > ls -lah
> >
> tmp/work/ppc440-angstrom-linux/gcc-cross-4.3.3-r11.1/gcc-4.3.3/build.x86_64-linux.powerpc-angstrom-linux/fixincludes
> > total 160K
> > drwxrwxr-x. 2 aalonso aalonso 4.0K 2010-03-18 15:19 .
> > drwxrwxr-x. 9 aalonso aalonso 4.0K 2010-03-18 15:19 ..
> > -rw-rw-r--. 1 aalonso aalonso 6.1K 2010-03-18 15:18 config.cache
> > -rw-rw-r--. 1 aalonso aalonso 6.4K 2010-03-18 15:18 config.h
> > -rw-rw-r--. 1 aalonso aalonso 59K 2010-03-18 15:18 config.log
> > -rwxrwxr-x. 1 aalonso aalonso 38K 2010-03-18 15:18 config.status
> > -rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixfixes.o
> > -rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixincl.o
> > -rwxr-xr-x. 1 aalonso aalonso 14K 2010-03-18 15:19 fixinc.sh
> > -rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixlib.o
> > -rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixopts.o
> > -rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 fixtests.o
> > -rw-rw-r--. 1 aalonso aalonso 6.1K 2010-03-18 15:18 Makefile
> > -rw-rw-r--. 1 aalonso aalonso 3.6K 2010-03-18 15:19 mkheaders
> > -rw-rw-r--. 1 aalonso aalonso 3.6K 2010-03-18 15:18 mkheaders.almost
> > -rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 procopen.o
> > -rw-rw-r--. 1 aalonso aalonso 0 2010-03-18 15:19 server.o
> > -rw-rw-r--. 1 aalonso aalonso 10 2010-03-18 15:18 stamp-h
> >
> > Any advise on how to fix this is welcome.
> >
> > Regards
> > Adrian Alonso
> >
> > On Thu, Mar 18, 2010 at 1:05 PM, Khem Raj <raj.khem@gmail.com> wrote:
> >
> >> On Thu, Mar 18, 2010 at 9:42 AM, Adrian Alonso <aalonso00@gmail.com>
> >> wrote:
> >> > Hi Khem,
> >> >
> >> > My host OS is
> >> > Fedora 12 2.6.32.9-70.fc12.x86_64
> >> >
> >> > Gcc version installed in my system
> >> > gcc (GCC) 4.4.3 20100127
> >> >
> >> > which is the late's version available
> >> >
> >> > cleaning and rebuilding gcc-cross doesn't make the error go away
> >> >
> >> > A complete log can be found at [1].
> >> >
> >> > [1] http://pastebin.com/BftKvgGA
> >>
> >>
> >> go to your build directory and search of you have fixincl.o generated.
> >> if yes then try to run file on it and see if it is for right
> >> architecture which will be your host
> >> or do some elf dumping to see if the file is a proper object.
> >>
> >> I have gcc 4.4.3 too on my ubuntu/lucid box and I dont see the error you
> >> get
> >> so it must have something to do with either the linker or assembler or
> >> compiler on your host
> >>
> >> -Khem
> >>
> >> >
> >> >
> >> > Regards
> >> >
> >> > On Wed, Mar 17, 2010 at 5:00 PM, Khem Raj <raj.khem@gmail.com> wrote:
> >> >
> >> >> On Wed, Mar 17, 2010 at 3:00 PM, Adrian Alonso <aalonso00@gmail.com>
> >> >> wrote:
> >> >> > Hi,
> >> >> >
> >> >> > I tested on my previous build and everything is ok (tested
> >> >> console-image);
> >> >> >
> >> >> > Building from scratch arise a build error with
> >> "gcc-cross_4.3.3.bbfailed"
> >> >> > I'm going to track the changes in gcc-cross recipe to find out why
> is
> >> >> > falling
> >> >> > The complete error log can be found at [1].
> >> >> >
> >> >> > [1] http://pastebin.com/2m4TP2Vs
> >> >>
> >> >> seems more like your gcc on host is causing the problem here. What
> >> >> host os do you have
> >> >> and try to clean and rebuild gcc-cross that might fix it.
> >> >>
> >> >> >
> >> >> > Regards
> >> >> > Adrian Alonso
> >> >> >
> >> >> > On Tue, Mar 16, 2010 at 1:00 PM, Stefan Schmidt
> >> >> > <stefan@datenfreihafen.org>wrote:
> >> >> >
> >> >> >> Hello.
> >> >> >>
> >> >> >> Back from holiday I found the time to test your patches. I needed
> to
> >> >> adjust
> >> >> >> one
> >> >> >> manually due to a change going in between but that was easy
> enough.
> >> >> >>
> >> >> >> I tested and pushed them out now. Please test on your side if
> >> everything
> >> >> is
> >> >> >> ok
> >> >> >> and thanks for your contribution.
> >> >> >>
> >> >> >> regards
> >> >> >> Stefan Schmidt
> >> >> >>
> >> >> >> _______________________________________________
> >> >> >> Openembedded-devel mailing list
> >> >> >> Openembedded-devel@lists.openembedded.org
> >> >> >>
> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >> >> >>
> >> >> >
> >> >> >
> >> >> >
> >> >> > --
> >> >> > Saludos
> >> >> > Adrian Alonso
> >> >> > http://aalonso.wordpress.com
> >> >> > _______________________________________________
> >> >> > Openembedded-devel mailing list
> >> >> > Openembedded-devel@lists.openembedded.org
> >> >> >
> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >> >> >
> >> >>
> >> >> _______________________________________________
> >> >> Openembedded-devel mailing list
> >> >> Openembedded-devel@lists.openembedded.org
> >> >>
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >> >>
> >> >
> >> >
> >> >
> >> > --
> >> > Saludos
> >> > Adrian Alonso
> >> > http://aalonso.wordpress.com
> >> > _______________________________________________
> >> > Openembedded-devel mailing list
> >> > Openembedded-devel@lists.openembedded.org
> >> >
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >> >
> >>
> >> _______________________________________________
> >> Openembedded-devel mailing list
> >> Openembedded-devel@lists.openembedded.org
> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >>
> >
> >
> >
> > --
> > Saludos
> > Adrian Alonso
> > http://aalonso.wordpress.com
> > _______________________________________________
> > Openembedded-devel mailing list
> > Openembedded-devel@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
--
Saludos
Adrian Alonso
http://aalonso.wordpress.com
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2010-03-19 14:12 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-03-05 23:15 [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace Adrian Alonso
2010-03-05 23:15 ` [PATCH 2/7] defconfig: xilinx ml507 kernel config Adrian Alonso
2010-03-05 23:15 ` [PATCH 3/7] linux-xilinx-ml507_git: new kernel recipe for xilinx ml507 Adrian Alonso
2010-03-05 23:15 ` [PATCH 4/7] xilinx-bsp.bbclass: add support " Adrian Alonso
2010-03-05 23:15 ` [PATCH 5/7] linux.inc: add device tree " Adrian Alonso
2010-03-05 23:15 ` [PATCH 6/7] tune-ppc440.inc: add base to extra archs Adrian Alonso
2010-03-05 23:15 ` [PATCH 7/7] xilinx-ml507.conf: new config file for ml507 devboard Adrian Alonso
2010-03-16 19:00 ` [PATCH 1/7] device_table_add-xsa: add dev nodes for system ace Stefan Schmidt
2010-03-17 22:00 ` Adrian Alonso
2010-03-17 23:00 ` Khem Raj
2010-03-18 16:42 ` Adrian Alonso
2010-03-18 19:05 ` Khem Raj
2010-03-18 22:09 ` Adrian Alonso
2010-03-18 22:11 ` Khem Raj
2010-03-19 14:09 ` Adrian Alonso
-- strict thread matches above, loose matches on Subject: below --
2010-03-05 15:55 Adrian Alonso
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox