* Re: meta-qt5 [not found] <CACgAsMeiKrLgjPnsZwOJtncRJ4nKExvjtS23VXNXcwyMsWtaDw@mail.gmail.com> @ 2014-02-03 17:37 ` Martin Jansa 2014-02-03 17:43 ` meta-qt5 Gary Thomas 0 siblings, 1 reply; 4+ messages in thread From: Martin Jansa @ 2014-02-03 17:37 UTC (permalink / raw) To: Kevyn-Alexandre Paré; +Cc: openembedded-devel [-- Attachment #1: Type: text/plain, Size: 1523 bytes --] On Mon, Feb 03, 2014 at 12:07:30PM -0500, Kevyn-Alexandre Paré wrote: > Morning Martin, morning, > I found your email from here: > http://layers.openembedded.org/layerindex/branch/master/layer/meta-qt5/ > > I'm searching for help on that package/doc > > If you prefer I can send my question to a specific mailing list if you > pin point me where? openembedded-devel@lists.openembedded.org is better place (see README file) > So my goal is to run qt5 on my OMAP3 board by using yocto. > > I have fallow : > http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard > and & > http://gpupowered.org/node/20 > > Try to run this: > root@overo:/# export QT_DEBUG_BACKINGSTORE=1 > root@overo:/# export QT_QPA_PLATFORM=minimal > root@overo:/# Qt5_CinematicExperience -plugin tslib > libpng warning: iCCP: known incorrect sRGB profile > libpng warning: iCCP: known incorrect sRGB profile > This plugin does not support createPlatformOpenGLContext! > QtQuick: failed to create OpenGL context > This plugin does not support createPlatformOpenGLContext! > QtQuick: failed to create OpenGL context > > Result: > nothing is visible on my LCD except the console... > > So do you have any idea where I should start digging to simply start > by making a qt5 example run on my board? I've no experience with wandaboard, but few people asked about it with relation to qt5, so maybe someone will respond on ML. -- Martin 'JaMa' Jansa jabber: Martin.Jansa@gmail.com [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 205 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: meta-qt5 2014-02-03 17:37 ` meta-qt5 Martin Jansa @ 2014-02-03 17:43 ` Gary Thomas 2014-02-07 13:47 ` meta-qt5 Otavio Salvador 0 siblings, 1 reply; 4+ messages in thread From: Gary Thomas @ 2014-02-03 17:43 UTC (permalink / raw) To: openembedded-devel On 2014-02-03 10:37, Martin Jansa wrote: > On Mon, Feb 03, 2014 at 12:07:30PM -0500, Kevyn-Alexandre Paré wrote: >> Morning Martin, > > morning, > >> I found your email from here: >> http://layers.openembedded.org/layerindex/branch/master/layer/meta-qt5/ >> >> I'm searching for help on that package/doc >> >> If you prefer I can send my question to a specific mailing list if you >> pin point me where? > > openembedded-devel@lists.openembedded.org is better place (see README > file) > >> So my goal is to run qt5 on my OMAP3 board by using yocto. >> >> I have fallow : >> http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard >> and & >> http://gpupowered.org/node/20 >> >> Try to run this: >> root@overo:/# export QT_DEBUG_BACKINGSTORE=1 >> root@overo:/# export QT_QPA_PLATFORM=minimal >> root@overo:/# Qt5_CinematicExperience -plugin tslib >> libpng warning: iCCP: known incorrect sRGB profile >> libpng warning: iCCP: known incorrect sRGB profile >> This plugin does not support createPlatformOpenGLContext! >> QtQuick: failed to create OpenGL context >> This plugin does not support createPlatformOpenGLContext! >> QtQuick: failed to create OpenGL context >> >> Result: >> nothing is visible on my LCD except the console... >> >> So do you have any idea where I should start digging to simply start >> by making a qt5 example run on my board? > > I've no experience with wandaboard, but few people asked about it with > relation to qt5, so maybe someone will respond on ML. > This works on my SabreLite which I built without X11 support. I did not use any of your QT_xxx exports, only this command line. # Qt5_CinematicExperience -platform eglfs -plugin tslib:/dev/input/touchscreen0 -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: meta-qt5 2014-02-03 17:43 ` meta-qt5 Gary Thomas @ 2014-02-07 13:47 ` Otavio Salvador 2014-02-10 21:22 ` meta-qt5 Denys Dmytriyenko 0 siblings, 1 reply; 4+ messages in thread From: Otavio Salvador @ 2014-02-07 13:47 UTC (permalink / raw) To: OpenEmbedded Devel List Hello, On Mon, Feb 3, 2014 at 3:43 PM, Gary Thomas <gary@mlbassoc.com> wrote: > On 2014-02-03 10:37, Martin Jansa wrote: >> >> On Mon, Feb 03, 2014 at 12:07:30PM -0500, Kevyn-Alexandre Paré wrote: >>> >>> Morning Martin, >> >> >> morning, >> >>> I found your email from here: >>> http://layers.openembedded.org/layerindex/branch/master/layer/meta-qt5/ >>> >>> I'm searching for help on that package/doc >>> >>> If you prefer I can send my question to a specific mailing list if you >>> pin point me where? >> >> >> openembedded-devel@lists.openembedded.org is better place (see README >> file) >> >>> So my goal is to run qt5 on my OMAP3 board by using yocto. >>> >>> I have fallow : >>> http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard >>> and & >>> http://gpupowered.org/node/20 >>> >>> Try to run this: >>> root@overo:/# export QT_DEBUG_BACKINGSTORE=1 >>> root@overo:/# export QT_QPA_PLATFORM=minimal >>> root@overo:/# Qt5_CinematicExperience -plugin tslib >>> libpng warning: iCCP: known incorrect sRGB profile >>> libpng warning: iCCP: known incorrect sRGB profile >>> This plugin does not support createPlatformOpenGLContext! >>> QtQuick: failed to create OpenGL context >>> This plugin does not support createPlatformOpenGLContext! >>> QtQuick: failed to create OpenGL context >>> >>> Result: >>> nothing is visible on my LCD except the console... >>> >>> So do you have any idea where I should start digging to simply start >>> by making a qt5 example run on my board? >> >> >> I've no experience with wandaboard, but few people asked about it with >> relation to qt5, so maybe someone will respond on ML. >> > > This works on my SabreLite which I built without X11 support. I did not > use any of your QT_xxx exports, only this command line. > > # Qt5_CinematicExperience -platform eglfs -plugin > tslib:/dev/input/touchscreen0 Same works for Wandboard. I have one customer using it. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: meta-qt5 2014-02-07 13:47 ` meta-qt5 Otavio Salvador @ 2014-02-10 21:22 ` Denys Dmytriyenko 0 siblings, 0 replies; 4+ messages in thread From: Denys Dmytriyenko @ 2014-02-10 21:22 UTC (permalink / raw) To: openembedded-devel On Fri, Feb 07, 2014 at 11:47:16AM -0200, Otavio Salvador wrote: > Hello, > > On Mon, Feb 3, 2014 at 3:43 PM, Gary Thomas <gary@mlbassoc.com> wrote: > > On 2014-02-03 10:37, Martin Jansa wrote: > >> > >> On Mon, Feb 03, 2014 at 12:07:30PM -0500, Kevyn-Alexandre Paré wrote: > >>> > >>> Morning Martin, > >> > >> > >> morning, > >> > >>> I found your email from here: > >>> http://layers.openembedded.org/layerindex/branch/master/layer/meta-qt5/ > >>> > >>> I'm searching for help on that package/doc > >>> > >>> If you prefer I can send my question to a specific mailing list if you > >>> pin point me where? > >> > >> > >> openembedded-devel@lists.openembedded.org is better place (see README > >> file) > >> > >>> So my goal is to run qt5 on my OMAP3 board by using yocto. > >>> > >>> I have fallow : > >>> http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard > >>> and & > >>> http://gpupowered.org/node/20 > >>> > >>> Try to run this: > >>> root@overo:/# export QT_DEBUG_BACKINGSTORE=1 > >>> root@overo:/# export QT_QPA_PLATFORM=minimal > >>> root@overo:/# Qt5_CinematicExperience -plugin tslib > >>> libpng warning: iCCP: known incorrect sRGB profile > >>> libpng warning: iCCP: known incorrect sRGB profile > >>> This plugin does not support createPlatformOpenGLContext! > >>> QtQuick: failed to create OpenGL context > >>> This plugin does not support createPlatformOpenGLContext! > >>> QtQuick: failed to create OpenGL context > >>> > >>> Result: > >>> nothing is visible on my LCD except the console... > >>> > >>> So do you have any idea where I should start digging to simply start > >>> by making a qt5 example run on my board? > >> > >> > >> I've no experience with wandaboard, but few people asked about it with > >> relation to qt5, so maybe someone will respond on ML. > >> > > > > This works on my SabreLite which I built without X11 support. I did not > > use any of your QT_xxx exports, only this command line. > > > > # Qt5_CinematicExperience -platform eglfs -plugin > > tslib:/dev/input/touchscreen0 > > Same works for Wandboard. I have one customer using it. Not sure what omap3 board specifically that is, but meta-qt5 was successfully tested on another TI platform with OpenGLES on SGX - AM335x. No X11 though. -- Denys ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-02-10 21:22 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CACgAsMeiKrLgjPnsZwOJtncRJ4nKExvjtS23VXNXcwyMsWtaDw@mail.gmail.com>
2014-02-03 17:37 ` meta-qt5 Martin Jansa
2014-02-03 17:43 ` meta-qt5 Gary Thomas
2014-02-07 13:47 ` meta-qt5 Otavio Salvador
2014-02-10 21:22 ` meta-qt5 Denys Dmytriyenko
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox