* Bitbaking for i.MX27
@ 2010-06-21 11:17 Dr. Ahmed Al-Alousi
2010-06-21 12:00 ` Eric Bénard
0 siblings, 1 reply; 4+ messages in thread
From: Dr. Ahmed Al-Alousi @ 2010-06-21 11:17 UTC (permalink / raw)
To: openembedded-devel
Guys,
I'm trying to get an image compiled for my Armadeus APF27 board, which is
i.MX27-based.
Can anyone give me any hints along the route ? Has anyone actually done this
?
Thanks in advance,
Ahmed.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Bitbaking for i.MX27
2010-06-21 11:17 Bitbaking for i.MX27 Dr. Ahmed Al-Alousi
@ 2010-06-21 12:00 ` Eric Bénard
2010-06-22 12:15 ` Dr. Ahmed Al-Alousi
0 siblings, 1 reply; 4+ messages in thread
From: Eric Bénard @ 2010-06-21 12:00 UTC (permalink / raw)
To: openembedded-devel
Hi,
Le 21/06/2010 13:17, Dr. Ahmed Al-Alousi a écrit :
> I'm trying to get an image compiled for my Armadeus APF27 board, which is
> i.MX27-based.
>
> Can anyone give me any hints along the route ? Has anyone actually done this
> ?
>
you can start from machine tx27 or mx27ads which are also i.MX27 based
and then create your own machine with these ones as an example.
Eric
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Bitbaking for i.MX27
2010-06-21 12:00 ` Eric Bénard
@ 2010-06-22 12:15 ` Dr. Ahmed Al-Alousi
2010-06-22 12:26 ` Eric Bénard
0 siblings, 1 reply; 4+ messages in thread
From: Dr. Ahmed Al-Alousi @ 2010-06-22 12:15 UTC (permalink / raw)
To: openembedded-devel
Hi Eric,
Thanks for your response.
Strangely enough, I could not find niether tx27 nor mx27ads under my
conf/machine directory.
I did the usual git pull to get the OE; should I be doing something else ?
Regards,
Ahmed.
On 21 June 2010 13:00, Eric Bénard <eric@eukrea.com> wrote:
> Hi,
>
> Le 21/06/2010 13:17, Dr. Ahmed Al-Alousi a écrit :
>
> I'm trying to get an image compiled for my Armadeus APF27 board, which is
>> i.MX27-based.
>>
>> Can anyone give me any hints along the route ? Has anyone actually done
>> this
>> ?
>>
>> you can start from machine tx27 or mx27ads which are also i.MX27 based
> and then create your own machine with these ones as an example.
>
> Eric
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-06-22 12:31 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-06-21 11:17 Bitbaking for i.MX27 Dr. Ahmed Al-Alousi
2010-06-21 12:00 ` Eric Bénard
2010-06-22 12:15 ` Dr. Ahmed Al-Alousi
2010-06-22 12:26 ` Eric Bénard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox