* Can't build on Fedora 13
@ 2010-07-24 19:01 Gary Thomas
2010-07-24 19:19 ` Gary Thomas
2010-07-24 20:50 ` Khem Raj
0 siblings, 2 replies; 4+ messages in thread
From: Gary Thomas @ 2010-07-24 19:01 UTC (permalink / raw)
To: openembedded-devel; +Cc: Discussion of the angstrom distribution development
Trying to build angstrom-gnome-image for beagleboard, fresh checkout
of org.openembedded.dev:
commit 244deb462973a2d7a9bfcc3399843202f9d29d51
Author: Stanislav Brabec <utx@penguin.cz>
Date: Sat Jul 24 14:21:03 2010 +0000
On Fedora 13, I get this error:
ERROR: Function do_configure failed
NOTE: Task failed: ('function do_configure failed', '/home/local/Angstrom_BeagleBoard/tmp/work/i686-linux/gawk-native-3.1.4-r3/temp/log.do_configure.10165')
ERROR: Logfile of failure stored in: /home/local/Angstrom_BeagleBoard/tmp/work/i686-linux/gawk-native-3.1.4-r3/temp/log.do_configure.10165
Log data follows:
| automake (GNU automake) 1.11.1
| Copyright (C) 2009 Free Software Foundation, Inc.
| License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Written by Tom Tromey <tromey@redhat.com>
| and Alexandre Duret-Lutz <adl@gnu.org>.
| AUTOV is 1.11
| NOTE: /home/local/Angstrom_BeagleBoard/tmp/sysroots/i686-linux/usr/share/gettext/config.rpath not found. gettext is not installed.
| NOTE: Executing autoreconf --verbose --install --force --exclude=autopoint -I /home/local/Angstrom_BeagleBoard/tmp/work/i686-linux/gawk-native-3.1.4-r3/gawk-3.1.4/m4/
-I/home/local/Angstrom_BeagleBoard/tmp/sysroots/i686-linux/usr/share/aclocal-1.11 -I /home/local/Angstrom_BeagleBoard/tmp/sysroots/i686-linux/usr/share/aclocal
| /usr/bin/autoreconf: unrecognized option `--exclude=autopoint'
| Try `/usr/bin/autoreconf --help' for more information.
| FATAL: autoreconf execution failed.
NOTE: package gawk-native-3.1.4-r3: task do_configure: Failed
The same tree builds on Fedora 12
Any ideas how to work past this?
Thanks
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Can't build on Fedora 13
2010-07-24 19:01 Can't build on Fedora 13 Gary Thomas
@ 2010-07-24 19:19 ` Gary Thomas
2010-07-24 20:50 ` Khem Raj
1 sibling, 0 replies; 4+ messages in thread
From: Gary Thomas @ 2010-07-24 19:19 UTC (permalink / raw)
To: openembedded-devel; +Cc: Discussion of the angstrom distribution development
On 07/24/2010 01:01 PM, Gary Thomas wrote:
> Trying to build angstrom-gnome-image for beagleboard, fresh checkout
> of org.openembedded.dev:
> commit 244deb462973a2d7a9bfcc3399843202f9d29d51
> Author: Stanislav Brabec <utx@penguin.cz>
> Date: Sat Jul 24 14:21:03 2010 +0000
>
> On Fedora 13, I get this error:
>
> ERROR: Function do_configure failed
> NOTE: Task failed: ('function do_configure failed',
> '/home/local/Angstrom_BeagleBoard/tmp/work/i686-linux/gawk-native-3.1.4-r3/temp/log.do_configure.10165')
>
> ERROR: Logfile of failure stored in:
> /home/local/Angstrom_BeagleBoard/tmp/work/i686-linux/gawk-native-3.1.4-r3/temp/log.do_configure.10165
>
> Log data follows:
> | automake (GNU automake) 1.11.1
> | Copyright (C) 2009 Free Software Foundation, Inc.
> | License GPLv2+: GNU GPL version 2 or later
> <http://gnu.org/licenses/gpl-2.0.html>
> | This is free software: you are free to change and redistribute it.
> | There is NO WARRANTY, to the extent permitted by law.
> |
> | Written by Tom Tromey <tromey@redhat.com>
> | and Alexandre Duret-Lutz <adl@gnu.org>.
> | AUTOV is 1.11
> | NOTE:
> /home/local/Angstrom_BeagleBoard/tmp/sysroots/i686-linux/usr/share/gettext/config.rpath
> not found. gettext is not installed.
> | NOTE: Executing autoreconf --verbose --install --force
> --exclude=autopoint -I
> /home/local/Angstrom_BeagleBoard/tmp/work/i686-linux/gawk-native-3.1.4-r3/gawk-3.1.4/m4/
> -I/home/local/Angstrom_BeagleBoard/tmp/sysroots/i686-linux/usr/share/aclocal-1.11
> -I
> /home/local/Angstrom_BeagleBoard/tmp/sysroots/i686-linux/usr/share/aclocal
> | /usr/bin/autoreconf: unrecognized option `--exclude=autopoint'
> | Try `/usr/bin/autoreconf --help' for more information.
> | FATAL: autoreconf execution failed.
> NOTE: package gawk-native-3.1.4-r3: task do_configure: Failed
>
> The same tree builds on Fedora 12
A little more info
Differences:
Fedora 12 - autoconf 2.63
Fedora 13 - autoconf 2.65
Neither manual page mentions a '--exclude=' option.
The file classes/autotools.bbclass is explicitly adding this option.
> Any ideas how to work past this?
>
> Thanks
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Can't build on Fedora 13
2010-07-24 19:01 Can't build on Fedora 13 Gary Thomas
2010-07-24 19:19 ` Gary Thomas
@ 2010-07-24 20:50 ` Khem Raj
2010-07-24 21:57 ` Gary Thomas
1 sibling, 1 reply; 4+ messages in thread
From: Khem Raj @ 2010-07-24 20:50 UTC (permalink / raw)
To: openembedded-devel; +Cc: Discussion of the angstrom distribution development
On Sat, Jul 24, 2010 at 12:01 PM, Gary Thomas <gary@mlbassoc.com> wrote:
> Trying to build angstrom-gnome-image for beagleboard, fresh checkout
> of org.openembedded.dev:
> commit 244deb462973a2d7a9bfcc3399843202f9d29d51
> Author: Stanislav Brabec <utx@penguin.cz>
> Date: Sat Jul 24 14:21:03 2010 +0000
>
> On Fedora 13, I get this error:
>
> ERROR: Function do_configure failed
> NOTE: Task failed: ('function do_configure failed',
> '/home/local/Angstrom_BeagleBoard/tmp/work/i686-linux/gawk-native-3.1.4-r3/temp/log.do_configure.10165')
> ERROR: Logfile of failure stored in:
> /home/local/Angstrom_BeagleBoard/tmp/work/i686-linux/gawk-native-3.1.4-r3/temp/log.do_configure.10165
> Log data follows:
> | automake (GNU automake) 1.11.1
> | Copyright (C) 2009 Free Software Foundation, Inc.
> | License GPLv2+: GNU GPL version 2 or later
> <http://gnu.org/licenses/gpl-2.0.html>
> | This is free software: you are free to change and redistribute it.
> | There is NO WARRANTY, to the extent permitted by law.
> |
> | Written by Tom Tromey <tromey@redhat.com>
> | and Alexandre Duret-Lutz <adl@gnu.org>.
> | AUTOV is 1.11
> | NOTE:
> /home/local/Angstrom_BeagleBoard/tmp/sysroots/i686-linux/usr/share/gettext/config.rpath
> not found. gettext is not installed.
> | NOTE: Executing autoreconf --verbose --install --force --exclude=autopoint
> -I
> /home/local/Angstrom_BeagleBoard/tmp/work/i686-linux/gawk-native-3.1.4-r3/gawk-3.1.4/m4/
> -I/home/local/Angstrom_BeagleBoard/tmp/sysroots/i686-linux/usr/share/aclocal-1.11
> -I
> /home/local/Angstrom_BeagleBoard/tmp/sysroots/i686-linux/usr/share/aclocal
> | /usr/bin/autoreconf: unrecognized option `--exclude=autopoint'
> | Try `/usr/bin/autoreconf --help' for more information.
Why dont you stage autoconf-native and automake-native
> | FATAL: autoreconf execution failed.
> NOTE: package gawk-native-3.1.4-r3: task do_configure: Failed
>
> The same tree builds on Fedora 12
>
> Any ideas how to work past this?
>
> Thanks
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Can't build on Fedora 13
2010-07-24 20:50 ` Khem Raj
@ 2010-07-24 21:57 ` Gary Thomas
0 siblings, 0 replies; 4+ messages in thread
From: Gary Thomas @ 2010-07-24 21:57 UTC (permalink / raw)
To: openembedded-devel; +Cc: Discussion of the angstrom distribution development
On 07/24/2010 02:50 PM, Khem Raj wrote:
> On Sat, Jul 24, 2010 at 12:01 PM, Gary Thomas<gary@mlbassoc.com> wrote:
>> Trying to build angstrom-gnome-image for beagleboard, fresh checkout
>> of org.openembedded.dev:
>> commit 244deb462973a2d7a9bfcc3399843202f9d29d51
>> Author: Stanislav Brabec<utx@penguin.cz>
>> Date: Sat Jul 24 14:21:03 2010 +0000
>>
>> On Fedora 13, I get this error:
>>
>> ERROR: Function do_configure failed
>> NOTE: Task failed: ('function do_configure failed',
>> '/home/local/Angstrom_BeagleBoard/tmp/work/i686-linux/gawk-native-3.1.4-r3/temp/log.do_configure.10165')
>> ERROR: Logfile of failure stored in:
>> /home/local/Angstrom_BeagleBoard/tmp/work/i686-linux/gawk-native-3.1.4-r3/temp/log.do_configure.10165
>> Log data follows:
>> | automake (GNU automake) 1.11.1
>> | Copyright (C) 2009 Free Software Foundation, Inc.
>> | License GPLv2+: GNU GPL version 2 or later
>> <http://gnu.org/licenses/gpl-2.0.html>
>> | This is free software: you are free to change and redistribute it.
>> | There is NO WARRANTY, to the extent permitted by law.
>> |
>> | Written by Tom Tromey<tromey@redhat.com>
>> | and Alexandre Duret-Lutz<adl@gnu.org>.
>> | AUTOV is 1.11
>> | NOTE:
>> /home/local/Angstrom_BeagleBoard/tmp/sysroots/i686-linux/usr/share/gettext/config.rpath
>> not found. gettext is not installed.
>> | NOTE: Executing autoreconf --verbose --install --force --exclude=autopoint
>> -I
>> /home/local/Angstrom_BeagleBoard/tmp/work/i686-linux/gawk-native-3.1.4-r3/gawk-3.1.4/m4/
>> -I/home/local/Angstrom_BeagleBoard/tmp/sysroots/i686-linux/usr/share/aclocal-1.11
>> -I
>> /home/local/Angstrom_BeagleBoard/tmp/sysroots/i686-linux/usr/share/aclocal
>> | /usr/bin/autoreconf: unrecognized option `--exclude=autopoint'
>> | Try `/usr/bin/autoreconf --help' for more information.
>
> Why dont you stage autoconf-native and automake-native
An interesting question (that I don't know the answer to - I'm just a simple
user...)
A more interesting question is that I can see that all of these tools have been
built - my work tree shows:
autoconf-native-2.65-r9.0
automake-native-1.11.1-r3.0
gettext-native-0.18-r1
so why aren't they being used? I instrumented the do_configure script to show
which version of autoreconf was used and indeed it is /usr/bin/autoreconf!
>> | FATAL: autoreconf execution failed.
>> NOTE: package gawk-native-3.1.4-r3: task do_configure: Failed
>>
>> The same tree builds on Fedora 12
>>
>> Any ideas how to work past this?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-07-24 21:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-07-24 19:01 Can't build on Fedora 13 Gary Thomas
2010-07-24 19:19 ` Gary Thomas
2010-07-24 20:50 ` Khem Raj
2010-07-24 21:57 ` Gary Thomas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox