OpenEmbedded stand at FOSDEM

OpenEmbedded stand at FOSDEM

[Robert Schuster]

[-- Attachment #1: Type: text/plain, Size: 336 bytes --]

Hi,
sorry for being late with this. Work and Christmas came into the way.

Our request for a stand at FOSDEM was successful! However as in the
years before we only get one table (I explicitly asked for a second one
and gave a reason for it but they ignored it).

Anyway. Who is going to man the booth?



Regards,
Robert


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 269 bytes --]

Re: OpenEmbedded stand at FOSDEM

[Marco Cavallini]

Robert Schuster ha scritto, Il 27/12/2009 13:17:
> Hi,
> sorry for being late with this. Work and Christmas came into the way.
> 
> Our request for a stand at FOSDEM was successful! However as in the
> years before we only get one table (I explicitly asked for a second one
> and gave a reason for it but they ignored it).
> 
> Anyway. Who is going to man the booth?
> 
> 
> 
> Regards,

Robert,
I am gojg to be at FOSDEM 2010 and I'm available to stay at booth for
some hours (not the whole day) if necessary.

Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
--
Marco Cavallini | KOAN sas | Bergamo - Italia
 embedded and real-time software engineering
   Atmel third party certified consultant
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
      http://www.KoanSoftware.com

Re: OpenEmbedded stand at FOSDEM

[Florian Boor]

Hi!

Robert Schuster schrieb:
> Our request for a stand at FOSDEM was successful! However as in the
> years before we only get one table (I explicitly asked for a second one
> and gave a reason for it but they ignored it).

well... if it is a "single" table in the same way it was last year this will be
fine ;-)

> Anyway. Who is going to man the booth?

I'm pretty sure I'll be there.

Greetings

Florian

-- 
The dream of yesterday                  Florian Boor
is the hope of today                    Tel: +49 271-771091-15
and the reality of tomorrow.            Fax: +49 271-771091-19
[Robert Hutchings Goddard, 1904]        florian.boor@kernelconcepts.de
                                        http://www.kernelconcepts.de/en

Re: OpenEmbedded stand at FOSDEM

[Frans Meulenbroeks]

2009/12/27 Robert Schuster <theBohemian@gmx.net>:
> Hi,
> sorry for being late with this. Work and Christmas came into the way.
>
> Our request for a stand at FOSDEM was successful! However as in the
> years before we only get one table (I explicitly asked for a second one
> and gave a reason for it but they ignored it).
>
> Anyway. Who is going to man the booth?
>
>
>
> Regards,
> Robert

I'm planning to visit, not exactly sure about my schedule though and
whether it leaves time to man the booth.

Frans.

Re: OpenEmbedded stand at FOSDEM

[Alessandro GARDICH]

Robert Schuster wrote:
> Hi,
> sorry for being late with this. Work and Christmas came into the way.
>
> Our request for a stand at FOSDEM was successful! However as in the
> years before we only get one table (I explicitly asked for a second one
> and gave a reason for it but they ignored it).
>
> Anyway. Who is going to man the booth?
>
>
>
> Regards,
> Robert
>
>   

I plan to attend FOSDEM 2010 and I'm available to spend some time at the 
booth.

-- 
 /-------------------------------------------------------------\
|           Alessandro Gardich : gremlin#gremlin!it             |
 >-------------------------------------------------------------<
|  I never saw a wild thing sorry for itself.                   |
|  A small bird will drop frozen dead from a bough              |
|  without ever having felt sorry for itself.                   |
 \-------------------------------------------------------------/

Re: OpenEmbedded stand at FOSDEM

[Stelios Koroneos]

On Sun, 2009-12-27 at 13:17 +0100, Robert Schuster wrote:
> Hi,
> sorry for being late with this. Work and Christmas came into the way.
> 
> Our request for a stand at FOSDEM was successful! However as in the
> years before we only get one table (I explicitly asked for a second one
> and gave a reason for it but they ignored it).
> 
> Anyway. Who is going to man the booth?

I am planning on attending this year, and could spend some time in the
booth.

Any plans for the "official" OE hotel this year ?


-- 
Stelios S. Koroneos

Digital OPSiS - Embedded Intelligence

Tel +30 210 9858296 Ext 100
Fax +30 210 9858298
http://www.digital-opsis.com

Re: OpenEmbedded stand at FOSDEM

[Alessandro GARDICH]

Stelios Koroneos wrote:
> On Sun, 2009-12-27 at 13:17 +0100, Robert Schuster wrote:
>   
>> Hi,
>> sorry for being late with this. Work and Christmas came into the way.
>>
>> Our request for a stand at FOSDEM was successful! However as in the
>> years before we only get one table (I explicitly asked for a second one
>> and gave a reason for it but they ignored it).
>>
>> Anyway. Who is going to man the booth?
>>     
>
> I am planning on attending this year, and could spend some time in the
> booth.
>
> Any plans for the "official" OE hotel this year ?
>
>
>   
yes good question ... I'm ready to book the fly this week ...

-- 
 /-------------------------------------------------------------\
|           Alessandro Gardich : gremlin@gremlin.it             |
 >-------------------------------------------------------------<
|  I never saw a wild thing sorry for itself.                   |
|  A small bird will drop frozen dead from a bough              |
|  without ever having felt sorry for itself.                   |
 \-------------------------------------------------------------/

Re: OpenEmbedded stand at FOSDEM

[Alessandro GARDICH]

Robert Schuster wrote:
> Hi,
> sorry for being late with this. Work and Christmas came into the way.
>
> Our request for a stand at FOSDEM was successful! However as in the
> years before we only get one table (I explicitly asked for a second one
> and gave a reason for it but they ignored it).
>
> Anyway. Who is going to man the booth?
>
>
>
> Regards,
> Robert
>
>   
we have plan something about what hardware to show on the boot ?

-- 
 /-------------------------------------------------------------\
|           Alessandro Gardich : gremlin@gremlin.it             |
 >-------------------------------------------------------------<
|  I never saw a wild thing sorry for itself.                   |
|  A small bird will drop frozen dead from a bough              |
|  without ever having felt sorry for itself.                   |
 \-------------------------------------------------------------/

Re: OpenEmbedded stand at FOSDEM

[Florian Boor]

Hi!

Alessandro GARDICH schrieb:

> we have plan something about what hardware to show on the boot ?

Very good point... I will come by car and bring some random devices with me. I
just have to look around in the office and search for something interesting.
I have flyer and the big poster as well.

Anyone with a good idea what to use to cover the tables?

Greetings

Florian

-- 
The dream of yesterday                  Florian Boor
is the hope of today                    Tel: +49 271-771091-15
and the reality of tomorrow.            Fax: +49 271-771091-19
[Robert Hutchings Goddard, 1904]        florian.boor@kernelconcepts.de
                                        http://www.kernelconcepts.de/en

Re: OpenEmbedded stand at FOSDEM

[Alessandro GARDICH]

Florian Boor wrote:
> Hi!
>
> Alessandro GARDICH schrieb:
>
>   
>> we have plan something about what hardware to show on the boot ?
>>     
>
> Very good point... I will come by car and bring some random devices with me. I
> just have to look around in the office and search for something interesting.
> I have flyer and the big poster as well.
>
> Anyone with a good idea what to use to cover the tables?
>
> Greetings
>
> Florian
>
>   
well device I have :
- SheevaPlug
- Atmel NGW100
- BeagleBoard from EVB (blue color)

at now only SheevaPlug isn't running OE build distro ...
I can't carry with me monitor.

-- 
 /-------------------------------------------------------------\
|           Alessandro Gardich : gremlin@gremlin.it             |
 >-------------------------------------------------------------<
|  I never saw a wild thing sorry for itself.                   |
|  A small bird will drop frozen dead from a bough              |
|  without ever having felt sorry for itself.                   |
 \-------------------------------------------------------------/

Re: OpenEmbedded stand at FOSDEM

[Graeme Gregory]

On Tue, Feb 02, 2010 at 10:42:53AM +0100, Florian Boor wrote:
> Hi!
> 
> Alessandro GARDICH schrieb:
> 
> > we have plan something about what hardware to show on the boot ?
> 
> Very good point... I will come by car and bring some random devices with me. I
> just have to look around in the office and search for something interesting.
> I have flyer and the big poster as well.
> 
> Anyone with a good idea what to use to cover the tables?
> 
Probably too late now, but what would be cool would be a white table cloth
with one end printed with OE logo. That end of course hangs over the front.

I guess a t-shirt printer shop might be able to turn one out.

Graeme

Re: OpenEmbedded stand at FOSDEM

[GNUtoo]

On Tue, 2010-02-02 at 10:50 +0100, Alessandro GARDICH wrote:
> Florian Boor wrote:
> > Hi!
> >
> > Alessandro GARDICH schrieb:
> >
> >   
> >> we have plan something about what hardware to show on the boot ?
> >>     
> >
> > Very good point... I will come by car and bring some random devices with me. I
> > just have to look around in the office and search for something interesting.
> > I have flyer and the big poster as well.
> >
> > Anyone with a good idea what to use to cover the tables?
> >
> > Greetings
> >
> > Florian
> >
> >   
> well device I have :
> - SheevaPlug
> - Atmel NGW100
> - BeagleBoard from EVB (blue color)
> 
> at now only SheevaPlug isn't running OE build distro ...
> I can't carry with me monitor.
I have:
*Bugbase 1.2
*Bugbase 1.3
With some bug-modules(2 display,1 audio card,1 gps,1 von-hippel,1
motion-detector)
Both can run angstrom and have usb host 2.0
the 1.2 has serial cable
the 1.3 has debug board,wifi,bluetooth
*wrt54gsv4(can boot micro,has a serial port connection soldered on
it)...not shure if I can bring it
*Openmoko freerunner with a broken and badly resoldered button,can run
SHR
*Htcdream,can run SHR
*eeepc 701 which runs angstrom

Denis.

Re: OpenEmbedded stand at FOSDEM

[Rolf Leggewie]

someone should bring lots of power extensions

Re: OpenEmbedded stand at FOSDEM

[Robert P. J. Day]

On Tue, 2 Feb 2010, Rolf Leggewie wrote:

> someone should bring lots of power extensions

  as someone who has helped out with a number of public functions, i
also recommend a sizable, portable UPS/battery off of which you can
run everything, just in case power goes out, you will keep running for
at least a while.  it's just a thought.

rday
--

========================================================================
Robert P. J. Day                               Waterloo, Ontario, CANADA

            Linux Consulting, Training and Kernel Pedantry.

Web page:                                          http://crashcourse.ca
Twitter:                                       http://twitter.com/rpjday
========================================================================

Re: OpenEmbedded stand at FOSDEM

[Ulf Samuelsson]

Alessandro GARDICH skrev:
> Robert Schuster wrote:
>> Hi,
>> sorry for being late with this. Work and Christmas came into the way.
>>
>> Our request for a stand at FOSDEM was successful! However as in the
>> years before we only get one table (I explicitly asked for a second one
>> and gave a reason for it but they ignored it).
>>
>> Anyway. Who is going to man the booth?
>>
>>
>>
>> Regards,
>> Robert
>>
>>   
> we have plan something about what hardware to show on the boot ?
> 


I am planning to bring an AT91SAM9G45 running OpenEmbedded.
The stuff I checked in recently needs to be updated.
Did not have time to look at this, since I have been
busy working on a Multitouch touchscreen driver.

Will repeat last years raffle for a AT91SAM9M10 kit - hot of the press!
in the Embedded Room so that should attract visitors to the booth.

See you there!


Best Regards
Ulf Samuelsson

Re: OpenEmbedded stand at FOSDEM

[Philip Balister]

On 02/02/2010 03:02 PM, Ulf Samuelsson wrote:
> Alessandro GARDICH skrev:
>> Robert Schuster wrote:
>>> Hi,
>>> sorry for being late with this. Work and Christmas came into the way.
>>>
>>> Our request for a stand at FOSDEM was successful! However as in the
>>> years before we only get one table (I explicitly asked for a second one
>>> and gave a reason for it but they ignored it).
>>>
>>> Anyway. Who is going to man the booth?
>>>
>>>
>>>
>>> Regards,
>>> Robert
>>>
>> we have plan something about what hardware to show on the boot ?
>>
>
>
> I am planning to bring an AT91SAM9G45 running OpenEmbedded.
> The stuff I checked in recently needs to be updated.
> Did not have time to look at this, since I have been
> busy working on a Multitouch touchscreen driver.

Ulf,

Can you make sure your commit messages look like:

http://wiki.openembedded.net/index.php/Commit_log_example

Also check your patches do not get word wrapped. If they get into 
patchwork in a form that can be applied with git-am, it is much much 
easier for us to commit them.

Philip


>
> Will repeat last years raffle for a AT91SAM9M10 kit - hot of the press!
> in the Embedded Room so that should attract visitors to the booth.
>
> See you there!
>
>
> Best Regards
> Ulf Samuelsson
>
>
>
>
>
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>

Re: OpenEmbedded stand at FOSDEM

[Ulf Samuelsson]

> 
> Ulf,
> 
> Can you make sure your commit messages look like:
> 
> http://wiki.openembedded.net/index.php/Commit_log_example
> 
> Also check your patches do not get word wrapped. If they get into
> patchwork in a form that can be applied with git-am, it is much much
> easier for us to commit them.
> 
> Philip
> 


Thanks, I realized they were not ideal when they popped up in the
changelist.
I will check this page before any more updates.


-- 
Best Regards
Ulf Samuelsson

Re: OpenEmbedded stand at FOSDEM

[Florian Boor]

Hi!

Ulf Samuelsson schrieb:
> Alessandro GARDICH skrev:
> I am planning to bring an AT91SAM9G45 running OpenEmbedded.
> The stuff I checked in recently needs to be updated.

Very good - do you think it would be a good idea to bring a AT91SAM9G10-EK as well?

> Will repeat last years raffle for a AT91SAM9M10 kit - hot of the press!
> in the Embedded Room so that should attract visitors to the booth.

That's a great idea!

Greetings

Florian

-- 
The dream of yesterday                  Florian Boor
is the hope of today                    Tel: +49 271-771091-15
and the reality of tomorrow.            Fax: +49 271-771091-19
[Robert Hutchings Goddard, 1904]        florian.boor@kernelconcepts.de
                                        http://www.kernelconcepts.de/en

Re: OpenEmbedded stand at FOSDEM

[Florian Boor]

Hi!

Alessandro GARDICH schrieb:
> well device I have :
> - SheevaPlug
> - Atmel NGW100
> - BeagleBoard from EVB (blue color)

Ok great! Then I will focus on different looking devices.

> at now only SheevaPlug isn't running OE build distro ...

Oh that's something we should be able to fix :-)

> I can't carry with me monitor.

Do we need one? I will have my laptop with me so that we can show OE in action.

Greetings

Florian

-- 
The dream of yesterday                  Florian Boor
is the hope of today                    Tel: +49 271-771091-15
and the reality of tomorrow.            Fax: +49 271-771091-19
[Robert Hutchings Goddard, 1904]        florian.boor@kernelconcepts.de
                                        http://www.kernelconcepts.de/en

Re: OpenEmbedded stand at FOSDEM

[Alessandro GARDICH]

Florian Boor wrote:
> Hi!
>
> Alessandro GARDICH schrieb:
>   
>> well device I have :
>> - SheevaPlug
>> - Atmel NGW100
>> - BeagleBoard from EVB (blue color)
>>     
>
> Ok great! Then I will focus on different looking devices.
>
>   
>> at now only SheevaPlug isn't running OE build distro ...
>>     
>
> Oh that's something we should be able to fix :-)
>
>   
>> I can't carry with me monitor.
>>     
>
> Do we need one? I will have my laptop with me so that we can show OE in action.
>
> Greetings
>
> Florian
>
>   
a monitor could be useful only to show beagle board in action ...

-- 
 /-------------------------------------------------------------\
|           Alessandro Gardich : gremlin@gremlin.it             |
 >-------------------------------------------------------------<
|  I never saw a wild thing sorry for itself.                   |
|  A small bird will drop frozen dead from a bough              |
|  without ever having felt sorry for itself.                   |
 \-------------------------------------------------------------/

Re: OpenEmbedded stand at FOSDEM

[Ulf Samuelsson]

Florian Boor skrev:
> Hi!
> 
> Ulf Samuelsson schrieb:
>> Alessandro GARDICH skrev:
>> I am planning to bring an AT91SAM9G45 running OpenEmbedded.
>> The stuff I checked in recently needs to be updated.
> 
> Very good - do you think it would be a good idea to bring a AT91SAM9G10-EK as well?
> 

The SAM9G10 is basically a SAM9261S with fixed LCD to do
RGB instead of BGRI. I never bothered to get one anyway.

The SAM9G45 is a completely different beast
with DDR2, High Speed USB, dual busses (unlike SAM9263,
it has real high throughput on both), and in its
SAM9M10 variety it has H/W support for Video Decoding
H.263/4, MPEG-2,MPEG-4, JPEG etc.

BR
Ulf


>> Will repeat last years raffle for a AT91SAM9M10 kit - hot of the press!
>> in the Embedded Room so that should attract visitors to the booth.
> 
> That's a great idea!
> 
> Greetings
> 
> Florian
> 

Re: OpenEmbedded stand at FOSDEM

[Florian Boor]

Hi,

Ulf Samuelsson schrieb:

> The SAM9G10 is basically a SAM9261S with fixed LCD to do
> RGB instead of BGRI. I never bothered to get one anyway.
> 
> The SAM9G45 is a completely different beast
> with DDR2, High Speed USB, dual busses (unlike SAM9263,
> it has real high throughput on both), and in its
> SAM9M10 variety it has H/W support for Video Decoding
> H.263/4, MPEG-2,MPEG-4, JPEG etc.

hmm... pretty cool, that's something I would like to test some time :-)

Greetings

Florian


-- 
The dream of yesterday                  Florian Boor
is the hope of today                    Tel: +49 271-771091-15
and the reality of tomorrow.            Fax: +49 271-771091-19
[Robert Hutchings Goddard, 1904]        florian.boor@kernelconcepts.de
                                        http://www.kernelconcepts.de/en

OpenEmbedded Stand at FOSDEM

[Philip Balister]

Greetings from FOSDEM. The network is working really well this year!

http://www.flickr.com/photos/32615155@N00/6822271361/in/photostream

A big thanks to Robert and Florian for organizing the booth, and every
who has helped staff the table.

Philip

please add news entry: Re: OpenEmbedded Stand at FOSDEM

[Robert Schuster]

[-- Attachment #1: Type: text/plain, Size: 1542 bytes --]

Hi,
I just noticed that we forgot to mention our FOSDEM attendance in the
news section of the Wiki. Could somebody add the following text, so that
at least afterwards people can find out that we'd have been there:

--

OpenEmbedded attended europe's largest free software conference
FOSDEM'12 in Brussels. Thanks for all the helpers and guests at our
booth[0]. See you soon at a F/OSS event near you!

[0] - http://www.flickr.com/photos/32615155@N00/6822271361/in/photostream

--

Cheers,
Robert

Am 07.02.2012 08:37, schrieb Robert Schuster:
> Hi,
> it was indeed a great experience this year. I thank everyone who
> attended, helped, added devices etc. :)
> 
> Looking forward to our LinuxTag attendance ...
> 
> Regards,
> Robert
> 
> Am 05.02.2012 12:42, schrieb Philip Balister:
>> Greetings from FOSDEM. The network is working really well this year!
>>
>> http://www.flickr.com/photos/32615155@N00/6822271361/in/photostream
>>
>> A big thanks to Robert and Florian for organizing the booth, and every
>> who has helped staff the table.
>>
>> Philip
>>
>> _______________________________________________
>> Openembedded-members mailing list
>> Openembedded-members@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-members
> 
> 
> 
> 
> _______________________________________________
> Openembedded-members mailing list
> Openembedded-members@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-members



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 270 bytes --]

Re: please add news entry: Re: OpenEmbedded Stand at FOSDEM

[Paul Eggleton]

On Tuesday 07 February 2012 09:51:33 Robert Schuster wrote:
> Hi,
> I just noticed that we forgot to mention our FOSDEM attendance in the
> news section of the Wiki. Could somebody add the following text, so that
> at least afterwards people can find out that we'd have been there:
> 
> --
> 
> OpenEmbedded attended europe's largest free software conference
> FOSDEM'12 in Brussels. Thanks for all the helpers and guests at our
> booth[0]. See you soon at a F/OSS event near you!
> 
> [0] - http://www.flickr.com/photos/32615155@N00/6822271361/in/photostream

I tried but despite having edit privileges to other pages I am not permitted 
to edit the front page :(

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre

Re: please add news entry: Re: OpenEmbedded Stand at FOSDEM

[Paul Eggleton]

On Tuesday 07 February 2012 11:14:07 Marco Cavallini [KOAN] wrote:
> Robert Schuster ha scritto, Il 07/02/2012 09:51:
> > Hi,
> > I just noticed that we forgot to mention our FOSDEM attendance in the
> > news section of the Wiki. Could somebody add the following text, so that
> 
> > at least afterwards people can find out that we'd have been there:
> Moreover the news titled "# 2011-03-02: Yocto Project Aligns Technology
> with OpenEmbedded and Gains Corporate Collaborators " has a broken link.

Phil sorted out my access, so I have fixed the above and added Robert's news 
entry.

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre

OpenEmbedded Stand at FOSDEM

[Philip Balister]

Every year since 2007, OpenEmbedded has a stand at FOSDEM
(http://www.fosdem.org)

From the first year:

https://www.flickr.com/photos/32615155@N00/405229708/in/album-72157594561002629/

Belen and I are sort of organizing this, but both of us are also
involved in devrooms, so we will need a lot of help manning the stand
and getting some demos together.

Demos should try and show how the project makes embedded work easier, by
showing tools and/or cool examples of devices using Linux built with
OpenEmbedded. In previous years, we've shown toaster with data collected
from demos on the table. Collections of devices running images built
from the same recipe and interesting products using Linux by OpenEmbedded.

I'm happy to try and organize demos and staffing, but I could really use
some help this year, so if you are in a position to tak ethe lead on
operating the stand, that would be a huge help to me and the rest of the
project.

Thanks,

Philip