[PATCHv3 4/5] am3517-crane: Add am3517-crane machine type

[PATCHv3 4/5] am3517-crane: Add am3517-crane machine type

[Anil Kumar]

	
	* Patch Version updated for latest git tree.

        * Add new machine type for the am3517-crane board.

        * CraneBoard is a hardware development platform based
          on the Sitara AM3517 ARM Cortex - A8 microprocessor
          device. This is a low cost reference design.

        * You can find more about CraneBoard here:
               [1] http://www.ti.com/arm
               [2] http://www.mistralsolutions.com/products/craneboard.php

Signed-off-by: Anil Kumar <anilm@mistralsolutions.com>
---
 conf/machine/am3517-crane.conf |   52 ++++++++++++++++++++++++++++++++++++++++
 1 files changed, 52 insertions(+), 0 deletions(-)
 create mode 100644 conf/machine/am3517-crane.conf

diff --git a/conf/machine/am3517-crane.conf b/conf/machine/am3517-crane.conf
new file mode 100644
index 0000000..dad4625
--- /dev/null
+++ b/conf/machine/am3517-crane.conf
@@ -0,0 +1,52 @@
+#@TYPE: Machine
+#@NAME: craneboard machine
+#@DESCRIPTION: Machine configuration for the AM3517 Crane board
+TARGET_ARCH = "arm"
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-omapfb \
+           xf86-input-keyboard"
+
+# Only has DVI connector for external screen
+GUI_MACHINE_CLASS = "bigscreen"
+
+require conf/machine/include/omap3.inc
+
+# Ship all kernel modules
+
+IMAGE_FSTYPES ?= "jffs2 tar.bz2"
+EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
+EXTRA_IMAGEDEPENDS += " u-boot x-load"
+
+SERIAL_CONSOLE = "115200 ttyS2"
+USE_VT = "2"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
+
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "am3517_crane_config"
+XLOAD_MACHINE = "am3517crane_config"
+
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen ethernet"
+
+# NOTE: there are NAND and OneNAND versions of this board...
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    129024 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1996 LEBs
+MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
+
-- 
1.7.0.4

Re: [PATCHv3 4/5] am3517-crane: Add am3517-crane machine type

[Stefan Schmidt]

Hello.

On Tue, 2010-11-30 at 11:41, Anil Kumar wrote:
> diff --git a/conf/machine/am3517-crane.conf b/conf/machine/am3517-crane.conf
> new file mode 100644
> index 0000000..dad4625
> --- /dev/null
> +++ b/conf/machine/am3517-crane.conf
> @@ -0,0 +1,52 @@
> +#@TYPE: Machine
> +#@NAME: craneboard machine
> +#@DESCRIPTION: Machine configuration for the AM3517 Crane board
> +TARGET_ARCH = "arm"
> +PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
> +XSERVER = "xserver-xorg \
> +           xf86-input-evdev \
> +           xf86-input-mouse \
> +           xf86-video-omapfb \
> +           xf86-input-keyboard"
> +
> +# Only has DVI connector for external screen
> +GUI_MACHINE_CLASS = "bigscreen"
> +
> +require conf/machine/include/omap3.inc
> +
> +# Ship all kernel modules

Stray comment. Seems you forgot to remove it.

> +IMAGE_FSTYPES ?= "jffs2 tar.bz2"
> +EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
> +EXTRA_IMAGEDEPENDS += " u-boot x-load"

These depends are already added from omap3.inc

regards
Stefan Schmidt