From: Jack Mitchell <ml@communistcode.co.uk>
To: openembedded-devel@lists.openembedded.org
Subject: Re: [PATCH 1/2] php: add sqlite3 and mysql PACKAGECONFIG options
Date: Tue, 23 Apr 2013 10:07:57 +0100 [thread overview]
Message-ID: <51764F6D.7040306@communistcode.co.uk> (raw)
In-Reply-To: <20130422165350.GA3217@jama>
On 22/04/13 17:53, Martin Jansa wrote:
> On Fri, Apr 19, 2013 at 11:07:11AM +0100, Jack Mitchell wrote:
>> From: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
>>
>> Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
>> ---
>> meta-oe/recipes-devtools/php/php.inc | 29 ++++++++++++++++++++---------
>> 1 file changed, 20 insertions(+), 9 deletions(-)
>>
>> diff --git a/meta-oe/recipes-devtools/php/php.inc b/meta-oe/recipes-devtools/php/php.inc
>> index 225c3d7..892a0b5 100644
>> --- a/meta-oe/recipes-devtools/php/php.inc
>> +++ b/meta-oe/recipes-devtools/php/php.inc
>> @@ -3,11 +3,11 @@ HOMEPAGE = "http://www.php.net"
>> SECTION = "console/network"
>> LICENSE = "PHP-3.0"
>> BBCLASSEXTEND = "native"
>> -DEPENDS = "zlib libxml2 virtual/libiconv php-native lemon-native mysql5 \
>> - libc-client openssl sqlite3"
>> +DEPENDS = "zlib libxml2 virtual/libiconv php-native lemon-native \
>> + libc-client openssl"
>> DEPENDS_virtclass-native = "zlib-native libxml2-native"
>>
>> -INC_PR = "r4"
>> +INC_PR = "r5"
>>
>> SRC_URI = "http://www.php.net/distributions/php-${PV}.tar.bz2"
>>
>> @@ -27,12 +27,7 @@ EXTRA_OECONF = "--enable-mbstring --enable-discard-path --enable-wddx \
>> --with-zlib --with-zlib-dir=${STAGING_LIBDIR}/.. \
>> --with-iconv=${STAGING_LIBDIR}/.. \
>> --with-libxml-dir=${STAGING_BINDIR_CROSS} \
>> - --disable-embedded-mysqli \
>> - --with-mysql="${STAGING_DIR_TARGET}${prefix}" \
>> - --with-mysqli="${STAGING_BINDIR_CROSS}/mysql_config" \
>> - --with-sqlite3=${STAGING_LIBDIR}/.. --enable-sqlite-utf8 \
>> - --with-pdo-mysql="${STAGING_BINDIR_CROSS}/mysql_config" \
>> - --with-pdo-sqlite=${STAGING_LIBDIR}/.. ${COMMON_EXTRA_OECONF} \
>> + ${COMMON_EXTRA_OECONF} \
>> "
>> EXTRA_OECONF_virtclass-native = "--with-cgi --without-libpng --without-libjpeg \
>> --with-zlib --with-zlib-dir=${STAGING_LIBDIR_NATIVE}/.. \
>> @@ -40,6 +35,22 @@ EXTRA_OECONF_virtclass-native = "--with-cgi --without-libpng --without-libjpeg \
>> ${COMMON_EXTRA_OECONF} \
>> "
>>
>> +PACKAGECONFIG ??= "mysql sqlite3"
>> +PACKAGECONFIG_class-native = ""
>> +
>> +PACKAGECONFIG[mysql] = "--with-mysql=\"${STAGING_DIR_TARGET}${prefix}\" \
>> + --with-mysqli=\"${STAGING_BINDIR_CROSS}/mysql_config\" \
>> + --with-pdo-mysql=\"${STAGING_BINDIR_CROSS}/mysql_config\" \
>> + --disable-embedded-mysqli \
>> + , \
>> + ,mysql5"
>> +
>> +PACKAGECONFIG[sqlite3] = "--with-sqlite3=${STAGING_LIBDIR}/.. \
>> + --enable-sqlite-utf8 \
>> + --with-pdo-sqlite=${STAGING_LIBDIR}/.. \
>> + , \
>> + ,sqlite3"
>> +
>> LIBS_virtclass-native = " -lxml2 "
>> LIBS_pn-php =" -lpthread "
>> export LIBS
>> --
>> 1.8.2.1
> Now target php is failing with:
> | configure:61165: result: no
> | configure:61215: error: Cannot find MySQL header files under
> "/home/jenkins/oe/shr-core-branches/shr-core/tmp-eglibc/sysroots/qemuarm/usr".
> | Note that the MySQL client library is not bundled anymore!
>
> full log here:
> qemuarm
> http://logs.nslu2-linux.org/buildlogs/oe/oe-shr-core-branches/log.world.20130422_080202.log/bitbake.world.log
>
> qemux86
> http://logs.nslu2-linux.org/buildlogs/oe/oe-shr-core-branches/log.world.20130422_125516.log/bitbake.world.log
>
I don't know what is going on here as I can't trigger it my end,
possibly a race condition? I wouldn't think so though, as mysql5 is a
direct depends of php.
[09:42:58 jack ccoR0005]$ bitbake -c cleansstate mysql5 php
Loading cache: 100%
|#################################################################################|
ETA: 00:00:00
Loaded 64 entries from dependency cache.
Parsing recipes: 100%
|###############################################################################|
Time: 00:00:15
Parsing of 852 .bb files complete (46 cached, 806 parsed). 1162 targets,
110 skipped, 0 masked, 0 errors.
WARNING: No bb files matched BBFILE_PATTERN_dblinux
'^/mnt/SSD/oe-r0005/meta-dblinux/'
Build Configuration:
BB_VERSION = "1.19.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Unknown"
TARGET_SYS = "arm-oecore-linux-gnueabi"
MACHINE = "beaglebone"
DISTRO = "dblinux"
DISTRO_VERSION = "1.0-20130423"
TUNE_FEATURES = "armv7a vfp neon"
TARGET_FPU = "vfp-neon"
meta = "master:548fdb44bed180f05255f0ec25d18e673dce19a7"
meta-webserver = "master:c56a702d21510157c753c48bcac8e21bbcd90a2b"
meta-db = "master:4b608673b2928f851d379b7b1bb2d3f18c46dbac"
meta-dblinux = "master:0abe0ab71c58cddcee35d1068f3606dacc9a1d09"
common-bsp = "master:6d12438278bbf575c43c19262d48458a90cfe2af"
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing RunQueue Tasks
NOTE: Tasks Summary: Attempted 4 tasks of which 0 didn't need to be
rerun and all succeeded.
Summary: There was 1 WARNING message shown.
[09:43:42 jack ccoR0005]$ bitbake php
Loading cache: 100%
|#################################################################################|
ETA: 00:00:00
Loaded 1158 entries from dependency cache.
Parsing recipes: 100%
|###############################################################################|
Time: 00:00:01
Parsing of 852 .bb files complete (847 cached, 5 parsed). 1162 targets,
110 skipped, 0 masked, 0 errors.
WARNING: No bb files matched BBFILE_PATTERN_dblinux
'^/mnt/SSD/oe-r0005/meta-dblinux/'
Build Configuration:
BB_VERSION = "1.19.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Unknown"
TARGET_SYS = "arm-oecore-linux-gnueabi"
MACHINE = "beaglebone"
DISTRO = "dblinux"
DISTRO_VERSION = "1.0-20130423"
TUNE_FEATURES = "armv7a vfp neon"
TARGET_FPU = "vfp-neon"
meta = "master:548fdb44bed180f05255f0ec25d18e673dce19a7"
meta-webserver = "master:c56a702d21510157c753c48bcac8e21bbcd90a2b"
meta-db = "master:4b608673b2928f851d379b7b1bb2d3f18c46dbac"
meta-dblinux = "master:0abe0ab71c58cddcee35d1068f3606dacc9a1d09"
common-bsp = "master:6d12438278bbf575c43c19262d48458a90cfe2af"
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Tasks Summary: Attempted 1322 tasks of which 738 didn't need to be
rerun and all succeeded.
Summary: There was 1 WARNING message shown.
[10:06:39 jack ccoR0005]$
--
Jack Mitchell (jack@embed.me.uk)
Embedded Systems Engineer
http://www.embed.me.uk
--
next prev parent reply other threads:[~2013-04-23 9:25 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-19 10:07 [PATCH 0/2 v4] php: add PACKAGECONFIG options Jack Mitchell
2013-04-19 10:07 ` [PATCH 1/2] php: add sqlite3 and mysql " Jack Mitchell
2013-04-22 16:53 ` Martin Jansa
2013-04-23 9:07 ` Jack Mitchell [this message]
2013-04-23 9:18 ` [meta-oe][PATCH v5] " Jack Mitchell
2013-04-23 9:20 ` Jack Mitchell
2013-04-19 10:07 ` [PATCH 2/2] php: remove non-existant configure flags and improve current ones Jack Mitchell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51764F6D.7040306@communistcode.co.uk \
--to=ml@communistcode.co.uk \
--cc=openembedded-devel@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox