From: Gary Thomas <gary@mlbassoc.com>
To: Martin Jansa <martin.jansa@gmail.com>
Cc: openembedded-devel <openembedded-devel@lists.openembedded.org>
Subject: Re: [meta-oe][PATCH v3] mplayer2: Remove blacklist
Date: Fri, 20 Feb 2015 07:39:13 -0700 [thread overview]
Message-ID: <54E74711.30202@mlbassoc.com> (raw)
In-Reply-To: <20150220143400.GH2322@jama>
On 2015-02-20 07:34, Martin Jansa wrote:
> On Fri, Feb 20, 2015 at 07:02:22AM -0700, Gary Thomas wrote:
>> On 2015-02-20 06:43, Martin Jansa wrote:
>>> On Thu, Feb 12, 2015 at 07:01:17PM -0700, Gary Thomas wrote:
>>>> On 2015-02-12 18:08, Martin Jansa wrote:
>>>>> Does it have --enable-* options for the new PACKAGECONFIGs? If yes then it should specify them as well (advantage at least in some projects is that when it explicitly asking for
>>>>> foo and foo is unusable it will end with fatal error instead of ignoring broken foo dependency.
>>>>
>>>> No, those are auto-discover and only have disable options.
>>>
>>> Please add REQUIRED_DISTRO_FEATURES = "x11"
>>> because it depends on couple of recipes which aren't available without
>>> x11: xsp, libxv, virtual/libx11, libxscrnsaver
>>>
>>> and it should set LICENSE_FLAGS like libpostproc has to resolve:
>>> ERROR: Nothing PROVIDES 'libpostproc' (but meta-oe/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb DEPENDS on or otherwise requires it)
>>> ERROR: libpostproc was skipped: because it has a restricted license not whitelisted in LICENSE_FLAGS_WHITELIST
>>
>> Is there a way to make these conditional? For example, you could build
>> without libpostproc and the result would not need the commercial license.
>> There may also be a way to build without X11, but I've not investigated
>> that yet.
>
> You have added postproc to default PACKAGECONFIG, I haven't tried if it
> works without it. The same for x11 related dependencies.
The question was is there a way to not set the license as commercial
if libpostproc is disabled?
>
>>>>> On Fri, Feb 13, 2015 at 1:54 AM, Gary Thomas <gary@mlbassoc.com <mailto:gary@mlbassoc.com>> wrote:
>>>>>
>>>>> mplayer2 no longer needs to be blacklisted as OE-core has moved
>>>>> to libav_9.16.
>>>>>
>>>>> [v2-v3] Also update build dependencies to quash QA warnings, using
>>>>> PACKAGECONFIG for most optional features.
>>>>>
>>>>> Signed-off-by: Gary Thomas <gary@mlbassoc.com <mailto:gary@mlbassoc.com>>
>>>>> ---
>>>>> meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb <http://mplayer2_git.bb> | 9 ++++++---
>>>>> 1 file changed, 6 insertions(+), 3 deletions(-)
>>>>>
>>>>> diff --git a/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb <http://mplayer2_git.bb> b/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb <http://mplayer2_git.bb>
>>>>> index 7c04ff1..2de26b0 100644
>>>>> --- a/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb <http://mplayer2_git.bb>
>>>>> +++ b/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb <http://mplayer2_git.bb>
>>>>> @@ -3,7 +3,7 @@ SECTION = "multimedia"
>>>>> HOMEPAGE = "http://www.mplayerhq.hu/"
>>>>> DEPENDS = "libvpx libdvdread libtheora virtual/libsdl ffmpeg xsp zlib \
>>>>> libpng jpeg liba52 freetype fontconfig alsa-lib lzo ncurses \
>>>>> - libxv virtual/libx11 libass speex faad2"
>>>>> + libxv virtual/libx11 libass speex faad2 libxscrnsaver"
>>>>>
>>>>> RDEPENDS_${PN} = "mplayer-common"
>>>>> PROVIDES = "mplayer"
>>>>> @@ -13,8 +13,6 @@ RCONFLICTS_${PN} = "mplayer"
>>>>> LICENSE = "GPLv3"
>>>>> LIC_FILES_CHKSUM = "file://LICENSE;md5=d32239bcb673463ab874e80d47fae504"
>>>>>
>>>>> -PNBLACKLIST[mplayer2] ?= "Requires newer libav which has negative D_P"
>>>>> -
>>>>> SRC_URI = "git://repo.or.cz/mplayer.git <http://repo.or.cz/mplayer.git> \
>>>>> file://0001-configure-don-t-disable-ASS-support-when-explicitly-.patch \
>>>>> "
>>>>> @@ -109,9 +107,14 @@ EXTRA_OECONF = " \
>>>>> EXTRA_OECONF_append_armv6 = " --enable-armv6"
>>>>> EXTRA_OECONF_append_armv7a = " --enable-armv6 --enable-neon"
>>>>>
>>>>> +PACKAGECONFIG ??= "vorbis postproc"
>>>>> PACKAGECONFIG[mad] = "--enable-mad,--disable-mad,libmad"
>>>>> PACKAGECONFIG[a52] = "--enable-liba52,--disable-liba52,liba52"
>>>>> PACKAGECONFIG[lame] = ",,lame"
>>>>> +PACKAGECONFIG[postproc] = ",--disable-libpostproc,libpostproc"
>>>>> +PACKAGECONFIG[vorbis] = ",--disable-libvorbis,libvorbis"
>>>>> +PACKAGECONFIG[portaudio] = ",--disable-portaudio,portaudio-v19"
>>>>> +PACKAGECONFIG[mpg123] = ",--disable-mpg123,mpg123"
>>>>>
>>>>> FULL_OPTIMIZATION = "-fexpensive-optimizations -fomit-frame-pointer -frename-registers -O4 -ffast-math"
>>>>> BUILD_OPTIMIZATION = "${FULL_OPTIMIZATION}"
>>>>> --
>>>>> 1.9.1
>>>>>
>>>>> --
>>>>> _______________________________________________
>>>>> Openembedded-devel mailing list
>>>>> Openembedded-devel@lists.openembedded.org <mailto:Openembedded-devel@lists.openembedded.org>
>>>>> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>>>>>
>>>>>
>>>>
>>>> --
>>>> ------------------------------------------------------------
>>>> Gary Thomas | Consulting for the
>>>> MLB Associates | Embedded world
>>>> ------------------------------------------------------------
>>>
>>
>> --
>> ------------------------------------------------------------
>> Gary Thomas | Consulting for the
>> MLB Associates | Embedded world
>> ------------------------------------------------------------
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
next prev parent reply other threads:[~2015-02-20 14:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-13 0:54 [meta-oe][PATCH v3] mplayer2: Remove blacklist Gary Thomas
2015-02-13 1:08 ` Martin Jansa
2015-02-13 2:01 ` Gary Thomas
2015-02-20 13:43 ` Martin Jansa
2015-02-20 14:02 ` Gary Thomas
2015-02-20 14:34 ` Martin Jansa
2015-02-20 14:39 ` Gary Thomas [this message]
2015-03-05 14:30 ` [meta-oe][PATCH] mplayer2: set REQUIRED_DISTRO_FEATURES and LICENSE_FLAGS Martin Jansa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54E74711.30202@mlbassoc.com \
--to=gary@mlbassoc.com \
--cc=martin.jansa@gmail.com \
--cc=openembedded-devel@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox