* Problems building a kernelmodule for OE
@ 2008-10-27 8:13 Henk Geraads
2008-10-27 15:56 ` Stanislav Brabec
0 siblings, 1 reply; 6+ messages in thread
From: Henk Geraads @ 2008-10-27 8:13 UTC (permalink / raw)
To: openembedded-devel
Hi,
I am not sure if i posted it in the correct mailing list!
But I am trying to make a kernel module for the OE distro angstrom 2007-12 for machine CM-X270.
when I try to make the module, following error message is produced!
In file included from include/linux/jiffies.h:4,
from include/linux/sched.h:54,
from include/asm/uaccess.h:14,
from /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:10:
include/linux/calc64.h: In function 'do_div_llr':
include/linux/calc64.h:25: error: '__LINUX_ARM_ARCH__' undeclared (first use in this function)
include/linux/calc64.h:25: error: (Each undeclared identifier is reported only once
include/linux/calc64.h:25: error: for each function it appears in.)
/home/henk/cm270/fifodrv../cfi-ktst/cfi-mod.c: In function 'cfi_ioctl':
/home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:67: warning: implicit declaration of function 'GPLR'
/home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:67: warning: implicit declaration of function 'GPIO_bit'
/home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c: In function 'cfi_init':
/home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:204: error: 'GPIO_IN' undeclared (first use in this function)
/home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:208: error: 'MSC1' undeclared (first use in this function)
/home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:209: error: 'GPIO79_nCS_3_MD' undeclared (first use in this function)
make[2]: *** [/home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.o] Error 1
make[1]: *** [_module_/home/henk/cm270/fifodrv/cfi-ktst] Error 2
make: *** [default] Error 2
My source for the module cfi-kernel is located in the
path: /home/henk/cm270/fifodrv
I create with "bitbake linux -c defshell -f" an enviroment with the
"correct" path's and env.var's.
Makefile:
# Makefile for external CFI kernel module
CFLAGS = -march=armv5t -Wall -D_GNU_SOURCE
ifneq ($(KERNELRELEASE),)
# we are inside the kernel tree and called from kernel build system
obj-m := cfi-mod.o
else
# we are a separate module and start the kernel make and give it our directory
KERNELDIR = /home/henk/oe/build/tmp/angstrom/work/cm-x270-angstrom-linux-gnueabi/linux-2.6.23-r8/linux-2.6.23
#KERNELDIR = ../linux-26
PWD := $(shell pwd)
default:
$(MAKE) -C $(KERNELDIR) M=$(PWD) modules
endif
clean::
$(RM) -rf *.o .depend .*.cmd *.ko *.mod.c .tmp_versions *~
.PHONY: clean
depend .depend dep:
$(CC) $(CFLAGS) -M *.c > .depend
ifeq (.depend,$(wildcard .depend))
include .depend
endif
start op the module sourcecode:
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/fs.h>
#include <asm/uaccess.h>
#include <asm/io.h>
MODULE_AUTHOR("Henk");
......
What is my mistake??
Thanks in advance for any reaction!
Henk
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problems building a kernelmodule for OE
2008-10-27 8:13 Problems building a kernelmodule for OE Henk Geraads
@ 2008-10-27 15:56 ` Stanislav Brabec
2008-10-28 9:15 ` Henk Geraads
0 siblings, 1 reply; 6+ messages in thread
From: Stanislav Brabec @ 2008-10-27 15:56 UTC (permalink / raw)
To: openembedded-devel
Henk Geraads wrote:
> when I try to make the module, following error message is produced!
It seems, that source code is a bit outdated (intended for older kernel
that you have) or you are compiling it in a bad way.
> include/linux/calc64.h:25: error: '__LINUX_ARM_ARCH__' undeclared (first use in this function)
Strange. It should be defined.
> /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:67: warning: implicit declaration of function 'GPLR'
> /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:67: warning: implicit declaration of function 'GPIO_bit'
> /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c: In function 'cfi_init':
> /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:204: error: 'GPIO_IN' undeclared (first use in this function)
> /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:208: error: 'MSC1' undeclared (first use in this function)
> /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:209: error: 'GPIO79_nCS_3_MD' undeclared (first use in this function)
It indicates that you need to include asm/arch/pxa2xx-regs.h and
asm/arch/pxa2xx-gpio.h.
--
Best Regards / S pozdravem,
Stanislav Brabec
software developer
---------------------------------------------------------------------
SUSE LINUX, s. r. o. e-mail: sbrabec@suse.cz
Lihovarská 1060/12 tel: +420 284 028 966, +49 911 740538747
190 00 Praha 9 fax: +420 284 028 951
Czech Republic http://www.suse.cz/
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problems building a kernelmodule for OE
2008-10-27 15:56 ` Stanislav Brabec
@ 2008-10-28 9:15 ` Henk Geraads
2008-10-28 11:51 ` Henk Geraads
0 siblings, 1 reply; 6+ messages in thread
From: Henk Geraads @ 2008-10-28 9:15 UTC (permalink / raw)
To: openembedded-devel
Hi Stanislav
questions,
> -----Oorspronkelijk bericht-----
> Van: openembedded-devel-bounces@lists.openembedded.org
> [mailto:openembedded-devel-bounces@lists.openembedded.org]Namens
> Stanislav Brabec
> Verzonden: maandag 27 oktober 2008 16:56
> Aan: openembedded-devel@lists.openembedded.org
> Onderwerp: Re: [oe] Problems building a kernelmodule for OE
>
>
> Henk Geraads wrote:
>
> > when I try to make the module, following error message is produced!
>
> It seems, that source code is a bit outdated (intended for older kernel
> that you have) or you are compiling it in a bad way.
>
> > include/linux/calc64.h:25: error: '__LINUX_ARM_ARCH__'
> undeclared (first use in this function)
>
> Strange. It should be defined.
Where should it be defined?
>
> > /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:67: warning:
> implicit declaration of function 'GPLR'
> > /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:67: warning:
> implicit declaration of function 'GPIO_bit'
> > /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c: In function 'cfi_init':
> > /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:204: error:
> 'GPIO_IN' undeclared (first use in this function)
> > /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:208: error:
> 'MSC1' undeclared (first use in this function)
> > /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:209: error:
> 'GPIO79_nCS_3_MD' undeclared (first use in this function)
>
> It indicates that you need to include asm/arch/pxa2xx-regs.h and
> asm/arch/pxa2xx-gpio.h.
Are these not covered by including "asm/uaccess.h" and "asm/io.h" ?
>
> --
> Best Regards / S pozdravem,
>
> Stanislav Brabec
> software developer
> ---------------------------------------------------------------------
> SUSE LINUX, s. r. o. e-mail: sbrabec@suse.cz
> Lihovarská 1060/12 tel: +420 284 028 966, +49 911 740538747
> 190 00 Praha 9 fax: +420 284 028 951
> Czech Republic http://www.suse.cz/
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problems building a kernelmodule for OE
2008-10-28 9:15 ` Henk Geraads
@ 2008-10-28 11:51 ` Henk Geraads
2008-10-28 23:10 ` Stanislav Brabec
0 siblings, 1 reply; 6+ messages in thread
From: Henk Geraads @ 2008-10-28 11:51 UTC (permalink / raw)
To: openembedded-devel
Hi Stanislav,
Found the problem with __LINUX_ARM_ARCH__!
the "-march=armv5t" in the makefie compiler line did mess up things!!
the include of the "pxa-regs.h" and "gpio.h" solved the other problem.
Now I've got strange error's from the linker;
make[2]: *** [/home/henk/SystemDev/module/cfi-ktst/cfi-mod.ko] Error 1
make[1]: *** [modules] Error 2
make: *** [default] Error 2
arm-angstrom-linux-gnueabi-ld: unrecognized option '-Wl,-rpath-link,/home/armcore/oe/build/tmp/angstrom/staging/arm-angstrom-linux-gnueabi/lib'
arm-angstrom-linux-gnueabi-ld: use the --help option for usage information
make[2]: *** [/home/henk/SystemDev/module/cfi-ktst/cfi-mod.ko] Error 1
make[1]: *** [modules] Error 2
make: *** [default] Error 2
I thought linker option's are very common?
Henk
> -----Oorspronkelijk bericht-----
> Van: Henk Geraads [mailto:linux@hf-electronics.com]
> Verzonden: dinsdag 28 oktober 2008 10:16
> Aan: openembedded-devel@lists.openembedded.org
> Onderwerp: RE: [oe] Problems building a kernelmodule for OE
>
>
> Hi Stanislav
>
> questions,
>
> > -----Oorspronkelijk bericht-----
> > Van: openembedded-devel-bounces@lists.openembedded.org
> > [mailto:openembedded-devel-bounces@lists.openembedded.org]Namens
> > Stanislav Brabec
> > Verzonden: maandag 27 oktober 2008 16:56
> > Aan: openembedded-devel@lists.openembedded.org
> > Onderwerp: Re: [oe] Problems building a kernelmodule for OE
> >
> >
> > Henk Geraads wrote:
> >
> > > when I try to make the module, following error message is produced!
> >
> > It seems, that source code is a bit outdated (intended for older kernel
> > that you have) or you are compiling it in a bad way.
> >
> > > include/linux/calc64.h:25: error: '__LINUX_ARM_ARCH__'
> > undeclared (first use in this function)
> >
> > Strange. It should be defined.
>
> Where should it be defined?
>
> >
> > > /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:67: warning:
> > implicit declaration of function 'GPLR'
> > > /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:67: warning:
> > implicit declaration of function 'GPIO_bit'
> > > /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c: In function 'cfi_init':
> > > /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:204: error:
> > 'GPIO_IN' undeclared (first use in this function)
> > > /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:208: error:
> > 'MSC1' undeclared (first use in this function)
> > > /home/henk/cm270/fifodrv/cfi-ktst/cfi-mod.c:209: error:
> > 'GPIO79_nCS_3_MD' undeclared (first use in this function)
> >
> > It indicates that you need to include asm/arch/pxa2xx-regs.h and
> > asm/arch/pxa2xx-gpio.h.
>
> Are these not covered by including "asm/uaccess.h" and "asm/io.h" ?
>
> >
> > --
> > Best Regards / S pozdravem,
> >
> > Stanislav Brabec
> > software developer
> > ---------------------------------------------------------------------
> > SUSE LINUX, s. r. o. e-mail: sbrabec@suse.cz
> > Lihovarská 1060/12 tel: +420 284 028 966, +49 911 740538747
> > 190 00 Praha 9 fax: +420 284 028 951
> > Czech Republic http://www.suse.cz/
> >
> >
> > _______________________________________________
> > Openembedded-devel mailing list
> > Openembedded-devel@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problems building a kernelmodule for OE
2008-10-28 11:51 ` Henk Geraads
@ 2008-10-28 23:10 ` Stanislav Brabec
2008-10-29 13:46 ` Henk Geraads
0 siblings, 1 reply; 6+ messages in thread
From: Stanislav Brabec @ 2008-10-28 23:10 UTC (permalink / raw)
To: openembedded-devel
Henk Geraads wrote:
> Found the problem with __LINUX_ARM_ARCH__!
> the "-march=armv5t" in the makefie compiler line did mess up things!!
It is very probably still not correct. When cross compiling the kernel,
you need to pass "ARCH=arm" to make (and set CPU type in .config.
Otherwise compile options may be invalid (and you can even corrupt
your .config file) and then correct -march should be generated by make.
> the include of the "pxa-regs.h" and "gpio.h" solved the other problem.
>
> Now I've got strange error's from the linker;
> make[2]: *** [/home/henk/SystemDev/module/cfi-ktst/cfi-mod.ko] Error 1
> make[1]: *** [modules] Error 2
> make: *** [default] Error 2
> arm-angstrom-linux-gnueabi-ld: unrecognized option '-Wl,-rpath-link,/home/armcore/oe/build/tmp/angstrom/staging/arm-angstrom-linux-gnueabi/lib'
> arm-angstrom-linux-gnueabi-ld: use the --help option for usage information
> make[2]: *** [/home/henk/SystemDev/module/cfi-ktst/cfi-mod.ko] Error 1
> make[1]: *** [modules] Error 2
> make: *** [default] Error 2
>
> I thought linker option's are very common?
-Wl is not an option for linker, but cor compiler. Linker should get
only parameters of -Wl. Additionally -rpath-link is not useful for
kernel (dynamic linking is an user space issue). Something went wrong
and make passed bad arguments to the linker.
Here is a make syntax I am using for kernel cross compilation:
make ARCH=arm CC=arm-angstrom-linux-gnueabi-gcc LD=arm-angstrom-linux-gnueabi-ld INSTALL_PATH=$PWD/INSTALL/boot INSTALL_MOD_PATH=$PWD/INSTALL
You may need to add target (e. g. zImage, install, zinstall,
modules_install).
________________________________________________________________________
Stanislav Brabec
http://www.penguin.cz/~utx/zaurus
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problems building a kernelmodule for OE
2008-10-28 23:10 ` Stanislav Brabec
@ 2008-10-29 13:46 ` Henk Geraads
0 siblings, 0 replies; 6+ messages in thread
From: Henk Geraads @ 2008-10-29 13:46 UTC (permalink / raw)
To: openembedded-devel
Hi Stanislav,
Thanks for the remarks, ideed it seems the .config file was messed up.
I did repopulate the kernel source tree again. Did "make ARCH=arm menuconfig"
Created a new kernel and also did use this new tree to succesfully build my own kernel module.
Best regards,
Henk
> -----Oorspronkelijk bericht-----
> Van: openembedded-devel-bounces@lists.openembedded.org
> [mailto:openembedded-devel-bounces@lists.openembedded.org]Namens
> Stanislav Brabec
> Verzonden: woensdag 29 oktober 2008 0:10
> Aan: openembedded-devel@lists.openembedded.org
> Onderwerp: Re: [oe] Problems building a kernelmodule for OE
>
>
> Henk Geraads wrote:
>
> > Found the problem with __LINUX_ARM_ARCH__!
> > the "-march=armv5t" in the makefie compiler line did mess up things!!
>
> It is very probably still not correct. When cross compiling the kernel,
> you need to pass "ARCH=arm" to make (and set CPU type in .config.
> Otherwise compile options may be invalid (and you can even corrupt
> your .config file) and then correct -march should be generated by make.
>
> > the include of the "pxa-regs.h" and "gpio.h" solved the other problem.
> >
> > Now I've got strange error's from the linker;
> > make[2]: ***
> [/home/henk/SystemDev/module/cfi-ktst/cfi-mod.ko] Error 1
> > make[1]: *** [modules] Error 2
> > make: *** [default] Error 2
> > arm-angstrom-linux-gnueabi-ld: unrecognized option
> '-Wl,-rpath-link,/home/armcore/oe/build/tmp/angstrom/staging/arm-a
> ngstrom-linux-gnueabi/lib'
> > arm-angstrom-linux-gnueabi-ld: use the --help option for
> usage information
> > make[2]: ***
> [/home/henk/SystemDev/module/cfi-ktst/cfi-mod.ko] Error 1
> > make[1]: *** [modules] Error 2
> > make: *** [default] Error 2
> >
> > I thought linker option's are very common?
>
> -Wl is not an option for linker, but cor compiler. Linker should get
> only parameters of -Wl. Additionally -rpath-link is not useful for
> kernel (dynamic linking is an user space issue). Something went wrong
> and make passed bad arguments to the linker.
>
> Here is a make syntax I am using for kernel cross compilation:
> make ARCH=arm CC=arm-angstrom-linux-gnueabi-gcc
> LD=arm-angstrom-linux-gnueabi-ld INSTALL_PATH=$PWD/INSTALL/boot
> INSTALL_MOD_PATH=$PWD/INSTALL
> You may need to add target (e. g. zImage, install, zinstall,
> modules_install).
>
>
> ________________________________________________________________________
> Stanislav Brabec
> http://www.penguin.cz/~utx/zaurus
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-10-29 13:48 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-10-27 8:13 Problems building a kernelmodule for OE Henk Geraads
2008-10-27 15:56 ` Stanislav Brabec
2008-10-28 9:15 ` Henk Geraads
2008-10-28 11:51 ` Henk Geraads
2008-10-28 23:10 ` Stanislav Brabec
2008-10-29 13:46 ` Henk Geraads
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox