* [PATCH 0/5 v2] Add CM-T35 support
@ 2009-12-09 7:13 Mike Rapoport
2009-12-09 7:13 ` [PATCH 1/5] u-boot git: add cm-t35 support Mike Rapoport
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Mike Rapoport @ 2009-12-09 7:13 UTC (permalink / raw)
To: openembedded-devel
This patchset adds support for CM-T35 system-on-module based on OMAP3 SoC.
Mike Rapoport (5):
u-boot git: add cm-t35 support
linux-omap 2.6.32: add cm-t35 support
cm-t35: add machine configuration
angstrom-led-config: Add LED setup for the cm-t35 and bump PR.
xserver-xorg-conf: add cm-t35 support
conf/machine/cm-t35.conf | 46 +
recipes/angstrom/angstrom-led-config.bb | 2 +-
recipes/angstrom/angstrom-led-config/cm-t35/leds | 2 +
.../0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch | 159 ++
...do24m-ensure-chip-select-changes-between-.patch | 30 +
...002-omap3-cm-t35-add-DSS2-display-support.patch | 307 ++++
...03-omap3-cm-t35-update-defconfig-for-DSS2.patch | 145 ++
.../0004-omap3-cm-t35-add-cm-t35-mux-configs.patch | 427 +++++
.../0006-omap3-cm-t35-update-defconfig.patch | 87 +
recipes/linux/linux-omap-2.6.32/cm-t35/defconfig | 1823 ++++++++++++++++++++
recipes/linux/linux-omap_2.6.32.bb | 9 +-
recipes/u-boot/u-boot-git/cm-t35/cm-t35.patch | 1487 ++++++++++++++++
recipes/u-boot/u-boot_git.bb | 2 +
.../xserver-xorg-conf/cm-t35/xorg.conf | 29 +
recipes/xorg-xserver/xserver-xorg-conf_0.1.bb | 2 +-
15 files changed, 4554 insertions(+), 3 deletions(-)
create mode 100644 conf/machine/cm-t35.conf
create mode 100644 recipes/angstrom/angstrom-led-config/cm-t35/leds
create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch
create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch
create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch
create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch
create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch
create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0006-omap3-cm-t35-update-defconfig.patch
create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/defconfig
create mode 100644 recipes/u-boot/u-boot-git/cm-t35/cm-t35.patch
create mode 100644 recipes/xorg-xserver/xserver-xorg-conf/cm-t35/xorg.conf
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/5] u-boot git: add cm-t35 support
2009-12-09 7:13 [PATCH 0/5 v2] Add CM-T35 support Mike Rapoport
@ 2009-12-09 7:13 ` Mike Rapoport
2009-12-09 7:13 ` [PATCH 2/5] linux-omap 2.6.32: " Mike Rapoport
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Mike Rapoport @ 2009-12-09 7:13 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
---
recipes/u-boot/u-boot-git/cm-t35/cm-t35.patch | 1487 +++++++++++++++++++++++++
recipes/u-boot/u-boot_git.bb | 2 +
2 files changed, 1489 insertions(+), 0 deletions(-)
create mode 100644 recipes/u-boot/u-boot-git/cm-t35/cm-t35.patch
diff --git a/recipes/u-boot/u-boot-git/cm-t35/cm-t35.patch b/recipes/u-boot/u-boot-git/cm-t35/cm-t35.patch
new file mode 100644
index 0000000..10e84a2
--- /dev/null
+++ b/recipes/u-boot/u-boot-git/cm-t35/cm-t35.patch
@@ -0,0 +1,1487 @@
+diff --git a/MAINTAINERS b/MAINTAINERS
+index d70a9d2..94e45f4 100644
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -677,6 +677,10 @@ Stelian Pop <stelian.pop@leadtechdesign.com>
+ at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
+ at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
+
++Mike Rapoport <mike@compulab.co.il>
++
++ cm_t35 ARM CORTEX-A8 (OMAP3xx SoC)
++
+ Tom Rix <Tom.Rix@windriver.com>
+
+ omap3_zoom2 ARM CORTEX-A8 (OMAP3xx SoC)
+diff --git a/MAKEALL b/MAKEALL
+index d63c5c2..e131c62 100755
+--- a/MAKEALL
++++ b/MAKEALL
+@@ -612,6 +612,7 @@ LIST_ARM11=" \
+ ## ARM Cortex-A8 Systems
+ #########################################################################
+ LIST_ARM_CORTEX_A8=" \
++ cm_t35 \
+ devkit8000 \
+ omap3_beagle \
+ omap3_overo \
+diff --git a/Makefile b/Makefile
+index bcb3fe9..9d6150a 100644
+--- a/Makefile
++++ b/Makefile
+@@ -3143,6 +3143,8 @@ SMN42_config : unconfig
+ #########################################################################
+ ## ARM CORTEX Systems
+ #########################################################################
++cm_t35_config : unconfig
++ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm_t35 NULL omap3
+
+ devkit8000_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
+diff --git a/board/cm_t35/Makefile b/board/cm_t35/Makefile
+new file mode 100644
+index 0000000..320a817
+--- /dev/null
++++ b/board/cm_t35/Makefile
+@@ -0,0 +1,47 @@
++#
++# (C) Copyright 2000, 2001, 2002
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).a
++
++COBJS := cm_t35.o
++
++SRCS := $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++
++$(LIB): $(obj).depend $(OBJS)
++ $(AR) $(ARFLAGS) $@ $(OBJS)
++
++clean:
++ rm -f $(OBJS)
++
++distclean: clean
++ rm -f $(LIB) core *.bak $(obj).depend
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
+diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c
+new file mode 100644
+index 0000000..a9bb86f
+--- /dev/null
++++ b/board/cm_t35/cm_t35.c
+@@ -0,0 +1,257 @@
++/*
++ * (C) Copyright 2009
++ * CompuLab, Ltd. <www.compulab.co.il>
++ *
++ * Authors :
++ * Igor Vaisbein <igor@compulab.co.il>
++ * Mike Rapoport <mike@compulab.co.il>
++ *
++ * Derived from omap3evm and Beagle Board by
++ * Manikandan Pillai <mani.pillai@ti.com>
++ * Richard Woodruff <r-woodruff2@ti.com>
++ * Syed Mohammed Khasim <x0khasim@ti.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <netdev.h>
++#include <net.h>
++#include <i2c.h>
++#include <twl4030.h>
++
++#include <asm/io.h>
++#include <asm/setup.h>
++#include <asm/arch/mem.h>
++#include <asm/arch/mux.h>
++#include <asm/arch/sys_proto.h>
++#include <asm/mach-types.h>
++
++#include "cm_t35.h"
++
++static u32 gpmc_net_config[GPMC_MAX_REG] = {
++ NET_GPMC_CONFIG1,
++ NET_GPMC_CONFIG2,
++ NET_GPMC_CONFIG3,
++ NET_GPMC_CONFIG4,
++ NET_GPMC_CONFIG5,
++ NET_GPMC_CONFIG6,
++ 0
++};
++
++static u32 gpmc_nand_config[GPMC_MAX_REG] = {
++ SMNAND_GPMC_CONFIG1,
++ SMNAND_GPMC_CONFIG2,
++ SMNAND_GPMC_CONFIG3,
++ SMNAND_GPMC_CONFIG4,
++ SMNAND_GPMC_CONFIG5,
++ SMNAND_GPMC_CONFIG6,
++ 0,
++};
++
++DECLARE_GLOBAL_DATA_PTR;
++
++/*
++ * Routine: board_init
++ * Description: Early hardware init.
++ */
++int board_init(void)
++{
++ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
++
++ enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[0],
++ CONFIG_SYS_NAND_BASE, GPMC_SIZE_16M);
++
++ /* board id for Linux */
++ gd->bd->bi_arch_number = MACH_TYPE_CM_T35;
++ /* boot param addr */
++ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
++
++ return 0;
++}
++
++/*
++ * Routine: misc_init_r
++ * Description: init i2c and dieid
++ */
++int misc_init_r(void)
++{
++#ifdef CONFIG_DRIVER_OMAP34XX_I2C
++ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
++#endif
++
++ dieid_num_r();
++
++ return 0;
++}
++
++/*
++ * Routine: set_muxconf_regs
++ * Description: Setting up the configuration Mux registers specific to the
++ * hardware. Many pins need to be moved from protect to primary
++ * mode.
++ */
++void set_muxconf_regs(void)
++{
++ MUX_CM_T35();
++}
++
++/*
++ * Routine: get_board_serial
++ * Description: read system serial number
++ */
++void get_board_serial(struct tag_serialnr *serialnr)
++{
++ u32 low, high;
++ int rc;
++
++ memset(serialnr, 0, sizeof(*serialnr));
++
++ rc = i2c_read(0x50, 0x8, 1, &low, sizeof(low));
++ if (rc)
++ return;
++
++ rc = i2c_read(0x50, 0xc, 1, &high, sizeof(high));
++ if (rc)
++ return;
++
++ if (low != 0xffffffff && high != 0xffffffff) {
++ serialnr->low = low;
++ serialnr->high = high;
++ }
++};
++
++/*
++ * Routine: get_board_rev
++ * Description: read system revision
++ */
++u32 get_board_rev(void)
++{
++ u16 rev;
++ int rc;
++
++ rc = i2c_read(0x50, 0x6, 1, &rev, sizeof(rev));
++ if (rc)
++ return 0;
++
++ return rev;
++};
++
++/*
++ * Routine: setup_net_chip_gmpc
++ * Description: Setting up the configuration GPMC registers specific to the
++ * Ethernet hardware.
++ */
++static void setup_net_chip_gmpc(void)
++{
++ struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
++
++ enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5],
++ CM_T35_SMC911X_BASE, GPMC_SIZE_16M);
++ enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4],
++ SB_T35_SMC911X_BASE, GPMC_SIZE_16M);
++
++ /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
++ writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
++
++ /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
++ writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
++
++ /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
++ writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
++ &ctrl_base->gpmc_nadv_ale);
++}
++
++#ifdef CONFIG_DRIVER_OMAP34XX_I2C
++/*
++ * Routine: reset_net_chip
++ * Description: reset the Ethernet controller via TPS65930 GPIO
++ */
++static void reset_net_chip(void)
++{
++ /* Set GPIO1 of TPS65930 as output */
++ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
++ TWL4030_BASEADD_GPIO+0x03);
++ /* Send a pulse on the GPIO pin */
++ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
++ TWL4030_BASEADD_GPIO+0x0C);
++ udelay(1);
++ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
++ TWL4030_BASEADD_GPIO+0x09);
++ udelay(1);
++ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
++ TWL4030_BASEADD_GPIO+0x0C);
++}
++#else
++static inline void reset_net_chip(void) {}
++#endif
++
++/*
++ * Routine: handle_mac_address
++ * Description: prepare MAC address for on-board Ethernet.
++ */
++static int handle_mac_address(void)
++{
++ unsigned char enetaddr[6];
++ int rc;
++
++ memset(enetaddr, 0, 6);
++ rc = eth_getenv_enetaddr("ethaddr", enetaddr);
++ if (rc)
++ return 0;
++
++#ifdef CONFIG_DRIVER_OMAP34XX_I2C
++ rc = i2c_read(0x50, 0, 1, enetaddr, 6);
++ if (rc)
++ return rc;
++#endif
++
++ if (!is_valid_ether_addr(enetaddr))
++ return -1;
++
++ return eth_setenv_enetaddr("ethaddr", enetaddr);
++}
++
++/*
++ * Routine: board_eth_init
++ * Description: initialize module and base-board Ethernet chips
++ */
++int board_eth_init(bd_t *bis)
++{
++ int rc = 0, rc1 = 0;
++
++#ifdef CONFIG_SMC911X
++ setup_net_chip_gmpc();
++ reset_net_chip();
++
++ rc1 = handle_mac_address();
++ if (rc1)
++ printf("CM-T35: No MAC address found\n");
++
++ rc1 = smc911x_initialize(0, CM_T35_SMC911X_BASE);
++ if (rc1 > 0)
++ rc++;
++
++ rc1 = smc911x_initialize(1, SB_T35_SMC911X_BASE);
++ if (rc1 > 0)
++ rc++;
++#endif
++
++ return rc;
++}
+diff --git a/board/cm_t35/cm_t35.h b/board/cm_t35/cm_t35.h
+new file mode 100644
+index 0000000..549422c
+--- /dev/null
++++ b/board/cm_t35/cm_t35.h
+@@ -0,0 +1,180 @@
++/*
++ * (C) Copyright 2009 CompuLab, Ltd
++ * Authors:
++ * Igor Vaisbein <igor@compulab.co.il>
++ * Mike Rapoport <mike@compulab.co.il>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++#ifndef _CM_T35_H_
++#define _CM_T35_H_
++
++const omap3_sysinfo sysinfo = {
++ DDR_DISCRETE,
++ "CM-T35 board",
++ "NAND",
++};
++
++/* static void setup_net_chip(void); */
++
++/*
++ * IEN - Input Enable
++ * IDIS - Input Disable
++ * PTD - Pull type Down
++ * PTU - Pull type Up
++ * DIS - Pull type selection is inactive
++ * EN - Pull type selection is active
++ * M0 - Mode 0
++ * The commented string gives the final mux configuration for that pin
++ */
++#define MUX_CM_T35() \
++ /*SDRC*/\
++ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\
++ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\
++ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\
++ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\
++ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\
++ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\
++ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\
++ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\
++ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\
++ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\
++ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\
++ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\
++ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\
++ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\
++ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\
++ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\
++ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\
++ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\
++ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\
++ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\
++ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\
++ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\
++ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\
++ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\
++ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\
++ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\
++ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\
++ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\
++ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\
++ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\
++ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\
++ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\
++ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\
++ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\
++ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\
++ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\
++ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\
++ /*GPMC*/\
++ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\
++ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\
++ MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\
++ MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\
++ MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\
++ MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\
++ MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\
++ MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/\
++ MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/\
++ MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/\
++ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\
++ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\
++ MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\
++ MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\
++ MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\
++ MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\
++ MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\
++ MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\
++ MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\
++ MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\
++ MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\
++ MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\
++ MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\
++ MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\
++ MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\
++ MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\
++ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\
++ /*Expansion card */\
++ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/ \
++ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/ \
++ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/ \
++ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/ \
++ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/ \
++ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/ \
++ /* SB-T35 Ethernet */\
++ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) /*GPMC_nCS4*/\
++ /* CM-T35 Ethernet */\
++ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)) /*GPMC_nCS5*/\
++ MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)) /*GPIO_59*/\
++ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*nADV_ALE*/\
++ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*nOE*/\
++ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*nWE*/\
++ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) /*nBE0_CLE*/\
++ MUX_VAL(CP(GPMC_NBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\
++ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*nWP*/\
++ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*WAIT0*/\
++ /*DSS*/\
++ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
++ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
++ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
++ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
++ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
++ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
++ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
++ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
++ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
++ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
++ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
++ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
++ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
++ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
++ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
++ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
++ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
++ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
++ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
++ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
++ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
++ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
++ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
++ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
++ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
++ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
++ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
++ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
++ /*Serial Interface*/\
++ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX*/\
++ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX*/\
++ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\
++ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\
++ /*Control and debug */\
++ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
++ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\
++ MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\
++ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*OFF_MODE*/\
++ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*CLKOUT1*/\
++ MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*green LED*/\
++ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\
++ MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\
++ MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\
++ MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\
++ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
++ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/\
++
++#endif
+diff --git a/board/cm_t35/config.mk b/board/cm_t35/config.mk
+new file mode 100644
+index 0000000..a90c86a
+--- /dev/null
++++ b/board/cm_t35/config.mk
+@@ -0,0 +1,30 @@
++#
++# (C) Copyright 2009
++# CompuLab, Ltd., <www.compulab.co.il>
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++# Physical Address:
++# 8000'0000 (bank0)
++#
++# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
++# (mem base + reserved)
++
++# For use with external or internal boots.
++TEXT_BASE = 0x80e80000
+diff --git a/cpu/arm_cortexa8/omap3/board.c b/cpu/arm_cortexa8/omap3/board.c
+index dd2c940..0b3805a 100644
+--- a/cpu/arm_cortexa8/omap3/board.c
++++ b/cpu/arm_cortexa8/omap3/board.c
+@@ -291,8 +291,11 @@ int dram_init(void)
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = size0;
++
++#if (CONFIG_NR_DRAM_BANKS > 1)
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1);
+ gd->bd->bi_dram[1].size = size1;
++#endif
+
+ return 0;
+ }
+diff --git a/cpu/arm_cortexa8/omap3/mem.c b/cpu/arm_cortexa8/omap3/mem.c
+index 8b8cd6d..be254b5 100644
+--- a/cpu/arm_cortexa8/omap3/mem.c
++++ b/cpu/arm_cortexa8/omap3/mem.c
+@@ -35,11 +35,6 @@
+ * Only One NAND allowed on board at a time.
+ * The GPMC CS Base for the same
+ */
+-unsigned int boot_flash_base;
+-unsigned int boot_flash_off;
+-unsigned int boot_flash_sec;
+-unsigned int boot_flash_type;
+-volatile unsigned int boot_flash_env_addr;
+
+ struct gpmc *gpmc_cfg;
+
+@@ -223,10 +218,6 @@ void gpmc_init(void)
+ const u32 *gpmc_config = NULL;
+ u32 base = 0;
+ u32 size = 0;
+-#if defined(CONFIG_ENV_IS_IN_NAND) || defined(CONFIG_ENV_IS_IN_ONENAND)
+- u32 f_off = CONFIG_SYS_MONITOR_LEN;
+- u32 f_sec = 0;
+-#endif
+ #endif
+ u32 config = 0;
+
+@@ -251,15 +242,6 @@ void gpmc_init(void)
+ base = PISMO1_NAND_BASE;
+ size = PISMO1_NAND_SIZE;
+ enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size);
+-#if defined(CONFIG_ENV_IS_IN_NAND)
+- f_off = SMNAND_ENV_OFFSET;
+- f_sec = (128 << 10); /* 128 KiB */
+- /* env setup */
+- boot_flash_base = base;
+- boot_flash_off = f_off;
+- boot_flash_sec = f_sec;
+- boot_flash_env_addr = f_off;
+-#endif
+ #endif
+
+ #if defined(CONFIG_CMD_ONENAND)
+@@ -267,14 +249,5 @@ void gpmc_init(void)
+ base = PISMO1_ONEN_BASE;
+ size = PISMO1_ONEN_SIZE;
+ enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size);
+-#if defined(CONFIG_ENV_IS_IN_ONENAND)
+- f_off = ONENAND_ENV_OFFSET;
+- f_sec = (128 << 10); /* 128 KiB */
+- /* env setup */
+- boot_flash_base = base;
+- boot_flash_off = f_off;
+- boot_flash_sec = f_sec;
+- boot_flash_env_addr = f_off;
+-#endif
+ #endif
+ }
+diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c
+index 31b2003..3f66a6a 100644
+--- a/cpu/arm_cortexa8/omap3/sys_info.c
++++ b/cpu/arm_cortexa8/omap3/sys_info.c
+@@ -173,15 +173,6 @@ u32 get_gpmc0_width(void)
+ return WIDTH_16BIT;
+ }
+
+-/*************************************************************************
+- * get_board_rev() - setup to pass kernel board revision information
+- * returns:(bit[0-3] sub version, higher bit[7-4] is higher version)
+- *************************************************************************/
+-u32 get_board_rev(void)
+-{
+- return 0x20;
+-}
+-
+ /********************************************************
+ * get_base(); get upper addr of current execution
+ *******************************************************/
+diff --git a/doc/README.omap3 b/doc/README.omap3
+index 6227151..1c1c16f 100644
+--- a/doc/README.omap3
++++ b/doc/README.omap3
+@@ -21,6 +21,8 @@ Currently the following boards are supported:
+
+ * TI/Logic PD Zoom 2 [7]
+
++* CompuLab Ltd. CM-T35 [8]
++
+ Toolchain
+ =========
+
+@@ -61,6 +63,11 @@ make
+ make omap3_zoom2_config
+ make
+
++* CM-T35:
++
++make cm_t35_config
++make
++
+ Custom commands
+ ===============
+
+@@ -119,7 +126,7 @@ To read a bit :
+ Acknowledgements
+ ================
+
+-OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by
++OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by
+ several TI employees.
+
+ Links
+@@ -153,6 +160,11 @@ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
+ [7] TI/Logic PD Zoom 2
+
+ http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
+-[8] TI OMAP3 U-Boot:
++
++[8] CompuLab Ltd. CM-T35:
++
++http://www.compulab.co.il/t35/html/t35-cm-datasheet.htm
++
++[9] TI OMAP3 U-Boot:
+
+ http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
+diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
+index c027abe..8509b6a 100644
+--- a/drivers/net/smc911x.c
++++ b/drivers/net/smc911x.c
+@@ -37,7 +37,7 @@ void pkt_data_push(struct eth_device *dev, u32 addr, u32 val) \
+
+ #define mdelay(n) udelay((n)*1000)
+
+-static void smx911x_handle_mac_address(struct eth_device *dev)
++static void smc911x_handle_mac_address(struct eth_device *dev)
+ {
+ unsigned long addrh, addrl;
+ uchar *m = dev->enetaddr;
+@@ -47,7 +47,7 @@ static void smx911x_handle_mac_address(struct eth_device *dev)
+ smc911x_set_mac_csr(dev, ADDRL, addrl);
+ smc911x_set_mac_csr(dev, ADDRH, addrh);
+
+- printf(DRIVERNAME ": MAC %pM\n", m);
++ printf("%s: MAC %pM\n", dev->name, m);
+ }
+
+ static int smc911x_miiphy_read(struct eth_device *dev,
+@@ -119,12 +119,12 @@ static void smc911x_phy_configure(struct eth_device *dev)
+ goto err_out;
+ } while (!(status & PHY_BMSR_LS));
+
+- printf(DRIVERNAME ": phy initialized\n");
++ printf("%s: phy initialized\n", dev->name);
+
+ return;
+
+ err_out:
+- printf(DRIVERNAME ": autonegotiation timed out\n");
++ printf("%s: autonegotiation timed out\n", dev->name);
+ }
+
+ static void smc911x_enable(struct eth_device *dev)
+@@ -148,14 +148,14 @@ static int smc911x_init(struct eth_device *dev, bd_t * bd)
+ {
+ struct chip_id *id = dev->priv;
+
+- printf(DRIVERNAME ": detected %s controller\n", id->name);
++ printf("%s: detected %s controller\n", dev->name, id->name);
+
+ smc911x_reset(dev);
+
+ /* Configure the PHY, initialize the link state */
+ smc911x_phy_configure(dev);
+
+- smx911x_handle_mac_address(dev);
++ smc911x_handle_mac_address(dev);
+
+ /* Turn on Tx + Rx */
+ smc911x_enable(dev);
+@@ -193,7 +193,7 @@ static int smc911x_send(struct eth_device *dev,
+ if (!status)
+ return 0;
+
+- printf(DRIVERNAME ": failed to send packet: %s%s%s%s%s\n",
++ printf("%s: failed to send packet: %s%s%s%s%s\n", dev->name,
+ status & TX_STS_LOC ? "TX_STS_LOC " : "",
+ status & TX_STS_LATE_COLL ? "TX_STS_LATE_COLL " : "",
+ status & TX_STS_MANY_COLL ? "TX_STS_MANY_COLL " : "",
+@@ -206,6 +206,10 @@ static int smc911x_send(struct eth_device *dev,
+ static void smc911x_halt(struct eth_device *dev)
+ {
+ smc911x_reset(dev);
++
++#ifdef CONFIG_SMC911X_KEEP_MAC
++ smc911x_handle_mac_address(dev);
++#endif
+ }
+
+ static int smc911x_rx(struct eth_device *dev)
+@@ -225,9 +229,8 @@ static int smc911x_rx(struct eth_device *dev)
+ *data++ = pkt_data_pull(dev, RX_DATA_FIFO);
+
+ if (status & RX_STS_ES)
+- printf(DRIVERNAME
+- ": dropped bad packet. Status: 0x%08x\n",
+- status);
++ printf("%s: dropped bad packet. Status: 0x%08x\n",
++ dev->name, status);
+ else
+ NetReceive(NetRxPackets[0], pktlen);
+ }
+@@ -238,6 +241,7 @@ static int smc911x_rx(struct eth_device *dev)
+ int smc911x_initialize(u8 dev_num, int base_addr)
+ {
+ unsigned long addrl, addrh;
++ unsigned char enetaddr[6];
+ struct eth_device *dev;
+
+ dev = malloc(sizeof(*dev));
+@@ -248,6 +252,7 @@ int smc911x_initialize(u8 dev_num, int base_addr)
+ memset(dev, 0, sizeof(*dev));
+
+ dev->iobase = base_addr;
++ sprintf(dev->name, "%s-%hu", DRIVERNAME, dev_num);
+
+ /* Try to detect chip. Will fail if not present. */
+ if (smc911x_detect_chip(dev)) {
+@@ -257,18 +262,20 @@ int smc911x_initialize(u8 dev_num, int base_addr)
+
+ addrh = smc911x_get_mac_csr(dev, ADDRH);
+ addrl = smc911x_get_mac_csr(dev, ADDRL);
+- dev->enetaddr[0] = addrl;
+- dev->enetaddr[1] = addrl >> 8;
+- dev->enetaddr[2] = addrl >> 16;
+- dev->enetaddr[3] = addrl >> 24;
+- dev->enetaddr[4] = addrh;
+- dev->enetaddr[5] = addrh >> 8;
++ enetaddr[0] = addrl;
++ enetaddr[1] = addrl >> 8;
++ enetaddr[2] = addrl >> 16;
++ enetaddr[3] = addrl >> 24;
++ enetaddr[4] = addrh;
++ enetaddr[5] = addrh >> 8;
++
++ if (is_valid_ether_addr(enetaddr))
++ memcpy(dev->enetaddr, enetaddr, 6);
+
+ dev->init = smc911x_init;
+ dev->halt = smc911x_halt;
+ dev->send = smc911x_send;
+ dev->recv = smc911x_rx;
+- sprintf(dev->name, "%s-%hu", DRIVERNAME, dev_num);
+
+ eth_register(dev);
+ return 1;
+diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
+index 05e007c..0ea6ac1 100644
+--- a/drivers/net/smc911x.h
++++ b/drivers/net/smc911x.h
+@@ -447,7 +447,7 @@ static int smc911x_detect_chip(struct eth_device *dev)
+ /* Special case -- no chip present */
+ return -1;
+ } else if (val != 0x87654321) {
+- printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val);
++ printf("%s: Invalid chip endian 0x%08lx\n", __func__, val);
+ return -1;
+ }
+
+@@ -456,7 +456,7 @@ static int smc911x_detect_chip(struct eth_device *dev)
+ if (chip_ids[i].id == val) break;
+ }
+ if (!chip_ids[i].id) {
+- printf(DRIVERNAME ": Unknown chip ID %04lx\n", val);
++ printf("%s: Unknown chip ID %04lx\n", __func__, val);
+ return -1;
+ }
+
+@@ -480,8 +480,8 @@ static void smc911x_reset(struct eth_device *dev)
+ !(smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY))
+ udelay(10);
+ if (!timeout) {
+- printf(DRIVERNAME
+- ": timeout waiting for PM restore\n");
++ printf("%s: timeout waiting for PM restore\n",
++ dev->name);
+ return;
+ }
+ }
+@@ -496,7 +496,7 @@ static void smc911x_reset(struct eth_device *dev)
+ udelay(10);
+
+ if (!timeout) {
+- printf(DRIVERNAME ": reset timeout\n");
++ printf("%s: reset timeout\n", dev->name);
+ return;
+ }
+
+diff --git a/examples/api/Makefile b/examples/api/Makefile
+index 04a270b..057e85a 100644
+--- a/examples/api/Makefile
++++ b/examples/api/Makefile
+@@ -49,6 +49,12 @@ ifeq ($(ARCH),ppc)
+ EXT_SOBJ_FILES-$(CONFIG_API) += lib_ppc/ppcstring.o
+ endif
+
++ifeq ($(ARCH),arm)
++ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS)))
++EXT_COBJ_FILES-$(CONFIG_API) += lib_arm/eabi_compat.o
++endif
++endif
++
+ # Create a list of source files so their dependencies can be auto-generated
+ SRCS += $(addprefix $(SRCTREE)/,$(EXT_COBJ_FILES-y:.o=.c))
+ SRCS += $(addprefix $(SRCTREE)/,$(EXT_SOBJ_FILES-y:.o=.S))
+@@ -81,6 +87,10 @@ $(obj)%.o: $(SRCTREE)/lib_generic/%.c
+ $(obj)%.o: $(SRCTREE)/lib_$(ARCH)/%.S
+ $(CC) -g $(CFLAGS) -c -o $@ $<
+
++# Rule to build architecture-specific library C files
++$(obj)%.o: $(SRCTREE)/lib_$(ARCH)/%.c
++ $(CC) -g $(CFLAGS) -c -o $@ $<
++
+ #########################################################################
+
+ # defines $(obj).depend target
+diff --git a/include/asm-arm/arch-omap3/cpu.h b/include/asm-arm/arch-omap3/cpu.h
+index 8ab2e39..7fdf00f 100644
+--- a/include/asm-arm/arch-omap3/cpu.h
++++ b/include/asm-arm/arch-omap3/cpu.h
+@@ -136,6 +136,10 @@ struct gpmc {
+ u32 ecc8_result; /* 0x21C */
+ u32 ecc9_result; /* 0x220 */
+ };
++
++/* Used for board specific gpmc initialization */
++extern struct gpmc *gpmc_cfg;
++
+ #else /* __ASSEMBLY__ */
+ #define GPMC_CONFIG1 0x00
+ #define GPMC_CONFIG2 0x04
+diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
+new file mode 100644
+index 0000000..37edbb5
+--- /dev/null
++++ b/include/configs/cm_t35.h
+@@ -0,0 +1,281 @@
++/*
++ * (C) Copyright 2009 CompuLab, Ltd.
++ *
++ * Authors :
++ * Igor Vaisbein <igor@compulab.co.il>
++ * Mike Rapoport <mike@compulab.co.il>
++ *
++ * Derived from omap3evm and Beagle Board by
++ * Manikandan Pillai <mani.pillai@ti.com>
++ * Richard Woodruff <r-woodruff2@ti.com>
++ * Syed Mohammed Khasim <x0khasim@ti.com>
++ *
++ * Configuration settings for the CompuLab CM-T35 board.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/* High Level Configuration Options */
++#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
++#define CONFIG_OMAP 1 /* in a TI OMAP core */
++#define CONFIG_OMAP34XX 1 /* which is a 34XX */
++#define CONFIG_OMAP3430 1 /* which is in a 3430 */
++#define CONFIG_CM_T35 1 /* working with CM_T35 */
++
++#include <asm/arch/cpu.h> /* get chip and board defs */
++#include <asm/arch/omap3.h>
++
++#define CONFIG_DISPLAY_CPUINFO 1
++#define CONFIG_DISPLAY_BOARDINFO 1
++
++/* Clock Defines */
++#define V_OSCK 26000000 /* Clock output from T2 */
++#define V_SCLK (V_OSCK >> 1)
++
++/* DDR type - Micron */
++#define CONFIG_OMAP3_MICRON_DDR 1
++
++#undef CONFIG_USE_IRQ /* no support for IRQs */
++#define CONFIG_MISC_INIT_R
++
++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
++#define CONFIG_SETUP_MEMORY_TAGS 1
++#define CONFIG_INITRD_TAG 1
++#define CONFIG_REVISION_TAG 1
++#define CONFIG_SERIAL_TAG 1
++
++/* Size of malloc() pool */
++#define CONFIG_ENV_SIZE (128 << 10) /* Total Size Environment */
++ /* Sector */
++#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (512 << 10))
++#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */
++ /* initial data */
++/* NS16550 Configuration */
++#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
++
++#define CONFIG_SYS_NS16550
++#define CONFIG_SYS_NS16550_SERIAL
++#define CONFIG_SYS_NS16550_REG_SIZE (-4)
++#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
++
++/* serial console configuration */
++#define CONFIG_CONS_INDEX 3
++#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
++#define CONFIG_SERIAL3 3 /* UART3 */
++
++/* allow to overwrite serial and ethaddr */
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
++ 115200}
++#define CONFIG_MMC 1
++#define CONFIG_OMAP3_MMC 1
++#define CONFIG_SYS_MMC_MAX_DEVICE 1
++#define CONFIG_DOS_PARTITION 1
++
++/* commands to include */
++#include <config_cmd_default.h>
++
++#define CONFIG_CMD_EXT2 /* EXT2 Support */
++#define CONFIG_CMD_FAT /* FAT support */
++#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
++#define CONFIG_CMD_YAFFS2 /* YAFFS2 Support */
++#define CONFIG_CMD_UBI /* UBI Support */
++#define CONFIG_CMD_MTDPARTS
++
++#define CONFIG_CMD_I2C /* I2C serial bus support */
++#define CONFIG_CMD_MMC /* MMC support */
++#define CONFIG_CMD_NAND /* NAND support */
++#define CONFIG_CMD_DHCP
++#define CONFIG_CMD_PING
++
++#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
++#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
++#undef CONFIG_CMD_IMLS /* List all found images */
++
++#define CONFIG_SYS_NO_FLASH
++
++/* I2C */
++#define CONFIG_SYS_I2C_SPEED 100000
++#define CONFIG_SYS_I2C_SLAVE 1
++#define CONFIG_SYS_I2C_BUS 0
++#define CONFIG_SYS_I2C_BUS_SELECT 1
++#define CONFIG_DRIVER_OMAP34XX_I2C 1
++
++/* TWL4030 */
++#define CONFIG_TWL4030_POWER 1
++
++/* Board NAND Info. */
++#define CONFIG_NAND_OMAP_GPMC 1
++#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
++#define OMAP34XX_GPMC_NAND_SMNAND 1
++
++#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
++ /* to access nand */
++#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
++ /* to access */
++ /* nand at CS0 */
++
++#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
++ /* NAND devices */
++#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
++
++/* JFFS2 */
++#define CONFIG_JFFS2_NAND
++#define CONFIG_JFFS2_DEV "nand0"
++#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
++ CONFIG_SYS_MAX_NAND_DEVICE)
++#define CONFIG_SYS_JFFS2_MEM_NAND
++#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
++#define CONFIG_SYS_JFFS2_NUM_BANKS 1
++
++/* ubi/ubifs related definitions */
++#define CONFIG_RBTREE
++#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
++#define CONFIG_MTD_PARTITIONS
++
++/* Environment information */
++#define CONFIG_BOOTDELAY 3
++
++#define CONFIG_BOOTFILE uImage
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ "loadaddr=0x82000000\0" \
++ "baudrate=115200\0"\
++ "console=ttyS2,115200n8\0" \
++ "autoload=no\0" \
++ "mmcargs=setenv bootargs console=${console} " \
++ "root=/dev/mmcblk0p2 rw " \
++ "rootfstype=ext3 rootwait\0" \
++ "nandargs=setenv bootargs console=${console} " \
++ "root=/dev/mtdblock4 rw " \
++ "rootfstype=jffs2\0" \
++ "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
++ "bootscript=echo Running bootscript from mmc ...; " \
++ "source ${loadaddr}\0" \
++ "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
++ "mmcboot=echo Booting from mmc ...; " \
++ "run mmcargs; " \
++ "bootm ${loadaddr}\0" \
++ "nandboot=echo Booting from nand ...; " \
++ "run nandargs; " \
++ "onenand read ${loadaddr} 280000 400000; " \
++ "bootm ${loadaddr}\0" \
++
++#define CONFIG_BOOTCOMMAND \
++ "if mmc init; then " \
++ "if run loadbootscript; then " \
++ "run bootscript; " \
++ "else " \
++ "if run loaduimage; then " \
++ "run mmcboot; " \
++ "else run nandboot; " \
++ "fi; " \
++ "fi; " \
++ "else run nandboot; fi"
++
++#define MTDIDS_DEFAULT "nand0=nand"
++#define MTDPARTS_DEFAULT "mtdparts=nand:512k(xloader)," \
++ "1920k(u-boot)," \
++ "256k(env)," \
++ "4m(kernel)," \
++ "-(fs),"
++
++#define CONFIG_AUTO_COMPLETE 1
++/*
++ * Miscellaneous configurable options
++ */
++#define CONFIG_API 1
++#define V_PROMPT "CM-T35 # "
++
++#define CONFIG_SYS_LONGHELP /* undef to save memory */
++#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
++#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
++#define CONFIG_SYS_PROMPT V_PROMPT
++#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
++
++/* Print Buffer Size */
++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
++ sizeof(CONFIG_SYS_PROMPT) + 16)
++#define CONFIG_SYS_MAXARGS 16 /* max number of command */
++ /* args */
++/* Boot Argument Buffer Size */
++#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
++
++/* memtest works on */
++#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000)
++#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x08000000)
++
++#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
++ /* address */
++
++/*
++ * OMAP3 has 12 GP timers, they can be driven by the system clock
++ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
++ * This rate is divided by a local divisor.
++ */
++#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
++#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
++#define CONFIG_SYS_HZ 1000
++
++/*
++ * Stack sizes
++ *
++ * The stack sizes are set up in start.S using the settings below
++ */
++#define CONFIG_STACKSIZE (128 << 10) /* regular stack */
++#ifdef CONFIG_USE_IRQ
++#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */
++#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */
++#endif
++
++/* Physical Memory Map */
++#define CONFIG_NR_DRAM_BANKS 1 /* CS1 may not be populated on CM-T35 */
++#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
++#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 meg */
++
++/* SDRAM Bank Allocation method */
++#define SDRC_R_B_C 1
++
++/* PISMO support */
++#define PISMO1_NAND_SIZE GPMC_SIZE_128M
++
++/* environment */
++#define CONFIG_ENV_IS_IN_NAND 1
++#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
++#define CONFIG_SYS_ENV_SECT_SIZE (1 << 128)
++#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
++
++/* SMSC9220 Ethernet */
++#if defined(CONFIG_CMD_NET)
++#define CONFIG_NET_MULTI
++#define CONFIG_SMC911X
++#define CONFIG_SMC911X_32_BIT
++#define CONFIG_SMC911X_KEEP_MAC
++#define CM_T35_SMC911X_BASE 0x2C000000
++#define SB_T35_SMC911X_BASE (CM_T35_SMC911X_BASE + (16 << 20))
++#define CONFIG_SMC911X_BASE CM_T35_SMC911X_BASE /* for smc911x_eeprom */
++#endif /* (CONFIG_CMD_NET) */
++
++#define CONFIG_OMAP3_GPIO_6 1
++
++#endif /* __CONFIG_H */
+diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
+index bd5037e..bac5127 100644
+--- a/include/configs/devkit8000.h
++++ b/include/configs/devkit8000.h
+@@ -293,15 +293,6 @@
+ #define CONFIG_ENV_IS_IN_NAND 1
+ #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
+
+-#define CONFIG_ENV_OFFSET boot_flash_off
+-
+-#ifndef __ASSEMBLY__
+-extern struct gpmc *gpmc_cfg;
+-extern unsigned int boot_flash_base;
+-extern volatile unsigned int boot_flash_env_addr;
+-extern unsigned int boot_flash_off;
+-extern unsigned int boot_flash_sec;
+-extern unsigned int boot_flash_type;
+-#endif
++#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
+
+ #endif /* __CONFIG_H */
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index 19a5ec9..73ead6c 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -291,8 +291,8 @@
+ #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
+ #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
+
+-#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
+-#define CONFIG_ENV_OFFSET boot_flash_off
++#define CONFIG_SYS_ENV_SECT_SIZE (1 << 128)
++#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
+ #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
+
+ /*-----------------------------------------------------------------------
+@@ -310,13 +310,4 @@
+ #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
+ #define CONFIG_SYS_JFFS2_NUM_BANKS 1
+
+-#ifndef __ASSEMBLY__
+-extern struct gpmc *gpmc_cfg;
+-extern unsigned int boot_flash_base;
+-extern volatile unsigned int boot_flash_env_addr;
+-extern unsigned int boot_flash_off;
+-extern unsigned int boot_flash_sec;
+-extern unsigned int boot_flash_type;
+-#endif
+-
+ #endif /* __CONFIG_H */
+diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
+index a5514ae..70eb86b 100644
+--- a/include/configs/omap3_evm.h
++++ b/include/configs/omap3_evm.h
+@@ -262,7 +262,7 @@
+ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
+ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
+
+-#define CONFIG_SYS_FLASH_BASE boot_flash_base
++#define CONFIG_SYS_FLASH_BASE ONENAND_MAP
+
+ /* Monitor at start of flash */
+ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+@@ -272,9 +272,9 @@
+ #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
+ #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
+
+-#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
+-#define CONFIG_ENV_OFFSET boot_flash_off
+-#define CONFIG_ENV_ADDR boot_flash_env_addr
++#define CONFIG_SYS_ENV_SECT_SIZE (1 << 128)
++#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET
++#define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET
+
+ /*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+@@ -291,15 +291,6 @@
+ #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
+ #define CONFIG_SYS_JFFS2_NUM_BANKS 1
+
+-#ifndef __ASSEMBLY__
+-extern struct gpmc *gpmc_cfg;
+-extern unsigned int boot_flash_base;
+-extern volatile unsigned int boot_flash_env_addr;
+-extern unsigned int boot_flash_off;
+-extern unsigned int boot_flash_sec;
+-extern unsigned int boot_flash_type;
+-#endif
+-
+ /*----------------------------------------------------------------------------
+ * SMSC9115 Ethernet from SMSC9118 family
+ *----------------------------------------------------------------------------
+diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
+index ffb515d..6ffae60 100644
+--- a/include/configs/omap3_overo.h
++++ b/include/configs/omap3_overo.h
+@@ -266,7 +266,7 @@
+ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
+ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
+
+-#define CONFIG_SYS_FLASH_BASE boot_flash_base
++#define CONFIG_SYS_FLASH_BASE NAND_BASE
+
+ /* Monitor at start of flash */
+ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+@@ -276,8 +276,8 @@
+ #define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */
+ #define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */
+
+-#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
+-#define CONFIG_ENV_OFFSET boot_flash_off
++#define CONFIG_SYS_ENV_SECT_SIZE (1 << 128)
++#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
+ #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
+
+ /*-----------------------------------------------------------------------
+@@ -295,15 +295,6 @@
+ #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
+ #define CONFIG_SYS_JFFS2_NUM_BANKS 1
+
+-#ifndef __ASSEMBLY__
+-extern struct gpmc *gpmc_cfg;
+-extern unsigned int boot_flash_base;
+-extern volatile unsigned int boot_flash_env_addr;
+-extern unsigned int boot_flash_off;
+-extern unsigned int boot_flash_sec;
+-extern unsigned int boot_flash_type;
+-#endif
+-
+ #if defined(CONFIG_CMD_NET)
+ /*----------------------------------------------------------------------------
+ * SMSC9211 Ethernet from SMSC9118 family
+diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
+index 6f21af3..041412e 100644
+--- a/include/configs/omap3_pandora.h
++++ b/include/configs/omap3_pandora.h
+@@ -259,7 +259,7 @@
+ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
+ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
+
+-#define CONFIG_SYS_FLASH_BASE boot_flash_base
++#define CONFIG_SYS_FLASH_BASE ONENAND_MAP
+
+ /* Monitor at start of flash */
+ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+@@ -269,8 +269,8 @@
+ #define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */
+ #define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */
+
+-#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
+-#define CONFIG_ENV_OFFSET boot_flash_off
++#define CONFIG_SYS_ENV_SECT_SIZE (1 << 128)
++#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
+ #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
+
+ /*-----------------------------------------------------------------------
+@@ -288,13 +288,4 @@
+ #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
+ #define CONFIG_SYS_JFFS2_NUM_BANKS 1
+
+-#ifndef __ASSEMBLY__
+-extern struct gpmc *gpmc_cfg;
+-extern unsigned int boot_flash_base;
+-extern volatile unsigned int boot_flash_env_addr;
+-extern unsigned int boot_flash_off;
+-extern unsigned int boot_flash_sec;
+-extern unsigned int boot_flash_type;
+-#endif
+-
+ #endif /* __CONFIG_H */
+diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
+index 229dc5e..3ec7ce0 100644
+--- a/include/configs/omap3_sdp3430.h
++++ b/include/configs/omap3_sdp3430.h
+@@ -355,15 +355,4 @@
+ * - rest for filesystem
+ */
+
+-/*--------------------------------------------------------------------------*/
+-
+-#ifndef __ASSEMBLY__
+-extern struct gpmc *gpmc_cfg;
+-extern unsigned int boot_flash_base;
+-extern volatile unsigned int boot_flash_env_addr;
+-extern unsigned int boot_flash_off;
+-extern unsigned int boot_flash_sec;
+-extern unsigned int boot_flash_type;
+-#endif
+-
+ #endif /* __CONFIG_H */
+diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
+index da4b677..9811f15 100644
+--- a/include/configs/omap3_zoom1.h
++++ b/include/configs/omap3_zoom1.h
+@@ -267,7 +267,7 @@
+ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
+ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
+
+-#define CONFIG_SYS_FLASH_BASE boot_flash_base
++#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NAND_BASE
+
+ /* Monitor at start of flash */
+ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+@@ -277,8 +277,8 @@
+ #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
+ #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
+
+-#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
+-#define CONFIG_ENV_OFFSET boot_flash_off
++#define CONFIG_SYS_ENV_SECT_SIZE (1 << 128)
++#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
+ #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
+
+ /*-----------------------------------------------------------------------
+@@ -296,13 +296,4 @@
+ #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
+ #define CONFIG_SYS_JFFS2_NUM_BANKS 1
+
+-#ifndef __ASSEMBLY__
+-extern struct gpmc *gpmc_cfg;
+-extern unsigned int boot_flash_base;
+-extern volatile unsigned int boot_flash_env_addr;
+-extern unsigned int boot_flash_off;
+-extern unsigned int boot_flash_sec;
+-extern unsigned int boot_flash_type;
+-#endif
+-
+ #endif /* __CONFIG_H */
+diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
+index 32cd6fd..1a23acd 100644
+--- a/include/configs/omap3_zoom2.h
++++ b/include/configs/omap3_zoom2.h
+@@ -232,7 +232,7 @@
+ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
+ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
+
+-#define CONFIG_SYS_FLASH_BASE boot_flash_base
++#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NAND_BASE
+
+ /* Monitor at start of flash */
+ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+@@ -240,8 +240,8 @@
+ #define CONFIG_ENV_IS_IN_NAND 1
+ #define SMNAND_ENV_OFFSET 0x0c0000 /* environment starts here */
+
+-#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
+-#define CONFIG_ENV_OFFSET boot_flash_off
++#define CONFIG_SYS_ENV_SECT_SIZE (1 << 128)
++#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
+ #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
+
+ /*-----------------------------------------------------------------------
+@@ -251,13 +251,4 @@
+ #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
+ #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
+
+-#ifndef __ASSEMBLY__
+-extern struct gpmc *gpmc_cfg;
+-extern unsigned int boot_flash_base;
+-extern volatile unsigned int boot_flash_env_addr;
+-extern unsigned int boot_flash_off;
+-extern unsigned int boot_flash_sec;
+-extern unsigned int boot_flash_type;
+-#endif
+-
+ #endif /* __CONFIG_H */
diff --git a/recipes/u-boot/u-boot_git.bb b/recipes/u-boot/u-boot_git.bb
index e914d78..5fcf7c5 100644
--- a/recipes/u-boot/u-boot_git.bb
+++ b/recipes/u-boot/u-boot_git.bb
@@ -11,8 +11,10 @@ SRCREV_c7x0 = "9bf86baaa3b35b25baa2d664e2f7f6cafad689ee"
SRCREV_afeb9260 = "6b8edfde22acc574b5532e9f086e6a7287a9bc78"
SRCREV_afeb9260-180 = "6b8edfde22acc574b5532e9f086e6a7287a9bc78"
SRCREV_palmpre = "6b8edfde22acc574b5532e9f086e6a7287a9bc78"
+SRCREV_cm-t35 = "3c014f1586d5bfe30dca7549396915c83f31cd30"
SRC_URI_append_afeb9260 = " file://AFEB9260-network-fix.patch;patch=1"
SRC_URI_append_afeb9260-180 = " file://AFEB9260-network-fix.patch;patch=1"
+SRC_URI_append_cm-t35 = "file://cm-t35/cm-t35.patch;patch=1"
SRC_URI_beagleboard = "git://git.denx.de/u-boot-ti.git;protocol=git \
file://fw_env.config \
--
1.6.4.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/5] linux-omap 2.6.32: add cm-t35 support
2009-12-09 7:13 [PATCH 0/5 v2] Add CM-T35 support Mike Rapoport
2009-12-09 7:13 ` [PATCH 1/5] u-boot git: add cm-t35 support Mike Rapoport
@ 2009-12-09 7:13 ` Mike Rapoport
2009-12-09 7:13 ` [PATCH 3/5] cm-t35: add machine configuration Mike Rapoport
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Mike Rapoport @ 2009-12-09 7:13 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
---
.../0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch | 159 ++
...do24m-ensure-chip-select-changes-between-.patch | 30 +
...002-omap3-cm-t35-add-DSS2-display-support.patch | 307 ++++
...03-omap3-cm-t35-update-defconfig-for-DSS2.patch | 145 ++
.../0004-omap3-cm-t35-add-cm-t35-mux-configs.patch | 427 +++++
.../0006-omap3-cm-t35-update-defconfig.patch | 87 +
recipes/linux/linux-omap-2.6.32/cm-t35/defconfig | 1823 ++++++++++++++++++++
recipes/linux/linux-omap_2.6.32.bb | 9 +-
8 files changed, 2986 insertions(+), 1 deletions(-)
create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch
create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch
create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch
create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch
create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch
create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0006-omap3-cm-t35-update-defconfig.patch
create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/defconfig
diff --git a/recipes/linux/linux-omap-2.6.32/cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch b/recipes/linux/linux-omap-2.6.32/cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch
new file mode 100644
index 0000000..423b29f
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.32/cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch
@@ -0,0 +1,159 @@
+From 971595be3dc245cfa095747263b94535d27a3f1c Mon Sep 17 00:00:00 2001
+From: Mike Rapoport <mike@compulab.co.il>
+Date: Tue, 1 Dec 2009 12:14:10 +0200
+Subject: [PATCH 1/6] OMAP: DSS2: add Toppoly TDO35S panel
+
+Signed-off-by: Mike Rapoport <mike@compulab.co.il>
+---
+ drivers/video/omap2/displays/Kconfig | 6 +
+ drivers/video/omap2/displays/Makefile | 1 +
+ .../video/omap2/displays/panel-toppoly-tdo35s.c | 112 ++++++++++++++++++++
+ 3 files changed, 119 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/video/omap2/displays/panel-toppoly-tdo35s.c
+
+diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
+index 79d2861..0d0d4f3 100644
+--- a/drivers/video/omap2/displays/Kconfig
++++ b/drivers/video/omap2/displays/Kconfig
+@@ -25,4 +25,10 @@ config PANEL_TAAL
+ help
+ Taal DSI command mode panel from TPO.
+
++config PANEL_TOPPOLY_TDO35S
++ tristate "Toppoly TDO35S LCD Panel support"
++ depends on OMAP2_DSS
++ help
++ LCD Panel used in CM-T35
++
+ endmenu
+diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
+index d44e765..e299454 100644
+--- a/drivers/video/omap2/displays/Makefile
++++ b/drivers/video/omap2/displays/Makefile
+@@ -3,3 +3,4 @@ obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o
+ obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+
+ obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
++obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
+\ No newline at end of file
+diff --git a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
+new file mode 100644
+index 0000000..e744b8c
+--- /dev/null
++++ b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
+@@ -0,0 +1,112 @@
++/*
++ * LCD panel driver for Toppoly TDO35S
++ *
++ * Copyright (C) 2009 CompuLab, Ltd.
++ * Author: Mike Rapoport <mike@compulab.co.il>
++ *
++ * Based on generic panel support
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++
++#include <plat/display.h>
++
++static struct omap_video_timings toppoly_tdo_panel_timings = {
++ /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
++ .x_res = 480,
++ .y_res = 640,
++
++ .pixel_clock = 26000,
++
++ .hfp = 104,
++ .hsw = 8,
++ .hbp = 8,
++
++ .vfp = 4,
++ .vsw = 2,
++ .vbp = 2,
++};
++
++static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev)
++{
++ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
++ OMAP_DSS_LCD_IHS;
++ dssdev->panel.timings = toppoly_tdo_panel_timings;
++
++ return 0;
++}
++
++static void toppoly_tdo_panel_remove(struct omap_dss_device *dssdev)
++{
++}
++
++static int toppoly_tdo_panel_enable(struct omap_dss_device *dssdev)
++{
++ int r = 0;
++
++ if (dssdev->platform_enable)
++ r = dssdev->platform_enable(dssdev);
++
++ return r;
++}
++
++static void toppoly_tdo_panel_disable(struct omap_dss_device *dssdev)
++{
++ if (dssdev->platform_disable)
++ dssdev->platform_disable(dssdev);
++}
++
++static int toppoly_tdo_panel_suspend(struct omap_dss_device *dssdev)
++{
++ toppoly_tdo_panel_disable(dssdev);
++ return 0;
++}
++
++static int toppoly_tdo_panel_resume(struct omap_dss_device *dssdev)
++{
++ return toppoly_tdo_panel_enable(dssdev);
++}
++
++static struct omap_dss_driver generic_driver = {
++ .probe = toppoly_tdo_panel_probe,
++ .remove = toppoly_tdo_panel_remove,
++
++ .enable = toppoly_tdo_panel_enable,
++ .disable = toppoly_tdo_panel_disable,
++ .suspend = toppoly_tdo_panel_suspend,
++ .resume = toppoly_tdo_panel_resume,
++
++ .driver = {
++ .name = "toppoly_tdo35s_panel",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init toppoly_tdo_panel_drv_init(void)
++{
++ return omap_dss_register_driver(&generic_driver);
++}
++
++static void __exit toppoly_tdo_panel_drv_exit(void)
++{
++ omap_dss_unregister_driver(&generic_driver);
++}
++
++module_init(toppoly_tdo_panel_drv_init);
++module_exit(toppoly_tdo_panel_drv_exit);
++MODULE_LICENSE("GPL");
+--
+1.6.4.4
+
diff --git a/recipes/linux/linux-omap-2.6.32/cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch b/recipes/linux/linux-omap-2.6.32/cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch
new file mode 100644
index 0000000..b540987
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.32/cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch
@@ -0,0 +1,30 @@
+From 8a2cbbaa60ea06370d2a6d9303b1aab54cdb8a69 Mon Sep 17 00:00:00 2001
+From: Mike Rapoport <mike@compulab.co.il>
+Date: Tue, 24 Nov 2009 10:09:35 +0200
+Subject: [PATCH] backlight: tdo24m: ensure chip select changes between transfers
+
+Some SPI host drivers do not change chip select betwen transfers unless
+.cs_chnage field is explicitly set. The LCD spec requires chip select
+change between consecuitive transfers, so ensure it at the SPI driver
+level.
+
+Signed-off-by: Mike Rapoport <mike@compulab.co.il>
+---
+ drivers/video/backlight/tdo24m.c | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c
+index bbfb502..4a3d46e 100644
+--- a/drivers/video/backlight/tdo24m.c
++++ b/drivers/video/backlight/tdo24m.c
+@@ -367,6 +367,7 @@ static int __devinit tdo24m_probe(struct spi_device *spi)
+
+ spi_message_init(m);
+
++ x->cs_change = 1;
+ x->tx_buf = &lcd->buf[0];
+ spi_message_add_tail(x, m);
+
+--
+1.6.4.4
+
diff --git a/recipes/linux/linux-omap-2.6.32/cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch b/recipes/linux/linux-omap-2.6.32/cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch
new file mode 100644
index 0000000..199e89b
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.32/cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch
@@ -0,0 +1,307 @@
+From 7d601fa33c5475bcd3035df797a3cbe40cc542d4 Mon Sep 17 00:00:00 2001
+From: Mike Rapoport <mike@compulab.co.il>
+Date: Tue, 1 Dec 2009 13:09:28 +0200
+Subject: [PATCH 2/6] omap3: cm-t35: add DSS2 display support
+
+Signed-off-by: Mike Rapoport <mike@compulab.co.il>
+---
+ arch/arm/mach-omap2/board-cm-t35.c | 234 +++++++++++++++++++++++++++++++++++-
+ 1 files changed, 233 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
+index 22c4529..2d7a819 100644
+--- a/arch/arm/mach-omap2/board-cm-t35.c
++++ b/arch/arm/mach-omap2/board-cm-t35.c
+@@ -32,6 +32,9 @@
+ #include <linux/i2c/twl4030.h>
+ #include <linux/regulator/machine.h>
+
++#include <linux/spi/spi.h>
++#include <linux/spi/tdo24m.h>
++
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+@@ -42,6 +45,7 @@
+ #include <plat/nand.h>
+ #include <plat/gpmc.h>
+ #include <plat/usb.h>
++#include <plat/display.h>
+
+ #include <mach/hardware.h>
+
+@@ -248,7 +252,6 @@ static inline void cm_t35_init_nand(void) {}
+
+ #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+-#include <linux/spi/spi.h>
+ #include <linux/spi/ads7846.h>
+
+ #include <plat/mcspi.h>
+@@ -304,6 +307,193 @@ static void __init cm_t35_init_ads7846(void)
+ static inline void cm_t35_init_ads7846(void) {}
+ #endif
+
++#define CM_T35_LCD_EN_GPIO 157
++#define CM_T35_LCD_BL_GPIO 58
++#define CM_T35_DVI_EN_GPIO 54
++
++static int lcd_bl_gpio;
++static int lcd_en_gpio;
++static int dvi_en_gpio;
++
++static int lcd_enabled;
++static int dvi_enabled;
++
++static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev)
++{
++ if (dvi_enabled) {
++ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
++ return -EINVAL;
++ }
++
++ gpio_set_value(lcd_en_gpio, 1);
++ gpio_set_value(lcd_bl_gpio, 1);
++
++ lcd_enabled = 1;
++
++ return 0;
++}
++
++static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
++{
++ lcd_enabled = 0;
++
++ gpio_set_value(lcd_bl_gpio, 0);
++ gpio_set_value(lcd_en_gpio, 0);
++}
++
++static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev)
++{
++ if (lcd_enabled) {
++ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
++ return -EINVAL;
++ }
++
++ gpio_set_value(dvi_en_gpio, 0);
++ dvi_enabled = 1;
++
++ return 0;
++}
++
++static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev)
++{
++ gpio_set_value(dvi_en_gpio, 1);
++ dvi_enabled = 0;
++}
++
++static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev)
++{
++ return 0;
++}
++
++static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
++{
++}
++
++static struct omap_dss_device cm_t35_lcd_device = {
++ .name = "lcd",
++ .driver_name = "toppoly_tdo35s_panel",
++ .type = OMAP_DISPLAY_TYPE_DPI,
++ .phy.dpi.data_lines = 18,
++ .platform_enable = cm_t35_panel_enable_lcd,
++ .platform_disable = cm_t35_panel_disable_lcd,
++};
++
++static struct omap_dss_device cm_t35_dvi_device = {
++ .name = "dvi",
++ .driver_name = "generic_panel",
++ .type = OMAP_DISPLAY_TYPE_DPI,
++ .phy.dpi.data_lines = 24,
++ .platform_enable = cm_t35_panel_enable_dvi,
++ .platform_disable = cm_t35_panel_disable_dvi,
++};
++
++static struct omap_dss_device cm_t35_tv_device = {
++ .name = "tv",
++ .driver_name = "venc",
++ .type = OMAP_DISPLAY_TYPE_VENC,
++ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
++ .platform_enable = cm_t35_panel_enable_tv,
++ .platform_disable = cm_t35_panel_disable_tv,
++};
++
++static struct omap_dss_device *cm_t35_dss_devices[] = {
++ &cm_t35_lcd_device,
++ &cm_t35_dvi_device,
++ &cm_t35_tv_device,
++};
++
++static struct omap_dss_board_info cm_t35_dss_data = {
++ .num_devices = ARRAY_SIZE(cm_t35_dss_devices),
++ .devices = cm_t35_dss_devices,
++ .default_device = &cm_t35_dvi_device,
++};
++
++static struct platform_device cm_t35_dss_device = {
++ .name = "omapdss",
++ .id = -1,
++ .dev = {
++ .platform_data = &cm_t35_dss_data,
++ },
++};
++
++static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
++ .turbo_mode = 0,
++ .single_channel = 1, /* 0: slave, 1: master */
++};
++
++static struct tdo24m_platform_data tdo24m_config = {
++ .model = TDO35S,
++};
++
++static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
++ {
++ .modalias = "tdo24m",
++ .bus_num = 4,
++ .chip_select = 0,
++ .max_speed_hz = 1000000,
++ .controller_data = &tdo24m_mcspi_config,
++ .platform_data = &tdo24m_config,
++ },
++};
++
++static void __init cm_t35_display_init(void)
++{
++ int err;
++
++ lcd_en_gpio = CM_T35_LCD_EN_GPIO;
++ lcd_bl_gpio = CM_T35_LCD_BL_GPIO;
++ dvi_en_gpio = CM_T35_DVI_EN_GPIO;
++
++ spi_register_board_info(cm_t35_lcd_spi_board_info,
++ ARRAY_SIZE(cm_t35_lcd_spi_board_info));
++
++ err = gpio_request(lcd_en_gpio, "LCD RST");
++ if (err) {
++ pr_err("CM-T35: failed to get LCD reset GPIO\n");
++ goto out;
++ }
++
++ err = gpio_request(lcd_bl_gpio, "LCD BL");
++ if (err) {
++ pr_err("CM-T35: failed to get LCD backlight control GPIO\n");
++ goto err_lcd_bl;
++ }
++
++ err = gpio_request(dvi_en_gpio, "DVI EN");
++ if (err) {
++ pr_err("CM-T35: failed to get DVI reset GPIO\n");
++ goto err_dvi_en;
++ }
++
++ gpio_export(lcd_en_gpio, 0);
++ gpio_export(lcd_bl_gpio, 0);
++ gpio_export(dvi_en_gpio, 0);
++ gpio_direction_output(lcd_en_gpio, 0);
++ gpio_direction_output(lcd_bl_gpio, 0);
++ gpio_direction_output(dvi_en_gpio, 1);
++
++ msleep(50);
++ gpio_set_value(lcd_en_gpio, 1);
++
++ err = platform_device_register(&cm_t35_dss_device);
++ if (err) {
++ pr_err("CM-T35: failed to register DSS device\n");
++ goto err_dev_reg;
++ }
++
++ return;
++
++err_dev_reg:
++ gpio_free(dvi_en_gpio);
++err_dvi_en:
++ gpio_free(lcd_bl_gpio);
++err_lcd_bl:
++ gpio_free(lcd_en_gpio);
++out:
++
++ return;
++}
++
+ static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
+ .supply = "vmmc",
+ };
+@@ -312,6 +502,16 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = {
+ .supply = "vmmc_aux",
+ };
+
++static struct regulator_consumer_supply cm_t35_vdac_supply = {
++ .supply = "vdda_dac",
++ .dev = &cm_t35_dss_device.dev,
++};
++
++static struct regulator_consumer_supply cm_t35_vdvi_supply = {
++ .supply = "vdvi",
++ .dev = &cm_t35_dss_device.dev,
++};
++
+ /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+ static struct regulator_init_data cm_t35_vmmc1 = {
+ .constraints = {
+@@ -342,6 +542,35 @@ static struct regulator_init_data cm_t35_vsim = {
+ .consumer_supplies = &cm_t35_vsim_supply,
+ };
+
++/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
++static struct regulator_init_data cm_t35_vdac = {
++ .constraints = {
++ .min_uV = 1800000,
++ .max_uV = 1800000,
++ .valid_modes_mask = REGULATOR_MODE_NORMAL
++ | REGULATOR_MODE_STANDBY,
++ .valid_ops_mask = REGULATOR_CHANGE_MODE
++ | REGULATOR_CHANGE_STATUS,
++ },
++ .num_consumer_supplies = 1,
++ .consumer_supplies = &cm_t35_vdac_supply,
++};
++
++/* VPLL2 for digital video outputs */
++static struct regulator_init_data cm_t35_vpll2 = {
++ .constraints = {
++ .name = "VDVI",
++ .min_uV = 1800000,
++ .max_uV = 1800000,
++ .valid_modes_mask = REGULATOR_MODE_NORMAL
++ | REGULATOR_MODE_STANDBY,
++ .valid_ops_mask = REGULATOR_CHANGE_MODE
++ | REGULATOR_CHANGE_STATUS,
++ },
++ .num_consumer_supplies = 1,
++ .consumer_supplies = &cm_t35_vdvi_supply,
++};
++
+ static struct twl4030_usb_data cm_t35_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+ };
+@@ -445,6 +674,8 @@ static struct twl4030_platform_data cm_t35_twldata = {
+ .gpio = &cm_t35_gpio_data,
+ .vmmc1 = &cm_t35_vmmc1,
+ .vsim = &cm_t35_vsim,
++ .vdac = &cm_t35_vdac,
++ .vpll2 = &cm_t35_vpll2,
+ };
+
+ static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = {
+@@ -490,6 +721,7 @@ static void __init cm_t35_init(void)
+ cm_t35_init_ads7846();
+ cm_t35_init_ethernet();
+ cm_t35_init_led();
++ cm_t35_display_init();
+
+ usb_musb_init();
+
+--
+1.6.4.4
+
diff --git a/recipes/linux/linux-omap-2.6.32/cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch b/recipes/linux/linux-omap-2.6.32/cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch
new file mode 100644
index 0000000..dc1e527
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.32/cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch
@@ -0,0 +1,145 @@
+From 10cd78db62cbda2f9db1c53d459ee03a35b84662 Mon Sep 17 00:00:00 2001
+From: Mike Rapoport <mike@compulab.co.il>
+Date: Tue, 1 Dec 2009 13:16:02 +0200
+Subject: [PATCH 3/6] omap3: cm-t35: update defconfig for DSS2
+
+Signed-off-by: Mike Rapoport <mike@compulab.co.il>
+---
+ arch/arm/configs/cm_t35_defconfig | 82 +++++++++++++++++++++++++++++++++++--
+ 1 files changed, 78 insertions(+), 4 deletions(-)
+
+diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig
+index e42c5c8..bd6f882 100644
+--- a/arch/arm/configs/cm_t35_defconfig
++++ b/arch/arm/configs/cm_t35_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.32-rc4
+-# Tue Oct 13 17:10:40 2009
++# Linux kernel version: 2.6.32-rc8
++# Tue Dec 1 12:08:44 2009
+ #
+ CONFIG_ARM=y
+ CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+@@ -215,6 +215,7 @@ CONFIG_OMAP_DM_TIMER=y
+ # CONFIG_OMAP_LL_DEBUG_UART1 is not set
+ # CONFIG_OMAP_LL_DEBUG_UART2 is not set
+ CONFIG_OMAP_LL_DEBUG_UART3=y
++# CONFIG_OMAP_LL_DEBUG_NONE is not set
+ # CONFIG_OMAP_PM_NONE is not set
+ CONFIG_OMAP_PM_NOOP=y
+ CONFIG_ARCH_OMAP34XX=y
+@@ -227,11 +228,15 @@ CONFIG_ARCH_OMAP3430=y
+ # CONFIG_MACH_OMAP_LDP is not set
+ # CONFIG_MACH_OVERO is not set
+ # CONFIG_MACH_OMAP3EVM is not set
++# CONFIG_MACH_OMAP3517EVM is not set
+ # CONFIG_MACH_OMAP3_PANDORA is not set
+ # CONFIG_MACH_OMAP_3430SDP is not set
+ # CONFIG_MACH_NOKIA_RX51 is not set
+ # CONFIG_MACH_OMAP_ZOOM2 is not set
++# CONFIG_MACH_OMAP_ZOOM3 is not set
+ CONFIG_MACH_CM_T35=y
++# CONFIG_MACH_IGEP0020 is not set
++# CONFIG_MACH_OMAP_3630SDP is not set
+
+ #
+ # Processor Type
+@@ -963,6 +968,7 @@ CONFIG_SSB_POSSIBLE=y
+ # CONFIG_TPS65010 is not set
+ CONFIG_TWL4030_CORE=y
+ # CONFIG_TWL4030_POWER is not set
++# CONFIG_TWL4030_CODEC is not set
+ # CONFIG_MFD_TMIO is not set
+ # CONFIG_MFD_T7L66XB is not set
+ # CONFIG_MFD_TC6387XB is not set
+@@ -993,8 +999,66 @@ CONFIG_REGULATOR_TWL4030=y
+ #
+ # CONFIG_VGASTATE is not set
+ # CONFIG_VIDEO_OUTPUT_CONTROL is not set
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
++# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
++CONFIG_OMAP2_VRAM=y
++CONFIG_OMAP2_VRFB=y
++CONFIG_OMAP2_DSS=y
++CONFIG_OMAP2_VRAM_SIZE=4
++CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
++# CONFIG_OMAP2_DSS_RFBI is not set
++CONFIG_OMAP2_DSS_VENC=y
++# CONFIG_OMAP2_DSS_SDI is not set
++# CONFIG_OMAP2_DSS_DSI is not set
++# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
++CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
++CONFIG_FB_OMAP2=y
++CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
++# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
++CONFIG_FB_OMAP2_NUM_FBS=3
++
++#
++# OMAP2/3 Display Device Drivers
++#
++CONFIG_PANEL_GENERIC=y
++# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
++# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
++CONFIG_PANEL_TOPPOLY_TDO35S=y
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++# CONFIG_LCD_LMS283GF05 is not set
++# CONFIG_LCD_LTV350QV is not set
++# CONFIG_LCD_ILI9320 is not set
++CONFIG_LCD_TDO24M=y
++# CONFIG_LCD_VGG2432A4 is not set
++# CONFIG_LCD_PLATFORM is not set
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+ #
+ # Display device support
+@@ -1006,6 +1070,16 @@ CONFIG_REGULATOR_TWL4030=y
+ #
+ # CONFIG_VGA_CONSOLE is not set
+ CONFIG_DUMMY_CONSOLE=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
++# CONFIG_FONTS is not set
++CONFIG_FONT_8x8=y
++CONFIG_FONT_8x16=y
++CONFIG_LOGO=y
++CONFIG_LOGO_LINUX_MONO=y
++CONFIG_LOGO_LINUX_VGA16=y
++CONFIG_LOGO_LINUX_CLUT224=y
+ # CONFIG_SOUND is not set
+ CONFIG_HID_SUPPORT=y
+ CONFIG_HID=y
+--
+1.6.4.4
+
diff --git a/recipes/linux/linux-omap-2.6.32/cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch b/recipes/linux/linux-omap-2.6.32/cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch
new file mode 100644
index 0000000..ff8b50b
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.32/cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch
@@ -0,0 +1,427 @@
+From a1a572a6b020996155fa3fd7e70a96299b37cf30 Mon Sep 17 00:00:00 2001
+From: Mike Rapoport <mike@compulab.co.il>
+Date: Mon, 7 Dec 2009 10:27:48 +0200
+Subject: [PATCH 4/6] omap3: cm-t35: add cm-t35 mux configs
+
+Signed-off-by: Mike Rapoport <mike@compulab.co.il>
+---
+ arch/arm/mach-omap2/board-cm-t35.c | 94 +++++++++++++++++++
+ arch/arm/mach-omap2/mux.c | 158 ++++++++++++++++++++++++++++++++-
+ arch/arm/plat-omap/include/plat/mux.h | 86 ++++++++++++++++++
+ 3 files changed, 337 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
+index 2d7a819..3e54499 100644
+--- a/arch/arm/mach-omap2/board-cm-t35.c
++++ b/arch/arm/mach-omap2/board-cm-t35.c
+@@ -693,6 +693,99 @@ static void __init cm_t35_init_i2c(void)
+ ARRAY_SIZE(cm_t35_i2c_boardinfo));
+ }
+
++static void __init cm_t35_init_mux(void)
++{
++ /* nCS and IRQ mux for CM-T35 ethernet */
++ omap_cfg_reg(G5_34XX_GPMC_NCS5);
++ omap_cfg_reg(A23_34XX_GPIO163_UP);
++
++ /* nCS, IRQ and reset mux for SB-T35 ethernet */
++ omap_cfg_reg(F4_34XX_GPMC_NCS4);
++ omap_cfg_reg(N21_34XX_GPIO127_UP);
++ omap_cfg_reg(B23_34XX_GPIO164_OUT);
++
++ /* PENDOWN GPIO */
++ omap_cfg_reg(F3_34XX_GPIO57_UP);
++
++ /* mUSB */
++ omap_cfg_reg(R21_3430_USB0HS_PHY_CLK);
++ omap_cfg_reg(R23_3430_USB0HS_PHY_STP);
++ omap_cfg_reg(P23_3430_USB0HS_PHY_DIR);
++ omap_cfg_reg(R22_3430_USB0HS_PHY_NXT);
++ omap_cfg_reg(T24_3430_USB0HS_PHY_DATA0);
++ omap_cfg_reg(T23_3430_USB0HS_PHY_DATA1);
++ omap_cfg_reg(U24_3430_USB0HS_PHY_DATA2);
++ omap_cfg_reg(U23_3430_USB0HS_PHY_DATA3);
++ omap_cfg_reg(W24_3430_USB0HS_PHY_DATA4);
++ omap_cfg_reg(V23_3430_USB0HS_PHY_DATA5);
++ omap_cfg_reg(W23_3430_USB0HS_PHY_DATA6);
++ omap_cfg_reg(T22_3430_USB0HS_PHY_DATA7);
++
++ /* MMC 2 */
++ omap_cfg_reg(AB2_3430_MMC2_DIR_DAT0);
++ omap_cfg_reg(AA2_3430_MMC2_DIR_DAT1);
++ omap_cfg_reg(Y2_3430_MMC2_DIR_CMD);
++ omap_cfg_reg(AA1_3420_MMC2_CLKIN);
++
++ /* McSPI 1 */
++ omap_cfg_reg(T5_34XX_MCSPI1_CLK);
++ omap_cfg_reg(R4_34XX_MCSPI1_SIMO);
++ omap_cfg_reg(T4_34XX_MCSPI1_SOMI);
++ omap_cfg_reg(T6_34XX_MCSPI1_CS0);
++
++ /* McBSP 2 */
++ omap_cfg_reg(V20_34XX_MCBSP2_FSX);
++ omap_cfg_reg(T21_34XX_MCBSP2_CLKX);
++ omap_cfg_reg(V19_34XX_MCBSP2_DR);
++ omap_cfg_reg(R20_34XX_MCBSP2_DX);
++
++ omap_cfg_reg(F21_34XX_GPIO109_OUT);
++
++ /* serial ports */
++ omap_cfg_reg(W4_34XX_UART2_TX);
++ omap_cfg_reg(V4_34XX_UART2_RX);
++ omap_cfg_reg(W7_34XX_UART1_TX);
++ omap_cfg_reg(V7_34XX_UART1_RX);
++
++ /* display controls */
++ omap_cfg_reg(U8_34XX_GPIO54_OUT);
++ omap_cfg_reg(G4_34XX_GPIO58_OUT);
++/* omap_cfg_reg(??_34XX_GPIO129_OUT); */
++
++ /* DSS */
++ omap_cfg_reg(G22_34XX_DSS_PCLK);
++ omap_cfg_reg(E22_34XX_DSS_HSYNC);
++ omap_cfg_reg(F22_34XX_DSS_VSYNC);
++ omap_cfg_reg(J21_34XX_DSS_ACBIAS);
++ omap_cfg_reg(AC19_34XX_DSS_DATA0);
++ omap_cfg_reg(AB19_34XX_DSS_DATA1);
++ omap_cfg_reg(AD20_34XX_DSS_DATA2);
++ omap_cfg_reg(AC20_34XX_DSS_DATA3);
++ omap_cfg_reg(AD21_34XX_DSS_DATA4);
++ omap_cfg_reg(AC21_34XX_DSS_DATA5);
++ omap_cfg_reg(D24_34XX_DSS_DATA6);
++ omap_cfg_reg(E23_34XX_DSS_DATA7);
++ omap_cfg_reg(E24_34XX_DSS_DATA8);
++ omap_cfg_reg(F23_34XX_DSS_DATA9);
++ omap_cfg_reg(AC22_34XX_DSS_DATA10);
++ omap_cfg_reg(AC23_34XX_DSS_DATA11);
++ omap_cfg_reg(AB22_34XX_DSS_DATA12);
++ omap_cfg_reg(Y22_34XX_DSS_DATA13);
++ omap_cfg_reg(W22_34XX_DSS_DATA14);
++ omap_cfg_reg(V22_34XX_DSS_DATA15);
++ omap_cfg_reg(J22_34XX_DSS_DATA16);
++ omap_cfg_reg(G23_34XX_DSS_DATA17);
++ omap_cfg_reg(G24_34XX_DSS_DATA18);
++ omap_cfg_reg(H23_34XX_DSS_DATA19);
++ omap_cfg_reg(D23_34XX_DSS_DATA20);
++ omap_cfg_reg(K22_34XX_DSS_DATA21);
++ omap_cfg_reg(V21_34XX_DSS_DATA22);
++ omap_cfg_reg(W21_34XX_DSS_DATA23);
++
++ /* TPS IRQ */
++ omap_cfg_reg(AF26_34XX_SYS_NIRQ);
++}
++
+ static struct omap_board_config_kernel cm_t35_config[] __initdata = {
+ };
+
+@@ -716,6 +809,7 @@ static void __init cm_t35_map_io(void)
+ static void __init cm_t35_init(void)
+ {
+ omap_serial_init();
++ cm_t35_init_mux();
+ cm_t35_init_i2c();
+ cm_t35_init_nand();
+ cm_t35_init_ads7846();
+diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
+index c18a94e..23eb011 100644
+--- a/arch/arm/mach-omap2/mux.c
++++ b/arch/arm/mach-omap2/mux.c
+@@ -279,6 +279,33 @@ MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00,
+ MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
++/* HSUSB Port 0 */
++MUX_CFG_34XX("R21_3430_USB0HS_PHY_CLK", 0x1a2,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("R23_3430_USB0HS_PHY_STP", 0x1a4,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT | \
++ OMAP2_PULL_ENA | OMAP2_PULL_UP)
++MUX_CFG_34XX("P23_3430_USB0HS_PHY_DIR", 0x1a6,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("R22_3430_USB0HS_PHY_NXT", 0x1a8,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("T24_3430_USB0HS_PHY_DATA0", 0x1aa,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("T23_3430_USB0HS_PHY_DATA1", 0x1ac,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("U24_3430_USB0HS_PHY_DATA2", 0x1ae,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("U23_3430_USB0HS_PHY_DATA3", 0x1b0,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("W24_3430_USB0HS_PHY_DATA4", 0x1b2,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("V23_3430_USB0HS_PHY_DATA5", 0x1b4,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("W23_3430_USB0HS_PHY_DATA6", 0x1b6,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("T22_3430_USB0HS_PHY_DATA7", 0x1b8,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++
+ /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
+ MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+@@ -541,6 +568,15 @@ MUX_CFG_34XX("AF3_3430_MMC2_DAT6", 0x168,
+ MUX_CFG_34XX("AE3_3430_MMC2_DAT7", 0x16A,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
++MUX_CFG_34XX("AB2_3430_MMC2_DIR_DAT0", 0x164,
++ OMAP34XX_MUX_MODE1 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("AA2_3430_MMC2_DIR_DAT1", 0x166,
++ OMAP34XX_MUX_MODE1 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("Y2_3430_MMC2_DIR_CMD", 0x168,
++ OMAP34XX_MUX_MODE1 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("AA1_3420_MMC2_CLKIN", 0x16a,
++ OMAP34XX_MUX_MODE1 | OMAP34XX_PIN_INPUT)
++
+ /* MMC3 */
+ MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+@@ -559,13 +595,133 @@ MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
+ MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
+ OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
+ OMAP34XX_MUX_MODE0)
+-/* EHCI GPIO's on OMAP3EVM (Rev >= E) */
++
+ MUX_CFG_34XX("AH14_34XX_GPIO21", 0x5ea,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
+ MUX_CFG_34XX("AF9_34XX_GPIO22", 0x5ec,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
+ MUX_CFG_34XX("U3_34XX_GPIO61", 0x0c8,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
++
++MUX_CFG_34XX("AG4_34XX_GPIO134", 0x160,
++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("U8_34XX_GPIO54", 0x0b4,
++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("AE4_34XX_GPIO136", 0x164,
++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("F3_34XX_GPIO57_UP", 0x0ba,
++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
++MUX_CFG_34XX("G4_34XX_GPIO58_OUT", 0x0bc,
++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("W2_34XX_GPIO59", 0x0be,
++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("L1_34XX_GPIO61_OUT", 0x0c8,
++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("C2_34XX_GPIO65", 0x0d2,
++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("N21_34XX_GPIO127_UP", 0x152,
++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
++MUX_CFG_34XX("A23_34XX_GPIO163_UP", 0x19a,
++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
++MUX_CFG_34XX("B23_34XX_GPIO164_OUT", 0x19c,
++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("AA6_34XX_GPIO164_OUT", 0x1e2,
++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
++
++/* GPMC */
++MUX_CFG_34XX("F4_34XX_GPMC_NCS4", 0x0b6, OMAP34XX_MUX_MODE0)
++MUX_CFG_34XX("G5_34XX_GPMC_NCS5", 0x0b8, OMAP34XX_MUX_MODE0)
++
++/* McSPI 1 */
++MUX_CFG_34XX("T5_34XX_MCSPI1_CLK", 0x1c8,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("R4_34XX_MCSPI1_SIMO", 0x1ca,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("T4_34XX_MCSPI1_SOMI", 0x1cc,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("T6_34XX_MCSPI1_CS0", 0x1ce,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLDOWN)
++
++/* McBSP 2 */
++MUX_CFG_34XX("V20_34XX_MCBSP2_FSX", 0x13c,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("T21_34XX_MCBSP2_CLKX", 0x13e,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("V19_34XX_MCBSP2_DR", 0x140,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("R20_34XX_MCBSP2_DX", 0x142,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++
++MUX_CFG_34XX("F21_34XX_GPIO109_OUT", 0x12a,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++
++/* Serial ports */
++MUX_CFG_34XX("W4_34XX_UART2_TX", 0x170,
++ OMAP34XX_MUX_MODE1 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("V4_34XX_UART2_RX", 0x172,
++ OMAP34XX_MUX_MODE1 | OMAP34XX_PIN_INPUT)
++MUX_CFG_34XX("W7_34XX_UART1_TX", 0x17c,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("V7_34XX_UART1_RX", 0x182,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT)
++
++/* DSS */
++MUX_CFG_34XX("G22_34XX_DSS_PCLK", 0x0d4,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("E22_34XX_DSS_HSYNC", 0x0d6,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("F22_34XX_DSS_VSYNC", 0x0d8,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("J21_34XX_DSS_ACBIAS", 0x0da,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("AC19_34XX_DSS_DATA0", 0x0dc,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("AB19_34XX_DSS_DATA1", 0x0de,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("AD20_34XX_DSS_DATA2", 0x0e0,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("AC20_34XX_DSS_DATA3", 0x0e2,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("AD21_34XX_DSS_DATA4", 0x0e4,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("AC21_34XX_DSS_DATA5", 0x0e6,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("D24_34XX_DSS_DATA6", 0x0e8,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("E23_34XX_DSS_DATA7", 0x0ea,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("E24_34XX_DSS_DATA8", 0x0ec,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("F23_34XX_DSS_DATA9", 0x0ee,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("AC22_34XX_DSS_DATA10", 0x0f0,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("AC23_34XX_DSS_DATA11", 0x0f2,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("AB22_34XX_DSS_DATA12", 0x0f4,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("Y22_34XX_DSS_DATA13", 0x0f6,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("W22_34XX_DSS_DATA14", 0x0f8,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("V22_34XX_DSS_DATA15", 0x0fa,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("J22_34XX_DSS_DATA16", 0x0fc,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("G23_34XX_DSS_DATA17", 0x0fe,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("G24_34XX_DSS_DATA18", 0x100,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("H23_34XX_DSS_DATA19", 0x102,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("D23_34XX_DSS_DATA20", 0x104,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("K22_34XX_DSS_DATA21", 0x106,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("V21_34XX_DSS_DATA22", 0x108,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
++MUX_CFG_34XX("W21_34XX_DSS_DATA23", 0x10a,
++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
+ };
+
+ #define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
+diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
+index ba77de6..119379c 100644
+--- a/arch/arm/plat-omap/include/plat/mux.h
++++ b/arch/arm/plat-omap/include/plat/mux.h
+@@ -692,6 +692,20 @@ enum omap34xx_index {
+ AD26_34XX_I2C4_SCL,
+ AE26_34XX_I2C4_SDA,
+
++ /* HSUSB Port 0 */
++ R21_3430_USB0HS_PHY_CLK,
++ R23_3430_USB0HS_PHY_STP,
++ P23_3430_USB0HS_PHY_DIR,
++ R22_3430_USB0HS_PHY_NXT,
++ T24_3430_USB0HS_PHY_DATA0,
++ T23_3430_USB0HS_PHY_DATA1,
++ U24_3430_USB0HS_PHY_DATA2,
++ U23_3430_USB0HS_PHY_DATA3,
++ W24_3430_USB0HS_PHY_DATA4,
++ V23_3430_USB0HS_PHY_DATA5,
++ W23_3430_USB0HS_PHY_DATA6,
++ T22_3430_USB0HS_PHY_DATA7,
++
+ /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
+ Y8_3430_USB1HS_PHY_CLK,
+ Y9_3430_USB1HS_PHY_STP,
+@@ -839,6 +853,11 @@ enum omap34xx_index {
+ AF3_3430_MMC2_DAT6,
+ AE3_3430_MMC2_DAT7,
+
++ AB2_3430_MMC2_DIR_DAT0,
++ AA2_3430_MMC2_DIR_DAT1,
++ Y2_3430_MMC2_DIR_CMD,
++ AA1_3420_MMC2_CLKIN,
++
+ /* MMC3 */
+ AF10_3430_MMC3_CLK,
+ AC3_3430_MMC3_CMD,
+@@ -854,6 +873,73 @@ enum omap34xx_index {
+ AH14_34XX_GPIO21,
+ AF9_34XX_GPIO22,
+ U3_34XX_GPIO61,
++
++ AG4_34XX_GPIO134,
++ U8_34XX_GPIO54,
++ AE4_34XX_GPIO136,
++ F3_34XX_GPIO57_UP,
++ G4_34XX_GPIO58_OUT,
++ W2_34XX_GPIO59,
++ L1_34XX_GPIO61_OUT,
++ C2_34XX_GPIO65,
++ N21_34XX_GPIO127_UP,
++ A23_34XX_GPIO163_UP,
++ B23_34XX_GPIO164_OUT,
++ AA6_34XX_GPIO186_OUT,
++
++ /* gpmc */
++ F4_34XX_GPMC_NCS4,
++ G5_34XX_GPMC_NCS5,
++
++ /* McSPI 1 */
++ T5_34XX_MCSPI1_CLK,
++ R4_34XX_MCSPI1_SIMO,
++ T4_34XX_MCSPI1_SOMI,
++ T6_34XX_MCSPI1_CS0,
++
++ /* McBSP 2 */
++ V20_34XX_MCBSP2_FSX,
++ T21_34XX_MCBSP2_CLKX,
++ V19_34XX_MCBSP2_DR,
++ R20_34XX_MCBSP2_DX,
++
++ F21_34XX_GPIO109_OUT,
++
++ /* serial ports */
++ W4_34XX_UART2_TX,
++ V4_34XX_UART2_RX,
++ W7_34XX_UART1_TX,
++ V7_34XX_UART1_RX,
++
++ /* DSS */
++ G22_34XX_DSS_PCLK,
++ E22_34XX_DSS_HSYNC,
++ F22_34XX_DSS_VSYNC,
++ J21_34XX_DSS_ACBIAS,
++ AC19_34XX_DSS_DATA0,
++ AB19_34XX_DSS_DATA1,
++ AD20_34XX_DSS_DATA2,
++ AC20_34XX_DSS_DATA3,
++ AD21_34XX_DSS_DATA4,
++ AC21_34XX_DSS_DATA5,
++ D24_34XX_DSS_DATA6,
++ E23_34XX_DSS_DATA7,
++ E24_34XX_DSS_DATA8,
++ F23_34XX_DSS_DATA9,
++ AC22_34XX_DSS_DATA10,
++ AC23_34XX_DSS_DATA11,
++ AB22_34XX_DSS_DATA12,
++ Y22_34XX_DSS_DATA13,
++ W22_34XX_DSS_DATA14,
++ V22_34XX_DSS_DATA15,
++ J22_34XX_DSS_DATA16,
++ G23_34XX_DSS_DATA17,
++ G24_34XX_DSS_DATA18,
++ H23_34XX_DSS_DATA19,
++ D23_34XX_DSS_DATA20,
++ K22_34XX_DSS_DATA21,
++ V21_34XX_DSS_DATA22,
++ W21_34XX_DSS_DATA23,
+ };
+
+ struct omap_mux_cfg {
+--
+1.6.4.4
+
diff --git a/recipes/linux/linux-omap-2.6.32/cm-t35/0006-omap3-cm-t35-update-defconfig.patch b/recipes/linux/linux-omap-2.6.32/cm-t35/0006-omap3-cm-t35-update-defconfig.patch
new file mode 100644
index 0000000..a9034f0
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.32/cm-t35/0006-omap3-cm-t35-update-defconfig.patch
@@ -0,0 +1,87 @@
+From 88f7dc4c115c57b12de7ab4170bdaaeba145283b Mon Sep 17 00:00:00 2001
+From: Mike Rapoport <mike@compulab.co.il>
+Date: Mon, 7 Dec 2009 11:07:55 +0200
+Subject: [PATCH 6/6] omap3: cm-t35: update defconfig
+
+Signed-off-by: Mike Rapoport <mike@compulab.co.il>
+---
+ arch/arm/configs/cm_t35_defconfig | 28 ++++++++++++++++++++++------
+ 1 files changed, 22 insertions(+), 6 deletions(-)
+
+diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig
+index bd6f882..78eeb66 100644
+--- a/arch/arm/configs/cm_t35_defconfig
++++ b/arch/arm/configs/cm_t35_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.32-rc8
+-# Tue Dec 1 12:08:44 2009
++# Linux kernel version: 2.6.32
++# Mon Dec 7 10:43:46 2009
+ #
+ CONFIG_ARM=y
+ CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+@@ -572,7 +572,15 @@ CONFIG_MTD_NAND_IDS=y
+ #
+ # UBI - Unsorted block images
+ #
+-# CONFIG_MTD_UBI is not set
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++
++#
++# UBI debugging options
++#
++# CONFIG_MTD_UBI_DEBUG is not set
+ # CONFIG_PARPORT is not set
+ CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+@@ -1506,6 +1514,12 @@ CONFIG_JFFS2_RTIME=y
+ CONFIG_JFFS2_CMODE_PRIORITY=y
+ # CONFIG_JFFS2_CMODE_SIZE is not set
+ # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
++CONFIG_UBIFS_FS=y
++# CONFIG_UBIFS_FS_XATTR is not set
++# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
++CONFIG_UBIFS_FS_LZO=y
++CONFIG_UBIFS_FS_ZLIB=y
++# CONFIG_UBIFS_FS_DEBUG is not set
+ # CONFIG_CRAMFS is not set
+ # CONFIG_SQUASHFS is not set
+ # CONFIG_VXFS_FS is not set
+@@ -1775,9 +1789,9 @@ CONFIG_CRYPTO_DES=y
+ #
+ # Compression
+ #
+-# CONFIG_CRYPTO_DEFLATE is not set
++CONFIG_CRYPTO_DEFLATE=y
+ # CONFIG_CRYPTO_ZLIB is not set
+-# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_LZO=y
+
+ #
+ # Random Number Generation
+@@ -1792,7 +1806,7 @@ CONFIG_CRYPTO_HW=y
+ CONFIG_BITREVERSE=y
+ CONFIG_GENERIC_FIND_LAST_BIT=y
+ CONFIG_CRC_CCITT=y
+-# CONFIG_CRC16 is not set
++CONFIG_CRC16=y
+ # CONFIG_CRC_T10DIF is not set
+ # CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
+@@ -1800,6 +1814,8 @@ CONFIG_CRC32=y
+ CONFIG_LIBCRC32C=y
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_COMPRESS=y
++CONFIG_LZO_DECOMPRESS=y
+ CONFIG_DECOMPRESS_GZIP=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
+--
+1.6.4.4
+
diff --git a/recipes/linux/linux-omap-2.6.32/cm-t35/defconfig b/recipes/linux/linux-omap-2.6.32/cm-t35/defconfig
new file mode 100644
index 0000000..78eeb66
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.32/cm-t35/defconfig
@@ -0,0 +1,1823 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Mon Dec 7 10:43:46 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+CONFIG_MACH_CM_T35=y
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=m
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=4
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+CONFIG_PANEL_TOPPOLY_TDO35S=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes/linux/linux-omap_2.6.32.bb b/recipes/linux/linux-omap_2.6.32.bb
index 95692c0..a984612 100644
--- a/recipes/linux/linux-omap_2.6.32.bb
+++ b/recipes/linux/linux-omap_2.6.32.bb
@@ -3,9 +3,10 @@ require linux.inc
DESCRIPTION = "Linux kernel for OMAP processors"
KERNEL_IMAGETYPE = "uImage"
-COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|omap3evm|omap3-pandora|overo|omapzoom|omapzoom2|omap4430-sdp"
+COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|omap3evm|omap3-pandora|overo|omapzoom|omapzoom2|omap4430-sdp|cm-t35"
DEFAULT_PREFERENCE = "-1"
+DEFAULT_PREFERENCE_cm-t35 = "1"
SRCREV = "89c9eaeb92c97348dcabd6cb377b646c00855f6a"
@@ -18,6 +19,12 @@ SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.g
SRC_URI_append = " \
file://usb/ehci.patch;patch=1 \
file://usb/ehci-omap.c-mach-to-plat.diff;patch=1 \
+file://cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch;patch=1 \
+file://cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch;patch=1 \
+file://cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch;patch=1 \
+file://cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch;patch=1 \
+file://cm-t35/0006-omap3-cm-t35-update-defconfig.patch;patch=1 \
+file://cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch;patch=1 \
"
SRC_URI_append_beagleboard = " file://logo_linux_clut224.ppm \
--
1.6.4.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/5] cm-t35: add machine configuration
2009-12-09 7:13 [PATCH 0/5 v2] Add CM-T35 support Mike Rapoport
2009-12-09 7:13 ` [PATCH 1/5] u-boot git: add cm-t35 support Mike Rapoport
2009-12-09 7:13 ` [PATCH 2/5] linux-omap 2.6.32: " Mike Rapoport
@ 2009-12-09 7:13 ` Mike Rapoport
2009-12-09 7:13 ` [PATCH 4/5] angstrom-led-config: Add LED setup for the cm-t35 and bump PR Mike Rapoport
2009-12-09 7:13 ` [PATCH 5/5] xserver-xorg-conf: add cm-t35 support Mike Rapoport
4 siblings, 0 replies; 6+ messages in thread
From: Mike Rapoport @ 2009-12-09 7:13 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
---
conf/machine/cm-t35.conf | 46 ++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 46 insertions(+), 0 deletions(-)
create mode 100644 conf/machine/cm-t35.conf
diff --git a/conf/machine/cm-t35.conf b/conf/machine/cm-t35.conf
new file mode 100644
index 0000000..ccb9f95
--- /dev/null
+++ b/conf/machine/cm-t35.conf
@@ -0,0 +1,46 @@
+#@TYPE: Machine
+#@NAME: CM-T35 machine
+#@DESCRIPTION: Machine configuration for the CompuLab CM-T35 board (http://www.compulab.co.il/t3530/html/t3530-cm-datasheet.htm)
+
+TARGET_ARCH = "arm"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+XSERVER = "xserver-xorg \
+ xf86-input-evdev \
+ xf86-input-mouse \
+ xf86-input-evtouch \
+ xf86-input-tslib \
+ xf86-video-omapfb \
+ xf86-input-keyboard"
+
+GUI_MACHINE_CLASS = "bigscreen"
+
+require conf/machine/include/omap3.inc
+
+IMAGE_FSTYPES += "tar.bz2 ubi"
+EXTRA_IMAGECMD_jffs2 = "-lnp "
+
+# Guesswork
+SERIAL_CONSOLE = "115200 ttyS2"
+
+UBOOT_MACHINE = "cm_t35_config"
+PREFERRED_VERSION_u-boot = "git"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit: 2048
+# UBI: logical eraseblock size: 126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 4039 LEBs
+MKUBIFS_ARGS = "-m 2048 -e 126976 -c 4039"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit: 2048
+# UBI: physical eraseblock size: 131072 bytes (128 KiB)
+# UBI: sub-page size: 512
+UBINIZE_ARGS = "-O 2048 -m 2048 -p 128KiB"
+
+MACHINE_EXTRA_RRECOMMENDS = "marvell-sdio-fw"
+MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa wifi ext2"
+
--
1.6.4.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 4/5] angstrom-led-config: Add LED setup for the cm-t35 and bump PR.
2009-12-09 7:13 [PATCH 0/5 v2] Add CM-T35 support Mike Rapoport
` (2 preceding siblings ...)
2009-12-09 7:13 ` [PATCH 3/5] cm-t35: add machine configuration Mike Rapoport
@ 2009-12-09 7:13 ` Mike Rapoport
2009-12-09 7:13 ` [PATCH 5/5] xserver-xorg-conf: add cm-t35 support Mike Rapoport
4 siblings, 0 replies; 6+ messages in thread
From: Mike Rapoport @ 2009-12-09 7:13 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
---
recipes/angstrom/angstrom-led-config.bb | 2 +-
recipes/angstrom/angstrom-led-config/cm-t35/leds | 2 ++
2 files changed, 3 insertions(+), 1 deletions(-)
create mode 100644 recipes/angstrom/angstrom-led-config/cm-t35/leds
diff --git a/recipes/angstrom/angstrom-led-config.bb b/recipes/angstrom/angstrom-led-config.bb
index 2dbfd01..a0373ed 100644
--- a/recipes/angstrom/angstrom-led-config.bb
+++ b/recipes/angstrom/angstrom-led-config.bb
@@ -1,7 +1,7 @@
DESCRIPTION = "Configuration files for runtime LED configuration"
#PV = "${DISTRO_VERSION}"
-PR = "r6"
+PR = "r7"
PACKAGE_ARCH = "${MACHINE_ARCH}"
inherit update-rc.d
diff --git a/recipes/angstrom/angstrom-led-config/cm-t35/leds b/recipes/angstrom/angstrom-led-config/cm-t35/leds
new file mode 100644
index 0000000..4d24396
--- /dev/null
+++ b/recipes/angstrom/angstrom-led-config/cm-t35/leds
@@ -0,0 +1,2 @@
+#file format: name trigger
+cm-t35:green heartbeat
--
1.6.4.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 5/5] xserver-xorg-conf: add cm-t35 support
2009-12-09 7:13 [PATCH 0/5 v2] Add CM-T35 support Mike Rapoport
` (3 preceding siblings ...)
2009-12-09 7:13 ` [PATCH 4/5] angstrom-led-config: Add LED setup for the cm-t35 and bump PR Mike Rapoport
@ 2009-12-09 7:13 ` Mike Rapoport
4 siblings, 0 replies; 6+ messages in thread
From: Mike Rapoport @ 2009-12-09 7:13 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
---
.../xserver-xorg-conf/cm-t35/xorg.conf | 29 ++++++++++++++++++++
recipes/xorg-xserver/xserver-xorg-conf_0.1.bb | 2 +-
2 files changed, 30 insertions(+), 1 deletions(-)
create mode 100644 recipes/xorg-xserver/xserver-xorg-conf/cm-t35/xorg.conf
diff --git a/recipes/xorg-xserver/xserver-xorg-conf/cm-t35/xorg.conf b/recipes/xorg-xserver/xserver-xorg-conf/cm-t35/xorg.conf
new file mode 100644
index 0000000..07d849d
--- /dev/null
+++ b/recipes/xorg-xserver/xserver-xorg-conf/cm-t35/xorg.conf
@@ -0,0 +1,29 @@
+Section "Module"
+ Load "extmod"
+ Load "dbe"
+ Load "glx"
+ Load "freetype"
+ Load "type1"
+ Load "record"
+ Load "dri"
+EndSection
+
+Section "Monitor"
+ Identifier "Builtin Default Monitor"
+EndSection
+
+Section "Device"
+ Identifier "Builtin Default fbdev Device 0"
+ Driver "omapfb"
+EndSection
+
+Section "Screen"
+ Identifier "Builtin Default fbdev Screen 0"
+ Device "Builtin Default fbdev Device 0"
+ Monitor "Builtin Default Monitor"
+EndSection
+
+Section "ServerLayout"
+ Identifier "Builtin Default Layout"
+ Screen "Builtin Default fbdev Screen 0"
+EndSection
diff --git a/recipes/xorg-xserver/xserver-xorg-conf_0.1.bb b/recipes/xorg-xserver/xserver-xorg-conf_0.1.bb
index 8945e1e..77e0f8d 100644
--- a/recipes/xorg-xserver/xserver-xorg-conf_0.1.bb
+++ b/recipes/xorg-xserver/xserver-xorg-conf_0.1.bb
@@ -1,5 +1,5 @@
DESCRIPTION = "Machine specific xorg.conf files"
-PR = "r16"
+PR = "r17"
SRC_URI = "file://xorg.conf"
--
1.6.4.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-12-09 7:15 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-12-09 7:13 [PATCH 0/5 v2] Add CM-T35 support Mike Rapoport
2009-12-09 7:13 ` [PATCH 1/5] u-boot git: add cm-t35 support Mike Rapoport
2009-12-09 7:13 ` [PATCH 2/5] linux-omap 2.6.32: " Mike Rapoport
2009-12-09 7:13 ` [PATCH 3/5] cm-t35: add machine configuration Mike Rapoport
2009-12-09 7:13 ` [PATCH 4/5] angstrom-led-config: Add LED setup for the cm-t35 and bump PR Mike Rapoport
2009-12-09 7:13 ` [PATCH 5/5] xserver-xorg-conf: add cm-t35 support Mike Rapoport
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox