* [meta-handheld][PATCH 0/2] Pull request 20140107
@ 2014-01-07 18:31 Apelete Seketeli
2014-01-07 18:31 ` [meta-handheld][PATCH 1/2] linux-jlime-ben-nanonote: update recipe to kernel 3.12 Apelete Seketeli
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Apelete Seketeli @ 2014-01-07 18:31 UTC (permalink / raw)
To: openembedded-devel; +Cc: Paul Eggleton
Hello,
The Qi-Hardware community kernel now has an upstream compliant driver
to provide USB support for the Ben Nanonote, along with other features
and fixes.
The aforementioned changes were submitted upstream in order to have
full upstream support for the Ben kernel.
The patches that come as a follow-up of this message are an attempt to
provide an up-to-date kernel recipe for the Ben Nanonote in the
meantime, until the Qi-Hardware patches land upstream.
Changes were built from scratch and successfully tested on device.
The following changes since commit c82171b469e4515023908d86482df9baf7c5fc01:
linux-yocto*: collie: update Partition Configuration Register patch (2013-12-31 18:38:11 +0100)
are available in the git repository at:
git://git.seketeli.net/~apelete/meta-handheld.git update-ben-kernel-3.12
Apelete Seketeli (2):
linux-jlime-ben-nanonote: update recipe to kernel 3.12
linux-qi-ben-nanonote: rename previous linux-jlime-ben-nanonote
recipe
conf/machine/ben-nanonote.conf | 2 +-
.../config-ben-nanonote | 1301 ----------
.../fix-gcc-4.6.0-build-errors.patch | 124 -
.../jz4740-udc.patch | 2561 --------------------
.../logo_linux_clut224.tar.gz | Bin 8416 -> 0 bytes
.../modifier-keys.patch | 604 -----
...ote_2.6.36.bb => linux-qi-ben-nanonote_3.12.bb} | 13 +-
7 files changed, 4 insertions(+), 4601 deletions(-)
delete mode 100644 recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/config-ben-nanonote
delete mode 100644 recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/fix-gcc-4.6.0-build-errors.patch
delete mode 100644 recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/jz4740-udc.patch
delete mode 100644 recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/logo_linux_clut224.tar.gz
delete mode 100644 recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/modifier-keys.patch
rename recipes-kernel/linux/{linux-jlime-ben-nanonote_2.6.36.bb => linux-qi-ben-nanonote_3.12.bb} (68%)
--
1.7.10.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* [meta-handheld][PATCH 1/2] linux-jlime-ben-nanonote: update recipe to kernel 3.12
2014-01-07 18:31 [meta-handheld][PATCH 0/2] Pull request 20140107 Apelete Seketeli
@ 2014-01-07 18:31 ` Apelete Seketeli
2014-01-07 18:31 ` [meta-handheld][PATCH 2/2] linux-qi-ben-nanonote: rename previous linux-jlime-ben-nanonote recipe Apelete Seketeli
2014-01-08 22:19 ` [meta-handheld][PATCH 0/2] Pull request 20140107 Paul Eggleton
2 siblings, 0 replies; 4+ messages in thread
From: Apelete Seketeli @ 2014-01-07 18:31 UTC (permalink / raw)
To: openembedded-devel; +Cc: Paul Eggleton
Qi-Hardware community kernel now has an upstream compliant driver to
provide USB support for the Ben Nanonote, along with other features
and fixes.
Update the recipe to build from qi-kernel 3.12 source until the
Qi-Hardware patches land upstream.
Signed-off-by: Apelete Seketeli <apelete@seketeli.net>
---
.../config-ben-nanonote | 1301 ----------
.../fix-gcc-4.6.0-build-errors.patch | 124 -
.../jz4740-udc.patch | 2561 --------------------
.../logo_linux_clut224.tar.gz | Bin 8416 -> 0 bytes
.../modifier-keys.patch | 604 -----
..._2.6.36.bb => linux-jlime-ben-nanonote_3.12.bb} | 13 +-
6 files changed, 3 insertions(+), 4600 deletions(-)
delete mode 100644 recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/config-ben-nanonote
delete mode 100644 recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/fix-gcc-4.6.0-build-errors.patch
delete mode 100644 recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/jz4740-udc.patch
delete mode 100644 recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/logo_linux_clut224.tar.gz
delete mode 100644 recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/modifier-keys.patch
rename recipes-kernel/linux/{linux-jlime-ben-nanonote_2.6.36.bb => linux-jlime-ben-nanonote_3.12.bb} (68%)
diff --git a/recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/config-ben-nanonote b/recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/config-ben-nanonote
deleted file mode 100644
index 1b07454..0000000
--- a/recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/config-ben-nanonote
+++ /dev/null
@@ -1,1301 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.36
-# Wed Nov 3 18:41:44 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MIPS_ALCHEMY is not set
-# CONFIG_AR7 is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_JZ4740=y
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_JZ4740_QI_LB60=y
-CONFIG_HAVE_PWM=y
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_LOONGSON_MC146818 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-# CONFIG_KEXEC is not set
-# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
-CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_NVS=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_TCP_CONG_ADVANCED=y
-# CONFIG_TCP_CONG_BIC is not set
-# CONFIG_TCP_CONG_CUBIC is not set
-CONFIG_TCP_CONG_WESTWOOD=y
-# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-CONFIG_DEFAULT_WESTWOOD=y
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="westwood"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_L2TP is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-
-#
-# Some wireless drivers require a rate control algorithm
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-# CONFIG_CAIF is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND_ECC=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-CONFIG_MTD_NAND_JZ4740=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-# CONFIG_NET_ETHERNET is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-
-#
-# CAIF transport drivers
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-CONFIG_ISDN=y
-# CONFIG_ISDN_I4L is not set
-# CONFIG_ISDN_CAPI is not set
-# CONFIG_ISDN_DRV_GIGASET is not set
-# CONFIG_MISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_MATRIX=y
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-CONFIG_INPUT_PWM_BEEPER=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_ADXL34X is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_N_GSM is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX3107 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=2
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_RAMOOPS is not set
-# CONFIG_I2C is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-
-#
-# MODULbus GPIO expanders:
-#
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_TEST_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-CONFIG_BATTERY_JZ4740=y
-CONFIG_CHARGER_GPIO=y
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-CONFIG_MFD_SUPPORT=y
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB8500_CORE is not set
-CONFIG_MFD_JZ4740_ADC=y
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_FB_JZ4740=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-CONFIG_LCD_ILI8960=y
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_MIPS is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_JZ4740_SOC=y
-CONFIG_SND_JZ4740_SOC_I2S=y
-CONFIG_SND_JZ4740_SOC_QI_LB60=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_JZ4740_CODEC=y
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_JZ4740=y
-CONFIG_USB_JZ4740=y
-# CONFIG_USB_GADGET_M66592 is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FUNCTIONFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_MULTI is not set
-# CONFIG_USB_G_HID is not set
-# CONFIG_USB_G_DBGP is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-CONFIG_MMC_JZ4740=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_JZ4740=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-# CONFIG_JFFS2_ZLIB is not set
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_LKDTM is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_SPINLOCK_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_PCOMP2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_ZLIB=y
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/fix-gcc-4.6.0-build-errors.patch b/recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/fix-gcc-4.6.0-build-errors.patch
deleted file mode 100644
index 61c0724..0000000
--- a/recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/fix-gcc-4.6.0-build-errors.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-Fix GCC-4.6.0 'unused but set variables' build errors
-
-GCC-4.6 can find more unused code than previous versions could.
-This fixes relevant code as in upstream mainline kernel in changesets
-#f1b6a505, #c726b822, #7a6e4ca1, #91b51f30, #71271aab and #d3ce0e98.
-
-Signed-off-by: Apelete Seketeli <apelete@seketeli.net>
-
-Upstream-Status: Backport
-
-diff --git a/arch/mips/jz4740/dma.c b/arch/mips/jz4740/dma.c
-index 5ebe75a..d7feb89 100644
---- a/arch/mips/jz4740/dma.c
-+++ b/arch/mips/jz4740/dma.c
-@@ -242,9 +242,7 @@ EXPORT_SYMBOL_GPL(jz4740_dma_get_residue);
-
- static void jz4740_dma_chan_irq(struct jz4740_dma_chan *dma)
- {
-- uint32_t status;
--
-- status = jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id));
-+ (void) jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id));
-
- jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0,
- JZ_DMA_STATUS_CTRL_ENABLE | JZ_DMA_STATUS_CTRL_TRANSFER_DONE);
-diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
-index 5922342..dbbe0ce 100644
---- a/arch/mips/kernel/signal.c
-+++ b/arch/mips/kernel/signal.c
-@@ -84,7 +84,7 @@ static int protected_save_fp_context(struct sigcontext __user *sc)
-
- static int protected_restore_fp_context(struct sigcontext __user *sc)
- {
-- int err, tmp;
-+ int err, tmp __maybe_unused;
- while (1) {
- lock_fpu_owner();
- own_fpu_inatomic(0);
-diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
-index a0ed0e0..aae9866 100644
---- a/arch/mips/kernel/signal32.c
-+++ b/arch/mips/kernel/signal32.c
-@@ -115,7 +115,7 @@ static int protected_save_fp_context32(struct sigcontext32 __user *sc)
-
- static int protected_restore_fp_context32(struct sigcontext32 __user *sc)
- {
-- int err, tmp;
-+ int err, tmp __maybe_unused;
- while (1) {
- lock_fpu_owner();
- own_fpu_inatomic(0);
-diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
-index 1dc6edf..18cd6f9 100644
---- a/arch/mips/kernel/syscall.c
-+++ b/arch/mips/kernel/syscall.c
-@@ -383,12 +383,11 @@ save_static_function(sys_sysmips);
- static int __used noinline
- _sys_sysmips(nabi_no_regargs struct pt_regs regs)
- {
-- long cmd, arg1, arg2, arg3;
-+ long cmd, arg1, arg2;
-
- cmd = regs.regs[4];
- arg1 = regs.regs[5];
- arg2 = regs.regs[6];
-- arg3 = regs.regs[7];
-
- switch (cmd) {
- case MIPS_ATOMIC_SET:
-diff --git a/arch/mips/math-emu/ieee754int.h b/arch/mips/math-emu/ieee754int.h
-index 1a846c5..9f867cd 100644
---- a/arch/mips/math-emu/ieee754int.h
-+++ b/arch/mips/math-emu/ieee754int.h
-@@ -71,7 +71,7 @@
-
-
- #define COMPXSP \
-- unsigned xm; int xe; int xs; int xc
-+ unsigned xm; int xe; int xs __maybe_unused; int xc
-
- #define COMPYSP \
- unsigned ym; int ye; int ys; int yc
-@@ -105,7 +105,7 @@
-
-
- #define COMPXDP \
--u64 xm; int xe; int xs; int xc
-+u64 xm; int xe; int xs __maybe_unused; int xc
-
- #define COMPYDP \
- u64 ym; int ye; int ys; int yc
-diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
-index 6721ee2..8b24bcd 100644
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -1076,7 +1076,6 @@ static int __cpuinit probe_scache(void)
- unsigned long flags, addr, begin, end, pow2;
- unsigned int config = read_c0_config();
- struct cpuinfo_mips *c = ¤t_cpu_data;
-- int tmp;
-
- if (config & CONF_SC)
- return 0;
-@@ -1109,7 +1108,6 @@ static int __cpuinit probe_scache(void)
-
- /* Now search for the wrap around point. */
- pow2 = (128 * 1024);
-- tmp = 0;
- for (addr = begin + (128 * 1024); addr < end; addr = begin + pow2) {
- cache_op(Index_Load_Tag_SD, addr);
- __asm__ __volatile__("nop; nop; nop; nop;"); /* hazard... */
-diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
-index 2efcbd2..279599e 100644
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -324,7 +324,7 @@ int page_is_ram(unsigned long pagenr)
- void __init paging_init(void)
- {
- unsigned long max_zone_pfns[MAX_NR_ZONES];
-- unsigned long lastpfn;
-+ unsigned long lastpfn __maybe_unused;
-
- pagetable_init();
-
diff --git a/recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/jz4740-udc.patch b/recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/jz4740-udc.patch
deleted file mode 100644
index 67dca33..0000000
--- a/recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/jz4740-udc.patch
+++ /dev/null
@@ -1,2561 +0,0 @@
-diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
-index 607d0db..35d5fbc 100644
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -121,11 +121,25 @@ choice
- #
- # Integrated controllers
- #
-+config USB_GADGET_JZ4740
-+ boolean "JZ4740 UDC"
-+ depends on MACH_JZ4740
-+ select USB_GADGET_SELECTED
-+ select USB_GADGET_DUALSPEED
-+ help
-+ Select this to support the Ingenic JZ4740 processor
-+ high speed USB device controller.
-+
-+config USB_JZ4740
-+ tristate
-+ depends on USB_GADGET_JZ4740
-+ default USB_GADGET
-
- config USB_GADGET_AT91
- boolean "Atmel AT91 USB Device Port"
- depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45
- select USB_GADGET_SELECTED
-+
- help
- Many Atmel AT91 processors (such as the AT91RM2000) have a
- full speed USB Device Port with support for five configurable
-diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
-index 5780db4..c148025 100644
---- a/drivers/usb/gadget/Makefile
-+++ b/drivers/usb/gadget/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o
- obj-$(CONFIG_USB_CI13XXX) += ci13xxx_udc.o
- obj-$(CONFIG_USB_S3C_HSOTG) += s3c-hsotg.o
- obj-$(CONFIG_USB_LANGWELL) += langwell_udc.o
-+obj-$(CONFIG_USB_JZ4740) += jz4740_udc.o
-
- #
- # USB gadget drivers
-diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
-index e511fec..b2ec5fb 100644
---- a/drivers/usb/gadget/gadget_chips.h
-+++ b/drivers/usb/gadget/gadget_chips.h
-@@ -15,6 +15,12 @@
- #ifndef __GADGET_CHIPS_H
- #define __GADGET_CHIPS_H
-
-+#ifdef CONFIG_USB_GADGET_JZ4740
-+#define gadget_is_jz4740(g) !strcmp("ingenic_hsusb", (g)->name)
-+#else
-+#define gadget_is_jz4740(g) 0
-+#endif
-+
- #ifdef CONFIG_USB_GADGET_NET2280
- #define gadget_is_net2280(g) !strcmp("net2280", (g)->name)
- #else
-@@ -200,6 +206,9 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
- return 0x25;
- else if (gadget_is_s3c_hsotg(gadget))
- return 0x26;
-+ else if (gadget_is_jz4740(gadget))
-+ return 0x27;
-+
- return -ENOENT;
- }
-
-diff --git a/drivers/usb/gadget/jz4740_udc.c b/drivers/usb/gadget/jz4740_udc.c
-new file mode 100644
-index 0000000..68e511a
---- /dev/null
-+++ b/drivers/usb/gadget/jz4740_udc.c
-@@ -0,0 +1,2377 @@
-+/*
-+ * linux/drivers/usb/gadget/jz4740_udc.c
-+ *
-+ * Ingenic JZ4740 on-chip high speed USB device controller
-+ *
-+ * Copyright (C) 2006 - 2008 Ingenic Semiconductor Inc.
-+ * Author: <jlwei@ingenic.cn>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+/*
-+ * This device has ep0, two bulk-in/interrupt-in endpoints, and one bulk-out endpoint.
-+ *
-+ * - Endpoint numbering is fixed: ep0, ep1in-int, ep2in-bulk, ep1out-bulk.
-+ * - DMA works with bulk-in (channel 1) and bulk-out (channel 2) endpoints.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/ioport.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/proc_fs.h>
-+#include <linux/usb.h>
-+#include <linux/usb/gadget.h>
-+#include <linux/clk.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+#include <asm/mach-jz4740/clock.h>
-+
-+#include "jz4740_udc.h"
-+
-+#define JZ_REG_UDC_FADDR 0x00 /* Function Address 8-bit */
-+#define JZ_REG_UDC_POWER 0x01 /* Power Management 8-bit */
-+#define JZ_REG_UDC_INTRIN 0x02 /* Interrupt IN 16-bit */
-+#define JZ_REG_UDC_INTROUT 0x04 /* Interrupt OUT 16-bit */
-+#define JZ_REG_UDC_INTRINE 0x06 /* Intr IN enable 16-bit */
-+#define JZ_REG_UDC_INTROUTE 0x08 /* Intr OUT enable 16-bit */
-+#define JZ_REG_UDC_INTRUSB 0x0a /* Interrupt USB 8-bit */
-+#define JZ_REG_UDC_INTRUSBE 0x0b /* Interrupt USB Enable 8-bit */
-+#define JZ_REG_UDC_FRAME 0x0c /* Frame number 16-bit */
-+#define JZ_REG_UDC_INDEX 0x0e /* Index register 8-bit */
-+#define JZ_REG_UDC_TESTMODE 0x0f /* USB test mode 8-bit */
-+
-+#define JZ_REG_UDC_CSR0 0x12 /* EP0 CSR 8-bit */
-+#define JZ_REG_UDC_INMAXP 0x10 /* EP1-2 IN Max Pkt Size 16-bit */
-+#define JZ_REG_UDC_INCSR 0x12 /* EP1-2 IN CSR LSB 8/16bit */
-+#define JZ_REG_UDC_INCSRH 0x13 /* EP1-2 IN CSR MSB 8-bit */
-+#define JZ_REG_UDC_OUTMAXP 0x14 /* EP1 OUT Max Pkt Size 16-bit */
-+#define JZ_REG_UDC_OUTCSR 0x16 /* EP1 OUT CSR LSB 8/16bit */
-+#define JZ_REG_UDC_OUTCSRH 0x17 /* EP1 OUT CSR MSB 8-bit */
-+#define JZ_REG_UDC_OUTCOUNT 0x18 /* bytes in EP0/1 OUT FIFO 16-bit */
-+
-+#define JZ_REG_UDC_EP_FIFO(x) (4 * (x) + 0x20)
-+
-+#define JZ_REG_UDC_EPINFO 0x78 /* Endpoint information */
-+#define JZ_REG_UDC_RAMINFO 0x79 /* RAM information */
-+
-+#define JZ_REG_UDC_INTR 0x200 /* DMA pending interrupts */
-+#define JZ_REG_UDC_CNTL1 0x204 /* DMA channel 1 control */
-+#define JZ_REG_UDC_ADDR1 0x208 /* DMA channel 1 AHB memory addr */
-+#define JZ_REG_UDC_COUNT1 0x20c /* DMA channel 1 byte count */
-+#define JZ_REG_UDC_CNTL2 0x214 /* DMA channel 2 control */
-+#define JZ_REG_UDC_ADDR2 0x218 /* DMA channel 2 AHB memory addr */
-+#define JZ_REG_UDC_COUNT2 0x21c /* DMA channel 2 byte count */
-+
-+/* Power register bit masks */
-+#define USB_POWER_SUSPENDM 0x01
-+#define USB_POWER_RESUME 0x04
-+#define USB_POWER_HSMODE 0x10
-+#define USB_POWER_HSENAB 0x20
-+#define USB_POWER_SOFTCONN 0x40
-+
-+/* Interrupt register bit masks */
-+#define USB_INTR_SUSPEND 0x01
-+#define USB_INTR_RESUME 0x02
-+#define USB_INTR_RESET 0x04
-+
-+#define USB_INTR_EP0 0x0001
-+#define USB_INTR_INEP1 0x0002
-+#define USB_INTR_INEP2 0x0004
-+#define USB_INTR_OUTEP1 0x0002
-+
-+/* CSR0 bit masks */
-+#define USB_CSR0_OUTPKTRDY 0x01
-+#define USB_CSR0_INPKTRDY 0x02
-+#define USB_CSR0_SENTSTALL 0x04
-+#define USB_CSR0_DATAEND 0x08
-+#define USB_CSR0_SETUPEND 0x10
-+#define USB_CSR0_SENDSTALL 0x20
-+#define USB_CSR0_SVDOUTPKTRDY 0x40
-+#define USB_CSR0_SVDSETUPEND 0x80
-+
-+/* Endpoint CSR register bits */
-+#define USB_INCSRH_AUTOSET 0x80
-+#define USB_INCSRH_ISO 0x40
-+#define USB_INCSRH_MODE 0x20
-+#define USB_INCSRH_DMAREQENAB 0x10
-+#define USB_INCSRH_DMAREQMODE 0x04
-+#define USB_INCSR_CDT 0x40
-+#define USB_INCSR_SENTSTALL 0x20
-+#define USB_INCSR_SENDSTALL 0x10
-+#define USB_INCSR_FF 0x08
-+#define USB_INCSR_UNDERRUN 0x04
-+#define USB_INCSR_FFNOTEMPT 0x02
-+#define USB_INCSR_INPKTRDY 0x01
-+#define USB_OUTCSRH_AUTOCLR 0x80
-+#define USB_OUTCSRH_ISO 0x40
-+#define USB_OUTCSRH_DMAREQENAB 0x20
-+#define USB_OUTCSRH_DNYT 0x10
-+#define USB_OUTCSRH_DMAREQMODE 0x08
-+#define USB_OUTCSR_CDT 0x80
-+#define USB_OUTCSR_SENTSTALL 0x40
-+#define USB_OUTCSR_SENDSTALL 0x20
-+#define USB_OUTCSR_FF 0x10
-+#define USB_OUTCSR_DATAERR 0x08
-+#define USB_OUTCSR_OVERRUN 0x04
-+#define USB_OUTCSR_FFFULL 0x02
-+#define USB_OUTCSR_OUTPKTRDY 0x01
-+
-+/* DMA control bits */
-+#define USB_CNTL_ENA 0x01
-+#define USB_CNTL_DIR_IN 0x02
-+#define USB_CNTL_MODE_1 0x04
-+#define USB_CNTL_INTR_EN 0x08
-+#define USB_CNTL_EP(n) ((n) << 4)
-+#define USB_CNTL_BURST_0 (0 << 9)
-+#define USB_CNTL_BURST_4 (1 << 9)
-+#define USB_CNTL_BURST_8 (2 << 9)
-+#define USB_CNTL_BURST_16 (3 << 9)
-+
-+
-+#ifndef DEBUG
-+# define DEBUG(fmt,args...) do {} while(0)
-+#endif
-+#ifndef DEBUG_EP0
-+# define NO_STATES
-+# define DEBUG_EP0(fmt,args...) do {} while(0)
-+#endif
-+#ifndef DEBUG_SETUP
-+# define DEBUG_SETUP(fmt,args...) do {} while(0)
-+#endif
-+
-+static unsigned int use_dma = 0; /* 1: use DMA, 0: use PIO */
-+
-+module_param(use_dma, int, 0);
-+MODULE_PARM_DESC(use_dma, "DMA mode enable flag");
-+
-+static struct jz4740_udc jz4740_udc_controller;
-+
-+/*
-+ * Local declarations.
-+ */
-+static void jz4740_ep0_kick(struct jz4740_udc *dev, struct jz4740_ep *ep);
-+static void jz4740_handle_ep0(struct jz4740_udc *dev, uint32_t intr);
-+
-+static void done(struct jz4740_ep *ep, struct jz4740_request *req,
-+ int status);
-+static void pio_irq_enable(struct jz4740_ep *ep);
-+static void pio_irq_disable(struct jz4740_ep *ep);
-+static void stop_activity(struct jz4740_udc *dev,
-+ struct usb_gadget_driver *driver);
-+static void nuke(struct jz4740_ep *ep, int status);
-+static void flush(struct jz4740_ep *ep);
-+static void udc_set_address(struct jz4740_udc *dev, unsigned char address);
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* inline functions of register read/write/set/clear */
-+
-+static inline uint8_t usb_readb(struct jz4740_udc *udc, size_t reg)
-+{
-+ return readb(udc->base + reg);
-+}
-+
-+static inline uint16_t usb_readw(struct jz4740_udc *udc, size_t reg)
-+{
-+ return readw(udc->base + reg);
-+}
-+
-+static inline uint32_t usb_readl(struct jz4740_udc *udc, size_t reg)
-+{
-+ return readl(udc->base + reg);
-+}
-+
-+static inline void usb_writeb(struct jz4740_udc *udc, size_t reg, uint8_t val)
-+{
-+ writeb(val, udc->base + reg);
-+}
-+
-+static inline void usb_writew(struct jz4740_udc *udc, size_t reg, uint16_t val)
-+{
-+ writew(val, udc->base + reg);
-+}
-+
-+static inline void usb_writel(struct jz4740_udc *udc, size_t reg, uint32_t val)
-+{
-+ writel(val, udc->base + reg);
-+}
-+
-+static inline void usb_setb(struct jz4740_udc *udc, size_t reg, uint8_t mask)
-+{
-+ usb_writeb(udc, reg, usb_readb(udc, reg) | mask);
-+}
-+
-+static inline void usb_setw(struct jz4740_udc *udc, size_t reg, uint8_t mask)
-+{
-+ usb_writew(udc, reg, usb_readw(udc, reg) | mask);
-+}
-+
-+static inline void usb_clearb(struct jz4740_udc *udc, size_t reg, uint8_t mask)
-+{
-+ usb_writeb(udc, reg, usb_readb(udc, reg) & ~mask);
-+}
-+
-+static inline void usb_clearw(struct jz4740_udc *udc, size_t reg, uint16_t mask)
-+{
-+ usb_writew(udc, reg, usb_readw(udc, reg) & ~mask);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static inline void jz_udc_set_index(struct jz4740_udc *udc, uint8_t index)
-+{
-+ usb_writeb(udc, JZ_REG_UDC_INDEX, index);
-+}
-+
-+static inline void jz_udc_select_ep(struct jz4740_ep *ep)
-+{
-+ jz_udc_set_index(ep->dev, ep_index(ep));
-+}
-+
-+static inline int write_packet(struct jz4740_ep *ep,
-+ struct jz4740_request *req, unsigned int count)
-+{
-+ uint8_t *buf;
-+ unsigned int length, nlong, nbyte;
-+ void __iomem *fifo = ep->dev->base + ep->fifo;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ buf = req->req.buf + req->req.actual;
-+ prefetch(buf);
-+
-+ length = req->req.length - req->req.actual;
-+ if (length > count)
-+ length = count;
-+ req->req.actual += length;
-+
-+ DEBUG("Write %d (count %d), fifo %x\n", length, count, ep->fifo);
-+
-+ nlong = length >> 2;
-+ nbyte = length & 0x3;
-+ while (nlong--) {
-+ writel(*((uint32_t *)buf), fifo);
-+ buf += 4;
-+ }
-+ while (nbyte--)
-+ writeb(*buf++, fifo);
-+
-+ return length;
-+}
-+
-+static int read_packet(struct jz4740_ep *ep,
-+ struct jz4740_request *req, unsigned int count)
-+{
-+ uint8_t *buf;
-+ unsigned int length, nlong, nbyte;
-+ void __iomem *fifo = ep->dev->base + ep->fifo;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ buf = req->req.buf + req->req.actual;
-+ prefetchw(buf);
-+
-+ length = req->req.length - req->req.actual;
-+ if (length > count)
-+ length = count;
-+ req->req.actual += length;
-+
-+ DEBUG("Read %d, fifo %x\n", length, ep->fifo);
-+ nlong = length >> 2;
-+ nbyte = length & 0x3;
-+ while (nlong--) {
-+ *((uint32_t *)buf) = readl(fifo);
-+ buf += 4;
-+ }
-+ while (nbyte--)
-+ *buf++ = readb(fifo);
-+
-+ return length;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * udc_disable - disable USB device controller
-+ */
-+static void udc_disable(struct jz4740_udc *dev)
-+{
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ udc_set_address(dev, 0);
-+
-+ /* Disable interrupts */
-+ usb_writew(dev, JZ_REG_UDC_INTRINE, 0);
-+ usb_writew(dev, JZ_REG_UDC_INTROUTE, 0);
-+ usb_writeb(dev, JZ_REG_UDC_INTRUSBE, 0);
-+
-+ /* Disable DMA */
-+ usb_writel(dev, JZ_REG_UDC_CNTL1, 0);
-+ usb_writel(dev, JZ_REG_UDC_CNTL2, 0);
-+
-+ /* Disconnect from usb */
-+ usb_clearb(dev, JZ_REG_UDC_POWER, USB_POWER_SOFTCONN);
-+
-+ /* Disable the USB PHY */
-+ clk_disable(dev->clk);
-+
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ dev->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+ return;
-+}
-+
-+/*
-+ * udc_reinit - initialize software state
-+ */
-+static void udc_reinit(struct jz4740_udc *dev)
-+{
-+ int i;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ /* device/ep0 records init */
-+ INIT_LIST_HEAD(&dev->gadget.ep_list);
-+ INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
-+ dev->ep0state = WAIT_FOR_SETUP;
-+
-+ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
-+ struct jz4740_ep *ep = &dev->ep[i];
-+
-+ if (i != 0)
-+ list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
-+
-+ INIT_LIST_HEAD(&ep->queue);
-+ ep->desc = 0;
-+ ep->stopped = 0;
-+ }
-+}
-+
-+/* until it's enabled, this UDC should be completely invisible
-+ * to any USB host.
-+ */
-+static void udc_enable(struct jz4740_udc *dev)
-+{
-+ int i;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ /* UDC state is incorrect - Added by River */
-+ if (dev->state != UDC_STATE_ENABLE) {
-+ return;
-+ }
-+
-+ dev->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+ /* Flush FIFO for each */
-+ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
-+ struct jz4740_ep *ep = &dev->ep[i];
-+
-+ jz_udc_set_index(dev, ep_index(ep));
-+ flush(ep);
-+ }
-+
-+ /* Set this bit to allow the UDC entering low-power mode when
-+ * there are no actions on the USB bus.
-+ * UDC still works during this bit was set.
-+ */
-+ jz4740_clock_udc_enable_auto_suspend();
-+
-+ /* Enable the USB PHY */
-+ clk_enable(dev->clk);
-+
-+ /* Disable interrupts */
-+/* usb_writew(dev, JZ_REG_UDC_INTRINE, 0);
-+ usb_writew(dev, JZ_REG_UDC_INTROUTE, 0);
-+ usb_writeb(dev, JZ_REG_UDC_INTRUSBE, 0);*/
-+
-+ /* Enable interrupts */
-+ usb_setw(dev, JZ_REG_UDC_INTRINE, USB_INTR_EP0);
-+ usb_setb(dev, JZ_REG_UDC_INTRUSBE, USB_INTR_RESET);
-+ /* Don't enable rest of the interrupts */
-+ /* usb_setw(dev, JZ_REG_UDC_INTRINE, USB_INTR_INEP1 | USB_INTR_INEP2);
-+ usb_setw(dev, JZ_REG_UDC_INTROUTE, USB_INTR_OUTEP1); */
-+
-+ /* Enable SUSPEND */
-+ /* usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_SUSPENDM); */
-+
-+ /* Enable HS Mode */
-+ usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_HSENAB);
-+
-+ /* Let host detect UDC:
-+ * Software must write a 1 to the PMR:USB_POWER_SOFTCONN bit to turn this
-+ * transistor on and pull the USBDP pin HIGH.
-+ */
-+ usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_SOFTCONN);
-+
-+ return;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* keeping it simple:
-+ * - one bus driver, initted first;
-+ * - one function driver, initted second
-+ */
-+
-+/*
-+ * Register entry point for the peripheral controller driver.
-+ */
-+
-+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
-+{
-+ struct jz4740_udc *dev = &jz4740_udc_controller;
-+ int retval;
-+
-+ if (!driver || !driver->bind)
-+ return -EINVAL;
-+
-+ if (!dev)
-+ return -ENODEV;
-+
-+ if (dev->driver)
-+ return -EBUSY;
-+
-+ /* hook up the driver */
-+ dev->driver = driver;
-+ dev->gadget.dev.driver = &driver->driver;
-+
-+ retval = driver->bind(&dev->gadget);
-+ if (retval) {
-+ DEBUG("%s: bind to driver %s --> error %d\n", dev->gadget.name,
-+ driver->driver.name, retval);
-+ dev->driver = 0;
-+ return retval;
-+ }
-+
-+ /* then enable host detection and ep0; and we're ready
-+ * for set_configuration as well as eventual disconnect.
-+ */
-+ udc_enable(dev);
-+
-+ DEBUG("%s: registered gadget driver '%s'\n", dev->gadget.name,
-+ driver->driver.name);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(usb_gadget_register_driver);
-+
-+static void stop_activity(struct jz4740_udc *dev,
-+ struct usb_gadget_driver *driver)
-+{
-+ int i;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ /* don't disconnect drivers more than once */
-+ if (dev->gadget.speed == USB_SPEED_UNKNOWN)
-+ driver = 0;
-+ dev->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+ /* prevent new request submissions, kill any outstanding requests */
-+ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
-+ struct jz4740_ep *ep = &dev->ep[i];
-+
-+ ep->stopped = 1;
-+
-+ jz_udc_set_index(dev, ep_index(ep));
-+ nuke(ep, -ESHUTDOWN);
-+ }
-+
-+ /* report disconnect; the driver is already quiesced */
-+ if (driver) {
-+ spin_unlock(&dev->lock);
-+ driver->disconnect(&dev->gadget);
-+ spin_lock(&dev->lock);
-+ }
-+
-+ /* re-init driver-visible data structures */
-+ udc_reinit(dev);
-+}
-+
-+
-+/*
-+ * Unregister entry point for the peripheral controller driver.
-+ */
-+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-+{
-+ struct jz4740_udc *dev = &jz4740_udc_controller;
-+ unsigned long flags;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ if (!dev)
-+ return -ENODEV;
-+ if (!driver || driver != dev->driver)
-+ return -EINVAL;
-+ if (!driver->unbind)
-+ return -EBUSY;
-+
-+ spin_lock_irqsave(&dev->lock, flags);
-+ dev->driver = 0;
-+ stop_activity(dev, driver);
-+ spin_unlock_irqrestore(&dev->lock, flags);
-+
-+ driver->unbind(&dev->gadget);
-+
-+ udc_disable(dev);
-+
-+ DEBUG("unregistered driver '%s'\n", driver->driver.name);
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(usb_gadget_unregister_driver);
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * Starting DMA using mode 1
-+ */
-+static void kick_dma(struct jz4740_ep *ep, struct jz4740_request *req)
-+{
-+ struct jz4740_udc *dev = ep->dev;
-+ uint32_t count = req->req.length;
-+ uint32_t physaddr = virt_to_phys((void *)req->req.buf);
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ jz_udc_select_ep(ep);
-+
-+ if (ep_is_in(ep)) { /* Bulk-IN transfer using DMA channel 1 */
-+ ep->reg_addr = JZ_REG_UDC_ADDR1;
-+
-+ dma_cache_wback_inv((unsigned long)req->req.buf, count);
-+
-+ pio_irq_enable(ep);
-+
-+ usb_writeb(dev, JZ_REG_UDC_INCSRH,
-+ USB_INCSRH_DMAREQENAB | USB_INCSRH_AUTOSET | USB_INCSRH_DMAREQMODE);
-+
-+ usb_writel(dev, JZ_REG_UDC_ADDR1, physaddr);
-+ usb_writel(dev, JZ_REG_UDC_COUNT1, count);
-+ usb_writel(dev, JZ_REG_UDC_CNTL1, USB_CNTL_ENA | USB_CNTL_DIR_IN | USB_CNTL_MODE_1 |
-+ USB_CNTL_INTR_EN | USB_CNTL_BURST_16 | USB_CNTL_EP(ep_index(ep)));
-+ }
-+ else { /* Bulk-OUT transfer using DMA channel 2 */
-+ ep->reg_addr = JZ_REG_UDC_ADDR2;
-+
-+ dma_cache_wback_inv((unsigned long)req->req.buf, count);
-+
-+ pio_irq_enable(ep);
-+
-+ usb_setb(dev, JZ_REG_UDC_OUTCSRH,
-+ USB_OUTCSRH_DMAREQENAB | USB_OUTCSRH_AUTOCLR | USB_OUTCSRH_DMAREQMODE);
-+
-+ usb_writel(dev, JZ_REG_UDC_ADDR2, physaddr);
-+ usb_writel(dev, JZ_REG_UDC_COUNT2, count);
-+ usb_writel(dev, JZ_REG_UDC_CNTL2, USB_CNTL_ENA | USB_CNTL_MODE_1 |
-+ USB_CNTL_INTR_EN | USB_CNTL_BURST_16 | USB_CNTL_EP(ep_index(ep)));
-+ }
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/** Write request to FIFO (max write == maxp size)
-+ * Return: 0 = still running, 1 = completed, negative = errno
-+ * NOTE: INDEX register must be set for EP
-+ */
-+static int write_fifo(struct jz4740_ep *ep, struct jz4740_request *req)
-+{
-+ struct jz4740_udc *dev = ep->dev;
-+ uint32_t max, csr;
-+ uint32_t physaddr = virt_to_phys((void *)req->req.buf);
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+ max = le16_to_cpu(ep->desc->wMaxPacketSize);
-+
-+ if (use_dma) {
-+ uint32_t dma_count;
-+
-+ /* DMA interrupt generated due to the last packet loaded into the FIFO */
-+
-+ dma_count = usb_readl(dev, ep->reg_addr) - physaddr;
-+ req->req.actual += dma_count;
-+
-+ if (dma_count % max) {
-+ /* If the last packet is less than MAXP, set INPKTRDY manually */
-+ usb_setb(dev, ep->csr, USB_INCSR_INPKTRDY);
-+ }
-+
-+ done(ep, req, 0);
-+ if (list_empty(&ep->queue)) {
-+ pio_irq_disable(ep);
-+ return 1;
-+ }
-+ else {
-+ /* advance the request queue */
-+ req = list_entry(ep->queue.next, struct jz4740_request, queue);
-+ kick_dma(ep, req);
-+ return 0;
-+ }
-+ }
-+
-+ /*
-+ * PIO mode handling starts here ...
-+ */
-+
-+ csr = usb_readb(dev, ep->csr);
-+
-+ if (!(csr & USB_INCSR_FFNOTEMPT)) {
-+ unsigned count;
-+ int is_last, is_short;
-+
-+ count = write_packet(ep, req, max);
-+ usb_setb(dev, ep->csr, USB_INCSR_INPKTRDY);
-+
-+ /* last packet is usually short (or a zlp) */
-+ if (unlikely(count != max))
-+ is_last = is_short = 1;
-+ else {
-+ if (likely(req->req.length != req->req.actual)
-+ || req->req.zero)
-+ is_last = 0;
-+ else
-+ is_last = 1;
-+ /* interrupt/iso maxpacket may not fill the fifo */
-+ is_short = unlikely(max < ep_maxpacket(ep));
-+ }
-+
-+ DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __FUNCTION__,
-+ ep->ep.name, count,
-+ is_last ? "/L" : "", is_short ? "/S" : "",
-+ req->req.length - req->req.actual, req);
-+
-+ /* requests complete when all IN data is in the FIFO */
-+ if (is_last) {
-+ done(ep, req, 0);
-+ if (list_empty(&ep->queue)) {
-+ pio_irq_disable(ep);
-+ }
-+ return 1;
-+ }
-+ } else {
-+ DEBUG("Hmm.. %d ep FIFO is not empty!\n", ep_index(ep));
-+ }
-+
-+ return 0;
-+}
-+
-+/** Read to request from FIFO (max read == bytes in fifo)
-+ * Return: 0 = still running, 1 = completed, negative = errno
-+ * NOTE: INDEX register must be set for EP
-+ */
-+static int read_fifo(struct jz4740_ep *ep, struct jz4740_request *req)
-+{
-+ struct jz4740_udc *dev = ep->dev;
-+ uint32_t csr;
-+ unsigned count, is_short;
-+
-+#if 0
-+ uint32_t physaddr = virt_to_phys((void *)req->req.buf);
-+
-+ if (use_dma) {
-+ uint32_t dma_count;
-+
-+ /* DMA interrupt generated due to a packet less than MAXP loaded into the FIFO */
-+
-+ dma_count = usb_readl(dev, ep->reg_addr) - physaddr;
-+ req->req.actual += dma_count;
-+
-+ /* Disable interrupt and DMA */
-+ pio_irq_disable(ep);
-+ usb_writel(dev, JZ_REG_UDC_CNTL2, 0);
-+
-+ /* Read all bytes from this packet */
-+ count = usb_readw(dev, JZ_REG_UDC_OUTCOUNT);
-+ count = read_packet(ep, req, count);
-+
-+ if (count) {
-+ /* If the last packet is greater than zero, clear OUTPKTRDY manually */
-+ usb_clearb(dev, ep->csr, USB_OUTCSR_OUTPKTRDY);
-+ }
-+ done(ep, req, 0);
-+
-+ if (!list_empty(&ep->queue)) {
-+ /* advance the request queue */
-+ req = list_entry(ep->queue.next, struct jz4740_request, queue);
-+ kick_dma(ep, req);
-+ }
-+
-+ return 1;
-+ }
-+#endif
-+ /*
-+ * PIO mode handling starts here ...
-+ */
-+
-+ /* make sure there's a packet in the FIFO. */
-+ csr = usb_readb(dev, ep->csr);
-+ if (!(csr & USB_OUTCSR_OUTPKTRDY)) {
-+ DEBUG("%s: Packet NOT ready!\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ /* read all bytes from this packet */
-+ count = usb_readw(dev, JZ_REG_UDC_OUTCOUNT);
-+
-+ is_short = (count < ep->ep.maxpacket);
-+
-+ count = read_packet(ep, req, count);
-+
-+ DEBUG("read %s %02x, %d bytes%s req %p %d/%d\n",
-+ ep->ep.name, csr, count,
-+ is_short ? "/S" : "", req, req->req.actual, req->req.length);
-+
-+ /* Clear OutPktRdy */
-+ usb_clearb(dev, ep->csr, USB_OUTCSR_OUTPKTRDY);
-+
-+ /* completion */
-+ if (is_short || req->req.actual == req->req.length) {
-+ done(ep, req, 0);
-+
-+ if (list_empty(&ep->queue))
-+ pio_irq_disable(ep);
-+ return 1;
-+ }
-+
-+ /* finished that packet. the next one may be waiting... */
-+ return 0;
-+}
-+
-+/*
-+ * done - retire a request; caller blocked irqs
-+ * INDEX register is preserved to keep same
-+ */
-+static void done(struct jz4740_ep *ep, struct jz4740_request *req, int status)
-+{
-+ unsigned int stopped = ep->stopped;
-+ uint32_t index;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, ep);
-+ list_del_init(&req->queue);
-+
-+ if (likely(req->req.status == -EINPROGRESS))
-+ req->req.status = status;
-+ else
-+ status = req->req.status;
-+
-+ if (status && status != -ESHUTDOWN)
-+ DEBUG("complete %s req %p stat %d len %u/%u\n",
-+ ep->ep.name, &req->req, status,
-+ req->req.actual, req->req.length);
-+
-+ /* don't modify queue heads during completion callback */
-+ ep->stopped = 1;
-+ /* Read current index (completion may modify it) */
-+ index = usb_readb(ep->dev, JZ_REG_UDC_INDEX);
-+ spin_unlock_irqrestore(&ep->dev->lock, ep->dev->lock_flags);
-+
-+ req->req.complete(&ep->ep, &req->req);
-+
-+ spin_lock_irqsave(&ep->dev->lock, ep->dev->lock_flags);
-+ /* Restore index */
-+ jz_udc_set_index(ep->dev, index);
-+ ep->stopped = stopped;
-+}
-+
-+/** Enable EP interrupt */
-+static void pio_irq_enable(struct jz4740_ep *ep)
-+{
-+ uint8_t index = ep_index(ep);
-+ struct jz4740_udc *dev = ep->dev;
-+ DEBUG("%s: EP%d %s\n", __FUNCTION__, ep_index(ep), ep_is_in(ep) ? "IN": "OUT");
-+
-+ if (ep_is_in(ep)) {
-+ switch (index) {
-+ case 1:
-+ case 2:
-+ usb_setw(dev, JZ_REG_UDC_INTRINE, BIT(index));
-+ break;
-+ default:
-+ DEBUG("Unknown endpoint: %d\n", index);
-+ break;
-+ }
-+ }
-+ else {
-+ switch (index) {
-+ case 1:
-+ usb_setw(dev, JZ_REG_UDC_INTROUTE, BIT(index));
-+ break;
-+ default:
-+ DEBUG("Unknown endpoint: %d\n", index);
-+ break;
-+ }
-+ }
-+}
-+
-+/** Disable EP interrupt */
-+static void pio_irq_disable(struct jz4740_ep *ep)
-+{
-+ uint8_t index = ep_index(ep);
-+
-+ DEBUG("%s: EP%d %s\n", __FUNCTION__, ep_index(ep), ep_is_in(ep) ? "IN": "OUT");
-+
-+ if (ep_is_in(ep)) {
-+ switch (ep_index(ep)) {
-+ case 1:
-+ case 2:
-+ usb_clearw(ep->dev, JZ_REG_UDC_INTRINE, BIT(index));
-+ break;
-+ default:
-+ DEBUG("Unknown endpoint: %d\n", index);
-+ break;
-+ }
-+ }
-+ else {
-+ switch (ep_index(ep)) {
-+ case 1:
-+ usb_clearw(ep->dev, JZ_REG_UDC_INTROUTE, BIT(index));
-+ break;
-+ default:
-+ DEBUG("Unknown endpoint: %d\n", index);
-+ break;
-+ }
-+ }
-+}
-+
-+/*
-+ * nuke - dequeue ALL requests
-+ */
-+static void nuke(struct jz4740_ep *ep, int status)
-+{
-+ struct jz4740_request *req;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, ep);
-+
-+ /* Flush FIFO */
-+ flush(ep);
-+
-+ /* called with irqs blocked */
-+ while (!list_empty(&ep->queue)) {
-+ req = list_entry(ep->queue.next, struct jz4740_request, queue);
-+ done(ep, req, status);
-+ }
-+
-+ /* Disable IRQ if EP is enabled (has descriptor) */
-+ if (ep->desc)
-+ pio_irq_disable(ep);
-+}
-+
-+/** Flush EP FIFO
-+ * NOTE: INDEX register must be set before this call
-+ */
-+static void flush(struct jz4740_ep *ep)
-+{
-+ DEBUG("%s: %s\n", __FUNCTION__, ep->ep.name);
-+
-+ switch (ep->type) {
-+ case ep_bulk_in:
-+ case ep_interrupt:
-+ usb_setb(ep->dev, ep->csr, USB_INCSR_FF);
-+ break;
-+ case ep_bulk_out:
-+ usb_setb(ep->dev, ep->csr, USB_OUTCSR_FF);
-+ break;
-+ case ep_control:
-+ break;
-+ }
-+}
-+
-+/**
-+ * jz4740_in_epn - handle IN interrupt
-+ */
-+static void jz4740_in_epn(struct jz4740_udc *dev, uint32_t ep_idx, uint32_t intr)
-+{
-+ uint32_t csr;
-+ struct jz4740_ep *ep = &dev->ep[ep_idx + 1];
-+ struct jz4740_request *req;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ jz_udc_set_index(dev, ep_index(ep));
-+
-+ csr = usb_readb(dev, ep->csr);
-+ DEBUG("%s: %d, csr %x\n", __FUNCTION__, ep_idx, csr);
-+
-+ if (csr & USB_INCSR_SENTSTALL) {
-+ DEBUG("USB_INCSR_SENTSTALL\n");
-+ usb_clearb(dev, ep->csr, USB_INCSR_SENTSTALL);
-+ return;
-+ }
-+
-+ if (!ep->desc) {
-+ DEBUG("%s: NO EP DESC\n", __FUNCTION__);
-+ return;
-+ }
-+
-+ if (!list_empty(&ep->queue)) {
-+ req = list_first_entry(&ep->queue, struct jz4740_request, queue);
-+ write_fifo(ep, req);
-+ }
-+}
-+
-+/*
-+ * Bulk OUT (recv)
-+ */
-+static void jz4740_out_epn(struct jz4740_udc *dev, uint32_t ep_idx, uint32_t intr)
-+{
-+ struct jz4740_ep *ep = &dev->ep[ep_idx];
-+ struct jz4740_request *req;
-+
-+ DEBUG("%s: %d\n", __FUNCTION__, ep_idx);
-+
-+ jz_udc_select_ep(ep);
-+ if (ep->desc) {
-+ uint32_t csr;
-+
-+ if (use_dma) {
-+ /* DMA starts here ... */
-+ if (!list_empty(&ep->queue)) {
-+ req = list_first_entry(&ep->queue, struct jz4740_request, queue);
-+ read_fifo(ep, req);
-+ }
-+ return;
-+ }
-+
-+ /*
-+ * PIO mode starts here ...
-+ */
-+
-+ while ((csr = usb_readb(dev, ep->csr)) &
-+ (USB_OUTCSR_OUTPKTRDY | USB_OUTCSR_SENTSTALL)) {
-+ DEBUG("%s: %x\n", __FUNCTION__, csr);
-+
-+ if (csr & USB_OUTCSR_SENTSTALL) {
-+ DEBUG("%s: stall sent, flush fifo\n",
-+ __FUNCTION__);
-+ /* usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); */
-+ flush(ep);
-+ } else if (csr & USB_OUTCSR_OUTPKTRDY) {
-+ if (list_empty(&ep->queue))
-+ req = 0;
-+ else
-+ req =
-+ list_entry(ep->queue.next,
-+ struct jz4740_request,
-+ queue);
-+
-+ if (!req) {
-+ DEBUG("%s: NULL REQ %d\n",
-+ __FUNCTION__, ep_idx);
-+ break;
-+ } else {
-+ read_fifo(ep, req);
-+ }
-+ }
-+ }
-+ } else {
-+ /* Throw packet away.. */
-+ DEBUG("%s: ep %p ep_indx %d No descriptor?!?\n", __FUNCTION__, ep, ep_idx);
-+ flush(ep);
-+ }
-+}
-+
-+/** Halt specific EP
-+ * Return 0 if success
-+ * NOTE: Sets INDEX register to EP !
-+ */
-+static int jz4740_set_halt(struct usb_ep *_ep, int value)
-+{
-+ struct jz4740_udc *dev;
-+ struct jz4740_ep *ep;
-+ unsigned long flags;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (unlikely(!_ep || (!ep->desc && ep->type != ep_control))) {
-+ DEBUG("%s, bad ep\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ dev = ep->dev;
-+
-+ spin_lock_irqsave(&dev->lock, flags);
-+
-+ jz_udc_select_ep(ep);
-+
-+ DEBUG("%s, ep %d, val %d\n", __FUNCTION__, ep_index(ep), value);
-+
-+ if (ep_index(ep) == 0) {
-+ /* EP0 */
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SENDSTALL);
-+ } else if (ep_is_in(ep)) {
-+ uint32_t csr = usb_readb(dev, ep->csr);
-+ if (value && ((csr & USB_INCSR_FFNOTEMPT)
-+ || !list_empty(&ep->queue))) {
-+ /*
-+ * Attempts to halt IN endpoints will fail (returning -EAGAIN)
-+ * if any transfer requests are still queued, or if the controller
-+ * FIFO still holds bytes that the host hasn’t collected.
-+ */
-+ spin_unlock_irqrestore(&dev->lock, flags);
-+ DEBUG
-+ ("Attempt to halt IN endpoint failed (returning -EAGAIN) %d %d\n",
-+ (csr & USB_INCSR_FFNOTEMPT),
-+ !list_empty(&ep->queue));
-+ return -EAGAIN;
-+ }
-+ flush(ep);
-+ if (value) {
-+ usb_setb(dev, ep->csr, USB_INCSR_SENDSTALL);
-+ } else {
-+ usb_clearb(dev, ep->csr, USB_INCSR_SENDSTALL);
-+ usb_setb(dev, ep->csr, USB_INCSR_CDT);
-+ }
-+ } else {
-+
-+ flush(ep);
-+ if (value) {
-+ usb_setb(dev, ep->csr, USB_OUTCSR_SENDSTALL);
-+ } else {
-+ usb_clearb(dev, ep->csr, USB_OUTCSR_SENDSTALL);
-+ usb_setb(dev, ep->csr, USB_OUTCSR_CDT);
-+ }
-+ }
-+
-+ ep->stopped = value;
-+
-+ spin_unlock_irqrestore(&dev->lock, flags);
-+
-+ DEBUG("%s %s halted\n", _ep->name, value == 0 ? "NOT" : "IS");
-+
-+ return 0;
-+}
-+
-+
-+static int jz4740_ep_enable(struct usb_ep *_ep,
-+ const struct usb_endpoint_descriptor *desc)
-+{
-+ struct jz4740_ep *ep;
-+ struct jz4740_udc *dev;
-+ unsigned long flags;
-+ uint32_t max, csrh = 0;
-+
-+ DEBUG("%s: trying to enable %s\n", __FUNCTION__, _ep->name);
-+
-+ if (!_ep || !desc)
-+ return -EINVAL;
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (ep->desc || ep->type == ep_control
-+ || desc->bDescriptorType != USB_DT_ENDPOINT
-+ || ep->bEndpointAddress != desc->bEndpointAddress) {
-+ DEBUG("%s, bad ep or descriptor\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ /* xfer types must match, except that interrupt ~= bulk */
-+ if (ep->bmAttributes != desc->bmAttributes
-+ && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
-+ && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
-+ DEBUG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
-+ return -EINVAL;
-+ }
-+
-+ dev = ep->dev;
-+ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DEBUG("%s, bogus device state\n", __FUNCTION__);
-+ return -ESHUTDOWN;
-+ }
-+
-+ max = le16_to_cpu(desc->wMaxPacketSize);
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+
-+ /* Configure the endpoint */
-+ jz_udc_select_ep(ep);
-+ if (ep_is_in(ep)) {
-+ usb_writew(dev, JZ_REG_UDC_INMAXP, max);
-+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+ case USB_ENDPOINT_XFER_BULK:
-+ case USB_ENDPOINT_XFER_INT:
-+ csrh &= ~USB_INCSRH_ISO;
-+ break;
-+ case USB_ENDPOINT_XFER_ISOC:
-+ csrh |= USB_INCSRH_ISO;
-+ break;
-+ }
-+ usb_writeb(dev, JZ_REG_UDC_INCSRH, csrh);
-+ }
-+ else {
-+ usb_writew(dev, JZ_REG_UDC_OUTMAXP, max);
-+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+ case USB_ENDPOINT_XFER_BULK:
-+ csrh &= ~USB_OUTCSRH_ISO;
-+ break;
-+ case USB_ENDPOINT_XFER_INT:
-+ csrh &= ~USB_OUTCSRH_ISO;
-+ csrh |= USB_OUTCSRH_DNYT;
-+ break;
-+ case USB_ENDPOINT_XFER_ISOC:
-+ csrh |= USB_OUTCSRH_ISO;
-+ break;
-+ }
-+ usb_writeb(dev, JZ_REG_UDC_OUTCSRH, csrh);
-+ }
-+
-+
-+ ep->stopped = 0;
-+ ep->desc = desc;
-+ ep->ep.maxpacket = max;
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+
-+ /* Reset halt state (does flush) */
-+ jz4740_set_halt(_ep, 0);
-+
-+ DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name);
-+
-+ return 0;
-+}
-+
-+/** Disable EP
-+ * NOTE: Sets INDEX register
-+ */
-+static int jz4740_ep_disable(struct usb_ep *_ep)
-+{
-+ struct jz4740_ep *ep;
-+ unsigned long flags;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, _ep);
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (!_ep || !ep->desc) {
-+ DEBUG("%s, %s not enabled\n", __FUNCTION__,
-+ _ep ? ep->ep.name : NULL);
-+ return -EINVAL;
-+ }
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+
-+ jz_udc_select_ep(ep);
-+
-+ /* Nuke all pending requests (does flush) */
-+ nuke(ep, -ESHUTDOWN);
-+
-+ /* Disable ep IRQ */
-+ pio_irq_disable(ep);
-+
-+ ep->desc = 0;
-+ ep->stopped = 1;
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+
-+ DEBUG("%s: disabled %s\n", __FUNCTION__, _ep->name);
-+ return 0;
-+}
-+
-+static struct usb_request *jz4740_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
-+{
-+ struct jz4740_request *req;
-+
-+ req = kzalloc(sizeof(*req), gfp_flags);
-+ if (!req)
-+ return NULL;
-+
-+ INIT_LIST_HEAD(&req->queue);
-+
-+ return &req->req;
-+}
-+
-+static void jz4740_free_request(struct usb_ep *ep, struct usb_request *_req)
-+{
-+ struct jz4740_request *req;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, ep);
-+
-+ req = container_of(_req, struct jz4740_request, req);
-+ WARN_ON(!list_empty(&req->queue));
-+ kfree(req);
-+}
-+
-+/*--------------------------------------------------------------------*/
-+
-+/** Queue one request
-+ * Kickstart transfer if needed
-+ * NOTE: Sets INDEX register
-+ */
-+static int jz4740_queue(struct usb_ep *_ep, struct usb_request *_req,
-+ gfp_t gfp_flags)
-+{
-+ struct jz4740_request *req;
-+ struct jz4740_ep *ep;
-+ struct jz4740_udc *dev;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, _ep);
-+
-+ req = container_of(_req, struct jz4740_request, req);
-+ if (unlikely
-+ (!_req || !_req->complete || !_req->buf
-+ || !list_empty(&req->queue))) {
-+ DEBUG("%s, bad params\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (unlikely(!_ep || (!ep->desc && ep->type != ep_control))) {
-+ DEBUG("%s, bad ep\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ dev = ep->dev;
-+ if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
-+ DEBUG("%s, bogus device state %p\n", __FUNCTION__, dev->driver);
-+ return -ESHUTDOWN;
-+ }
-+
-+ DEBUG("%s queue req %p, len %d buf %p\n", _ep->name, _req, _req->length,
-+ _req->buf);
-+
-+ spin_lock_irqsave(&dev->lock, dev->lock_flags);
-+
-+ _req->status = -EINPROGRESS;
-+ _req->actual = 0;
-+
-+ /* kickstart this i/o queue? */
-+ DEBUG("Add to %d Q %d %d\n", ep_index(ep), list_empty(&ep->queue),
-+ ep->stopped);
-+ if (list_empty(&ep->queue) && likely(!ep->stopped)) {
-+ uint32_t csr;
-+
-+ if (unlikely(ep_index(ep) == 0)) {
-+ /* EP0 */
-+ list_add_tail(&req->queue, &ep->queue);
-+ jz4740_ep0_kick(dev, ep);
-+ req = 0;
-+ } else if (use_dma) {
-+ /* DMA */
-+ kick_dma(ep, req);
-+ }
-+ /* PIO */
-+ else if (ep_is_in(ep)) {
-+ /* EP1 & EP2 */
-+ jz_udc_select_ep(ep);
-+ csr = usb_readb(dev, ep->csr);
-+ pio_irq_enable(ep);
-+ if (!(csr & USB_INCSR_FFNOTEMPT)) {
-+ if (write_fifo(ep, req) == 1)
-+ req = 0;
-+ }
-+ } else {
-+ /* EP1 */
-+ jz_udc_select_ep(ep);
-+ csr = usb_readb(dev, ep->csr);
-+ pio_irq_enable(ep);
-+ if (csr & USB_OUTCSR_OUTPKTRDY) {
-+ if (read_fifo(ep, req) == 1)
-+ req = 0;
-+ }
-+ }
-+ }
-+
-+ /* pio or dma irq handler advances the queue. */
-+ if (likely(req != 0))
-+ list_add_tail(&req->queue, &ep->queue);
-+
-+ spin_unlock_irqrestore(&dev->lock, dev->lock_flags);
-+
-+ return 0;
-+}
-+
-+/* dequeue JUST ONE request */
-+static int jz4740_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+ struct jz4740_ep *ep;
-+ struct jz4740_request *req;
-+ unsigned long flags;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, _ep);
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (!_ep || ep->type == ep_control)
-+ return -EINVAL;
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+
-+ /* make sure it's actually queued on this endpoint */
-+ list_for_each_entry(req, &ep->queue, queue) {
-+ if (&req->req == _req)
-+ break;
-+ }
-+ if (&req->req != _req) {
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+ return -EINVAL;
-+ }
-+ done(ep, req, -ECONNRESET);
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+ return 0;
-+}
-+
-+/** Return bytes in EP FIFO
-+ * NOTE: Sets INDEX register to EP
-+ */
-+static int jz4740_fifo_status(struct usb_ep *_ep)
-+{
-+ uint32_t csr;
-+ int count = 0;
-+ struct jz4740_ep *ep;
-+ unsigned long flags;
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (!_ep) {
-+ DEBUG("%s, bad ep\n", __FUNCTION__);
-+ return -ENODEV;
-+ }
-+
-+ DEBUG("%s, %d\n", __FUNCTION__, ep_index(ep));
-+
-+ /* LPD can't report unclaimed bytes from IN fifos */
-+ if (ep_is_in(ep))
-+ return -EOPNOTSUPP;
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+ jz_udc_select_ep(ep);
-+
-+ csr = usb_readb(ep->dev, ep->csr);
-+ if (ep->dev->gadget.speed != USB_SPEED_UNKNOWN ||
-+ csr & 0x1) {
-+ count = usb_readw(ep->dev, JZ_REG_UDC_OUTCOUNT);
-+ }
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+
-+ return count;
-+}
-+
-+/** Flush EP FIFO
-+ * NOTE: Sets INDEX register to EP
-+ */
-+static void jz4740_fifo_flush(struct usb_ep *_ep)
-+{
-+ struct jz4740_ep *ep;
-+ unsigned long flags;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (unlikely(!_ep || (!ep->desc && ep->type == ep_control))) {
-+ DEBUG("%s, bad ep\n", __FUNCTION__);
-+ return;
-+ }
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+
-+ jz_udc_select_ep(ep);
-+ flush(ep);
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+}
-+
-+/****************************************************************/
-+/* End Point 0 related functions */
-+/****************************************************************/
-+
-+/* return: 0 = still running, 1 = completed, negative = errno */
-+static int write_fifo_ep0(struct jz4740_ep *ep, struct jz4740_request *req)
-+{
-+ uint32_t max;
-+ unsigned count;
-+ int is_last;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+ max = ep_maxpacket(ep);
-+
-+ count = write_packet(ep, req, max);
-+
-+ /* last packet is usually short (or a zlp) */
-+ if (unlikely(count != max))
-+ is_last = 1;
-+ else {
-+ if (likely(req->req.length != req->req.actual) || req->req.zero)
-+ is_last = 0;
-+ else
-+ is_last = 1;
-+ }
-+
-+ DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __FUNCTION__,
-+ ep->ep.name, count,
-+ is_last ? "/L" : "", req->req.length - req->req.actual, req);
-+
-+ /* requests complete when all IN data is in the FIFO */
-+ if (is_last) {
-+ done(ep, req, 0);
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
-+static inline int jz4740_fifo_read(struct jz4740_ep *ep,
-+ unsigned char *cp, int max)
-+{
-+ int bytes;
-+ int count = usb_readw(ep->dev, JZ_REG_UDC_OUTCOUNT);
-+
-+ if (count > max)
-+ count = max;
-+ bytes = count;
-+ while (count--)
-+ *cp++ = usb_readb(ep->dev, ep->fifo);
-+
-+ return bytes;
-+}
-+
-+static inline void jz4740_fifo_write(struct jz4740_ep *ep,
-+ unsigned char *cp, int count)
-+{
-+ DEBUG("fifo_write: %d %d\n", ep_index(ep), count);
-+ while (count--)
-+ usb_writeb(ep->dev, ep->fifo, *cp++);
-+}
-+
-+static int read_fifo_ep0(struct jz4740_ep *ep, struct jz4740_request *req)
-+{
-+ struct jz4740_udc *dev = ep->dev;
-+ uint32_t csr;
-+ uint8_t *buf;
-+ unsigned bufferspace, count, is_short;
-+
-+ DEBUG_EP0("%s\n", __FUNCTION__);
-+
-+ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
-+ if (!(csr & USB_CSR0_OUTPKTRDY))
-+ return 0;
-+
-+ buf = req->req.buf + req->req.actual;
-+ prefetchw(buf);
-+ bufferspace = req->req.length - req->req.actual;
-+
-+ /* read all bytes from this packet */
-+ if (likely(csr & USB_CSR0_OUTPKTRDY)) {
-+ count = usb_readw(dev, JZ_REG_UDC_OUTCOUNT);
-+ req->req.actual += min(count, bufferspace);
-+ } else /* zlp */
-+ count = 0;
-+
-+ is_short = (count < ep->ep.maxpacket);
-+ DEBUG_EP0("read %s %02x, %d bytes%s req %p %d/%d\n",
-+ ep->ep.name, csr, count,
-+ is_short ? "/S" : "", req, req->req.actual, req->req.length);
-+
-+ while (likely(count-- != 0)) {
-+ uint8_t byte = (uint8_t)usb_readl(dev, ep->fifo);
-+
-+ if (unlikely(bufferspace == 0)) {
-+ /* this happens when the driver's buffer
-+ * is smaller than what the host sent.
-+ * discard the extra data.
-+ */
-+ if (req->req.status != -EOVERFLOW)
-+ DEBUG_EP0("%s overflow %d\n", ep->ep.name,
-+ count);
-+ req->req.status = -EOVERFLOW;
-+ } else {
-+ *buf++ = byte;
-+ bufferspace--;
-+ }
-+ }
-+
-+ /* completion */
-+ if (is_short || req->req.actual == req->req.length) {
-+ done(ep, req, 0);
-+ return 1;
-+ }
-+
-+ /* finished that packet. the next one may be waiting... */
-+ return 0;
-+}
-+
-+/**
-+ * udc_set_address - set the USB address for this device
-+ * @address:
-+ *
-+ * Called from control endpoint function after it decodes a set address setup packet.
-+ */
-+static void udc_set_address(struct jz4740_udc *dev, unsigned char address)
-+{
-+ DEBUG_EP0("%s: %d\n", __FUNCTION__, address);
-+
-+ usb_writeb(dev, JZ_REG_UDC_FADDR, address);
-+}
-+
-+/*
-+ * DATA_STATE_RECV (USB_CSR0_OUTPKTRDY)
-+ * - if error
-+ * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL bits
-+ * - else
-+ * set USB_CSR0_SVDOUTPKTRDY bit
-+ if last set USB_CSR0_DATAEND bit
-+ */
-+static void jz4740_ep0_out(struct jz4740_udc *dev, uint32_t csr, int kickstart)
-+{
-+ struct jz4740_request *req;
-+ struct jz4740_ep *ep = &dev->ep[0];
-+ int ret;
-+
-+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
-+
-+ if (list_empty(&ep->queue))
-+ req = 0;
-+ else
-+ req = list_entry(ep->queue.next, struct jz4740_request, queue);
-+
-+ if (req) {
-+ if (req->req.length == 0) {
-+ DEBUG_EP0("ZERO LENGTH OUT!\n");
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ return;
-+ } else if (kickstart) {
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY));
-+ return;
-+ }
-+ ret = read_fifo_ep0(ep, req);
-+ if (ret) {
-+ /* Done! */
-+ DEBUG_EP0("%s: finished, waiting for status\n",
-+ __FUNCTION__);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ } else {
-+ /* Not done yet.. */
-+ DEBUG_EP0("%s: not finished\n", __FUNCTION__);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
-+ }
-+ } else {
-+ DEBUG_EP0("NO REQ??!\n");
-+ }
-+}
-+
-+/*
-+ * DATA_STATE_XMIT
-+ */
-+static int jz4740_ep0_in(struct jz4740_udc *dev, uint32_t csr)
-+{
-+ struct jz4740_request *req;
-+ struct jz4740_ep *ep = &dev->ep[0];
-+ int ret, need_zlp = 0;
-+
-+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
-+
-+ if (list_empty(&ep->queue))
-+ req = 0;
-+ else
-+ req = list_entry(ep->queue.next, struct jz4740_request, queue);
-+
-+ if (!req) {
-+ DEBUG_EP0("%s: NULL REQ\n", __FUNCTION__);
-+ return 0;
-+ }
-+
-+ if (req->req.length == 0) {
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ return 1;
-+ }
-+
-+ if (req->req.length - req->req.actual == EP0_MAXPACKETSIZE) {
-+ /* Next write will end with the packet size, */
-+ /* so we need zero-length-packet */
-+ need_zlp = 1;
-+ }
-+
-+ ret = write_fifo_ep0(ep, req);
-+
-+ if (ret == 1 && !need_zlp) {
-+ /* Last packet */
-+ DEBUG_EP0("%s: finished, waiting for status\n", __FUNCTION__);
-+
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ } else {
-+ DEBUG_EP0("%s: not finished\n", __FUNCTION__);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_INPKTRDY);
-+ }
-+
-+ if (need_zlp) {
-+ DEBUG_EP0("%s: Need ZLP!\n", __FUNCTION__);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_INPKTRDY);
-+ dev->ep0state = DATA_STATE_NEED_ZLP;
-+ }
-+
-+ return 1;
-+}
-+
-+static int jz4740_handle_get_status(struct jz4740_udc *dev,
-+ struct usb_ctrlrequest *ctrl)
-+{
-+ struct jz4740_ep *ep0 = &dev->ep[0];
-+ struct jz4740_ep *qep;
-+ int reqtype = (ctrl->bRequestType & USB_RECIP_MASK);
-+ uint16_t val = 0;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ if (reqtype == USB_RECIP_INTERFACE) {
-+ /* This is not supported.
-+ * And according to the USB spec, this one does nothing..
-+ * Just return 0
-+ */
-+ DEBUG_SETUP("GET_STATUS: USB_RECIP_INTERFACE\n");
-+ } else if (reqtype == USB_RECIP_DEVICE) {
-+ DEBUG_SETUP("GET_STATUS: USB_RECIP_DEVICE\n");
-+ val |= (1 << 0); /* Self powered */
-+ /*val |= (1<<1); *//* Remote wakeup */
-+ } else if (reqtype == USB_RECIP_ENDPOINT) {
-+ int ep_num = (ctrl->wIndex & ~USB_DIR_IN);
-+
-+ DEBUG_SETUP
-+ ("GET_STATUS: USB_RECIP_ENDPOINT (%d), ctrl->wLength = %d\n",
-+ ep_num, ctrl->wLength);
-+
-+ if (ctrl->wLength > 2 || ep_num > 3)
-+ return -EOPNOTSUPP;
-+
-+ qep = &dev->ep[ep_num];
-+ if (ep_is_in(qep) != ((ctrl->wIndex & USB_DIR_IN) ? 1 : 0)
-+ && ep_index(qep) != 0) {
-+ return -EOPNOTSUPP;
-+ }
-+
-+ jz_udc_set_index(dev, ep_index(qep));
-+
-+ /* Return status on next IN token */
-+ switch (qep->type) {
-+ case ep_control:
-+ val =
-+ (usb_readb(dev, qep->csr) & USB_CSR0_SENDSTALL) ==
-+ USB_CSR0_SENDSTALL;
-+ break;
-+ case ep_bulk_in:
-+ case ep_interrupt:
-+ val =
-+ (usb_readb(dev, qep->csr) & USB_INCSR_SENDSTALL) ==
-+ USB_INCSR_SENDSTALL;
-+ break;
-+ case ep_bulk_out:
-+ val =
-+ (usb_readb(dev, qep->csr) & USB_OUTCSR_SENDSTALL) ==
-+ USB_OUTCSR_SENDSTALL;
-+ break;
-+ }
-+
-+ /* Back to EP0 index */
-+ jz_udc_set_index(dev, 0);
-+
-+ DEBUG_SETUP("GET_STATUS, ep: %d (%x), val = %d\n", ep_num,
-+ ctrl->wIndex, val);
-+ } else {
-+ DEBUG_SETUP("Unknown REQ TYPE: %d\n", reqtype);
-+ return -EOPNOTSUPP;
-+ }
-+
-+ /* Clear "out packet ready" */
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
-+ /* Put status to FIFO */
-+ jz4740_fifo_write(ep0, (uint8_t *)&val, sizeof(val));
-+ /* Issue "In packet ready" */
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
-+
-+ return 0;
-+}
-+
-+/*
-+ * WAIT_FOR_SETUP (OUTPKTRDY)
-+ * - read data packet from EP0 FIFO
-+ * - decode command
-+ * - if error
-+ * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL bits
-+ * - else
-+ * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND bits
-+ */
-+static void jz4740_ep0_setup(struct jz4740_udc *dev, uint32_t csr)
-+{
-+ struct jz4740_ep *ep = &dev->ep[0];
-+ struct usb_ctrlrequest ctrl;
-+ int i;
-+
-+ DEBUG_SETUP("%s: %x\n", __FUNCTION__, csr);
-+
-+ /* Nuke all previous transfers */
-+ nuke(ep, -EPROTO);
-+
-+ /* read control req from fifo (8 bytes) */
-+ jz4740_fifo_read(ep, (unsigned char *)&ctrl, 8);
-+
-+ DEBUG_SETUP("SETUP %02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bRequestType, ctrl.bRequest,
-+ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-+
-+ /* Set direction of EP0 */
-+ if (likely(ctrl.bRequestType & USB_DIR_IN)) {
-+ ep->bEndpointAddress |= USB_DIR_IN;
-+ } else {
-+ ep->bEndpointAddress &= ~USB_DIR_IN;
-+ }
-+
-+ /* Handle some SETUP packets ourselves */
-+ switch (ctrl.bRequest) {
-+ case USB_REQ_SET_ADDRESS:
-+ if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
-+ break;
-+
-+ DEBUG_SETUP("USB_REQ_SET_ADDRESS (%d)\n", ctrl.wValue);
-+ udc_set_address(dev, ctrl.wValue);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
-+ return;
-+
-+ case USB_REQ_SET_CONFIGURATION:
-+ if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
-+ break;
-+
-+ DEBUG_SETUP("USB_REQ_SET_CONFIGURATION (%d)\n", ctrl.wValue);
-+/* usb_setb(JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));*/
-+
-+ /* Enable RESUME and SUSPEND interrupts */
-+ usb_setb(dev, JZ_REG_UDC_INTRUSBE, (USB_INTR_RESUME | USB_INTR_SUSPEND));
-+ break;
-+
-+ case USB_REQ_SET_INTERFACE:
-+ if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
-+ break;
-+
-+ DEBUG_SETUP("USB_REQ_SET_INTERFACE (%d)\n", ctrl.wValue);
-+/* usb_setb(JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));*/
-+ break;
-+
-+ case USB_REQ_GET_STATUS:
-+ if (jz4740_handle_get_status(dev, &ctrl) == 0)
-+ return;
-+
-+ case USB_REQ_CLEAR_FEATURE:
-+ case USB_REQ_SET_FEATURE:
-+ if (ctrl.bRequestType == USB_RECIP_ENDPOINT) {
-+ struct jz4740_ep *qep;
-+ int ep_num = (ctrl.wIndex & 0x0f);
-+
-+ /* Support only HALT feature */
-+ if (ctrl.wValue != 0 || ctrl.wLength != 0
-+ || ep_num > 3 || ep_num < 1)
-+ break;
-+
-+ qep = &dev->ep[ep_num];
-+ spin_unlock(&dev->lock);
-+ if (ctrl.bRequest == USB_REQ_SET_FEATURE) {
-+ DEBUG_SETUP("SET_FEATURE (%d)\n",
-+ ep_num);
-+ jz4740_set_halt(&qep->ep, 1);
-+ } else {
-+ DEBUG_SETUP("CLR_FEATURE (%d)\n",
-+ ep_num);
-+ jz4740_set_halt(&qep->ep, 0);
-+ }
-+ spin_lock(&dev->lock);
-+
-+ jz_udc_set_index(dev, 0);
-+
-+ /* Reply with a ZLP on next IN token */
-+ usb_setb(dev, JZ_REG_UDC_CSR0,
-+ (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
-+ return;
-+ }
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ /* gadget drivers see class/vendor specific requests,
-+ * {SET,GET}_{INTERFACE,DESCRIPTOR,CONFIGURATION},
-+ * and more.
-+ */
-+ if (dev->driver) {
-+ /* device-2-host (IN) or no data setup command, process immediately */
-+ spin_unlock(&dev->lock);
-+
-+ i = dev->driver->setup(&dev->gadget, &ctrl);
-+ spin_lock(&dev->lock);
-+
-+ if (unlikely(i < 0)) {
-+ /* setup processing failed, force stall */
-+ DEBUG_SETUP
-+ (" --> ERROR: gadget setup FAILED (stalling), setup returned %d\n",
-+ i);
-+ jz_udc_set_index(dev, 0);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL));
-+
-+ /* ep->stopped = 1; */
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ }
-+ else {
-+ DEBUG_SETUP("gadget driver setup ok (%d)\n", ctrl.wLength);
-+/* if (!ctrl.wLength) {
-+ usb_setb(JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
-+ }*/
-+ }
-+ }
-+}
-+
-+/*
-+ * DATA_STATE_NEED_ZLP
-+ */
-+static void jz4740_ep0_in_zlp(struct jz4740_udc *dev, uint32_t csr)
-+{
-+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
-+
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+}
-+
-+/*
-+ * handle ep0 interrupt
-+ */
-+static void jz4740_handle_ep0(struct jz4740_udc *dev, uint32_t intr)
-+{
-+ struct jz4740_ep *ep = &dev->ep[0];
-+ uint32_t csr;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+ /* Set index 0 */
-+ jz_udc_set_index(dev, 0);
-+ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
-+
-+ DEBUG_EP0("%s: csr = %x state = \n", __FUNCTION__, csr);//, state_names[dev->ep0state]);
-+
-+ /*
-+ * if SENT_STALL is set
-+ * - clear the SENT_STALL bit
-+ */
-+ if (csr & USB_CSR0_SENTSTALL) {
-+ DEBUG_EP0("%s: USB_CSR0_SENTSTALL is set: %x\n", __FUNCTION__, csr);
-+ usb_clearb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SENDSTALL | USB_CSR0_SENTSTALL);
-+ nuke(ep, -ECONNABORTED);
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ return;
-+ }
-+
-+ /*
-+ * if a transfer is in progress && INPKTRDY and OUTPKTRDY are clear
-+ * - fill EP0 FIFO
-+ * - if last packet
-+ * - set IN_PKT_RDY | DATA_END
-+ * - else
-+ * set IN_PKT_RDY
-+ */
-+ if (!(csr & (USB_CSR0_INPKTRDY | USB_CSR0_OUTPKTRDY))) {
-+ DEBUG_EP0("%s: INPKTRDY and OUTPKTRDY are clear\n",
-+ __FUNCTION__);
-+
-+ switch (dev->ep0state) {
-+ case DATA_STATE_XMIT:
-+ DEBUG_EP0("continue with DATA_STATE_XMIT\n");
-+ jz4740_ep0_in(dev, csr);
-+ return;
-+ case DATA_STATE_NEED_ZLP:
-+ DEBUG_EP0("continue with DATA_STATE_NEED_ZLP\n");
-+ jz4740_ep0_in_zlp(dev, csr);
-+ return;
-+ default:
-+ /* Stall? */
-+// DEBUG_EP0("Odd state!! state = %s\n",
-+// state_names[dev->ep0state]);
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ /* nuke(ep, 0); */
-+ /* usb_setb(ep->csr, USB_CSR0_SENDSTALL); */
-+// break;
-+ return;
-+ }
-+ }
-+
-+ /*
-+ * if SETUPEND is set
-+ * - abort the last transfer
-+ * - set SERVICED_SETUP_END_BIT
-+ */
-+ if (csr & USB_CSR0_SETUPEND) {
-+ DEBUG_EP0("%s: USB_CSR0_SETUPEND is set: %x\n", __FUNCTION__, csr);
-+
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDSETUPEND);
-+ nuke(ep, 0);
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ }
-+
-+ /*
-+ * if USB_CSR0_OUTPKTRDY is set
-+ * - read data packet from EP0 FIFO
-+ * - decode command
-+ * - if error
-+ * set SVDOUTPKTRDY | DATAEND | SENDSTALL bits
-+ * - else
-+ * set SVDOUTPKTRDY | DATAEND bits
-+ */
-+ if (csr & USB_CSR0_OUTPKTRDY) {
-+
-+ DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __FUNCTION__,
-+ csr);
-+
-+ switch (dev->ep0state) {
-+ case WAIT_FOR_SETUP:
-+ DEBUG_EP0("WAIT_FOR_SETUP\n");
-+ jz4740_ep0_setup(dev, csr);
-+ break;
-+
-+ case DATA_STATE_RECV:
-+ DEBUG_EP0("DATA_STATE_RECV\n");
-+ jz4740_ep0_out(dev, csr, 0);
-+ break;
-+
-+ default:
-+ /* send stall? */
-+ DEBUG_EP0("strange state!! 2. send stall? state = %d\n",
-+ dev->ep0state);
-+ break;
-+ }
-+ }
-+}
-+
-+static void jz4740_ep0_kick(struct jz4740_udc *dev, struct jz4740_ep *ep)
-+{
-+ uint32_t csr;
-+
-+ jz_udc_set_index(dev, 0);
-+
-+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
-+
-+ /* Clear "out packet ready" */
-+
-+ if (ep_is_in(ep)) {
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
-+ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
-+ dev->ep0state = DATA_STATE_XMIT;
-+ jz4740_ep0_in(dev, csr);
-+ } else {
-+ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
-+ dev->ep0state = DATA_STATE_RECV;
-+ jz4740_ep0_out(dev, csr, 1);
-+ }
-+}
-+
-+/** Handle USB RESET interrupt
-+ */
-+static void jz4740_reset_irq(struct jz4740_udc *dev)
-+{
-+ dev->gadget.speed = (usb_readb(dev, JZ_REG_UDC_POWER) & USB_POWER_HSMODE) ?
-+ USB_SPEED_HIGH : USB_SPEED_FULL;
-+
-+ DEBUG_SETUP("%s: address = %d, speed = %s\n", __FUNCTION__, 0,
-+ (dev->gadget.speed == USB_SPEED_HIGH) ? "HIGH":"FULL" );
-+}
-+
-+/*
-+ * jz4740 usb device interrupt handler.
-+ */
-+static irqreturn_t jz4740_udc_irq(int irq, void *devid)
-+{
-+ struct jz4740_udc *jz4740_udc = devid;
-+ uint8_t index;
-+
-+ uint32_t intr_usb = usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSB) & 0x7; /* mask SOF */
-+ uint32_t intr_in = usb_readw(jz4740_udc, JZ_REG_UDC_INTRIN);
-+ uint32_t intr_out = usb_readw(jz4740_udc, JZ_REG_UDC_INTROUT);
-+ uint32_t intr_dma = usb_readb(jz4740_udc, JZ_REG_UDC_INTR);
-+
-+ if (!intr_usb && !intr_in && !intr_out && !intr_dma)
-+ return IRQ_HANDLED;
-+
-+
-+ DEBUG("intr_out=%x intr_in=%x intr_usb=%x\n",
-+ intr_out, intr_in, intr_usb);
-+
-+ spin_lock(&jz4740_udc->lock);
-+ index = usb_readb(jz4740_udc, JZ_REG_UDC_INDEX);
-+
-+ /* Check for resume from suspend mode */
-+ if ((intr_usb & USB_INTR_RESUME) &&
-+ (usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSBE) & USB_INTR_RESUME)) {
-+ DEBUG("USB resume\n");
-+ jz4740_udc->driver->resume(&jz4740_udc->gadget); /* We have suspend(), so we must have resume() too. */
-+ }
-+
-+ /* Check for system interrupts */
-+ if (intr_usb & USB_INTR_RESET) {
-+ DEBUG("USB reset\n");
-+ jz4740_reset_irq(jz4740_udc);
-+ }
-+
-+ /* Check for endpoint 0 interrupt */
-+ if (intr_in & USB_INTR_EP0) {
-+ DEBUG("USB_INTR_EP0 (control)\n");
-+ jz4740_handle_ep0(jz4740_udc, intr_in);
-+ }
-+
-+ /* Check for Bulk-IN DMA interrupt */
-+ if (intr_dma & 0x1) {
-+ int ep_num;
-+ struct jz4740_ep *ep;
-+ ep_num = (usb_readl(jz4740_udc, JZ_REG_UDC_CNTL1) >> 4) & 0xf;
-+ ep = &jz4740_udc->ep[ep_num + 1];
-+ jz_udc_set_index(jz4740_udc, ep_num);
-+ usb_setb(jz4740_udc, ep->csr, USB_INCSR_INPKTRDY);
-+/* jz4740_in_epn(jz4740_udc, ep_num, intr_in);*/
-+ }
-+
-+ /* Check for Bulk-OUT DMA interrupt */
-+ if (intr_dma & 0x2) {
-+ int ep_num;
-+ ep_num = (usb_readl(jz4740_udc, JZ_REG_UDC_CNTL2) >> 4) & 0xf;
-+ jz4740_out_epn(jz4740_udc, ep_num, intr_out);
-+ }
-+
-+ /* Check for each configured endpoint interrupt */
-+ if (intr_in & USB_INTR_INEP1) {
-+ DEBUG("USB_INTR_INEP1\n");
-+ jz4740_in_epn(jz4740_udc, 1, intr_in);
-+ }
-+
-+ if (intr_in & USB_INTR_INEP2) {
-+ DEBUG("USB_INTR_INEP2\n");
-+ jz4740_in_epn(jz4740_udc, 2, intr_in);
-+ }
-+
-+ if (intr_out & USB_INTR_OUTEP1) {
-+ DEBUG("USB_INTR_OUTEP1\n");
-+ jz4740_out_epn(jz4740_udc, 1, intr_out);
-+ }
-+
-+ /* Check for suspend mode */
-+ if ((intr_usb & USB_INTR_SUSPEND) &&
-+ (usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSBE) & USB_INTR_SUSPEND)) {
-+ DEBUG("USB suspend\n");
-+ jz4740_udc->driver->suspend(&jz4740_udc->gadget);
-+ /* Host unloaded from us, can do something, such as flushing
-+ the NAND block cache etc. */
-+ }
-+
-+ jz_udc_set_index(jz4740_udc, index);
-+
-+ spin_unlock(&jz4740_udc->lock);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+
-+static inline struct jz4740_udc *gadget_to_udc(struct usb_gadget *gadget)
-+{
-+ return container_of(gadget, struct jz4740_udc, gadget);
-+}
-+
-+static int jz4740_udc_get_frame(struct usb_gadget *_gadget)
-+{
-+ DEBUG("%s, %p\n", __FUNCTION__, _gadget);
-+ return usb_readw(gadget_to_udc(_gadget), JZ_REG_UDC_FRAME);
-+}
-+
-+static int jz4740_udc_wakeup(struct usb_gadget *_gadget)
-+{
-+ /* host may not have enabled remote wakeup */
-+ /*if ((UDCCS0 & UDCCS0_DRWF) == 0)
-+ return -EHOSTUNREACH;
-+ udc_set_mask_UDCCR(UDCCR_RSM); */
-+ return -ENOTSUPP;
-+}
-+
-+static int jz4740_udc_pullup(struct usb_gadget *_gadget, int on)
-+{
-+ struct jz4740_udc *udc = gadget_to_udc(_gadget);
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ if (on) {
-+ udc->state = UDC_STATE_ENABLE;
-+ udc_enable(udc);
-+ } else {
-+ udc->state = UDC_STATE_DISABLE;
-+ udc_disable(udc);
-+ }
-+
-+ local_irq_restore(flags);
-+
-+ return 0;
-+}
-+
-+
-+static const struct usb_gadget_ops jz4740_udc_ops = {
-+ .get_frame = jz4740_udc_get_frame,
-+ .wakeup = jz4740_udc_wakeup,
-+ .pullup = jz4740_udc_pullup,
-+};
-+
-+static struct usb_ep_ops jz4740_ep_ops = {
-+ .enable = jz4740_ep_enable,
-+ .disable = jz4740_ep_disable,
-+
-+ .alloc_request = jz4740_alloc_request,
-+ .free_request = jz4740_free_request,
-+
-+ .queue = jz4740_queue,
-+ .dequeue = jz4740_dequeue,
-+
-+ .set_halt = jz4740_set_halt,
-+ .fifo_status = jz4740_fifo_status,
-+ .fifo_flush = jz4740_fifo_flush,
-+};
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static struct jz4740_udc jz4740_udc_controller = {
-+ .gadget = {
-+ .ops = &jz4740_udc_ops,
-+ .ep0 = &jz4740_udc_controller.ep[0].ep,
-+ .name = "jz4740-udc",
-+ .dev = {
-+ .init_name = "gadget",
-+ },
-+ },
-+
-+ /* control endpoint */
-+ .ep[0] = {
-+ .ep = {
-+ .name = "ep0",
-+ .ops = &jz4740_ep_ops,
-+ .maxpacket = EP0_MAXPACKETSIZE,
-+ },
-+ .dev = &jz4740_udc_controller,
-+
-+ .bEndpointAddress = 0,
-+ .bmAttributes = 0,
-+
-+ .type = ep_control,
-+ .fifo = JZ_REG_UDC_EP_FIFO(0),
-+ .csr = JZ_REG_UDC_CSR0,
-+ },
-+
-+ /* bulk out endpoint */
-+ .ep[1] = {
-+ .ep = {
-+ .name = "ep1out-bulk",
-+ .ops = &jz4740_ep_ops,
-+ .maxpacket = EPBULK_MAXPACKETSIZE,
-+ },
-+ .dev = &jz4740_udc_controller,
-+
-+ .bEndpointAddress = 1,
-+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
-+
-+ .type = ep_bulk_out,
-+ .fifo = JZ_REG_UDC_EP_FIFO(1),
-+ .csr = JZ_REG_UDC_OUTCSR,
-+ },
-+
-+ /* bulk in endpoint */
-+ .ep[2] = {
-+ .ep = {
-+ .name = "ep1in-bulk",
-+ .ops = &jz4740_ep_ops,
-+ .maxpacket = EPBULK_MAXPACKETSIZE,
-+ },
-+ .dev = &jz4740_udc_controller,
-+
-+ .bEndpointAddress = 1 | USB_DIR_IN,
-+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
-+
-+ .type = ep_bulk_in,
-+ .fifo = JZ_REG_UDC_EP_FIFO(1),
-+ .csr = JZ_REG_UDC_INCSR,
-+ },
-+
-+ /* interrupt in endpoint */
-+ .ep[3] = {
-+ .ep = {
-+ .name = "ep2in-int",
-+ .ops = &jz4740_ep_ops,
-+ .maxpacket = EPINTR_MAXPACKETSIZE,
-+ },
-+ .dev = &jz4740_udc_controller,
-+
-+ .bEndpointAddress = 2 | USB_DIR_IN,
-+ .bmAttributes = USB_ENDPOINT_XFER_INT,
-+
-+ .type = ep_interrupt,
-+ .fifo = JZ_REG_UDC_EP_FIFO(2),
-+ .csr = JZ_REG_UDC_INCSR,
-+ },
-+};
-+
-+static int __devinit jz4740_udc_probe(struct platform_device *pdev)
-+{
-+ struct jz4740_udc *jz4740_udc = &jz4740_udc_controller;
-+ int ret;
-+
-+ spin_lock_init(&jz4740_udc->lock);
-+
-+ jz4740_udc->dev = &pdev->dev;
-+ jz4740_udc->gadget.dev.parent = &pdev->dev;
-+ jz4740_udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
-+
-+ ret = device_register(&jz4740_udc->gadget.dev);
-+ if (ret)
-+ return ret;
-+
-+ jz4740_udc->clk = clk_get(&pdev->dev, "udc");
-+ if (IS_ERR(jz4740_udc->clk)) {
-+ ret = PTR_ERR(jz4740_udc->clk);
-+ dev_err(&pdev->dev, "Failed to get udc clock: %d\n", ret);
-+ goto err_device_unregister;
-+ }
-+
-+ platform_set_drvdata(pdev, jz4740_udc);
-+
-+ jz4740_udc->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ if (!jz4740_udc->mem) {
-+ ret = -ENOENT;
-+ dev_err(&pdev->dev, "Failed to get mmio memory resource\n");
-+ goto err_clk_put;
-+ }
-+
-+ jz4740_udc->mem = request_mem_region(jz4740_udc->mem->start,
-+ resource_size(jz4740_udc->mem), pdev->name);
-+
-+ if (!jz4740_udc->mem) {
-+ ret = -EBUSY;
-+ dev_err(&pdev->dev, "Failed to request mmio memory region\n");
-+ goto err_device_unregister;
-+ }
-+
-+ jz4740_udc->base = ioremap(jz4740_udc->mem->start, resource_size(jz4740_udc->mem));
-+
-+ if (!jz4740_udc->base) {
-+ ret = -EBUSY;
-+ dev_err(&pdev->dev, "Failed to ioremap mmio memory\n");
-+ goto err_release_mem_region;
-+ }
-+
-+ jz4740_udc->irq = platform_get_irq(pdev, 0);
-+ ret = request_irq(jz4740_udc->irq, jz4740_udc_irq, 0, pdev->name,
-+ jz4740_udc);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
-+ goto err_iounmap;
-+ }
-+
-+ udc_disable(jz4740_udc);
-+ udc_reinit(jz4740_udc);
-+
-+ return 0;
-+
-+err_iounmap:
-+ iounmap(jz4740_udc->base);
-+err_release_mem_region:
-+ release_mem_region(jz4740_udc->mem->start, resource_size(jz4740_udc->mem));
-+err_clk_put:
-+ clk_put(jz4740_udc->clk);
-+err_device_unregister:
-+ device_unregister(&jz4740_udc->gadget.dev);
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return ret;
-+}
-+
-+static int __devexit jz4740_udc_remove(struct platform_device *pdev)
-+{
-+ struct jz4740_udc *dev = platform_get_drvdata(pdev);
-+
-+ if (dev->driver)
-+ return -EBUSY;
-+
-+ udc_disable(dev);
-+
-+ free_irq(dev->irq, dev);
-+ iounmap(dev->base);
-+ release_mem_region(dev->mem->start, resource_size(dev->mem));
-+ clk_put(dev->clk);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ device_unregister(&dev->gadget.dev);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int jz4740_udc_suspend(struct device *dev)
-+{
-+ struct jz4740_udc *jz4740_udc = dev_get_drvdata(dev);
-+
-+ if (jz4740_udc->state == UDC_STATE_ENABLE)
-+ udc_disable(jz4740_udc);
-+
-+ return 0;
-+}
-+
-+static int jz4740_udc_resume(struct device *dev)
-+{
-+ struct jz4740_udc *jz4740_udc = dev_get_drvdata(dev);
-+
-+ if (jz4740_udc->state == UDC_STATE_ENABLE)
-+ udc_enable(jz4740_udc);
-+
-+ return 0;
-+}
-+
-+static const struct dev_pm_ops jz4740_udc_pm_ops = {
-+ .suspend = jz4740_udc_suspend,
-+ .resume = jz4740_udc_resume,
-+};
-+
-+#define JZ4740_UDC_PM_OPS (&jz4740_udc_pm_ops)
-+
-+#else
-+#define JZ4740_UDC_PM_OPS NULL
-+#endif
-+
-+static struct platform_driver udc_driver = {
-+ .probe = jz4740_udc_probe,
-+ .remove = __devexit_p(jz4740_udc_remove),
-+ .driver = {
-+ .name = "jz-udc",
-+ .owner = THIS_MODULE,
-+ .pm = JZ4740_UDC_PM_OPS,
-+ },
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int __init udc_init (void)
-+{
-+ return platform_driver_register(&udc_driver);
-+}
-+module_init(udc_init);
-+
-+static void __exit udc_exit (void)
-+{
-+ platform_driver_unregister(&udc_driver);
-+}
-+module_exit(udc_exit);
-+
-+MODULE_DESCRIPTION("JZ4740 USB Device Controller");
-+MODULE_AUTHOR("Wei Jianli <jlwei@ingenic.cn>");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/usb/gadget/jz4740_udc.h b/drivers/usb/gadget/jz4740_udc.h
-new file mode 100644
-index 0000000..53fd1da
---- /dev/null
-+++ b/drivers/usb/gadget/jz4740_udc.h
-@@ -0,0 +1,101 @@
-+/*
-+ * linux/drivers/usb/gadget/jz4740_udc.h
-+ *
-+ * Ingenic JZ4740 on-chip high speed USB device controller
-+ *
-+ * Copyright (C) 2006 Ingenic Semiconductor Inc.
-+ * Author: <jlwei@ingenic.cn>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef __USB_GADGET_JZ4740_H__
-+#define __USB_GADGET_JZ4740_H__
-+
-+/*-------------------------------------------------------------------------*/
-+
-+// Max packet size
-+#define EP0_MAXPACKETSIZE 64
-+#define EPBULK_MAXPACKETSIZE 512
-+#define EPINTR_MAXPACKETSIZE 64
-+
-+#define UDC_MAX_ENDPOINTS 4
-+
-+/*-------------------------------------------------------------------------*/
-+
-+enum ep_type {
-+ ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
-+};
-+
-+struct jz4740_ep {
-+ struct usb_ep ep;
-+ struct jz4740_udc *dev;
-+
-+ const struct usb_endpoint_descriptor *desc;
-+
-+ uint8_t stopped;
-+ uint8_t bEndpointAddress;
-+ uint8_t bmAttributes;
-+
-+ enum ep_type type;
-+ size_t fifo;
-+ uint32_t csr;
-+
-+ uint32_t reg_addr;
-+ struct list_head queue;
-+};
-+
-+struct jz4740_request {
-+ struct usb_request req;
-+ struct list_head queue;
-+};
-+
-+enum ep0state {
-+ WAIT_FOR_SETUP, /* between STATUS ack and SETUP report */
-+ DATA_STATE_XMIT, /* data tx stage */
-+ DATA_STATE_NEED_ZLP, /* data tx zlp stage */
-+ WAIT_FOR_OUT_STATUS, /* status stages */
-+ DATA_STATE_RECV, /* data rx stage */
-+};
-+
-+/* For function binding with UDC Disable - Added by River */
-+typedef enum {
-+ UDC_STATE_ENABLE = 0,
-+ UDC_STATE_DISABLE,
-+}udc_state_t;
-+
-+struct jz4740_udc {
-+ struct usb_gadget gadget;
-+ struct usb_gadget_driver *driver;
-+ struct device *dev;
-+ spinlock_t lock;
-+ unsigned long lock_flags;
-+
-+ enum ep0state ep0state;
-+ struct jz4740_ep ep[UDC_MAX_ENDPOINTS];
-+
-+ udc_state_t state;
-+
-+ struct resource *mem;
-+ void __iomem *base;
-+ int irq;
-+
-+ struct clk *clk;
-+};
-+
-+#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
-+
-+static inline bool ep_is_in(const struct jz4740_ep *ep)
-+{
-+ return (ep->bEndpointAddress & USB_DIR_IN) == USB_DIR_IN;
-+}
-+
-+static inline uint8_t ep_index(const struct jz4740_ep *ep)
-+{
-+ return ep->bEndpointAddress & 0xf;
-+}
-+
-+#endif /* __USB_GADGET_JZ4740_H__ */
-
-
diff --git a/recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/logo_linux_clut224.tar.gz b/recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/logo_linux_clut224.tar.gz
deleted file mode 100644
index 06de727a05c99d3e487982ee007d710c0bc11162..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001
literal 8416
zcmeI1*E<`G+sC`9wnnS82vw_AQF|qiTD7XB_Nu*SNYsdys?|`VVtdRKC1#8mwP&am
zgitfJg%}}tf4@KAJ$%pJ`{+LUT%YTE-6!|;<%*-da?R^h_saEcf<?kXpKlMT1&0j$
zG{=5FVAzV0SLJ!uBaLqso#J1+e)YJYFs>{|5jc#E%1Sf!08Yeg%AM(jS;d09XWEh>
z??V41fX=7%+bAT4FzW2(`5F{-v5o5VIqA;5AcH_khiHH|vXlE9qsUc%w6MM7uarA{
z#s$H2QvBtzU!R>b%o1$n0AVNS&>gR?`nK~`RNMJMy*G$@?0tERT#(+WC!g<<kIK&1
zc3aPvQJ3pn7t0G_=f?{dt2SYjGViw2dK=go5kx(iTDYXlhFx5Ygi$*6!>H)9Zm$|H
z^um`;h$Kfs<|qlI_W$#Llt33c3j2XtzxDx4;AoSa9r??{0ajC^W*lYNLT9mF)0VAU
zZOYEa347*GpDq#6km1w=T;&X4{}OJaNJL9%pfU+D8Z&z|8{gW1?>ep^VQOk2br=3(
zL|%C<tU$FbHIch6>fA}L5VD_k38n7v)rZ>8k)<zpojs*;&d6kjwSTa^;(#8~D;r%Q
zTA^#7ulxrPxfl}$<X)#(zqX&k!VtrrXSOv9$fJvfnOvDO)uXJ-<7#;iaAwa82aEih
zgS_z+@m@jE$3yC=CJtA7=$<^aBT~YEhF0S(6`A9KNo)qn!AdHC!L^g@&J(61pG&}e
z9);;>Q9U@7j?R8x&PFy$LLy6+#xVGIAd|oB-0`q$!k$aQo2_FWYVm(y3F;MTprKQx
zDt3JXjD((L4|vR#s-^_<rg~(xDr}7vyR-yvDz%DtdVw3$u5cg5G?e9E@)F|jw5amr
zD!vVm{uF(}<iX0jreAHKy8!3%k0RY!Hgm7nZ`maJvQt#|_&j|PaU00pyvcbYx$!(J
z9!oPlUin@7POn}fZ!L44Dj)jbZ&Y<e0g+?wQOQ$P1IIpX`@W*NMj44tZ>;RjYoQee
zwXWQ$J*5{6{mG|YzSA7~nVm3dP3~)V;@lkaU>Y{p6VQAB%qCYvWdX<J`HaMdp=g6K
zt+PZKga*Uk>wk}naq6w97VBUAwVjh1q;sz5BSZGhCsXdJF}Rv9UsdAFfyt4dd_AjL
zSVgAu8-2ZWF35p|{%xQ$srY;QF+6aQSl`F)sAy7asoD#bar)91%61O~FBFIr5nvvp
zdAbzb^jqRZ0&43nCx$y)Z@=V7Zr)o?c}_c99J$18K=Ti5f*=@ha}M2;{O7^|JzQc?
zGlI+^FJ6il2I*-UhKb<a$bZ{+ibbvT1<^`=9Q4aydZWR=AKAqMY){i-4T1r}n+iI3
zfw|U1xhV;{Eu>4O-c@I@M4xBoi28SdGWJl%vG~ju$<`~&WlBI|)}_JRtE)WQ-ChV9
zD)Tn^*DSdf!oMwLFz_$UVqOQ`+nY?JNfu&0MZYFXW+me2<*P)YUoh%!20D9WE{bY)
zkut1R;`XL6vhwlyx1MnB!_2Q3C!PCi0^!E1S9f)U;xHnj<<={btBoOSahaAuPq5F;
zbw{lW#H)w0T@*Nw(2p)}L`XG}j?*POctI>5e#(3wIBGDQ6?NWKKw53sGH6@y(Pc<k
z!_#MbvPPp1Gq9!FBc8E&zr&+XfGh&Mlr51)N8o~Tk_9JFKT{H7{)%V2fkkX6-EWbp
zm*GSZUO2MCpJq8sp<iD2hXV8w_H=UA1Bz)}oA;QVj@Oi7N)2gifPTjuE8*)pWRAJ-
zmQ4amMFg#aq^P2;B)?(DIZ4S8Xa%jS{RPesB42n9Y2wp7VjF}VBhec_N{m$BSOtVO
zY&Vp=Yt?crBv%)=)(r+ei(hB83!xUNYtc$XN24U^CA?PLy%`d3OPmw8y3-i>Z-qWH
zT>LABS=oD0n2f<n)MMA_<GRy+?Bt&v2fCCfZ3N-~#a9*C9PtIlyaPiI<9qYJzO&)I
z`AW^4%TWO*+XxzH7<+B6Qa5-qN8ex9&AC03RB$>_WW>lcdYYxib6tY`*_{4%V}Yez
zD;v&jt*g*io9o4V5Qklbs#oz%1zpK_nZs;6qIXgGv?^bzpeUVE=eqWITcBhu-58qW
z|EodzFDI>3!Lo33+bwwSb$A8bWVc7#u<*-7NmENI`&OTntCashl3`BK`-te13!v<@
znsjD7Cn9u5p%DwvF<UCP<B4#rvojPNF1!ke!mhvhk}lY8N$)tW#&KRH2mSjm0N~u5
zX0h}0w&<a}dSnK-SRX`zVDiKD2K&Mkudi)r<>({HDaDZGo%auZ9tta)0~eL<dyE}u
zWqWo0e(Vt~8y!6&O)qmGu=ixTu<g(CV=$<zCdFant1e6H<MLp|^dF<DQrX8Q%u@a!
zAs)viCGY^2jNJxCrExsmQa)<@AXE=gSnZMl=1KJ}c}9bko0_Gi`3c7yCJyYPc&Tc=
z8W%&0(@BPhVcO_KUT~kz*tXt(PvG*6=xjrke7nLqxNV{VOeCz;!uqOS)0d&h3($XU
z>hpJc&5Dkfw{Aa$@w0|wL#k5e-zN{yPlbd}CRZ?f*CI7AZ&Tf5Wei0e!)voipZ25H
z-d)HM^@p79WEd6GN_vdRj@J@Woc5c+v#A(e`zQwam9!S|7`;K$qs0y<lX52o`a2JP
z1ytAHC_9dk_Tp{i4L_`M0s*43vC;<$7~mfz?kTAX5U-{q>@v5<U$WJ0*7e@Mq&}oc
zkStJ5;b{He0bID*n<SSdvo{IT^+h?t_m!&s_d>(m@xcZbpZ6Y~MMURLMkQgT_zJ5x
zbSkgK<;3zWcSX1#N^z|v<saQw=OX0Iic3z~58O!R6wMCunhoMI#Pw&}uN#I|g=?E$
zEe-JME@JDKTojTS8{_%uKHpz+k7h<mZ2BZ!9~CcCLBc1&IatH^)=rg5aG&?OyN{bL
zx6OVwjGm-(UYgw@PrOW=#S%FIFPNVO<tAr33<suVX1Gtg-cvQ~+y1yzA73hd&B$-S
zR!F2sEvZ5%FsDMcSx=yIU4<B~zv0?nAhZ9YFcZR5Kz7y}F$n4-^%sR%N|z9vWwM9I
zabO1pqL#KVBGvNUKRO_D_}J4qMKW~KDPG6_+uL7YU5XE--=+%VY&p`XATR84@?>=i
zcvL0?6-nU`>0CarELem!*V)6r=+<D|!_4Cp#crfR5(lH2bLz^bI2zt3AcDm~9Sa}S
zLc+NEP5g|wYxqY5`%GXR#+W6$V(_}UKwYJwm{9jsO&OE9#^`tJn?zTJSoD0aWuQdD
zCjeAY6k8u0oaWyUYh@<M-%n4UAq=hGq(NADpmE5~7>7M$X4F`m;?8Jb6ayEkFn606
zZ-RFT8HB6S`5Ei04p<t{x%0|>_<8yhjjNE^@NUK9YN8G!pIFpvS&pJm2tU0_I=d95
zQpISv#^yAI8O_1^A6=MQh<<J|8sG9UyF4?0*uv1=Qo+e}8gNh|ee>(ny$0<GM<J)8
z2^puV@c^NVug>fKFE~356}XYnFIGUE-jrdq-bs>yfoNjDs;HIYsG1hsSfTv6IbMQ|
zQXzRUbl4JYA-rVF1I22VLX_joEf51o0?tznYbyRzr?{;Gn(VZ(v}0pg7o3N#NsC?t
z-N7ud#rDYcn=K_EI4u1F*^A@>-@0lPZyPkuWym7`z2?GA(P_u<t6*7zW|{uAuYL);
z3gkH3Mx_$MoRiT_%xk9+-{(0Q@*?|3^!H1su}$e$9OS!DTN}&>u=#}tpr~P)j41g&
z{#wPI&Z9VUC+XsvHF#PgfPdR1rTx7l;HU8!Uhh~w?PlfR93*4ka)7xw+j-jaAPePx
z`YNLPHR8qj;pYY)GQ#?R+>9OdFo9?tIW0so%0k&6EP1JB*|>~#=aZa!p|65&9ar3Z
zTqti7S%o~#5rlcUmPpJc>`riy62`p^gSs|Ge~5hl4dzM)u8aobc0}%5j_4fy3f;of
z2Yus<_q1Z$M<jrGI%>)Mk*Zvq!%<4da#nm*yPlLnqI*G5Oa4@7H$aU#2kB`gp++R?
zJEvuP@|eZff~NSy=m4opOU2mW-Yl8~;sD!i^&AC#u9y+lS&WcYIosNPG{v$_5=;KE
z&fprKzFq@~{k&}7D=&d+4Cu4<>0?zQthpEB>5Y>2D&!Yitfai=Of%M<P~QzeK!E+}
z_yf-4<9~L7<&GPL<{yA<-aJlu<)Q-u5I@W;o;>+!d37@nEnf*QdV#w&Yf`(spUa>L
zOUvSdLYu8vjGsFlfR!;h3)lMB)n2Ok1B-4=bKUaXve5mwIA*H4(W0z7{>a1IGqHb6
zQmeZv?s0!^xanz7lg;VOx$TB>=w{L|&)67!QT#;KLi`6vzUT#@_?pIPWebMW@764V
zEHn76$=_jr4J~_H236#%eH#Kz_Z#?N!mPY0$&!H;XQl_YiRbyKKl3+I*|x<fGRttP
zn_#9Z=pvWvdsSsxi6%5WhSEYpCg^2S;vYwJ$p<`S{>bC^k$C1k7Cw}KV=*bhFymHB
zoZZqW{F%}`J^O^t_o%$eG8}Suh|DT<c@>{t_s0Rty#Bs^{V4J4v`}(29<(%dC|J}%
zt`7p;QyZ^x|Ng|q;P*>@k6~JPac0JTw%}%Zpn%rzLQtDqtJ!xwx)>*wd$)7Y%Z)Cx
z0Fmk~PYoq+gS*v_-!jBtqYV)Yc?v9JWC_jwH`W44i?I&Ryw8bzof=5D#1BDBYUN_n
zU!)Z8m)qmZdB62)`(a$w+g0rq`A=MxM|bnODjTa5m}YofIcw{F>)3}!Pe7)Q7V(6g
zw5J6&>FiCpM=#$hi$$4z)UOB8SZRNbwwazJiJhCJvx?5NicUDiMrfLi1Q=0gwcCeM
zZ+NaL>PiS1?Zw6bWWv*_^_i!s2Ty?GG#)yi@86QXdfM~OVo3U)=rerI%2Hyi@^nUC
zgbX8IdWH87%V59gYI{Ta!5<maczyxH?N7ol-!qP^u>RQr+E00JupdYL(zZzGx2my{
zPEs!G9Am!4o-j*i4`$q8b2BX~9<IZ@chV0X(>={hgfT(0P40;uRpxL97emi%^6T`?
z!a6sLKrgtKrbrJ9t|OBc{A4R*!ZQ4%E{w#)-Y+je9z2gS$Ryb=+n6W9=FZC=U!A@i
zTHM({8wxp7|64O|uoW)sbm@-J{uc4(&PUtJD%XwZF7ZP>05NLP1b0zbg7RJUy7w81
z1kNl5Z6s?jiQ}x-$3DZ~$9nR3Oo$QRq<rPn3I$ThTWR_#<_yhk%rnngPSx*YHiC~f
z_jOmzPT)`}|Amz)XU92F?behtMhQw5%sTtqD2Q+6F$p!cY@s_j`N-+i6B8Q(R>eeZ
zzv{625-lqGoQTPn3}#=$6umJK+^Z|#yxFQfku15RQ()b)Qjbn$?kzDQRRC9fsZYQ_
z<Xhh|@b}x%?ZZ;B?l6=kev^&rY~!ow+9=?O(tGFhGv^|myy-Twn_JOCrB7V0^!gXM
z-JhDVK3X22+NVl=3B11_TLy0}=R<OPTZq^#MP(BZ$E7^ft^1)(ui~t~x9fJ$_WX6d
zI$~+0OT3ZEX;Gt<zWDYChcn)hZ1=*GLg3?pC-Vj`cXF0gq`lR<4hnWT69O+98-CU+
zEX}lzYE&Oc!q2nMvz+y4gn6uMoowAzx_Yb|9j|#7nk)LD0@RZ!b<cV<Ak6Qi5d_2<
z?nVp7FzojyMU=hjFI6fXQ2q}f>Vq=K%6a%pQ<0OSR-5fIBCtwF)cx;^xaX_^Ek23B
zb-(9L{sEAv7$0?;a+cc%y0N5aD+d0@8|v7t!n?r%xbAoLOW(4;gb2;v-)q(WCEVn)
z>FYIl<3?^54(OQ8V6jU}zs4g4afLl}ICYzH_sq{|t$wZvFu^v}ZB8|K4iwi)OwAih
z`wQ$^F>2;AkJ6LeF$(zgN$m&+#03ZZ>hk;K?8f_u5K*_8KYoNElLA@9r%7t67=N%{
z7}FqkP}3V7dEu!Q1u)!vc7~0ix<++>=&1BSwARfTGO7k_w0o8K7yb6VJC`unUonCJ
zX*$sukhy_b`guvXsfanrx&u*JbmIInX==?oJv@LE*^H@uTD-s~``8Go6;9xIJk^R*
zq0Ka$XafFyD(4lzotg04THeRdy7<pa&d;DO)C#yW*Lqg?ZkT59dF3qXp7*CAkupRp
zMP_x%8jrg>Su^U*J~AwBBWqjn=ohPgp|mt6-_kS==42B~Z?RpZJX9mPr7d>wcI$Qj
zVu0s@GNu0o+V3f1MK<?hR|^Jzjn@B0or`WE@`7T_3`CPz9bo|xIvAYhp)xmR5}`&9
zDdE)6GyNb%(dx9u?Btp8FW6cbdY}7s{8#SJ>7J};vI%)zJE>o}RkpEfg_V+F{RR>|
zlvj3QW_Tj`uzH|Rnf-DLFM>y3KdR+vXbQ4f^=pwuL<U<tY<g6I+_v+5ShEn+B0nC%
zUN|q#B$M!iv-fP==EM5%#fiW!3v`G7qQ#K9*+A_o{T&cSJvaoiszq3phJ^=eQ6&++
zXS9i1%Cl?Xu;&*N&eutID05_FiK7y>h~rQOKu*yo;eE>%CjAS*3|owC%lzg=V!B~R
z;g8my2UXS8ezD#ld|$E@N7kc_b8r{2*3OFVD-G!g^XJD7!Ud;8Mff2P^9MJir?h}L
zuVr!b-F+bm$hDXj{-|aSwo7uX9<&$Km{gM0y(!U=Dw0VNQ=jy&qupO9r4nfdDfBHp
zM!nQK&|L%Xj7tYZA>%su%K~3a;n;O5e&42-gK<_SV$<PImbGF5QUX~K0RN!3^)I)C
zSNyQTVd|jU6PS8#5^+viu;VG=B~4L}JX}G?w<7IY9@rAgaT`EmYF$%qa6@Ft_Fdw5
zpd)|WbPH|f_b2s}A6WLc^e7cWZjA-FA;BZ*U&Bw30(0Bjj5+(eZFLfX`mcYD@yWHh
zvpmg0^S0b7OKNZ-1DqR)^h*b3!?`nx)s~h2l5}daKHtk-<+UF6E<!lSOPV!orf2wq
z+wmXAT!vIjZ2t4K9x{sh4v>5ai=j;MPohp5t+-Zrc~%_X_-()1&xF)x;NMQr?OV7N
zeXiM!_TzsvQ#@yK+(-Tld3Ut*`A6n&HODV^j3G|8tgH{LCMcyPruVbuPqsM(-m1Tr
z^NWY;Uz5H4x+5oLd4o`8j?l5%>a8so|J4sQWFrvo(QxZ5jXWrrJ60S;OAb)xc<&uw
zYvmoFtmi1d9S#)=R8O&h-j)l7&zv^l+wH;ttlaAZL2wS@t%<j>s?;E$Z11}4to&<a
z#Fu~usR%pjAXG#(iBjshk+A+qRMg~QS><1}hpxreUFk&~*7NZ((`H&yDYD>L6ufPb
ze<%K5|F`auZ-T4q-UVUfI_^5@8E>n&XYJGI1$e`IN~Yk^NrrgWyB24zOlhrh0-)dE
z$SY%Wo*A1Z;r+WOkmo}!Pq1}3NB6?UZO`((bk|{&wSZ1CGYF$(XawOmWgD^i*&(_&
z1vVn!R$=U#Np>7dtcQuuWV1tK<#Sap#xkzd6PWLCV)h;&3tX<R8L;jDLz40I^|CmM
zZ2eAU5ps6oNBMu$;QqOvQp&wk&fEBnSUY00<nSgw&Mxcj=i}=e?44=o!R47y^1$j$
zZ9}&~Tj`3N@>FOs2eF_lYQXn`?|e@FHQNh^2@w`T^72-<RQO~JdwNCHqxbqL1)NdQ
zMy&Z+S;xEs>wDy9gRasdx;`qYaf(K)G|By`Qs!<(LRmUh`MokjU-7f9oPOp$6&!>%
z#`V;U(UHw@tK8+a6-HgC=iR<UlvJw5L5$8k-?mT|+99;-ec44v<-zh#3%tyLZ+k(r
zRBz+S(F(^@^csAA5<2V)(+{cj_pZl)vs&XTpw`ypRat`~(Oh1(aWiuOs;mdsNEyT~
zGV;oGq3pB%tbw-mwR{MKk~^!<9@wvmZd`Y-E>WK2c(A*%ayLhhJZ)=Q-et`CzQ7sJ
zPN+@5FcHGX)k7<Tg@0fL$|TS^`z6)E8WFr0lBQTA2B)7uTd_SK)?>v*2#*T3^FM%7
ze7R!0+V2F~_=8cG=Vk9-?WciQZ+ucM)i|6dIBV3Owog^pw#;=7OollMu4?3Z`mD~M
z7Ab@?1;FRujj=Bw(6TK6!|E9Z{_4m@(QIYhYTD6xc<SROF|aM7z)sxTP69)zeS{(j
zhkm((A^qYWRq;^}G#Y@PzI5>iTWMU>w3#uzHjc%a-9ps+2g-<^SLprBZpShc)_Of1
zH5M9nI}DC$=b4xT_I`!jFwvA_eaQAOJ?d!|YQkf)#RHJ6n)`T>O}e1xd1LsWbEXP`
zijmzYxe608VU{q0^@8YM^KzQAKYDVP3NGJq%{zX&ZgDr0R~Xwee3LRS>7o4cEmFqb
zNt+%wdD@5AFhO~-hth2WmGzK#$$qz;s~#rTxMCqq*E?q;Aq92n84|<rFXNBufghEN
ziXtO>j8sDH=Py@<fs?~q027r-=$U0lvtsv6XJ^DiE^Xf(HcJ(Uq<+DqY$~nP2YG*v
z^A^F1xA#*3E?Y^NrKJ`-AIis*UV0<KC#UcNN2iY13W}f9)UfqRPExiYX(rEqox#9-
zIOG`pHSjd9QE_+hI6{;m18E%Uy#*boR#4@kFadE>dQusNk+ibx!AKh8O4Px>#+cRv
z=hQ%Xl0rj#cA0slVHqAu2IXd@aSFh?%nyssiVV^7VnUPs;w?{Ik)aJ}?SQC~XTIB9
zBk0y5i`P-ExeIQZ^>(Qk5tmBZ2#nod0u$;XFJZ=7K(+!N*ebQbo>a{h6X^Gd{lms~
z*G}s7iRUI^*vh)A`Yeav6lQU7c(SGJZgl3OZJI$*6pKMWwEfPuM)A#L^|kAjJEc{V
zvhz*A*(kKVaWl^x_mT(G&Kl@8+fJd*zmIncVMr71-w#J|^|j*lxh4WKWj=)rm}S^>
z*{ie^)>?l(rg4Qeoz~((pxT0$_ixKNyXOV#7wPWHIpG5S=Aq&aqYqoUyxz5pI}qJp
z@#iDA8sd_tPgA|r4d&L9N}ssq|GWG5;Hv)pPd3_v-@!YeZJf>*py_<}W{9l0eYS+f
z@cKYNF+wbj5U40Ve?I%{k83NY-b(=U7S3{b?#pwQ8V89(`HgHew=T}dqKD8hXY1cG
zTBv7JTBU9GMtK#wP)>p6{O7@9H@{Y>L9?4~ZJ8KLui2$cT-N60y&bT>BYGPFtu?ne
zVr{0)`6z|sjOLi}s<x;Yc&K?MgTX56w?|Vbx^*K=Vxm~ZUWN3mZ*0rA+e6fMB+G+x
z=NW)*{qmJLgJj-aHlU%4o)@Q*fa*wSK^=Q5cXwJ(DxY|T8Oo+q8*Vk}&d{e~DtFtY
zqA3p~<NXR^&Z&FLnnE<R$@>{X4ocVG|I@5>c>>ckcWoi+ty-(uIHaT(tMAusCQJwA
zh%RNAPgUxLos3!Rn|o*mxfRiJHpf>;^*@vCLb;yp6L%c!Xd1PkNET0*7DJulSACm#
zHFV+9#T#{3;4&5_vLu`J5;y7R=i{c&r}g1K#Z;!~T-@2<T)TL`b3s{|=>Vzl&y%e$
zzibljrtZ5d`J|P1Xp+TD?ay|e$gn)}*z(zo29=GH=xO8GmEqApUbmgW<K7Gq|B<)J
ze4MtODk8`P6FuGGDc9sIKd(tp+BwbLhP8ro?kS9i!0?cjug=*qsWh^a7oJ^ZxkXhQ
z<TkfK_zioLn%yC(R_-VuaP_R$;yXTwEdn@F#N=2W8DPVerx4EnP(aPYB-e6e=%QMF
zrw7BF{f`u<cVDBu!XE5b%r5Wd$y{rx(m36fxYd|FDT{lmhmz|XmaFzE=UX8*_N2zy
zz?w$^3YXh67t0A_Z@o%2vz(1$sO+O{-4^KyC*ddG?_Dqs_#A9!z+&FN9JA*Efiw#w
zikp1zvfIZf4o{W=^Tob9;&RGC)v%FsR7dE@kI>Qf-UOrIJBOdtjvu1fT+x$*z28}x
zd|!wpNI5m1H2jtzDK<oRBfTexV$w}Psb{vv2woOgMQC;1Zeq^3{aHlFNXa4T?6_^y
zJ;7l1pl)_+VgCW$6To5i86A*o5ykuzcB8ZTjaWANR^Vy+T^r=6gxL@2XFik2%Q}JI
znipHgS;M&bOD3+cG7vO#1iue1Q$z*EN1vE&pS<_8$vYF4Jp~<r{0z=%y}3egs6QhQ
z;~7b1jYrpeTRQ7n5n&Y5$mr;WIMnk-7ze0hROA1sTK#{lni~1y7o1(zYp%g}x#xdd
Ru=STT4u~bED<5gD{13LXyY2u0
diff --git a/recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/modifier-keys.patch b/recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/modifier-keys.patch
deleted file mode 100644
index 825601d..0000000
--- a/recipes-kernel/linux/linux-jlime-ben-nanonote-2.6.36/modifier-keys.patch
+++ /dev/null
@@ -1,604 +0,0 @@
-From b6325b84e3ea906745900fec13ebd12e27eca762 Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Sat, 24 Apr 2010 12:22:25 +0200
-Subject: [PATCH] Modify keymap for ben nanonote
-
----
- drivers/char/defkeymap.c_shipped | 308 +++++++++++++++++++++++++++++---------
- drivers/char/defkeymap.map | 74 +++++++---
- 2 files changed, 286 insertions(+), 96 deletions(-)
-
---- a/drivers/char/defkeymap.c_shipped
-+++ b/drivers/char/defkeymap.c_shipped
-@@ -9,10 +9,10 @@ u_short plain_map[NR_KEYS] = {
- 0xf200, 0xf01b, 0xf031, 0xf032, 0xf033, 0xf034, 0xf035, 0xf036,
- 0xf037, 0xf038, 0xf039, 0xf030, 0xf02d, 0xf03d, 0xf07f, 0xf009,
- 0xfb71, 0xfb77, 0xfb65, 0xfb72, 0xfb74, 0xfb79, 0xfb75, 0xfb69,
-- 0xfb6f, 0xfb70, 0xf05b, 0xf05d, 0xf201, 0xf702, 0xfb61, 0xfb73,
-+ 0xfb6f, 0xfb70, 0xf05b, 0xf05d, 0xf201, 0xf706, 0xfb61, 0xfb73,
- 0xfb64, 0xfb66, 0xfb67, 0xfb68, 0xfb6a, 0xfb6b, 0xfb6c, 0xf03b,
- 0xf027, 0xf060, 0xf700, 0xf05c, 0xfb7a, 0xfb78, 0xfb63, 0xfb76,
-- 0xfb62, 0xfb6e, 0xfb6d, 0xf02c, 0xf02e, 0xf02f, 0xf700, 0xf30c,
-+ 0xfb62, 0xfb6e, 0xfb6d, 0xf02c, 0xf02e, 0xf02f, 0xf701, 0xf30c,
- 0xf703, 0xf020, 0xf207, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104,
- 0xf105, 0xf106, 0xf107, 0xf108, 0xf109, 0xf208, 0xf209, 0xf307,
- 0xf308, 0xf309, 0xf30b, 0xf304, 0xf305, 0xf306, 0xf30a, 0xf301,
-@@ -22,54 +22,102 @@ u_short plain_map[NR_KEYS] = {
- 0xf118, 0xf601, 0xf602, 0xf117, 0xf600, 0xf119, 0xf115, 0xf116,
- 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- };
-
--u_short shift_map[NR_KEYS] = {
-+static u_short shift_map[NR_KEYS] = {
- 0xf200, 0xf01b, 0xf021, 0xf040, 0xf023, 0xf024, 0xf025, 0xf05e,
- 0xf026, 0xf02a, 0xf028, 0xf029, 0xf05f, 0xf02b, 0xf07f, 0xf009,
- 0xfb51, 0xfb57, 0xfb45, 0xfb52, 0xfb54, 0xfb59, 0xfb55, 0xfb49,
-- 0xfb4f, 0xfb50, 0xf07b, 0xf07d, 0xf201, 0xf702, 0xfb41, 0xfb53,
-+ 0xfb4f, 0xfb50, 0xf07b, 0xf07d, 0xf201, 0xf706, 0xfb41, 0xfb53,
- 0xfb44, 0xfb46, 0xfb47, 0xfb48, 0xfb4a, 0xfb4b, 0xfb4c, 0xf03a,
- 0xf022, 0xf07e, 0xf700, 0xf07c, 0xfb5a, 0xfb58, 0xfb43, 0xfb56,
-- 0xfb42, 0xfb4e, 0xfb4d, 0xf03c, 0xf03e, 0xf03f, 0xf700, 0xf30c,
-+ 0xfb42, 0xfb4e, 0xfb4d, 0xf03b, 0xf03a, 0xf03f, 0xf701, 0xf30c,
- 0xf703, 0xf020, 0xf207, 0xf10a, 0xf10b, 0xf10c, 0xf10d, 0xf10e,
- 0xf10f, 0xf110, 0xf111, 0xf112, 0xf113, 0xf213, 0xf203, 0xf307,
- 0xf308, 0xf309, 0xf30b, 0xf304, 0xf305, 0xf306, 0xf30a, 0xf301,
- 0xf302, 0xf303, 0xf300, 0xf310, 0xf206, 0xf200, 0xf03e, 0xf10a,
- 0xf10b, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-- 0xf30e, 0xf702, 0xf30d, 0xf200, 0xf701, 0xf205, 0xf114, 0xf603,
-+ 0xf30e, 0xf702, 0xf30d, 0xf01c, 0xf701, 0xf205, 0xf114, 0xf603,
- 0xf20b, 0xf601, 0xf602, 0xf117, 0xf600, 0xf20a, 0xf115, 0xf116,
- 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- };
-
--u_short altgr_map[NR_KEYS] = {
-+static u_short altgr_map[NR_KEYS] = {
- 0xf200, 0xf200, 0xf200, 0xf040, 0xf200, 0xf024, 0xf200, 0xf200,
-- 0xf07b, 0xf05b, 0xf05d, 0xf07d, 0xf05c, 0xf200, 0xf200, 0xf200,
-- 0xfb71, 0xfb77, 0xf918, 0xfb72, 0xfb74, 0xfb79, 0xfb75, 0xfb69,
-- 0xfb6f, 0xfb70, 0xf200, 0xf07e, 0xf201, 0xf702, 0xf914, 0xfb73,
-- 0xf917, 0xf919, 0xfb67, 0xfb68, 0xfb6a, 0xfb6b, 0xfb6c, 0xf200,
-- 0xf200, 0xf200, 0xf700, 0xf200, 0xfb7a, 0xfb78, 0xf916, 0xfb76,
-- 0xf915, 0xfb6e, 0xfb6d, 0xf200, 0xf200, 0xf200, 0xf700, 0xf30c,
-- 0xf703, 0xf200, 0xf207, 0xf50c, 0xf50d, 0xf50e, 0xf50f, 0xf510,
-- 0xf511, 0xf512, 0xf513, 0xf514, 0xf515, 0xf208, 0xf202, 0xf911,
-+ 0xf07b, 0xf05b, 0xf05d, 0xf07d, 0xf05c, 0xf07e, 0xf008, 0xf200,
-+ 0xf021, 0xf040, 0xf023, 0xf024, 0xf025, 0xf05e, 0xf026, 0xf02a,
-+ 0xf028, 0xf029, 0xf200, 0xf07e, 0xf201, 0xf706, 0xf0b0, 0xf0a8,
-+ 0xf0a4, 0xf02d, 0xf05f, 0xf07b, 0xf05b, 0xf05d, 0xf07d, 0xf200,
-+ 0xf200, 0xf200, 0xf700, 0xf200, 0xf039, 0xf030, 0xf916, 0xfb76,
-+ 0xf915, 0xf03c, 0xf03e, 0xf027, 0xf022, 0xf200, 0xf701, 0xf30c,
-+ 0xf703, 0xf200, 0xf207, 0xf031, 0xf032, 0xf033, 0xf034, 0xf035,
-+ 0xf036, 0xf037, 0xf038, 0xf514, 0xf515, 0xf208, 0xf202, 0xf911,
- 0xf912, 0xf913, 0xf30b, 0xf90e, 0xf90f, 0xf910, 0xf30a, 0xf90b,
- 0xf90c, 0xf90d, 0xf90a, 0xf310, 0xf206, 0xf200, 0xf07c, 0xf516,
- 0xf517, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-- 0xf30e, 0xf702, 0xf30d, 0xf200, 0xf701, 0xf205, 0xf114, 0xf603,
-+ 0xf30e, 0xf702, 0xf30d, 0xf01c, 0xf701, 0xf205, 0xf114, 0xf603,
- 0xf118, 0xf601, 0xf602, 0xf117, 0xf600, 0xf119, 0xf115, 0xf116,
- 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- };
-
--u_short ctrl_map[NR_KEYS] = {
-+static u_short ctrl_map[NR_KEYS] = {
- 0xf200, 0xf200, 0xf200, 0xf000, 0xf01b, 0xf01c, 0xf01d, 0xf01e,
-- 0xf01f, 0xf07f, 0xf200, 0xf200, 0xf01f, 0xf200, 0xf008, 0xf200,
-+ 0xf01f, 0xf07f, 0xf200, 0xf200, 0xf01f, 0xf200, 0xf200, 0xf200,
- 0xf011, 0xf017, 0xf005, 0xf012, 0xf014, 0xf019, 0xf015, 0xf009,
-- 0xf00f, 0xf010, 0xf01b, 0xf01d, 0xf201, 0xf702, 0xf001, 0xf013,
-+ 0xf00f, 0xf010, 0xf01b, 0xf01d, 0xf201, 0xf706, 0xf001, 0xf013,
- 0xf004, 0xf006, 0xf007, 0xf008, 0xf00a, 0xf00b, 0xf00c, 0xf200,
- 0xf007, 0xf000, 0xf700, 0xf01c, 0xf01a, 0xf018, 0xf003, 0xf016,
-- 0xf002, 0xf00e, 0xf00d, 0xf200, 0xf20e, 0xf07f, 0xf700, 0xf30c,
-+ 0xf002, 0xf00e, 0xf00d, 0xf200, 0xf20e, 0xf07f, 0xf701, 0xf30c,
- 0xf703, 0xf000, 0xf207, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104,
- 0xf105, 0xf106, 0xf107, 0xf108, 0xf109, 0xf208, 0xf204, 0xf307,
- 0xf308, 0xf309, 0xf30b, 0xf304, 0xf305, 0xf306, 0xf30a, 0xf301,
-@@ -79,35 +127,67 @@ u_short ctrl_map[NR_KEYS] = {
- 0xf118, 0xf601, 0xf602, 0xf117, 0xf600, 0xf119, 0xf115, 0xf116,
- 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- };
-
--u_short shift_ctrl_map[NR_KEYS] = {
-+static u_short shift_ctrl_map[NR_KEYS] = {
- 0xf200, 0xf200, 0xf200, 0xf000, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf01f, 0xf200, 0xf200, 0xf200,
- 0xf011, 0xf017, 0xf005, 0xf012, 0xf014, 0xf019, 0xf015, 0xf009,
-- 0xf00f, 0xf010, 0xf200, 0xf200, 0xf201, 0xf702, 0xf001, 0xf013,
-+ 0xf00f, 0xf010, 0xf200, 0xf200, 0xf201, 0xf706, 0xf001, 0xf013,
- 0xf004, 0xf006, 0xf007, 0xf008, 0xf00a, 0xf00b, 0xf00c, 0xf200,
- 0xf200, 0xf200, 0xf700, 0xf200, 0xf01a, 0xf018, 0xf003, 0xf016,
-- 0xf002, 0xf00e, 0xf00d, 0xf200, 0xf200, 0xf200, 0xf700, 0xf30c,
-+ 0xf002, 0xf00e, 0xf00d, 0xf200, 0xf200, 0xf200, 0xf701, 0xf30c,
- 0xf703, 0xf200, 0xf207, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf208, 0xf200, 0xf307,
- 0xf308, 0xf309, 0xf30b, 0xf304, 0xf305, 0xf306, 0xf30a, 0xf301,
- 0xf302, 0xf303, 0xf300, 0xf310, 0xf206, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-- 0xf30e, 0xf702, 0xf30d, 0xf200, 0xf701, 0xf205, 0xf114, 0xf603,
-+ 0xf30e, 0xf702, 0xf30d, 0xf01c, 0xf701, 0xf205, 0xf114, 0xf603,
- 0xf118, 0xf601, 0xf602, 0xf117, 0xf600, 0xf119, 0xf115, 0xf116,
- 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- };
-
--u_short alt_map[NR_KEYS] = {
-+static u_short alt_map[NR_KEYS] = {
- 0xf200, 0xf81b, 0xf831, 0xf832, 0xf833, 0xf834, 0xf835, 0xf836,
- 0xf837, 0xf838, 0xf839, 0xf830, 0xf82d, 0xf83d, 0xf87f, 0xf809,
- 0xf871, 0xf877, 0xf865, 0xf872, 0xf874, 0xf879, 0xf875, 0xf869,
-- 0xf86f, 0xf870, 0xf85b, 0xf85d, 0xf80d, 0xf702, 0xf861, 0xf873,
-+ 0xf86f, 0xf870, 0xf85b, 0xf85d, 0xf80d, 0xf706, 0xf861, 0xf873,
- 0xf864, 0xf866, 0xf867, 0xf868, 0xf86a, 0xf86b, 0xf86c, 0xf83b,
- 0xf827, 0xf860, 0xf700, 0xf85c, 0xf87a, 0xf878, 0xf863, 0xf876,
-- 0xf862, 0xf86e, 0xf86d, 0xf82c, 0xf82e, 0xf82f, 0xf700, 0xf30c,
-+ 0xf862, 0xf86e, 0xf86d, 0xf200, 0xf200, 0xf82f, 0xf701, 0xf30c,
- 0xf703, 0xf820, 0xf207, 0xf500, 0xf501, 0xf502, 0xf503, 0xf504,
- 0xf505, 0xf506, 0xf507, 0xf508, 0xf509, 0xf208, 0xf209, 0xf907,
- 0xf908, 0xf909, 0xf30b, 0xf904, 0xf905, 0xf906, 0xf30a, 0xf901,
-@@ -117,35 +197,115 @@ u_short alt_map[NR_KEYS] = {
- 0xf118, 0xf210, 0xf211, 0xf117, 0xf600, 0xf119, 0xf115, 0xf116,
- 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- };
-
--u_short ctrl_alt_map[NR_KEYS] = {
-+static u_short ctrl_alt_map[NR_KEYS] = {
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf811, 0xf817, 0xf805, 0xf812, 0xf814, 0xf819, 0xf815, 0xf809,
-- 0xf80f, 0xf810, 0xf200, 0xf200, 0xf201, 0xf702, 0xf801, 0xf813,
-+ 0xf80f, 0xf810, 0xf200, 0xf200, 0xf201, 0xf706, 0xf801, 0xf813,
- 0xf804, 0xf806, 0xf807, 0xf808, 0xf80a, 0xf80b, 0xf80c, 0xf200,
- 0xf200, 0xf200, 0xf700, 0xf200, 0xf81a, 0xf818, 0xf803, 0xf816,
-- 0xf802, 0xf80e, 0xf80d, 0xf200, 0xf200, 0xf200, 0xf700, 0xf30c,
-+ 0xf802, 0xf80e, 0xf80d, 0xf200, 0xf200, 0xf200, 0xf701, 0xf30c,
- 0xf703, 0xf200, 0xf207, 0xf500, 0xf501, 0xf502, 0xf503, 0xf504,
- 0xf505, 0xf506, 0xf507, 0xf508, 0xf509, 0xf208, 0xf200, 0xf307,
- 0xf308, 0xf309, 0xf30b, 0xf304, 0xf305, 0xf306, 0xf30a, 0xf301,
- 0xf302, 0xf303, 0xf300, 0xf20c, 0xf206, 0xf200, 0xf200, 0xf50a,
- 0xf50b, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-- 0xf30e, 0xf702, 0xf30d, 0xf200, 0xf701, 0xf205, 0xf114, 0xf603,
-+ 0xf30e, 0xf702, 0xf30d, 0xf01c, 0xf701, 0xf205, 0xf114, 0xf603,
- 0xf118, 0xf601, 0xf602, 0xf117, 0xf600, 0xf119, 0xf115, 0xf20c,
- 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+};
-+
-+static u_short ctl_map[NR_KEYS] = {
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf033, 0xf200, 0xf200,
-+ 0xfb71, 0xfb77, 0xfb65, 0xfb72, 0xfb74, 0xfb79, 0xf037, 0xf038,
-+ 0xf039, 0xfb70, 0xf200, 0xf200, 0xf201, 0xf706, 0xfb61, 0xfb73,
-+ 0xfb64, 0xfb66, 0xfb67, 0xfb68, 0xf034, 0xf035, 0xf036, 0xf200,
-+ 0xf200, 0xf200, 0xf700, 0xf200, 0xfb7a, 0xfb78, 0xfb63, 0xfb76,
-+ 0xfb62, 0xf031, 0xf032, 0xf200, 0xf200, 0xf030, 0xf701, 0xf30c,
-+ 0xf703, 0xf200, 0xf207, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf208, 0xf200, 0xf307,
-+ 0xf308, 0xf309, 0xf30b, 0xf304, 0xf305, 0xf306, 0xf30a, 0xf301,
-+ 0xf302, 0xf303, 0xf300, 0xf310, 0xf206, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf30e, 0xf702, 0xf30d, 0xf01c, 0xf701, 0xf205, 0xf114, 0xf603,
-+ 0xf118, 0xf601, 0xf602, 0xf117, 0xf600, 0xf119, 0xf115, 0xf116,
-+ 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- };
-
- ushort *key_maps[MAX_NR_KEYMAPS] = {
-- plain_map, shift_map, altgr_map, NULL,
-- ctrl_map, shift_ctrl_map, NULL, NULL,
-- alt_map, NULL, NULL, NULL,
-- ctrl_alt_map, NULL
-+ plain_map, shift_map, altgr_map, 0,
-+ ctrl_map, shift_ctrl_map, 0, 0,
-+ alt_map, 0, 0, 0,
-+ ctrl_alt_map, 0, 0, 0,
-+ 0, 0, 0, 0,
-+ 0, 0, 0, 0,
-+ 0, 0, 0, 0,
-+ 0, 0, 0, 0,
-+ 0, 0, 0, 0,
-+ 0, 0, 0, 0,
-+ 0, 0, 0, 0,
-+ 0, 0, 0, 0,
-+ 0, 0, 0, 0,
-+ 0, 0, 0, 0,
-+ 0, 0, 0, 0,
-+ 0, 0, 0, 0,
-+ ctl_map, 0
- };
-
--unsigned int keymap_count = 7;
-+unsigned int keymap_count = 8;
-
- /*
- * Philosophy: most people do not define more strings, but they who do
-@@ -216,47 +376,47 @@ char *func_table[MAX_NR_FUNC] = {
- func_buf + 135,
- func_buf + 140,
- func_buf + 145,
-- NULL,
-- NULL,
-+ 0,
-+ 0,
- func_buf + 149,
-- NULL,
-+ 0,
- };
-
--struct kbdiacruc accent_table[MAX_DIACR] = {
-- {'`', 'A', 0300}, {'`', 'a', 0340},
-- {'\'', 'A', 0301}, {'\'', 'a', 0341},
-- {'^', 'A', 0302}, {'^', 'a', 0342},
-- {'~', 'A', 0303}, {'~', 'a', 0343},
-- {'"', 'A', 0304}, {'"', 'a', 0344},
-- {'O', 'A', 0305}, {'o', 'a', 0345},
-- {'0', 'A', 0305}, {'0', 'a', 0345},
-- {'A', 'A', 0305}, {'a', 'a', 0345},
-- {'A', 'E', 0306}, {'a', 'e', 0346},
-- {',', 'C', 0307}, {',', 'c', 0347},
-- {'`', 'E', 0310}, {'`', 'e', 0350},
-- {'\'', 'E', 0311}, {'\'', 'e', 0351},
-- {'^', 'E', 0312}, {'^', 'e', 0352},
-- {'"', 'E', 0313}, {'"', 'e', 0353},
-- {'`', 'I', 0314}, {'`', 'i', 0354},
-- {'\'', 'I', 0315}, {'\'', 'i', 0355},
-- {'^', 'I', 0316}, {'^', 'i', 0356},
-- {'"', 'I', 0317}, {'"', 'i', 0357},
-- {'-', 'D', 0320}, {'-', 'd', 0360},
-- {'~', 'N', 0321}, {'~', 'n', 0361},
-- {'`', 'O', 0322}, {'`', 'o', 0362},
-- {'\'', 'O', 0323}, {'\'', 'o', 0363},
-- {'^', 'O', 0324}, {'^', 'o', 0364},
-- {'~', 'O', 0325}, {'~', 'o', 0365},
-- {'"', 'O', 0326}, {'"', 'o', 0366},
-- {'/', 'O', 0330}, {'/', 'o', 0370},
-- {'`', 'U', 0331}, {'`', 'u', 0371},
-- {'\'', 'U', 0332}, {'\'', 'u', 0372},
-- {'^', 'U', 0333}, {'^', 'u', 0373},
-- {'"', 'U', 0334}, {'"', 'u', 0374},
-- {'\'', 'Y', 0335}, {'\'', 'y', 0375},
-- {'T', 'H', 0336}, {'t', 'h', 0376},
-- {'s', 's', 0337}, {'"', 'y', 0377},
-- {'s', 'z', 0337}, {'i', 'j', 0377},
-+struct kbdiacr accent_table[MAX_DIACR] = {
-+ {'`', 'A', '\300'}, {'`', 'a', '\340'},
-+ {'\'', 'A', '\301'}, {'\'', 'a', '\341'},
-+ {'^', 'A', '\302'}, {'^', 'a', '\342'},
-+ {'~', 'A', '\303'}, {'~', 'a', '\343'},
-+ {'"', 'A', '\304'}, {'"', 'a', '\344'},
-+ {'O', 'A', '\305'}, {'o', 'a', '\345'},
-+ {'0', 'A', '\305'}, {'0', 'a', '\345'},
-+ {'A', 'A', '\305'}, {'a', 'a', '\345'},
-+ {'A', 'E', '\306'}, {'a', 'e', '\346'},
-+ {',', 'C', '\307'}, {',', 'c', '\347'},
-+ {'`', 'E', '\310'}, {'`', 'e', '\350'},
-+ {'\'', 'E', '\311'}, {'\'', 'e', '\351'},
-+ {'^', 'E', '\312'}, {'^', 'e', '\352'},
-+ {'"', 'E', '\313'}, {'"', 'e', '\353'},
-+ {'`', 'I', '\314'}, {'`', 'i', '\354'},
-+ {'\'', 'I', '\315'}, {'\'', 'i', '\355'},
-+ {'^', 'I', '\316'}, {'^', 'i', '\356'},
-+ {'"', 'I', '\317'}, {'"', 'i', '\357'},
-+ {'-', 'D', '\320'}, {'-', 'd', '\360'},
-+ {'~', 'N', '\321'}, {'~', 'n', '\361'},
-+ {'`', 'O', '\322'}, {'`', 'o', '\362'},
-+ {'\'', 'O', '\323'}, {'\'', 'o', '\363'},
-+ {'^', 'O', '\324'}, {'^', 'o', '\364'},
-+ {'~', 'O', '\325'}, {'~', 'o', '\365'},
-+ {'"', 'O', '\326'}, {'"', 'o', '\366'},
-+ {'/', 'O', '\330'}, {'/', 'o', '\370'},
-+ {'`', 'U', '\331'}, {'`', 'u', '\371'},
-+ {'\'', 'U', '\332'}, {'\'', 'u', '\372'},
-+ {'^', 'U', '\333'}, {'^', 'u', '\373'},
-+ {'"', 'U', '\334'}, {'"', 'u', '\374'},
-+ {'\'', 'Y', '\335'}, {'\'', 'y', '\375'},
-+ {'T', 'H', '\336'}, {'t', 'h', '\376'},
-+ {'s', 's', '\337'}, {'"', 'y', '\377'},
-+ {'s', 'z', '\337'}, {'i', 'j', '\377'},
- };
-
- unsigned int accent_table_size = 68;
---- a/drivers/char/defkeymap.map
-+++ b/drivers/char/defkeymap.map
-@@ -1,5 +1,5 @@
- # Default kernel keymap. This uses 7 modifier combinations.
--keymaps 0-2,4-5,8,12
-+keymaps 0-2,4-5,8,12,64
- # Change the above line into
- # keymaps 0-2,4-6,8,12
- # in case you want the entries
-@@ -45,24 +45,38 @@ keycode 12 = minus underscor
- control keycode 12 = Control_underscore
- shift control keycode 12 = Control_underscore
- alt keycode 12 = Meta_minus
--keycode 13 = equal plus
-+keycode 13 = equal plus
- alt keycode 13 = Meta_equal
-+ altgr keycode 13 = asciitilde
-+ ctrll keycode 13 = three
- keycode 14 = Delete Delete
-- control keycode 14 = BackSpace
-+ altgr keycode 14 = BackSpace
- alt keycode 14 = Meta_Delete
- keycode 15 = Tab Tab
- alt keycode 15 = Meta_Tab
- keycode 16 = q
-+ altgr keycode 16 = exclam
- keycode 17 = w
-+ altgr keycode 17 = at
- keycode 18 = e
-- altgr keycode 18 = Hex_E
-+ altgr keycode 18 = numbersign
- keycode 19 = r
-+ altgr keycode 19 = dollar
- keycode 20 = t
-+ altgr keycode 20 = percent
- keycode 21 = y
-+ altgr keycode 21 = asciicircum
- keycode 22 = u
-+ altgr keycode 22 = ampersand
-+ ctrll keycode 22 = seven
- keycode 23 = i
-+ altgr keycode 23 = asterisk
-+ ctrll keycode 23 = eight
- keycode 24 = o
-+ altgr keycode 24 = parenleft
-+ ctrll keycode 24 = nine
- keycode 25 = p
-+ altgr keycode 25 = parenright
- keycode 26 = bracketleft braceleft
- control keycode 26 = Escape
- alt keycode 26 = Meta_bracketleft
-@@ -71,19 +85,28 @@ keycode 27 = bracketright bracerigh
- alt keycode 27 = Meta_bracketright
- keycode 28 = Return
- alt keycode 28 = Meta_Control_m
--keycode 29 = Control
-+keycode 29 = CtrlL
- keycode 30 = a
-- altgr keycode 30 = Hex_A
-+ altgr keycode 30 = U+00B0
- keycode 31 = s
-+ altgr keycode 31 = U+00A8
- keycode 32 = d
-- altgr keycode 32 = Hex_D
-+ altgr keycode 32 = U+20AC
- keycode 33 = f
-- altgr keycode 33 = Hex_F
-+ altgr keycode 33 = minus
- keycode 34 = g
-+ altgr keycode 34 = underscore
- keycode 35 = h
-+ altgr keycode 35 = braceleft
- keycode 36 = j
-+ altgr keycode 36 = bracketleft
-+ ctrll keycode 36 = four
- keycode 37 = k
-+ altgr keycode 37 = bracketright
-+ ctrll keycode 37 = five
- keycode 38 = l
-+ altgr keycode 38 = braceright
-+ ctrll keycode 38 = six
- keycode 39 = semicolon colon
- alt keycode 39 = Meta_semicolon
- keycode 40 = apostrophe quotedbl
-@@ -97,58 +120,65 @@ keycode 43 = backslash bar
- control keycode 43 = Control_backslash
- alt keycode 43 = Meta_backslash
- keycode 44 = z
-+ altgr keycode 44 = nine
- keycode 45 = x
-+ altgr keycode 45 = zero
- keycode 46 = c
- altgr keycode 46 = Hex_C
- keycode 47 = v
- keycode 48 = b
- altgr keycode 48 = Hex_B
- keycode 49 = n
-+ altgr keycode 49 = less
-+ ctrll keycode 49 = one
- keycode 50 = m
--keycode 51 = comma less
-- alt keycode 51 = Meta_comma
--keycode 52 = period greater
-+ altgr keycode 50 = greater
-+ ctrll keycode 50 = two
-+keycode 51 = comma semicolon
-+ altgr keycode 51 = apostrophe
-+keycode 52 = period colon
- control keycode 52 = Compose
-- alt keycode 52 = Meta_period
-+ altgr keycode 52 = quotedbl
- keycode 53 = slash question
- control keycode 53 = Delete
- alt keycode 53 = Meta_slash
--keycode 54 = Shift
-+ ctrll keycode 53 = zero
-+keycode 54 = AltGr
- keycode 55 = KP_Multiply
- keycode 56 = Alt
- keycode 57 = space space
- control keycode 57 = nul
- alt keycode 57 = Meta_space
- keycode 58 = Caps_Lock
--keycode 59 = F1 F11 Console_13
-+keycode 59 = F1 F11 one
- control keycode 59 = F1
- alt keycode 59 = Console_1
- control alt keycode 59 = Console_1
--keycode 60 = F2 F12 Console_14
-+keycode 60 = F2 F12 two
- control keycode 60 = F2
- alt keycode 60 = Console_2
- control alt keycode 60 = Console_2
--keycode 61 = F3 F13 Console_15
-+keycode 61 = F3 F13 three
- control keycode 61 = F3
- alt keycode 61 = Console_3
- control alt keycode 61 = Console_3
--keycode 62 = F4 F14 Console_16
-+keycode 62 = F4 F14 four
- control keycode 62 = F4
- alt keycode 62 = Console_4
- control alt keycode 62 = Console_4
--keycode 63 = F5 F15 Console_17
-+keycode 63 = F5 F15 five
- control keycode 63 = F5
- alt keycode 63 = Console_5
- control alt keycode 63 = Console_5
--keycode 64 = F6 F16 Console_18
-+keycode 64 = F6 F16 six
- control keycode 64 = F6
- alt keycode 64 = Console_6
- control alt keycode 64 = Console_6
--keycode 65 = F7 F17 Console_19
-+keycode 65 = F7 F17 seven
- control keycode 65 = F7
- alt keycode 65 = Console_7
- control alt keycode 65 = Console_7
--keycode 66 = F8 F18 Console_20
-+keycode 66 = F8 F18 eight
- control keycode 66 = F8
- alt keycode 66 = Console_8
- control alt keycode 66 = Console_8
-@@ -220,7 +250,7 @@ keycode 93 =
- keycode 94 =
- keycode 95 =
- keycode 96 = KP_Enter
--keycode 97 = Control
-+keycode 97 = Control
- keycode 98 = KP_Divide
- keycode 99 = Control_backslash
- control keycode 99 = Control_backslash
diff --git a/recipes-kernel/linux/linux-jlime-ben-nanonote_2.6.36.bb b/recipes-kernel/linux/linux-jlime-ben-nanonote_3.12.bb
similarity index 68%
rename from recipes-kernel/linux/linux-jlime-ben-nanonote_2.6.36.bb
rename to recipes-kernel/linux/linux-jlime-ben-nanonote_3.12.bb
index c2c1ade..0a232c0 100644
--- a/recipes-kernel/linux/linux-jlime-ben-nanonote_2.6.36.bb
+++ b/recipes-kernel/linux/linux-jlime-ben-nanonote_3.12.bb
@@ -1,4 +1,4 @@
-DESCRIPTION = "Linux 2.6.36 kernel for the Ben Nanonote"
+DESCRIPTION = "Linux kernel 3.12 for the Ben Nanonote"
SECTION = "kernel"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
@@ -12,13 +12,7 @@ COMPATIBLE_MACHINE = "ben-nanonote"
KERNEL_IMAGETYPE = "vmlinux.bin"
-SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git;protocol=git;branch=v2.6.36-hpc \
- file://logo_linux_clut224.tar.gz \
- file://modifier-keys.patch \
- file://config-ben-nanonote \
- file://jz4740-udc.patch \
- file://fix-gcc-4.6.0-build-errors.patch \
- "
+SRC_URI = "git://projects.qi-hardware.com/qi-kernel.git;protocol=git;branch=jz-3.12"
S = "${WORKDIR}/git"
@@ -27,8 +21,7 @@ inherit kernel
FILES_kernel-image = "/boot/uImage*"
do_configure_prepend() {
- install -m 0644 ${WORKDIR}/config-ben-nanonote ${S}/.config
- mv -f ${WORKDIR}/logo_linux_clut224.ppm ${S}/drivers/video/logo
+ install -m 0644 ${S}/arch/mips/configs/qi_lb60_defconfig ${S}/.config
}
do_install_append() {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [meta-handheld][PATCH 2/2] linux-qi-ben-nanonote: rename previous linux-jlime-ben-nanonote recipe
2014-01-07 18:31 [meta-handheld][PATCH 0/2] Pull request 20140107 Apelete Seketeli
2014-01-07 18:31 ` [meta-handheld][PATCH 1/2] linux-jlime-ben-nanonote: update recipe to kernel 3.12 Apelete Seketeli
@ 2014-01-07 18:31 ` Apelete Seketeli
2014-01-08 22:19 ` [meta-handheld][PATCH 0/2] Pull request 20140107 Paul Eggleton
2 siblings, 0 replies; 4+ messages in thread
From: Apelete Seketeli @ 2014-01-07 18:31 UTC (permalink / raw)
To: openembedded-devel; +Cc: Paul Eggleton
The kernel recipe for the Ben Nanonote machine is now relying on the
Qi-Hardware kernel source code instead of the JLime kernel source code
initially.
Rename linux-jlime-ben-nanonote recipe to linux-qi-ben-nanonote to
reflect the change.
Signed-off-by: Apelete Seketeli <apelete@seketeli.net>
---
conf/machine/ben-nanonote.conf | 2 +-
...inux-jlime-ben-nanonote_3.12.bb => linux-qi-ben-nanonote_3.12.bb} | 0
2 files changed, 1 insertion(+), 1 deletion(-)
rename recipes-kernel/linux/{linux-jlime-ben-nanonote_3.12.bb => linux-qi-ben-nanonote_3.12.bb} (100%)
diff --git a/conf/machine/ben-nanonote.conf b/conf/machine/ben-nanonote.conf
index e09eb70..d5e86bd 100644
--- a/conf/machine/ben-nanonote.conf
+++ b/conf/machine/ben-nanonote.conf
@@ -4,7 +4,7 @@
require conf/machine/include/tune-mips32.inc
-PREFERRED_PROVIDER_virtual/kernel = "linux-jlime-ben-nanonote"
+PREFERRED_PROVIDER_virtual/kernel = "linux-qi-ben-nanonote"
# With 2.6.37 there is not yet uImage target (pending patches)
#KERNEL_IMAGETYPE = "uImage"
diff --git a/recipes-kernel/linux/linux-jlime-ben-nanonote_3.12.bb b/recipes-kernel/linux/linux-qi-ben-nanonote_3.12.bb
similarity index 100%
rename from recipes-kernel/linux/linux-jlime-ben-nanonote_3.12.bb
rename to recipes-kernel/linux/linux-qi-ben-nanonote_3.12.bb
--
1.7.10.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [meta-handheld][PATCH 0/2] Pull request 20140107
2014-01-07 18:31 [meta-handheld][PATCH 0/2] Pull request 20140107 Apelete Seketeli
2014-01-07 18:31 ` [meta-handheld][PATCH 1/2] linux-jlime-ben-nanonote: update recipe to kernel 3.12 Apelete Seketeli
2014-01-07 18:31 ` [meta-handheld][PATCH 2/2] linux-qi-ben-nanonote: rename previous linux-jlime-ben-nanonote recipe Apelete Seketeli
@ 2014-01-08 22:19 ` Paul Eggleton
2 siblings, 0 replies; 4+ messages in thread
From: Paul Eggleton @ 2014-01-08 22:19 UTC (permalink / raw)
To: Apelete Seketeli; +Cc: openembedded-devel
Hi Apelete,
On Tuesday 07 January 2014 19:31:02 Apelete Seketeli wrote:
> The Qi-Hardware community kernel now has an upstream compliant driver
> to provide USB support for the Ben Nanonote, along with other features
> and fixes.
> The aforementioned changes were submitted upstream in order to have
> full upstream support for the Ben kernel.
>
> The patches that come as a follow-up of this message are an attempt to
> provide an up-to-date kernel recipe for the Ben Nanonote in the
> meantime, until the Qi-Hardware patches land upstream.
>
> Changes were built from scratch and successfully tested on device.
These have been merged to meta-handheld master - thanks.
Cheers,
Paul
--
Paul Eggleton
Intel Open Source Technology Centre
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-01-08 22:19 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-07 18:31 [meta-handheld][PATCH 0/2] Pull request 20140107 Apelete Seketeli
2014-01-07 18:31 ` [meta-handheld][PATCH 1/2] linux-jlime-ben-nanonote: update recipe to kernel 3.12 Apelete Seketeli
2014-01-07 18:31 ` [meta-handheld][PATCH 2/2] linux-qi-ben-nanonote: rename previous linux-jlime-ben-nanonote recipe Apelete Seketeli
2014-01-08 22:19 ` [meta-handheld][PATCH 0/2] Pull request 20140107 Paul Eggleton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox