From: Baoquan He <bhe@redhat.com>
To: openrisc@lists.librecores.org
Subject: [OpenRISC] [PATCH 10/15] memblock: make memblock_debug and related functionality private
Date: Thu, 30 Jul 2020 01:54:38 -0000 [thread overview]
Message-ID: <20200730015424.GJ14854@MiWiFi-R3L-srv> (raw)
In-Reply-To: <20200728051153.1590-11-rppt@kernel.org>
On 07/28/20 at 08:11am, Mike Rapoport wrote:
> From: Mike Rapoport <rppt@linux.ibm.com>
>
> The only user of memblock_dbg() outside memblock was s390 setup code and it
> is converted to use pr_debug() instead.
> This allows to stop exposing memblock_debug and memblock_dbg() to the rest
> of the kernel.
>
> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> ---
> arch/s390/kernel/setup.c | 4 ++--
> include/linux/memblock.h | 12 +-----------
> mm/memblock.c | 13 +++++++++++--
> 3 files changed, 14 insertions(+), 15 deletions(-)
Nice clean up.
Reviewed-by: Baoquan He <bhe@redhat.com>
>
> diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
> index 07aa15ba43b3..8b284cf6e199 100644
> --- a/arch/s390/kernel/setup.c
> +++ b/arch/s390/kernel/setup.c
> @@ -776,8 +776,8 @@ static void __init memblock_add_mem_detect_info(void)
> unsigned long start, end;
> int i;
>
> - memblock_dbg("physmem info source: %s (%hhd)\n",
> - get_mem_info_source(), mem_detect.info_source);
> + pr_debug("physmem info source: %s (%hhd)\n",
> + get_mem_info_source(), mem_detect.info_source);
> /* keep memblock lists close to the kernel */
> memblock_set_bottom_up(true);
> for_each_mem_detect_block(i, &start, &end) {
> diff --git a/include/linux/memblock.h b/include/linux/memblock.h
> index 220b5f0dad42..e6a23b3db696 100644
> --- a/include/linux/memblock.h
> +++ b/include/linux/memblock.h
> @@ -90,7 +90,6 @@ struct memblock {
> };
>
> extern struct memblock memblock;
> -extern int memblock_debug;
>
> #ifndef CONFIG_ARCH_KEEP_MEMBLOCK
> #define __init_memblock __meminit
> @@ -102,9 +101,6 @@ void memblock_discard(void);
> static inline void memblock_discard(void) {}
> #endif
>
> -#define memblock_dbg(fmt, ...) \
> - if (memblock_debug) printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
> -
> phys_addr_t memblock_find_in_range(phys_addr_t start, phys_addr_t end,
> phys_addr_t size, phys_addr_t align);
> void memblock_allow_resize(void);
> @@ -456,13 +452,7 @@ bool memblock_is_region_memory(phys_addr_t base, phys_addr_t size);
> bool memblock_is_reserved(phys_addr_t addr);
> bool memblock_is_region_reserved(phys_addr_t base, phys_addr_t size);
>
> -extern void __memblock_dump_all(void);
> -
> -static inline void memblock_dump_all(void)
> -{
> - if (memblock_debug)
> - __memblock_dump_all();
> -}
> +void memblock_dump_all(void);
>
> /**
> * memblock_set_current_limit - Set the current allocation limit to allow
> diff --git a/mm/memblock.c b/mm/memblock.c
> index a5b9b3df81fc..824938849f6d 100644
> --- a/mm/memblock.c
> +++ b/mm/memblock.c
> @@ -134,7 +134,10 @@ struct memblock memblock __initdata_memblock = {
> i < memblock_type->cnt; \
> i++, rgn = &memblock_type->regions[i])
>
> -int memblock_debug __initdata_memblock;
> +#define memblock_dbg(fmt, ...) \
> + if (memblock_debug) printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
> +
> +static int memblock_debug __initdata_memblock;
> static bool system_has_some_mirror __initdata_memblock = false;
> static int memblock_can_resize __initdata_memblock;
> static int memblock_memory_in_slab __initdata_memblock = 0;
> @@ -1919,7 +1922,7 @@ static void __init_memblock memblock_dump(struct memblock_type *type)
> }
> }
>
> -void __init_memblock __memblock_dump_all(void)
> +static void __init_memblock __memblock_dump_all(void)
> {
> pr_info("MEMBLOCK configuration:\n");
> pr_info(" memory size = %pa reserved size = %pa\n",
> @@ -1933,6 +1936,12 @@ void __init_memblock __memblock_dump_all(void)
> #endif
> }
>
> +void __init_memblock memblock_dump_all(void)
> +{
> + if (memblock_debug)
> + __memblock_dump_all();
> +}
> +
> void __init memblock_allow_resize(void)
> {
> memblock_can_resize = 1;
> --
> 2.26.2
>
>
next prev parent reply other threads:[~2020-07-30 1:54 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-28 5:12 [OpenRISC] [PATCH 00/15] memblock: seasonal cleaning^w cleanup Mike Rapoport
2020-07-28 5:12 ` [OpenRISC] [PATCH 01/15] KVM: PPC: Book3S HV: simplify kvm_cma_reserve() Mike Rapoport
2020-07-28 5:12 ` [OpenRISC] [PATCH 02/15] dma-contiguous: simplify cma_early_percent_memory() Mike Rapoport
2020-07-28 6:37 ` Christoph Hellwig
2020-07-28 5:12 ` [OpenRISC] [PATCH 03/15] arm, xtensa: simplify initialization of high memory pages Mike Rapoport
2020-07-28 8:09 ` Max Filippov
2020-07-28 5:12 ` [OpenRISC] [PATCH 04/15] arm64: numa: simplify dummy_numa_init() Mike Rapoport
2020-07-29 8:31 ` Jonathan Cameron
2020-07-30 12:04 ` Catalin Marinas
2020-07-28 5:13 ` [OpenRISC] [PATCH 05/15] h8300, nds32, openrisc: simplify detection of memory extents Mike Rapoport
2020-07-29 11:42 ` Stafford Horne
2020-07-28 5:13 ` [OpenRISC] [PATCH 06/15] powerpc: fadamp: simplify fadump_reserve_crash_area() Mike Rapoport
2020-07-30 12:15 ` Michael Ellerman
2020-08-01 10:19 ` Mike Rapoport
2020-08-01 10:54 ` Hari Bathini
2020-08-02 13:14 ` Michael Ellerman
2020-07-28 5:13 ` [OpenRISC] [PATCH 07/15] riscv: drop unneeded node initialization Mike Rapoport
2020-07-28 5:13 ` [OpenRISC] [PATCH 08/15] mircoblaze: drop unneeded NUMA and sparsemem initializations Mike Rapoport
2020-07-28 5:13 ` [OpenRISC] [PATCH 09/15] memblock: make for_each_memblock_type() iterator private Mike Rapoport
2020-07-30 1:52 ` Baoquan He
2020-07-28 5:13 ` [OpenRISC] [PATCH 10/15] memblock: make memblock_debug and related functionality private Mike Rapoport
2020-07-30 1:54 ` Baoquan He [this message]
2020-07-28 5:14 ` [OpenRISC] [PATCH 11/15] memblock: reduce number of parameters in for_each_mem_range() Mike Rapoport
2020-07-30 2:22 ` Baoquan He
2020-07-28 5:14 ` [OpenRISC] [PATCH 12/15] arch, mm: replace for_each_memblock() with for_each_mem_pfn_range() Mike Rapoport
2020-07-28 5:14 ` [OpenRISC] [PATCH 13/15] arch, drivers: replace for_each_membock() with for_each_mem_range() Mike Rapoport
2020-07-28 15:03 ` Emil Renner Berthing
2020-07-28 5:14 ` [OpenRISC] [PATCH 14/15] x86/numa: remove redundant iteration over memblock.reserved Mike Rapoport
2020-07-28 10:44 ` Ingo Molnar
2020-07-28 10:56 ` Mike Rapoport
2020-07-28 11:31 ` Ingo Molnar
2020-07-28 11:03 ` Baoquan He
2020-07-28 14:15 ` Mike Rapoport
2020-07-28 14:24 ` Baoquan He
2020-07-28 5:14 ` [OpenRISC] [PATCH 15/15] memblock: remove 'type' parameter from for_each_memblock() Mike Rapoport
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200730015424.GJ14854@MiWiFi-R3L-srv \
--to=bhe@redhat.com \
--cc=openrisc@lists.librecores.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox