[OpenRISC] New to OpenRISC

[OpenRISC] New to OpenRISC

[Stafford Horne]

Hello,

Just testing if this new list is ready and working, are there any other 
memebers?  Also, wanted to say Hi and introduce myself.

I have been talkative in the #openrisc channel recently, so most probably 
know me. But, I would like to talk a bit about my background in case 
someone cares:
  - Studied Computer Engineering in University
  - Learned RTL design + verilog there (>10 years ago)
  - No problem with vhdl either
  - Kept an interest in hardware but have a job in software
  - In the past few years I have started to really get back into hardware
    design (both analog and digital). I designed a very simple sdram
    controller in verilog for the de0 nano. I hooked up a self designed
    preamp circuit, dac chip and amp to the de0 nano and built a small
    digital recorder (all hardware, all on github, and demo on youtube)
  - I then looked into running linux on the de0 nano and found OpenRISC.

Thats how I am here. Thats the hardware side; software side is I am OSS 
advocate and have worked on a few projects here and there for the past 15 
years.

-Stafford

stffrdhrn.github.io

[OpenRISC] New to OpenRISC

[Stefan Wallentowitz]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 18.03.2016 21:49, Stafford Horne wrote:
> Hello,
> 
> Just testing if this new list is ready and working, are there any
> other memebers?  Also, wanted to say Hi and introduce myself.
> 
> I have been talkative in the #openrisc channel recently, so most 
> probably know me. But, I would like to talk a bit about my
> background in case someone cares: - Studied Computer Engineering in
> University - Learned RTL design + verilog there (>10 years ago) -
> No problem with vhdl either - Kept an interest in hardware but have
> a job in software - In the past few years I have started to really
> get back into hardware design (both analog and digital). I designed
> a very simple sdram controller in verilog for the de0 nano. I
> hooked up a self designed preamp circuit, dac chip and amp to the
> de0 nano and built a small digital recorder (all hardware, all on
> github, and demo on youtube) - I then looked into running linux on
> the de0 nano and found OpenRISC.
> 
> Thats how I am here. Thats the hardware side; software side is I am
> OSS advocate and have worked on a few projects here and there for
> the past 15 years.
> 
> -Stafford

Hi Stafford,

thanks for the introduction. There are a few members on this list now,
I will crosspost all future posts to lists.opencores.org here, so that
we hopefully switch over here soon.

Thanks for your great work so far, very much appreciated. Welcome to
the OpenRISC community!

Cheers,
Stefan

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2

iEYEARECAAYFAlbtOjAACgkQuMYtsrn2U9zKrACfVFdvJU1IFkTjiPdpnjma0PHO
O5QAmgOA7xgCqhb5/SQLnlZ/LCQO0hnt
=GW65
-----END PGP SIGNATURE-----