From: Xiang W <wxjstz@126.com>
To: opensbi@lists.infradead.org
Subject: [PATCH 2/7] lib: sbi: Add sbi_domain_memregion_init() API
Date: Sun, 11 Apr 2021 15:50:16 +0800 [thread overview]
Message-ID: <a055ff7d7701b64d982922016658b51c748ed152.camel@126.com> (raw)
In-Reply-To: <20210410071808.759856-3-anup.patel@wdc.com>
? 2021-04-10?? 12:48 +0530?Anup Patel???
> This patch adds sbi_domain_memregion_init() helper API which can
> be used by platform support to initialize a domain memory region
> before adding it to the root domain.
>
> Signed-off-by: Anup Patel <anup.patel@wdc.com>
looks good to me.
Reviewed-by: Xiang W <wxjstz@126.com>
Regards,
Xiang W
> ---
> include/sbi/sbi_domain.h | 14 +++++++++++++
> lib/sbi/sbi_domain.c | 45 ++++++++++++++++++++++++++++++++----
> ----
> 2 files changed, 50 insertions(+), 9 deletions(-)
>
> diff --git a/include/sbi/sbi_domain.h b/include/sbi/sbi_domain.h
> index 1f8b942..f9f4f7d 100644
> --- a/include/sbi/sbi_domain.h
> +++ b/include/sbi/sbi_domain.h
> @@ -127,6 +127,20 @@ ulong sbi_domain_get_assigned_hartmask(const
> struct sbi_domain *dom,
> /** Initialize a domain memory region as firmware region */
> void sbi_domain_memregion_initfw(struct sbi_domain_memregion *reg);
>
> +/**
> + * Initialize a domain memory region based on it's physical
> + * address and size.
> + *
> + * @param addr start physical address of memory region
> + * @param size physical size of memory region
> + * @param flags memory region flags
> + * @param reg pointer to memory region being initialized
> + */
> +void sbi_domain_memregion_init(unsigned long addr,
> + unsigned long size,
> + unsigned long flags,
> + struct sbi_domain_memregion *reg);
> +
> /**
> * Check whether we can access specified address for given mode and
> * memory region flags under a domain
> diff --git a/lib/sbi/sbi_domain.c b/lib/sbi/sbi_domain.c
> index 2849241..164f35c 100644
> --- a/lib/sbi/sbi_domain.c
> +++ b/lib/sbi/sbi_domain.c
> @@ -72,6 +72,35 @@ void sbi_domain_memregion_initfw(struct
> sbi_domain_memregion *reg)
> sbi_memcpy(reg, &root_memregs[ROOT_FW_REGION], sizeof(*reg));
> }
>
> +void sbi_domain_memregion_init(unsigned long addr,
> + unsigned long size,
> + unsigned long flags,
> + struct sbi_domain_memregion *reg)
> +{
> + unsigned long base = 0, order;
> +
> + for (order = log2roundup(size) ; order <= __riscv_xlen;
> order++) {
> + if (order < __riscv_xlen) {
> + base = addr & ~((1UL << order) - 1UL);
> + if ((base <= addr) &&
> + (addr < (base + (1UL << order))) &&
> + (base <= (addr + size - 1UL)) &&
> + ((addr + size - 1UL) < (base + (1UL <<
> order))))
> + break;
> + } else {
> + base = 0;
> + break;
> + }
> +
> + }
> +
> + if (reg) {
> + reg->base = base;
> + reg->order = order;
> + reg->flags = flags;
> + }
> +}
> +
> bool sbi_domain_check_addr(const struct sbi_domain *dom,
> unsigned long addr, unsigned long mode,
> unsigned long access_flags)
> @@ -507,17 +536,15 @@ int sbi_domain_init(struct sbi_scratch
> *scratch, u32 cold_hartid)
> const struct sbi_platform *plat = sbi_platform_ptr(scratch);
>
> /* Root domain firmware memory region */
> - root_memregs[ROOT_FW_REGION].order = log2roundup(scratch-
> >fw_size);
> - root_memregs[ROOT_FW_REGION].base = scratch->fw_start &
> - ~((1UL << root_memregs[0].order) -
> 1UL);
> - root_memregs[ROOT_FW_REGION].flags = 0;
> + sbi_domain_memregion_init(scratch->fw_start, scratch->fw_size,
> 0,
> + &root_memregs[ROOT_FW_REGION]);
>
> /* Root domain allow everything memory region */
> - root_memregs[ROOT_ALL_REGION].order = __riscv_xlen;
> - root_memregs[ROOT_ALL_REGION].base = 0;
> - root_memregs[ROOT_ALL_REGION].flags =
> (SBI_DOMAIN_MEMREGION_READABLE |
> - SBI_DOMAIN_MEMREGION_WR
> ITEABLE |
> - SBI_DOMAIN_MEMREGION_EX
> ECUTABLE);
> + sbi_domain_memregion_init(0, ~0UL,
> + (SBI_DOMAIN_MEMREGION_READABLE |
> + SBI_DOMAIN_MEMREGION_WRITEABLE |
> + SBI_DOMAIN_MEMREGION_EXECUTABLE),
> + &root_memregs[ROOT_ALL_REGION]);
>
> /* Root domain memory region end */
> root_memregs[ROOT_END_REGION].order = 0;
> --
> 2.25.1
>
>
next prev parent reply other threads:[~2021-04-11 7:50 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-10 7:18 [PATCH 0/7] Protect M-mode only MMIO devices Anup Patel
2021-04-10 7:18 ` [PATCH 1/7] lib: sbi: Domains can be registered only before finalizing domains Anup Patel
2021-04-11 7:49 ` Xiang W
2021-04-11 21:19 ` Alistair Francis
2021-04-10 7:18 ` [PATCH 2/7] lib: sbi: Add sbi_domain_memregion_init() API Anup Patel
2021-04-11 7:50 ` Xiang W [this message]
2021-04-11 21:22 ` Alistair Francis
2021-04-10 7:18 ` [PATCH 3/7] lib: sbi: Add sbi_domain_root_add_memregion() API Anup Patel
2021-04-11 8:43 ` Xiang W
2021-04-11 21:27 ` Alistair Francis
2021-04-10 7:18 ` [PATCH 4/7] lib: utils/sys: Add CLINT memregion in the root domain Anup Patel
2021-04-11 9:05 ` Xiang W
2021-04-12 5:23 ` Anup Patel
2021-04-12 5:42 ` Xiang W
2021-04-12 6:24 ` Anup Patel
2021-04-10 7:18 ` [PATCH 5/7] lib: sbi: Make the root domain instance global variable Anup Patel
2021-04-11 10:07 ` Xiang W
2021-04-11 21:29 ` Alistair Francis
2021-04-10 7:18 ` [PATCH 6/7] lib: utils: Copy over restricted root domain memregions to FDT domains Anup Patel
2021-04-11 10:07 ` Xiang W
2021-04-11 21:30 ` Alistair Francis
2021-04-10 7:18 ` [PATCH 7/7] lib: sbi: Make sbi_domain_memregion_initfw() a local function Anup Patel
2021-04-11 10:07 ` Xiang W
2021-04-11 21:32 ` Alistair Francis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a055ff7d7701b64d982922016658b51c748ed152.camel@126.com \
--to=wxjstz@126.com \
--cc=opensbi@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox