[PATCH AUTOSEL 5.4 012/134] platform/x86: peaq-wmi: switch to using polled mode of input devices

[PATCH AUTOSEL 5.4 012/134] platform/x86: peaq-wmi: switch to using polled mode of input devices

[Sasha Levin]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit 60d15095336cfb56dce5c7767ed3b8c6c1cf79a3 ]

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts peaq-wmi driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Because the new polling coded does not allow peeking inside the poller
structure to get the poll interval, we change the "debounce" process to
operate on the time basis, instead of counting events.

We also fix error handling during initialization, as previously we leaked
input device structure when we failed to register it.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/Kconfig    |  1 -
 drivers/platform/x86/peaq-wmi.c | 66 +++++++++++++++++++++------------
 2 files changed, 42 insertions(+), 25 deletions(-)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index ae21d08c65e8d..1cab993205142 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -806,7 +806,6 @@ config PEAQ_WMI
 	tristate "PEAQ 2-in-1 WMI hotkey driver"
 	depends on ACPI_WMI
 	depends on INPUT
-	select INPUT_POLLDEV
 	help
 	 Say Y here if you want to support WMI-based hotkeys on PEAQ 2-in-1s.
 
diff --git a/drivers/platform/x86/peaq-wmi.c b/drivers/platform/x86/peaq-wmi.c
index fdeb3624c529c..cf9c44c20a829 100644
--- a/drivers/platform/x86/peaq-wmi.c
+++ b/drivers/platform/x86/peaq-wmi.c
@@ -6,7 +6,7 @@
 
 #include <linux/acpi.h>
 #include <linux/dmi.h>
-#include <linux/input-polldev.h>
+#include <linux/input.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 
@@ -18,8 +18,7 @@
 
 MODULE_ALIAS("wmi:"PEAQ_DOLBY_BUTTON_GUID);
 
-static unsigned int peaq_ignore_events_counter;
-static struct input_polled_dev *peaq_poll_dev;
+static struct input_dev *peaq_poll_dev;
 
 /*
  * The Dolby button (yes really a Dolby button) causes an ACPI variable to get
@@ -28,8 +27,10 @@ static struct input_polled_dev *peaq_poll_dev;
  * (if polling after the release) or twice (polling between press and release).
  * We ignore events for 0.5s after the first event to avoid reporting 2 presses.
  */
-static void peaq_wmi_poll(struct input_polled_dev *dev)
+static void peaq_wmi_poll(struct input_dev *input_dev)
 {
+	static unsigned long last_event_time;
+	static bool had_events;
 	union acpi_object obj;
 	acpi_status status;
 	u32 dummy = 0;
@@ -44,22 +45,25 @@ static void peaq_wmi_poll(struct input_polled_dev *dev)
 		return;
 
 	if (obj.type != ACPI_TYPE_INTEGER) {
-		dev_err(&peaq_poll_dev->input->dev,
+		dev_err(&input_dev->dev,
 			"Error WMBC did not return an integer\n");
 		return;
 	}
 
-	if (peaq_ignore_events_counter && peaq_ignore_events_counter--)
+	if (!obj.integer.value)
 		return;
 
-	if (obj.integer.value) {
-		input_event(peaq_poll_dev->input, EV_KEY, KEY_SOUND, 1);
-		input_sync(peaq_poll_dev->input);
-		input_event(peaq_poll_dev->input, EV_KEY, KEY_SOUND, 0);
-		input_sync(peaq_poll_dev->input);
-		peaq_ignore_events_counter = max(1u,
-			PEAQ_POLL_IGNORE_MS / peaq_poll_dev->poll_interval);
-	}
+	if (had_events && time_before(jiffies, last_event_time +
+					msecs_to_jiffies(PEAQ_POLL_IGNORE_MS)))
+		return;
+
+	input_event(input_dev, EV_KEY, KEY_SOUND, 1);
+	input_sync(input_dev);
+	input_event(input_dev, EV_KEY, KEY_SOUND, 0);
+	input_sync(input_dev);
+
+	last_event_time = jiffies;
+	had_events = true;
 }
 
 /* Some other devices (Shuttle XS35) use the same WMI GUID for other purposes */
@@ -75,6 +79,8 @@ static const struct dmi_system_id peaq_dmi_table[] __initconst = {
 
 static int __init peaq_wmi_init(void)
 {
+	int err;
+
 	/* WMI GUID is not unique, also check for a DMI match */
 	if (!dmi_check_system(peaq_dmi_table))
 		return -ENODEV;
@@ -82,24 +88,36 @@ static int __init peaq_wmi_init(void)
 	if (!wmi_has_guid(PEAQ_DOLBY_BUTTON_GUID))
 		return -ENODEV;
 
-	peaq_poll_dev = input_allocate_polled_device();
+	peaq_poll_dev = input_allocate_device();
 	if (!peaq_poll_dev)
 		return -ENOMEM;
 
-	peaq_poll_dev->poll = peaq_wmi_poll;
-	peaq_poll_dev->poll_interval = PEAQ_POLL_INTERVAL_MS;
-	peaq_poll_dev->poll_interval_max = PEAQ_POLL_MAX_MS;
-	peaq_poll_dev->input->name = "PEAQ WMI hotkeys";
-	peaq_poll_dev->input->phys = "wmi/input0";
-	peaq_poll_dev->input->id.bustype = BUS_HOST;
-	input_set_capability(peaq_poll_dev->input, EV_KEY, KEY_SOUND);
+	peaq_poll_dev->name = "PEAQ WMI hotkeys";
+	peaq_poll_dev->phys = "wmi/input0";
+	peaq_poll_dev->id.bustype = BUS_HOST;
+	input_set_capability(peaq_poll_dev, EV_KEY, KEY_SOUND);
+
+	err = input_setup_polling(peaq_poll_dev, peaq_wmi_poll);
+	if (err)
+		goto err_out;
+
+	input_set_poll_interval(peaq_poll_dev, PEAQ_POLL_INTERVAL_MS);
+	input_set_max_poll_interval(peaq_poll_dev, PEAQ_POLL_MAX_MS);
+
+	err = input_register_device(peaq_poll_dev);
+	if (err)
+		goto err_out;
+
+	return 0;
 
-	return input_register_polled_device(peaq_poll_dev);
+err_out:
+	input_free_device(peaq_poll_dev);
+	return err;
 }
 
 static void __exit peaq_wmi_exit(void)
 {
-	input_unregister_polled_device(peaq_poll_dev);
+	input_unregister_device(peaq_poll_dev);
 }
 
 module_init(peaq_wmi_init);
-- 
2.20.1

[PATCH AUTOSEL 5.4 102/134] platform/x86: intel_pmc_core: Fix the SoC naming inconsistency

[Sasha Levin]

From: Gayatri Kammela <gayatri.kammela@intel.com>

[ Upstream commit 43e82d8aa92503d264309fb648b251b2d85caf1a ]

Intel's SoCs follow a naming convention which spells out the SoC name as
two words instead of one word (E.g: Cannon Lake vs Cannonlake). Thus fix
the naming inconsistency across the intel_pmc_core driver, so future
SoCs can follow the naming consistency as below.

Cometlake -> Comet Lake
Tigerlake -> Tiger Lake
Elkhartlake -> Elkhart Lake

Cc: Mario Limonciello <mario.limonciello@dell.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: David E. Box <david.e.box@intel.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel_pmc_core.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
index 94a008efb09b8..6b6edc30f8359 100644
--- a/drivers/platform/x86/intel_pmc_core.c
+++ b/drivers/platform/x86/intel_pmc_core.c
@@ -158,7 +158,7 @@ static const struct pmc_reg_map spt_reg_map = {
 	.pm_vric1_offset = SPT_PMC_VRIC1_OFFSET,
 };
 
-/* Cannonlake: PGD PFET Enable Ack Status Register(s) bitmap */
+/* Cannon Lake: PGD PFET Enable Ack Status Register(s) bitmap */
 static const struct pmc_bit_map cnp_pfear_map[] = {
 	{"PMC",                 BIT(0)},
 	{"OPI-DMI",             BIT(1)},
@@ -185,7 +185,7 @@ static const struct pmc_bit_map cnp_pfear_map[] = {
 	{"SDX",                 BIT(4)},
 	{"SPE",                 BIT(5)},
 	{"Fuse",                BIT(6)},
-	/* Reserved for Cannonlake but valid for Icelake */
+	/* Reserved for Cannon Lake but valid for Ice Lake */
 	{"SBR8",		BIT(7)},
 
 	{"CSME_FSC",            BIT(0)},
@@ -229,12 +229,12 @@ static const struct pmc_bit_map cnp_pfear_map[] = {
 	{"HDA_PGD4",            BIT(2)},
 	{"HDA_PGD5",            BIT(3)},
 	{"HDA_PGD6",            BIT(4)},
-	/* Reserved for Cannonlake but valid for Icelake */
+	/* Reserved for Cannon Lake but valid for Ice Lake */
 	{"PSF6",		BIT(5)},
 	{"PSF7",		BIT(6)},
 	{"PSF8",		BIT(7)},
 
-	/* Icelake generation onwards only */
+	/* Ice Lake generation onwards only */
 	{"RES_65",		BIT(0)},
 	{"RES_66",		BIT(1)},
 	{"RES_67",		BIT(2)},
@@ -324,7 +324,7 @@ static const struct pmc_bit_map cnp_ltr_show_map[] = {
 	{"ISH",			CNP_PMC_LTR_ISH},
 	{"UFSX2",		CNP_PMC_LTR_UFSX2},
 	{"EMMC",		CNP_PMC_LTR_EMMC},
-	/* Reserved for Cannonlake but valid for Icelake */
+	/* Reserved for Cannon Lake but valid for Ice Lake */
 	{"WIGIG",		ICL_PMC_LTR_WIGIG},
 	/* Below two cannot be used for LTR_IGNORE */
 	{"CURRENT_PLATFORM",	CNP_PMC_LTR_CUR_PLT},
@@ -871,8 +871,8 @@ static int pmc_core_probe(struct platform_device *pdev)
 	pmcdev->map = (struct pmc_reg_map *)cpu_id->driver_data;
 
 	/*
-	 * Coffeelake has CPU ID of Kabylake and Cannonlake PCH. So here
-	 * Sunrisepoint PCH regmap can't be used. Use Cannonlake PCH regmap
+	 * Coffee Lake has CPU ID of Kaby Lake and Cannon Lake PCH. So here
+	 * Sunrisepoint PCH regmap can't be used. Use Cannon Lake PCH regmap
 	 * in this case.
 	 */
 	if (pmcdev->map == &spt_reg_map && !pci_dev_present(pmc_pci_ids))
-- 
2.20.1

[PATCH AUTOSEL 5.4 103/134] platform/x86: intel_pmc_core: Add Comet Lake (CML) platform support to intel_pmc_core driver

[Sasha Levin]

From: Gayatri Kammela <gayatri.kammela@intel.com>

[ Upstream commit 5406327d43edd9a171bd260f49c752d148727eaf ]

Add Comet Lake to the list of the platforms that intel_pmc_core driver
supports for pmc_core device.

Just like Ice Lake, Comet Lake can also reuse all the Cannon Lake PCH
IPs. No additional effort is needed to enable but to simply reuse them.

Cc: Mario Limonciello <mario.limonciello@dell.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: David E. Box <david.e.box@intel.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel_pmc_core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
index 6b6edc30f8359..571b4754477c5 100644
--- a/drivers/platform/x86/intel_pmc_core.c
+++ b/drivers/platform/x86/intel_pmc_core.c
@@ -160,6 +160,7 @@ static const struct pmc_reg_map spt_reg_map = {
 
 /* Cannon Lake: PGD PFET Enable Ack Status Register(s) bitmap */
 static const struct pmc_bit_map cnp_pfear_map[] = {
+	/* Reserved for Cannon Lake but valid for Comet Lake */
 	{"PMC",                 BIT(0)},
 	{"OPI-DMI",             BIT(1)},
 	{"SPI/eSPI",            BIT(2)},
@@ -185,7 +186,7 @@ static const struct pmc_bit_map cnp_pfear_map[] = {
 	{"SDX",                 BIT(4)},
 	{"SPE",                 BIT(5)},
 	{"Fuse",                BIT(6)},
-	/* Reserved for Cannon Lake but valid for Ice Lake */
+	/* Reserved for Cannon Lake but valid for Ice Lake and Comet Lake */
 	{"SBR8",		BIT(7)},
 
 	{"CSME_FSC",            BIT(0)},
@@ -229,7 +230,7 @@ static const struct pmc_bit_map cnp_pfear_map[] = {
 	{"HDA_PGD4",            BIT(2)},
 	{"HDA_PGD5",            BIT(3)},
 	{"HDA_PGD6",            BIT(4)},
-	/* Reserved for Cannon Lake but valid for Ice Lake */
+	/* Reserved for Cannon Lake but valid for Ice Lake and Comet Lake */
 	{"PSF6",		BIT(5)},
 	{"PSF7",		BIT(6)},
 	{"PSF8",		BIT(7)},
@@ -813,6 +814,8 @@ static const struct x86_cpu_id intel_pmc_core_ids[] = {
 	INTEL_CPU_FAM6(CANNONLAKE_L, cnp_reg_map),
 	INTEL_CPU_FAM6(ICELAKE_L, icl_reg_map),
 	INTEL_CPU_FAM6(ICELAKE_NNPI, icl_reg_map),
+	INTEL_CPU_FAM6(COMETLAKE, cnp_reg_map),
+	INTEL_CPU_FAM6(COMETLAKE_L, cnp_reg_map),
 	{}
 };
 
-- 
2.20.1