[PATCH AUTOSEL 5.10 12/28] platform/x86: thinkpad_acpi: Add support for dual fan control

[PATCH AUTOSEL 5.10 12/28] platform/x86: thinkpad_acpi: Add support for dual fan control

[Sasha Levin]

From: Jimmy Wang <jimmy221b@163.com>

[ Upstream commit 1f338954a5fbe21eb22b4223141e31f2a26366d5 ]

   This adds dual fan control for P1 / X1 Extreme Gen4

Signed-off-by: Jimmy Wang <jimmy221b@163.com>
Link: https://lore.kernel.org/r/20211105090528.39677-1-jimmy221b@163.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/thinkpad_acpi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 2a313643e0388..840bbc312aedd 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -8805,6 +8805,7 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_Q_LNV3('N', '2', 'E', TPACPI_FAN_2CTL),	/* P1 / X1 Extreme (1st gen) */
 	TPACPI_Q_LNV3('N', '2', 'O', TPACPI_FAN_2CTL),	/* P1 / X1 Extreme (2nd gen) */
 	TPACPI_Q_LNV3('N', '2', 'V', TPACPI_FAN_2CTL),	/* P1 / X1 Extreme (3nd gen) */
+	TPACPI_Q_LNV3('N', '4', '0', TPACPI_FAN_2CTL),	/* P1 / X1 Extreme (4nd gen) */
 	TPACPI_Q_LNV3('N', '3', '0', TPACPI_FAN_2CTL),	/* P15 (1st gen) / P15v (1st gen) */
 	TPACPI_Q_LNV3('N', '3', '2', TPACPI_FAN_2CTL),	/* X1 Carbon (9th gen) */
 };
-- 
2.33.0

[PATCH AUTOSEL 5.10 13/28] platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep

[Sasha Levin]

From: Slark Xiao <slark_xiao@163.com>

[ Upstream commit 39f53292181081d35174a581a98441de5da22bc9 ]

When WWAN device wake from S3 deep, under thinkpad platform,
WWAN would be disabled. This disable status could be checked
by command 'nmcli r wwan' or 'rfkill list'.

Issue analysis as below:
  When host resume from S3 deep, thinkpad_acpi driver would
call hotkey_resume() function. Finnaly, it will use
wan_get_status to check the current status of WWAN device.
During this resume progress, wan_get_status would always
return off even WWAN boot up completely.
  In patch V2, Hans said 'sw_state should be unchanged
after a suspend/resume. It's better to drop the
tpacpi_rfk_update_swstate call all together from the
resume path'.
  And it's confimed by Lenovo that GWAN is no longer
 available from WHL generation because the design does not
 match with current pin control.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20211108060648.8212-1-slark_xiao@163.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/thinkpad_acpi.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 840bbc312aedd..d8d241344d22d 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -1170,15 +1170,6 @@ static int tpacpi_rfk_update_swstate(const struct tpacpi_rfk *tp_rfk)
 	return status;
 }
 
-/* Query FW and update rfkill sw state for all rfkill switches */
-static void tpacpi_rfk_update_swstate_all(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < TPACPI_RFK_SW_MAX; i++)
-		tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[i]);
-}
-
 /*
  * Sync the HW-blocking state of all rfkill switches,
  * do notice it causes the rfkill core to schedule uevents
@@ -3121,9 +3112,6 @@ static void tpacpi_send_radiosw_update(void)
 	if (wlsw == TPACPI_RFK_RADIO_OFF)
 		tpacpi_rfk_update_hwblock_state(true);
 
-	/* Sync sw blocking state */
-	tpacpi_rfk_update_swstate_all();
-
 	/* Sync hw blocking state last if it is hw-unblocked */
 	if (wlsw == TPACPI_RFK_RADIO_ON)
 		tpacpi_rfk_update_hwblock_state(false);
-- 
2.33.0