[PATCH AUTOSEL 5.15 22/31] platform/x86: intel: hid: Always call BTNL ACPI method

[PATCH AUTOSEL 5.15 22/31] platform/x86: intel: hid: Always call BTNL ACPI method

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit e3ab18de2b09361d6f0e4aafb9cfd6d002ce43a1 ]

On a HP Elite Dragonfly G2 the 0xcc and 0xcd events for SW_TABLET_MODE
are only send after the BTNL ACPI method has been called.

Likely more devices need this, so make the BTNL ACPI method unconditional
instead of only doing it on devices with a 5 button array.

Note this also makes the intel_button_array_enable() call in probe()
unconditional, that function does its own priv->array check. This makes
the intel_button_array_enable() call in probe() consistent with the calls
done on suspend/resume which also rely on the priv->array check inside
the function.

Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/20230712175023.31651-1-maxtram95@gmail.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230715181516.5173-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel/hid.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/platform/x86/intel/hid.c b/drivers/platform/x86/intel/hid.c
index 4d1c78635114e..73ecbdfcfb7c0 100644
--- a/drivers/platform/x86/intel/hid.c
+++ b/drivers/platform/x86/intel/hid.c
@@ -608,7 +608,7 @@ static bool button_array_present(struct platform_device *device)
 static int intel_hid_probe(struct platform_device *device)
 {
 	acpi_handle handle = ACPI_HANDLE(&device->dev);
-	unsigned long long mode;
+	unsigned long long mode, dummy;
 	struct intel_hid_priv *priv;
 	acpi_status status;
 	int err;
@@ -673,18 +673,15 @@ static int intel_hid_probe(struct platform_device *device)
 	if (err)
 		goto err_remove_notify;
 
-	if (priv->array) {
-		unsigned long long dummy;
+	intel_button_array_enable(&device->dev, true);
 
-		intel_button_array_enable(&device->dev, true);
-
-		/* Call button load method to enable HID power button */
-		if (!intel_hid_evaluate_method(handle, INTEL_HID_DSM_BTNL_FN,
-					       &dummy)) {
-			dev_warn(&device->dev,
-				 "failed to enable HID power button\n");
-		}
-	}
+	/*
+	 * Call button load method to enable HID power button
+	 * Always do this since it activates events on some devices without
+	 * a button array too.
+	 */
+	if (!intel_hid_evaluate_method(handle, INTEL_HID_DSM_BTNL_FN, &dummy))
+		dev_warn(&device->dev, "failed to enable HID power button\n");
 
 	device_init_wakeup(&device->dev, true);
 	/*
-- 
2.40.1

[PATCH AUTOSEL 5.15 23/31] platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirks

[Sasha Levin]

From: Maxim Mikityanskiy <maxtram95@gmail.com>

[ Upstream commit 7783e97f8558ad7a4d1748922461bc88483fbcdf ]

HP Elite Dragonfly G2 (a convertible laptop/tablet) has a reliable VGBS
method. If VGBS is not called on boot, the firmware sends an initial
0xcd event shortly after calling the BTNL method, but only if the device
is booted in the laptop mode. However, if the device is booted in the
tablet mode and VGBS is not called, there is no initial 0xcc event, and
the input device for SW_TABLET_MODE is not registered up until the user
turns the device into the laptop mode.

Call VGBS on boot on this device to get the initial state of
SW_TABLET_MODE in a reliable way.

Tested with BIOS 1.13.1.

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20230716183213.64173-1-maxtram95@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel/hid.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/platform/x86/intel/hid.c b/drivers/platform/x86/intel/hid.c
index 73ecbdfcfb7c0..f59a3cc9767b9 100644
--- a/drivers/platform/x86/intel/hid.c
+++ b/drivers/platform/x86/intel/hid.c
@@ -138,6 +138,12 @@ static const struct dmi_system_id dmi_vgbs_allow_list[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Surface Go"),
 		},
 	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Elite Dragonfly G2 Notebook PC"),
+		},
+	},
 	{ }
 };
 
-- 
2.40.1

[PATCH AUTOSEL 5.15 24/31] platform/x86: huawei-wmi: Silence ambient light sensor

[Sasha Levin]

From: Konstantin Shelekhin <k.shelekhin@ftml.net>

[ Upstream commit c21733754cd6ecbca346f2adf9b17d4cfa50504f ]

Currently huawei-wmi causes a lot of spam in dmesg on my
Huawei MateBook X Pro 2022:

  ...
  [36409.328463] input input9: Unknown key pressed, code: 0x02c1
  [36411.335104] input input9: Unknown key pressed, code: 0x02c1
  [36412.338674] input input9: Unknown key pressed, code: 0x02c1
  [36414.848564] input input9: Unknown key pressed, code: 0x02c1
  [36416.858706] input input9: Unknown key pressed, code: 0x02c1
  ...

Fix that by ignoring events generated by ambient light sensor.

This issue was reported on GitHub and resolved with the following merge
request:

  https://github.com/aymanbagabas/Huawei-WMI/pull/70

I've contacted the mainter of this repo and he gave me the "go ahead" to
send this patch to the maling list.

Signed-off-by: Konstantin Shelekhin <k.shelekhin@ftml.net>
Link: https://lore.kernel.org/r/20230722155922.173856-1-k.shelekhin@ftml.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/huawei-wmi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/platform/x86/huawei-wmi.c b/drivers/platform/x86/huawei-wmi.c
index 935562c870c3d..23ebd0c046e16 100644
--- a/drivers/platform/x86/huawei-wmi.c
+++ b/drivers/platform/x86/huawei-wmi.c
@@ -86,6 +86,8 @@ static const struct key_entry huawei_wmi_keymap[] = {
 	{ KE_IGNORE, 0x293, { KEY_KBDILLUMTOGGLE } },
 	{ KE_IGNORE, 0x294, { KEY_KBDILLUMUP } },
 	{ KE_IGNORE, 0x295, { KEY_KBDILLUMUP } },
+	// Ignore Ambient Light Sensoring
+	{ KE_KEY,    0x2c1, { KEY_RESERVED } },
 	{ KE_END,	 0 }
 };
 
-- 
2.40.1