[PATCH AUTOSEL 6.9 05/23] platform/x86: toshiba_acpi: Add quirk for buttons on Z830

[PATCH AUTOSEL 6.9 05/23] platform/x86: toshiba_acpi: Add quirk for buttons on Z830

[Sasha Levin]

From: Arvid Norlander <lkml@vorpal.se>

[ Upstream commit 23f1d8b47d125dcd8c1ec62a91164e6bc5d691d0 ]

The Z830 has some buttons that will only work properly as "quickstart"
buttons. To enable them in that mode, a value between 1 and 7 must be
used for HCI_HOTKEY_EVENT. Windows uses 0x5 on this laptop so use that for
maximum predictability and compatibility.

As there is not yet a known way of auto detection, this patch uses a DMI
quirk table. A module parameter is exposed to allow setting this on other
models for testing.

Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240131111641.4418-3-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/toshiba_acpi.c | 36 ++++++++++++++++++++++++++---
 1 file changed, 33 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 77244c9aa60d2..16e941449b144 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -57,6 +57,11 @@ module_param(turn_on_panel_on_resume, int, 0644);
 MODULE_PARM_DESC(turn_on_panel_on_resume,
 	"Call HCI_PANEL_POWER_ON on resume (-1 = auto, 0 = no, 1 = yes");
 
+static int hci_hotkey_quickstart = -1;
+module_param(hci_hotkey_quickstart, int, 0644);
+MODULE_PARM_DESC(hci_hotkey_quickstart,
+		 "Call HCI_HOTKEY_EVENT with value 0x5 for quickstart button support (-1 = auto, 0 = no, 1 = yes");
+
 #define TOSHIBA_WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100"
 
 /* Scan code for Fn key on TOS1900 models */
@@ -136,6 +141,7 @@ MODULE_PARM_DESC(turn_on_panel_on_resume,
 #define HCI_ACCEL_MASK			0x7fff
 #define HCI_ACCEL_DIRECTION_MASK	0x8000
 #define HCI_HOTKEY_DISABLE		0x0b
+#define HCI_HOTKEY_ENABLE_QUICKSTART	0x05
 #define HCI_HOTKEY_ENABLE		0x09
 #define HCI_HOTKEY_SPECIAL_FUNCTIONS	0x10
 #define HCI_LCD_BRIGHTNESS_BITS		3
@@ -2731,10 +2737,15 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)
 		return -ENODEV;
 
 	/*
+	 * Enable quickstart buttons if supported.
+	 *
 	 * Enable the "Special Functions" mode only if they are
 	 * supported and if they are activated.
 	 */
-	if (dev->kbd_function_keys_supported && dev->special_functions)
+	if (hci_hotkey_quickstart)
+		result = hci_write(dev, HCI_HOTKEY_EVENT,
+				   HCI_HOTKEY_ENABLE_QUICKSTART);
+	else if (dev->kbd_function_keys_supported && dev->special_functions)
 		result = hci_write(dev, HCI_HOTKEY_EVENT,
 				   HCI_HOTKEY_SPECIAL_FUNCTIONS);
 	else
@@ -3258,7 +3269,14 @@ static const char *find_hci_method(acpi_handle handle)
  * works. toshiba_acpi_resume() uses HCI_PANEL_POWER_ON to avoid changing
  * the configured brightness level.
  */
-static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
+#define QUIRK_TURN_ON_PANEL_ON_RESUME		BIT(0)
+/*
+ * Some Toshibas use "quickstart" keys. On these, HCI_HOTKEY_EVENT must use
+ * the value HCI_HOTKEY_ENABLE_QUICKSTART.
+ */
+#define QUIRK_HCI_HOTKEY_QUICKSTART		BIT(1)
+
+static const struct dmi_system_id toshiba_dmi_quirks[] = {
 	{
 	 /* Toshiba Portégé R700 */
 	 /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
@@ -3266,6 +3284,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
 		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R700"),
 		},
+	 .driver_data = (void *)QUIRK_TURN_ON_PANEL_ON_RESUME,
 	},
 	{
 	 /* Toshiba Satellite/Portégé R830 */
@@ -3275,6 +3294,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
 		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "R830"),
 		},
+	 .driver_data = (void *)QUIRK_TURN_ON_PANEL_ON_RESUME,
 	},
 	{
 	 /* Toshiba Satellite/Portégé Z830 */
@@ -3282,6 +3302,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
 		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "Z830"),
 		},
+	 .driver_data = (void *)(QUIRK_TURN_ON_PANEL_ON_RESUME | QUIRK_HCI_HOTKEY_QUICKSTART),
 	},
 };
 
@@ -3290,6 +3311,8 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 	struct toshiba_acpi_dev *dev;
 	const char *hci_method;
 	u32 dummy;
+	const struct dmi_system_id *dmi_id;
+	long quirks = 0;
 	int ret = 0;
 
 	if (toshiba_acpi)
@@ -3442,8 +3465,15 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 	}
 #endif
 
+	dmi_id = dmi_first_match(toshiba_dmi_quirks);
+	if (dmi_id)
+		quirks = (long)dmi_id->driver_data;
+
 	if (turn_on_panel_on_resume == -1)
-		turn_on_panel_on_resume = dmi_check_system(turn_on_panel_on_resume_dmi_ids);
+		turn_on_panel_on_resume = !!(quirks & QUIRK_TURN_ON_PANEL_ON_RESUME);
+
+	if (hci_hotkey_quickstart == -1)
+		hci_hotkey_quickstart = !!(quirks & QUIRK_HCI_HOTKEY_QUICKSTART);
 
 	toshiba_wwan_available(dev);
 	if (dev->wwan_supported)
-- 
2.43.0

[PATCH AUTOSEL 6.9 13/23] platform/x86: x86-android-tablets: Unregister devices in reverse order

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 3de0f2627ef849735f155c1818247f58404dddfe ]

Not all subsystems support a device getting removed while there are
still consumers of the device with a reference to the device.

One example of this is the regulator subsystem. If a regulator gets
unregistered while there are still drivers holding a reference
a WARN() at drivers/regulator/core.c:5829 triggers, e.g.:

 WARNING: CPU: 1 PID: 1587 at drivers/regulator/core.c:5829 regulator_unregister
 Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLADE_21.X64.0005.R00.1504101516 FFD8_X64_R_2015_04_10_1516 04/10/2015
 RIP: 0010:regulator_unregister
 Call Trace:
  <TASK>
  regulator_unregister
  devres_release_group
  i2c_device_remove
  device_release_driver_internal
  bus_remove_device
  device_del
  device_unregister
  x86_android_tablet_remove

On the Lenovo Yoga Tablet 2 series the bq24190 charger chip also provides
a 5V boost converter output for powering USB devices connected to the micro
USB port, the bq24190-charger driver exports this as a Vbus regulator.

On the 830 (8") and 1050 ("10") models this regulator is controlled by
a platform_device and x86_android_tablet_remove() removes platform_device-s
before i2c_clients so the consumer gets removed first.

But on the 1380 (13") model there is a lc824206xa micro-USB switch
connected over I2C and the extcon driver for that controls the regulator.
The bq24190 i2c-client *must* be registered first, because that creates
the regulator with the lc824206xa listed as its consumer. If the regulator
has not been registered yet the lc824206xa driver will end up getting
a dummy regulator.

Since in this case both the regulator provider and consumer are I2C
devices, the only way to ensure that the consumer is unregistered first
is to unregister the I2C devices in reverse order of in which they were
created.

For consistency and to avoid similar problems in the future change
x86_android_tablet_remove() to unregister all device types in reverse
order.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240406125058.13624-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/x86-android-tablets/core.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/platform/x86/x86-android-tablets/core.c b/drivers/platform/x86/x86-android-tablets/core.c
index a3415f1c0b5f8..6559bb4ea7305 100644
--- a/drivers/platform/x86/x86-android-tablets/core.c
+++ b/drivers/platform/x86/x86-android-tablets/core.c
@@ -278,25 +278,25 @@ static void x86_android_tablet_remove(struct platform_device *pdev)
 {
 	int i;
 
-	for (i = 0; i < serdev_count; i++) {
+	for (i = serdev_count - 1; i >= 0; i--) {
 		if (serdevs[i])
 			serdev_device_remove(serdevs[i]);
 	}
 
 	kfree(serdevs);
 
-	for (i = 0; i < pdev_count; i++)
+	for (i = pdev_count - 1; i >= 0; i--)
 		platform_device_unregister(pdevs[i]);
 
 	kfree(pdevs);
 	kfree(buttons);
 
-	for (i = 0; i < spi_dev_count; i++)
+	for (i = spi_dev_count - 1; i >= 0; i--)
 		spi_unregister_device(spi_devs[i]);
 
 	kfree(spi_devs);
 
-	for (i = 0; i < i2c_client_count; i++)
+	for (i = i2c_client_count - 1; i >= 0; i--)
 		i2c_unregister_device(i2c_clients[i]);
 
 	kfree(i2c_clients);
-- 
2.43.0

[PATCH AUTOSEL 6.9 14/23] platform/x86: x86-android-tablets: Add Lenovo Yoga Tablet 2 Pro 1380F/L data

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 3eee73ad42c3899d97e073bf2c41e7670a3c575c ]

The Lenovo Yoga Tablet 2 Pro 1380F/L is a x86 ACPI tablet which ships with
Android x86 as factory OS. Its DSDT contains a bunch of I2C devices which
are not actually there, causing various resource conflicts. Enumeration of
these is skipped through the acpi_quirk_skip_i2c_client_enumeration().

Add support for manually instantiating the I2C + other devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240406125058.13624-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../platform/x86/x86-android-tablets/dmi.c    |  18 ++
 .../platform/x86/x86-android-tablets/lenovo.c | 216 ++++++++++++++++++
 .../x86-android-tablets/x86-android-tablets.h |   1 +
 3 files changed, 235 insertions(+)

diff --git a/drivers/platform/x86/x86-android-tablets/dmi.c b/drivers/platform/x86/x86-android-tablets/dmi.c
index 5d6c12494f082..141a2d25e83be 100644
--- a/drivers/platform/x86/x86-android-tablets/dmi.c
+++ b/drivers/platform/x86/x86-android-tablets/dmi.c
@@ -104,6 +104,24 @@ const struct dmi_system_id x86_android_tablet_ids[] __initconst = {
 		},
 		.driver_data = (void *)&lenovo_yogabook_x91_info,
 	},
+	{
+		/*
+		 * Lenovo Yoga Tablet 2 Pro 1380F/L (13") This has more or less
+		 * the same BIOS as the 830F/L or 1050F/L (8" and 10") below,
+		 * but unlike the 8" / 10" models which share the same mainboard
+		 * this model has a different mainboard.
+		 * This match for the 13" model MUST come before the 8" + 10"
+		 * match since that one will also match the 13" model!
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "VALLEYVIEW C0 PLATFORM"),
+			DMI_MATCH(DMI_BOARD_NAME, "BYT-T FFD8"),
+			/* Full match so as to NOT match the 830/1050 BIOS */
+			DMI_MATCH(DMI_BIOS_VERSION, "BLADE_21.X64.0005.R00.1504101516"),
+		},
+		.driver_data = (void *)&lenovo_yoga_tab2_1380_info,
+	},
 	{
 		/*
 		 * Lenovo Yoga Tablet 2 830F/L or 1050F/L (The 8" and 10"
diff --git a/drivers/platform/x86/x86-android-tablets/lenovo.c b/drivers/platform/x86/x86-android-tablets/lenovo.c
index c297391955adb..16fa04d604a09 100644
--- a/drivers/platform/x86/x86-android-tablets/lenovo.c
+++ b/drivers/platform/x86/x86-android-tablets/lenovo.c
@@ -19,6 +19,7 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/lp855x.h>
 #include <linux/platform_device.h>
+#include <linux/power/bq24190_charger.h>
 #include <linux/reboot.h>
 #include <linux/rmi.h>
 #include <linux/spi/spi.h>
@@ -565,6 +566,221 @@ static void lenovo_yoga_tab2_830_1050_exit(void)
 	}
 }
 
+/*
+ * Lenovo Yoga Tablet 2 Pro 1380F/L
+ *
+ * The Lenovo Yoga Tablet 2 Pro 1380F/L mostly has the same design as the 830F/L
+ * and the 1050F/L so this re-uses some of the handling for that from above.
+ */
+static const char * const lc824206xa_chg_det_psy[] = { "lc824206xa-charger-detect" };
+
+static const struct property_entry lenovo_yoga_tab2_1380_bq24190_props[] = {
+	PROPERTY_ENTRY_STRING_ARRAY("supplied-from", lc824206xa_chg_det_psy),
+	PROPERTY_ENTRY_REF("monitored-battery", &generic_lipo_hv_4v35_battery_node),
+	PROPERTY_ENTRY_BOOL("omit-battery-class"),
+	PROPERTY_ENTRY_BOOL("disable-reset"),
+	{ }
+};
+
+static const struct software_node lenovo_yoga_tab2_1380_bq24190_node = {
+	.properties = lenovo_yoga_tab2_1380_bq24190_props,
+};
+
+/* For enabling the bq24190 5V boost based on id-pin */
+static struct regulator_consumer_supply lc824206xa_consumer = {
+	.supply = "vbus",
+	.dev_name = "i2c-lc824206xa",
+};
+
+static const struct regulator_init_data lenovo_yoga_tab2_1380_bq24190_vbus_init_data = {
+	.constraints = {
+		.name = "bq24190_vbus",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies = &lc824206xa_consumer,
+	.num_consumer_supplies = 1,
+};
+
+struct bq24190_platform_data lenovo_yoga_tab2_1380_bq24190_pdata = {
+	.regulator_init_data = &lenovo_yoga_tab2_1380_bq24190_vbus_init_data,
+};
+
+static const struct property_entry lenovo_yoga_tab2_1380_lc824206xa_props[] = {
+	PROPERTY_ENTRY_BOOL("onnn,enable-miclr-for-dcp"),
+	{ }
+};
+
+static const struct software_node lenovo_yoga_tab2_1380_lc824206xa_node = {
+	.properties = lenovo_yoga_tab2_1380_lc824206xa_props,
+};
+
+static const char * const lenovo_yoga_tab2_1380_lms303d_mount_matrix[] = {
+	"0", "-1", "0",
+	"-1", "0", "0",
+	"0", "0", "1"
+};
+
+static const struct property_entry lenovo_yoga_tab2_1380_lms303d_props[] = {
+	PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", lenovo_yoga_tab2_1380_lms303d_mount_matrix),
+	{ }
+};
+
+static const struct software_node lenovo_yoga_tab2_1380_lms303d_node = {
+	.properties = lenovo_yoga_tab2_1380_lms303d_props,
+};
+
+static const struct x86_i2c_client_info lenovo_yoga_tab2_1380_i2c_clients[] __initconst = {
+	{
+		/* BQ27541 fuel-gauge */
+		.board_info = {
+			.type = "bq27541",
+			.addr = 0x55,
+			.dev_name = "bq27541",
+			.swnode = &fg_bq24190_supply_node,
+		},
+		.adapter_path = "\\_SB_.I2C1",
+	}, {
+		/* bq24292i battery charger */
+		.board_info = {
+			.type = "bq24190",
+			.addr = 0x6b,
+			.dev_name = "bq24292i",
+			.swnode = &lenovo_yoga_tab2_1380_bq24190_node,
+			.platform_data = &lenovo_yoga_tab2_1380_bq24190_pdata,
+		},
+		.adapter_path = "\\_SB_.I2C1",
+		.irq_data = {
+			.type = X86_ACPI_IRQ_TYPE_GPIOINT,
+			.chip = "INT33FC:02",
+			.index = 2,
+			.trigger = ACPI_EDGE_SENSITIVE,
+			.polarity = ACPI_ACTIVE_HIGH,
+			.con_id = "bq24292i_irq",
+		},
+	}, {
+		/* LP8557 Backlight controller */
+		.board_info = {
+			.type = "lp8557",
+			.addr = 0x2c,
+			.dev_name = "lp8557",
+			.platform_data = &lenovo_lp8557_pwm_and_reg_pdata,
+		},
+		.adapter_path = "\\_SB_.I2C3",
+	}, {
+		/* LC824206XA Micro USB Switch */
+		.board_info = {
+			.type = "lc824206xa",
+			.addr = 0x48,
+			.dev_name = "lc824206xa",
+			.swnode = &lenovo_yoga_tab2_1380_lc824206xa_node,
+		},
+		.adapter_path = "\\_SB_.I2C3",
+		.irq_data = {
+			.type = X86_ACPI_IRQ_TYPE_GPIOINT,
+			.chip = "INT33FC:02",
+			.index = 1,
+			.trigger = ACPI_LEVEL_SENSITIVE,
+			.polarity = ACPI_ACTIVE_LOW,
+			.con_id = "lc824206xa_irq",
+		},
+	}, {
+		/* AL3320A ambient light sensor */
+		.board_info = {
+			.type = "al3320a",
+			.addr = 0x1c,
+			.dev_name = "al3320a",
+		},
+		.adapter_path = "\\_SB_.I2C5",
+	}, {
+		/* LSM303DA accelerometer + magnetometer */
+		.board_info = {
+			.type = "lsm303d",
+			.addr = 0x1d,
+			.dev_name = "lsm303d",
+			.swnode = &lenovo_yoga_tab2_1380_lms303d_node,
+		},
+		.adapter_path = "\\_SB_.I2C5",
+	}, {
+		/* Synaptics RMI touchscreen */
+		.board_info = {
+			.type = "rmi4_i2c",
+			.addr = 0x38,
+			.dev_name = "rmi4_i2c",
+			.platform_data = &lenovo_yoga_tab2_830_1050_rmi_pdata,
+		},
+		.adapter_path = "\\_SB_.I2C6",
+		.irq_data = {
+			.type = X86_ACPI_IRQ_TYPE_APIC,
+			.index = 0x45,
+			.trigger = ACPI_EDGE_SENSITIVE,
+			.polarity = ACPI_ACTIVE_HIGH,
+		},
+	}
+};
+
+static const struct platform_device_info lenovo_yoga_tab2_1380_pdevs[] __initconst = {
+	{
+		/* For the Tablet 2 Pro 1380's custom fast charging driver */
+		.name = "lenovo-yoga-tab2-pro-1380-fastcharger",
+		.id = PLATFORM_DEVID_NONE,
+	},
+};
+
+const char * const lenovo_yoga_tab2_1380_modules[] __initconst = {
+	"bq24190_charger",            /* For the Vbus regulator for lc824206xa */
+	NULL
+};
+
+static int __init lenovo_yoga_tab2_1380_init(void)
+{
+	int ret;
+
+	/* To verify that the DMI matching works vs the 830 / 1050 models */
+	pr_info("detected Lenovo Yoga Tablet 2 Pro 1380F/L\n");
+
+	ret = lenovo_yoga_tab2_830_1050_init_codec();
+	if (ret)
+		return ret;
+
+	/* SYS_OFF_PRIO_FIRMWARE + 1 so that it runs before acpi_power_off */
+	lenovo_yoga_tab2_830_1050_sys_off_handler =
+		register_sys_off_handler(SYS_OFF_MODE_POWER_OFF, SYS_OFF_PRIO_FIRMWARE + 1,
+					 lenovo_yoga_tab2_830_1050_power_off, NULL);
+	if (IS_ERR(lenovo_yoga_tab2_830_1050_sys_off_handler))
+		return PTR_ERR(lenovo_yoga_tab2_830_1050_sys_off_handler);
+
+	return 0;
+}
+
+static struct gpiod_lookup_table lenovo_yoga_tab2_1380_fc_gpios = {
+	.dev_id = "serial0-0",
+	.table = {
+		GPIO_LOOKUP("INT33FC:00", 57, "uart3_txd", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("INT33FC:00", 61, "uart3_rxd", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
+static struct gpiod_lookup_table * const lenovo_yoga_tab2_1380_gpios[] = {
+	&lenovo_yoga_tab2_830_1050_codec_gpios,
+	&lenovo_yoga_tab2_1380_fc_gpios,
+	NULL
+};
+
+const struct x86_dev_info lenovo_yoga_tab2_1380_info __initconst = {
+	.i2c_client_info = lenovo_yoga_tab2_1380_i2c_clients,
+	.i2c_client_count = ARRAY_SIZE(lenovo_yoga_tab2_1380_i2c_clients),
+	.pdev_info = lenovo_yoga_tab2_1380_pdevs,
+	.pdev_count = ARRAY_SIZE(lenovo_yoga_tab2_1380_pdevs),
+	.gpio_button = &lenovo_yoga_tab2_830_1050_lid,
+	.gpio_button_count = 1,
+	.gpiod_lookup_tables = lenovo_yoga_tab2_1380_gpios,
+	.bat_swnode = &generic_lipo_hv_4v35_battery_node,
+	.modules = lenovo_yoga_tab2_1380_modules,
+	.init = lenovo_yoga_tab2_1380_init,
+	.exit = lenovo_yoga_tab2_830_1050_exit,
+};
+
 /* Lenovo Yoga Tab 3 Pro YT3-X90F */
 
 /*
diff --git a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
index 468993edfeee2..821dc094b0254 100644
--- a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
+++ b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
@@ -112,6 +112,7 @@ extern const struct x86_dev_info czc_p10t;
 extern const struct x86_dev_info lenovo_yogabook_x90_info;
 extern const struct x86_dev_info lenovo_yogabook_x91_info;
 extern const struct x86_dev_info lenovo_yoga_tab2_830_1050_info;
+extern const struct x86_dev_info lenovo_yoga_tab2_1380_info;
 extern const struct x86_dev_info lenovo_yt3_info;
 extern const struct x86_dev_info medion_lifetab_s10346_info;
 extern const struct x86_dev_info nextbook_ares8_info;
-- 
2.43.0

[PATCH AUTOSEL 6.9 23/23] platform/x86: p2sb: Don't init until unassigned resources have been assigned

[Sasha Levin]

From: Ben Fradella <bfradell@netapp.com>

[ Upstream commit 2c6370e6607663fc5fa0fd9ed58e2e01014898c7 ]

The P2SB could get an invalid BAR from the BIOS, and that won't be fixed
up until pcibios_assign_resources(), which is an fs_initcall().

- Move p2sb_fs_init() to an fs_initcall_sync(). This is still early
  enough to avoid a race with any dependent drivers.

- Add a check for IORESOURCE_UNSET in p2sb_valid_resource() to catch
  unset BARs going forward.

- Return error values from p2sb_fs_init() so that the 'initcall_debug'
  cmdline arg provides useful data.

Signed-off-by: Ben Fradella <bfradell@netapp.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240509164905.41016-1-bcfradella@proton.me
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/p2sb.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/platform/x86/p2sb.c b/drivers/platform/x86/p2sb.c
index 3d66e1d4eb1f5..1ac30034f3e59 100644
--- a/drivers/platform/x86/p2sb.c
+++ b/drivers/platform/x86/p2sb.c
@@ -56,12 +56,9 @@ static int p2sb_get_devfn(unsigned int *devfn)
 	return 0;
 }
 
-static bool p2sb_valid_resource(struct resource *res)
+static bool p2sb_valid_resource(const struct resource *res)
 {
-	if (res->flags)
-		return true;
-
-	return false;
+	return res->flags & ~IORESOURCE_UNSET;
 }
 
 /* Copy resource from the first BAR of the device in question */
@@ -220,16 +217,20 @@ EXPORT_SYMBOL_GPL(p2sb_bar);
 
 static int __init p2sb_fs_init(void)
 {
-	p2sb_cache_resources();
-	return 0;
+	return p2sb_cache_resources();
 }
 
 /*
- * pci_rescan_remove_lock to avoid access to unhidden P2SB devices can
- * not be locked in sysfs pci bus rescan path because of deadlock. To
- * avoid the deadlock, access to P2SB devices with the lock at an early
- * step in kernel initialization and cache required resources. This
- * should happen after subsys_initcall which initializes PCI subsystem
- * and before device_initcall which requires P2SB resources.
+ * pci_rescan_remove_lock() can not be locked in sysfs PCI bus rescan path
+ * because of deadlock. To avoid the deadlock, access P2SB devices with the lock
+ * at an early step in kernel initialization and cache required resources.
+ *
+ * We want to run as early as possible. If the P2SB was assigned a bad BAR,
+ * we'll need to wait on pcibios_assign_resources() to fix it. So, our list of
+ * initcall dependencies looks something like this:
+ *
+ * ...
+ * subsys_initcall (pci_subsys_init)
+ * fs_initcall     (pcibios_assign_resources)
  */
-fs_initcall(p2sb_fs_init);
+fs_initcall_sync(p2sb_fs_init);
-- 
2.43.0