[PATCH AUTOSEL 6.6 03/16] platform/x86: toshiba_acpi: Add quirk for buttons on Z830

[PATCH AUTOSEL 6.6 03/16] platform/x86: toshiba_acpi: Add quirk for buttons on Z830

[Sasha Levin]

From: Arvid Norlander <lkml@vorpal.se>

[ Upstream commit 23f1d8b47d125dcd8c1ec62a91164e6bc5d691d0 ]

The Z830 has some buttons that will only work properly as "quickstart"
buttons. To enable them in that mode, a value between 1 and 7 must be
used for HCI_HOTKEY_EVENT. Windows uses 0x5 on this laptop so use that for
maximum predictability and compatibility.

As there is not yet a known way of auto detection, this patch uses a DMI
quirk table. A module parameter is exposed to allow setting this on other
models for testing.

Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240131111641.4418-3-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/toshiba_acpi.c | 36 ++++++++++++++++++++++++++---
 1 file changed, 33 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 291f14ef67024..2a5a651235fe6 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -57,6 +57,11 @@ module_param(turn_on_panel_on_resume, int, 0644);
 MODULE_PARM_DESC(turn_on_panel_on_resume,
 	"Call HCI_PANEL_POWER_ON on resume (-1 = auto, 0 = no, 1 = yes");
 
+static int hci_hotkey_quickstart = -1;
+module_param(hci_hotkey_quickstart, int, 0644);
+MODULE_PARM_DESC(hci_hotkey_quickstart,
+		 "Call HCI_HOTKEY_EVENT with value 0x5 for quickstart button support (-1 = auto, 0 = no, 1 = yes");
+
 #define TOSHIBA_WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100"
 
 /* Scan code for Fn key on TOS1900 models */
@@ -136,6 +141,7 @@ MODULE_PARM_DESC(turn_on_panel_on_resume,
 #define HCI_ACCEL_MASK			0x7fff
 #define HCI_ACCEL_DIRECTION_MASK	0x8000
 #define HCI_HOTKEY_DISABLE		0x0b
+#define HCI_HOTKEY_ENABLE_QUICKSTART	0x05
 #define HCI_HOTKEY_ENABLE		0x09
 #define HCI_HOTKEY_SPECIAL_FUNCTIONS	0x10
 #define HCI_LCD_BRIGHTNESS_BITS		3
@@ -2730,10 +2736,15 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)
 		return -ENODEV;
 
 	/*
+	 * Enable quickstart buttons if supported.
+	 *
 	 * Enable the "Special Functions" mode only if they are
 	 * supported and if they are activated.
 	 */
-	if (dev->kbd_function_keys_supported && dev->special_functions)
+	if (hci_hotkey_quickstart)
+		result = hci_write(dev, HCI_HOTKEY_EVENT,
+				   HCI_HOTKEY_ENABLE_QUICKSTART);
+	else if (dev->kbd_function_keys_supported && dev->special_functions)
 		result = hci_write(dev, HCI_HOTKEY_EVENT,
 				   HCI_HOTKEY_SPECIAL_FUNCTIONS);
 	else
@@ -3257,7 +3268,14 @@ static const char *find_hci_method(acpi_handle handle)
  * works. toshiba_acpi_resume() uses HCI_PANEL_POWER_ON to avoid changing
  * the configured brightness level.
  */
-static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
+#define QUIRK_TURN_ON_PANEL_ON_RESUME		BIT(0)
+/*
+ * Some Toshibas use "quickstart" keys. On these, HCI_HOTKEY_EVENT must use
+ * the value HCI_HOTKEY_ENABLE_QUICKSTART.
+ */
+#define QUIRK_HCI_HOTKEY_QUICKSTART		BIT(1)
+
+static const struct dmi_system_id toshiba_dmi_quirks[] = {
 	{
 	 /* Toshiba Portégé R700 */
 	 /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
@@ -3265,6 +3283,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
 		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R700"),
 		},
+	 .driver_data = (void *)QUIRK_TURN_ON_PANEL_ON_RESUME,
 	},
 	{
 	 /* Toshiba Satellite/Portégé R830 */
@@ -3274,6 +3293,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
 		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "R830"),
 		},
+	 .driver_data = (void *)QUIRK_TURN_ON_PANEL_ON_RESUME,
 	},
 	{
 	 /* Toshiba Satellite/Portégé Z830 */
@@ -3281,6 +3301,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
 		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "Z830"),
 		},
+	 .driver_data = (void *)(QUIRK_TURN_ON_PANEL_ON_RESUME | QUIRK_HCI_HOTKEY_QUICKSTART),
 	},
 };
 
@@ -3289,6 +3310,8 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 	struct toshiba_acpi_dev *dev;
 	const char *hci_method;
 	u32 dummy;
+	const struct dmi_system_id *dmi_id;
+	long quirks = 0;
 	int ret = 0;
 
 	if (toshiba_acpi)
@@ -3441,8 +3464,15 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 	}
 #endif
 
+	dmi_id = dmi_first_match(toshiba_dmi_quirks);
+	if (dmi_id)
+		quirks = (long)dmi_id->driver_data;
+
 	if (turn_on_panel_on_resume == -1)
-		turn_on_panel_on_resume = dmi_check_system(turn_on_panel_on_resume_dmi_ids);
+		turn_on_panel_on_resume = !!(quirks & QUIRK_TURN_ON_PANEL_ON_RESUME);
+
+	if (hci_hotkey_quickstart == -1)
+		hci_hotkey_quickstart = !!(quirks & QUIRK_HCI_HOTKEY_QUICKSTART);
 
 	toshiba_wwan_available(dev);
 	if (dev->wwan_supported)
-- 
2.43.0

[PATCH AUTOSEL 6.6 08/16] platform/x86: x86-android-tablets: Add Lenovo Yoga Tablet 2 Pro 1380F/L data

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 3eee73ad42c3899d97e073bf2c41e7670a3c575c ]

The Lenovo Yoga Tablet 2 Pro 1380F/L is a x86 ACPI tablet which ships with
Android x86 as factory OS. Its DSDT contains a bunch of I2C devices which
are not actually there, causing various resource conflicts. Enumeration of
these is skipped through the acpi_quirk_skip_i2c_client_enumeration().

Add support for manually instantiating the I2C + other devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240406125058.13624-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../platform/x86/x86-android-tablets/dmi.c    |  18 ++
 .../platform/x86/x86-android-tablets/lenovo.c | 216 ++++++++++++++++++
 .../x86-android-tablets/x86-android-tablets.h |   1 +
 3 files changed, 235 insertions(+)

diff --git a/drivers/platform/x86/x86-android-tablets/dmi.c b/drivers/platform/x86/x86-android-tablets/dmi.c
index 5d6c12494f082..141a2d25e83be 100644
--- a/drivers/platform/x86/x86-android-tablets/dmi.c
+++ b/drivers/platform/x86/x86-android-tablets/dmi.c
@@ -104,6 +104,24 @@ const struct dmi_system_id x86_android_tablet_ids[] __initconst = {
 		},
 		.driver_data = (void *)&lenovo_yogabook_x91_info,
 	},
+	{
+		/*
+		 * Lenovo Yoga Tablet 2 Pro 1380F/L (13") This has more or less
+		 * the same BIOS as the 830F/L or 1050F/L (8" and 10") below,
+		 * but unlike the 8" / 10" models which share the same mainboard
+		 * this model has a different mainboard.
+		 * This match for the 13" model MUST come before the 8" + 10"
+		 * match since that one will also match the 13" model!
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "VALLEYVIEW C0 PLATFORM"),
+			DMI_MATCH(DMI_BOARD_NAME, "BYT-T FFD8"),
+			/* Full match so as to NOT match the 830/1050 BIOS */
+			DMI_MATCH(DMI_BIOS_VERSION, "BLADE_21.X64.0005.R00.1504101516"),
+		},
+		.driver_data = (void *)&lenovo_yoga_tab2_1380_info,
+	},
 	{
 		/*
 		 * Lenovo Yoga Tablet 2 830F/L or 1050F/L (The 8" and 10"
diff --git a/drivers/platform/x86/x86-android-tablets/lenovo.c b/drivers/platform/x86/x86-android-tablets/lenovo.c
index 26a4ef670ad7c..56fdc384e800f 100644
--- a/drivers/platform/x86/x86-android-tablets/lenovo.c
+++ b/drivers/platform/x86/x86-android-tablets/lenovo.c
@@ -17,6 +17,7 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/lp855x.h>
 #include <linux/platform_device.h>
+#include <linux/power/bq24190_charger.h>
 #include <linux/reboot.h>
 #include <linux/rmi.h>
 #include <linux/spi/spi.h>
@@ -539,6 +540,221 @@ static void lenovo_yoga_tab2_830_1050_exit(void)
 	}
 }
 
+/*
+ * Lenovo Yoga Tablet 2 Pro 1380F/L
+ *
+ * The Lenovo Yoga Tablet 2 Pro 1380F/L mostly has the same design as the 830F/L
+ * and the 1050F/L so this re-uses some of the handling for that from above.
+ */
+static const char * const lc824206xa_chg_det_psy[] = { "lc824206xa-charger-detect" };
+
+static const struct property_entry lenovo_yoga_tab2_1380_bq24190_props[] = {
+	PROPERTY_ENTRY_STRING_ARRAY("supplied-from", lc824206xa_chg_det_psy),
+	PROPERTY_ENTRY_REF("monitored-battery", &generic_lipo_hv_4v35_battery_node),
+	PROPERTY_ENTRY_BOOL("omit-battery-class"),
+	PROPERTY_ENTRY_BOOL("disable-reset"),
+	{ }
+};
+
+static const struct software_node lenovo_yoga_tab2_1380_bq24190_node = {
+	.properties = lenovo_yoga_tab2_1380_bq24190_props,
+};
+
+/* For enabling the bq24190 5V boost based on id-pin */
+static struct regulator_consumer_supply lc824206xa_consumer = {
+	.supply = "vbus",
+	.dev_name = "i2c-lc824206xa",
+};
+
+static const struct regulator_init_data lenovo_yoga_tab2_1380_bq24190_vbus_init_data = {
+	.constraints = {
+		.name = "bq24190_vbus",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies = &lc824206xa_consumer,
+	.num_consumer_supplies = 1,
+};
+
+struct bq24190_platform_data lenovo_yoga_tab2_1380_bq24190_pdata = {
+	.regulator_init_data = &lenovo_yoga_tab2_1380_bq24190_vbus_init_data,
+};
+
+static const struct property_entry lenovo_yoga_tab2_1380_lc824206xa_props[] = {
+	PROPERTY_ENTRY_BOOL("onnn,enable-miclr-for-dcp"),
+	{ }
+};
+
+static const struct software_node lenovo_yoga_tab2_1380_lc824206xa_node = {
+	.properties = lenovo_yoga_tab2_1380_lc824206xa_props,
+};
+
+static const char * const lenovo_yoga_tab2_1380_lms303d_mount_matrix[] = {
+	"0", "-1", "0",
+	"-1", "0", "0",
+	"0", "0", "1"
+};
+
+static const struct property_entry lenovo_yoga_tab2_1380_lms303d_props[] = {
+	PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", lenovo_yoga_tab2_1380_lms303d_mount_matrix),
+	{ }
+};
+
+static const struct software_node lenovo_yoga_tab2_1380_lms303d_node = {
+	.properties = lenovo_yoga_tab2_1380_lms303d_props,
+};
+
+static const struct x86_i2c_client_info lenovo_yoga_tab2_1380_i2c_clients[] __initconst = {
+	{
+		/* BQ27541 fuel-gauge */
+		.board_info = {
+			.type = "bq27541",
+			.addr = 0x55,
+			.dev_name = "bq27541",
+			.swnode = &fg_bq24190_supply_node,
+		},
+		.adapter_path = "\\_SB_.I2C1",
+	}, {
+		/* bq24292i battery charger */
+		.board_info = {
+			.type = "bq24190",
+			.addr = 0x6b,
+			.dev_name = "bq24292i",
+			.swnode = &lenovo_yoga_tab2_1380_bq24190_node,
+			.platform_data = &lenovo_yoga_tab2_1380_bq24190_pdata,
+		},
+		.adapter_path = "\\_SB_.I2C1",
+		.irq_data = {
+			.type = X86_ACPI_IRQ_TYPE_GPIOINT,
+			.chip = "INT33FC:02",
+			.index = 2,
+			.trigger = ACPI_EDGE_SENSITIVE,
+			.polarity = ACPI_ACTIVE_HIGH,
+			.con_id = "bq24292i_irq",
+		},
+	}, {
+		/* LP8557 Backlight controller */
+		.board_info = {
+			.type = "lp8557",
+			.addr = 0x2c,
+			.dev_name = "lp8557",
+			.platform_data = &lenovo_lp8557_pwm_and_reg_pdata,
+		},
+		.adapter_path = "\\_SB_.I2C3",
+	}, {
+		/* LC824206XA Micro USB Switch */
+		.board_info = {
+			.type = "lc824206xa",
+			.addr = 0x48,
+			.dev_name = "lc824206xa",
+			.swnode = &lenovo_yoga_tab2_1380_lc824206xa_node,
+		},
+		.adapter_path = "\\_SB_.I2C3",
+		.irq_data = {
+			.type = X86_ACPI_IRQ_TYPE_GPIOINT,
+			.chip = "INT33FC:02",
+			.index = 1,
+			.trigger = ACPI_LEVEL_SENSITIVE,
+			.polarity = ACPI_ACTIVE_LOW,
+			.con_id = "lc824206xa_irq",
+		},
+	}, {
+		/* AL3320A ambient light sensor */
+		.board_info = {
+			.type = "al3320a",
+			.addr = 0x1c,
+			.dev_name = "al3320a",
+		},
+		.adapter_path = "\\_SB_.I2C5",
+	}, {
+		/* LSM303DA accelerometer + magnetometer */
+		.board_info = {
+			.type = "lsm303d",
+			.addr = 0x1d,
+			.dev_name = "lsm303d",
+			.swnode = &lenovo_yoga_tab2_1380_lms303d_node,
+		},
+		.adapter_path = "\\_SB_.I2C5",
+	}, {
+		/* Synaptics RMI touchscreen */
+		.board_info = {
+			.type = "rmi4_i2c",
+			.addr = 0x38,
+			.dev_name = "rmi4_i2c",
+			.platform_data = &lenovo_yoga_tab2_830_1050_rmi_pdata,
+		},
+		.adapter_path = "\\_SB_.I2C6",
+		.irq_data = {
+			.type = X86_ACPI_IRQ_TYPE_APIC,
+			.index = 0x45,
+			.trigger = ACPI_EDGE_SENSITIVE,
+			.polarity = ACPI_ACTIVE_HIGH,
+		},
+	}
+};
+
+static const struct platform_device_info lenovo_yoga_tab2_1380_pdevs[] __initconst = {
+	{
+		/* For the Tablet 2 Pro 1380's custom fast charging driver */
+		.name = "lenovo-yoga-tab2-pro-1380-fastcharger",
+		.id = PLATFORM_DEVID_NONE,
+	},
+};
+
+const char * const lenovo_yoga_tab2_1380_modules[] __initconst = {
+	"bq24190_charger",            /* For the Vbus regulator for lc824206xa */
+	NULL
+};
+
+static int __init lenovo_yoga_tab2_1380_init(void)
+{
+	int ret;
+
+	/* To verify that the DMI matching works vs the 830 / 1050 models */
+	pr_info("detected Lenovo Yoga Tablet 2 Pro 1380F/L\n");
+
+	ret = lenovo_yoga_tab2_830_1050_init_codec();
+	if (ret)
+		return ret;
+
+	/* SYS_OFF_PRIO_FIRMWARE + 1 so that it runs before acpi_power_off */
+	lenovo_yoga_tab2_830_1050_sys_off_handler =
+		register_sys_off_handler(SYS_OFF_MODE_POWER_OFF, SYS_OFF_PRIO_FIRMWARE + 1,
+					 lenovo_yoga_tab2_830_1050_power_off, NULL);
+	if (IS_ERR(lenovo_yoga_tab2_830_1050_sys_off_handler))
+		return PTR_ERR(lenovo_yoga_tab2_830_1050_sys_off_handler);
+
+	return 0;
+}
+
+static struct gpiod_lookup_table lenovo_yoga_tab2_1380_fc_gpios = {
+	.dev_id = "serial0-0",
+	.table = {
+		GPIO_LOOKUP("INT33FC:00", 57, "uart3_txd", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("INT33FC:00", 61, "uart3_rxd", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
+static struct gpiod_lookup_table * const lenovo_yoga_tab2_1380_gpios[] = {
+	&lenovo_yoga_tab2_830_1050_codec_gpios,
+	&lenovo_yoga_tab2_1380_fc_gpios,
+	NULL
+};
+
+const struct x86_dev_info lenovo_yoga_tab2_1380_info __initconst = {
+	.i2c_client_info = lenovo_yoga_tab2_1380_i2c_clients,
+	.i2c_client_count = ARRAY_SIZE(lenovo_yoga_tab2_1380_i2c_clients),
+	.pdev_info = lenovo_yoga_tab2_1380_pdevs,
+	.pdev_count = ARRAY_SIZE(lenovo_yoga_tab2_1380_pdevs),
+	.gpio_button = &lenovo_yoga_tab2_830_1050_lid,
+	.gpio_button_count = 1,
+	.gpiod_lookup_tables = lenovo_yoga_tab2_1380_gpios,
+	.bat_swnode = &generic_lipo_hv_4v35_battery_node,
+	.modules = lenovo_yoga_tab2_1380_modules,
+	.init = lenovo_yoga_tab2_1380_init,
+	.exit = lenovo_yoga_tab2_830_1050_exit,
+};
+
 /* Lenovo Yoga Tab 3 Pro YT3-X90F */
 
 /*
diff --git a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
index e46e1128acc81..3613152aaf86c 100644
--- a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
+++ b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
@@ -99,6 +99,7 @@ extern const struct x86_dev_info czc_p10t;
 extern const struct x86_dev_info lenovo_yogabook_x90_info;
 extern const struct x86_dev_info lenovo_yogabook_x91_info;
 extern const struct x86_dev_info lenovo_yoga_tab2_830_1050_info;
+extern const struct x86_dev_info lenovo_yoga_tab2_1380_info;
 extern const struct x86_dev_info lenovo_yt3_info;
 extern const struct x86_dev_info medion_lifetab_s10346_info;
 extern const struct x86_dev_info nextbook_ares8_info;
-- 
2.43.0

[PATCH AUTOSEL 6.6 16/16] platform/x86: p2sb: Don't init until unassigned resources have been assigned

[Sasha Levin]

From: Ben Fradella <bfradell@netapp.com>

[ Upstream commit 2c6370e6607663fc5fa0fd9ed58e2e01014898c7 ]

The P2SB could get an invalid BAR from the BIOS, and that won't be fixed
up until pcibios_assign_resources(), which is an fs_initcall().

- Move p2sb_fs_init() to an fs_initcall_sync(). This is still early
  enough to avoid a race with any dependent drivers.

- Add a check for IORESOURCE_UNSET in p2sb_valid_resource() to catch
  unset BARs going forward.

- Return error values from p2sb_fs_init() so that the 'initcall_debug'
  cmdline arg provides useful data.

Signed-off-by: Ben Fradella <bfradell@netapp.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240509164905.41016-1-bcfradella@proton.me
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/p2sb.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/platform/x86/p2sb.c b/drivers/platform/x86/p2sb.c
index a64f56ddd4a44..053be5c5e0cad 100644
--- a/drivers/platform/x86/p2sb.c
+++ b/drivers/platform/x86/p2sb.c
@@ -56,12 +56,9 @@ static int p2sb_get_devfn(unsigned int *devfn)
 	return 0;
 }
 
-static bool p2sb_valid_resource(struct resource *res)
+static bool p2sb_valid_resource(const struct resource *res)
 {
-	if (res->flags)
-		return true;
-
-	return false;
+	return res->flags & ~IORESOURCE_UNSET;
 }
 
 /* Copy resource from the first BAR of the device in question */
@@ -220,16 +217,20 @@ EXPORT_SYMBOL_GPL(p2sb_bar);
 
 static int __init p2sb_fs_init(void)
 {
-	p2sb_cache_resources();
-	return 0;
+	return p2sb_cache_resources();
 }
 
 /*
- * pci_rescan_remove_lock to avoid access to unhidden P2SB devices can
- * not be locked in sysfs pci bus rescan path because of deadlock. To
- * avoid the deadlock, access to P2SB devices with the lock at an early
- * step in kernel initialization and cache required resources. This
- * should happen after subsys_initcall which initializes PCI subsystem
- * and before device_initcall which requires P2SB resources.
+ * pci_rescan_remove_lock() can not be locked in sysfs PCI bus rescan path
+ * because of deadlock. To avoid the deadlock, access P2SB devices with the lock
+ * at an early step in kernel initialization and cache required resources.
+ *
+ * We want to run as early as possible. If the P2SB was assigned a bad BAR,
+ * we'll need to wait on pcibios_assign_resources() to fix it. So, our list of
+ * initcall dependencies looks something like this:
+ *
+ * ...
+ * subsys_initcall (pci_subsys_init)
+ * fs_initcall     (pcibios_assign_resources)
  */
-fs_initcall(p2sb_fs_init);
+fs_initcall_sync(p2sb_fs_init);
-- 
2.43.0