X86 platform drivers
 help / color / mirror / Atom feed
From: Vadim Pasternak <vadimp@nvidia.com>
To: <hdegoede@redhat.com>
Cc: <michaelsh@nvidia.com>, <crajank@nvidia.com>,
	<fradensky@nvidia.com>, <oleksandrs@nvidia.com>,
	<platform-driver-x86@vger.kernel.org>,
	"Vadim Pasternak" <vadimp@nvidia.com>
Subject: [PATCH platform-next v2 01/10] mellanox: Relocate mlx-platform driver
Date: Mon, 13 Jan 2025 10:43:23 +0200	[thread overview]
Message-ID: <20250113084337.24763-2-vadimp@nvidia.com> (raw)
In-Reply-To: <20250113084337.24763-1-vadimp@nvidia.com>

Move 'mlx-platform' driver 'x86' to 'mellanox' folder.

Motivation to allow running it on systems with ARM architecture.

Since drivers/platform/x86/mlx-platform.c is rellocated to folder
drivers/platform/x86/, remove "MELLANOX PLATFORM DRIVER" item.
This driver will be located under "MELLANOX HARDWARE PLATFORM SUPPORT"
item.

Add reference for Documentation/ABI/testing/sysfs-driver-mlxreg-io under
"MELLANOX HARDWARE PLATFORM SUPPORT".

Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
---
 MAINTAINERS                                       |  7 +------
 drivers/platform/mellanox/Kconfig                 | 13 +++++++++++++
 drivers/platform/mellanox/Makefile                |  1 +
 drivers/platform/{x86 => mellanox}/mlx-platform.c |  0
 drivers/platform/x86/Kconfig                      | 13 -------------
 drivers/platform/x86/Makefile                     |  1 -
 6 files changed, 15 insertions(+), 20 deletions(-)
 rename drivers/platform/{x86 => mellanox}/mlx-platform.c (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 6bb4ec0c162a..7d12a8f08f52 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14705,6 +14705,7 @@ M:	Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
 M:	Vadim Pasternak <vadimp@nvidia.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Supported
+F:	Documentation/ABI/testing/sysfs-driver-mlxreg-io
 F:	Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
 F:	drivers/platform/mellanox/
 F:	include/linux/platform_data/mlxreg.h
@@ -14775,12 +14776,6 @@ F:	Documentation/leds/leds-mlxcpld.rst
 F:	drivers/leds/leds-mlxcpld.c
 F:	drivers/leds/leds-mlxreg.c
 
-MELLANOX PLATFORM DRIVER
-M:	Vadim Pasternak <vadimp@nvidia.com>
-L:	platform-driver-x86@vger.kernel.org
-S:	Supported
-F:	drivers/platform/x86/mlx-platform.c
-
 MEMBARRIER SUPPORT
 M:	Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
 M:	"Paul E. McKenney" <paulmck@kernel.org>
diff --git a/drivers/platform/mellanox/Kconfig b/drivers/platform/mellanox/Kconfig
index f7dfa0e785fd..aa760f064a17 100644
--- a/drivers/platform/mellanox/Kconfig
+++ b/drivers/platform/mellanox/Kconfig
@@ -14,6 +14,19 @@ menuconfig MELLANOX_PLATFORM
 
 if MELLANOX_PLATFORM
 
+config MLX_PLATFORM
+	tristate "Mellanox Technologies platform support"
+	depends on ACPI && I2C && PCI
+	select REGMAP
+	help
+	  This option enables system support for the Mellanox Technologies
+	  platform. The Mellanox systems provide data center networking
+	  solutions based on Virtual Protocol Interconnect (VPI) technology
+	  enable seamless connectivity to 56/100Gb/s InfiniBand or 10/40/56GbE
+	  connection.
+
+	  If you have a Mellanox system, say Y or M here.
+
 config MLXREG_HOTPLUG
 	tristate "Mellanox platform hotplug driver support"
 	depends on HWMON
diff --git a/drivers/platform/mellanox/Makefile b/drivers/platform/mellanox/Makefile
index 04703c0416b1..ba56485cbe8c 100644
--- a/drivers/platform/mellanox/Makefile
+++ b/drivers/platform/mellanox/Makefile
@@ -3,6 +3,7 @@
 # Makefile for linux/drivers/platform/mellanox
 # Mellanox Platform-Specific Drivers
 #
+obj-$(CONFIG_MLX_PLATFORM)	+= mlx-platform.o
 obj-$(CONFIG_MLXBF_BOOTCTL)	+= mlxbf-bootctl.o
 obj-$(CONFIG_MLXBF_PMC)		+= mlxbf-pmc.o
 obj-$(CONFIG_MLXBF_TMFIFO)	+= mlxbf-tmfifo.o
diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/mellanox/mlx-platform.c
similarity index 100%
rename from drivers/platform/x86/mlx-platform.c
rename to drivers/platform/mellanox/mlx-platform.c
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 3875abba5a79..92a3d5be0e36 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1010,19 +1010,6 @@ config SERIAL_MULTI_INSTANTIATE
 	  To compile this driver as a module, choose M here: the module
 	  will be called serial-multi-instantiate.
 
-config MLX_PLATFORM
-	tristate "Mellanox Technologies platform support"
-	depends on ACPI && I2C && PCI
-	select REGMAP
-	help
-	  This option enables system support for the Mellanox Technologies
-	  platform. The Mellanox systems provide data center networking
-	  solutions based on Virtual Protocol Interconnect (VPI) technology
-	  enable seamless connectivity to 56/100Gb/s InfiniBand or 10/40/56GbE
-	  connection.
-
-	  If you have a Mellanox system, say Y or M here.
-
 config TOUCHSCREEN_DMI
 	bool "DMI based touchscreen configuration info"
 	depends on ACPI && DMI && I2C=y && TOUCHSCREEN_SILEAD
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index e1b142947067..8849c0a36419 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -122,7 +122,6 @@ obj-$(CONFIG_TOPSTAR_LAPTOP)	+= topstar-laptop.o
 # Platform drivers
 obj-$(CONFIG_FW_ATTR_CLASS)		+= firmware_attributes_class.o
 obj-$(CONFIG_SERIAL_MULTI_INSTANTIATE)	+= serial-multi-instantiate.o
-obj-$(CONFIG_MLX_PLATFORM)		+= mlx-platform.o
 obj-$(CONFIG_TOUCHSCREEN_DMI)		+= touchscreen_dmi.o
 obj-$(CONFIG_WIRELESS_HOTKEY)		+= wireless-hotkey.o
 obj-$(CONFIG_X86_ANDROID_TABLETS)	+= x86-android-tablets/
-- 
2.44.0


  reply	other threads:[~2025-01-13  8:44 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-13  8:43 [PATCH platform-next v2 00/10] platform/mellanox: Add support for new systems, amendments, relocate mlx-platform module Vadim Pasternak
2025-01-13  8:43 ` Vadim Pasternak [this message]
2025-01-13  8:43 ` [PATCH platform-next v2 02/10] platform: mellanox: mlx-platform: Cosmetic changes Vadim Pasternak
2025-01-13  8:43 ` [PATCH platform-next v2 03/10] platform: mellanox: mlx-platform: Change register name Vadim Pasternak
2025-01-13  8:43 ` [PATCH platform-next v2 04/10] platform_data/mlxreg: Add capability bit and mask fields Vadim Pasternak
2025-01-13  8:43 ` [PATCH platform-next v2 05/10] platform/mellanox: mlxreg-hotplug: Add support for new flavor of capability registers Vadim Pasternak
2025-01-13 16:25   ` Ilpo Järvinen
2025-01-13 21:53     ` Vadim Pasternak
2025-01-13  8:43 ` [PATCH platform-next v2 06/10] platform/mellanox: mlxreg-dpu: Add initial support for Nvidia DPU Vadim Pasternak
2025-01-13 17:05   ` Ilpo Järvinen
2025-01-13  8:43 ` [PATCH platform-next v2 07/10] platform: mellanox: Introduce support of Nvidia smart switch Vadim Pasternak
2025-01-13 17:12   ` Ilpo Järvinen
2025-01-13 22:09     ` Vadim Pasternak
2025-01-14 14:13       ` Ilpo Järvinen
2025-01-13  8:43 ` [PATCH platform-next v2 08/10] platform: mellanox: mlx-platform: Add support for new Nvidia system Vadim Pasternak
2025-01-13 17:16   ` Ilpo Järvinen
2025-01-13  8:43 ` [PATCH platform-next v2 09/10] platform: mellanox: nvsw-sn2200: Add support for new system flavour Vadim Pasternak
2025-01-13  8:43 ` [PATCH platform-next v2 10/10] Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces Vadim Pasternak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250113084337.24763-2-vadimp@nvidia.com \
    --to=vadimp@nvidia.com \
    --cc=crajank@nvidia.com \
    --cc=fradensky@nvidia.com \
    --cc=hdegoede@redhat.com \
    --cc=michaelsh@nvidia.com \
    --cc=oleksandrs@nvidia.com \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox